Guitars are constructed from different wood types—from mahogany to rosewood, basswood to maple, and more—all of which changes with temperature and humidity, affecting the sound quality thereof. Although guitars original setups are likely to change as they move a long distance from the producer to the Sellers’s point of contact, electric guitars are the highly adjustable piece of types of equipment, and a setup can make a whole difference.
Chord CG-10Classically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, EQ and outputs. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones.•Headphone output for practice•Switchable clean and drive channels•Classic styling•Power supply; 230Vac, 50Hz (IEC)•Model: CG-10•Output: 10Wrms•Speaker; 165mm (6.5")•Controls: Gain, drive switch, volume, treble, middle, bass•Connections: Guitar input, headphones out (6.3mm jack)•Dimensions; 290 x 280 x 150mm•Weight: 4.0kg
Australian singer Frank Ifield also owned and used a Maton guitar, which he later had fitted with a custom-made scratch plate, made in the shape of a map of Australia. Frank gave this instrument to his guitarist Ray Brett when he returned to Australia, and it has been featured on an episode of the BBC programmeAntiques Roadshow. Although these guitars are now normally worth around UK£2,000, expert Bunny Campione valued Ifield’s guitar at between UK£10,000 and UK£15,000, because Ifield had used it in songs featured in a compilation album alongside The Beatles‘ first two singles.[2]
Some pedals, such as clean boost pedals and transparent overdrive pedals merely provide a much powerful signal to feed into the preamp section of the amp, causing natural overdrive. Overdrive pedals can provide both a boosted signal and an already distorted signal. Distortion pedals have different kinds of circuits that provide different kinds of distortion; the pedal provides an already distorted signal. Digital overdrives and distortions rely on electronic means of producing the signals, with some resorting to modeled sounds.

Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.
In the 21st century, European avant garde composers like Richard Barrett, Fausto Romitelli, Peter Ablinger, Bernhard Lang, Claude Ledoux and Karlheinz Essl have used the electric guitar (together with extended playing techniques) in solo pieces or ensemble works. Probably the most ambitious and perhaps significant work to date is Ingwe (2003–2009) by Georges Lentz (written for Australian guitarist Zane Banks), a 60-minute work for solo electric guitar, exploring that composer's existential struggles and taking the instrument into realms previously unknown in a concert music setting.
Amazingly well made and a beautiful guitar. The finish is incredible, it looks like a guitar that should cost a $1000 and up. Mine is the red color and found it in a pawn shop looking very rough, price on it was $99 and at first I thought it looked like a $99 guitar so I didn't pay any attention to it. I was looking a some Epi SG400s and a couple of Gibson's but for some reason I went back to the Samick. I had some cleaner with me and I grabbed a rag and started cleaning it up, after a few minutes of scrubbing this beautiful guitar appeared. I plugged it in along with the Epis and Gibson SGs and played them side-by-side and I was amazed at the sound I was getting from the Samick. I compared it along with the other SGs and the finish and the build quality smoked the others. I am all about American made guitars but this Korean made SG has completely changed my opinion about Asian made guitars, especially when I compared it to a $900 Gibson. I wasn't even looking for a new guitar but I couldn't let this one get away. I bought it and have played it for hours every day for the last week. It's amazing, the neck is the smoothest and easiest to play that I've ever seen, I like it much more than my Ibanez RG with the Wizard II neck I've got. I am now looking out for other Samick Artists Series guitars and if you see one for a good price try it out.
Also new in ’39 was the Supro Collegian Guitar Family. This consisted of a number of metal-bodied resonators, the No. 25 Spanish, No. 26 Hawaiian, No. 27 Tenor, No. 28 Mandolin, and No. 29 Ukulele. These had metal bodies made of brass – no doubt leftover Style 97 and Style 0 National bodies – and painted a yellowish maple color, with a clear plastic pickguard. This latter guitar took over the bottom of the National resonator line, pushing out the Duolian, which was no longer offered. All but the uke cost $35, the uke $20.
Get it tuned up and play it in the store. Some people may find this uncomfortable, being a newbie and all. If you don't want to play it, just start bending strings, up and down, using the whammy bar; think of it as 'guitar stretching'. Then see how well it stays in tune. If this guitar has no locking nuts on the head, and it still stays in tune, it's a winner. But if you have to re-tune more than a little, and almost all the strings, pass on it. You will grow frustrated by it very quickly.
The United States Department of Justice found emails from 2008 and 2009 in which Gibson employees discussed the "gray market" nature of the ebony wood available from a German wood dealer—who obtained it from a supplier in Madagascar—as well as plans to obtain the wood. It filed a civil proceeding in June 2011,[40][43][44] the first such case under the amended Lacey Act, which requires importing companies to purchase legally harvested wood and follow the environmental laws of the producing countries regardless of corruption or lack of enforcement.[44] Gibson argued in a statement the following day that authorities were "bullying Gibson without filing charges" and denied any wrongdoing.[39][45] Arguing against the federal regulations and claiming that the move threatened jobs, Republicans and Tea Party members spoke out against the raids and supported Juszkiewicz.[46]
The Fender Stratocaster may be the most widely recognizable electric guitar and the one most associated with the rise of rock and roll music. It featured a distinctive double-cutaway design that allowed musicians to play higher notes by reaching higher on the fingerboard, three pickups (which allowed for a greater range of sounds since previous guitars which had two pickups at most), and a patented tremolo system that allowed players to raise or lower the pitch of the strings. In the hands of guitarists like Buddy Holly, Eric Clapton, Bonnie Raitt, and many others, the Stratocaster became an icon of American rock and roll that took the world by storm. The Stratocaster, the Gibson Les Paul, and other solid-body electrics were nothing if not versatile, and rock guitarists were obsessed with versatility. Guitarists could not only change the tone, volume, and pitch, but they also could manipulate the sound by playing close to the amplifier, grinding the strings against things, and using special effects accessories like the wah-wah pedal. Jimi Hendrix was this instrument’s master of manipulation, influencing generations of guitarists to experiment creatively with their playing techniques and equipment.
Leo Fender’s simple and modular design was geared to mass production, and made servicing broken guitars easier. Guitars were not constructed individually, as in traditional luthiery. Rather, components were produced quickly and inexpensively in quantity and assembled into a guitar on an assembly line. The bodies were bandsawn and routed from slabs, rather than hand-carved individually, as with other guitars made at the time, such as Gibsons. Fender did not use the traditional glued-in neck, but rather a bolt-on. This not only made production easier, but allowed the neck to be quickly removed and serviced, or replaced entirely. In addition, the classic Telecaster neck was fashioned from a single piece of maple without a separate fingerboard, and the frets were slid directly into the side of the maple surface—a highly unorthodox approach in its day (guitars traditionally featured rosewood or ebonyfingerboards glued onto mahogany necks). The electronics were easily accessed for repair or replacement through a removable control plate, a great advantage over typical construction, in which the electronics could only be accessed through the soundholes in the case of hollow-body instruments, or by taking off the pickguard after removing the strings (in a design popularized by Fender’s own later guitar model, the Stratocaster).
Gold trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
ESP calls the body shape "Eclipse", which in the case of this guitar, is crafted from mahogany and paired with an arched flame maple top. The body is then wrapped in amber sunburst finish that complements the beautiful grains of the top. The guitar has a maple neck with a thin U profile and a 24-fret rosewood fingerboard. It is meant to play fast and smooth, with its 24.75" scale length and narrow 1.65" nut width. ESP opted for two Seymour Duncan pickups for this guitar, the '59 Humbucker for the neck and the hotter JB Humbucker on the bridge - both of which can handle both clean and high gain tones.
This is one of the most popular guitar brands bought by the beginner and advanced learners in India. This brand is also one of the top-rated electro-acoustic guitars for beginners. This is the Japanese brand of guitar that is available in acoustic, bass, electric, and classical guitars styles. It flourishes a full-size frigate shape with a laminated select dapper top, and mahogany back and sides. It sports a mahogany neck, with a rosewood fretboard and 20 frets, withal an Ibanez-branded headstock with pretty good closed chrome die-cast tuners. The price of this brand of guitar starts from 13,000 approximately.
Nothing compares to a Martin. The craftsmanship and attention to detail is impeccable, and the sound: the sound. The sound is like heaven. If you're used to an electric, a Taylor may feel more comfortable, but nothing compares to the timbre of a Martin acoustic. In the right hands, the bass and treble are perfectly actuated. None of that "tinny" Taylor quality which - while useful in certain applications and seems "easier to play" - cannot hold a candle to the the deep, rich, nuanced tone of a Martin acoustic. Bob Dylan, Neil Young, Johnny Cash, Willie Nelson, Woody Guthrie, Eric Clapton... Need I say more? I own a D-35, and I wouldn't be caught dead without a Martin guitar in my arsenal. Complete, unequivocal perfection.
First, you have 11 different modes, including the TonePrint option, just like the Flashback delay. Then you have a true bypass circuit with an analog dry-through signal, which perfectly preserves the natural tone and EQ of your acoustic guitar (again, similar to the Flashback's setup). When you're using the effect, we would advise tinkering with the mix to get about 35-50 percent of your dry signal coming through.
The reason for their order boils down to the evolution of the stringed instrument.  By adding a string or two, shortening the neck, and arranging them in a Perfect 4th Interval you can increase the speed of playing and reduce strain on the hands and wrists.  Other interval layouts were toyed with but had some harmonic problems that couldn't be ignored.
The same goes for Electrovoice's RE20, which counts Steve Albini, John Fry, and especially Glenn Kolotkin amongst its friends. "I like to use RE20s on most amplifiers when they're available", says Glenn, "because the quality is great and they can take really high levels. They're very directional and they're great for rock and roll." The mic also exhibits an unusually wide and flat frequency response and is specially designed to resist proximity effect.
If, like me, you're a complete and utter sucker for watching musicians strip their songs down to the barest essentials and perform them with minimal accompaniment, then you're going to lose your mind over the stripped down, guitar version of "Wildest Dreams" that Taylor Swift has just dropped from her acoustic session at the Grammy Museum Sessions last year. Performing the hopelessly dreamy song with just her voice and her electric guitar, the performance is jaw droppingly good and the song honestly sounds even better than it does on the studio track from 1989.

If you’ve never listened to Chet Atkins, you should do it right now. The rockabilly player was a skilled instrumental guitar player, playing most of his songs without any backing from other musicians. For a great sample of his talent, give a listen to his version of “Mr. Sandman.” His alternating thumb rhythm and syncopated melodies are marvels of beauty and precision on the instrument.


	Seagull Maritime	The Seagull Maritime acoustic guitars are made of all-solid tonewoods, making them a great option for those looking for the best acoustic guitar with a full sound. The top is made from pressure-tested solid spruce while the sides are made of solid mahogany wood for a well-balanced tone. The craftsmanship is superb and it has the sound quality to match.	

This is another best budget electric guitar from Epiphone. It is also a great choice for a beginner and it is quite lightweight to carry. For an inexpensive guitar, this one has a pretty good sound and tone. Despite being low priced, the manufacturer has not compromised in its quality. The cherry red color is really attractive and appealing and can help you to boost up your smart personality as a guitarist. This is closer in look to the iconic rock guitars.

I've been playing guitar actively for 40 years. I was looking for a dreadnought cutaway with pre-amp. At this price point there isn't a better made guitar. I would have to spend 2-3 times as much for rosewood back, sides, fret board and saddle for a Taylor or Martin.My first guitar was a Yamaha, so I was happy to find another that took me back. It is aesthetically flawless. I think the Fishman in my Martin Custom X is a tad stronger but I can EQ that; and I love the tuner. If it matters to you, it is made in China. (I thought Yamahas were Japanese).Sounds amazing un-plugged with great bottom end. Very pleased.
In 1959, with sales under pressure from the more powerful Fender Twin and from The Shadows, who requested amplifiers with more power, Vox produced what was essentially a double-powered AC15 and named it the AC30. The AC30, fitted with alnico magnet-equipped Celestion "blue" loudspeakers and later Vox's special "Top Boost" circuitry, and like the AC15 using valves (known in the US as tubes), helped to produce the sound of the British Invasion, being used by The Beatles, The Rolling Stones, The Kinks and the Yardbirds, among others. AC30s were later used by Brian May of Queen (who is known for having a wall of AC30s on stage), Paul Weller of The Jam (who also assembled a wall of AC30s), Rory Gallagher, The Edge of U2 and Radiohead guitarists Thom Yorke, Jonny Greenwood and Ed O'Brien. The Vox AC30 has been used by many other artists including Mark Knopfler, Hank Marvin who was instrumental in getting the AC30 made, Pete Townshend, Ritchie Blackmore, John Scofield, Snowy White, Will Sergeant, Tom Petty, The Echoes, Mike Campbell, Peter Buck, Justin Hayward, Tom DeLonge, Mike Nesmith, Peter Tork, Noel Gallagher, Matthew Bellamy, Omar Rodriguez-Lopez, Dustin Kensrue, Tame Impala, and many others.
Many manufacturers abbreviate the number and size of speakers in the name of their equipment. For example, a Fender bass combo amp with two 10" speakers may be called the "Fender 210". Similarly, a Fender cabinet with two 12" speakers may be called the "Fender 212". Another abbreviation that is used is to add the wattage to the name. Thus a 500 watt Yamaha combo amp with two 12" speakers may be called the "Yamaha 212-500".
At its core is a combination of solid spruce and maple, which gives it a subtly brighter tone when compared to conventional spruce and mahogany body acoustics. To retain as much of the guitar's acoustic body as possible, Epiphone equipped the Dove Pro with discrete Fishman electronics, with controls that are mounted on the underside of the sound hole.
When Leo and the boys at the big “F” ranch developed the Tele, they put a big slab of steel under the bridge-pickup coil. This reflected the magnetic field up and toward the strings. In the words of Seymour Duncan’s Evan Skopp, this gives it more “crack”—which, if you’re addicted to twang, is a good thing. The better news is that you can attach a plate (sometimes called an elevator plate, because of how it elevates the magnetic field toward the strings) to any single coil whose pole-piece magnets are exposed at the back.

Guitar technicians must be proficient in not only playing the guitar, but also in the construction of the instrument. They need to know how to repair and rebuild guitars from scratch as well as stringing and tuning the instruments. They need to understand how all the parts of the guitar interact to produce clear musical notes. This knowledge can be obtained through formal education, experience, working under a knowledgeable guitar tech or with other experienced musicians.
The SSL-10 had become the SSX-10 ($387), with humbucker/single/single pickups, pretty much the same. This came with jumbo frets, a satin-finished neck and a 14 degree backward pitch on the head. The rosewood ‘board now sported the “wave” or triangular wave inlays popular on Kramers, Charvels and Jacksons of the period. No mention is made of vibrato, but that doesn’t mean it didn’t have a tradition-style unit. Colors were now Carrera midnight blue, metallic black, purple burst, dark red, white pearl and blue pearl, all with chrome hardware.
With Dave Matthews playing an electric guitar in place of his usual acoustic, the band delivered a performance of “Samurai Cop (Oh Joy Begin)”, the lead single from Come Tomorrow, their record-breaking seventh-straight album to debut at #1 on the Billboard charts dating back to 1998’s Before These Crowded Streets. You can watch Dave Matthews Band’s performance on Ellen below:
If you want to invest in a guitar that replicates the famous ’70 guitars, look no further than the model offered by Fender Vintage. This product was designed to feature a basswood body that is a replica of the famous workhorse Fender guitars. Moreover, the device has a “C” shape neck that was constructed from maple, and that is said to be quite resistant.
Although this multi-effects pedal is powerful and full of features, it doesn't mean that you’ll have to face those awkward manual reading moments. The ME-70 is like a simple stomp box, each effect section has knob-based controls which makes it easy to dial tones. Similarly, whenever you need to add any effect; just kick press on one of the four foot-switches to fire up the game.
The Axe-Fx II is also the world’s most powerful hardware multi-effects. To use it with an amp, just create presets with no AMP or CAB blocks. Some people run separate chains of effects —some before the amp and others in its loop. This is called the “four cable method.” Or better still: match the sound of your amp and send THAT to front of house while you use your amp on stage in all its glory.
Guitar effects pedals can range from just £30 each for cheap, Chinese-made copies to over £200 for boutique hand-made pedals with unique sounds. For the average good-quality pedal (made by a company such as BOSS, for example), you’ll be looking at around £50-£100. This might seem like a lot for one effect, but if you’re careful that one pedal could last years.
The relationship between power output in watts and perceived volume is not immediately obvious. The human ear perceives a 5-watt amplifier as half as loud as a 50-watt amplifier (a tenfold increase in power), and a half-watt amplifier is a quarter as loud as a 50-watt amp. Doubling the output power of an amplifier results in a "just noticeable" increase in volume, so a 100-watt amplifier is only just noticeably louder than a 50-watt amplifier. Such generalizations are also subject to the human ear's tendency to behave as a natural compressor at high volumes.
Dissatisfaction with vintage units of this type usually centers around their limited gain, and their inability to sound truly fierce with Drive cranked up to full. The more exemplary users of this type of pedal, however—such as Stevie Ray Vaughan or Eric Johnson, who were both masters of early Tube Screamers—usually kept the Drive control in the lower part of its range, where the sound remains more natural and, yet again, serves as an excellent pre-boost to drive a good tube amp into distortion when the Level control is set high enough. Some players also find older pedals built to this design to have a distinct midrange hump, a slightly wooly tonality, and/or a lack of low end (as ever, depending upon the ears of the player you talk to). Consequently, a lot of newer makers have accounted for these in their redesigns. Visual Sound’s Route 66 pedal has a Bass Boost switch, Ibanez’s own recent-era TS9DX Turbo Tube Screamer has a Mode control that takes you from classic sounds to settings with more distortion and more low end, and plenty of other makers address both in their variations on the circuit.
There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.
Most guitars will benefit from an annual setup, and instruments that are kept in less than ideal climate conditions (or that are on the road a lot) may need two per year. I’ll evaluate your guitar and make a recommendation. Setups may include truss rod lubrication and adjustment, saddle lowering to adjust action, nut slot adjustments, cleaning of grimy frets and fretboard, lubricating and tightening of tuners, and checking electronics and batteries. Price is based on what your guitar needs. The price range is for labor and does not include parts costs such as strings and bone nut and saddle blanks.
Central to Fender success aside from the guitars that carried the brand all this years are the amps they make which are pioneering themselves in giving guitar players unique set of tones and unmatched overall sound quality. This is what we can say are the indicative sign and facts on why players should get their hands on a Fender Super Champ X2 for a beginner amp.
How about comparing the guitars only by the sound alone. Especially when overdriven playing in the realms rock and plug on the same amplifier or using the same set-up. Arguably there are many guitarist would find less expensive guitars are not bad at all. That they are also very much capable of producing the needed dirty tones and also able to produce a decent smooth clean sound to let players go out there and play.
Basically, Power Soaks are in-line devices that attenuate the signal from a full-out, saturated tube amplifier, preserving the tone and sustain while vastly reducing the bone-crushing volume. That signal flows from the attenuator to a speaker cabinet, which is then miked, reproducing the sound at a very manageable volume level. A Power Soak is like a second master volume control, absorbing the full power of the amp and converting that power into heat (these units get very hot!) while passing only a small portion of that power to the speaker. While there is an inherent loss of the natural non-linear speaker distortion associated with screaming guitar amps, and the pleasing sizzle and cabinet "thump" that results, the trade-off is obvious.
Sooner or later you may want to experiment further: What happens if I use a different opamp here, or change a capacitor value there? Specifying your own components is the next step. Two of the specialty jobs in building a typical effects pedal are the design of the circuit itself, and the production of the printed circuit board (PCB) on which to install the components. The next logical step from a kit is to order a pre-built PCB and then customize the component and enclosure choices yourself. AMZ effects, is the go-to place for a huge variety of pre-designed PCB’s. The cost is quite low and the projects include clear documentation providing guidance on different options and components.
If you are a first time builder or an experienced professional you know the value of building your instrument on a solid foundation. The Custom Shop Jag body is beautiful, high quality and made to spec. The Allparts neck is manufactured under license by Fender. The materials and quality level meet the standards set by Fender. Using these high quality materials will give you the sweet tone and sustain you are looking for.
Nice-Keys-Extreme-2.0  Still a big SoundFont set at 1gb or 1000mb (645mb dedicated to 3 pianos with 6 velocity layers). Similar to the top set but the main piano is a little less detailed so it leaves room for an extra piano (Steinways).  PC users should not have any problems or if running on iOS this set runs perfectly well on iPhone 6s or iPad Air 2. It is still possible to load this set within the bs-16i app and run Sweet Midi Player app using GM set one at the same time for midi backing if required. This set has everything described below plus the addition of guitars.
Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Wood: Maple & Walnut - Fingerboard: Maple - Frets: Jumbo - Inlay: Black - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line, Reverse - Bridge: Lo-Pro Edge - Hardware: 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: DiMarzio - Pickup Configuration: H-S-H - String Instrument Finish: White
I'm seeking a guitar to elicit the rich fat heavy sound. So as I understand a guitar with the H humbucker (double coil) pickup is what I need for that. But there is a wide range of layouts for the guitars. Some of them have S single (single coil) pickup, for example H-S-H layout. Where single coil pickup is mostly used for blues, funk and jazz guitars. And these H-S-H guitars are also recommended for heavy rock (because of the humbuckers).
The Alvarez AG75CE is on the upper range of $500 acoustic guitars. This particular model is a cedar top with rosewood back and sides. It also features scalloped and forward shifted bracing which makes for a bigger sound. Owners of this guitar are posting rave reviews citing it’s quality of build and great tone. The cutaway is a nice feature for those that want to reach the upper register of the guitar, and it looks cool too! It is a grand auditorium body, which does not quite have the bass of a dreadnought but offers a more balanced sound. Great for singing along. This guitar is a great choice for intermediate players looking to not break the bank.Check it out here.

Alibaba.com offers 169 korean electric guitars products. About 86% of these are guitar, 5% are guitar parts & accessories, and 4% are other musical instruments & accessories. A wide variety of korean electric guitars options are available to you, such as paid samples, free samples. There are 169 korean electric guitars suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of korean electric guitars respectively. Korean electric guitars products are most popular in North America, South America, and Eastern Europe. You can ensure product safety by selecting from certified suppliers, including 6 with ISO9001, 4 with FSC, and 1 with GSV certification.
Chorus – This is the subtlest type of modulation effect. It does exactly what its name suggests, making it sound as though multiple instruments are all playing in unison. The effect could be compared to running a signal through two amps at once and setting one on a slight delay; in fact, that’s how many artists created chorus effects before these pedals were commonplace.
The Ace Frehley (KISS) signature model, released in 1997 and re-released in 2012, has three humbucking DiMarzio pick-ups, a cherry sunburst finish (AAAA), a color image of Frehley’s face in his Kiss make-up on the headstock, and mother-of-pearl lightning bolt inlays, and Ace’s simulated signature on the 12th fret. There was a limited edition, Gibson Custom Shop run of only 300 guitars that were built with DiMarzio PAF, Super Distortion, and Dual Sound pickups. The production run model was only built with DiMarzio Super Distortion pickups. This was one of Gibson’s best selling artist runs. These guitars are now valued at between $US4,000–12,000.[citation needed]The more recent 2012 “Budokan” model features mother-of-pearl block inlays (no signature at the 12th fret), a Richlite fingerboard, Grover machine heads with pearloid banjo buttons, and a grade A maple top.[44]
If you are looking for a guitar that is not only surpassing quality levels but also looks classy, Gretsch is the one you require. The company certainly makes some genuinely beautiful instruments that appeal your eyes. Although, some Gretsch guitars come with a considerable price tag, yet they certainly worth the money. Likewise, you can also find several hollow and semi-hollow body guitars at Gretsch that are quite affordable. It means every player from all levels will surely find something of their interest over here.
While it definitely looks unique with its four sharp edges and sculpted cutaways, this guitar follows conventional super strat design, starting with a basswood body that is joined to a maple neck. For its price, its quite surprising to find that this guitar features a neck through design, which is normally only found on more expensive electric guitars. The 25.5" scale neck is topped by a 24-fret rosewood fingerboard with a nut width of 1.65", providing a familiar shred friendly feel. Giving this guitar its metal friendly voice are two LH-150 Humbuckers that are hot enough for mean high gain metal tones.

Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.

Compression is somewhat of a utilitarian effect, though I suppose some players see it as a key part of their sound. Essentially, compression is used to even out your sound. In recording situations this means helping instruments blend together by smoothing out the peaks and valleys inherent in the overall frequency spectrum. Louder sounds, like the crack of snare drum or a shout from a vocalist, become smoother, softer and woven into the overall mix.
EQ or equalization effects work by boosting or cutting specified frequency bands within the sound signal. From treble or high-end sounds such as the sizzling sounds of a riveted cymbal to low-end sources such as the thump of a bass drum or bass guitar, EQ effects don't change the pitch but rather alter the timbre or quality of the sound. Depending on the application, EQ control can be quite precise or very simple.
I Have a '70 lyle hummingbird and its a solid spruce top and mohagony neck back and sides. My guitar luthier fully inspected it. Mine is in near mint condition and sounds identical to the '64 Gibson Hummingbird my luthier has. He was trully freaked out by this.. ha ha He keeps trying to buy it from me but im affraid im hanging on to mine. It seems there is alot of contradictory information on these guitars. It is super hard to get more than a small paragraph of info on these things. One site out there has several catalogs from lyle guitars but they require a payment or paid membership to view them. If you are interested google lyle guitar catalogs. There is one that sold for 600.00 at joes vintage guitars.com Its Identical to mine. If I find any more info Ill post as discovered.
YP - The Real Yellow PagesSM - helps you find the right local businesses to meet your specific needs. Search results are sorted by a combination of factors to give you a set of choices in response to your search criteria. These factors are similar to those you might use to determine which business to select from a local Yellow Pages directory, including proximity to where you are searching, expertise in the specific services or products you need, and comprehensive business information to help evaluate a business's suitability for you. “Preferred” listings, or those with featured website buttons, indicate YP advertisers who directly provide information about their businesses to help consumers make more informed buying decisions. YP advertisers receive higher placement in the default ordering of search results and may appear in sponsored listings on the top, side, or bottom of the search results page.
Ovation backed off from its more exotic design directions and in ’77 introduced two more conservative models, the Preacher and the Viper, and its first solidbody basses, the Magnum I and II. The Preacher featured two equal cutaways, whereas the Viper sported more of a Les-Paul-style single cutaway, though neither would never be confused with a Gibson equivalent. Their shape was, in fact, essentially a downsized version of the Ovation acoustic outline. The Magnum shape was derived from the earlier Breadwinner and Deacon, with more contouring.
In the first part of this two-part article, we look at the original five-way switch and find it lacking for some uses. The 2-pole super-switch steps in to help, and we look at how we would go about wiring a Strat in the standard way using that switch. Once we’ve understood that, we go on to create an interesting alternate wiring scheme for a Strat that wouldn’t be possible with the standard 5-way.
Although the electric bass was invented in the 1930s by Paul Tutmarc, his new instrument did not sell well. It was not until Leo Fender developed the Fender Precision electric bass in 1950 that this new instrument took off in the marketplace. Unlike the upright bass, a solid-body electric bass does not produce acoustic sound from a hollow body; while an upright bass player often benefits from using a bass amp, a bass amp is a necessity for an electric bass player.
Loaded with a strong basswood body, this fella is the closest you can get to that booming mahogany tone of high-end instrument. The iconic combination of three single-coil pickups is of course there, and so is the three-way pickup selector. The sound is very resonant and articulate, making the guitar very well suited for the realms of classic rock, blues, jazz, and country. Metal is also within its reach, and so is light pop on the clear side.
Repair body wings. These wings form the main body shape and may have been broken by dropping the guitar or other damaging methods. If you do not properly glue in the wings you will need to use extra caution as to not break the bond. Repairing wings or any body wood is rarely necessary, especially on a thick guitar body such as a Les Paul Standard. It may be needed on a smaller bodied guitar much like a Les Paul Junior.
POWER – amps are created for amplifying the sound (duh) in the first place. Of course, nowadays amps are these versatile things that can do pretty much anything but cook you a scrambled egg (maybe SOON?). But power is expensive. This might sound like some deep statement I make as I look into the sunset but what I mean is wattage is not a cheap thing to come by. That is why most inexpensive models or practice models (which are often the same) do not have a lot of wattages. While this might be disheartening, trust me, as a beginner you won’t need a lot of watts. I mean unless you are a prodigy you will be spending a lot of time practicing on your own whether it be in your room, basement or wherever. You won’t be needing the wattage that much unless you are playing with other instruments or on stage. AND if you are going on stage, then you should be great enough not to need a practice amp, in the first place.
If you’re using temporal effects such as delay and reverb, these generally work best at the end of the chain. Putting a delay at the end allows the effect to give a more natural echo to everything that comes before it; the echo itself will not be altered by other effects. The same applies for reverb. Most guitarists leave reverb as the very last effect, occasionally using the amp’s in-built reverb over a pedal. Amps that have onboard reverb usually use a spring unit which produces a shimmery twang that works well for many types of music. However, if you’re looking for a roomier type of reverb that emulates a giant concert hall, a pedal based reverb is probably what you’re looking for. Either way, putting reverb at the end of the chain provides a spacious, natural tone that simulates a cavernous echo.
Yes, I see your point, quite. This article was not aimed at experienced Strat stranglers, but more at their parents or relatives, who may have wished to give them a pedal as a holiday gift but didn't know what to purchase or what the effects might be. We thought a simple guide might be helpful for the completely uninformed. Obviously, we're not an established guitar journal, so thank you very much for your helpful and constructive critique.

Taylor T5. Even the friend who bought it doesn't play it and it goes for around $2300. I was always looking for an acoustic that plays like an electric, so the T5 seemed optimal. It didn't play very well and I thought it sounded awful. Since it's got the Taylor bridge pickup in it, it sounds like a tinny can with a string until you EQ the fuck out of it. But for that kind of money, it should play and sound awesome (in my opinion), or come with indoor plumbing.
Power-valve distortion can also be produced in a dedicated rackmount valve power amp. A modular rackmount setup often involves a rackmount preamp, a rackmount valve power amp, and a rackmount dummy load to attenuate the output to desired volume levels. Some effects pedals internally produce power-valve distortion, including an optional dummy load for use as a power-valve distortion pedal. Such effects units can use a preamp valve such as the 12AX7 in a power-valve circuit configuration (as in the Stephenson's Stage Hog), or use a conventional power valve, such as the EL84 (as in the H&K Crunch Master compact tabletop unit). However, because these are usually placed before the pre-amplifier in the signal chain, they contribute to the overall tone in a different way. Power amplifier distortion may damage speakers.
it is four solders on a guitar on say a les paul needs electricty so two wires pass the electricity through the other two wires are for your pickups the pickups electricity goes through the wires of them , into a potentiometer which is the technical name for the thing under the knob (or two depending on the guitars wiring) .... than into the 3 way and than finally passes out of the guitar and into an amp , pedal or tuner
Until his death in August 2009, Les Paul himself played his personal Les Paul Guitar onstage, weekly, in New York City. Paul preferred his 1971 Gibson “Recording” model guitar, with different electronics and a one-piece mahogany body, and which, as an inveterate tinkerer and bona fide inventor, he had modified heavily to his liking over the years. A Bigsby-style vibrato was of late the most visible change although his guitars were formerly fitted with his “Les Paulverizer” effects.

Taylor does produce a more budget friendly line of instruments with the 200 series, which is ideal for beginners looking to capture their famous sound at a fraction of the price. Taylor also produces small bodied guitars such as the Baby, Big Baby and GS Mini, which rival their full bodied instruments at a lessened price and are perfect for kids and beginners to learn on (6).
The 6260 will keep the high-gain crowd happy. The V22 will satisfy anyone looking for a tube combo for rock, blues or country music. The 1960 will meet the needs of players looking for a British-type overdrive, and the 333 will nail those scooped out metal tones you might be looking for. Bugera is definitely worth checking out for players on a budget, or guitarists just looking to build their collection of classic sounds.
Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.
Our basic no frills guitar Denny designed to go head to head with $1000+ guitars. Magazine reviews and customer testimonials say it actually outperforms many well known $1500 models. If you want the look, feel and sound of a high dollar acoustic with 50% easier playability this is the best guitar we offer. Shipped wholesale direct from our workshop in Lincoln, Nebraska. 100% money back guarantee, lifetime warranty.
Reverb is still the most commonly installed effect in amps, but there are some amplifiers that go overboard, to the point that they outdo even multi-effects units. Unfortunately, even those with the most number of effects allow for limited simultaneous use, so no, you can't put 10 virtual pedals together in your practice amp. Also don't expect the quality of built-in effects to match that of boutique pedals, but they can be a great addition to an amp if used sparingly and for appropriate songs.
You can simulate any sound of three pickup guitar with two pickup guitar and vice versa, the only problem is getting it with proper wiring or customizing it. Even they will not sound the same may be close enough for your application or even better. And don't forget about potentiometers problem. The 250K potentiometer will cut some frequencies from humbuckers while 500K make singles brighter than they are by default. It may be not a problem or critical to choosing favorite tone :D
Bonnie Raitt: features an alder body, a narrow C-shape maple neck with a late 1960s large headstock, rosewood fretboard, 9.5″ radius and 22 medium jumbo frets. Other refinements included a 3-ply white shell pickguard, three Texas Special single-coils with 5-way switching and American Vintage hardware. Available in 3-color sunburst and desert sunset. Discontinued in 2000.
Looking at my beautiful but dusty Les Paul sitting in the corner, I walked over to my bookshelf to choose a book to once again work on my electric. Now, I will say that I am NOT shy about purchasing a book or many, many books if I want to learn something so there was quite a selection to choose from. I had a few books that focused on the electric guitar but for the most part they were incomprehensible or started you off with basic chords and strumming, then turn the page and WHAM! it was Eddie Van Halen time. Just no real steady work up in skills and a lot of confusing jargon. Which is probably why I set the electric aside.
Of course, any item is only worth what a willing buyer will pay to a willing seller. iGuide?is "just a guide." Please be aware that PRICES VARY WIDELY from region to region. Current estimated values are the result of much research. And we invite anyone to help add and update data. Read the "What's A Wiki" section below for more info on how to help.
Mentioned below are some of the tabs for guitar, that a beginner could practice. Take the guitar and let us first learn the 4 x 4 rhythm. Strum the guitar with a plectrum in downward and upward direction in the form of - four beats in each measure and the quarter note gets one beat. That is, strum the guitar strings (chord) 'Up-Down' 4 times a then just end it coming up after the 4th downward strum. Yes! You got it right. 'Up-Down' is 1 note (that needs to be played 4 times) and 'Up' is the half note (that needs to be played once). Practice this rhythm till you get your hands on it and then practice it, changing the guitar chords.
In late 2013, it was announced that Absara Audio of Port Jefferson Station, New York, had purchased the rights to the Supro trademark from noted electronic engineer Bruce Zinky.[7] Zinky himself had used the Supro name for a series of amps beginning in 2005 from his company, Zinky Electronics. Absara announced in January 2014 that a series of new Supro amps would debut at the Winter 2014 NAMM Show in Anaheim, California.[8] The new Supro amps are cosmetically reminiscent of their progenitors from the 1960s.
A while back I bought a GuitarPort, a product from Line6 that was one of the earliest guitar-to-PC interfaces. It cost me $99. It connects through USB and I could plug the guitar into it. I could play amp models and effects through my PC and the sound would come out of the computer speakers. (Headphones are of course an option through the PC speakers)
These guitars use very cheap materials. I bought a washburn WM24v PROE for $300 and it come with Mahogany body & neck, phenolic fretboard, emg81/85 and original floyd rose... Ibanez RG costs $400 and comes with basswood body, bolt on maple neck, rosewood fingerboard, shoddy pickups and a licensed floyd that WILL NOT stay in tune. Poor quality for money, if you get a Ibanez go for a fixed bridge/string-thru because their trems are HORRIBLE! Original floyd is the only way to go!

FU-Tone is very excited to welcome the amazing Zakk Wylde to our list of fine artists. Zakk, of course, needs no introduction and has a established career with Ozzy and his own band Black Label Society. Here are some photos of Zakk with Adam at a recent show with the FU equipped Dean Dimebag Razorback Vertigo guitar! Check out some of the new photos with Michael Wilton from the current Queensryche Tour with his ESP Signature model guitar featuring FU-Tone Big Block and other upgrades. Check out Nuno Bettencourt on the cover of Young Guitar Magazine with his Washbun N4 Equipped with FU Titanium saddles, 42mm Brass L Block, and EVH Dtuna! Also, FU-Tone is really excited to introduce some really cool new bridge parts and accessories for Telecaster Guitars from Vibramate and Bigsby! Enjoy!
Hi Chris. That doesn’t ring any bells I’m afraid. If your customer wants a new scheme I wouldn’t be afraid to replace the stock switch with a standard 5-way and then you know where you are. There’s always a chance that the Vigier switch is doing something funky and it started with slightly different pickup selections so the sound might change with a new standard switch. Obviously make sure you’ve got notes and photos so you can revert back to the stock wiring! Have you tried to buzz out the Vigier switch with a multimeter to see how it works? Alternatively, have you tried touching the pickup magnets with a screwdriver to see which pickups/coils are on in each switch position, that might give you some clues?
I must confess -- I am horrible at soldering. So after messing up another wiring harness with my soldering skills, I came across ObsidianWire and purchased out of desperation. Now I wish this would have been my first choice. The wiring sounds awesome, it was a breeze to install and the included switch and input jack completed the upgrade. I would HIGHLY recommend ObsidianWire harnesses." - Ross G Vintage 50s Wiring for Les Paul
Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.

A six-string guitar has five musical-intervals between its consecutive strings. In standard tuning, the intervals are four perfect-fourths and one major-third, the comparatively irregular interval for the (G,B) pair. Consequently, standard tuning requires four chord-shapes for the major chords. There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings.[41] Of course, a beginner learns guitar by learning notes and chords,[42] and irregularities make learning the guitar difficult[43]—even more difficult than learning the formation of plural nouns in German, according to Gary Marcus.[44] Nonetheless, most beginners use standard tuning.[45]

{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: b.c. rich","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"b.c. rich","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}

The pickups on this guitar are really cool and not found on any other model that I’ve seen.  They are really loud single coils reading out at 5.58k at the bridge, and 5.90k at the neck.  The pole piece screws even have some “gold foil” surrounding them, which is really cool and not usually seen.  These pickups sound very close to vintage American p90s, and they have this loud, articulate, sparkly clean tone combined with a really grindy dirty tone.  These pups are special, seriously!  Also, those switches were standard fare through the late 60s on most Matsumoku guitars.


Having said this, if it’s for a child under 12 we normally do recommend a nylon string as it’s easier for them to press the strings down. Some children can have tougher hands than others, so if you have a rough and tumble child, they mght be able to handle steel strings earlier than usual. Check out our buying guide for Choosing a Guitar for a Child for more information.
{ "thumbImageID": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "defaultDisplayName": "Ernie Ball Music Man StingRay 5 HH 5-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pace Car Blue Maple Neck", "sku": "sku:site51312645331323", "price": "1,699.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck-1312645331323.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004-00-60x60.jpg", "imgAlt": "" } , { "name": "India Ivory Maple Fretboard", "sku": "sku:site51312645326641", "price": "1,749.00", "regularPrice": "2,049.00", "msrpPrice": "2,049.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard-1312645326641.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard/515512000007000", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard/515512000007000-00-60x60.jpg", "imgAlt": "" } ] }
Flat tops from 1945 to 1969 are considered good quality and have good sound, although they are not as collectible as the 1920's to 1944 steel string models. This is largely due to the change in bracing and materials Martin started using in 1945. Rosewood models of Brazilian rosewood are most collectible from this era. This is because Brazilian rosewood was basically unavailable since 1970 due to export problems. Because of this, these models are considered more collectible.
Fender-type switches are, obviously, found in Fender guitars but are easily available so could find their way into any guitar, most likely Strat-type guitars. Import-type switches are often found in other makes like Ibanez and on replacement pickguard assemblies. If you have a look at my HSH wiring page and scroll down you’ll see I have an import switch in my Godin SD.
Extremely long delay times form a looping pedal, which allows performers to record a phrase or passage and play along with it. This allows a solo performer to record an accompaniment or ostinato passage and then, with the looping pedal playing back this passage, perform solo improvisations over the accompaniment. The guitarist creates the loop either on the spot or it is held in storage for later use (as in playback) when needed. Some examples of loops effects are:
Dude everything your saying about Martin is basically true of Taylor. They are the two big brand names. Taylor is to acoustic guitars what Tagheur is to Swiss watches. The low end of an expensive world where thhe best stuff comes from tiny companies who don't advertise much or pay for all he shelf space at a place like guitar center. I'm not saying Taylor's aren't good-that would be ridiculous. I'm just saying your distinction between Taylor and Martin is laughable. They are both well known companies that can charge way more because of their names just like fender and Gibson can with electrics. For the same money think you get better sounding and lasting guitars from Takamine and Breedlove than Taylor and Martin just to name a few. But there are so many smaller luthiers that will make incredible stuff.
In 1933, Dobro released an electric guitar and amp package. The combo amp had "two 8″ Lansing speakers and a five-tube chassis. Dobro made a two speaker combo amp that was on the market over 12 years before Fender launched its two-speaker "Dual Professional/Super" combo amp. In 1933, Audio-Vox was founded by Paul Tutmarc, the inventor of the first electric bass (Tutmarc's instrument did not achieve market success until Leo Fender's launched the Precision Bass). In 1933, Vega sold a "pickup and amplifier set" which a musician could use with her/his existing guitar. In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson developed prototype combo amps, but these never got produced and sold. By 1935, Electro/Rickenbacher sold "more amps and electric guitars than all the amps and electrified/electric guitars made from ’[19]28 through the end of ’[19]34, combined".[1]
Frets & Necks did an AMAZING job on my RG7421. They installed my BKP Black Hawk p/u's and new tone/volume pots. Frets & Necks service was above and beyond, fast and super knowledgeable. I am very pick...y about who works on my guitars, I am beyond pleased that I chose Frets& Necks to work on my RG. I will be bringing my RG7421 back to Frets & Necks for future upgrades very soon. Be good to yourself and treat your guitar, give Frets & Necks a try. You won't be disappointed. Thank you F&N. See More
The Fender Stratocaster Squier is possibly the most recognizable shape in electric guitar history. The Fender Stratocaster design is mimicked by manufacturers all over the world. Fender produces its own line of budget “Strats” called the Squier series. If you want to start with an electric guitar, chances are you’ll buy something like this for around $130 USD.

Used as a send effect, a resonant filter can be used much more creatively than as an insert.You get very different results from your filtering depending on where you put the filter in the signal chain. To introduce some real movement into delay lines, for example, place sweeping low-pass filters before the delay. You then get the movement of the dry sound contrasting with the movement in the delay line. If both the filter sweep and the delay lines are tempo-sync'd, you can create interesting effects where the filter appears to be moving up and down at the same time.


(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1499.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodL20582, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, priceVisibility=1, listPrice=899.0, salePrice=899.0, isOnSale=false, showMSRP=true}


Some bass amps may have additional controls for onboard effects such as bass chorus or a knob for controlling a multi-effects unit (which might include a suboctave generator, chorus, reverb, fuzz bass etc.). Some 2000s-era amps may have a knob to control digital amp or speaker emulation settings (e.g., emulating the tone of a huge 8x10" speaker stack or a vintage tube amp by famous makers, such as the Ampeg SVT).
Guitarists don’t have to just look on in envy as pianists lead the holiday sing-a-longs this Christmas. Our selection of holiday Guitar Tabs include traditional classics we all love like “O Holy Night” and “Carol of the Bells” and the pop favorites that just wouldn’t be the same without a guitar, like “Jingle Bell Rock” and “Happy Xmas (War is Over)” by John Lennon. But if you just can’t get enough of those traditional Christmas classics, you can pick up our collection of ’Christmas Favorites for Guitar.’

Early proponents of the electric guitar on record include Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Eddie Durham, Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra), Tampa Red, Memphis Minnie, and Arthur Crudup. According to jazz historian James Lincoln Collier, Floyd Smith can be credited as the first person to rig up an amplified guitar. According to Collier, "Floyd's Guitar Blues" may be the first important use of the electric guitar on record.[17]
×