Thinking out loud... what defines electronics then? I've always assumed that the pickups, caps, pots, etc. inside an electric guitar constituted an electronic system. The "guitar's electronics" facilitate a deliberate flow of electrons through a circuit with semi-conductors, etc. Heck, with coils and magnets (and sometimes battery packs), they also provide the electricity that's conducted through the system.
Since National had applied for a patent on the single cone (US patent #1,808,756), Dopyera had to develop an alternative design. He did this by inverting the cone so that, rather than having the strings rest on the apex of the cone as the National method did, they rested on a cast aluminum spider that had eight legs sitting on the perimeter of the downward-pointing cone (US patent #1,896,484).
{"pageName":"[gc] vintage: kay","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Most Humbuckers are wired in anti-phase, where the opposing polarity of the localised magnetic fields cancel each others out at selective points, creating a lower bandwidth region in the high frequency domain. Less bandwidth = lower noise. If done correctly, with carefully designed pickups, it will not affect the tone, but traditionally it did, because Hillbilly wannabe technicians made the things on their knees.
The Les Paul Custom single cutaway was discontinued in 1961 and replaced with the SG (as we know it) designation for “solid guitar”. This model featured a thin 1-5/16″ body and a double cutaway. Confusion abounds to this day over the name Les Paul Custom. Since the single cutaway was discontinued, Gibson transferred the name Les Paul Custom to the new models.
Acoustic guitars vary by type. Some are designed for beginners, while others are customized for professional guitar players. Most of the major acoustic guitar brands are available in a variety of different styles, each designed to best suit a customers' specific playing needs. Ease and sound are certainly big factors to consider when choosing a new acoustic guitar.
The GT-70 was a re-styled two-pickup, single-cutaway recalling the F-55s. The cutaway retained the wide horizontal angle of before, however the upper bass bout received a more graceful treatment, with a slight inward curve as it met the neck at the 16th fret. The controls were the same as before; the elevated pickguard had become a large white affair, the tailpiece was the V-notched Bigsby. Pickups remained our familiar DeArmond humbuckers. Gone were the plastic bridges in favor of metal adjustable finetune variety. Finishes were either burgundy or black. The first prototype serial number was 203803. Around 1,450 of these were made between January of 1966 and October of 1968.
Guitar lessons work best if you're putting your skills together to learn how to play songs. That's why Guitar Tricks has a ton of great song tutorials for when you've mastered the Core Learning System, or if you want to try something new. These easy guitar songs are great, especially if you're a beginner that recently picked up an electric guitar. 

Amps available in ’61 included the large HG-8 (recommended for use with the EG-TW and Harp Guitar), the Amp-75C, Amp-73C, Amp-72A, Amp-72B, Amp-72C, Amp-71A, Amp-71B, Amp-71C, Amp-30, Amp-4C, Amp-15 and Amp-86 bass amp. These came in a varity of shapes, mostly with either a single color covering with a tweed grillcloth, or the two-tone Amp-30 or the two-tone Amp-15 with a cross-shaped grillcloth area. All had the Swan-S logo. These were most likely still all tube amps at this point in time.

The Yamaha Pacifica has long proved a benchmark for quality and specification, and the 112V remains one of the best guitars for beginners. The 112 is far from fancy and simply concentrates on the bare necessities. Yet the construction is of excellent quality. Trust us, if looked after this will be a guitar for life. By design it's an altogether more modern, brighter and lighter take on a hot-rod Strat. But when we say brighter that doesn't mean overly shrill. In fact the bridge humbucker will surprise some, it's beefy without being too mid-range heavy and although the coil-split proves a little bland played clean, with a distortion boost it's a pretty useful gnarly and wiry rhythm voice. It's good to have the choice too when mixed with the middle pickup - switching between the full and split coil here is subtle but, especially with cleaner 'class A' amp voicings, there's enough character difference to be useable. The solo single-coils impress - plenty of percussion and with a little mid-range beef added from the amp these get you to the correct Texas toneland. Neck and middle combined produces a fine modern Strat-like mix - the added brightness will cut through a multi-FX patch nicely.

Our first impression of this guitar was that something must be wrong. Surely this guitar is way more expensive than we thought? We doublechecked and the truth is that it’s just incredible value for money. Both the design and the sound are wonderfully good and we understand why Schecter describe their Schecter Hellraiser guitars as having “raised the bar on sight, sound, quality and affordability”- we totally agree!
NOTE: Due to the nature of electric guitar construction, it is extremely common for these instruments to need fret work to play well. 80% or more of electrics, especially those with bolt-on necks, have high frets in the tongue area that must be addressed in order to play without excess buzzing. This includes most new electric guitars right off the shelf. Please see the section below for fret work pricing.

One of the most popular instruments ever known to the world, the guitar is something truly special. Versatile in its ability to play different genres, and coming in a variety of styles, every guitar has something different to offer, allowing musicians to make their individual instrument truly their own. From highly sought after models, to everyday pick up and play options, the guitars found here were made to accommodate literally every need a guitarist could ever have.
Ken Rosser picked the Spider Classic 15 as his favorite of the amps we tested, saying, “I think the effects on the Line 6 sounded the best. It gives you a nice range of tone options. The clean tones stay clean even at loud volume, which a lot of these can’t do. One caveat is that, when you switch the amp sound, it changes the way all the knobs work, so the sounds can really jump out at you.” Fred Sokolow liked the Line 6 in general, saying, “I could pretty much figure out what to do with it, but I could figure out the Fender more easily.”
Fender has shown the spec sheets of its popular Mexican-built Deluxe Series Roadhouse Stratocaster model some love to create a reboot that comes seriously well appointed. The upgraded model features an alder body and bolt-on maple neck, with the option of maple and rosewood fingerboard, finished with satin polyurethane. Keep sniffing around and you'll find other features like the 'Modern C' neck profile, 22 narrow/tall frets, a contoured neck heel, synthetic bone top nut and a set of locking tuners with vintage-look buttons. While the previous editions of the Roadhouse and came with a 241mm (9.5-inch) fingerboard radius, the new model packs a flatter 305mm (12-inch) camber. Yes, the same radius as a Gibson Les Paul, making for easier string bends and lower action. The new Roadhouse features three Vintage Noiseless (1st generation) single coil-sized humbuckers wired to a five-way pickup selector blade switch, and master volume and tone controls. Lurking between the volume and tone knobs is the V6 preamp control, a six-position rotary switch that gives you access to a series of tweaked single-coil tones. Plugging in the Roadhouse reveals a slew of classic Strat tones. The pickups exploit the natural tone and woodiness of the guitar, while the Noiseless aspect lives up to their vow of silence, making them indispensable in a recording situation. As a result, bar metal, this is the best Fender electric guitar for just about all scenarios.
By placing two (or more) mics at different distances and angles from your speaker cab you will get two different sounds - and more variation will of course depend on whether these are the same model of mic, or different models. Mics placed further away will capture more room tone, and close mics are more upfront. Angled mics offer a less direct sound. Capture both feeds and blend or select from the two after recording.

Godin (pronounced Go-dan) was founded in 1972 by Robert Godin in Canada and now owns a number of highly respected acoustic guitar brands including Art & Lutherie, Simon and Patrick, La Patrie and Seagull. Their electric guitars, produced under the Godin brand, have been played by greats including Roger Waters, Elliott Sharp and John McLaughlin. Many of their high-end models come with 3 types of pickups - regular electric guitar pickups, piezo pickups for producing an acoustic-like sound, and Synth/MIDI pickups for making any kind of sound you want.

Kadence guitar has soothing sound quality with a bright tone, which indicates you have to go for higher gauge strings if you need bass-heavy sound output. This guitar is manufactured in our home nation – yes in India! was established in -2006. They produce an acoustic range of guitars that are available at a starting price of 5000 INR. approximately. Guitars in this brand that have a superior quality of sound start from 10,000 INR.

One of the most important Telecaster players was Clarence White, who, during his short career, contributed more to country electric guitar than almost anyone else, along with being a phenomenal bluegrass flatpicking guitarist and a pioneer of thecountry rock genre. He played with the Byrds, and Nashville West along with the bluegrass bands the Kentucky Colonels andMuleskinner. He enlisted the help of Gene Parsons and invented the StringBender, a device inside the body of the guitar that raises a string’s (either the B- or G-string most of the time) pitch when pressure is applied to the strap. His Telecaster is one of the most recognizable and is now owned by Marty Stuart.

{"pageName":"[gc] vintage: ovation","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
There have been two documented 1970 Brazilian rosewood D-28's, which are anomalies. The first one was #265783, which was retopped with red spruce in 1993. The second one is serial number 265941. There are several D-35's with mixed woods in the 3-piece back. Like D-35 #258962, which has a Brazilian rosewood center wedge in the back. Note some post-1969 Martins have some Brazilian rosewood, in the bridge, bridgeplate, fingerboard, or peghead veneer.

Carrying on the tradition of his hero, Derek Trucks has taken Duane Allman’s sound and technique and forged ahead with one of the most soulful slide sounds ever to be heard.  His uncle, Butch Trucks, was the drummer for the ABB, and Trucks began to play with the band at a very young age before becoming a full time member and keeping Duane Allman’s heritage alive for a new generation of listeners.

A guitar is not just an instrument but a way to express yourself. Everyone like a good guitar solo whether it be Frank Sinatra or Arijit Singh. The guitar is one of the most famous and the most widely played instrument ever. There are many companies which make guitars and it might be confusing at first to choose from so many options. Here we have curated a list from reputations and reviews of some of the best guitar brands out there for you to choose from. Find the sound you are always looking for and put an end to compromising. So get ready to be showered with some of the hottest deals we could find just for you in this list of the best guitar brands to buy online.
Another great book by Nicolas, this one shows you exactly how to create your own personal tone using amplifiers, effects and your guitar itself. Any beginner will benefit from this clearly written guide including everything from a breakdown of all the different ways to individualize your guitar playing technique, to information about virtual effects.
Here we have another very Beautiful and rare "The Aria Model" Vintage Japanese F style Mandolin with such amazing tone!!! nearing 40 years old these are AMAZING! This is the rare " The Aria" Model M700 as seen on the Classic inlay in the headstocks Gorgeous Brazilian Rosewood veneer is a super beautiful Japanese example of the highly revered F style mandolin made famous by Gibson. These older models were put out during the 1970s this example was 1973. These premium examples have become so popular with Players & Collectors over the past several years now. The inlays on the neck and headstock and the classic violin sunburst on this model are simply gorgeous! The top is solid tight grained old growth Sitka spruce and the back & sides are premium AAA figured & flamed maple, the neck is Mahogany This particular M 700 is in very good condition with some minimal wear from playing please refer to the pics for those details. The original case and pick guard are also still present and do come with this fine instrument the guard is simply off for now. With the resurgence in popularity of Bluegrass and other music styles utilizing the wonderful Mandolin sound in recordings and live performances these rare Gibson Replicas vintage mandolins have been steadily increasing in popularity and in value because players are catching onto the great old high end vintage Japanese instruments now so the demand has risen accordingly. If you're looking for a great Vintage Mandolin that is extremely well made with top craftsmanship utilizing top the grade AAA woods that have now aged and have a wonderful vintage patina to them these are the affordable Japanese vintage F Mandolin alternative choice to a $5000.00 - $10,000 vintage Gibson F-5 ..thats why many Pros today are seeking the best vintage for a great deal. This Old Aria M700 is simply a great one!.
{"pageName":"[gc] pdp: old kraftsman 196s k3 solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113469598;;;;evar65=Vintage-Guitars-Old Kraftsman","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
Gibson ES-335 Figured Electric Guitar The Gibson ES-335 thinline archtop semi-acoustic electric guitar is a popular choice among blues, rock and jazz musicians because of its warm tone and near-zero feedback. The 2019 Gibson ES-335 Figured model features a thermally engineered chambered maple center block, a hand-wired MTC Premiere control assembly, an ABR-1 bridge with titanium saddles and all-new MHS II humbucking pickups.
The RG (Roadstar) is one of the most famous Superstrat guitars on the market and remains a hugely popular model in all price categories. However, they also produce other collections such as the streamlined S Series (standing for ‘Saber’) and the relaxed Talman collection. Also look out for the Iceman – an edgy original Ibanez design, famously used by Paul Stanley from Kiss.
This legendary thinline electric guitar has been in continuous production since 1958 and has been updated for 2019. The new Gibson ES-335 Figured has the classic semi-hollow body construction with a chambered maple center block with a three-ply AAA-grade figured maple/poplar/maple top and back. Its bracing is made of quarter-sawn Adirondack spruce. The center block and bracing are both thermally engineered.
I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.

An Octaver is a cool little effect that will tune your original sound several octaves up or down in pitch. This effect can give you the ability to fill up the bass frequencies with your guitar. You can often see Jack White using this effect when he plays live with only one other drummer. He will turn on his octaver at certain points of the song to play bass lines.
So Rad...It's ok...To think that we were going to get all the campaigns and multiplayer for all the Halo's was amazing, and the game itself when it works is amazing just like it always has been, but I bought my Xbox One just for this game and the fact that it was broken for more than half a year is a shame and honestly unfair to the consumer, I still give it 3 stars since it works decently now but it lost its potential to be an amazing game....Lots of people seem to be having issues with multiplayer and campaign achievements; however, I have not noticed any campaign issues other than one time when I accessed a terminal it would not let me resume my game but after a restart I found I had just hit a checkpoint so no work was lost.
“William Kraus, who uses the logo (in highly stylized abalone) “WK” in which both the W and the K seem to be mating or something, is a maker of extremely fine sounding, beautifully hand-crafted guitars, in the traditional design of the great dreadnoughts of the past. This one, however, exceeds all expectations of excellence and beauty in that it has a Honduran rosewood back, sides and headstock overlay. About Honduran Rosewood, according to the website “globaltrees” (edited): Honduran Rosewood is a valuable timber species. Honduran rosewood – a/k/a Dalbergia stevensonii is known only from Belize, Guatemala and southern Mexico. Its valuable rosewood timber is highly sought after for quality products including musical instruments, turnery and carving. Honduran rosewood is reportedly the best wood for marimba and xylophone keys and it has been suggested as an acceptable substitute in guitars for Brazilian rosewood – Dalbergia Nigra — (international trade in which is now banned under CITES). Because it is a Dalbergia, like Brazilian, it sounds absolutely unbelievable!”
The Ibanez Artcore AS53 is a semi hollow-body guitar created for guitar players from diverse genres as blues, country, rock and jazz. The guitar feels nice and has a compact and comfortable body. The tone is rich, warm and full. If you are looking for that fat hollow body sound, this guitar makes it possible to switch from jazz to every semi-hollow rocking style of music. A combination of quality and affordability.
Beside learning the basics, avoiding modeling amps and multi-effect pedals in the beginning will allow you to focus on the few basic effects every guitarist needs along the way – Reverb, Chorus, Delay and Compressor. Reverb is a must, and most amps have onboard reverb effects. Once you begin to get the hang of playing guitar and wrap your head around those basic effects you can branch out to other effects and modeling amps.

A closer look at a 1981 Gibson Victory MV-II electric guitar. The Gibson Victory MV, or 'Multi-Voice' guitars had very wide tonal palettes; with coil-tapped humbuckers they could produce typical Gibson tones, but were also designed to 'out-Fender' Fender. Two models were launched in the summer of 1981. Whilst the MVX, was designed to do everything a Stratocaster could do, the MVII was 'primarily for the discerning country player' - placing it squarely against the Telecaster.

Being a grand auditorium body shape guitar, it’s a little smaller than the typical dreadnought size that we’ve covered several times on our list. That’s no bad thing, and allows this guitar to be nice and flexible, especially when combined with the ‘Expression’ electronics system that allows for some good tonal customisation. Match up with an effective wireless instrument system.
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
The tone controls compensate for and complement the somewhat lifeless and mostly midrange-y character of the average guitar pickup. The gain control, often designed with a pull-boost, basically excites and heats the preamp tubes, which along with judicious use of both the amp and the guitar’s tone controls will begin to produce much of the sonic seasoning and flavor that guitarists and their fans crave as it flows from the speakers.
Though pitch-shifting is an effect, it is easier to control when used via an insert point. However, if you need to use the effect on several tracks in varying amounts, you can use it via a send/return loop, providing the shifter is set to 100 percent wet. That way, you can adjust the effects depth for individual mix channels by using the send control feeding the pitch-shifter.
There’s a huge range of cheap electric guitars out there that would not look out of place on the stages of the world thanks to high quality manufacturing and the brands actually caring about their products – “cheap” does not always mean poor quality and plenty of guitars out there will give you a fantastic playing experience for many years without breaking the bank.
Gold trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Most bass amps have only one rated wattage. A small number of amps, such as the Mesa/Boogie Strategy 88 amp head, have switchable wattage. A selector switch on the 88 enables the bassist to choose its full 465 watt power; half power (250 watts); or low power (125 watts). A bassist playing an arena on one night, then a club gig, and then recording in a studio could use full, half and low power for the different volume requirements. The Quilter 800 Bass Block has a "master control" knob which switches between various watt outputs for a similar approach.
The S2 Custom 24 features a mahogany body with book-matched flame maple top, that follows the same double cutaway shape and detailed arch as the original Custom 24. The guitar's mahogany neck is also not far off, being rafted from mahogany with PRS' distinctive 25" scale length. It has a 24-fret rosewood fingerboard that has a comfortably narrow nutwidth of 1.656". Finally, the S2 Custom 24 owes its voice to its dual humbucker pickups that include the S2 Vintage Bass and the S2 HFS Treble - which provide PRS' characteristically open and clear tone. You can push or pull the tone knob for single-coil tones should you need them.
While the acoustic-electric guitar isn’t actually its own body type, it’s simply an acoustic guitar with electric pickups to amplify its signal (we’ll talk about pickups soon!), it’s worth mentioning that you’re almost never going to get a comparable tone to that of a hollow body or really, any kind of electric guitar. It’s just not built for that, and in fact, it’s almost always better if you want that acoustic sound, to buy a really resonant acoustic guitar and add a nice soundhole pickup (like this one) instead.
This is an American Gibson Les Paul electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above (except it does not include the slaps and slides preset) and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jazz and blues but can easily be used for rock if used with more distortion. It has a very full rounded sound with good sustain and when played harder has a bite to the attack. This guitar is a classic that has been used in alot of types of music.
Modelling/digital amps: This type of guitar amp uses digital technology to stimulate old-fashioned technology. They are able to emulate old amplifiers using software, and this feature enables them to combine several amps into one. Their programmable nature enables the user to switch digital effects such as the chorus, delay, and other features. Some models of these amps have a digital or analog output that goes directly to a recording or PA system through speaker simulation.
It’s hard to definitively name the best guitar books. Everyone is working with a different skill set, and you’ve all built up your skills in a different way. However, all of the books below provide enough information to help you improve some aspect of your playing. They may help some of you more than others, but they all have enough helpful tips in them to justify their purchase. Our team read these and many more, and these were the titles we found most inspiring. It turns out we aren't alone in loving these books, since these books get great reviews all around, but these were the ones we found most enlightening. The fact that we were excited to practice and couldn't wait to pick up these books to learn more is ultimately the reason they made this list. We think these books will provide or build a solid foundation for anyone looking to learn the guitar in an efficient way.
I bought my Norma accoustic in 1971 from a lady dealer who bought-out other stores going out of business. I paid $50. for guitar,case and strings. Best $50. I`ve ever spent. The sound gets better everyday. I have played the local market a lot, and fronted a Jamboree stage for 12 years (did the microphone work and sang), where I saw many a performer and their guitars come and go. Everyone was envious of my good sounding guitar. I applied a Dean Markeley electric pickup into the round hole and "wow" what a sound. Wouldnt take nothing for it. I own 7 accoustics,4 ele and three ele bass` guitars. I take my Norma everywhere. I am in the Georgia Music Hall of Fame and get lots of opportunities.

When buying your first guitar, the cost is always a matter of consideration. Be careful not to let this become the focus of the search otherwise you run the risk of compromising on quality. Think about it, you don't want to learn on the shoddy piece of equipment. You can usually get a good value with proper research. If you have a friend who plays the guitar; find out if they are willing to give you the benefit of their experience.

Modulation, in general electronics, means the altering of signal strength. In audio devices, modulation is a control feature that varies the strength of some effect over time to alter tonal properties. Some modulation effects mix ("modulate") an instrument's audio signal with a signal generated by the effect called a carrier wave.[70] Other modulation effects split an instrument's audio signal in two, altering one portion of the signal and mixing it with the unaltered portion.[71]

Establishing a guitar school in New York requires competing with the highest concentration of possible distractions. This book follows a step-by-step method for identifying the essentials, but also details practice plans and highlights how to practice. Everyone will keep shouting about how you’ll need to practice hours upon hours a day to become even a serviceable guitarist, but advice on just how will be scarce. I took lessons for years and even I don’t remember how my teacher told me to practice. This book will lead you through a progression from the absolute basics to complicated song construction. My only quibble with this book is that it suggests that A minor is the saddest chord, when it is, in fact, D minor.
Dave Friedman (Rack System, Ltd.): “Pedal order is a very subjective thing, and I’ve had people do it all backwards because that’s the way they like it. Generally speaking, compressors come before overdrives, modulation things are kind of in the middle, and delays are at the end. The wah is kind of a personal preference. Sometimes it’s in front early in the chain, and sometimes it’s after overdrives.
This is one of the most popular and oldest brands of acoustic guitars available in India. There are various brands and models of guitar available under the umbrella of Gibson Guitar Corporation. ES-335, SG, Flying V, and Firebird are one of the most iconic models of guitars produced by this brand and their classic acoustics include the hummingbird. These are ideal guitars that can be used by beginners made in – the USA. The price of Gibson 6-string guitars starts from 4,000 INR approximately.
The Epiphone G-400 features a mahogany body and neck and a rosewood fingerboard. It has Alnico Classic PRO™ pickups with coil-splitting on both pickups via a push/pull control on the pickups’ volume controls which gives you a lot of tonal variety. If you want to nail it like Angus Young, Eric Clapton in his Cream days or Tony Iommi from Black Sabbath, the PRO gives you the sound of a true SG without the vintage price tag.
I have my Dad's '68 Kent guitar and am looking to have it restored..any info on parts would be helpful...I think all it needs is the spring for the vibrato (whammy bar)...everything else is there...the rubber piece on the bridge looks quite worn or perhaps brittle (rightfully so). Does anyone know what this guitar is worth? It's in orange sunburst ...It's a left handed guitar
Most Fender guitars are equipped with single-coil pickups. They have a lower output level than dual-coil pickups but sound brighter and sharper, which is perfect for clean and crunch sound. Both the Telecaster and the Stratocaster generally have an ash or alder body, a maple bolt-on neck and a rosewood or maple fretboard. Some other Fender models were also moderately successful (the Jazzmaster, the Jaguar or the Mustang). Squier, a brand that originally manufactured strings, was bought by Fender to become a sub-brand and sell guitars manufactured in Japan from 1982 onwards.
The Effect: By all standards, tremolo is one of the oldest, as well one of the simplest effects you can get these days. The whole idea behind a tremolo pedal is to give you that wave type effect by reducing and increasing the volume of your guitar’s original signal. You can adjust the speed of the effect and how deep those dips in volume are going to go.
To make the OM more suitable for banjo players, the neck was made narrower and less V-shaped than previous Martins. The fingerboard was narrowed from the then-standard 1 7/8" to 1 3/4" at the nut. In addition to make the OM more banjo-like and to give it a distinctive look, banjo style tuning pegs were used. To do these, the headstock had to be made solid, instead of slotted. Previously Martin headstocks had all been slotted with tuners attached to the side mounted on a single plate for three tuners. No single-unit guitar tuners were available, so banjo pegs were a natural.
Very cheap acoustics are usually not such a great idea. Often their sound quality is poor and they are hard to play. I often see students selling them after a six-month struggle (if they managed to stick with it that long!). So if your budget is very tight, I would not get an acoustic. You may think you save a little money because you don't need to buy an amplifier as well, but as I said before you don't have to use an amplifier to practice anyway.
Distortion is an important part of an electric guitar's sound in many genres, particularly for rock, hard rock, and metal. A distortion pedal takes a normal electric guitar signal and combine harmonic multiplication and clipping through the use of analog circuitry to create any number of sounds ranging from a fuzz sound to the sound of an overdriven tube amp and beyond! Distortion is essential to Heavy Metal Music.

Nylon strings are essential for any classical instrument, and if you are planning to play classical music or Latin styles such as flamenco, a nylon string guitar is the way to go. Steel strings are more appropriate for rock, pop, blues, and pretty much everything else that doesn’t fall under the classic umbrella. You can check out our article on the best classical guitars for beginners.

1969 Alvarez 5053 Acoustic Brazilian Jacaranda Rare Old Script Logo WoW Here we have one of the very fine Alvarez model#5053 a very High End Japanese crafted Martin D-45 Copy from this golden era. This example is an oldie but a goodie made in 1969 #5053..Bone nut & saddle for the preferable upgrade to a true bone nut & saddle and of course the strings are new Martin Marquis 80/20. This is a unique & exotic true Vintage Japanese version of the classic ornate Martin D-45 again this one was Crafted in Japan by one of the finest acoustic instrument builders from this time period Alvarez, This guitar is possibly even a bit more fancy than even the actual Martin D-45 with the intricate exotic woods inlayed wow see this examples 3-piece back simply gorgeous! The Martin D-45 version just has a 2-piece back in most cases...This example is an Alverez model #5053.,,see pic detail. Bound body(front w/b/w/b/w/b/w, back w/b/w/b),bound neck(white),bound peg head(w/b/w). See the Beautiful detailed Abalone inlay around the sound hole with its white mother of pearl fret markers. With an adjustable Brazilian Jacaranda Rosewood bridge with a bone saddle and sweet smelling exotic looking Rosewood fretboard that is simply stunning. Special truss rod cover that has the word Alvarez in gold lettering. Select Sitka AAA Spruce top, - awesome landscape figure sides are very figured exotic rosewood. Smells great. Wonderful exotic figuring please see the pics. for the back and sides Better pictures to come soon...The superbly detailed ornate Perfling between the woods on the back is just absolutely stunningly gorgeous,unbelievable craftsmanship at this price point!!. I've only seen one other like it. except or the other one we have!!!! yes we have another 1974 available 5053 in stock as well!....WoW! That's Lightning striking twice... Real difficult to find much info on these rare exotics. A truly Beautiful vintage Japanese acoustic guitar and quite the collectible instrument ...for the person wanting only the best at a fair price...not on sale for $6,000-8000 like the vintage Martin would be this one is a true bargain Vintage exotic at under $1500 unheard of.. WoW! What a great find. JVG Rated at a solid 8.5/10 very good original Vintage condition. This one is so very close to our Yairi 5060 we had its quality like the Yairi without the signed label...and the price tag for hundreds less a truly great find. .

went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back. when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier. i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.
Try different gauge strings. As you know, guitarists can be creatures of habit. But heavier strings can help both your tone and fingering strength, while lighter strings may suit bigger bends. Experiment! Billy F Gibbons has the thickest tone but his top E is only a .007. Stevie Ray Vaughan’s top E was a .013. Changing string gauge may just bring out your best inner-self.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
You may wondering how these chord shapes has been constructed. For now, you just need to know that a chord is based on the notes of a simple scale, which has 7 notes, and you finish on the original note, one octave up, for a total of 8 notes. A basic Major chord is made up of the 1st note in the scale of whatever key you are playing in, also called the root note, the 3th note, and the 5th note. We’ll get into that later, when we talk more about scales.
This pedal has been a great start, it has been looked after very well and is in excellent condition. I am upgrading my sound which is the reason for the sale. “Great guitarists know it's all about nuance. With its built-in expression pedal, the Zoom G1Xon allows you to add subtlety and refinement to your performance. Add in 100 great-sounding guitar effects and amp models—with the ability to use ...
Mikko, spot on. Even light wood has density, and there comes a point in solid body electric guitars where how dense any piece of wood is only makes a difference acoustically. The point you made about how a guitar feels when you're playing it is sound, though. Its weight and acoustic resonance will affect how you respond to it and how you attack it (same for neck thickness and profile), and that will account for the preference we have for one guitar over another of the same model.
Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.
By 1964, most of Orbison’s early rock and roll contemporaries were either dead, strung-out on drugs, in jail or making crappy movies, but Orbison’s musical career still hadn’t reached its peak. In between the ballads, he recorded singles like “Mean Woman Blues” (check his wild guitar solo) and “Oh, Pretty Woman” that showed upstarts like the Beatles, the Animals and the Rolling Stones that Americans still could rock harder than any Brit.

{ "name": "Belmont Blue", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Belmont-Blue-1500000152096.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "12-03-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152096", "shipToStore": true, "displaySku": "K47863000003000", "displayId": "1500000152096   POS #: 113861058", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000003000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Belmont Blue", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }

Replace components. From plugging in and unplugging my guitar so much, the stock input jack lost its grab. So I had an extra Radioshack one lying around, and I soldered it in. Now all my cords are held tight. I also had a problem(common with Teles as I understand it) with my input jack "cup" coming out with wires and all. Once you take a look at how it's held in there, it's an easy fix.
When you buy an acoustic guitar that you’re drawn to because of its aesthetics, you will become more motivated to play it. This is especially important for beginners who may find it tedious to do the same exercises over and over again, or who may be tempted to skip practice sessions. A good-looking guitar is something you will love playing again and again.
I've been an on/off guitar player for at least 15 years now. Never really good, but steadily improving. My hardest thing is consistent motivation. I go through spurts where I study theory and practice like crazy and then, suddenly I just stop. I got this both because I was exceited about it's teaching potential (lessions were $20/30 min when I was a kid, got this for $25) and it has got me playing again and is a lot of fun.
Some bass amplifiers have an "overdrive" or distortion effect built into the unit. The Peavey Century 200 has an onboard "distortion" effect on the second channel. The Peavey VB-2 also has built-in overdrive. Aguilar Amplification's AG 500 bass head is a two-channel amplifier, one of which offers a "saturation" control for overdrive. A variety of BOSS combo amplifiers have a built-in "drive" effect. Gallien-Krueger's bass amp heads have a "boost" control which provides a simulated tube overdrive effect. The Behringer Ultrabass BVT5500H Bass Amplifier Head has a built-in limiter and overdrive. The LowDown LD 150 bass amp has a range of overdrive sounds, from a slight hint to heavy distortion. The CUBE-20XL BASS amp includes built-in overdrive.
Finally, the Univox 1085 PA Amplifier System ($1,035) was another piggyback with 10 tubes, 105 watts, four channels, eight inputs, external echo or equalizer connection, four volumes plus master volume, bass, middle, treble, presence, reverb with footswitch, and a cabinet with four 15″ Univox speakers with 20-ounce Alnico magnets and 2″ voice coils. It also had 12 high-frequency horns with crossover networks, usually used with two cabinets.
Their innovation continued by developing a bowl shape guitar body - the result, at least to my ears and that of many other guitarists, is that the resulting tone of their acoustic-electric guitars is similar to those using traditional tonewoods in their construction. Unlike more radical brands like RainSong, they still use traditional woods for the tops of their guitars.
The movie is very hauntingly beautiful, and it's especially highlighted by an awesomely haunting score, and some breathtaking visuals. The story is interesting, but it's definitely slow-paced, and the climax is much more of an intellectual payoff than a spectacular action scene (which many viewers might be hoping for). So I can definitely see why some people would hate this film, but I loved it. It's one I definitely won't forget anytime soon too, and it's great to see Natalie Portman (my old favorite actress) back in top form! watch movies online pro

Start with all of the mics clustered together three to six inches from the grille cloth, pointed at the center of the speaker. On a multiple-speaker cabinet, don't assume that all the speakers sound the same. Rather, listen to each of them at a sensible volume, and then mic the one that sounds best. If the speakers sound alike, a miking position close to the floor will generally provide a little more low end.
I commented earlier that the guitar amp is the instrument as far as the mic is concerned, but if the guitar is played in the control room with the amp itself in the studio (assuming decent separation between the rooms), a capacitor microphone close to the guitar neck may be used to capture the direct sound from the guitar strings. This sounds a bit thin and naff on its own, but sometimes works well in combination with the miked sound. A similar effect can be achieved by splitting the guitar output, feeding some of it direct to the console via a DI box and then either removing some low end or using an enhancer to exaggerate the brightness. DI'ing the piezo bridge pickups (where fitted) may also produce a similar result, and any of these techniques may also be used with guitar recording preamps as well as when miking.
If you’re new to the world of guitar or bass, a looper pedal is a great way to hone your skills. A looper pedal is not an effect, but more a tool that allows you to record chord progressions, notes or riffs and then play it back through your amp. It’s ideal for playing a chord progression or rhythm section, looping it and then playing a lead line or riff over the top – like two guitars playing together.
The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
Leo Fender's work is timeless. This is easily deduced by simply looking at the popularity of both Stratocasters and Telecasters. With that said, Strats are arguably the favorite between the two. A top of the line American-made Stratocaster still costs a bit more than what our budget here is, however, there is an alternative. Fender's plant in Mexico builds great Stratocasters that aren't really behind their American counterparts. You essentially get a near identical performance at a more affordable price due to the stigma. The Fender Classic Series '70s Stratocaster is one such guitar.
The slide part on that track was quite difficult to simulate, but again, the guy I have playing in my band, that I've been playing with for a while, can do it, and he and my son are the only two guys I know that play it right. Recently, I had Ronnie Wood playing with me, and he did a good job with it. I think if you have your head on it, it can be done.
The first design was an Early Telecaster model, called Squier, with a single mic. The main contribution Leo Fender did, was the bode and neck removal separetly. In previous models, when the guitar need repairs, the complete instrument needed to be sent, while, after Leo fender design, the plate could be unscrew and sent to the shop only the damaged part.
The guitar starts off with a basswood body, carved into the familiar Stratocaster double cutaway. Even the pickguard resembles that of a Strat, although the controls are different, with the Adrian Smith SDX just having two knobs for adjusting master tone and volume. While the neck still looks like a Strat, it is meant for fast and comfortable play, with its compound radius maple fretboard, 25.5" scale length, 1.6875" nut width and 22 jumbo frets. Giving this guitar its versatile tones are two single coils for the neck and middle position, along with a humbucker on the bridge, all of which are designed by Jackson with the approval of the Adrian himself.

PONTE NON TREMOLO Per cambiare le corde, infilare le corde nuove negli occhielli di guida sul retro della chitarra e posizionarle in seguito sopra la selletta. È possibile regolare l'intonazione spostando la selletta in avanti o indietro utilizzando un cacciavite a testa Phillips (+) sulla vite di regolazione dell'intonazione nella parte posteriore del ponte.

"Bring up one mic at a time and get it to optimum level on your board. To check that they're all in phase, make sure the signal is adding and not subtracting as you add in the other mics. If not... reverse the phase. Then start to put up each mic, one at a time... as you move the faders back and forth, you'll hear the greatest EQ, because of the phase relationship... Then if you flip the phase on one of the mics, you can really have some fun — it'll act like a filter."

Look, as far as we know, our asymmetrically coiffed party pal has never held a guitar in his life. But no contemporary musician has a more primal understanding of adrenaline-pumping, pulse-raising, chest-caving bulldozer riffs than dubstep mosh ambassador Skrillex. Somewhere between the unfiltered piston-pumps of nü-metal and the twinkling emocore melodies that weaned him is a gaping sarlacc of yawping melodies and buzzsaw edges. The bass drop to “Scary Monsters and Nice Sprites” might just be this generation’s “Smoke on the Water” — look no further than the obscene number of “Skrillex guitar cover” videos on YouTube!

As far as using the tone knob, it’s all about personal preference, and the quality of the electronics in the guitar (and the amp). Players of less expensive guitars often find that the tone of the guitar becomes “muddy” or “stuffy” very quickly as they turn down tone (or volume), and so they keep the guitar “wide open” with all knobs on their “10” setting. At the least, many players avoid going below “5” on the tone dial, keeping the majority of the midrange frequencies that define the real character of the guitar’s tone.

Bridges and Tailpieces – These two parts of the electric guitar work in unison to control the tone and playability of the guitar. The bridge is mounted on the lower portion of the guitar. The strings are routed over the bridge before ending in the tailpiece. Bridges help to tune the strings of varying length, thickness and metals and they allow easy adjustment of the string length.
“Tone that emulates the human voice is always more accessible,” Waara continues. “Otherwise, purely electronic music would have taken over, and we wouldn’t be making guitars anymore. There are some absolutes in human DNA about wanting to feel connection and that’s probably a fuller frequency tone, that’s tone that is more reminiscent of the human voice. Or, for instance, a violin or organic instruments that have been around for hundreds of years. When we talk about guitars having an organic quality, it’s because that’s rooted in what human beings know. Which is air moving, wood vibrating, people speaking.”
{"pageName":"[gc] pdp: ibanez artstar as153 semihollow electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"24-month,36-month,60 month","prop5":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";H91419;;;;evar65=Blemished-Guitars-Ibanez","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}
The body is very much the same, composed of a chambered basswood topped by an elegantly contoured laminate maple top - complete with the easily identifiable Gretsch style pickguard. The neck specifications also follow the Pro Jet Bigsby, with a shorter than usual 24.6" scale maple neck, 12" radius rosewood fingerboard, and 1.6875" nut width. It has a total of 22 medium jumbo frets with Neo Classic thumbnail inlays serving as fret markers. Because its not a Filter'tron pickup, the sound of this guitar will be subtly different, but apparently good enough for the many users that have rated this guitar highly and even recommend it.

Delay is essentially echo, but it can be so much more when used well. The two most important knobs are “time” and “repeats”. Time will increase the length between repeats, and repeats will adjust how many echoes are heard. While it is tempting to max the repeats and enter space rock land, less can be more. Used gently you can get reverb or slap-back rockabilly sounds. With careful knob setting you can even create harmonies and loops like The Edge.
This guitar is simply phenomenol and the build quality, materials, and attention to detail are just mind blowing! I have a collection of vintage Golden Era Gibsons, Fenders, Gretschs, and Martins, so it takes a very special guitar to impress me. The Kraus OM delivers in every way! Just check out the rosette: Paua shell bordered by curly Koa wood inlayed into a red Spruce top-simply amazing! And the curly koa fretboard binding is a sight to behold! The Honduran Rosewood is becoming exceeding hard to find, and will probably go the way of Brazilian Rosewood as a protected wood soon. The Honduran Rosewood used on this guitar took months to source, and it looks spectacular! The guitar itself took 16 months to build, and the wait was well worth it, and well beyond expectations!

Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.

In the 1960s Japanese guitar makers started to mainly copy American guitar designs and Ibanez branded copies of Gibson, Fender and Rickenbacker models started to appear. This resulted in the so called Ibanez lawsuit period. After the lawsuit period Hoshino Gakki introduced Ibanez models that were not copies of the Gibson or Fender designs such as the Iceman and Roadster. The company has produced its own guitar designs ever since. The late 1980s and early 1990s were an important period for the Ibanez brand. Hoshino Gakki's relationship with Frank Zappa's former guitarist Steve Vai resulted in the introduction of the Ibanez JEM and the Ibanez Universe models and after the earlier successes of the Roadster and Iceman models in the late 1970s/early 1980s, Hoshino Gakki entered the superstrat market with the RG series which were a lower priced version of the Ibanez JEM model.

Tribute Legacy Electric Guitar Candy Apple Red Rosewood Fretboard. The G&L Legacy blends contemporary refinements from the Leo Fender-designed S-500 and Comanche models with classic Alnico V pickups. If your holy grail is faithful Alnico single-coil tone with modern refinements and superb craftsmanship, the Legacy makes for an excellent choice. The Legacy's vintage-spec CLF-100 Alnico V pickups have that unmistakable chime and quack reminiscent of the best examples from the late ˜50s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo's private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D engineer at another company when he was tasked with finding out what was so special about the early bolt-on guitars many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail guitars, spending time out on the shop floor talking to builders still working in the pickup department since the ˜50s, all on a quest to discover where the real mojo was - and wasn't. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming down that old production line varied considerably. That meant coming up with the right specs for the Legacy pickups was more challenging than simply following the prints. Gagon's persistence paid off as the Legacy garnered rave reviews from both players and magazines like Guitar Player and Guitar World. This axe is no slave to the past, however, starting with Leo's PTB (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What's more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy is...
Charles Kaman put a team of employees to work on inventing a new guitar in 1964.[2][7] For the project, Charlie chose a small team of aerospace engineers and technicians, several of whom were woodworking hobbyists as well. One of these was Charles McDonough, who created the Ovation Adamas model.[8]Kaman founded Ovation Instruments, and in 1965 its engineers and luthiers(guitar makers) worked to improve acoustic guitars by changing their conventional materials. The R&D team spent months building and testing prototype instruments. Their first prototype had a conventional“dreadnought” body, with parallel front and back perpendicular to the sides. The innovation was the use of a thinner, synthetic back, because of its foreseen acoustic properties. Unfortunately, the seam joining the sides to the thin back was prone to breakage. To avoid the problem of a structurally unstable seam, the engineers proposed a synthetic back with a parabolic shape. By mid-1966, they realized that the parabolic shape produced a desirable tone with greater volume than the conventional dreadnought.[9]
Yowza, here’s another excellent guitar for rock and metal beginners. It’s similar in some ways to the Ibanez RG (a fast, thin neck, jumbo frets, 2 humbuckers, and a 3-way switch), but has some important differences. This guitar sports a compound radius fretboard, carved quilted maple veneer top, Les Paul-style bridge, and a bound fingerboard. Very classy appointments that aren’t often found in a beginner guitar. Jackson makes amazing guitars, and this one’s a beauty.
Just SOLD OUT: here is a great sounding wonderful 43 year old Vintage Japanese OOO guitar in excellent vintage condition. We have already set her up with our Martin Bone Nut & Compensated Saddle and action is dialed in to Martin specs. We also upgraded the original plastic bridge Pins to SOLID Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic if not familiar with the Morris brand thats ok many are not, I have know of these for 2 decades now many of these were made in the Terada factory in Japan... another name you may not have heard of none the less they are know to make the highest end guitars in Japan in those days and also today, for makers like Ibanez virtually all of their top end guitars like Musicians - Artists - George benson GB line and the old Aria L-5's and Ibanez L-5's and many others continuing on today in that great Custom Shop tradition. This is one of them and is very well constructed with top workmanship and fit and finish build quality is comparable to a Martin- Taylor_Gibson and so on... that is to say no worries this guitar Morris has an excellent pedigree. Guitars of great playability and great sounding what more do you need?.... This guitar was built from wods aged at least 20 years at time of build that was over 40 years ago and just look at its condition to this day... it has truly stood the test of time. See for yourself... it this price range a wonderful classic 000 style Japanese true Vintage guitar in its own right. Great Value and great fun Japanese vintage collectible. For a song. .
Pick-Ups – The pickup is preset underneath the strings, on the body of the electric guitar and it works as a magnetic field. When the metal strings are plucked they vibrate and generate a current that is transmitted by the pickup to the guitar cable and to the amplifier. These may is just a single pickup in a guitar or 3 to 4 pickups depending on the guitar.
When you have signature models for two of the most impressive guitar virtuosos in the world, Steve Vai and Joe Satriani, there’s certainly something you’re doing right. Such is the case with Ibanez. Started as a sub-brand beneath sheet music and music-product distributing company, Hoshino Gakki, Ibanez began in the 1920s, specializing in importing the guitars of respected Spanish builder Salvador Ibáñez. In the 1930s, they adopted the maker’s name as a show of respect. In the 1960s through the 70s, the brand shifted focus to making high-quality knockoffs of Fender and Gibson models, until Gibson’s parent company filed a lawsuit for copyright infringement. After settling out of court in 1978, the brand again began making original models, including signature guitars for the likes of Kiss frontman Paul Stanley (who plays a guitar similar in shape to the Iceman pictured above) and Bob Weir of the Grateful Dead. Now they specialize in precision instruments for musicians who like their music loud, hard, and fast.
Ibanez JEM77WDP Electric Guitar With the Ibanez JEM77WDP Steve Vai Signature guitar, you can get a little piece of the legendary guitarist. This model is also commonly referred to as the JEM Woody because of its distinctive poplar burl veneer pickguard and matching headstock. Part of the company’s Premium line, the JEM77WDP electric guitar also features two cutaways and Steve Vai’s signature monkey grip.
The Jameson Left-Handed Black is an acoustic-electric guitar that comes with a slick appearance, a smooth body, and an impressive sound. With its thinline frame and cutaway design, this model is good for both amateurs and seasoned guitar players. You get a guitar that sounds just as awesome regardless if you’re playing it unplugged or through an amp.
In general, this measurement is taken by measuring the distance between the bottom of the string and the top of the 6th fret while holding the string down at the 12th fret and the first fret. This is where the capo comes in handy - put it on the first fret so your hand is free to take the measurement. Using a feeler gauge of the desired height, in this example, 0.010, hold the low E string down at the 12th fret (with the capo on the first fret), and measure the distance between the top of the 6th fret and the bottom of the low E string. If the distance is greater than the desired relief, then you need to turn the truss rod clockwise (towards your right) as you're looking down the headstock towards the body of the guitar. If the distance is less than the desired amount, then you need to turn the truss rod counter-clockwise (towards your left) as you're looking down the headstock towards the body of the guitar. The basic rule is:
Electric guitars are the easier to play as compared to acoustic guitars. But only because the chords are easy to play, that much force is not required to hold the chords as well as strum the chords. So it would better if you first practice the chords and the strumming on an acoustic guitar. The song Yellow by Coldplay, mentioned below, is considered as one of the best guitar tabs for beginners.
That’s why it’s incredibly important that once you work through your first method book you should start seriously considering finding a teacher to further your education. A teacher can help give you the tools that you’ll need to continually advance on your instrument, which in turn will ensure that it will be a lifelong source of entertainment and enrichment.
Many recordings feature multiple guitar tracks playing simultaneously, but sometimes this can clutter up the mix. Another approach is to make each part sound distinctive by using different combinations of guitars, amps and effects. Panning the guitars to various areas of the stereo spectrum will create space for each part, while subtle use of ambient effects can create a sense of depth. EQ can be used to help guitars blend together. Try cutting certain frequencies from one guitar track and boosting those same frequencies in another.
Nickel finish Frequensator style split trapeze tailpiece. This split fork design originated on archtop models from the 40's. The difference in fork length alters string tension behind the bridge to add depth to the bottom strings and brilliance to the top strings. Width of plate with mounting screws = 2 17/32 in. (64.3mm). Length of mounting bracket side with mounting holes = 1 39/64 in. (41mm) from end to bend Length of mounting bracket from bend to trapeze hook tops = 1 13/64 in. 30.5mm.) Length of short trapeze to top of string retainer bar (not including nut heights) = 2 1/2 in. (63.35mm). Short bracket width = 1 3/64 in. (26.65mm). String Bracket width = 1 3/16 in. (30.35mm). Length of long Trapeze section including string bracket = 6 in. (152mm). Widths of each trapeze and string bracket are equal.
It comes with two 6.5-inch speakers, delving out 100 W each for a total of 200. Now, the small woofer diameter might make these units work less-than-perfect for rendering stomach-churning bass noise, but ZT Amplifiers never intended for them to be used as such. Instead, they are supposed to deliver loud and clear enough sounds in the treble and mid ranges to make the guitarist hold its own even when a loud drummer is present.    
In terms of the Teisco brand, the moving force was Jack Westheimer and his W.M.I. company in Chicago. According to published accounts, Westheimer began importing Teisco-made Kingstons in around 1961, although these were not promoted in the trade press until the beginning of ’64. It was this connection that would make Teisco the dominant powerhouse it was to become.
There's no wrong answer to which neck will work best for you. When people speak of rounder vs. flatter being better for chording/bending, they are referring to the radius of the fretboard, not necessarily overall neck shape. The fretboard on all guitars has a curvature across is, from the the treble to the bass side. Generally speaking, most people would agree that rounder fretboards facilitate better chording, while flatter ones facilitate better bending, but even that's not hard and fast.
Many people will say that Overdrive and Distortion pedals are basically the same thing: wrong! While the overdrive tends to add gain and texture to your clean tone, emulating a cranked amplifier, the distortion intentionally clips and distorts the waveform of the guitar signal. The effect of distortion pedal is much more audible and the resulting sound is harsher and louder, and sometimes completely different from the starting sound. Distortion pedals are perfect for rock and metal players, and represents a safe boat for guitarists that may feel the need to have a backup to their tube amplifier: a distortion pedal into the clean channel of a rented amplifier can save your gig! The ProCo Rat 2 is an instant classic, while the Electro Harmonix Metal Muff/Top Boost gives you some serious distortion with a top boost in single box. And for your über-metal needs, the Harley Benton Extreme Metal is here to help.
Don't just slap an effect on a track: why not try using automation to apply effects (in this case delay) on single words or phrases to make them stand out? Modern audio sequencers make it very easy to play around with spot effects — that is, effects which are applied to single notes or phrases within a track, rather than to a pattern or track as a whole. Try using different reverb styles on the snare within drum patterns: a short decay on the '2' and a long decay on the '4' for example. Another idea is to apply spot chorus to individual words within a vocal line, as a way of adding emphasis to the lyrics. The 'freeze' or audio bounce-down function of a typical sequencer allows you to get around any problems your computer might have in running lots of instances of a particular effect. Stephen Bennett
In recent years,[when?] guitars and basses with multi-scale or fanned-fret fingerboards started to appear. These instruments are supposed to offer an advantage over the classical fixed-scale guitars and basses by providing more freedom in setting the tension of each string at the design and manufacturing phases. This may result[according to whom?] in a more uniform tension of the strings, as well as possibly[weasel words] offer timbre and tonal characteristics somewhat different from the usual fixed-scale instruments.
This pedal has been a great start, it has been looked after very well and is in excellent condition. I am upgrading my sound which is the reason for the sale. “Great guitarists know it's all about nuance. With its built-in expression pedal, the Zoom G1Xon allows you to add subtlety and refinement to your performance. Add in 100 great-sounding guitar effects and amp models—with the ability to use ...
The octave pedal raises or lowers your pitch an octave. This makes a huge sonic impact as soon as it is heard. This pedal will make your guitar sound huge, broad and bass-rich or fierce and piercing - even both. It's best to look for a pedal with a “mix” knob, so that your original tone is not completely lost. One step and you can change the direction of the riff or the entire song. This effect was used extensively by Jimi Hendrix in combination with a fuzz tone, while more modern users include Tom Morello and Jack White.
You probably won’t have to do this, but if you do, here’s how to go about it: First, slacken the affected strings and move them to the sides of the saddles. Then take some needle-nose pliers and remove one end of the retaining spring (different styles of bridge will use different types of retaining spring – sometimes there is an individual one for each saddle, in which case you might even need to remove the whole bridge to do this).
Today’s beginner guitars are far superior to the hunk of wood with strings I started with, and now there is a huge array of instruments to choose from. In fact, I’d go so far as to say if you only intend to play guitar for fun you’ll never need to spend another dime on gear beyond your starter setup, if you don’t want to. (Except for things like strings and picks, of course.) That definitely wasn’t true thirty years ago.

I own one of these that I found in the trash on the side of the road - I have to say it has a good bit of wear and looks like it might fall apart any second in blue with black and chrome hardware - you couldn't pay me to get rid of this thing. I love the way it sounds and plays - its the benchmark for me for all my other acoustics - I dig the sound of this beast. Been a total metal monster for an acoustic \m/>.<\m/

Jazz guitarist George Barnes is known to have played one of these prototypes in public in 1931, though far as I know, there's no recording of it.  Jack Miller played a "frying pan" in Orville Knapp's orchestra at Grauman's Chinese Theater in early 1932. Another musician, Gauge Brewer, bought two of the first available Beauchamp/Rickenbacher guitars, the other was a more conventional electrified Spanish guitar, and played them in a press event in Kansas, and a series of concerts around Halloween that year. Brewer also recorded both of these sometime in the mid-1930s, but it was one of the old direct-to-record recordings, a one-off, never released to the public (my Mom recorded a bunch of those 78s back in the 1940s and 1950s... tape wasn't quite there yet for regular folks).  Andy Iona was probably the first professional Hawaiian player to go electric.

The first Touch Guitar Invention started in 1959 with the filing of patent #2,989,884 issued in 1961 as the first touch tapping instrument which could be played on two separated necks Simultaneously by muting the strings at the distal end of the neck along with numerous other claims. Until 1974 it was known as the DuoLectar and with a new patent "the "Electronic Mute" has been known as the "Touch Guitar. It is held in the normal way over the shoulder and design with the left hand playing the lower bass neck in a traditional way and the right hand playing over the top on a neck which has a wider string spacing allowing the hand to be used in both vertical and horizontal angels to the strings. It is absolutely off at all times, until Touched or picked.
{"pageName":"[mf] pdp: epiphone thunderbird classiciv pro electric bass guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: bass: electric bass","prop1":"[mf] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[mf] shop: bass: electric bass: 4 string electric bass","prop6":"[mf] shop: bass: electric bass: 4 string electric bass","prop3":"[mf] shop: bass: electric bass: 4 string electric bass","prop4":"[mf] shop: bass: electric bass: 4 string electric bass","products":";H82691","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] product detail page"}

Here’s an interesting (they’re all interesting to me!!!) guitar that shows the evolution of Matsumoku made guitars.  Even the earliest solid body electrics that came out of the Matsumoku plant were made of solid wood and displayed really good wood craftsmanship!  Lots of start up companies went to Matsumoku in the early days because the plant had proper wood drying facilities (if the wood wasn’t dried properly, the guitars often became seriously messed up during the import trip across the ocean).
This is definitely the coolest music store in the Pacific Northwest. If you are a high end guitar lover, you need to go. If you are a pedal nerd, you NEED to go. James, the owner, has relationships built with the coolest vendors in the country, and manages to collect the coolest gear. Earthquaker Devices makes a custom line of pedals just for this store, for christ's sake. I've never seen so many pedals in my life, and that's really neat because not many stores focus on that. The staff makes you feel right at home. They are so knowledgable and pleasant to be around. No highbrow guitar store attitude to be found here. So all in all, you need to go check it out. It's a super fun place to play some quality instruments. Plus, their logo is a monkey in a cowboy hat, named "Monk Williams". I'm not sure how it could get any better than that.
Nitrocellulose lacquer is one of the great original-era Fender electric guitar finishes, and is still used today on select instruments. Thin, porous and delicate, it’s a premium finish prized for sonic qualities that let body woods breathe with their true tonal character, and for an appearance that ages and wears in a distinctive way appealing to many players.
This one SOLD pictured has been SOLD OUT: This is one of my favorite vintage Alvarez guitars and is always truly a very good surprise just how great these sound / impressive and I have collected more than several over the years of this very model vintage era lawsuit guitar in AMAZING Condition. Here we have a wonderful and very clean example of a Vintage Japanese Acoustic its a late 1970's great Alvarez 5056 with the most intricately detailed inlay work everywhere on the body.... the front & back in Abalone & the fingerboard is rich - dark and wavy grained it looks to be Brazilian Jacaranda Rosewood and has the Gorgeous Tree of Life in mother of pearl & abalone inlayed into the rich rosewood fingerboard WoW!,even the bridge has Mother of pearl inlaid, (you should have a real good look to come to your own conclusions if its something you like ) and the frets are in very good original condition... action is very good nice & low adjustable either way with no buzzing anywhere on the fretboard real nice playing example here folks.. The finish has a natural golden patina as seen to it and this guitar is strikingly beautiful. No cracks, no repairs, very good - excellent vintage used condition and is JVG rated at 9/10 WoW!... She's very EZ on the eyes to say the least and a premium performer this vintage piece has had over 33+ years to age and mellow and was a one owner California guitar in above better than average condition... no splits or cracks or separations or repairs ever... I believe this to be the cleanest best playing vintage 5056's we have ever had in JVG or seen for that matter. This one is a real pleasure to play! HERE IS A LINK TO CUT & PASTE TO SEE MANY MORE PICS OF THIS INSTRUMENT: .
List of acoustic guitar brands that include the most reliable models available. Acoustic guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson, and more. What are the best acoustic guitar companies? Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
While it might seem unnecessary, an EQ pedal is a very handy effect to have. Many amps have very specific voicing that can only be adjusted so far with their tone stack. Also, many small amps have limited on board tone-shaping options. For example, the popular Fender Champ 600 or the Blackstar HT-1, which only have one knob for tone shaping. With an EQ in your chain, you can fine-tune the amp to your liking, or you can perfectly dial in a distortion or fuzz that normally won't cooperate.
This workshop includes: lecture, demonstration and hands on experience in advanced guitar electronics.  Students will study alternate guitar wiring schemes demonstrated by instructor Scott Walker, and stereo wiring and Onboard Effects loop options will also be covered.  This class will focus on signal paths, diagrams, and component selection, in passive and active circuits.  Students will learn about basic preamp design.
The GRX70 showcases how good Ibanez is at producing great value guitars, they sure know how to keeps other guitar manufacturers on their toes. It has all the makings of a mid-tier instrument, complete with dive bomb capable bridge and great looking aesthetics, but packed inside a super affordable entry-level instrument. The basswood body with quilted art grain top is gorgeous, and a trio of pickups gives you tons of tones. A standard tremolo handles divebombing and other whammy acrobatics. This axe is perfect for burgeoning rockers who want a versatile guitar for all occasions. All in all, the Ibanez GRX70 gives you a whole lotta guitar for the money!.
The Hi-Flier guitar, which was possibly built in the Matsumoku factory, underwent multiple phases during the course of its production. Each of the Hi-Flier’s four manufacturing phases came with a variety of feature changes, ranging from simply switching the color of the pickguard to actually fitting the guitar for humbuckers rather than the P90-style pickups it originally came with.
15 years ago a friend brought his in Miami i think. The guitar sounds amazing and the care for making it was awesome. The guitar have a cristal like sound and shines particulary well. Today i've acquire it from him by a fair trade: i purchased a new Falcon guitar, wich is the best brand here in Peru, and trade it for his Palmer. Is the best trade i've done. Not sure for him ;) My friend paid $100 for it 15 years ago and the model is PF20. Hope this information was helpfull
Popularity also was a critical factor in our choices, although we generally passed over a few best-selling reissues or boutique clones in favor of the real deal. So even though the Bubba Bob Buttcrack Tube Overdrive may sound more soulful than an original Tube Screamer, if it’s little more than a copy with slightly upgraded components, it didn’t make the cut.

I commented earlier that the guitar amp is the instrument as far as the mic is concerned, but if the guitar is played in the control room with the amp itself in the studio (assuming decent separation between the rooms), a capacitor microphone close to the guitar neck may be used to capture the direct sound from the guitar strings. This sounds a bit thin and naff on its own, but sometimes works well in combination with the miked sound. A similar effect can be achieved by splitting the guitar output, feeding some of it direct to the console via a DI box and then either removing some low end or using an enhancer to exaggerate the brightness. DI'ing the piezo bridge pickups (where fitted) may also produce a similar result, and any of these techniques may also be used with guitar recording preamps as well as when miking.
Rarely have we come across a redesign of a classic instrument that is so thorough… yet still adheres so closely to the original! Neck shape, body contouring, hardware, pickups and electronics have all been under the microscope of Marr and his design cohorts in redesigning this short-scale offset classic. The new bridge design swaps the threaded rod saddles of the Jaguar for the bigger, solid, non-height adjustable Mustang saddles that sit flush on the bridge tray. The saddles just have a centre-placed string groove but this increased width means there's very little gap between the low E and the outer edge of the fingerboard the further up the neck you go. Marr has also ditched the traditional dual rhythm/lead concept. This Jag has just one circuit: standard volume and tone controls and a four-position lever switch mounted on the smaller of the three chromed plates. In position one, it offers just the bridge pickup; position two, bridge and neck pickups (in parallel); position three, neck pickup; and lastly position four, neck and bridge pickups (in series). We still have the slide-switch style of the original Jaguar to engage not one, but two, of the original's high-pass filters. The top switch is the master filter (up engages the cut); the lower switch, mounted at a right angle, only works on position four where forward is on (ie, it introduces the cut). Both these switches stick up less than the standard slide switches too, and are slightly more comfortable: typical of the thought and detail that has gone into this guitar. There's Fender-aplenty in the sounds but, as Marr says, Gretsch and Rickenbacker spring to mind, especially with a little tone roll-off. Above all though, the clarity, and the musical sweetness of the tones allow for complex chord voicings for jazzier rhythms or simpler soul and funk styles. The Johnny Marr Jaguar is a thorough redesign from the perspective of a very busy working guitarist. Aside from the low E being rather too close to the fingerboard edge in higher positions, it's faultlessly built for purpose, addresses five decades of 'Jaguar-ness' and puts a decidedly leftfield design squarely back in the mainstream.
Flanging: This effect involves mixing two copies of the same signal with one of them slightly phase shifted. Historically, it had its origin with studio engineers using reeel-to-reel tape recorders. They would make a copy of a tape and then feed the original and copy together to a recorder, having placed a pencil on the flange of one tape to slightly alter its speed. The slight speed change would not be enough to cause notable delay, but would be enough to cause the two waves to be "out of phase" with each other. The effect is described as a king of "swirling" sound, with notable pitch oscillations if it became more extreme.
Pickup configuration refers to the number and types of pickups installed on a guitar, and its position on the body. The two most common types of pickups include singlecoil, known for its crisp and punchy sound and the fatter sounding humbucker. For beginners, you'll have to once again look up to artists who play your preferred music genre, to see which pickups they are using to get their sound. In addition to getting the right sound, sonic flexibility is also an important consideration and the general rule is that the more pickups installed, the more sound varieties you can get. The most common configuration is HH, which stand for dual humbuckers, because of their overdrive and distortion friendly sound. The SSS (three single-coils) configuration is also popular, as seen on the Stratocaster, allowing for a more versatile tone options. There are other variations that combine both single coils and humbuckers, such as SSH (two single coils and a humbucker), for an even wider selection of tones.
I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.

In some ways, the Champion 20 isn’t quite as versatile as the other digital amps. For example, the Line 6 Spider Classic 15 has two effects selector knobs, allowing a guitarist to mix modulated effects such as phaser, flanger, and chorus with different types of reverb and echo. However, our panelists generally felt the Champion 20’s ease of use outweighed this disadvantage, and the Champion 20 does offer 12 different amp models as opposed to 4 on the Spider Classic 15. The Champion 20 also doesn’t play as loud as the Stage Right 611800, but all of our panelists thought it played plenty loud enough for beginners.
\n\n Harmony branded some of their old acoustic guitars with the Nashville\nname. \n\n There was a Japanese company called Nashville\nMusical Instruments NMI \n\n I have an acoustic guitar with no name on the headstock, and\na label inside that reads nothing but Nashville. I tracked down the information\non it once. It's a cheap guitar from the 80’s, made overseas, imported by a US\ncompany that sells children’s toys now. I can't for the life of me remember the\nname of that company now. I was searching for it, with no luck, when I found\nyour question. \n\n There is also the Nashville Guitar Company NGC based in\nInglewood, TN \n\n

The Lotus Vantage copy (Washburn Eagle, Aria Pro II Cardinal series, or Ibanez Artist) double cutaway (batwing) guitar with a solid body, 3 per side tuners on headstock, rosewood fingerboard with brass inlays, brass nut and neck-through construction (though there may have been a bolt-on model). This was usually finished in emerald green, polished mahogany or stained blue/white breadboard style and occasionally gloss white with 2 exposed humbucker pickups.

I play a Tele, but I can’t say I’m in love with it. I have this feeling that a Gibson would sound and play differently – perhaps warmer and more mellow – but I have no factual basis for thinking that. It is based more on who I have seen playing different models, and what style of music they are playing. This is what I think most of the differences guitarists imagine come down to – a lot of preconceived notions, reinforced by vague generalizations (like the ones in this article) and marketing hype. But I readily admit I could be wrong about that.

Acoustic guitar body sizes and styles differ between manufacturers. The C.F. Martin Company has been at the forefront of setting trends in body styles and sizes, and many companies have followed suit with their standards as a solid foundation,and altering their designs to creat custom sizes and styles. The following describes some of the common acoustic guitar body sizes and styles, and shares a little bit about the sound and tone profiles.   These profiles do not follow Martins standards to a tee, but do exhibit some of the most commonly used acoustic guitar body sizes and styles used, many having been influenced by the Martin Guitar Company.
The explanation for this "asymmetrical" tuning (in the sense that the maj 3rd is not between the two middle strings as say in the tuning of the viola da gamba) is probably that the guitar originated as a 4-string instrument (actually an instrument with 4 double courses of strings, see above) with a maj 3rd between the 2nd and 3rd strings and that it only became a 6-string instrument by gradual addition of a 5th string and then a 6th string tuned a 4th apart:
I gave some relief to the guitar, just enough to be able to move a business card on the 8th fret. I think the truss rod adjustment is ok now. Strangely it's still buzzing. I compared the height of the bridge to my Navigator N-LP-380LTD and i have the same height on the RLG-120 the same. The string that buzzes the most is the D string!!! E and A string buzz too but less than the D. Don't know if i want to raise the bridge more. G B E are ok! Don't know if the D slot on the nut is too low. Seems like the slots on the nut on my guitar are higher than the ones on your Burny. Don't know what to do. Frets seem even. Any chance it's the saddles or something? Do they play a role on buzzing. I will raise the bridge tomorrow morning and see how it goes. Any idea what should be a standard string height on these guitars? Lets say height on 1st fret, 5th fret, 8th fret, 12th fret, 16th fret, 22nd fret. Can we say that? Can you tell me yours to check with mine?
You've come to the right place.  We offer a wide range of vintage and used guitars and basses including a great selection of Fender instruments.   We're guitar players who recognize and appreciate how important Fender has been to the evolution of Rock and Roll.  Please browse our web site, give us a call or visit our Chicago show room.  We're constantly searching for Fender guitars, new gear is arriving daily and they often sells before we have a chance to list them on our web site.  
Distortion is a feature available on many guitar amplifiers that is not typically found on keyboard or bass guitar amplifiers. Tube guitar amplifiers can produce distortion through pre-distortion equalization, preamp tube distortion, post-distortion EQ, power-tube distortion, tube rectifier compression, output transformer distortion, guitar speaker distortion, and guitar speaker and cabinet frequency response. Because many factors beyond preamp distortion contribute to a particular guitarist's sound, recording engineers and PA system techs typically put a microphone in front of the guitar speaker, rather than only use the guitar amp's pre-amp out signal. A sound engineer or music producer may send the DI out signal from the pickups to a separate track at the same time, so they can re-amp the signal later. In contrast, it is fairly common to use a DI box with electric bass.
Those who appreciate a more vintage design will love the Schecter S-II CUSTOM. It’s an original design which borrowed a lot of ideas from Gibson’s legendary SG series. Pickups are also in line with the overall theme, and they sound pretty great. There’s balance in the tone, the kind you don’t really expect to get from a Schecter. It definitely took me by surprise, a very pleasant surprise.
While most think of the history of American guitars in terms of American manufacturers, if you’ve followed this column you know the tradition is much richer. Among the major players in the American market were the many importers and distributors who enriched the guitar landscape with instruments – usually at the lower ends of the market brought in from other countries, primarily from Europe, Asia, and to a lesser extent, Latin America. The analogy with automobiles is obvious. While we tend to think of the automobile industry in ethnocentric terms, it’s impossible to think of “cars in America” without considering Volks-wagen Beetles, Toyota Corollas or Datsun Zs (Yugos and Renaults deliberately ignored).
This list is an amateurish joke. Many guitars listed are pure cheap junk I'd toss in the garbage even if they were free. Take it from a 45-year Pro, Parker & PRS are the 2 highest quality. Fender, Ric and Gibson, along w/ brands that have stood the test of time, plus a few hand-made (custom) brands are the only ones you can seriously depend on. The rest are mostly pathetic attempts at copying a major brand and cutting the price by REALLY cutting back on quality. As they say: "You get what you pay for. "
The best way to have a great experience building your first guitar is to do it as a member of as class under the direction of a master Luthier. I built my first Tele-style guitar at Tulsa Wood Arts taught by Seth Lee Jones. You can learn a lot of the tricks and avoid some of the frustrations of doing it on your own. Plus, you make new friends and come away with a beautiful, quality guitar your first time out!
Neither should you confuse acoustic-electric guitars with semi-acoustic hollow or semi-hollow instruments. Acoustic-electrics are acoustic guitars with onboard electronics that allows them to be amplified. They can be played just as well without plugging in. Semi-acoustics are electric guitars with some acoustic properties that are meant to be amplified when played.
1966 Yamaha FG180 Nippon Gakki Japan crafted over 50 years ago early RARE light GREEN LABEL in top vintage condition WoW Now at JVGuitars we are very proud to present such a SWEET and RARE FIND folks... This is an excellent example of the Japanese Vintage Yamaha FG180 is from 1966 Folks that right an oldie but a real goodie for for sure she is about 51 years old and as you can clearly see from our high resolution pictures it has been very nicely taken care of for over 5 decades just for you today thats AMAZING!!! WoW She's one of the very first of the highly sought after original first FG180 run with its light green label FG180 prototype to the later 1970's FG180 Red Label, She's HERE NOW at JVGuitars its been Pro set up and polishing and is all round vintage excellent condition no cracks no issues no warps no pulling no funny business from what I see and thats a lot of guitars this guitar is far above average for such a vintage piece. she's in top playing condition and the cosmetics are very good as well with natural play wear and patina of such a well loved guitar. Here are the General Specifications Scale Length 650mm (25 9/16") Body Length 505mm (19 7/8") Total Length 1038mm (40 7/8") Body Width 412mm (16 3/16") Body Depth 100 - 118mm (3 15/16" - 4 5/8") Nut Width 44mm (1 3/4") Top Material Sitka Spruce Back Material Mahogany Side Material Mahogany Neck Material Mahogany Fingerboard Material Rosewood Fingerboard Radius R400mm (15 3/4") Bridge Material Rosewood Nut Material Urea Saddle Material Urea Bridge Pins Black ABS Tuners Open Gear (Chrome) Body Binding Rosewood + Cream + Black Soundhole Inlay White + Cream + Black Pickguard Black Body Finish Gloss Neck Finish Gloss Color Natural Case FREE Original Marigold lined Semi hard Chipboard case. This Rare FG180 has been treated with care and respect and love for 5 decades and someone is going to be very pleased in deed. To purchase this rare beauty. contact Joe at: quality .

Steve Albini, on the other hand, finds it useful to think in terms of blending 'bright' and 'dark' mics. "Normally I'll have two microphones on each cabinet, a dark mic and a bright mic, say a ribbon microphone and a condenser, or two different condensers with different characters." Eddie Kramer's discussion of his Hendrix sessions reveals a similar preference: "Generally speaking, it was either a U67 or a Beyerdynamic M160, or a combination of both, which I still use today. It might be slightly different, of course, but the basic principle's the same — a ribbon and a condenser."

Oh man.......... back to that Firebird 12. It is luscious. I have several tracks from 1973 where I used metal finger picks when tracking that thing and playing high up on the neck with a bit of compression.... heaven!!! I then did some standard chaka chaka rhythm parts with the 12 through a Marshall 50 watt.... heaven x 100. The guitar is SO comfortable to play, sits in ANY mix perfectly and dominates the "oooohhhh" factor with its sound. Please please please sell it to me!!!!!!
Double bass players playing in genres where a louder amplified tone (emphasizing the fundamental frequencies) is desired for the bass may be more likely to face the problem of audio feedback. Feedback for double bass generally manifests itself as a sharp, sudden high-volume "howling" sound that can damage loudspeakers. When acoustic instruments with resonant bodies are amplified with microphones and piezoelectric transducer pickups, the common approach used for amplified double basses, they are prone to have feedback problems. For acoustic bass guitars, soft plastic discs are available to block the sound hole, thus reducing feedback. Upright bass players sometimes use homemade foam or styrofoam inserts to fill in the "f" holes of the double bass, which can reduce feedback.
Strandberg: Extremely unique and of great quality, the guitars made by Strandberg belong to a league of their own. They have extremely unique neck profile called EndurNeck to facilitate comfortable playing, the EGS tremolo is way more stable and easy to tune than other double locking trems. The guitars made by them are ergonomically designed to minimise fatigue among players. Their custom-shop specialises in making made-to measure guitars which are built specifically for each consumer so as to perfectly match his or her playing style. Their custom shop also provides option for Cycfi XR pickups whose sound can be programmed by editing their frequency curve.
@Danny – As an EQ is used to filter and tweak the tone of the signal passing through it, this can be placed anywhere in the chain. For example, if you want to tweak the overall sound before the amplifier, place the EQ at the end of the signal chain. If you want to adjust the tone of your guitar before it hits your effects pedals, place the EQ at the front of your signal chain. It just depends on what you are planning on doing with the EQ and where in the signal chain it sounds best to you.
A Volume pedal is a volume potentiometer that is tilted forward or back by foot. A volume pedal enables a musician to adjust the volume of their instrument while they are performing. Volume pedals can also be used to make the guitar's notes or chords fade in and out. This allows the percussive plucking of the strings to be softened or eliminated entirely, imparting a human-vocal sound. Volume pedals are also widely used with pedal steel guitars in country music. It has also been used to great effect in rock music; the Pat McGee Band's live version of "Can't Miss What You Never Had" on General Admission illustrates what the pedal is capable of. Some volume pedals are:
Introduced in the late '90s, the PRS SE line was the company's entry into the already tough entry level market competition. With it, one can own a PRS guitar at a much lower price point, with the main difference being the country of origin, which for the case of the SE is Korea. The SE Standard line takes affordability a step further by having the production done in Indonesia, while still maintaining high quality standards.
By 1970, however, market conditions were changing rapidly. Japanese manufacturers had greatly improved their quality as well as their range of product offerings. Japanese labor at the time was much cheaper than American, and the imported guitars offered more "bang for the buck" than American ones. In a relatively short time, brands such as Yamaha and Ibanez were outselling Harmonies and Kays. The Japanese guitars had more comfortable neck contours and had truss rods that actually worked. The Japanese rapidly improved the quality of their instruments as well as the variety of their offerings such that by the mid 1970s, Harmony, Kay and Danelectro had all ceased operations, and Martin, Fender and Gibson had eliminated most of the low-end student models from their lines to concentrate on a price range well above any of the Japanese imports. I went to Japan in 1974 and attended a music trade show there as well as visited numerous factories and music stores. I was absolutely astonished at the variety of offerings available. Whereas in 1970 most Japanese guitars were low-end student models which often copied currently available new American products, by 1974 the more progressive Japanese manufacturers were well aware that many vintage American instruments were far superior to the new ones of that time. As a result some of these Japanese manufacturers stared to concentrate on studying vintage American originals. Fuji Gen Gakki and Tokai started producing extremely detailed copies of old Les Pauls, Stratocasters, Mastertone banjos and other vintage American acoustic and electric guitars and mandolins.
In the Popular Mechanics lab, we played the Xbox 360 version of Rocksmith 2014 with a pair of Epiphone guitars: The Les Paul Junior that comes with the game bundle, and a $1000 Les Paul Custom that the company sent us for testing, and which, sadly, we have to send back. The thing that sets Rocksmith apart from other rhythm games is the "Hercules" adapter. It's a cable that plugs into the output jack of any guitar or bass and connects it to your console via the USB port. You use the ordinary console controller to navigate menus.
A combination of standard 7-string tuning and an 8th string dropped one full step. Allows to play in the range of a standard electric bass, as well as power chords. Used by Animals as Leaders[47] and Whitechapel (on the songs "Devolver" and "Breeding Violence" from A New Era of Corruption). Also used by Deftones on Koi No Yokan and Gore, Allegaeon, and Emmure on the song "N.I.A. (News in Arizona)". A variation of this tuining is used by Hacktivist with 3rd and 4th strings tuned a whole step up to A and E respectively.
Some guitarists find spectral overtone melodies inside sheets of feedback (see: Lou Reed’s Metal Machine Music, Sonic Youth), but British wunderkind James Blackshaw uncovers them in careful stacks of 12-string acoustic guitars and bright orchestrations. Minimal in his attack and classical in his drama, Blackshaw bears the acoustic guitar torch in the 21st century, his pieces unfolding in slow, formal shifts until they beam like a burning light through stained glass.
Across the United States, there are increasing concerns from businesses about the supply of science, technology, engineering, and mathematics trained workers. Although science and math test scores in the US are among the lowest around the world, the US educational system is in the process of revitalizing the “hands on” learning techniques as a way to enhance the participation and success of students. Our project meets the needs of applied learning with the flexibility of being modular in the classroom.
One cool thing about liking oddball old guitars is they always contain hope…and a challenge. By which I mean, no matter how obscure or exotic, you always live with hope that you’ll someday figure out what the heck they are and thrive on the challenge of trying to do so. At least that’s been my repeated experience over the last quarter century or so of playing guitar detective. That being said, this 1967 Apollo Deluxe was kind of the exception that proved the rule, in that it followed a reverse pattern, sort of backing into discovery.
Another popular modification is to reverse the electric polarity of one of the pickups (or one coil of a dual-coil pickup). When two pickups are selected, this produces a very thin and weak sound, due to phase cancellation between the pickups.[21] The closer the pickups are to each other, the greater the cancellation and thus the weaker and thinner the resulting sound. In case of a humbucker this results in a sound that is so weak as to be almost unusable, as well as the loss of the pickup's hum-cancelling properties (due to the coils being magnetically out-of-phase, but electrically in-phase with each other).[22]
Instruments with built-in effects include Hammond organs, electronic organs, electronic pianos and digital synthesizers.[19] Built-in effects for keyboard typically include reverb, chorus and, for Hammond organ, vibrato. Many "clonewheel organs” include an overdrive effect. Occasionally, acoustic-electric and electric guitars will have built-in effects, such as a preamp or equalizer.[20][21]
In ’71, Univox introduced what are arguably their coolest-looking amplifiers, the B Group, covered in nifty two-tone blue vinyl. Remember, this was the tail end of the heyday of Kustom, with its colored tuck-and-roll amps, and the two-tone blue with a red-and-white oval logo was boss. The lettering was the same uppercase blocks as on the outline logo. These new Univox amps were hybrids, with solidstate power supplies and lots of tubes – lots! The Univox B Group had two combo and two piggyback guitar amps, two piggyback bass amps and a piggyback PA. It is not known how these were constructed, but because previous amps had Japanese chassis put into Westbury-made cabinets, these were probably built that way also.
Tuner: If you’re new to guitars and playing music, there is absolutely NO way that you know how to recognize all the notes by ear and tune your guitar without a tuner. Even if someone tunes the guitar for you at the shop, it will get out of tune by the time you’re home, so this one’s an absolute must have. Hang on for the price until we discuss the next device.
We indicate and report to EMS Worldwide Express mail service that the guitar is sent with a lower declared value than the purchased price and as a gift so that there will be a possible exemption on custom clearance fees, taxes or you may need to pay a little amount but it is necessary, or the custom will open the package and revalue the guitar. Based on our experience, the custom fees in the Europe, USA, Canada, Australia and Asia are very minimal since we declared the guitar as a gift and lower purchased price in order to lessen the custom fees or even possible exemption and we have not received complaints from our valued customers regarding custom fees, taxes and tariffs.
Fender is the world’s leading guitar and amplifier manufacturing company, serving the industry since 1946. It is one of the best guitar brands in India for electric guitars. The Solid-body, Spanish-styled electric Telecaster guitar and Stratocaster are some of the most popular electric guitars today. Fender has made a mark in the Indian guitar industry with its high quality products. The price varies from mid budget to high budget. It markets under the brand names of Fender, Squier, Charvel, Gretsch, Jackson and EVH also.
Lutherie has been my life's work since the beginning. After graduating from Roberto-Venn School of Lutherie in 1992, I set up my first shop in a rental garage, and began designing, building, repairing, and restoring fretted stringed instruments. Aided and abetted by 13 years of employment as a staff guitar repairman at Seattle's Trading Musician, I gained an extensive knowledge of the inner and outer workings of a vast array of instruments.
A partial PA is harder to define, but it's essentially any PA system that doesn't have the capacity to mic your whole band. More often than not, in these situations, mics end up on the kick drum and snare drum for the reasons outlined above. In this case, it does help to have a little extra juice in your amplifier, but try to keep it tamed, nonetheless.

Some guitarists design or modify their own pedals. Others use a combination of off-the-shelf effects. Kurt Cobain stomped on Electro-Harmonix Big Muff and ProCo Rat pedals to create his classic loud-soft-loud, "Nevermind"-era sounds. John Mayer kicked off his 2003 hit, "Bigger Than My Body," with see-sawing, arpeggiated sounds from his Roger Linn AdrenaLinn III pedal. There are hundreds, if not thousands, of different stomp boxes. Although there's a certain amount of gray area and overlap, pedal effects can all be divided into four general categories:

The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals start with all-too-similar circuitry – you need the input and output jacks, the bypass switch, and a barrel jack for power input. In some pedals, there may be as much wiring involved in the jacks and switch as there is in the effect itself. The SparkFun Proto Pedal takes care of the hard part and provides you with a simple infrastructure; all you need to do is decide what simple circuit to make to gain your desired effect, and you’ll be ready to rock!
Now that we’re comfortable with the basic wiring of a guitar, we can look at some of the more popular mods. This article introduces mini toggle switches and push/pull pots, and shows how we can use these to modify a Strat in such a way as to allow use to add the neck pickup to any selection. This expands the number of available pickup combinations to 7.
Fuzz is an indistinct, nasty overdrive that is synonymous with Jimi Hendrix. The Dallas Arbiter Fuzz Face is the most famous fuzz pedal, known for the way is breaks up and adds something special to any guitar tone. Fuzz pedals are most commonly used on top of clean or lightly overdriven tones, as this is where the character of the pedal can really come through; used on top of already distorted tones they can be great for making a load of noise! Two main types of fuzz are available – silicon (which sounds softer and more rounded) and germanium, which sounds harsher and more treble-y.
There is a weekly newsletter that features lessons from different genres and difficulty levels. Whenever I open that newsletter I feel compelled to try out that featured lesson. I believe that this is a big reason why my guitar playing is improving so quickly. I am continuously trying out different styles and techniques and I get better overall while doing this and having fun.
Seller: musiciansfriend (269,349) 99.5%, Location: Kansas City, Missouri, Ships to: US, Item: 163232174143 Home Guitars Percussion Accessories Alvarez RP266SESB Parlor Acoustic-Electric Guitar Sunburst Sunburst item# 1500000019429 New The Alvarez Regent Series is a high-quality, entry-level guitar line designed to provide superior instruments with many features and specifications you'll find in pro-level Alvarez models. Components such as the bi-level engineered rosewood bridge, scalloped bracing and PPS synthetic bone nut and saddle, work together to get the best tone and response possible. Regent Series has also been designed with the student in mind and has a slightly slimmer neck profile and nut, making it very easy to hold and fret. This guitar has a roadworthy, vintage vibe with a satin finish. This is a great looking guitar and for its size has a very open and warm voice. It is fitted with the Alvarez SYS250 from B-Band, a 3-band EQ with onboard digital backlit tuner. Shipping Orders are generally shipped the following business day after payment is received. For example, if your order is placed AND paid for at 1 p.m. Eastern Time on Friday, Musicians Friend will ship it on Monday. We are only shipping eBay orders via standard ground shipping at this time (3-7 business days for delivery once the item leaves our warehouse) Payment Musician's Friend only accepts payments for eBay orders through Paypal. Immediate payment is required upon selecting "Buy It Now". Sales Tax We are required to collect sales tax on all orders shipped to Alabama, California, Connecticut, Hawaii, Illinois, Indiana, Kentucky, Maine, Maryland, Michigan, Minnesota, Mississippi, Missouri, New Jersey, North Dakota, Utah, Vermont, Washington and Wisconsin. You will be charged the state and local sales tax rate for any orders shipped to these states. Colorado, Oklahoma, South Dakota, Louisiana, Rhode Island and Pennsylvania Residents: Musician's Friend is not obligated to, and does not, collect sales tax in your state. Your purchase is subject to sales/use tax in these states unless it is specifically exempt from taxation. The purchase is not exempt merely because it is made over the Internet or by other remote means. These states require that you file a sales/use tax return at the end of the year reporting all of the purchases that were not taxed on those purchases. Retailers that do not collect sales tax in these states are obligated to provide purchasers an end-of-year summary of purchases in order to assist them in filing their tax report. Retailers that do not collect sales tax in these states may be required by law to provide the Department of Revenue with an annual report of the total amount of all of your purchases above certain thresholds. Details on how to file this return may be found at your applicable Department of Revenue website. Store Policies If you’re not satisfied, neither are we. If for any reason you’re not completely satisfied with your purchase of a new item, simply return it in its original condition within 45 days of purchase (see exceptions below) and we’ll give you a full refund. It’s that simple. Returned items must be in original, brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings or scrapes on the instrument or collateral materials. Items must also include all original packaging, manuals, warrantees and accessories or your return may be subject to a return handling charge. Your refund will be promptly processed upon successful evaluation of your returned item from our trained category professionals in 2-3 business days. Refunds are made for product value only, excluding shipping and handling charges. If you received Free Shipping on your order, the value of the uncharged shipping cost will be deducted from your refund. Exceptions Additionally, the following items are returnable only if defective OR unopened - strings, reeds, computers, tubes, earbuds, earplugs, recorders, tin whistles, flutophones, "world" wind instruments, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluid, clothing/footwear, body jewelry, sheet music, cleaners, polishes and polishing cloths. Software/soundware, books, CDs, DVDs, and videos may be returned for credit only if they are in their original, sealed packaging. All returned woodwind and brass instruments incur a $10.00 sanitization fee. Returned bows are assessed a $4.00 restocking fee. Returned mouthpieces priced over $300 incur an $8.00 sanitization fee; the fee for mouthpieces under $300 is $4.00. Stringed instruments priced at $1999.00 or more, must be returned within 10 days of shipment. Should you decide to return your shipment, please follow the return steps printed on the back of your invoice and pack your return carefully to prevent damage in shipment. All returns must: 1. Include a Return Authorization Number; (Please contact us via eBay messages for an RA number) 2. Be in the original packaging complete with all collateral materials such as cases, straps, cables, care kits, certificates of authenticity, warranty cards, manuals, and any other materials that originally shipped with the instrument; 3. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials. Condition: New, Brand: Alvarez, MPN: RP266SESB, Features: Features: Mahogany Top / Vintage Sunburst See More
Guitar Tricks is a step-by-step learning system that’s designed to make learning guitar easy. The Guitar Fundamentals level 1 training curriculum has been totally reworked, improved and only recently re-released. Nothing else is as beginner-friendly as Guitar Tricks. In addition to working your way through the fundamental lessons of the Core Learning system you can explore great songs arranged with beginners in mind.
An amazing electric guitar player pack that is suitable for use by beginners. It has a mahogany body, with its fret board having been made from rosewood. The neck is also made from mahogany. Most interestingly, it comes with passive fienzo pickups, and an exclusive guitar player pack with gig bags, strap, cord, tuner, and an instructional DVD. It is well design to assist the beginner to better access the frets and practice through to perfection. Prices range from INR 12,650. Find it on the link below:
In 2008, Gibson USA released the Slash Signature Les Paul Standard, an authentic replica of one of two Les Pauls Slash received from Gibson in 1988. It has an Antique Vintage Sunburst finish over a solid mahogany body with a maple top. Production was limited to 1600.[35] The Gibson Custom Shop introduced the Slash “Inspired By” Les Paul Standard. This guitar is a replica of the 1988 Les Paul Standard and it features a carved three-piece maple top, one-piece mahogany back, and rosewood fingerboard, with a Heritage Cherry Sunburst finish. Two versions were made available—the “Aged by Tom Murphy,” aged to resemble the original guitar (a limited number of these were signed by Slash in gold marker on the back of the headstock), and the “Vintage Original Spec,” created to resemble the guitar as it was when Slash first received it.[32][36]
Guitar techs specialize in stringed instrument technology, providing support for all issues relating to electric and acoustic guitars. They might work in music shops repairing, tuning and finishing guitars for customers. Techs may also be hired by bands to maintain and prepare instruments before, during and after shows, including the set-up, stringing and tuning of guitars, bass guitars, pedals, cables and amplifiers. Additional responsibilities include instrument shipment between shows and maintenance during recording sessions. Securing employment with a band may be a competitive endeavor, and travel is often required for those positions.
Here for you is a beautiful Vintage 1964 Epiphone Frontier FT-110 acoustic guitar. This guitar is 100% original and comes along with it's original hard shell case. The guitar plays and sounds just great. These Epiphone guitars were made with a full 25 1/2" scale. The sound is just outstanding and the playability is fantastic. If you have any questions, feel free to either email us at or call .
At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.
Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.
Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you are looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.
There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.
Taylor’s 214ce Grand Auditorium acoustic guitar has undergone a few changes over the years. One of the latest improvements added in 2017 concerns the wood used for the body. Because of the restrictions on the importation of rosewood, Taylor no longer uses it for their 200 series of guitars, which the 214ce is a part of. Instead, the company used the next best wood for a great, balanced tonal response: Hawaiian koa.

We selected this guitar as our Top Pick because it’s an instrument that could suit anybody. It has everything you need from your electric guitar and it’s easy to play. A good classic that will stay with you for many years to come. It suits both beginners and guitarists who have been playing for a while. True, a professional guitarist would buy something pricier, but if you’re not super picky this guitar will do perfectly well!

The Schecter Hellraiser C-1 Electric Guitar features a solid mahogany body that guarantees durability, along with a set-neck having ultra access. There is hardly a guitar which sounds great in regular, single-coil configuration, also in humbucker mode, but that’s what the Schecter does; having excellent sustain. The set of this guitar was great out of the box, while the fingerboard is good, smooth and quick.
Every time I guitar shop I come back to Gibson. Pricey, but the look, feel and tone are to my tastes. A lot of classic songs have been recorded over the years on these guitars. Are they superior to Martins or Taylors? It's a matter of preference. I own a hummingbird custom and the aesthetics, tone and feel are unsurpassed, but it doesn't "cut" like a Martin. For chording though, it's a better balance. I also own a J-45 which is the ultimate acoustic blues guitar.

Eric Clapton was in a bad mood during the photoshoot for Blues Breakers. The 1966 Clapton/John Mayall collaboration sees Clapton on the album art reading a copy of UK comic book the Beano. He was so aghast and bored by the idea of a photoshoot that day that he refused to make eye contact with the photographer, therefore settling on staring at a comic instead. Nicknamed “The Beano Album”, it’s often considered to be one of the most important guitar recordings ever made.
There are several aspects that make the acoustic guitar different from the electric one. The most notable difference is the fact that the acoustic types do not need a source of electricity or rather they do not have to be plugged in for them to be heard. They are relatively large and are built with a hollow chamber for the magnification of the guitar’s resonance thus giving out sound that originates from the plucked strings. It also has a bridge that is essential for the transmission of vibration of the strings to the body. They are self contained, needing minimal preparation to play. In other words, they are the guitars to be bought by all those looking for simplicity.
One of the most important Telecaster players was Clarence White, who, during his short career, contributed more to country electric guitar than almost anyone else, along with being a phenomenal bluegrass flatpicking guitarist and a pioneer of thecountry rock genre. He played with the Byrds, and Nashville West along with the bluegrass bands the Kentucky Colonels andMuleskinner. He enlisted the help of Gene Parsons and invented the StringBender, a device inside the body of the guitar that raises a string’s (either the B- or G-string most of the time) pitch when pressure is applied to the strap. His Telecaster is one of the most recognizable and is now owned by Marty Stuart.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Molla principale Vite di arresto Blocco tremolo Barra di arresto Con la chitarra accordata con precisione, regolare la molla principale assicurandosi che la barra di arresto tocchi il blocco tremolo e la vite di arresto. Se la barra di arresto non tocca il blocco tremolo e la vite di arresto, ruotare la vite di regolazione della molla principale finché...
One special effect I used quite a lot in analogue studios, but which is surprisingly tricky to implement in a lot of software sequencers, is where you feed the left and right outputs of an auto-pan effect to two different effects processors. With this setup, the outputs of the two effects can then be mixed together to create a variety of different modulation-style treatments. This patch always worked well in a send-return loop with a pair of phasers, especially if you also EQ'd the two returns wildly differently. The same setup used as an insert could do great things with distortion and ring-modulation processors, and if you were feeling really adventurous, you could fiddle with the panning rate in real time while mixing down. Mike Senior

Being a grand auditorium body shape guitar, it’s a little smaller than the typical dreadnought size that we’ve covered several times on our list. That’s no bad thing, and allows this guitar to be nice and flexible, especially when combined with the ‘Expression’ electronics system that allows for some good tonal customisation. Match up with an effective wireless instrument system.

The Fender Tele Jr. is a variant of the Fender Telecaster electric guitar that the Fender Custom Shop produced in a limited run of 100 units in the early 1990s. It uses a Telecaster body shape, scale length, and electronics controls (albeit, with a reversed control plate). However, many of its construction and electronic features—for example its set-in neck and P-90-style pickups—are similar to those of a Gibson Les Paul Junior (hence the name) and Gibson Les Paul Special electric guitars.
With a delightful dreadnought shape, this steel-string acoustic is made with a pressure-tested solid cedar top, with solid mahogany back and sides, all with a semi-gloss custom polished finish that allows the guitar to sing – and sing it does! The tonewoods combine to deliver a rich and bright sounding instrument, with plenty of warmth that would please the most demanding of guitarists.
All of the complex air-coupling interactions, along with the resonant properties of the tonewoods themselves, are a key reason that different acoustic guitars will have different tonal qualities. The sound is a complex mixture of harmonics that give this type of guitar its distinctive sound. Some of the most important varieties are the classical guitar (nylon-stringed) and steel-string acoustic guitar.
While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally.
A batch of 20 to 30 guitars featuring Ripley’s electronics was assembled using Japanese bodies and necks. The one in our possession is a GS2-R (#28949) with a standard (no German carve) Strat-style body, bolt-on multilaminate neck made up of red-dyed 1/16″ maple strips glued end-to-end, pointy-droopy carved bi-level six-in-line headstock, Gotoh tuners, black hardware, 24-fret ebanol fingerboard, faux-pearl pennant inlays and locking Ovation Floyd-Rose-licensed vibrato system. Two plastic-covered humbucking pickups (no exposed poles) featured individual output controls for each string, with six individual three-way mini-toggles for selecting pickups combined with six fader pots directing string/pickup output to a stereo jack.
Basicly it is a HD digital sound interface plus with a MIDI controller and footswitch. It is has unique design with different HOST mode and switching MODE to work with the host softwares. We are proud of that it is now maybe the best thing you can find to use on stage with software FX. The special designed analog signal chain mixing with the digital codec give the best dynamic response and sound quality. We did AB with lots of other interface and be so confident on its performance.
The better-quality Japanese guitars of the mid 1970s to the present have rivaled the quality of many new American guitars of the same time period. It is worth considering, however, that the 1970s were almost without a doubt the worst period in the history of American-made guitars as well as numerous other American manufactured products. I am firmly of the opinion that no Japanese maker has equaled the quality of pre-World War II Gibson and Martin acoustic instruments or electric guitars by Gibson and Fender of the 1950s through the mid 1960s, but I would be quick to agree that a Tokai or Fuji Gen Gakki top-line instrument of the mid 1970s would be in many cases every bit as good and in some cases superior to Norlin-era Gibson and CBS-period Fender guitars. While "Made In Japan" had a connotation of cheap and mediocre quality in the 1960s through the early 1970s, by the end of the 1970s "Made In Japan" was often viewed by consumers of guitars and other products such as automobiles as being as good as if not superior to American. Some of the Japanese instruments have gone on to be viewed not only as being of fine quality but worthy of consideration by collectors. While I personally do not collect Japanese made guitars and do not deal large numbers of these instruments, I would certainly agree that many of them are of excellent quality and provide good value.
I just noticed that no-one has mentioned Robben Ford – another master of both technique and taste and a certain contender for my top ten list, fighting for a place in the same space as Larry Carlton and John Scofield. (John Mayer can certainly play, but for me, any of those three offers at least as much technique, and a wider range of accomplishments, than JM – check out their various versions of “I don’t need no doctor”).
Fire Guitar Tuner tunes your guitar in seconds. This tuner tunes makes it easy to play in perfect pitch all the time and eliminates any need to buy those expensive microphone tuners at the music shop. Play a note, and this guitar tuner will display it. And once you''re in-tune, Fire Guitar Tuner will incinerate your mind as it lights ablaze in this Tuner''s fabulous glow animation. Why spend money on a guitar tuner when you can have one for free ?
If you are not shopping online, then get to the nearest local instrument store and try out different guitars by playing them while switching between different positions in standing and sitting down. Plug them in and turn them on. Stand in front of a mirror with them on hand. Try holding it up like George Harrison, and downwards like Slash. Its different tires for different cars—so there are no hard and fast rules, but your eyes, hands, and ears will tell you what suits you best.
Ibanez are a Japanese musical instrument company. Although Yamaha is a better known Japanese musical instrument company, Ibanez exceeds expectations for electric guitars. This brand of guitars stands out in the world of rock guitars. They gained popularity in the 1980s when they introduced their original designs for guitars based on Steve Vai’s JEM Universal. Their designs have since become some of the biggest selling metal guitars. The Ibanez guitars are used by guitarists such as Steve Vai, Paul Gilbert, and Joe Satriani. In addition, Ibanez guitars tend to be very affordable, giving you a great guitar for a cheaper price.

The distortion effect was first created back in the 1950's by overdriving the tubes of a guitar amplifier, usually by turning an amp all the way up. This caused the guitar signal to distort or "break up." While this effect was originally considered bad by amp manufactures, early rock players found it exciting since it provided a new tone for the electric guitar's sonic palette. A tone that had an edge and power that fit perfectly with the new type of rock playing that appeared in the 1960's. As amplifier manufacturers embraced distortion, they began adding more gain to their amps, which resulted in more distortion and lead to styles such as metal and shredding. Pedals have been created to simulate all these types of distortion.
Indeed, the Adamas was not the only technological exploration conducted by Ovation. In 1973, as the threat of copying loomed, Ovation decided to manufacture its own inexpensive “copies.” Launching a full-out research effort Ovation came up with new bowl materials, a new way to make tops, and a new neck construction based on more technology used on the helicopter side.
Over the years in my travels, I've seen more Peavey amps on real working musicians' stages than any other amp manufacturer. The fact that real, everyday working musicians use and depend on them also dictates that Peavey amps are out there making more money for real working musicians in total, than any other amp out there. Yes, I know, the big act shows have huge backlines of Marshalls behind them, but they are in the minority, as there are more lesser-famed bands and musicians out there working than there are "stars". I "stepped down" to Peavey almost 20 years ago, when I was beginning to have reliability issues with my Fender amps...issues I couldn't afford to keep having while on the road. I still have my old Fender amps, but I've been gigging regularly and exclusively with only Peavey for the past almost 20 years now. I still get the tone I want and need and the reliability I expect in order to keep making a living in music. And by the way, I've been gigging since 1963.
Like in the overall best-selling list, there are a few amps on this list which have been discontinued but continue to sell very well on the used market. Part of the reason these amps rank so high on our lists is that Reverb is one of the only places these models are still being sold, meaning that our sales likely account for a sizable chunk of the entire used market for these particular amps.
{ "thumbImageID": "Nita-Strauss-JIVA10-Signature-Electric-Guitar-Deep-Space-Blonde/L19851000001000", "defaultDisplayName": "Ibanez Nita Strauss JIVA10 Signature Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Deep Space Blonde", "sku": "sku:site51500000216212", "price": "1,499.99", "regularPrice": "1,499.99", "msrpPrice": "1,999.99", "priceVisibility": "1", "skuUrl": "/Ibanez/Nita-Strauss-JIVA10-Signature-Electric-Guitar-Deep-Space-Blonde-1500000216212.gc", "skuImageId": "Nita-Strauss-JIVA10-Signature-Electric-Guitar-Deep-Space-Blonde/L19851000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
For a slightly more distant, but fuller sound, bring up the fader on the mid- distance mic. Slowly add that signal to the close sound described in the previous paragraph. You'll have the detail of the close mic, but with the fullness that comes with adding some "room" sound to it (just like sitting in the tenth row). This is a pretty standard approach that will give you a pretty standard rock guitar sound.
The newly designed Les Paul Recording guitar was released in 1971, in many ways as an updated version of the Les Paul Professional that had debuted two years earlier in 1969. The new guitar came with a new owners manual explaining the (somewhat complicated) controls, their operation, and giving other specifications, including recommended strings, action and control settings. Compare with the broadly similar owners manual for the Les Paul Personal / Professional

I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.

About the only thing that all these producers have tended to agree on across the board is that you should try to get your guitar sound as good as you can before you even think about recording. "The stupidest thing that any musician can do," remarks Tony Platt, "is to just plug in and play and say 'make that sound good'. It doesn't work like that. I will always say to the guitar player, for instance, 'Is that sound coming out of your amplifier the sound you want to hear? If it isn't, show me what it is and we'll try to get somewhere close to that before we even put a microphone on.' It's a waste of everybody's time to sit there tweaking stuff until somebody says 'Oh that's good.'"
Bottom Line: The Boss ME-80 seems to be aimed at the beginner and intermediate guitarist who is getting into the effects game. What guitarists love about it is that it tries hard (and succeeds) at replicating the feel of messing with a pedalboard full of effects. Unlike the Line 6 POD HD500X, you won’t need the manual! We’re not necessarily taking a dig at the Line 6 pedal - that one very much has its merits, is FAR more customizable and editable, and arguably the effects and amp modeling sound a bit better. The Boss ME-80 is just a different style, and judging by the user reviews we read people really enjoy having all the knobs for all the effects immediately available. The Boss ME-80 is also a tremendous bargain considering how powerful it is. Sure, it’s not exactly cheap, but it’s a very well-made, intuitive, nice-sounding all-in-one multi-effects pedal which is great for practice, studio recording, and live use.
Your circuit shows a conventional RC tone control with a further small capacitor wired directly across the pickup. If you regard that extra cap, not as an additional component, but instead as the self capacitance of the pickup, which is normally a few hundred pF, then your circuit is already present in almost all electric guitars. OK I realise I’m being a bit smartarse here, it did strike me as another way of looking at this.
Use songs as vehicles, certainly, and have fun playing them, by yourself, with friends, but get to realise that knowing what one chord sounds like after another will help you to play a new song almost spontaneously - a great trick to impress. Just learning songs will not give you much of a clue how music actually works, so you're better off using them to help learn music. obviously, you'll learn some songs to play along to, or with mates, but that's not the be-all and end-all. And it's not only the chords: learn pentatonics and you'll realise how many great guitarists use them in solos. Gilmour, Clapton, etc. Sunshine of your Love is pure blues scale notes!
Previously, Epiphone guitars were considered to be the biggest competitor of Gibson. However, they were later acquired by Gibson who has retained the name of this brand to distinguish them from their pricey brothers. You can certainly consider it a budget-friendly production from the high-end guitar makers. Epiphone, just like the Gibson’s Les Paul, shares the same design but is available at a much lesser price. When it comes to craftsmanship, then we must say that Gibson is much better than this one. Unfortunately, Epiphone utilizes low-quality products such as mahogany and other electronic components.
It is rare for any brand, let alone an entire company, to stay in business this long and their longevity speaks volumes to the exceptional quality of their instruments. Although they did dabble in electric guitars and basses for a short time, today the company is dedicated to making the finest acoustic guitars possible just as they were over 180 years ago.
This deal leapt out of the page at me straight away. The Fender Squier series has been around a while and even though it’s a budget guitar, you can always rely on Fender for great quality. But what I like the most about this package is that everything you need is included (apart from a guitar stand) and the Frontman 10G amplifier has some extra features that are excellent. The amp has an input for a playback device to jam along to (like your iPad or Smart phone, or even a CD player) plus a headphone output for when the neighbours get too annoyed. A Gain control and Overdrive switch let you grunge everything up, or you can dial it back to a classic, clean Fender sound.

225 Parsons St, Kalamazoo, MI, 49007 1917–1984 Also located next to railroad tracks, this facility had major expansions in 1945, 1950, and 1960.[83] Various brands were produced there, including Gibson, Epiphone, (1957–1970)[84][85] and Kalamazoo. During the depression of the 1930s, children's toys were produced there, and during WW2 it produced materials to support the war effort in addition to producing guitars.[86] Between 1974 and 1984 Gibson moved its manufacturing out of this facility to Tennessee. Most of this move happened in 1974, leaving only acoustic and some semi-acoustic production for this plant.[87] In 1985, Heritage Guitars began production, renting part of this facility.[88]

Russell, George (2001) [1953]. "Chapter 1 The Lydian scale: The seminal source of the principal of tonal gravity". George Russell's Lydian chromatic concept of tonal organization. Volume One: The art and science of tonal gravity (Fourth (Second printing, corrected, 2008) ed.). Brookline, Massachusetts: Concept Publishing Company. pp. 1–9. ISBN 0-9703739-0-2.

In the 1980s, when shred metal was at its peak, Ibanez took a big share of the market with models that were geared towards the fastest, loudest players – thin necks, floating double-locking tremolos and high-output pickups. These guitars were endorsed by modern day virtuosos such as Paul Gilbert, Steve Vai and Joe Satriani, with many artists designing their own custom Ibanez models.

I have an acoustic that I bought from a lady I know who said she has had it since the early 70's. It says 'Maya' on the headstock and the reinforcement rod cover is stamped with 'Takamine'. The sticker inside the sound hole says 'Maya', "We made this guitar for the people who love guitar music", Made by Takamine, Model No. TF1o1S, Japan. On the inside of the sound hole at the top, the wood block there is stamped with 46.6.3. The guitar is only about 3 1/4 inches deep and approx. 15 inches wide at its widest spot. Small guitar with a big beautiful sound.

Specifically, the book includes exercises to focus on sweeping, alternate picking, string skipping, and bending in addition to arpeggios and legato. Keep in mind, this book builds on the skills you’ll learn and practice along the way. Having said that, intermediate players can jump a few chapters and still get a ton of value out of the guitar exercises in this book. In that way, it really can function as a choose-your-own-adventure type way to learn guitar that matches your current skill level.

Kaman began producing guitars in 1966, and Charles went on the road to promote his new creation. His first stop was a visit to his old stomping grounds, Washington, D.C., where he showed his guitar to jazz guitar great Charlie Byrd. Byrd was impressed and felt the guitar – which was quite loud – had considerable potential. He later remarked that the guitar “deserved an ovation,” thus providing the guitars with a name.

I have a weird Decca guitar that my father-in law gave me. I know nothing about it. It is an acoustic, obviously old and it has 10 strings! The neck is normal and the first 4 strings E,B,G & D are in sets (like a 12 string) and the Low E and A are single. I play guitar and have never run across anything like this. I can't find information on it anywhere! I can't see where anyone customized it. It looks like it was originally made that way. Any thoughts or information you can give me on this?
The United States Department of Justice found emails from 2008 and 2009 in which Gibson employees discussed the "gray market" nature of the ebony wood available from a German wood dealer—who obtained it from a supplier in Madagascar—as well as plans to obtain the wood. It filed a civil proceeding in June 2011,[40][43][44] the first such case under the amended Lacey Act, which requires importing companies to purchase legally harvested wood and follow the environmental laws of the producing countries regardless of corruption or lack of enforcement.[44] Gibson argued in a statement the following day that authorities were "bullying Gibson without filing charges" and denied any wrongdoing.[39][45] Arguing against the federal regulations and claiming that the move threatened jobs, Republicans and Tea Party members spoke out against the raids and supported Juszkiewicz.[46]
The V40 expands the elusive low-to-medium gain range, putting a wide spectrum of subtly shifting overdrive textures under your fingers. There are rotary controls for gain, EQ and master volume. The real fun starts with a two-position voice switch, which subtly changes the V40's character. Voice 1 is centred more on the early 60s 'blackface' tone; Voice 2 is edgier and a touch more aggressive, evoking the tweed amps of the 1950s. A small toggle switch called 'mid kick' adds a touch of extra gain in the midrange, not least to give weedy single coils a lift for solos. There's also a digital reverb with a front-panel level control and on/off switch. Then there's the standby switch, which has two 'on' positions for high power (approximately 40 watts) and low power (seven watts). This switch also works in the V40's single-ended mode, offering a choice of around 1.5 watts in the high-power position and 0.5 watts in the low-power setting. The V40's sonic palette made us sit up and take notice. By reducing the gain, all the mildly overdriven and chime effects normally squeezed into a fraction of the gain knob's travel now occupy the whole range. The V40 Duchess is a unique design - many of its competitors feature high-gain lead channels, teamed with high headroom and often uninspiring clean channels. By focusing on those often-overlooked but highly effective low-to-medium overdrive sounds, the V40 has effectively carved out its own niche, and looks set to become popular for blues, roots, jazz and country players.
While high action is a concern, I see more people on guitar forums who bought Authentics, including the 1941, who say the action and playability is “like butter” more than I see people mentioning high action being a problem. Also, a lot of players rarely go beyond the fifth fret without a capo, so they may not even notice if their 10th fret would seem high to some players.
Naturally, it all comes down to manipulating the effect to fit the occasion. There is definitely such a thing as too much reverb or not enough. However, this is the type of thing you will have to figure out on case to case basis. With that said, you would be surprised at just how often reverb is used in music these days. Some sound engineers and producers like to be subtle to a point where you won’t notice the reverb unless you are actively looking for it. Others tend to go overboard in order to express themselves.
Since they present a finer break point at the neck end of the strings’ speaking length, narrower vintage-gauge frets are generally more precise in their noting accuracy. From this, you tend to get a sharper tone, possibly with increased intonation accuracy, plus enhanced overtone clarity in some cases, which could be heard as a little more “shimmer.” If you’re thinking these are all characteristics of the classic Fender sound, you’d be right—or they are, at least, until you change those vintage frets to jumbo.
Finally, their taper. Taper refers to the gradual increase or decrease of the pots ohm as you adjust it. There are two types of pot taper, Logarithmic (Audio) and Linear (Lin). The human ear hears in a logarithmic manner, so in a gradual increase or decrease, whereas linear, to our ear sounds almost more like an on/off. Which you use is completely up to you, many players prefer a linear volume pot for example, but I find that a quality logarithmic pot in both volume and tone positions offers more scope for adjustment, if using a quality pot that is! Low quality audio taper pots, in my experience, offer unreliable tapers, often not providing a even, gradual adjustment as you roll off or on. A guitar's volume and tone pot can bring out so many great sounds from your rig, it offers versatility to your sound, and I love pushing an amp hard and finding those sweet spots on the guitar's controls to really capture a great tone. So I feel that's why a quality logarithmic pot with a perfectly gradual taper is an incredibly important component in the electric guitar. 
When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​
I understand and concur with you totally, as a sound man, I love it when everyone is direct, it makes life so much easier. every mike you eliminate adds roughly 3 db headroom overall to the max level without feedback. But as a bassist, and a Chapman Stick player, ampless just feels too flat and lifeless for me. I recently worked a John McLaughlin and Fourth Dimension gig in Bali, Both John, and Gary Husband went direct, it was wonderful. The bassist was amped though, for the same reasons I prefer to be amped If I am playing bass. Nathan East is another who doesn’t like bass in the monitors, preferring the sound and dynamic control of having his own amp. By and large, I find that generally (with some VERY notable exceptions) people who grew up playing concerts “back in the day” prefer amps, subsequent generations of people who grew up playing with small “portable” amps (think SWR, etc.) generally don’t mind going ampless, they have pedal racks, and have the sound they want from that. They don’t miss the air moving on their strings, because they never had it.. Perhaps because I am a dinosaur, I need the feel of 6, or 8 10s behind me, (or at least 2 15s), the resonance effect it has on the strings, makes my instrument come alive and it breathes with a feeling no pedal rack can duplicate. You should see Bootsy Collins’ rig, he had 2 1x18s, 2 2x15s, and 2 4×10 boxes, and that is what he calls his “small gig rig”! I guess I grew up regarding the amp as an integral part of my instrument, without it, playing feels, well, like you don’t have an amp! Even in the studio, I run a DI into the board, but I play through an amp for my own feel. Peas.
Included here after the filters are shifters like your standard pitch shifters, harmonizers, or octave pedals. You want to take care of any pitch changing (I'd argue even vibrato should happen here) before you add other effects into your signal, since they will react to the audio signal itself. You don't want to add reverb and then try to pitch shift, because the signal you send becomes too complex and inaccurate for such a precise effect.
Visually, what sets this guitar apart is its distinct headstock shape, but there's more to this guitar than meets the eye. Firstly, the guitar's top is crafted from solid cedar, an interesting wood choice because this type of wood is more commonly used on nylon string guitars. The warm tone of cedar matches nicely with the bright sound of wild cherry, a staple tonewood used on the back and sides of most Godin guitars. This combination gives the instrument a more distinct appearance and sound. Other features that don't follow the usual convention include the use of maple for the neck, and its B-Band M-450 T preamp system.
Before I recommended it to him, I went to my local GC and played one through some headphones. I thought it sounded pretty good - and certainly outgunned my Pocket Pod for pure functionality. Is this (or something like it) the be all and and all of tone? Of course not. But this (or something like it) can provide all sorts of options for practicing while leaving your neighbor (or spouse!) in peace.

4.) Check the guitar’s string height by pressing down on the first, second, and third fret. You should be able to do so with minimal effort. Come to the 12th fret and press down. The distance from the top of fret to the bottom of the string should be no more than three times. If it is five times, the guitar may have a warped neck or too high of a bridge.
Overall length is 28 1/2 in. (72.4 cm.), 10 in. (25.4 cm.) width, and 1 5/8 in. (4.1 cm.) in depth, measured at side of rim. Scale length is 15 1/4 in. (387 mm.). Width of nut is 1 3/4 in. (44 mm.). All original and complete, and quite clean overall; there are a few small dings to the finish and some light checking-almost inevitable on the Eko-made Vox instruments. The only notable finish marring is one spot where a superglue repair to a cracked pickguard corner left a bit of residue behind. A very nice little player, with an awful lot of chime! Excellent - Condition.
Last week we talked about choosing the right “Guitar Effects to Expand Your Sound” with sub-topics of “Guitar Effects Used By Your Favorite Pro Guitarists” and “Guitar Effects To Use For Each Music Genre”. Now that you’ve hopefully acquired some pedals of your own, there is another important topic that greatly influences the outcome of your tone – your pedalboard order.
I've had a Sunburst pattern Ventura when I was a teenager.. it was a nice guitar and played well. recently i saw a really well made Oscar Schmidt gs-1 . not expensive at all. My main guitar for many years was a Gibson howard roberts "artist" dove style. wine red and mother of pearl inlay and gold plated. I eventually sold it to a lady in alaska that plays a lot of blue grass and pop. I got full money out of it. I had it 25 years, so it was vintage by now.
In the 1950s, several guitarists experimented with producing distortion by deliberately overdriving amplifiers. These included Goree Carter,[3] Joe Hill Louis,[4][5] Elmore James,[6] Ike Turner,[7] Willie Johnson,[8] Pat Hare,[9] Guitar Slim,[10] Chuck Berry,[11] Johnny Burnette,[8] and Link Wray.[12] In the early 1960s, surf rock guitarist Dick Dale worked closely with Fender to produce custom made amplifiers,[13] including the first 100-watt guitar amplifier.[14] He pushed the limits of electric amplification technology, helping to develop new equipment that was capable of producing "thick, clearly defined tones" at "previously undreamed-of volumes."[13]

The first Hagstrom electrics actually came to the U.S. beginning about 1959, carrying the Goya name imported by New York’s Hershman (Goya acoustics were made by Levin, also in Sweden). These were the now-legendary sparkle-covered hollowbody “Les Pauls” with the modular pickup units. However, while the Goya acoustics continued on in the ’60s (eventually to be distributed by Avnet, the owners of Guild in the late ’60s), the Hagstrom electrics took on their own identity and switched to Merson. The first Hagstrom I guitars were the little vinyl-covered mini-Strats with the “swimming pool” pickup assemblies – basically two single-coil pickups mounted in a molded plastic assembly looking like its nickname, with sliding on-off switches and the Hagstrom fulcrum vibrato (which was also used on early Guild solidbodies). These were followed by similar wood-bodied Hagstrom IIs, then the quasi-SG Hagstrom IIIs in the ’60s. Hagstrom electrics continued to be imported by Merson through most of the ’60s, but by the ’70s distribution had switched to Ampeg, which was responsible for the Swedes, and several thinlines, some of which were designed by Jimmy D’Aquisto. Hagstrom hung around until the early ’80s before disappearing.
Rosewood » The diminishing supply of Brazilian Rosewood has led to Indian Rosewood replacing it in most markets. While the two look different, the tonal quality is virtually the same. One of the most popular and traditional woods used on acoustic guitars, rosewood has been prized for its rich, complex overtones that remain distinct even during bass-heavy passages. It's cutting attack and ringing tones make for highly articulate sound and plenty of projection. Rosewood is also a popular choice for fingerboards and bridges.
Seagull acoustic guitars are among the best values you are going find. They’re made in Canada, and there’s an attention to detail and craftsmanship here you may not expect in guitars at these price points. The Seagull Artist series is the top of the lineup. You’ll find unique tonewoods and high-quality construction techniques at an affordable price.
There was a band in Manchester called Sister Ray, who were just this scary bunch of men/reprobates. I guess word had got around that I had a knack and was a useful little guy to have around, and you only have to buy me some Coca-Cola and I was good to go. So I played with them. I started playing my first sort of shows in front of real [crowds] when I was fourteen.

Here we have another great Yamaha Its Sound is truly WELL beyond its price point someone will be very pleased. aprox..1972-74 YAMAHA FG160 WOW! . ...This is a Gorgeous MARTIN style REPLICA and for the money compares very well to the original in quality materials used..sweet vintage SPRUCE TOP now wonderfully ambered in color from age just too cool, The Back - Sides & Neck are all made from choice AAA Mahogany just what you would expect from an expensive Martin or Gibson...only you would expect to pay much more for one of those , but this is a rare early non "Nippon Gakki" model with the Red Label from Korea.. These early issue Red Label Guitars from Korea utilize the very same materials that were made in Japan. These components were used under strict quality control and 100% assembled in Korea from the very same vintage wood - components & parts as the Japan made Yamaha's. We have had many of these Red Labeled Yamaha's in the 180's & 160's currently and over the years I see up close and in person the very high grade AA mahogany neck s sides & back & the same nice nickel tuners & hardware the very same one piece solid neck no scarf joint at the back of the headstock area like the later Korean & Chinese examples ... This era exhibits just the same just as nice woods as those Japanese big dollar players but " SOME" not all are hidden treasures and are still a real bargain today when compared to the Japanese Red Label versions or a Martin or even Japan made models of this & finish & the materials on this guitar are very nice! This guitar does not take the back seat to the Red Label Nippon Gakki version at all. The action is very EZ to play and the TONE is simply wonderful..The Condition is very good++ to excellent vintage it is not mint,and it is not has natural minor play wear and dings associated with a well loved and played quality guitar it has all the rich patina now of a true vintage acoustic and is quite beautiful in its own right. This guitar has a good history of care its a California guitar where the climate is stable and quite favorable to guitars and was adult owned & loved. This guitar has the preferable a nice MEATY U Shaped Premium Mahogany one piece solid NECK, the frets are still good, The Rosewood is gorgeous too it looks to be Premium grade as well..You will not be disappointed with this guitar at this price the sound is rich like a an expensive $1,000+ guitar, big tone repairs, structural damage..It comes with a new set of Martin strings installed ready to play out of the box. TRULY STUNNING, SEE MORE ... This baby is nice and sweet in person...very nice, , with a classic MARTIN LIKE feel & Sweet-Tone that simply is very hard to beat. The neck is STRAIGHT and the frets are fine w/plenty of life left,this baby plays real nice she stays in tune very well.. .nice workmanship & choice select materials used....You will not be disappointed with this FINE YAMAHA FG160 guitar with NICE TONE & SOUND...its a real Great Player ....This guitars condition is rated at a 8+ Very good+ or better and is very good to excellent condition only a few very minor dings can be seen. this is a real Vintage guitar" and as you can see its in Gorgeous shape!. no known problems cracks-breaks-repairs with no other known issues at all. This one is is 100% READY TO GO!!! its in very good to excellent condition a solid 8+ OR BETTER. This .

As early as 1924 or so, Lloyd Loar had experimented with amplifying acoustic instruments, though it would not be until the ’30s that his efforts would pan out (without great commercial success). He was undoubtedly ahead of his time. The only amplifier technology available to Loar was primitive radio amplification, hardly adequate for cutting through the horn section. As the ’20s progressed, Hollywood invented “talkies,” and huge valve amplifiers were developed to fill theaters (the music trade press at the time repeatedly published essays assuring musician readers that talkies would have absolutely no effect on the jobs of theater organists!). Part of this technological development included the invention of more and more tubes and the improvement of older designs, which increased the possibilities for instrumental amplification.
Most guitars will have at least one TONE knob - a way to adjust the frequency spread of the signal going to the amplification system. Similar to a TONE adjustment on radios, stereos, other things; it usually is a means to adjust how much of the higher frequencies are sent to the output. Rolling the knob “back” will reduce the higher frequencies and can help make the guitar sound less “shrill” if it exhibits that tendency.
DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.
A. Electric guitars either have bolt-on, set neck, or neck-through neck construction. Bolt on necks are simply bolted onto the body, set necks are set into the body and glued, and neck-through construction is where the neck extends all the way through the body. The latter is generally considered the best and most durable, but won't be found on cheaper guitars.
Playing guitar is an exercise in memorization. There’s really no way around it. You have to remember stuff, and the primary thing you have to remember is where notes are on the fretboard. Eventually, muscle and ear memory will kick in and the remembering will get easier, but for the first little while, every time you play guitar, it’s like a pop quiz. It’s not fun to memorize something by brute force, but it pays dividends.
Let me begin by saying this guitar is really good right out of the box. It has a booming sound, and really fills a room even when not plugged in. However, to make it really shine, you should perform a basic setup. I replaced the saddle and pins with bone and sanded the bone saddle down to lower the action. The nut is good from the factory. I also oiled the rosewood fretboard and added Martin phosphor bronze medium strings. After doing this work, the guitar sounds every bit as good as my 90’s Martin DR which is stellar. At this price range, I didn’t expect much, but what I received was a very pleasant surprise. Don’t hesitate to buy this package!
We started finding that this type of construction leads to the neck bending (or bowing) after about 6 months. Unfortunately with the traditional method there is not an easy way to adjust it back to normal - once it is bent it's time to get a new guitar! This lead us to re design our classical guitars to use a truss rod. A truss rod is a much stronger example of the bar used in traditional manufacturing, but its main advantage is that it is adjustable. So if in the future you neck begins to bend it can easily be adjusted back into correct shape.

Seagull Guitars is a sub-brand of Godin that utilizes their modern design and production capabilities in building classic looking instruments. The S6 Original exemplifies what the company can do, combining Godin's build quality and attention to details with old school aesthetics and playability, and it does all of this while retaining a very reasonable price tag.

So don't hesitate; your next multi effects pedals, rack-mounted units and accessories are probably waiting just a few clicks away. The only thing better than a board full of great pedals is one box that combines all those great pedals into a single convenient package - and once you've got that multi effects unit onstage with you, the possibilities are virtually endless for the personalized tones and unique sounds you'll be able to bring to every performance.
“The tone thing is amazing because you can have one rig, have three different guitar players, and each guy can play the same exact thing and it’s going to sound different,” says L.A. Guns guitarist Stacey Blades. “It’s all in the hands.” Waara from Line 6 agrees. “Any guitar player will tell you, at the end of the day, it’s in your hands and you will sound like you will sound,” he says. The percentage of influence the hands wield is shockingly high.
After steel strings were the norm, rectangle bridges were still used on the lower end Martin models and smaller body models. Bridges don't last forever unfortunately, and the rectangle models are easy to reproduce. Hence here's some specs that may help you determine if a rectangle bridge is original. A Martin rectangle bridge should be 6" long and 1" (or slightly less) wide. The top of the bridge should have close to a 16" radius lengthwise. The tallest point of the bridge should be between the A & D strings, and the lowest at the high E string. The wing thickness is about .095".
I found one at a local shop, 60's Norma, resembles a Strat LIKE guitar, but with a sweet design... It has two switch where you would fidn hte pickup selector on a gibson les paul. Its got a few nicks and such, but it sounds REALLY good and the guy only wants 60 bucks, I plan on buying it, re-fretting, and doing some custom fix up on the body. And He said pretty much everything is original... A pretty sweet guitar if you ask me... If and when I buy it I'll get a picture, email if interested!
By and large, time-based effects split the guitar output into two identical signals and momentarily hold one back while allowing the other to play in real time. The two signals are mixed back into one at the output. Usually you can control the length of the delay and the amount of the signal that is affected versus the part that stays "dry" (unaffected). This latter control—found on most effects—is usually called the level control.

So, here's the story I heard from the guys in this shop, one of whom claims to have met Trev at NAMM. He said Fender (and maybe Gibson?) owe him a bunch of money for custom parts and design fees and whatnot, so he started the Vintage line as a sort of f*** you to them. Don't know if it's true but they're so much like a real tele I could see him getting sued, assuming they're not afraid of him countersuing for unpaid invoices. Who knows, maybe it was all a sales ploy. In any case all the sales pitch I needed was playing one. Plays as nice as my MIM Deluxe for half the price.
{ "thumbImageID": "GRX20-Electric-Guitar-Black-Night/519417000787000", "defaultDisplayName": "Ibanez GRX20 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Night", "sku": "sku:site51275776901849", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Black-Night-1275776901849.gc", "skuImageId": "GRX20-Electric-Guitar-Black-Night/519417000787000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51275776902065", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Jewel-Blue-1275776902065.gc", "skuImageId": "GRX20-Electric-Guitar-Jewel-Blue/519417000085000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The main reason this exists is because some players prefer to drive their amplifier's preamp with high gain to achieve distortion instead of using an emulation through a pedal. This means that you can't push modulation and time-based effects into the preamp since distortion will come after them. Again, you can do this but it will sound horrible because it breaks our four main rules above. Nobody wants a muddy, smeared, and washed out tone, and thus the effects loop exists.
The whole point of having a DIY guitar kit is to build a guitar that you like, so make sure that you get one with you're preferred shape and profile. Kits with classic guitar body shapes are the safest choice, as evidenced by their continued popularity in the market. But don't limit yourself with just the familiar, spend time looking at other designs to see if you're missing out on something cooler, something that better matches your personality.
Another thing that endears them to many guitarists is that they source 100% of their woods from sustainable sources and they use hydro-electric power. When it comes to the environmental footprint of a guitar, this is an area where Seagull are out in front and the big name brands, who while working hard to improve their own environmental impacts, are still playing some degree of catch-up.
If you want to measure the fret size on existing instruments, a good way to do it is to get an inexpensive dial caliper (think Harbor Freight etc).  You can measure the width with the outer jaws (make sure to zero out the calipers for accurate measurements), but for the height (unless you are going to notch the depth rod and subtract the difference), use a piece of something of a uniform thickness and drill a hole in it to accomodate the depth rod, place it across two frets and measure thru the hole (usually near the crown) to the fingerboard and subtract your piece's thickness.  When measuring fret height, it is always good to measure a few different places on the neck as the height may vary according to leveling and wear. On many guitars (but not all) the upper frets (if there is not a neck joint area hump that was accounting for during leveling) will be a good indicator of fret height.
The same no-compromise attitude that gives the Newporter Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech - NuBone nut and saddle for greater sustain and a Fishman preamp system that makes it easy to plug in without sacrificing the guitar's natural sound. Its lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style, and its walnut fingerboard and bridge further augment this instrument's vibrant tone.
COST – I have touched upon this topic several times maybe but I feel like I need to reiterate. Amps are usually not a cheap thing to come by, especially if you want a tube amp. BUT practice amps are good because they help beginners develop their skills without having to spend several hundred. Needless to mention, even practice amps come at various prices. For instance, Donner Electric Guitar Amplifier 10 Watt Classical Guitar AMP DEA‌-1 we talked about is twice as cheap as Roland CUBE‌-10GX 10W 1×8 Guitar Combo Amp. While price often is a good guideline to which model is better you should always keep in mind that more famous brands will have more expensive models even in the cheap sections. Apart from that, keep in mind that an amp having a lot of great features and effects does not mean it’s good.  

Though it’s a pretty sad end to what became a beloved brand and guitar, the Hi-Flier guitars and basses gained new life in the mid-‘90s, thanks to the aforementioned famous players. Today, they're again seeming to blossom in the vintage market. Only a few years ago, a Hi-Flier could be purchased on the cheap, but sales prices for these funky guitars have steadily been on the rise.
Of course, any item is only worth what a willing buyer will pay to a willing seller. iGuide?is "just a guide." Please be aware that PRICES VARY WIDELY from region to region. Current estimated values are the result of much research. And we invite anyone to help add and update data. Read the "What's A Wiki" section below for more info on how to help.
Launch price: $1,499 / £1,211 | Type: Amp modeller/multi-effects pedal | Effects: 70 | Amp models: 41 guitar, 7 bass | Connections: Standard guitar input, standard aux input, XLR mic input, standard main outputs (L/mono, R), XLR main outputs (L/mono, R), standard stereo phones output, 4x standard send, 4x standard return, s/pdif digital in, s/pdif digital out, AES/EBU and L6 Link out, Variax, MIDI in, MIDI out/thru, USB, 2x expression pedal, Ext amp, CV | Power requirements: Mains power (IEC lead)

I have a Montclair guitar, it sounds like I have an original but I have some questions. I purcahsed this quitar about 40 years ago. It is a dark brown archtop, with two cutaways and a pick guard like in the picture. On the top of neck the only says Montclair, strait across, and on the back it says "steel reinforced neck". On the inside the only number is L 6089.

A brilliant musical tool, guitar is one of the most familiar instruments widely preferred by majority of people. Are you looking to buy a perfect guitar? If yes, then check the given Best Guitar Brands In India throughout this page. At some point of time, you must have thought to learn guitar because it not only provided inner sense of pleasure but also impress others. If you are a beginner and passionate to learn this brilliant musical instrument, then must consider below provided popular acoustic, electric and bass guitars. Most importantly the sound and price of guitars are mostly considered by the buyer. Even many Indian musicians have opted them .While it is very tough to choose perfect guitar brand at the beginning learning time.
Although acoustic guitars have recently surpassed electrics in popularity, the electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. If you want to play in a band, you’ll probably want an electric guitar. You’ll also want one if you want to develop the ability to play melodies and solos because electric guitars are, in general, better designed to accommodate fast fingering and more able to stand out in a musical group.
Like trapeze tailpieces, top mounted vibrato bridges transfer the string tension to a guitar’s side, offering more natural string resonance. Embedded units like the Vibrolas found on Gibson Flying Vs transmit the tension to the guitar’s body. Through-body units do neither, employing strings to absorb the string tension. Another system, the TransTrem, developed by Steinberger in the ’80s, has locking positions that allows players to transpose their tuning to other keys.
{ "thumbImageID": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "defaultDisplayName": "Yamaha GigMaker Acoustic Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115034173", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Natural-1274115034173.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tobacco Brown Sunburst", "sku": "sku:site51274115034083", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "285.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst-1274115034083.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst/519040000337000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The beauty of an affordable small amp is that it can be high quality without the sacrifice of anything. I mean yeah some people say that the low tones disappear a little when the amplifier gets small, but don’t listen to them too much. Unless your low tones are being drowned out by some loud person screaming into the microphone so hard that the system starts screeching, even the smallest of amps can produce a respectable low tone. The small amplifiers are there to be portable and easy to have, so that you never have to deal with a back hurting (unless your instrument is heavy) or your arms being tired from anything other than playing the guitar too much. Which is why the Blackstar Fly 3 Battery Powered Guitar Amplifier is a great piece of equipment to have in your artillery. Portable, small and powerful in sound, what else could anyone ever want?
I have to say I'm really impressed with the Obsidian HSS wiring harness, The build quality is top notch, and the simplicity to install really delivered.It only took a few minutes to connect and be up and running. I love to customise my guitars and love to play around, so having the ability to swap out pickups without a messy soldering iron is fantastic, and the wiring is super clean giving a professional finish. I'll be intending to use the obsidian wiring harness in future project guitars -I highly recommend- Guitar sounds great ( oh did I mention the extra guitars picks too. nice touch)" - Ricci Custom HSS Strat® Wiring
Ovation Instruments is a Division of Kaman Corporation, a major supplier to the United States government of military helicopters, rescue equipment, electronic components and other aerospace products. There are eight divisions of Kaman, participating in such diverse industries as commercial transportation, nuclear sciences, space medicine, education and social sciences, oceanography and, most recently, recreation.

While many players revere the original analog effects boxes and their modern reissues, the majority of effects on the market today have digital circuitry. Don't let that be a deterrent, digital effects are so advanced now that many of them can only be distinguished from analog effects by certified tone geeks. Professionals at all levels use digital effects. There are advantages to both analog and digital stomps, and either can be the right option depending on the player and the music.
I Have a '70 lyle hummingbird and its a solid spruce top and mohagony neck back and sides. My guitar luthier fully inspected it. Mine is in near mint condition and sounds identical to the '64 Gibson Hummingbird my luthier has. He was trully freaked out by this.. ha ha He keeps trying to buy it from me but im affraid im hanging on to mine. It seems there is alot of contradictory information on these guitars. It is super hard to get more than a small paragraph of info on these things. One site out there has several catalogs from lyle guitars but they require a payment or paid membership to view them. If you are interested google lyle guitar catalogs. There is one that sold for 600.00 at joes vintage Its Identical to mine. If I find any more info Ill post as discovered. is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to also participates in various other affiliate programs, and we receive a commission from purchases made through our links.
Large-diaphragm condenser microphones set to cardioid or omni mode work better for ambient purposes at distances of 2-3' or farther, introducing more room sound and coloration. Ribbon microphones, which are also (usually) dynamic, have become a popular alternative for guitar-cabinet recording in either close or distant miking situations. They combine good, detailed sonic reproduction with the capacity to withstand intense levels of sound pressure (a characteristic of their dynamic brethren, as well).
Most of the better machine heads on the market these days use a standard .375" headstock hole, so swapping tuners isn’t that hard to do. The problem comes with the mounting at the rear of the peghead. Luckily, if you use the type that screw down from the front side with a nut and washer, you can swap and test before you drill additional mounting-screw holes.
The Effect: Boost pedals are essentially an extension of your guitar’s volume knob. Their main purpose is to give you additional gain to work with. This extra gain can be used to accentuate your solo sections, give you more girth in your clean channel, or even push your tubes into a slight overdrive. A great example of a booster pedal is the legendary Electro-Harmonix LPB-1.
1975 Gibson Les Paul "Goldtop", Deluxe to Standard conversion, Electric Guitar. This is from my personal collection. I have another and mostly play my Strat and Tele for the music I'm doing now, so it's time to thin the herd (be aware that I might change my mind about selling it). Great, original Gold Top finish with nice checking. I was actually trying find one with a lot of "green" wear on the top of the body, but this one still has some good character (I hate shiny guitars). Plenty of wear to the finish on the back (see photos). Other than a pickup change and strap button change, the guitar is as I bought it used. When I purchased it there was a set of THC, PAF'S installed (don't ask, they're gone). Personally, I didn't care for them for a few reasons, so I replaced the front with a new, Gibson 490R, AlNiCo II and a Seymour Duncan, Seth Lover in the bridge.  Pots have been replaced and the selector switch appears to be original. It already had the Deluxe to Standard conversion work done (no the truss rod cover is not the original, as it should say deluxe). I believe the bridge and tailpiece are newer units as they shine too much for the rest of the guitar. The jack plate has been changed from plastic to metal. I installed the Schaller strap lock buttons. The tuning machines have been changed to sealed Grovers. The headstock has been re-fin'd in the back, from an what looks to be repairs around the tuners. In doing so, the serial was made very faint, and only somewhat readable. Appears to be "92?128". Has the 70's volute for added headstock strength. Bound, Rosewood fingerboard. Mahogany neck. Plays and sounds great. Original frets have normal amount of wear with plenty of years left in them. Neck and action is adjusted perfectly (for me anyway) and I did guitar set-ups for 12 years at a Fender / Gibson / Martin / Yamaha / etc dealership at $45-$150 a pop. I have sold guitars for many years and have been to "vintage" shows, so I'm fairly versed in guitar speak. This is not a "minty" show piece. If that's what you're looking for, then buy another guitar. This is a player's guitar. The guitar has not had the headstock broken off however like many used Gibsons. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body) and cleaning and polishing. STAYS IN TUNE!!! I play it though all three of my amps, a Trace Elliot "Super Tramp", Marshall JCM-800 and a '67 Fender Super Reverb (original). Plays and sounds great for about any type of music, except the currently installed pickups are probably too hot for jazz. We also installed a new set of .010 strings. The cream colored pick guard and chrome bracket is in the case pocket, I just removed it as I don't play with them installed on any of my Pauls. It's in fine shape if you wish to install it. Guitar weighs in at 10.5 lbs, assuming our UPS scale is reasonably correct. Original Gibson, Les Paul case with the purple lining included (the lockable latch is locked "open" and we do not have a key. Case still stays closed with the other latches. It was that way when I bought it years back).
I can't even begin to tell you how much I love mine, both for sentimental reasons and due to the fact that you couldn't buy that kind of quality nowadays for under a grand! I too, like the OP, am getting ready to do some restoration/ TLC on mine. New nut, saddle, bridge pins, tuners upgrade, and eventually fretwork. If you guys ever see one at a pawn shop, pick it up quick!! They can usually be bought for under $300!!!!
The aim of Audio Issues is to help interested newcomers get started in the world of audio production with easy to use practical audio production tips for beginners and advanced. If you are just starting out doing some home recording or have been engineering for a while, these quick and easy audio tips are guaranteed to be of interest and use to you.
"The library has a huge amount of great samples covering every nook & cranny of the electric guitar, and it really is of the highest quality... I could tell that they must have put in a gigantic effort into the scripting, sampling, and design... It’s easy to use, has extensive options for articulations, sounds even better with its effects, and yet it can have a pristine, clean sound as well. I highly recommend it... When they say 'Absolute Electric Guitar' on their website, those words are a lot to live up to [and] they achieved this with a brilliant product and awesome sound." Rob Mitchell (SoundBytes Magazine)
Jazz guitarist Les Paul spent years tinkering with his own electric guitar designs, but his first creations were initially rejected by Gibson’s parent company in 1946. But just a few short years later, on the heels of Fender’s success with the Telecaster and Paul’s growing popularity as an artist, Gibson struck a deal with Paul to play and endorse their new design for a solid-body electric. Gibson released the guitar as the Les Paul signature model in 1952, and since its release, it has become one of the world’s most imitated and sought-after guitars, with late ’50s vintage models being among the most prized instruments in the world.
The envelope filter is also known as an auto-wah.  It functions sonically like a wah-wah pedal but uses the strength of the signal to control the sweep of the frequency.  Typically, control knobs allows the player to set the amount of wah to interact with picking, so that the guitarist can dynamically control the effect without using a rocker to engage the filtering.

For some performances - those well controlled performances of an orchestral guitarist, let's say - machine notation can get a lot closer to producing a true sound than it will to the variations offered by a virtuoso jazz guitarist, blues master or metal thrasher jamming outside the box. In some cases, the machine sound might already fool some of the most discerning listeners -- if the performance does not test the limits of the mechanical emulation.
The National STEM Guitar Project, in partnership with NSF Advanced Technological Education (ATE) Centers with funding provided through a grant from The National Science Foundation (#1700531, #1304405, & #0903336), hosts innovative Guitar Building Institutes throughout the US. Five-day institutes, combined with additional instructional activities comprising 80 hours, provide middle, high school, and postsecondary faculty training on science, technology, engineering and math (STEM) applications as they relate to the guitar. The institutes present and teach participants hands-on, applied learning techniques to help engage students and spark excitement for learning STEM subject matter.
With a neck made of mahogany and a body of maple, the Ibanez Artcore AF75 is one of the best hollow body electric guitars included on this list. Due to its hollow body design, this guitar has the ability to play well in all genres, ranging from country to hard rock, and is known for its high-quality tone and ability to maintain tune through long periods of playing. This is possible in part due to the pickups at the neck and bridge, reducing excess humming for clarity in tone and pitch.  The knobs at the base of the body have a super-grip design, making it easy to change the volume and tone between the neck and the bridge and utilize the three pickup selector. A pearl block inlay is included on the rosewood fretboard, making this 20 fret electric guitar a strong option to conclude this list.
When you’re just getting into the electric guitar, there are a lot of items you’ll need to get going. This includes the guitar itself, tuners, straps, an amp, a bag or protective case, a stand, etc. Buying it all piece by piece can be rather expensive. It’s much more practical in financial terms to opt into one of the many starter packs on the market. If you want to know which ones are worth your time, here are the 8 best guitar starter packs for beginners:

There are several aspects that make the acoustic guitar different from the electric one. The most notable difference is the fact that the acoustic types do not need a source of electricity or rather they do not have to be plugged in for them to be heard. They are relatively large and are built with a hollow chamber for the magnification of the guitar’s resonance thus giving out sound that originates from the plucked strings. It also has a bridge that is essential for the transmission of vibration of the strings to the body. They are self contained, needing minimal preparation to play. In other words, they are the guitars to be bought by all those looking for simplicity.
The Seagull Maritime Solid Wood Series of acoustic guitars are designed to offer the features and benefits of the brand’s higher-end Artist Series of guitars but at a more affordable price point. The Maritime SWS guitars are offered in a variety of shapes such as mini jumbo, folk and dreadnought, and come in two custom-polish finishes: high-gloss and semi-gloss.

As the text says, the pick wasn’t exactly identical with all the samples. This would make for the differences alone: The movement of the string must not be imagined as a plain two dimensional one. In fact it’s rotating in three dimensions, while the pickup only senses that part of the movement which is perpendicular to the deck of the guitar. The vibrations direction changes all the time and does so for each frequency component (read: harmonics) independently.

PAINT INFO Remember to stick with the medium that you have chosen to finish the guitar with. Never mix lacquer with water base. This will lead to a cracked finish or lifting up off the clear coat. For my guitar I used a lacquer based paint that I got from an auto shop for one project and just plain white lacquer paint that i got from Home Depot. The waterbased paints and clear coats tend to be more expensive so that's why I chose lacquer. Make sure the surface has been cleaned and is dust free before you begin to paint. Try to find cans that have a fan nozzel because it makes it easier to get an even coat.
Steve is the best! He does great work and loves talking about all kinds of guitars. I brought my Squier Affinity Stratocaster to him for a setup and a pickup replacement job, and I learned more about Stratocasters from him than I ever would have expected. I will definitely be a repeat customer! From what I've seen, he treats all of his customers' guitars, from my Squier to an Eric Clapton signature Strat, with the same level of respect and quality of work.
Large-diaphragm models are popular, with Neumann mics particularly favoured. The famous U87 studio workhorse is probably the most commonly mentioned, but it's by no means the only contender. Eddie Kramer, Steve Albini and John Leckie single out its predecessor, the U67, for example, while both of the earlier U47 models (valve and FET) receive name checks from people such as Steven Street, Glenn Kolotkin, Butch Vig and Bruce Botnick (note that U47s were marketed under both Neumann and Telefunken brand-names, but they're essentially the same mics). Neumann aren't the only game in town, though: AKG's C414B-ULS is probably joint most popular large-diaphragm model alongside the U87.

Featuring a comfortable neck and solid spruce top, the Epiphone Dove Pro Acoustic-Electric Guitar rings out with full, rich sound. Based on a design going back to 1962, the Dove Pro is equipped with a Fishman Sonicore pickup system that accurately reproduces its acoustic tone when you plug the guitar into an amplifier or PA system to play with amplified instruments. A terrific value.
According to Mr. Noguchi, Teisco instruments debuted in 1946 and were made by a company founded principally by the late Mr. Atswo Kaneko, a renowned Hawaiian and Spanish guitarist, and Mr. Doryu Matsuda, an electrical engineer. Mr. Doryu Matsuda was born in 1921 and was still alive at the time of this writing. As mentioned, Mr. Kaneko gave the guitars the Teisco brand name, however, the original name of the company was Aoi Onpa Kenkyujo (roughly translated: Hollyhock Soundwave or Electricity Laboratories). This was a small workshop formed in war-ravaged Tokyo.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: agile","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"martin","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Of course, any item is only worth what a willing buyer will pay to a willing seller. iGuide?is "just a guide." Please be aware that PRICES VARY WIDELY from region to region. Current estimated values are the result of much research. And we invite anyone to help add and update data. Read the "What's A Wiki" section below for more info on how to help. 

A good starting point when recording is to place the mic close to the grille and positioned over the centre of the speaker. However, it's worth moving the mic a little off centre if you're after a less toppy sound.Guitar amps tend to use 10-inch or 12-inch speakers without tweeters or crossovers, so they have a very limited upper-frequency response. These speakers may be used singly or in multiples, in either sealed or open-backed cabinets. The familiar overdrive sound was almost certainly discovered by accident when early amplifiers were driven beyond their design limits in an attempt to obtain more volume, but because of the restricted top end of the speaker systems employed at the time, the distortion was stripped of its more abrasive upper harmonics and actually sounded quite musical. So, what started out as a side effect of limited technology soon became adopted by blues players and turned into a distinctive style, which later evolved into rock, and then into heavy metal with all its spin-off genres.
ESP LTD is a big name when it comes to the production of electric guitars and has been making quality instruments for over 40 years. The ESP LTD EC-256 Intermediate Electric Guitar is just another example of the genius of ESP LTD. The body of the guitar is mahogany and the neck and fretboard are made out of rosewood. There is also a TOM bridge and a tailpiece attached to this guitar. The pickups of this guitar are the ESP designed LH-150 set. It comes in two color options, black and metallic gold.
An American company that makes some amazing acoustic and electric guitars, Taylor guitars are considered as one of the best in the world. Like Martin, they can be expensive, but surely worth every penny. Taylor and Martin have the upper hand when it comes to acoustic guitar brands in America. One of the popular series is the 200 series and is of great value. For beginners, Baby and Big Baby, and the GS Mini are perfect choices as they are small-bodied.
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
Originally, a signal would be recorded to two tape machines simultaneously. The playback-head output from these two recorders was then mixed together onto a third recorder. In this form, minute differences in the motor speeds of each machine would result in a phasing effect when the signals were combined. The “flange” effect originated when an engineer would literally put a finger on the flange, or rim of one of the tape reels so that the machine was slowed down, slipping out of sync by tiny degrees. A listener would hear a “drainpipe” sweeping effect as shifting sum-and-difference harmonics were created. When the operator removed his finger the tape sped up again, making the effect sweep back in the other direction.” Famous tunes using flange effects are “Unchained” by Van Halen, “Spirit of Radio” by Rush and “Bold as Love” by Jimi Hendrix. The flange on “Bold as Love” is credited as being the first recorded use of the effect in stereo.
Pitch shift effects, which includes harmony and octave pedals, are a lot of fun, and add depth and flavor to a guitar player’s sound. The effect works by taking the fundamental note being played on the guitar, and adding another note either above or below the original. Simply adding more notes will often produce odd, off-key notes if you’re not careful. Most modern pitch-shifting effects use advanced technology to make sure the added notes work harmoniously with the original.
Looking to connect with other fans of vintage gear? Join the community. Allow us to introduce you to the exclusive network of musicians and music lovers: Music Aficionado. This social network gives music enthusiasts a place to collect, share, listen to, and discuss everything they love about music from their favorite albums, playlists, and artists to their favorite pieces of gear, instructional videos, and altered tunings.
In a way, guitars are a lot like cars — spending more money can get you more performance through different specs and trims. The extra money usually goes into paying for better parts rather than more options; there aren’t a whole lot of places to add to a guitar (unless you want the ZZ Top spinner installed). Big bucks can get you better quality wood, a nicer finish, higher-end hardware, and fancier inlays. Some of these upgrades can alter the sound or simply make help playability. For example, the same guitar cut from poplar won’t sound as good as one cut from alder wood. Better tuners mean your axe will go out of tune less often. That said, some guitars will offer features that others don’t, such as tremolos and automatic tuning. Do your research and, as always, know what you need versus what you simply want.

This comment is directed towards the video of the gentleman changing guitar strings. I have an LP Junior, so I don't thread my strings through the guitar body. But I'm curious why he is turning the guitar completely over, flipping the guitar towards himself each time when he could in fact just lean the guitar away from himself, leaving the back of the guitar facing him? I know that seems a bit nit picky, but it would be tremendously more efficient just leaving the guitar on its side with less risk of the string damaging the guitar surface. Any thoughts or am I just missing something?
Rosewood back and sides, abalone (pearl) inlay around top edge and soundhole (but not on top around the fingerboard like a style 41,42,45 would have), inlaid bridge pins. Fancy backstripe of horizontal lines between two rows of diagonal lines (like style 45). Most style 40 models made were hawaiian style with flat fingerboard radius, flat flush frets, high string action, and no bridge saddle compensation. Most popular was the OO-40H (though they did made 2-40, 0-40, 000-40 and 000-40H models prior to WW2). Sometimes these are converted to regular "spanish" style guitar (fingerboard radiused, refretted, neck reset, bridge saddle angled). Made from the 1860s to 1917, then 1928 to 1941, then 1985 to present.
Schecter is one of the more recent brands to start building serious trust and authority on the guitar market. They started out as a parts company, only to cross into making their own guitars later on. It is no secret that Schecter guitars are first and foremost built with heavier genres in mind. Almost every model they offer packs so much range, though, that you can easily play anything you want without compromise.
Need a portable pedalboard for fly dates? Tech 21 has the answer in the form of the Fly Rig 5: a small but perfectly functional pedalboard, powered by an auto-switching adaptor, so it can be used anywhere in the world. What you get is the equivalent of five stompboxes. The SansAmp is at the heart of the Fly Rig. Stomp on its footswitch and its six mini control knobs light up blue. You get level and drive knobs, three-band EQ and a spring reverb emulation based on the Boost RVB pedal. In front of the SansAmp, you get the Plexi section, based on Tech 21's Hot-Rod Plexi pedal. One footswitch emulates the natural overdrive and distortion of a late-60s Marshall, with sound dialled in with level, tone and drive controls. A second 'Hot' footswitch brings in up to 21dB of boost and can be used independently of the Plexi distortion. Last in the signal chain is the DLA, a delay with tap tempo. The Fly Rig 5 is an extremely functional unit that contains arguably the most essential effects - you can plug it into a guitar amp or straight into a PA or mixing desk. It's also a life-saver should your equipment go down at the last minute, as well as being the answer to the prayers of guitarists who need to travel light.

This guitar sounds tighter and is less loud than a dreadnought. But its construction warms its tone considerably. Its owners say that its tone is well balanced – clear and punchy but still warm. It offers clarity in the higher registers, but some boom in the lower registers. For that reason, the LL16 is suited to almost any style of playing. It will not, however, be as punchy as the Taylor 210 or as round sounding as the Blueridge.

Lets face it: when most folks first pick up the electric guitar, the only other gear they think they might need would be an amp, a pick, some cables and maybe some pedals if they are savvy. As these players become more experienced and move from their garage to live music venues and recording situations, they eventually run into some issues and realize there must be better ways to be heard than turning the amp to 11.
History aside, modern-day Ibanez guitars are amazing instruments. They offer a very distinctive value and bang for your buck that is simply hard to match by other manufacturers. Ibanez has become huge in shred (fast lead playing) guitar and metal circles. High profile virtuosos like Joe Satriani, Steve Vai and Paul Gilbert have been greatly responsible for securing Ibanez’s place in super-fast, incredibly technical, shred guitar playing. Not to mention that Ibanez electric guitars simply feel “easy” to play, fast and comfortable. As far as ergonomics and playability, Ibanez guitars are hard to beat. Plus, you can get some very good inexpensive models too. If I where going to call a brand, “the Toyota of the guitar industry,” it would be Ibanez.
: I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.
Pictured is a tremolo arm or vibrato tailpiece style bridge and tailpiece system, often called a whammy bar or trem. It uses a lever ("vibrato arm") attached to the bridge that can temporarily slacken or tighten the strings to alter the pitch. A player can use this to create a vibrato or a portamento effect. Early vibrato systems were often unreliable and made the guitar go out of tune easily. They also had a limited pitch range. Later Fender designs were better, but Fender held the patent on these, so other companies used older designs for many years.