Chris Broderick (b. 1970) is the lead guitarist for Megadeth, formerly of Jag Panzer and Nevermore. His main guitar was a 7-string RG model. During the recording of Endgame, he started using 6-string Ibanez S series guitars, which are painted with artwork from various Megadeth albums. This is because Dave Mustaine didn't want Broderick to use his 7-strings in the studio. He has since switched to Jackson Guitars.
Unlike the piano, the guitar has the same notes on different strings. Consequently, guitar players often double notes in chord, so increasing the volume of sound. Doubled notes also changes the chordal timbre: Having different "string widths, tensions and tunings, the doubled notes reinforce each other, like the doubled strings of a twelve-string guitar add chorusing and depth".[38] Notes can be doubled at identical pitches or in different octaves. For triadic chords, doubling the third interval, which is either a major third or a minor third, clarifies whether the chord is major or minor.[39]

The Sex Pistols, Steve Jones' brutish power chords and flamboyant gutter-glam solos were a perfect mirror for the taunting bile of Johnny Rotten – and a yardstick for every punk-rock noise-maker that followed. His legacy was set with indelible riffs on one record – 1977's Never Mind the Bollocks… – that inspired guitarists from Slash to Billie Joe Armstrong. It was an attitude as much as a sound. As Jones told a journalist during his days with the Sex Pistols, "Actually, we're not into music. We're into chaos."
Here are the reasons why you MIGHT want to raise it: 1. The break angle (the angle change of the strings as they pass over the saddles) is so severe that the strings keep breaking as they pass over the bridge. 2. The break angle is so steep that the strings hit the edge of the bridge before they go over the saddles. I’ve never had a problem with 1 above. However, 2 often happens and it’s not something that bothers me unless it’s severe.

Congratulations on buying yourself a top-notch axe — but you’re not ready to shred just yet. A good guitar also requires the right amp to achieve the right sound. Amps can be a daunting purchase (you certainly won’t be starved for choices on the beginner and enthusiast side of the price spectrum) and there are a lot of qualities that need to be taken into account. Want a low-cost amp that’s durable? Shoot for a solid-state amp. Want better sound? We suggest an all-tube amp instead. Want the most tonal variety on a budget? A modeling amp will get you all kinds of sounds without requiring a fleshed-out pedal board. But at any rate, no matter what you’re looking for in an amplifier, these 10 picks cover all the fundamental bases. So purchase, plug in and let’s rip.
A selection of makers within the high-end, hand-built crowd of today do offer variations on the opamp-based template discussed above. Blackstone Appliances bases its Mosfet Overdrive on a discrete transistorized circuit centered around, yes, mosfets, and Klon’s Centaur pedal uses… well, who the hell knows? They cover the entire circuit board in epoxy goop to keep the cloners at bay, but this expensive overdrive certainly sounds different. Other popular boutique overdrives are found in the Barber Electronics LTD pedal, the Crowther Audio Hot Cake, and the Fulltone OCD.
GUITAR RIG 5 PLAYER is the free, modular and expandable effects processor from Native Instruments, combining creative effects routing possibilities with ease-of-use and pristine sound quality. The included FACTORY SELECTION library provides one stunning amp with 17 cabinet emulations, plus 13 effects and sound modifiers to shape and enhance any audio signal.
Based on the popular Les Paul Jr, the Saga LJ-10 DIY electric guitar kit follows after its streamlined aesthetics and electronics. It comes with the popular LP style body, crafted from basswood and pre-drilled for complete assembly. It has a bolt-on neck that you have to screw into the body, and a headstock that you can carve into your preferred shape.
Boss’ CE-1 Chorus Ensemble was the first of these types commercially available, and is the best remembered of the company’s now-archaic looking early range of die-cast metal pedals. The unit was an instant success when it hit the market in 1976, and was quickly snatched up by a range of major players. Andy Summers used the CE-1 with the Police in the late 1970s and early 1980s, and it’s probably most famously heard on the band’s big 1979 hit “Message In A Bottle,” though others made creative use of it too. Shortly after the Boss, Electro-Harmonix offered both its Memory Man Stereo Echo/Chorus—which featured a very good, spacious chorus setting that a lot of player’s loved—and smaller, stand-alone Small Clone chorus. Like the Small Stone phaser before it, the Small Clone had a softer, subtler sound than many of the chorus pedals that would soon flood the market, and it too was a huge hit. Kurt Cobain’s use of the pedal on “Smells Like Teen Spirit” and Chris Novoselic’s bass part on “Come As You Are” from Nirvana’s Nevermind album shows off how it can add a rich, moving, liquid texture to both clean and distorted parts. MXR, DOD and Ibanez all offered popular early IC-based analog chorus pedals, and today every major mass-manufacturer has a unit on the market. 

The world is full of amps. It is so full of them in fact that it is somehow hard to choose not because there is not enough good ones, but too many of them. Which is very unfortunate, as it raises the entry level requirement for understanding what you are buying. This means that a whole lot of people get intimidated when trying to pick an amp. Like if they want a mini amp that they would want to carry with them when they go somewhere. Which is why I sat myself down the other day, bargaining all the while, and compiled a list of the best small guitar amps, for the sake of all the big musicians trying to play them. Hopefully at least some of you will find it more or less useful, since I had to categorize these according to price, sound quality, tone quality, comfort of use and even the general usefulness. What I am trying to say is, it was a lot of work.
The palm mute is a playing technique for guitar and bass guitar, executed by placing the side of the picking hand below the little finger across the strings to be plucked, very close to the bridge, and then plucking the strings while the damping is in effect. This produces a muted sound. It was popularized by Black Sabbath in the song "Paranoid". - winner333
The Orange Crush is all about style and portability. It’s distictive look is due to the Orange basket weave Tolex, woven speaker grille, beading and legendary hieroglyphs (PiX) and of course the Orange signature ‘picture frame’ edging. It’s not as feature rich as other models, but that’s the point. It’s simple, portable and just a good basic combo amp. It’s also available in black (why?) and retails for around $99.
Why the Ultra Hard Bodies flopped is a mystery, since they certainly fit with the superstrat rage of the times, but they hung around for only a year or so. According to Walter Carter, Ovation briefly contracted for a shipment of solidbodies made by a Japanese manufacturer. No information is available about these, but it doesn’t really matter since only one carton of 100 or so guitars ever came in. If you find an animal that doesn’t fit the descriptions here, take a picture and let us know about it.

Overdrive – A dynamic effect that sounds like your guitar tone is being played through an amp breaking up. Overdrives are more subtle than distortion effects. To achieve the original overdrive effect, a valve or vacuum tube amplifier would be “overdriven” by increasing the gain to the limits of the tubes. At this point, the vacuum tube can’t handle the voltage, starts “breaking up”, and adding extra overtones to the signal giving the sound distortion.
You have to admire a YouTube channel and accompanying website that’s taken one guy on his own over fifteen years to build and offers hundreds of different lessons at all the various levels. The great thing about Justin is he gives off a cool, enthusiastic vibe all the time whether he’s teaching a basic chord for beginners or taking seasoned players through a complex solo.
This D-15M dreadnought features a solid 'genuine' (South American) mahogany top over A-Frame X bracing; the same material is used for the back, sides and neck. The neck profile is a 'modified low oval', and it's hard to imagine anyone having a problem with it. Bone nut and saddle: check. Vintage-style, open-gear tuners check. Super-thin matt nitrocellulose finish all over: check. Tonally, there is a rich and projecting core sound that's complemented by the unmistakable, Martin D-resonance. It's vibrant and ebullient, yet not brash; warm and full without being thick or indistinct. It puts every single cent of its build budget into making the best sounding and playing instrument, with very little concession to cosmetics, electronics or anything else. Solid woods, improved neck joint, bone nut and saddle, no frills whatsoever, save for the 'burst – it's unreservedly recommended.
It's amazing how this relatively new company, which officially started in 2007, is now playing with the big boys. Blackstar has a pretty straightforward claim to fame, and that is to provide premium quality high-gain tone in the price ranges that they enter into. And judging from the very positive response of rockers and metal heads, they are doing their job really well. As usual, artist endorsements play a big role, and Blackstar has big name backers like Neal Schon from Journey, Richie Sambora, Ted Nugent and Sammy Hagar to name a few, along with a long list of up and coming guitarists from rock and metal bands. While they still excel in providing high-gain tones, Blackstar amps also offer versatile overdrive and distortion flavors, thanks to the company's innovative ISF (Infinite Shape Feature) technology, which lets you change the tone of your amp from American to UK flavors with just one knob.

Today’s beginner guitars are far superior to the hunk of wood with strings I started with, and now there is a huge array of instruments to choose from. In fact, I’d go so far as to say if you only intend to play guitar for fun you’ll never need to spend another dime on gear beyond your starter setup, if you don’t want to. (Except for things like strings and picks, of course.) That definitely wasn’t true thirty years ago.

It’s ironic that Leo Fender, the creator of the most influential instrument in rock music, wasn’t actually a fan of rock ’n’ roll; he preferred country and western. But it goes to show you that once something new is out there, you can’t stop makers and players from reinventing it, adapting it for new purposes, taking it apart and putting it back together in new ways. The electric guitar is a prime example of unintended consequences. Initially, it just wanted to be a bit louder, but it ended up taking over and reinventing popular music and culture. Will we even recognize the sound of the electric guitar 10 or 20 years from now? I, for one, hope not.

The exciting thing about the Kemper is that you can use it to capture the sound of your JTM45, right where it hits that sweet spot, with the microphone you prefer and that mic preamp that just adds a certain something. Then you can refine the 'profile' you've made while A/B-ing the digital signal with the original using the Kemper's onboard EQ, and save the sound alongside the library of 200 or so profiles that comes pre-loaded, with access to hundreds more via the Rig Exchange section of the Kemper website. If you fancy a little more spice you can clean up or crank the KPA's onboard gain control to go way beyond the level of drive available on your original amp, adjust sag, tweak the audible effects of pick attack and even, thanks to what Kemper claims is "digital alchemy", alter the size of your virtual cabinet from a huge stack right down to a cigarette packet, while there's also a fully loaded set of effects. We've heard various approaches to digital modelling sound good in the studio before but this is as close to a 'real' mic'd valve amp sound as to be indistinguishable. If you're the type of guitarist who records regularly, or a producer who wants 24/7 access to a personal library of refined and tested guitar sounds wherever you happen to be on the planet at any given time, the Kemper Profiling Amp is the product of the decade so far.
Under the ’38 Avalon Hawaiian was a Supro Electric Hawaiian Guitar. This had a similar shape but was covered in “radiant crystal silver.” This was not pearloid, as is often assumed, but rather a silver paint (possibly a Duco leftover from the aluminum steels) with a crystalline additive similar to that used on Duolian finishes. The head was slightly rounded. The fingerboard was black. A handrest covered the pickup/tailpiece assembly. One volume control sat on a square plate on the treble side, reminiscent of the previously mentioned Supro Hawaiian Model in the ’38 Sorkin and ’39 Grossman books. This cost $30.

Moving the mic even further back – from a few feet to several – gets into what is generally referred to as “ambient miking” or “room miking.” This can be a great way to achieve even more depth and sense of space in your tracks. Jimmy Page made frequent use of ambient miking in recording his guitar parts with Led Zeppelin, and it was also a major factor in Eric Clapton’s legendary “Beano” tone. The further from the speaker you place the mic, and the more into the center or far side of the room, the great the proportion of reflected to direct sound in the blend, and the greater the sense of “air” and “room” in the sound. Often, it’s combined with a close mic to retain the option of blending in as much punch and directness as necessary, but if you only have one track or one mic available, ambient placement will sometimes do the trick on its own.
Many musicians find it helpful to be able to plug in and amplify their acoustic guitar. So, how does an acoustic-electric guitar work? These guitars boast the addition of a pickup system inside the body that turns the vibrations of the soundboard into electronic signals. These signals can be weak, so most acoustic-electric guitars use a preamp to make them stronger.
The people at VOX know a thing or two about creating great sounding amps, after all the AC30 is probably one of the most famous amps of all time. The VOX Valvetronix VT40X modelling guitar amp actually recreates the sound of these great amplifiers and so many more. In fact, you have 11 famous amps to choose from which can expand to 20 when using the included Tone Room Editor as well as 13 effects built in. The hybrid digital/analog power amp provides you with all the warmth of a tube amp but with digital stability! If you want more power, you have the VOX VT100x or the smaller version – the VOX VT20X.

Let me tell you about the vintage look at why it is favored among so many musicians and aestheticians around the world. Well, I won’t be able to tell you much about the vintage look in this short text, but what I can tell you is the fact that some of the best looking items out there, and best sounding, are entirely vintage. Well the Vox MINI3G2CL Battery Powered Modeling Amp is one of the vintage looking but entirely modern technology employing amps that produce a great sound while looking positively scrumptious. This small amp avoids the problem of weak low tones that so many other amp have by incorporating a bass boost technology into its construction. As a result we get a small, portable amp with a handsome look and an incredibly well rounded sound, with expressive lows and expressive high both present. And the price point relative to some of the other options on this list makes it a required purchase, unless something else catches your eye that is.
One of the oldest guitar effects, vibrato changes the pitch of the signal at a constant shifting rate. Vibrato adds motion to your tone, but without the “choppy” feel of a tremolo. Vibrato adds a more fluid movement. The slightly detuned, slightly chorus-ey modulation emphasizes bends and makes chords more interesting to the listener. Jimi Hendrix was a visionary user of the Uni-Vibe, which at its core is a vibrato pedal.
While guitar straps come in a variety of different materials, El Dorado only uses leather in theirs, so rest assured you're getting exceptional quality here. If you're going for a cool western persona, try starting your search with the top-rated Vintage Hand-Tooled Leather Guitar Strap, featuring classic basketweave embossing backed with genuine sheepskin shearling. This hand-engraved strap is finished with a solid nickel buckle and loops for a truly sophisticated look you'll be proud to showcase.
Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011. Retrieved 9 October 2012.
Last Update Sept 22nd, 2018 Electric guitars are those that have an amplification feature. You can connect your guitar to a power source and amplify the sound produced onto a loud speaker. They are normally a perfect choice for stage performances and bands. Below are brief reviews of 10 best electric guitars in India, which are among the best in Indian market. These best electric guitars were curated by our experts according to their popularity, reviews and ratings by people across India.

Epiphone features all-metal rock solid hardware on all of its instruments. The Les Paul Special VE comes standard with the legendary Locktone Tune-o-matic bridge and Stopbar tailpiece for easy set up. Tuning is fast and reliable with Epiphone Premium Covered tuners with a 14:1 ratio.The higher the ratio, the more accurate your tuning. The tuners are mounted on an Epiphone Clipped Ear headstock with Les Paul Model in gold and the Epiphone log in silver. In addition, a "2016" Edition logo is on the back of the headstock. 
The Supro aluminum Hawaiian lap steel was similar to Beauchamp/Electro’s “frying pan,” with a round body and guitar-like neck, very similar to the Rick, but with the top carved away to allow a little more access. Given the close nature of the L.A. guitar world, it’s entirely possible that all these aluminum guitars were cast at the same place. The head was three-and-three with a single cutout in the middle. The Supro had dot inlays on the fingerboard, with an alternating two/one pattern and four dots at the octave. A rectangular Supro logo plate sat between the pickup cover and the fingerboard. The pickup – the single-coil version of the Stimson design – was mounted under a raised cover (part of the casting) with a slit to reveal the bar polepieces. It had one volume knob on the treble side and was housed in small form-fit hardshell case. This was closest to Beauchamp’s patented electro guitar design, making the Supro brand a direct descendent of George Beauchamp. An important point to remember is that these cast aluminum guitars were made in Los Angeles.
Hum cancelling: hum cancellation is caused by reverse polarity, reverse winding keeps a revrse polarity pickup in phase with a non reverse polarity pickup. To reverse the direction of the winding, simply swap wires, using hot as the ground and ground as the hot. Polarity can be changed on many pickups. If the pickup has bar magnets, simply flip them over. If the pickup uses alnico polepiece AND has the new plastic bobbins such as is common on Fenders, the polepieces can be pushed out with a screwdriver and reinserted "upside down". If the bobbin is fiber DO NOT attempt to flip the polepieces; the wire is wrapped directly around the polepieces and will almost certainly be damaged.
After your design has been properly plotted out on the poster board you can cut it out with an exacto knife. Make sure you stay as true to your lines as possible so you have a nice clean line to trace once your ready to. Then lay out the template on body blank and trace away. I like to cut the piece of poster board the same size as the body blank I am using. It makes it a lot easier to line everything up that way. Now you're ready to move on to the next step.
Many web surfers contact me looking for a wiring diagram for an unusual / no name / import guitar after having no luck online. And sometimes you aren't going to find it, however, if you have an electric guitar that is similar to lets say a Strat ... it has 3 single coil pickups (and they are 2 wire pickups), one 5 way switch, 2 tone pots and 1 volume pot then you can simply use a Strat wiring diagram. It's often easiest to think of the instrument in terms of components not brand.

SOLD OUT: Here is another fine example of a Professional high quality Japan Crafted guitars...this one is "cross-braced" and is a Dreadnought style acoustic like a martin type exhibiting superior solid construction as well as the very high grade Mahogany body Top - Sides & Back which appears to be all-solid. The necks fretboard is a wonderful Indian Rosewood. This example is believed to be a Vintage 1986 Model. Serial # 86021355. The sound is rich and expressive and very tonefull as would be expected from a quality built instrument. The playability "action" is great EZ to play and this guitar stays in tune very well to with its quality Original Takamine sealed Chrome tuners "grover type" This guitar is professional grade and will serve you well. This guitar is not a new guitar and IS a real VINTAGE guitar and has mellowed well and its condition is rated a solid 8.5/10 very good-excellent with some natural wear -dings-scratches etc.. Overall appearance is Gorgeous! and is sure to please. SOLD .
In the Beatles' early days, George Harrison briefly billed himself as Carl Harrison in honor of his quick-picking hero. Perkins' bright, trebly style – which the rockabilly king picked up from blues players in Tennessee – defined the singles he put out on Sun Records ("Blue Suede Shoes," "Glad All Over") and influenced scores of players from Eric Clapton to John Fogerty. "He took country picking into the rock world," Tom Petty has said. "If you want to play Fifties rock & roll, you can either play like Chuck Berry, or you can play like Carl Perkins."
This is Yamaha’s C40II classical guitar, an inexpensive nylon-strung guitar that’s a cut above some of Yamaha’s even cheaper models designed for schools and the like. Many companies offer a line of low-priced, very basic designs tailored for education facilities. Don’t go that far down the price pecking order. The C40II for $140 USD on Amazon is a good compromise. Please do yourself a favor and get the $13.58 two-year protection plan!
Wengrow said that Gibson got outmaneuvered by its competitors. “In the 1950s and 60s, it was really just Fender and Gibson as the two main guitar makers and they became the standard bearers. But other guitar makers such as Ibanez, Jackson, Yamaha and Paul Reed Smith, came to existence and copied their standards but continually updated many features and customizations that better reflected the idiosyncrasies of the times, often for cheaper prices.”

1959 is widely considered to be the pinnacle year for Gibson’s mid-century solid body electric guitars, and no 1959 Gibson model is more famous than the sunburst Les Paul Standard. At first a commercial failure, the model was eventually adopted by some the world’s greatest guitarists – Jimmy Page, Duane Allman, Mike Bloomfield, Keith Richards, Eric Clapton, and Billy Gibbons, to name a few. The rarity and celebrity association of the model has pushed the values of original examples into the stratosphere. Gibson Custom’s 1959 Les Paul Standard is a painstakingly-accurate replica of these highly-valuable guitars rendered in detail so intricate that even the chemical composition of the parts has been scientifically examined and re-engineered – and that’s just one small example. Sonically, visually, and tactilely, owning a 2018 Gibson Custom Historic ’59 Les Paul Standard is as close as one can get to owning a priceless original!
Think of Stevie Ray Vaughan, and you’ll have a good idea of what overdrive effects can do. They’re based on the ‘broken’ sound that vintage tube amplifiers would make when they were fed a signal too strong for them to handle smoothly. Modern overdrive pedals can also have circuitry that emulates the same effect even when connected to a solid-state amp. Because they work by boosting the signal, experimenting with the effects of an overdrive pedal can be as simple as adjusting the volume and seeing what happens.
But the biggest difference between the American Special Strat and the Highway One model is in the pickup configuration. This guitar comes equipped with three Texas Special single-coils, which are overwound Alnico V pickups known for their tight bass, clear highs and pronounced mids. Famously, they’re also found on the Stevie Ray Vaughan signature Strat. And significantly, these pickups retail for about $200 for a set of three.
Complete information is not available, but guitars included the GC-2 with two humbuckers and GC-3 with a humbucker/single/single layout. It’s not known if there was a single-humbucker model, but there may have been if the Ultra Hard Body series pattern holds true. One twin-pickup BC-2 was offered, presumably Fender-style, with one P and one J-style pickup. Possibly a single-pickup bass was also offered. One source also lists a CG-21 with a humbucker/single/single pickup arrangement, but no other information is available.

The Wildwood staff feels that they are some of the best instruments to see the light of day since the mid-60’s. We have worked closely with the Gibson Memphis factory to create unique special run guitars that take these iconic instruments to new levels while honoring the Gibson’s storied history. By producing everything from classic reissues to signature artist models, the Memphis factory is taking their game to a whole new level. We are proud to present our Gibson Memphis inventory, and we invite you to look around and fall in love with one of these superlative instruments.
Ironically, the sound of certain synthetic reverbs is now such an established part of music history that most convolution reverbs come with some IRs taken from existing hardware reverb units or from old mechanical reverb plates. Also, if you have a convolution reverb, it is worth checking the manufacturer's site, as additional IRs are frequently available for download.

Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce and Cedar as the key to getting the desired tone from a guitar. Indeed, many beginning builders agonize over wood choice combinations as they relate to tone, with more experienced craftspeople offering suggestions that seem to assure the correct … [Read More...]
Epiphone returns with yet another Solid and high-quality Les Paul Standard electric guitar, this time, an ebony styled-version of the Les Paul series. The body of this ebony version is made of solid and durable mahogany wood construction, including a maple top design. The fretboard of this Epiphone Ebony version electric guitar is made of rosewood, containing 24.75 scales.

