Many arguments can be made for Peej’s gifted lead guitarist (and corn-dogging, cheese-mongering Stevie Ray Vaughan acolyte) Mike McCready, but it’s Gossard whose songwriting and toothsome licks propelled the Seattle grunge icons early, record-setting releases. The winsome chords of both “Daughter” and “Black,” the white-knuckle smash of “Animal” or “Deep” or “Do the Evolution” — all were anchored by Gossard, a quiet type more invested in classic-rock craft than classic-rock showmanship.
Other than the old cranked amp or faulty preamp channel, these are the grandaddies of distortion devices. Fuzzes were also among the first of the transistorized guitar effects being built back in the early 1960s—which is no surprise when you discover the simplicity of most of them. It’s almost pointless to describe the sound of a vintage-style fuzz tone more than the name already does. They slather a slightly wooly, rounded, warm but sparkly distortion all over the guitar signal (see, you could just say “fuzzy”) to give more meat, girth, and sustain to the sound. More imposing units can be guilty of taking charge of the entire signal and bending it to their own synthetic demands—“brick-wall processing,” as Hendrix-approved effects builder Roger Mayer puts it himself (meaning your signal hits that wall and cannot pass through without a total transformation of its nature and character)—while those which many consider to be the more playable devices retain elements of your dynamics, touch, feel, and core tonality. In the case of “brick wall” type fuzzes, the resultant sound is still, usually, more processed and artificial than any of the preceding types of pedals in this category. The more dynamic fuzz pedals, however, are great for working with you and preserving the critical elements of your touch and tone. Turn a tube amp up to where it’s starting to break up and you’ve got gentle overdrive; crank it to the max and you’ve got heavy distortion. Pull out one of the pair of output tubes, use the wrong-value bias resistor on a preamp tube, or beat it senseless with a crowbar and you might just get it to sound like fuzz. It’s not a natural sound, but it can be a great one, and it’s a major part of many players’ signature tones.
Use a lead to connect the row that the positive (anode) leg of the input cap C1 is on to the row that the base (middle leg) of the transistor Q1 is on. Use a second lead to connect the emitter row (left hand leg) to the ground bus. Finally, use a lead from the collector (right hand leg) row to a new row on the other side of the breadboard, near the power bus.
I bought mine used in 1989 in a mom and pop music store in the North GA mountains in Cumming GA and have loved it everysence I Know very little about it except that I would not trade it for a new one. The sustain in the body of the overtone note is fantastic and rare to find.I use d'Addario phosphorus bronze strings 11 - 52 and would not change anything about this guitar,fantastic!!! Thanks Victor
For a guitar that sits comfortably in the mid-range segment of the market, Yamaha RevStar RS420 packs a decent punch. Body shape is more reminiscent of a PRS than anything else, but Yamaha definitely infused it with their unique details. The sound is tight, very flexible, and I had no issues dialing in the type of tone I was looking for. A well rounded model, that’s for sure.
Hi Jeff. I just wanted to point a couple of things that IMHO are not 100% accurate. Most probably its just to make things not too complicated, but I think is important to notice them. First, resistance is not frecuency dependant, and therefore it doesn´t have any effect on high frecuency content. However, Impedance does, and impedance is the resistance on the AC world (and a guitar signal is an AC signal). Therefore, the reason both long cables and pickups loose high frecuencies as they get longer is because the capacitance in them increases, and capacitors have a certain impedance (once again, resistance in the AC world). So you may actually be true, but its because of impedance created by the capacitance and inductance present on the pickup. Will continue..
Some multi-effects processors have other onboard features. Yes, you can run your guitar sound through scores of effects, but many processors even offer modeling that allows you to replicate scores of digitally modeled guitar sounds with a huge range of pedal effects and also recreate the tones of classic combo amplifier and head/cabinet sounds. In addition, some processors give you the ability to loop and delay; some have drum patterns, built-in tuners, recording software, presets as well as user-programmable effects, built-in expression pedals and phrase trainers that record a passage you can play back at varying speeds for learning and practice. Many multi-effects processors now have USB connectivity and you will also find that almost all have ¼” (instrument cable connectors) and XLR (microphone connectors) inputs and outputs. Unlike simple effects pedals, all these features are packed into one compact unit.
What is an Essex? Also who compiled this list? It definitely wasn't guitar professionals. Every guitar maker has top line and then entry level guitars. Top line for those that can play and entry for the beginner who 9 out of 10 stop playing and they don't care that a $60 to $200 mistake lays in the closet for years. Yamaha makes 100's of styles and a lot are great guitars and some stink. It goes with the territory in a very competitive market. This should have been better defined and broken down by cost levels. Because this could have even been titled "The 10 Best Guitar List"
Clearly if you need a Gibson but have to count your pennies Epiphone should be your top choice. However, Some people don’t realize that Epiphone was once a competitor with Gibson, and even today some of their semi-hollow and hollow-body guitars are worth mentioning with the top brands out there. The Dot is well known as an affordable version of the Gibson ES-335, but there are also guitars like the Casino, Wildkat, Sheraton and Broadway.
And just a quick note: I do not buy or sell guitars. I have no idea what any given guitar from this period would sell for. I don't know if some of the listed guitars are indeed valuable. My sole purpose is to help people looking specifically for information on the maker of their MIJ guitar. So please...don't ask me what your guitar is worth. To me, they're all priceless.
Designed by Mesa founder Randall Smith, the amp uses silicone diodes that give it a gain level and feeling all its own. The amp proved especially popular with metal and hard-rocking groups such as Living Colour, Metallica, Tool, Korn, Soundgarden and Foo Fighters. In 2009, Mesa revamped the Dual with a third, dedicated clean channel, making the venerable workhorse more versatile than ever.
*We build all of our Custom Shop and Semi-Custom instruments from scratch and on demand - therefore, Custom Shop and Semi-Custom orders are fulfilled in the order in which they were received. These times can vary due to demand and the custom options you choose. Our production/assemble time frame: 20 - 25 working days since our professional Control Team and Supervisor Engineer will ensure that your ordered guitar is top notch considering the fact that this guitar is intricate to assemble and they check very carefully every detail such as the finish, fret work, pickups, strings. And also, they will test the sound quality. We do not rush up the process of manufacturing your guitar since we would like to deliver to you best quality performance.
The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place between "jazz-clean" all the way to "blues dirty." If you're aiming high, Ibanez has an ARTSTAR for you.
Guitar lessons work best if you're putting your skills together to learn how to play songs. That's why Guitar Tricks has a ton of great song tutorials for when you've mastered the Core Learning System, or if you want to try something new. These easy guitar songs are great, especially if you're a beginner that recently picked up an electric guitar.
Recent amplifiers may include digital technology similar to effects pedals, up to the ability to model or emulate a variety of classic amplifiers. Some modeling systems also emulate the tonal characteristics of different speaker configurations, cabinets, and microphones. Nearly all amp and speaker cabinet modeling is done digitally, using computer techniques (e.g., Digital Signal Processing or DSP circuitry and software).
This is a FREE service from NoBSGuitar.com. Credit card NOT required. You can unsubscribe at ANY time 24/7. We value your privacy. We will NEVER rent, sell, or give away your email address to anyone for any reason, ever. By signing up, you agree to receive emails from nobsguitar.com, including full guitar lessons, newsletter #1 on the next page, and occasionally, product recommendations we feel are worth your time.
The dual-DSP-powered Helix combines amp and effects models in a large, rugged floor pedal. There are a massive 1,024 preset locations onboard the Helix, organised into eight setlists that contain 32 banks with four presets each. Each preset can have up to four stereo signal paths, each made up of eight blocks populated with amps and effects. With the current count of 41 modelled amps, seven bass amps, 30 cabs, 16 mics, 80 effects and the option of loading speaker impulse responses, there's great potential for sound creation. Line 6 has implemented an easy editing system, complete with a joystick, and - get this - touch-sensitive footswitches offering a shortcut to parameter adjustment; you can even use these with your feet to select a parameter before adjusting it with the pedal treadle! There are some great sounds here, especially when you get beyond the factory presets and shape things to your own taste. The Helix's advantage lies in its comprehensive input/output and signal routing ability, which can facilitate just about any guitar-related studio or onstage task you can think of. However, if you don't need all that connectivity, and want to save a bit of cash, there's also the Line 6 Helix LT.
Power amp clipping is not the same thing as preamp/preamp tube clipping. Sending a power amp signal that is getting power amp clipping to a speaker can blow the speaker. Sending a preamp/preamp tube clipped signal through a speaker is not harmful. In practice, part of the "breaking up" amp sound, of a "cranked" amplifier, which is widely appreciated by hard rock, metal, punk and blues musicians, is a mix of preamp and power amp clipping. One of the benefits of using a separate components head system, in which a separate preamp and power amp are mounted in a rack, is that the bassist or bass tech can watch for the clipping warning LED on the power amp and lower the power amp volume, if necessary.
At some point in this period, the pickups were changed to humbuckers with metal side covers and a see-through grey insert on top. I’ve estimated this changeover took place in about 1973 or ’74, but this is uncertain. Certainly it had been accomplished by ’76, when the next reference appears, so it could have been later (at the time of the Merson/Univox split in ’75?).
Additionally, George Harrison used a custom-built rosewood Telecaster during the recording sessions for The Beatles‘ Let It Be album (including the rooftop concert), played through aLeslie speaker; Big Twist and the Mellow Fellows guitarist Pete Special frequently had reissue of Harrison’s Tele onstage in the mid-1980s, but rarely played it. Pearl Jam singer and guitarist Eddie Vedder has been known to use a custom black Telecaster with a white pickguard containing a black arrow decal pointing towards a target design under the strings. Guitar virtuoso Chet Atkins, known for the variety of acoustic and electric guitars that he used, occasionally played a Telecaster in his duets with Jerry Reed.
The H9 is a pedal that can actually run all of Eventide's stompbox effects (apart from the TimeFactor's Looper). All of the effect algorithms (including their associated presets) are available for purchase, but several come already built in - you get Chorus and Tremolo/Pan from the ModFactor, H910/H949 and Crystals from the PitchFactor, Tape Echo and Vintage Delay from the TimeFactor, and Shimmer and Hall from Space. In addition, there's a new UltraTap Delay that's exclusive to the H9, plus a voucher for a free algorithm of your choice. The complex effects algorithms feature loads of editable parameters. The H9 has both wireless (Bluetooth) and wired (USB) connections for the free H9 Control editor and librarian software (iOS app, Mac, Windows) for editing, creating and managing presets, changing system settings and purchasing algorithms. This pedal has been designed to take full advantage of this and it works brilliantly, especially so on an iPad where a few finger swipes zap the pedal through thin air to produce instant results. Other one-effect-at-a-time 'chameleon' pedals exist out there, but the H9 pushes the genre's envelope.
The SG Standard is Gibson’s all-time best-selling guitar. It was conceived in 1961 and originally released as the new Les Paul. It featured distinct horn-shaped cutaways, and the neck joint was moved three frets, which made the guitar lighter and allowed easier upper fret access. In addition to these changes, the body was slimmer than the Les Paul Standard and the neck profile was more slender. However, with Mr. Paul preferring the sturdier design elements of his original model and due to contractual complications, his name was ultimately removed. Where Les Paul saw a mutation of his original design, others saw genius—from ’63 on, the Les Paul name was removed and the SG, or “Solid Guitar,” was born.
1975 Gibson Les Paul "Goldtop", Deluxe to Standard conversion, Electric Guitar. This is from my personal collection. I have another and mostly play my Strat and Tele for the music I'm doing now, so it's time to thin the herd (be aware that I might change my mind about selling it). Great, original Gold Top finish with nice checking. I was actually trying find one with a lot of "green" wear on the top of the body, but this one still has some good character (I hate shiny guitars). Plenty of wear to the finish on the back (see photos). Other than a pickup change and strap button change, the guitar is as I bought it used. When I purchased it there was a set of THC, PAF'S installed (don't ask, they're gone). Personally, I didn't care for them for a few reasons, so I replaced the front with a new, Gibson 490R, AlNiCo II and a Seymour Duncan, Seth Lover in the bridge. Pots have been replaced and the selector switch appears to be original. It already had the Deluxe to Standard conversion work done (no the truss rod cover is not the original, as it should say deluxe). I believe the bridge and tailpiece are newer units as they shine too much for the rest of the guitar. The jack plate has been changed from plastic to metal. I installed the Schaller strap lock buttons. The tuning machines have been changed to sealed Grovers. The headstock has been re-fin'd in the back, from an what looks to be repairs around the tuners. In doing so, the serial was made very faint, and only somewhat readable. Appears to be "92?128". Has the 70's volute for added headstock strength. Bound, Rosewood fingerboard. Mahogany neck. Plays and sounds great. Original frets have normal amount of wear with plenty of years left in them. Neck and action is adjusted perfectly (for me anyway) and I did guitar set-ups for 12 years at a Fender / Gibson / Martin / Yamaha / etc dealership at $45-$150 a pop. I have sold guitars for many years and have been to "vintage" shows, so I'm fairly versed in guitar speak. This is not a "minty" show piece. If that's what you're looking for, then buy another guitar. This is a player's guitar. The guitar has not had the headstock broken off however like many used Gibsons. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body) and cleaning and polishing. STAYS IN TUNE!!! I play it though all three of my amps, a Trace Elliot "Super Tramp", Marshall JCM-800 and a '67 Fender Super Reverb (original). Plays and sounds great for about any type of music, except the currently installed pickups are probably too hot for jazz. We also installed a new set of .010 strings. The cream colored pick guard and chrome bracket is in the case pocket, I just removed it as I don't play with them installed on any of my Pauls. It's in fine shape if you wish to install it. Guitar weighs in at 10.5 lbs, assuming our UPS scale is reasonably correct. Original Gibson, Les Paul case with the purple lining included (the lockable latch is locked "open" and we do not have a key. Case still stays closed with the other latches. It was that way when I bought it years back).
Good looks and playability seem to be the two biggest selling points of the Ibanez AEG10II. Many describe it as a fun instrument, thanks to its comfortably thin profile body and fast action setup. A good portion of its positive reviews are from users who after gigging with the guitar, have great things to say about its reliability and amplified sound.
As music professionals, we're all familiar with guitarists and the rows of pedals they set up on stage at every gig. They're definitely on to something when it comes to effects on-the-fly, but when you're setting up a studio or pro audio rig, there's a simpler solution: multi effects processors. These full-sized units bring a ton of versatility to the table (or, more accurately speaking, the rack) and they can play a crucial role in shaping your own signature sound.
(Book). To mark the 60th anniversary of Fender, Backbeat's introduced a new, completely revised third edition of this bestseller. Fender guitars have long been the instruments of choice for artists such as Jeff Beck, Eric Clapton, Jimi Hendrix and Stevie Ray Vaughan. This book tells the complete story of Fender guitars, detailing classics such as the Telecaster, Stratocaster & Jazzmaster as well as lesser-known models. Dozens of photos reveal Fender's storied craftsmanship, while the text includes collector details for all models. The reference section lists all models and their statistics. This new edition has been refreshed and updated, with 56 extra pages and over 60 new photographs. The main text has added material and has been brought up to date to cover Fender's ever-changing history amid the fascinating developments for the company and its instruments during the eight years since the previous edition.
Fast forward a few hundred years to the world of guitar pedals. The first registered portable effect pedal for guitarists built in 1941, called the DeArmond 601 Tremolo Control, was a clumsy toaster oven-shaped unit with a heavy granite-like exterior. The tremolo effect worked by reducing the signal from the guitar several times a second through an electrolytic hydro-fluid located in a glass canister inside the unit. When activated, the main voltage motor rapidly shook the canister, causing the fluid (water, windex, and even mercury) to stir and splash against the pin and the guitar signal to ground, creating a “watery” tremolo sound.
While he could put out an album of his farts or slap his name on any shitty guitar and still make millions, he is a painstaking perfectionist who spent years agonizing over every minute detail of his EVH Wolfgang guitar and EVH 5150 III amp before offering it to the public and who has refused to release a new Van Halen album until he feels it’s ready.
Volume Swell Normally guitar has a very fast attack. It is at its loudest just after a not has been picked and there is a definite picked sound. You can get a softer pad style sound be picking with the volume off or very low and then raising the volume as the note/chord plays. This can be done with the guitar's own volume knob, but sometimes it is more convenient to leave your picking hand free and use a rocker pedal. By adding delay and/or reverb you can soften the note's ending also so that it doesn't stop abruptly.
Martin's OM, or "Orchestra Model", available from 1929 to 1933, has a rare combination of features. The joining of a long-scale (25.4") neck with a small body makes it an extremely responsive and playable guitar. In many ways the OM models were the first truly modern flattop guitars. They were the first Martins to have necks with 14 frets clear of the body. The OM has a wide neck (1 3/4" as opposed to the dreadnought's 1 11/16") which appeals to fingerstyle players. The string spacing is slightly greater at the bridge than on other models too, although not as wide as a classical guitars. The neck shape of old OMs is a bit unique too, although this is variable since each neck was handmade. OMs have a wide but thin backshaped V-shape which is very comfortable. Finally, the OM's smaller body size makes the guitar easy to hold, especially in the seated position. Compared this to the D dreadnought which is larger both in body depth and width (dreadnought players seem to use straps and stand up so the guitar's size is less of a factor).
Everything about the shape and feel of the S6 Original is meant to be as close to familiar acoustic guitars as possible, including its playability, which is brought about by its 25.5" scale length, 1.8" nut width and 16" fingerboard radius. Tone wise, you're getting a crisp yet warm tone thanks to its pressure-tested solid cedar top, which also adds to the overall earthy appeal of the instrument.
The effect also took Nashville by storm in the 70’s as well and was a favorite of Waylon Jennings’ music and others. What the effect does is mix the guitars signal with a slightly delayed reproduction of the signal. This delay shifts the waveform a few milliseconds thus producing the out of phase sound. It then uses a LFO (low frequency oscillator) to control the sweeping effect of the phaser. This pedal is key to the classic VH guitar sound!
As a teacher I use a strat because it’s relatable, comfortable, and clean/clear tones. The gibson doesn’t have warmer overtones. That’s not a thing. It has weaker overtones, so a stronger fundamental. That’s why it sounds warmer/duller, and the fender sounds more lively/brighter, because the fender (longer scale) have more overtones to ring louder. That lets you hear mistakes more easily, and is helpful to improve more quickly.
In general, using an acoustic electric guitar expands your possibilities. You are no longer limited to the volume the guitar itself is capable of producing, which can come in pretty handy at times, nor having to mic an amplifier either. With an acoustic electric, you can perform in just about any venue that's worth its salt, without dealing with close miking and a lot of post-processing like equalizing out the boomy low-end.
This happens when discussing variables within a number of different art forms—you simply can’t rely on scientific equipment to make some assessments. You can’t trust the gadgets; instead, you have to rely on your ears. Even relying on your ears can be difficult because it is, once again, a subjective discussion. “We don’t hear what’s out there,” Millard says. “We hear what we think we hear. It’s the psychological or neurological way we hear. To think we hear what sound is out there is so naïve and so wrong.” Trustworthiness aside, this brings us to another concept that pops up frequently when discussing the nature of tone: the role of good old fashioned, organic, human beings.
The Thunderbird IV was first introduced in 1963 and instantly became one of rock's most recognizable bass guitar designs. For almost five decades, the Thunderbird has powered artists as varied as Nikki Sixx, The Who, Kings of Leon, Cheap Trick, Lynyrd Skynyrd, Steely Dan and The Silversun Pickups. Turn on your radio and you'll hear a Thunderbird bass. Now, Epiphone takes all the vintage mojo of the original Thunderbird IV and sends it flying into the future with Gibson TB Plus humbuckers with ceramic magnets and all the 'Bird's original styling and features intact.
Soundwise, it still packs the same AudioDNA2 processor but somehow sounds 'better', I think John Johnson (founder of Digitech before it was sold to Harman re-hired to work on this RP) had a lot to do with the improvements. I think they have made this with it being used/abused in mind, from the rigid metal chasis, to the USB connectivity, line-in jack to play along backing tracks, headphone input, stereo out, built-in looper (40 seconds) and the awesome Stompbox and SoundCheck features.
Now, you may be wondering if there are things to love about Guitarist and there certainly are. The GUI is incredible and simply one of my favorites around. And if you need funk or jazz rhythms fast, then this is your guy — the auto-wah feature saves this plugin. The more you put realism out of your head and strive for interesting tones, the more you’ll like Guitarist.
that is not quite the reality since most are made in mexico or japan as they are of lower quality. You only meet those type of criterion when you buy a high handmade guitar which will be at least 1200 us or 1600 canadian. As you meet the entry level of solid wood prices better overall quality. It doesn't matter who makes the guitar : martin taylor, gibson, maton, collings, santa cruz, or even a high end a high high luthier like Olson, traugott or Ryan. The sound of the instrument and the perception that we have while we stroke a chord will define if we like the sound. We see how it feels, we look at a price that we feel comfortable with. Otherwise anyone would land a lowden, huss and dalton, bourgeois and the marquis version of Martin hd-28vs for instance. The personality of your style will infuence a lot of more then who makes it, because you buy the final product not the people who makes it.
I am not satisfied with the sound I am getting from my guitar so I have decided to invest in a new set of strings. I bought an Electric guitar about 1 year ago and have not changed the strings as yet. Since it was not new when I bought it so I do not know how long they have been on it. I am not sure what the gauge of the strings are. I am trying to play lead. Should I go for a .,08 or .09 or a bit higher? I want to do bends as well.
Frets & Necks did an AMAZING job on my RG7421. They installed my BKP Black Hawk p/u's and new tone/volume pots. Frets & Necks service was above and beyond, fast and super knowledgeable. I am very pick...y about who works on my guitars, I am beyond pleased that I chose Frets& Necks to work on my RG. I will be bringing my RG7421 back to Frets & Necks for future upgrades very soon. Be good to yourself and treat your guitar, give Frets & Necks a try. You won't be disappointed. Thank you F&N. See More
The tone selector on an electric guitar controls the capacitor, which basically filters out high frequencies. The same way a high-cut filter (or low-pass-filter if you prefer) works on a standard equalizer. By dialing down the tone, you remove brightness and treble. The pickup selector does just what it's called.. Selecting which pickups being used to capture the vibration of the strings, and translates the energy into electric current, though the configuration and number of "presets" can vary from guitar to guitar, depending on how many pickups it has etc. If you're a handyman you can even configure this yourself.
This is a Japanese Fender Jaguar electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This amp gives a really nice full clean sound. I have recorded it on the edge of break up so the low velocity samples come out clean and the high velocity samples come out with a bit of nataural power valve distortion. You can add more distortion with effects if you need it dirtier. It is hard to get this natural break up sound with effects which is why I have recorded it that way and if you add distortion it still has the natural bite of a valve amp (except with more distortion). This makes it very expressive just by the difference in tones at different played velocities. The lowest velocity is muted samples. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them. The sound is suited to a lot of types of music. These guitars have been used for all sorts of music over the years. It has not much sustain and makes a bright clean sound.
If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
I'll be referring to a lot of different producers in this article, and it's understandable that you may not have initially heard of some of them, even if you've probably heard some of their productions. To avoid an avalanche of parentheses, I've put a list of all the producers I mention into a box which runs across the bottom of this article. The box also includes a few of their most celebrated credits, so that you can have some idea of where each of them is coming from stylistically.
One cool thing about liking oddball old guitars is they always contain hope…and a challenge. By which I mean, no matter how obscure or exotic, you always live with hope that you’ll someday figure out what the heck they are and thrive on the challenge of trying to do so. At least that’s been my repeated experience over the last quarter century or so of playing guitar detective. That being said, this 1967 Apollo Deluxe was kind of the exception that proved the rule, in that it followed a reverse pattern, sort of backing into discovery.
When you are also tracking a close mic at the same time, you might try variations of the approaches discussed in the sections above on distant-miking or ambient-miking to get a little or a lot more room sound into the brew. This often will capture the best overall sound for a range of musical styles – the close mic delivers punch and plenty of midrange grind (depending on mic choice), while the distant mic – placed from about 12″ away to several feet – adds depth, dimension, and the natural reverberation of the space. After careful consideration for both mic placements (using the “position, listen, re-position” techniques discussed above to find ideal on-the-track sound from each mic), some skill in the mixing process is also often required to make the most of any multi-mic setup. The discussion about phase alignment in the sidebar (“Correcting Phase Issues”) is often a big part of this post-tracking approach to maximizing multi-mic techniques, but also be aware that you can use whatever proportional blend of the two tracks works best, a variety of effects and dynamic treatments on each track, and whatever panning of the pair best suits your overall mix, from dead-on together to any different pan of each within the stereo field.
Six full steps (one octave) down from standard tuning. The Low E has the same fundamental frequency as a bass guitar, essentially the same standard tuning as a bass guitar but with a high B and E added to mimic a regular guitar. This tuning is used on the Fender Bass VI and similar instruments. Notably used by John Lennon with The Beatles, Robert Smith of The Cure and Jack Bruce of Cream. In his early days with Ronnie Hawkins, future Band bassist Rick Danko was also seen with a Fender Bass VI. This is the tuning Earth used on their seminal drone doom album, Earth 2. Also used in some Doom Metal and Sludge Metal bands such as Thou.