Silvertone starter pack is incredibly hard to beat. The candy blue finish gives the guitar a gorgeous aesthetic that looks fully professional. The pickup selector has 5 positions, and there are two tone knobs to give even more control over the sound. Stratocaster fans will love this guitar! Also included in the set is a gig bag, small Silvertone amp, strap, 5 picks, Allan wrenches, strings, a clip-on tuner, and a tremolo bar.
I have come across a few guitars that were easier to play than just about anything else I've ever played, including scores of very nice, expensive guitars.  My champion here is an old Yamaha acoustic that I found at a garage sale for $40.  It looks terrible (burns, dents, dirty, etc.).  The tone is not sweet (hint of cardboard).  It plays like butter.  It is the one guitar that I have kept (out of way too many to count) to give to any family member who decides they want to learn.

Is there any particular reason you're opposed to Kontakt libraries? All of the plugins you mentioned are sample-based themselves, with the notable weakness that you would not be able to change the mapping, grouping, programming (etc), unlike with Kontakt. As someone who uses a lot of virtual instruments, I'd say it's always preferable to have a sample-based instrument in an open sampler plugin since you can see what's going on under the hood and change things like envelopes as needed.
At ("GuitarBassPro"), we are committed to protecting the privacy of our customers and users of our web site located at (the "Site") . This privacy policy ("Privacy Policy") gives you details of our privacy practices, including (a) what information we collect about you when you use the Site; (b) how the information will be used or disclosed; and (c) your rights with respect to our collection and use of your data. We may modify these policies from time to time and will provide notice of any major changes by posting such notice on the Site.
Some make your lowest volume notes rise up to an audible level with an expander, which will increase the amount of sustain your notes have.  It almost sounds like a sound flower blooming.  Others act like traditional compressors with a threshold and compression ratio. The louder sounds are reduced in volume, which helps in producing a more level volume overall from your guitar and amp.  The sound guy will consider you his best friend after you send him this more consistent signal.

As Tom Wheeler writes in The Soul of Tone: Celebrating 60 Years of Fender Amps, "It’s powerful, it’s loud and it’s sensitive to the player’s touch. It sounds great, responding beautifully across the frequency spectrum. It exhibits a sparkling, harmonically rich tone at low and moderate volumes. At louder volumes it thickens with a sweet distortion that only seems to get creamier the more it’s cranked. It is particularly well matched to certain popular guitars, especially the Stratocaster."
Phase Shifter pedals found their way into the guitar community in the 70’s with pedals like the MXR Phase 90, Mutron Phase Shifter, EH Small Stone, Foxx and others. The sweeping sound it produces is unmistakable and a legendary trademark of many guitarists sound. The MXR Phase 90 can be heard all over Van Halen 1 and II. Brian May used the Foxx phase on “Sheer Heart Attack,” The Eagles “Life In The Fast Lane”, and Led Zeppelin’s “The Rover” to name but a few.
Like the Strat above, the Fender Telecaster shares the title of being one of the most legendary electric guitars ever produced, and owes a lot of its authentic vintage sound to its unique pickups – which are both fantastic and frustrating at times. A Tele will usually feature two single-coils: a smaller one at the neck and a larger, slanted pickup at the bridge. They both deliver a twangy sound, with the bridge offering great treble tone and the neck a little more balanced. The neck pickup’s main complaint is that it is often muffled in output – unless you find a good set such as the Fender Vintage Noiseless Tele Pickup Set, which keeps things crisp and clear.
The way that manufacturers state the wattage output of an amplifier can be confusing. Amplifier manufacturers may state that a combo bass amp produces 600 watts at 4 ohms and 300 watts at 8 ohms. If the speaker mounted in the combo amp is an 8 ohm speaker, then the combo by itself will only produce 300 watts. This combo amplifier will only put out 600 watts if an "extension speaker cabinet" is plugged into the combo amp with a speaker cable. Plugging a second 8 ohm cabinet in parallel wiring with the combo amp's internal 8 ohm speaker will lower the amp's impedance (electrical resistance or "load") to 4 ohms; at this point the amp will put out 600 watts. Another factor that can make it difficult for bassists to select a bass amp is that different manufacturers may state their amps wattage in Root Mean Squared (or "RMS") and in "peak power". For example, a bass amp ad may state that it produces 500 watts RMS and 1000 watts "peak power". The RMS figure is much more important than the peak power wattage.

The Givson Guitar Corporation makes guitars which sell under various brand names and are considered as among the best guitar brands on the planet. The company is famous to have devised the arch top guitar and created a few of the most iconic instruments in guitar history. Some iconic versions are the SG, Explorer, Flying V, ES 175 as well as the Firebird. The Les Paul Melody Maker is a popular model amongst many guitarists in different countries.
Practice makes perfect. While this might be a trite statement that your teacher used to say as you rolled your eyes in annoyance it could not be closer to the truth. Practice is especially vital with music. No matter what you plan on playing or already play unless you practice you’re not going to get anywhere even with the best guitar. So we have figured out so fat that practice is vital to reaching the level you want but that is not the end of it. A good guitar is just as important. And I don’t mean a great guitar that you will have to shell out your entire savings on. No, I mean a quality guitar that will help you out in your practice rather than hinder you. (If you still have not got a guitar but plan on doing so we have an entire catalog of the best guitars under $100, best guitars under $300 and so forth). You thought that’s where we would end the list of what you need to learn how to play? Nope. You need a good amplifier. As much as this equipment is often overlooked because it seems too had to choose, it is vital for practice.  Without further ado, let’s get into some of the best guitar practice amps.
Since the early days of the electric guitar, blues musicians searched for different ways to overdrive their amplifier's signal. Of course, when rock'n'roll took off, the process of "distorting" a guitar tone became a lot easier thanks to new amp and pickup designs. Soon, musicians like Link Wray were making a name for themselves with the use of distortion. By the mid-60s, fuzz pedals were being used by teenage garage rockers around the world while performers like Dave Davies and Pete Townshend made distortion and overdrive a part of their signature sound. Today, distortion and overdrive effects pedals are a dime a dozen, and a quick glance at this section will make that obvious. 

Multi-effects devices have garnered a large share of the effects device market, because they offer the user such a large variety of effects in a single package. A low-priced multi-effects pedal may provide 20 or more effects for the price of a regular single-effect pedal. More expensive multi-effect pedals may include 40 or more effects, amplifier modelling, and the ability to combine effects or modelled amp sounds in different combinations, as if the user was using multiple guitar amps. More expensive multi-effects pedals may also include more input and output jacks (e.g., an auxiliary input or a "dry" output), MIDI inputs and outputs, and an expression pedal, which can control volume or modify effect parameters (e.g., the rate of the simulated rotary speaker effect).
The heaviest heffalumps in this year’s roundup, share a few strands of DNA with early Mastodon, blending bludgeon and benign  in ambitious and unpredictable ways. Brady Deeprose and Dan Nightingale form the two-pronged guitar attack, leading these lofty compositions from blast-beaten brutality to doom-y sludge and back again. Their debut album Mire was released last month and is the sort of fully-formed statement that requires metallers to pack a spare pair of pants.
Fender is considered as an American manufacturer of amplifiers and stringed instruments, which was founded by Clarence Leonidas Fender in the year 1946. They provide a wide range of guitar. It has comfortable necks and  smooth fingerboard. Their headquarters located in Scottsdale, Arizona, United States. The guitar will available at Rs. 12,199/- onwards (approx). For further information, visit
Many arguments can be made for Peej’s gifted lead guitarist (and corn-dogging, cheese-mongering Stevie Ray Vaughan acolyte) Mike McCready, but it’s Gossard whose songwriting and toothsome licks propelled the Seattle grunge icons early, record-setting releases. The winsome chords of both “Daughter” and “Black,” the white-knuckle smash of “Animal” or “Deep” or “Do the Evolution” — all were anchored by Gossard, a quiet type more invested in classic-rock craft than classic-rock showmanship.
I'd never heard of this brand but was recently in a store in North Carolina looking for a nylon string guitar. The salesman asked me if I was "open minded" and if I'd be receptive to trying a brand that I probably had never heard of. He handed me a really pretty instrument with a very different looking headstock. I immediately figured he was showing me a very expensive instrument. I asked how much it cost, but he didn't answer. He simply replied "Try it, then let me know what you think." I had no idea how much this guitar would cost, and honestly I hate guessing games, but the guitar was really beautiful. I played several classical guitars there that day. A Yamaha, a Cordoba and an Alvarez, but the Merida was unquestionably the best sounding (and looking).
One master's name that kept being repeated by the guitar experts was Roger Crisler of Crisler Guitar Repair in Carrollton. He's been in the business of repairing guitars for almost 40 years. Some of the best guitarists in the DFW area turn to him when their guitar is sick: Chris Watson, Bnois King, Zach Weeks, Drew Adkins, Smokin' Joe Kubek, the list just continues to grow. He's trusted, and his work is respected. "When you love what you do, it doesn't feel like a job," he says.
A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:

{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: signal processors","pageName":"[gc] shop: pro audio: signal processors: multi effects processors","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: signal processors","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"multi effects processors","prop5":"[gc] shop: pro audio: signal processors: multi effects processors","prop6":"[gc] shop: pro audio: signal processors: multi effects processors","prop3":"[gc] shop: pro audio: signal processors: multi effects processors","prop4":"[gc] shop: pro audio: signal processors: multi effects processors","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}

MAKE YOUR OWN BODY BLANK Another neat trick to create your own body blank for $10 is to get a 3/4" thick peice of Birch Plywood that comes cut into a 4' by 2' board. Simply cut out two rectangular sections of the board that will accomodate your desing and wood glue them together. Be generous with the glue to make sure there aren't any spaces between the boards when you press the two together, clamp and stack weights on top of it so the two peices are joined firmly and let dry overnight. This gives you a a 1 1/2" thick body blank that is rigid and works great for electric guitars. You will have to go with a solid color paint when you finish it but you won't be able to tell the difference between it and the solid wood blank. Plus you'll save a good chunk of change that you can use towards good pickups and hardware. If you want to make the body a little thicker, you can get a 1/4" peice of birch and glue it between the two thicker peices. It's also a good idea to prerout any wire cavities in that 1/4" peice before you glue them together. That way you don't have to worry about drilling them later and ruining the top of your guitar body with the drill.
I am not satisfied with the sound I am getting from my guitar so I have decided to invest in a new set of strings. I bought an Electric guitar about 1 year ago and have not changed the strings as yet. Since it was not new when I bought it so I do not know how long they have been on it. I am not sure what the gauge of the strings are. I am trying to play lead. Should I go for a .,08 or .09 or a bit higher? I want to do bends as well.
Even with a H-H configuration, you could utilize coil splitting to achieve single coil-ish sounds. While arguably this does not give a "true" single coil sound, if humbucker sounds are mainly used, this can be enough. My impression is that most people aren't using the middle position that much, I think the way forward is to try different pickup configurations to find out what you need.
A great app for playing and basic editing of general midi files is Sweet Midi Player which includes a lyric viewer for midis with lyrics/chords. You can load one of the General Midi SoundFonts above to greatly improve the sound quality. For Windows PC use the free program Coolsoft VirtualMIDISynth to install a new GM SoundFont (Get the latest version 2.1.0 for Windows 10).
Audio feedback: Audio feedback is an effect produced when amplified sound is picked up by a microphone or guitar pickup and played back through a guitar amplifier, initiating a "feedback loop", which usually consists of high-pitched sound. Feedback that occurs from a vocal mic into a PA system is almost always avoided. However, in some styles of rock music, electric guitar players intentionally create feedback by playing their instrument directly in front of a heavily amplified, distorted guitar amplifier's speaker enclosure. The creative use of feedback effects was pioneered by guitarists such as Jimi Hendrix in the 1960s. This technique creates sustained, high-pitched overtones and unusual sounds not possible through regular playing techniques. Guitar feedback effects can be difficult to perform, because it is difficult to determine the sound volume and guitar position relative to a guitar amp's loudspeaker necessary for achieving the desired feedback sound.[90][91] Guitar feedback effects are used in a number of rock genres, including psychedelic rock, heavy metal music and punk rock.
The output of the rails is a crunchy, high sustain rock tone that turns your Strat into a much heavier and hard-hitting instrument. The pickguard, pots and five-way volume selector are all included with the wiring taken care of. It’s also really easy to change pickups using a solderless method that allows you to remove and add pickups by simply using screws.

Further down the Seagull line, looking at models outside of the Artist Series, the components and woods aren’t the same but we still see an impressive attention to detail. The Seagull S6 Original is a bare-bones acoustic, perfect for beginners and intermediate players. This is a guitar worth checking out if you need a solid acoustic and don’t want to break the bank.
Vintage guitar amps are older guitar amplifier "heads", speaker cabinets and combo amp/speaker cabinets, which guitarists, record producers and bandleaders seek out for their unique tone. Some[which?] recording studios have a selection of the most popular vintage guitar combo amps, amp heads and speaker stacks, so that performers can get a retro sound. During the 1980s, when most guitar amps being manufactured used "solid state" semiconductor technology, many musicians seeking an older style of sound (for blues, roots rock, etc.) favored older amps that used vacuum tubes (called "valves" in the UK).[23] Popular vintage models include the Fender Showman, Bassman and Vibroverb amps, and older models made by Ampeg, Gibson, Marshall, and Vox,[24] as well as other smaller companies such as Valco, Danelectro, and Premier.
Maton established itself early on the Australian rock scene in the late Fifties, assisted by Australia’s tariff regime, which made imported guitars far more expensive than the local equivalents. Maton guitars were used by many well-known Australian pop and rock groups including Col Joye & The Joy Boys. The company also made one of the first sponsorship deals in Australian rock, supplying Melbourne band The Strangers with a full set of the distinctive ‘El Toro’ model guitars and basses (notable for their outlandish ‘horned’ body shape) while the group was working as the house band on the TV pop show The Go!! Show in the mid-Sixties.
B.C. Rich has been scorching stages all around the world with their monstrous guitars for nearly 50 years. With bodies like a battle axe and tones that are just as brutal, B.C. Rich guitars have become staples in the heavy metal community. Inspired by the look of classic motorcycles, B.C. Rich guitars are as unmistakable as they are undeniable. If you're a fan of seriously heavy music, you've already seen these beautiful guitars around the necks of some of the biggest names around. Slayer's Kerry King, Matt Tuck of Bullet For My Valentine, Lita Ford, Ginger Wildheart of the Wildhearts, and Pat O'Brien of Cannibal Corpse are just some of the metal messiahs who crank out riff after riff on B.C. Rich guitars. If you're after a B.C. Rich of your own, you've come to the right place. You'll find guitars for all skill levels in the section, it's just a matter of taking a look around and finding the axe that's right for you. For example, if you're a beginner looking for their first killer electric guitar, you'll want to take a look at the Bronze Series Warlock. If there is one word to perfectly describe this guitar, it would be "wicked." It has a wicked look, a wicked sound, and is offered up at a wicked price. With BDSM humbucking pickups for a broad dynamic range and a beveled top, this is the kind of six string that any young rocker will want to learn on. Of course, if you're already a serious player who is looking for a truly intimidating beast of a guitar, you'll want to get your hands on the Rich Bich 10 Supreme Electric Guitar. This 10-string guitar has a look you'll have to see to believe, and a sound quality to match. With Seymour Duncan humbucker pickups and the ability to completely revolutionize your playing style, this versatile guitar is an absolute knockout. A B.C. Rich guitar is exactly what you need to get you through the rock and roll trenches. With bone shaking volume and bodies to match, B.C. Rich guitars are sure to get you noticed when you're on the stage.
If you're new to distortion and overdrive pedals, you might be wondering what the difference is between them. For the most part, they do the same thing and are both often referred to as gain pedals. How they differ is that distortion pedals usually provide a harsher, grittier tone with increased sustain. When it comes to distortion, think of genres like grunge and death metal. On the other hand, overdrive pedals are designed to emulate the sound of a tube amp when you increase their volume. The result is a warm yet crunchy sound that's ideal for playing blues and classic rock. Of course, one is not better than the other, and the right distortion or overdrive pedal for you will be a matter of personal preference.
What started out as Gibson’s daughter company that was tasked with producing affordable guitars, has grown into a giant. Not so long ago, Epiphone was the brand you turned to if you wanted a legit Les Paul but didn’t have the money for Gibson one.Today, things are vastly different. Gibson stepped up their game across the board, producing some of the absolute best guitar on the market.

When buying your first guitar, the cost is always a matter of consideration. Be careful not to let this become the focus of the search otherwise you run the risk of compromising on quality. Think about it, you don't want to learn on the shoddy piece of equipment. You can usually get a good value with proper research. If you have a friend who plays the guitar; find out if they are willing to give you the benefit of their experience.