A Power attenuator enables a player to obtain power-tube distortion independently of listening volume. A power attenuator is a dummy load placed between the guitar amplifier's power tubes and the guitar speaker, or a power-supply based circuit to reduce the plate voltage on the power tubes. Examples of power attenuators are the Marshall PowerBrake and THD HotPlate.
And “tear” into them so like to do! My most recent “nightmare” was with such a simple thing as a fret “grind and polish” totally gone haywire! This particular repairman was nice enough, but broke so many things on my guitar just as a result of doing a fret job; he had it for another month after, and still could correct his mistakes! I final had to have the guitar literally “rescued” by the actual craftsman who made the guitar so it could finally be set straight again! It turned out that much as I had suspected, the repair guy wanted to see what made my guitar “tick”, so he unnecessarily tore it apart, but couldn’t properly put it back together again! He even broke 2 pickups by turning them too tightly as he lowered them!! Very costly errors, to be sure!
By the time After The Rain came out, the blues critics created enough of a backlash that it started affecting sales. Muddy must have realized that the records were upsetting his blues fanbase which had been loyal to him for over twenty years. Perhaps he feared he'd lose them forever if he stayed in this direction and that the young fanbase he had now might not stick with him as long. It wasn't until 1970 and after a more normal electric blues record (Fathers and Sons) that Muddy started talking badly about Electric Mud and then only mildly at first. Muddy released some great records in the rest of his lifetime, but he never experimented much with his music again.
Fender is the world’s leading guitar and amplifier manufacturing company, serving the industry since 1946. It is one of the best guitar brands in India for electric guitars. The Solid-body, Spanish-styled electric Telecaster guitar and Stratocaster are some of the most popular electric guitars today. Fender has made a mark in the Indian guitar industry with its high quality products. The price varies from mid budget to high budget. It markets under the brand names of Fender, Squier, Charvel, Gretsch, Jackson and EVH also.
So there we have it. Acoustic guitars are not just slabs of wood, one much the same as the other. Each has its own characteristics. Some will major on comfort, while others go flat-out down the path of pure volume. Whatever it is you’re looking for, Dawsons has the whole gamut of acoustic guitar body types, and can help you choose the size and style that’s right for you.
By moving up or down one level, in terms of magnetic strength, you can usually add or subtract a little edge from a pickup. If your guitar is too tangy, moving down one pickup level (e.g., from alnico 4 to alnico 2) may smooth it out. If you want to add bite, go with a slightly stronger magnet—like, alnico 5 to a ceramic magnet. The good part is that magnets are both easy to find and inexpensive in comparison to buying a whole new pickup.

SOLD OUT: Here we had a 40+ year old 1972 Alvarez 5080 Acoustic guitar that was built by the master guitar builder Kuzio Yairi. He used 30 year old vintage aged tone woods when they built this guitar over 40 years ago.. that would make this wood arround 70 years old... Thats can say that about a new Martin can we... not going to get tone like this from a new Martin either. This is one high class example replica of the Martin 000-28 this model is quiet rare and beautifully adorned with exotic tone woods plese refer to the pics. Just have a look at the beautiful exotic old growth Jacaranda Brazilian Rosewood back, sides, fingerboard...headstock overlay .., ebony pins with MOP and brass ring all high end classic detailed appointments... notice the real patina this guitar plays real well and has been played and it shows... in a good way to my eyes.. I love it. So will you just have a look... no visable issues, no cracks to be found, inlays, bindings, pickguard, tuners,frets.....all good..and sound is rich and has a nice sustain and is a pleasure to play... fresh from the JVG shop with a fresh bone saddle & nut & new Martin Marquis strings sweet! A must HAVE 40 YEAR OLD VINTAGE YAIRI 000-28 STYLE, Claptons favorite for good reason... SORRY THIS GUITAR HAS SOLD Thank you for your interest.
Years ago companies used to manufacture rotating speaker cabinets (the most famous being the Leslie Rotary Speaker) – as they rotated the sound would change and develop, creating interesting modulation effects. Nowadays such things are considered too large and inconvenient to transport and use, so we have stomp boxes to help us emulate the sound. The most famous of these is the Dunlop Uni-Vibe, and although it doesn’t sound as close as other pedals to the real thing, it has become a famous sound in its own right. Rotary speaker effects often have controls for the speed of the effect, and can sometimes (such as in the case of the Uni-Vibe) be connected to expression pedals to control the speed on the fly. If you’re into 60’s psychedelic rock like Jimi Hendrix, this one’s a must.
So what are acousticelectric guitars? Quite simply, it’s an acoustic guitar with slight modifications that means it can be plugged into a power amp. This means that the sound from the guitar can be made much louder for use live or with a band. It also means that, as the signal becomes electric, it can be altered with effects pedals and other equipment. Sometimes, because of this, electric acoustics are used when recording in a studio, though a microphone is often used too.

thanks for your note. We are not drawing any conclusions whether one is better than the other, just that they are different, which I think is apparent from the samples. Also, we did use only one pickup that we moved between the samples, and mounted it in the exact same location in relationship to the bridge. I would claim that the only variable that could have been controlled to a greater extent is the picking attack.
{"pageName":"[gc] vintage","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
One reason that some bass players choose to use a "bass stack" rather than a combo is that the separate component approach enables bassists to use different speaker cabinets for different shows or activities. For example, a bassist playing a stadium may use an 8x10" cab for this show, but then bring a 4x10" cab for a nightclub show the next day, or a 1x12" cab for a studio recording.
Many guitarists with instruments that have more than one pickup spend most of their time on the bridge unit. Using a variety of pickup positions when recording will thin or fatten the sound as required, but also help free up space when it comes to the mixing stage. Think of a recorded mix as a layer cake; too much density in one frequency range will cause a headache for the mixing engineer.
The strings movement moves the magnetic field creating current in the coil of the pickup. The string does not create the current the movement does. If you placed a solenoid beneath the pickup and moved the pickup you would also create a current in the coil. If you took the strings off the guitar, and held a hammer head over the pickup and activated the solenoid you would get a current in the coil.

1966 Yamaha FG180 Nippon Gakki Japan crafted over 50 years ago early RARE light GREEN LABEL in top vintage condition WoW Now at JVGuitars we are very proud to present such a SWEET and RARE FIND folks... This is an excellent example of the Japanese Vintage Yamaha FG180 is from 1966 Folks that right an oldie but a real goodie for for sure she is about 51 years old and as you can clearly see from our high resolution pictures it has been very nicely taken care of for over 5 decades just for you today thats AMAZING!!! WoW She's one of the very first of the highly sought after original first FG180 run with its light green label FG180 prototype to the later 1970's FG180 Red Label, She's HERE NOW at JVGuitars its been Pro set up and polishing and is all round vintage excellent condition no cracks no issues no warps no pulling no funny business from what I see and thats a lot of guitars this guitar is far above average for such a vintage piece. she's in top playing condition and the cosmetics are very good as well with natural play wear and patina of such a well loved guitar. Here are the General Specifications Scale Length 650mm (25 9/16") Body Length 505mm (19 7/8") Total Length 1038mm (40 7/8") Body Width 412mm (16 3/16") Body Depth 100 - 118mm (3 15/16" - 4 5/8") Nut Width 44mm (1 3/4") Top Material Sitka Spruce Back Material Mahogany Side Material Mahogany Neck Material Mahogany Fingerboard Material Rosewood Fingerboard Radius R400mm (15 3/4") Bridge Material Rosewood Nut Material Urea Saddle Material Urea Bridge Pins Black ABS Tuners Open Gear (Chrome) Body Binding Rosewood + Cream + Black Soundhole Inlay White + Cream + Black Pickguard Black Body Finish Gloss Neck Finish Gloss Color Natural Case FREE Original Marigold lined Semi hard Chipboard case. This Rare FG180 has been treated with care and respect and love for 5 decades and someone is going to be very pleased in deed. To purchase this rare beauty. contact Joe at: quality .

This list is called "best guitar techniques" not hardest guitar techniques, people are looking at some of more shreddy elements first, but many other things are far more important. I think alternate picking is one of the most important because it is the technique that truly gives you control over individual notes (not chords). It is commonly used in both rhythm and lead guitar unlike sweep picking which is only used by shreddicus maximus/l0rd 5hr3dd0rz. All these techniques are important but think of some more basic techniques first.
The Kent 800-series hollow bodied guitars all had asymmetrical bodies and the pickup closest to the neck was tilted. There are several Kents that had symmetrical hollow bodies and no tilted pickups. The pickups are either humbuckers or wide single coils with covers. They resemble Gibson ES-style guitars. The necks and headstocks are very similar to the Kent 800s. They're probably newer than the 700s and 800s. I won’t be covering those here.
by pedalhaven  @airbag3333  has a seriously stacked board! Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 

After shaping your sound, is important to add some depth to it, and here’s where the ‘ambiance’ pedals find their way into your rig. The chorus effect should be used properly, without overdoing it, but can give great results: the depth and the ‘3 guitarists playing your part’ effect can work amazingly well for your music. Delay and Reverb can be used lightly, in order to enhance your sound and fill up your guitar solos with a little space (by setting up a nice spring or hall reverb settings and a dotted delay) or heavily, to achieve creative sounds where the sky is the only limit.

The solid state amp isn’t really new either, but it only came into its own following William Shockley’s world-changing invention, the transistor. Its use for the audio circuitry allows the amp to be more adaptable and easier to tune, but despite innovations in recent years, the overdrive of solid state amps isn’t yet on par with what a tube can offer, and only a few manufacturers can boast of products that come close to sounding as clean as a tube amp.
In 1942, Valco unveiled a new Hawaiian lap steel, the Irene, which was offered as a Silvertone in the ’42 Sears catalog. Clearly inspired by the Supro’s first wood-bodied Hawaiian with the pear-shaped body from ’36-37, the Irene had a slightly narrower body and more squared-off corners, and was covered in white pearloid. It also featured a light-colored, painted-on pickguard with dark position markers. Basically, this had the same pickup and control plate as featured on the Clipper.
Visually, what sets this guitar apart is its distinct headstock shape, but there's more to this guitar than meets the eye. Firstly, the guitar's top is crafted from solid cedar, an interesting wood choice because this type of wood is more commonly used on nylon string guitars. The warm tone of cedar matches nicely with the bright sound of wild cherry, a staple tonewood used on the back and sides of most Godin guitars. This combination gives the instrument a more distinct appearance and sound. Other features that don't follow the usual convention include the use of maple for the neck, and its B-Band M-450 T preamp system.
If you had to write a soundtrack for the 20th century, electric guitars would almost certainly be playing the tune. No other instrument defines the angry rebelliousness of the modern age quite like it. Who could forget Chuck Berry, Jimi Hendrix, the Rolling Stones, or Nirvana—some of the greatest exponents of guitar-driven rock? But if you think playing an electric guitar is all about attitude and dexterity, think again: it's actually about the science of electromagnetism. Let's take a closer look a how these amazing instruments turn electricity into sound.
@Ricardo – I recommend placing tuners as close to your original signal as possible at the beginning of your signal chain. An EQ pedal can be placed where you would like to filter your signal to the settings of the EQ which is technically at any point in your signal chain. Try the EQ in different locations and use the setting that works best for your.
A range of other effects are used in various genres. "Wah-wah" and "synth" bass effects are associated with funk music. As well, since the 1960s and 1970s, bands have experimented with "fuzz bass" where the bass is distorted either by overdriving the amp or by using a distortion unit. Fuzz bass was used by psychedelic rock bands in the 1960s and early 1970s and in traditional heavy metal bands (Led Zeppelin) during the same era. Octave-generating effects, which generate an octave below the pitch being played are also used by bass players. Many bassists in modern-day hard rock and heavy metal bands use overdrive pedals specifically made for bass guitar. Since the late 1980s, bass-specific overdrive pedals have been available; these pedals maintain the low fundamental pitch. Using a regular guitar distortion pedal for bass would result in the lower frequencies being greatly lessened. Well-known overdrive effects for bass include the BOSS ODB-3 Bass Overdrive[1], Electro-Harmonix Bass Blogger[2], Tech21 Sansamp Bass Driver[3][4], the DigiTech|DigiTech XBD Bass Driver [5], and the Electro-Harmonix Big Muff.
Barney Kessel was known for playing his Gibson hollow body jazz guitar and used it almost exclusively on his own recordings. But when it came to rock, pop, r&b and blues recording sessions with the most popular performers of the early '60s such as Elvis Presley, Sam Cooke, Connie Francis, T-Bone Walker, Ike & Tina Turner, Phil Spector, Dinah Washington and Bobby Darin, Kessel turned to his Kay Barney Kessel Artist guitar.
You honestly could get a single multi-effects unit that will already have thousands of the most popular stompboxes built in, plug it into your PA or headphones, turn on one of the many built-in amp modelers, and you’re good to go. This is actually a solution that many touring musicians have gravitated towards, as it is so much easier to just carry around a single multi-effects unit compared to a pedalboard with several different pedals and a separate amp.
One thing is for sure: the advantage of a multi effects pedal is getting a lot of effects in one convenient package, which you can use to learn what guitar effects you actually use on a regular basis. Depending on the type of music you play, your style, and your skill level, chances are you don’t have a need for every effect type under the sun. Pro guitarists’ pedalboards are tailored to the tone and sound they need to achieve. Perhaps fuzz, delay, and compression are crucial, but not a flanger or chorus. Point is, if you don’t yet know this about yourself, a multi-effects pedal is the most perfect and cost effective way to start. Over time, if and when your love for effects deepens, as your budget allows you can start buying individual pedals that are better versions of what’s on your multi-fx unit. The overdrive in your Zoom G3X might be good enough to hold you over, but eventually you might want to get an actual Ibanez TS9 Tube Screamer.

The advantage of this specific package is that you’ve got everything you need to get started right away: guitar (duh), amp, strings, tuner, guitar cable, picks, gig bag, strap, and instructional DVD. Those of you who just wanna get a guitar and start, this is your choice. Squier also makes similar package, but I recommend this over the Squier because the parts (electronics) are higher quality, although the Yamaha costs a little bit extra.
Power attenuation[when defined as?] can be used with either low-power or high-power amplifiers, resulting in variable-power amplifiers. A high-power amplifier with power attenuation can produce power-tube distortion through a range of listening volumes, but with a decrease in high power distortion. Other technologies, such as dual rectifiers and the sag circuit[jargon]—which should not be confused with attenuation—allow high power amplifiers to produce low power volume while preserving high power distortion.[27]
The company was founded in 1931 as the Ro-Pat-In Corporation (ElectRo-Patent-Instruments) by Adolph Rickenbacher and George Beauchamp in order to sell electric Hawaiian guitars. These instruments had been designed by Beauchamp, assisted at the National String Instruments Corporation by Paul Barth and Harry Watson.[1] They chose the brand name Rickenbacher (later changed to Rickenbacker), though early examples bear the brand nameElectro.[2]
Thanks for posting the cool video. I have a Decca like that one. Its pickups migrated to my #1 guitar, which is a relative from roughly the same era (early 1970’s), a Daimaru (sunburst, jazzmaster / jaguar copy surf guitar body, tremolo, etc.). The Decca now has one Daimaru pickup (I wrecked the other one when I was a teenager — thinking I was going to ‘improve’ it), but otherwise, my Decca looks basically identical to yours — except for it has the original tuners, and I angled the bridge in the 1990’s. The neat sound you can get from one of these particular Deccas is the placement of the bridge pickup, it’s a bit further from the bridge than a lot of other electrics, which gives it a neat, plunky sound to it — as is apparent from your video.
Fast forward to 2018 and ESP is still going strong, with a huge range of speedy guitars tailored for heavy rock and metal, including several 7- and 8-string models. ESP offers a range of popular models in the budget market (under its LTD subsidiary) as well as high-end guitars, played by some of the biggest names in heavy metal – Kirk Hammett, James Hetfield and Stephen Carpenter to name a few.
After the retirement of Kuhrmeyer in 1955, the company was taken over by Sidney M. Katz. The product line of Kay was shifted toward electric musical instruments on demands, and in 1964, the company moved to a new factory in Elk Grove Village, Illinois. In 1965 Katz sold Kay to Seeburg Corporation, and he became the head of Seeburg's musical instrument division. In 1967, Kay was resold and merged with Valco, but dissolved in 1968 due to financial problems.[9]
Description: Body: Alder - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 3+3 - Bridge: Fulcrum Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Duncan Designed - Pickup Configuration: S-S-S - String Instrument Finish: Transparent Colors
There’s a huge range of cheap electric guitars out there that would not look out of place on the stages of the world thanks to high quality manufacturing and the brands actually caring about their products – “cheap” does not always mean poor quality and plenty of guitars out there will give you a fantastic playing experience for many years without breaking the bank.

Melodyne is a software application for OS X or Windows with which you can edit audio in a more musical way than was ever thought possible. In Melodyne, you work with notes – and not with a meaningless wave form. You don’t just see where the music gets louder or quieter but also where notes begin and end and at what pitch they lie. You can modify each note and thereby influence direc...
Multi-effects processors come in various configurations, too. Some are floor units that have built-in foot pedals and controllers so they can be operated while your hands remain on your guitar. There are rackmount processors (these can be fitted into a rack of recording gear in line with your signal chain) that incorporate a preamp for your guitar. The more sophisticated models have MIDI I/O for connecting guitar synthesizers to keyboards, modules, computers and other MIDI devices and include a divided pickup to attach to your standard guitar. These processors pack effects libraries that offer combinations of effects, amp models and stompboxes that can number in the thousands. Switching can be controlled by onboard knobs, foot controllers or guitar-picking technique. Expect to pay considerably more for a rackmount effects processor, in a range of three- to four-digit prices. 
In 1977, Gibson sued Hoshino Gakki/Elger Guitars for copying the Les Paul.[21] In 2000, Gibson sued Fernandes Guitars in a Tokyo court for allegedly copying Gibson designs. Gibson did not prevail.[22] Gibson also sued PRS Guitars in 2005, to stop them from making their Singlecut model. The lawsuit against PRS was initially successful.[23] However, the United States Court of Appeals for the Sixth Circuit reversed the lower court decision and ordered the dismissal of Gibson's suit against PRS.[24]

While electric guitar manufacturers like this are often more expensive, they do provide a level of customization that isn’t available with several mainline models. Most companies of this size can have a casual email or phone conversation with you, take a few notes about how you want your guitar setup (probably jotting it all down with pen and paper) and then making a guitar to your exact specifications.

While the Boss MS-3 is a fairly recent release, it does have quite the number of reviews, most of them coming from users who have nothing but good things to say about their experience with the unit. One user summarized what most reviewers felt by saying that the MS-3 is a "game changer". But it's not just about its amp and effects switching, because many were just as impressed with the sound quality of many of its built-in effects, including its overdrive and modulation sections. It's compact and portable design is also very much appreciated, making it an easy addition to any setups.
The design of this guitar probably makes it stand out from the “crowd.” This is another awesome six string acoustic guitar from the brand Juarez available in sunburst and black . It is designed for the right handed and mostly comes in Sunburst color without a bag. The body is made from blackwood with the top laminated with Linden Wood. The entire structure has a natural gloss finish, with the fret board having up to 18 frets. The hardware structure has a chrome finish. Prices are quite fair, ranging from INR 2,790. Find more details below.
The 75 Watt Fender Rumble 75 Bass Combo Amp and its 150 Watt and 300 Watt counterparts can produce an overdrive effect by using the gain and blend controls, giving overdrive sounds ranging from "mellow warmth [to] heavy distorted tones".[27] The Fender SuperBassman is a 300-watt tube head which has a built-in overdrive channel. The Fender Bronco 40 includes a range of effects including modern bass overdrive, vintage overdrive and fuzz.
SHEILDING Sheilding is good to use if you want to minimize that annoying buzz you can get from surrounding interference that electronic components such as amps can produce. You can use sheilding paint that is a bit more expensive but easier to apply than copper tape. All you do is paint it on and let it dry. It also gets into the areas tape can't reach. To install the tape you basically just apply it to the inside of the control cavity and solder up any seams that might let the interference through. The soldering can be a little tricky since you have to lay down a long bead of it along the seam. Kind of like welding. Here are some futher instructions After this is done you can install the pots and switch. Be careful when tightening them down not to scratch the finish. Add the knobs and get out your schematic for wiring it up.
Distortion effects are really like an overdrive pedal taken to another level. Many distortion pedals are simply overdrive pedals with the ability to dial in a higher gain setting (“Gain” can be thought of as the volume going into the overdrive components of the pedal). Some pedals will also have a built in equalizer to shape the tone of the distortion.
Wah and EQ manipulators work best before distortion and overdrive devices, near the start of the signal chain. The one exception is the Fuzz Face or any vintage-style fuzz, which needs to be slotted in before the wah. Try it – put your wah before and after your distortion and listen to how different it sounds. Also, compressors tend to work best when placed before drive effects.
Reverbs and delays can sound particularly unruly when run into an amp set dirty. If you use natural amp distortion but still like using pedals, you can run some effects into the front of your amp, and run time-based effects into an effects loop (most modern amps with channel switching will have an effects loop). Some modern programmable pedals, such as the TC Nova System or Eventide Time Factor delay, allow you to switch between -10 and +4 operation, so you can use them in front of your amp at the instrument level or at line level in an amp effects loop. This is really handy, allowing you to create and store presets tailored for using the pedal either in front of the amp or in the loop. Of course you can also use studio-type rack effects in amp effects loops. Units such as the Fractal Audio Axe FX and TC Electronic G-Major work great in this configuration, allowing you to store many presets and get pristine time-based effects, whether you are using clean sounds or dirty sounds.
With the correct strings on the guitar, and the strings tensioned to the tuning you intend to use, place a capo at the first fret, or depress the low "E" string at the first fret. While doing this, depress the same string at the 12th fret. Site along the bottom of the string and note its relationship to the top of the frets up and down the fretboard between the fretted positions. The string in this situation, since it is under tension, is essentially a straight edge, and the curve, or profile, of the fretboard can now be seen. Generally, a gap of 1/64 - 1/32 " between the bottom of any string and the tops of the 6-7th frets (when fretting the string at the 1st and 12th frets or higher) is considered acceptable. You could go a hair flatter, or even a bit more curved depending on the needs of a given player, but start here.
This is a real nice D-18 it Booms quite nicely with Vintage Tone of that of a much more expensive Big Named guitar for a fraction of what you would pay..its Japanese crafted 29 years ago by the master craftsman in one of the finest Japanese builders factory.. the great Ibanez...the Label inside says... THE MARK OF QUALITY CIMAR Quality Produced under Strict Quality Control by IBANEZ "Made in Japan" Serial # 82110013k ... 1st 2 digits 82 that's the not all Japanese Ibanez old guitars are so great not at all ..many were very low end guitars we saw in the 60's & 70's as a kid myself most were junk or we called them toys.. now that's not true for all of them though I can honestly say that... This is not a cheap guitar nor is it built cheaply ..this example was one of the good impressive one's they used beautiful grade woods on... This particular example it has a Strikingly beautiful straight grained Sitka Spruce Top ... it has ambered nicely now naturally with it's great patina created over the last 29 years . ya don't get that with a new Ibanez or even dare I say Martin with those white looking spruce top "yuck on thanks"... sorry back to this one ... The back sides & neck are all gorgeously grained AA higher grade Mahogany the fingerboard is dark Indian Rosewood with an ebony bridge..even the Original string Pins are aged beautifully amber tipped... I'm lookin pretty hard everywhere and I can not find a crack - separation or a defect to be found anywhere only the most minute microscopic its that clean.... JVG Condition RATED: @ better than average in Excellent used vintage condition wow!..This neck is arrow straight with a perfect medium slim taper neck feels great and action is EZ to play just about perfect...1-11/16ths at the nut very comfortable feel, frets are considered excellent vintage at lest 92%... Comes with a free Chip board case or an optional upgrade to a Hard shell case / ask... Just in.. no pics yet coming very soon stay tuned! Thanks for your interest.
Specs for your guitar include an ash body and carved maple top (rosewood was an option) bound with an abalone border, and a 5-piece maple/rosewood through-body neck. Other features include the bound 22-fret ebony fretboard with brass circle inlays, a matched-finish headstock with abalone border, 3-per-side tuners, two exposed humbuckers, and controls for each pickup. Its ivory finish is probably the most desirable color for this model, but the guitar was also available in a natural finish that highlighted the maple or rosewood carved top.
Gut strings were the original strings for the classical stylist.  They were literally made from the guts of farm animals, mostly sheep.  The intestines and the process used to make these strings became more expensive than nylon and thus have fallen out of favor.  Even though you may hear the term “cat gut” strings, this style of string was never made from the innards of our cute, cuddly, feline friends… just the beasts we like tend to use as a food source.
Even apparently crude solutions can produce useful results. For example, I was recording at a friend's flat many years ago and the amp I had only sounded any good when it was played flat out. The answer was to place the speaker cabinet on its back, place the mic right up against the grill, then cover the whole thing with blankets, sleeping bags and anything else that came to hand. It made the level in the room far more tolerable yet still produced the sound I wanted!
Designed by Todd Langner (who also engineered the ADA MP-1), the Langner DCP-1 possesses somewhat of an infamous reputation. Very few know about it, but everyone who does, swears by it’s greatness. Built with much of the same blueprint as the Bogner Fish, the Langner features two independent channels with fully adjustable boost functions. Using five 12ax7a tubes, it’ll produce the glassiest cleans to the highest of high gain tones. Presets can be front panel selected or footswitched. If you’re into rare gear, this is the amp for you. Good luck finding one!

