Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches (18.4 cm). Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars' compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.
Martin opened its “Custom Shop” division in 1979.[7] Martin built its 500,000th guitar in 1990, and in 2004 they built their millionth guitar. This guitar is entirely hand-crafted and features more than 40 inlaid rubies and diamonds. It is worth an estimated $1,000,000.[8] As of 2007, Martin employs 600 people. Thirteen workers are devoted to quality assurance[citation needed]. In October, 2009, Martin purchased at auction a D-28 that was played by Elvis Presley in his last concert for $106,200.[9]
Designed by Mesa founder Randall Smith, the amp uses silicone diodes that give it a gain level and feeling all its own. The amp proved especially popular with metal and hard-rocking groups such as Living Colour, Metallica, Tool, Korn, Soundgarden and Foo Fighters. In 2009, Mesa revamped the Dual with a third, dedicated clean channel, making the venerable workhorse more versatile than ever.
One problem with adding a tweeter to a bass speaker cabinet is that the tweeter may be damaged by the overdriven amplifier tone that is popular in some musical genres, since overdriving the amplifier adds a great deal of high frequency information to the signal. Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets produced by manufacturers such as Gallien-Krueger and Carvin and other manufacturers allow bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn, which prevents this problem. Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
{"id": "519377", "skuOrProductId": "519377", "categoryId":"site1AAG", "name":"Firebird Studio Electric Guitar", "pageUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"All the classic Firebird Studio elements--mahogany body, set mahogany neck, Alnico Classic 'buckers, chrome hardware, and stopbar tailpiece with a limited edition finish.", "value":"167.58", "priceMin":"167.58", "priceMax":"399.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"70", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}

So, I've done what any self-respecting woman with a rather obsessive personality could do and trawled YouTube for all the best videos of Swift performing stripped down versions of her songs where it's just her singing against a minimal melody. I'm sure you'll agree that as much fun as queen of the squad, awkward dancing hero era Swift is, that these videos are all the proof you need that she doesn't need dance moves or supermodel friends on stage in order to rule.

The best ones are the ones that sound good to YOU and inspire YOU to play better, no matter how old they are, what’s in them or how many features they do or don't have. It follows that there are thousands of possible “best” amps from any number of brands, from old to brand new, that can fit this description. You just have to find the right one that fits your particular needs. Brand names don't matter so much as features here, so that’s why I'm not going to mention them specifically.

You should try the compressor after the overdrive stage. Providing an already compressed signal to a drive/distortion pedal doesn’t allow the full dynamic range of the pedal to be applied to the raw guitar signal, losing something of the capability or unique nature of these pedals. You can also lose the touch sensitivity of the drive pedal when the input signal has its louds softened and it’s quites upped. Placing the compressor after drive pedals allows the full driven tone to then be leveled dynamically with the compressor. Note that may drive and distortion pedals will include their own natural compression so addition of compressor after the drive pedals allows for fine tuning of the overall compression. It’s worth experimenting with.

Fernandes Guitars is a guitar and accessory manufacturer, that originated in Japan in 1969, building flamenco guitars. As the company grew it expanded production to include more acoustic guitars, electric guitars, bass guitars, amplifiers, and accessories to become one of the biggest guitar manufacturers in Japan. Fernandes also owns Burny, a brand for Gibson replicas.

I've been an on/off guitar player for at least 15 years now. Never really good, but steadily improving. My hardest thing is consistent motivation. I go through spurts where I study theory and practice like crazy and then, suddenly I just stop. I got this both because I was exceited about it's teaching potential (lessions were $20/30 min when I was a kid, got this for $25) and it has got me playing again and is a lot of fun.
A few years ago I wanted a mini/parlor guitar. I tried a few, did not like what I heard in the Taylor line and I did not want another Larrivee. The irony of it is, I did buy a Taylor and now realize it was because it sounded like a Larrivee, bright and even. This is an anomaly Taylor, I know that now. I bought a Larrivee Parlor which is okay but I also have learned that I am not a parlor, mini fan. They, for the most part, do not deliver an even enough sound for me. I have played Lowden, Martin, Gibson, Guild, Olsen, Huss and Dalton. I recently played an Irvin guitar. Wow, what a beautiful line of guitars. I want one. It is my next guitar with its sustain, consistency, brilliance and ease of ...more
A better way to get distortion, of course, is to use guitar effect pedals. Got your hands on some pedals and starting to play around with the sounds you can make? Well, you can still use these tips to further enhance your distorted tone, since the same theory applies. Most distortion pedals have a volume, gain, and distortion knob in addition to whatever additional controls they give you. If you're simply not satisfied with your pedal's guitar distortion, you can turn the gain up and adjust the other settings, just like you'd do on your amp.

I am old enough to remember Kay guitars back in the 70's. And what I remember of playing them is they were poorly put together, poor action (like mile high action), poor sounding pickups etc...They also seemed to always be the guitars that were the cheapest in all the mom n' pop stores, and the ones that were just sold to students, if they were sold at all. In other words,
While it can be a troubling task to find the perfect electric guitar to bring out your inner rock star, we hope that our electric guitar reviews & our comprehensive guide has helped you narrow down your choices. Our best piece of advice is to determine the type of genre you’re interested in playing. That will be a good basepoint for you to work from in order to determine the best electric guitar that fits your needs. Afterward, it is important to select the guitar that has the best components to give you the highest quality of sound. The color does not matter too much but the next most important factor to think about is certainly the wood type used to build the electric guitar. Picking the right type of wood is going to more or less, create better or worse sound.
Years ago companies used to manufacture rotating speaker cabinets (the most famous being the Leslie Rotary Speaker) – as they rotated the sound would change and develop, creating interesting modulation effects. Nowadays such things are considered too large and inconvenient to transport and use, so we have stomp boxes to help us emulate the sound. The most famous of these is the Dunlop Uni-Vibe, and although it doesn’t sound as close as other pedals to the real thing, it has become a famous sound in its own right. Rotary speaker effects often have controls for the speed of the effect, and can sometimes (such as in the case of the Uni-Vibe) be connected to expression pedals to control the speed on the fly. If you’re into 60’s psychedelic rock like Jimi Hendrix, this one’s a must.
The benefit of a compressor lies in that every note played will be at nearly the same amplitude, and therefore nearly equal in volume. This will help normalize tones that are sometimes lost in the mix because of complex overtones, and it will result in a more articulate sound. Notice that if you don’t pick all notes of an arpeggio at exactly the same pressure you will likely get a different sound for each note, especially if you are playing a tube amp. Tube amplifiers react dynamically to stronger and weaker signals it’s the allure of them and thus the non-uniformity of picking at different strengths will be exaggerated. A compressor will fix this problem and normalize all notes of the arpeggio regardless of the player’s technique and equipment, which is consequently why many soloists prefer them.
Needing a more compact logo suitable for the guitars’ headstock, the founders decided to change the name to “Taylor” as it sounded more American than “Listug” and because as Kurt Listug put it, “Bob was the real guitar-maker.”[3]Listug became the businessman of the partnership while Taylor was responsible on design and production. In 1976, the company decided to begin selling their guitars through retailers. In 1981, facing financial difficulties, Taylor Guitars took out a bank loan to purchase equipment.[4][5]
Most people think of Roy Orbison as the super-smooth crooner who sang songs like “Crying,” “In Dreams” and “Only the Lonely.” But Orbison was also a wicked guitar player, who ripped out several impressive solos on early Sun Records singles like “Ooby Dooby.” In fact, Sun owner Sam Phillips was more impressed with Orbison’s guitar playing than his singing during the early days of the rocker’s career.

Originally this effect used 1/4″ tape going round a machine like the Echoplex. It then recorded whatever you were playing and played it back to you a set time later.Since its launch in the 1950’s tape based delay started to appear in more and more recordings. Its saturated sound and imperfect repeats gave it some stunning character that is still loved today.Now tape is dwindling so most people have moved on to emulated digital pedals. These get close to the sound of an original tape unit without any of the added maintenance.

The book discusses both tabs and notation which makes it easier to transition if you’ve been using the former. It covers a wide range of topics including scales and arpeggios. The approach the author takes is logically and accessible with plenty of examples and exercises to make it stick. The only downside is that there are no songs included in it.
What if you don’t have a music shop nearby and need to order a guitar online? Our recommendation is that when you have read through our list of the best guitars, select a few that you’re interested in, and look them up on YouTube. There you can watch (and listen to!) great reviews where you can hear the guitar be played and get someone else’s opinion on it. Try listening to the different guitars directly after each other so you can determine which one sounds the best.

The Gibson 2017 has a truly amazing setup and it played nicer and felt better than most models in its class. The tone is deep and throaty, and ab0ve all, it’s 100% Les Paul. What actually made the big difference in this electric guitar is the upgraded electronics and wirings with very minimal feedback and sustain. There is no buzzing or excessive string vibration. All that you get is a superb, perfect fit and finish.
Usually considered the big brother to the phaser, the flanger is indeed related in a sense, but achieves its heavier, some would say more oppressive sonic results by imposing more control over its placement of the notches created by the phase relationship, rather than spacing them evenly as the phaser’s sweep does. Much of the basic circuitry behind flanging, very simply put, follows the template as given above, but requires far more complex engineering to take it where it’s going. Pedal-sized units designed to replicate the sound of two big reel-to-reel tape machines sliding in and out of sync weren’t made possible until larger, more complex ICs became available to help do the job. This extra technology is needed to harmonically tune the out-of-phase notches, and therefore, relative to these, the peaks, and it’s this harmonic spacing of the spread that can make a genuine flanger pedal sound almost like it’s actively participating in the note selection of a sequence you are playing. Whereas phasers have from four to ten stages, the individual chips within proper flangers may carry hundreds of stages in themselves. Dizzying stuff.
We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28

The effects alter the instrument sound by clipping the signal (pushing it past its maximum, which shears off the edges of the signal waves), adding sustain and harmonic and inharmonic overtones and leading to a compressed sound that is often described as "warm" and "dirty", depending on the type and intensity of distortion used. The terms distortion and overdrive are often used interchangeably; where a distinction is made, "distortion" is used to denote a more extreme version of the effect than "overdrive". "Fuzz" is a term used to describe a particular form of extreme distortion originally created by guitarists using faulty equipment (such as a misaligned valve tube, see below), which has been emulated since the 1960s by a number of "fuzzbox" effects pedals.

Many manufacturers abbreviate the number and size of speakers in the name of their equipment. For example, a Fender bass combo amp with two 10" speakers may be called the "Fender 210". Similarly, a Fender cabinet with two 12" speakers may be called the "Fender 212". Another abbreviation that is used is to add the wattage to the name. Thus a 500 watt Yamaha combo amp with two 12" speakers may be called the "Yamaha 212-500".
Speaker simulators are switchable filter sets designed to reproduce the EQ curves of a variety of speaker cabinet configurations (with varying degrees of success). The subsequent coloration is meant to replicate typical speaker sound and behavior, softening the harsh upper-midrange edges associated with amplifier distortion. Speaker simulator boxes are designed with direct  guitar-amp recording in mind, and are intended to remove the speaker cabinet and microphone link from the signal chain.
Augustino Lo Prinzi Guitars - Augustine Lo Prinzi has made more than 10,000 guitars and just started his 49th year as a guitar maker! Renowned throughout the instrument making field, Augustino LoPrinzi's first instruments were classic guitars. As his career progressed he constructed many types of string instruments, numbering in the thousands : mandolins, lutes, violins, and steel string guitars, to list but a few. Now he is applying these years of wisdom to his first love, the classic guitar, which began his journey into instrument making.
Solid body guitars were the next step in guitar development, with Leo Fender creating a modest instrument called the Broadcaster, which was then rebranded as the Telecaster. The Stratocaster came later and, in addition to the changes in the pickups, included contours in the body that made the guitar more streamlined and easier to play while standing up. Today, the Stratocaster is still the most iconic electric guitar shape; it’s associated with guitar wizard Jimi Hendrix, and many beginners end up with a Stratocaster-style guitar. Gibson introduced their own line of solid body guitars, the considerably swankier Les Paul.
With the SparkFun Proto Pedal you’ll find all the problems of a guitar pedal’s complex framework solved with true bypass and LED switching; a large, open prototyping area equivalent to a standard solderless breadboard; a small prototyping area for power regulation or reference voltages; and six positions to help organize potentiometer wiring. To make your life even easier, not only have we written a complete assembly guide for the Proto Pedal; we have also written two effect circuit guides that utilize the board’s large prototyping area. All of these guides can be found in the Documents section below.
Alas, the DT-250 was more of a punctuation point than a sign of the times. Or maybe it was a sign of the times. The Phil Collen model (minus his name after ’85) and the flametop DT-350 made it through 1987, but this DT-250 lasted only from ’84 to ’85. Unfortunately for this heavy metal monster, pointy guitars were already on the way out when it appeared, about to be eclipsed by the Superstrat craze that would dominate the rest of the ’80s. While these redboards do not really qualify for rarebird status, they’re not all that common. Over the course of their production, only 1,432 were built for worldwide distribution.
This site aims to be a reference point for guitar players and guitar collectors. There's information, history, photographs and sound clips of many famous, and not so famous guitars and basses by makes such as Danelectro, Epiphone, Fender, Gibson, Guild, Gretsch, Hagstrom, Harmony, Hofner, Rickenbacker and Vox. There is a section on effects pedals too!
{ "thumbImageID": "Les-Paul-Standard-HP-2018-Electric-Guitar-Blood-Orange-Fade/K35709000001000", "defaultDisplayName": "Gibson Les Paul Standard HP 2018 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blood Orange Fade", "sku": "sku:site51500000137377", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Blood-Orange-Fade-1500000137377.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Blood-Orange-Fade/K35709000001000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cobalt Fade", "sku": "sku:site51500000137376", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Cobalt-Fade-1500000137376.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Cobalt-Fade/K35709000002000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Hot Pink Fade", "sku": "sku:site51500000137375", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Hot-Pink-Fade-1500000137375.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Hot-Pink-Fade/K35709000004000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Heritage Cherry Fade", "sku": "sku:site51500000137379", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Heritage-Cherry-Fade-1500000137379.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Heritage-Cherry-Fade/K35709000003000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mojave Fade", "sku": "sku:site51500000137378", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Mojave-Fade-1500000137378.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Mojave-Fade/K35709000005000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }