Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.
To start off our list (albeit rather difficult to choose a specific guitar first), let’s take a look at the Fender Telecaster, a high-quality electric guitar for the musician out there who is looking to improve their amateur status to accomplished guitarist. With the clear tone and quality range that the Fender brand is known to famously provide, the Telecaster is equipped with shielded body cavities meant to limit reverberation and focus in on the individual notes. The dual single-coil pickups allow the musician to vary between sharp tones and strong treble, providing a unique sound to fit various genres of interest. The flat surface of the of the fingerboard makes it easy to switch between notes and chords, while the alder wood used for the body of the guitar provides and even and bright sound. With a ‘C’ shaped design meant for comfort for long wear use, the Fender Telecaster is one of the best electric guitars for the money. The sound? Very classic, biting, and clear. You’ll have to hear for yourself in this Telecaster video, since we can’t really find adjectives to truly portray this beauty.

as cool as it sounds to say that robert johnson has influenced everyone since him, directly or indirectly, is just nonsense. sure he was a legend in his own right; but a lot of that has to do with his life being shrouded in mystery. yes, he has influenced some players, way back when, but there were so many more players influenced by electric blues; chicago and texas blues, not delta blues. i understand he was somewhat of an innovator, and that is very important, but i think so called ‘music critics’ have over-blown it a bit in the reverence department for fear of being labeled un-hip. dave marsh, the ‘rolling stone’ critic is a perfect example. he claims johnson as one of the most gifted players of all time. but he dislikes david lee roth, singer in ‘van halen’, so right away edward van halen, guitarist in that group is marginalized with: “the basic 12 bar-blues on the louie-louie thump theme” to describe his playing. lol. to sum it up, whenever a critic uses the phrase ’12 bar blues’, you can pretty much assume he has no clue about what he talking about….best wishes.

The construction allows the soundwaves to resonate freely within the body’s hollow airspace as well as around the violin-style F-holes and throughout the solid glue joints. Everything – from the body wood and construction to the neck wood and pitch – contributes to the tone of the 2019 Gibson ES-335 Figured guitar. This model boasts impressive depth and sustain in addition to an exceptional resonance that you can feel through the guitar’s body.
It would be great if we could be born with all our favorite music already memorized. But we're only human, so we don't get that luxury - if we want to know a song, we have to learn it! The process starts with reference materials, so don't wait to start building up a repertoire of your own favorites. Add the tablature to your collection and make sure to practice, and you'll be playing like your favorite guitar heroes soon enough.
If you are a beginner then you probably don't know what a ‘floating tremolo' is. Have a look at Floyd Rose, who made the first models. If you are looking at a guitar that has little tuners on the bridge, then it's probably a floating tremolo. For a beginner, they are a total pain in the butt. They are very hard to tune and a real pain to change strings. The cheaper ones go out of tune a lot too. If you know why you want one, then fine, but locking tremolos on budget instruments are usually rubbish, so stay clear of those for now!
Chorus – This is the subtlest type of modulation effect. It does exactly what its name suggests, making it sound as though multiple instruments are all playing in unison. The effect could be compared to running a signal through two amps at once and setting one on a slight delay; in fact, that’s how many artists created chorus effects before these pedals were commonplace.
Well, sanding the bridge isn't really a standard procedure, haha. Only, to be able to get the (in my case adjustable) saddle low enough without the strings hitting the bridge I had to sand it down. This Landola is an old, but not particularly valuable guitar, so I decided to try that (and it had been severly damaged to begin with, I bought it like that just to have a go at trying to repair it)

First, remove the knobs of the pots that you want to replace. Some knobs are held in by setscrews. Look around the shaft of the knob to see if there is a screw head then unscrew the screw and remove the knob. Most knob are mounted on split shaft pots. There are no setscrews on a split shaft pot. Friction and pressure hold the knobs on the shafts in this case. You can pull the knob directly off the shaft of the pot since there is no screw. If the knob is stuck on the shaft, I usually use heavy gauges guitar picks to try to pry up the knob. You may also wrap a thin rag around the bottom of the knob and pull the knob off the shaft. Regardless how you get the knob off, be careful not to dent or ruin the finish on the top of the guitar. It is easy to rip the knob off of the pot and accidentally drop it on the guitar. Once the knob is removed, you can unscrew and remove the nut on the top of the shaft.
The two mini Les Pauls are also illustrated in ’60s Bizarre Guitars. These were the J-1 and TG-54, slab-bodied solidbody electrics with bolt-on necks. Both had typical Teisco three-and-three headstocks, with a point or hump in the center not unlike Kay guitars, but slightly more rounded. They had rosewood ‘boards with large white dots, except for two small dots at the octave.
Beyond specific favoured mics, a number of engineers also mention more general principles when choosing pairs of mics for guitar recording. Jim Scott and Stephen Street both mention using a 'cheap' or 'bad' mic with a good mic (both give the SM57+U87 combination as an example). "Between the two you can find the ideal sound," remarks Jim, "and you can get brightness and fullness."
There is something special about musical instruments of a certain age. Guitars built from the mid 1950s until the late 1970s are generally held in high esteem; techniques and materials, particularly pre-1970 were vastly superior to today's 'mass-produced' standards. But is a vintage guitar really much different to a modern day equivalent? People often say wood is wood, but this is simply not the case. Centuries old trees that were regularly harvested for guitar manufacture in the 1950s are now protected, and it is these old trees with close grains and unbeatable tonal qualities that make the very best guitars. With rainforests rapidly diminishing their protection can only be a good thing. But it does mean that good quality older guitars, perhaps with a few modern upgrades can make some of the very best instruments available. What's more, much of the painstaking attention to detail lavished upon fine old jazz guitars by special order/custom departments and aimed at serious guitarists has been replaced by the continual churning out of 'limited editions', aimed at serious collectors. Whether these rare, but ultimately not-so-special guitars will be quite so desirable in 30 years time remains to be seen.
We will use the remaining pole to switch tone pots. Typical strat wiring has two tone controls – one for middle and one for neck pickup. We want to switch neck/middle tone control on when neck/middle pickup is on. To do this, common terminal of the second pole is connected to the common terminal on the first pole (pickup output) and neck and middle terminals of the second pole are connected to their respective pots. When neck pickup is on, the second pole will switch the output to the neck tone control as intended. What happens in position 4 (both neck and middle pickups on)? Both pots will be switched on and will be in parallel. Moving any tone pot would change the overall resistance to the tone cap and change the tone. The result is below:
Teisco first began importing guitars to the United States under their own brand in 1960. In 1964, the company then switched the name of their U.S. brand to Teisco Del Rey. The company was then sold in 1967, and the Teisco brand name stopped being used for guitars sold in the United States in 1969. Guitars were still sold under the Teisco name in Japan until 1977.
Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
The wonders of digital delay arrived on the pedalboard in the early 1980s with what seemed massive capabilities of long delays, clean signal reproductions, and the endless fun of one, two, or up to 16 seconds of looping delay. In many cases, in the early days, reproductions weren’t really all that clean (or were cleaner than analog, but colder and harsher too), and many delays were prone to digital distortion if pushed, or poor resolution on the decay of the signal. Even so, the techno-power of the new technology stamped all over the bones of the old analog delay units, and for a time threatened to bury them entirely.
There are of course, other buttons and positions featured on guitars. BB king’s Lucille had a switch to toggle different values for R11 (thus going from moody chords to punchy ‘Lead’ with a finger and no need for extra gear). Advanced guitars may have phase and antiphase switches for humbuckers or dual pickups. The jackson 5 Telecaster I think is an example as it has both a phase and anti-phase wiring on their pickup selector.

You can trace all things loud and riff-y right back to the Kinks' Dave Davies, starting with the fantastically simple power chords of "You Really Got Me," which he recorded at age 17 – setting off a run of proto-metal singles from "All Day and All of the Night" to "Till the End of the Day." Davies, who created the distortion on "You Really Got Me" by slicing an amp speaker with a razor, has laughed off claims that it was actually played by an uncredited Jimmy Page: "Who'd want to play a solo that crazy, anyway? Only Dave Davies could do that."
Finally the ease and portability of the small amp will allow you so much more flexibility with when and where you can practice. Just weighing a couple of pounds is already a great advantage over the rest of the amps available on the market. And being able to take it on road trips, travel trips, backpacking trips (for a bit of extra buck, we all have thought of doing it) means you can practice anywhere, any time. Small storage requirement means a great storing capability where you don’t have to worry about taking up too much space in your tiny room or apartment. It is great stuff, honestly.
This processor is pretty good quality, unfortunately not too many parameters on the effects and you can only use one effect at a time, and some prefixed combo of 2 effects (if i remember correctly 10 different options). If you need it for reverb, or slight delay, tremolo or acoustic simulator its pretty cool, not able to add exact tempo on delay or tremolo though. Sound quality is very good, 24 bit A/D and D/A so no loss there either, and you also have stereo (same effect options on both though) and balanced and unbalanced outputs (if you use unbalanced the signal goes to both outputs so you also have the balanced output if needed). For the money is definitely the best option, imagine that a reverb pedal cost the same money (just reverb) if you have a controller it will fit on your gear. I am using it with ... full review
For guitarists who must have original-era Strat® sound, look and feel, the Classic Series '60s Stratocaster Lacquer epitomizes the instrument during its second decade, when musicians used it to conjure and create electrifying sounds never before imagined or experienced. With authentic features including a nitrocellulose lacquer finish in classic Fiesta Red, everything about it takes you back to a wildly creative time when rock music came into its own—from surf to psychedelia and more—and players started to discover in earnest just what a phenomenal instrument the Stratocaster really was.
This company specializes in guitars meant for heavy metal and hard rock lovers. It is the proud manufacturer of some of the most outstanding designs in the history of metal such as Warlock, Bich, Virgin, and Mockingbird. It molded and influenced hard rock and thrash revolution of the 1980s. It is a great choice if you are looking for some edgy designs for your guitar. The guitars are available in 6, 7, or 8-string models that are suitable for players of all genres. Their recent introduction was the Villain series that has incredible designs and has a body of basswood or mahogany.
Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.
Here for you is a beautiful Vintage 1964 Epiphone Frontier FT-110 acoustic guitar. This guitar is 100% original and comes along with it's original hard shell case. The guitar plays and sounds just great. These Epiphone guitars were made with a full 25 1/2" scale. The sound is just outstanding and the playability is fantastic. If you have any questions, feel free to either email us at or call .

The Fender T Bucket is a great choice for beginner guitarists looking for a great sounding entry level acoustic. It is frequently the top choice for new guitarists looking for a an affordable acoustic guitar. Many owners site it’s ease of playability as one of its greatest attributes. It is available in 3 different color combinations: 3-Color Sunburst, Moonlight Burst, and Trans Cherry Burst. It is made of maple wood. It has a preamp installed, making it an acoustic electric. It is our top pick for the best acoustic electric under $500. It is a great choice for beginners.

Add your vote to this list of the top guitarists ever and help to pick the best guitar player in the history of music. These roock, jazz, blues guitarists have all had long careers filled with success and failure. Some are still jamming out today, which other rock stars died too young, before their talents could be fully appreciated. Now is your chance to give the best guitar players in the world some recognition.

