Bowers loves combining incredible chops with strong melodies, and his influences read like a “Who’s Who” of guitar heroes. Included are such high-tech players as Steve Morse, John Petrucci, and Steve Howe. While talking with Frank, I learned that he has had two of his Les Pauls customized to accommodate a push-pull tap switch on their tone knobs. In the normal position he has full control of his Seymour Duncan humbuckers; in the pulled-up position he goes to a single coil “spin-a-split” configuration that allows him to get more of a “Tele” tone at zero—or he can dial in a bit more of the other half of the pickup to emulate more of a P-90 sound. The thinner “Tele-ish” tone cuts better, allowing more clarity on his leads and rhythm patches.
I purchased my Dove in 1989 in a mom and pop kind of music store in North GA , actually Cumming GA. I have played it ever since and I have owned many other guitars in my 52 Years in the music business but it has always been my come back acoustic for the sound and playability of the neck slim D stile ,but the sound quality is very much as good as any lots more expensive guitars,the way it holds the overtone of the note long after you play the note in the body is just unbelievable ,my hat's off to which either company wants to claim they built it I am just glad they did!! Damn fine Guitar.Thanks,Victor
As the name implies, a pickup selector is a toggle switch that controls which pickups are being used. Since most electric guitars have at least two pickups, a pickup selector is a crucial piece of the overall tone of your guitar. Pickup placement will create different tones; thus, switching between the bridge and neck pickups will allow you to change the tone of your guitar. With multiple pickups, there are many pickup selection combinations.
It is rare for any brand, let alone an entire company, to stay in business this long and their longevity speaks volumes to the exceptional quality of their instruments. Although they did dabble in electric guitars and basses for a short time, today the company is dedicated to making the finest acoustic guitars possible just as they were over 180 years ago.
I'll second the neck comment, conditionally. My first guitar was a hand-me-down Monterey archtop acoustic that had been my uncle's, and it have a sharp V neck. Out of nostalgia I bought another Monterey on eBay and its cross section feels like a tomato can lying in my hand. After a refret it plays smoother and easier than anything that fat has a right to. The original frets..., not quite.

▽ Your account minimum payment amount is determined by the purchases and balances on your WebBank/Gettington Credit Account. The change in minimum payment amount is based on your minimum payment due on your last statement, and includes an assumption of interest charges and SafeLine fees, as applicable. The change in minimum payment amount does not include some subsequent activity on your account as of your last statement, such as backordered, unshipped, returned or other pending purchases or exchanges; any payments, including partial, missed or returned payments; any fees, including recurring partner program charges, subsequent interest charges, late fees or returned payment fees. It is also subject to change based on shipping address, shipping method, partial shipments and taxes. Your minimum payment amount will not change and the purchase will not reflect on your statement until the order ships. If you have a balance or are making a multiple item purchase, see the Existing Balance Payment Chart.
Setting up an electric guitar will bring out the true potential of that specific instrument. A poorly setup guitar will be harder to play due to high strings and neck bending, and will sound subpar with improper intonation. Electric guitar setup cost will cover all of these adjustments and more. For a price close to $50, your guitar will also have its neck adjusted so that the playability is as good as possible over the entire fret board. In the ideal setup scenario, the string height will be optimized so that playing is easy. The height of the strings should also provide for the best sound as they are able to ring free of the frets, allowing for the cleanest and strongest possible signal for the pickups to capture.
Of course, no-one says you have to use the same mic on each speaker cone. For example the SOS interview with Toby Wright shows an SM57 and an MD421 on separate speakers, and Don Smith mentioned using an SM57 and an AKG C451 on separate speakers when recording Keith Richards. Sylvia Massy Shivy also uses the SM57+MD421 combination, but sounds a note of caution when deciding on the exact positioning of the mics: "You have to be very careful with phase, just check it until the signal is the strongest."
I've owned and played Martin, Ovations, Fender, and Gretsch acoustics but none has thrilled me more than the Breedlove Concert Pursuit with cedar top. The tone is definitely different - so balanced and the midrange really shines. Absolute joy to play despite this is not their top line. Not so much a strumming guitar - shines when finger picked. Last but not least, the tone when plugged in is so deep and warm it astounded me. Far better than the others I've had.
If the fuzz is the grandaddy, the Arbiter/England Fuzz Face (introduced 1966) is the grand-poobah of the grandaddies’ social club. A handful of other fuzzes came first, but this distinctive round, smiling box is the one most guitarists point to when identifying the fuzz tone of the gods. Why? Two words: Jimi Hendrix. Apparently he died and took it up there with him. Oh, and two other words: germanium transistors. When these fuzz fans point to the Fuzz Face, however, they don’t point to just any Fuzz Face. They point to a good one. The quality of these pedals varies wildly, mainly because the tolerances of germanium transistors themselves varies wildly and sorting out the good ones was more work than the makers could afford to put in (or, perhaps, knew was necessary). Contemporary makers from Fulltone to Z.Vex to Mayer take the time and trouble to laboriously sort their germanium transistors, and it pays in spades in terms of tone and consistency.

This is a real nice D-18 it Booms quite nicely with Vintage Tone of that of a much more expensive Big Named guitar for a fraction of what you would pay..its Japanese crafted 29 years ago by the master craftsman in one of the finest Japanese builders factory.. the great Ibanez...the Label inside says... THE MARK OF QUALITY CIMAR Quality Produced under Strict Quality Control by IBANEZ "Made in Japan" Serial # 82110013k ... 1st 2 digits 82 that's the year...now not all Japanese Ibanez old guitars are so great not at all ..many were very low end guitars we saw in the 60's & 70's as a kid myself most were junk or we called them toys.. now that's not true for all of them though I can honestly say that... This is not a cheap guitar nor is it built cheaply ..this example was one of the good impressive one's they used beautiful grade woods on... This particular example it has a Strikingly beautiful straight grained Sitka Spruce Top ... it has ambered nicely now naturally with it's great patina created over the last 29 years . ya don't get that with a new Ibanez or even dare I say Martin with those white looking spruce top "yuck on thanks"... sorry back to this one ... The back sides & neck are all gorgeously grained AA higher grade Mahogany the fingerboard is dark Indian Rosewood with an ebony bridge..even the Original string Pins are aged beautifully amber tipped... I'm lookin pretty hard everywhere and I can not find a crack - separation or a defect to be found anywhere only the most minute microscopic its that clean.... JVG Condition RATED: @ better than average in Excellent used vintage condition wow!..This neck is arrow straight with a perfect medium slim taper neck feels great and action is EZ to play just about perfect...1-11/16ths at the nut very comfortable feel, frets are considered excellent vintage at lest 92%... Comes with a free Chip board case or an optional upgrade to a Hard shell case / ask... Just in.. no pics yet coming very soon stay tuned! Thanks for your interest.


The Effect: When it comes to effects pedals, those which offer more than one type of effect are usually seen as the best cost effective solution out there. Although many still prefer that standard, standalone configuration, multi-effects pedals have a lot to offer. Take Carl Martin Multi Effects Pedal as an example. This thing is packed to the brim with boutique level effects. Easy to use, a board such as this one can substitute a whole pedalboard depending on the variety of effects you use. One of the other great features of this design is the fact that multi-effect pedals come in both digital and analog form. They have transcended that artificial sounding performance that plagued effects processors some 10 years ago. Today, a multi-effects pedal is every bit as capable as its standalone counterparts. While this design is aimed at everyone, budget oriented users stand to gain the most from it.
In typical pedal effect chains you will most likely be running cable lengths that are much longer than 5.5 meters. The ME-80 allows you to keep your tone pure when running lots of effects. You can run a cable up to 5.5 metres into the input of the ME-80. The multi effects engine processes up to 8 effects in its internal signal chain. Then the ME-80 outputs your guitar signal as a 2,000 Ohm low impedance signal allowing you to run a much longer cable to the amplifier.
Players perceived a loss of the initial high quality of Fender guitars after the company was taken over by CBS in 1965. As a result, the late-1960s Stratocasters with the large “CBS” headstock and (from the mid 1970s) the 3-bolt necked models (instead of the conventional 4 bolts) with the “Bullet” truss-rod and the MicroTilt adjustment system fell out of fashion. However, many blues-influenced artists of the late 1960s soon adopted the Stratocaster as their main instrument, reviving the guitar’s popularity. Also, so-called ‘pre-CBS’ Stratocasters are, accordingly, quite sought-after and expensive due to the perceived difference in quality even compared with contemporary post-CBS models. In recent times, some Stratocasters manufactured from 1954 to 1958 have sold for more than US$175,000.
{"eVar4":"shop: guitars","pageName":"[mf] shop: guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[mf] shop: guitars","prop1":"[mf] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[mf] shop: guitars","prop6":"[mf] shop: guitars","prop3":"[mf] shop: guitars","prop4":"[mf] shop: guitars","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] category"}
HERE WE HAVE A TOTALLY  COOL 50’s HARMONY STRATOTONE PEANUT MODEL SOLID BODY GUITAR......ALL ORIGINAL: TUNERS, TAILPIECE, PICKGUARD, ETC...PICKUP DATED 1957...COOL COPPER RELIC LOOKING FINISH...STRAIGHT NECK GOOD ACTION..FREE US48 SHIPPING WITH BUY IT NOW...S H $60...**WE SHIP INTERNATIONAL** NO PROBLEM...LOCAL PICKUP OK...ANY QUESTIONS EMAIL US OR TEXT/CALL 305.773.4539...CC & PAYPAL OK... BE SURE TO CHECK THE BANANA GUITARS EBAY STORE FOR MORE COOL STUFF AND WATCH FOR MORE COOL GUITARS I WILL BE LISTING...THANX&ENJOYIT! ALL IMAGES & DESIGNS PROPERTY OF  BANANA GUITARS INC. RETURNS ACCEPTED AS PER EBAY  RULES ONLY IF NOT AS DESCRIBED

You don't have to use plug-ins! Some synths such as the Virus TI have very flexible effects built in. You don't have to create audio effects in your sequencer. For example, I use the Access Virus synth, which features a simple delay effect, with the added bonus that all its parameters are available in the modulation matrix. One favourite trick involves routing velocity to the delay colour parameter. For parts that get brighter with increased velocity, it adds extra animation and bite if the echoes also get brighter. Unusually, the Virus also features four-way audio panning, so you can position an audio signal anywhere between the main stereo outputs and a second pair. If the second pair of outputs is routed to an external effects unit, you can play with the concept of moving a note around in a space, where its position also determines the treatment it gets. More fun can be had by modulating reverb time and colour via an LFO. The same LFO can then be used to control filter cutoff, EQ frequency and maybe wavetable position too (if your Virus is a TI). In this way, timbral changes happen at the same time as effect changes. Paul Nagle

The SSL-10 had become the SSX-10 ($387), with humbucker/single/single pickups, pretty much the same. This came with jumbo frets, a satin-finished neck and a 14 degree backward pitch on the head. The rosewood ‘board now sported the “wave” or triangular wave inlays popular on Kramers, Charvels and Jacksons of the period. No mention is made of vibrato, but that doesn’t mean it didn’t have a tradition-style unit. Colors were now Carrera midnight blue, metallic black, purple burst, dark red, white pearl and blue pearl, all with chrome hardware.


Guitar wiring refers to the electrical components, and interconnections thereof, inside an electric guitar (and, by extension, other electric instruments like the bass guitar or mandolin). It most commonly consists of pickups, potentiometers to adjust volume and tone, a switch to select between different pickups (if the instrument has more than one), and the output socket. There may be additional controls for specific functions; the most common of these are described below.

While it is well loved for its HD amp models, it also packs quite a lot of effects (over 100!), applying the same HD modeling technology on actual stompboxes to get them to sound as close to the real thing as possible. The amp modeling and effects section together allow for a wide variety of tones, while the deep controls that you have over each amp and effect parameter allows for even more in-between tones, so you can craft your very own sound. The LED rings add to the unit's overall eye candy and improve the already intuitive interface of the unit. It also houses extensive input and output options, including having its very own mic preamp, so you can use it for a variety of instruments and even vocals. Other features include built-in 48-second looping, tuning and compatibility with Line 6' modeling instrument (Variax) and amps.

One of two guitar plug-ins that we’ve carried over from last year, VB-1 is one of the older plug-ins that Steinberg once sold and, along with the fantastic Model-E synth, is still available for download. As you might expect from the picture and the name, it emulates a proper bass guitar – not the easiest instrument to properly reproduce electronically.


On some amps with a number of input and output jacks, the jacks may be consolidated in a patch bay. Some amps have an input jack for a foot-operated switch which can be used to turn on an effect or switch to a solo channel. Some higher-end amps have a Speakon speaker jack for an extension speaker. In the 2010s, the Speakon jack is often used in high wattage amplifiers, because the design of the connector, which is shielded from human touch, prevents electrical shock from a high-powered amplifier. Some amplifiers have a "tuner out" jack, for sending the instrument signal to an external electronic tuner. Bass speaker cabinets often have two 1/4" jacks. These are provided so that one speaker cable can be plugged into the first jack and connected to the power amp; if the bassist wants to use a second cabinet, a second speaker cable is plugged into the second jack and then into second speaker.
pay is about HALF of what it should be for this expensive of a product, when a factory is turning out nearly $1 million a week in profits from one factory with less than 50 employees, they should make more than the salary cap of $12-$15 per hr, the only reason you make a decent living wage is because you work so much you don't have any time to live. You may have time to go home and sleep (and eat something, if you're VERY lucky, most days i don't even have the energy to wake up and eat once i get home.
After Fender’s decision in 1982 to switch Squier’s production from strings to guitars, the Stratocaster was one of the first models put under the Squier production line in Japan. It was the most commercially successful guitar Fender had produced. Originally in 1982, the headstock had a “Fender” name written in large script, followed by “Squier series” in smaller script. In 1983, this was later changed to the current 1970s large headstock featuring “Squier” in larger script, followed by “by Fender” in smaller script. Since then, there have been several variations of headstock size and Squier logos, typically based on what series the guitar is.
There were actually two bolt-neck DT-250s, both with basswood bodies and the very nice locking Powerocker vibratos. The regular model came in black or white and had a rosewood fingerboard. Well, a little boring. But the Transparent Red TRs came with a maple fingerboard stained red. Yes, that’s what we’re talking about! If you’re going to have a red guitar, you ought to have a matching red fingerboard. Hard maple, made slick with the red polyurethane.
Some single cabinets use mixed speaker sizes, although this is less common. Examples include MESA Engineering's 1x15"/4x10" cabinet,[8] Peavey's PVH 1516, which has 1x15" and 2x8" speakers.[9] and Traynor's TC1510 combo, which has 1x15" and 2x10". Other large single cabinets with speaker sizes other than 10", 12" or 15" are less commonly used, but they do exist. Examples include the 6x8" and 8x8" cab configurations. Users of two cabinets may use two 4x10" cabinets (more easy to transport than a single 8x10" cab), a 15" cab and a 2x10" cab, or other variations (e.g., a 2x15" cab and a 4x10" cab).
This guitar is simply phenomenol and the build quality, materials, and attention to detail are just mind blowing! I have a collection of vintage Golden Era Gibsons, Fenders, Gretschs, and Martins, so it takes a very special guitar to impress me. The Kraus OM delivers in every way! Just check out the rosette: Paua shell bordered by curly Koa wood inlayed into a red Spruce top-simply amazing! And the curly koa fretboard binding is a sight to behold! The Honduran Rosewood is becoming exceeding hard to find, and will probably go the way of Brazilian Rosewood as a protected wood soon. The Honduran Rosewood used on this guitar took months to source, and it looks spectacular! The guitar itself took 16 months to build, and the wait was well worth it, and well beyond expectations!
I've had a Sunburst pattern Ventura when I was a teenager.. it was a nice guitar and played well. recently i saw a really well made Oscar Schmidt gs-1 . not expensive at all. My main guitar for many years was a Gibson howard roberts "artist" dove style. wine red and mother of pearl inlay and gold plated. I eventually sold it to a lady in alaska that plays a lot of blue grass and pop. I got full money out of it. I had it 25 years, so it was vintage by now.

Though because of this flexibility, it can be hard to figure which of the many types of electric guitar is going to be a good fit for your needs. Thankfully, if you’ve arrived at this article you’re going to get all of the information that you need to make an informed decision on which body styles are going to be worth considering for your genre of choice.
What is the best acoustic guitar brand? That's subjective, and often based on a consumer's past experiences with a specific brand. This list includes a vast majority of the most recognizable good acoustic guitar brand names that are currently on the market. This list includes those acoustic guitar brands that consumers might wish to learn more about.
Jimmie Vaughan: based on Jimmie’s own ’57 Stratocaster, the Jimmie Vaughan Tex-Mex Strat reflects his deep roots, traditional style, and preferred Strat features. Noteable for it’s alder body, 3 Fender Tex-Mex single-coil pickups, an extra-hot bridge pickup, a special tinted maple 1957-type V-shaped neck with maple fretboard and medium-jumbo frets, vintage machine heads, original Fender synchronized tremolo, and custom tone control wiring. Tone, tone and more tone.
{ "thumbImageID": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "defaultDisplayName": "Fender Kurt Cobain Jaguar NOS Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst Rosewood Fingerboard", "sku": "sku:site51398177063833", "price": "1,224.99", "regularPrice": "1,224.99", "msrpPrice": "1,225.01", "priceVisibility": "1", "skuUrl": "/Fender/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard-1398177063833.gc", "skuImageId": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001-00-60x60.jpg", "imgAlt": "" } ] }
When considering the guitar from a historical perspective, the musical instrument used is as important as the musical language and style of the particular period. As an example: It is impossible to play a historically informed de Visee or Corbetta (baroque guitarist-composers) on a modern classical guitar. The reason is that the baroque guitar used courses, which are two strings close together (in unison), that are plucked together. This gives baroque guitars an unmistakable sound characteristic and tonal texture that is an integral part of an interpretation. Additionally the sound aesthetic of the baroque guitar (with its strong overtone presence) is very different from modern classical type guitars, as is shown below.
This should give you an idea of when the majority of the production for any one model occured (majority meaning more than 5 instruments per year). Note this does not mean a model can not exist outside of these years - it certainly can. Just these are the years recorded by Martin in their ledgers. Note this list (for the most part) does not go past 1969.
Teisco's very FIRST solid body electric guitar, the 1954 Teisco, Model J-1. 1 single coil Pickup. Front plate says, "NIHON ONPA KOGYO CO. LTD TEISCO". Back plate says, "TEISCO ELECTRIC GUITER MODEL J1". Yes, Guitar is misspelled as "GUITER"!. Maple neck is a "ball bat" with very pronounce "V". Guitar is currently set up for slide with "flat-wounds". VERY ROUGH CONDITION and lots of "character". Where to start, hm....? Firstly it has termite, yes, termite damage to the back. Don't ask me how, I don't know. The top is veneered with a beautiful quilted maple, but is missing a big section on the front. The tailpiece is missing it's cover. The wood bridge is partially inverted and sagging, due to string tension. The pick guard is warped (normal to many vintage guitars). We're pretty sure the brown bakelite knobs, while cool, are not original. Some of the frets have been changed, mostly by removing from the last 6 slots and relocated. 95% of the veneer is missing from the back. The tuners are mostly original with a couple of replacement gears. A couple of the tuner button shafts are bent, but tuners still function. The great thing is the way it is currently set up, it makes a heck of a "slide guitar". The original pickup sounds incredible through both our shop Trace Elliot and Marshall JCM-800!!! No case included.
After you have good coverage, let it dry for a few days or until it has hardened up enough. Inspect the surface for and runs or imperfections. If there are any runs them you can wet sand them flat with 800 grit wet sand paper and a sanding block. Usualy you will be able to see if there is any grain showing that you might not have filled up when you preped the body. If there is them apply a few more coats to cover it up and wet sand it to make it level.
If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
Guitar technicians need a high school diploma or equivalent, though some community colleges offer programs in guitar technology. Apprenticeships or on-the-job training may also be available. These professionals should have hearing acuity for tone and pitch and the ability to play guitar. They should know how to use electronic tuning devices, as well as hand and power tools. Guitar technicians should also be skilled at woodworking. According to 2015 data from the U.S. Bureau of Labor Statistics, musical instrument repairs earn a median salary of $35,660.

Hi Teo, both amps are great for beginners. I have both personally, so I know that the Vox is great for classic British tones and some heavy Rock n Roll distortion, however, if you want a more heavy metal sound the Orange would suit that better as the overdrive is very powerful. It comes down to personal preference really so I suggest you try both out! -Lee


A Volume pedal is a volume potentiometer that is tilted forward or back by foot. A volume pedal enables a musician to adjust the volume of their instrument while they are performing. Volume pedals can also be used to make the guitar's notes or chords fade in and out. This allows the percussive plucking of the strings to be softened or eliminated entirely, imparting a human-vocal sound. Volume pedals are also widely used with pedal steel guitars in country music. It has also been used to great effect in rock music; the Pat McGee Band's live version of "Can't Miss What You Never Had" on General Admission illustrates what the pedal is capable of. Some volume pedals are:
Bring up the topic of electrics, and Martin is hardly the first name of recall. The term “electrics” is not meant to include the company’s many fine acoustic-electric guitars, many sporting top-notch electronics (which ultimately remain acoustic beasts), but rather electric guitars meant for country chicken pickin’ or raunchy rock and roll. However, beginning in the early ’60s, Martin has launched periodic forays into the electric guitar marketplace with some very interesting, if commercially unsuccessful, results (which explains why the Martin name doesn’t come immediately to mind). Most coverage of the Martin brand is focused, quite rightly, on their substantial acoustic achievements. For this essay, however, let’s take an alternative view and look at the company’s various electric guitars, its thinline hollowbodies and later solidbodies.
Thanks for the list. Michael Gurian was a luthier in NYC who began as a classical guitar maker then began making steel string instuments in the 1960’s , I remember seeing his instruments shortly after i bought My first Martin in the dog years of the 70’s along wi Don Gallaghers instruments. Recently acquired one of his jumbos in Brazilian rosewood made in 1971 still in remarkable condition. He was among the first to compete as luthier with the big boys at Martin and gibson , even before Bob taylor jumped in.
The same no-compromise attitude that gives the Newporter Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech - NuBone nut and saddle for greater sustain and a Fishman preamp system that makes it easy to plug in without sacrificing the guitar's natural sound. Its lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style, and its walnut fingerboard and bridge further augment this instrument's vibrant tone.
Yamaha continues to rank highly in the entry to mid-tier guitar market, thanks to their student friendly instruments. I for one took classical guitar lessons with a Yamaha classical that still plays and sound great up to this day. As expected, they have an entry in this affordable price range category, in the form of the 3/4 size JR1, which is essentially a smaller version of Yamaha's popular FG acoustic guitar.
No reference materials are available to me for this early Unicord period of Univox amplifiers, but there was undoubtedly a line. These American-made amps featured tubes and use high-end Jensen speakers. The Univox logo was on the upper right corner of the grille on a large piece of plastic. The cabinet was covered in charcoal-flecked tolex with white beading, with a grey grillcloth. Front-mounted controls included two inputs, volume, tone, tremolo with speed and intensity, plus footswitch jack with footswitch. The jewel light on these early Univox amps was a little red square.
sorry this has SOLD OUT: Poor mans Authentic Blues Parlor guitar from way back. This is the real deal used over 60 years this is what some poor share cropper genuine American Blues men would have been able to afford back in the day and subsequently used throughout the south by mostly poor Black folks where the berth of the blues was born of course this is from the place where great things happen BORN in USA baby and is widely considered and is acknowledged to be by most all of our greats in US or British Rockers - Jazz players & Country too all these greats players feel that these original US Southland blues is the truest of ART FORM's PURE and RAW ....you feel it in your soul... this original sounds was not overly sophisticated at all it was RAW that was its beauty this sound from this old Stella is Authentic like that and is RAW and its woods are good - solid Burch wood and actually is an excellent tone wood in fact in those days Burch was widely used and my belief is that is a characteristic in the tone of this Original blues... Classic sound to this guitar OK it has it.... I have a few of these Stella's and love them, when you want to record and lay down an authentic REAL old school style rhythm track or play it on your porch swing and sip mint julip from a mason jar to get in the mood you can do it with this guitar its the real deal. This guitar is old did I say at least 60 likely older that being said it plays well it really kinda does... with pretty good action for what it is as good as it was 60+ years ago I recon. Tuners work, body is in good shape it aint goin anywhere its prety well made it has surface cracks and they are there and not a problem they have been there 40 years and have not gotten any worse not in the 15 years I have owned Stella! Like the movie STELLA! I could not resist the reference but I digress, Condition is Vintage good obviously not new or mint but she is 100% cool Authentic bluesman material if you want that old time Mississippi Delta to Chicago raw blues this old vintage American Icon of a Poor mans Parlor guitar, this is a classic threw & threw... I suppose I could have simply said it sounds good.... ahow ow ow ow.
ARTIN IS NOT THE BEST ACOUSTIC GUITAR. Any Taylor of the same price range WILL BEAT THE BRAKES OFF A GUITAR IN THAT SAME PRICE RANGE! In fact, most profession guitar players switched from Martin to Taylor for that reason Dave Matthews Clapton jack Johnson BUT MARTIN OR TAYLOR ARE THE LEADERS IN THE ACOUSTIC GUITARS! Epiphone master built is another great choice if you are looking for a great 3-500 price range..the ONLY REASON THEY DONT COMPETE WITH MARTIN IS BC FEW PEOPLE KNOW ABOUT THEM! You can buy a Martin that sounds just same but you'll triple the price! Alvarez yari is another well built wonderful guitar but again &1000-1300 against the epiphone masterbilt. Low price great sound go masterbilt about anything else go Taylor
The best guitar I've found so far is my Westone Thunder 1a, from Matsumoku factory in Japan, 1982, which I got 2nd hand for £255. This has phase switching. coil split and an integrated preamp and EQ. It's got a 3 piece laminate neck with the centre strip at a right angle to the outer strips. It's got a brass bridge, nut, and knobs. It's 34 years old and the neck is as straight as an arrow. This guitar comes closest to having everything I could want in a guitar.
Another great book by Nicolas, this one shows you exactly how to create your own personal tone using amplifiers, effects and your guitar itself. Any beginner will benefit from this clearly written guide including everything from a breakdown of all the different ways to individualize your guitar playing technique, to information about virtual effects.
This is the main component that separates acoustic guitars from electric guitars. A pickup senses the vibration from a string, transfers it to the guitar amplifier which then transfers it to the loudspeaker. There are many pickups but we’ll cover the four basic ones. The single coil pickup has a single coil of wire with two horseshoe-shaped magnets. They produce a bright, cutting sound and are quite noisy. The P90 pickup is a single coil pickup with one wide coil that increases the surface area of the strings, producing a bigger yet less bright sound. Humbucker pickups were designed with twin coils. They produce richer, warmer, more powerful sounds but roll back some higher frequency sound. Active-passive pickups use a battery-powered circuit to produce a powerful yet balanced tone across a range of frequencies. It outputs a balanced, clean tone.
This thing is awesome! For its price you can't find any other processor that can plug into your computer and easily navigate the pedals. To connect to your computer or laptop you will need a standard printer cable (I would pick up one of the amazon basic cables for cheap.) I bought a 10 foot one which is plenty to run from the pedal to my music stand. Also once you are connected to your laptop via the USBcable, all sounds from your laptop will run through your amp/headphones. That confused me the first time when my computer speakers sounded better, haha. If you are curious, It comes with a power supply.

Fuzz boxes and other heavy distortions can produce unwanted dissonances when playing chords. To get around this, guitar players (and keyboard players) using these effects may restrict their playing to single notes and simple "power chords" (root, fifth, and octave). Indeed, with the most extreme fuzz pedals, players may choose to play mostly single notes, because the fuzz can make even single notes sound very thick and heavy. Heavy distortion also tends to limit the player's control of dynamics (loudness and softness) - similar to the limitations imposed on a Hammond organ player (Hammond organ does not produce louder or softer sounds depending on how hard or soft the performer plays the keys; however, the performer can still control the volume with drawbars and the expression pedal). Heavy metal music has evolved around these restrictions, using complex rhythms and timing for expression and excitement. Lighter distortions and overdrives can be used with triadic chords and seventh chords; as well, lighter overdrive allows more control of dynamics.[citation needed]


The Streamliner concept is simple: to create more affordable Gretsch guitars without losing their specific DNA. Two new Broad'Tron humbuckers are controlled in classic Gretsch style by a three-way toggle selector switch on the bass side shoulder, a master volume on the treble side horn, and then a trio of controls by the treble-side f-hole for individual-pickup volume and master tone. The G2622's construction gives a different response and resonance to other new releases from Gretsch and, with these pickups, moves further from the Gretsch sound. And while its construction gives it a more solid, or at least ES-335, character, it's a little more airy and less punchy with a softer, squashier tonality. The beefier pickups certainly don't nail a classic Gretsch tonality - although if that's what you want, the full-size pickups are easy to replace - but they do broaden the sonic potential, especially for more gained styles, while staying close to the classic iconography. If you want a great-value semi-hollow, this is among the best electric guitars for under $500.
We specialise in 1960s and 1970s parts and literature, relating to American and European guitars and basses. Specifically Gibson, Guild and Vox. The parts for sale on this site are sorted by brand and type, or you can search for keywords in the box above. We have a lot of parts unlisted on this site - if you do not see the part you need, please ask.

When connecting more than one pickup, it’s important to follow the manufacturer’s color codes and wiring diagrams so that the phase relationship is correct. The phase relationship of a pickup is determined by the winding direction of the coil and the polarity of the magnets. The two coils of the traditional humbucker are connected in series with the phase relationship shown in Fig. 1. Most modern Stratocaster® style guitars with three single-coil pickups are supplied with a reverse wound/reverse polarity middle pickup for a parallel hum canceling effect when the guitar is switched to a two pickup position (e.g. neck & middle pickup together) as shown in Fig. 2.
Delay is essentially echo, but it can be so much more when used well. The two most important knobs are “time” and “repeats”. Time will increase the length between repeats, and repeats will adjust how many echoes are heard. While it is tempting to max the repeats and enter space rock land, less can be more. Used gently you can get reverb or slap-back rockabilly sounds. With careful knob setting you can even create harmonies and loops like The Edge.
In some small to mid-size venues, such as bars and nightclubs, the PA system may not have the capacity to provide the bass sound for the venue, and the PA system may be used mainly for vocals. Bass players in bands that play at a variety of venues, including these types of small to mid-size venues, may need to be able to provide the bass sound for the venue, and so they will require a large combo amp or bass stack with this capability.
I just recently started to try to" really learn" to play guitar. I've known a few "not too difficult" songs for years. Now at 45yrs. old I bought a couple of cord books and it's bittersweet. It's such a wonderful feeling to play songs all the way to the end with a friend of mine who told me years ago that I had a good natural musical ability. I've learned more in 3 or 4 months than in 25 years. But enough about that... I was handed a jumbo GUILD from I believe around the early 70's. I've never heard anything like it. I must have one!!!
According to the official information Guitar Tricks has more than double the number of song lessons than any other guitar learning site. It goes on to say that there are more than 600 but I feel that the number could be even higher by now because new songs are added regularly. The songs available on Guitar Tricks are the ones that I want to learn, oldies and modern songs from major artists like The Beatles, The Rolling Stones, Eagles, Blink-182, Extreme, Good Charlotte and many more. Check out this list of Guitar Tricks Artists. Did I mention that lots of songs have a beginner and an advanced level lesson? I just love that the advanced level songs are taught based on the original arrangement and not some vague resemblance used to avoid copyright issues. This is because Guitar Tricks has licenses for teaching the original songs.
Note: Youpi Choupi's answer calls my answer below into question by pointing out that classical and flamenco guitars are acoustic guitars. He is correct in this of course, they are all types of acoustic guitar. However, most of the time when someone says they play "acoustic guitar," they mean the commonly used steel-stringed acoustic that most rock, folk, country and other artists play, and I believe this was the intent of the OP when they asked the question. Hence, an answer simply pointing out that Spanish guitar and acoustic guitar are both acoustic guitars would not have been a helpful answer.
Nickel trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

If you know how to play an E major chord, then you know how to play an A minor chord—just move the chord whole shape over a string. Make sure your first finger is curled, so the open first string rings clearly. Avoid playing the open sixth string when strumming the A minor chord. There are situations when it makes sense to reverse your second and third fingers when playing the A minor chord.
If you’re a guitar lover, you might be out for a unique look as well as your own sound. You might also be interested to learn more about how guitars are put together and function. If you have moderate woodworking skills, you can build your own solid-body electric guitar. To make things easier, you can even purchase some parts pre-made. Use your creativity for the finishing touches, and you’ll have a unique guitar and a story to tell.
In addition to guitars, Gibson offers consumer electronics through its subsidiaries Gibson Innovations (Philips brand), TEAC Corporation (TEAC and Esoteric brands), Onkyo Corporation (Onkyo and Pioneer brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems, pianos from their wholly owned subsidiary Baldwin Piano, and music software from Cakewalk. (See section #Instruments)

SolidBody (2008) – Taylor’s take on a traditional solid electric guitar. Made from a solid slab of wood with cavities only for the pickguard or direct mounted pickups, and the bridge. Designed from the ground up, each SolidBody model features solderless pickups or a solderless pickguard which permit for musicians to effortlessly change the sound of their guitar. The SolidBody line is fully customizable with a wide combination of wood, colors and electronic configurations, and single or double cutaway options which enables anyone purchasing a SolidBody to get the sound and look that they want. All options are available for customization through Taylor’s SolidBody Configurator on the Taylor website.
Parallel coils: coil tap connection needs to be broken for this kind of wiring, so three lead pickups cannot be wired this way. The idea is to join start of each coil with finish of the other coil. One on those connections will be hot, the other ground. Parallel coils will sound more like a single coil sound, noticeably quieter and shallower than a series connection.
Ovation guitars are produced in the U.S. as well as in Korea and China. Those models in general have a wooden top. Recently Ovation significantly reduced the production of U.S. made Ovation models. From 2010 on better models (e.g., Legend, Elite, Custom Legend, Custom Elite) used to be available, both, made in the U.S. and made in Korea. Before that, the mentioned models were U.S. made. In recent years many U.S. made guitars could be identified by the LX in the product name (e.g., Legend 2077LX), whereas the Korean-made version of the same guitar had AX in its model name (e.g., Legend 2077AX). Again, this name-system has not been used throughout the whole guitar model range (e.g., Ovation 1617ALE). Nowadays only a few U.S. made models are being produced, mostly signature and limited edition models (e.g., Custom Legend 1769-ADII Al DiMeola). Production of the standard model range of Ovation guitars in the U.S. has been seized.[24]
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Ibanez AEQ200T - String Instrument Finish: High Gloss Natural
A hillock appeared again, but at 350Hz. This is really into the human voice range now. The curve is no longer a curve, but a flat line, and the -10dB point shifted at 800Hz. the guitar will sound dark, moody, the kind of muted tone they use in clean guitar stereotypical rhytmic jazz chords. On the oscilloscope, we will barely see the small fringes of the higher order magnitude signals, and a more sine-like wave.
Ovation backed off from its more exotic design directions and in ’77 introduced two more conservative models, the Preacher and the Viper, and its first solidbody basses, the Magnum I and II. The Preacher featured two equal cutaways, whereas the Viper sported more of a Les-Paul-style single cutaway, though neither would never be confused with a Gibson equivalent. Their shape was, in fact, essentially a downsized version of the Ovation acoustic outline. The Magnum shape was derived from the earlier Breadwinner and Deacon, with more contouring.
I purchased this as a replacement for my acoustic guitar of 15 years. I couldn't be more pleased with the purchase. The construction is excellent without gaps or excess glue around joints. The top is solid sitka spruce which is a very attractive feature at any price point let alone $200. The aesthetics on the DG800 are simple and the design on the head stock is painted and will rub off with time. However that has no bearing on the overall fit and finish of this guitar, both of which are excellent for a <$1000 guitar.
Steve's a great technician. He's done a great job on every single guitar I've brought to him. Helpful, easy going, friendly, and extremely good at what he does. After the first setup he did for me I stopped looking for other repair shops in town. He's just too good and is a pleasure to do business with. I hesitate giving 5 star reviews, but anyone who can turn a nigh-unplayable Dano baritone into a gigging instrument deserves it. Highly recommended.

Almost all big guitar makers have their affordable entry level guitar models and product lines. Guitar for beginners is a market that none want to ignore. The famous acoustic guitar makers in Northern America like Martin, Taylor  and Seagull provide high quality acoustic guitars for professionals and experienced guitarists. They build their brand image among the guitarists by making great sounding and great craftsmanship guitar.

The Teisco J-1 was a natural maple-topped guitar with a single pickup near the adjustable wooden bridge, a large affair with a metal cover with six slots parallel to the strings and two round bulbs on either side, very space-age! The stop tail was probably rounded, allowing strings to pass through the body, and was covered with a square metal plate. A small pickguard sat between the pickup and the neck. A volume and tone control sat on another little piece of plastic down on the lower treble bout. Knobs were white plastic knurled with a silver ring around the top.
Little-known manufacturer from Osaka, Japan, this company is responsible for the oddly named John Bennet badge. Nakai has been mentioned as a possible Matusmoto Musical Instruments Association member in the past. The company still exists and is producing musical instruments, quite a feat in light of so many manufacturers who faded after the golden electric guitar age.

Simon Stockhausen began his stellar musical career at the age of five. His multi-faceted and wide-ranging oeuvre has since embraced all manner of projects and styles, including jazz and improvisational collaborations, countless compositions for ensembles and chamber groups as well as work for major European theatre companies and orchestras including the Hamburg and Berlin Philharmonic Orchestras. In 2009 he further extended the range of his musical endeavors with the creation of a sound design company through which he produces sounds, patches and libraries for software synths and plug-ins, serving sound designers, musicians and post production professionals.


The original run of Marshall Silver Jubilee amps were designed to celebrate Jim Marshall's 50th anniversary in music as well as 25 years of Marshall amps. These beautiful sounding (and highly sought after) amps have been brought back from extinction with the Marshall 2525H Mini Silver Jubilee Head, matching cab and combo and have been constructed using the original 2525 diagrams. This means you have all that vintage sounding goodness with modern reliability. You can even switch it from 20 Watt to 5 Watt power so you can go from live sound to home practice easily without ever losing your tone. A great amp for stage, home and studio recording.

Gibson’s electric guitars generally sport humbucker pickups, known for their thicker, rounder tone. You also get less feedback, which limits the types of delay and overdrive tones you can experiment with, but ensures a cleaner and more consistent sound. Gibson mainly uses mahogany for their guitar bodies, which is what gives it that slightly darker sound.
A partial PA is harder to define, but it's essentially any PA system that doesn't have the capacity to mic your whole band. More often than not, in these situations, mics end up on the kick drum and snare drum for the reasons outlined above. In this case, it does help to have a little extra juice in your amplifier, but try to keep it tamed, nonetheless.
You don’t need to be the new Bob Dylan of lyrics to write a song. Writing a song with your own lyrics and vocal melody will help you learn how your guitar fits into songs. Phrasing, space, when to play rhythm, when to think about any solo (see 13), chord changes etc. You don’t have to share it. But do it for yourself. It will help you understand songs much better.
guitar brands german guitar brands best korean guitars korean guitar factory korean guitar manufacturers korean guitar to ukulele manufacturers south korean guitars korean guitars acoustic all electric guitar brands good quality guitar brands acoustic bass guitar brands electric bass guitar brands quality acoustic guitar brands acoustic electric guitar brands good guitar brands More...
3) Had a little fret buzz on the high E but that was probably more my fault than anything else because I changed the light gauge strings to extra lights which sometimes requires the neck adjustment to be loosened. This guitar is set up from the factory with light gauge strings which means if you put on extra lights, the neck will have a tendency to straighten out too much which brings your strings closer to the frets and sometimes results in fret buzz. An easy fix though...just take a straight edge, like an aluminum yardstick, and lay on the neck, or hold down the string on the first and last fret and you should have just a slight space (approx. 1/64" - 1/32") between the frets and strings in the middle of your fret board. In other words, contrary to popular belief the neck is supposed to have an ever-so-slight dip in the middle and IS NOT supposed to be perfectly straight. My guitar required about a 3/4 turn (loosened) on the neck adjustment to fix the fret buzz. And, remember when adjusting the neck don't expect immediate results. Give the neck time to settle-in adjusting a little at a time and then waiting a couple hours or so before checking it again. If you still have fret buzz after adjusting the neck then it most likely will be at the nut because Yamaha keeps their action really low at the nut. If so, just take a piece of paper and put it under the string at the nut which should be an easy fix.
3) Had a little fret buzz on the high E but that was probably more my fault than anything else because I changed the light gauge strings to extra lights which sometimes requires the neck adjustment to be loosened. This guitar is set up from the factory with light gauge strings which means if you put on extra lights, the neck will have a tendency to straighten out too much which brings your strings closer to the frets and sometimes results in fret buzz. An easy fix though...just take a straight edge, like an aluminum yardstick, and lay on the neck, or hold down the string on the first and last fret and you should have just a slight space (approx. 1/64" - 1/32") between the frets and strings in the middle of your fret board. In other words, contrary to popular belief the neck is supposed to have an ever-so-slight dip in the middle and IS NOT supposed to be perfectly straight. My guitar required about a 3/4 turn (loosened) on the neck adjustment to fix the fret buzz. And, remember when adjusting the neck don't expect immediate results. Give the neck time to settle-in adjusting a little at a time and then waiting a couple hours or so before checking it again. If you still have fret buzz after adjusting the neck then it most likely will be at the nut because Yamaha keeps their action really low at the nut. If so, just take a piece of paper and put it under the string at the nut which should be an easy fix.
You know Eddie Van Halen, that legendary guitar player who pretty much knocked the music world on its ear with his innovative sounds and playing style back in the late ‘70s. For years he partnered with brands such as Kramer, Ernie Ball and Peavey to create signature models of his guitars, as well as the real guitars he used onstage. Now he has his own company: EVH.
POLISHING Once you have completed the wet sanding you wil have a pretty smooth surface that is almost a dull shine. You can either hand polish the finish or use a polising attachment to buff it out. Stew Mac has a polishing pad that attaches to you drill. Or you can get 6" foam bonnets from an auto parts store that will fit over the sanding disk attachment you may already have. It is best not to use any thing made from cotton because it will cut through the finish. Stew Mac also has polishing compounds that you will use in order working you way down to the swirl remover. It's on the expensive side so I use McGuires polish that you can get from the auto shop. If you use a buffing attachment make sure that you uae a different attachment for each grade of polish. Don't use the same pad for each one. Also remember to wait 10 minutes after buffing before you wipe off the surface. The lacquer gets hot and soft after buffing so give it time to cool. You will have to hand polish the cutaways, don't attempt to use the buffer on the edges of the guitar or cutaways because you will burn though the finish.

I was thinking about my personal favorite and it’s just too hard to choose only one. There are too many brilliant creations and all unique in their own way. I love the simplicity of “highway to hell”, the beautiful, mysterious, wah wah riff of “Voodoo child”, I have a weak spot for almost every guitar riff by John Frusciante or Slash and not to mention the zillion riffs that aren’t even on the list. Thank god it never stops.

JAZZ :Al Di Meola , John McLaughlin ,Wes Montgomery ,Pat Metheny ,John Scofield,Django Reinhardt ,Larry carlton ,Joe Pass,Herb Ellis ,Eddie Lang , and again I still have in mind at least 10 more jazz guitar players that jazz is the hardest and more complex guitar composition and it is an awesome style or kind of music to play just because not everybody play can play jazz.
Combo guitar amplifier cabinets and guitar speaker cabinets use several different designs, including the "open back" cabinet, the closed back cabinet (a sealed box), and, less commonly, bass reflex designs, which use a closed back with a vent or port cut into the cabinet.[26] With guitar amps, most "open back" amp cabinets are not fully open; part of the back is enclosed with panels. Combo guitar amp cabinets and standalone speaker cabinets are often made of plywood. Some are made of MDF or particle board—especially in low-budget models.[26] Cabinet size and depth, material types, assembly methods, type and thickness of the baffle material (the wood panel that holds the speaker), and the way the baffle attaches to the cabinet all affect tone.[26]
Gain is the strength of the electronic signal carrying your sound. A standalone gain booster is essentially just a preamp, and can be an effective way to overdrive the preamp section of your amp, creating easier musical-sounding breakup and increasing the amp's power. A gain booster in a stomp box lets you instantly boost your sound level for solos without altering your fundamental tone.

The Destroyer is an Ibanez brand electric guitar model (originally) manufactured at the FujiGen-Gakki musical instrument factory for the Hoshino-Gakki Company. The Destroyer model was first introduced by Hoshino-Gakki in 1975 and was based on the Gibson Musical Instruments' Explorer design. The Destroyer has since undergone several design and line changes and has been available in both 6-string and bass versions.
Higher strings can potentially induce some drawbacks that you will need to minimize. Before settling on your new action, you want to determine that strings don’t go out of tune in any fretting positions up and down the neck. You also need to ensure that using a capo, if you ever play with one, doesn’t throw all strings out of pitch too badly. Also note that if this experimentation results in raising your strings considerably from their previous position — and your guitar remains playable after doing so — you might also need to adjust your pickup height slightly. But, note that lowering the pickups further from the strings can often also help the strings to vibrate more freely (as discussed way back in Gibson Tone Tips #1), so leaving the pickups lower might be adding a double bonus to your new playing set up. Play with the options and see what works for you, and that will yield the “best right answer” for each individual player — and once you have achieved it for you, be sure to check and change your intonation, as necessary. If low action floats your boat, great, but it’s worth knowing that there’s a wealth of tone hiding in that thin slice of air between string and fingerboard.

{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop18":"skucondition|0||creationdate|1","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","prop17":"sort by","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] used"}


FYI, Dave might be backed up due to demand if he is still working, so I'd call those places up and ask them in advance. Twin Town isn't too bad a drive if you've got a car, maybe 15 minutes from Bloomington, but the place up in Fridley is about a 20-25 minute drive. They might be the best at working on short notice though as they're a smaller place. Definitely give them all calls.
This tonewood isn’t a very common wood used. But, when it is used on a solid-body guitar, you’re definitely going to have access to deeper, richer, and woodier tones. However, pair it with a Cedar top and you can have bright and warm overtones. Paired with a Spruce top, you can play to get an aggressive bite on the trebles with a definite presence on the low end.

An expander is the opposite of a compressor. It stretches out the dynamic range of your signal allowing the quietest sounds to be even quieter and the loudest sounds to be louder. This can be useful in situations where you want quieter noises—such as squeaky fingering sounds—to become inaudible in the mix where they don't attract attention, while your intentional tones soar to the top.
I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.
Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.
GuitarsJapan.com respects the intellectual rights and property of the owners, luthiers and salespeople at the Rickenbacker, Gretsch, Gibson and Fender Guitar Corporations. Registered trademarks/designs of these corporations include, but are not limited to, 325, 330, 360, Jetglo, Stratocaster, Flying V. GuitarsJapan.com is not affiliated with these corporations in any way. The guitars above represent instruments built in Japan for the Japanese domestic market only. They are no longer being made or distributed, which makes them rare. This page was created for collectors and enthusiasts; for the sole purpose of providing information, photo documentation and research tools.

Scott Baxendale has been building custom hand made guitars since 1974. Recently he settled in Athens Georgia where he is currently building custom guitars, restoring vintage guitars and teaching the art of lutherie to aspiring craftsman. Scott Baxendale’s legacy of building custom instruments began in 1974, when he arrived in Winfield, Kansas to work for […]


Merson emerges again as an importer in the late ’50s and early ’60s (as the guitar boom was building), marketing Giannini acoustic guitars made in Brazil and Hagstrom electric guitars made in Sweden. Recall that in the ’50s, the accordion craze had given great impetus to the success of music merchandisers. But by the end of the decade, the collapse of the fad left them holding the squeeze-box, as it were. After some meandering, the Folk Revival picked up at the end of the decade, creating a growing market for acoustic guitars. Hence the Gianninis.
The instruction covers both electric and acoustic guitars. The music part is thorough but progresses pretty quickly. It covers a few genres so that you can get the specific information you want whether you’re playing the blues or going classical. The best thing about it is that it is an all-in-one reference that even experienced players will appreciate.
The Effect: Volume pedals are a simple, yet frequently essential piece of equipment for many musicians out there. This device’s function is quite self-explanatory – it allows the user to control the level of the sound output, allowing them to increase or decrease the volume of the instrument. Additionally, many of these products can also operate as expression pedals, or a control for some of the other effects on your pedalboard. These gizmos are typically known for being strong and sturdy pieces of gear, as they should since they get stomped on quite a lot. If you are looking for a proven solution, go for the Boss FV-500H, if not, check out our Best Volume Pedal reviews to find your perfect match.
The pickups on this guitar are really cool and not found on any other model that I’ve seen.  They are really loud single coils reading out at 5.58k at the bridge, and 5.90k at the neck.  The pole piece screws even have some “gold foil” surrounding them, which is really cool and not usually seen.  These pickups sound very close to vintage American p90s, and they have this loud, articulate, sparkly clean tone combined with a really grindy dirty tone.  These pups are special, seriously!  Also, those switches were standard fare through the late 60s on most Matsumoku guitars.

Stompboxes are small plastic or metal chassis which usually lie on the floor or in a pedalboard to be operated by the user's feet. Pedals are often rectangle-shaped, but there are a range of other shapes (e.g., the circle-shaped Fuzz Face). Typical simple stompboxes have a single footswitch, one to three potentiometers ("pots" or "knobs") for controlling the effect, and a single LED that indicates if the effect is on. A typical distortion or overdrive pedal's three potentiometers, for example, control the level or intensity of the distortion effect, the tone of the effected signal and the volume (level) of the effected signal. Depending on the type of pedal, the potentiometers may control different parameters of the effect. For a chorus effect, for example, the knobs may control the depth and speed of the effect. Complex stompboxes may have multiple footswitches, many knobs, additional switches or buttons that are operated with the fingers, and an alphanumeric LED display that indicates the status of the effect with short acronyms (e.g., DIST for "distortion").[5][9] Some pedals have two knobs stacked on top of each other, enabling the unit to provide two knobs per single knob space.


This affordable signature model for Iron Maiden guitarist Adrian Smith is an exemplary classic metal guitar for the money. It features a Jackson slim D profile neck with immaculately finished frets, while the oiled maple neck a joy to motor around on. Allied to the surprisingly good build quality, this imparts a premium feel to the SDX. Tonally, the body might not quite enjoy the snap and sparkle of Smith's alder-bodied American original, but basswood is a great tonewood anyway, particularly once you're piling on the gain. The bridge humbucker is plenty powerful, with just enough detail to prevent it sliding into the woolly morass suffered by many lower-end units, and the single coils give you more than a sniff of Strat flavour, making the SDX a versatile guitar indeed considering its heavy metal association. The Floyd Rose Special bridge also does a solid job of keeping you in tune, no matter how crazy you get. A versatile guitar capable of covering many bases, and perfect for nailing your favourite Maiden tunes? What more could you need, bar the white high tops and tight strides?
If a love of flamenco and salsa music sung by the Gipsy Kings brought you to the best classical guitar, then you are going to want to read this review. The Cordoba company, as you can now see, has quite the reputation for quality guitars, and their GK Studio Negra left-handed model—a Gipsy Kings signature instrument—could easily be the right one for you (no pun intended).
On paper it looks fantastic for the money, but having Google'd it I found some people were less than happy with the fit & finish. But I value the opinions of my fellow MLP'ers a bit more than those found on some other forums so I'd like to hear what you all think. Aside from the electronics, which I'd replace, how is the quality of this instrument? Is it as good as the singlecut models?
Frets are positioned proportionally to scale length—the shorter the scale length, the closer the fret spacing. Opinions vary regarding the effect of scale length on tone and feel. Popular opinion holds that longer scale length contributes to greater amplitude. Reports of playing feel are greatly complicated by the many factors involved in this perception. String gauge and design, neck construction and relief, guitar setup, playing style and other factors contribute to the subjective impression of playability or feel.
×