Clearly if you need a Gibson but have to count your pennies Epiphone should be your top choice. However, Some people don’t realize that Epiphone was once a competitor with Gibson, and even today some of their semi-hollow and hollow-body guitars are worth mentioning with the top brands out there. The Dot is well known as an affordable version of the Gibson ES-335, but there are also guitars like the Casino, Wildkat, Sheraton and Broadway.

SCALE LENGTH What is a "Scale Lenght?" The scale lenght is the lenght the string travels between the nut at the top of the fretboard and the bridge at the mid section of the base of the guitar. To determine the scale length of your guitar you would measure from the front part of the nut where it meets the fretboard to the center of the 12th fret on the neck and multiplying that by 2. Add about 3/16" to that on the low e string and taper that to about 1/16" added to the high e string. This is called compensation and that is why you see that tapered line on a bridge. Go to Stewart MacDonnaldfor more info. They also have a Fret Calculator that helps you determine your particular scale length in addition to a page dedicated to helping you out with tons of free info for your guitar building projects.The fret is the metal of nickle wire that is raised up off the fretboard. I would suggest buying a neck that has been pre made from a manufacturer that fits the design concept that you want to go with. I bought mine from Guitar Parts USA for about $70. You can pay anywhere from $50 to $300 for a neck at online retailers, but surf around and make sure you are satisfied with what you get. Guitarpartsusa will tell you to buy an expensive neck if you are building an expensive guitar, not a $70 neck. But for mine the $70 neck works just fine. Once you get the neck in and you determine what the scale length is you can lay it all out on paper. I recomend buying all your hardware, pickups and knobs before you draw your final template. This will allow to place everything where you want it and know what size holes to drill for the electronics and how big the cavites will need to be for them and the pickups.

For instance, during 1970s and early 1980s, Japanese manufacturer Tokai Gakki produced superb replicas of 1957–59 vintage Les Pauls, and replicas themselves were gradually highly regarded. In the 1980s, to respond to the high demand for vintage models, Gibson itself began to offer a line of “Custom Shop models”, almost accurate reproductions of early Les Paul crafted by the Gibson Guitar Custom Shops.

The output jack is where you plug in your guitar lead. These are generally 1/4″ and transfer the signal created by your pickups to your guitar amp. They are usually connected from a ground wire and input wire. When the lead is plugged into the output jack the signal can be transferred. These can often be a source of trouble and need to be kept tight to reduce noise.
There’s such a broad range of potential guitar and amp tones out there that it’s impossible to say “this works, but this doesn’t.” As a rule of thumb, though, go into the recording experience with the knowledge that the guitar parts that work live with a lashing of overdrive (natural cranked-amp gain or pedal generated) will often work better in the recorded mix with somewhat less gain and saturation. Heavily overdriven amps tend to swamp the mix, getting in the way of other crucial instruments, and sounding surprisingly muddy and washed-out as a result. Tightening one’s tone frequently brings back the punch and drive they seek from the part in the first place, and helps the guitars sit better with whatever else is going on in the arrangement. For instances of this, listen closely to a handful of guitar parts in classic-rock recordings that we tend to think of as examples of “heavy guitar tone” – Angus and Malcolm Young with AC/DC, Paul Kossoff with Free, Pete Townshend with The Who – and you’re likely to hear that they’re actually cleaner than you recalled. Then, when you get bogged down in an effort to record a satisfactory tone, consider cleaning it up at the amp or using a smaller amp.
I have a beautiful 2003 Ltd and my friend who has played for many years has the Taylor and he ended up borrowing my tak for five months he didn't want to give it back you know the guy has played with some well known folk's so I trust his judgment played with Keith Green and America and I have played over thirty years so I haven't let to many go by without some trial and ownership this tak is as good or better than the best Martin can offer. Ovation can't touch it and of course Gibson is too soft for me I own a fender and a Yamaha 6 and 12 for the money you can't beat a yam and I have played hummingbird to dove guild gretch Washburn breedlove which is a favorite not many I haven't played so with all this my top ten is Takemine Martin Gibson Breedlove Hagstrom Taylor Guild Gretch Washburn and Yamaha. If you can find a Hag it will blow your bag I have a 1971 Hagstrom acoustic I believe it was a demo for Golden Earing it was a gift from an old friend from Deutschland any way I will say ...more
This is a right handed 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Natural Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Natural Finish. I also have the same guitar in Cherry finish, one of only 5 in the Cherry finish.
I have the Epi SG400. It is very playable, and I think the stock PUP's are fine. It is a very versatile guitar. The only thing about the SG is it has a heavy neck. I mean strap one on, and that long neck just tugs down on my left shoulder. I actually tried to sell mine a while back just because of the heavy neck. I added a strap bolt to the top of the horn thing, or whatever you call it, and that helped. Some like the SG310 which is cheaper, but it has a bolt neck, and I think that will translate into an even heavier neck. Rhonda makes some SG clones as well. My only advice would be try straping one around your neck before you buy if you can.
The 5968 written on the label is a model number, not a serial number. It seems that the labels were void of serial numbers rather than model numbers (the opposite of what I had originally suspected). The Dorado I'm working on is constructed of rosewood while the Model 5969 is Mahogany. The 5969 is identicle in size to the 5968 but had nickel plated tuners and a satin finish. From my quick look around the auction business, it appears that the Mahogany back and sides model brings about $150 less than the Rosewood model.
When consulting our buying guide, the first thing you need to think about is your budget. How much can you afford to spend? Generally speaking, musical instruments tend to get better the more expensive they get, although this is of course not always the case. And even if you would buy a really expensive guitar you might not be experienced enough to notice how good it is.
Since Jackson is currently owned by Fender, they have the facilities, resources and more importantly, the legal right to use Strat bodies in their designs. The result are legitimate super strats from the brand that helped jumpstart the entire hot-rodded guitar market. The Adrian Smith SDX is a great example, co-designed by renowned Iron Maiden guitarist to be a road and gig-worthy metal guitar while retaining an accessible price point.

With 20 watts of rated power and an 8-inch speaker, the Champion 20’s sound output capability is a little above average for this class of amplifier. Those who like the features but need more power can check out the 40-watt version with a 12-inch speaker, the Champion 40, which costs twice as much but should be powerful enough for most jam sessions and gigs. The Champion 20 also includes a 3.5 mm line input for connecting a smartphone (good when you want to play along with recorded music or a music instruction app) and a 3.5 mm headphone output.

Beyond effects, some processors offer dozens of other capabilities including recording tools, rhythm track generators, plus sound models based on vintage amps, speaker cabinets, microphones, mic preamps, and much more. Many also have MIDI and USB connectors in addition to XLR and ¼” inputs and outputs, and are designed to work seamlessly with computer and iOS-based recording software and apps.
Ibanez is considered to be one of the best-selling electric guitars and bass guitar brands. But, they also produce a quality acoustic guitar for acoustic guitar players. The V series is really popular for newbies, making it one of the best acoustic guitar brands for beginners. Their guitar uses mahogany wood on the neck, and back and sides of the guitar. It also includes a rosewood bridge and rosewood guitar fretboard.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1377.76, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodH91419, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=799.99, priceVisibility=1, listPrice=999.99, usedCount=3, salePrice=999.99, isOnSale=false, showMSRP=true}
(Book). Backbeat's successful Handbook format applied to the world's most popular instrument. The Electric Guitar Handbook is the latest entry in Backbeat's best-selling handbook series, combining a two-part book and an audio CD in a practical lay-flat binding for ease of reference when playing. Part one of the book examines how different types of electric guitars are made, and why varying construction methods influence the way guitars sound. It also looks at the role of various pieces of guitar hardware, including pick-ups, tremolo set-ups, and bridges. Part two is a comprehensive, user-friendly course in playing the electric guitar, from the basics of posture and hand positioning to music and tab reading and advanced performance. Newly written exercises presented in the book and also on the accompanying CD take the learner through each step in the process, covering styles including rock, country, blues, soul/funk, indie/alternative, and metal. Author Rod Fogg also offers practical advice on everything from simple scales to complex chords, alongside short features introducing key performers and styles.
Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (Some sources, or maybe just one source quoted all over the net, states that they may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. There are several photos on the net showing David Bowie in his Ziggy Stardust days playing a red Hagstrom with Kent branding on the headstock.
The Top Guitars specialized only in Custom Made Electric Guitars and Basses - "We will create an instrument that will delight you with exceptional tone and great playability, optimized to your personal preferences and all with the utmost quality, beauty, and rigorous attention to detail. We are experienced builders of custom electric guitar and bass bodies and necks. We craft our exquisite custom electric guitar and bass bodies and necks using a variety of time tested, great sounding woods, offering options that you can not buy off the shelf. We can also build for anyone that has a custom design that they would like built to their specifications. We do our best to meet your dreams continually striving for unattainable perfection.Only the best, one-of-a-kind, and built just for you! "
The rotary speaker effect is based on an actual rotating speaker system invented by Donald Leslie called the Leslie speaker. It was often paired with a Hammond organ, but in the 60’s guitar players also began using it for the unique tone and effect it gave the guitar. The original Leslie speaker cabinet used a two speaker system with a rotating horn and bass woofer drum. This created a cool, swirling effect where the music seemed to move around the room. Obviously, guitar pedals can only simulate this rotatary effect, which can be enhanced with a stereo amp setup. Of course you could use an actual Leslie speaker (or one of the newer competitors), but costs are high and it requires lugging around an extra speaker cabinet.
On a Les Paul, adjusting the saddle position can be a little tricky while the string is tuned to pitch. Sometimes you can get a screwdriver in there and turn it, but often you need to slacken the string and move it to the side. Also note that sometimes the adjustment screws are at the back of the bridge rather than the front. I prefer adjusting the saddle while the string is slack anyway as there is a lot of stress on both the string and the saddle otherwise.

In the 1920s, the earliest combo amplifiers had no tone controls. The first tone controls were simple, mainly providing treble adjustment. The limited controls, the early loudspeakers, and the low amplifier power (typically 15 watts or less prior to the mid-1950s) gave poor high treble and bass output. Some models also provided effects such as an electronic tremolo unit. In confusion over nomenclature, Fender labeled early amplifier tremolo as "vibrato" and called the vibrato arm of the Stratocaster guitar a "tremolo bar" (see vibrato unit, electric guitar, and tremolo).

Taylor has swiftly made several electric guitars that made their way to the hands of professional guitarists onstage. Moreover, a few of their models are directed towards working players too. In fact, Taylor seems to be caring about the beginners and intermediate level players as well, since they produce several guitar models aimed at these customer groups. If you are ready to scour out your wallet to get your desired guitar, Taylor will be the perfect choice for you.

Rickenbacker manufactures three distinct pickups for their current standard models: Hi-gain, Vintage Single Coil Toaster Top, and Humbucking. All three pickup designs share the same footprint, allowing them to retrofit into most current or vintage models. The tone varies from one style to the next, partially because of the types of magnets used[13] but also due to the amount of wire wound around the pickup’s bobbin.
Either way, the results in the Descent Reverb are nothing short of phenomenal.  If you watch the demo video below, you'll hear some of the most unique sounds capable of being produced by a guitar pedal. Pigtronix did something similar with delay and pitch shifting in the Echolution 2 Ultra Pro, but we think the combination is even better in the Descent.
Glen Campbell; DJ Ashba, Melissa Etheridge, Nikki Sixx, Mick Thomson; Kaki King, Steve Lukather; Marcel Dadi, Ray Davies,[30] Roy Harper,[31] James Hetfield, Josh Homme, Cyndi Lauper, John Lennon, Country Joe McDonald,John McLaughlin, Yngwie Malmsteen, Bob Marley, Ziggy Marley, Stephen Marley, Roman Miroshnichenko, Maury Muehleisen, Dave Mustaine, Vince Neil, Jimmy Page, Richard Daniel Roman, Shania Twain, Boz Scaggs, Luis Alberto Spinetta, Statler Brothers, Cat Stevens, and Aaron Tippin;[30]

This is not a cheap Chinese manufactured kit of questionable quality where the parts simply don’t work together (like most of the other kits that you will find on Ebay, Etsy and Amazon). We proudly manufacture these kits in our shop in Portland, Oregon. We are a family-owned company building products and traditions that we expect to last for a long, long time. We produce instrument kits with exacting specifications, high quality production, and domestic, sustainably-cultivated sources of materials whenever possible.
well it all depends on your budget. If you're looking for a beginner guitar go for pluto 39 inch model it will cost you around 5.5k. Don't go below this as all those cheap guitars are useless after 6 to 7 months of use. If you can increase your budget then I'll suggest a cort AD810, pluto 41 inch semi acoustic model, or a fender SA150. These will cost you around 7k to 10k but these are the best you can buy as a beginner! Just remember that your first guitar should not sound crapy and it should be good on your fingers. I hope this helps. Happy guitaring!
The FX8 lets you configure up to eight effects per preset, from a list of impressive effects that are modeled from classic to modern stompboxes. It also offers a more traditional work flow via Fractal Audio's "Scenes" mode, which lets you assign effects to footswitches, turning the unit into a virtual stompbox pedalboard. And since it utilizes the same algorithm as their premium processors, you can be sure that each effect model has the same sound quality. Fractal Audio is also known for their boutique like attention to detail and build quality, which is prevalent in the FX8's design. Most notably its footswitches which are designed to have no-mechanical contacts, meaning no noise and improved reliability.
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.
I recognize that these lists are really the preference of the writer and that in itself makes the list valid. However……Robert Johnson at #1? I realize that many people studied him and he was a great guitarist for his era, but he wasn’t even the best guitarist of his era. That title goes to Son House, who taught Robert Johnson. The fact is that you could have had a Clapton without a Robert Johnson. Johnson wasn’t the only player whom Clapton was inspired by.
{ "name": "Candy Apple Red", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Candy-Apple-Red-1500000152032.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "09-22-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152032", "shipToStore": true, "displaySku": "K47863000002000", "displayId": "1500000152032   POS #: 113861041", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Candy Apple Red", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
We as a team are always extremely inquisitive and wondered about something, which can be anything, happening around us. One day we planned to share these things which are enough to spice up soul of internet freaks and we made Here on, we pick, research and display some really cool examples which hit us somewhere in our daily lives. The website let the visitors to explore chunk of daily stuff they may need to know about. You will get a bunch of trending information from around the globe. Every latest buzz, from footpath to limelight, we have it all, in Article, Charticle And Listicle way with the categories- Taza Khabar, Hottest In Cinema, Top Tenz, Education, Jobs & Career, Tech In Trend, Sports. So, if you’re a viralmaniac, quench your thirst here!

Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-...  Click To Read More About This Product
[SIZE="2"]Guitar Gear: Gibson '61 RI SG, Dean Cadillac Select, Charvel 475 Special, BC Rich NJ Bich, Gibson Faded V, MIM Strat, Warmoth Tele, LP Copy, Yamaha Acoustic, VHT Pittbull Fifty/ST, VOX VT30, Blackheart BH5H, '72 Hiwatt 4123 Cab, Traynor TS-50, POD XT, 16 ohm THD Hotplate, 80's Peavey Rage combo, Boss ME-50, Russian Big Muff, Graphic Fuzz
Prince at #10 just shows me that whoever made this list hasn't seen him play that often. And really, KR doesn't even need to be on the top 10. JH is way overrated, yes on the list, but NOT #1. But anyways, cool to see Prince even on the list. Those stupid people writing those comments are probably the ones that say "Prince plays guitar?" They are so living in a box!
It has been stated repeatedly that the CEO is a challenge, toxic whatever and yes, all of it is true. Many if not most people who take a management position here don't last a year. This is especially true at Corporate where at any given time half of the positions are open because employee turnover is off the charts and they are horrible at recruiting talent to get replacements hired. That's a really bad combination to have in a company. So the first question you have to ask yourself is: do you want to show a job that only lasted six to twelve months on your resume with a company that has a positive, almost cult like global brand image? Or another way, how will you explain your short tenure to the next company you interview with and make them believe you weren't the problem? When I was outside Nashville and told people I worked for Gibson 100% of them said "that's a great company" even though they had no clue. It's highly likely your next potential employer will think that way as well.
“Back in the fifties and sixties, you could tell what studio they had been recording in just by listening to the song,” Dr. Susan Horning Schmidt says. She is a professor at St. John’s University who has researched and written extensively about sounds and the recording process. During the period Dr. Horning Schmidt is referring to, the recording facilities were also physically bigger and bands often played together in a more live-type setting. Horning Schmidt states that “there’s a lot more space in the recording, a lot more acoustical space and dynamics.” Unfortunately, we’re losing that space with contemporary recording and production techniques.

I own some 13 or so, high end American, Canadian and/or Japanese 6 strings 7 basses and a full studip of gear and if my opinion means FA then I can't help but not mention my Washburn Custom Shop WV548! It has Parker guitars (famous for the FLY) patented composite glass carbon fiber fretboard, EMG active PU's (81, 85) and a real Floyd with the Buzz Feiten system and it is bar none, the fastest, smoothest, and by far the nicest playing (and sounding for that matter) guitar I own or have played in my some 30 odd years plus, playing electrics.
German tonemeister and Vintage endorsee, the one and only Thomas Blug arrives in the UK for a promotional tour this weekend. Following an appearance at Northern Guitar Shows London International Guitar Show at Kempton Park Racecourse on Sunday, Thomas will perform the following in-store clinics to launch the brand new BluGuitar AMP1 Mercury Edition.
The Red Hot Chili Peppers always knew how to rock a party; it took John Frusciante to turn them into an arena-packing band with a sound they could call their own. Frusciante is a remarkably elastic stylist and a gifted sculptural arranger who pushed the Chilis to explore new worlds without getting in the way of their funk-pumped energy; he beefed up their sound with both well-placed fire (the volcanic, Hendrix-style solo on “Dani California”) and remarkable elegance (the indelible opening chords of “Under the Bridge”).
A good question to consider at this point: What the absolute darkest tone you’d ever want from your guitar? I know the two times I’m likeliest to lower the tone pot are when I want a dark, jazzy neck pickup sound, and when I’m trying to get a clarinet-like sound using an EBow. These next examples show how the various caps behave in those situations. We’ll go from lowest value (minimum treble cut) to highest (maximum treble cut).
Fuzz boxes and other heavy distortions can produce unwanted dissonances when playing chords. To get around this, guitar players (and keyboard players) using these effects may restrict their playing to single notes and simple "power chords" (root, fifth, and octave). Indeed, with the most extreme fuzz pedals, players may choose to play mostly single notes, because the fuzz can make even single notes sound very thick and heavy. Heavy distortion also tends to limit the player's control of dynamics (loudness and softness) - similar to the limitations imposed on a Hammond organ player (Hammond organ does not produce louder or softer sounds depending on how hard or soft the performer plays the keys; however, the performer can still control the volume with drawbars and the expression pedal). Heavy metal music has evolved around these restrictions, using complex rhythms and timing for expression and excitement. Lighter distortions and overdrives can be used with triadic chords and seventh chords; as well, lighter overdrive allows more control of dynamics.[citation needed]

{"id": "519377", "skuOrProductId": "519377", "categoryId":"site1AAG", "name":"Firebird Studio Electric Guitar", "pageUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"All the classic Firebird Studio elements--mahogany body, set mahogany neck, Alnico Classic 'buckers, chrome hardware, and stopbar tailpiece with a limited edition finish.", "value":"167.58", "priceMin":"167.58", "priceMax":"399.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"70", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}
“But I was recently talking to a guy at Yamaha who told me the total global revenue from musical equipment sales sold round the world doesn’t add up to one-thousandth of Apple’s AAPL, -1.42%   daily turnover. It’s a small specialist market,” Hook said. “Gibson guitars are expensive and they have been taken over by so many cheap copies. That’s what has caused a lot of harm to such a luxury product.”

