I have many acoustic guitars in the collection including Gibson, Taylor, Fender and Washburn. That said none of these guitars come close to the richness in sound of a Maton. I'm assuming this is due to the quality of the Australian timbers and workmanship. Although a little expensive I highly recommend you at least play one in a shop as a treat and hope a dead relative leaves you some money to give you an opportunity of taking one home.
The National STEM Guitar Project, in partnership with NSF Advanced Technological Education (ATE) Centers with funding provided through a grant from The National Science Foundation (#1700531, #1304405, & #0903336), hosts innovative Guitar Building Institutes throughout the US. Five-day institutes, combined with additional instructional activities comprising 80 hours, provide middle, high school, and postsecondary faculty training on science, technology, engineering and math (STEM) applications as they relate to the guitar. The institutes present and teach participants hands-on, applied learning techniques to help engage students and spark excitement for learning STEM subject matter.

Then, one weekend his combo got the biggest gig of its career – opening for Tommy Dorsey and his orchestra. Charlie was hot that night, and Dorsey took notice. In one of those rare coincidences, Dorsey’s guitar player had just quit, and the next day Kaman was offered the job. Which path does the son of a construction foreman pursue? The uncertain, fleeting glory of the entertainment industry, or the unknown possibilities of putting craft in the air?
Certainly, the response to these innovative guitars at the time gave no indication. They tanked pretty quickly. No one has ever even seen a real Moderne, and players didn’t warm up to the Explorer and V until the 1970s. These models even inspired at least two new American brands – Hamer and Dean – both dedicated to making “improvements” on the Gibson originals. Japanese manufacturers also picked up on the appeal of these designs.
I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?
The kind of interface that you want should connect to your PC and the DAW (digital audio workstation) software installed on it so that you can record your playing. The Guitarport didn’t allow for recording without buying additional software that cost as much as the device; the device is essentially obsolete now but still supported. Years later I upgraded to their Toneport UX2, meant for recording and DAW compatibility. The accompanying Podfarm 2 software is quite good. The UX1 costs half as much with the same software if you don’t want or need 2 inputs (microphone or instrument). Presonus sells an interface that is quite popular, for less than $99
The one-string guitar is also known as the Unitar. Although rare, the one-string guitar is sometimes heard, particularly in Delta blues, where improvised folk instruments were popular in the 1930s and 1940s. Eddie "One String" Jones had some regional success.[citation needed] Mississippi blues musician Lonnie Pitchford played a similar, homemade instrument. In a more contemporary style, Little Willie Joe, the inventor of the Unitar, had a rhythm and blues instrumental hit in the 1950s with "Twitchy", recorded with the Rene Hall Orchestra.
Ovation guitars have a history of innovative design, reflecting its founder’s engineering training and development of Kaman helicopters. Ovation guitars have composite synthetic bowls; earlier acoustic guitars have had wooden sides abutting a flat back since the 1700s. Kaman diagnosed structural weaknesses in the orthogonal joining of the sides, and felt that a composite material could be used for a smooth designed body. Ovation’s parabolic bowls dramatically reduced feed-back, allowing greater amplification of acoustic guitars. Improved synthetics used techniques from helicopter engineering to control vibrations in the bowl. Ovation has developed a thin neck, with the feel of an electric-guitar’s neck, but with additional strength from layers of mahogany and maple reinforced by a steel rod in an aluminum channel.[1] The composite materials and thin necks reduced the weight of Ovations.

Also new in ’66 was the SM series, a variation on the E-100 and ET-100 introduced in the previous year, very similar to the Ks except the cutaway horns were flared outward in the classic Teisco “tulip” shape which would dominate later in the decade. These had fairly flat rectangular chrome-covered pickups, with a rectangular indentation stamped in the center and six flat round poles, plus to long half-slots along both outer edges. The SM-2L (Teisco Del Rey ET-210) had the hooked headstock, small striped metal pickguard along the lower body, two on/off sliders, volume, tone, roller bridge and Bigsby-style vibrato. The SM-2L retained the German carve relief of the K series. A plain-Jane SM-2 (Teisco Del Rey ET-200) followed, sans German carve, and with a bridge/tailpiece assembly. The SM-1 (Teisco Del Rey ET-110) had just a neck pickup with volume and tone controls, bridge/tailpiece assembly, no German carve or striped metal pickguard, and the Strat-style head of the previous ET-100.

Juszkiewicz, 64, is known for being temperamental, ultracompetitive and difficult to work for. A former Gibson staffer recalls a company retreat in Las Vegas punctuated by a trip to a shooting range, where executives shot up a Fender Stratocaster. In recent years, Juszkiewicz has made two major pushes, both seemingly aimed at expanding a company when a product itself — the guitar — has shown a limited ability to grow its market.
Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]
My first guitar, bought out of an advert in Kerrang over 20 years ago. I think it was branded "Axe" and it had absolutely nothing good about it. Some sort of MDF body, horribly bowed neck (couldn't be adjusted as the truss rod was broken), high frets everywhere (you could pull them out with your fingernails, fortunately), slipping tuners, hopeless bridge, hopeless nut, everything. Nearly put me off playing before I'd got started.
StepFilter ('Filter' category): I'm a huge fan of Roger Linn's AdrenaLinn processor. When I play with groups like Air Liquide, it's the only gear I take other than the guitar, and of course a MIDI cable to sync it from the band's MIDI master clock. You can get many of the same effects from Cubase's StepFilter.The StepFilter offers synchronised filter effects that recall Roger Linn's AdrenaLinn signal processor. StepFilter is basically a tempo‑sync'ed dual step‑sequencer, each with 16 steps, and there's a total of eight patterns. One sequencer controls filter cutoff and the other resonance. The filter response morphs from low‑pass to high‑pass, with a stop along the way for band‑pass. You can also copy a pattern, paste it into a different pattern, and create variations. All of these parameters, including pattern selection, can be used with VST host automation control. If you're into electronic guitar effects, you really should check this out — but also try the Tranceformer ('Modulation' category) and Chopper ('Other' category), which are similar, although Chopper works on amplitude, and Tranceformer syncs a ring modulator's carrier frequency to the project tempo'

One of the oldest guitar effects, vibrato changes the pitch of the signal at a constant shifting rate. Vibrato adds motion to your tone, but without the “choppy” feel of a tremolo. Vibrato adds a more fluid movement. The slightly detuned, slightly chorus-ey modulation emphasizes bends and makes chords more interesting to the listener. Jimi Hendrix was a visionary user of the Uni-Vibe, which at its core is a vibrato pedal.

OK, so you're ready to try your hand at the electric guitar, but where do you start? A good place to start is with an electric guitar that's specifically geared toward beginners. And although many guitars cost over $1,000, there's no need to shell out that much dough for a student model/novice instrument. To help you sort through all the options, we put together a list of the best beginner electric guitars worth buying right now. So whether you’re looking to become a shredding metalhead, a cool jazz player or an all-American country star, one of these electric guitars will have you well on your way.
INSTALL "UNDER SADDLE" PICK UP - $100.00 and up. Expand endpin hole to accommodate jack. Wire pickup to pre-amp and jack. Fit and re-size old saddle for proper action and contact with pickup. May require new saddle and re-rout of saddle slot(additional). There are other variables relating to pre-amps which must be individually quoted. Condition of bridge and neck angle may be factors in the appropriateness of an under the saddle pickup.
As you will note in the earliest catalogs, Ibanez guitars were first "copies" or "reproductions" of guitar models originated by several American guitar manufacturers and manufacturers from other countries. They were not forgeries, as they were never sold with misleading logos or with the intent to deceive. Ibanez models replicated such styles as the Gibson Les Paul, Fender Stratocaster and Telecaster, Rickkenbacker styles, and others. Due to their high quality, Ibanez guitars and those made under other brands, such as Greco and Aria, quickly earned a reputation around the world as quality instruments at a great value. There is a form of urban legend that circulates in the guitar community that has many variations, but usually involves either Gibson or Fender suing Ibanez, Aria, or some other Japanese manufacturer, with the intent to stop that company from manufacturing superior copies. The truth is less glamourous. Only one company ever sued another, and it was Norlin (the owner of the Gibson brand at the time) suing Hoshino (owner of the Ibanez brand) and the suit was focused only on the "open book" headstock shape common to Gibson guitars and replicated on the Ibanez guitars. The suit was brought in 1977, but by then Ibanez had already changed the headstock shape on its copy models, so the suit was settled out of court. No other company was ever sued by any other company. However, this episode has given rise to the term "lawsuit" guitar, which is used to describe any Japanese copy guitar made in the shape of an American manufacturer's model.
{"id": "H99039", "skuOrProductId": "H99039", "categoryId":"site1AAG", "name":"DT520 Destroyer Series Electric Guitar", "pageUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/NonExistingImage-00-120x120.jpg", "addToCartUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.

Since it was originally introduced in 1975, the Destroyer has become an icon of that era's chapter in rock n' roll history. Over the years it has undergone many incarnations and the perennial classic returns once again. The body and neck of both guitars are made of a tight Mahogany for maximum resonance. The bound rosewood fingerboard is adorned with Jumbo frets. The Destroyer also features Sure Grip III control knobs for no-slip control. It's not called the Destroyer for nothing.", "value":"447.99", "priceMin":"447.99", "priceMax":"699.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"3", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}

While it was produced, Ovation’s super-shallow 1867 Legend was the recommended guitar in Robert Fripp‘s Guitar Craft.[22][23] Tamm (1990) wrote that the acoustic 1867 Legend has “a gently rounded super-shallow body design that may be about as close to the shape and depth of an electric guitar as is possible without an intolerable loss of tone quality. Fripp liked the way the Ovation 1867 fitted against his body, which made it possible for him to assume the right-arm picking position he had developed using electric guitars over the years; on deeper-bodied guitars, the Frippian arm position is impossible without uncomfortable contortions”.[22]
Time to turn our attention back to the guitars themselves. The following are some of the better low-cost electric guitars available on the market today; refer to an anatomy of electric guitars to see definitions of guitar pieces and places. When you're deciding, go to a store and try them out for heft, comfort, stability, sound quality, and appearance. Shop around, comparing, for instance, online prices against local store prices. This is an investment, so choose wisely.
It’s not known how long this A group lasted – probably only a couple more years, except for the U-65RN. By ’76, the U-65RN was still around, now promoted with 17 watts, Hammond reverb, tremolo, 10 transistors, and a 12″ heavy duty speaker. This looked pretty much the same, except the logo was reversed in white out of a black metal strip above the grille and the power switch had changed. At some point, the U-65RN was joined by the UB-252 bass amp, offering 20 watts with a 15″ speaker, presumably similar and transistor. These are the only two Univox amps listed in a 1979 price list (contained in the 1980 book), though, as you see over and over, others may still have been available.

Every skilled worker needs to look after their tools and musicians are no exception. Sure, wear and tear is normal—especially when you play your instrument often—but a little T.L.C. will ensure your musical gear continues to look, play and sound amazing for years. At Guitar Center Repairs, you'll find a dedicated team of certified musicians who take pride in helping you reach your highest level of playing potential. Make no mistake, your music maker is in the best of hands at GC Repairs. When it comes to looking after your musical equipment, certain things should be left to professionals—pickup installation, wiring customization and structural repair, to name a few. Mind you, there are tasks that every guitarist can take care of at home, including regular polishing and restringing. Of course, not everyone has the time to continually look after their instrument and bringing it to Guitar Center is a great way to save yourself time and ensure that the job gets done right. With that being said, GC's services go well beyond cleaning and string changing. For those of you who own a stringed instrument and find the action is higher than it once was, a truss rod adjustment is definitely in order. Or, maybe you want to personalize the look and sound of your guitar—in which case, an expert will be more than happy to swipe out your pickups for a new set, replace the pickguard or perform any other task to give you an axe that’s entirely your own. Honestly, your best bet is to browse this entire section and see what else is offered in the way of repairs, maintenance and modifications. Who knows, maybe your local GC is having a free guitar setup day, so feel free to have a look around this page or take a swing by the store in your area. Our friendly and knowledgeable staff is always happy to speak with other local musicians and setting up a quick appointment for your instrument will do wonders for your musical enjoyment. From nut and bridge replacements to even amp electronic upgrades, Guitar Center Repairs has you covered.

Maton was founded in 1946 as the Maton Musical Instruments Company by Bill May and his brother Reg. Reg was a wood machinist, and Bill a jazz musician, woodwork teacher andluthier who had for some years operated a custom guitar building and repair business under the name Maton Stringed Instruments and Repairs. The name “Maton” came from the words “May Tone” and is pronounced May Tonne.

The #1 cause of fret wear is the fretting hand pressure exerted by the player.  I have some clients that grip very tightly and wear frets quickly (Rob Fahey), and some that grip very lightly and take forever to exhibit significant wear (Jasan Stepp, Dog Fashion Disco/PolkaDot Cadaver).  Fret material hardness, string hardness and frequency of use all contribute to wear as well, but hand pressure is still the leading cause since frets do not wear themselves out.  Technique is different for every player, unique and personal and habits can be hard to change.  Just like brakes in a car, how hard and how much something is driven directly impacts wear and longevity.  Please see the refrets page for further thoughts on this topic.
As such, a velocity-sensitive MIDI keyboard is a must here, and the more experience you have with string instruments, the more you will get out of this VST. It's knowing things like how the string all have different weight and tension behind them and how the volume changes when a plectrum thwacks against the strings that will give guitarists the edge here.
When two or more speakers are used in the same cabinet, or when two cabinets are used together, the speakers can be wired in parallel or in series, or in a combination of the two (e.g., two 2x10" cabinets, with the two speakers wired in series, can be connected together in parallel). Whether speakers are wired in parallel or in series affects the impedance of the system. Two 8 ohm speakers wired in parallel have 4 ohm impedance. Guitarists who connect multiple cabinets to an amplifier must consider the amp's minimum impedance. Parallel vs. series also affects tone and sound. Speakers wired in parallel slightly dampen[s] and restrain[s] them, giving what some describe as "tighter response" and "smoother breakup". Some describe speakers wired in series (usually no more than two) as sounding "...looser, giving a slightly more raw, open and edgy sound."[26]
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
If you can’t commit hours of your time to tracking down the right electric guitar amp, we listed here a number of good ones that are varied enough to fulfill most requirements. Among these, we found the Vox Pathfinder 10 Denim to make a great choice for those that are just getting into playing guitar or who just need a good, inexpensive practice amp. It’s solid-state, so you won’t have to blow your money on replacing lamps and this will also make it easier to tweak its voice to whatever tune you want to try out. Folks who use it appreciate that resembles the overdrive on a lamp amp pretty well and at 10 W of power it can be used from a garage without any complaints from the neighbors. If this isn’t available, The Blackstar IDCORE10 will offer similar quality and even more of a possibility to play around with sound effects.
A common format of bass amplifier–the "combo" amp–contains the amplifier electronics and one or more speakers in a single wooden cabinet. Combo amps have been used by musicians since the 1920s, as they are convenient for transporting to rehearsals and for performances at small to mid-size venues. Combo amps range from small, low-powered "practice amps" used for individual practice, to mid- and large-size and more powerful combo amps which produce enough volume for rehearsals and small to mid-size venues (e.g., nightclubs). For larger venues, such as stadiums, bassists may use the "bass stack" approach, in which one or more separate speaker cabinets, each with one or more speakers (but not containing an amplifier) and a separate "head" containing the amplifier electronics are used. With a large "bass stack", a bassist can obtain a much higher wattage and onstage volume than a "combo" amp could provide. As with an electric guitar amp, a bass amp is not simply used to make the instrument louder; performers use the preamplifier and equalizer controls and, particularly in amps from the 1980s and 1990s onward, the onboard electronic effects, to create their preferred tone.
Paramount: Around 1930 Martin made about 36 guitars with strange construction. A style 2 size body mounted into a larger rim and back of rosewood, small round soundholes around a "lip" that joins the outer rims to the inner rims, no soundhole in the top, 14 frets clear, dot fingerboard inlays to the 15th fret, rounded peak peghead with standard Paramount banjo peghead inlay, banjo-style tuners, four or six strings.
If you just want one or two instruments from a large SoundFont then follow this procedure.  Open the large multi-instrument SoundFont in Polyphone, then select File, New, Name the new SoundFont.  Go to the Presets of the original SoundFont, Left-Click the Preset you want and then holding down the Left mouse button then drag it to the Presets of the new SoundFont and let go of the button (the preset is now inside your new SoundFont).  Right-Click on the main heading of the original SoundFont and choose Close File.  Now simply choose File, Save (or Save As), Close.
Taylor also has a Build-To-Order program that allows anyone to design their very own guitar. There’s an extensive menu of guitar options starting from tonewoods, including species and grades that aren’t offered through Taylor’s standard line; inlay, binding and purfling options; finish options such as solid colors, sunburst, or vintage finishes; wood accents like a backstrap, armrest or truss rod cover; neck options such as scale length and neck profiles; and finally body shapes including the deep-body Dreadnought and the new Grand Orchestra.
{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
Rule 1—There are no rules. The sound you’re after might not be made by what we could call the appropriate or logical signal path, but that’s not always the issue. The issue is this: what does it sound like? If it makes the sound you’re after, then it’s right…although, you may have to do something about the noise. Traditional pedal board arrangements were designed for certain reasons, and keeping the noise down is one biggie. Following the principles of how sound is made in physical space is another (see Rule 4 coming up). But the final choice is yours. As a very wise man said: if it works, don’t fix it.
Soft and soulful is the second name of Fender guitars and basses. They are famous for their fruitful and enchanting tone. It is one of the most recognized brands in the world. Every note that is played on this guitar is pleasant and pure. There are two factors that contribute to such a thrilling tone. Firstly, the majestic shape of the 'strat' in resonating wood and secondly, the perfect configuration of three pick ups. The pick ups are usually singe coiled. However, there are cases where double coiled third pick ups have been used. Fender is a very popular guitar brand, and artists like Eric Clapton who plays extremely soft music, and heavy metal bands such as Iron Maiden have also used the same brand. Models like Stratocaster and Telecaster have etched their names among the greatest guitars ever made. Fender offers myriad of designs, styles, and configurations. If you are a beginner, then go for any Fender model, it's probably the best guitar for novices or amateurs.
Some effects, such as flanger, wah-wah, and delay, are obvious to the ear. But others, such as compression, reverb, and even distortion, are core elements of your tone, so you might not always notice these as “effects.” But used artfully, or sometimes even just correctly, they can take you to tonal utopia. Even if your personal style doesn’t call for mind-altering sound, you can still improve your sound by using effects.

Like 39% of the people said, they are simply the worst. The first guitar I owned was the Ibanez Gio, I thought it was amazing. I play it every now and then, but not too much anymore. For its price, I think it is the best starter guitar, 10 times better than any first act. I owned a first act, it was the worst guitar of all time. Me finger killed after playing it because the strings are so hard to push down, the frets don't even stay attached to the guitar. All beginner guitarist, don't get first act.
If you’re looking for a solid start on how you will sound without settling for a tube amplifier due to its price, maintenance and back breaking weight to carry around. The Marshall MG30FX combo amp is surely one of the best out there on capturing iconic sounds, as well as the legendary Marshall tones that other brand of amplifiers frequently emulates, adding it to their bank of amp models.
I play a Breedlove and it compares very favorably with Martin, Taylor, and Gibson while I prefer it to Fender acoustic guitars (I think Fender electrics are much better). Beautiful tone, and in one place where I play I'm not allowed to plug in. At that place, my Breedlove is the only one of my guitars I can get sufficient volume from. My other guitars are a Martin, an Ibanez, and a Schechter. Breedlove should be in the top ten.
Let me shoot you some names Mr Pro Guitar player. When those you mention can play with the likes of Jack Pearson you can put them on a list. You didn’t even touch on country or bluegrass so I have to assume you know nothing about them. So let me throw this out there. There is only ONE called Mr. Guitar. Chet Atkins. His protege, Jerry Reed is another great. Let’s try Merle Travis, Jody Maphis and in recent years Redd Volkaert. I think you need to expand your listening radius. Let’s not forget the man who likely has his name on your guitar, Mr. Les Paul. Then I would ask you listen to bluegrass flatpicking. You want speed? These guys can play with Ygnwgie and do it on a Martin D28.
To preserve the clarity of the tone, it is most common to put compression, wah and overdrive pedals at the start of the chain, modulation (chorus, flanger, phase shifter) in the middle, and time-based units (delay, echo, reverb) at the end. When using many effects, unwanted noise and hum can be introduced into the guitar’s sound. Some performers use a noise gate or noise suppression pedal at the beginning or end of a chain to reduce unwanted noise and hum.
These are the settings I use as my basic rack for adding rock guitar sounds in Cubase, and you might also find it handy as a point of departure, so it's worth saving as a track preset. To do this, right‑click in the audio track containing the 'rack', and choose 'Create Track Preset' from the context menu. When the Save Track Preset dialogue box appears, simply name it and save it: now you can call up your rack for any audio track in any Cubase project!
Several producers like to create larger-than-life recorded sounds by splitting the guitarist's instrument signal to several different amps, which are then recorded simultaneously. Joe Barresi is a devotee of this tactic, and uses a dedicated guitar splitter box, such as the Little Labs PCP Instrument Distro or Systematic Systems Guitar Splitter, for the purpose. "In choosing the amplifiers and speakers, it's important to remember that larger speakers give a more compact, tighter sound. A tiny amp turned all the way up will give a more blown-out sound."
Vox's history goes back to the late '40s, where they originally built electronic keyboards. Their presence in the guitar market started in the late '50s when they launched the 15-Watt AC15 amplifier which ultimately caught the attention of many iconic artists - including The Beatles, Queen, Dire Straits, The Yardbirds, The Rolling Stones, The Kinks and many more. These artists helped spread the brand's popularity around the world, but ironically, they were not enough to make the company profitable. This resulted in the Vox brand being owned by many different companies, thankfully Korg took over in 1990 and continues to take good care of the brand up to this day. These days, Vox is still the go-to amp for chimey and jangly clean tones with an extensive line up of amplifiers, interestingly, their line up still includes modern reproductions of their popular AC15 and AC30 combos.
Yet, there’s still a lot to like about the JS140. First, the use of solid basswood for the body of the guitar is a plus, despite the fact that basswood is plentiful and affordable. While it’s typically used in economy guitars (like this one) its tone is quite good, providing a thick low end with a punchy mid range. As tonewoods go, it’s a decent compromise.

Another negative I found was that this book focuses more on traditional music notation, and places guitar tablature into the background. As a guitar teacher, I believe that tabs are the next best thing to sliced bread, since it makes learning soooo much easier for beginner guitarists. And since learning the guitar is hard, anything that makes it simpler is more than welcome. On the other hand, if you want to learn to read standard music notation, this will be the way to go for you.

During the late 1930s and through the 1940s—the heyday of big band jazz and swing music—the guitar was an important rhythm section instrument. Some guitarists, such as Freddie Green of Count Basie’s band, developed a guitar-specific style of accompaniment. Few of the big bands, however, featured amplified guitar solos, which were done instead in the small combo context. The most important jazz guitar soloists of this period included the Manouche virtuoso Django Reinhardt, Oscar Moore who was featured with Nat “King” Cole’s trio, and Charlie Christian of Benny Goodman's band and sextet, who was a major influence despite his early death at 25.
Electric basses tend to use a medium jumbo fret as most Fenders have thru the years.  There are some folks who like the medium or even the very narrow/small mandolin fretwire for basses – this is more of a vintage feel, like the earliest Fender basses (Fender created the Precision Bass in 1951).  Since string height for bass strings is higher due to gauge and tuning, they are easy to grip and many bassists do not seem as concerned about fret height as guitarists.

The guitar is also available in various packages with an amp and other accessories, such as this one that includes a Fender Frontman 10G amp, a cable, a strap, picks, and a tuner. Note, though, that Fender offers a truly awesome little amp with built-in effects, the Champion 20, for just a bit more. We strongly recommend spending a little extra and getting a Champion 20, which will give almost any guitarist practically any sound they can imagine with no need for effects pedals. Read more about the Champion 20 in our review of the best electric guitar amp for beginners.
So where do you start in a section as massive as this one? From acoustic to electric, nylon to steel stringed, hollow body to solid body, all styles are represented here, so having a good idea of what you're looking for will definitely help. The best place to start is usually with the brand, as each one has a reputation for something different, allowing you to narrow things down from there. For example, you'll instantly recognize names like Fender, Gibson and Ibanez as trailblazers of the electric guitar, while others like Martin, Taylor, and Breedlove are more famous for the unparalleled quality of their acoustic instruments. After that, you'll want to look at things like body type, tonewood, strings, size, orientation and performance level. Once you have a general idea about each of these, your decision gets that much easier. Just remember, it all comes down to personal preference, so as long as you're happy with the guitar you choose you can't go wrong. The guitar is a special instrument, with a different meaning to every player. Whether you're taking your first steps into the world of music or you're a professional rocking out in front of sold out stadiums all over the planet, strumming, plucking and picking on a guitar is a way to express yourself that can't be duplicated with anything else. So pick up a guitar here and start playing... you'll be glad you did.

The reason why you would want to have one of these on your pedalboard is simple. An EQ pedal allows you to adjust a variety of frequency bands and shape your tone based on your own requirements. As you evolve your skill and knowledge, you will soon realize that you can’t play without a pedal of this type. When it comes to some notable models, Empress ParaEQ comes to mind as the best choice.
No, you’re right. The more I think about it, the more I see the attraction. Plus, I was wrong in my previous comment when I said the sides would sound the same up to the limit of the smaller cap. Because I think they’re be audible resonance differences between the two values. It’s the same reason why the scheme I’m discussing differs from a standard tone control. And I sound vague, it’s ’cause I am! One reason I’m eager to explore this …

{ "items": 1, "margin": 0, "loop":true, "dots":true, "lazyLoad":true, "autoplayHoverPause":true, "navElement": "div", "nav": false, "itemElement": "li", "stageElement": "ul" //"jqueryLazyLoad": true, //"jqueryLazyLoadOptions": { "effect": "fadeIn", "skip_invisible": false, "threshold": 300 }, //"autoplayHoverPause":true, //"responsive":{ "0":{ "items":5 }, "1158":{ "items":6 }, "1340":{ "items":7 }, "1500":{ "items":8 } } }