Last fall, Ubisoft released a new version. But Rocksmith 2014 is considered a replacement rather than an update: The company is trying to rebrand the franchise not as a game but as a teaching tool. The box bears a fat label proclaiming "The fastest way to learn guitar," and Ubisoft launched an ad campaign promising that Rocksmith 2014 could teach prospective shredders to play guitar or bass in just 60 days.
Unfortunately, National’s line of instruments was not well diversified and, as demand for the expensive and hard-to-manufacture tri-cone guitars began to slip, the company realized that it would need to produce instruments with a lower production cost if it was going to succeed against rival manufacturers. Dissatisfaction with what John Dopyera felt was mismanagement led him to resign from National in January 1929, and he subsequently formed the Dobro Manufacturing Corporation, later called Dobro Corporation, Ltd, and began to manufacture his own line of resonator-equipped instruments (dobros). Patent infringement disagreements between National and Dobro led to a lawsuit in 1929 with Dobro suing National for $2,000,000 in damages. Problems within National’s management as well as pressure from the deepening Great Depression led to a production slowdown at National, and this ultimately resulted in part of the company’s fractured management structure organizing support for George Beauchamp’s newest project: the development of a fully electric guitar.[5]
Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
As obvious as it sounds, a tuner (or tuning pedal) is fundamental for your rig. It can also act as a mute switch for changing guitars between songs. These days there are many smartphone apps for tuning your guitar – as well as clip-on tuners – but when you need precision and a clear visual indication of the pitch of your strings, nothing beats a good old tuning pedal. The Boss TU-3 is a classic tuning pedal with lots of useful settings – alternatively, you can check out the CPT-20 by Harley Benton which features true bypass connections and a super large LCD display. Need a smaller footprint? Try the Mooer Baby Tuner!

OK, I’ve put a new set of strings on now. We’re now going to carry out the following steps, just like we did in the general electric guitar setup post. 1. Check and adjust neck bow (how straight the neck is) 2. Check and adjust saddle height 3. Check and adjust the intonation (how far back or forward the saddles need to sit at the bridge to keep your guitar as in tune as possible no matter what fret you’re playing)
This list would have been incomplete without us mentioning the Shure SM57-X2U. Because it is a plug and play device, as it uses USB connectivity, this microphone enables its user to record itself/herself while jamming to his/her favorite songs.  As its manufacturer claims this unit is capable of offering a frequency response that is tailored for vocals. What is more, the model also has brightened midrange as well as bass roll off.
The AC15C1X is a modern take on the venerable AC15, with improved reliability and built-in effects. Vox's familiar clean and overdriven tone is ever present, courtesy of its three 12AX7 preamp tubes and two EL84 power tubes that drive a 12" Celestion Alnico Blue speaker - a speaker that many Rock and Blues players prefer. The amp has a dedicated Top Boost input for those who want Vox' distinct jangly tone. Finally, it comes with tremolo and reverb effect to add space and texture to your guitar tone.
Heritage Guitars, founded in 1985 by four long-time Gibson employees when Gibson relocated to Nashville, continues to build guitars in the original factory at 225 Parsons Street inKalamazoo, Michigan. Many of their models evoke memories of Gibson’s late-1950s/early-1960s “golden years.” The H-150 and H-157 are reminiscent of the original Les Paul and Les Paul Custom, while the H-535 is a modern version of the Gibson ES-335.
Among other things, they’re extremely reliable, sound great and built like tanks, so you can stomp on them for years and they’ll never let you down. However, collecting them all will cost an absolute fortune. Fortunately, the team at Boss have put together a couple of options for those who want a world of Boss effects pedals at their feet. One option is the Boss ME-80 Multi Effects Processor Pedal.
List of bass guitar brands that include the most popular and reliable models available. There is a lot to consider when looking for the perfect bass guitar for you. The body style, neck, scale length, tuning machines, intonation, fingerboard, number of frets, pickups and type of wood all make a difference in how your bass guitar sounds and feels in your hand. The most popular bass guitars include those from major manufacturers of musical instruments, including Fender, Yamaha, Warwick and more. Use this comparison of bass guitar brands as a guide when researching the best bass makers.
1963 D-28e. This model is a paradox. Martin took a great guitar with great flattop tone, and then added DeArmond pickups and knobs to the top. This ruined the tone (a flattop develops most of its tone from the vibrating top). And the DeArmond pickups don't amplify the acoustic properties of the guitar. So you end up with a electric guitar sound, while playing a flattop. Because of this, the value for D-28e's is really low. Some people go to the extreme of re-topping this model. This essentially gives you a vintage Brazilian rosewood D-28, but with a new top. A double edge sword of originality versus usability. Martin made only 284 D-28e's from 1959 to 1964, before giving up on the model. Rare, but for very good reason (no one wanted them, then or today!).
Try different gauge strings. As you know, guitarists can be creatures of habit. But heavier strings can help both your tone and fingering strength, while lighter strings may suit bigger bends. Experiment! Billy F Gibbons has the thickest tone but his top E is only a .007. Stevie Ray Vaughan’s top E was a .013. Changing string gauge may just bring out your best inner-self.

Many people "re-amp" direct guitar tracks recorded to a DAW using amp-modeling software, with good results. Plug-ins are wonderfully suited to the virtual  recording environment, allowing for fast access to a plethora of modeling amplifier and speaker cabinet combinations, hence tones, effectively replacing a roomful of amps, cabs and microphones. Programming the virtual amplifier is the same as tweaking the knobs on the real thing, and the same is true for programming software dynamics and effects processors in relation to their hardware equivalents. As the realism and sophistication of modeling technology continue to develop, so does the viability of virtual re-amping as a production technique.

WahWah ('Filter' category): What's a guitar rack without a Wah? Cubase's is really quite good: not only can you vary the band‑pass filter frequency, you can set high‑ and low‑frequency limits, and the Q at those limits. The frequency responds to host automation, but if you want to do real‑time pedalling, the WahWah shows up as a destination in any inserted MIDI track, so you just need a MIDI foot controller. Because insert four comes before the amp simulator, adding a wah there more faithfully duplicates the traditional rock wah sound, where guitarists patched it between the guitar and (usually overdriven) amp. The filter changes thus occur before distortion, which gives a very different sound compared to placing it after distortion. For more emphasis on the wah sound, you could remove the StereoDelay or StereoEnhancer effect, and place the WahWah in one of those slots instead.

On the extreme end of things, adding a lot of reverb to your tone can create large, expansive soundscapes where the notes are less distinct and everything forms one carpet of background sound. Reverb pedals often have a number of controls, from the most basic knobs controlling the volume of the effect (known as “mix”, or how much reverb is mixed into your guitar signal) and the length each note reverberates for (known as “decay”), to more versatile pedals that have controls for different kinds of reverb such as “small room”, “plate” and “arena”.
Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.
Since real knobs occupy space, this multi-effects processor is quite bulky, a welcome compromise that makes it easier to setup and adjust on the fly. The pedal comes with 59 effects and includes 9 amp models that feature Boss' COSM technology, the standard tech that they now employ on many of their effects and amps. You can combine up to 8 of these to craft your preferred tones, which you can then save into its 36 user presets. Other features include a built-in tuner, a 38-second looper and the ability to record your guitar sound directly to a computer via USB.
Leslie West (real name: Leslie Weinstein) first made his mark in mid-Sixties garage rock, with the Vagrants' meaty cover of Otis Redding's "Respect." By 1969, West was the heavy vengeance in the Cream-like quartet Mountain. On songs like the 1970 hit "Mississippi Queen," West played roughened blues lines with deceiving facility and an R&B flair, through a black forest of stressed-amp distortion. "The riffs were incredible," says Dave Davies. "He could play flashy, intricate phrases. But he wasn't a look-at-me guy. He played with feel."
Microphonic Pickups: Generally this is more of a problem with covered humbuckers, and more often than not it is caused by vibration of the cover itself. The easiest way to determine if this is the cause is to remove the cover. Typically there are two solder points which need to be de-soldered. If the microphonic condition goes away, you have four options. The first is to leave the cover off. This will affect the tone if the metal cover is magnetic, otherwise it will not. However, the cover does provide protection for the pickup and I'd advise leaving it, the pickup was designed to have a cover. Second is to have the pickup wax potted, this involves setting up a wax pot, and there is risk of damage to the pickup. Third is to apply a layer of silicoln inside the cover and seat the pickup in the cover before it dries making sure not to push it all out, but getting it up around the sides of the pickup. This is safe, easy and effective, but makes a mess of the pickup for future repair. (not a big concern IMO) The fourth option is to do a partial wax potting. Get some parafin from the grocery store. Boil a small pan of water then remove it from the heat. Place a chunk of wax in the cover press the wax into the holes to prevent water getting into the cover, and hold the cover on the surface of the water with a pair of tongs.As the wax softens spread it around and up the sides with a spoon. Resoften the wax until you can easily seat the pickup in the cover. This is much safer and easier than true wax potting.
DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.
Some early Valco instruments continued to make it into the marketing pipeline – early on, at least. Probably as a sign of the increasing difficulty in getting product, the Spring/Summer 1942 Sears catalog sported a full complement of Supro guitars, essentially the ’41 line, all labeled with the newly-chosen Sears brand name, Silvertone. Shown in the ’42 Sears catalog were the Supro Capitan and Supro Rio, now renamed the Silvertone Crest (carved torch logo) and Silvertone Spanish (no logo), respectively. The Capitan had a standard trapeze tailpiece rather than the Dobro variety, with permanent cord coming out of the top of the lower bout!
Twelve and fourteen fret steel string models from the mid 1920's to 1944 are the most collectible of all Martin instruments. They have excellent craftsmenship, sound, and playability, and these model are of great interest to collectors and players. Some musicians prefer the sound and feel of 12 fret models, and these are close in value to 14 fret models of the same size and period. The larger size 14 fret 000 and "D" sizes from the 1930's are considered by most collectors and musicians to represent the golden era of the flat top Martin. Note war-time models (1941 to 1944) aren't quite as desirable as the 1930's models. Lack of materials, manpower, and general social uncertainty during the war contributed to this.
At the beginning of the Teisco saga, Teisco instruments were primarily built for domestic consumption in Japan. The early guitars were fairly high quality by contemporary Japanese standards. As the ’60s dawned, Teisco increasingly got caught up in the export market, and by the mid-’60s were major players in the low-end or beginner arena, with instruments sold primarily by mass merchandisers such as Sears and at discount department stores which were rapidly developing at the time. It was mainly in this latter niche that Teisco guitars are known in the U.S. In order to give this narrative some structure, I’ve divided the Teisco history into four basic periods: I-Gibsonia; II-Frumpy Fender-ama; III-A New Spectrum of Originality; and IV-Copydelia.
Now that we covered the basic features, let’s talk about what really counts: the built-in effects, amp models, and usability. For better or for worse, people tend to compare multi-effects units with the experience and sound you get from owning a pedalboard full of individual pedals. Well, great news: the consensus is that the Zoom G3X feels a lot like using individual stompboxes; more so than any other multi-effects unit on the market. Zoom really nailed it when it comes to making an intuitive interface. If you look at the layout, you’ll notice 3 “stompbox-style” sections side by side, each with a little display and on/off footswitch. These are meant to feel like 3 guitar pedals next to each other. They’re technically 3 slots which can each hold an effect or an amp model. The Zoom has 6 slots total (you can scroll left and right to access them), and all 6 can be used at once. You’ve got LOTS of choices to shape your tone: 94 effects and 22 amp and cabinet models. Any type of effect you can dream up, the Zoom G3X has you covered. Tremolo, vibrato, compressors, filters, overdrives are all available, and many of the effects simulate popular pedals like the Tube Screamer, EHX Big Muff, Pro Co RAT, Boss DS-1, and the list goes on and on. Same goes for the amp modeling - you can emulate a Marshall, Fender, Orange, Vox, etc. and pair up different amp models with various cabinet models. You can make your effect chain in whatever order you want, which is great for the beginner who is figuring out pedal order for the first time, and the veteran who wants to experiment with unique pedal combos. From a user review:

My first Custom was a Charvel/Jackson Star body with a custom white paint with bullet holes and dripping blood from the holes ! My friend and Guitar teacher Randy Rhoads helped me get started on the right track in 1980 ,before I was playing in clubs and headlining shows later in the 80s and 90s,I was set with the perfect guitar! Gibson is just a brand name,Epiphones are better then Gibsons ,your just paying for a name,same with Fender! Remember,one of the greatest guitars was made for less then $300,so you should never really spend more then that unless it is a custom ,then you can do what you have to!
1928 to 1967: Tortoise grain celluloid pickguards glued directly to the top, clear finish then applied over top and pickguard. Due to extreme shrinkage of celluloid and lacquer, this often causes a "pickguard crack" in the top. Pickguards became "standard" in 1931 on most models, but some martin guitars had them as early as 1928. The OM series was the first model to consistently have a pickguard in 1930.

I'll be honest .. my Washburn N4 is hands down the best I've ever known. To me, Les Pauls sound amazing but are heavy and play like a log cabin. A buddy of mine's Suhr Strat felt/sounded clinical and small. An old Gibson SG felt like a cigar box jobbie. I remember in the early 90s looking at the Vai Ibanezes and the body was great despite the zany colors but the neck was too thin and whispy. I had the frets leveled and crowned and the action on mine 10 years ago and it just plays and feels like butter .. maybe 2 - 2.5mm at the 12th fret. The neck I sanded with 2000 grit now slighty reflects light so it glides beautifully feeling like 'satin wooden glass'. My aftermarket pickups puts the tone squarely into a modern fusion rock camp of sorts .. Oh yea and I think it's the neck shape of these Davies N4s that might make them so cool. The nut is a wider, more comfortable 1 11/16 inches with a flat fingerboard radius .. so may of the others seem like 1 9/16 with a cramped, rounder fringerboard. I did try a JP6 I didn't care for the feel of .. tl;dr ymmv :)
Of course, the effect is not as good as using a professional studio but most users report that reproduction is very good for a simple computer application. The interface of Guitar Rig is extremely well laid out and even for those new to amps and guitar effects, it doesn't take long to navigate your way around. If you intend to use Guitar Rig for live performances, a convenient Live View displays the most essential readouts and level monitors to keep your eye on.
Another relatively drastic but easy and cheap way to hot-rod your guitar’s sound with its current components is to alter how and where its volume and tone pots are connected to each other. The difference can be subtle—and it’s more a matter of preference than what’s “correct”—but it can make the difference between a guitar that is just OK and one that really is a joy to play.

The simplest guitar amplifiers, such as some vintage amps and modern practice amps, have only a single volume control. Most have two volume controls: a first volume control called "preamplifier" or "gain" and a master volume control. The preamp or gain control works differently on different guitar amp designs. On an amp designed for acoustic guitar, turning up the preamp knob pre-amplifies the signal—but even at its maximum setting, the preamp control is unlikely to produce much overdrive. However, with amps designed for electric guitarists playing blues, hard rock and heavy metal music, turning up the preamp or gain knob usually produces overdrive distortion. Some electric guitar amps have three controls in the volume section: pre-amplifier, distortion and master control. Turning up the preamp and distortion knobs in varying combinations can create a range of overdrive tones, from a gentle, warm growling overdrive suitable for a traditional blues show or a rockabilly band to the extreme distortion used in hardcore punk and death metal. On some electric guitar amps, the "gain" knob is equivalent to the distortion control on a distortion pedal, and similarly may have a side-effect of changing the proportion of bass and treble sent to the next stage.

By placing two (or more) mics at different distances and angles from your speaker cab you will get two different sounds - and more variation will of course depend on whether these are the same model of mic, or different models. Mics placed further away will capture more room tone, and close mics are more upfront. Angled mics offer a less direct sound. Capture both feeds and blend or select from the two after recording.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, listPriceRange=false, MSRPHighest=915.0, isFreeShipping=true, isUpTo=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodH82691, MSRPRange=true, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=439.2, restockStartAmount=null, listPrice=549.0, priceVisibility=1, usedCount=1, MSRPLowest=832.0, salePrice=549.0, isOnSale=false, showMSRP=true, restockCount=0}
Originally delay was achieved using a loop of magnetic tape - first on improvised arrangements with a reel-to-reel recorder, and later on dedicated machines. The tape would pass through a recording head, then a playback head, then an erase head. The timing of the delay could be adjusted by moving the heads, or changing the speed of the tape. Tape adds its own colour to sound, so the echo would have that added warmth.

With two decades of experience and thousands of local customers served I found myself unemployed/downsized in 2010 asking myself what I wanted to do next. After some searching I understood that I really enjoy the interaction that takes place in the local store between the customer and the shopkeeper. I know that we can offer the same prices as the big stores and hopefully make the experience more enjoyable.

And it's not just about looking different because it does follow conventional acoustic guitar builds with its solid spruce top, scalloped X-bracing and laminated mahogany back and sides. For plugging in, it comes with the Fishman Sonicore under-saddle pickup and Isys+ preamp system, which comes standard with many acoustic-electric guitars in the market.
Just as an Auto-Wah is a version of a Wah pedal controlled by the signal's dynamic envelope, there is an envelope-controlled version of a volume pedal. This is generally used to mimic automatically the sound of picking a note while the guitar's volume knob is turned down, then smoothly turning the knob up, for a violin-like muted attack. An example is:
Excessive distortion homogenizes guitar tone. You want enough gain to get great sustain and an aggressive sound if desired, but you don’t want to lose the punch, dynamics, and immediacy of a semi-dirty tone. Malcolm Young is my benchmark—a perfect sonic barometer to go by when talking about incredible rock-guitar tone. His playing proves you don’t need a ton of distortion to rock with total authority.
You are bidding on a previously owned and in good playing condition Breedlove Atlas Series AD25/SM acoustic electric guitar. This auction is for the guitar and case you see pictured. No battery is included. Nothing else is included. It comes as pictured. Please take a moment to look at the pictures and get a better idea of what you are bidding on. There is a nick on the face of the guitar (see picture 3 for a better look). This guitar has scuffs and scratches from use. It could use a good cleaning. The electronics have been tested and are in good working condition. The neck is straight and the frets have plenty of life in them. The guitar is in good playing condition. Please take a moment to check out my other great items! Thanks ccloan.
Referring to this setup, Leckie also explains more about what makes double-miking so powerful: "If you brighten up the U67, it's totally different to brightening up the SM58, so sometimes I'll add a little brightness to the 67 and a little compression. But between that combination, I find I can get pretty much everything I need. They're rarely used at equal level; sometimes I'll favour the SM58 with the U67 at 10-15dB down. Even 20-30dB down, just bringing it in, it's amazing the different colour you get — how much the tone of the guitar changes."
Tonewood (basswood, mahogany, alder...) doesn't matter in an electric guitar unless you're getting ancient pickups for it. Older pickups used to act more like microphones and picked up sound resonating from the guitar body as well as from the strings. Modern technology has fixed that so the sound comes purely from the strings. Most guitar companies that market their guitars for tonewood are guitar brands that have been around since the times of these ancient pickups and based their marketing off of it. Most of them still haven't changed it. I recently read a scientific breakdown (experiment, analysis and all) that thoroughly proved the tonewood debate pointless once and for all. Every variable was accounted for-only tonewood was changed. So, don't worry about the basswood; it could be made from the least acoustic material on earth, and the pickups would give you the same sound as they would have on a different guitar material. I've spent months researching this in depth. (I play, too.)
I'm going to assume that if you're reading this, you've probably been to two dozen guitar sites, all with varying, if not conflicting information on the correct way to do a setup. I've been there too, I've watched guys on youtube filing down frets with a dremel tool. Now it didn't look right to me, but maybe it works for him. The reality is there is more than one way to do something, and that's OK. If the end result is a great sounding instrument, it doesn't matter how you got there. So I'm going to show you my way of how to get to a great sounding electric guitar. And if you should choose to do something differently, and it works, great!!. Part of having some fun in life is experimenting, I encourage it.
The C-series archtops were long scale until mid-1934, same as the 000 models. Sometimes a C model is converted from an archtop to a 000 style flat top. A conversion of a short scale C-2 (mid-1934 and later) won't exactly be a 000 either. The neck must be shortened to get the shallower angle required for a flat top. This amounts to about 1/3 of a fret, so the guitar ends up having a 13 2/3 fret neck. This puts the bridge position a little lower on the top, closer to the OM bridge position (but not exactly the same). The other feature on the C models that is different from a 000 is the back arch and the back braces. The archtops have more arch in the back and taller #3 and #4 back braces. Note the 1939 and later C-2 models have no abalone, the neck inlays are pearloid.
Just so you know, if you’re not a big fan of black electric guitars, Davisson has rolled out several colors like blue, vintage sunburst, red and pink for you to choose from. My choice was classic black, though! Now, my first impression of the 39” guitar as I unpacked it, was of sheer wonder. I mean, it was really tough to visualize the sturdy construction in terms of the menial cost. Of course there are letdowns, such as the body that is made of basswood instead of maple (that is used in premium guitars), which gives you sort of a mediocre feel. Even the material used for crafting the chrome bridge, humbucker pickup, pickguard and strings, is pretty average. But if you look at the overall feel, design and ergonomics, this model definitely deserves a round of applause!
The D-55 is Guild's dreadnought, very similar in shape to the all-conquering 14-fret Martin on which it's based. However, if your used to a handful in the neck, the D-55 dreadnought makes for quite the contrast: a gloss neck, and slimmer nut accentuating the neck's overall thinness; more a D than a C profile, to invite comfortable first-position chords, aided by an impressively low action. That Adirondack bracing is doing its job, too, because string separation, definition and dynamic range are all notable and it feels loud, alive and resonant when playing soft or hard. If this guitar is anything to go by, the latest Traditional models are absolutely up there with the other big American names, offering superb quality craftsmanship and world-class tone. The D-55 is a potentially serious workhorse that has every likelihood of outlasting and outperforming any one of us as long as we can keep on picking - a sumptuous strummer.
The H9 is a pedal that can actually run all of Eventide's stompbox effects (apart from the TimeFactor's Looper). All of the effect algorithms (including their associated presets) are available for purchase, but several come already built in - you get Chorus and Tremolo/Pan from the ModFactor, H910/H949 and Crystals from the PitchFactor, Tape Echo and Vintage Delay from the TimeFactor, and Shimmer and Hall from Space. In addition, there's a new UltraTap Delay that's exclusive to the H9, plus a voucher for a free algorithm of your choice. The complex effects algorithms feature loads of editable parameters. The H9 has both wireless (Bluetooth) and wired (USB) connections for the free H9 Control editor and librarian software (iOS app, Mac, Windows) for editing, creating and managing presets, changing system settings and purchasing algorithms. This pedal has been designed to take full advantage of this and it works brilliantly, especially so on an iPad where a few finger swipes zap the pedal through thin air to produce instant results. Other one-effect-at-a-time 'chameleon' pedals exist out there, but the H9 pushes the genre's envelope.
In this era, as well, Gibson began experimenting with new models such as the Les Paul Recording. This model is generally unpopular with guitarists due to its complex electronics. The Recording featured low-impedance pickups, many switches and buttons, and a highly specialized cable for impedance-matching to the amplifier. Less noticeable changes included, but were not limited to, maple fingerboards (1976), pickup cavity shielding, and the crossover of the ABR1 Tune-o-matic bridge into the modern day Nashville Tune-o-matic bridge. During the 1970s, the Les Paul body shape was incorporated into other Gibson models, including the S-1, the Sonex, the L6-S, and other models that did not follow the classic Les Paul layout.
2) Use a line-out box (I use the Suhr Iso Line Out box) between your amp and dry speaker cab to take a tap off the dry signal. Run the line-out signal into a small mixer, and run the outputs of the mixer into a stereo power amp and two guitar cabinets. As with the previous rig, use the mixer sends and returns to patch in effects—which you will set at 100 percent wet (no dry signal) and blend to taste. In this setup, you can blend the dry signal into your “wet” cabinets. For live applications, mic all three cabinets, and pan the wet cabinets hard left and right in the PA. This is the setup I use, and I was inspired to go this route by guitarists such as Steve Stevens and Eddie Van Halen. I like to blend a significant amount of dry signal into the wet cabs. In the PA, the sound is absolutely massive! I also use an expression pedal to control the amount of effects in my wet cabs, so I can tailor my delays and reverbs on the fly.

Radial Engineering Ltd. is a manufacturer of professional audio products based in Vancouver, British Columbia, Canada. The company offers a wide array of products that are sold under brand names such as Radial, Tonebone, Primacoustic, Reamp and Zebracase. These are offered through a network of dealers and distributors that span the globe. Quality construction, exceptional audio performance and superb customer service are the underpins that have served to make Radial one of the most respected and trusted brands in the industry.

While a noise suppressor/gate is not a modulation effect, it usually works and sounds best when it’s placed either directly after or in front of modulation effects. I prefer the noise suppressor after modulation effects as this placement will mute an unwanted constant “whoosh” that often can be heard when a flanger or phaser shifter is engaged even though the guitar is silent.
Overall, the reviews and comparison should not be the criteria on which you should decide the brand that you want. The best way to choose one is by listening to and feeling the sound that the guitar produces. The brands listed above are some of the best-known in the world. Of course, there are many other good brands out there too. If you feel we've missed out on some, please feel free to mention them in the comments section below.
A touring pro friend of my was given one of these years ago by the McPherson company as a promotional endorsement for him to play on stage. After playing his I have wanted one for years. They are indeed expensive, but recently I was able to purchase one. In my 45 years of playing I have always gone through multiple examples of each guitar I've owned before purchasing, and have (and do) own Martins, Taylors, Gibsons, Tacomas, Fenders, Seagulls, Alvarez, Yamaha, etc. which were all really good in their own right. However, nothing I've played has been as good as the McPherson in terms of tone, volume, sustain, note clarity, playability, workmanship; it's useful whether played solo or in an ensemble setting, and for chords or single line playing. It is indeed the last acoustic guitar that I will ever buy.
By 1961, at least, the makeover was complete. The old mini Les Paul, the J-1, was changed to become a sunburst double-cutaway solidbody. These had widely flaring equal cutaways, a single rectangular neck pickup, a large pickguard which covered most of the treble side, a wooden adjustable bridge, covered tailpiece, volume and tone. The bolt-on neck now had a more Gibson-style open-book head shape (with round logo sticker). The fingerboard had the old large dots with two small octave markers. The J-1, in a number of forms, would survive at least through 1966, if not longer. It is presumed that the J-2 was still around and that it had also become a double-cutaway; it most certainly was still in the catalog, as a double-cut, in ’62.

It's the neat switching that makes this very classic-looking Tele act a little differently. All the standard Tele pickup selections - bridge, bridge and middle (in parallel) and neck - are in place, but it's a four-way switch, as opposed to the standard three-way; the additional selection provides us with both pickups in series for a bigger, louder and more humbucker-like 'secret' sound. The volume control has the S1 push switch in the top of the control knob: pushed down, the parallel and series-combined pickup selections are out-of- phase, giving three additional sounds over the standard Tele. The Baja sticks relatively close, of course, to the classic 60s Tele recipe. The rosewood 'board and alder body just seem to give that lovely smoothness to the high end that will make it less ear-wearing, especially if you're swapping over from an older-style humbucking Gibson. The standard mix is typically classic, wider than a Strat's but still nicely textured; the neck pickup here sounds a little fuller than some older readers or vintage Fender electric guitar owners will remember.
Dismantled Fender Telecaster neck pick-up, showing the exposed enammeled, very fine, copper wire, wound on a bobbin around 6 magnets sitting below each string. From Mojo Pickups - 50's Telecaster Rewind. In case you are wondering the metallic case (used to be high-chrome content alloy) acts as a hardware low-pass filter, dispersing the magnetic field of the high frequency vibrations of the string across all 6 poles, but allowing long wavelength, low group velocity, bass frequencies to be captured relatively unhindered— the reason for this is quite complicated and the subject of a solid state physics class which we will not go into here.
In order to keep your guitar clean, there are some tips that you should be aware of. When taking the strings off to clean the system, do so two or three at a time. If you are not changing strings, wipe them with a dry cloth after every session. Wiping down the fretboard with a damp cloth occasionally is enough to keep it in good shape. The pickups, tuners, bridges, and nuts can be cleaned in much the same way. The pickups on your guitar should be cleaned with a dry cloth. Be sure to only use gentle cleaning products on your guitar.
The descriptions that follow are very broad, but if you look around the guitar world you can usually pin any solid-body guitar down to one of these general categories. Of course you’ll see wild shapes like the Gibson Flying V, Ibanez Destroyer, Dean ML and Jackson Rhoads. They may look like they’re from another planet, but if you check their specs you’ll see they follow the same basic design principles as any other solid-body electric guitar.
In the 1950s, several guitarists experimented with producing distortion by deliberately overdriving amplifiers. These included Goree Carter,[3] Joe Hill Louis,[4][5] Elmore James,[6] Ike Turner,[7] Willie Johnson,[8] Pat Hare,[9] Guitar Slim,[10] Chuck Berry,[11] Johnny Burnette,[8] and Link Wray.[12] In the early 1960s, surf rock guitarist Dick Dale worked closely with Fender to produce custom made amplifiers,[13] including the first 100-watt guitar amplifier.[14] He pushed the limits of electric amplification technology, helping to develop new equipment that was capable of producing "thick, clearly defined tones" at "previously undreamed-of volumes."[13]
...Wow! I JUST bought this electric guitar from a pawn shop for 37 dollars. I could instantly tell it was a 60's guitar, so I had to have a closer look. Mine has the tailpiece clam, but it was missing the whammy bar, so my dad built me one. It didn't even work, at all. A good cleaning fixed that though, it now works perfectly. Now it's fun little piece of history.

Further simplifications occur for the regular tunings that are repetitive, that is, which repeat their strings. For example, the E-G♯-c-e-g♯-c' M3 tuning repeats its octave after every two strings. Such repetition further simplifies the learning of chords and improvisation;[71] This repetition results in two copies of the three open-strings' notes, each in a different octave. Similarly, the B-F-B-F-B-F augmented-fourths tuning repeats itself after one string.[73]
Another strong point of this guitar is its African mahogany neck that has a close to standard scale length of 25.3", making this instrument very easy to transition to when coming from regular sized guitars. Also noteworthy is its innovative split bone saddle, which allows for better intonation. Finally, the CT4B preamp gives you 3-band EQ, a volume control and a nifty built-in tuner Artists that play Takamine guitars include John Scofield, Bruce Springsteen and Bruno Mars! This is a great buy if you are looking for a premium couch & travel friendly acoustic guitar that does not cost an arm and a leg.

This preamp can also offer a gain control. Essentially, it’s what drives the power levels of the signals to the amp, but it can also boost volume. If the preamp doesn’t have a gain control, it can be assumed that it’s already factory-set to a certain level of gain. One way around the lack of a gain control is to use the volume control on the main amp. Either way, it’s very helpful when you find you need to compete in a multi-instrument band when you feel like you’re being drowned out or you’re experiencing unwanted feedback when you do try to vie for being heard.

Midco International, a former musical distributor, sold the Lotus brand as an exclusive trademark of guitars during the 1970s and 1980s. Like many other distributors, Midco commissioned a manufacturer in Asia to build guitars under a unique brand name. However, many of these factories in Asia received requests to build guitars for multiple manufacturers/distributors, meaning the same guitar could essentially end up under multiple trademarks. This isn’t much different from what Harmony, Kay, and other house-brand jobbers from the Chicago area were doing in the 1940s through the 1960s.

Bottom Line: The Line 6 HD500X is incredibly in-depth in the amount of options and editability it gives you. Doing all of it from the small screen on the actual unit is headache-inducing, but if you have a computer you can hook it up via USB and edit your sounds from there much more easily. There’s more of a learning curve with the HD500X than there is with the Zoom G3X, but the presets are decent enough and allow you to audition it if you’re the impatient type. Where the HD500X lacks is that it’s less of an immediate-gratification pedal, and it’s hard to tweak on-the-fly and come up with potentially inspirational sounds. Because of how the interface is, this is definitely more of a “sit down with headphones and tinker with it to get your perfect sound” type unit. If the effects quality of the Zoom G3X is a 7/10, the Line 6 HD500X is an 8.5/10. This is the one to get if you’re the type that likes to dig in and have control over every little thing. The price tag is a little on the high side, but considering what a powerhouse this unit is, it’s definitely not unreasonable.
Now, you have your first electric guitar and it’s set up nicely. The next thing you ask is “what is the best way to learn guitar?” And the answer is simple – get some lessons! Whether it’s from your local pro, guitar teacher, or from a range of excellent online courses, lessons will teach you the basics – allowing you to start playing songs within a couple of hours.
This thing is awesome! For its price you can't find any other processor that can plug into your computer and easily navigate the pedals. To connect to your computer or laptop you will need a standard printer cable (I would pick up one of the amazon basic cables for cheap.) I bought a 10 foot one which is plenty to run from the pedal to my music stand. Also once you are connected to your laptop via the USBcable, all sounds from your laptop will run through your amp/headphones. That confused me the first time when my computer speakers sounded better, haha. If you are curious, It comes with a power supply.
{ "thumbImageID": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Traditional PRO-II Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ocean Blue Burst", "sku": "sku:site51500000014857", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst-1500000014857.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Red", "sku": "sku:site51500000014856", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red-1500000014856.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red/J40313000004000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000014853", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst-1500000014853.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst/J40313000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Desert Burst", "sku": "sku:site51500000014855", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst-1500000014855.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst/J40313000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000014854", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony-1500000014854.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony/J40313000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }