Upgrading the components in your guitar’s control cavity should give you significant improvements in tone and component life. If your guitar has single-coil pickups, buy 250K pots. If it’s packing ’buckers, go for the 500K jobs. If your ax has humbuckers and single-coils, I recommend 500K pots. This could make your single-coils sound a bit brighter than normal, but it will unlock your humbuckers’ full potential. For this job you’ll also need a soldering iron, solder, safety goggles, wire cutters, and a camera, to help you keep track of your original wiring connections (your cellphone will work just fine for this).
At that time European craftsmen operated under the guild system. The guitar (in its modern form) was a relatively new instrument, and most guitar makers were members of the Cabinet Makers’ Guild. The Violin Makers’ Guild claimed exclusive rights to manufacture musical instruments. The Violin Makers’ Guild filed appeals on three occasions – the first in 1806 – to prevent cabinet makers from producing guitars. Johann Martin is mentioned in a surviving submission dated 1832.
3) Had a little fret buzz on the high E but that was probably more my fault than anything else because I changed the light gauge strings to extra lights which sometimes requires the neck adjustment to be loosened. This guitar is set up from the factory with light gauge strings which means if you put on extra lights, the neck will have a tendency to straighten out too much which brings your strings closer to the frets and sometimes results in fret buzz. An easy fix though...just take a straight edge, like an aluminum yardstick, and lay on the neck, or hold down the string on the first and last fret and you should have just a slight space (approx. 1/64" - 1/32") between the frets and strings in the middle of your fret board. In other words, contrary to popular belief the neck is supposed to have an ever-so-slight dip in the middle and IS NOT supposed to be perfectly straight. My guitar required about a 3/4 turn (loosened) on the neck adjustment to fix the fret buzz. And, remember when adjusting the neck don't expect immediate results. Give the neck time to settle-in adjusting a little at a time and then waiting a couple hours or so before checking it again. If you still have fret buzz after adjusting the neck then it most likely will be at the nut because Yamaha keeps their action really low at the nut. If so, just take a piece of paper and put it under the string at the nut which should be an easy fix.
Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.
I think singing with confidence without too much doubt was a satisfying thing. It was, artistically, very satisfying to be covering subject matter that means something to me. I think a little bit of that was getting to know yourself. And just the simple fact that I was ready to do it now. Everything else I'd done since going out on my own in '87 has been absolutely amazing to me, and I feel like the luckiest guitar player alive, and I am very grateful.
A touring pro friend of my was given one of these years ago by the McPherson company as a promotional endorsement for him to play on stage. After playing his I have wanted one for years. They are indeed expensive, but recently I was able to purchase one. In my 45 years of playing I have always gone through multiple examples of each guitar I've owned before purchasing, and have (and do) own Martins, Taylors, Gibsons, Tacomas, Fenders, Seagulls, Alvarez, Yamaha, etc. which were all really good in their own right. However, nothing I've played has been as good as the McPherson in terms of tone, volume, sustain, note clarity, playability, workmanship; it's useful whether played solo or in an ensemble setting, and for chords or single line playing. It is indeed the last acoustic guitar that I will ever buy.
In a way, the Ovation story (to use Robert Frost’s famous metaphor) is one of roads not taken. Of course, as the philosopher, Hegel, so neatly noted long ago, the paths tend to join up again, and the resulting synthesis works out fine in the end. It certainly worked that way for Charlie Kaman, whose choice of paths ultimately led to the synthesis (in more ways than one!) of Ovation guitars.
Here we have another great Yamaha Its Sound is truly WELL beyond its price point someone will be very pleased. aprox..1972-74 YAMAHA FG160 WOW! . ...This is a Gorgeous MARTIN style REPLICA and for the money compares very well to the original in quality materials used..sweet vintage SPRUCE TOP now wonderfully ambered in color from age just too cool, The Back - Sides & Neck are all made from choice AAA Mahogany just what you would expect from an expensive Martin or Gibson...only you would expect to pay much more for one of those , but this is a rare early non "Nippon Gakki" model with the Red Label from Korea.. These early issue Red Label Guitars from Korea utilize the very same materials that were made in Japan. These components were used under strict quality control and 100% assembled in Korea from the very same vintage wood - components & parts as the Japan made Yamaha's. We have had many of these Red Labeled Yamaha's in the 180's & 160's currently and over the years I see up close and in person the very high grade AA mahogany neck s sides & back & the same nice nickel tuners & hardware the very same one piece solid neck no scarf joint at the back of the headstock area like the later Korean & Chinese examples ... This era exhibits just the same just as nice woods as those Japanese big dollar players but " SOME" not all are hidden treasures and are still a real bargain today when compared to the Japanese Red Label versions or a Martin or even Japan made models of this quality...fit & finish & the materials on this guitar are very nice! This guitar does not take the back seat to the Red Label Nippon Gakki version at all. The action is very EZ to play and the TONE is simply wonderful..The Condition is very good++ to excellent vintage it is not mint,and it is not beat..it has natural minor play wear and dings associated with a well loved and played quality guitar it has all the rich patina now of a true vintage acoustic and is quite beautiful in its own right. This guitar has a good history of care its a California guitar where the climate is stable and quite favorable to guitars and was adult owned & loved. This guitar has the preferable a nice MEATY U Shaped Premium Mahogany one piece solid NECK, the frets are still good, The Rosewood is gorgeous too it looks to be Premium grade as well..You will not be disappointed with this guitar at this price the sound is rich like a an expensive $1,000+ guitar, big tone ...no repairs, structural damage..It comes with a new set of Martin strings installed ready to play out of the box. TRULY STUNNING, SEE MORE ... This baby is nice and sweet in person...very nice, , with a classic MARTIN LIKE feel & Sweet-Tone that simply is very hard to beat. The neck is STRAIGHT and the frets are fine w/plenty of life left,this baby plays real nice she stays in tune very well.. .nice workmanship & choice select materials used....You will not be disappointed with this FINE YAMAHA FG160 guitar with NICE TONE & SOUND...its a real Great Player ....This guitars condition is rated at a 8+ Very good+ or better and is very good to excellent condition only a few very minor dings can be seen. this is a real Vintage guitar" and as you can see its in Gorgeous shape!. no known problems cracks-breaks-repairs with no other known issues at all. This one is is 100% READY TO GO!!! its in very good to excellent condition a solid 8+ OR BETTER. This .
Reading the comments, looks like people dont like Ibanez, in my 15 years of guitar playing I have own three, all mid-lowend models in the RG series, those things are of amazing value they can take a lot of abuse and still sound great. I dare to compare them whit my SL3 jackson a guitar that costed me three times more than any Ibanez I had own, the only big difference are the pickups because other than that the built quallity is much the same and I dare to say Ibanez uses better compenets (frets, pots, switch) than Jackson...
If you are trying to find the best electric guitar for beginners but you lack the time to do the necessary research in order to find a quality product, this short introduction should help you out. After reading plenty of electric guitar reviews and after comparing top-notch products, we have reached the conclusion that Epiphone Les Paul STANDARD is the model that you should have in mind. This device has a beautiful mahogany body and a maple top that is said to deliver an easy to distinguish classic tone. As a plus, the model comes outfitted with Alnico Classic humbucker pickups that secure a subtle and warm tone. If the Epiphone Les Paul STANDARD is out of stock, we recommend that you check out the Epiphone Les Paul STANDARD Electric as it is a reliable alternative that you might equally enjoy.
When it comes to combo amps, the speakers included will usually give you a good idea of what to expect in terms of power and performance. While bass amps are in a category of their own, guitar combos tend to use speakers of anywhere between 3″ right up to 15″. Obviously, the bigger the speaker, the better suited it is for the stage, while having more than one is an instant upgrade to the power available.
Semi-hollow body electric guitars are basically a middle ground between a solid body electric and a fully hollow body electric guitar. Jazz, country, and rock guitarists alike may gravitate towards semi-hollow body electric guitars for several reasons. One of the main reasons is that semi-hollow body guitars still produce that rich, resonant sound of a hollow instrument, but they typically have a solid or sometimes chambered center block in between the top and back. This design helps fight off that unwanted body-resonant feedback we spoke about before while even adding some extra sustain. Gibson offers a wide selection of semi-hollow body electric guitars, which include the iconic Gibson ES-335. Guitar brands such as Gretsch and Ibanez are also widely recognized for their semi-hollow body electric guitars.