The company was founded in 1931 as the Ro-Pat-In Corporation (ElectRo-Patent-Instruments) by Adolph Rickenbacher and George Beauchamp in order to sell electric Hawaiian guitars. These instruments had been designed by Beauchamp, assisted at the National String Instruments Corporation by Paul Barth and Harry Watson.[1] They chose the brand name Rickenbacher (later changed to Rickenbacker), though early examples bear the brand nameElectro.[2]
P good...So Fun...Like most console gamers, I have greatly enjoyed the "Arkham" Trilogy by Rocksteady Studios, I say that because I did not complete Arkham Origins (Dev by Warner Bros.), however I did beat that now infamouse Deathstrokeboss fight but after that the game felt very recylced and I told my self I would for next-gen Arkham installment by Rocksteady....I was a fan of all three Batman games that came out last gen. Arkham Knight changes the formula just enough to keep it fresh, along with amazing graphics (best water effects ever) and Dual Shock 4 controller options, I know I'll be playing this game for quite some time.
Check out a set of Elixir strings for yourself to hear and feel the difference.  The coating actually reduces string squeaks as well, providing a consistent sound for close miking and recording acoustic players.  The squeak of the finger over the round wound strings of an acoustic has always been an intrinsic part of the instrument, but hearing the guitar performed without such extra squeaking may change your mind.
Often, multi-effects pedals and processors can be more cost-effective than purchasing multiple stompboxes. They also avoid the potential noise and tone-degrading impact of chaining numerous individual pedals together. That said, many guitarists prefer the way certain dedicated pedals sound or operate, and will collect many single-effect stompboxes along the way. If you are looking at purchasing multiple effect units but don’t have any favorites, purchasing a multi-effects processor can be a money-saving alternative.
the top five in no certain order are…….. JIMI HENDRIX .NIO EXPLANATION NEEDED……..RICHIE BLACKMORE he broght the strat into metal and he led his leads perfectly back into the song ……… .EDWARD VAN HALEN he was the next innovater after hendrix…………DIME BAG DARRELL….he was just plain the baddast ass of them all…………..AND ENGWIE MALMSTIEN he did everything else……..there are lots of great guitar players . but .these five guys set the bar for everyone else
In music, a guitar chord is a set of notes played on a guitar. A chord's notes are often played simultaneously, but they can be played sequentially in an arpeggio. The implementation of guitar chords depends on the guitar tuning. Most guitars used in popular music have six strings with the "standard" tuning of the Spanish classical-guitar, namely E-A-D-G-B-E' (from the lowest pitched string to the highest); in standard tuning, the intervals present among adjacent strings are perfect fourths except for the major third (G,B). Standard tuning requires four chord-shapes for the major triads.
Note: All versions and platforms of Rocksmith are compatible with the Real Tone Cable. It is a required 1/4-inch audio jack cable necessary for Rocksmith to detect and respond to your guitar playing. All versions of Rocksmith include the Real Tone Cable in the box, except downloaded versions and the Rocksmith 2014 Edition "No Cable Included" Version.

Effects can inspire you with new creative ideas, or just help you sound like your musical inspirations, go for it. I would urge you to consider a multi-effects unit like a Digitech RP series, or Line6 PodHD series. They can provide you with many options to try before you figure out exactly what you want. Many units can be had pretty cheap used, and as a bonus, most will act as a usb interface, and let you record your playing (for better or worse) to computer. – Michael Cook Apr 29 '13 at 21:39
This guitar follows traditional Martin specs with a 25.4" scale length and a 1.75" nut width, and they also gave the neck and ebony fretboard a worn-in feel that makes the guitar play extremely well right out of the case that it comes with. On top of its true to form vintage sound, playability and looks, the OM-28 E Retro is equipped with the extremely versatile Fishman F1 Aura Plus, which offers three acoustic voicings modeled from actual Martin Museum guitars. If you play various musical styles and you're looking for a be-all and end-all acoustic guitar, you will be blown away by the OM-28 E Retro.
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!

Loop pedals — or loop stations as they're often called — have exploded in popularity in recent years as more and more players have embraced the ability to build multiple parts and loops during gigs and practice sessions. With popular options like the TC Electronic Ditto Looper, guitarists can lay down a basic chord progression while soloing on top. Loop stations are also a popular option for vocalists who can use these devices to build harmonies or deploy creative vocal effects. Whether you're in need of a basic option like the Electro-Harmonix 360 Looper or a more elaborate solution like the Boss RC-505, there's never been a better time to get into the world of looping.
Fender also supply a variety of signature models, each with specifications similar to those used by a well-known performer. Custom Artist guitars are the Custom Shop versions of the Artist Series line, which significantly differ from the standard production models in terms of quality and construction, making these instruments much more expensive. As well as the other Custom Shop instruments, the Custom Artist guitars are available either as Team Built or Master Built items, some being exact replications of the specific artist’s original instrument, better known as “Tribute” series (featuring various degrees of “relicing”, such as Closet Classic, New Old Stock, Relic and Super Relic treatments, depending the model). Artists with models available in the signature range include:
New too was “the popular Supro” Baton Guitar, sold with a matching Baton amp as the Supro Baton Guitar Outfit No. 200. This was basically the same shape as the old Avalon, but a short-scale (21″) student version now finished in a grained walnut finish. The silkscreened fingerboard sported diamond inlays. The Supro logo plate was on the slightly flared head. This had the new exposed-staggered-pole pickup with a rectangular handrest bolted on over the pickup, all mounted in the middle of a large square plate. The strings attached to a pyramidal tailpiece. Controls now included bakelite volume and tone knobs on either side of the end of the fingerboard. The back was covered in no-slip suede. It came with a natty alligator soft case. Based on the use of the description “popular,” which Supro almost always used to describe previously available models, the transition from the Avalon to the Baton may indeed have begun in 1940.
The Epiphone Company is a musical instrument company which was founded in the year 1873. Epiphone is specialized in making Guitars and are one of the largest producers of guitars in the world. Epiphone has several ranges to choose from, as they brand them in different groups. Few of the Epiphone ranges of guitars are, Epiphone Sheraton, Epiphone Casino, Epiphone Texan and The Dot etc. Besides guitars Epiphone also manufactured upright basses, banjos and other forms of stringed instruments.
This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.
Other high-quality specifications include a bone nut, a molded metal jack plate that is curved and makes plugging and unplugging a guitar cable hassle-free, retooled knobs, fretwire that is slightly smaller than what you’d find on most PRS electric guitars, and PRS’s double action truss rod (accessible from the front of the headstock for ease of use).
The E-18 and EM-18 were basically the same guitar differing only in electronics. The E-18 featured two DiMarzio humbucking pickups, a DiMarzio PAF at the neck and a DiMarzio Super Distortion at the bridge. In addition to the regular controls, the E-18 had mini-toggle phase switch. Production of the E-18 began in April of ’79 and about 5,307 (about 1,320 a year) were made until the guitar ended in early 1982.

“The California Series captures the true meaning of a Fender acoustic guitar,” said Billy Martinez, VP Category Manager – Acoustics and Squier Divisions. “From the iconic 6-inline Stratocaster headstock to the original Fender body shapes and organic styling, everything about these guitars is uniquely Fender making them the ultimate tools for artistic creative expression. Whether you’re at the beach or rocking out with a band on stage, we’re offering players of all levels a chance to express their own creative style, standing out in the crowd with the bright colors and energy these guitars give off.
We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
Distortion is an important part of an electric guitar's sound in many genres, particularly for rock, hard rock, and metal. A distortion pedal takes a normal electric guitar signal and combine harmonic multiplication and clipping through the use of analog circuitry to create any number of sounds ranging from a fuzz sound to the sound of an overdriven tube amp and beyond! Distortion is essential to Heavy Metal Music.
A Power attenuator enables a player to obtain power-tube distortion independently of listening volume. A power attenuator is a dummy load placed between the guitar amplifier's power tubes and the guitar speaker, or a power-supply based circuit to reduce the plate voltage on the power tubes. Examples of power attenuators are the Marshall PowerBrake and THD HotPlate.
Myths and Legends: Valve technology is intrinsically the most elegant means by which a speaker is able to reproduce music. This is not because valves have magical qualities but because the technology by which they function is not achievable by other means. In ten thousand years from now Valve amplifiers will possible be the only remaining technology from the 20th century that will be still be being used and loved with as much passion as when first invented. As much as there is no proof that Valve amplifiers can sound superior to solid state I for one if given the choice will only listen to music through Valve amplification.
Re-amping is another increasingly common production technique, often used at the mixdown stage. This process involves a dedicated re-amping device, which takes a line-level feed from a mixing console or DAW interface and converts that signal's level and impedance to one that a guitar amplifier is able to accept. That signal is usually a separate "dry" (unamplified and unprocessed) guitar track recorded using an active 500kOhm direct box placed between the guitar and the amp.
Strings produce sound in the guitar. In electric guitars, because there are no holes, the vibration is passed to a pickup which senses the vibration of the strings passes the signal on to the guitar amplifier. There are two types of strings for electric guitars, light and heavy gauge. Lighter ones are easier to play and allow easy bending of notes, but they are more likely to break and produce less volume. On the other side, heavier ones produce high volume but are hard to play and require more finger pressure to bend notes.
This acoustic-electric parlor style guitar features a solid cedar top and solid sapele back and sides, premium appointments that other builders will require you to pay top dollars for. And it features old school parlor style body shape, which gives the instrument a vintage appeal, and blues box style tone with emphasis on the middle frequencies. This makes it ideal for blues, folk and old school comping, a good contrast to regular sized acoustics in a mix.

There are a couple of important things to look out for when buying an acoustic guitar for the first time, one of which being plastic hardware – especially if it’s used on the bridge or the tuning pegs. Unless you are paying less than a hundred dollars for the instrument, there’s no reason why a good beginner guitar should have a plastic bridge or saddles, which aren’t particularly durable and do nothing for the instrument’s tone or sustain.
Unlike Christian, however, Montgomery used his thumb instead of a pick to create the percussive-yet-warm tone associated with his style. (According to interviews, Wes learned to play with his thumb because it created a softer sound, appeasing his neighbors.) With his phenomenal ear, Wes quickly grew beyond his influences and developed a style all his own. His knack for melody, groundbreaking use of octaves in a soloing context and intricate chord solos—as demonstrated in his devastating interpretations of standards like “Round Midnight” and “Days of Wine and Roses”—broadened the range of guitar, pushing the instrument into unchartered territory.
The Website attempts to display product images shown on the Website as accurately as possible. However, The Top Guitars cannot guarantee that the image or color you see displayed on your monitor represents the actual product or conforms to the specifications of the product you have selected. If you have any questions about product appearance/specifications, please contact us before placing your order. The Website does not contain images of each offered item because some of them are Custom and not built and/or modified yet.
Since the Boss GT-1000 Guitar Effects Processor was announced at NAMM 2018, guitarists and bass players alike have been enjoying the functionality and unrivalled sound quality of the unit. We actually created a blog called 3 Reasons Why The BOSS GT-1000 Is Really Special, discussing 3 of the key features that make this stand out so much, but trust me when I say that there’s so many more reasons that this is easily one of the best multi-effects pedals ever made.

The only guitars that I have been able to find pictures of that have the little curly thingie on the headstocks have been Kents, Kawais and some kind of no-name guitar that looks like the factory took a red Kent 820 and sprayed black around the edges to create a “redburst” finish. The example above appears to has started as a regular sunburst finish with more red and black added. The neck, headstock, pickups, and body are identical to the Kent 820 except the name ‘Kent’ doesn’t appear on the guitar anywhere. Note that the hardware on it is the same as on the 820 shown. That bridge and tailpiece configuration is a little unusual for Kent 820s. (the 820 there is mine) The bridge and tailpiece on the Kent 823 is the more common configuration.

At the end of 1931, Beauchamp, Barth, Rickenbacker and with several other individuals banded together and formed the Ro-Pat-In Corporation(elektRO–PATent-INstruments) in order to manufacture and distribute electrically amplified musical instruments, with an emphasis upon their newly developed A-25 Hawaiian Guitar, often referred to as the “Frying Pan” lap-steel electric guitar as well as an Electric Spanish (standard) model and companion amplifiers. In the summer of 1932, Ro-Pat-In began to manufacture cast aluminum production versions of the Frying Pan as well as a lesser number of standard Spanish Electrics built from wooden bodies similar to those made in Chicago for the National Company. These instruments constitute the origin of the electric guitar we know and use today by virtue of their string-driven electro-magnetic pick-ups. Not only that, but Ro-Pat-In was the first company in the world specifically created to manufacture electric instruments. In 1933 the Ro-Pat-In company’s name was changed to Electro String Instrument Corporation and its instruments labeled simply as “Electro”. In 1934 the name of Rickenbacher” was added in honor of the company’s principal partner, Adolph Rickenbacker. In 1935 the company introduced several new models including the Model “B” Electric Spanish guitar which is considered the first solid body electric guitar. Because the original aluminum Frying Pans were susceptible to tuning problems from the expansion of the metal under hot performing lights, many of the new models were manufactured from cast Bakelite, an early synthetic plastic from which bowling balls are made.[2]
When Electric Mud was released, it was a huge success, selling 150,000 in the first six weeks. It was also the best selling Muddy Waters record at Chess ever, entering Billboard's Top 200 Chart. It was a triumph of a record that updated his sound and put him elbow to elbow with the bands that had influenced him. The record broke down restrictions of genres with its inventiveness and ability to re-arrange songs and have them come out as something radically different. Unfortunately, narrow-minded blues purists across the board denounced it as atrocious, offensive and a big "sell out." There's a direct similarity between this and what happened to Bob Dylan a few years earlier when he decided to go electric, making his folk-purist fans angry that he was "selling out" to rock and roll. Since Muddy is primarily a blues artist, overviews of his career would be written by a number of blues historians who would automatically dismiss this record for years to come.
I don't think its objective that sweep picking is better than tapping. I mean all of these techniques are great. One could say that vibrato is the best technique. But for me both tapping and sweep picking are great. Tapping kinda sounds like emotional/crying to me. While sweep picking kinda sounds like some fighting/running, I mean fast paced. - zxm
Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.

Small guitar amps, contrary to popular belief, have the ability to produce a very powerful sound. You don’t need a whole lot of surface area to have an impressive sound, as so many chihuahuas have proven by keeping up their owners nights on end with their barking. The small amplifiers, the best of them, have sound comparable to the sounds of the larger amplifiers. This has been proven many a time, especially by the band called Annihilator. The guitar player for the band has a very specific set up for himself, with a relatively small amp being one of the main parts of the set up. While his is not as small as some of the ones here, it just goes to show that a live performance does not need a large amp for good quality sound.
I think Matts’ advice is good, (old guitar strings can be helpfull for “fishing”) but if you change your p’ups and switching often an accessible control cavity is a great thing, just be sure to drop all pots and such into the body and drill through the potentiometer holes so you know where to place template and assure router bit won’t hit anything dangling in the body.

Repetitive open-tunings are used for two non-Spanish classical-guitars. For the English guitar the open chord is C major (C-E-G-C-E-G);[67] for the Russian guitar which has seven strings, G major (G-B-D-G-B-D-G).[68] Mixing a perfect fourth and a minor third along with a major third, these tunings are on-average major-thirds regular-tunings. While on-average major-thirds tunings are conventional open tunings, properly major-thirds tunings are unconventional open-tunings, because they have augmented triads as their open chords.[69]

G&L is the evolution of Fender guitars, no doubt, is Leo Fender expressed by itself, amazing axe, nice sound, in tune, good wood, my ASAT SPECIAL have bird's eye wood on fretboard that looks and feels amazing, the MFD's pickups rocks! nice playability, nice sound, I'll keep mine a lot of a time, it must be on top 10, underrated guitar in my opinion
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: ibanez","reportSuiteIds":"guitarcenterprod","pageName":"[gc] shop by brand: ibanez","eVar3":"shop","prop2":"[gc] shop by brand: ibanez","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop by brand: ibanez","events":"event1,event31","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"ibanez","prop5":"[gc] shop by brand: ibanez","prop6":"[gc] shop by brand: ibanez","prop3":"[gc] shop by brand: ibanez","prop4":"[gc] shop by brand: ibanez","eVar1":"ibanez","prop9":"2875","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section","prop8":"ibanez"}
With modern recording systems, track counts aren’t usually much of a limitation any more. In addition to a mic’ed up amp or a feed from pedals into your interface, try to also capture a clean feed of the guitar signal if your amp or pedal board allows a direct output to be routed. If you record this as well as the amp / fx feed, you have another option to re-process the guitar recording in software if you decide the original feed isn’t right.
Picking out a guitar can be a bit daunting. And since there’s a lot of subjectivity involved, new players trying to pick out an instrument often find a lot of ambiguity and guesswork awaiting them. For someone buying their first guitar, the goals become fairly simple. Get a decent, budget guitar that you can afford and see if you stick with it. In so doing, avoid the worst guitars.
Rickenbacker is another famous American brand created in 1931 to build Hawaiian guitars, called "Frying pans" due to their typical shape. The brand incorporated guitars to its catalog a bit later. The models created by Roger Rossmeisl (Combo 4000 guitar, 4000 bass), a former Gibson collaborator and future Fender man in the 1950's, enjoyed a lot of success and became the brand's most typical designs. The 360, 370, 620, 660, and 4003 models can be connected to a Rick-O-Sound unit (a box with two mono outs) via a stereo 1/4" jack, which allows the two or three pickups to feed different amps. Most instruments have a dual truss rod and a varnished rosewood fretboard. Their distinctive jangle and chime emphasizes high frequencies, giving pretty good results with clean sounds. The Beatles, and especially John Lennon, often played Rickenbacker guitars at the dawn of their careers. Tom Petty, The Jam and R.E.M. are also Rickebacker users.
The arched top Strats all had maple necks, rosewood ‘boards, black hardware, Floyd Rose licensed locking vibrato systems, and slight finish variations. The SSL-1 had a single humbucker with a volume control that had a push-pull coil tap. This could be had in metallic black, purple burst, white pearl, red pearl, and pink fire. The neck on the early SSL-1 is described in different sources as having a stain finish or as having an oil finish; there’s probably a clue to dating sequence here, but I don’t know the answer.
There are few companies in the music industry that understand guitarists as well as Suhr. What other company can you think of makes excellent guitars, amplifiers and pedals? Whether you need the warm, vintage voice of a Badger or the paint-peeling roar of a PT-100... Suhr has a connoisseur level amplifier to scratch any guitarists itch. Stop in and a play a Suhr amplifier at Eddie's Guitars today. 
While most think of the history of American guitars in terms of American manufacturers, if you’ve followed this column you know the tradition is much richer. Among the major players in the American market were the many importers and distributors who enriched the guitar landscape with instruments – usually at the lower ends of the market brought in from other countries, primarily from Europe, Asia, and to a lesser extent, Latin America. The analogy with automobiles is obvious. While we tend to think of the automobile industry in ethnocentric terms, it’s impossible to think of “cars in America” without considering Volks-wagen Beetles, Toyota Corollas or Datsun Zs (Yugos and Renaults deliberately ignored).
This mod works great for Strat-type pickups or aftermarket Tele-style reproduction pickups that don’t already have a plate. Some pickup companies make P-90s that don’t have a metal base plate, and these can be twang-ified in this way, too. The best part is that, if you don’t like the sound, you can just peel the plate off and be right back where you started.
Let’s get it straight. Froo – Shawn – Tey. If you don’t know him, he’s the lead guitarist of the Red Hot Chili Peppers. Frusciante is the author of the brilliant chord progression on Under the Bridge, the haunting intro to Californication and the simplistic solo and riff on Otherside. If you’re the casual listener of the Chili Peppers, then you may wonder why John has made it so far up this list. But a tad of a closer look will reveal that his simple catchy riffs are the tip of the ice berg. One can catch a glimpse at his technical skill in the Dani California solo. A bit deeper and you’ll run into Lyon 06.06.06 in one of the B Sides. John takes his influences (Page, Hendrix) and mixes his own nuances into a sound that’s pleasantly different, but melodically having the same effects on you. A track to look out for on his solo work – Ramparts – showcasing four or so guitars layered upon each other in an introspective orchestra.
The Venue DI is essentially an amplifier without a speaker cab. If you go straight into a mixer or PA system this unit lets you customize your acoustic's tone in every way imaginable. While it's particularly ideal for someone who doesn't have an existing preamp in their acoustic rig, it outperforms most preamps that come standard in an acoustic guitar or even in an acoustic amp.
In 2017, Slash was named Gibson Brands' first Global Brand Ambassador. And to celebrate, Slash has designed his first Signature Firebird for Epiphone! Slash’s Limited Edition Firebird features the classic Firebird profile that has gone virtually unchanged since its debut in 1963 and is made with a AAA Flame Maple top and a 3-piece Mahogany body in a Translucent Black finish chosen by Slash. The traditional Firebird style pickguard is layered white and black and has Slash’s “Skull & Top Hat” log in red. The Mahogany neck is glued to the body with a deep-set neck tenon and has a standard 24.75" scale and a rounded custom "Slash" profile. The Pau Ferro fingerboard has single-ply cream binding with Pearl trapezoid inlays, a nylon nut, and 22 medium jumbo frets along with a 2-way adjustable truss rod. The back of the Firebird's traditional reverse headstock has Slash’s Snakepit logo in gold.

So last week I wrote about if it made sense to replace the speaker in an amp, or if it would be better to just get a different amp, I'll bet some of ya saw this weeks topic coming, right?  Once again I must begin by stating that even though we design, build and sell pickups here, we will NOT offer biased information (I promise); remember, we are real-world guitar players too.  Yep, we also need to carefully watch how we spend our money lest we find ourselves without a roof over our head!  And I mean really, I could take being homeless ... but I'd NEVER do that to a good GUITAR! Shall we dive in?
Wouldn't it be great if you could determine what price constitutes a "fair deal" before you made a deal? We think so. That's why we've created iGuide's Real Market Data (RMD) pricing, our proprietary system that does the research for you. It's a guide that gives you updated information on what you should pay for an item or what you should expect to receive - without having to spend hours researching. iGuide's Real Market Data pricing system is the internet's best guide to market value pricing and the only pricing system designed with the consumer in mind. Our exclusive RMD pricing is based on real sales data, gathered from auction sites in near real-time. This ensures you get the most accurate pricing available, as quickly as possible!

Growing popularity of the guitar in the early 1900s, fueled by the growing popularity of folk music and country and western music, led to a demand for louder and more percussive guitars. In response, many companies began to use metal strings instead of catgut. These became known as steel-string guitars. By 1921, Martin had focused production towards this type of guitar.

So far I’ve only tried this on breadboard, though I plan to deploy it in a new “parts” guitar I’m assembling. So far it sounds … really good. A lot like a ToneStyler, actually, but with fewer parts and handpicked values. The only tricky thing was finding a good pot value where all the action wasn’t bunched up at one end of the knob’s range. A reverse-log pot worked best for me—I got nice results with both a C500K and C1M.
Now, let’s consider the tone knobs. Eric Clapton was one of the first guitarists to realize the power within those unassuming plastic spinners. His famed “woman tone” sound during Cream relied on rolling the pots on his Gibson Les Paul Standard, SG or ES-335 all the way off and turning the treble and midrange of his superbly overdriven Marshall amps high. Similarly, jazz guitar players who are looking for a classic tone roll their pots back until they get in the Wes-Benson-Burrell-Pass-etc. zone.
P good...So Fun...Like most console gamers, I have greatly enjoyed the "Arkham" Trilogy by Rocksteady Studios, I say that because I did not complete Arkham Origins (Dev by Warner Bros.), however I did beat that now infamouse Deathstrokeboss fight but after that the game felt very recylced and I told my self I would for next-gen Arkham installment by Rocksteady....I was a fan of all three Batman games that came out last gen. Arkham Knight changes the formula just enough to keep it fresh, along with amazing graphics (best water effects ever) and Dual Shock 4 controller options, I know I'll be playing this game for quite some time.

Transistors are related to crystals. Their individual function is non linear and have to be arranged in compound groups to behave as a linear circuit. Solid-state amps operate at low voltages (10 - 100V). Valves amps operate at high voltages (200 - 600V). Speakers operate at approx (0 - 40V). The Output Transformer converts the high operating voltages of valves to the lower operating voltage of speakers. A transformer has 2 separate coils of wire (primary and secondary) wound around an iron core. Electricity flowing through wire causes a magnetic field around the wire and visa versa, a changing magnetic field causes electricity to flow through wire.
@Carl – Sorry to hear that you are having trouble. I am not clear on why this would be happening from the info you have provided. Can you please shoot us an email with details on the input and output connections and how each pedal is being powered when you experience this problem? Also, please also include a video that clearly shows this behavior, your connections, and how each pedal is being powered so that we have a better understanding of what you are experiencing.
A seasoned guitarist, however, makes use of restraint at the high end of the spectrum. What to an amateur sounds muffled and buried by the drums is actually the guitar sitting in its proper place in the mix, assuming the role of a rhythm instrument. When it is time for the guitar to jump forward, in a lead part for example, power and contrast can be now gained by unleashing a bit more treble. Here you can use your pickup selector, tone knob, volume knob (which also functions as a mild treble cut as it is rolled back), or a pedal such as an equalizer or overdrive.

An instant classic, and an easy guitar song that offers a simple, repeated section of just a handful of dyads, or two-note chords. It is one of the most recognizable guitar riffs of all time and it’s great for beginners to learn. The entire section is played with just two notes per chord, and it’s a progression that keeps your fretting hand in just a single section of the neck. Once you learn this riff, it’ll be tough to stop, since it sounds so good, and it’s easy to play. 
The EG-6N had a similar profile but tuners were mounted on a square-topped head with the buttons facing up. This had a dark square-ended fingerboard with dots and a single chrome-covered pickup with black center insert and exposed poles (same as on the SD-2L/4L), volume and tone control. The EG-8N was similar except for having a light fingerboard with black dots, and two of the chrome/black insert pickups, volume, tone and threeway select. A folding stand to hold the steels was available (this was a standard Teisco product from the mid-’50s on).
The above might sound like a trivial thing to mention, but achieving a loyal following of knowledgeable fans is not something that any brand can boast with. Judging by the rave reviews this product received it’s easy to understand why, and the 45 mm aperture drivers it operates with are proprietary to Audio-Technica, so you won’t get them anywhere else. Most headphones struggle with bass given their law diameter aperture, but the ATH-M50x renders sound accurately throughout the range.
The volume pedal is about as simple as a pedal can get. It is basically an external volume knob that you work with your foot. They are an excellent way to control the volume of your rig and can be placed at different places in your guitar chain. When placed first for example it can be great for volume swells (as we will see), reducing your amp gain by acting like your guitar’s volume knob. If placed after your gain section it will bring down your overall volume without reducing changing your tone or gain. You can really experiment with the placement of a volume pedal to see what matches your needs.
The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place between "jazz-clean" all the way to "blues dirty." If you're aiming high, Ibanez has an ARTSTAR for you.
Other unique features of this wonderful guitar are the 70’s styled headstock logo which effectively rounds out the look of this American instrument very nicely. Weighing just 7.2 pounds, the guitar is of pure single coil bliss! It sounds great as all Teles do and it plays like a dream. For every guitar lover, this is a true workhorse instrument to get.
The best course of action is to set a budget that is reasonable - right at the get go - while also considering the cost for other important gear like accessories, cables, amplifiers and effects, should you need them. A good rule of thumb to follow is that entry-level to mid-tier instruments are great for beginners, while more experienced players will want mid-tier to premium guitars.
Gruhn Guitars: If you're looking for a convenient appraisal that can be done online--something along the lines of what May Music Studio used to do--Gruhn Guitars offers an appraisal service. You must first send information and pictures of your guitar according to their guidelines. You must also include a payment for the appraisal fee, which varies depending on the instrument.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Ressort principal Butée Bloc de vibrato Tige d'arrêt Une fois la guitare correctement accordée, réglez le ressort principal pour faire en sorte que la tige d'arrêt soit en contact avec le bloc de vibrato et la butée. Si la tige d'arrêt n'est pas en contact avec le bloc de vibrato et la butée, réglez la vis de réglage du ressort principal jusqu'à...
Thanks for reading the fine print. About the Wiki: We don't accept sponsorships, free goods, samples, promotional products, or other benefits from any of the product brands featured on this page, except in cases where those brands are manufactured by the retailer to which we are linking. For our full ranking methodology, please read about us, linked below. The Wiki is a participant in associate programs from Amazon, Walmart, Ebay, Target, and others, and may earn advertising fees when you use our links to these websites. These fees will not increase your purchase price, which will be the same as any direct visitor to the merchant’s website. If you believe that your product should be included in this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.
The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
The model designations of the archtops are unknown. Later these guitars would have either a PE or EP model designation, so presumably the ones in the photo did, too. One appears to be a full-sized, thick-bodied archtop with a rounded cutaway. Not much is visible in the photo, but it apparently had a single, white-covered pickup at the neck, block inlays and a white pickguard. The other guitar had a single pointed Florentine cutaway and was slightly smaller than, say, a Gibson ES-335. It’s impossible to tell the depth from the photo, but it looks as though it’s a thinline. This, too, had a single white pickup at the neck, moveable adjustable bridge, trapeze tail, large white pickguard (not modelled on a typical Gibson shape, by the way), a little plastic plate on the lower bout with volume and tone, with white knobs. The fingerboard has large white dots, with double small dots at the octave. The f-holes are three-part; the headstock Teisco three-and-three.
The Epiphone Company is a musical instrument company which was founded in the year 1873. Epiphone is specialized in making Guitars and are one of the largest producers of guitars in the world. Epiphone has several ranges to choose from, as they brand them in different groups. Few of the Epiphone ranges of guitars are, Epiphone Sheraton, Epiphone Casino, Epiphone Texan and The Dot etc. Besides guitars Epiphone also manufactured upright basses, banjos and other forms of stringed instruments.
James Valentine of Maroon 5 has a strong idea of what he wants in a guitar and so, along with the craftsmen at Music Man, has created his dream machine. Valentine's desire was for a guitar that blends innovation and a modern vibe, with a reassuringly classic appeal - a bit Gibson semi, a bit Fender Tele perhaps. So, with that in mind, an ash body - in this instance finished in what Valentine calls 'Trans Buttermilk' ('Trans Maroon' is, of course, available, too) - has been mated to a nutty-looking roasted maple neck. This is delightfully figured and comes with Music Man's proprietary wax and oil finish for a tactile but drag-free experience. Build and finish are, as always, dead on. Pickups and controls are interesting: while both pickups are standard humbucking size, the bridge unit is actually single coil, its pole pieces slanted like a Tele or Strat across the chrome cover. Controls are simple, but with a couple of neat twists in the form of push-push pots on both controls - an active boost of up to 20dB on the volume, and a coil-split for the neck humbucker on the tone. We like the 'hidden' nature of these sonic extras, because it adds genuine usability but keeps things uncluttered and intuitive. The Valentine looks familiar but just different enough, feels great sitting or standing, boasts a real player's neck, and its palette of tones - delivered in a fuss-free manner by a clever control and switching setup - is simply superb. Of the hundreds of models that have sought to blend humbucking and single coil tones, this has to be one of the best electric guitars.

The body of the instrument is a major determinant of the overall sound variety for acoustic guitars. The guitar top, or soundboard, is a finely crafted and engineered element often made of spruce, red cedar, redwood or mahogany. This thin (often 2 or 3 mm thick) piece of wood, strengthened by different types of internal bracing, is considered the most prominent factor in determining the sound quality of a guitar. The majority of the sound is caused by vibration of the guitar top as the energy of the vibrating strings is transferred to it. Different patterns of wood bracing have been used through the years by luthiers (Torres, Hauser, Ramírez, Fleta, and C.F. Martin being among the most influential designers of their times); to not only strengthen the top against collapsing under the tremendous stress exerted by the tensioned strings, but also to affect the resonation of the top. Some contemporary guitar makers have introduced new construction concepts such as "double-top" consisting of two extra-thin wooden plates separated by Nomex, or carbon-fiber reinforced lattice - pattern bracing. The back and sides are made out of a variety of woods such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is chosen for its aesthetic effect and structural strength, and such choice can also play a significant role in determining the instrument's timbre. These are also strengthened with internal bracing, and decorated with inlays and purfling.

Another thing to bear in mind is pot taper. Two most commonly used tapers are linear and logarithmic. Linear taper, as name suggests, linearly increases resistance throughout it’s range. That’s ok for some applications, but not for volume pots. Our humanoid ears work in logarithmic fashion, so volume pots need to have logarithmic taper in order for us to hear smooth transition between quieter and louder settings. If volume jumps suddenly in the first 20%-30% of volume pot range and then does almost nothing in the rest of the range, it’s likely that you got a linear pot instead of logarithmic.
When you start to look for that great beginner's electric guitar, focus on an instrument with good-quality wood and reasonable workmanship. That's the most commonly accepted method of choosing a low-cost electric guitar for a beginner. Guitar manufacturers tend to cut corners with cheaper guitars by using, for instance, cheaper pickups and hardware. But for the guitarist who gets more serious about playing, these are all upgradeable parts that can be swapped out for higher-quality parts. So begin with a good-quality wooden frame and upgrade as time and money allow.
The reason: The dynamic range of music can exceed 60db (power ratio 1:1,000,000). Transients within the music can exceed 20db (power ratio 1:100). Therefore amps under 60Watts and ‘Single Ended Class A’ will not be discussed in this text. Valve amplifiers are used for applications such as guitar amplifiers, satellite transponders such as DirecTV and GPS systems, audiophile stereo amplifiers, military applications (such as target acquisition and radar) and very high power radio and UHF television transmitters
Practical - These sessions will involve exercising your fingers. For example, fingering chords would fall under this category, as the focus will be on getting physically comfortable with positioning and changing between chords, or experimenting with new strumming patterns. With lead guitar, the physical side covers techniques such as legato (you'll learn what that means soon enough!), string bends, speed drills and anything that involves the physical side of playing guitar.
A Direct Inject signal can capture the power-tube distortion sound without the direct coloration of a guitar speaker and microphone. This DI signal can be blended with a miked guitar speaker, with the DI providing a more present, immediate, bright sound, and the miked guitar speaker providing a colored, remote, darker sound. The DI signal can be obtained from a DI jack on the guitar amp, or from the Line Out jack of a power attenuator.

This list is insanely bad! First of all, John Mayer is only as good as your typical high school amateur. And before anyone starts spouting off, I’ve tried to find some obscure videos of him to prove myself wrong. But I can’t, it’s all Minor Pentatonic stuff with nothing innovative added to it. Secondly, how about some finger pickers on the list: Doyle Dykes, Scotty Anderson, Chet Atkins, Merle Travis, Tommy Emmanuel. Let’s not forget DANNY GATTON the greatest guitar player you’ve never heard. Also, if we’re talking about the best of the best, BRENT MASON should ALWAYS be in a Top Ten list, although he never is. But, you’ve heard him on all sorts of Nashville recordings. Acoustic guitar players like Andy McKee, Ewan Dobson, Don Ross, (I wish I knew more than that but I only recently discovered their Chuck Norris like awesomeness). Never limit yourself to the mainstream! There are many guitar players that are mentioned only because they are famous and have influence because of that. They may come up with a catchy riff or played in a well known band. But, that doesn’t make them a truly great guitar player.

Before recording commences, make sure that all of your equipment is in good shape and not producing crackles, hums and buzzes. If you are having problems, they can often be dealt with by using noise-filtering units such as gates and expanders. These are best used before post-recording effects – compression and reverb, for example – are applied, as a compressor will emphasise noise, while a gate might chop off the natural tail of the reverb.
The #1 cause of fret wear is the fretting hand pressure exerted by the player.  I have some clients that grip very tightly and wear frets quickly (Rob Fahey), and some that grip very lightly and take forever to exhibit significant wear (Jasan Stepp, Dog Fashion Disco/PolkaDot Cadaver).  Fret material hardness, string hardness and frequency of use all contribute to wear as well, but hand pressure is still the leading cause since frets do not wear themselves out.  Technique is different for every player, unique and personal and habits can be hard to change.  Just like brakes in a car, how hard and how much something is driven directly impacts wear and longevity.  Please see the refrets page for further thoughts on this topic.

“Top shelf” simply refers to any product that is sufficiently uncommon and/or of significantly high enough quality to place it “above” the rest of the “regular” crowd of products. In a shopkeepers parlance, the top shelf was where you placed things that you wished to be visible, but were, in actuality, were rarely sold. The best stuff was kept up and just out of reach of the daily rabble and only brought down when someone who truly appreciates the quality (and is willing to pay the commensurate price) came into the shop.

The Articulations page exposes all of the Shreddage II articulations to the user in a fully-customizable mapping scheme. The user can activate articulations via keyswitches or velocity ranges. The Engine page reveals the back end of Shreddage II for users seeking to tweak Shreddage II into the ultimate performance tool, with controls for velocity response, transposition, pitch bend range, resonance controls, pedal behavior, and control over noises like release and pick.
The Gallien-Krueger 800RB was a solid state bass amplifier head introduced in 1983 that was liked by bassists for its loud, clean sound and durable construction. It introduced the concept of bi-amplification, as it sent 300 watts of low register sound to the bass speakers and 100 watts to the tweeter.[6] The GK used a tube preamp simulator circuit called "boost". GK 800RB users include Red Hot Chili Peppers bassist Flea and Guns and Roses' Duff McKagan.[6]
This model stands out from the rest due to its modified Explorer body shape. It’s one of the more affordable guitars with such an exotic design. However, it not only looks good but it also sounds good as well. There’s enough juice in those pups to make any amp scream. Explorers aren’t really my thing, but I can’t say that Jackson JS32T Kelly was bad when I played it. On the contrary, it’s actually quite good.
I've been to Steve about a dozen times with my guitars, families and friends instruments and have sent several people there and have nothing but great things to say.  He is reasonably priced and likely one of the most talented and experienced Luthier's in Boston.  It's rare to see any establishment get 5 stars from so many people and Steve deserves it!  Only thing is, if you're in a rush to get your instrument back, go somewhere else where they do it quickly and without much thought/TLC.  Steve takes his time to do it right and has a lot of customers because he's the guy to go to in the greater Boston area. Highly recommend!

Mijn first guitar was a Epiphone by gibson sg, it was all right, then I got my gibson sg special(Around 550e), really good guitar, huge difference with the Epiphone. My next was, believe it or not another Epiphone, a Casino limited edition with bigsby, best price/quiality guitar ever(I paid 430e), beautiful guitar, and next week I’m getting a Fender Telecaster American vintage 58′(1755e), I’m very excited about it. I also own a Fender jazz bass classic 70s, it’s a mexican which plays like an american, very proud of this bass. First rate guitars are normally the best, you pay for the quality of the materials and the workmanship and experience, but there are exceptions with second range guitars, you can get very good ones, just good models or plainly good guitars, it’s nice to own both kind of guitars.
Some of the energy is not translated to string movement because it is lost. Where? To the body. Dependant on hardware and body composition, certain amounts of frequencies are absorbed by the body and therefore lost to be seen by the pickups. Body resonance is the OPPOSITE of what most people think. Those prevalent frequencies you hear ringing out of the wood are now unavailable to be transferred to the pickups. Remember, we can't create energy, only move it around. If a guitar is prominent in specific frequencies, it is only because other frequencies have been "removed" to make them stand out.
In 1942, Valco unveiled a new Hawaiian lap steel, the Irene, which was offered as a Silvertone in the ’42 Sears catalog. Clearly inspired by the Supro’s first wood-bodied Hawaiian with the pear-shaped body from ’36-37, the Irene had a slightly narrower body and more squared-off corners, and was covered in white pearloid. It also featured a light-colored, painted-on pickguard with dark position markers. Basically, this had the same pickup and control plate as featured on the Clipper.
I have a shecter omen extreme 7 and found that the factor strings they put on were nice for my small fingers. I had to replace because the factor set in general needed some tweaking and they changed all the strings. Now i don't really like the strings they put on. Too small. All they had listed for the strings were 24X jumbo strings. What string set should i buy since i play Ambient, soft, but also djent metal.
Alternatively – and often most effectively – you can fix phase issues in the digital realm. Record your two-mic signal on two separate tracks, then zoom in on the sound waves in each of the two channels in your DAW’s editing window until they are huge and you’re seeing the full up-and-down crests and troughs of the waves. Now, drag or nudge the sound wave of the ambient mic forward (i.e., to the left of the screen) a few milliseconds at a time until the sound waves line up perfectly. Listen again, and you should hear a very different blend that is fuller, richer, and more “together.”
A common theme with these models is the capability to easily access the highest notes of the instrument, alongside dual humbuckers and massive sustaining bodies.  The Explorer, much like the V, is now a very common electric guitar shape in the heavy rock and metal genres, but was widely used in other styles as well.  This is evidenced by one of the most famous Gibson Explorer players, Allen Collins of Lynyrd Skynyrd.
I didn’t want to spend much money (I’m a cheap bastard…part of me thinks I could never truly love a 59 Bassman unless I scored it at a yard sale for a hundred bucks. Now, tone matters more than money to me, but I tend to love the tone of crappy amps just as much as high enders, so I’d feel like a stooge dropping that kind of money on an amp. Especially since I play them and would ruin the collectable value of anything by gigging with it).
For those other performances, we run into limits of computer memory, computer processing power and computer programmers' time (and talent). With increasing processing power available in the consumer market, simulations are in some cases surpassing storage intensive sample libraries in terms of acoustic similarity and perceptive preferences. In guitar world, though, there seem to be no VST players of the simulation variety contending for top honors against leading sample libraries - of which seems to be the leading collection (unless you like something Vienna Symphonic Libraries has to offer)
As one user put it, this is one of “Amazon’s hidden little gems”, with a good set of tube electronics that gives out a natural sounding overdrive and some crystal-clear rhythmic sounds. If you want to make your guitar sound clear enough to accompany Porcupine Tree while also having the option for a natural grainy sound that might work well for jazz and blues, then this item is definitely something to look into.  
Revamp the entire company staff from the C.E.O. down to the lowest level managers. Give workers raises. Treat them like human beings. Be nicer and friendlier. Reduce stress levels and not have such a toxic atmosphere. Make the daily numbers actually feasible and actually attainable without having to work 15 hrs. to achieve them. Have accountability on all levels - checks and balances- from C.E.O. down to lower management. Recognize the workers are human, and not robots!
What would happen if four former Marshall employees got together? Well in this particular case, they formed Blackstar! Their product range includes hand-wired amps (the Artisan series) as well as products featuring different digital technologies (the ID:series). Plus, we have them to thank for the existence of the ISF system, a control that allows to switch gradually between American and British sound. In spite of the company's young life (it was founded in 2004), the brand already has many artists associated to its name like Silenoz (Dimmu Borgir) and James Dean Bradfield (Manic Street Preachers).
Well, I’m glad you asked. Don’t be fooled by the price and the size of this thing, as it’s a veritable Pandora’s box of effects waiting to be unleashed upon the world. You have over 75 onboard effects to choose from including distortion, compression, modulation, delay and reverb modelled on some of the biggest hitters in the industry, like the Boss DS-1, Metal Zone, Fuzz Face, Big Muff, Pro Co rat and many, many more. The team at Zoom have also thrown in a simulator to allow your guitar to sound like an acoustic.
Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.
Distortion effects are really like an overdrive pedal taken to another level. Many distortion pedals are simply overdrive pedals with the ability to dial in a higher gain setting (“Gain” can be thought of as the volume going into the overdrive components of the pedal). Some pedals will also have a built in equalizer to shape the tone of the distortion.
Electronics kit building kind of fell out of favor during the computer age as the home based technology enthusiasts moved to assembling PC’s, and software development. But home brew electronics has enjoyed a resurgence in recent years in what is now called the maker community. Internet electronics stores such as Adafruit and Element 14 are enabling 21st century geeks to build anything from simple circuits to complex embedded computing projects. These sites provide documentation, tutorials, video channels, and of course, a store, where you can purchase the tools and components required to internet enable your toaster, or feed your cat from the couch.
In 1960, Gibson experienced a decline in electric guitar sales due to their high prices and strong competition from Fender’s comparable but much lighter double-cutaway design, the Stratocaster. In response, Gibson modified the Les Paul line. This 1961 issue Les Paul guitar was thinner and much lighter than the earlier models, with two sharply pointed cutaways and a vibrato system. However, the redesign was done without Les Paul’s knowledge. Although pleased with the sound, he asked Gibson to remove his name from the instrument until they fixed a design issue with the neck.[18] This separation occurred in 1960, but Gibson had a surplus stock of “Les Paul” logos and truss rod covers, and so continued to use the Les Paul name until 1963. At that point, the SG guitar’s name was finally changed to “SG“, which stood simply for Solid Guitar. In addition to the SG line, Gibson continued to issue the less expensive Jrs and Specials (and the Melody Makers) with the newer body style. These, together with the Firebird, were the standard Gibson solid-body models until the reintroduction of the Les Paul Standard Goldtop and the Les Paul Custom guitars to the market in 1968.

This is an echo effect – every time you play a note it is repeated quieter and quieter, just like an echo. You can get a variety of different delay effects, from old-school “tape” echoes which are said to sound more natural, to analogue delay pedals and more modern digital ones. Digital pedals tend to sound clearer and a little harsher than their analogue cousins, making them more suited to modern styles such as modern metal.
Ostentatious Delays: If you're making very rhythmic music of any kind, it makes sense to use tempo-sync'd delays, to avoid undermining the main pulse. However, simple tempo-sync'ed delays tend to be masked by the main rhythmic stresses, so they sink into the background of the mix unless mixed very high in level, which makes it difficult to create ostentatious delay effects in rhythmic music without swamping your mix. One solution to this problem, very common in trance music, is to set a delay to a three-16th-note duration, which means that although the delay repeats never step outside the 16th-note grid, they'll often miss the main beats and therefore remain clearly audible. Mike Senior
Planning for this review started right after the January 2018 National Association of Music Merchants (NAMM) show in Anaheim, California. We didn’t notice any significant introductions in the under-$200 electric guitar category during our time there, but new guitars can appear at any time. We’ll be watching out for them, and we’ll get our hands on them as soon as we can.
Lastly, if you fancy yourself the next Slash, Jimmy Page, or Pete Townshend… you’ll want to pick up a Les Paul style guitar. It’ll get you that classic rock sound that you’re looking for. Les Pauls are equipped with “humbuckers” which produce a fat, meaty sound that’s rounder and less sharp than the single-coil pickups of a strat. The signal is also stronger so you’ll get more sustain.
Right-handed players use the fingers of the right hand to pluck the strings, with the thumb plucking from the top of a string downwards (downstroke) and the other fingers plucking from the bottom of string upwards (upstroke). The little finger in classical technique as it evolved in the 20th century is used only to ride along with the ring finger without striking the strings and to thus physiologically facilitate the ring finger's motion.
Determining the phase of pickups: attach pickup leads to an ohm meter, and then tap on the pickup with something metal, note direction the meter reading moves. Also note which wire is attached to the red test lead. Attach the nect pickup to the ohm meter, and tap on it. If ohm meter reading moves opposite of the direction it did for the first pickup, reverse the leads. When the meter reading moves the same direction, not which wire is attached to the red lead. it is the same as it was for the first regardless of it's color (i.e."hot" or "ground")
The 10.5mm string spacing allows for easy picking across strings, such as string skipping and hybrid picking. The snap and hold tremolo arm socket can makes it easy to load a tremolo arm, and the arm torque adjuster enables fine torque adjustment without any tools. The stud lock screws lock the stud bolts in place, for better tuning stability and resonance. The 2-point floating tremolo system allows for super smooth tremolo motion when either raising or lowering the pitch.
The biggest issue when starting out is not to get any bad habits with picking or hand/finger positioning. I'd highly recommend to find a teacher who - not necessarily on a periodical basis - would take a closer look at your progress and technique and make adjustments when needed. There are lots of bad habits that you can get and I'd rather spend some money on lessons than weeks of lifetime to undo those.
We certainly can’t have a best cheap electric guitars list without the awesome Epiphone G-400 Electric Guitar, Worn Cherry. In fact, this guitar will make most peoples’ “best guitars” lists thanks to the fact they’re built to such high standards and they sound absolutely fantastic. The budget friendly price tag makes it an affordable option for beginner guitarists, but you’ll often see these Epiphone SG models on the professional stages of the world thanks to the sheer playability and build quality.
WahWah ('Filter' category): What's a guitar rack without a Wah? Cubase's is really quite good: not only can you vary the band‑pass filter frequency, you can set high‑ and low‑frequency limits, and the Q at those limits. The frequency responds to host automation, but if you want to do real‑time pedalling, the WahWah shows up as a destination in any inserted MIDI track, so you just need a MIDI foot controller. Because insert four comes before the amp simulator, adding a wah there more faithfully duplicates the traditional rock wah sound, where guitarists patched it between the guitar and (usually overdriven) amp. The filter changes thus occur before distortion, which gives a very different sound compared to placing it after distortion. For more emphasis on the wah sound, you could remove the StereoDelay or StereoEnhancer effect, and place the WahWah in one of those slots instead.
Larrivee is much 'closer to home' and have been operating out of California since 2011. Although you can buy their instruments from Guitar Center and Amazon, and I personally like what I've read about their approach to lutherie, they didn't quite score high enough to make the final cut due to the method I used having a bit of a bias toward wide availability - I may rethink the approach if I revisit this topic.
Return authorization must be approved. Returns accepted based on R and B approval of unique circumstances that have been reviewed and agreed between R and B and buyer. Buyer must contact R and B Vintage Guitars with-in 7 days. Buyer is responsible for shipping charges back to R and B. Return payments will be made after successful undamaged return of the item.

So you want to learn how to play guitar but don’t know where to start? No worries. This how to play guitar for beginners guide will cover all the basic requirements to get you started with playing guitar. The guide is split into 2 sections: The Basics – where you’ll learn about the various parts of the guitar, how to hold the guitar and how to tune your guitar. Playing – where you’ll learn popular chords, strumming techniques, and how to read guitar tabs. This guitar for beginners guide is meant for guitarists just starting out, however there are also tips and

In late 1929, Martin built a prototype batch of six OM guitars. The very first of these had pyramid bridges and no pickguard. Martin soon realized that with the vigorous strumming required in a band setting, a pickguard would be required. Hence all OMs after the prototype batch had a small teardrop-shaped pickguard. The new OMs were not highly sucessful. They sold, but not as well as Martin had hoped. In 1933 the OM designation was dropped and was now called the "000" model. But infact the 1933 "000" models were the same as the 1933 "OM" models, retaining the OM body style and 14 fret neck. Then in 1934 the standard 000 models were modified to the shorter 24.9" scale (for unknown reasons, as the 12 fret 000 body had a 25.6" scale length its inception in 1902 to its demise in 1931). Yet the OM's longer scale was a major factor in the OM's tone. The strings on an OM must be tuned to a higher tension to get concert pitch. This extra tension translates into more drive on the top, hence providing more volume and tone. The OM's scalloped braces and a small maple bridgeplate give the OM a great sound. Although these features were common to other Martin models of the time, the OM's top brace under the fingerboard was missing. This design is unique to OMs making the top very lightly braced. This does lead to some problems with cracks in the upper bout along the side of the fingerboard, but it also contributes to the great sound of the OM models.
When I first tried multisourcing, on a solo project by Club Foot Orchestra guitarist Steve Kirk, I used an air mic, a direct source (Manley tube DI box or speaker emulator output from Kirk's Marshall JMP-1 tube preamp), a close mic on a clean-sounding Fender Princeton amp, and close and distant mics on a cranked-up Marshall cabinet (see Fig. 2). And that was just for the first rhythm track! As you may imagine, mixing was a lot of fun, and after that day there's been no going back to the old SM57 shoved up against the grille cloth. If you dare, you can take it from there. The only limitations are your time, the guitarist's patience, and available tracks. Oh yes-and lots and lots of mics.
You need to know what colour code your pickup wires are. If the 4-wire pickup is a Seymour Duncan then the link above should work for you, if it’s another brand of pickup then you’ll have to figure out how to correct for the appropriate colour wires e.g. DiMarzio pickups use a different colour code on their wires to Seymour Duncan and they’re all fairly easy to find on the web.
What? I have an early 90s pe and I've recorded with it and its one of the best guitars I've ever played. Beutifull clean lp tone and ballsy as when you dirty it up. I also have a pro 2 fullarton which with the fender lace sensor pups I put in it, plays and sounds as good as any strat I've played in thirty years. Check the new arias comming out of the states at the moment and they are really awesome looking guitars. There is also a reason the early ones are known as lawsuit guitars as Gibson though they were so good they had to sue them!
The four fingers of the left hand (which stop the strings) are designated 1 = index, 2 = major, 3 = ring finger, 4 = little finger; 0 designates an open string, that is a string that is not stopped by a finger of the left hand and whose full length thus vibrates when plucked. On the classical guitar thumb of the left hand is never used to stop strings from above (as is done on the electric guitar): the neck of a classical guitar is too wide and the normal position of the thumb used in classical guitar technique do not make that possible.

Epiphone Broadway Electric Guitar Make way for the Broadway, Epiphone’s big, bold and blindingly beautiful hollow body archtop guitar. The Epiphone Broadway has been a jazz club staple since the 1930s and it continues its soulful career with new appointments. The big-bodied Broadway features a laminated maple body with a select spruce top, a hard maple neck, a rosewood fretboard and Alnico Classic Humbucker pickups.
In August ’68, Ovation added three more models – the Hurricane 12-string and the Typhoon I and II basses, all with chrome hardware. The K-1120 Hurricane was a Tornado with the extra strings, advertised as offering a “harpsichordian” effect. This lasted only a year and was gone by ’69. The initial Typhoon basses had slightly smaller bodies than the guitars, with stubbier, more flared horns. These lasted only a year until ’69, when the body styling changed to that of the Gibson-style guitars. The K-1140 Typhoon I bass had one Schaller pickup and a covered bridge/tailpiece assembly. The K-1240 Typhoon II was a two-pickup model with a three-way select. This was also called the Williwaw (“mountain wind”) in some Ovation literature, but it was never really called that. The Typhoon I was only available in the stubby body and was discontinued in ’69. The Typhoon II changed model number in March ’70, becoming the K-1222. This model made it until June ’72.
When B.B. King heard T-Bone Walker, he "thought Jesus Himself had returned to Earth playing electric guitar." Walker invented the guitar solo as we know it, building a new style on fluid phrasing, bluesy bends and vibrato. It was the clear tone and melodic invention of his 1942 single "Mean Old World" that blew everyone's mind, and Walker refined his approach through hits like "Call It Stormy Monday." "I came into this world a little too soon," Walker said. "I'd say that I was about 30 years before my time."
The Japanese guitar industry in the '60s and '70s followed an interesting trajectory. At first, Japanese factories were tasked with building cheap emulations of American designs. As time went on, their output grew more unique and bizarre due to a particular Japanese artistic flair combined with an impulse to out-do mainstream American guitars they were emulating. This resulted in wild models from the likes of Teisco which featured exaggerated body angles and totally unique finishes and pickup configurations. Moving into the mid-'70s, the craftsmanship found at Japanese factories like the Fujigen plant rivaled that found in the US. This ushered in the controversial "lawsuit era" where Japanese brands like Ibanez built extremely close replicas of Fender, Gibson and other guitar brands.

Where can you find one? My guess is that FIDELITY was a housebrand (like Holiday or Silvertone), and these might be Valcos or some other maker. But I have since seen 2 or 3 of them on Ebay, not going for too much money. Also, there are several other brands (and no-brands) that look much like these, so keep your eyes peeled, don’t pay too much, and score a little gem that will have other guitar players saying “what the hell is that” and have your significant other shaking his or her head when the UPS/Fedex people come knocking.
Since joining Charley's team, Russell has worked on hundreds of guitars. Music shops across Dallas and Fort Worth call him with questions. He's even corrected other guitar masters' mistakes, and he's also repaired some of the music industry's finest guitarslingers, including the guitarist from Cold Play and countless prominent local musicians. "It's part of the joy is knowing that I'm helping put players in a position where they can get on stage and feel confident knowing their guitar is working at its peak." He's also probably the only guitar master on this list asked to restore a broken guitar back to its original broken state. But it wasn't just any broken guitar. It was Elvis Presley's Martin D-28. "Elvis had broken it." This guy is truly more than a guitar master; he's a magician performing musical magic at Charley's five days a week.
Guitar brands such as Antoria shared some Ibanez guitar designs. The Antoria guitar brand was managed by JT Coppock Leeds Ltd England. CSL was a brand name managed by Charles Summerfield Ltd England. Maurice Summerfield of the Charles Summerfield Ltd company contributed some design ideas to Hoshino Gakki and also imported Ibanez and CSL guitars into the UK with Hoshino Gakki cooperation from 1964-1987.[3] The Maxxas brand name came about because Hoshino Gakki thought that the guitar did not fit in with the Ibanez model range and was therefore named Maxxas by Rich Lasner from Hoshino USA [4].
With Dave Matthews playing an electric guitar in place of his usual acoustic, the band delivered a performance of “Samurai Cop (Oh Joy Begin)”, the lead single from Come Tomorrow, their record-breaking seventh-straight album to debut at #1 on the Billboard charts dating back to 1998’s Before These Crowded Streets. You can watch Dave Matthews Band’s performance on Ellen below:
It worked like all amps: the guitar in my hands translated the vibrations from its strings through magnetic pickups into a voltage that traveled through the guitar's wiring and out the main 1/4" cable, then the amp picked up the signal and sent it through a coil of wire around a much larger magnet than those in the pickups, and the vibrations of that magnet shook the cone of the speaker, producing sound. The specific vibrations corresponding to those voltages created specific frequencies of vibration through the air, and my 10-year-old ears were hooked.
1959 is widely considered to be the pinnacle year for Gibson’s mid-century solid body electric guitars, and no 1959 Gibson model is more famous than the sunburst Les Paul Standard. At first a commercial failure, the model was eventually adopted by some the world’s greatest guitarists – Jimmy Page, Duane Allman, Mike Bloomfield, Keith Richards, Eric Clapton, and Billy Gibbons, to name a few. The rarity and celebrity association of the model has pushed the values of original examples into the stratosphere. Gibson Custom’s 1959 Les Paul Standard is a painstakingly-accurate replica of these highly-valuable guitars rendered in detail so intricate that even the chemical composition of the parts has been scientifically examined and re-engineered – and that’s just one small example. Sonically, visually, and tactilely, owning a 2018 Gibson Custom Historic ’59 Les Paul Standard is as close as one can get to owning a priceless original!
There is a weekly newsletter that features lessons from different genres and difficulty levels. Whenever I open that newsletter I feel compelled to try out that featured lesson. I believe that this is a big reason why my guitar playing is improving so quickly. I am continuously trying out different styles and techniques and I get better overall while doing this and having fun.
The use of "full range, flat response" (FRFR) amplification systems by electric guitarists has received an extra impetus from modeling amplifiers. Before widespread availability of modeling, guitarists did not commonly plug electric guitars straight into PA systems or powered speakers, because most genres relied on the tonal coloration of a regular guitar amplifier setup—from the preamplifier, equalization filters, power amp, guitar speakers, and cabinet design. The FRFR approach assumes the tone is shaped by sound processors in the signal chain before the amplifier and speaker stage, so it strives to not add further coloration[20] or dedicated combo-style amplifiers with a broad frequency range.[21] Such processors can be traditional guitar effects, a modeling amplifier (without power amplifier), or a computer running tone-shaping software.[20] Using a modeling amp or a multi effects pedal used with line level output, a guitarist can plug in the guitar into a flat response mic input or into a keyboard amplifier.
On 2007’s self-titled effort and the new Nightmare, Avenged Sevenfold have continued to expand their sonic template, leaving Vengeance and Gates plenty of space to explore a range of different styles. At the end of the day, however, metal is metal, and at its essence that means killer riffs and shredding solos, which the duo unleash in abundance. A7X staples like “Bat Country,” “Almost Easy” and the latest single, “Nightmare,” are chock full of blistering rhythms and finger-twisting, speed-of-light leads, while they tread that sweet spot between catchy melodicism and all-out aggression.
View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.
Mostly everything about a guitar in this price range feels premium, and the sound quality and playability is enough to put a smile on any guitarist’s face. You also start to find advanced features such as brand-name pickups, active pickups, and EverTune bridges, as well as unique signature models that are too expensive for manufacturers to produce as a budget line.
@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.

Good results are usually achieved using a dynamic instrument microphone placed 6-8" from the speaker, off-center. If more low-end is needed, move the microphone closer in (2-5") for increased cardioid proximity effect. Use your ears or a set of headphones to find the "sweet spot" of the speaker. Consider miking the guitar itself with a small-diaphragm condenser in the area of the picking hand aimed toward the bridge, for extra string texture in the track.
Regarding the PDF download, I have not done so yet, but all of this info is available on the web, in color, ad nauseum. I bought the book to have at my bench so I could refer to it while wiring guitars. I do not have a color printer. I find the thought that, in order to experience what the book OUGHT to look like, you have to download a file, presumptuous, at best. Annoying, at the least.
One look around our shop and you'll see that we're serious about offering our customers a large selection of instruments, equipment and gear. You'll find both new and used instruments, and our top-notch staff are here to help you choose exactly what fits your needs, preferences and budget. If you're interested in learning new skills and techniques, check out the group workshops we host on a regular basis. We cover a wide range of music topics, so stop by and see what class we're holding next. Can't make it in? Give us a call at 505-889-6300, and we'll be happy to answer all your questions.
Like all Vintage electrics, it comes as standard with Trev Wilkinson designed hardware and pickup. The VS50IIK Vibrato system can take some serious abuse and yet still return to pitch time after time, thanks to the added inclusion of Wilkinson WJ07LH E-Z-Lok machine heads. Meanwhile, the Wilkinson WHHB double-coil pickups provide tight bottom end and crisp highs, perfect for a variety of genres.

Boutique quality instruments, available at prices that the masses can afford. Andrew strives to innovate with what he does with his instruments, from his unique bracing techniques, to the selection on soundboard woods to find the best wood grains for sound production. From his top-of-the-line custom made creations, all the way down to his Production series of guitars, you get so much bang for the buck.
The Duo-Sonic is a short-scale student model that has become highly prized for its excellent playability and tone, making it one of the best electric guitars for beginner guitarists with cash to spare. This updated model - with its slab alder body, flawless in sparkly Surf Green - features the classic offset Fender waist that gives the series its name. The three-ply white/black/white scratchplate also plays host to a chrome-tipped three-position pickup selector switch and knurled (aka easy-grip) volume and tone knobs servicing two pickups, a neck single coil plus a bridge humbucker. The latter is also coil-splittable via the push/pull tone knob. We've encountered guitars at more than twice the price that don't play anywhere near as well as this thing does. Oh, and it doesn't matter what size your hands are. If we had to use a song to describe the tonal range of the bridge pickup, we'll have Smells Like Teen Spirit, please. A clean setting here echoes the clattering rhythm voice of the song's intro while a fuzz box unleashes a racket not unlike the heavy sound Kurt craved. If it sounds like we're typecasting this guitar then rest assured the Duo-Sonic is versatile enough to handle country picking, surf, indie, classic rock, whatever. Plus, the neck pickup warms things up perfectly for clean or dirty blues lead or jazz chords.

Amazingly well made and a beautiful guitar. The finish is incredible, it looks like a guitar that should cost a $1000 and up. Mine is the red color and found it in a pawn shop looking very rough, price on it was $99 and at first I thought it looked like a $99 guitar so I didn't pay any attention to it. I was looking a some Epi SG400s and a couple of Gibson's but for some reason I went back to the Samick. I had some cleaner with me and I grabbed a rag and started cleaning it up, after a few minutes of scrubbing this beautiful guitar appeared. I plugged it in along with the Epis and Gibson SGs and played them side-by-side and I was amazed at the sound I was getting from the Samick. I compared it along with the other SGs and the finish and the build quality smoked the others. I am all about American made guitars but this Korean made SG has completely changed my opinion about Asian made guitars, especially when I compared it to a $900 Gibson. I wasn't even looking for a new guitar but I couldn't let this one get away. I bought it and have played it for hours every day for the last week. It's amazing, the neck is the smoothest and easiest to play that I've ever seen, I like it much more than my Ibanez RG with the Wizard II neck I've got. I am now looking out for other Samick Artists Series guitars and if you see one for a good price try it out.
We indicate and report to EMS Worldwide Express mail service that the guitar is sent with a lower declared value than the purchased price and as a gift so that there will be a possible exemption on custom clearance fees, taxes or you may need to pay a little amount but it is necessary, or the custom will open the package and revalue the guitar. Based on our experience, the custom fees in the Europe, USA, Canada, Australia and Asia are very minimal since we declared the guitar as a gift and lower purchased price in order to lessen the custom fees or even possible exemption and we have not received complaints from our valued customers regarding custom fees, taxes and tariffs.

It’s hard to definitively name the best guitar books. Everyone is working with a different skill set, and you’ve all built up your skills in a different way. However, all of the books below provide enough information to help you improve some aspect of your playing. They may help some of you more than others, but they all have enough helpful tips in them to justify their purchase. Our team read these and many more, and these were the titles we found most inspiring. It turns out we aren't alone in loving these books, since these books get great reviews all around, but these were the ones we found most enlightening. The fact that we were excited to practice and couldn't wait to pick up these books to learn more is ultimately the reason they made this list. We think these books will provide or build a solid foundation for anyone looking to learn the guitar in an efficient way.
This list kind of blows. There are no greatest guitarists. And I hate how people think guitar is sickly limited to rock guys who in the whole scheme of things are pretty amateur. How about Eric clapton? Heck if Charlie Christian or django rhinehardt had never started playing solos guitar would still be a strict rhythm instrument playing crotchets to emphasise the beat. He had 2 fingers and did more for the guitar than anyone on this list? Especially Tom Morello? How about pat methany, wes Montgomery, pat martino, tal farlow, JOHN MCLAUGHLIN, george benson? Listen to any of those guys and it will completely redefine your thoughts on the guitar. It can so easily be intelligent and soulful simultaneously…
Probably also new in ’39, though it could have been available as early as ’38, was the Supro No. 50 amplifier. This was a typical Supro rectangular cabinet, now with a round grillcloth broken by two horizontal strips of wood. A Supro logo plate sat on the upper left corner. It had a flat leather handle and five tubes putting out 12 watts through a 10″ speaker. There were two inputs, an on/off switch and volume control. Cost was $50.

Yowza, here’s another excellent guitar for rock and metal beginners. It’s similar in some ways to the Ibanez RG (a fast, thin neck, jumbo frets, 2 humbuckers, and a 3-way switch), but has some important differences. This guitar sports a compound radius fretboard, carved quilted maple veneer top, Les Paul-style bridge, and a bound fingerboard. Very classy appointments that aren’t often found in a beginner guitar. Jackson makes amazing guitars, and this one’s a beauty.
*VERY GOOD CONDITION, W/CD (NEVER USED)* PAYMENT is requested within 2 days or 48 hours of purchase.   FEEDBACK: Positive feedback and a 5 star rating is such an important part of the eBay rating system. Please contact me before leaving Neutral or negative feedback, I will try to help you. I will leave feedback when feedback is left for me!   SHOP WITH CONFIDENCE 😎   TRUSTED & ESTABLISHED SELLER!!

We’re bookending this article with two Epiphone guitars. Why? Because Les Paul was the man. And G-400 Pro was actually a successor Les Paul model from ’61 to ’68, making this guitar a true icon of rock, power, and endless sustain. With a mahogany neck and rosewood fretboard, this guitar has the looks and, with Alnico Classic Pro humbucking pickups, the tonal quality is excellent. 

Three full steps from standard tuning. Used by Dream Theater, Adema, Asking Alexandria on From Death to Destiny and The Black, Boris, Cannibal Corpse, Morbid Angel (on several songs starting with their album Covenant), Father Befouled, Sepultura, Jeff Hanneman of Slayer (on "War Zone" and "Here Comes the Pain" from God Hates Us All and "Not Of This God" from World Painted Blood. Kerry King used a 7-string for those songs), Mutoid Man (Stephen Brodsky started using the tuning during the recording of the Helium Head EP to fill in the low end of the sound, in an attempt to make up for their lack of a bassist at the time), American Head Charge, Nickelback (on "This Means War" and "Gotta Get Me Some" from " Here and Now" and Nevermore (when band switched to 7 strings).

Similar to five-string bass guitar tuning, seven-string tuning allows for the extra string a fourth lower than the original sixth string. This allows for the note range of B standard tuning without transposing E standard guitar chords down two and a half steps down. Baritone 7-string guitars are available which features a longer scale-length allowing it to be tuned to a lower range.
This is an echo effect – every time you play a note it is repeated quieter and quieter, just like an echo. You can get a variety of different delay effects, from old-school “tape” echoes which are said to sound more natural, to analogue delay pedals and more modern digital ones. Digital pedals tend to sound clearer and a little harsher than their analogue cousins, making them more suited to modern styles such as modern metal.
{ "thumbImageID": "LC100-Classical-Guitar-Natural/518978000010000", "defaultDisplayName": "Lucero LC100 Classical Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115036014", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Natural-1274115036014.gc", "skuImageId": "LC100-Classical-Guitar-Natural/518978000010000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115036008", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Black-1274115036008.gc", "skuImageId": "LC100-Classical-Guitar-Black/518978000001000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Some modeling processors fit the palm of your hand and you can place them on a tabletop and punch their buttons to select sounds and effects; some are almost two feet long, weigh as much as 10.5 pounds, sit comfortably on the floor and are operated by foot switches or rows of foot switches called pedalboards. Depending upon how sophisticated, complex and pricey your modeling processor is, you can have a huge sonic palette at your fingertips (or underfoot). Many of these units are MIDI compatible as well, allowing you to stream MIDI data to your computer or other recording device, or trigger other MIDI instruments. Just remember that for performance, you will probably be better off with a processor that is operated by foot switches; this allows your hands to remain free for playing your guitar or guitar synth.

Some steel-string acoustic guitars are fitted with pickups purely as an alternative to using a separate microphone. They may also be fitted with a piezoelectric pickup under the bridge, attached to the bridge mounting plate, or with a low-mass microphone (usually a condenser mic) inside the body of the guitar that converts the vibrations in the body into electronic signals. Combinations of these types of pickups may be used, with an integral mixer/preamp/graphic equalizer. Such instruments are called electric acoustic guitars. They are regarded as acoustic guitars rather than electric guitars, because the pickups do not produce a signal directly from the vibration of the strings, but rather from the vibration of the guitar top or body.