Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Top Wood: Basswood (Tilia, Linden, Lime) - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 6 In-Line, Reverse - Bridge: Tremolo - Cutaway: Double - Hardware: Black - Pickup Configuration: S-H - Guitar Features: Pickguard - String Instrument Finish: Five Alarm Red, Desert Sun Yellow, Magenta, Black, White
This guitar is based on Loar's U. S. Pat. 2,020,557 (filed 1934, awarded 1935), in which electric amplification is combined with an acoustic guitar body. The design offered a player the option of switching between electric and acoustic amplification, or combining both, with metal posts through the bridge that transfers vibrations from the strings to the bar-armature. With the posts raised, the bridge comes in contact with the soundboard for exclusively acoustic amplification; with the posts lowered to contact the metal bar-armature, both acoustic and electric amplification is engaged, and with the posts lowered completely, the bridge is lifted off of the soundboard and supported only by the bar-armature for exclusively electric amplification. The back of the guitar, made from arched spruce, with two f-shaped soundholes, incorporates another of Loar's ideas, covered more extensively in U. S. Pat. 2,046,331 (filed in 1934 but awarded in 1936), to use the back of the instrument as a second soundboard by transferring bridge pressure from the top.
Solid-state amplifiers incorporating transistors and/or op amps can be made to produce hard clipping. When symmetrical, this adds additional high-amplitude odd harmonics, creating a "dirty" or "gritty" tone.[37] When asymmetrical, it produces both even and odd harmonics. Electronically, this is usually achieved by either amplifying the signal to a point where it is clipped by the DC voltage limitation of the power supply rail, or by clipping the signal with diodes.[citation needed] Many solid-state distortion devices attempt to emulate the sound of overdriven vacuum valves using additional solid-state circuitry. Some amplifiers (notably the Marshall JCM 900) utilize hybrid designs that employ both valve and solid-state components.[citation needed]

Fender has a long history of building amplifiers, so much so that many of the amps we see today still mimic the look and aesthetics of the amps that they built many decades ago. You could also say that many of the amps we have today can trace their roots to the classic Fender amp design. Also impressive is the long list of Fender amplifier users which include Eric Clapton, Jerry Garcia, Brian Setzer, Neil Young, Stevie Ray Vaughn, Eddie Van Halen and many more. For a company with a long legacy and a massive line up of amplifiers, maintaining high rating across the board is quite the feat, but then again, this is to be expected from the company that helped shape the electric guitar sound that we know today. These days, Fender is well represented in the entire amplifier market, from entry level models with amp modeling, to premium modern reproductions of their iconic tube amps.
In the fall of 1954, Daniel started production of solidbody guitars for Sears, under the Silvertone name. He also produced the same guitars under the Danelectro name, sold to other jobbers. These early models didn't have truss rods but had a 3/4" square aluminum tube beginning at the peghead and through the body to the bridge. The bodies were constructed of solid Poplar wood. The Silvertone models were covered with a dark maroon vinyl covering, while the Danelectro models were covered in a whitish tweed material. Both lines came with either 1 or 2 pickups, concealed under a baked melamine pickguard. Concentric stacked tone and volume knobs were used on the two pickup models only. Notably, when both pickups were used together, the tone was much stronger. This was due to wiring the pickups in series, instead of parallel like most other maker's two pickup guitars.
Another unusual bass amp is Ashdown's B-Social combo amp, which the company calls a "desktop amp".[10] The 75 watt combo amp has two 5" speakers, which provide stereo sound. While some keyboard amplifiers and electric guitar amplifiers provide stereo sound through two speakers, this is a rare feature on a bass amp. The B-Social provides Micro USB and Bluetooth 4.0 connections for hooking it up to a desktop computer. The amp is versatile enough to be used for playing bass, playing recorded music or streaming music as a home entertainment centre, or for amplifying video game sound effects.[11] The amp has a special socket for connecting amp and cabinet simulation and effects unit apps which can be downloaded on iPhones and iPads. The amp was called "B-Social" because it has a second input, so that a bassist can jam with another performer. The B-Social's USB audio interface can be connected to Digital Audio Workstations for sound recording.[12]
"I have purchased 15 personalized guitars from the top guitar custom shop. All the guitars have met or exceeded my expectations. Great workmanship and quality work. An exceptional group of people to work with. They are ready to answer your questions or concerns. The one time i had a concern about a guitar they responded immediately and handled the situation more than i expected. I highly recommend this company!" Dr E C Fulcher Jr - Abingdon, Maryland USA.

Make sure it feels comfortable, especially the fretboard and body. Make sure there are no buzzing notes and that the frets are flat and even. Avoid electric guitars with whammy bars as they may be too difficult to tune for beginner guitar players and make the guitar more expensive (maybe one on the next electric guitar you buy). The tuning heads should be easy to tune and stay in place, and try playing the guitar through an amplifier to check for a good sound quality (hopefully no humming or buzzing).

An extremely wise Liverpudlian once said: "Life is what happens to you while you're busy making other plans." Well, we've been busy with life and now, after a few year's hiatus, it's time to present the first phase of our new collection. For your consideration are some truly unique guitars: Silvertones, Danelectros Harmonys, a Supro 60, an Eko Florentine, and many more. Also, did we mention for all you Shagg's fans, there's a pretty stunning Avalon AV-2T. There's more to come very soon, stay tuned. Welcome to!
Description: Body Construction: Solid - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Maple - Frets: 21 - Inlay: Dot - # of Strings: 6 - Headstock: 6 In-Line - Bridge: Fixed - Cutaway: Double - Hardware: Brass, Chrome, 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - Guitar Features: Pickguard - String Instrument Finish: Traditional Violin

Launch price: $1,499 / £1,419 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood/maple (dependent on finish) | Frets: 22 | Pickups: 3x V-Mod Single-Coil Strat | Controls: Volume, neck tone, bridge and middle tone, 5-way selector | Hardware: 2-Point Synchronized vibrato, Fender standard staggered tuners | Left-handed: Yes | Finish: Antique Olive, 3-Color Sunburst, Black, Candy Apple Red, Natural, Olympic White, Sienna Sunburst, Sonic Gray

In more recent years, a diverse cross-section of artists have started to favour Rickenbacker guitars. In 1979, Tom Petty and Mike Campbell of Tom Petty and the Heartbreakers would adopt the Rickenbacker 12-string “toaster” jangle into their records and still use the vintage 1960s models. The post-1960s “Hi-gain” pickup-equipped guitars are associated with The Jam and REM. The “Hi-gain” pickups are well suited to harder spiky pop/rock sounds as well as the classic clean chime.

: Values? Well, with the prices of 1960s American and British guitars through the roof, collectors and musicians turn to the next-best-thing, and that would be European and Japanese guitars. In general, any made-in-Japan solid-body electric guitar in good cosmetic shape, that's complete and playable, is worth at least $100, and any acoustic-electric, at least twice that. The more pickups it has, the more elaborate the controls, and the more flashy the pickguard, the more it's worth. Same goes for the body and headstock shape. The standard shapes that copy Fender and other manufacturers aren't as desirable as some of the weirder shapes. A Decca solidbody with an unusual body shape, with 3 pickups and an unusual original finish would probably be in the $250-350 range to the right person. An acoustic-electric with the same specs would probably be worth $100 more than that. I've seen some of the exceptional Teisco solidbodies go for $500-600, but that's uncommon. In about 2006, I saw a Teisco (one of their Mosrite copies) from about 1967 that was in flawless condition for sale in an instrument shop in Tokyo for 200,000 Yen (about $1,900). I wouldn't be surprised if it sold for that.
Compared to, say, an Epiphone Dot, the Coupe offers a ‘woodier,’ more acoustic timbre. “Sparkly,” “bell-like” and “jangly” are descriptors often associated with the guitar and its stock pair of P-90s, and cranking the gain up elicits more a sizzle than roar. Be careful with the distortion, though—without a center block like those you’ll find on semi-hollows, the Coupe is still fairly susceptible to feedback.
Unassigned maker badge names are AGS, Alex, Andre, Aquila, Asco, Avon, Axiom, Bradley, CG Winner, Clear Sound, CMI, Columbia, Commodore, Cortley, Crestline, Crown, D. Lewis (?), Danelectro, Dynelectron (some), Diplomat, Dixon, Dorado, Eagle, El Degas, Exceltro, Exper, Encore, Fandel, Garzia, Goya, Grant, Grenn, Laguna, LTD, Magnum (?), Maier, Monroe, Marchis, Mark II, Masaaki (?), Matador, Norwood, Palmer, Prairie, President, Rodeo, Sanox, S.G.C., Splender, Stella, Targa, Taro, Voxton by Vox, and Yoshi. Some of these badges are attributed to the importer as the 'maker', which is untrue. It's possible that some of these badges were made by smaller Japanese manufacturers that have faded into history.
Gretsch aggressiveness in the entry level market is at an all time high, churning out a wide selection of affordable alternatives to many of their premium guitar models. Continuing this theme is the Gretsch G5426 Jet Club, which is essentially a more affordable stop-tail piece version of the Electromatic Pro Jet Bigsby above. It features the same chambered body and high quality looks but with a basic humbucker and without a Bigsby.
Standard tuning but with the 6th string dropped one full step. Utilized by bands and/or artists: Radiohead, Avenged Sevenfold, Arrowmont, Kvelertak, Led Zeppelin on "Moby Dick", Jack White on the song "High Ball Stepper", Rage Against the Machine, Prayer for Cleansing, Lamb of God, Underoath, Evanescence, Silverchair, Muse, Skillet, Helmet, Soundgarden, Metallica on songs "All Nightmare Long" and "Just a Bullet Away", Rammstein, Fugazi in some songs, Tool in all their albums (except Prison Sex which is Drop B in standard variation Tuning and Parabol/Parabola which has E dropped to B and A dropped to E), C3 Church on their song Breathe, as well as numerous songs on older albums Stone Temple Pilots in some songs, Audioslave, Filter, Foo Fighters, Porcupine Tree, Incubus in some songs, Guns N' Roses on the title track and "Better" from Chinese Democracy (most of the rest of the album was in E♭ tuning), Black Veil Brides (on the song "Knives and Pens"), The Devil Wears Prada, Nirvana in some songs, Zakk Wylde in some of his projects, Quicksand, Alesana, Eyes Set to Kill, and The Beatles on "Dear Prudence", Iron Maiden on "If Eternity Should Fail", Jorma Kaukonen of Jefferson Airplane on Embryonic Journey from the Surrealistic Pillow album, All Time Low on the biggest part of their discography.

This cutoff is based on the average used price on Reverb over the past year, and while the $1000 cutoff is relatively arbitrary, it is as good a point as any to divide between entry-level gear and more heavy artillery. Here again, we are not combining wattage and cabinet size variations on the same models, which inherently decreases the ranking of any amp series with a multitude of different configurations.
The open strings of a guitar can be tuned to microtonal intervals, however microtonal scales cannot easily be played on a conventional guitar because the frets only allow for a chromatic scale of twelve equally spaced pitches, each a semitone apart. (Certain microtonal scales, particularly quarter tones, can be played on a standard guitar solely by adjusting tunings, but the distance between notes on the scale makes it somewhat impractical.) It is possible to play microtonal scales on a fretless guitar, to convert a fretted guitar into a fretless, or to make a custom neck with a specific microtonal fret spacing.
I have to say I'm really impressed with the Obsidian HSS wiring harness, The build quality is top notch, and the simplicity to install really delivered.It only took a few minutes to connect and be up and running. I love to customise my guitars and love to play around, so having the ability to swap out pickups without a messy soldering iron is fantastic, and the wiring is super clean giving a professional finish. I'll be intending to use the obsidian wiring harness in future project guitars -I highly recommend- Guitar sounds great ( oh did I mention the extra guitars picks too. nice touch)" - Ricci Custom HSS Strat® Wiring
This is why I’m nervous when I see a free guitar plugin that actually wants to replace a guitar, which Cute Emily Guitar attempts to do. Now, Cute Emily is the most guitar-sounding of the bunch, but it also has the least amount of controls. This gives you a relatively singular sound and while I commend Big Cat efforts, I stopped using this free electric guitar plugin faster than I did the others.

It comes in arctic white, fiesta red, black and vintage sunburst, so there’s a healthy level of customization available. Finally, there are three classic Strat single coils, two volume knobs and a tone knob. Accompanying that is a five-way selector switch, so you can dial in your tone and fine tune it with the knobs. It all comes in a really nice package that will feel really good right out of the box. You really can’t go wrong with a classic like this. 
The guitar measures 41 inches in length, and it comes with a 25.75-inch scale and 20 frets for various playing techniques. You also get strong D’Addario strings for reliable performances every time, as well as enclosed die-cast gold tuners, so you never play an off note. This dreadnought guitar features a cutaway so you can easily practice finger techniques on the higher frets.
List of guitar brands that include the most reliable models available. Guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

{ "thumbImageID": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "defaultDisplayName": "Squier Affinity Mini Strat Electric Guitar with Rosewood Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pink", "sku": "sku:site51500000053100", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink-1500000053100.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Torino Red", "sku": "sku:site51500000053099", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red-1500000053099.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red/J86206000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000053098", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black-1500000053098.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black/J86206000001000", "brandName": "Squier", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Guitar amplifiers can also modify the instrument's tone by emphasizing or de-emphasizing certain frequencies, using equalizer controls, which function the same way as the bass and treble knobs on a home hi-fi stereo, and by adding electronic effects; distortion (also called "overdrive") and reverb are commonly available as built-in features. The input of modern guitar amplifiers is a 1/4" jack, which is fed a signal from an electro-magnetic pickup (from an electric guitar) or a piezoelectric pickup (usually from an acoustic guitar) using a patch cord, or a wireless transmitter. For electric guitar players, their choice of guitar amp and the settings they use on the amplifier are a key part of their signature tone or sound. Some guitar players are longtime users of a specific amp brand or model. Guitarists may also use external effects pedals to alter the sound of their tone before the signal reaches the amplifier.

There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings. For a six-string guitar in standard tuning, it may be necessary to drop or omit one or more tones from the chord; this is typically the root or fifth. The layout of notes on the fretboard in standard tuning often forces guitarists to permute the tonal order of notes in a chord.

Fender’s MIM (Made in Mexico) Stratocasters are offered as an affordable option, buyable at about half the rates of their American siblings. Moreover, you can also select your preferred one from among the maple and rosewood fingerboards, SSS or HSS pickup configuration, and color variations. You can also find several models available with Floyd Rose tremolo and pretty tops. For those requiring American Fenders, the American Original Series is available with all essential features.
Considering a brand is only really important to a certain extent. Generally, certain top brands will have a reputation for being better at things than others, but given that most guitar brands now have a very wide offering, it’s really best to consider individual models. It’s worth doing a little extra research in some areas though, because there are interesting brand relationships that mean some more budget guitar brands have actually been designed by premium ones. Epiphone and Squier for instance are more affordable sub-brands of Gibson and Fender respectively, which means that you can often get a very high quality product that’s been made in Taiwan rather than the USA for instance. The Dove Pro is a good example of this.
Entitled Fine Electric Instruments, the 1964 1965 Fender catalogue was circulated from mid 1964, and despite being just eight pages long, contained a large number of guitars, amplifiers and other instruments. This was the first catalogue to show the new Fender Mustang guitar, which was available in normal or 3/4 scale at that time. This catalogue was included in the 1964 annual guitar issue of Down Beat magazine (July), massively increasing the potential readership, both in America and worldwide.

Finally, you’ll want to make sure you have the accessories you need to get up and playing fast. A strap, spare strings (they do break from time to time), and some plectrums are all essentials – and don’t forget an amplifier! You’ll also want a case (preferably hardshell, but soft and padded will do) to store and transport your guitar, and an electric tuner to keep it sounding good. These can all be picked up from your local guitar store, although if you are starting from scratch, you may want to consider a combo kit, which usually offer good value and convenience.

Before buying any guitar you have to fix a budget range, so that later on you do not end up blowing off more money than you actually wanted to. Yes, it is true that buying a guitar can be expensive, but you do not have to burn a hole in your pocket in order to buy one. Just have a price range fixed and then search for the best ones accordingly. You may not find the good ones right at the beginning, but eventually you will definitely find the perfect one that will even last long.

Description: Guitar Type: Acoustic/Electric - Body Size: AEG - Top Wood: Cedar - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Nut Width: 43mm - Fingerboard: Rosewood - Binding: Ivoroid - Frets: 21 - # of Strings: 6 - String Type: Bronze - Scale Length: 25.4" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Rosette: Abalone - Hardware: Chrome, Diecast Tuners - Pickups: Fishman Sonicore - EQ/Preamp: Ibanez AEQ-SP1 - String Instrument Finish: Low Gloss natural
At first this may seem trivial, but a little experimentation reveals that each effect reacts very differently depending on how the original signal has been altered by previous effects in the signal chain. Initially, this can seem rather frustrating; a pedal that sounds awesome on its own can turn your sound into a real mess when combined thoughtlessly with other effects. I’m going to go into the basics of signal flow and cover the fundamentals of setting up a great sounding pedal board. As you would expect, there isn’t any one “correct” way of doing things. You may find that changing the order gives you a completely unique sound, and that’s great. However, if you’re sorting it all out for the first time, this is a good way to start ordering your pedalboard.
Australian singer Frank Ifield also owned and used a Maton guitar, which he later had fitted with a custom-made scratch plate, made in the shape of a map of Australia. Frank gave this instrument to his guitarist Ray Brett when he returned to Australia, and it has been featured on an episode of the BBC programmeAntiques Roadshow. Although these guitars are now normally worth around UK£2,000, expert Bunny Campione valued Ifield’s guitar at between UK£10,000 and UK£15,000, because Ifield had used it in songs featured in a compilation album alongside The Beatles‘ first two singles.[2]
Traditional sets can sometimes feature vastly different tensions between strings, causing players to compensate with altered techniques. New York string icon D’Addario set out to even the playing field with its Balanced Tension XL sets, which boast mathematically equalised resistance for a similar feel from string to string. That means even effort when bending, strumming, plucking and slapping, and even improved dynamic control.

Okay, getting down to brass tax - how do the effects and amp models sound? In a word, great! It’s not secret that Boss makes some fantastic pedals, many that have reached legendary status over the years. It’s nice knowing that you’re getting a multi-effects pedal from a brand that has really dominated the guitar and bass effects field. Boss uses some technology terms like COSM modeling and MDP (Multi-Dimensional Processing) which sound fancy but might not mean much to many guitarists. Truth is, given that this is a digital unit, some things sound really great, and some sound not so great. The overdrives are hit and miss. This user review hits the nail on the head:

i play a squire jazz bass, it has always sounded good and played very good. wanted to " jazz it up" a bit so i was searching for new pickups and control pots and stumbled on your site.. first thing i thought was oh wow, how freaking cool is that.. after ALOT of searching, i purchased the obsidian wire control pots for a jazz bass as well as the control plate since mine looked pretty worn.. i also got the v-mod pickups from fender. install was just as smooth as advertised, especially since i had never even cracked open a bass before, ever.. done in less than 30 minutes ( as far as the wiring ) the pickguard had to be removed and cut to fit, and the old knobs didn't fit ( totally expected ) it is now done and i cannot believe the difference in tone and clarity.... all i can say is your products are innovative and really much more than i expected... thank you..." - Bob Vintage Jazz Bass® Wiring
{"id": "H91419", "categoryId":"site5AAH", "name":"Artstar AS153 Semi-Hollow Electric Guitar", "pageUrl":"/Ibanez/Artstar-AS153-Semi-Hollow-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "msrp":"1,377.76", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"879.99", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"15", "brand":"Ibanez", "reviewStarImageUrl": "", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"7", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LAAA,site5LFMIC,site5HBA", "stickerText": "Top Rated", "isVintage": "0", "outletonly": "2", "checksum":"637145126000", "priceVisibility": "1", "itemType": "New"}

Some large combo amps and large speaker cabinets have ball-bearing-mounted caster wheels to make it easier to move them. All combo amplifiers and speaker cabinets have some types of carry handles, either a folding handle on the top or recessed handles on the sides. There are two types of recessed handles: some equipment has folding, spring-loaded metal handles, with the spring holding the handle flush against the chassis until it is pulled out for use; the second type is handles that are non-moving, and which are flush with the surface of the amp/cab, but with a hollow area behind the handle for the hand to go. In both cases, the handle does not project out beyond the amp/cab, preventing the handle from catching on items during transportation and/or being damaged.
Excellent explanation! One thing that no one has touched on, yet is the physics of the high frequency components (mentioned above). When you clamp a string at both ends and pluck it it will have a fundamental frequency of waving back and forth based on a) it's length b) it's thickness and c) how tightly it's stretched. All wavering strings, though will have additional waverings. These are referred to as overtones. The first overtone will be a doubling of the frequency and the next a trippleing and so forth. Each of these overtone frequencies contribute to the rich, complex sound of the instrument. Here's a good explanation with pictures. Note the location of the frequency nodes in relation to the placement of the pickups.
The Effect: Vibrato effect, often mistaken for a tremolo, is the type of guitar effect that alters the pitch of your signal. The result is very similar to that which you get when you operate the tremolo bar on your guitar. There are different types of vibratos out there, but the most common division is between analog and digital units. Analog vibratos are known for their clarity and organic feel that comes from analog pitch shifting.
The final stage of our ME-80 signal chain is delay and reverb. These ambience effects create the illusion of playing in a different space. It makes the most sense to have them at the end of your effects chain. If you think about it in real life terms, a sound is fully formed it goes out into any space. As a side note, delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.

Sal-Stein-Uprights-UltraCompact-JNv2.0   A great set with all three pianos (Yamaha C5 Salamanders, Steinways and Uprights) available to play at various brightness levels plus optional resonance.  The pianos have been compacted a little and the Salamanders have 6 carefully selected full range velocity layers rather than 15 but the sound is not compromised.  All samples are still very long (just not needlessly long). These are already included in the Nice-Keys-CompletePlus and Nice-Keys-Extreme.
Sturdily constructed with a solid basswood body, bolted maple neck and rosewood fretboard, this black electric guitar has an attractive glossy finish. The list of add-ons include a high quality Hollinger BC-08 practice Amplifier (10 Amp), string-winder cable, strap, gig bag and pitch-pipe picks. The intonation as well as playability of the Davison full size electric guitar has been enhanced owing to its single, high quality humbucker pickup, chrome bridge system and diecast tuners. Last but not the least, the practice amp is suitably equipped with a headphones jack for noise-free practice sessions, as well as an overdrive mode for cool distortions!
One last time we must put aside our expensive tastes and put up with the “economy” version of a guitar that is actually much nicer. The full-scale rendition of Steve Vai’s guitar is, in my opinion, legitimately worth every one of the nearly 300,000 pennies it costs. Per the Ibanez web site, there are a lot of Vai Signature models you can pick from:
Depending on the type of music you're playing, you may actually want your compressor pedal at the end of your chain. For example, if you're playing country music, a compressor pedal at the end of the chain squashes everything, regardless of the effects you're using. With rock music, on the other hand, it typically works better right after the filter pedals.
{ "thumbImageID": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "defaultDisplayName": "Rogue Starter Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blue Burst", "sku": "sku:site51275425409510", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Blue-Burst-1275425409510.gc", "skuImageId": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut", "sku": "sku:site51275776901291", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Walnut-1275776901291.gc", "skuImageId": "Starter-Acoustic-Guitar-Walnut/519266000115000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pink", "sku": "sku:site51275776901306", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Pink-1275776901306.gc", "skuImageId": "Starter-Acoustic-Guitar-Pink/519266000218000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901295", "price": "49.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Black-1275776901295.gc", "skuImageId": "Starter-Acoustic-Guitar-Black/519266000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Matte Natural", "sku": "sku:site51275425409512", "price": "59.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Matte-Natural-1275425409512.gc", "skuImageId": "Starter-Acoustic-Guitar-Matte-Natural/519266000049000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red Burst", "sku": "sku:site51275776901310", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Red-Burst-1275776901310.gc", "skuImageId": "Starter-Acoustic-Guitar-Red-Burst/519266000224000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
But the question remains, was that environment good for the artists or for the equipment? Think of it this way: experienced chefs know very well the value of a seasoned pan or grill. Flip on any show from the Food Network and you’ll see cooks bragging about their 30-year-old griddle and how it imparts an amazing flavor to their corned beef hash. Preparing food leaves behind actual physical substances, unlike immaterial sound waves, so that comparison doesn’t work exactly. But the dirt and dust and grime could certainly effect the equipment. In a similar way, we have to ask ourselves, was that dirty studio, then, a source of inspiration or were the dirty, beer-smelling microphones actually improving the music? Regardless, the studio imbued the recording with an undeniable quality. Many guitar nuts can identify a particular instrument while listening to a song. Recording experts can do the same thing with studios.
As the title suggests, solid body electric guitars don't have a chamber or hole the way that an acoustic guitar does; instead, they're made of solid wood. These are the most common type of guitars that you’ll find in shops or online stores. They're perfect for a wide range of musical situations. These guitars rely on the wood quality and their components to output sound. Below we’ll highlight four famous types of solid body guitars.
A basic triode valve (tube) contains a cathode, a plate and a grid. When a positive voltage is applied to the plate, a current of negatively charged electrons flows to it from the heated cathode through the grid. This increases the voltage of the audio signal, amplifying its volume. The grid regulates the extent to which plate voltage is increased. A small negative voltage applied to the grid causes a large decrease in plate voltage.[42]
As a guitarist with a complete understanding of the vintage instruments he worked on, Novak wasn't completely comfortable with what any one instrument was capable of delivering. He wanted to combine all the features of his old favorites while adding design twists that would give him everything he was looking for in an electric guitar. This led to the invention of his patented fanned-fret fingerboard, which gives an instrument combined scale lengths.
Position 2 (outside coils, parallel connection): this one is more exciting because all poles do something. Pole 1 connects bridge pickup coil tap to ground, effectively splitting the bridge pickup. Pole 2 connects bridge pickup hot lead to the output. Pole 3 connects neck pickup coil tap to pole 4 which connects it to the output. What we end up with is a coil from bridge pickup coil tap to hot lead and a coil from neck pickup ground to the coil tap. Because of the way poles 2 and 4 are connected, these two coils will be paralleled.

Launch price: $1,949 / £1,639 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 21 | Pickups: 3x Pure Vintage '65 Gray-Bottom Single-Coil Strat | Controls: Volume, neck tone, bridge/middle tone | Hardware: Pure Vintage 6-saddle Synchronized vibrato, Pure Vintage Single Line 'Fender Deluxe' tuners | Left-handed: Yes | Finish: Olympic White, 3-Color Sunburst, Candy Apple Red
This said, the gig bag itself looks like it is top quality, with properly cushioned straps so you can wear it on your back if you need to, making it a great option for carrying it across town or campus. The only thing is, the listing says the guitar is lightweight, but at 16 lbs, some people would not say this is “light.” At least not compared with some of the more inexpensive models in this review list. After all, the back and sides of this instrument are made of mahogany, which is a hard wood. This makes the guitar more durable, but not easy for some to lift.
Silvertones were guitars sold by Sears but manufactured by five main companies: Danelectro, Harmony, National-Dobro (Supro/Valco), Kay, and Teisco. These companies were called "jobbers" because they were contracted (jobbed out) to make guitars for Sears. They also produced guitars under their own brand names. In almost all cases the guitars manufactured for Sears were identical to models sold directly by the manufacturers with only a logo or color change.
List of bass guitar brands that include the most popular and reliable models available. There is a lot to consider when looking for the perfect bass guitar for you. The body style, neck, scale length, tuning machines, intonation, fingerboard, number of frets, pickups and type of wood all make a difference in how your bass guitar sounds and feels in your hand. The most popular bass guitars include those from major manufacturers of musical instruments, including Fender, Yamaha, Warwick and more. Use this comparison of bass guitar brands as a guide when researching the best bass makers.
Here we have a cool vintage piece. Made in USA and is highly Possible this is a Gibson Archtop. Great Original condition make this a great find...this one is a Solid 8.5/10 condition. This one still has the original tuners and pick guard too. The neck is straight and the frets are still OK...and wow what a supprise this one plays great!..nice vintage repairs or damages just natural play wear and dings etc associated with a true vintage player....EZ on the eyes see the great detailed bindings! and wow this baby sounds very nice...great for Jazz .
First, remove the knobs of the pots that you want to replace. Some knobs are held in by setscrews. Look around the shaft of the knob to see if there is a screw head then unscrew the screw and remove the knob. Most knob are mounted on split shaft pots. There are no setscrews on a split shaft pot. Friction and pressure hold the knobs on the shafts in this case. You can pull the knob directly off the shaft of the pot since there is no screw. If the knob is stuck on the shaft, I usually use heavy gauges guitar picks to try to pry up the knob. You may also wrap a thin rag around the bottom of the knob and pull the knob off the shaft. Regardless how you get the knob off, be careful not to dent or ruin the finish on the top of the guitar. It is easy to rip the knob off of the pot and accidentally drop it on the guitar. Once the knob is removed, you can unscrew and remove the nut on the top of the shaft.
Over the years, Muddy has famously criticized EM, but around the time of its release, he seemed to have a different attitude. Blues fans claim he always hated it but the following proves otherwise. Six months after EM, the same line-up reassembled and recorded a sequel called After The Rain (1969) that still has distortion on it but isn't as overtly psychedelic. If Muddy hadn't liked EM, he would have had enough say at Chess to dismiss a follow-up, but instead he went along with it. In fact, Pete Cosey says "I'll never forget as soon as I walked into the studio for the follow-up and Muddy saw me he threw his arms around me and said ‘Hey, how you doing, boy, play some of that stuff you played on the last album." After The Rain's songs alternate between Chicago blues and distorted guitar tracks. There's a marked difference on After The Rain with Paul Oscher (harmonica) and Otis Spann (piano) from Muddy's old band joining in and Muddy playing lead guitar on several tracks. On the Chicago blues tracks, more prominent bass and drums put the music into a rock setting, but it's Muddy's slide guitar playing that highlights them. Muddy really let's loose with some striking, tenseful slide work on tracks like "Honey Bee," "Rollin and Tumblin" and "Blues and Trouble" that just send a chill through your bones. On the other side of the album, the guitar on "Ramblin Mind" lashes and cries out in dense fuzz while on "Bottom of the Sea," the fuzzy leads seem to hang in the air along with an innovative bowed bass and harmonious organ in the background (the bowed bass is also used on the record on "I am The Blues").

ESP LTD is a big name when it comes to the production of electric guitars and has been making quality instruments for over 40 years. The ESP LTD EC-256 Intermediate Electric Guitar is just another example of the genius of ESP LTD. The body of the guitar is mahogany and the neck and fretboard are made out of rosewood. There is also a TOM bridge and a tailpiece attached to this guitar. The pickups of this guitar are the ESP designed LH-150 set. It comes in two color options, black and metallic gold.

There’s a common belief that certain strings are better for beginners than others. While nylon strings can be easier on beginner’s fingers, the main thing that matters when it comes to guitar strings is the style of music you are planning to play, because the difference in feel and sound between the two materials is significant – even for a beginner.
New Born has a great riff that starts at about 1:00. It is repeated a few more times during the rest of the song. To play this riff like Matthew Bellamy does, you'll need to tune down one of your strings. Click the button below to find out which string and how to tune it. Oh, and if you look closely at the video there are some clues there for how to play it!
According to the laws of electromagnetism, whenever an iron coil is moved inside a magnetic field, an electric potential is generated in the iron coil. This arrangement is known as an electromagnet. An electric guitar uses the same principle for generating an electric signal using small electromagnets which is then rectified and amplified to reach an appropriate audible sound level.
It’s quite interesting to look into the psychology behind our behavior when it comes to how much we pay for things in connection with how good we think they are. In one experiment, restaurant guests got served the same dish. Some of them payed a high price for their dish and some a normal lunch price. Did the guests think that their food tasted differently? Yes, they did. The guests who payed the high price thought that their food was much better than the people who got it for cheap.
The combination of Slash’s rough-edged pyrotechnic solos and Izzy’s raw power chords and off-kilter rhythms resulted in an unusual mish-mash with massive crossover appeal that metalheads, punks, glam poseurs, pop fans and classic rockers loved alike. Slash and Izzy also made vintage guitars cool again, strapping on Gibson Les Pauls, Telecasters and ES-175 hollowbodies when most guitarists were playing DayGlo superstrats, pointy metal weapons or minimalist headstock-less Stein-bortions.
There’s a common belief that certain strings are better for beginners than others. While nylon strings can be easier on beginner’s fingers, the main thing that matters when it comes to guitar strings is the style of music you are planning to play, because the difference in feel and sound between the two materials is significant – even for a beginner.

yeah, i used to play the vht straight up sometimes. that amp was tonal sweetness, and had a tank reverb. if i dime it, i can get away with playing alot of stuff on the ac4. but i like having a little chorus for certain things, and i do a couple of songs that i would like to have a rotary pedal for, and although i'm not big on reverb, i don't mind using a touch of delay in place of it. if i did have a wah, i'd use it as a tone knob. oh, and i want a harmonizer. specifically, the eventide pitchfactor.
Though Dennis Hartnett took good care of his ViVi-Tone instruments (mandola NMM 10809, mandocello NMM 10810, and this guitar), all three show signs of extensive use. Indentations on the bar-armature and wear to the screw-ends of the posts on the guitar pickup indicate that Hartnett also used the instrument for electric-only amplification, in addition to the electric/acoustic set up in which he left it. Hartnett's guitar is preserved with an amplifier (NMM 10812) by Webster Electric Company of Racine, Wisconsin, and an accompanying foot pedal.
Fender Pro Series Stratocaster and Telecaster Case   New from$119.99In Stockor 4 payments of $30 FREE 2-DAY SHIPPING Epiphone E519 Hardshell Case for 335-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Epiphone Hardshell Case for Les Paul-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Fender Deluxe Molded Case for Stratocaster or Telecaster   New from$149.99In Stockor 4 payments of $37.50 FREE 2-DAY SHIPPING See All Electric Guitar Cases
Fall 1954: both models have 2 volume and tone knobs, $39.95 and $59.95 respectively. The single cutaway bodies were made of solid Poplar wood, and are known as the "peanut" body shape at 11.25" wide. Then used a solid aluminum bar running from the peghead to the bridge for strength. "Coke bottle" pegheads are used that are 5/8" wider across the two "E" tuners than the later "Coke bottle" peghead shape. This model was also available under the Silvertone brand name with the "lightening bolt" peghead.
A real hall-of-famer from Ibanez, which displays true rock style and lightning-fast playability in an affordable beginner-friendly package. With the classic Superstrat body in a range of colors, this RG is made of solid basswood and features a slick, thin Wizard III maple neck, with rosewood fretboard and 24 jumbo frets, making it superb for chugging powerchords and fast soloing.
Kingston guitars were built in Japan and imported into the U.S. by Jack Westheimer, who was an early pioneer of importing and distributing Japanese instruments during the late 1950s and 1960s. At first, Kingston guitar models were limited to acoustics that were similar in style to Harmony’s Stella line. Westheimer’s electric line at the time was built in Japan by Teisco and branded as such before the name changed to Teisco Del Ray. By the mid-1960s, however, Westheimer was no longer importing Teisco (or Teisco Del Ray) guitars, and he turned his attention back to the Kingston trademark, but added electric guitars this time.
I have been using it since 3 years. It is not even costly. Its good looking and I think its even better than gibson. It even very easy to tune for it has a very good sound quality. More over it has a beautiful look like a guitar. Even a beginner should be advised to buy this guitar for it cost a minimum of 3000 rs. So as it is less costly and more quality it's the best for me. I even like lakewood but its cost is just my dream.

Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: Some great info on that site, you should have a browse around!
I know a lot of you out there fancy yourself as “tinkerers”, and many of you may actually be quite good at handling repair work to your own instruments, but I’ve always been more of the kind who loves to find a good repair person. Number one, if the repairer doesn’t do the right job, or there are problems with the work they did, they have to own up to it, and make sure it’s done right until you are fully satisfied. Then of course, if they are actually a selected and accredited repair person for a given guitar company, it’s even better to bring them the guitar, rather than trying to take matters into your own hands.

Simon Stockhausen began his stellar musical career at the age of five. His multi-faceted and wide-ranging oeuvre has since embraced all manner of projects and styles, including jazz and improvisational collaborations, countless compositions for ensembles and chamber groups as well as work for major European theatre companies and orchestras including the Hamburg and Berlin Philharmonic Orchestras. In 2009 he further extended the range of his musical endeavors with the creation of a sound design company through which he produces sounds, patches and libraries for software synths and plug-ins, serving sound designers, musicians and post production professionals.

At some point in this period, the pickups were changed to humbuckers with metal side covers and a see-through grey insert on top. I’ve estimated this changeover took place in about 1973 or ’74, but this is uncertain. Certainly it had been accomplished by ’76, when the next reference appears, so it could have been later (at the time of the Merson/Univox split in ’75?).
John Scofield (b 1951) is an American jazz guitarist and composer, who has played and collaborated with Miles Davis, Joe Henderson, Charles Mingus, Joey DeFrancesco, Herbie Hancock, Pat Metheny, Bill Frisell, Pat Martino, Mavis Staples, Phil Lesh, Billy Cobham, Medeski Martin & Wood, George Duke, Jaco Pastorius, John Mayer, and many other artists. Scofield had played a 1981 Ibanez AS-200 as his main guitar for over 20 years.[26]
SOLD OUT! Takamine EF406 RARE Here we have a RARE and GORGEOUS 1999 limited Edition Takamine acoustic-electric guitar, model EF-406. This instrument is a PREMIUM example of a New York or also called a Parlor guitar and is a Hand Crafted in Japan model an amazing example of Japans high Quality workmanship & fit & finish and is truly just as good as it gets. As you can see from the pictures, it is simply gorgeous to look at. It has a classic slotted headstock with Top Quality gold open gears and gold tuners with Pearl buttons. The Top- Back & sides are all a High grade choice AAAA FLAMED KOA with natural Koa color (there is no stain)and none was needed to bring out the AWESOME grain patterns of this Rare Native Hawaiian Wood. The top sound hole apears to be bound or painted and inside looks same as out /all Takamine internet information leeds to say the tops on this model is solid however we can not guarantee this as fact. The electronics are a GRAPH-EX pre-amp system: peizo transducer, with "exciter," volume, bass, treble, and mid controls. It comes with a deluxe, plush hardh shell case, note: In he picture close up of the ack of the headstock you may notice a dull spot running threw the center over the made in Japan tag area this is just a spot of waxed area that was inadvertently missed and not rubbed out... it is fine this guitar is in Excellent used condition. .
Schecter Guitar Research is a company that has really established themselves as one of the best guitar brands out there in recent years. Many of their guitars are focused on the heavy metal market, but players of any genre can find a Schecter that meets their needs. With superb craftsmanship and high-end appointments you’d expect to find on much more expensive guitars, they are also among the best values in the guitar world.

Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.
While the other digital amplifiers we tried (the Blackstone ID:Core Stereo 10 V2 and the Line 6 Spider Classic 15) offered a similarly wide range of good sounds, most of our panelists preferred the Champion 20 simply because it was easier to use. Lynn Shipley Sokolow preferred the simplicity of non-digital amps such as the Vox Pathfinder 10, but she said, “The Fender is the best of the digitals because it’s easy to understand the controls.”
Make sure you have a sharp pair of wire cutters and a pair of those pointy nose pliers for bending and cutting component leads. Don’t forget solder too. There are a whole bunch of solder specifications covering materials, size, process etc. You’ll need rosin core solder. It comes in different thicknesses. 0.031” diameter is a common size, and will work for most pedal projects. Solder is normally sold in reels by weight. A 1/4lb reel will be enough to last a good few pedal projects. Lastly, get lead free, no clean solder. Although not strictly necessary for personal projects, lead-free solder is common now and safer. No clean, means that you can leave the flux residue behind without having to clean it off, and it won’t damage your board.
Now, there are some basic terms in the electric guitar lingo that you need to be aware of. Below are some of the terms that you need to know before you go out and research about different electric guitars. But if you are musically inept, there are some ways you can compete with the guitar guy. If you learn some points about the electric guitar, such as terms and mechanics of the instrument, you can impress your friends and possibly even will be the guy holding the guitar at your next dinner party.

Lunes-Domingo de 9AM a 7PM EST Customize Search Results for Your Location change location SitemapView Our SitemapContact UsBlogBy EmailPlace a Purchase OrderReturn RequestLet Us Help YouFAQsProduct ConditionShipping InformationPayment OptionsOrder VerificationReturnsNotice of AccessibilityAffiliate ProgramJoin Our Affiliate Program Follow zZounds on:
Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.

This is a very general question, but I will attempt to answer. I'll not get into brands, buy what "feels" right and has a good tone. If, a beginner, a good acoustic can be bought new for $200.00 - $300.00. If, you are an experienced or professional player, "The Sky is the Limit" only limited by how much you want to spend. My first guitar was used, and I paid $50.00. Now, I play a Gibson Song Writer, $3500.00. Hope this helps.
The Fender Squier Bullet Stratocaster is one of the most popular low budget electric guitars on the market. For what money can buy around this price, it’s good value. The quality of the hardware, tuners and pickups can’t go up against the original Fender Stratocaster, but it still sounds really nice and feels good for playing, practicing and some first gigs. A perfect entry-level guitar that is worth the investment.
Here I'm going to look at all of the different kinds of pedal available on the market. Hopefully this will help act as an effects pedal guide to beginners who are looking to buy their first pedal, and just don't know where to start. We'll look at the name of the effect, what it does, and an example of the pedal (mostly Boss and MXR pedals as they're probably the best known). Oh, and I won't be looking at any of the niche boutique pedals; that would take ages!

One day I went over to hang out with a friend on Long Island’s prestigious, luxurious north shore. He was also an amateur, aspiring, guitarist, and perhaps slightly more advanced than me – after all, he wrote a solo, even if it didn’t belong to a song yet. But he was very excited when I arrived and wanted to show me something cool in the family room. When I stepped inside, what did I see strewn about the floor but a whole bunch of effects pedals surrounding his electric guitar like a battalion about to march on and conquer a fierce enemy.
In the 1950s, several guitarists experimented with producing distortion by deliberately overdriving amplifiers. These included Goree Carter,[3] Joe Hill Louis,[4][5] Elmore James,[6] Ike Turner,[7] Willie Johnson,[8] Pat Hare,[9] Guitar Slim,[10] Chuck Berry,[11] Johnny Burnette,[8] and Link Wray.[12] In the early 1960s, surf rock guitarist Dick Dale worked closely with Fender to produce custom made amplifiers,[13] including the first 100-watt guitar amplifier.[14] He pushed the limits of electric amplification technology, helping to develop new equipment that was capable of producing "thick, clearly defined tones" at "previously undreamed-of volumes."[13]

While there’s still 9 more guitars to talk about on this list, you really can’t go wrong with stopping here, at the Les Paul Standard. This guitar is one of the most sought-after electrics in its price range. If you’ve ever played a Les Paul Epiphone before, you know what we’re talking about. Besides being a legendary guitar invented by the artist, inventor, and guitarist, Les Paul, this guitar also has what it takes to be legit, such as ProBucker-2™ and ProBucker-3™ pickups with coil-tapping. You can find this guitar for literally one dollar under $500 at most stores. 

Hello all. I have a brand name guitar, which was very popular in the 1980s, and still is being manufactured under Gibson today. I didn't see it in your list though. It's a Kramer Stagemaster. It's a beautiful guitar, which I may never part with. Strat-Style with Neck-Thru-Body & Floyd Rose Trem. The headstock states Kramer American. These were passed off as American made models, however I understand that they were actually made in Japan. The style and appointments are strikingly similar to my Ibanez Proline 2550 from the same era, which has 'Crafted in Japan' written on the headstock. I know that Kramer made a lot of American made guitars out of Neptune, New Jersey, however these were all bolt-on neck guitars. Does anyone know where these Neck-Thru Kramers were made, or why they have American printed on the headstock if they are not tues American made guitars?
by pedalhaven  @airbag3333  has a seriously stacked board! Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 
{"eVar4":"shop: books sheet music and media","eVar5":"shop: books sheet music and media: tablature","pageName":"[gc] shop: books sheet music and media: tablature","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media: tablature","prop1":"[gc] shop: books sheet music and media","evar51":"default: united states","prop10":"category","prop11":"tablature","prop5":"[gc] shop: books sheet music and media: tablature","prop6":"[gc] shop: books sheet music and media: tablature","prop3":"[gc] shop: books sheet music and media: tablature","prop4":"[gc] shop: books sheet music and media: tablature","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
When you're learning your instrument, having Books, Sheet Music & Media on hand is absolutely invaluable. It doesn't matter if you're a first time player or an old pro, this type of literature is going to help you to enhance your skills and become a better player overall. Think of having books, sheet music & media at your disposal like having the world's most diverse roster of teachers at your disposal 24 hours a day, seven days a week. By being able to learn on your own schedule, you'll find yourself playing new chords, progressions and songs in no time. So which books, sheet music & media are right for you? Well, as you can imagine, that's just going to be a matter of skill level and personal preference. If you're looking for a serious method book that will give you a solid basis in guitar technique, be sure to check out the Hal Leonard Guitar Method Complete Edition. This book and CD combo is designed to help anyone learn to play their acoustic or electric guitar. With convenient teaching ideas and fantastic audio assistance from Greg Koch, this set will help you cover all of your bases.
Kramer Guitars is the manufacturer of electric guitars & basses originated from America. Inearly’s off origination in 1970’s, they produced aluminum necked electric guitar& basses & in later 1980’s they started producing wooden-necked guitars catering to hard rock and heavy metal musicians. This is the brand of guitar that challenges the quality of guitars made by Gibson. Made of maple wood and aluminum inlays, this makes one of the finest make of bass and electric guitars. These are highest priced electric guitar which starts from 90,000 to 1.5lacs. These are one of the most powerful ranges of electric guitars used by professional musicians.

Bonnie Raitt: features an alder body, a narrow C-shape maple neck with a late 1960s large headstock, rosewood fretboard, 9.5″ radius and 22 medium jumbo frets. Other refinements included a 3-ply white shell pickguard, three Texas Special single-coils with 5-way switching and American Vintage hardware. Available in 3-color sunburst and desert sunset. Discontinued in 2000.
Modulation stompboxes like our BF-3 Flanger should be after the tone-producing effects like distortion, wah, etc. so they can process and modify the tone built by the pedals before it. If you put it before the distortion, then you are distorting the sound of the flanger. Maybe that’s what you’re after, but in general, put the BF-3 and other modulation effects after the tone-shaping (and noise–producing) pedals. And then there are the ambience effects: delay and reverb. As we discussed earlier, reverb—and sometimes delay, depending on the space—is the last thing that happens before the sound reaches your ears in a physical space, so these go last. Delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.
Where can you find one? My guess is that FIDELITY was a housebrand (like Holiday or Silvertone), and these might be Valcos or some other maker. But I have since seen 2 or 3 of them on Ebay, not going for too much money. Also, there are several other brands (and no-brands) that look much like these, so keep your eyes peeled, don’t pay too much, and score a little gem that will have other guitar players saying “what the hell is that” and have your significant other shaking his or her head when the UPS/Fedex people come knocking.
Six full steps (one octave) down from standard tuning. The Low E has the same fundamental frequency as a bass guitar, essentially the same standard tuning as a bass guitar but with a high B and E added to mimic a regular guitar. This tuning is used on the Fender Bass VI and similar instruments. Notably used by John Lennon with The Beatles, Robert Smith of The Cure and Jack Bruce of Cream. In his early days with Ronnie Hawkins, future Band bassist Rick Danko was also seen with a Fender Bass VI. This is the tuning Earth used on their seminal drone doom album, Earth 2. Also used in some Doom Metal and Sludge Metal bands such as Thou.
Everyone has an opinion on Crate amplifiers. Some guitarists are strong supporters, if for no other reason than a fond recollection of a Crate as one of their first amps. Others aren’t as impressed. While it’s true that many Crate models are geared toward beginners and intermediate guitarists, they also have plenty of pro-quality gear in their lineup.
• What they’re made of: Frets are typically made of nickel-silver or nickel-steel alloys, or – less often – brass, copper alloy or stainless steel. The harder and more dense the material, with stainless at the top of the scale and soft nickel at the bottom, the brighter and more cutting the notes played on a guitar should sound. Most manufacturers use nickel alloys because the metal is soft and easy to work with. At this point, most guitarists’ ears have been developed to the sound of nickel as well, and most guitar buyers have a tendency to balk at the unfamiliar when shopping for instruments.
Fusion players such as John McLaughlin adopted the fluid, powerful sound of rock guitarists such as Clapton and Jimi Hendrix. McLaughlin was a master innovator, incorporating hard jazz with the new sounds of Clapton, Hendrix, Beck and others. McLaughlin later formed the Mahavishnu Orchestra, an historically important fusion band that played to sold out venues in the early 1970s and as a result, produced an endless progeny of fusion guitarist. Guitarists such as Pat Martino, Al Di Meola, Larry Coryell, John Abercrombie, John Scofield and Mike Stern (the latter two both alumni of the Miles Davis band) fashioned a new language for the guitar which introduced jazz to a new generation of fans. Like the rock-blues icons that preceded them, fusion guitarists usually played their solid body instruments through stadium rock-style amplification, and signal processing "effects" such as simulated distortion, wah-wah, octave splitters, compression, and flange pedals. They also simply turned up to full volume in order to create natural overdrive such as the blues rock players.

Dan Erlewine first saw this Tele back in the 1960s, before Mike Bloomfield recorded with it on Bob Dylan’s Highway 61 Revisited album. That was also before Bloomfield and Dylan were booed for going electric at the 1965 Newport Folk Festival. And before Bloomfield recorded the first Paul Butterfield Blues Band album with this guitar. There’s a lot of history in this Telecaster!
Few instruments are as versatile as the electric guitar. Widely heard in most types of music, the guitar's sound can be customized in virtually limitless ways to suit the genre and the player's individual style. Multi effects pedals put all of that personalization within your reach, allowing you to change your soundstage with the push of a button while you play. Many guitarists achieve multiple effects by chaining pedals together. This gives the ability to mix and match different effects to create unique combinations, but it can also be a source of frustration to keep track of so many pedals. A multi-effects pedal avoids this confusion by converting the mess of individual pedals into one discrete unit that's easier not only to use, but also to transport from venue to venue. Multi effects pedals can offer hundreds of onboard distortion, filter, modulation and dynamics effects to transform the sounds of your guitar. With as many or as few features as you prefer, the selection offers a multi pedal for every guitarist's needs. If simplicity is your thing, a basic stompbox can provide a handful of effects with minimal complications. On the other end of the spectrum, you can satisfy your inner technophile with a cutting-edge digital pedal featuring MIDI support and USB connectivity so you can save seemingly limitless library of effects. There are three things to look for in your ideal multi effects pedal: the range of available effects and features, the ruggedness of its construction and the available inputs and outputs. The more effects that are supported, the more the pedal has to offer to your sound. The more durable it is, the more the pedal can withstand being moved from venue to venue. And the more connection options it has, the more versatile it is for studio recording or connecting to additional stompboxes and accessories. Whether you're playing hard rock or smooth jazz, the range of tone alterations offered by a multi effects pedals enables you to deliver a personalized sound that complements your band and your musical style. There are two things that get guitarists into the history books: developing their skills to perfection and crafting their own distinct sound. With a multi effects pedal, you've got the gear you need to start shaping the tones you aspire to be remembered by.
Some bridges have a lock position and at this point should be engaged. Other floating bridges will need to be stabilized by using pieces of wood fitted inside the cavity (accessed from the back of the body) to prevent the tremolo block from moving. Vintage Fender-style tremolo bridges can be stabilized by fully tightening the spring tension screws. Whatever method is used, the bridge must sit as we will want it to when we are done with the set-up procedure- parallel to and nearly flush with the top- so care must be taken at this stage to get the position of the bridge right.
Hybrid picking is a technique that makes use of both the pick and the remaining pick hand fingers. On the surface, it’s more versatile than playing with just with a pick. Digging deeper, you’ll learn hybrid picking has the same, yet different mojo than fingerpicking as well. At the end of the day, this technique is a very powerful one that will enable you to play things that would be otherwise impossible. Be it oddly accented phrases to wide interval licks to more intricate chordal ideas, hybrid picking opens up in credible options.
Thanks, guys....well, I don't think I'll be able to play any Agiles but I'll try and get my hands on some Epi's and give them a whirl. How are the stock pickups on both? Definitely in need of a swap? I had an Epi Les Paul an eon ago and don't recall liking the stock pickups, but I was also in highschool then and knew nothing about tone. Also, a quick look at Ebay indicates that any Epi SG in a color other than black or cherry will be hard to come by...
Normal people define cool as laid-back, excellent or highly skilled, but most guitarists define cool as Jimmy Page circa 1975 in a black velvet bellbottom suit decorated with embroidered dragons, playing a Les Paul slung down to his knees. As the musical mastermind behind Led Zeppelin, one of the greatest rock bands of all time, Page elevated the guitar riff to an art form, crafting orchestrated overdubbed parts that bludgeoned listeners like the hammer of the gods.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: ovation","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"ovation","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Guitar brands such as Antoria shared some Ibanez guitar designs. The Antoria guitar brand was managed by JT Coppock Leeds Ltd England. CSL was a brand name managed by Charles Summerfield Ltd England. Maurice Summerfield of the Charles Summerfield Ltd company contributed some design ideas to Hoshino Gakki and also imported Ibanez and CSL guitars into the UK with Hoshino Gakki cooperation from 1964-1987.[3] The Maxxas brand name came about because Hoshino Gakki thought that the guitar did not fit in with the Ibanez model range and was therefore named Maxxas by Rich Lasner from Hoshino USA [4].
I can't have them above Guild. Their usa made stuff and vintage acoustics are gems no doubt, but they set 7 or 8th for me. I just wish they still made American made acoustics. Like guild they are a hallmark name in the acoustic guitar world. Unlike guild they aren't being made in america. Guild and their supporters really lucked out with the Cordoba purchase. They're bringing Guild back where they belong. On top. Now if someone would do the same for Washburn. I really thought the usa made stuff would get back to greatness with that solo deluxe warren haynes model, but they stopped American made guitars all together which is a shame.
I gave some relief to the guitar, just enough to be able to move a business card on the 8th fret. I think the truss rod adjustment is ok now. Strangely it's still buzzing. I compared the height of the bridge to my Navigator N-LP-380LTD and i have the same height on the RLG-120 the same. The string that buzzes the most is the D string!!! E and A string buzz too but less than the D. Don't know if i want to raise the bridge more. G B E are ok! Don't know if the D slot on the nut is too low. Seems like the slots on the nut on my guitar are higher than the ones on your Burny. Don't know what to do. Frets seem even. Any chance it's the saddles or something? Do they play a role on buzzing. I will raise the bridge tomorrow morning and see how it goes. Any idea what should be a standard string height on these guitars? Lets say height on 1st fret, 5th fret, 8th fret, 12th fret, 16th fret, 22nd fret. Can we say that? Can you tell me yours to check with mine?
{ "thumbImageID": "GSR200-4-String-Electric-Bass-Pearl-White/519524000051000", "defaultDisplayName": "Ibanez GSR200 4-String Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pearl White", "sku": "sku:site51275776902009", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Pearl-White-1275776902009.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Pearl-White/519524000051000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51275776901776", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Jewel-Blue-1275776901776.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Jewel-Blue/519524000085000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Red", "sku": "sku:site51275425410355", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Transparent-Red-1275425410355.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Transparent-Red/519524000016000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901322", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Bass-Black-1275776901322.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Black/519524000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
TonePad – provides ready-to-use layouts and circuit boards for effects and amplifier projects to the do-it-yourself music community. All layouts are provided free of charge and are subject to the limitations set forth on their legal page. Parts are available from Small Bear Electronics, and ready-made PCBs for many projects are now available directly through tonepad.
After putting 13 inexpensive guitars to the test for 24 hours with a panel of instructors, students, musicians, and a guitar repair person, we think the Squier by Fender HSS Bullet Strat is the best electric guitar for beginners. It’s comfortable and reasonably light in weight, it played well right out of the box (and even better when properly set up), and its complement of pickups and controls offer enough variation of tone that beginners will get a good start on finding their own sound, regardless of the styles of music they’re interested in.
Being a grand auditorium body shape guitar, it’s a little smaller than the typical dreadnought size that we’ve covered several times on our list. That’s no bad thing, and allows this guitar to be nice and flexible, especially when combined with the ‘Expression’ electronics system that allows for some good tonal customisation. Match up with an effective wireless instrument system.

The Jeff Beck Oxblood is available in limited numbers. The first 50 of these historic guitars were aged at Gibson Custom to look like Beck’s original, then signed, numbered and played by Beck himself. The next 100 guitars were prepared with Gibson Custom’s V.O.S. finish, bringing the total run to 150 instruments. Each one also comes with a standard Gibson Custom case.
Chorus: Since this is still a repeating effect that has a tempo component, the chorus of a song tends to be a tough fit.Verse: The lower intensity and high emotion of most verses in Christian worship leaves room for some tremolo effect, depending on what the guitar is doing.Bridge: Short solos during the bridge are an ideal place for the tremolo effect, particularly if it hasn’t been used in other parts of the song.
@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.
Thanks, guys....well, I don't think I'll be able to play any Agiles but I'll try and get my hands on some Epi's and give them a whirl. How are the stock pickups on both? Definitely in need of a swap? I had an Epi Les Paul an eon ago and don't recall liking the stock pickups, but I was also in highschool then and knew nothing about tone. Also, a quick look at Ebay indicates that any Epi SG in a color other than black or cherry will be hard to come by...
{"id": "113503875", "categoryId":"site5AAG", "name":"Vintage Palmer Electric Solid Body Electric Guitar", "pageUrl":"/Used/Palmer/Vintage-Palmer-Electric-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"", "priceMin":"", "priceMax":"", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Palmer", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "1", "outletonly": "", "checksum":"", "priceVisibility": "", "itemType": "Vintage"}
While these sum up the most significant Gibson tone woods, other species do occasionally contribute to the brew. Swamp ash lends the Les Paul Studio Swamp Ash a degree of twangy sweetness and a round, slightly scooped midrange, while the most common Gibson fingerboard woods, rosewood and ebony, even make their mark on the frequency spectrum. Rosewood generally helps to add a certain thickness and creaminess to the tone—warming up the voice of a maple neck, or adding depth and cohesiveness to that of a mahogany neck—while an ebony fingerboard, long considered an upmarket option, contributes tightness, brightness, and a quick attack.

: Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.
The inlays are the little shapes that are installed in the instruments neck/fretboard. Inlays do not make a significant difference in the sound of the instrument. They come in various shapes and materials. Inlays allow a player to quickly see where certain positions are located on the fretboard. They are also a great way to decorate, or personalize an instrument. Choose among our existing inlays designs, or send us a drawing of your own designs. Some popular inlay designs are band logos, initials, corporate brand logos, or tribal designs.
Well, sanding the bridge isn't really a standard procedure, haha. Only, to be able to get the (in my case adjustable) saddle low enough without the strings hitting the bridge I had to sand it down. This Landola is an old, but not particularly valuable guitar, so I decided to try that (and it had been severly damaged to begin with, I bought it like that just to have a go at trying to repair it)
: : "Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired

too many to the point their incredibly over rated for me personally, there's a world outside of Gibson that cost a fracton as much and will blow peoples heads off. I have a custom 7 string I bought off craigslist someone made that's worth about 500 dollars because I didnt pay for some name on the headstock and so on. All my friends from blues and jazz lovers to metal would rather play my guitar. more frets for soloing than their les pauls active pickups a Floyd rose locking tuners 4 big reasons right there
A Volume pedal is a volume potentiometer that is tilted forward or back by foot. A volume pedal enables a musician to adjust the volume of their instrument while they are performing. Volume pedals can also be used to make the guitar's notes or chords fade in and out. This allows the percussive plucking of the strings to be softened or eliminated entirely, imparting a human-vocal sound. Volume pedals are also widely used with pedal steel guitars in country music. It has also been used to great effect in rock music; the Pat McGee Band's live version of "Can't Miss What You Never Had" on General Admission illustrates what the pedal is capable of. Some volume pedals are:

However, when I’m building a guitar, there’s a myriad of small adjustments I can make to steer the instrument on a desired trajectory. These micro mods are interactive with each other and, depending upon the combination, offer a wide variety of sonic outcomes. But these little mods can also be applied to existing guitars—your guitars—in any number of permutations and to great affect. Let’s take a look at five mods that are easy enough for most players to try.

It should be noted that some bridge assemblies have pre-set, non-adjustable saddle pieces. The Gibson "tune-o-matic" bridge is just one example. On these bridges you will have an overall height adjustment post on either side of the bridge. For these bridges, measure the height at the 12th fret for the low and high "E" strings and make your height adjustment for each side at the respective post. The other string heights will be defined by the bridge assembly.
On my bench today, a partscaster with a Hamer Slammer neck, Carvin Rail in the bridge, Ry Cooder Dearmond middle, and PRS P90 in the neck. Wasn’t quite right (throbby) with the usual 3 250K pots and an 022 orange drop (i know, i know, but they aren’t that expensive). So, i went with 500K master vol, 500K master tone (found an old ceramic PRS 022 cap too), and an acme blender pot (neck and bridge) in the last position. Now it’s fun. Lots of variety in positions 1, 2, 4, & 5. 3 knobs and a whammy and she’s done.

So I'm babysitting this guitar for a broke person and I happen to be not so much broke and he left this guitar over here. Not that I'd take advantage of anyone, but after playing it, I wouldn't mind having it. I went through 3 pages of google and didn't really find any info on that or ebay. It's a P37. It's a dread. Looks pretty cheap judging by the ornamentation. It's painted black with decal inlays and all that classy stuff. I haven't measured it but the fretboard is really wide, the neck is really skinny and D shaped. I think it has a shorter scale length too... and the finish looks thin. It seems old because the saddle barely pokes out and the action is still rather high but then the soundboard doesn't belly out. The bridge is raised all around the saddle though, so it could just be a strange bridge setup. It is rather loud. It says "quality handcrafted guitars" under the company name in the soundhole, not sure if I believe it, but the totally different neck, action and volume level than what I'm used to, makes it pretty fun to play.
You can choose between tube amps, hybrids, or solid state models. The first are generally viewed as the grooviest. The latter are cheaper, more reliable, and require less maintenance. And the hybrids are often a practical compromise. (Keep in mind that watt for watt, tube amps are much louder than their solid state cousins with similar wattage ratings.)
If you have any comments about what you see in this web site,  we would love to hear from you.  Our E-Mail address is below.  Of course we are particularly anxious to talk to you about our repair services or our handcrafted guitars.  But  --  don't let that limit you.  We would love to hear your ideas about any guitar related topic.  (One such e-mail led to the harp guitar project)   We WILL respond, generally quite soon.    If you have a question that you would like to see addressed in our Q& A page, let us know.  Our E-Mail Address is:
Graph Tech Ratio Locking Guitar Tuners (3+3)   New from$118.96In Stockor 4 payments of $29.74 FREE 2-DAY SHIPPING Babicz Full Contact Strat Tremolo   New from$142.95In Stockor 4 payments of $35.74 Free Ground Shipping Gibson Vintage Tuners/Tuning Machines (Set of 6)   New from$89.99In Stockor 4 payments of $22.50 FREE 2-DAY SHIPPING Graph Tech Ratio Locking Guitar Tuners (6 In Line)   New from$118.96In Stockor 4 payments of $29.74 Free Ground Shipping See All Electric Guitar Parts