Most people who use this alternate tuning method change the pitch of the sixth string only, the low E, from E to D. This is frequently used for Rock songs when you want a darker tone, such as with Heavy Metal. In addition, dropping the E string two steps to D means that you can play power chords with one finger. Some people also drop the first string (high e) down to D, resulting in D-A-D-G-B-D.
Double bass players performing in genres where the bass is slapped, either by pulling the string until it snaps back onto the fingerboard or striking the strings, such as traditional blues, rockabilly, psychobilly jazz, folk, and bluegrass often blend the sounds picked up by a piezoelectric transducer with the sounds picked up by a small condenser microphone mounted on the bridge. The microphone picks up the resonance coming from the body and the sounds of the strings being plucked, bowed, or slapped. The two sound signals are blended using a simple mixer and then routed to the amplifier. While many upright bass players use combo amplifiers, bassists in genres that use high stage volume, such as the punk-rockabilly genre of psychobilly use "bass stacks". Some jazz bassists and other bass players who play in small venues use specialized, expensive upright bass amps, like the Acoustic Image combo amplifier.
After the dissolve of Kay/Valco in 1968, the Engelhardt-Link company bought the upright bass and cello lines[clarification needed] at the asset auction in 1969, and continue to produce the same instrument lines till today. Manufactured in Elk Grove Village, Illinois, Engelhardt basses and cellos are sturdy instruments, widely used by students and touring professionals. The ES9 Swingmaster bass (formerly the Kay S9 Swingmaster), is highly thought-of by jazz, swing, and bluegrass musicians.
Amplifier heads are the standalone electronic components of an amp stack. A head unit is designed to be used with external speakers, and is usually much more powerful than the head section built into a combo amp. There are two main sections to the head unit: the preamp and the power amp. These circuits are one of the most important considerations when choosing your combo amp or head, because this is where tubes come into play. Check out the latest Fender Bassbreaker Amplifiers. They offer modern appointments while maintaining the vintage Fender sound. 

We would recommend that you, for your first guitar, spend between $500-$1000. This price range is good, because you know that you will be getting a guitar that is made for some serious music making (which the cheapest ones out there just aren’t). Of course you don’t want to spend this much money on something you’re not even sure you will be using a year from now, so if you aren’t that serious about learning to play the guitar it might be a good idea to go for an even cheaper option.


Our very first impression of the American Special Telecaster was that it’s such a good guitar. There is just something about it that feels remarkable. It’s hard to point to one particular thing, what does it is the combination of design, sound and feeling. We love the alder body and the maple neck that makes your music sound great, and the Texas Special pickups make everything we play on this guitar sound amazing.
This list is an amateurish joke. Many guitars listed are pure cheap junk I'd toss in the garbage even if they were free. Take it from a 45-year Pro, Parker & PRS are the 2 highest quality. Fender, Ric and Gibson, along w/ brands that have stood the test of time, plus a few hand-made (custom) brands are the only ones you can seriously depend on. The rest are mostly pathetic attempts at copying a major brand and cutting the price by REALLY cutting back on quality. As they say: "You get what you pay for. "

The main advantage of the Rocktron Velocity V10 is the low price tag. It is one of the better values for beginner guitar amps out there. There is nothing particularly amazing about the Velocity V10 in its own right, but it can potentially cost less than half as much as some other beginner level amps. The Velocity V10 is capable enough to be a solid practice amp with a price that almost nothing of similar quality can match. It is a good budget option that delivers on all the actually necessary features.
"I've always thought that most people mic amps too closely," comments Alan Parsons. "They supposedly make up with an ambient mic, but I much prefer to find a mic position that works and process that, rather than mix in too much ambience." Despite Parsons' disapproval, though, a lot of the engineers I researched divulged that they use additional ambient mics to capture more of the sound of the room in which the guitar cab was recorded.
Lolol lame azz I knew if I kept reading your BS comment you would start nameing all your crapy azz guitars haha lol no one cares or gives a flying fuck what you have or own.... (What you must of sounded like when you were 12 and lame as today) Oohhh I'm sooooo cool I have jimi's guitar and eric's guitar cause I'm their nephiew ya there my uncles hmm mm both of them I own and play with there guitars all the time woooo hooooo...............
Item Weight 9.6 ounces Product Dimensions 2.5 x 2.8 x 4.2 inches True Bypass Footswitch Zinc Alloy Outer Cover Transparent top knob and 2 cool small black knobs Psychedelic music uses the imagination to filter how we understand this strange ad beautiful world we live in: through melody and noise, with echoes and ambience, with peace and love. The TAPE EKO is a smart echo pedal that embodies the soul of the classic tape echo sound. It provides three delay modes: Mode I, Mode II, and reverse mode. Mode I gives you all the advantages of a digital delay. Compared with other tape echo effects, this mode produces a brighter, cleaner tone with less noise, all without sacrificing warmth or dynamics. Mode II differs from Mode I in terms of dynamics.
It's a basic rule of physics (called Faraday's law) that a changing magnetic field produces electricity. So a guitar string will produce electricity only for as long as the magnetic field is changing—in other words, for only as long as the metal string is moving. Once the string stops vibrating, the sound stops. In that respect, an electric guitar is just like an acoustic one.
Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (Some sources, or maybe just one source quoted all over the net, states that they may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. There are several photos on the net showing David Bowie in his Ziggy Stardust days playing a red Hagstrom with Kent branding on the headstock.
I should also add that I said I expect the Authentics to come in the medium string height range, because they are trying to replicate the kind of vintage Martins coveted by Bluegrass musicians, who are either used to or seek out slightly higher action compared to modern guitars. There are exceptions of course since Tony Rice and Robert Shafer both prefer action so low it is practically resting on the frets.
{ "thumbImageID": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000", "defaultDisplayName": "Takamine G Series GD30CE-12 Dreadnought 12-String Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000034308", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "769.99", "priceVisibility": "1", "skuUrl": "/Takamine/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black-1500000034308.gc", "skuImageId": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000", "brandName": "Takamine", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51372692952068", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "769.99", "priceVisibility": "1", "skuUrl": "/Takamine/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural-1372692952068.gc", "skuImageId": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural/H99532000001000", "brandName": "Takamine", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural/H99532000001000-00-60x60.jpg", "imgAlt": "" } ] }

