Numerous sources, such as Physics by John D. Cutnell and Kenneth W. Johnson, state that the human ear can hear sounds ranging from 20 hertz to 20,000 hertz. A guitar is going to fall in this range because it wouldn’t make good business sense to produce an instrument that can only be heard by dogs. From a scientific perspective, just about everything within the normal human range would be considered effective, since the instrument accomplishes its goal. Beyond that, a researcher wouldn’t be able to designate what’s good.

When I first plugged it in, it made a sound like it was "fretting out" if you put a bar at the twelfth fret position. That's a pretty good feat, given that the guitar has no frets. It turned out that someone had cranked up the pole pieces for extra gain, but had cranked them so far that the strings made contact with them when the guitar was played. A quick tweak right in the store with a jeweler's screwdriver sorted them out and revealed the lovely vintage sound of this little beastie. Supro developed a neat strings-through pickup system with staggered pole pieces that this guitar features.

Modulation is where we step away from the more subtle (relatively) effects which serve to colour an existing tone, and into areas where you can truly begin to add flavour and texture to your tone. There are a few main types of modulation; chorus, phase, tremolo, wah and flange. Chorus subtly mimics your tone with a microscopically detuned duplicate, which when played together adds a nice warm layer to the sound. As an example, play the ‘e’ note on your second string (fifth fret) and the open ‘e’ first string at the same time. Naturally, there is a cent or two difference in the tuning. But you can see that two virtually (but not exactly) instances of the same note makes everything sound a bit bigger and a bit wider. That, in an admittedly basic form, is the chorus effect.
The way that cabinet manufacturers state the power handling capabilities of a speaker cabinet (or an individual speaker) can also be confusing. An important figure for a speaker cabinet's power handling capabilities is its rated wattage-handling capabilities as "RMS". For example, a bass speaker cabinet's back panel may state that it has a power handling capacity of 500 watts RMS. This means that the speaker can handle an average power, from a power amplifier, of 500 watts. The speaker can also handle occasional peaks or "transient" bursts of higher wattages, so long as these are brief. Where is becomes confusing is that some manufacturers also list "peak power", also called "maximum power", "max power" or "burst power". Peak power is the power-handling ability of the speaker for very short bursts of high-wattage signal. The RMS figure is much more important than the "peak power" or "max power" figure. To add to the confusion, some manufacturers state the "program power" capabilities of their speaker cabinet, which can be a vague and less defined term. Reputable, major manufacturers state the RMS output and/or power-handling capabilities of their gear.
The Seagull S6 is another very popular choice for those looking for an affordable but great sounding acoustic. Owners claim it sounds as good as guitars in the $800-$1500 range. The S6 has a cedar top with cherry back and sides. It features a wider nut, which means this guitar will be a great choice for those playing finger style or that have larger hands. Owners of this guitar are singing it’s praises, saying that they have no regrets. The sound of this guitar is big, yet soft. Described as being “alive” with tone. Seagull has been making quality guitars at an affordable price for many years, so the S6 will not disappoint. See more on this guitar here.
Bass players who do not have a combo amp who are playing live shows can connect their bass to a DI unit and from there to the PA system. In a well-equipped nightclub or music bar, the audio engineer can then route the bass signal to a stage monitor suitable for bass, so the bass player and band can hear the bass tone. Some standalone bass preamplifier pedals have a DI output, so this output can similarly be connected to a PA system. Bass players who are playing in small venues (coffeehouses, small pubs, etc.) will typically need to bring their own bass combo amp (or an alternative amp, such as a keyboard amp combo), because very small venues often have a very small, low-powered PA system which is used mainly for vocals. Some small venues do not have monitor speakers, or they have only one, in front of the lead vocalist. Bass players who do not have a combo amp who are laying down tracks in the recording studio can plug into a DI unit (any professional recording studio will have one), which is connected to the audio console; the audio engineer can provide the bassist with the sound of their instrument through headphones.

Let’s face it, without people listening and responding to your music, there’s not much point in you throwing all you have into that hobby or business. Furthermore, it is relatively hard to be a passionate musician and to work in a more reliably financial-rewarding job alongside it, so one of your primary goals as a musician is bound to be to crack the music business and start making millions.
The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.

A good custom shop will have insight based on their experience that will help make the project better. That’s part of being custom — making concepts a reality. But there is more to running a custom shop than simply having the ability and experience to create someone’s dream. Figuring out what that is requires a little digging. The concept is buried in first understanding the other meanings of the word custom. Although “made-to-order” is a correct characterization where you can personalized the headtsock with your name or initials and you can CUSTOMIZE YOUR GUITAR: Mahogany, Alder, Maple, Bass Wood, Right/Left handed guitar, Body colour, Neck profile, No dots on fretboard and Fret size.Our Custom Shop Guitars referred to in this site as drawing "inspiration" from the major guitar brands and any reference to custom shop brand names or "Inspired by" are made strictly for comparison purposes only.

Tuning Instabily: Problems with tuning stability are almost always cuased by improper tuning technique (always tune UP to the note) or a binding nut. (There are RARE occasions where the string isn't seating correctly at the bridge, and we're not considering problems with set up regarding a tremolo) Even the cheapest geared tuners don't "slip" as a rule. If a geared tuner is failing it will make a "poping" type of sound as the gear jumps teeth. If the gears are loose, it is possible to pull a string flat with extensive (excessive?) use of a tremolo. If notes are going sharp it is due to the nut binding. What happens is excessive tension builds up between the tuner and the nut in order to overcome the binding. Then as you play the vibration of the string allows it to wiggle through the slot equalizing the tension, and making the string sharp. See above for info on a binding nut. If a fretted note is sharp it is an indication that the nut slots are not deep enough (or excessive presure with high frets/ scalloped or worn fretboard). If a string is going flat, it is always bridge related. Either a problem with the string seating fully (common w/ trapeeze tailpieces and ball ends in vintage tremolos (the reason they came up w/ bullet ends)) or binding on a rough saddle/ the edge of the trem block. Again, it is possible to cause a tuner to back off with extream tremolo, but rare.
Back when they were starting, Jackson guitars were only available to the elite few, mostly heavy metal artists. After being acquired by Fender, Jackson has since expanded into the entry level realm with mass produced versions of their popular guitar designs, including the Dinky shape. The JS11 Dinky does just that, making the Jackson Dinky a beginner and student friendly instrument that more players can enjoy.
Most new electric guitars tend to ship pre-strung with "super light" guitar strings. Depending on your technique, and the style of music you play, that string gauge may or may not be too light for you. The following is a list of the standard string gauges included with each set of electric guitar strings. Note though that different manufacturers include slightly different string gauges in their sets of strings.
Description: Body: Mahogany - Top Wood: Maple - Curly - Neck Wood: Mahogany - Fingerboard: Ebony - Binding: Natural - Frets: 24, Medium - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge Construction: Ebony - Cutaway: Double - Hardware: Gold, Nickel, 2x Volume Control, 2x Tone Control, 3-Way Switch, Waverly Tuners - Pickups: Fralin P-90 - String Instrument Finish: Golden Natural, Winter Solstice, Hickory Burst, Aged Scotch, Faded Onyx - Made In: America
Finally, new by ’41 was the No. 130 Supro Rio Spanish Guitar. This was a slothead Regal roundhole flattop done up in a “radiant blonde hardwood body.” It had an 13″ body and logo plate on the head. In place of the typical acoustic bridge was the same square pickup/control panel found on the Clipper. The cord was permanently attached and sort of snuck out from under the control plate on the top. Cost was $33.

You should add the plugins on They are all free and are great. They use them as tools to help them design physical amps, so they are very accurate and almost zero-latency. They have a few amps and pre-amps, 2 OD pedals and even a cab modeller which is more than enough to get you started. The Emmisary is a freakin' miracle. It can do any tone (I use it for metal, blues, clean) but it's best for molten, in-your-face heavy metal since it has a 4-way EQ on the lead channel.
That's a bit if an exaggeration but you're allowed. I would venture to claim that the snobs are those who proselytize Fender and Gibson as being the best (especially Gibson). It's been demonstrated a million times over that they are not. Which does not mean they don't make guitars many people want and like. Especially Fender (I have a GREAT Highway One Strat) who have managed to reach a wider audience with the pricing structure of the Fender brand than Gibson has with the Gibson name. The reason we see so many of them in the hands of pros (and their sheepish followers) is that these companies can afford to buy "stage presence". I would put PRS in that group too; however PRS makes better production guitars than both the above. And I'm not being a snob since I can't afford a PRS.

In Vietnam, electric guitars are often used as an instrument in cải lương music (traditional southern Vietnamese folk opera), sometimes as a substitute for certain traditional stringed instruments like the Đàn nguyệt (two-stringed lute) when they are not available. Electric guitars used in cải lương are played in finger vibrato (string bending), with no amplifiers or sound effects.

Engl has to be the most underrated amplifiers on the market. I have an engl gigmaster 15 and it is pure awesomeness. No fender cleans but if you want fender cleans buy a fender. The gain section is where this thing shines. I haven't used any kind of distortion pedal since getting this amp. More gain on tap than any Marshall I've ever owned or played. Getting ready to upgrade to the ironball and can't wait. If you like metal, hardcore, punk, grunge, sludge, doom you should look at an engl. This thing will even do blues extremely well without a ts9. It will take pedals very well as this is a 15 watt amp with an effects loop. Wow, right. Won't get that with a tiny terror. Plus these are German designed and built unlike the terror series built in China.
By the late 1960s, as electric guitarists in rock bands began using powerful, loud guitar stacks to play large venues, bassists needed a large, powerful bass stack to keep up in these performance settings.[3] The Acoustic 360 was a "200-watt, solid state head designed to drive the 361 cabinet, a rear-firing 18” speaker enclosure".[3] The engineers who designed the amp and cabinet in 1967, Harvey Gerst and Russ Allee, mounted the 18" speaker in a folded horn enclosure; the 360 amp had a built-in fuzz bass effects unit.[4] The Acoustic 360 and its 361 cabinet " the bass world ready for the Woodstocks, Altamonts and giant festival concerts" and it was used by notable players such as funk bassist Larry Graham, Led Zeppelin's bassist John Paul Jones and jazz fusion player Jaco Pastorius.[3] John Paul Jones used two of the amp/cabs in Led Zeppelin; Dave Brown used them with Santana; John McVie played with the amp/cab in the beginning years of Fleetwood Mac.[4] In December 1967, the loud sound of the Acoustic 360 led to The Doors getting "...arrested for noise violations".
The solution is pretty simple actually. When setting your intonation it should look like two sets of steps. You should never need to move the saddles all the way forward or turn them around. If you want to adjust something do it in a way that allows you to keep this configuration. You do that and you'll never have to worry about tuning issues period, let alone a g-string.
Quite often, power chords are played with only down-strums, and often with a technique called palm muting, which might make it less vital to mute the unused strings. But it is REALLY important to mute them because many songs do use up- and down-strums with power chords (‘Smells Like Teen Spirit' springs to mind). Also, if you don't mute them, and you play loud with distortion, the strings might ring out—even if you don't pick them—and which will make your chords sound messy. So make sure you get your string muting sorted now!
I bought a Yamaha EC-10 classical at a garage sale for $5.00. It was still in the cardboard box and never played according to the seller. The guitar is full size and looks cool and has real good volume and good bass, but I'd still like to get more bass out of it. I'm thinking of making some modifications to my guitar so that I can fit it with actual bass guitar strings, nylon ones. A friend of mine said I'd wreck up my guitar if I did this. Would I wreck the guitar putting bass strings on it or could I make a bass out of it?
The 50-watt version is driven by seven 12AX7 preamp tubes with two 6L6s powering the amp, which is surprisingly huge in output – capable of filling an auditorium no problem (depending on your cab, of course). Other features that make this such a popular choice among gigging guitarists include three customizable channels and a four-button footswitch.
Semi-Hollow: As the name suggests, you’re getting a smaller type of sound box while some support of amplification at the same time. This allows us to use an amp (with proper adjustments — there will definitely be some feedback worries of course), but they’re a lot lighter in weight than solid bodies and people tend to say they’re more versatile than our previously explained type. The superlatives used when it comes to hollow-body sound usually include “warm”, “bright”, and nice overtones. Preferred guitarists? Jazz, rockabilly, vintage country, etc.

Maple is a very hard type of wood with good tonal qualities and good sustain. Guitar necks are traditionally made from maple, in part because of its strength, and in part because the material can highlight and amplify the wood in the body. Maple is also often used as a top for the guitar body, partly because it is beautiful (think flame, or quilted maple tops), and partly because it can brighten a sound that would otherwise be murky.

Ask yourself this question right at the beginning. Before buying a guitar you have to make sure of the kind of style you are comfortable in- be it the jazz and blues or be it country, soul or pop. Only once you are sure of the kind of style you are in for, you should move forward to buying your new guitar. Make the wrong choice, and you will have to regret for it later on.

Hawaiian lap steels are not in the American Teisco Del Rey catalog, however, five laps remained in the ’66 Japanese Teisco catalog. Still available was the Harp-8, an 8-string console with two pickups and some sort of electronics controlled by four floor pedals. Still around were the H-39, the H-905 and the self-amplified TRH-1. Also available was the H-850, a single-pickup 6-string very similar to the H-905.
As a rule, open-backed cabinets tend to have a different low-frequency characteristic to closed ones, partly because no air is trapped inside the box to act as a pneumatic spring. One characteristic is that low-frequency sounds, such as damped lower strings, cause the speaker cone to move a considerable distance, producing what is affectionately known as cabinet thump. In addition, there is interaction between the sound coming from the front and the back of the cabinet, which may cause some frequencies to cancel and others to be reinforced.
{ "thumbImageID": "Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard/H76503000004001", "defaultDisplayName": "Fender Standard Telecaster Left Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Sunburst Gloss Maple Fretboard", "sku": "sku:site51310681125015", "price": "499.99", "regularPrice": "599.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard-1310681125015.gc", "skuImageId": "Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard/H76503000004001", "brandName": "Fender", "stickerDisplayText": "Price Drop", "stickerClass": "stickerEmphasis", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black Gloss Maple Fretboard", "sku": "sku:site51310681125013", "price": "499.99", "regularPrice": "599.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Telecaster-Left-Handed-Electric-Guitar-Black-Gloss-Maple-Fretboard-1310681125013.gc", "skuImageId": "Standard-Telecaster-Left-Handed-Electric-Guitar-Black-Gloss-Maple-Fretboard/H76503000002001", "brandName": "Fender", "stickerDisplayText": "Price Drop", "stickerClass": "stickerEmphasis", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
SG Special is pretty much the same thing as the Les Paul 100. The most obvious difference is the body style. Other than that, you get very similar electronics and overall build quality. A lot of people learned their first chords on this guitar, still keeping it as one of their favorite axes. I’ve played this thing a few times and it definitely has some juice.
Harmony Hollywood H38- OK, here's the one we will sell. She's about the same as above but with opposite color combo. This one has a nice vintage DeArmond Gold Foil Pickup. Action is medium, but if you would like a lower action, we will be happy to cut that bridge a bit down. Guitar is in  nice vintage condition. All original except the period style Rosewood Bridge and reproduction Harmony Pick Guard. SOLD
The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").

If you’re recording or practicing at home, or you think your own amplifier sounds like garbage you’ll enjoy the Cab Sim switch. This when activated, causes your signal to simulate the sound of a mic'd up guitar cabinet rather than your direct amp signal, which is extremely useful when you want high quality recordings at home direct to a DAW, or you just can’t seem to make your amplifier sound good!

Among the favorite brands of Gretsch lie the signature variants Brian Setzer and Chet Atkins models. Whereas, its Jet and Duo Jet are equally worthy. All these models are aimed explicitly at Jazz. In fact, you can think of them for Jazz as what you call Jackson for metal. For intermediate and pro players looking for affordability, its Electromatic Series is the desired option.
{ "thumbImageID": "Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Black/J73166000001000", "defaultDisplayName": "Squier Affinity Series PJ Bass Pack with Fender Rumble 15W 1x8 Bass Combo Amp", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000053269", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "499.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Black-1500000053269.gc", "skuImageId": "Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Black/J73166000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Brown Sunburst", "sku": "sku:site51500000053270", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "499.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Brown-Sunburst-1500000053270.gc", "skuImageId": "Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Brown-Sunburst/J73166000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Lee Ranaldo of Sonic Youth used a Kent Polaris I solid body (with lots of duct tape on it) and several Kent 800-series guitars - a white 820 and a sunburst 821 12-string with 10 strings on it, shown at left. Since the B and high-E strings on a 12-string set are normally tuned to the same note, he left the duplicate strings off. He uses several alternate tunings with his guitars.
I have a really nice classical C-620. Got it for 50 dollars. Like new but now 40 year old wood. I went to a local store to sample what they had and to get the sound and build quality on my Lyle I had to look at name brands upwards of 500 dollars. That's where I stopped and realized I had gotten a great deal. I won't sell mine. Should last a long time. I just got a nice case for it, used, for 50. So. 100 dollars for a great guitar and case. I also got an attachable pickup.
Frank Bowers Interestingly enough, they have completely different approaches to the job. Bo cranks his Gibson Firebird straight through a Peavey 6505 half stack with nothing in line but a tuner, while Frank rocks out on his Gibson Les Paul Customs through a Digitech GSP-2101 preamp, a Mesa/Boogie TriAxis preamp, a TC Electronics G-Major processor, a Mesa/Boogie 2:90 power amp, and a Marshall 4x12 cabinet. During their show, they each take jaw-dropping solos, and they share the spotlight on some of the best-executed twin leads since Thin Lizzy’s “The Boys Are Back in Town.”
Lotus started with the elite league of Japanese craftsmen and initially made excellent Morris-branded guitars, but trying to keep up with the heavyweights such as Matsumoku Aria Pro II and Fuji-Gen Gakki Ibanez was difficult. Mismanagement and, especially, the inability to market their initial superb-quality guitars soon had Lotus' owners scrambling for cheaper labor, ending in India with poor quality and eventually no takers for their product, as Chinese and Indonesian guitar producers stepped up with instruments of comparable quality at similar prices.
The simplest close-miking technique using a single mic is one that’s familiar to anyone who has gigged in a venue large enough to have a full sound-support system. Stick a Shure SM57 or similar dynamic mic within an inch of the grille, and away you go. This technique frequently delivers a direct, punchy, in-your-face guitar tone that feels muscular in rock-oriented tracks. If you have a Royer R-121 ribbon mic or some other good ribbon or condenser option that can handle the sound-pressure levels involved in close-miking a guitar cab, these will offer variations on the traditional mids-forward SM57 flavor. In many circumstances this simple technique proves entirely adequate, or at least makes a good foundation to build upon, but you still need to consider exactly where to position that mic, and subtle variations of approach will reveal nuanced differences in the tones you can achieve. Also, if you’re playing a combo or extension cab with more than one speaker, listen carefully to determine which is the best-sounding speaker – or the one that’s right for the track – and mic that one (if you’re not sure, and have two appropriate mics, record two speakers to separate tracks to select from later, more of which below).
Made most famous with the release of Bon Jovi’s 1986 Top 10 hit song, “Wanted Dead or Alive,” Richie Sambora’s double neck Ovation became one of the world’s most instantly recognizable guitar models. The all-new acoustic/electric Richie Sambora Signature Series Elite Double Neck model features a Sitka Spruce top in Gloss Black, Ebony fingerboard inlaid with mother of pearl stars, Teak/Paduk/Walnut/Mesquite inlaid rosette/epaulettes, gold hardware, a mother of pearl star inlay on the body and finished with Sambora’s signature in gold on the headstock.
Stripped holes: small holes without much tension on them (i.e. pickguard screws) can be repaired with super glue (gel stuff). Put some glue in the hole and screw the screw in about 1/2 way. The glue will not stick to the plated screw, and will form threads. More severely stripped holes or holes w/ more tension on them (i.e. strap button screws) require pieces of toothpick be glued in w/ wood glue. Larger holes w/ alot of tension (i.e. neck mounting screws) require the hole be drilled out and a hardwood dowel glued in place.
With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.
All-fifths tuning is a tuning in intervals of perfect fifths like that of a mandolin, cello or violin; other names include "perfect fifths" and "fifths".[35] It has a wide range, thus it requires an appropriate range of string gauges. A high b' string is particularly thin and taut, which can be avoided by shifting the scale down by several steps or by a fifth.
In 1964 Hohner released The Beatles Harmonica Kit which was sold in a blister package, much like most Hohner harmonicas nowadays, retailed for $2.95, and help what Hohner calls "bring about a new popularity upsurge of the Hohner harmonica on both sides of the Atlantic.".[6] In the 1970s Hohner began manufacturing acoustic guitars,[7] and re-producing electric guitars.[5]
Prior to dennis, i had never taken guitar lessons. Always tried to teach myself. I struggled since i had no structure, i would consistantly get lost, which would make me put the guitar down due to frustration. Deciding to hire dennis was a break thru for me, and honestly wish i would have looked into it much sooner. Not only has my skills progressed, which they due weekly at a much faster rate then when i was trying to learn on my own, but my confidence and motivatation has increased greatly. I look forward to meeting with dennis each week and building off of what he taught me the previous week. The amount of patience dennis has is great, and the way he explains different things so that i understand is awsome. Would definetly recommend dennis to anyone, whether they have just purchased their first guitar, or they have tried numerous times to teach themselves, or even if you have alot of the basics down, but looking to take your knowledge and playing to the next level.
Let's look at how the professionals go about combining the close and ambient techniques we've looked at so far, in order to create specific custom setups for different recordings. Joe Barresi, for example, relies heavily on the trusty SM57 and MD421 combination, but he'll choose from a variety of other mics to give character to particular sounds. "The two microphones I use most for recording electric guitars are the Shure SM57 and the Sennheiser MD421, often both, close up, placed at the edge of the speaker, where the speaker centre meets the cone, or, if I'm looking for a more bright sound, dead centre. When I want more low end, I may have an AKG C414 on there, and when I'm after a little more personality, a Neumann U87, backed up a foot, or a ribbon mic, like the Royer 122, or an RCA BK5 or 77."
You have all the control you need over your effects and you can use all three at the same time, too – ideal for those who like to create big walls of sound. The delay features a tap tempo control, whilst the FX loop connectivity allows you to hook up any other effects pedals you might have before the delay, which ensures the tonal qualities of those pedals are intact.
It has been stated repeatedly that the CEO is a challenge, toxic whatever and yes, all of it is true. Many if not most people who take a management position here don't last a year. This is especially true at Corporate where at any given time half of the positions are open because employee turnover is off the charts and they are horrible at recruiting talent to get replacements hired. That's a really bad combination to have in a company. So the first question you have to ask yourself is: do you want to show a job that only lasted six to twelve months on your resume with a company that has a positive, almost cult like global brand image? Or another way, how will you explain your short tenure to the next company you interview with and make them believe you weren't the problem? When I was outside Nashville and told people I worked for Gibson 100% of them said "that's a great company" even though they had no clue. It's highly likely your next potential employer will think that way as well.

Well technically, the floor and the ceiling do shape the tone, post amp. Room acoustics are a major factor in the quality of sound recordings. Also Dan isn't wrong. Each thing that vibrates that eventually moves the pickup (while a note is being played or sustained) will disrupt the magnetic field. In physics there is hardly ever an instance where things have absolutely zero effect on the things around them. It comes down to the significance of the effect. For example, if something moves the pickup .05 picometers six times a second, then it likely has a negligible effect on the sound (i.e. our ears are not capable of detecting any difference. There does come a point where other variables do begin to change the characteristics of the sound. Additionally, as a string is struck, due to the rigidity (or slight lack thereof) the neck and body will vibrate, changing the distance between bridge and nut. The shortening and lengthening of this distance will then change the vibration frequency of the string. This can result in the dampening of vibration or potentially slight amplification of frequencies or overtones. Overall, it is impossible to say with absolute certainty that something does not have an effect on something else in this case. The truth, however, is that the degree to which the change is noticeable may not be detectable by the human ear.
Every guitarist seeks to produce an expressive and distinctive tone. Unfortunately, figuring out what kind of gear you need can be a baffling proposition. Here are the three main equipment categories that comprise your music-making rig: your electric guitar, guitar amps, and effects pedals and units. These components all work together to create your sound. And because you can swap out equipment and change settings, the creative possibilities are virtually limitless.
4. Vox VT40X 40-watt 1x10 Combo Amp ($249.99): The Vox is another modeling combo that utilizes a Valvetronix tube preamp to give you the sound qualities of a tube amp. With 13 onboard effects, you can channel quality effects without having a pedalboard at your disposal. Vox’s Virtual Elements Technology has allowed them to carefully recreate up to 20 realistic models of very sought-after amp tones, all within an attractive looking package.
I think for somebody reasonable, the right answer would be that yes, it has an effect on the tone of the guitar and the notes coming off the strings, but not nearly as much as other factors in the design of the guitar. If you think I'm wrong then you should read more about the overtone series, the physics of sound, difference tones, and how sounds interact both as vibrations moving through air, and digitally as numbers in a computer. It's just not as simple as to say wood doesn't have a magnetic field so therefore it can't possibly affect the tone. It's true that much of what we hear is a result of the ear-brain axis, but there are also many fundamentally measurable physical properties of sound as it occurs over time (as all sounds do) that can easily explain why different types or shapes of wood could have a subtle but real effect on the tone.
While Gretsch is known for semi-hollow and full hollow body guitars, and it is only fitting that one of their semi-hollow chambered body models make this list, specifically the Gretsch Electromatic Pro Jet Bigsby. Being part of their Electromatic line, brings with it all the Gretsch goodness minus the premium appointments, at a very accessible price point. It is a true archtop thinline guitar, that passed the same attention to quality and detail that more expensive Gretsch guitars also go through.
The Axe-Fx II is also the world’s most powerful hardware multi-effects. To use it with an amp, just create presets with no AMP or CAB blocks. Some people run separate chains of effects —some before the amp and others in its loop. This is called the “four cable method.” Or better still: match the sound of your amp and send THAT to front of house while you use your amp on stage in all its glory.
Although early Les Paul imitations in the 1960s and 1970s, such as those made by Höfner, Hagström, Harmony Company and Greco Guitars differed from Gibson’s design, with different electronics, and even bolt-on necks, in the late 1970s some Japanese companies came very close to perfecting copies of the original 1958–60 Standards. These guitars later became known as “lawsuit” guitars. The lawsuit was brought by the Norlin Corporation, the parent company of Gibson guitars, in 1977, and was based on an Ibanez headstock design that had been discontinued by 1976. Ibanez settled out of court, and by 1978 had begun making guitars from their own designs.[citation needed]
The shadows are his home and keeping Gotham's citizens safe is his sustenance. Darkness envelops his every move and his legend lives in the whispers of each passerby. Known by many names — the Caped Crusader, the Dark Knight, Batman — this man lives to protect. But by pitting himself against the criminals of a city, he has only made his laundry list of powerful enemies grow. One after another, a new and nefarious threat has risen up and one after another Batman succeeded in bringing them down. But what happens when those menacing masterminds join forces? Who will rescue Gotham when a deadly roster of depraved lunatics gangs up on the shadowed warrior? Who will save us all? The finale to the legendary Arkham series explodes onto your screen in the most adrenaline-pumping storyline yet. The Scarecrow has returned to Gotham City and he has united a terrifying team of super villains, including Penguin, Two-Face and Harley Quinn. For the first time in the franchise, you get to step behind the wheel of the iconic Batmobile as you harness the power of Batman and scramble to outwit the wicked gang after your blood. Tear through the streets and soar across the skyline in heart-pounding gameplay that will suck you in and force you to ask yourself if you have what it takes to save Gotham. Do you have it within you to be the hero the city needs? Or will the villains of Gotham overtake the Dark Knight once and for all?
So, which are the best budget electrics guitars available today? We've gathered a selection of the electric guitars that we reckon offer the best bang for the buck in the sub-$/£500 market. You may recognise some of the perennial budget classics (hello - again - to the trusty Yamaha Pacifica), but there's a raft of high-scoring options out there for the more adventurous.

The Fender Super-Champ X2 HD is a true champion when it comes to versatility and quality, combining old school tube technology with modern amp voicing and digital effects, all in a compact and portable 15W amplifier head. With a single 12AX7 preamp tube and two 6V6 power amp tubes, you can't lump this amp with conventional amp modelers, but you also can't group it with traditional tube amps because it does let you choose from 16 amp voicings that cover everything from clean Tweed tones to high-gain metal. In addition, the amp comes with 15 effects that include variations of reverb, tremolo, modulation and delay. With its low watt rating, the Super-Champ X2 HD is ideal for practice and recording, while being loud and portable enough for small venue gigs. Finally all these features are made available in a compact and more importantly - affordable package.

Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.
Electric guitars vary by type. Some are designed for beginners, while others are customized for professional guitar players. Most of the major electric guitar brands are available in a variety of different styles, each designed to best suit a customers' specific playing needs. The most popular electric guitars have great rock sounds and the best bodies. On electric guitars, strings affect the sounds too. Ease and sound are certainly big factors to consider when choosing a new electric guitar.

Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, Diecast, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Amber, Red
Despite the numerous different analog devices, it is very rare for them to be able to duplicate all aspects of a Leslie speaker. Thus, Rotary Speaker Simulator are always going to be digital, utilizing modelling algorithms to model the relations between the rotating horns and bass baffle. And how the sound bounce around the cabinet. As Leslie also have an amplifier section, most of these typically have overdrives to simulate that aspect. Some of these pedals can even accept keyboard's input.
Chorus is a great way to thicken up the sound of a bass (especially in a 3-piece band), rhythm guitar, or solo guitar. It is often used with distorted sounds but is a fantastic way to create full-sounding clean sounds as well. Stereo output (from two separate speakers) enhances chorus a great deal. Many acoustic guitar amps include a clean-sounding chorus effect adding depth and character to the amplified signal. Chorus pedals can be very helpful in fattening up the tone of acoustic-electric guitars whose piezo pickups tend to sound a little thin.

It should also be mentioned, that LX does not just stand for U.S. made. Originally LX was an indicator for an Ovation guitar that included several new features that were not available on previous guitar models. Back in 2007 Ovation explained on its website, that the new features included the new OP-Preamp, an advanced neck system (lightweight dual-action truss rod, carbon fibre stabilizers), a patented pick-up (made of 6 elements), inlaid epaulets, scalloped bracing as well as a new hard composite Lyrachord GS body.[25] Back then, no such thing as an AX model line existed (the first AX models appeared on the Ovation-website in 2010). Based on the website’s history the LX features must have been introduced in 2004.
The reverb driver amp consists of a phase inverting push-pull circuit made from dual sections of a 5532 high quality audio op-amp. This provides a voltage swing of approximate twice the supply voltage to the reverb impedance matching transformer, allowing higher power transfer. The 100 ohm resistor is critical for insuring a clean drive signal, without it, the op-amps can saturate when driving the transformer, producing unwanted distortion.
Compression is somewhat of a utilitarian effect, though I suppose some players see it as a key part of their sound. Essentially, compression is used to even out your sound. In recording situations this means helping instruments blend together by smoothing out the peaks and valleys inherent in the overall frequency spectrum. Louder sounds, like the crack of snare drum or a shout from a vocalist, become smoother, softer and woven into the overall mix.

In the entry-level market, brand-name guitar companies are usually forced to make their guitars with cheaper materials. There is a simple reason for this. Most major brand-name companies have a brand owner (sometimes an American company). That company buys from a factory in China, and in Australia they will have a distributor who will sell to a retailer (your local music store). It’s pretty easy to see why they can be forced to use cheaper materials. There is a lot of price pressure to get a guitar manufactured at a low enough price for everybody to take their cut of the profit down the chain.

Anyone who’s shopped for any kind of guitar recently knows that not only has the number of brands increased, the number of models offered by most major manufacturers has increased. Between Squier (Fender) and Epiphone alone, you’ll find about 20 different models under $200, and that’s not even counting the different color options. When you add newer brands (some of which seem to exist only on Amazon), you could easily end up with more than 50 different models—far too many to run past a testing panel because, as we learned from our ukulele tests, when you have more than about 10 instruments to test, it gets tough to sort them all out.
The one-string guitar is also known as the Unitar. Although rare, the one-string guitar is sometimes heard, particularly in Delta blues, where improvised folk instruments were popular in the 1930s and 1940s. Eddie "One String" Jones had some regional success.[citation needed] Mississippi blues musician Lonnie Pitchford played a similar, homemade instrument. In a more contemporary style, Little Willie Joe, the inventor of the Unitar, had a rhythm and blues instrumental hit in the 1950s with "Twitchy", recorded with the Rene Hall Orchestra.
I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.
In addition to guitars, Gibson offers consumer electronics through its subsidiaries Gibson Innovations (Philips brand), TEAC Corporation (TEAC and Esoteric brands), Onkyo Corporation (Onkyo and Pioneer brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems, pianos from their wholly owned subsidiary Baldwin Piano, and music software from Cakewalk. (See section #Instruments)
In 2007, Gibson announced the idea to create a computerized Les Paul, dubbed the “Robot Guitar” which was released on December 7, 2007. The guitar has a computer integrated into the body with a “master control” knob next to the volume knobs, which can be pulled out, turned, or pressed to issue different commands to the guitar. One of the more notable features is the ability to tune the guitar to standard tuning simply by pulling out on the master control knob and strumming the guitar, while the tuning pegs adjust themselves to standard tuning. Another use of the master control knob is to be able to tune the guitar to alternative tunings, such as drop D, by pressing on the control knob to fit the setting. The new Les Paul has a new custom silverburst blue finish.[30] While the product was advertised in the American popular press as a “world’s first”, similar systems, some external, have been in use for decades.
Fender instruments like the Stratocaster and Telecaster feature bolt-on necks and brighter tonewoods such as alder for the body and maple for the neck. They are easy to work on, and an owner with even a small degree of technical knowledge can fit replacement parts without professional assistance. Fender guitars are built to a 25.5-inch scale length, which lends to their brighter, more percussive tone. You’re more likely to see tremolo systems on this type of guitar, and hot-rodded guitars known as superstrats fall into this category.

5.  Customer installed strap button on heel of acoustic.  This was a simple job that went horribly wrong because a pilot hole wasn’t drilled.  Result:  Cracked heal.  Fix:  Careful application of cyanoacrylate glue and touch up refinish.  I’ve also seen strap button installations on guitars with bolt on necks where the pilot hole has hit the threaded insert in the heel.  Make sure you know where the insert is placed on that particular guitar before you drill.
Electric guitars are the easier to play as compared to acoustic guitars. But only because the chords are easy to play, that much force is not required to hold the chords as well as strum the chords. So it would better if you first practice the chords and the strumming on an acoustic guitar. The song Yellow by Coldplay, mentioned below, is considered as one of the best guitar tabs for beginners.

Hopefully, this guide has given you all the info you need in order to go out there and find the perfect guitar for yourself. We went into some aspects of electric guitars that will shape your decision the most. Beyond the ultimate considerations discussed between "this or that," the rest is a matter of preference that only develops after you've had time to gain that much experience. Until then, we hope you score the best electric guitar you can from above, as they'll carry you the distance until you've traversed the path long enough to start getting peculiar and picky.  Happy shredding!
I love this shop. I have spent a good amount of $$$ at quite a few guitar shops in Seattle. I won't name them, but I swear to god there's one that I walk into and every time I walk in I'm a new customer. No one remembers me there, I mean fuck, one dude is from the same city as me on the east coast. But the guitar store? They always remember me and treat me like a guest even if I'm not there to buy shit. Everyone there is a genuinely good dude. They're all honest too, which can be hard to find in this industry. I took my guitar in for a check up and they told me doing anything to it would be unnecessary. They could have easily charged me $80 for a set up and taken my guitar. They definitely made a loyal customer out of me. Will definitely be going there for anything from new picks to a new amp.

As the market for iOS devices and apps has grown, so has the availability of affordable stompboxes and processors that can store downloaded effects. Being able to sample, purchase, and download effects through an iOS app or digital download gives you access to a whole new palette of sounds. Though relatively new, in years to come this may well become the way in which most players will assemble their effects libraries.
Kaman and his technicians began by building traditional square-backed guitars, but by the sixth prototype were using oscilloscopes to develop the now familiar bowl-backed shape, its spherical shape being self-reinforcing, thus eliminating the need for bracing. After some experimentation, the carved, round-crowned Ovation three-and-three headstock was developed. The modern Ovation guitar with a Lyracord back was born.
Ibanez has always been a company that breaks new ground. For starters, they led the way for Japanese guitar makers to become a force to be reckoned with in music stores and stages all over the world. But, even more significant than that, they pioneered seven and eight-string guitars, laying the groundwork for others to follow in their footsteps and bringing these extended-range axes into the mainstream for the first time.  There's an Ibanez axe to cater to any player's sound. Rockers Steve Vai and Joe Satriani use Ibanez electric guitars, for example, and they can be heard in alternative metal with Mick Thompson of Slipknot as well as power metal from Dragonforce's Herman Li and Sam Totman. On the other end of the musical spectrum, there are the smooth jazz performances of George Benson and Pat Metheny. While their styles are as different as they come, the one thing that all of these artists have in common is that they each have their own signature model Ibanez guitar.
Here is s very nice 1976 Takamine F375s from the laswsuit era with the Headstock shape and logo style font replica of a Martin D-35 Exotic Brazilian rosewood guitar from 1962, An amazing likeness in looks obviously and she sounds sooooo sweet the 40+ years since she was built back in 1976 at the time of this build it has been said that Takamine had used aged woods of at least 20 years aging prior to its construction... this guitar has been extremely well cared for and it has barely a few scratches that will be sort of hard to find, the structural integrity of this guitar is excellent its neck set is excellent as is its action is low and as a result this guitar plays amazingly with no buzz smooth action and a pleasure to play. Frets have been lightly dressed and are nice too. Neck width is 1-11/16ths at the nut with a medium profile it feels like an old Martin to just perfect. It has been set up with a Martin bone nut & saddles set as well as new Martin 80/20 strings set she sings loud and sweet a pleasure to play with rich encouraging tone. This guitar is straight as can be with no cracks or separation on its body or neck with the only exception being its Solid Sitka Spruce top has 2 fine hairline cracks in the top and they do not go threw to the back side and are insignificant and have been properly sealed and buffed and you can not see them until the closest inspection, they are not progressing and have been stabilized professionally years ago. Other that the hairlines you cant see its near mint otherwise overall condition give this a very good to -excellent vintage used condition rating and a great choice fot the lover of these great exotic Brazilian Rosewood guitars, Japan does offer these Exotic Jacaranda Brazilian rosewood bodied guitars today but note they do not come with the OLD school Martin Headstocks or the old style Script logo they have the modern headstock Takamine design and logo oh ya a $4500-6000 price tag as well. You will find that this beautiful Rare guitar is a Bargain priced gem and should be played tonight as it is Ready to tour or Record tonight! .

The American Nashville B-Bender guitar is modeled after the personally customized instruments of some of Nashville’s top players, featuring a Fender/Parsons/Green B-Bender system, two American Tele single-coils (neck, bridge), a Texas Special Strat single-coil (middle) and five-way “Strat-O-Tele” pickup switching. Ideal for country bends and steel guitar glisses, this Tele is available only with a maple fingerboard.
Now I know the image above will give some people fits. Just the idea of doing a gig without your favorite amp roaring behind you is enough to send people to their sheds, grabbing pitchforks and lighting torches. This article is about why some guitarists choose to go direct at gigs. Going direct doesn’t replace the traditional guitar/pedals/amp formula that has powered popular music for over 60 years. Bass players and acoustic guitarists have gone direct for years, and technology is catching up to the ears of electric guitarists. Of course, no one is trying to tell every guitarist to do this, but it does seem to have merit in certain situations. Those situations are exactly what we will be talking about here. 
Brand new in ’64 was Teisco’s first double-cutaway, the Model EP-9, a small-bodied thinline hollowbody archtop. The EP-9 had a pair of pickups, mainly the oval kind with center poles. This had the old center-humped three-and-three head (no open-book dip), and the rectangular edge inlays. Controls were placed on the lower treble bout on a triangular plastic plate, with one volume and one tone, and two on/off rocker switches.
Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!

{ "thumbImageID": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Black-Rosewood-Fretboard/H76500000002001", "defaultDisplayName": "Fender Standard Stratocaster Left Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Rosewood Fretboard", "sku": "sku:site51310681124974", "price": "524.99", "regularPrice": "524.99", "msrpPrice": "525.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Stratocaster-Left-Handed-Electric-Guitar-Black-Rosewood-Fretboard-1310681124974.gc", "skuImageId": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Black-Rosewood-Fretboard/H76500000002001", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Brown Sunburst Rosewood Fretboard", "sku": "sku:site51310681124976", "price": "524.99", "regularPrice": "524.99", "msrpPrice": "525.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Stratocaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Rosewood-Fretboard-1310681124976.gc", "skuImageId": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Rosewood-Fretboard/H76500000004001", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Lake Placid Blue Rosewood Fretboard", "sku": "sku:site51310681124973", "price": "524.99", "regularPrice": "524.99", "msrpPrice": "525.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Stratocaster-Left-Handed-Electric-Guitar-Lake-Placid-Blue-Rosewood-Fretboard-1310681124973.gc", "skuImageId": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Lake-Placid-Blue-Rosewood-Fretboard/H76500000001001", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

This tonewood isn’t a very common wood used. But, when it is used on a solid-body guitar, you’re definitely going to have access to deeper, richer, and woodier tones. However, pair it with a Cedar top and you can have bright and warm overtones. Paired with a Spruce top, you can play to get an aggressive bite on the trebles with a definite presence on the low end.
Their selection these days is insane, especially since they target a lot of awesome smaller brands that NOBODY else in the area carries. I'm pretty sure this is the only place in town you can go to play the Reverend line, not to mention damn near every PRS model currently in production. The locally-made boutique stuff they stock is awesome too, and I would have never even known about it had it not been for the shop.
Over the years, the Gibson Memphis factory has become synonymous with creating some of the most accurate recreations of timeless classics. From the ES-335, ES-345 and ES-355 to the compact magic of the ES-339, the Gibson Memphis factory has built legendary instruments that pay tribute to the vintage masterpieces of yesteryear. To up the ante, the Gibson Memphis factory is now offering Limited Edition runs, showcasing the creative talents of their phenomenal crew, while boldly moving forward into a bright future. From unique models to exclusive colors, features and options, Gibson Memphis Limited Runs are redefining the concept of what makes a Gibson so unique, taking things a step further. With limited availability and an incredible demand for these unique instruments, Gibson Memphis Limited Runs have become highly collectible, sought after instruments with features us unique as the players who own them. Wildwood Guitars is honored to present our selection of these prized instruments to our exceptional customers. We invite you to find your own unique treasure among our inventory, just don’t blink… you might miss it!
• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.
Guitarists and bassists who want to extend what their instruments are capable of have a huge arsenal of effects pedals and processors they can turn to. From subtle to outrageous, guitar and bass effects pedals and multiprocessors help you capture inspiring sounds off recordings as well as spark your own creativity. Keep reading to get the details on the many types of guitar and bass effects you’ll find at Musician’s Friend. We’ll also get up close with some completely unique stompboxes.

Rickenbacker manufactures three distinct pickups for their current standard models: Hi-gain, Vintage Single Coil Toaster Top, and Humbucking. All three pickup designs share the same footprint, allowing them to retrofit into most current or vintage models. The tone varies from one style to the next, partially because of the types of magnets used[13] but also due to the amount of wire wound around the pickup’s bobbin.
Augustino Lo Prinzi Guitars - Augustine Lo Prinzi has made more than 10,000 guitars and just started his 49th year as a guitar maker! Renowned throughout the instrument making field, Augustino LoPrinzi's first instruments were classic guitars. As his career progressed he constructed many types of string instruments, numbering in the thousands : mandolins, lutes, violins, and steel string guitars, to list but a few. Now he is applying these years of wisdom to his first love, the classic guitar, which began his journey into instrument making.
Das Musikding is your online store for building guitar effect pedals, bass effect pedals , guitar amps, bass amps, synthesizer and many other musical related electronics projects. You can get pedal parts or complete kits, for all stages of building experience. Effects are great for guitar and Bass! Guitar effect kits available are Distortion, Booster, Fuzz, Overdrive, Delay, Tremolo, Compressor, Switches, Loopers and many other. We also feature kits and modules by and Molten Voltage Pedalsync. Amp kits are available by Madamp, great kits for a great price. Building guitar and bass effects made easy! You can get resistors, capacitors, potentiometer, knobs, jacks and plugs, aluminium and steel enclosure, transformer, wire and cable and many more things. Manufacturer are Wima, Alpha, Neutrik, Switchcraft and many more. Our shipping costs are low and the prices very good. If you need a special offer, just ask us!

According to Mr. Noguchi, Teisco instruments debuted in 1946 and were made by a company founded principally by the late Mr. Atswo Kaneko, a renowned Hawaiian and Spanish guitarist, and Mr. Doryu Matsuda, an electrical engineer. Mr. Doryu Matsuda was born in 1921 and was still alive at the time of this writing. As mentioned, Mr. Kaneko gave the guitars the Teisco brand name, however, the original name of the company was Aoi Onpa Kenkyujo (roughly translated: Hollyhock Soundwave or Electricity Laboratories). This was a small workshop formed in war-ravaged Tokyo.
Ibanez Mikro GIO Electric Guitar in Black w/ Bag. The guitar is in good working condition does have few marks and one nick. Does not include stand just used to take pictures. Includes guitar strap and Ibanez bag. Please contact me if you have any problems with your purchased item and I would be Happy work with you to help make your Transaction a Pleasant Experience.           Please check photos carefully and use the enlarging tool. Some photos are taken with a flash and may cause the image to appear darker in some areas. Photos are an important part of the description and the condition of each item.Thanks for Looking!!           Also please verify the correct shipping address before bidding. Payment is expected within 48 hours.    
Squier affinity series, looks and sounds great, Fender & Gibson had to start somewhere, so everyone wants to be a star & copy, but everybody's hands and minds are different, don't need to be a star or copy cat to make a name, if the guitar feels good and sounds good, so be it. Be the First, off-brand- (Star),,,,, take the cheap version to new and higher heights,
The Guild Starfire V Electric guitar is a deluxe cutaway with loads of outstanding features that gives a fully expressive voice to the user’s playing style and taste. Designed as a semi-hollow electric guitar, the Guild Starfire V features a beautiful thin line body with little twin Guild LB-1bucker pickups that make it suitable for rock, blues, roots and a lot of other variety of music styles.
Another acoustic guitar. This one sounds nice for fingerpicking arrangements and in general has a steadier sound than the Ibanez. If I had to choose just one of the guitars it would be this one. This one has a much rounder and fuller sound than the Ibanez. Both guitars go well together as they have different sounds to each other. This sound font also has the same presets as the one above.
Randall deserves to be up here in this list. Don't get me wrong, they've got a lot to contend with, in Orange and Mesa Boogie in particular, but Randall have always crafted excellent amps. Rugged build and vast tonal opportunities make this brand a mighty force, I mean they were good enough for Dimebag Darrell and countless others, enough said really...
While the general purpose is to emulate classic "warm-tube" sounds, distortion pedals such as the ones in this list can be distinguished from overdrive pedals in that the intent is to provide players with instant access to the sound of a high-gain Marshall amplifier such as the JCM800 pushed past the point of tonal breakup and into the range of tonal distortion known to electric guitarists as "saturated gain." Although most distortion devices use solid-state circuitry, some "tube distortion" pedals are designed with preamplifier vacuum tubes. In some cases, tube distortion pedals use power tubes or a preamp tube used as a power tube driving a built-in "dummy load." Distortion pedals designed specifically for bass guitar are also available. Some distortion pedals include:
Even with tone control maxed some high frequencies get cut. To let all the frequencies through you can either get a no-load pot or make one. CTS makes them for Fender and what they do is simply break the connection between the wiper and conductive element when pot is maxed. Additionally, they have an indentation so once they reach maximum setting they “click” and it’s not that easy to turn them back. To make your own just cut (or cover with nail polish) the element near the end, so that resistance between the wiper and the opposite lug reads infinite when maxed, at lower settings it should read as usual.

On the forum there are thousands of people at all stages of playing that can offer advice on new beginner guitars. I have to admit that I play pretty much only top-end gear and don't know the latest on all the new budget guitars, but on the community forum there are people learning that can all give you advice based on personal experience, and there's no substitute for that!
While some Supros were more or less re-branded Nationals, many represented totally unique designs in the Valco line. When the Supro equivalent to the National Grand Console was introduced in 1958, it featured a radically different body design. In place of the National’s conventional all-wood construction, the Supro 1475B Console Sixteen featured two wooden necks connected by three chromed metal rods that ran all the way through each neck. It’s not obvious why this design was chosen; it doesn’t have any advantages other than its unique aesthetics, and I don’t believe it could have made construction any cheaper. The Supro was cheaper than the National – $175 vs $235 – but the difference was likely due entirely to the more “exclusive” name on the National.
Silvertone starter pack is incredibly hard to beat. The candy blue finish gives the guitar a gorgeous aesthetic that looks fully professional. The pickup selector has 5 positions, and there are two tone knobs to give even more control over the sound. Stratocaster fans will love this guitar! Also included in the set is a gig bag, small Silvertone amp, strap, 5 picks, Allan wrenches, strings, a clip-on tuner, and a tremolo bar.
Ibanez LGB30 George Benson Electric Guitar   New from$1,099.99Only 2 Left!or 12 payments of $91.67 Free Ground Shipping ESP LTD KH602 Kirk Hammett Signature Electric Guitar   New from$899.00In Stockor 12 payments of $74.92 FREE 2-DAY SHIPPING PRS Paul Reed Smith SE Zach Myers Semi-Hollowbody Electric Guitar   New from$779.00In Stockor 12 payments of $64.92 FREE 2-DAY SHIPPING Epiphone Limited Edition Matt Heafy Les Paul Custom-7 Electric Guitar, 7-String   New from$949.00In Stockor 12 payments of $79.09 FREE 2-DAY SHIPPING See All Signature Model Electric Guitars
Go to the blues and jazz though and things change. Listen to the guitars. Warm, mellow, beefy, thick, with tons of butter. And those guitar sounds are mostly clean or overdriven (not distorted as with a distortion pedal). Using the neck pickup works well for this, but in addition to that, guitarists roll off the tone knob to cut more of the treble to warm up the tone and make it blend with the rest of the music. It also keeps the tone beefy and thick so the soloist can cut through the mix but without sounding as harsh like a rock player. Don’t get it wrong though, some blues and jazz tones will require trebley tones, but the guitarist will use the tone knob to change his tone instantly without having to change his amp settings for each movement or song, especially when improvisations and long instrumentals are involved.
Nice and great are just two of the many positive adjectives that people use to describe the Ibanez AEG12II-NT. And most of these satisfied users are pleased with its playability, describing it as a truly inspiring and fun instrument. Its visual appeal and sound quality are also commended often, some even coming from experienced players who compare it to more expensive acoustic-electric guitars.

The guitar is very light in weight and pretty resonant. At this point they were hard-wiring the cord right into the guitar with a nifty spring strain relief on the plug. This guitar has a brighter sound than my Gretsch and I probably prefer it for ultra-clean work because it has that vintage "thang" going on that some call "mojo." I am, however, trying to get the driven sound sorted at this point because of all the overtones. Now I know what sort of sound the Telecaster bridge pickup was based upon!
By the 1980s and 1990s, software effects became capable of replicating the analog effects used in the past. These new digital effects attempt to model the sound produced by analog effects and tube amps, with varying degrees of quality. There are many free guitar effects computer programs that can be downloaded from the Internet. Now, computers with sound cards can be used as digital guitar effects processors. Although digital and software effects offer many advantages, many guitarists still use analog effects.