I’m assuming rock guitar players so i’d say Jimi Hendrix, (I don’t personally like him but just about everyone else does) a good album of his would be “Are You Experienced?” or “Electric Ladyland”. Eric Clapton’s good stuff would be his records with Cream, mainly “Wheels Of Fire”. Van Halen’s first album (Just titled” Van Halen”.) Then Led Zeppelin 1, Led Zeppelin 2, and Led Zeppelin 4. A good Rush album would be nice too, either “Moving Pictures” or “Permanent Waves”. You might not see this but you should make sure he doesn’t have any of these yet and that he’ll like them.
• Similarly, insert the Soft Clipper into the third insert slot and click on its Edit button. For settings, try putting the Input at ‑0.0, Mix at 55, 0.0, Second at 100, and Third at 57. As with the Compressor, set the output to a high level, again stopping short of distortion. These settings are intended to get you started; you may want to tweak them depending on your guitar, pickup, playing style, and so on.
G&L, owned by Leo Fender, is yet another brand producing quality guitars. (Of course, when it is owned by the same owner as that of Fender, one can expect the extent of quality of these guitars.) Many of the G&L guitars seem to relive the Fender classic designs with some improvisations in style. Thus, this brand can indeed be considered an excellent alternative to Fender. Instead, in many instances, you will find G&L outnumbering Fender.
The Fender T-Bucket 300 is a cutaway dreadnought guitar that comes with a stylish design and an incorporated pickup system for easy amplification. This instrument comes with a laminated maple top that features a Trans Cherry Burst finish. With quarter-sawn scalloped X-bracing, this guitar offers superior resonance and playability even as time goes by.

Maton earned international renown for their superb acoustic and electric guitars and basses, which have been played by scores of famous performers from The Easybeats to The Wiggles.[1] George Harrison owned one of their MS500 models, which were introduced in 1957 and famed British session guitarist Big Jim Sullivan owned and used a Maton ‘Cello’ guitar for many years during the peak of his career, playing it on recordings with Sarah Vaughan, Sammy Davis, Jr., Johnny Keating and his Big Band and Neil Finn from Crowded House.

With a growing popularity of the Les Paul guitars, hundreds of unendorsed imitations and copycat versions had appeared on the markets. However, due to the lack of U.S. legislation to address patent infringements and restrict the import sales, oversea imitations caused legal and financial problems to the Gibson Guitar Corporation. An also troublesome thing was the existence of high quality imitations of vintage Les Paul (and vintage Stratocaster) produced by oversea manufacturers.
“Rock guitarists are incredibly conservative and traditional,” says Dr. Millard. “We like to think of ourselves breaking all the bonds and we go back to the fifties when rock and roll was revolutionary. It is not revolutionary. It is very traditional, very conservative, and musicians are really stubborn to change. We have a cultural understanding that old is better than good.”
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: victoria","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"victoria","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
If you’re interested in learning how to play electric (or even acoustic) guitar, you obviously need to pick up an instrument. But that’s only the beginning of the gear you need to get to shredding. Second only to a guitar itself, you’re also going to need an amplifier – the device responsible for projecting the sounds of your chosen guitar. The problem is: for a beginner, this task is as daunting as it is expansive.

Launch price: $299 / £199 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 22 | Pickups: Alnico V bridge humbucker 2x Alnico V single coils | Controls: Volume, tone (with push-pull coil-split), 5-way selector switch | Hardware: Vintage-style vibrato with block saddle | Left-handed: Yes (Pacifica 112J) | Finish: Natural Satin, Old Violin Sunburst, Raspberry Red, Sonic Blue, Black, Silver Metallic
I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.
Gibson 2012 SG Special '70s Tribute Electric Guitar, Left-Handed (with Gig Bag)   New from$649.00In Stockor 12 payments of $54.09 FREE 2-DAY SHIPPING Gibson 2017 SG Faded Electric Guitar, Left-Handed (with Gig Bag)   New from$659.00In Stockor 12 payments of $54.92 FREE 2-DAY SHIPPING Gibson 2017 Les Paul Standard Electric Guitar, Left Handed (with Case)   New from$2,299.00In Stockor 12 payments of $191.59 Free Ground Shipping Gibson 2019 LP Junior Tribute DC Electric Guitar, Left Handed, (with Gig Bag)   New from$799.00In Stockor 12 payments of $66.59 Free Ground Shipping See All Left-Handed Electric Guitars

The godfather of all that is sought after in rack gear; behold, the Soldano SLO Rackmount Amplifier. Those of you that have heard of the SLO (Super Lead Overdrive) already know that this thing can be brutal when it comes to lead tones. Possessing one of the tightest crunch and overdrive channels known to man, the SLO Rackmount is hailed as a grail piece of gear for many guitar players. The SLO-100 offers two channels, Normal and Overdrive, each with independent Preamp gain and Master Volume controls.  A footswitch is also provided for effortless noise-free switching between the two channels.  The Normal channel has a Bright switch and a Clean / Crunch gain selector switch.  Standard features include a tube-buffered effects loop and a slave output.  Bass, Middle, Treble, and Presence controls provide the tone shaping.  From Clapton to Van Halen, from Warren DeMartini to Lou Reed – and from you to Mike Soldano himself, the SLO is simply the player’s choice.
^ Jump up to: a b Peterson (2002, pp. 36–37):Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA: The Guild of American Luthiers. Number 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011.
When looking at acoustic pianos, there are so many variations that can lead to differences in tone: upright vs. grand, hammer types, mechanical condition, the player, mic choices, and mic techniques. No matter what, though, the piano tends to be a behemoth in the mix – for better or worse – so most often you'll be looking to cut holes out for other things in your mix.

Even if he had never progressed beyond the brain-rattling riffing of "2112" and "Xanadu," Rush's guitarist would have left his mark on Metallica and other like-minded metalheads. But he went on to fill out Rush's power-trio sound with a seamless mix of lush arpeggios and rock crunch that sounded like at least two players at once. "The guitar just had to make a broader statement," he says. Alex Lifeson reserves his most daring playing for his solos – just try wrapping your head around the extra­terrestrial lunacy of "Freewill."
Distortion sound or "texture" from guitar amplifiers is further shaped or processed through the frequency response and distortion factors in the microphones (their response, placement, and multi-microphone comb filtering effects), microphone preamps, mixer channel equalization, and compression. Additionally, the basic sound produced by the guitar amplifier can be changed and shaped by adding distortion and/or equalization effect pedals before the amp's input jack, in the effects loop just before the tube power amp, or after the power tubes.
Launch price: $299 / £199 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 22 | Pickups: Alnico V bridge humbucker 2x Alnico V single coils | Controls: Volume, tone (with push-pull coil-split), 5-way selector switch | Hardware: Vintage-style vibrato with block saddle | Left-handed: Yes (Pacifica 112J) | Finish: Natural Satin, Old Violin Sunburst, Raspberry Red, Sonic Blue, Black, Silver Metallic
Launch price: $4,200 / £3,235 | Body: Mahogany with carved figured maple top | Neck: Mahogany | Scale: 24.594" | Fingerboard: Rosewood | Frets: 22 | Pickups: 58/15 LT Treble humbucker, 58/15 LT Bass humbucker | Controls: 2x volume, 2x tone (with push-pull coil-splits), 3-way selector switch | Hardware: PRS two-piece bridge, Phase III locking tuners | Left-handed: No | Finish: McCarty Sunburst, McCarty Tobacco Sunburst, Orange Tiger, Trampas Green, Violet, Antique White, Black, Black Gold Burst, Blood Orange, Champagne Gold Metallic, Charcoal Burst, Emerald, Faded Whale Blue, Fire Red Burst, Frost Green Metallic, Gold Top, Gray Black
Heat-treated Maple is used for the AZ's neck construction. Its use increases the wood's stability, durability, water resistance and tolerance of temperature changes. After extensive prototyping and trials, we concluded that 20.5mm thickness at the 1st fret to 22.5mm at the 12th fret is the optimal neck thickness for this process. The neck is sealed with an oil finish (sealer coat) which feels similar to a comfortable well-played guitar neck.
Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.
This guitar was first introduced in 2014, and has since been one of their more popular acoustics - thanks to its USA hand-crafted quality which you can own for a relatively accessible cost. The guitar is built using North American tonewoods that include solid walnut back and sides, along with a solid Sitka spruce for the top. This configuration, along with Gibson's premium build quality results in a balanced and full sounding acoustic voice, that elegantly matches the vibe of the instrument.
For 2017, they introduced (or re-introduced?) the Firebird Studio. The Studio has regular tuners with protruding keys, and it has regular humbuckers instead of minis. It is not a Firebird, it is a Les Paul with the body of a ‘bird. This lie of a guitar sells for a whopping $1300, and the real version of the guitar - which is identical in every last detail to the cheaper 2016 model I own - now retails for $1500!
There are a couple of tricks you can try. One is to get an allen key wrench that is SLIGHTLY too large and take a small file to it to taper all six sides slightly. The other trick, which I use sometimes on Stratocaster saddle height screws, is to use a suitably-sized Torx wrench. They're already tapered, and since they're six-sided-star shaped, they grip the corners really well, even if there's a bit of crud stuck in the screw.
For a long time Yamaha were regarded as one of the best producers of student guitars but their reputation didn't go far beyond that. And it's true that they make excellent guitars for beginners, I am one of the many who originally learned to play on their student nylon string C40. BTW I'm one of those guitarists who thoroughly recommend initially learning to play on a nylon string guitar.

{"id": "L21430", "skuOrProductId": "L21430", "categoryId":"site1AAG", "name":"Fullerton Standard Legacy Electric Guitar", "pageUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Fullerton-Standard-Legacy-Electric-Guitar-Graphite/L21430000001000-00-120x120.jpg", "addToCartUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"30", "inventory":"0", "brand":"G&L", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"1", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "12% in Rewards", "checksum":"581797334923", "priceVisibility": "1"}
I bought this guitar about 1 month ago. I am a small girl 5'2". I just strap this thing on and walk around the house playing. The pickup sounds freaking great hooked up to my Marshall amp. I have several other guitars including a Taylor 210ce which I also love. But this guitar is great for traveling, camp fires, and just plain old jammin. I chose this over the baby Taylor because the Martin had a full heel on the neck where's the taylor baby did not. It also sounded better when I play both the Taylor and the lx1e side by side. I thought that the Martin had a better "feel" to is as well when holding it. It is a travel guitar so it doesn't balance as well when you are standing with the guitar strap but I don't mind that at all. I love this little guy

You can set an octave to play the higher or lower notes or both at the same time. This is ideal for those who want to really thicken up their sound and are often used by heavy metal guitarists to make solos and riffs sound really cool! The Valeton OC-10 Octave pedal is a budget friendly choice and the Electro Harmonix Nano Pog is an industry standard option.


This is a gradual and repetitive change in volume, going up and down. Done slowly and subtly it can be very gentle, but turn up the controls and you get a surf-guitar like shimmer. On extreme settings the signal turns from fully on to fully off sharply and repetitively, giving a robotic sound. Controls are usually rate and depth, with a third control to affect how sharply the volume changes occur – whether they are smooth and gradual or sharp and sudden. Tremolo pedals are often equipped with tap tempo too, allowing you to match the volume changes with the tempo of the song.
OK some people will know this already but let’s just be clear about switch terminology. A switch as you see it on the bench in front of you will often be a set of switches, mechanically connected within a single assembly. Wikipedia explains. The important thing to remember is the number of ‘poles’ is the number of switches that you have ganged together off a single lever in the component and the ‘throw’ or ‘way’ part describes how those switches operate.
With two decades of experience and thousands of local customers served I found myself unemployed/downsized in 2010 asking myself what I wanted to do next. After some searching I understood that I really enjoy the interaction that takes place in the local store between the customer and the shopkeeper. I know that we can offer the same prices as the big stores and hopefully make the experience more enjoyable.

I just built this kit, which I ordered directly from Mod DIY. Its the first pedal kit that I have built, although I do have a fair amount of electronics experience. Overall, I was impressed with the kit. All the parts were included, and functioned just fine. The instructions were outstanding, particularly if you use the high-res picture of the inside of a finished model for reference. There was ONE step omitted in the direction, which was to solder a short wire between terminal 3 of the toggle switch to connection 12 on the junction rail. But that was easy to spot.
The bass guitar has a long neck (scale-length) and thick strings. The open strings of the bass guitar corresponds to the four lowest strings of the guitar and are pitched an octave lower. The standard bass has four strings though five and six string basses are available which extends the range of the instrument. Though the bass guitar is the bass instrument of the guitar family and the double-bass is the bass instrument of the orchestral string family their similar roles have drawn bass players to both instruments.
Schecter PT Electric Guitar Simple and straightforward - this is an apt description for the Schecter PT, a modern-day version of the guitar that Schecter custom-made for The Who’s Pete Townshend. The Schecter PT has a no-frills yet tasteful look with a vintage vibe. An alder and maple tonewood combination delivers a bright and even tone, and you’ll find the price too hard to resist.
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
The most famous Gibson guitar is the Les Paul, which has been a mainstay in the music world for decades. The Gibson Les Paul is a high-end, made-in-the USA instrument, and it comes in a few different variations. Like Fender, Gibson has remained fairly consistent with their styles and designs. In addition to the Les Paul, other famous Gibson electric guitars include the SG, Flying V, Explorer, ES-335, and Firebird. Their classic acoustics include the Hummingbird.
Beautiful Teisco Electric Guitar refinished in sea foam green or Daphne blue color, it has a custom series parallel pickups toggle switch, nice low action, sweet sound, plenty of tonal possibilities. Buy with Confidence....... Blessings! Item will be well packed, shipped and insured to any of the 48 contiguous States, No Alaska, No Puerto Rico, No Hawaii, No International buyers.
1960's Kay, Model K-1 "SG-Style" Electric Guitar. 1 single coil Pickup. Great, original "see-thru" Mahogany-color finish. Bound fingerboard. Laminated maple neck and laminated Mahogany body. Volume and Tone control and adjustable truss rod. With the exception of some "Battle Scars" on lower bout of body (see photos) the finish and wood in great shape. Plays and sounds great. Stop Tailpiece. Not many finish chips. Very shiny. Frets in great shape with no visible wear. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .011 when fretted at the first and the body) and cleaning and polishing. Plays and sounds great. We also installed a new set of .009 strings.  No case included.

Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-line headstock and creme binding, give it a shot of electrifying attitude. Dynamic, unique and unconventional—like today’s guitarists—the Redondo Player refuses to be bound by the past.
When I first plugged it in, it made a sound like it was "fretting out" if you put a bar at the twelfth fret position. That's a pretty good feat, given that the guitar has no frets. It turned out that someone had cranked up the pole pieces for extra gain, but had cranked them so far that the strings made contact with them when the guitar was played. A quick tweak right in the store with a jeweler's screwdriver sorted them out and revealed the lovely vintage sound of this little beastie. Supro developed a neat strings-through pickup system with staggered pole pieces that this guitar features.

All mass-market brands offer at least one distortion pedal—and often many. Boss, for one, tries to cater to all possible tastes. Its DS-1 (not to be confused with the SD-1 overdrive mentioned above) is one of the workhorses of the breed, with some big-name players happy to stomp on its rectangular switch, including both Steve Vai and Joe Satriani. The DS-2 takes things a step further, while the MT-2 Metal Zone and MD-2 Mega Distortion get successively more evil. And Boss isn’t the only one, with DOD, Ibanez, Marshall and many, many others playing the game too, along with a few of the boutique makers. The proliferation is most distinctive in many “metal” pedals that go beyond even the standard distortion sounds. These generally offer the archetypal scooped-mid sound with thudding lows and crispy highs. Many are adjustable for anything from classic rock to metal sounds, with a tone control that acts more to reduce or accentuate mids rather than the usual high boost/cut, and often a “resonance” control or similar to adjust the fullness of the bass.

Just plug your guitar into the sound card input, start Guitar FX BOX and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice and other inputs. This sound processing program is acting just like a good collection of guitar effects pedals. You can use several of them at the same time, even all if you need so.
The Fender Hot Rod Pro Junior III is a good example of what the older style beginner amps used to entail. The initial price tag is much higher than the typical beginner amps popular today, but it is also a better made, better sounding tube amp. The Hot Rod Pro Junior III can be cheaper in the long run for guitarists that want to eventually do professional work. Most beginner amps are not powerful enough or sound good enough to quite cut it as a professional amp. The Hot Rod Pro Junior III is a simple amp that provides the bare essentials to get a professional level sound. Going the Hot Rod Pro Junior III route is a bit less conventional for beginners, but it is a solid option to consider if plans of recording or playing live lay in the future.

The Japanese guitar industry in the '60s and '70s followed an interesting trajectory. At first, Japanese factories were tasked with building cheap emulations of American designs. As time went on, their output grew more unique and bizarre due to a particular Japanese artistic flair combined with an impulse to out-do mainstream American guitars they were emulating. This resulted in wild models from the likes of Teisco which featured exaggerated body angles and totally unique finishes and pickup configurations. Moving into the mid-'70s, the craftsmanship found at Japanese factories like the Fujigen plant rivaled that found in the US. This ushered in the controversial "lawsuit era" where Japanese brands like Ibanez built extremely close replicas of Fender, Gibson and other guitar brands.
Very useful. Today I gave life to a Strat, adding a SD lil´59 in the neck, a noiseless single coil in the middle and a SD hot rails in the bridge. I used a H-S-H diagram from SD website with one volume and one tone pots (500k Alpha pots). I will add a second tone pot later on with a push/pull pot to split the little humbuckers in single coils. The guitar sounds huge now!

Description: Guitar Type: Acoustic Bass - Body Size: Grand Concert - Top Wood: Solid Sitka Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Nut Width: 43mm - Fingerboard: Rosewood - Binding: Tortoise - Frets: 22 - # of Strings: 4 - Scale Length: 32" (81cm) - Headstock: 2+2 - Bridge Construction: Rosewood - Cutaway: Single - Pickups: Fishman Sonicore - EQ/Preamp: Ibanez AEQ-SP2 - String Instrument Finish: High Gloss Natural
Hand built with the same precision as our larger guitars, just 25% smaller.  Great for travel, ideal for children struggling to get their arms around full size guitars, fantastic second guitar for the office.  Because it has a smaller box design our Travel will have a smaller sound (like any smaller guitar) but our Travel Electric with built in auto tuner allows you to plug into any amplifier or PA system giving you the same power as our full size guitars.
mid-1939 Popscicle bracing on D body sizes. See the above picture for what the popsicle or T-6 or upper transverse graft brace is. The popsicle brace was added to the underside of the top of the guitar, below the fingerboard. The brace was added to help prevent top cracks alongside the fingerboard. Since the first D body size was made in about 1934, problems obviously came about and Martin added the brace by 1939. The brace does not appear in pre-1939 Martin D-sizes, but transitioned in around 1939, and is present in all 1940 and later D models. Without the popsicle brace, the top is attached only by the strength of the spruce fibers and a 1/2" x 2" glue area where the top overlays the soundhole #1 brace. With the popsicle brace there is an additional 1" x 2" glue surface directly under the fingerboard. Unfortunately the popsicle brace can deaden the sound of the upper bout area of the soundboard, and the popsicle brace doesn't always prevent the top from cracking along the fingerboard either. As people search for why the old Martins sound so good, they examine every aspect of them and the popsicle brace usually enters the conversation. Here's some data on popsicle braces:
The Effect: Even though acoustic electric guitars are generally not associated with various guitar effects, using some can be very beneficial to your tone. Naturally, the types of effects you are going to use will differ from those used with electric guitars quite a bit. The most common accessory in an average acoustic electric signal chain is a preamp pedal. Something like LR Baggs Venue DI is a perfect example. This preamp allows you to boost the signal being fed into the amp or PA, but more importantly, shape it in a way that enhances your tone. Aside from preamps, many guitar players like to use various modulation effects, delays, reverbs and similar. General consensus is that overdrives and distortions are not something you would want to hook up to your signal chain. If you are frequently performing on stage, having even a simple effects chain can be a real game changer.

It has been stated repeatedly that the CEO is a challenge, toxic whatever and yes, all of it is true. Many if not most people who take a management position here don't last a year. This is especially true at Corporate where at any given time half of the positions are open because employee turnover is off the charts and they are horrible at recruiting talent to get replacements hired. That's a really bad combination to have in a company. So the first question you have to ask yourself is: do you want to show a job that only lasted six to twelve months on your resume with a company that has a positive, almost cult like global brand image? Or another way, how will you explain your short tenure to the next company you interview with and make them believe you weren't the problem? When I was outside Nashville and told people I worked for Gibson 100% of them said "that's a great company" even though they had no clue. It's highly likely your next potential employer will think that way as well.
The Epiphone Thunderbird IV Reverse Bass is Epiphone’s most distinctive bass guitar to date. The Thunderbird features the classic reverse body styling and dual humbuckers just like the Gibson originals! The Thunderbird IV features an alder body and a 34 inch scale bolt-on maple neck with a rosewood fretboard and dot inlays, and warm and phat dual humbucking pickups.
© 2013 Ubisoft Entertainment. All Rights Reserved. Rocksmith logo, Ubi.com, Ubisoft, and the Ubisoft logo are trademarks of Ubisoft Entertainment in the US and/or other countries. The “PS” Family logo and “PS3” are registered trademarks and the PlayStation Network logo is a trademark of Sony Computer Entertainment Inc. Software platform logo (TM and ©) EMA 2006.
The Hi-Flier guitar, which was possibly built in the Matsumoku factory, underwent multiple phases during the course of its production. Each of the Hi-Flier’s four manufacturing phases came with a variety of feature changes, ranging from simply switching the color of the pickguard to actually fitting the guitar for humbuckers rather than the P90-style pickups it originally came with.
Japanese classical guitarist Shiro Arai founded the Arai Co. in the 1950s as an international importing company, which expanded to manufacturing in the 1960s adopting the "Aria" brand name. The explosion in popularity of the electric guitar in the 1960s led them to begin manufacturing and distributing several different brands, Lyle being one of them. Arai attended the NAMM trade show and saw many of the American guitar designs that had attained popularity in the U.S. This greatly influenced Arai to produce similar models.
I just want to say I completely agree with the assesment of getting a non-shit Fender strat vs a Squire to begin with. I was on one of these cheapos and a 15w marshall amp for way too long. I became decent at playing, but in the end I didn’t feel inspired to keep playing. I recently bought a Maton MS503 Classic and a Fender Blues Deville 410 and playing that setup was like my body was on fucking fire. I wish I’d had more of that feeling sooner in my life. Those $200 for a squire goes a couple of years, but a $600 strat or other great guitar can go a lifetime. Amp matters heaps too of course.
Martin’s second major innovation, and arguably the more important, of the period 1915-1930 was the dreadnought guitar.[6] Originally devised in 1916 as a collaboration between Martin and a prominent retailer, the Oliver Ditson Co., the dreadnought body style was larger and deeper than most guitars. In 1906, the Royal Navy launched a battleship that was considerably larger than any before it. From the idea that a ship that big had nothing to fear (nought to dread), it was christened HMS Dreadnought. Martin borrowed this name for their new, large guitar. The greater volume and louder bass produced by this expansion in size was intended to make the guitar more useful as anaccompaniment instrument for singers working with the limited sound equipment of the day. Initial models produced for Ditson were fan-braced, and the instruments were poorly received[citation needed].
This package features an iconic electric guitar—The Les Paul— paired with a great little practice amplifier, the Electar-10, and quality accessories. The Epiphone Les Paul Special II is a versatile guitar that feels comfortable covering most any major style, including rock, blues, punk, classic rock and more. The guitar features a dual humbucker pickup configuration. The package also includes a tuner (very important), guitar picks and free online lessons to get you playing right away. A cable, strap and gig bag complete the package.
You can simulate any sound of three pickup guitar with two pickup guitar and vice versa, the only problem is getting it with proper wiring or customizing it. Even they will not sound the same may be close enough for your application or even better. And don't forget about potentiometers problem. The 250K potentiometer will cut some frequencies from humbuckers while 500K make singles brighter than they are by default. It may be not a problem or critical to choosing favorite tone :D
If you are familiar with - a special kind of - programming, you can use something like Pure Data or Max MSP. Pure Data (PD), for example, is an open source, visual programming environment for manipulating streams of data like audio (or video). With PD you are able to build your own individual FX chains or use community contributed patches (In PD speech "programs" are called patches). But I think it's not as trivial to use as out of the box products.

I had just finished signing up for guitar.com. I am a 54-year-old disabled Miner of 22 years, so I thought I would try to take up playing the guitar once again like I did when I was a kid. I forgot a lot about it through the years as life moved on, but now all I have is time. I came across your website and thought why not give it a try. so anything you suggest I will try once twice if I like it lol


You have to take into account that these are low budget guitars, so there will be compromises in terms of materials, pickups and hardware. The experienced guitar player might require a higher standard. That being said, if you have between a 100 and 300 dollars to spend and you do want to learn to play guitar than these guitars are really worth the investment.


While there are cheaper Strats under the Squier sub brand, the Standard Stratocaster is the way to go if you want a budget friendly one with with the Fender logo. This guitar is fondly called an MIM (Made in Mexico) Strat to differentiate it from the American made version. While some elitists will tell you that the difference is noticeable, many others attest that it's hard to spot the difference in an actual blind test - making this a true to form Standard Stratocaster, only this one is not made in the USA.
SCALE LENGTH What is a "Scale Lenght?" The scale lenght is the lenght the string travels between the nut at the top of the fretboard and the bridge at the mid section of the base of the guitar. To determine the scale length of your guitar you would measure from the front part of the nut where it meets the fretboard to the center of the 12th fret on the neck and multiplying that by 2. Add about 3/16" to that on the low e string and taper that to about 1/16" added to the high e string. This is called compensation and that is why you see that tapered line on a bridge. Go to Stewart MacDonnaldfor more info. They also have a Fret Calculator that helps you determine your particular scale length in addition to a page dedicated to helping you out with tons of free info for your guitar building projects.The fret is the metal of nickle wire that is raised up off the fretboard. I would suggest buying a neck that has been pre made from a manufacturer that fits the design concept that you want to go with. I bought mine from Guitar Parts USA for about $70. You can pay anywhere from $50 to $300 for a neck at online retailers, but surf around and make sure you are satisfied with what you get. Guitarpartsusa will tell you to buy an expensive neck if you are building an expensive guitar, not a $70 neck. But for mine the $70 neck works just fine. Once you get the neck in and you determine what the scale length is you can lay it all out on paper. I recomend buying all your hardware, pickups and knobs before you draw your final template. This will allow to place everything where you want it and know what size holes to drill for the electronics and how big the cavites will need to be for them and the pickups.

If your audio track suffers from a lot of spill, or includes chords, the pitch correction may not work correctly. Where spill is loud enough to be audible, you'll hear this being modulated in pitch alongside the wanted part of the audio as it is corrected. As a rule, chords are ignored, so guitar solos, bowed stringed instruments and bass parts (including fretless) can be processed, and only single notes will be corrected.
i have played fender most of my life .Fast neck and comfortable .However when my musical interest changed to southern rock i decided to buy a gibson . The mahogony body sounds different as does the string thru design of my firebird .Now i play both .Out of the box i prefer gibson and dont need to change a thing .I see many fender players always looking for “that sound” changing pickups pots etc.and using many boxws to change the tone.All i use with my gibson is a wa wa and overdrive
no. first of all a bass guitar has 4 strings and a guitar has 6 strings second, u couldn't tune the guitar open notes a whole octave down to create the bass notes as the strings would be too loose. although you can play bass songs on a guitar but it wouldn't be as deep a bass. Actually you can. depending on the kind of way your guitar is built you can remove your guitar strings and replace them with bass strings and finally adjust the setting on your amp so you can have a rich full tone. I have a Fender Squier and made it into a bass by replacing the strings and adjusting the settings on my amp. WARNING: you NEED to know if your bridge or the place where you put the bass strings through can hold the pressure the bass string apply.
The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.
While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.
Reverb works well for acoustic guitars because it's a less intrusive effect that doesn't overtake the clean signal. Echo and delay pedals can be more difficult to tame from a feedback perspective, especially when the echoing trail gets too long. With reverb, you can have a thick effected layer with a relatively short trail behind it, especially with the HOF's short/long switch. 
Play It Loud: An Epic History of the Style, Sound, & Revolution of the Electric Guitar is just that: a swooping, all-encompassing timeline of the instrument’s early days to its beyond-essential role in pop culture and music. Written by Brad Tolinski and Alan Di Perna, with a foreword by Carlos Santana, the book dives into the electric guitar’s place in our society, tracing its evolution in sound, style, look and purpose. Here are 10 things we learned from reading:
As PA systems improved, horn-loaded "bass bins" and subwoofers were added and were often well-equipped to amplify directly-fed bass guitar and keyboard frequencies. As well, in the 1980s and 1990s, monitor systems were substantially improved, which allowed sound engineers to provide on-stage musicians with a loud, clear, and full-range reproduction of their instruments' sound.
Finally, according to Longworth, the earliest examples of these instruments had laminated bodies made of maple, rosewood and mahogany. A second series was made with a combination of maple and rosewood. A third series was made with maple and walnut. The #1034 EM-18 shown here appears to be very early yet has maple and rosewood, so it’s not clear if materials are indicators of chronology or simply the vicissitudes of fate (or the woodshop, as the case may be).
What Fender might lack in heavy, modernized features, it makes up for in affordability, novelty and being some of the best all-around guitars in existence. They would also have to be considered some of the most stylistically versatile guitars, covering all kinds of musical genres and songs. We’ll focus primarily on the Standard (non-American) models, since they’re priced below our $700 cut off. If you want to go with something nicer, target the American series Strats and Teles.
Audiffex Guitar Pedals was one of the first professional guitar software packages, with its original version released more than a decade ago. It has since been upgraded but continues its legacy of providing stompbox effects in software form. The latest version is an all in one guitar effects software package - which includes 36 plug-ins that also works for bass, vocals and other instruments. Features include consistent interface with all effects having similar controls, modular plug-in configuration for easier and flexible routing and intuitive preset management. Current retail price: $49
The Reaction Many manufacturers reacted by making warranties void if amps were driven at full power, some threatened to cut off retailers who sold their amps to bands that played ‘music of the devil’. The parody of this historical contradiction has been rewritten, to fit mythical beliefs that brilliant designers created these amps for what ‘rock musos’ wanted.
While some Supros were more or less re-branded Nationals, many represented totally unique designs in the Valco line. When the Supro equivalent to the National Grand Console was introduced in 1958, it featured a radically different body design. In place of the National’s conventional all-wood construction, the Supro 1475B Console Sixteen featured two wooden necks connected by three chromed metal rods that ran all the way through each neck. It’s not obvious why this design was chosen; it doesn’t have any advantages other than its unique aesthetics, and I don’t believe it could have made construction any cheaper. The Supro was cheaper than the National – $175 vs $235 – but the difference was likely due entirely to the more “exclusive” name on the National.

Replacing switch and jack covers. These are the plastic or metal covers that hold the jack and tells you witch switch is treble or rhythm. The switch cannot be repaired and will need to be replaced, however, a metal jack plate can never break and only will need to be cleaned. A plastic plate will need to be replaced or the screw holes need to be resized, do so properly and make sure every fastener is snug including screws and nuts.


Bought a Tubemeister 18 Twelve about three years ago. Love the size, and options of this amp. Primarily use it at home. Replaced a Fender and a Marshall combo amps with this one. Really like the sound, but recently blew a power tube as well as a fuse, and capacitor as a result. Replaced the Chinese power tubes with JJ's, when professionally repaired. All seems well, but wonder about the reliability of this amp in the long run. My tech recommended changing the tubes every year or two, especially if using the power soak feature. Running it really hard by doing so. Also, read that it generates more heat inside the cab (no vents. closed back). Overall still like the amp, but after dropping $200 to repair, after spending $800 on the amp.. having second thoughts of long term reliability. Not using the power soak very much any longer, and keeping a better eye on the TSC (tube safety control)... not sure if it actually did what it is suppose to. To me... less features and simplicity could be ...more
It also has an overwhelming amount of sheet music in it. These music sheets allow you to practice what is being taught in the given chapter, which is nice, but going through the books, I felt there was a lot left unexplained. This was probably a result of them trying to simplify things as much as possible, but this actually leaves holes in the padawan guitarist's knowledge.
My 15 year old daughter recently renewed interest in the guitar she had bought a few years ago but had never really played much. She was disappointed when she noticed the strings were loose. We brought it here and Ted was so helpful and engaging. He recommended new guitar strings; normally you can buy the strings and do it yourself, or pay them to do it. He readily understood that while my daughter didn't know how to do it herself, she would like to know. He showed both my girls how to string a guitar, talking them through each step while he expertly strung the guitar and got it in perfect tune. Ted teaches guitar and his tutorial was an excellent recommendation of his teaching skills. He also threw in a cleaning cloth and gave us chocolates - how much better does it get than that?! We will definitely be coming back!
Two types of switches are commonly used for guitar mods. One is a potentiometer with a switch—a push/pull, push/ push, or the Fender S-1—and the other is a common toggle, which is available in different sizes, shapes, and configurations. When adding a switch to a passive circuit, you don’t have to worry about voltage and power ratings—all that matters is that switch will fit your guitar!
While Line 6 is probably the best known high-volume preset modeling amp brand, Peavey isn’t far behind – and truly rivals the offerings of Line 6, both in quality and quantity. What’s especially intriguing about this particular amp is that it allows you to choose not just the amp models and a wealth of applicable effects, but that it gives you the power to choose the type of instrument you’re plugging into it – thusly shaping the rest of the options accordingly. Whether you play guitar, acoustic guitar, or bass, this amp can change it sound to suit the instrument. And that’s a lot more than other competitors’ amps have to offer. It also features a tap tempo, USB connectivity, a headphone jack, and more.
 South Korea has been one of the largest OEM guitar factories in the world since 1980's. Nonetheless, the words "Made in Korea" still invoke visions of low cost alternatives to high-end manufacturers. At Swing, our mission is to lay these stereotypes to rest, and show the world that we can produce true professional grade instruments, made by professionals, for professionals. (Of course, company is not a patriotic organization. This is a matter of manufacturer's pride and self-satisfaction that can be called "Professionalism".)
{"pageName":"[gc] pdp: washburn xmdlx solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","products":";114096449;;;;evar65=null-Guitars-Washburn","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}
Nowadays, you can find many in-between sets, but you'll want to have a solid understanding of what the gauges are in terms of actual measurement and how they affect your ability to perform with your desired tone.  These relatively open descriptions will also differ from acoustic strings to electric strings, so your experience in handling many types of guitar strings and gauges is paramount in making the right choice.
In a pinch, you can check for standard string action using a business card; it should just fit between the fret and the string at the 12th fret. Be prepared to adjust the neck at least a couple of times a year, particularly if you live in an area with large humidity swings between summer and winter. If your action is very low and you're still having difficulty playing bar chords, etc., you may want to switch to lighter gauge guitar strings. Be prepared to re-adjust the neck after you restring, because lighter strings exert less pressure on the neck, so you may now have an underbow.
Though he was influenced by everyone from B.B. King to Muddy Waters to Chuck Berry and Bob Dylan, Hendrix’s complete artistic vision included elements of blues, funk, rock, psychedelia and utter chaos. His frequent use of effects like the wah and Octavia pedal, pioneering studio effects like “backward” guitar and flanging, and use of controlled feedback and the tremolo bar added another dimension to his music.
CostHelper Electric Guitar Guide - [New Window] - Find out how much an electric guitar should cost. Get price guidelines and shopping tips for an electric guitar. A basic electric guitar with amplifier and cord starts around $200 to $400 for a beginner's outfit; a better quality kit can run $500 to $2,000, and high-end electric guitars are $2,000 to $5,000 or more for the instrument alone.
Without a doubt, dont even entertain the idea of getting one, I was given one by an unfortunate friend who bought one, to try and get it to at be semi playable.. the necks are not even straight, in fact , you could ski off them.....the frets stick out from the side of the neck, the strings are so far off the neck you cannot even fret them down.... There must be no quality control whatsoever in the factory..
What type of environment are you playing in? This is an important consideration when determining how many watts your amp should have. If you practice in an apartment surrounded by neighbors, a low wattage combo option is going to minimize potential conflicts. If you play live gigs in small club environments, it is possible to get by with as little as 50 watts. Larger venues require a larger amp that can move more air with its speaker. You should also take in to account how many other musicians you are playing with, and if there is a second guitarist, as you will want a tone cuts through the mix as opposed to getting buried.
Power-tube distortion is required for amp sounds in some genres. In a standard master-volume guitar amp, as the amp's final or master volume is increased beyond the full power of the amplifier, power tube distortion is produced. The "power soak" approach places the attenuation between the power tubes and the guitar speaker. In the re-amped or "dummy load" approach, the tube power amp drives a mostly resistive dummy load while an additional low power amp drives the guitar speaker. In the isolation box approach, the guitar amplifier is used with a guitar speaker in a separate cabinet. A soundproofed isolation cabinet, isolation box, isolation booth, or isolation room can be used.
Gibson guitar are among the best in the world, but they can also be a little expensive. You can go with an Epiphone, but Gibson always has a few good options under the $1,000 mark as well. If you love the idea of owning a Gibson Les Paul but you’re struggling with the cash part of it, check out the Les Paul Faded. A little while back I grabbed the 2016 version and it’s been a fantastic guitar with the tone and feel of a Les Paul, minus the big price tag.
Invented in 1931, the amplified electric guitar was adopted by jazz guitar players, who wanted to play single-note guitar solos in large big band ensembles. Early proponents of the electric guitar on record include Les Paul, Lonnie Johnson, Sister Rosetta Tharpe, T-Bone Walker, and Charlie Christian. During the 1950s and 1960s, the electric guitar became the most important instrument in popular music.[1] It has evolved into an instrument that is capable of a multitude of sounds and styles in genres ranging from pop and rock to country music, blues and jazz. It served as a major component in the development of electric blues, rock and roll, rock music, heavy metal music and many other genres of music.
×