Nice-4-Bass-V1.5 This is an sf2 simplified version of three different basses - all with 4 velocity layers.  It includes the 1958 Otto Rubner double bass played and mapped by Drogomir Smolken, recorded by Ludwik Zamenhof. The samples are exceptional and some percussive effects have been mapped to some high notes. Royalty-free for all commercial and non-commercial use. Copyright 2016 Karoryfer Lecolds (Karoryfer Samples). The original Meatbass sfz version for Sforzando has round-robin sampling and includes arco as well as pizzicato presets.  (http://www.karoryfer.com/karoryfer-samples).
Schecter is a really great guitar brand. When I was looking for my electric I searched through many guitar brands most of which are on this list and the only one that really felt right in my hands was the Schecter I play. Its got awesome tone quality, gorgeous body design and fret inlay along with very nice balance and it will stay relatively in tune for up to a few days at a time without the pegs slipping. Great for metal and rock and even really lots of other genres as well. Performs very well it should be at least top 5 if not top 3.

Muddy Waters is obviously one of the most recognized and influential blues artists of this century. When his name is mentioned phrases like "slide guitar" and "electric Chicago blues" are associated with it, but what about "wah-wah" and "psychedelic"? For a small period in history, Muddy Waters' image became one of a psychedelic icon and if there weren't records still around from then, most people would doubt it had ever happened. The sixties were a strange time for music and musicians- none felt stranger than musicians from the previous decade trying to stay afloat then. Many times in music, established artists will try to expand upon their work and take a chance with something different. They should at least be praised and encouraged when they try to experiment with their sound. If music were condemned to always following a strict guideline of rules, it would be pretty boring. Music should be allowed to grow and explore new territories because everyone can agree that it's not exciting if it's always predictable.


Semi-hollow designs are similar to hollow-body guitars, but typically feature a thinner body with a central wooden block inside. This helps to control feedback while giving the instrument some of the same tonal characteristics as a hollow-body. This type of guitar has been used successfully in just about every genre of music, with the exception of extreme metal.

Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Custom - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Brown


RARE Epiphone Vintage FT-150 Bard Lefty Conversion with bone saddle. Spruce top, rosewood back and sides. Medium to low action. Beautiful sounding and playing guitar. Superb projection. Rivals guitars costing thousands.In excellent cosmetic condition with normal fretwear for a guitar it's age, and tiny dings here and there but nothing that stands out and looks gorgeous. Includes original right-handed, adjustable bridge. Includes hard shell case and original right-hand adjustable bridge if you wanna convert it back to a righty!
Now, before you buy a brand new electric guitar, it is a good idea to pause and think about the purpose that you are buying it for. Do you just want to learn from it? Maybe you will want to upgrade it after a year or two when you become a more skilled guitarist? If this is the case, go with the most basic or affordable guitar. You don’t need anything fancy yet.
Six-point rocking tremolo: This was the original rocking vibrato designed by Fender in the 1950s. Like the two-point tremolo, it is through-body, spring-loaded, and provides individual string intonation and height adjustment. Some players feel that because this type of tremolo rocks on six screws it provides greater vibration transfer to the top and hence better resonance.
The Tone knobs on electric guitars are really just potentiometers. It’s important to know that they do not ADD treble or bass to your sound, they only remove higher frequencies as you turn them down and restore those frequencies to the sound as you turn them up. When they are set at 10, you are getting all the frequencies that your guitar and pickups can produce. In some cases, this may sound too shrill or harsh so if you turn the tone knob down, you are removing some of the higher frequencies or “rolling off “ the treble. Turning the knob back up towards 10 restores those frequencies, but isn’t actively “adding” treble frequencies to what your pickups are capable of producing.
The Science of Electric Guitars and Guitar Electronics considers the electric guitar and related accessories from a scientific point of view. The majority of books about electric guitars try to avoid using mathematics when describing the scientific phenomena related to the electric guitar. However, mathematics is an invaluable tool in the design processes of all areas of technology, even when designing musical instruments and audio electronics. This book presents simple mathematical methods for modelling the electric guitar as a signal source for electric circuits such as effect pedals and amplifiers. In addition to modelling the electronics inside the electric guitar, the principles of operation of some vintage guitar effects and amplifier circuits are explained and analysed using systematic methods of circuit analysis. The book is intended for everyone who is interested in the design and analysis of basic analogue electronics used in the electric guitar and guitar-related accessories. The presented topics cover the whole signal chain from the guitar strings to the loudspeaker. Therefore, a solid foundation is established for creating own designs in guitar electronics using basic components of analogue electronics.
Bracing affects the way the guitar sounds because it changes the pitch or tune that the guitar produces out of the sound hole. Personally I think X bracing is the b est because it produces a more even and better more balance for mids and high notes and just enough bass on the E and A strings that gives a brighter more even tone. Blinded or pessed bracing gives a much deeper sound than x bracing which =less versatility but if you bought a pressed dread knot or anything else you'll still be okay just remember strings make a huge difference and running your guitar to the right amount of tone for any song will work it's just that Taylor produces the best over all guitar itself by better quality woods and they go through ver strict and rigorous testing and inspections before they are sold to retailers and customers. Higher grade parts attention to detail and style of music versatility is why one guitar can cost 3 times as much. Most companies like Taylor is know give warranties or $ back
Now, instead of just containing part of the sound completely, the tone knob is hooked up to a capacitor. The capacitor doesn't let everything through. Basically, it starts with the highest frequencies, letting them through to be contained rather than go to the amplifier. The more of the signal you send to the capacitor, though, the more of the spectrum it is forced to let through, meaning that more and more of the high end of the continuum is let through - the rest of the current is sent back and is let out through the line to the amp.
Quality-wise, they range from complete and utter crap, to OMG! Acoustics, tend to fall into the former range. Electrics, mostly the hollow bodies, were somewhat, but not always better. Solid bodies, mostly made from plywood, BUT they do have their own feel and sound. I happen to love them, others despise that cheap feel and sound. Remember, they were built to fill the growing demand of guitars, that the kids saw on tv, with the Monkee's and the Beatles

In reality, arenas and festival grounds are the only places where anything bigger than a half stack would make sense. In smaller venues, the problem is always the same: amps can't be louder then the drums or the vocals. Listen to any good recording of your favorite bands and you'll notice that the kick drum, snare drum, and vocals are the highest in the mix. If you don't replicate this live the songs sound lost and washed out.
The 4000 series were the first Rickenbacker bass guitars, production beginning in 1957. The 4000 was followed by the very popular 4001 (in 1961), the 4002 (limited edition bass introduced in 1977), the 4008 (an eight-string model introduced in the mid-1970s), the 4003 (in 1979, replacing the 4001 entirely in 1986 and still in production in 2012), and most recently the 4004 series. There was also the 4005, a hollow-bodied bass guitar (discontinued in 1984); it did not resemble any of the other 4000 series basses, but rather the new style 360-370 guitars. The 4001S (introduced 1964) was basically a 4001 but with no binding and dot fingerboard inlays. It was exported to England as the RM1999. However, Paul McCartney received the very first 4001S (his unit was left-handed, and later modified to include a “zero fret“).
High-end solid-state amplifiers are less common, since many professional guitarists favor vacuum tubes.[citation needed] Some[who?] jazz guitarists favor the "cleaner" sound of solid-state amplifiers. Only a few solid-state amps have enduring attraction, such as the Roland Jazz Chorus.[15][16][17] Solid-state amplifiers vary in output power, functionality, size, price, and sound quality in a wide range, from practice amplifiers to combos suitable for gigging to professional models intended for session musicians who do studio recording work.
The Les Paul Custom single cutaway was discontinued in 1961 and replaced with the SG (as we know it) designation for “solid guitar”. This model featured a thin 1-5/16″ body and a double cutaway. Confusion abounds to this day over the name Les Paul Custom. Since the single cutaway was discontinued, Gibson transferred the name Les Paul Custom to the new models.
Wildwood Guitars is proud to be recognized as one of nine authorized online Gibson dealers. We invite you to browse our extensive inventory and discover the magic of one of the greatest American brands of all time. Located in the heart of Tennessee, the Gibson Memphis factory is known for crafting the majority of Gibson’s incredible semi-hollow and hollowbody instruments. These guitars are overflowing with the soul of the city they’re born in, and they represent the ultimate in both vibe and versatility.
Tube amps are appreciated for their high fidelity, which allows for the player’s ability and the quality of the guitar to be put to full fruition, and for their equally natural overdrive, which is achieved easier than with most solid state amps. However, besides being more expensive as an initial purchase, tube amps will also prove harder to maintain since lamps have a tendency of blowing up and are themselves quite expensive.
The shadows are his home and keeping Gotham's citizens safe is his sustenance. Darkness envelops his every move and his legend lives in the whispers of each passerby. Known by many names — the Caped Crusader, the Dark Knight, Batman — this man lives to protect. But by pitting himself against the criminals of a city, he has only made his laundry list of powerful enemies grow. One after another, a new and nefarious threat has risen up and one after another Batman succeeded in bringing them down. But what happens when those menacing masterminds join forces? Who will rescue Gotham when a deadly roster of depraved lunatics gangs up on the shadowed warrior? Who will save us all? The finale to the legendary Arkham series explodes onto your screen in the most adrenaline-pumping storyline yet. The Scarecrow has returned to Gotham City and he has united a terrifying team of super villains, including Penguin, Two-Face and Harley Quinn. For the first time in the franchise, you get to step behind the wheel of the iconic Batmobile as you harness the power of Batman and scramble to outwit the wicked gang after your blood. Tear through the streets and soar across the skyline in heart-pounding gameplay that will suck you in and force you to ask yourself if you have what it takes to save Gotham. Do you have it within you to be the hero the city needs? Or will the villains of Gotham overtake the Dark Knight once and for all?

{"pageName":"[mf] pdp: ibanez artstar as153 semihollow electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";H91419","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] product detail page"}
The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Wood: Maple & Walnut - Fingerboard: Maple - Frets: Jumbo - Inlay: Black - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line, Reverse - Bridge: Lo-Pro Edge - Hardware: 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: DiMarzio - Pickup Configuration: H-S-H - String Instrument Finish: White
Salas is also bullish about the guitar’s prospects. “My 10-year-old son is at school in Austin, Texas and him and his friends are rocking out to 1970s funk,” he said. “A new generation is getting into guitar and rock’n’roll. I believe there’s going to be a massive comeback and that means with that style of music the electric guitar is going to make a comeback.”
Just like in a conventional guitar, an electric guitar also has 6 strings with tuning knobs and frets. However, unlike the hollow body and cavity of an acoustic guitar, a solid body usually forms the lower part of an electric guitar. The long neck of the electric guitar consists of magnetic pickups, parts which produce the magnetic field and which are located just below the metal strings. The magnetic pickups are connected to the amplifier with an internal electrical circuit. The long neck of an electric guitar also consists of knobs for adjusting the elasticity of metal strings.
Like a door that's repeatedly opened and closed, you'll sometimes need some basic maintenance. Ensure everything is tight, and get some electronic contact cleaner (available at any electronics store), various screwdrivers and wrenches and you can often solve your own problems. It's easier on a Gibson Les Paul (with backplate access to the controls) than on a Gibson ES-335, but it can be done.
The basic function of the volume knob is to change the level of your guitar’s volume output in a smooth and even way. But there’s more to it than that. Some players use the volume knob as a means of boosting their signal to make solos pop out. For example, if you keep your volume dialed in at seven or eight and perhaps lean on your amp a little more for output, you’ve got two or three more notches to ride your loudness up via the knob when it’s really time to burn. No need to spend money on a volume pedal, and unlike distortion or overdrive pedals this doesn’t change your sound much.
Now that said, the orientation of the individual saddles does have some significance. In an ideal world, you would have all of the saddles sitting with the flat side facing the pickups. This is so that there is an immediate fall-off as soon as the strings clear the saddles so that they vibrate as cleanly as possible. At the same time, the fall-off towards the stop bar tailpiece is a little more relaxed and possibly a little more forgiving on your strings. In the real world, however, you may have to swap one or more around in order to intonate the guitar properly, and this is more important.
I have a sunset hellraiser fr. I have been playing for 8yrs and it is by far the best guitar I have ever owned or even played. Next to the ltd models that I was considering the schecter had better quality, feel, and sound at almost HALF the price of the high end lts. The quality of the abalone inlays, the finish (black cherry), the original floyd, grover tuners, 24 fret rosewood board, incredible set neck (you would think its a neckthrough without checking the specs), and the coil tapping emgs is unbelievable. I could go on forever about this guitar's action, sound, feel, quality, looks... I have spent over a 1000$ on a few dif. Guitars and I will never do it again. Ex- zack wylde epi, 2 usa fenders couple mex. 1's, a gibson Linkin Park standard, ltd kh-602, and a really nice jackson dinky style(not sure model) with 3 carvin humbuckers coiltaped just to name a few. Hellraiser is better than all of them. I recommend any of the hellraiser guitars especially with coil tapping emgs.

Indeed, pros can be picky. Of course, they’ve heard, played and tried out innumerable electric guitars over the years and often have a high standard when it comes to the build, tone, playability and overall quality of the instrument. Many professional guitar players already consider themselves collectors, taking pride in what they have in their guitar arsenal.
Repair body wings. These wings form the main body shape and may have been broken by dropping the guitar or other damaging methods. If you do not properly glue in the wings you will need to use extra caution as to not break the bond. Repairing wings or any body wood is rarely necessary, especially on a thick guitar body such as a Les Paul Standard. It may be needed on a smaller bodied guitar much like a Les Paul Junior.
* 3 most basic reverb modes: Room: Simulates the spaciousness of a room; Hall: Simulates the spatial dimension of a music hall; Plate: Simulates the unique reverberation character only coming from a plate reverberator. * One reverb control balances the dry/wet signal, simple enough to dial in the perfect amount of reverb for your tonal needs. * True bypass for zero tonal coloration. * Extreme mini size for great compactness. * Heavy-duty metal casing for great stability and durability; Connectors include input, output, and power supply; Powered by 9v DC. W/ a 6 inch patch cable included. SONICAKE Digital Reverb is reverb pedal designed to add dimension and spaciousness to your tone. It is extremely straight-forward to use with only one “Reverb” knob to adjust the balance between the raw d.
For example, Al Schmitt starts with the traditional SM57 close mic, on axis but a little off the centre of the cone. "Then I'll put a really good mic up — maybe a Neumann U67 or an M50 — for the room... It could be anywhere from 15 to 20 feet away." It's worth noting that the M50 is an omni microphone and, although the omni polar pattern is only very occasionally mentioned for close-miking, it makes a much more sensible choice for capturing natural room ambience.

Originally, distortion of the guitar signal happened accidentally when tube amps were turned up too loud. While distortion was first considered undesirable, players soon came to recognize that a distorted signal increased the amount of sustain they could get out of each note. This essential discovery created a fundamental shift in guitar soloing styles to include extended notes such as those produced by a wind instrument or organ. Used on rhythm guitar parts, distortion thickens up the signal and allows for a much heavier, chunkier sound.


I have been using it since 3 years. It is not even costly. Its good looking and I think its even better than gibson. It even very easy to tune for it has a very good sound quality. More over it has a beautiful look like a guitar. Even a beginner should be advised to buy this guitar for it cost a minimum of 3000 rs. So as it is less costly and more quality it's the best for me. I even like lakewood but its cost is just my dream.

Taylor is other remarkable guitar brand which manufactures good looking guitar with easy instruction to play. And people can easily but it medium price budget. Just try out this brand and test once and you will get to know its specifications well. This has been placed on the eight positions due to its some unique characteristics including clear sound.

The Pro Series DK2 is a rugged, performance-grade workhorse that’ll do just as well on the stage as in the studio. It has a lightweight okoume body—a tonewood that shares many qualities with mahogany—as well as Jackson’s fast maple ‘speed neck,’ a compound radius ebony fretboard and 24 jumbo frets. A recessed Floyd Rose 1000 double-locking trem system completes the shred-friendly features on the guitar.
In addition to the Valvetronix, Vox has developed a line of analogue effects pedals. Dubbed Cooltron, the line provides guitarists with vintage sounding overdrive, compression, boost, distortion and tremolo. The pedals use low-power 12AU7 tubes to create vintage soft-clipping preamplification. Two of the Cooltron pedals, the Big Ben Overdrive and the Bulldog Distortion, won the Guitar World magazine Platinum Award.[3] Cooltron pedals:
There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings. For a six-string guitar in standard tuning, it may be necessary to drop or omit one or more tones from the chord; this is typically the root or fifth. The layout of notes on the fretboard in standard tuning often forces guitarists to permute the tonal order of notes in a chord.
We’ve already shown you how you will sometimes want more than one mic on your amp to achieve ideal sound in your tracks. Many semi-distant and ambient techniques will be most useful, along with a close mic, but on a separate track, to retain the option of blending a more-direct tone to create your overall sonic picture. Any single-mic positions discussed thus far can be combined into multi-mic sounds in the mix when recorded to different tracks. There are also several other approaches to multi-miking that might come in handy now and then, and which are worth some exploration.
With over 100 effects, there's really no shortage of virtual stompboxes to play with, while the unit's complex signal routing capabilities allow for a wide variety of effects combination. Add to this Helix' acclaimed amp modeling features, which lets you mix and match 62 amp, 37 cabs and 16 mics. If that's not enough, you can also make adjustments to the amp models to better personalize your sound. To match its complexity, Line 6 designed the interface to be simple yet intuitive, courtesy of its color LCD display and colored LED rings.
Much like ESP, Schecter started out as a parts company which decided to start building their own guitars. Right from day one it was apparent that their mission was to deliver ultimate metal guitars. Everything from their design, to the choice of electronics pointed in this direction. It didn’t take long for Schecter to become one of the go to brands that has reached the elite level.
Description: Body: Alder - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 3+3 - Bridge: Fulcrum Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Duncan Designed - Pickup Configuration: S-S-S - String Instrument Finish: Transparent Colors
Since guitar players are automatically cool, that means cool guitar players are the coolest of the cool. In this issue, we exalt this elite class of cold—the players who even we would sell our wives and first born just to have some of their mojo rub off on us. Some of them are pioneers who paved a bold, daring path to define new styles of cool, while others are simply the kind of guitarists we want to be when we never grow up (which is part of being cool).
Hello all. I have a brand name guitar, which was very popular in the 1980s, and still is being manufactured under Gibson today. I didn't see it in your list though. It's a Kramer Stagemaster. It's a beautiful guitar, which I may never part with. Strat-Style with Neck-Thru-Body & Floyd Rose Trem. The headstock states Kramer American. These were passed off as American made models, however I understand that they were actually made in Japan. The style and appointments are strikingly similar to my Ibanez Proline 2550 from the same era, which has 'Crafted in Japan' written on the headstock. I know that Kramer made a lot of American made guitars out of Neptune, New Jersey, however these were all bolt-on neck guitars. Does anyone know where these Neck-Thru Kramers were made, or why they have American printed on the headstock if they are not tues American made guitars?
Do you have an old guitar that requires knowing how to repair a damaged guitar body? Read on and learn some neat tricks for repairing body damage on a guitar. Body damage on a guitar ruins the acoustics. Body damage on a guitar body really make it useless in the playing arena. If you are looking to bust out that old guitar but need some handy advice on how to repair some old damage, MadeMan has the fixes for you. This article will give you the fixes for larger damage and the annoying little nicks and teach you the way to repair them.
Joe is a musician, engineer, and producer in NYC. Over the years, as a small studio operator and freelance engineer, he's made recordings of all types from music & album production to v/o & post. He's also taught all aspects of recording and music technology at several NY audio schools, and has been writing articles for Recording magaz... Read More
Italiano: Leggere Tablature per Chitarra, Español: leer los acordes de una guitarra, Deutsch: Gitarren Tabs lesen, Português: Ler Tablaturas de Guitarra, Français: lire une tablature de guitare, Русский: читать гитарную табулатуру, Nederlands: Gitaartabs leren lezen en spelen, Bahasa Indonesia: Membaca Tab Gitar, 中文: 看懂吉他谱, العربية: قراءة تابات الجيتار
The only known American distributor of Lyle guitars is the L.D. Heater Music Company. A small warehouse based in Beaverton, Oregon, L.D. Heater was owned by Norlin, the parent company of Gibson, and known more for their exclusive production rights to Alembic instruments. As protection from potential lawsuits, Lyle guitars were part of the contract that stated under which brand names Gibson-licensed guitars could be produced and distributed.

The USA-made variants of Jackson guitars are somewhat pricey, yet they are also custom-made. However, you can also find the same options bearing affordable price tags too. These inexpensive models come with slightly downgraded specs as they aim at the beginners and intermediate level guitarists. It means Jackson guitars provide an excellent opportunity to the metal players to choose any of the guitars that fit in their budget and meet their requirements.


8dio sampled a 200-year-old Italian made mandolin to create a gorgeous sounding VST that simply rules, and will fool even the most well-trained ears into thinking it’s the real deal.  Like with the others in the series, we have our usual clean legato, artifacts, effects, tremolos, mutes — basically, you have everything you need to get the job done 99% of the time.
WOW! This thing is incredible. One of the nicest instruments we have ever played and we've had, played and sold a few hundred over the past 20 years! Can't say enough about this bass. It's a pre-owned Zon Legacy Elite series 5-string model featuring a beautiful book-matched solid Bubinga wood top over a solid Mahogany wood body. A solid graphite neck / fingerboard utilizing a sculpted body neck joint finishes off the basic construction of the instrument. Huge tone is delivered via 2 active Bartolini pickups that feature controls for volume, bass, midrange, treble and balance. This bass has had the electronics modified by Zon to move the midrange control from the access hole in the back cover to a matching pot located in the control section on the front of the bass. While at Zon to get the custom electronics installed,  the original owner had new frets and a new finish coat added. Figured as long as it was there "what the heck". Tuning is accomplished via the 5 German made Schaller tuning machines in the same gold plate finish as the solid cast bridge. The solid graphite neck features a full 2 octave neck with 24 frets and a 34" long scale. This bass is a dream to play! Just about as good as it gets. There's not a mark on it anywhere. It looks brand new! Rock solid and stays in tune. Set up perfectly! Includes original Zon Soft exterior hard shell case on black Cordura.
Fuzz pedals take distortion, and further distort the tone resulting in a sound that can really only be described as fuzz. This effect was originally achieved by accident, often due to broken speakers or electrical components in a guitar amp. Many contemporary blues-rock guitarists continue to use this effect due to its in-your-face tone. A fuzz effect can also be heard in Jimi Hendrix’s rendition of the “Star Spangled Banner.”

Here’s a fairly comprehensive listing of all Supro guitars and amplifiers. As always, treat the dates with a certain flexibility, but these (for a change) should be pretty close to accurate. In some cases – e.g., the Clipper/Supreme Hawaiian, where the fundamental model stayed the same – they are listed in consecutive order following the original entry to emphasize the continuity. Also, certain salient details are included in parentheses, especially where these can help distinguish model changes. I’ve made no attempt to be comprehensive on these details.

If you really want your guitar strings to stand out as well as your playing does, then these colourful options from DR are a novel eye-catcher. For even more fun, stick them under a UV light and they’ll glow, too! They might also serve a practical purpose for beginners, too, as new guitarists can quickly identify specific strings based on their colour.
Before diving in, it’s also worth mentioning the “crap in, crap out” rule, which dictates that any recorded track is only going to sound as good as the guitar and amp that it captures, however good your mic or skilled your engineering. You can’t expect elevated studio technique to convert junk tone or a mediocre performance to stellar sounds in the mix; the best you can hope for is to accurately capture the sound being made by your amp, and to do so with optimum depth, dynamics, and fidelity. Of course, it’s possible that the crappy, low-grade junk tone you capture from a scuzzball rig is exactly what the recording demanded (Jack White or Dan Auerbach, anyone?), but it will usually benefit the tune to capture it as powerfully as you can!
The first electric instrument amplifiers were not designed for use with electric guitars. The earliest examples were portable PA systems, which appeared in the early 1930s when the introduction of electrolytic capacitors and rectifier tubes allowed the production of economical built-in power supplies that could be plugged into wall sockets, instead of heavy multiple battery packs, since rechargeable batteries would not become lightweight until many decades later. While guitar amplifiers from the beginning were used to amplify acoustic guitar, electronic amplification of guitar was first widely popularized by the 1930s and 1940s craze for Hawaiian music, which extensively employed the amplified lap steel Hawaiian guitar.[2]
{ "thumbImageID": "4003-Bass-Midnight-Blue/513600000089000", "defaultDisplayName": "Rickenbacker 4003 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Blue", "sku": "sku:site51274034491813", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Midnight-Blue-1274034491813.gc", "skuImageId": "4003-Bass-Midnight-Blue/513600000089000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Midnight-Blue/513600000089000-00-60x60.jpg", "imgAlt": "" } , { "name": "Jetglo", "sku": "sku:site51274034491793", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Jetglo-1274034491793.gc", "skuImageId": "4003-Bass-Jetglo/000000107918146", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Jetglo/000000107918146-00-60x60.jpg", "imgAlt": "" } , { "name": "Mapleglo", "sku": "sku:site51274034491783", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Mapleglo-1274034491783.gc", "skuImageId": "4003-Bass-Mapleglo/000000107918138", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Mapleglo/000000107918138-00-60x60.jpg", "imgAlt": "" } , { "name": "Fireglo", "sku": "sku:site51274034491780", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Fireglo-1274034491780.gc", "skuImageId": "4003-Bass-Fireglo/000000107918062", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Fireglo/000000107918062-00-60x60.jpg", "imgAlt": "" } ] }

How are acoustic guitars and electric guitars different? Several ways. Most notably, acoustics don’t need to be plugged in to be heard. Acoustic guitars are generally larger and have a hollow sound chamber. This sound chamber "magnifies" the resonance of the guitar’s wooden top and body as you pluck or strum the strings. The bridge helps transmit the strings’ vibrations to the body.

When in doubt, reach for the Dummies guide. These standardized, annotated guides have taught countless people to do countless things that were once over their respective heads. Like the Hal Leonard complete guide above, this massive, 648 page door stop includes six different sub-books, including three basics volumes and three genre-specific guides. It’s the everything-to-everyone approach. It might be overwhelming, but at least you’ll have everything you need in one place.
My purpose for the visits were neither to buy, nor to have repaired, an instrument. It was to have the proprietor take a look at the bass that I had build. To give me his opinion and estimation on how I did. He walked through the process I'd used, for defretting, paint stripping, and then staining and poly sealing. Demonstrated how to adjust the truss rod, and complimented me on the work I'd done.
Why We Liked It - The price on amazon is undoubtedly pretty high, which means that this Gibson is going to be for serious players and professionals only. You'll need to make sure you have gig bags or a guitar case in hand for protection! However, if you’re looking for the absolute best that the electric acoustic market has to offer right now, then there probably aren’t many contenders to the J-200’s crown.
Three recording sessions between 1936 and 1937 produced 29 songs, including the verifiable classics “(I Believe I’ll) Dust My Broom,” “Sweet Home Chicago,’” “Walkin’ Blues,” “Love in Vain” and “Crossroad Blues.” His popularization of cut boogie patterns presaged electric Chicago blues and rock and roll, while his fretted and slide guitar licks are so timeless that they still show up in contemporary music.

and i dont know how the new ones are, but the only ones, though called AD3000, they weren't like the other 3000 series guitars Agile offered. back then, they came with maple necks. they also came with 3 or 4 piece bodies, while AL3000/3100 etc came with 2. this came with a matching headstock, which only the 4000 series offered....so its almost as if the AD3000 was a missing link between the different series of guitars....
Three acoustic guitars were offered in 1971. These were glued-neck models with roughly Martin-shaped heads and pickguards slightly larger and squarer than a Martin. All had spruce tops (presumably plywood), mahogany bodies and necks, rosewood fingerboards and dot inlays. These appear to be Japanese, not Brazilian Gianninis. The bridges are glued on, with screw-adjustable saddles and pins. The U3012 Auditorium was a Spanish-shaped steel-string and cost $89.50 plus the cost of a case. The U3013 Grand Auditorium was a dreadnought costing $105. The U3014 Twelve String cost $120.
Description: Body: Koa - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Rosewood - Binding: White Sparkle - Frets: 22, Jumbo, Medium - Inlay: Thumbnail - # of Strings: 6 - Scale Length: 24.6" (62.5cm) - Headstock: 3+3 - Bridge: Rocking Bar - Bridge Construction: Ebony - Cutaway: Single - Hardware: Grover Romantics Tuners, 3x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: FilterTron - Pickup Configuration: H-H - String Instrument Finish: Flamed Koa
For the last tip/technique, I’m going to shift gears and talk about recording acoustic—upright—bass. This may seem more daunting, but many of the same techniques apply—I’ll mention a few quick items that would be specific to the big box. While the dynamic mics I mentioned above might work fine (especially on stage), a good large-diaphragm condenser would be appropriate in the studio, to capture the high end and air of the acoustic instrument as well as the lows. On stage, the relatively low acoustic volume of the instrument may preclude more distant mic positioning, but you can wedge a small (pencil-type) mic into the bridge, with appropriate foam padding, and this, surprisingly, can often provide excellent sound and much better isolation. 

Examples of these first Supros can be seen in two catalogs from 1936, by Canadian distributor Peate and the Bronson Music & Sales Corporation, the latter probably originating slightly later than the Peate book. Both show laps identical to the Supro frying pan. Peate offered the Spanish guitar and mandolin. In the Bronson catalog, the Supro frying pan is known as the Bronson Singing Electric “For The Artist.” Bronson also sold electric Spanish and tenor guitars and an electric mandolin, other early Supro electrics.

But it would be a mistake to think that this guitar is only suitable for Jason Mraz strumming and happy songs, because it’s just as good for heavy metal! That sweet little tone can easily be transferred to heavy music, or why not pop, jazz or blues? In other words, this guitar is extremely versatile and is the best option for musicians who play many different types of music and want a guitar that works well for pretty much everything.
Sparkle works best in the background and will be more suited to non-guitar players that want quality sounding guitar rhythms, but not have them be the focus or overly complicated.  Most guitarists will find it too rigid and write it off, where non-guitarist will want to spend a decent amount of time mastering the expression options. The GUI is geared to key players, but it’s simply fantastic looking, clean, and easy to use even if you can’t play keys that well.
The first guitar developed was the K1 Series. Launched in 2000, this instrument had a dreadnought cutaway design and used inexpensive materials such as laminated spruce for tops, and sapele for back and sides. Kona Guitars then launched the K2 series after which it diversified, at present offering over 30 models of guitars, ukuleles, violins, and other instruments.
Besides his restoration of vintage guitars, one of the most important contributions Paul has made to the guitar world is passing the torch to a new generation of guitar masters by offering Luthier classes that teaches how to build your own electric guitar at his shop. People from all walks of life have attended his seminars, including Mark Colombo, a former offensive tackle of the Dallas Cowboys. Paul is not only sharing his love of building great guitars but also teaching the science of how the magic works. "I have what's known as the 'no-fail policy,'" he says and laughs. "If you can't do the work, I'll do it for you."
{"pageName":"[gc] pdp: samick artist series electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","products":";114368474;;;;evar65=Used-Guitars-Samick","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
This has always been one of the most revered brands of guitars amongst professional musicians. They sell one of the most affordable and durable electric guitars. The acoustic and classic guitars sold by this brand are ideal for students and beginners. The dreadnought sized body with cutaway has a Sitka spruce top with nato back & sides. The neck has 20 frets & dot inlays on the fretboard and made of nato. The bridge and fingerboard are made of rosewood. Yamaha’s own System55T. The starting price of a Yamaha acoustic 6-string guitar is 6990 INR.approximately.

For beginners looking to practice their first notes, chords and songs, nothing more than a couple of watts is needed – in fact, most dedicated practice amps won’t offer much more than 10 watts. If you are planning on jamming with a full band or starting to gig in small venues (think bars, clubs and small halls), then anything from 15 to 50 watts will suffice. Bigger gigs, including auditoriums and outdoor festivals, will demand upwards of 100 watts.
Since National had applied for a patent on the single cone (US patent #1,808,756), Dopyera had to develop an alternative design. He did this by inverting the cone so that, rather than having the strings rest on the apex of the cone as the National method did, they rested on a cast aluminum spider that had eight legs sitting on the perimeter of the downward-pointing cone (US patent #1,896,484).

Gruhn Guitars: If you're looking for a convenient appraisal that can be done online--something along the lines of what May Music Studio used to do--Gruhn Guitars offers an appraisal service. You must first send information and pictures of your guitar according to their guidelines. You must also include a payment for the appraisal fee, which varies depending on the instrument.
It's always hard to rate amps when mixing high gain with vintage, boutique amps and the mass produced monsters, but including S.S. and digital technology seems to be a unrealistic stretch. That being said, this manufacturer is making some of the best sounding vintage type tube amps I've heard to date. their lineup of vintage Fender style amps are all excellent, and considerably more affordable and reliable. If you are a fan of the tweed, black and silver faced gems, you have to give Victoria a try. If you prefer something with a unique spin they make their own unique creations as well and they are all serious tone machines. In so far as tube amps go, these guys are definitely in my top five. Speaking of boutique, where is Carr?

Anyone who has a Tempest XII probably needs a pick guard. I have a 1966 which was in the case for much of the past forty years. The plastic apparently dried out and "shrunk," causing the two corners to pop off at the screws near the neck. Some guitar repair technicians are good at fabricating pick guards, but most are either woodcrafters or electronics geeks. Please advise how your search has gone. Maybe I'll replace mine, too. RED


A friend owns a music store and looked up the "Norma" brand. It said- Norma guitars were manufactured in Japan between 1966 and 1972 by the Japanese to compete with the Gibson HummingBird. The look is almost identical (Check out the Gibson Hummingbird played by Jonathan "BuggieMan" Long from Baton Rouge La. His looks exactly like my Norma. I too was curious for thirty years about my good sounding guitar. Looks aint everything!
But that's not the Ibanez we know today, although the two are related.. Japanese company Hoshino Gakki began importing guitars made by Salvador Ibáñez's company to Japan in 1929. This was so successful for them that they started producing their own similar guitars under this name in 1935. They started making modern guitars simply using the name Ibanez in 1957 and then, not being ones to hold a grudge given that the US Army Air Force destroyed their factory in 1945, began exporting them to the USA in 1971, and as they say, the rest is history.
Boost/volume pedal: A boost or "clean boost" pedal amplifies the volume of an instrument by increasing the amplitude of its audio signal. These units are generally used for "boosting" volume during solos and preventing signal loss in long "effects chains". A guitarist switching from rhythm guitar to lead guitar for a guitar solo may use a boost to increase the volume of his or her solo.[59]
Promotion lasts for 1 year from date of purchase. After that period, your voucher is redeemable for the amount you paid, less any value you may have received. Not valid as payment for Eat24 purchases. Not valid with other vouchers, certificates, or offers. Only 1 voucher(s) can be purchased and redeemed per person. Cannot be purchased as a gift. Subject to the General Terms. Learn more View more
With that in mind, the quality of said effect is satisfactory, to say the least. You maybe won’t see the same level of refinement as you would in some stand-alone models, however its reverb comes across as fairly organic. On top of that, you are presented with several decent options. All of that aside, the real value of this Zoom comes from its ability to combine up to 6 effects at any given time.
In the late 70’s digital technology boomed and made its way into the guitar community. It first entered in the form as rack units which were expensive and relatively large. As costs came down and the technology shrank, digital delay pedals were introduced into the market by Boss in 1984 with the Boss DD-2. Since then as technology advanced, delay pedals now offer many features in a very small box such as tape echo, analog, reverse delay, modulated delay, and loopers.

For the metalheads, Ibanez has their Iron Label series in addition to the signature models. These guitars are absolutely metal-oriented, with no-nonsense designs that provide exactly what you need for intense shredding without gimmicks. Ibanez Iron Label guitars are based on the S and RG platforms and come in 6, 7 and 8-string varieties, all with fast, shreddable necks. The RG models even have an onboard kill switch so you can do manual strobe effects without the need for a pedal.

It's interesting how one of the biggest brands in guitar amplification was built by a drummer! The story goes that professional drummer Jim Marshall was inspired by Pete Townshend, Ritchie Blackmore, and Big Jim Sullivan to develop a louder and better sounding amp. And he went about it by looking at a popular American amp design (i.e. Fender Bassman) and finding ways of how to improve it. After many prototypes, Jim and his team eventually came up with an amp that had their own "Marshall sound", this amp inherited the JTM label, an abbreviation of Jim's and his son Terry's names. The rest as they say is history, with Marshall being one of the most familiar amplifier brands, even to none musicians. Their brand is still the amp of choice for a long list of virtuoso guitarists, including Jimi Hendrix, Jeff Beck, Eric Clapton, Jimmy Page, Slash just to name a few. While their vintage and professional level amplifiers are still very much in demand, the company is not doing as great in the entry level to mid-tier market - which really is the bulk of where sales and reviews of come from. Still, their fans gave them enough good feedback to make it to this list, thanks to the improvements they are making to their entry level line of amps.
Overdrive – A dynamic effect that sounds like your guitar tone is being played through an amp breaking up. Overdrives are more subtle than distortion effects. To achieve the original overdrive effect, a valve or vacuum tube amplifier would be “overdriven” by increasing the gain to the limits of the tubes. At this point, the vacuum tube can’t handle the voltage, starts “breaking up”, and adding extra overtones to the signal giving the sound distortion.

There are quite a few types of guitar shapes, with the most popular one being the dreadnought. However, contrary to acoustic guitars, many acoustic-electric variants come with some form of cutaway for better access to the higher frets. This can really come in handy for a wide range of techniques so you don’t have to play with your hand over the body, which can be uncomfortable.
Recent amplifiers may include digital technology similar to effects pedals, up to the ability to model or emulate a variety of classic amplifiers. Some modeling systems also emulate the tonal characteristics of different speaker configurations, cabinets, and microphones. Nearly all amp and speaker cabinet modeling is done digitally, using computer techniques (e.g., Digital Signal Processing or DSP circuitry and software).
×