What I really want is a pelham blue or mostly-bluish-but-a-little-teal gibson sg with an ebony fretboard. the fretboard is absolutely a deal breaker. i'll probably change the pickups to WRC's so stock pickups are unimportant. Could get a used Elliot Easton, but I'd have to buy it used, sight unseen, and the trem isn't really ideal for how I tend to play, so I was hoping there was someone out there who does this. I am kinda surprised that no one does. It's one of the most iconic designs in history, why no interest in BTOs?
In typical pedal effect chains you will most likely be running cable lengths that are much longer than 5.5 meters. The ME-80 allows you to keep your tone pure when running lots of effects. You can run a cable up to 5.5 metres into the input of the ME-80. The multi effects engine processes up to 8 effects in its internal signal chain. Then the ME-80 outputs your guitar signal as a 2,000 Ohm low impedance signal allowing you to run a much longer cable to the amplifier.
"Guitarists frequently ask me to recommend a gig-worthy combo that sells for less than a thousand bucks," wrote Guitar World's Chris Gill in the May 2017 issue. "The question is never quite that simple though, as players often stipulate that they need great clean tones with plenty of headroom and that work well with pedals, a solid overdrive/distortion channel that really projects on stage, and really good reverb would be nice, too. While there are a few amps on the market that meet those requirements, the new PRS Sonzera series has jumped to the top of my list of recommendations."
If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.
Categories: Gibson Guitar CorporationBanjo manufacturing companiesBass guitar manufacturing companiesGuitar amplifier manufacturersAmerican companies established in 1902Manufacturing companies established in 19021902 establishments in MichiganCompanies based in Kalamazoo, MichiganManufacturing companies based in Michigan1902 in musicCompanies that filed for Chapter 11 bankruptcy in 2018
Most of Peter, Paul and Mary’s work had splendid fingerstyle guitar work. My favorite is “Don’t Think Twice It’s Alright”. Paul Stookey also had some fine acoustic work going solo with stuff like “Sebastian” and “The Wedding Song”. “The Wedding Song” was supposedly “must learn” stuff for aspiring acoustic players in the 70’s (so they could play at their friends’ weddings).
Petros Guitars are an elite customized acoustic guitar luthier, formed by the Petros brothers, Bruce and Matt Petros, based in Kaukauna, Wisconsin. They are noted for their exceptionally high quality craftsmanship and often make guitars similar in appearance to Spanish Baroque guitars with the design, making both steel and nylon string hand-made guitars. Bruce began making guitars in 1972, and in 2000 he was joined by his brother to form the Petros company.[
Whether he was playing as a Muscle Shoals studio musician or as one of the lead guitarists in The Allman Brothers Band, Duane Allman was brilliant. Both his standard playing and slide playing were some of the smoothest and most adventurous the world has ever seen. To hear Allman at the height of his guitar playing prowess, give a listen to “The Allman Brothers Live at The Fillmore East.”
Alan Parsons: "I always use condenser mics on a guitar amp, never dynamics — they're too telephoney. That's an unfair expression for a very good dynamic mic, but by comparison to a condenser, you're not going to get the bottom end." While this stance is more hard-line than that of most engineers, condenser mics are, of course, regularly used for recording electric guitars. However, in practice they rarely seem to be used on their own and are very often lined up alongside the trusty SM57.
People that "hear a difference" are usually pre-conditioned to hear one. If you were removed from the guitars presence completely and only given anonymous samples of their tone, it's highly doubtful you'd identify, match or even come close to choosing 100% of the guitars tones correctly. Especially based on some imagined effect the wood is having on the sound.
There are some guitarists who place the compressor last, though, to boost their signal just before it hits the preamp of their amplifier. The drawback to this approach is that any hum or hiss introduced by other effects will be increased by the compressor's output gain. Sometimes you can remedy this by placing a noise gate before the compressor, however, the noise reduction can have an effect on the tone quality. A best-of-both-worlds approach might be to put your compressor first and use a signal booster just before your amplifier. Some guitarists also like the sound of putting their wah or envelope filter before the compressor to give it a wider frequency range to affect. Experimentation is always encouraged, but putting the compressor first is recommended.
Although I’ve spent most of my life focusing on audio journalism, I’ve been active as a musician since taking up guitar seriously in the 1970s, and I have played lots of gigs with jazz, rock, and folk groups in New York and Los Angeles. I now play mostly double bass and ukulele; I currently play in three jazz groups in Los Angeles, and I sub regularly in a couple more groups. I also conduct more-or-less weekly jazz jam sessions at my home, where I accompany numerous guitarists of widely varying skill levels, toting all sorts of axes. Having conducted innumerable multi-listener comparisons of audio products over some 25 years, I have a good idea of how to make product tests fair.
This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.
The smallest Taylor guitar available. The Baby Taylor series has been hailed for its easy-to-transport size and affordability. Features include sapele laminate back and sides with an optional Sitka spruce (identified as a BT1) or mahogany top (identified as a BT2). A larger bodied option is also available called the “Big Baby” (BBT introduced in 2002), which is a 15/16-size dreadnought with a neck that is standard scale (25-1/2”) and narrow width (1-11/16”). The Big Baby however only comes with a Sitka spruce top.
Kahler Tremolo bridges feature 6-way adjustable string saddles, which really allow you to dial in your string action and intonation. They have a fairly wide range-of-motion, but less than the Floyd Rose. The Kahler’s have a smoother feel compared to the Floyd Rose, and also have a convenient locking mechanism to convert the bridge into a fixed bridge.
The color black is powerful, mysterious and evokes a sense of potential and possibility. It’s widely regarded as the single most popular color for Rock ‘n’ Roll thanks to rock pioneers such as KISS and AC/DC. Get back in black with these fine offerings from Dean with our vivid take on the classic black electric guitar with a few other shades thrown in for good measure. Plug in and play. Get your wings!
I'm unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar "Splender" claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.
We have done hundreds of guitar 'set-ups' / repairs / restorations over the years and know how to do them to a degree that 95% of 'players' will be very satisfied. We're not just changing strings and polishing. We'll check and adjust the neck for correct string height at the 7th fret (should typically be about the thickness of a .010 gauge 'E' string when fretted at the first fret and the 12th fret). We also check for a 'body bump' in the neck as if that can't be addressed to a 'playable' degree, then the balance of the adjustments will be for naught. As we're in a very dry climate, we will check for 'fret overhang' due to neck shrinkage and 're-dress' the frets accordingly. If it's a 'bolt-on' neck, we'll check for neck joint / screw integrity and repair as necessary. We check and adjust for correct intonation using our 'Peterson' strobe tuner and our other 'analog' tuner. Electrics are typically intonated with 'fresh', .010 strings installed (if you want it intonated with a different gauge, just let us know). We inspect and test the electronics, especially looking for any 'aftermarket' re-wiring / mods / incorrect repairs. We inspect the integrity of the tuning machines and repair as necessary. Of course we do all the standard cleaning, adjusting and test playing once the 'basic integrity' of the instrument has been addressed.
The GK Studio mixes traditional flamenco construction techniques, a comfortable body shape and modern Fishman electronics, resulting in an easy to play nylon-string guitar that can be plugged in for stage use. My main concern about this guitar is its slightly thinner body depth, neck and nutwidth(1.96"), but these are calculated tweaks that should make this classical guitar play and feel more akin to conventional steel-string acoustics.
How to Order Custom Guitar: THIS IS A PRE-BUILD PRICING. You will receive the custom guitar exactly as pictured. Please make sure to choose the required options marked with the RED ( * ) asterisks and it will compute automatically the options you choose. We also offer Optional Upgrades but they are not required. And then once you hit on Buy Now button, go to the top most portion of the website and you can see a cart image logo and click on that then you can see VIEW CART and CHECKOUT to determine the total cost of the guitar including the shipping and the discount.
The prime advantage of Epiphone is that you get a guitar built to the same specs as the Gibson Les Paul, at a greatly discounted price. With that being said, an Epiphone is not equal to a Gibson simply because it shares the same design. The craftsmanship is where the two brands differ the most, as USA made Gibson’s utilize higher quality materials than the Epiphone line. Epiphone uses a cheaper mahogany in the construction of its guitars, while the electronic components are lower quality as well.
As obvious as it sounds, a tuner (or tuning pedal) is fundamental for your rig. It can also act as a mute switch for changing guitars between songs. These days there are many smartphone apps for tuning your guitar – as well as clip-on tuners – but when you need precision and a clear visual indication of the pitch of your strings, nothing beats a good old tuning pedal. The Boss TU-3 is a classic tuning pedal with lots of useful settings – alternatively, you can check out the CPT-20 by Harley Benton which features true bypass connections and a super large LCD display. Need a smaller footprint? Try the Mooer Baby Tuner!
Similar to five-string bass guitar tuning, seven-string tuning allows for the extra string a fourth lower than the original sixth string. This allows for the note range of B standard tuning without transposing E standard guitar chords down two and a half steps down. Baritone 7-string guitars are available which features a longer scale-length allowing it to be tuned to a lower range.
Juszkiewicz, 64, is known for being temperamental, ultracompetitive and difficult to work for. A former Gibson staffer recalls a company retreat in Las Vegas punctuated by a trip to a shooting range, where executives shot up a Fender Stratocaster. In recent years, Juszkiewicz has made two major pushes, both seemingly aimed at expanding a company when a product itself — the guitar — has shown a limited ability to grow its market.
In late 2013, it was announced that Absara Audio of Port Jefferson Station, New York, had purchased the rights to the Supro trademark from noted electronic engineer Bruce Zinky. Zinky himself had used the Supro name for a series of amps beginning in 2005 from his company, Zinky Electronics. Absara announced in January 2014 that a series of new Supro amps would debut at the Winter 2014 NAMM Show in Anaheim, California. The new Supro amps are cosmetically reminiscent of their progenitors from the 1960s.
One of the biggest hits of all-time, this song incorporates everything that is 80’s pop and is performed in the key of F# major, in 4/4 time. Lauper originally didn’t want to sing it since the original version was written by Robert Hazard, who wrote it from the perspective of a man. Eventually, the singer released her version of the song and the rest is history.
The Wildwood staff feels that they are some of the best instruments to see the light of day since the mid-60’s. We have worked closely with the Gibson Memphis factory to create unique special run guitars that take these iconic instruments to new levels while honoring the Gibson’s storied history. By producing everything from classic reissues to signature artist models, the Memphis factory is taking their game to a whole new level. We are proud to present our Gibson Memphis inventory, and we invite you to look around and fall in love with one of these superlative instruments.
There are several factors to consider when establishing a good guitar tone. Here are some guitar tone tips. Lets start with electric guitar tone. With electric there are three major factors to consider…the guitar, the amp, and the effects. There are all types of guitars with all types of pickups. Single Coil pickups and humbucking pickups are the two main pickup categories. I prefer humbuckers for the simple reason that they are less noisy. I like the tone of a good single coil pickup but I have never had much luck with keeping them from buzzing terribly. This is especially a factor when you are playing gigs in dive bars or clubs with bad electric wiring. You are much better off with a humbucking pickup. If you are gigging musician I would suggest having at least one in your arsenal. Generally speaking your Fender strats have single coils and your Les Pauls have humbuckers.
But it would be a mistake to think that this guitar is only suitable for Jason Mraz strumming and happy songs, because it’s just as good for heavy metal! That sweet little tone can easily be transferred to heavy music, or why not pop, jazz or blues? In other words, this guitar is extremely versatile and is the best option for musicians who play many different types of music and want a guitar that works well for pretty much everything.
The good people at Cordoba, therefore, sought to make a Spanish-style guitar with the traditional sound of a Spanish guitar, but the slimmer body and slightly narrower neck of a steel-string. They also added in a Fishman-Presys module for switching the guitar from an acoustic sound to an electric (including a built-in tuner), hence the “Fusion” in the model name.
This guitar also features Epiphone’s patented Locktone Tune-O-Matic Bridge and stop bar tailpiece for serving the easiest string changes and increased sustain. It comes with master volume and master tone controls along with the long-lasting 3-way pickup selector for a bold and controllable performance. The most exclusive feature added by Epiphone is that by pushing a button you can mute all the outputs to add more rock and roll to your performance.
It is nice that it starts easy and progresses as you improve, but there are some catches. If you are really good, you will be annoyed at the pace it adds new material. It also can be frustrating when it adds a few extra notes, you are caught of guard, it takes them away, and you have to play through the song a few times to get them back- at which time they catch you off guard again. I wish you could opt to lock them in, or just reveal all.
While many appreciate its bulk of features, there are a few who feel that Fender went overboard, and should've limited the voicings to just a few to ensure that sound quality is not compromised. On the other hand, there are some who felt that the extra features are nice, but they are turned off by the need to use a computer to get full access to all the controls.
The best course of action is to set a budget that is reasonable - right at the get go - while also considering the cost for other important gear like accessories, cables, amplifiers and effects, should you need them. A good rule of thumb to follow is that entry-level to mid-tier instruments are great for beginners, while more experienced players will want mid-tier to premium guitars.
The Effect: When it comes to effects pedals, those which offer more than one type of effect are usually seen as the best cost effective solution out there. Although many still prefer that standard, standalone configuration, multi-effects pedals have a lot to offer. Take Carl Martin Multi Effects Pedal as an example. This thing is packed to the brim with boutique level effects. Easy to use, a board such as this one can substitute a whole pedalboard depending on the variety of effects you use. One of the other great features of this design is the fact that multi-effect pedals come in both digital and analog form. They have transcended that artificial sounding performance that plagued effects processors some 10 years ago. Today, a multi-effects pedal is every bit as capable as its standalone counterparts. While this design is aimed at everyone, budget oriented users stand to gain the most from it.
Compressor pedals add a softening effect too, by reducing the front edge of notes and amplifying their tails. This increases sustain by bumping up the signal as the note fades out. Most compressors allow you to control both the thresholds (upper and lower limits) and the knee (the speed with which the signal is raised or lowered). The big appeal for guitarists is the compressor's ability to simulate the natural compression that tube amps generate when driven at medium to high levels. A good compressor can help thicken up the sound of your guitar and add extra punch to your performance.
If you're getting your amp for the purposes of playing out with a band, it's very tempting to invest in a large amplifier, whether that means a big combo or a half-stack (don't even mention a full stack). I get it; it's what the pros use when they're rocking out at festivals. The reality there is that the vast majority of the time, whenever you see a guitarist with a wall of sound, it's comprised mainly of dummy cabs with no actual speakers. It's for the look.
Del Rey, of course, is Spanish for “of the king,” which explains the crown. This was no doubt added to the Teisco name, in part, to suggest quality. However, it was also a way to add the de rigeur Spanish cachet necessary for “Spanish” guitars of the time. It was convention that “Spanish” guitars carried Spanish names, except for the well-known brand names – Gibson, Fender, Martin or Kay; thus the plethora of imported guitars named Greco, Ibanez, Goya and Espa�a. Of course, none of these were made in Spain, but rather in Japan, Japan, Sweden and Finland, respectively!
For 2017, they introduced (or re-introduced?) the Firebird Studio. The Studio has regular tuners with protruding keys, and it has regular humbuckers instead of minis. It is not a Firebird, it is a Les Paul with the body of a ‘bird. This lie of a guitar sells for a whopping $1300, and the real version of the guitar - which is identical in every last detail to the cheaper 2016 model I own - now retails for $1500!
View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.
I keep coming back to this point because it’s absolutely essential: learn how to solo over chords. I don’t mean simple chord arpeggiating, even though that has its place, too. If you can follow the chord changes with smooth, soulful playing, you will never be fenced in. You can drop into any style, any band, and any situation. Most of us get stuck playing a given scale pattern for years before something shakes us up. Make this the foundation of your learning with this book.
But the guitar store? They always remember me and treat me like a guest even if I'm not there to buy shit. Everyone there is a genuinely good dude. They're all honest too, which can be hard to find in this industry. I took my guitar in for a check up and they told me doing anything to it would be unnecessary. They could have easily charged me $80 for a set up and taken my guitar.
While musicians intentionally create or add distortion to electric instrument signals or vocals to create a musical effect, there are some musical styles and musical applications where as little distortion as possible is sought. When DJs are playing recorded music in a nightclub, they typically seek to reproduce the recordings with little or no distortion. In many musical styles, including pop music, country music and even genres where the electric guitars are almost always distorted, such as metal and hard rock, sound engineers usually take a number of steps to ensure that the vocals sounding through the sound reinforcement system are undistorted (the exception is the rare cases where distortion is purposely added to vocals in a song as a special effect).
We’ve already shown you how you will sometimes want more than one mic on your amp to achieve ideal sound in your tracks. Many semi-distant and ambient techniques will be most useful, along with a close mic, but on a separate track, to retain the option of blending a more-direct tone to create your overall sonic picture. Any single-mic positions discussed thus far can be combined into multi-mic sounds in the mix when recorded to different tracks. There are also several other approaches to multi-miking that might come in handy now and then, and which are worth some exploration.
So you decided to play electric guitar. Once you get a guitar and an amp, the next step is to explore effects. Effects pedals can be separated into groups based on their functions. Understanding the different pedal groups is the key to getting the best sound when chaining them together. The largest pedal group is probably overdrives and distortions, and BOSS currently makes 16 different pedals in this category. For our example pedal board, we’ll pick the ST-2 Power Stack. Another category with many choices is modulation.These are effects like flanger, phaser, chorus, tremolo, and others. Let’s use the most versatile of these—the BF-3 Flanger. Another group is ambience effects, such as delays and reverbs. We’ll use one of each: a DD-7 Digital Delay and the FRV-1 ’63 Fender Reverb. There are some pedal effects that can add notes or alter the pitch of what you’re playing. For want of a more esoteric name, we’ll call these “pitch-altering” pedals. From this category, let’s throw in a BOSS OC-3 Octave. BOSS also has a few pedals that make your instrument sound like some other instrument. The AC-3 Acoustic Simulator will do the job. Some effects change your sound with filtering. This effect type can be used in different places in the signal path, so we’ll use the GE-7 Graphic EQ. A few BOSS effects defy categorization, but are nevertheless very useful in any signal path. The most common of these is the CS-3 Compression/Sustainer. Loopers fall into this category also, so let’s add an RC-3 Loop Station to the mix. And you might want the NS-2 Noise Suppressor to kill the noise in your rig, so let’s add that in, too. What about a tuner? The TU-3 is the most popular pedal tuner in the world.
Let's begin by getting clear on what we mean by 'effect': an effect is a device that treats the audio in some way, then adds it back to a dry or untreated version of the sound. Echo and reverb are obvious cases, and you can use pitch-shift and pitch modulation in a similar way. 'Processors', by contrast, generally are those devices that change the entire signal and don't add in any of the dry signal. Things like compressors and equalisers fall into this category: as you'll see from the tips and tricks, processors can often be used as effects in their own right, or as part of an effect chain, but until you know exactly what you're doing and what the consequences are likely to be, it is a good idea to stick to these guideline definitions, as they dictate how you can connect the effects into your system.
You probably won’t have to do this, but if you do, here’s how to go about it: First, slacken the affected strings and move them to the sides of the saddles. Then take some needle-nose pliers and remove one end of the retaining spring (different styles of bridge will use different types of retaining spring – sometimes there is an individual one for each saddle, in which case you might even need to remove the whole bridge to do this).
Being a true pro-level instrument, the Yamaha LL16 comes with a jumbo body shape and built-in S.R.T Zero impact electronics. Playability remains beginner friendly, with a low action setup that new players will easily master. And since it comes with an all-solid wood body, this guitar will only sound better and better as it ages. If you are looking for a more long term instrument at the sub $1000 level, check out the Yamaha LS16.
Ukuleles were in highest production from 1916 to the 1930's, though still manufactured in quantity until 1965. Production quantities during some periods were as great as Martin guitars. Martin ukes are considered to be the best for craftsmenship and sound. The Koa wood models are more collectible than mahagony models. The fancier style 5 models are worth more than plainer styles 0 to 3. All sizes are collectible.
Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.
Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.
For larger venues such as stadiums and outdoor music festivals, or for music genres that use bass instruments with an extended lower range and high stage volumes (e.g., heavy metal music, grunge, hardcore punk), bass players often use a more powerful amplifier (300 to 2000 watts or more) and one or more separate speaker cabinets (often called "cabs") in various combinations. Using a separate amplifier cabinet and speaker cabinets is colloquially referred to as a "bass stack". An example of the powerful, loud bass amplifier systems used in grunge is Alice in Chains bassist Mike Inez's setup. He uses four Ampeg SVT-2PRO amplifier heads, two of them plugged into four 1x18" subwoofer cabinets for the low register, and the other two plugged into two 8x10" cabinets.
The Epiphone DR-100 acoustic guitar definitely falls under the category of “entry-level” or “student” instrument, but sound quality has not been sacrificed for the sake of a lower price point. Many guitar instructors urge their students to invest in this model because of its resonant mahogany components. There can be some buzzing because of its lower action, but beginners will have a better learning experience because of the improved tonality. Epiphone is a strong name in guitars, and considering the low price, the DR-100 is a good buy. We recommend it for the mahogany alone, but the tone quality is also appropriate – and perhaps even better than it should be – for the price.
1963 D-28e. This model is a paradox. Martin took a great guitar with great flattop tone, and then added DeArmond pickups and knobs to the top. This ruined the tone (a flattop develops most of its tone from the vibrating top). And the DeArmond pickups don't amplify the acoustic properties of the guitar. So you end up with a electric guitar sound, while playing a flattop. Because of this, the value for D-28e's is really low. Some people go to the extreme of re-topping this model. This essentially gives you a vintage Brazilian rosewood D-28, but with a new top. A double edge sword of originality versus usability. Martin made only 284 D-28e's from 1959 to 1964, before giving up on the model. Rare, but for very good reason (no one wanted them, then or today!).
It's not subjective. When you're setting up a guitar you measure the height of the strings, typically you're at about 4/64" for the high E and 5/64" for the low E. You can go above or below the recommendation but if you go too low you can start to get a bit of fret buzz. How low you can go is not a function so much of what guitar you own, but how level your frets are and your neck relief. Most good guitars can be set up to play "fast". Obviously they don't get faster when you paint them fluorescent orange, or make the headstock pointy.
Interestingly, the neck is crafted from maple, topped by a 20-fret walnut fingerboard which complements the back and sides nicely. Following the specs of older Gibson guitars, the scale length is shorter at 24.75", while the nut width is 1.725", which gives the instrument a comfortable playing feel. Adding to the already good vale of this guitar is the built-in LR Baggs Element electronics for stage performance, with discrete soundhole mounted volume control. If you are looking for a handcrafted workhorse acoustic guitar that will not break the bank, then check this out.
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! VoteinNovember