It starts off with a chambered basswood body with an arched maple top, that follows the Pro Jet single cutaway shape. Because of the semi-hollow body, it is lighter on your shoulder and on the ears, and many notice that it emphasizes the high frequencies a bit more. Playability is also light, thanks to this guitar's shorter 24.6" scale length. The maple neck is topped by a 22-fret rosewood fretboard with a standard 1.6875" wide nut. Giving this guitar its biting tone are two Blacktop Filter'Tron Humbuckers.
If ever there was a candidate for compression, bass is it. This instrument has a wide dynamic range (even more so when slap techniques are employed), but it usually needs to sit at a very steady level in the mix. But should compression be applied during recording, to control the levels going down, or later, during the mix, to insure the best blend in the track? Well, the answer is probably both, but with potentially different approaches to squashing the signal. During recording, a Limiter might be the ticket, to control transient peaks that might overload ADCs, producing pops and spikes that can ruin a take. A classic fast VCA compressor/limiter (like the dbx 160) could be employed to handle peaks, without really reducing the player’s dynamics at this early stage. Then when mixdown rolls around, more gentle compression can be introduced (like the smooth squash of an optical compressor like the LA-2A), to tighten up the dynamics, as needed for that particular mix. Applying the right kind, and amount, of compression/limiting at all stages will assure you get nice clean recordings, that can be properly squeezed into the mix when the time comes. 
In addition to the Les Paul, Gibson is a brand well known for pioneering some classic guitar shapes and constantly innovating, introducing concepts such as the humbucker, the digital guitar, and – most recently – the Min-ETune automatic tuning unit. Since the fifties, Gibson electric guitars have been used by everyone from James Hetfield to B.B. King.

Best acoustic I've owned. It's an Oregon dreadnought, an all round stunning looking guitar. The sound is beautifully balanced, clear with nice defined bass, sits perfectly in the midrange and projects well without being too bright. It's light weight with meticulous craftsmanship and beautiful timber. When you look at these guitar it's obvious that they are built with a lot of care and attention to detail.

You might expect PRS's budget take on its venerable Custom 24 to pale in comparison to the real deal, but that certainly isn't the case. Considering the price, this is one impressively put-together instrument; we scoured our review model for signs of the guitar's price tag, and all we could find was a slightly loose vibrato arm fitting - a minor point. Like the traditional USA-made Custom 24 design, there's no scratchplate, so the SE Standard 24's electronics are installed in a cavity. The non-locking SE-level tuners are smooth-handling, and visually, you'd struggle to distinguish the vibrato from top-end PRS guitars. The SE Standard isn't quite as refined or sleek a playing experience as PRS's S2 and above models, courtesy of the chunkier Wide Thin profile, higher action and slightly creaky vibrato response, but a more player-personal setup helps to rectify that. The tones are here, though: searing solos, toasty rhythms and coil-split quack are all within reach – at this price, it's an impressive performance from one of the best electric guitar brands in the market.
Yet another awesome 6 strings right handed electric guitar. The body is finished in solid basswood while the neck has a bolt on . The fingerboard is made of rosewood with 22 frets . It mostly comes in  black colour. It is quite affordable, with prices ranging from INR 9,071 depending on various market factors. you can click below to get more product details such as offers available:
The truth is that you can play any genre of music with just about any type of electric guitar. Many blues players run Gibson Les Pauls with beefy humbuckers, while Iron Maiden completely broke the stereotype that you can't play metal with a Stratocaster.  Guitar effects pedals really changed the game too. However, some guitars do actually deal better with certain music genres.
Monte Allums Mods – Tweaking the tone of inexpensive stomp boxes is an obsession of Monte Allums. He started modding mainly because he refused to spend $200 to $300 or more to achieve great tone. Monte believes that most expensive boutique pedals are simply clones of inexpensive pedals, but upgraded with higher-quality components. So his mods and kits feature classic designs with better components to deliver superior tone.
000-15: Base model of the upper end Martin Guitar line. All mahogany orsapele construction. ‘A Frame’ “X” top bracing, 14 frets clear, Optional model 000-15S 12 frets clear. All -16 and -16 series 000 instruments have long scales (25.4″) and 1-11/16″ nut widths, in contrast to the -18, -28, and -45 series, which have the ‘traditional’ 24.9″ 000 scale, retaining the 1-11/16″ nut width.

We’ve already shown you how you will sometimes want more than one mic on your amp to achieve ideal sound in your tracks. Many semi-distant and ambient techniques will be most useful, along with a close mic, but on a separate track, to retain the option of blending a more-direct tone to create your overall sonic picture. Any single-mic positions discussed thus far can be combined into multi-mic sounds in the mix when recorded to different tracks. There are also several other approaches to multi-miking that might come in handy now and then, and which are worth some exploration.
The first step is to determine what’s in your pickup already. The most common magnets for humbuckers are (roughly in order of strength): alnico 2, alnico 4, alnico 5, and then various types of ceramic magnets. In simple terms, the stronger the magnet, the greater the potential output. But you can’t just look at magnetic strength alone, because stronger magnets also affect the string’s ability to sustain.
Bottom Line: The Boss ME-80 seems to be aimed at the beginner and intermediate guitarist who is getting into the effects game. What guitarists love about it is that it tries hard (and succeeds) at replicating the feel of messing with a pedalboard full of effects. Unlike the Line 6 POD HD500X, you won’t need the manual! We’re not necessarily taking a dig at the Line 6 pedal - that one very much has its merits, is FAR more customizable and editable, and arguably the effects and amp modeling sound a bit better. The Boss ME-80 is just a different style, and judging by the user reviews we read people really enjoy having all the knobs for all the effects immediately available. The Boss ME-80 is also a tremendous bargain considering how powerful it is. Sure, it’s not exactly cheap, but it’s a very well-made, intuitive, nice-sounding all-in-one multi-effects pedal which is great for practice, studio recording, and live use.
While hollow guitars are best suited to jazz, there have been a handful of cases where rock musicians have utilized fully hollow jazz box guitars in rock and roll. Chief among these would be Ted Nugent, who actually used the excess feedback produced by his Gibson Byrdland as a musical tool. Hollow ES-335 style guitars are used in blues and rock more frequently than the jazz box (the Beatles used the Epiphone Casino extensively), though because of the feedback they produce most musicians stick with semi-hollow instruments.
If you're in need of some assistance, you've come to the right place. At BestReviews, our goal is to help you find the perfect products to fit your individual requirements. We test items in our labs, gather feedback from existing customers, and consult experts. The result? Fair and thorough reviews that help you cut through the jargon. Read on for our full guide to electric guitars to learn all you need to know to pick the right one for your next jam session.
Technically the knobs are just the parts you turn when adjusting your volume or sound. When you remove the knobs however you are left with the pots (potentiometers) which are used for both volume and tone control. They look identical and almost are but there are differences in the way a volume pot and a tone pot is wired, which will make more sense by the end of this article.
“It was just a different world,” Ford says. “There was ‘Don Kirshner’s Rock Concert,’ Ed Sullivan, Dick Clark, and they would have one band on and you would wait all week to see who that band was going to be. And you could talk about it all week long with your friends — ‘Saturday night, Deep Purple’s going to be on, what are they going to play?’ — and then everybody’s around the TV like you’re watching a football game.”

{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: agile","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"agile","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
Frets are the metal strips (usually nickel alloy or stainless steel) embedded along the fingerboard and placed at points that divide the length of string mathematically. The strings' vibrating length is determined when the strings are pressed down behind the frets. Each fret produces a different pitch and each pitch spaced a half-step apart on the 12 tone scale. The ratio of the widths of two consecutive frets is the twelfth root of two ( {\displaystyle {\sqrt[{12}]{2}}} ), whose numeric value is about 1.059463. The twelfth fret divides the string in two exact halves and the 24th fret (if present) divides the string in half yet again. Every twelve frets represents one octave. This arrangement of frets results in equal tempered tuning.
Initially inspired by his older brother Jimmie, Stevie picked up the guitar at an early age and was playing in bands by the time he was 12. By the time he formed his legendary trio Double Trouble in 1980, Stevie Ray Vaughan was already a legend in his adopted hometown of Austin, Texas. After hearing and seeing Vaughan playing at Switzerland’s Montreux Jazz Festival, pop icon David Bowie invited Stevie to play on his Let’s Dance album. Vaughan’s career took off form there.
#A1056:Another super rare piece from Guitars West! This little number found its way across the pond and onto our doorstep. A very early VamPower 70's 100 watt P.A. 6 channel input head. With speaker channels, one 4 ohm-100w-#1 & 2 input, one 8 ohm-100w-#3 & 4 input, one 15 ohm-100w-# 5 input, two 8 ohm-50w-# 1 & 2 input, two 15 ohm-50w-# 3 & 4 input.
Used Instrument Buyer - [New Window] - When it's time to sell your used instruments, nobody makes it easier than UIB. We make our best offer up front, right out of the gate, so you know you're getting top-dollar for your used musical equipment. Since 2006, we've helped everyone from professional musicians to weekend guitar warriors get the most value out of their used instruments. We offer free no-obligation quotes for your used equipment. upon your approval, simply pack your equipment, ship it to us free, and we'll promptly mail you a payment.
This guitar needs love. It is in used condition with the biggest flaw being near the input jack.  This is the super rare RT series that were only produced for a couple of years and it is MIJ. Has tremolo but no arm If you are reading this, then you know what these are about.. I am the second owner of this guitar. Was bought from a guitar shop locally in San Jose, CA. No returns please
Martin never actually produced Stinger catalogs, so a detailed accounting is pretty difficult. However, there were four basic Stinger body styles, a fairly conventional Strat shape, a Strat-style with an arched top, a Tele and a Fender-style bass. These came in a variety of finish and pickup configuration options. Headstocks were a kind of modified Strat-style six-in-line, with a pointed throat and slightly hooked nose, with a painted triangular Stinger logo running under the strings. All had bolt-on maple necks. Guitars had a 25.4″ scale, while the basses were 34″ers.
The idea behind a piezoelectric pickup is more or less the same as with any regular electric guitar pickup. Guitars which utilize this system have a piezoelectric pickup located under the bridge. Once you pick a string, the sound vibration from the string is then interpreted by the pickup, generates an electrical signal, and is then fed into the preamplifier to be boosted to line-level.  You can think of it like a microphone's diaphragm.
That wraps it up folks! We hope you found some inspiration from our chart and managed to get a little closer to finding your best guitar for jazz. Now it’s simply a matter of reading some reviews, watching some videos and making a decision! Don’t forget, if this is your first guitar, you’ll need to buy a good amplifier to go with it. If you liked our stuff, you can subscribe to our newsletter for more sensational guitar deals.

They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton
Either way, the results in the Descent Reverb are nothing short of phenomenal.  If you watch the demo video below, you'll hear some of the most unique sounds capable of being produced by a guitar pedal. Pigtronix did something similar with delay and pitch shifting in the Echolution 2 Ultra Pro, but we think the combination is even better in the Descent.
The lower strings of a guitar (E, A & D) will often have a nickel winding over their steel core. Nickel also makes an appearance in the frets of most guitars, which are commonly made from nickel-silver. Despite the name, this alloy doesn’t actually contain any silver, but is named for its silver appearance. It’s actually an alloy of copper, nickel, and zinc. These nickel-silver frets aren’t as hard-wearing as steel, so some guitar manufacturers use stainless steel instead to give the frets more longevity.
An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.
The GK Studio mixes traditional flamenco construction techniques, a comfortable body shape and modern Fishman electronics, resulting in an easy to play nylon-string guitar that can be plugged in for stage use. My main concern about this guitar is its slightly thinner body depth, neck and nutwidth(1.96"), but these are calculated tweaks that should make this classical guitar play and feel more akin to conventional steel-string acoustics.
Because there is no inherent right or wrong amp, the suitability of the end gadget will depend on your personal taste and the tuning of the ear. Quality guitar amplifiers are designed to precisely reproduce sound while maintaining a clean and accurate tone. You can find acoustic and electric guitar amplifiers from brands like Fender, Peavey, and Blackstar.
I agree that you should spend more on the guitar than the amp, but if you have a nice guitar and a cheap amp, you aren't giving the guitar enough width and breadth of tone capabilities to warrant spending $1500 or more on a guitar. So, if you're going to spend over $1200 on a guitar, don't buy a lousy amp. A Peavy 30 is a decent amp, but is short on breadth of tone as compared to a Fender Deluxe Reverb 22 watt. Marrying the guitar and amp is an important part of the process, they are symbiotic. My advice, as a player for over 40 years is to buy as good a guitar as you can. For beginners, a bad guitar will not get you playing, in fact, the most common reason young novices stop taking lessons is that the cheap junker they got is unplayable, even by professionals. It's hard, not fun, seems like a world of work and they quit. That's not how it's supposed to be. It's a fun thing, so get out there, get a good playable instrument and you are on your way to a lifetime of good times.
When I first plugged it in, it made a sound like it was "fretting out" if you put a bar at the twelfth fret position. That's a pretty good feat, given that the guitar has no frets. It turned out that someone had cranked up the pole pieces for extra gain, but had cranked them so far that the strings made contact with them when the guitar was played. A quick tweak right in the store with a jeweler's screwdriver sorted them out and revealed the lovely vintage sound of this little beastie. Supro developed a neat strings-through pickup system with staggered pole pieces that this guitar features.

Note: For additional information and history on Ibanez guitars, please check Wikipedia. For a great overall resource for Ibanez guitar questions, check out the Ibanez Collectors World website. The ICW is a gathering of Ibanez collectors who relish in the challenge of not just collecting Ibanez guitars, but of identifying old models, dating guitars by serial numbers, and generally watching the vintage guitar marketplace to understand how interest in Ibanez guitars is evolving.
Lawsuit Takamine F375s Hand built in Japan and still in excellent vintage condition! Build type is Rare Exotic Tone woods series Jacaranda Brazilian Rosewood back-sides-fingerboard & headstock overlay JUST Gorgeous. Its workmanship is really top shelf by any standards, We installed and set up with Martin Marquis 80/20 strings 12's, as well as setting this guitar up with a New bone nut & saddle, Condition is very good with a few minor hard to see scratches on its back you have to look closely sometimes at an angel ( clear coat only not threw to wood ) general play here and there as any 37 year old guitar that has been played would get... dinks and such but nothing major to detract from its obvious outward beauty, This example has an excellent neck its 1-11/16th's at the bone nut, fingerboard is very good as are the frets at 90%, its straight and has a nice meaty feel, has the Martin design detail of the Diamond Volute on back, original tuners are excellent as well, a warm vintage vibe to this 37 year old vintage Gem. Tone is rich with good volume she Sings well!!! JVG Rated 9/10 higher if it wasn't for the few minor clear coat scratches in its clear coat not to the wood that I can see more like swirls and such may be possible to fine grade 3000 wet sand and polish out its possible if it doesn't sell soon when I get the chance I'll do it, its a commitment because it may not sand out alone it may require a few thin clear lacquer applied and buffed out to cure it forever if so a guitar of this caliber deserves the attention.. ( the price will go up after I do that work ) and that really doesn't have to be done to make this guitar just very good -excellent vintage it would bring it very close to mint!.... aside from the few minor scuffs this guitar still qualifies as vintage excellent right now, just thought I would point those out. So to be clear about this listing the way you see it now is the way it is offered.Its a F375s and not the EF375s yet This guitar has a factory installed transducer type pickup installed and it sounds wonderful, Its said to have been installed by original owner in Tokyo by Takamine shop its a very clean job I call it CLEAN where they do not make extra unnecessary holes for output jack instead they use the END PIN hole and its a combination strap pin and or output jack, So this guitar is either Acoustic or Electric really nice in deed in SUPER Condition well above average. This beautiful instrument comes with its original hard shell case it to is in very good vintage condition its heavy duty molded type with plush black interior all functional fully. This is the total package. Contact Joe to buy: .
Launch price: $1,427 / £999 | Body: Mahogany with maple cap | Neck: 3-piece mahogany | Scale: 24.75" | Fingerboard: Ebony | Frets: 24 | Pickups: Seymour Duncan JB humbucker, Seymour Duncan Jazz humbucker (EMG 81/60 reviewed) | Controls: 2x volume, tone, 3-way selector switch | Hardware: EverTune bridge, Grover tuners | Left-handed: Yes (without EverTune) | Finish: See Thru Black, Dark Brown Sunburst
Read Full Review Here is another superstrat design electric guitar on the list that is well recommended for a budding guitarist. While for veteran player’s out there who is on a hunt of buying an all around electric guitar on a minimum prescribe budget. The ESP LTD M-10 could be that affordable gem of a guitar you’ve been looking for and always wanted.
Bought an ovation a couple of years ago and it hasn't failed me yet. Mine's a fairly lower in the range Ovation Celebrity, but it's excellent. One of the most comfortable feeling guitars I've ever held, good projection, nice tone, even been known to out do a Gibson further down the neck. Plus bonus feature is that it does sound so much clearer and warmer out of the amp
Here we ( SOLD ) are very proud to offer a USA built Martin Acoustic electric the model # JC-16RGTe.... More info soon to come and more pics as well... near mint condition like new! Everyone from Eric Clapton to Sting to Johnny Lang has played a Martin guitar, and professionals and amateurs alike know the bright sparkle and deep, resonant tone that Martin guitars have become famous for, from the most high end acoustics to the Backpacker. Carefully hand-selected tonewoods, master craftsmanship and beautiful finishes and styles make Martin acoustics a class all their own, and must be played to be believed. Martin sets the standard for acoustic guitars, and since 1833 has been a leader in guitar innovation and craftsmanship. The following info is from Martin. Martin JC16RGTE Features: * CONSTRUCTION: 1 Style; Ply Blocks; Mortise/Tenon Neck Joint * BODY SIZE: D-14 Fret CUTAWAY * TOP: Solid Sitka Spruce * ROSETTE: Bold Herringbone * TOP BRACING PATTERN: D1 Hybrid * TOP BRACES: 1 Style/Scalloped * BACK MATERIAL: Solid East Indian Rosewood * SIDE MATERIAL: Solid East Indian Rosewood * ENDPIECE: White Boltaron® * ENDPIECE INLAY: Black/White Boltaron® * BINDING: White Boltaron® * TOP INLAY STYLE: Multiple Black/White * NECK MATERIAL: Solid Spanish Cedar * NECK SHAPE: Modified Low Oval * NUT MATERIAL: White Corian® * HEADSTOCK: Solid/6 String No Diamond/Standard Taper * HEADPLATE: Solid East Indian Rosewood/ Raised Gold Foil Logo * HEELCAP: Solid East Indian Rosewood * FINGERBOARD MATERIAL: Black Micarta® * SCALE LENGTH: 25.4" * # OF FRETS CLEAR: 14 * # OF FRETS TOTAL: 20 * FINGERBOARD WIDTH AT NUT: 1 11/16" * FINGERBOARD WIDTH AT 12TH FRET: 2 1/8" * FINGERBOARD POSITION INLAYS: 28 Style * FINGERBOARD BINDING: White Boltaron® * FINISH BACK & SIDES: Semi Gloss/ Dark Filler * FINISH TOP: Polished Gloss * FINISH NECK: Semi Gloss/ Dark Mahogany Stain/ Dark Filler * BRIDGE MATERIAL: Black Micarta * BRIDGE STYLE: 1 Style Belly * BRIDGE STRING SPACING: 2 1/8" * SADDLE: 16" Radius/Compensated/White Micarta® * TUNING MACHINES: Chrome w/ Small Knobs * RECOMMENDED STRINGS: Martin MSP 4100 Light Phosphor Bronze * BRIDGE & END PINS: White w/ Black Dots * PICKGUARD: I-02 Tortoise Color * ELECTRONICS: Fishman® Prefix Premium Stereo Onboard Blender .
Offers include 20% British VAT and are valid as long as stocks last. Shipping costs to the U.K. are 10 EUR (approx. £7), free shipping on orders above 149 EUR. Please click here for international Shipping Costs and Delivery Times. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Capacitors are typically used as filters to control tone. In most cases, they are used to filter out very high frequencies before being sent to ground (the output jack) which controls the warmth of your guitar’s tone. Capacitors vary greatly and come in a range of materials from ceramic, film, paper and electrolytic (mainly used with active pickups).
The Supro line continued to grow in 1938, as can be seen in the CMI catalog. Still around was the Supro Spanish Guitar, now called the Supro Avalon Spanish Guitar, other than the name change (which is not featured on the guitar, as far I can ascertain), it is identical. Gone are the wood-bodied, frumpy-pear Supro Hawaiian Model and the Model D amplifier, although a Supro Special amplifier is mentioned (and not described) as being available for $40, the same price as the Model D. One and the same?
An acoustic-electric guitar has an electronic pickup that’s usually built into its bridge. This pickup is used to capture the sounds produced by the top’s vibrations. This is then transmitted via an onboard preamplifier to an external acoustic guitar amplifier or PA system. But plugging-in is strictly optional. Unplugged, an acoustic-electric guitar typically sounds just like a fully-acoustic guitar.
Our first impression of this guitar was that something must be wrong. Surely this guitar is way more expensive than we thought? We doublechecked and the truth is that it’s just incredible value for money. Both the design and the sound are wonderfully good and we understand why Schecter describe their Schecter Hellraiser guitars as having “raised the bar on sight, sound, quality and affordability”- we totally agree!
Description: Body: Mahogany - Top Wood: Mahogany - Neck Attachment: Set - Neck Wood: Mahogany - Neck Construction: D-Shape - Fingerboard: Ebony - Frets: 24 - Inlay: Pearl - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Ebony - Hardware: Black, Grover Tuners - Pickups: Seymour Duncan Live Wire - Pickup Configuration: Dual - String Instrument Finish: Charcoal Burst, Vintage Burst
In the 1920s, the earliest combo amplifiers did not have any tone controls. Tone controls on early guitar amplifiers were very simple and provided a great deal of treble boost, but the limited controls, the loudspeakers used, and the low power of the amplifiers (typically 15 watts or less prior to the mid-1950s) gave poor high treble and bass output. This made these early amplifier/speaker systems a poor way for upright bass players to amplify the sound of their instruments.

The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.
Acurious phenomenon that ac-companies certain guitar compa-nies is an inability to translate success from one medium to another. For instance, Martin has never been able to transfer its reputation for high-quality acoustics to electric guitars. And Fender has never been able, on its own, to really succeed in marketing acoustic guitars. Instead, it purchased Guild.
The guitar's history mirrors the cultural values, preoccupations, and norms in the United States over time. So, too, does the guitar's design, especially since the development of solid-body guitar construction by the 1950s. Because the sound produced by solid-body electrics does not depend on their shape, makers could experiment with a wider range of guitar designs. This era's seemingly radical instruments echoed the popular cultural focus on space-age modernity. The Fender "Strat" recalled the modern tail fins and imaginative colors of Detroit's cars, while the Gibson Flying V literally appeared ready for takeoff.
{ "thumbImageID": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst/L21533000005000", "defaultDisplayName": "Fender Player Stratocaster Maple Fingerboard Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst", "sku": "sku:site51500000219387", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst-1500000219387.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst/L21533000005000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000219385", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black-1500000219385.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black/L21533000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Polar White", "sku": "sku:site51500000219381", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Polar-White-1500000219381.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Polar-White/L21533000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Buttercream", "sku": "sku:site51500000219388", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Buttercream-1500000219388.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Buttercream/L21533000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tidepool", "sku": "sku:site51500000219384", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Tidepool-1500000219384.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Tidepool/L21533000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }