It's not subjective. When you're setting up a guitar you measure the height of the strings, typically you're at about 4/64" for the high E and 5/64" for the low E. You can go above or below the recommendation but if you go too low you can start to get a bit of fret buzz. How low you can go is not a function so much of what guitar you own, but how level your frets are and your neck relief. Most good guitars can be set up to play "fast". Obviously they don't get faster when you paint them fluorescent orange, or make the headstock pointy.
Our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod. You may bring your brand new guitar in your Local Guitar Shop for proper setup and adjustment of the truss rod.
Like Kleenex for tissues or Dumpster for large garbage containers, the brand Teisco has become a kind of shorthand for “strange looking Japanese guitar from the 1960s.” When someone posts a picture on a forum of a vintage Japanese guitar that he’s trying to identify, five people will immediately shout out “Teisco!” Occasionally, they’re even right.
Squier model Telecasters are sold by Squier, a Fender-owned import brand. These can bear the Telecaster name, since Squier is owned by Fender. Squier guitars, especially the Telecasters, have gained popularity[citation needed] and a good reputation amongst guitar players,since it has expanded its production of guitar models.For example a 1989 Korean Squier Telecaster made in the Samick factory could be considered tonally superior[citation needed] to a modern American produced guitar besides necks being more comfortable in general.Template:Citation neede Squier has a wide range of different Telecaster type guitars available, from the entry-level Affinity Series to the better quality Standard and Classic Vibe Series. However, Standards are often used by beginners. Also available are the Artist Series and Vintage Modified Series. Among other famous musicians, Sheryl Crow has occasionally used a Squier Telecaster for recordings and live performances.[4][dead link]
Power-valve distortion can also be produced in a dedicated rackmount valve power amp. A modular rackmount setup often involves a rackmount preamp, a rackmount valve power amp, and a rackmount dummy load to attenuate the output to desired volume levels. Some effects pedals internally produce power-valve distortion, including an optional dummy load for use as a power-valve distortion pedal. Such effects units can use a preamp valve such as the 12AX7 in a power-valve circuit configuration (as in the Stephenson's Stage Hog), or use a conventional power valve, such as the EL84 (as in the H&K Crunch Master compact tabletop unit). However, because these are usually placed before the pre-amplifier in the signal chain, they contribute to the overall tone in a different way. Power amplifier distortion may damage speakers.
Two brands are synonymous with this type of instrument: Gibson and Fender.  Not only were they the earliest to bring the electric guitar to the masses, but the designs they created are still employed today, preferred by budding beginners and working professional musicians alike.  Other companies have made their mark in the market by creating variants on Gibson’s and Fender’s original designs, but they are still identified through the names that the originals were given.
Guitars by José Romanillos, Robert Bouchet, Daniel Friederich, Hermann Hauser I, Hermann Hauser II, David José Rubio, Dominique Field, Francisco Simplicio, Enrique Garcia, Pascual Viudes, Enrique Coll, Santos Hernandez, Domingo Esteso, Ignacio Fleta, Marcelo Barbero, Arcangel Fernandez, Hernandez y Aguado, Manuel Reyes, Enrico Bottelli and 1950's Ramirez.

Guitars with better-quality electronics can avoid these traits to an extent, but as you can see when you turn the tone pot all the way to zero, the dynamics of the RLC circuit that the pickup and tone circuit create result in a “hump” in the upper bass/low-midrange frequencies, roughly centered (in this example) around 300 Hz. This happens because the low resistance, coupled with the high “capacitive reactance” of the capacitor and the “inductive reactance” of the pickup’s inductor, creates what’s known as a “band-pass filter”, where a specific frequency range in between very low and very high frequencies has the lowest total impedance and thus becomes the most present in the tone.
In Chicago in the sixties, "the rules had been laid down" for young, white blues bands, Mike Bloomfield told Rolling Stone in 1968. "You had to be as good as Otis Rush." That wasn't easy. A Mississippi native who moved to the Windy City in the late Forties, Rush was a fearsome electric guitarist – with a grittytreble tone and lacerating attack, like a gunslinging cross of Muddy Waters and B.B. King – as well as a knockout songwriter. Along with guitarists like Magic Sam and Buddy Guy, Rush helped create the more modernized, R&B-influenced approach to Chicago blues that came to be known as the West Side Sound. Rush's impact on later generations was enormous: His late-Fifties and early-Sixties singles were go-to covers for Led Zeppelin ("I Can't Quit You Baby"), John Mayall ("All Your Love [I Miss Loving]") and the J. Geils Band ("Homework"), while Stevie Ray Vaughan named his band after Rush's lethal '58 lament "Double Trouble."
Unfortunately there are a few who are not too happy with with some of the default patches, they caution that the PODHD500X is not a plug-and-play unit. While you can get good tones with a bit of tweaking, you can get even better tones with more experience, so the learning curve can be a bit steep for some. For best results, you ought to research the actual gear that your favorite musicians use, along with their settings and use them as your starting points to creating your own tones. Thankfully, there are user made presets that you can also use as base for your own virtual signal chain.
The No. 140 Supro Capitan was a handsome f-holed archtop, which was Regal-made. It sported an arched spruce top with a maple body. The hardwood neck had an ebonized fingerboard with pearl position dot and jumbo frets. An oval Supro logo plate sat on the faceplate. A single rectangular metal-covered pickup (with holes exposing the poles) sat just to the bridge side of the middle position. This pickup had six separate coils! It had a “crystaline pick guard,” probably tortoise, and adjustable compensated bridge, National-stamped trapeze tailpiece, and one volume and one tone control situated just behind the �guard. It came with a grey Servitex tweed case, and in ’42 cost $71.50.

Yes and he lost the finger tips on his left hand and attached makeshift fingers out of thimbles but managed to play some of the greatest evil licks ever. I love Eddie but he screwed up Van Halen terribly by getting rid of Dave and turning it into a girl band. Duane was awesome and highly skilled and a sought after studio musician. Clapton is the master.

© 2013 Ubisoft Entertainment. All Rights Reserved. Rocksmith logo,, Ubisoft, and the Ubisoft logo are trademarks of Ubisoft Entertainment in the US and/or other countries. The “PS” Family logo and “PS3” are registered trademarks and the PlayStation Network logo is a trademark of Sony Computer Entertainment Inc. Software platform logo (TM and ©) EMA 2006.
The movie is very hauntingly beautiful, and it's especially highlighted by an awesomely haunting score, and some breathtaking visuals. The story is interesting, but it's definitely slow-paced, and the climax is much more of an intellectual payoff than a spectacular action scene (which many viewers might be hoping for). So I can definitely see why some people would hate this film, but I loved it. It's one I definitely won't forget anytime soon too, and it's great to see Natalie Portman (my old favorite actress) back in top form! watch movies online pro
Gotta say a tele has to be the hardest but most rewarding to play. If you make a mistake, you will definitely hear it, but it just helps you're playing get more clean. Les pauls are a lot easier with the shorter scale length and forgiving pickups. Haven't played any metal guitars but I figure it has a lot to do with their setup that makes it sound so easy. You can do just about anything with the tremolo arm into a van halen kind of setup and it'll sound cool. Or you can whack one off with your guitar like steve vai

It is a common misconception that a new guitar player should start with nylon strings, because they are easier on fingers or easier to play. But nylon strings and steel strings are not interchangeable on the same guitar, so it’s not a matter of progressing from one kind of string to another with experience. What should really drive your decision is what kind of music you want to play.
The focus of my career has been audio journalism, but I’ve been active as a musician since taking up guitar seriously in the 1970s. I’ve played various stringed instruments with jazz, rock, and folk groups in New York and Los Angeles, and I currently play double bass in three jazz groups in Los Angeles. (I sub regularly in a couple more groups.) Having conducted innumerable multi-listener comparisons of audio products over some 25 years, I have a good idea of how to conduct fair product tests. I own two guitar amps, which I loan to visiting guitarists and use with my electric ukuleles, and I’ve even built a couple of guitar amps, so I understand how they work.
Is it fine if I buy an electric guitar that’s worth <900$ as my first e.guitar? I don't know why it's recommended not to buy a guitar that's more advanced than my level. I mean this guitar will last me for years, so why not go for the best from the beginning? Also, I need to learn how to differentiate between the various guitars if some are better for lets say metal. I listen to a lot of Children of Bodom, Korn, Metallica and more.

There are different ways to play electric guitar. One is to just play the electric guitar, and to take it as it is. Another way is to play the guitar as a sort of synthesizer. With the right effects (delay, reverb, volume swells, added octaves), no one would even know that it was a guitar. Neither way is wrong, but we refer to both as "playing electric guitar" even though they're being used in completely different ways that may as well be different instruments. Drama ensues.
Cutting the RATE and DEPTH knobs too high will cause the effect to sound thick and chaotic. This is more so an attribute of the chorus effect in general and not a knock on the pedal itself. With that in mind, we would advise taking Roland's "formal" settings suggestions (pictured below) with a grain of salt, as long as you're using the CH-1 with an acoustic guitar. In most cases, we found that the pedal performed best on the lower settings, particularly with the RATE and E.LEVEL knobs cut before 12 o'clock.

Launch price: $499 / £445 | Body: Chambered basswood body with arched-maple top | Neck: Maple | Scale: 24.6" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Black Top humbuckers | Controls: Neck volume, bridge volume, tone, master volume, 3-way pickup selector | Hardware: Anchored Adjusto-Matic bridge | Left-handed: No | Finish: Gold, Silver Sparkle, Black

Unabashedly brute class, with typical German overbuilding, the Schallers shown here are the Incredible Hulk of the bunch (Fig. 17). At a hefty 272 grams, they have the might to get noticed when you fasten them to your axe. If you have a guitar with a tiny headstock, you’ll hear and feel a difference with the Schallers. Whether or not you like the change is subjective, and it depends on the makeup of the rest of your guitar.
Paul Reed Smith Guitars (better known as PRS) is a Maryland-based manufacturer, and relatively new in the world of guitars – founded in 1980, when they began making a series of hand-built guitars. Today they have a wide range of models, which are built in both Asia and America, as well as a full roster of artists playing their guitars; including Mike Oldfield, Dave Navarro, Carlos Santana, and Mark Tremonti.
Guitar loudspeakers are designed differently from high fidelity stereo speakers or public address system speakers. While hi-fi and public address speakers are designed to reproduce the sound with as little distortion as possible, guitar speakers are usually designed so that they will shape or color the tone of the guitar, either by enhancing some frequencies or attenuating unwanted frequencies.[47]
The way that cabinet manufacturers state the power handling capabilities of a speaker cabinet (or an individual speaker) can also be confusing. An important figure for a speaker cabinet's power handling capabilities is its rated wattage-handling capabilities as "RMS". For example, a bass speaker cabinet's back panel may state that it has a power handling capacity of 500 watts RMS. This means that the speaker can handle an average power, from a power amplifier, of 500 watts. The speaker can also handle occasional peaks or "transient" bursts of higher wattages, so long as these are brief. Where is becomes confusing is that some manufacturers also list "peak power", also called "maximum power", "max power" or "burst power". Peak power is the power-handling ability of the speaker for very short bursts of high-wattage signal. The RMS figure is much more important than the "peak power" or "max power" figure. To add to the confusion, some manufacturers state the "program power" capabilities of their speaker cabinet, which can be a vague and less defined term. Reputable, major manufacturers state the RMS output and/or power-handling capabilities of their gear.
Get a custom drawn guitar or bass wiring diagram designed to your specifications for any type of pickups, switching and controls and options. Just complete the guitar wiring diagram order form with your custom specifications and our designers will do the rest. Our custom diagrams are easy to read, affordable and delivered by email for FREE! To order a custom diagram, select the number of pickups on your instrument below and complete the diagram order form.
In late 1960, the amp was redesigned with three, rather than two, channels, each with two inputs, and offered with an optional Top Boost, or Brilliance, circuit, which introduced an extra gain stage and separate bass and treble controls. The Top Boost feature proved popular enough that it became standard on the AC30/6 (so named for its six inputs). Its chimey high end was a signature of the Beatles’ early recordings and was later favored by guitarists like Brian May, Tom Petty, Peter Buck and The Edge, whose 1964 AC30/6 has been featured on every U2 album.

But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.
*When the item leaves our warehouse, they are generally shipped to EMS Worldwide Express Mail Service and it would usually take 7 – 10 days to United States. We ship our products from Mainland China where our manufacturing factory is located. We will inform you once your order has been shipped and we will be providing you with the tracking number so you can conveniently monitor the shipments progress on EMS Worldwide Express Mail Service website or SF Express and USPS and Parcel Force website.
We’ve already shown you how you will sometimes want more than one mic on your amp to achieve ideal sound in your tracks. Many semi-distant and ambient techniques will be most useful, along with a close mic, but on a separate track, to retain the option of blending a more-direct tone to create your overall sonic picture. Any single-mic positions discussed thus far can be combined into multi-mic sounds in the mix when recorded to different tracks. There are also several other approaches to multi-miking that might come in handy now and then, and which are worth some exploration.
Think "guitar god," and a particular image of Jimi Hendrix springs to mind: Hendrix kneeling, shamanlike, before his Fender Stratocaster, his hands seeming to coax flames from the instrument. Captured by photographer Jim Marshall at the 1967 Monterey Pop Festival, this image is burned into the collective consciousness of American rock culture in the same way that Hendrix's signature sound still echoes through the years. His defiant rendition of the "Star Spangled Banner" isn't quite a technical masterpiece -- one could almost play the melody with a single finger. What elevates the song is its sound. To get that dissonant wailing, Hendrix uses two effects: an Arbiter Fuzz Face and the Vox Wah-Wah [source: Trynka].
In 1981 Fender-CBS hired William Schultz, John McLaren, and Dan Smith away from the U.S. division of Yamaha. Schultz became the president of Fender-CBS, McLaren the managing director while Smith was appointed the director of marketing for Fender electric guitars. In a drive to rejuvenate the quality control and Fender’s market position, Dan Smith oversaw an upgrading of the basic production model Stratocaster and by late 1981 the new production model was unveiled as the 1982 Stratocaster. It featured a pre-CBS smaller headstock (compared to the 1980 “Strat”), a four bolt neck plate, an overwound X-1 pickup (introduced on the 1980 “Strat” model) in the bridge position and a body end truss-rod adjustment without the Bullet nut. These are known today as “Dan Smith” Stratocasters and prized by collectors for the attempted, albeit brief, return to pre-CBS stylings.
Compressors are often applied to electric guitar tracks to bring out the guitar’s natural sustain, as well as even out the overall dynamic range. Lead guitar parts usually benefit from a degree of compression treatment, while heavily overdriven rhythm parts often require very little or none at all, as the distortion naturally provides its own type of dynamic control. In the case of unnatural sounds, such as electric guitar, compression becomes a highly subjective topic, so experimentation is key to achieving the desired effect. As a starting point, therefore, try medium-fast attack and release times – an extremely fast attack time will blunt the transient response of the note. Remember that electric guitars can be inherently noisy and compression will generally exaggerate any hums and buzzes.
We’ve had a lot of fun looking at all of these great online guitar electric acoustics, and hope that among or top ten is your next instrument. There’s a lot to read through and consider, but we’ve been sure to make sure there’s something for everyone here, and all of the guitars come highly recommended. Read through the buyer’s guide if you’re new to electric acoustic guitars and aren’t 100% sure of what you’re comparing between electric and acoustic, and then make your purchase knowing you’ve made the right decision.
I skimmed ahead and quickly realized that, at last, someone has written THAT GUITAR BOOK that we are all looking for when we start out but that no one seems to have written yet but that you hope to write someday when you finally figure out what you are doing so that you can help others and prevent them from wasting so much time and money and hopes....(takes a breath)
A better way to get distortion, of course, is to use guitar effect pedals. Got your hands on some pedals and starting to play around with the sounds you can make? Well, you can still use these tips to further enhance your distorted tone, since the same theory applies. Most distortion pedals have a volume, gain, and distortion knob in addition to whatever additional controls they give you. If you're simply not satisfied with your pedal's guitar distortion, you can turn the gain up and adjust the other settings, just like you'd do on your amp.

Gibson did not take Fender too seriously at first; Fender were just an amplifier company that made a few guitars. They didn't regard the solid-body Broadcaster launched in 1950 as a serious musical instrument, lacking the depth of tone of a Gibson electric-acoustic. But music was changing, guitarists wanted different sounds, and music was getting louder. Fenders instruments proved to be more appropriate for the emerging musical scenes. Over the next decade Fender created a number of solid-body guitars that defined genres. Guitars like the Stratocaster, Telecaster and Precision and Jazz basses proved to be exceptionally popular and have stayed in production ever since.
Overstock SaleNew ProductsVacuum TubesSpeakersAccessoriesAmplifier PartsBooks & DVDsCapacitor Amplifier SetsCapacitorsCoversEffect Pedals & PartsEnclosuresFootswitch BoxesGift CertificateGrill Cloth, Tolex & PipingGuitar PartsHardwareJacks & PlugsKeyboard PartsKitsKnobsLuthier ToolsMaintenance ProductsPMT Tone ModsPotentiometersPower AccessoriesRadio & Antique Equipment PartsResistorsReverb TanksSchematicsSemiconductorsSpeakersSwitchesT-shirts/GiftsTech SuppliesTerminal Boards & StripsTransformers & ChokesVacuum Tube AccessoriesVacuum Tube Amplifier SetsVacuum TubesYellow JacketsZero Glide Nuts

Many consider the D-28 to be ultimate expression of the dreadnought form. ‘Reimagining’ such a guitar could be a poisoned chalice. Fortunately, you can still feel the gravity of that 184 years of history in its high-end guitars. The latest D-28 features forward-shifted bracing, a wider nut and vintage-style aesthetic changes, but it’s the new neck design that really makes this the most comfortable and accessible dreadnought playing experience we can remember for some time. The sound is balanced and maintains the very definition of an ‘all-rounder’. Notes ring out with sustain - that clear piano-like definition we love from Nazareth’s craftsmen. Harmonics come easy and, with strumming, the high mids and treble have choral qualities that don’t overshadow the lower mids. Despite the tweaks, our test model still largely feels like the acoustic equivalent of Leo Fender’s Stratocaster design. Just as that outline is most synonymous with ‘electric guitar’, so to the D-28 continues to embody the dreadnought in look and sound.
As the title suggests, solid body electric guitars don't have a chamber or hole the way that an acoustic guitar does; instead, they're made of solid wood. These are the most common type of guitars that you’ll find in shops or online stores. They're perfect for a wide range of musical situations. These guitars rely on the wood quality and their components to output sound. Below we’ll highlight four famous types of solid body guitars.
To create a thicker rhythm guitar sound, overdub the same part one or more times. Depending on the desired effect, the overdub can be treated as one mono signal and mixed to the same stereo position, or panned left and right for a stereo double-tracked sound. Alternatively, treat the original track with an ADT (Artificial Double Tracking) effect. This can be done with a digital delay set to around 40 milliseconds. Again, the delayed signal can be panned or mixed as one with the original guitar track.
With such a vast array of effects available, it can be hard to know where to start. One good way is to find out which effects your favorite players use. Artist interviews can be a great source of such information. Additionally, most players are happy to discuss their gear with fellow musicians. Talk to other guitar players you know, or chat up the guitarists or bassists at the local club before or after their sets.
A. Electric guitars either have bolt-on, set neck, or neck-through neck construction. Bolt on necks are simply bolted onto the body, set necks are set into the body and glued, and neck-through construction is where the neck extends all the way through the body. The latter is generally considered the best and most durable, but won't be found on cheaper guitars.
Some of the most well-rounded acoustics on the market. They may not boast the character of some of the big names like the Martins and Gibsons but they fit in most musical situations just as well. Remember that Takamine achieved its success by copying Martin guitars - and they did a good job. Also they have some of clearest and cleanest electronic preamp systems on the planet. In fact, they essentially pioneered the style of electronics that we see in most guitars today. While you can spend an arm and a leg on one, you don't have to. I've had Takamines under $1,200 that played phenomenally. Don't make your purchase until you've tried one out.
The majority of favoured mic pairs seem to include the trusty SM57, but its most popular partner appears to be the larger-diaphragm MD421 — users include Bob Rock, Bruce Fairbairn, Alan Winstanley, Joe Barresi, Simon Dawson, Stephen Street and The Matrix. Also high on the list is the pairing of the SM57 with a large-diaphragm condenser of some type, and Steve Churchyard, Toni Visconti, Jim Scott, Stephen Street, and John Leckie all name-check the U87 in this role.

R.E.M.'s guitarist was a less-is-more master who never needed much more than swarming melodies and spangled riffs. From the laser-guided arpeggios on "Radio Free Europe" to the supersize power chords of "The One I Love," his sound was both gorgeous and matter-of-factly aggressive – a DIY style that helped Eighties underground rockers push beyond punk rock. "They created 50,000 guitar bands after them," noted Billy Corgan, "America was inundated with jangly R.E.M. type bands."
THIS DELUXE PACKAGE INCLUDES - GIBSON'S LEARN AND MASTER GUITAR PACKAGE - PLUS 10 ADDITIONAL WORKSHOP DVDs. THIS IS THE MOST COMPLETE INSTRUCTIONAL GUITAR PACKAGE YOU CAN BUY. Winner of the Acoustic Guitar Magazine Players' Choice Award, two Telly Awards and an AEGIS Award for Excellence in Education, Learn and Master Guitar is widely recognized as the best home instruction course for learning guitar available anywhere. This deluxe package consists of 20 professionally produced DVDs, 5 Jam-Along CDs, a 100 page lesson book, and a free online student support site. It is the only instructional package you'll ever need on your journey toward mastery of the guitar.
Reverend guitars are known to sport many premium appointments despite their modest price tags. And the Jetstream HB is no exception. It has a comfortable roasted maple neck, a Wilkinson WVS50 IIK tremolo, pin-lock tuners and high-end electronic components. A korina body and a 12-inch-radius roasted maple/blackwood fretboard (depending on the finish) complete the other notable specs on this guitar.
Onboard effects had already appeared on various guitars, especially Höfner and Vox models, but these were not truly “active” in the modern sense. Alembic, with support from the Grateful Dead, was exploring active pickup systems, but these were still basically custom-made instruments. Both had a master volume and tone control with three-way select and a “band rejection filter tone switch,” also called a midrange bypass filter. Ovation was among the first to offer linear potentiometers to correlate movement with effect. Controls inside were mounted on a circuitboard with individual trim pots that can be adjusted to control the volume of each pickup.
We’ve already made numerous allusions to the “split” between Merson and Unicord, so now is probably a good time to talk about it. At some point (almost certainly 1975), Ernie Briefel of Merson decided to part company with Sid Hack’s Unicord. 1975 is the logical choice because flyers copyrighted 1975 are still identified as from Merson Musical Products, a Division of Unicord, Inc, a Gulf + Western Systems Company. All flyers from ’76 on are copyrighted by Unicord, Inc., a Gulf + Western Manufacturing Company. Briefel’s Merson subsequently relocated to Long Island and became Music Technology, Incorporated (MTI). This company took the distribution of Giannini guitars with it.

For 70 over years, Kiesel Guitars has been building the highest quality guitars, basses, pickups, replacement necks, kits and accessories for pro and hobbyist musicians alike. We offer a complete lineup of instruments, including carved top guitars, multiscale fanned fret guitars & basses, MIDI synth access guitars, headless guitars & basses, extended-scale baritone guitars, acoustic/electric guitars and basses plus signature models from Jason Becker, Allan Holdsworth and more. Our Custom Shop builds instruments in the USA from the highest quality materials, at a direct price that can't be beat, along with build times of around 10 - 12 weeks. Hundreds of options, including exotic woods, inlays, fretwire, hardware, pickups & electronics and more allow you to order an instrument perfectly suited to your playing style and personal tastes. click for more...
The body and neck are also slimmer than other Spanish guitar models, as well, so if you’re used to a steel-string, but gearing up to try a classical guitar, the Kremona Sofia is one to put on your list to try. The strings are Royal Classic Sonata strings, made in Spain, so add this to the guitar body’s manufacturing origins, and you will have a sound that is worthy of a professional, but affordable for just about everyone.
But there were already hints of the change to come, of the evolutions in music technology that would eventually compete with the guitar. In 1979, Tascam’s Portastudio 144 arrived on the market, allowing anybody with a microphone and a patch cord to record with multiple tracks. (Bruce Springsteen used a Portastudio for 1982’s “Nebraska.”) In 1981, Oberheim introduced the DMX drum machine, revolutionizing hip-hop.
Welcome to  This is my personal website for displaying photos of my various Ovation guitars.  I have been a player and collector of these fine instruments for over 30 years.  Although I don't profess to be an expert on all things Ovation, I do have a passion for their artistic and sonic beauty which I hope you will share.  My collection is always evolving, at one point  numbering over 50 guitars.  At one time or another I've been lucky enough to own almost every type of Ovation and Adamas guitar as well as some one-of-a-kind and truly collectable specimens.  All of these guitars are wonderful and it is my pleasure to share them with you on this website.     Dave   
It's pretty common that your fingers hurting at first. We all went through it. It does not matter what kind of strings you use. You will pay the price…. Think of it as a Right-Of Passage, or an initiation of sorts. If you think about it, everything in life that is pleasurable comes with a certain amount of pain that must be endured, whether it is financial, such as buying something you really want, emotional, as in love, or physical, such as building your muscles and playing sports.
The TG-64 was definitely a boss guitar, but even cooler was the TRG-1 transistorized guitar, also introduced in ’64. This guitar did Nat Daniels one better and, instead of putting the amp in the case, put a transistorized amp and speaker in the guitar! To be fair, Danelectro did produce some guitars with a miniature tube amp built-in, but it’s not known if these ever made it to production status. But the TRG-1 is a remarkable guitar available in a confusing number of variations.

An extremely wise Liverpudlian once said: "Life is what happens to you while you're busy making other plans." Well, we've been busy with life and now, after a few year's hiatus, it's time to present the first phase of our new collection. For your consideration are some truly unique guitars: Silvertones, Danelectros Harmonys, a Supro 60, an Eko Florentine, and many more. Also, did we mention for all you Shagg's fans, there's a pretty stunning Avalon AV-2T. There's more to come very soon, stay tuned. Welcome to!

One and one half steps down from Drop D. This tuning is most often used by modern rock and heavy metal bands. Utilized by bands like A Day to Remember, Slayer (on "Cast Down", "Seven Faces" and "Payback" from God Hates Us All, as well as few songs on Christ Illusion, World Painted Blood and Repentless), Slipknot, Intronaut, Down, Machine Head (tuned 40 cents sharp), Demon Hunter, Chevelle, Origin, Asking Alexandria on their third and fourth albums, From Death To Destiny and The Black respectively, RED (on "Faceless"), Parkway Drive, Skillet (on much of Comatose), Veil of Maya, Bring Me the Horizon (up until Count Your Blessings), Sevendust, Soilwork, Chimaira (on a few songs from The Infection), Eye Empire, Crown the Empire, The Devil Wears Prada, Drowning Pool, The Veer Union, Comfort in the End, Attack Attack!, Mark Tremonti (on much of Full Circle and All I Was, and the songs "Coming Home" and "Home" from Blackbird and AB III, respectively), Nickelback on the song "Side of a Bullet", Disturbed on Immortalized and occasionally Black Stone Cherry, Limp Bizkit, The Kills, and Sucioperro.

Description: Body: Maple - Top Wood: Spruce - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: Medium - Inlay: Acrylic & Abalone Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge Construction: Ebony - Cutaway: Single - Hardware: Gold, 2x Volume Control, 2x Tone Control - Pickups: GB Special - Pickup Configuration: H-H - String Instrument Finish: Brown Sunburst - String Instrument Accessories: Hardshell Case

The tremolo effect is a fluctuation in the guitar signal’s volume. By lowering and then raising the volume of the guitar you get a very cool effect. As you adjust the rate of the volume change you get faster fluctuations in volume. Tremolo is one of the early effects found on some  guitar amplifiers, though it was often mislabelled "vibrato." Vibrato is a variation in pitch, not volume. 

If you want to get this game, you have a few options. The game is $60 with no guitar cable included; this is the best bet for owners of the original "Rocksmith," as the cable that came with that game works here, too. If you don't have the cable, but have a guitar, the game costs $80. If you need a guitar, too, that'll run you $200 for an Epiphone Les Paul Electric Jr. guitar, plus the game and cable.
Considering that the setup on a factory-fresh guitar might be good or bad (and few music stores bother to do setup on inexpensive guitars), we strongly recommend that you have a new guitar professionally set up, which will likely cost about $50. You can also learn to do it yourself; there are plenty of online tutorials, and even at age 15 I managed to figure out how to set up my first electric guitar with a little guidance from my guitar teacher. It’s a good idea for every electric guitarist to at least learn how to set action (string) height because you will want to adjust this to suit your style and skills as they evolve.

In about 1975, Ernie Briefel and Merson parted company with Unicord/Gulf + Western, becoming Music Technology Incorporated (MTI), on Long Island, taking the Giannini brand with it. Later, in the early ’80s, MTI would import Westone guitars made by the great Matsumoku company, which it would sell until St. Louis Music began its partnership with Matsumoku and, in 1984, transitioned its Electra brand to Electra-Westone and then ultimately Westone, which lasted until 1990, when SLM’s guitars all became Alvarez.
On these guitar tracks, I did use a little bit of the 1176. I don’t overcompress on these tracks, I just basically want to get a little bit more sustain out of the notes, so I have it setup so that there’s plenty of attack that comes through. I’m not trying to control that so much as I am the sustain of the note, and get a little bit more length out of it, though I’m pretty gentle with that. Then it just goes into Pro Tools and I record it as is.
The RP360 XP lets you combine different effects to craft your preferred sound by choosing from its wide variety of options including 74 effects, 32 amp models and 18 cabinet models. Each setup can be saved into one of its 99 user presets, that allow for incredible flexibility. The interface has a bit of a learning curve, but allows for deep editing.
The "Slide Guitar Extension Nut" presents a bad case of convenience to the manufacturer (only having to make one size) disguised as a convenience to the customer (pretending one size fits all). This thing is not very versatile. With an outer string spread of 1.75", it's made for a wide guitar neck so if yours is only average, the outer strings will be suspended off to the sides of the overall width of the neck. That's not insurmountable but it's also not something every budding slide player wants to tolerate.
It is a German company that manufactures bass guitars. Making a really good bass guitar is a difficult task. However, Warwick bass guitars have really mastered this daunting task. The growl of the bass, and its hollow and beautiful resonating tone is a striking feature of the bass. The company employs stringent quality control methods in wood seasoning, cutting, and resonance engineering. It is highly regarded among bassists and has attracted many notable artists like Robert Trujillo (Metallica) and Adam Clayton (U2). One of the greatest things about Warwick is that they manufacture guitars for everyone, from amateur hobbyists to professional players. If you are new into electric bass guitars, then Rockbass Corvette Basic and Streamer Standard Electric Bass guitars are great options for a rocking start.
While the modifications described above have all been passive (i.e. they don't require an external power source), active electronics considerably increase the number of possible wiring options. These can range from simple preamps that offer a volume boost and buffer the instrument's signal (to prevent loss of higher frequencies in longer cable runs), to multi-band equalisers and more.[30][31] Enterprising guitarists have even built entire effects processors into guitars, such as the Korg Kaoss Pad.[32]
{"product":{"id":"J40301","stock":"","price":"149.00","name":"Les Paul Special Vintage Edition Electric Guitar","download":false,"sku_id":"","checksum":"93895071200","rep_id":"site51500000000013137","displayId":"1500000000013137","sku_rep_id":"","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
In 1931, Martin reintroduced the dreadnought with X-bracing and two years later gave it a modified body shape to accommodate a 14-fret neck, and it quickly became their best-selling guitar. The rest of the industry soon followed[citation needed], and today the “dreadnought” size and shape is considered one of the “standard” acoustic guitar shapes, iconic for its use in a wide variety of musical genres.

Generic PC audio cards often don’t have ASIO drivers. However, there is a freeware thing called ASIO4ALL - Universal ASIO Driver that can turn some of the low-level game friendly Windows audio interfaces (WDM streaming) into an ASIO driver, which is better than nothing. So if you’re going to start with your guitar going direct to the PC sound card, get this next.
Im sure are techs at these stores that aren't bad AT ALL, but when you don't know who they are, I wouldn't trust them with a truss rod while you're not there standing over trheir shoulder watching them. I may just be paranoid, but hey, better safe than sorry is the way I look at it. I've done my own setups. And I plan to keep doing it until the day comes when I order myself a custom bass that I worked my ass off for, then I'll be willing to spend $50 on a 'properly' done setup. I dunno
The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
{ "name": "Alpine White", "skuUrl":"/bass/epiphone-thunderbird-classic-iv-pro-electric-bass-guitar/h82691000001000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 549.00, "formatedIntegerValue": "549", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"36,16,7500006,36 Months Promotional Financing,10/28/2018,0% Interest for 36 months*. 36 equal monthly payments required. Valid through,549.0,false,/pages/Gear-Card-Rewards.gc", "msrp": 915.00, "salePrice": 549.00, "listPrice": 549.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","topSeller","flexibleFinancing","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuH82691000001000", "displaySku": "H82691 000001000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/H82691000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Thunderbird Classic-IV PRO Electric Bass Guitar Alpine White", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"4,392", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"397377354900", "restrictionType":"", "restrictionError":"" }
Since there are 2 coils, you can have up to 4 wires with which to work, providing you with a great many tone options. Almost all independent pickup companies manufacture humbuckers with 4 conductor cable. Stock guitar humbuckers rarely have 4 wires coming out of them but sometimes it is possible to convert 2 wire humbuckers to 4 wire types. This is an exacting procedure with little room for error but the tone rewards can be well worth the effort. If you really want to give this a try, then click here.
Specs for combos were as follows: Checkmate 10 (6 watts, 6″ speaker, two inputs, striped grillcloth); Checkmate 12 (9 watts, 8″ speaker, three inputs); Checkmate 14 (14 watts, 8″ speaker, three inputs, tremolo); Checkmate 17 (20 watts, 10″ speaker, tremolo, reverb); Checkmate 16 bass amp (20 watts, 10″ speaker, volume, tone); Checkmate 17 (20 watts, 10″ speaker, reverb, tremolo); Checkmate 18 (30 watts, two 10″ speakers, reverb, tremolo); and Checkmate 20 (40 watts, 12″ speaker, reverb, tremolo). Piggyback amps included the Checkmate 25 (50 watts, 15″ speaker, reverb, tremolo); Checkmate 50 (two-channels, 100 watts, two 15″ speakers, reverb, tremolo, “E tuner”); Checkmate 100C (two channels, voice input, 200 watts, two 15″ speakers, reverb, tremolo); and the big hugger-mugger Checkmate Infinite (200 watts, two 15″ speakers, stereo/mono preamp section, reverb, tremolo and a bunch of other switches). The one shown in the catalog actually has a block Teisco logo and carried the Japanese-marketed name – King – in the lower corner.
While the acoustic-electric guitar isn’t actually its own body type, it’s simply an acoustic guitar with electric pickups to amplify its signal (we’ll talk about pickups soon!), it’s worth mentioning that you’re almost never going to get a comparable tone to that of a hollow body or really, any kind of electric guitar. It’s just not built for that, and in fact, it’s almost always better if you want that acoustic sound, to buy a really resonant acoustic guitar and add a nice soundhole pickup (like this one) instead.
Great article and very enlightening comments too. One thing I’d like to add is that it seems to me that a considerably large expense is necessarily involved in going the ampless route i.e. Axe FX + midi controller at the least, in an Axe Fx setup. Granted, amp setups can be just as expensive or more expensive, but cheaper amp options are available.
The electrified hollow body arch top was created so the guitar could compete with the volume of horns in the big bands of the 1930s. And they’ve evolved considerably since then, growing from fat jazz boxes with necks that meet the body at the 12th fret to nimble, thin-lined instruments with cutaways like the Gibson ES-125 and Epiphone Casino, which are experiencing a renaissance today. From the single blade pickup in Christian’s guitar, modern hollow bodies now sport all types of pickups as standard equipment: humbuckers, single-coils, piezo-electric and so on.
Because of the miniaturization of all things electronic, you can now get full-sounding, authentic guitar sounds from a unit the size of a disposable camera — as long as you listen to it through headphones (meaning that it has no speaker or power amp of its own). These battery-powered wonders come with belt clips for untethered practicing (great for checking your stage moves in the mirror).
So far so obvious, right? But what's easy to miss is that this same scale shape also gives you A major and D major - they are the same chord shape, just starting on different strings. Now it's true that they're not quite the same physical shape, but that's just because of the funny little tuning 'kink' between the G and B strings (See Why is the guitar tuned like it is?). Once you iron that out, E, A and D are the same shape, as are the barre F and B chords.

This guitar is simply phenomenol and the build quality, materials, and attention to detail are just mind blowing! I have a collection of vintage Golden Era Gibsons, Fenders, Gretschs, and Martins, so it takes a very special guitar to impress me. The Kraus OM delivers in every way! Just check out the rosette: Paua shell bordered by curly Koa wood inlayed into a red Spruce top-simply amazing! And the curly koa fretboard binding is a sight to behold! The Honduran Rosewood is becoming exceeding hard to find, and will probably go the way of Brazilian Rosewood as a protected wood soon. The Honduran Rosewood used on this guitar took months to source, and it looks spectacular! The guitar itself took 16 months to build, and the wait was well worth it, and well beyond expectations!
Their are also guitars made with a "compound radius", which is a little rounder in the lower register, and a little flatter in the higher register. The true best of both worlds. Warmoth makes necks with a 10"-16" compound radius, as do some production guitar companies. I have a custom made guitar with a 16"-24" compound radius, and it's REALLY flat. Takes some time to get used to. It's breeze to rip on, but not nearly as comfortable to play rhythm on as my other guitars.

The SIX6FDFM’s jaw-dropping aesthetics belie its price tag. It has an arched flame maple top on a bound mahogany body, a bound ebony fretboard, and a three-piece maple/purpleheart neck that has a colorful streak running down the middle. Only a Blue Space Burst finish is available, but, coupled with a matching headstock, it looks good enough to lick.
Many guitarists with instruments that have more than one pickup spend most of their time on the bridge unit. Using a variety of pickup positions when recording will thin or fatten the sound as required, but also help free up space when it comes to the mixing stage. Think of a recorded mix as a layer cake; too much density in one frequency range will cause a headache for the mixing engineer.

The guitar is hand-made by Martin's top luthiers, using exotic cocobolo wood for the back and sides, mixed with a more conventional solid sitka spruce top. As expected from a high-end instrument, this guitar features impressive visual appointments, most notable of which is its ivoroid binding, beautiful rosette and fretboard inlays. While its price tag and looks may push you to just hide this guitar in the closet, know that this instrument is built to make music in the road or in the studio. Martin employed modern bracing and construction techniques to ensure the guitar stays reliable, beautiful and great sounding for a long time. Those that are lucky enough to own this guitar have themselves a treasure that they can pass down to the next generation of players.
Up for sale is an Ibanez RGA32 guitar equipped with Metal Works Brushed EMG 57/66 pickups and Sperzel locking tuners. This guitar is in great condition, has never been gigged and has been kept in my smoke free music studio. Guitar Specs: Mahogany body with quilted maple top 3-Piece maple Wizard II neck Bound rosewood fretboard with 24 jumbo frets Gibraltar Standard bridge Pearl dot inlay
The classical guitar repertoire also includes modern contemporary works – sometimes termed "New Music" – such as Elliott Carter's Changes,[17] Cristóbal Halffter's Codex I,[18] Luciano Berio's Sequenza XI,[19] Maurizio Pisati's Sette Studi,[20] Maurice Ohana's Si Le Jour Paraît,[21] Sylvano Bussotti's Rara (eco sierologico),[22] Ernst Krenek's Suite für Guitarre allein, Op. 164,[23] Franco Donatoni's Algo: Due pezzi per chitarra,[24] etc.

My very strong opinion is that you should find an experienced guitar player, who plays in the style that you aspire to.  Tell them very clearly that you want help finding a beginner guitar that is in good condition and is easy to play.  Don't worry about resale value, looks, brand prestige, etc..  Get that person to help you find something that you can afford.  This is especially true for acoustic guitars (easy to play electrics are easier to find).  This might very well be a used guitar.  Try hard not  to buy a guitar because a salesperson told you it was a great beginner guitar and that it would be easy to play -- unless you really, really trust that salesperson.  It is true that the more money you are willing to spend then the easier it will be to find a guitar you can easily learn on but there are cheap guitars out there that will fit the bill.

A. Many professional musicians invest thousands of dollars in high-end guitars made from expensive and rare tonewoods. A $100 student guitar made from spruce is not going to produce that level of tonality regardless of the player’s skill level. As a beginner, your main focus should be on skills such as chord formation, fretting techniques, and basic scales. Improving tonality and performance are long-term goals.
Korg SDD3000 Preamp Clone Great project! Since I finished it, it become one of my always on pedal! With a extremely subtle compression... Eclipse Device-2 DOPAMINE OVERDRIVE based on the Klon Centaur circuit. Materials: 01. Xicon 1% metal film resistors. 02. Kemet 5% MLCC (C0G) 03. WIMA Box Film... Refractor Black Octopus Pedalworx More build reports
Starfield was a guitar brand owned by Hoshino Gakki. In the 1970s, Hoshino Gakki and Kanda Shokai shared some guitar designs and so some Ibanez and Greco guitars have the same features. The Kanda Shokai Greco guitars were sold in Japan and the Hoshino Gakki Ibanez guitars were sold outside of Japan. From 1982, Ibanez guitars have also been sold in Japan as well as being sold outside of Japan [3].
Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
The Supro line continued to grow in 1938, as can be seen in the CMI catalog. Still around was the Supro Spanish Guitar, now called the Supro Avalon Spanish Guitar, other than the name change (which is not featured on the guitar, as far I can ascertain), it is identical. Gone are the wood-bodied, frumpy-pear Supro Hawaiian Model and the Model D amplifier, although a Supro Special amplifier is mentioned (and not described) as being available for $40, the same price as the Model D. One and the same?
Fender: Fender guitars are the best example of the old saying “Keep it simple”. They aren’t futuristic, there’s nothing unique about them, they are kinda too simple, their craftsmanship isn’t astronomical but when it’s about outright ruggedness rarely any other guitar comes close to them. Leo Fender designed the Fender guitars to be reliable working man guitars and they still hold true to that quality of theirs. I’m pretty sure if someone buys a good quality Fender guitar (especially the Tele) pretty much his sons, grandsons will still be able to play on that.
Wah – a frequency-based effect that creates a sound similar to a voice saying “Wah”. A Wah pedal uses a filter that sweeps across the frequency band. In a pedal wah, pressing the toe down will make the guitar signal brighter; heel down makes the signal darker. The filter can be controlled either automatically by electronics within the pedal or manually by the use of an expression pedal giving the guitarist’s hands-free control over their tone.
To create a thicker rhythm guitar sound, overdub the same part one or more times. Depending on the desired effect, the overdub can be treated as one mono signal and mixed to the same stereo position, or panned left and right for a stereo double-tracked sound. Alternatively, treat the original track with an ADT (Artificial Double Tracking) effect. This can be done with a digital delay set to around 40 milliseconds. Again, the delayed signal can be panned or mixed as one with the original guitar track.
Tinkering with the 100+ effects and 30 amp models available using the small screen on the HD500X is not the best experience. The screen is simply too small, and we much prefer the more intuitive stompbox-like layout of the Zoom G3X. You can use up to 8 effects/amp models for a patch at the same time, but can only tweak one at a time. If you hook up your HD500X to your computer and use their software editor, it’s a game changer. The editor software lets you do everything you can on the unit, but with a much bigger (not to mention color) screen - WAY easier than editing on the relatively small, monochrome screen of the HD500X. You can do live editing on the software, drag and drop things in your signal chain (which you get a nice visual representation of), and it applies and syncs immediately. This is by far people’s preferred way to edit on the HD500X, but unfortunately it means you need your computer with you. Since editing all the effects’ parameters is not as immediate as on the Zoom G3X, you can unfortunately find yourself tweaking things to death and figuring out all the settings, rather than just playing and creating new music. As one user puts it:
Created four identical test rigs out of scrap wood from my workshop. They are all 725 x 35 x 47 mm in size, and weigh 651 grams (Alder), 618 g (Koa), 537 g (Swamp Ash), and 818 g (Zebrano). They obviously don’t exactly mimic a guitar, but should for the sake of the test resemble the type of tensions and forces that a guitar body with a neck is subjected to.
Except if, like George Gruhn, you know better. The 71-year-old Nashville dealer has sold guitars to Eric Clapton, Neil Young, Paul McCartney and Taylor Swift. Walking through NAMM with Gruhn is like shadowing Bill Belichick at the NFL Scouting Combine. There is great love for the product and great skepticism. What others might see as a boom — the seemingly endless line of manufacturers showcasing instruments — Gruhn sees as two trains on a collision course.

The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
At the more reasonable end of the price scale compared to other Gretsch guitars, sits the Gretsch G2655T Streamliner. While not an arch top like the guitars listed previously, this guitar does feature a hollow bodied design. As such, it perfect for clear, ringing chords and lead lines. Also in its favour is the G2655T Streamliner’s thinner body depth. This makes it more comfortable and slightly less cumbersome than the bigger, more traditional jazz guitars. You’ll also get more versatility from a ‘regular’ semi acoustic, meaning you can dabble in blues, rock and country with the Streamliner models.
Automatic Track Creation & Loop Recording: A new layer (track) is created each time you start recording and each time a Riff loops. Stack layers on top of each other (bass, guitar, vocals) to create a Riff. Use looping to create multiple tracks, do multiple takes, etc. Each layer has controls for mixing and effects. (4 tracks with T4, 24 tracks with Standard)
Primarily, people also use Mahogany wood to construct the guitar neck. Since it’s able to prevent the neck from warping, you’ll never have to worry about any impact that can deteriorate the quality of sound. Furthermore, the body ends up with a spruce top. In comparison with cedar, spruce is much brighter and provides better echoes through the instrument.
Even with a H-H configuration, you could utilize coil splitting to achieve single coil-ish sounds. While arguably this does not give a "true" single coil sound, if humbucker sounds are mainly used, this can be enough. My impression is that most people aren't using the middle position that much, I think the way forward is to try different pickup configurations to find out what you need.
Many Sixties rock acts made political statements, but the MC5 were among the first rockers to make a serious commitment to revolution, aligning themselves closely with the White Panther Party (a Black Panther offshoot organization) and effectively serving as the White Panthers’ agitprop machine. Their blue-collar Detroit roots lent a certain gritty gravitas to their stance. These weren’t effete rock stars dabbling in left wing chic but working-class guerrillas with ammo belts strapped across their bare chests and guitars brandished as rifles.
The GT-70 was a re-styled two-pickup, single-cutaway recalling the F-55s. The cutaway retained the wide horizontal angle of before, however the upper bass bout received a more graceful treatment, with a slight inward curve as it met the neck at the 16th fret. The controls were the same as before; the elevated pickguard had become a large white affair, the tailpiece was the V-notched Bigsby. Pickups remained our familiar DeArmond humbuckers. Gone were the plastic bridges in favor of metal adjustable finetune variety. Finishes were either burgundy or black. The first prototype serial number was 203803. Around 1,450 of these were made between January of 1966 and October of 1968.
Due to the acoustic, aesthetic and processing properties (workability, finishing, joints) the wood and the ligno-cellulose composites are the most valued materials for the musical instruments' construction. The guitar is made up of a complex structure, formed by a vertical wall in a curve shape (technologically named "sides") and two faces made up of ligno-cellulose plates, so that it should... [Show full abstract]
The SG Special by Epiphone is our hands down top pick. As you'll know by know, Epiphone is one of the best guitar manufactures in the business – so the quality of this guitar is absolutely amazing. Its epic red devilish double-cutaway design gives easy access to all 22 frets. It has a hard maple neck and a slim taper D-profile which ensures durability and rigidity. The fretboard is made of rosewood which makes it easy to learn to play. This guitar is all about that rock sound - it's equipped with two open-coil and noise-free humbucker pickups. The hardware is carved from nickel and is available in two dazzling finishes, cherry, and ebony.
If you are a first time builder or an experienced professional you know the value of building your instrument on a solid foundation. The Custom Shop Jag body is beautiful, high quality and made to spec. The Allparts neck is manufactured under license by Fender. The materials and quality level meet the standards set by Fender. Using these high quality materials will give you the sweet tone and sustain you are looking for.

Learning guitar chords is often one of the first things beginner guitarists do. You only need to know a few popular chords in order to be able to play a huge amount of songs. This beginner’s guitar chords article will provide you with the necessary chords you’ll want to learn for both beginner and intermediate players. Before jumping into learning the chords provided in the guitar chords chart below, I wanted to first explain what a guitar chord actually is. What Is a Guitar Chord? As wikipedia defines it, “a guitar chord is a set of notes played on a guitar”. Although a
Frets on finished fingerboards may be tough to measure accurately when the finish has appreciable thickness (think Rickenbackers, 70s Fenders) as these manufacturers spray the finish over the fretted neck.  I have measured a finish chip from a 70s Fender maple neck refret that was .010” thick – lowering the fret height by .010” (25% in the case of the stock medium wire at the time) from just finish alone.  I recently refretted a 2008 Fender Eric Johnson Strat where the fret height prior to any work was .040”, yet the crown of the fret removed from the fingerboard was .045”.  I personally do not like this feel and so often I will suggest refretting over a finished fingerboard when working with them rather than under the finish.
When people ask "What are the guitar string sizes?" they really want to know about the gauges, the term referring to the diameter of the string.  The answer is... that's not quite how it works.  Yes there are standard gauges but in several standard sizes like light, medium, and heavy.  Each, when properly tuned, will exert a different tension on the guitar's neck and if you jump to another size you'll probably need to adjust the truss rod and get used to the new action of the fingerboard.

Even with tone control maxed some high frequencies get cut. To let all the frequencies through you can either get a no-load pot or make one. CTS makes them for Fender and what they do is simply break the connection between the wiper and conductive element when pot is maxed. Additionally, they have an indentation so once they reach maximum setting they “click” and it’s not that easy to turn them back. To make your own just cut (or cover with nail polish) the element near the end, so that resistance between the wiper and the opposite lug reads infinite when maxed, at lower settings it should read as usual.
Matthias Karl Hohner, son of Dipl.-Ing. Matthias Hohner and a direct descendant in fourth generation and name bearer of the founder Matthias Hohner, was one of the last members of the Hohner dynasty involved in managing the family business, between 1968 and 1986. His son Matthias Francisco Hohner belonged to the first generation of direct descendants who did not enter into the family business. Many direct descendants of the founder are still active as members of the "Deutsches Harmonika Museum" and the "Hohner'sche Familienverein".
Whatever budget you’re on, you will always be able to find a suitable guitar. Even in the $100 price range you can find some models that play nicely. However, in that super-budget market there is a lot of garbage, so be careful. There’s a difference between ‘affordable’ and ‘cheap’, so do your research before buying something that may offer no value.
Dogwood Guitars is a full-service setup and repair shop. We are equipped to handle all of your acoustic and electric guitar adjustment and repair needs. The prices listed below are labor estimates and do not include parts such as new strings, bone blanks, fret wire, etc. I give free no-obligation evaluations of any guitar so that you can make an informed decision about your instrument and its care. Guitars are like cars; they need some routine maintenance to perform at their best.

This is an amazing acoustic guitar for the new generation of guitarists that is quite presentable, especially in stage performances. It comes with a black border and has a free gig cover. The fret board is made from rosewood, which makes it quite easy to handle. It has incredible rigidity, with truss rods on both sides. It produces a considerably high quality of sound and is cost effective with prices ranging from about INR 4,999. This may sometimes be accompanied by free packing and shipping. Find more information on the site link below:
We have arrived at the bottom of this extremely detailed buying guide and recommended guitar reviews. If you have made it here, congrats, you are officially a guitar know-it-all. Of course, the world of electric guitars is huge and there is still a lot to learn if you want to know more. But these are the basics. If you know these, you will be able to confidently pick the best electric guitars for yourself and be proud of it.

Classical guitars have nylon strings, which are softer than steel strings, and easier to press down. However, the neck is much wider on a classical guitar, which can be a struggle for beginners. The action is likely to be higher, as well. In general, they are softer-toned and don't project as well as a steel string acoustic, which makes for quieter practising, which could be a consideration.

From its beginnings in 1970, Mesa/Boogie was beloved for its small-but-powerful Mark series amps; in 1989, however, the company decided to take its game to a new audience. The result was the Rectifier range of bigger and beefier Dual and Triple Rectifier amps. Since then, the Dual Rectifier has become one of the most popular rock amps on the planet.
If you have been playing for a year or two and are looking at something to replace your current model, it would be wise to save a little more and go for a mid-range guitar that may cost between $300 and $500. On this kind of guitar you’ll notice a big difference in sound, as well as the feel of the instrument and the overall playability. Use this page as a starting point to find something that may suit you. Until then, you are probably best off sticking with your current guitar.

The Dobros and Nationals were joined by the first Supro guitar versions in late 1935, even though their announcement didn’t appear until a few months later in the March, 1936, The Music Trades. These first Supro guitars included an aluminum Hawaiian lap steel, both electric Spanish archtop 6-string and tenor guitars, and an electric mandolin. They mark the official beginning of the Supro story.
Replacing switch and jack covers. These are the plastic or metal covers that hold the jack and tells you witch switch is treble or rhythm. The switch cannot be repaired and will need to be replaced, however, a metal jack plate can never break and only will need to be cleaned. A plastic plate will need to be replaced or the screw holes need to be resized, do so properly and make sure every fastener is snug including screws and nuts.
Home>Guitars, Amps, and Effects >Electric Guitars >Electric Guitars: 6-String PrintRefine your searchBy BrandCharvel (26)D'Angelico (28)Dean (32)Epiphone (65)Ernie Ball Music Man (30)ESP (67)EVH (7)Fender (141)Fret-King by Trev Wilkinson (3)Gibson (118)Godin (2)Gretsch (49)Guild (11)Hagstrom (9)Hamer (5)Ibanez (122)Jackson (54)Kramer Guitars (4)Line 6 (6)PRS Guitars: Paul Reed Smith (47)Reverend Guitars (9)Schecter (51)Squier (23)Steinberger (2)Sterling by Music Man (15)Supro (3)Taylor Guitars (6)Washburn (1)Wylde Audio (5)Yamaha (5)Play as you Pay® Eligible4-Payment Plan (542)6-Payment Plan (921)8-Payment Plan (885)12-Payment Plan (743)By Price$100 - $149 (5)$150 - $199 (19)$200 - $299 (24)$300 - $399 (60)$400 - $499 (73)$500 - $749 (183)$750 - $999 (233)$1000 - $1999 (245)$2000 - $2999 (93)$3000 - $3999 (65)$4000 - $4999 (34)$5000+ (13)Availability In Stock Items (860)Clearance Gear (229)By ConditionNew (914)Blemished (221)Scratch and Dent (18)Viewing products that ship to: Customer Kudos "zZounds is the best online company I've ever dealt with hands down." - Customer on October 21, 2017 1 MILLION+ Happy Customers learn more Guitar·Bass·Keyboard·Recording·Computer Audio·Live Sound·Drums·DJ·Accessories
Ibanez has always been a company that breaks new ground. For starters, they led the way for Japanese guitar makers to become a force to be reckoned with in music stores and stages all over the world. But, even more significant than that, they pioneered seven and eight-string guitars, laying the groundwork for others to follow in their footsteps and bringing these extended-range axes into the mainstream for the first time.  There's an Ibanez axe to cater to any player's sound. Rockers Steve Vai and Joe Satriani use Ibanez electric guitars, for example, and they can be heard in alternative metal with Mick Thompson of Slipknot as well as power metal from Dragonforce's Herman Li and Sam Totman. On the other end of the musical spectrum, there are the smooth jazz performances of George Benson and Pat Metheny. While their styles are as different as they come, the one thing that all of these artists have in common is that they each have their own signature model Ibanez guitar.
A spring reverb unit is really a small amplifier in itself, that sends the guitar signal through a tube circuit to a small output transformer (or through a transistorized circuit) and from there to one end of the springs in a spring can rather than to a speaker. This signal vibrates the springs, is picked up by a transducer at their opposite end, and from there is blended back with the dry signal by degrees determined by a “depth” control, and sent on to the output (or the power tubes, if part of a guitar amp). As you can image, it’s a bulky effect when achieved in this way, requiring at least a couple of transformers, two or three tube sockets and a spring can, but the circuit itself is fairly simple.
“Guitar has always been an extension of my thoughts without having to put it into words,” says Marcus. “It’s a form of meditation allowing my mind to cut off and to speak through the instrument.” Players often say this sort of thing and it’s often nonsense, but before you scoff, listen to the live medley on 2017’s Due North EP and you’ll hear the truth in this statement. A new King is born? We think so.
String Tension: Acoustic guitars must be built stronger, because the tension of the metal strings is approximately twice that of nylon. This is done with bracing. Any acoustic guitar top must be thin enough to resonate, but so thin that the top alone could not hold it together against the string tension. The bracing adds strength with a goal of minimal damping of resonance. Bracing patterns vary widely, but most Spanish guitars use "fan bracing" and most acoustics use "X bracing."
{ "thumbImageID": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Antique-Olive/J46191000006000", "defaultDisplayName": "Fender American Professional Stratocaster Rosewood Fingerboard Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Candy Apple Red", "sku": "sku:site51500000138951", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Candy-Apple-Red-1500000138951.gc", "skuImageId": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Candy-Apple-Red/J46191000007000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030457", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Antique-Olive-1500000030457.gc", "skuImageId": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Antique-Olive/J46191000006000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000030454", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Black-1500000030454.gc", "skuImageId": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Black/J46191000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030455", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Sonic-Gray-1500000030455.gc", "skuImageId": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Sonic-Gray/J46191000005000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sienna Sunburst", "sku": "sku:site51500000030456", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Sienna-Sunburst-1500000030456.gc", "skuImageId": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Sienna-Sunburst/J46191000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51500000030240", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Olympic-White-1500000030240.gc", "skuImageId": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-Olympic-White/J46191000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000030239", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-3-Color-Sunburst-1500000030239.gc", "skuImageId": "American-Professional-Stratocaster-Rosewood-Fingerboard-Electric-Guitar-3-Color-Sunburst/J46191000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }