While Laney brand might not sound as familiar to the “uninitiated”, this brand has been producing quality amps for very good prices. The  LG12 is a combo amp with 12-watts. While 12-watts isn’t much it seems to kick in a punch when needed (and plus, you want it for practice and more practice amps don’t have a lot of wattages). Apart from that this combo offers  LG12 12 single channel with switchable drive, CD input, headphone socket (a much for practice) as well as Bass, Middle and Treble control. The tone of this amp is pretty crisp and clean. That’s partly due to the 6.5″ custom-designed speaker. The speaker is not only functional but looks pretty nice. Looks wise this model has top mounted construction, rubber feet for sturdiness and leather handle for ease of transportation. Apart from being a great practice amp, it is also great if you travel around and want a model that can take a punch or two.
Much like the FG series model we have talked about above, this guitar is made solid and has passed Yamaha's unforgiving quality control. You know precisely what you're getting and how it'll perform because each guitar in this line-up is exactly the same as the next, with no discernible variation. They went with a nice solid Sitka spruce top in combination with a rosewood back and sides. This should tell you right away that the guitar is going to be very responsive aurally.

Bass amp speaker cabinets are typically more rigidly constructed, with thicker wood and more heavy bracing than those for non-bass amplification. They usually include tuned bass reflex ports or vents cut into the cabinet, for increased efficiency at low frequencies and improved bass sound. Preamplifier sections have equalization controls that are designed for the deeper frequency range of bass instruments, which extend down to 41 Hz or below. Bass amplifiers are more likely to be designed with heat sinks and/or cooling fans than regular guitar amplifiers, due to the high power demands of bass amplification. They are also more commonly equipped with audio compression or limiter circuitry to prevent overloading the power amplifier and to protect the speakers from damage due to unintended clipping in the power amp.
The so-called modeling amps can be said to differ from both tubes and solid state ones as they employ modern processing technology to apply preloaded characteristics to the sound. This can alter the output in a variety of ways, from imitating certain classic styles to rendering something entirely new. Needless to say, they are favored by cover bands and electronic music fans, but many guitarists don’t appreciate their “artificial” sound, although they can serve as good practice amps.   

Schecter Guitar Research is a company that has really established themselves as one of the best guitar brands out there in recent years. Many of their guitars are focused on the heavy metal market, but players of any genre can find a Schecter that meets their needs. With superb craftsmanship and high-end appointments you’d expect to find on much more expensive guitars, they are also among the best values in the guitar world.
With this high availability I can immediately check back with the program if I am unsure whether I am getting it right when practicing. I can play along to the backing track while practicing and I can continue with new material if I feel that I am ready to do so. All of this is simply not possible with a local instructor on a 30 minute per week basis.

Solid-body electric guitars are the most common style on the market today. The first widely-available solid-body electric was the Fender Broadcaster, which later evolved into the Telecaster. It was super simple compared to other electrified instruments that came before it, and the basic design premise continues on in every solid-body instrument to this day.
When Electric Mud was released, it was a huge success, selling 150,000 in the first six weeks. It was also the best selling Muddy Waters record at Chess ever, entering Billboard's Top 200 Chart. It was a triumph of a record that updated his sound and put him elbow to elbow with the bands that had influenced him. The record broke down restrictions of genres with its inventiveness and ability to re-arrange songs and have them come out as something radically different. Unfortunately, narrow-minded blues purists across the board denounced it as atrocious, offensive and a big "sell out." There's a direct similarity between this and what happened to Bob Dylan a few years earlier when he decided to go electric, making his folk-purist fans angry that he was "selling out" to rock and roll. Since Muddy is primarily a blues artist, overviews of his career would be written by a number of blues historians who would automatically dismiss this record for years to come.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: harmony","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
I had an Epi G400, MIK, I found for $175 used, in a pawn. It was decent enough enough but I found the pickups (humbuckers) a bit muddy. I subsequently picked up a Valkyrie II on closeout when they changed over to the current Valkyrie shape, for $99 + shipping. It played just as good but I was able to get one with P-90's, not available on the Epi. I preferred the P-90's and sold the Epi G400. I still have the Valkyrie:
If you mean the Guitar Hero III guitar then there are two switches on the back. The one just below the neck of the guitar (It looks like a quarter of a circle.) detaches the neck so you can store the guitar AND the neck in a smaller space, and the switch towards the side of the guitar detaches the faceplate so you can put a different faceplate on, or play without a faceplate.
We gave our electro-acoustic chart a big refresh to keep it relevant for early 2018, by replacing a few older guitars with some excellent upgraded models. Guitars such as the Epiphone PR-4E and Mitchell MX400 were removed, and in came the exquisite Yamaha A Series A3M, the new PRS SE A50E, the cool Fender Sonoran SCE, and two solid budget models, the Kona K2 and Yamaha’s APX500III.
Dorado instruments are of decent quality, but are often found at slightly inflated asking prices due to the attachment of the Gretsch name. Remember, these are 1970s Japanese guitars imported in by Gretsch during their phase of Baldwin ownership! Dorados are sometimes rightly priced between $125 to $175; but many times they are tagged at prices double that. Of course, what a guitar is tagged at and what it sells at (cash talks, baby!) are always two different animals.
ESP is another Japanese guitar brand that makes this top 10 list with its many artist endorsements and actual user recommendations. Founded in 1975, it started as a builder of custom made parts for guitarists who want to personalize their existing instruments. Now ESP is known worldwide for their hot-rodded versions of popular guitar shapes, and other unique and eccentric designs, built to please modern rock and metal players.
You can divide these further into cabinets and combos. A cabinet is simply an amplifier without a head. The head is all the knobs and so on that can be tweaked to produce variations in tone and volume. Combos include the head, so they're often preferred as they're easier to port around. However, if you want a multi-speaker setup, you'll want to opt for cabinets with separate heads.
The 85/15 “S” humbuckers here—again, they’re affordable versions of the Custom’s 85/15—are transparent, ‘hi-fi,’ articulate and high-output. Lush while clean and thick when clipped, the pickups have also been coil-split to take you into glassier, single-coil territory. However, you can’t coil-split them individually to form HS or SH combinations, for instance.

Replacing switch and jack covers. These are the plastic or metal covers that hold the jack and tells you witch switch is treble or rhythm. The switch cannot be repaired and will need to be replaced, however, a metal jack plate can never break and only will need to be cleaned. A plastic plate will need to be replaced or the screw holes need to be resized, do so properly and make sure every fastener is snug including screws and nuts.
The Electro-Spanish Ken Roberts was additionally, the first instrument to feature a hand operated vibrato, as a standard appointment found on every model.[12] The vibrato device was called the "Vibrola" and was invented by Doc Kauffman.[12] [13] It is estimated that fewer than 50 Electro-Spanish Ken Roberts were constructed between 1933 and 1937; fewer than 10 are known to survive today.[7][8][9][10]
Lee Ranaldo of Sonic Youth used a Kent Polaris I solid body (with lots of duct tape on it) and several Kent 800-series guitars - a white 820 and a sunburst 821 12-string with 10 strings on it, shown at left. Since the B and high-E strings on a 12-string set are normally tuned to the same note, he left the duplicate strings off. He uses several alternate tunings with his guitars.

The Takamine brand helps prevent big brand manufacturers from setting their prices too high - by showing them that great guitars can be produced at reasonable prices. On top of their bang per buck reputation, Takamine is considered as the pioneer of installing built-in pickups into acoustics, something that is now a common configuration offered by majority of guitar builders. The Takamine P3NY showcases how impressive tonewoods and electronics can be implemented without ridiculously jacking up the price.


There were actually two bolt-neck DT-250s, both with basswood bodies and the very nice locking Powerocker vibratos. The regular model came in black or white and had a rosewood fingerboard. Well, a little boring. But the Transparent Red TRs came with a maple fingerboard stained red. Yes, that’s what we’re talking about! If you’re going to have a red guitar, you ought to have a matching red fingerboard. Hard maple, made slick with the red polyurethane.
As this effect is more pronounced with higher input signals, the harder "attack" of a note will be compressed more heavily than the lower-voltage "decay", making the latter seem louder and thereby improving sustain. Additionally, because the level of compression is affected by input volume, the player can control it via their playing intensity: playing harder results in more compression or "sag". In contrast, modern amplifiers often use high-quality, well-regulated power supplies.

An acoustic-electric guitar has an electronic pickup that’s usually built into its bridge. This pickup is used to capture the sounds produced by the top’s vibrations. This is then transmitted via an onboard preamplifier to an external acoustic guitar amplifier or PA system. But plugging-in is strictly optional. Unplugged, an acoustic-electric guitar typically sounds just like a fully-acoustic guitar.
POLISHING Once you have completed the wet sanding you wil have a pretty smooth surface that is almost a dull shine. You can either hand polish the finish or use a polising attachment to buff it out. Stew Mac has a polishing pad that attaches to you drill. Or you can get 6" foam bonnets from an auto parts store that will fit over the sanding disk attachment you may already have. It is best not to use any thing made from cotton because it will cut through the finish. Stew Mac also has polishing compounds that you will use in order working you way down to the swirl remover. It's on the expensive side so I use McGuires polish that you can get from the auto shop. If you use a buffing attachment make sure that you uae a different attachment for each grade of polish. Don't use the same pad for each one. Also remember to wait 10 minutes after buffing before you wipe off the surface. The lacquer gets hot and soft after buffing so give it time to cool. You will have to hand polish the cutaways, don't attempt to use the buffer on the edges of the guitar or cutaways because you will burn though the finish.

While Gibson are the creators of the original J2000 jumbo-sized acoustics, the company’s reasonably priced sister company Epiphone do a range of acoustics which are perfect for players looking to dip their toes in the water. The Epiphone EJ2000 is identical in dimensions and appearance to its more costly sibling, yet offers the perfect entry guitar for budding rhythm players.
Guild is an American guitar company that makes some amazing semi-hollow electric guitars such as the Starfire and the Aristocrat. These are guitars that nail the retro-rock sound and have the looks to match. Many classic Guild models have been revived through the Newark Street collection. While these guitars are cool beyond words, where Guild really shines is in the acoustic arena.

Chris Broderick (b. 1970) is the lead guitarist for Megadeth, formerly of Jag Panzer and Nevermore. His main guitar was a 7-string RG model. During the recording of Endgame, he started using 6-string Ibanez S series guitars, which are painted with artwork from various Megadeth albums. This is because Dave Mustaine didn't want Broderick to use his 7-strings in the studio. He has since switched to Jackson Guitars.
One day I want to own a Martin IN ADDITION to my Gibson.. but having tried both a lot.. the D-18, the D-28... I went with the J-45. The J-45 is special in that it has slim shoulders - you won't get an enormous boom out of it when un-amplified. But the sustain is super fine, and as accompaniment to the singer and as a tool for the songwriter, it is rock solid and it gives, gives, gives, then gives some more. Plus, it's sexy as hell - every boy might think he longs for a Martin, but every girl goes home with the guy with the Gibson.
Sweep picking provides you with a more economical way to pick one-note-per-string or combos of one-note-per-string and two-note-per-string instances up and down the string register. Not to be confused with raking, the idea here is to fret and ring out every note clearly (no cheating!). To do this, it’s of paramount importance you approach this technique slowly and be very critical of each note’s clarity. When starting to sweep pick, start with a locked wrist and don’t be afraid the experiment with varying pick widths.
The taper of a potentiometer indicates how the output to input voltage ratio will change with respect to the shaft rotation. The two taper curves below are examples of the two most common guitar pot tapers as they would be seen on a manufacturer data sheet. The rotational travel refers to turning the potentiometer shaft clockwise from 0° to 300° as in the previous visual representation drawing.
For notation and composition work, some of the common choices are Avid Sibelius 7, Makemusic Finale and PG Music Band-in-a-Box. Or, for DJ-ing and remixing, check out the Native Instruments Traktor series, Avid Torq or the software packages from Venue Magic. There truly are dozens of options available for you to take advantage of the benefits digital editing has to offer. Whether you're an independent artist mixing tracks on your own laptop or a professional sound editor working on a major TV series or indie film, the right music software is here to handle your needs.
However, in the October, 2018 issue of Premier Guitar (at least the online edition) Frank Meyers, who runs the website Drowning in Guitars, says the Kent 700s were made by a small factory called Hayashi Mokko. Frank is a true expert in vintage Japanese Guitars, so I am inclined to believe him. This is another important piece of the Kent Guitars story.
{"product":{"id":"L20582","stock":"backorderable","price":"899.00","name":"Slash Firebird Limited-Edition Electric Guitar","download":false,"sku_id":"L20582000001000","checksum":"565047124900","rep_id":"site1prodL20582","sku_rep_id":"site1skuL20582000001000"},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
Beautiful Teisco Electric Guitar refinished in sea foam green or Daphne blue color, it has a custom series parallel pickups toggle switch, nice low action, sweet sound, plenty of tonal possibilities. Buy with Confidence....... Blessings! Item will be well packed, shipped and insured to any of the 48 contiguous States, No Alaska, No Puerto Rico, No Hawaii, No International buyers.

Launch price: $999 / £899 | Body: Basswood | Neck: 5-piece maple/walnut | Scale: 25.5" | Fingerboard: Maple | Frets: 24 | Pickups: Ibanez V8 humbucker (bridge), S1 single coil (middle), V7 neck humbucker | Controls: Volume, tone, 5-way selector | Hardware: Edge locking vibrato | Left-handed: Yes | Finish: Desert Sun Yellow, Road Flare Red, Purple Neon, White
Nice ible. I JUST got a Squier Tele Custom ii (2) in the mail Friday after selling a keytar on ebay for $355. I bought it because it got great reviews for having 2 Duncan (designed, made in asia?) P90's and the price was right for a 1st guitar. the only thing i do not like is the ugly tele headstock. I bought a '68 Harmony Marquis last year for my 1st 1st guitar, not really knowing at the time how unrewarding/difficult it would be to learn on a P.O.S like that. So, even tho the pups are probably the last thing I would replace on it, it was cool to read a bit by someone else with a "less expensive" tele. Look up the Custom ii online, it has a great looking pickguard and the pup selector is up on the top horn like a les paul. Thanks for the tips!
The AF75 also has an ART-1 bridge and a VT60 tailpiece for increased resonance, improved tuning stability, greater sustain and an enhanced tone. It is also equipped with Classic Elite humbucking pickups at the neck and bridge, producing a rich and nuanced tone with just the right low-end heft. Tone shaping is an easy affair with the Sure Grip III control knobs, which are designed for non-slip, precise control.
Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.

This funky looking piece is a vintage Japanese-built Bruno MaxiTone semi-hollow guitar with a sunburst finish and two single-coil pickups with a 3-way blade pickup switch. We love the old Japanese electric guitars of the '60s where they had great looking retro cosmetics, such as this one with pearloid pickguard as well as pearloid base plates underneath the pickups. The guitar is in good playing condition, the vibrato tailpiece has been anchored with a screw in lieu of the spring, and there is a chip in the plastic mounting piece of the neck pickup. The guitar plays great and has a cool vintage Garage Rock tone to it!
Before I get started, one quick note of caution. Because you need to play 'through' Cubase in order to hear the effects, you'll need a low-latency system — which means a fast computer, and a good audio interface, with quality ASIO or Core Audio drivers. Even if an interface has a 'zero‑latency' monitoring feature, that won't do you any good, as it will simply route the input signal to the output, without going through Cubase or any of its plug‑ins, which kind of defeats the purpose… Preferably, you should also have an interface with a high‑impedance input (suitable for guitar and bass). Many modern interfaces have an 'instrument input' which will do the job, but if not, you'll need to use a guitar‑friendly preamp, compressor, or similarly 'neutral' effect to feed a line input (or use a DI box).
{"eVar4":"shop: accessories","eVar5":"shop: accessories: fretted instrument accessories and parts","pageName":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces: bridges and tailpieces for guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[mf] shop: accessories: fretted instrument accessories and parts","prop1":"[mf] shop: accessories","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"bridges & tailpieces for guitars","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces: bridges and tailpieces for guitars","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces: bridges and tailpieces for guitars","prop3":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category4"}
The V40 expands the elusive low-to-medium gain range, putting a wide spectrum of subtly shifting overdrive textures under your fingers. There are rotary controls for gain, EQ and master volume. The real fun starts with a two-position voice switch, which subtly changes the V40's character. Voice 1 is centred more on the early 60s 'blackface' tone; Voice 2 is edgier and a touch more aggressive, evoking the tweed amps of the 1950s. A small toggle switch called 'mid kick' adds a touch of extra gain in the midrange, not least to give weedy single coils a lift for solos. There's also a digital reverb with a front-panel level control and on/off switch. Then there's the standby switch, which has two 'on' positions for high power (approximately 40 watts) and low power (seven watts). This switch also works in the V40's single-ended mode, offering a choice of around 1.5 watts in the high-power position and 0.5 watts in the low-power setting. The V40's sonic palette made us sit up and take notice. By reducing the gain, all the mildly overdriven and chime effects normally squeezed into a fraction of the gain knob's travel now occupy the whole range. The V40 Duchess is a unique design - many of its competitors feature high-gain lead channels, teamed with high headroom and often uninspiring clean channels. By focusing on those often-overlooked but highly effective low-to-medium overdrive sounds, the V40 has effectively carved out its own niche, and looks set to become popular for blues, roots, jazz and country players.
The phaser is an interesting pedal that has a surprising mix of uses across genres. What a phaser does is add an out of phase version of your signal with your original signal. This gives your sound a swirling effect that has many sonic possibilities. Eddie Van Halen famously used a phaser set a a low rate to add some “movement” to his solos. In funk, phasers are fundamental in creating the bright and terse rhythm sounds.
{ "name": "Heritage Cherry Sunburst", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000003000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000003000", "displaySku": "J40301 000003000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000003000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Heritage-Cherry-Sunburst/J40301000003000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Heritage Cherry Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }
Another issue is the fact that, in this circuit, the tone pot always has a cap engaged. You could use a really tiny value for the smaller cap so there’s little perceptible cut at the minimum setting, but that can make a substantial part of the pot’s range a little too subtle. So my plan is to combine this with a Ned Steinberger-designed JackPot as the volume control. This part has an “off” setting that bypasses the tone circuit entirely for a maximum-bright sound. That way, I’d choose for the smaller cap a value that provides the minimum treble cut I’m likely to want. (I suspect I’ll wind up with something between .0022µF and .0047µF.)

Analog overdrive/distortion pedals work on similar principles to preamplifier distortion. Because most effects pedals are designed to operate from battery voltages, using vacuum tubes to generate distortion and overdrive is impractical; instead, most pedals use solid-state transistors, op-amps and diodes. Classic examples of overdrive/distortion pedals include the Boss OD series (overdrives), the Ibanez Tube Screamer (an overdrive), the Electro-Harmonix Big Muff Pi (a fuzz box) and the Pro Co RAT (a distortion). Typically, "overdrive" pedals are designed to produce sounds associated with classic rock or blues, with "distortion" pedals producing the "high gain, scooped mids" sounds associated with heavy metal; fuzz boxes are designed to emulate the distinctive sound of the earliest overdrive pedals such as the Big Muff and the Fuzz Face.[citation needed]

Although the hollow bodies of these guitars create a mellow, naturally voiced tone perfect for jazz, vintage country and other styles that require warmth and clarity, they can also snarl. For proof of the latter, check out Lennon’s performances on “Revolution” and “Cold Turkey.” Too much volume or proximity to the amplifier, however, and hollow bodies can howl with feedback unintentionally. And that’s why the semi-hollow body guitar was invented.
I'm pleased more and more people are realising this. It really is blindingly obvious when you think about it. Anyone who talks about "resonance" when talking about a solid electric guitar body is completely missing the point, and the point is to remove, as far as is possible (and that's pretty far), any influence the body has on the amplified sound. So the primary quality you're looking for in a solid electric guitar body is not resonance, but density.

One of the key features that makes this stand out is the 7-inch high-resolution touch display which allows you to move amps, effects and set up your pedal board to exactly how you want it, sculpting the chain to your exact specifications. Want to run a reverb pedal before a distortion? Well, just move it around using the touch screen! The OLED scribble-strip and assignable colour LEDs appear above the switches and allow you to keep track of where your effects are – a great idea!
We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
All of us got carried away. We had great guitars back in the ’50s and ’60s. Then we went a little crazy. All of us – players and makers alike – started adding features and making demands that drove complexity up, up and away. Silvertone guitars represent the honest character of the guitars that created the classic music that still rules today. ... more ...
Delays can also be set to many repeats that take a long time to be reiterated.  This creates a very spaced out sound that envokes large environments.   Be careful with how loud and how many repeats you get going, because older analog delays will begin to experience a feedback loop and can blow out your speaker easily.  Some players learn to control this and have an entire new effect in their arsenal.  Delays are a super powerful tool that just never seems to run out of new sounds.  You can tweak knobs for days and never get bored!
Ibanez Mikro GIO Electric Guitar in Black w/ Bag. The guitar is in good working condition does have few marks and one nick. Does not include stand just used to take pictures. Includes guitar strap and Ibanez bag. Please contact me if you have any problems with your purchased item and I would be Happy work with you to help make your Transaction a Pleasant Experience.           Please check photos carefully and use the enlarging tool. Some photos are taken with a flash and may cause the image to appear darker in some areas. Photos are an important part of the description and the condition of each item.Thanks for Looking!!           Also please verify the correct shipping address before bidding. Payment is expected within 48 hours.    
Some of the earliest electric guitars adapted hollow bodied acoustic instruments and used tungsten pickups. This type of guitar was manufactured beginning in 1931 by Electro String Instrument Corporation under the direction of Adolph Rickenbacher and George Beauchamp. Their first design was built by Harry Watson, a craftsman who worked for Electro String. This new guitar which the company called "Rickenbackers" was the first of its kind.
000-28EC[10] and 000-28ECB: Two of the five “Eric Clapton” models. Same body size as the 000-15, but with the Martin short scale (24.9″). This artist signature model is constructed with higher-quality woods (especially the more expensive 000-28ECB constructed from Brazilian Rosewood, hence the “B”), a different shape to the neck, and more ornamentation around the edge of the body.
Despite their small stature, some of the smaller amps on the market still boast features you’d expect to see on much larger models. For example, many include some degree of tone shaping and equalization. This can take the form of a single knob dedicated to presence or even a three-band EQ capable of managing bass, mid, and treble. If you know you want to route your little amp through a larger speaker, or your sound restrictions are so great that your sessions are limited to headphones, you’ll want an amp that boasts a headphone output. These are sometimes standard 3.5mm headphone jacks, though some larger models boast ¼-inch outs.

Description: Body: Mahogany - Body Size: Baritone - Neck Attachment: Bolt - Neck Wood: Canadian Hard Maple - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Custom - # of Strings: 7 - Headstock: 4+3 - Bridge: Tone Pros - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG HX-7 - Pickup Configuration: H-H - String Instrument Finish: Black

{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}


NOTE: Due to the nature of electric guitar construction, it is extremely common for these instruments to need fret work to play well. 80% or more of electrics, especially those with bolt-on necks, have high frets in the tongue area that must be addressed in order to play without excess buzzing. This includes most new electric guitars right off the shelf. Please see the section below for fret work pricing.

The K-4L (Teisco Del Rey ET-460 Super Deluxe) had four of the large, chunky, single-coil pickups with chrome sides and black center insert revealing six square poles. These were controlled by four sliding on/off switches, plus a 3-position switch for solo, rhythm and super bass sounds, as well as volume and tone. The roller bridge had a spring-loaded muffler/mute.
Nickel ES-335 diamond trapeze tailpiece. This is a short version of the standard ES-335 style tailpiece which was also used on many arched top instruments. Overall length of Tailpiece not including hinge = 3 1/8 inches. Side to Side width at bar = 3 9/32 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
While Fender specialize in the single-coil pickup, it’s Gibson who are masters of the pickup in general – and it shows when you browse the chart in our dedicated Gibson pickup article. However, you’ll quickly discover that there is no ‘one Gibson pickup’, as the brand offer a wide range including single-coils and humbuckers, medium and high outputs, and vintage and modern tones. You’ll find different pickups on all of Gibson’s famous models, including the Les Paul, Firebird, SG and Flying V. Perhaps they are best-known for their PAF-style humbuckers – an awesome vintage tone that is well-replicated in their famous Gibson ‘57 Classic Plus.
With an entire industry surviving off musicians’ insatiable desire for the ultimate guitar tone, it seems obvious that some company would have cracked the code for the greatness. After all, corporate chain restaurants can quantify that if they use X of fat, Y of salt, and Z of sweet in their latest enormo-burger, then consumers across the country will salivate. Unfortunately, it’s not that simple with music.

Epiphone features all-metal rock solid hardware on all of its instruments. The Les Paul Special VE comes standard with the legendary Locktone Tune-o-matic bridge and Stopbar tailpiece for easy set up. Tuning is fast and reliable with Epiphone Premium Covered tuners with a 14:1 ratio.The higher the ratio, the more accurate your tuning. The tuners are mounted on an Epiphone Clipped Ear headstock with Les Paul Model in gold and the Epiphone log in silver. In addition, a "2016" Edition logo is on the back of the headstock. 


I played power cords and picked blues sounds 15- 18 years ago and started back playing but decided to learn actual cords I never actually learned anything about strings back then my girlfriend at the time had three awesome guitars so I was able to read tabs and just play so what's a good set of strings for someone who can pick the blues but is a beginner in ways at learning actual cords I was told the guitar I have is four years old and never been restung
BTW, Superstition is not played on synth but clavinet, a stringed keyboard instrument with magnetic pickups that are, in this song, actually used like two guitar single coils. — I quite agree with all your arguments, however I prefer HSS on a strat-like guitar as it doesn't have the too-muddy-neck-humbucker problem. On a Les Paul or Tele, a neck humbucker is much more useful of course. – leftaroundabout Jun 24 '14 at 23:28
A hard-tail guitar bridge anchors the strings at or directly behind the bridge and is fastened securely to the top of the instrument.[20] These are common on carved-top guitars, such as the Gibson Les Paul and the Paul Reed Smith models, and on slab-body guitars, such as the Music Man Albert Lee and Fender guitars that are not equipped with a vibrato arm.
×