The Les Paul Custom single cutaway was discontinued in 1961 and replaced with the SG (as we know it) designation for “solid guitar”. This model featured a thin 1-5/16″ body and a double cutaway. Confusion abounds to this day over the name Les Paul Custom. Since the single cutaway was discontinued, Gibson transferred the name Les Paul Custom to the new models.
Want to visit our guitar shop? We electric and acoustic guitars in a comfortable laid back environment steps away from the Damen Brown Line, 81 and 50 CTA bus. The guitars we carry are more than just used guitars. Each guitar has a story - whether it’s where it was played, when it was built or how it was treated. Our guitar shop specializes in guitars for players and collectors. Vintage guitars and used guitars are inspected and set up by our Luthier before leaving our shop. Stop by our showroom often as our inventory changes frequently.
There are many variations on the solid-body guitar theme. Companies such as Ibanez, Yamaha, PRS, Jackson and many others make solid-bodied guitars. Generally you get what you pay for, but provided you avoid the very cheapest models, and stick with reputable brands (such as those mentioned above) you can spend a relatively small amount of money and get a guitar that will last you long into your playing career.
Best Answer:  First, make sure you have new or clean strings that aren't dead. You should hear a metallic harmonic overtone to picked notes particularly on the low E, A, and D wound strings. If your low E sounds in tune but makes a flat dull boww boww boww instead of dang dang dang when you pick change them. Set your amp up for a fairly bright sound clean, playing off the bridge pickup. Make sure the guitar volume knob(s) are rolled all the way on and tones are all the way up, no roll off. If you can't get a nice clear clean sound that doesn't sound distant and muted then you have some issue with the guitar electrics or amp. If you're playing off the neck pickup that's a big muddier right there. The neck pickup is good for clean rhythm playing, jazz, and for a hollow warm tubey sound on single notes but tends to muddy overdriven power chords. Once you have the amp set for a bright clean sound that's not too brassy (if it has a master volume in addition to a gain or channel volume set the gain or volume low for a clean sound and use master for output level, let the RP90 do the effects work, not the amp preamp for now.) bring in the RP90. I'm not familiar with it but try it on a few overdrive and distortion settings. If you've only been an acoustic player high overdrive or distortion "power steering" takes a different play style.
Values? Well, with the prices of 1960s American and British guitars through the roof, collectors and musicians turn to the next-best-thing, and that would be European and Japanese guitars. In general, any made-in-Japan solid-body electric guitar in good cosmetic shape, that's complete and playable, is worth at least $100, and any acoustic-electric, at least twice that. The more pickups it has, the more elaborate the controls, and the more flashy the pickguard, the more it's worth. Same goes for the body and headstock shape. The standard shapes that copy Fender and other manufacturers aren't as desirable as some of the weirder shapes. A Decca solidbody with an unusual body shape, with 3 pickups and an unusual original finish would probably be in the $250-350 range to the right person. An acoustic-electric with the same specs would probably be worth $100 more than that. I've seen some of the exceptional Teisco solidbodies go for $500-600, but that's uncommon. In about 2006, I saw a Teisco (one of their Mosrite copies) from about 1967 that was in flawless condition for sale in an instrument shop in Tokyo for 200,000 Yen (about $1,900). I wouldn't be surprised if it sold for that.
I disagree. Through the years I've owned many amps and many pedals, and played with numerous setups to get different sounds. My absolute favorite setup and sound I have had is my Les Paul straight through my JCM900. At most, I'll add a wah in there. That is my ideal setup. I've played many different styles over the years, and used many techniques. My playing has evolved as I went along, and started taking pedals out of the mix. I think pedals are a great thing, and if you want to use them, you should.

The varying amplified current of the valve is connected through the first coil of wire (primary) and creates a varying magnetic field. The varying magnetic field created by the primary coil, causes electricity to be generated in the second coil of wire, which is wound tightly around the first. Electricity is transferred to the second coil only when the magnetic field is changing, not stationary. The iron core of the transformer keeps the magnetic field contained so little is lost. The transfer is very efficient. The secondary coil is connected directly to the speaker. The reduced secondary voltage is adjusted by the ratio of turns between the 2 coils. Eg 1,000 turns on the primary and 100 turns on the secondary would change the voltage 10:1. Most output transformers have a turn’s ratio of approx 20:1.

I think it's fair to say that we all have a pretty good idea of what reverb is, though there are several ways of emulating it in the studio. Early reverb chambers, plates and springs have now given way to digital solutions, which fall into two main camps: synthetic and convolution. Synthetic reverbs take an algorithmic approach, setting up multiple delays, filters and feedback paths to create a dense reverberation effect similar to what you might hear in a large room. Though these often sound a bit 'larger than life', they've been used on so many hit records that we now tend to accept their sound as being the 'correct' one for pop music production. Most can approximate the sound of rooms, halls, plates and chambers, but in comparison with a real reverberant environment, the early reflections often seem to be too pronounced. The advantage of a synthetic reverb is that the designer can give the user plenty of controls for altering the apparent room size, brightness, decay time and so on.

Learning guitar chords is often one of the first things beginner guitarists do. You only need to know a few popular chords in order to be able to play a huge amount of songs. This beginner’s guitar chords article will provide you with the necessary chords you’ll want to learn for both beginner and intermediate players. Before jumping into learning the chords provided in the guitar chords chart below, I wanted to first explain what a guitar chord actually is. What Is a Guitar Chord? As wikipedia defines it, “a guitar chord is a set of notes played on a guitar”. Although a
I have a Norma single pickup electric guitar with 1 volume and the 3 position tone switch. Someone tried to repair the wiring (w/o soldering) so it didn’t work when I found it. I did some simple wiring/soldering and got it working and the pickup sounds great but I cant figure how to wire it so the tone selector works. Any help or a diagram would be great.
Thanks for posting the cool video. I have a Decca like that one. Its pickups migrated to my #1 guitar, which is a relative from roughly the same era (early 1970’s), a Daimaru (sunburst, jazzmaster / jaguar copy surf guitar body, tremolo, etc.). The Decca now has one Daimaru pickup (I wrecked the other one when I was a teenager — thinking I was going to ‘improve’ it), but otherwise, my Decca looks basically identical to yours — except for it has the original tuners, and I angled the bridge in the 1990’s. The neat sound you can get from one of these particular Deccas is the placement of the bridge pickup, it’s a bit further from the bridge than a lot of other electrics, which gives it a neat, plunky sound to it — as is apparent from your video.
Few non-American guitar brands have meant so much to so many American guitar buffs as Teisco guitars. Indeed, through their mid-’60s connection with the Sears and Roebuck company, many a modern guitar player learned his or her first chops on a Silvertone made in Japan by the Teisco company. Nevertheless, for years Teiscos were the object of ridicule, the penultimate examples of “cheap Japanese guitars” (a reputation more based on cultural chauvinism than objective analysis, truth to tell). Even Dan Forte, who essentially began the category of writing about off-brand guitars (and who has given me many an entertaining moment in my life), chose Teisco Del Rey as his nom de plume, with more than a little tongue-in-cheek humor in the selection, no doubt.
I wish I knew what goes on in there. I'm told it is a simple cut of the laminated neck and then the tone block is glued to the back. I hope it is that simple as I am about to perform some major surgery on my 9 ply neck to acomidate this construction technique . If any body out there can lend some advise on this , please do so I don't turn my bass into a clock!
{ "thumbImageID": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-White/H11149000001000", "defaultDisplayName": "Rogue LX205B 5-String Series III Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pearl White", "sku": "sku:site51278002525864", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-White-1278002525864.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-White/H11149000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Metallic Blue", "sku": "sku:site51278002525867", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Metallic-Blue-1278002525867.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Metallic-Blue/H11149000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Candy Apple Red", "sku": "sku:site51278002525866", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Candy-Apple-Red-1278002525866.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Candy-Apple-Red/H11149000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pearl Black", "sku": "sku:site51278002525878", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-Black-1278002525878.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-Black/H11149000004000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
I think it's fair to say that we all have a pretty good idea of what reverb is, though there are several ways of emulating it in the studio. Early reverb chambers, plates and springs have now given way to digital solutions, which fall into two main camps: synthetic and convolution. Synthetic reverbs take an algorithmic approach, setting up multiple delays, filters and feedback paths to create a dense reverberation effect similar to what you might hear in a large room. Though these often sound a bit 'larger than life', they've been used on so many hit records that we now tend to accept their sound as being the 'correct' one for pop music production. Most can approximate the sound of rooms, halls, plates and chambers, but in comparison with a real reverberant environment, the early reflections often seem to be too pronounced. The advantage of a synthetic reverb is that the designer can give the user plenty of controls for altering the apparent room size, brightness, decay time and so on.
The electric guitar is a staple in the music industry. Over the last several decades, the use of the best electric guitar has evolved across many music genres. The electric guitar has made grand entrances in the likes of Rock, Pop, Hip Hop, and more. Today, it is considered one of the most essential instruments in pushing musical creativity forward. Whether you are a beginner or an expert electric guitar player, the variety of sounds and distinct musical styles will surely take any music genius to the next level. We’ve reviewed electric guitars & compiled a guide on how you can best spend your money on the perfect electric guitar.
In terms of the electronics, Yamaha went with a System 66 piezoelectric platform. The preamp packs a standard three-band EQ couple with a built-in tuner and a flexible mid-range control. Needless to say, it gives you more than enough room to dial in a decent tone. Quality-wise, this might be the best acoustic electric you can get in this price range, period.

A plucked string has many modes of vibration which all occur simultaneously; most of these correspond to overtones or harmonics of the fundamental frequency of the vibrating string. Near the center of the string, the fundamental frequency has the largest amplitude; a pickup at 1/4 of the length of the string will be at the point of maximum amplitude of the second harmonic and at a null point for the fourth harmonic. This position gives a strong, full, mellow tone. A pickup at 1/8 of the length of the string (closer to the bridge) will be at the point of maximum amplitude of the third harmonic, and will also get a lot of the fourth and fifth harmonics. This gives a much brighter tone. The change in tone caused by plucking the string close to the neck versus close to the bridge is based on the same idea: bringing out the harmonics in the string in different proportions. See link to a related article, below.

Bill Collings dropped out of medical school in the early 1970s[3] and instead worked in a machine shop for five years.[4] At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.
On top of that, the Champion 20 offers built-in effects, including reverb, chorus, flanging, delay, auto wah, vibrato, and tremolo. All of these effects can be chosen using a single knob, with an additional FX Level knob to control the mix of the unprocessed sound with the effect. These effects can’t match the flexibility and adjustability of separate effects pedals—for example, with the exceptions of reverb+delay and reverb+chorus, effects can’t be combined—but they can at the very least give beginners an idea of how these effects work. Many guitarists may find the Champion 20’s built-in effects to be all they need.
A Distortion pedal is a must, it really helps bring out those chords, solos and riffs and makes sure they stand out. It gives you the volume jump when you need it and changes the overall sound of your guitar, giving it power and aggression. Of course, you don’t always have to dial in the pedal for bone crushing riffs as a distortion pedal can provide a smoother sound, but at least the option is there!
I liked that the test used identical setups and that the results were captured on a high resolution display. Often the debunkers use either their ears alone (and in a MP3 format as well for us to compare) or an oscilloscope which is a terrible measuring device for real sound because it can only display time and amplitude where the amplitude is a summed view of all the frequencies at the same time. The FFT clearly showed much much more.
i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.

Launch price: $299 / £199 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 22 | Pickups: Alnico V bridge humbucker 2x Alnico V single coils | Controls: Volume, tone (with push-pull coil-split), 5-way selector switch | Hardware: Vintage-style vibrato with block saddle | Left-handed: Yes (Pacifica 112J) | Finish: Natural Satin, Old Violin Sunburst, Raspberry Red, Sonic Blue, Black, Silver Metallic
Electric guitars were originally designed by acoustic guitar makers and instrument manufacturers. Some of the earliest electric guitars adapted hollow-bodied acoustic instruments and used tungsten pickups. The first electrically amplified guitar was designed in 1931 by George Beauchamp, the general manager of the National Guitar Corporation, with Paul Barth, who was vice president.[3] The maple body prototype for the one-piece cast aluminium "frying pan" was built by Harry Watson, factory superintendent of the National Guitar Corporation.[3] Commercial production began in late summer of 1932 by the Ro-Pat-In Corporation (Electro-Patent-Instrument Company), in Los Angeles,[4][5] a partnership of Beauchamp, Adolph Rickenbacker (originally Rickenbacher), and Paul Barth.[6] In 1934, the company was renamed the Rickenbacker Electro Stringed Instrument Company. In that year Beauchamp applied for a United States patent for an Electrical Stringed Musical Instrument and the patent was later issued in 1937.[7][8][9][10]