Launch price: $1,499 / £1,211 | Type: Amp modeller/multi-effects pedal | Effects: 70 | Amp models: 41 guitar, 7 bass | Connections: Standard guitar input, standard aux input, XLR mic input, standard main outputs (L/mono, R), XLR main outputs (L/mono, R), standard stereo phones output, 4x standard send, 4x standard return, s/pdif digital in, s/pdif digital out, AES/EBU and L6 Link out, Variax, MIDI in, MIDI out/thru, USB, 2x expression pedal, Ext amp, CV | Power requirements: Mains power (IEC lead)
Before deciding on how to go about mic’ing the amp, listen to the sound in the room. If the guitar is being recorded as part of a rhythm track in the same room as drums and other instruments, the only option may be to use a close-mic’ing technique, unless you don’t mind dealing with the other instruments bleeding into the guitar track. Recording guitars in isolation, as an overdub, presents more options for ambient room mic’ing. Experiment with mic positioning to achieve the right amount of room sound and the desired bass and treble response. Distance-mic’ing in a very live-sounding room can create an appealing slapback echo-type sound, while close mic’ing gives you absolute flexibility in the mix.   
About the only thing that all these producers have tended to agree on across the board is that you should try to get your guitar sound as good as you can before you even think about recording. "The stupidest thing that any musician can do," remarks Tony Platt, "is to just plug in and play and say 'make that sound good'. It doesn't work like that. I will always say to the guitar player, for instance, 'Is that sound coming out of your amplifier the sound you want to hear? If it isn't, show me what it is and we'll try to get somewhere close to that before we even put a microphone on.' It's a waste of everybody's time to sit there tweaking stuff until somebody says 'Oh that's good.'"
“The tone thing is amazing because you can have one rig, have three different guitar players, and each guy can play the same exact thing and it’s going to sound different,” says L.A. Guns guitarist Stacey Blades. “It’s all in the hands.” Waara from Line 6 agrees. “Any guitar player will tell you, at the end of the day, it’s in your hands and you will sound like you will sound,” he says. The percentage of influence the hands wield is shockingly high.
For each slot requiring attention, I use a nut file at a slight downwards angle to widen the slot, making sure not to LOWER it (you should do this at a shallower angle than this photo might imply – you want to make sure that you are JUST slightly downwards compared to horizontal). Just take it really easily here, keeping an eye on the front of the slot to make sure you don’t go too far. Repeat this for whichever slots require widening.
In terms of precedent, one of the best known users of a parlour acoustic is Ian Anderson, frontman of eccentric British prog-rockers Jethro Tull. Here the smaller sized guitar enabled Mr Anderson to sling it off his shoulders, often mid song, to embark on a flute solo or child-scaring facial contortion marathon.  So, if that’s your goal, a parlour is the guitar for you.
Harmony was founded in 1892 in Chicago by Wilhelm J.F. Schultz. Sears acquired them in 1916. Harmony made guitars for others under many names, some of which they acquired from other companies due to bankruptcies. These include Oscar Schmidt, Stella and the Sears brand Silvertone. Harmony went out of business in 1985. A new company is currently selling guitars under the Harmony name – many of these are classic Harmony designs such as the Harmony Rocket electric guitar.
Steve Vai is without a doubt one of the most eminent musicians the world has ever known. In 1987, Vai teamed up with Ibanez to develop and design the JEM electric guitar, which incorporated a series of innovative designs. To make his guitar truly unique, Vai had a “handle” carved into the body of the guitar – something that has since become known as the “monkey grip.”
Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Natural, Sunburst

Almost every guitar you see on our website is available in our Chicago guitar showroom. While we carry hard-to-find, top of the line vintage guitars, Rock N Roll Vintage Guitar Shop also carries new guitars and basses from Fender (Squire), Martin, Seagull, Lakland, Hofner, Kay, Hanson, EGC, and other top brands. You can also find top of the line amps including Ampeg, Analog Outfitters, Divided By 13, Fender, Hi-Tone, Laney, Magnatone and Orange to name a few.
An awesome acoustic-electric guitar at affordable price! I felt like this is one of my smartest purchase. I have an OM one with very beautiful look - ivory-color spruce top and chocolate-color back and side. The guitar comes with built-in Fishman pick-up and tuner. It has bright and sweet sound on picking, while having strong and resonant sound on strumming. With capo, the tone can be transformed to be soft and deep suitable for sad songs. Most importantly, it is a full-sized guitar playable by a lady with small hand and short arm like me!

Third, the power ratings of guitar amps tend to be nebulous because the power is measured at a certain distortion threshold, yet most guitar amps are specifically designed to create distorted tones. Even with home audio gear, which isn’t designed to distort, it’s difficult to compare numbers across brands because each manufacturer comes up with their numbers in a different way. With guitar amps, it’s nearly impossible to make apples-to-apples comparisons of power ratings.

You will agree with us that the journey to the Canaan land of guitar mastery isn’t always one with bed of roses. Rather, it seem very daunting, especially with so many different types, styles, shapes and sizes in the marketplace—all craving for the bulging eyes of your wallet. But as with anything, the options before you can become clearer if only you can endeavour to filter out the unwanted options—that is, those that aren’t compatible with your immediate needs.

Harmony pedals are often used to generate vocal harmonies, but can also do wonders for bass and guitar sounds. Some vocal harmony processors use the signal from your guitar to create two- or three-part vocal harmonies. Most harmony effects let you specify precisely how much higher or lower you want the accompanying note to be. Modern artists such as Steve Vai and Robert Fripp have created interesting music using a purely pitch-shifted signal with none of the original signal mixed in.

Taylor’s proprietary pickup system, the Expression System, consists of ahumbucking induction pickup mounted in the neck and a pair of dynamic soundboard transducers wired to an on board preamplifier designed by Rupert Neve.[10] The entry-level 100 and 200 series use an externally similar system known as ES-T, which utilizes a single under-saddle pickup and no soundboard transducers. The first generation system was powered by a pair of AA batteries. Starting in 2007 the electronics use a 9-volt battery similarly to common piezoelectric and microphonic pickup systems in other guitars.

Both guitarists have been a large part of the Montgomery Gentry sound since the beginning. Garrett had been working the bars in Lexington, Kentucky and ended up becoming the first-call guitarist for singer Troy Gentry. When he and Eddie Montgomery teamed up to conquer the Nashville music scene, Bo was the natural pick for lead guitar. When the time came to expand their sound by adding a second guitarist to embrace their Southern Rock roots, bassist Andy Bowers recommended his brother Frank. Being the consummate professional that he is, Frank did his homework and nailed the material his first day out, earning him his spot on stage with the group for more than eleven years now.
Ultimately, you want to make the best purchase for the person who will be playing the guitar while staying within your budget. As we recommended in the beginning, it’s good to get an idea of what the player is looking for. Find out what styles they like, and his or her favorite music. Looks are important too! The right guitar in the right color could make all the difference.
In ’74, Ibanez, which was by then leading the copy pack, followed the suggestions of Jeff Hasselberger and changed its designs by squaring off the end of the fingerboard and lowering the neck into the body to look and play more like a Gibson original. Virtually all Japanese manufacturers followed. Since Univox guitars were primarily made by Aria, it is probable that in late ’74 or ’75, Univox guitars also had these features, although the Gimme shown in a 1976 flyer still has the rounded fingerboard, and this was in a 1980 binder, so you can’t be too rigid in evaluating Univox guitars based on these details.
WARTUNG Herzlichen Glückwunsch und vielen Dank dafür, dass Sie sich für ein Produkt von Ibanez entschieden haben. Ibanez legt bei seinen Produkten die höchsten Standards an. Alle Ibanez- Instrumente werden vor der Auslieferung unserer strengen Qualitätskontrolle unterzogen. In dieser Anleitung wollen wir beschreiben, wie Sie das Äußere Ihres Instruments pflegen und Ihre Gitarre in dem Zustand halten, wie sie bei Auslieferung ab Werk war.
Invented in 1931, the amplified electric guitar was adopted by jazz guitar players, who wanted to play single-note guitar solos in large big band ensembles. Early proponents of the electric guitar on record include Les Paul, Lonnie Johnson, Sister Rosetta Tharpe, T-Bone Walker, and Charlie Christian. During the 1950s and 1960s, the electric guitar became the most important instrument in popular music.[1] It has evolved into an instrument that is capable of a multitude of sounds and styles in genres ranging from pop and rock to country music, blues and jazz. It served as a major component in the development of electric blues, rock and roll, rock music, heavy metal music and many other genres of music.
With all of the guitarists gracing our list having been connected to the world of music for several years if not decades, we are quite confident that these successful musicians are in fact deeply rooted to the music, in spite of their obvious fame. Even if you are doing a job simply to please people and to make money, it can be hard to keep up the pretense for thirty odd years, with cameras following you around 24/7!
Kingston guitars (regardless of the model) are generally worth between $50 and $200 today, and your instrument falls within that range. There are some extremely clean examples of these for sale at around $250, but they’ve also been for sale for a while. Getting a complete player pack for $20 is a no-brainer, but don’t expect this to be anything more than, well, a beginner guitar. Also, don’t worry about decreasing the value by opening up the guitar to clean it or shimming the neck to try to correct the action. For something like this, it’s all about playability—not collectability.

Focus on the new chords you have learned and get physically used to changing between these and other chords you've learned in previous sessions. This is where you can use a metronome or backing drums to develop your rhythm and timing around these chord fingerings. Try and strum a simple sequence using these chords. Create a simple 3-4 chord song. This is about putting the theory you have learned into context.
Why We Liked It - The price on amazon is undoubtedly pretty high, which means that this Gibson is going to be for serious players and professionals only. You'll need to make sure you have gig bags or a guitar case in hand for protection! However, if you’re looking for the absolute best that the electric acoustic market has to offer right now, then there probably aren’t many contenders to the J-200’s crown.
I am 60 years old. I want a guitar (acoustic). I have decided on to retrain myself towards finger pickin style. I am researching knowledge and the tonal properties of the wood / tonal qualitites. I have very small (5.1). My hands are small. Neck demensions are very important towards please let me be trained so i can determine neck width and shape for my guitar
Seagull acoustic guitars are among the best values you are going find. They’re made in Canada, and there’s an attention to detail and craftsmanship here you may not expect in guitars at these price points. The Seagull Artist series is the top of the lineup. You’ll find unique tonewoods and high-quality construction techniques at an affordable price.

The body of an acoustic guitar is composed of the top, also called the soundboard. The soundboard is supported by internal bracing; the sides, and the back that together form a hollow chamber. The upper body curves are referred to as the upper bout, while the usually larger lower body curves are called the lower bout. The area between them is referred to as the waist.
So far I am very happy with this guitar. Right out of the box, it was set up perfectly, low action, no fret buzz, and it sounds great. (a sticker on it indicated it was inspected and set up in the usa) I have a feeling that once I swap the strings that came on it for elixirs it will be even better. The built in tuner is very handy, and consistent with the snark I typically use on other guitars. It sounds really good through an amp too, as the dual pickups and blend function create a very versatile range of tones one can achieve quickly. I am really impressed for the price, and I'm 100% sure this will not be my last Epiphone.
The woods used on the body and neck are worth considering too, although are unlikely to be a defining factor when you consider your purchase. Basswood features heavily as the body wood of many guitars in this price range because it’s affordable and has decent tonal properties. You will also find cheaper to produce woods like poplar and alder, although the traditionally more premium mahogany is also found on affordable guitars these days.
View a complete range of budget friendly electric guitars over at PMT Online today or call in to your local PMT store to see a full range. We have many electric guitars spanning all budgets, styles and genres including a complete range of guitar starter packs. Alternatively, call 0151 448 2089 to speak to one of our guitar experts to discuss your needs.

As with most chords in this list, a clear G major chord depends on curling your first finger so the open fourth string rings clearly. Strum all six strings. Sometimes, it makes sense to play a G major chord using your third finger on the sixth string, your second finger on the fifth string, and your fourth (pinky) finger on the first string. This fingering makes the move to a C major chord much easier.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"schecter","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

Tokai was founded in 1947 and is based in Hamamatsu, Japan. Tokai began production of acoustic guitars in 1965 and by 1968 was producing electric guitars for the American market. Tokai still exists as guitar manufacturer. Tokai made guitars for Fernandes, Mosrite and Fender Japan. Tokai badged guitars included the house brand Tokai as well as Cat's Eyes, Conrad, Drifter, Hondo, Love Rock, Mosrite, Sigma and Silver Star. Possible badges include Artist Ltd., Gaban, Gallan, Gession and Robin. It's suggested that Tokai made Hummingbird acoustics as well, but if these were related to those made by Humming Bird I haven't quite sorted out yet.
Australia’s best known guitarist, Tommy Emmanuel, owns many Matons and almost exclusively uses the BG808 acoustic model on his latest albums. Maton has even constructed a Tommy Emmanuel “TE series” according to Tommy’s specifications. His understudy Kieran Murphy also uses Matons. Joe Robinsonplays Maton guitars and was the company’s featured performer at the Frankfurt Musikmesse in 2009.[3]
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
Note that much of information and pictures are courtesy of Paul Bechtoldt and D. Tulloch's book, Guitars From Neptune", 1995. Much of this book is catalog reprints, but from it and American Guitars by T. Wheeler, I was able to construct this information. Personally I've never really actively looked for these guitars, so my knowledge base is somewhat limited. But a lot of people buy these at garage sales, flea markets, etc, and ask me about them. There doesn't seem to be a lot of information out there. This is probably because Danelectros and Silvertones are considered "low end" vintage guitars at best, and don't sell for a lot of money. So I hope this page will be of some help in their identification.
During the late Middle Ages, gitterns called "guitars" were in use, but their construction and tuning was different from modern guitars. The Guitarra Latina in Spain, had curved sides and a single hole. The Guitarra Morisca, which appears to have had Moorish influences, had an oval soundbox and many sound holes on its soundboard. By the 15th century, a four course double-string instrument called the vihuela de mano, that had tuning like the later modern guitar except on one string and similar construction, first appeared in Spain and spread to France and Italy. In the 16th century, a fifth double-string was added. During this time, composers wrote mostly in tablature notation. In the middle of the 16th century, influences from the vihuela and the renaissance guitar were combined and the baroque five string guitar appeared in Spain.[33] The baroque guitar quickly superseded the vihuela in popularity in Spain, France and Italy and Italian players and composers became prominent. In the late 18th century the six string guitar quickly became popular at the expense of the five string guitars. During the 19th century the Spanish luthier and player Antonio de Torres gave the modern classical guitar its definitive form, with a broadened body, increased waist curve, thinned belly, improved internal bracing.[34] The modern classical guitar replaced an older form for the accompaniment of song and dance called flamenco, and a modified version, known as the flamenco guitar, was created.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"performance level","prop11":"beginner","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}

Epiphone is to Gibson what Squier is to Fender. Meanwhile, the Les Paul is Gibson’s Stratocaster. Probably one of the most famous guitars on the planet, the Les Paul has been played by the likes of Slash, Jimmy Page, and Bob Marley. Epiphone, luckily, has made it available to the world with a price that won’t break the bank. And it’s an excellent guitar for those starting to play rock music.
Believe it or not, Eddie Van Halen hadn’t even heard rock music until he and his family moved from the Netherlands to Pasadena California in 1967. After hearing Cream, he quickly abandoned piano and drums for the guitar, learning the instrument by picking licks off records by Eric Clapton, Led Zeppelin, Jimi Hendrix and Jeff Beck. These influences were merely a springboard, though. Eddie was quickly able to put his own mark on everything he played.
While electric bass players have used regular guitar amplifiers in large concerts since the 1960s, this is usually just for the higher register; a bass amp is still typically used for the low register, because regular guitar amps are only designed to go down to about 80 Hz. One of the reasons bassists split their signal into a bass amp and an electric guitar amp is because this arrangement enables them to overdrive the higher-register sound from the electric guitar amp, while retaining the deep bass tone from the bass amp. Naturally-produced overdrive on bass obtained by cranking a tube amplifier or solid-state preamplifier typically results in a loss of bass tone, because when pushed into overdrive, a note goes to the upper octave second harmonic.
I was just old enough to catch the tail end, but many folks remember the days of the record store.  Large vinyl albums, huge artwork, leafing through the stacks….it was a cool time that lasted longer than the days of cassettes, 8-tracks, and CDs.  Nowadays, most music buying is relegated to the online variety.  But there was a time during the 1960s where record stores were THE place to get your music, and musical instruments!That’s right, in window displays or hanging above the stacks of vinyl, guitars like these were waiting for teenagers.  Again, just a cool time!  This Decca guitar was sold through Decca Record stores.  In early 1966, Decca Records jumped into the electric guitar frenzy.  This was around the same time when CBS has bought Fender and only a few years away from MCA buying Danelectro. Curiously enough, Decca Records was a subsidiary of MCA.Anyway, Decca and many other companies saw the potential profits of electric guitar sales and quickly tried to capitalize.  There was a whole line of guitars, amps, and accessories, all imported from Japan.  The entire instrument line was handled through Decca’s 21 branches and distributors throughout the USA, but the company seemed to concentrate on the east and west coasts.  There was also a Decca subsidiary in Canada as well.This particular guitar was made by Kawai, and featured a design that was semi-exclusive to Decca.  Kawai was producing and exporting thousands of guitar to the USA at this time, and Kawai’s prices were very competitive, but Decca decided to go with an (as of this writing) smaller, unknown Japanese company to produce the guitars.  Many of the Decca electrics featured non-adjustable truss rods and just seemed to always be on the “cheap” end.  But some of the them did sound very good.  Sometimes you’ll see some really odd Decca electrics that literally copied the Teisco look from the same time period.  There were also some cool hollow bodies with set neck designs as well as the late 60s  line of guitars, like the DMI 231 pictured below.

So to get the most from your book, it’s important that you respect the intent of the author in how you approach it. That doesn’t mean you have to work through parts of the book that are below your skill level, it just means that you should always work through the book in a linear fashion. If you need to skip to the middle of the book to find something that applies to you that’s fine, just work chapter by chapter (or exercise to exercise) from that point on. It will help you retain the information that you learn in the book if you work through it gradually as opposed to skipping through it.
Fretwire can vary from some makers as it is shaped by extrusion thru a series of roller dies and the dies wear.  I have observed actual Dunlop 6105 in my shop varying from .088” to .090” wide and from .052” to .055” tall.  Due to the inconsistent size and tang formation, I generally do not use Dunlop fretwire these days, instead preferring the more accurate German made Jescar or the Japanese made Stewart McDonald fretwires.  Both Jescar and SM have very well formed tangs and barbs and are very consistent. I will refer to the Dunlop numbers below but only for very general description – always verify actual sizes!

If it is muted in positions all up and down the neck, and you've already tried different strings, then I think you really need to be looking at the bridge. Is there any sort of slot cut in the saddle for that string? It could be that it is just the right width to kind of kill any sort of vibration from the string. Might be worth slackening the string, lifting the string out of the slot and setting it just a mm or two to the side and tuning it up again to see if that helps. If it does, then you'll need to do something about that saddle. You might be lucky enough to be able to swap it with another string, or maybe even turning it around might make enough of a difference. To be honest it's a hard one to troubleshoot, but if you want to contact me by email about it with some close-up photos, I'd be more than happy to try to help you figure out what the problem is. Email is
We saved the most affordable amplifier for the last. This Donner electric guitar amp might have only 10-watts, but it does not lack other features. The controls include Gain, boost Select Switch, Volume, Treble, Middle, Bass and are pretty intuitive. The tone is clean and damn big for such a small model. Other than that this model also has 3-Band EQ, 1/8″ Auxiliary Input Jack for Jam-Along with Media Player and, of course, the handy-dandy Headphone Output Jack for Silent Practice (unless you want to be evicted from your apartment for practicing days on end). Best practice amps are not best just because you can practice in your basement and never move the thing. They are pretty functional and easy to carry around. That’s why Donner put durable, hard material on the edges of the amp and a pad of rubber makes it more sturdy. With that your amp will be pretty much indestructible.
{ "thumbImageID": "Affinity-Series-Telecaster-Electric-Guitar-Arctic-White-Maple-Fretboard/510443000275063", "defaultDisplayName": "Squier Affinity Series Telecaster Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Arctic White Maple Fretboard", "sku": "sku:site51273888000751", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-Telecaster-Electric-Guitar-Arctic-White-Maple-Fretboard-1273888000751.gc", "skuImageId": "Affinity-Series-Telecaster-Electric-Guitar-Arctic-White-Maple-Fretboard/510443000275063", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "2-Color Sunburst", "sku": "sku:site51344269370579", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-Telecaster-Electric-Guitar-2-Color-Sunburst-1344269370579.gc", "skuImageId": "Affinity-Series-Telecaster-Electric-Guitar-2-Color-Sunburst/510443000002000", "brandName": "Squier", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black Maple Fretboard", "sku": "sku:site51273888000773", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-Telecaster-Electric-Guitar-Black-Maple-Fretboard-1273888000773.gc", "skuImageId": "Affinity-Series-Telecaster-Electric-Guitar-Black-Maple-Fretboard/510443000001063", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

The electric guitar setup routine is as important to your sound as any component on your instrument. In addition, if you learn how to setup your guitar correctly you can save some money by not running down to the local guitar shop, and paying them to do it. I want to preface that I am not an expert on the building of guitars. I did not go to the "Fender/Gibson school of Luthier excellence". I am however someone that's built a dozen electric guitars, and have setup everyone of them. Additionally I've setup probably fifty more guitars, including acoustics, for friends, and friends of friends, who found out I've got some practical experience in the matter.

If the gap is perfect, congratulations – you may now move on to step 2. If the gap is too large, then you need to tighten the truss rod a little (similarly, if the gap is too small, you need to loosen the truss rod). Locate the adjustable end of the truss rod. On every Les Paul style guitar I have seen, the adjustable end of the truss rod is located under the truss rod cover, located on the peg head. To remove this, simply unscrew the two (or three) screws and lift/slide the cover off.

Processors, on the other hand, comprise an entirely different water heating appliance filled with piscean vertebrates, as they tend not to need any of the dry sound, other than in a few specialist applications. As a rule, processors such as EQ and compression are connected only via track, bus or master insert points — at least until you have the necessary experience to understand why you might want to break the rules once in a while. Having got that off my chest, let's look at some specific effects (we'll look more closely at processors another time).
Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
The ’38 Supro line contained two lap steel models, still made of wood, but substantially different from the model seen in the ’38 Sorkin/’39 Grossman catalogs. The Supro Avalon Hawaiian Guitar had a rectangular body with rounded corners and two concave “cutaway” shoulders. The head had a slight curve to it. The fingerboard was made of polished aluminum, and the guitar was finished in gloss black. An enameled handrest covered the single pickup and strings passed into a slotted rectangular metal tailpiece. On either side of the fingerboard, just above the handrest, were two square plates embossed with the Supro logo and containing one control knob each, for volume and tone. Without case this cost $40. Note that this was the first appearance of tone controls on Supro brand guitars.

Great post a lot of useful information here I found this old acoustic guitar made by lotus I have never heard of this brand and have been trying to research it for about a month now and haven't gotten any closer to finding out the history of it if anyone know anything about them I'm all ears it has a tag on the inside model no. LW 65 or g5 lotus made in japan thanks in advance for any information I can get
You are bidding on a previously owned and in good working condition Blackstar Amplification HT Studio 20H guitar amp head. This auction is for the amp and power cable you see pictured. No footswitch is included. Nothing else is included. It comes as pictured. Please take a moment to look at the pictures and get a better idea of what you are bidding on. This unit has some scuffs and dings from being moved around. It has been tested and is in good working condition.
Note that much of information and pictures are courtesy of Paul Bechtoldt and D. Tulloch's book, Guitars From Neptune", 1995. Much of this book is catalog reprints, but from it and American Guitars by T. Wheeler, I was able to construct this information. Personally I've never really actively looked for these guitars, so my knowledge base is somewhat limited. But a lot of people buy these at garage sales, flea markets, etc, and ask me about them. There doesn't seem to be a lot of information out there. This is probably because Danelectros and Silvertones are considered "low end" vintage guitars at best, and don't sell for a lot of money. So I hope this page will be of some help in their identification.

Strandberg: Extremely unique and of great quality, the guitars made by Strandberg belong to a league of their own. They have extremely unique neck profile called EndurNeck to facilitate comfortable playing, the EGS tremolo is way more stable and easy to tune than other double locking trems. The guitars made by them are ergonomically designed to minimise fatigue among players. Their custom-shop specialises in making made-to measure guitars which are built specifically for each consumer so as to perfectly match his or her playing style. Their custom shop also provides option for Cycfi XR pickups whose sound can be programmed by editing their frequency curve.

2) The neck edges at the fret board are not rounded and tend to be rather sharp which can really start to hurt your hands if you play for awhile . Typically this is where guitar companies skimp on their budget models and Yamaha didn't disappoint. But it's an easy fix for a Luthier who will just take some sand paper and sand down the sharp edges and dress the end of the frets if needed. Also, its an easy fix for someone with a steady hand, good eye, and a women's fingernail file. It took me about 10 minutes to round the neck edges with a fingernail file and it didn't even require touch up paint thereafter as the fret board is solid wood and the same color all the way through. She feels like a dream now and I can play all day long without the sharp neck edge digging into my hand, and my hand just glides ever so smoothly up and down the neck as it should.

These bundles usually throw in a gig bag, so you don’t have to spend extra money to safely transport your gear, as well as spare picks, strings, and an instructable DVD that will help you learn some essential guitar techniques quite fast. You might also want a bundle that comes with a clip-on tuner so that you make sure you can keep your guitar well-tuned on the go.

Taming loud guitar playing isn’t the only reason to grab a mini amp, though. These also come in handy when traveling. Sure, you could bring along your acoustic guitar, but that will still make a fair amount of noise in your hotel room, and playing more quietly is less fun. With a mini amp, you can strum as hard as you want to and still control the volume. Many are also small enough to fit inside carry-ons without reducing the space you need for food, a travel pillow, and a good book.

B.C. Rich manufactured a ten-string six-course electric guitar, the Bich, whose radical shape positioned the machine heads for the four secondary strings onto the body, avoiding the head-heaviness of many electric twelve-string guitars. However, many players bought it for the body shape or electrics and simply removed the extra strings. The company recognized this and released six-string models of the Bich, a shape now generally incorporated into their standard Warlock.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
I am a lawn tennis and guitar playing trainer. I am a college lawn tennis varsity player and became a coach and a trainer of beginners and advance tennis players. I am also a band player and singer performing musical folk, pop, ballad and jazz pub Shakey's Pizza Parlor and chains. I worked with Yamaha Music Corporation as an account representative.
We as a team are always extremely inquisitive and wondered about something, which can be anything, happening around us. One day we planned to share these things which are enough to spice up soul of internet freaks and we made Here on, we pick, research and display some really cool examples which hit us somewhere in our daily lives. The website let the visitors to explore chunk of daily stuff they may need to know about. You will get a bunch of trending information from around the globe. Every latest buzz, from footpath to limelight, we have it all, in Article, Charticle And Listicle way with the categories- Taza Khabar, Hottest In Cinema, Top Tenz, Education, Jobs & Career, Tech In Trend, Sports. So, if you’re a viralmaniac, quench your thirst here!
{ "thumbImageID": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco/L26865000001000", "defaultDisplayName": "Ernie Ball Music Man StingRay5 Special H Rosewood Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "HD Yellow", "sku": "sku:site51500000222156", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-HD-Yellow-1500000222156.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-HD-Yellow/L26865000005000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Tobacco", "sku": "sku:site51500000221730", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco-1500000221730.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco/L26865000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Classic Natural", "sku": "sku:site51500000221728", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Classic-Natural-1500000221728.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Classic-Natural/L26865000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ivory White", "sku": "sku:site51500000221731", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Ivory-White-1500000221731.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Ivory-White/L26865000004000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Chopper Blue", "sku": "sku:site51500000221729", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Chopper-Blue-1500000221729.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Chopper-Blue/L26865000003000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The truth is that you can play any genre of music with just about any type of electric guitar. Many blues players run Gibson Les Pauls with beefy humbuckers, while Iron Maiden completely broke the stereotype that you can't play metal with a Stratocaster.  Guitar effects pedals really changed the game too. However, some guitars do actually deal better with certain music genres.
A great debate has raged hot and heavy throughout the guitar playing world since George Beauchamp and Rickenbacker invented the electric guitar. It's a debate that's ignited feuds, torn apart families and has surely broken some hearts and continues to this day. What debate drawn from the innocent depths of guitardom could illicit such a foul and unexpected response?
Acoustic has never had much of a following amongst guitar players, but they made (original company out of business) some of the best bass amps that were ever made. Advanced solid state construction and creative speaker design finally gave bass players something besides Fenders lame sound and Ampegs wall of mud. To top it all, they are durable, ask my 30+ year old 360. Mosrite and Gibson basses and Acoustic amplifiers, life just doesn't get better.

So to get the most from your book, it’s important that you respect the intent of the author in how you approach it. That doesn’t mean you have to work through parts of the book that are below your skill level, it just means that you should always work through the book in a linear fashion. If you need to skip to the middle of the book to find something that applies to you that’s fine, just work chapter by chapter (or exercise to exercise) from that point on. It will help you retain the information that you learn in the book if you work through it gradually as opposed to skipping through it.
This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.
The Blackheart Killer Ant is another slightly unconventional choice. Features wise, the Killer Ant does not have even the basics found on most beginner amps, yet it costs more money. The only controls on the Killer Ant are a power switch and a volume control. However, what sets the Blackheart Killer Ant apart is the fact it is a tube amp, rather than the cheaper solid state amps used for most beginner amps.
The first Touch Guitar Invention started in 1959 with the filing of patent #2,989,884 issued in 1961 as the first touch tapping instrument which could be played on two separated necks Simultaneously by muting the strings at the distal end of the neck along with numerous other claims. Until 1974 it was known as the DuoLectar and with a new patent "the "Electronic Mute" has been known as the "Touch Guitar. It is held in the normal way over the shoulder and design with the left hand playing the lower bass neck in a traditional way and the right hand playing over the top on a neck which has a wider string spacing allowing the hand to be used in both vertical and horizontal angels to the strings. It is absolutely off at all times, until Touched or picked.

Many pedal builders will order their resistors, capacitors, IC, and other components in bulk online. Most of the time, this is a much cheaper method than buying single components – plus it gives you an enormous variety of components to use. It may also be wise to check out the circuit boards inside of any old electronics, or broken guitar pedals you no longer use. You’d be surprised what you may find.
With JH’s encouragement, I’ve made the decision to produce my own line of premium acoustic guitars, handbuilt as before, to the same high quality, and with an extended option list including other rare woods, finishes, and trim options. The brand I will be using is “Madeleine”, in honor of my late granddaughter who passed away May 2, 2011 at age 1 month.
To answer this question, all you need to do is close your eyes and focus on what is currently going on around you. Just about every sound you hear, whether you are at home or on a busy street, is packed with some dose of reverb. In nature, sound reflects off of multiple objects and surfaces across various distances. Both our ears and our brains are used to reverb by default. That is one of the reasons why even an artificial reverb effect tends to make a track more enjoyable.
Could be a couple of things. Either it's hitting off a high fret, or more likely the saddle is killing the string's vibration (that can be caused by the string sitting in a slot that does not have a sudden enough drop-off, for example). Try slackening the string and lifting it to the side slightly on the saddle (like 1 or 2 mm), then tune it up again. If that sorts out your problem, at least you've identified the cause.
{ "thumbImageID": "Les-Paul-SL-Electric-Guitar-Turquoise/K35586000004000", "defaultDisplayName": "Epiphone Les Paul SL Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Turquoise", "sku": "sku:site51500000137036", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Turquoise-1500000137036.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Turquoise/K35586000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural Yellow Sun", "sku": "sku:site51500000137032", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Natural-Yellow-Sun-1500000137032.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Natural-Yellow-Sun/K35586000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

There are a huge number of different style tone controls in musical equipment; this hardly scratches the surface. If you’re interested in what your tone controls do to your sound, agood place to look is at Duncan’s Amp Pages, where there is a tone stack calculator that shows frequency graphs of several different types of tone controls. Check out for more info.

I use an EBTECH HUM X. I plug my Fender ’62 Re-Issue Deluxe Reverb into the HUM X and then I plug the HUM X into the wall socket. It works great for me. For my pedals, I use a Visual Sound One Spot to power my large board with no issues and I have a Boss BCB-3 pedal board/case with OD-3, CH-1, DD-3, and a TU-2 next to the OD-3 on the floor since my BCB-3 is really old it came with a 4 pin daisy chain. I power that with a Boss PSA-120S AC Adapter also with no issues. I read about keeping your signal as clean as possible and cable lengths no longer than is necessary. I would try everything mentioned above and make sure you have good quality and proper length cables. BTW, if you research cables, you may find that more expensive doesn’t always mean better. Check out Pro-Co. They are also made in the USA. Good luck!
Telecaster is the original solid body guitar. Ever since this iconic model has only grown in popularity. This Tele we look it at here is a bit different. It comes packing an H/S/S pickup configuration, which you don’t see that often on these guitars. With that said, it feels and sounds awesome. I had it setup with a vintage Marshall Plexi and the sound was just impressive. There’s definitely more tonal range than you get in a standard Telecaster.
Perhaps not as famous as its brother, the EMG 81, this awesome EMG 85 still rocks and makes a worthy appearance in our chart. Perfect for the neck position (although equally solid in the bridge), the EMG 85 features Alnico V magnet-loaded close aperture coils to deliver a natural tone with a huge output, with no loss of clarity as the volume is pushed to its highest.

I think it's OK to find out what the knobs are supposed to do, so you know roughly what to expect, but I would thoroughly recommend just sitting for half an hour and playing around with all of them, just seeing what sounds you can get. You'd be amazed what tonal variety you can get from moving the volume knob before you go anywhere near the tone knobs.
There is clearly a great deal that the guitarist can do for the sound by changing guitars, strings and amps, but from the perspective of the recording engineer it's also important to think about how the guitar cab is interacting with the room it's in. For example, Roy Thomas Baker mentions that he sometimes sets up the same guitar cab in different rooms because of the effect on the sound. Even if you're restricted to one room, a number of producers suggest trying out different positions of the amp in the room. Tony Visconti: "It's not so much that you're miking a guitar — you're miking a guitar in a room. I had a cellist in here recently, and I moved her until I got a good sound. Once I put her in one particular corner, her cello just sang — the room just filled up with the low end, and the sound exploded! A person who hasn't had years of experience might not have thought of doing that, but I could tell there was something lacking when she was in the centre of the room. That's mic technique. It's not so much the instrument; the room is very much part of the sound."
There were marked differences between the other Les Paul models and the Les Paul Junior. For instance, although the Junior’s body outline was clearly reminiscent of the original upmarket Les Paul guitar, the Junior issue was characterized by its flat-top “slab” mahogany body, finished in traditional Gibson Sunburst. The Junior was touted as an inexpensive option for Gibson electric guitar buyers[citation needed]: it had a single P-90 pickup, simple volume and tone controls, and the unbound rosewood fingerboard bore plain dot-shape position markers. However, as a concession to the aspirations of the beginning guitarist buyer, the Junior did feature the stud bridge/tailpiece similar to the second incarnation of the upscale Gold-Top.
@Ricardo – I recommend placing tuners as close to your original signal as possible at the beginning of your signal chain. An EQ pedal can be placed where you would like to filter your signal to the settings of the EQ which is technically at any point in your signal chain. Try the EQ in different locations and use the setting that works best for your.
Likewise, six Folk/Country Western guitars were offered, with flat, corner-notched heads, belly pin bridges and tortoise pickguards. The 14″ GS240 Concert ($79.50) was a Spanish shape with natural spruce top, mahogany body, and dot inlays, presumably on a rosewood fingerboard. The 15″ GS350 Grand Concert ($99.50) was another Spanish with natural spruce and figured Brazilian fruitwood body, with diamond inlays and wood rope binding. The GS380 Grand Concert ($109.50) was the same as the GS350 except for a Brazilian rosewood body. The GS460 Country Western ($129.50) was a 16″ dreadnought with a spruce top in red sunburst, cherry-finished mahogany body, a black pickguard, sort of mustache bridge, diamond inlays and white binding. The 16″ GS570 Auditorium ($149.50) was another dreadnought with yellow spruce and full grained Brazilian rosewood body, diamond inlays and fancier rosette. The GS680 12-String Auditorium ($185) was another 16″ dreadnought 12-string otherwise the same as the GS570.
Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]

If the Complete Technique book is good for quick starts, this would be the bullet train. Another Hal Leonard selection, this is a trim 48 pages for teaching you how to hold a guitar for the first time. Tuning up, easy chords, and strumming. If you got a guitar on Friday, use this to put together your first three-chord jam by Monday. Will it sound good? No, no, it will not. But you’ll have started, which is key. Some of the other books on this list are dense with both concepts and pages, which might delay your starting. Don’t let that happen.
Besides the recognizable brand, there’s the sound quality, that earned it good appreciation even from experienced guitarists who are used to more expensive units. It has a standard 12” speaker that allows it to render treble and bass equally well, for a good range of sound which should make it suitable for country, blues, and jazz, as well as softer rock.
There was a lot of tinkering with the Spanish-style electric guitar in the 1930s and 1940s since the electronics in a hollow-body instrument caused distortion, overtone, and feedback—especially problematic for recording sessions. Historians and guitar enthusiasts enjoy debating over who really developed the first solid-body Spanish-style guitar to resolve these sound issues. The National Museum of American History owns a rare Slingerland Songster made in or before 1939. This model is possibly the earliest commercially marketed solid-body Spanish-style electric guitar.
Two solidstate Tempo beginner amps were offered in ’71. These had black tolex covers, front-mounted controls and a rectangular logo with block letters on the grille. The Tempo No. 158 ($65) had an 8″ speaker, 10 watts of power, tremolo with speed control, reverb with depth control, three inputs, volume, tone and a black grillcloth surrounded by white beading. The Tempo No. 136 ($31.50) offered a 6″ speaker, six watts, three inputs, volume and tone. The grillcloth was dark (probably black) with horizontal flecks.
Alnico magnets in a humbucker pickup should make you think vintage tone, with said pickups generally lower in output in comparison to their ceramic counterparts. But having proved capable, and indeed at home with rock and metal, it's great to learn that rolling off the gain emphatically proves that the XM-DLX2 is no one-trick pony; the neck pickup easily handles fat, rounded jazz/blues tones with the bridge pickup fluent in Skynyrd-esque raunchy pickin' country.

Quite often, power chords are played with only down-strums, and often with a technique called palm muting, which might make it less vital to mute the unused strings. But it is REALLY important to mute them because many songs do use up- and down-strums with power chords (‘Smells Like Teen Spirit' springs to mind). Also, if you don't mute them, and you play loud with distortion, the strings might ring out—even if you don't pick them—and which will make your chords sound messy. So make sure you get your string muting sorted now!

What? I have an early 90s pe and I've recorded with it and its one of the best guitars I've ever played. Beutifull clean lp tone and ballsy as when you dirty it up. I also have a pro 2 fullarton which with the fender lace sensor pups I put in it, plays and sounds as good as any strat I've played in thirty years. Check the new arias comming out of the states at the moment and they are really awesome looking guitars. There is also a reason the early ones are known as lawsuit guitars as Gibson though they were so good they had to sue them!
Guitar signals cutting out is a very common symptom of a simply wiring problem. Usually when your guitar cuts out, it means that you have a loose solder somewhere. Your guitar will sound fine when the solder connection is joined, but your guitar will cut out when the loose wire disconnects for the lug. Broken solder joints are common on electric guitars especially when your output jack becomes loose and rotates in the pocket. That is why it is extremely important to keep your output jack tight and secure at all times. If your output jack is loose and rotates, it will probably break the wiring connections inside the guitar. Luckly, loose connections are easy to fix. The only problem is trying to find them.
If you have an envelope follower, envelope filter, auto-wah or other dynamic touch-sensitive effect, this should go at the very front in most cases, as these effects are almost exclusively dependent upon the dynamics of your playing. Placing most other types of effects in front of them will compress the signal, thereby reducing dynamics and minimizing their performance.
Barely used in my home, NUX Cerberus multi pedal. Not a modeler, it has true bypass distortion, overdrive, modulations(chorus,flange, phase, univibe and trem) as well as delay and reverb- all completely programmable and can be used as a pedal board or as presets. Built in tuner and cab simulator- great multi pedal can be used as a fly rig or in front of an amp- Comes in the original packaging with power supply. US buyers ONLY- I will not ship internationally- No returns accepted
I moved permanently to Brazil from the USA. I brought an acoustic in a typical acoustic case. I had a vintage VOX v241 Bulldog in it’s original wood case. They both survived the counter check-in and belly load of the airplanes and transfers. My VOX Pathfinder amp was in a footlocker with other thing and made it just fine also. Yes, the plugs and voltage differences are a problem. I need to use a voltage transformer to change the 220v to 110v. I wouldn’t worry too much about shipping a Fender style guitar but any guitar with with a Gibson style neck I would worry about and want the best specialty travel guitar case I could find.
The output jack is where you plug in your guitar lead. These are generally 1/4″ and transfer the signal created by your pickups to your guitar amp. They are usually connected from a ground wire and input wire. When the lead is plugged into the output jack the signal can be transferred. These can often be a source of trouble and need to be kept tight to reduce noise.
The early rock bands of the 1960s used the PA system only for vocals. The electric guitarist and electric bassist had to produce their sound for the hall, club or other venue with their own amplifiers and speaker cabinets. As a result, bass players from the 1960s often used large, powerful amplifiers and large speaker cabinets. Some bass players would even use multiple bass amplifiers, with the signal from one bass amp being sent to one or more "slave" amps. In the mid-1960s John Entwistle, the bassist for The Who, was one of the first major players to make use of Marshall stacks. At a time when most bands used 50 to 100-watt amplifiers with single cabinets, Entwistle used twin stacks with new experimental prototype 200-watt amplifiers. This, in turn, also had a strong influence on the band's contemporaries at the time, with Jack Bruce of Cream and Noel Redding of the Jimi Hendrix Experience both following suit.

The full-size electric guitars we tested are the Epiphone Les Paul SL, Ibanez GRGA120 Gio, Indio 66 Classic, Indio Retro DLX Quilted Maple, Jackson JS11 Dinky, Squier by Fender Affinity Series Jazzmaster, Squier by Fender HSS Bullet Strat, and Yamaha Pacifica PAC012. The short-scale guitars we tested are the Epiphone Les Paul Express, Ibanez GRGM21 Mikro, Jackson Dinky Minion JS1X, Jackson Rhoads Minion JS1X, and Squier by Fender Mini Strat.
yea, i’ve looked on a lot of websites. The way the 5-way switch is explained here helps a lot. Actually, the Dimarzio site has the closest wiring schematic that I’ve seen. I tried it and I got 2 out of the 5 positions to work. The problem is that all 3 pickups are running on both the working settings, just the bridge is more defined on the one setting and the neck is more defined on the other.
This guitar is truly a practice friendly instrument, with its smaller body and shorter scale length of 21.25", this acoustic is definitely easy on the hands. The neck profile is specially beginner friendly, great for first timers who are looking to learn the instrument. The parlor style body makes it easy to handle and carry around, ideal for young players and students of the instrument who travel. The downside to having this smaller body design is the lack of low-end, but it does make up with articulation and comfort.
Amps available in ’61 included the large HG-8 (recommended for use with the EG-TW and Harp Guitar), the Amp-75C, Amp-73C, Amp-72A, Amp-72B, Amp-72C, Amp-71A, Amp-71B, Amp-71C, Amp-30, Amp-4C, Amp-15 and Amp-86 bass amp. These came in a varity of shapes, mostly with either a single color covering with a tweed grillcloth, or the two-tone Amp-30 or the two-tone Amp-15 with a cross-shaped grillcloth area. All had the Swan-S logo. These were most likely still all tube amps at this point in time.
I have been a musician for many years now. I have played in everything from metal bands to acoustic coffee house sets to worship/praise bands. I feel that with these many years of playing I have earned a sharp ear, no pun intended. By that I mean that I have developed an ear not only to hear pitches, tones, and notes, but I can also hear good and bad timbre. I feel that Taylor guitars simply produce the best timbre of any acoustic guitar I have played. Naturally, all of my acoustics are Taylor! With that, thanks to Bob Taylor for doing it best and doing it right the first time!
Bottom Line: The Line 6 HD500X is incredibly in-depth in the amount of options and editability it gives you. Doing all of it from the small screen on the actual unit is headache-inducing, but if you have a computer you can hook it up via USB and edit your sounds from there much more easily. There’s more of a learning curve with the HD500X than there is with the Zoom G3X, but the presets are decent enough and allow you to audition it if you’re the impatient type. Where the HD500X lacks is that it’s less of an immediate-gratification pedal, and it’s hard to tweak on-the-fly and come up with potentially inspirational sounds. Because of how the interface is, this is definitely more of a “sit down with headphones and tinker with it to get your perfect sound” type unit. If the effects quality of the Zoom G3X is a 7/10, the Line 6 HD500X is an 8.5/10. This is the one to get if you’re the type that likes to dig in and have control over every little thing. The price tag is a little on the high side, but considering what a powerhouse this unit is, it’s definitely not unreasonable.
The Marshall MG series are also strong contenders, a lot of players use them and they’re ideal for the kind of music you like. You see them in a lot of studios. Not a tube amp and all that, but perfectly serviceable and they have some onboard effects, which can be fun. I used a mic’d MG50 when I played in Kenny’s Castaways for a year or so in the house band, and people said I sounded great. Amp cost me $280 on sale I think. I found the sound of the MG superior to the Line6, but not so much that I’d pay a lot more money for it. If I had a gig where I needed options and didn’t already own the effects I needed, I’d have no problem using the Line6.
Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
This is the point where the neck meets the body. In the traditional Spanish neck joint the neck and block are one piece with the sides inserted into slots cut in the block. Other necks are built separately and joined to the body either with a dovetail joint, mortise or flush joint. These joints are usually glued and can be reinforced with mechanical fasteners. Recently many manufacturers use bolt on fasteners. Bolt on neck joints were once associated only with less expensive instruments but now some top manufacturers and hand builders are using variations of this method. Some people believed that the Spanish style one piece neck/block and glued dovetail necks have better sustain, but testing has failed to confirm this. While most traditional Spanish style builders use the one piece neck/heel block, Fleta, a prominent Spanish builder, used a dovetail joint due to the influence of his early training in violin making. One reason for the introduction of the mechanical joints was to make it easier to repair necks. This is more of a problem with steel string guitars than with nylon strings, which have about half the string tension. This is why nylon string guitars often don't include a truss rod either.
: I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...

Far as commercial recordings go, the oldest recording seems to be by the Hawaiian group Noelani Hawaiian Orchestra in 1933, which did four songs featuring the electric lap steel recorded on Victor records. However, the guitarist is unknown. Bob Dunn recorded electric lap steel in 1935, as part of the country swing group Milton Brown and His Musical Brownies. George Barnes recorded "Sweetheart Land" and "It's a Low-Down Dirty Shame" with Big Bill Broonzy in early 1938, followed a couple weeks later by  Eddie Durham with the Kansas City Five. Barnes played conventional guitar, not lap steel, so that's the first recording of a "conventional" electric guitar performance.
Most users and experts agree that the Zoom MultiStomp MS-50G is a high quality and high value pedal. But it's not just about bang per buck, because many are satisfied with the quality of its effect and amp emulations. Even Music Radar is convinced of its performance saying, "While not all of the sounds are going to appeal to all players, there are enough usable tones here to make this a very practical item for just about anybody who uses effects."
Great Gretsch "pumpkin orange color", and a great sounding, and playing import reissue. Knobs replaced with dice, and a couple of decals added. Has factory installed Epiphone labeled Bigsby trem-tail piece, no longer available on this model. Chrome p-90 pick-ups. Guitar, and original hard-shell case in like new cond. New list on these is $1195.00 with original hard shell  case.
2.      Weight – a LOT less. This is important if you’re leaving the garage for the first time and don’t have roadies, if (like me) you’re trying to not injure your back anymore lugging equipment), if you’re a touring band trying to spend less on cartage and more on crew, or if you’re a worldwide act who needs to truck and fly your stage rig between continents.
One of the earliest studio effects created by taking advantage the distance between the record and playback heads on tape recorders, delay duplicates the original signal and repeats it after the original sound is played. This can be repeated over and over for an echo effect, or be a single repeat that produces the slap-back sound popular in rockabilly. The time between repetitions can be very short, measured in milliseconds. Or it can be longer and more dramatic. Delays can also add a rhythmic element to your playing. There are many different kinds of delay effects available, and most offer a number of different types in the same unit.

The prototype was introduced at the 2011 NAMM exhibition. Bolan is seen holding the instrument on the outer gatefold jacket of T. Rex, his first album after shortening the band name from “Tyrannosaurus Rex”. The guitar was stolen from Bolan in London, and for the last months of his career he was using a wine-red 1970s Les Paul Standard. Gibson announced the availability of the Marc Bolan signature Les Paul in February 2011.
I'll be honest .. my Washburn N4 is hands down the best I've ever known. To me, Les Pauls sound amazing but are heavy and play like a log cabin. A buddy of mine's Suhr Strat felt/sounded clinical and small. An old Gibson SG felt like a cigar box jobbie. I remember in the early 90s looking at the Vai Ibanezes and the body was great despite the zany colors but the neck was too thin and whispy. I had the frets leveled and crowned and the action on mine 10 years ago and it just plays and feels like butter .. maybe 2 - 2.5mm at the 12th fret. The neck I sanded with 2000 grit now slighty reflects light so it glides beautifully feeling like 'satin wooden glass'. My aftermarket pickups puts the tone squarely into a modern fusion rock camp of sorts .. Oh yea and I think it's the neck shape of these Davies N4s that might make them so cool. The nut is a wider, more comfortable 1 11/16 inches with a flat fingerboard radius .. so may of the others seem like 1 9/16 with a cramped, rounder fringerboard. I did try a JP6 I didn't care for the feel of .. tl;dr ymmv :)
Across the United States, there are increasing concerns from businesses about the supply of science, technology, engineering, and mathematics trained workers. Although science and math test scores in the US are among the lowest around the world, the US educational system is in the process of revitalizing the “hands on” learning techniques as a way to enhance the participation and success of students. Our project meets the needs of applied learning with the flexibility of being modular in the classroom.
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
#5? Are you joking? I have a PR-200 that I've owned for 15 years. I hate it. The action is ridiculous unless your fingertips are made out of adamantium or whatever the heck Wolverine is made from. The sound is muddled and a clash of midrange. Sustain is nonexistent. The frets have flattened on the high strings. News flash- I'm not spending $350 to re-fret a $279 guitar. Epiphone may make some good high end guitars but I don't trust them. If you make crappy low end guitars why should I trust your brand? You were supposed to get me to fall in love with the brand but you've made me hate it. My next guitar will be a Yamaha, Martin or Taylor.
Admit it. You’ve slow danced to Stairway To Heaven before. Page’s playing have influenced so many guitar players of today, and Led Zeppelin revolutionized Rock and Roll blending acoustic guitars, banjos, and mandolins while still staying with the same gritty rock image. His guitar riffs are forever etched into Rock and Roll’s hall of fame. How influential was he? Step into a guitar store, and you’ll see. Thousands of 12 year old kids across the globe are playing the intro to Stairway. Now that’s how you know you’ve made it.
Whether your style is searing rock or acoustic folk, the right guitar will help you sound and feel like a superstar. From acoustic guitars to electric hybrids to bass guitars, there’s a guitar designed exactly for the way you play. You’ll be rocking out in no time when you choose a guitar from Best Buy’s selection of top brands like Fender, Yamaha, Squier, Schecter, Mahalo, Dean Guitars and more.

Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011. Retrieved 9 October 2012.
Joan Armatrading, Roy Clark, Jim Croce, Kevin Cronin, Neil Diamond, Al Di Meola, Robert Fripp, Mick Jagger, Greg Lake, Adrian Legg, Paul McCartney, Brian May, Freddie Mercury, Jim Messina, Steve Morse, Eddie Rabbitt, Kenny Rogers, Richie Sambora, Tom Scholz, Seal, Bob Seger, Paul Simon, Rick Springfield, Eddie Van Halen, Josh White, and Nancy Wilson;[32]

Beautiful Teisco Electric Guitar refinished in sea foam green or Daphne blue color, it has a custom series parallel pickups toggle switch, nice low action, sweet sound, plenty of tonal possibilities. Buy with Confidence....... Blessings! Item will be well packed, shipped and insured to any of the 48 contiguous States, No Alaska, No Puerto Rico, No Hawaii, No International buyers.
You have to admire a YouTube channel and accompanying website that’s taken one guy on his own over fifteen years to build and offers hundreds of different lessons at all the various levels. The great thing about Justin is he gives off a cool, enthusiastic vibe all the time whether he’s teaching a basic chord for beginners or taking seasoned players through a complex solo.

