For visual clarity, I’ve indicated ground connections with a down-facing triangle. As you probably know, all ground wires must be electronically connected to each other. (One convenient method is to solder all pickup ground wires, the output jack ground, the pickup selector ground, and the bridge’s ground wire to the back of the volume pot, and then run a jumper wire to ground the treble control. In conventional wiring, all pots must be grounded, but here, it’s not necessary to ground the bass pot.)

This general tip applies to all so-called temporal effects. Anything that messes with the timing of the signal should come last. If you were to put reverb before distortion, which is often one of the first effects in a chain, that distortion would be applied to both the original signal and all of the echoes. In other words, you’d get a mess. Naturally, this isn’t a rule written in stone. There are always exceptions. However, it is best to start with reverb at the end as this is the most neutral position.
I got this guitar just a couple months ago, not knowing much about guitars and not really knowing much about quality or anything I did a lot of research about what would be the best purchase for the right price for a beginner guitarist.. and I stumbled upon the Yamaha FG700, Fantastic reviews and ratings for beginners with great overall quality and overall sound, especially for the cost. I did a bit more research, comparing instruments and what not just to be sure I didn't purchase something that was made out of cardboard and shoe strings when I stumbled upon the Yamaha FG800, which was said to be the upgrade of the 700. I did some reading and though it didn't have as many reviews it was said to have improved sound and durability for the exact same price. Knowing that Yamaha has pretty much always been rather good quality
So you decided to play electric guitar. Once you get a guitar and an amp, the next step is to explore effects. Effects pedals can be separated into groups based on their functions. Understanding the different pedal groups is the key to getting the best sound when chaining them together. The largest pedal group is probably overdrives and distortions, and BOSS currently makes 16 different pedals in this category.
In SPIN’s May/June “Loud Issue,” Paul Saulnier, frontman for squawking indie-punx PS I Love You, mused, “I’m getting comfortable with self-indulgence.” Hopefully, not too comfortable: Saulnier’s yelping guitar-driven blurts cast him as a Clark Kent too shy to ever fully embrace his Superman side. Endearingly knock-kneed riffs lurch along with their heads down before briefly unbuttoning their shirts to reveal the brawny licks underneath. Virtuosity is rarely so endearingly bashful.

Instruments with built-in effects include Hammond organs, electronic organs, electronic pianos and digital synthesizers.[19] Built-in effects for keyboard typically include reverb, chorus and, for Hammond organ, vibrato. Many "clonewheel organs” include an overdrive effect. Occasionally, acoustic-electric and electric guitars will have built-in effects, such as a preamp or equalizer.[20][21]

Modelling/digital amps: This type of guitar amp uses digital technology to stimulate old-fashioned technology. They are able to emulate old amplifiers using software, and this feature enables them to combine several amps into one. Their programmable nature enables the user to switch digital effects such as the chorus, delay, and other features. Some models of these amps have a digital or analog output that goes directly to a recording or PA system through speaker simulation.

{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: kingston","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Buying an electric guitar is a very personal process, with many things to consider before you make your final choice. It’s not just a case of picking something with a nice color – you are usually parting with a substantial chunk of hard-earned cash, ranging anywhere from $100 to $2000 – or more – for some guitars, and therefore patience is required to find something that really suits you.
I played electric guitar in a band from the age of 12 through to the age of 36, then gave it up. Now, at the age of 68 I want to get back into playing. I went into a store and tried playing and found that my fingertips really hurt! Are there any electric guitars where the metal strings don’t hurt or do I just need to “grin and bare it” until my fingertips get calloused again?
Let’s start off with a real classic for a classic player! This Fenders vintage modified style Strat hss has captured the happy way of the 50’s, available in Surf Green, Daphne Blue and Fiesta Red and it’s a guitar that just makes your life a litter bit more worth living. The design is very much like the 1950’s electric guitars, from the soft V-shaped neck, maple fretboard and 8-hole pickguard down to the smaller things, like the knobs and the switch tip- everything just brings us back!
Here we SOLD OUT: a real nice vintage 1986 Japanese crafted Ibanez LS-300 this is a unique classic series of hand built quality guitars made for a short era in limited quantities is a wonderful example of very good Japanese quality workmanship that were built with good quality materials these have stood the test of time ... post lawsuit era. This full size Dred has a classic sound and has quite nice articulate tone notes ring true & clear. This Mahogany neck is quite nice it has good and low finger play Action and has room to go either way with truss rod not maxed out at all , room to adjust to taste either way...body back & sides are also mahogany with some slight buckle mars on back but not to came in with fingerboard grime and a broken nut and old rotten strings so we started from scratch & cleaned & re-hydrated the woods especially the rosewood fingerboard was soaked and cleaned with lemon oil I just polished the frets most are showing little to no where and a few lower frets were polished down further leaving only slight signs of past play not taking hardly any off vintage frets and left its original integrity in tact, NECK WIDTH IS its 1-11/16ths nut width medium slim profile neck is very good its easy to play set up nicely...I did replace its nut with a compensated Martin bone nut and installed new strings....while doing this observing closely its overall condition to be excellent ....its top is nice and flat its made of beautiful straight grained Sitka spruce with some nice visible bear claw figure to it the Spruce is Solid it is center seamed 2 - piece, bridge is flat too with no cracks...x bracing is also cracks or separations, neck is straight to this day this is a great player folks...this tone is great for recording. Its noticeably fast pro feeling neck makes this one a pleasure to play. These pics were before new strings and clean & set up with new martin bone nut its even more beautiful now. any questions let me know thanks for your interest Joe, You can email me at:
When it comes to combo amps, the speakers included will usually give you a good idea of what to expect in terms of power and performance. While bass amps are in a category of their own, guitar combos tend to use speakers of anywhere between 3″ right up to 15″. Obviously, the bigger the speaker, the better suited it is for the stage, while having more than one is an instant upgrade to the power available.
Why We Liked It - Even if this isn’t the cheapest guitar on our list, we think the Schecter Hellraiser is the best bargain! To get this much guitar for so little money is almost incomprehensible and we feel like a million bucks when we play it! It not only looks good, it sounds fantastic, and you can be sure to impress everyone who hears you play with this wonderful instrument!

The Strat didn’t just sound different, its aesthetics and ergonomics were totally unique and innovative for its time. Instead of a standard slab body, the Stratocaster had double cutaways and was contoured in a way that had never been seen on a solid-body guitar. Originally built for legendary western-swing musician Bill Carson, it was quickly adopted by rock ’n’ roll pioneers like Buddy Holly and Hank Marvin, and has been the tone behind countless Top 40 hits.
The Sex Pistols, Steve Jones' brutish power chords and flamboyant gutter-glam solos were a perfect mirror for the taunting bile of Johnny Rotten – and a yardstick for every punk-rock noise-maker that followed. His legacy was set with indelible riffs on one record – 1977's Never Mind the Bollocks… – that inspired guitarists from Slash to Billie Joe Armstrong. It was an attitude as much as a sound. As Jones told a journalist during his days with the Sex Pistols, "Actually, we're not into music. We're into chaos."
The Seismic Audio SADIYG-15 JEM Style Electric Guitar Kit gives you the ultimate shredder guitar. Originally designed by Steve Vai, this style is built for speed. Innovative features like a Monkey Grip Handle and Floyd Rose Tremolo complete the unique design. All the parts needed for a finished guitar are included. This guitar kit is suitable for the aspiring or established luthier and all guitar players. A truss rod adjustment hex wrench, two Floyd Rose tremolo adjustment hex wrenches and solder are included. You will need a phillips head screwdriver and a soldering iron to fully assemble the guitar. A pack of six nickel alloy strings and a right-angle guitar cable are also included.With your purchase, you will receive one DIY JEM Style Electric Guitar Kit pictured and described above.
Okay, maybe you’re not so ambitious and simply want to bash out a decent tune around a campfire. That’s fine — just be warned that doing any John Denver stuff hasn’t been considered cool for a long time. If you are guitar beginner with a guitar in hand already then I may suggest you check out: 10 Amazing Tips to Learn How to Play the Guitar with Good Technique.

One of the most important Telecaster players was Clarence White, who, during his short career, contributed more to country electric guitar than almost anyone else, along with being a phenomenal bluegrass flatpicking guitarist and a pioneer of thecountry rock genre. He played with the Byrds, and Nashville West along with the bluegrass bands the Kentucky Colonels andMuleskinner. He enlisted the help of Gene Parsons and invented the StringBender, a device inside the body of the guitar that raises a string’s (either the B- or G-string most of the time) pitch when pressure is applied to the strap. His Telecaster is one of the most recognizable and is now owned by Marty Stuart.

From the 1860s on, fan bracing became standard in Europe. Martin and other American builders including Washburn and others since forgotten (Schmidt & Maul, Stumcke, Tilton) used X-bracing instead.[3] The sound of X-bracing may be considered less delicate with gut strings, but it prepared the American guitar for steel strings, which emerged in the first quarter of the 20th century.
If you’re reading this guide, you probably need help purchasing a first acoustic guitar or electric guitar for yourself, a friend or a child. We're here to help you understand the key specifications and features to look out for. We'll explain the differences between acoustic, acoustic-electric and electric guitars. We'll also recommended six of our best beginner guitars and two beginner guitar value packs. 
The book provides examples of simple mathematical models for the complete signal chain consisting of the electric guitar and related accessories. Several do-it-yourself books have been written with the emphasis only on building a pre-specified circuit according to step-by-step instructions. This book takes one step further and brings up the designer perspective on guitar electronics. The importance of mathematics as a tool for design and analysis is emphasised throughout the text. Often in similar publications the use of mathematics is avoided as much as possible, but the fact is that mathematics provides ways to analyse circuits before spending time and money on random prototype builds. For more information on the contents of the book, check out the table of contents and the Google Books preview
The E-18 and EM-18 were basically the same guitar differing only in electronics. The E-18 featured two DiMarzio humbucking pickups, a DiMarzio PAF at the neck and a DiMarzio Super Distortion at the bridge. In addition to the regular controls, the E-18 had mini-toggle phase switch. Production of the E-18 began in April of ’79 and about 5,307 (about 1,320 a year) were made until the guitar ended in early 1982.
Personally, I chose the Everlast version of Folsom Prison Blues because I find that the Everlast cover is so much more fun to play along with. The Everlast version is a little bit faster to play along with, but I think of a twelve bar blues while I’m doing the chord progression with this song; it really helps me to keep up and maintain a steady tempo.

This JEM is an entry level version of the 7V we mentioned earlier. While it doesn’t have the same range as the guitar it was inspired by, Ibanez JEMJRWH still brings you a good portion of Steve Vai’s core tone. In a lot of ways, it’s a great substitute for those who are on a tight budget. I compared the two and the playability was almost on the same level.

Orange make great amplifier cabinets that work with a wide variety of heads. In fact, there are many artists out there who like to mix and match their amp+head combinations to get the specific sound out of their head combined with the classic sound of an Orange speaker cab. The Orange PPC212 Guitar Speaker Cabinet - 2x12 has been designed to bring the best out in your Orange amp head by utilising 13 ply, high density 18mm Baltic Birch plywood in a closed back construction partnered with 2 x celestion vintage 30 speakers. This Power Projection Cabinet (PPC) has been designed to last the test of time thanks to the rugged construction.
Despite the numerous different analog devices, it is very rare for them to be able to duplicate all aspects of a Leslie speaker. Thus, Rotary Speaker Simulator are always going to be digital, utilizing modelling algorithms to model the relations between the rotating horns and bass baffle. And how the sound bounce around the cabinet. As Leslie also have an amplifier section, most of these typically have overdrives to simulate that aspect. Some of these pedals can even accept keyboard's input.
Bottom Line: The Zoom G3X is everything a guitar multi-effects pedal should be, and then some. As strange as it sounds, as we researched what owners of this pedal are saying about it, it was difficult to find any outright negative comments (any negative feedback tends to be centered around the notion that digital multi-fx don’t sound as good as individual pedals, which is a hotly debated topic). You have to consider how amazingly low the G3X price tag is versus how many features it packs in. It’s not the best in the world at any one thing - the looper isn’t as good as a TC Electronic Ditto, and the delays might not match up to a Strymon - but it does a lot of things quite well, and the user interface is such a pleasure to use. The Zoom G3X will be your best friend if:
Flexibility of the BOSS Katana-50 goes way beyond expectations for establishing a different path referencing to its predecessor the Roland type of practice amps. With 50 watts of power and a custom 12-inch speaker, the Katana-50 can deliver a commanding range of sound playing it clean, crunch, lead, and brown for electric and acoustic electric guitars. Moving on to other controls on the panel, it features customizable effects by using BOSS Tone Studio editor software and for adjusting sounds quickly, it has a dedicated gain, EQ, and effects controls. Tone setting memory is also included for storing and recalling all amp and effect settings.
Item Weight 9.6 ounces Product Dimensions 2.5 x 2.8 x 4.2 inches True Bypass Footswitch Zinc Alloy Outer Cover Transparent top knob and 2 cool small black knobs Psychedelic music uses the imagination to filter how we understand this strange ad beautiful world we live in: through melody and noise, with echoes and ambience, with peace and love. The TAPE EKO is a smart echo pedal that embodies the soul of the classic tape echo sound. It provides three delay modes: Mode I, Mode II, and reverse mode. Mode I gives you all the advantages of a digital delay. Compared with other tape echo effects, this mode produces a brighter, cleaner tone with less noise, all without sacrificing warmth or dynamics. Mode II differs from Mode I in terms of dynamics.

Microphonic Pickups: Generally this is more of a problem with covered humbuckers, and more often than not it is caused by vibration of the cover itself. The easiest way to determine if this is the cause is to remove the cover. Typically there are two solder points which need to be de-soldered. If the microphonic condition goes away, you have four options. The first is to leave the cover off. This will affect the tone if the metal cover is magnetic, otherwise it will not. However, the cover does provide protection for the pickup and I'd advise leaving it, the pickup was designed to have a cover. Second is to have the pickup wax potted, this involves setting up a wax pot, and there is risk of damage to the pickup. Third is to apply a layer of silicoln inside the cover and seat the pickup in the cover before it dries making sure not to push it all out, but getting it up around the sides of the pickup. This is safe, easy and effective, but makes a mess of the pickup for future repair. (not a big concern IMO) The fourth option is to do a partial wax potting. Get some parafin from the grocery store. Boil a small pan of water then remove it from the heat. Place a chunk of wax in the cover press the wax into the holes to prevent water getting into the cover, and hold the cover on the surface of the water with a pair of tongs.As the wax softens spread it around and up the sides with a spoon. Resoften the wax until you can easily seat the pickup in the cover. This is much safer and easier than true wax potting.
This type of chip delivers a beautifully coloured representation of your sound. It may not be the most accurate and you are limited in the number of repeats and delay time.These are not to be confused with Tape Echo which was used for a long time in the world’s largest studios. No, these pedals were made out of necessity to take a form of delay on the road easily.
If you’re looking for a unique sound that delivers an exaggerated twang, than the Gretsch G5422TDC Electromatic is the best electric guitar to offer these features. Designed with wider frame and a hollow body, this guitar utilizes “Black Top” Filter’Tron pickups to deliver a dynamic sound that is both bright and focused in its tone. The toggle has three positions that allows the user to customize the balance of the tone, and all strings on the guitar are able to deliver strong intonation due to the Adjusto-Matic bridge. The vibrato tailpiece adds resonance and depth to the sound quality, and by utilizing maple for the body frame there is a clarity provided within the tone that is unique to that design. With a three position pickup, open-back tuners, and a rosewood fingerboard, this retro style guitar provides a high-quality option for musicians alike. Here’s a great G5422TDC video for some samples of that warm hollow-body sound.
I won't lie, I was VERY skeptical ordering this. But I figured that isfits not great, I could sell it. After getting it, this package is amazing for the money. I am definitely keeping it! I own/have owned $5,000+ models and some $100 "disposable" axes and I was shocked at this beautiful guitar. First off, the flamed top is gorgeous. It doesn't have a cheap look to it. The fret board is so so but you cant expect too much here. The frets don't have sharp edges and nicely done. The sealed tuners are smooth and after a minute of the inital tuning (with the included chromatic tuner), I played it for a few hours and it kept proper tune. The overall tone of the guitar is warm and projects well. I got absolutely no rattle or vibration. Then I plugged into the included amp. I will admit, the amp isn't great but but its a free practice amp. So I plugged into my Peavey and sounds awesome. It also came with a so so gig bag, few picks, a strap, a truss rod key, sorta cheap guitar cord, an extra set of strings, and batteries for both the tuner and for the preamp on the guitar. Speaking of that, its a 3 band EQ with a gain control, volume and a battery checker. I paid $140 for all of this and I will say that this is one of the best deals I have gotten in almost 37 years of me playing. If you want a good practice guitar and can even play a show, don't pass this one up. The guitar alone is worth 3x of what the whole package costed me. I think I'll check out more Glen Burton guitars.
I first met Ralph Novak in 1980, when he was working at Subway Guitars in Berkeley, California. I'd assembled a kit Strat and it needed a refret. My monstrosity was painted Shell Pink in tribute to Strats from Fender's surf era. Little did I know what was to come of Ralph's distant future. He was the fret guru in Berkeley, and his work was astounding - the best I'd ever seen! Ironically, Vintage Guitar columnist Stephen White was also working at Subway at the time. So began our journey into luthiery madness! Fast forward to 1989.

The Vox Show Room shows the classic amps behind the British Explosion of sound in the 60's. VOX, at one time was one of the largest musical instrument producers in the world and their products were utilized by almost every major music group during the nineteen sixties. From The Shadows to The Beatles to U2, VOX is the "voice" of generations of musicians worldwide.
[author image=”” ]Alan Steward is a Producer, Engineer and Musician with over 30 years experience in the music business. He worked with Grammy winning artists from the Temptations to the Baha Men. His music has been used in TV shows and feature films. He is also well-known as a producer of loops for music production and owns a recording studio in Germany.[/author]
Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.
1947: Open back Grover Sta-tites on 0, 00, 000 models style 21 and lower. These post-WW2 open back Grovers have thin seamed buttons and the pointed baseplates which were never used on the pre-war open back Grovers. Also all the pre-war thin seamed button tuners were 6:1 ratio. The post-war tuners (and the thick-button open Grovers after 1937) were 12:1 ratio This makes post-war open back Grovers more easily identifible. Otherwise the post-war Grovers are direct drop-in replacements for the pre-war versions.
I know a lot of you out there fancy yourself as “tinkerers”, and many of you may actually be quite good at handling repair work to your own instruments, but I’ve always been more of the kind who loves to find a good repair person. Number one, if the repairer doesn’t do the right job, or there are problems with the work they did, they have to own up to it, and make sure it’s done right until you are fully satisfied. Then of course, if they are actually a selected and accredited repair person for a given guitar company, it’s even better to bring them the guitar, rather than trying to take matters into your own hands.
My first recommendation is Epiphone. It is not just one of the best but it is the best guitar brand for beginners who are looking to buy a guitar to learn the ropes. I have included a few recommendations from this brand in this post. If you don’t know which one to buy and you are a beginner then buy one from this brand and you won’t go wrong for sure.

Description: Body: Laminated Maple - Flamed - Top Wood: Laminated Maple - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Ebony - Binding: White - Frets: 22, Jumbo, Medium - Inlay: Pearloid Thumbnail - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Rocking Bar - Cutaway: Double - Hardware: 2x Volume Control, 1x Tone Control, 3-Way Switch, Schaller Tuners - Pickups: FilterTron - Pickup Configuration: Dual - String Instrument Finish: Orange Stain
Body tops are optional. If you're just starting out, you should either skip this option, or choose the veneer top that appeals to you most. We offer veneer tops (paper-thin layer of wood) and cap tops (thick layer of wood). Most people will add a top to their instrument because of the top’s naturally beautiful appearance. Some people will add a top to their guitar because it can affect the overall sound of the instrument, too (only applies to cap tops, not veneers).
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it. Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low! Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone. I was so happy and asked him how much, he said it was easy so he didn't want take any money. But i have him some coffee money and he said it was too much, I said it was for a week and he laughed. My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems. Steve is a hidden gem in the Boston guitar world.
So, here's the story I heard from the guys in this shop, one of whom claims to have met Trev at NAMM. He said Fender (and maybe Gibson?) owe him a bunch of money for custom parts and design fees and whatnot, so he started the Vintage line as a sort of f*** you to them. Don't know if it's true but they're so much like a real tele I could see him getting sued, assuming they're not afraid of him countersuing for unpaid invoices. Who knows, maybe it was all a sales ploy. In any case all the sales pitch I needed was playing one. Plays as nice as my MIM Deluxe for half the price.

Started shopping here when I was just getting my feet wet with the music career, bought a Mexican Humbucker strat and went on from there. Over the next 3 years, after many pedals, amps, and other major gears, I've become a solid local musician. This place has the best service hands down to take care of your gear needs in your career, they find out what you need, let you demo the gear for as long as you want, and never forces you to make a purchase decision. I'm glad I can go to this place for all my gear needs and support, so I can spend most of my time on actual music. The employees are super chill, and you eventually get to know them and the bands they play in after a while. It's a really supportive community for local musicians.

Now that you know a little bit of history behind the electric guitar, let’s dive into some of the different types of electric guitars that you can find at Sam Ash. You may be thinking to yourself, “Why are there so many different types of electric guitars?” The reason is this: each and every type of electric guitar serves a unique purpose and will cater to various types of playing styles and musical genres.