Non Locking Tremolo FAT/SAT TREMOLO TREMOLOARM-INSTALLATION Der Tremoloarm kann leicht eingesetzt und entfernt werden. Setzen Sie den Arm in die Armöffnung an der Tremolo-Basisplatte. Ziehen Sie den Arm zum Entfernen hoch. TREMOLOARM-EINSTELLUNG (SAT PRO) Zum Einstellen der Höhe des Arms entfernen Sie die Tremolo-Federabdeckung von der Rückseite der Gitarre und verwenden einen 3 mm großen Inbusschlüssel zum drehen der Höheneinstellschraube an der Unterseite des Tremoloblocks.
Many inexpensive starter guitars are built with laminate tops, made from several layers of wood pressed together. While laminate is durable and can be quite attractive, it will not produce as pleasing tones as solid wood. To a lesser extent, this is also true of the guitar’s back and sides—solid woods will produce better tone. When reading guitar specs, if you see terms such as “select spruce top,” that indicates the top is made of laminated woods with a spruce-like grain pattern imprinted on it.
Following the lead of Electro, which was having some success with their cast aluminum alloy bodies, Dobro – still a separate company – introduced its first cast aluminum Dobro Hawaiian electric lap steel guitar, probably in late 1934. Along with the aluminum lap, Dobro also debuted the Standard Guitar, and the Mandolin. Accompanying these was the Dobro Amplifier. All four listed for $67.50. These are all shown in the ’35 Tonk Brothers catalog.
{"product":{"id":"113469598","stock":"instock","price":"539.99","name":"1960s K300 Solid Body Electric Guitar","download":false,"sku_id":"113469598","checksum":"234720911023","rep_id":"site5113469598","displayId":"113469598","sku_display_id":"113469598","sku_rep_id":"site5113469598","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
Use the numbers on the tab to fret spaces on the neck. Unlike normal musical notation, guitar tabs don't tell you which notes to play. Instead, they tell you where to put your fingers. Numbers on the lines correspond to frets on the fretboard. Each number represents a specific fret on the line it's written on. For instance, a "1" on the bottom line means to fret the first fret of the lowest string and play that note.

Ovation, Roundback, Adamas, Legend, Custom Legend, Elite, Applause, Celebrity, Balladeer, Ultra, Thunderbolt and Lyrachord , The Roundback body shape, Roundback design and Roundback Technology, Guitar Bowl Shape, Fingerboard Inlay Design, Sound hole Rosette Design, Adamas Peghead Shape, Bridge Design, Epaulet Design, Soundboard and Sound hole designs, Guitar Tuning Head are protected by one or more US and Foreign Trademarks and Patents.
James Marshall "Jimi" Hendrix was an American guitarist, singer, and songwriter. Although his mainstream career spanned only four years, he is widely regarded as one of the most influential electric guitarists in the history of popular music, and one of the most celebrated musicians of the 20th century. The Rock and Roll Hall of Fame describes him as "arguably the greatest instrumentalist in the history of rock music". Born in Seattle, Washington, Hendrix began playing guitar at the age of 15. In 1961, he enlisted in the US Army; he was granted an honorable discharge the following year. Soon afterward, he moved to Clarksville, Tennessee, and began playing gigs on the chitlin' circuit, ...more on Wikipedia
Every skilled worker needs to look after their tools and musicians are no exception. Sure, wear and tear is normal—especially when you play your instrument often—but a little T.L.C. will ensure your musical gear continues to look, play and sound amazing for years. At Guitar Center Repairs, you'll find a dedicated team of certified musicians who take pride in helping you reach your highest level of playing potential. Make no mistake, your music maker is in the best of hands at GC Repairs. When it comes to looking after your musical equipment, certain things should be left to professionals—pickup installation, wiring customization and structural repair, to name a few. Mind you, there are tasks that every guitarist can take care of at home, including regular polishing and restringing. Of course, not everyone has the time to continually look after their instrument and bringing it to Guitar Center is a great way to save yourself time and ensure that the job gets done right. With that being said, GC's services go well beyond cleaning and string changing. For those of you who own a stringed instrument and find the action is higher than it once was, a truss rod adjustment is definitely in order. Or, maybe you want to personalize the look and sound of your guitar—in which case, an expert will be more than happy to swipe out your pickups for a new set, replace the pickguard or perform any other task to give you an axe that’s entirely your own. Honestly, your best bet is to browse this entire section and see what else is offered in the way of repairs, maintenance and modifications. Who knows, maybe your local GC is having a free guitar setup day, so feel free to have a look around this page or take a swing by the store in your area. Our friendly and knowledgeable staff is always happy to speak with other local musicians and setting up a quick appointment for your instrument will do wonders for your musical enjoyment. From nut and bridge replacements to even amp electronic upgrades, Guitar Center Repairs has you covered.
With this in mind, rather than taking the category chronologically, let’s accept our good fortune in today having all of history’s distortion sounds at our fingertips—so next time out, we’ll look first at those which transform the guitar and amp’s natural tone least, working toward those which balls it up most. In other words, from the least synthetic to the most synthetic-sounding of the genre.
The Fender Hot Rod Pro Junior III is a good example of what the older style beginner amps used to entail. The initial price tag is much higher than the typical beginner amps popular today, but it is also a better made, better sounding tube amp. The Hot Rod Pro Junior III can be cheaper in the long run for guitarists that want to eventually do professional work. Most beginner amps are not powerful enough or sound good enough to quite cut it as a professional amp. The Hot Rod Pro Junior III is a simple amp that provides the bare essentials to get a professional level sound. Going the Hot Rod Pro Junior III route is a bit less conventional for beginners, but it is a solid option to consider if plans of recording or playing live lay in the future.

Under the ’38 Avalon Hawaiian was a Supro Electric Hawaiian Guitar. This had a similar shape but was covered in “radiant crystal silver.” This was not pearloid, as is often assumed, but rather a silver paint (possibly a Duco leftover from the aluminum steels) with a crystalline additive similar to that used on Duolian finishes. The head was slightly rounded. The fingerboard was black. A handrest covered the pickup/tailpiece assembly. One volume control sat on a square plate on the treble side, reminiscent of the previously mentioned Supro Hawaiian Model in the ’38 Sorkin and ’39 Grossman books. This cost $30.
Wouldn't it be great if you could determine what price constitutes a "fair deal" before you made a deal? We think so. That's why we've created iGuide's Real Market Data (RMD) pricing, our proprietary system that does the research for you. It's a guide that gives you updated information on what you should pay for an item or what you should expect to receive - without having to spend hours researching. iGuide's Real Market Data pricing system is the internet's best guide to market value pricing and the only pricing system designed with the consumer in mind. Our exclusive RMD pricing is based on real sales data, gathered from auction sites in near real-time. This ensures you get the most accurate pricing available, as quickly as possible!
These guitars work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Semi-hollowbodies are noted for being able to provide a sweet, plaintive or funky tone. They are used in many genres, including blues, funk, ’60s pop and indie rock. They generally have cello-style F-shaped sound holes, though these can be blocked off to prevent feedback, as in B.B. King's famous Lucille.