"Our expertise is to customize guitars according to the specifications of our clients and we have our own factory that recreates all major guitar brands, boutique brands and collectible guitars. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. These guitars are of the finest, and yet it is only fraction of the cost that you would normally pay. You may be wondering how such an amazing product could be so cheap, It is possible because it has been manufactured in China, where labor is cheap. Cheap labor does not mean that has been compromised; all parts are of the highest and have been imported from overseas. When purchasing this guitar you can only stand to win. If you are satisfied, you have just saved yourself hundreds of dollars! So go on, treat yourself to the guitar you have always wanted. Our 100% satisfaction guarantee allows you to buy with confidence!"
You have tonnes of distortion models based on the likes of the classic DS-1 (Dist-1) and Pro Co Rat (Squeak) pedals and more as well as boost, delay and modulation effects. An onboard tuner, stereo/mono looper with up to 80- seconds of phrase recording, tap tempo, stereo headphone output for silent practice and the ability to use up to 7 effects simultaneously.
An excerpt: “The Dobro brand name has been identified with resonator guitars since 1929 and is currently owned by Gibson Guitar Corporation. Despite its registered trademark status, the Dobro name has at times been used generically to refer to woodbodied instruments with 1) an aluminum cone or “resonator” mounted so that the cone opens toward the top of the instrument and 2) an 8-armed spider assembly supporting the bridge.”

My impression of the advice offered so far, is that compression on the electric guitar may solve the problem. However, I have found through experimentation and practice that a compressor used on an acoustic can highlight the more fragile aspects of it's sound, which when amplified can better compete with an electric guitar. I advise plenty of trial and experimentation before trying it in public, because compressors used incorrectly can create serious feedback headaches.

Pickup selectors can wear out over time. The lugs and the rotating switch can loose their tight connect with years of use. Also, many inexpensive guitars made today use cheap electronic parts. You may just want to upgrade your switch for more control and better selections. It is fairly easy to install a new pickup selector. Here are a few simple steps to replacing your pickup selector.
When I first plugged it in, it made a sound like it was "fretting out" if you put a bar at the twelfth fret position. That's a pretty good feat, given that the guitar has no frets. It turned out that someone had cranked up the pole pieces for extra gain, but had cranked them so far that the strings made contact with them when the guitar was played. A quick tweak right in the store with a jeweler's screwdriver sorted them out and revealed the lovely vintage sound of this little beastie. Supro developed a neat strings-through pickup system with staggered pole pieces that this guitar features.
{ "thumbImageID": "Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black/L21520000001000", "defaultDisplayName": "Fender Player Stratocaster Pau Ferro Fingerboard Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000219698", "price": "674.99", "regularPrice": "674.99", "msrpPrice": "675.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black-1500000219698.gc", "skuImageId": "Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black/L21520000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black/L21520000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Sonic Red", "sku": "sku:site51500000219699", "price": "674.99", "regularPrice": "674.99", "msrpPrice": "675.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Sonic-Red-1500000219699.gc", "skuImageId": "Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Sonic-Red/L21520000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Sonic-Red/L21520000002000-00-60x60.jpg", "imgAlt": "" } ] }
Martin’s first era of flirtation with electrics ended with its GTs, and, in terms of American production, wouldn’t resume until a decade later. However, in 1970 Martin joined the growing list of American manufacturers to begin importing guitars made in Japan, introducing its Sigma series. In around 1973, Martin, like competitors Guild and Gibson, began importing a line of Sigma solidbody electrics made in Japan by Tokai.
The brand’s biggest boom through the fifties and sixties was largely down to the birth of rock n’ roll. Thanks to their excellent hollow and semi-hollow models, Gretsch guitars were used by icons including Chuck Berry, Chet Atkins, Bo Diddley, and George Harrison. Since 2002 the production side of things has been run by Fender, although the Gretsch family still own the company.
Why We Liked It - Given the price, the hardware, and the attention to detail, this would undoubtedly be a contender for one of the best all-round choices on our list. There aren’t many other options that come from a premium manufacturer and give you all this for such a good price. The looks however will divide opinion. This is a must consider if they’re to your tastes however.

This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: hohner","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"hohner","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}

{"pageName":"[mf] pdp: ibanez dt52 destroyer series electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";H99039","linkInternalFilters":"javascript:,musiciansfriend.com","channel":"[mf] shop","prop7":"[mf] product detail page"}
The traditional Firebird style pickguard is layered white and black and has Slash's "Skull & Top Hat" log in red. The Mahogany neck is glued to the body with a deep-set neck tenon and has a standard 24.75" scale and a rounded custom "Slash" profile. The Pau Ferro fingerboard has single-ply cream binding with Pearl trapezoid inlays, a nylon nut, and 22 medium jumbo frets along with a 2-way adjustable truss rod. The back of the Firebird's traditional reverse headstock has Slash's Snakepit logo in gold.
Lists like these come down to personal taste, but since you like Ryan Adams you should give Uncle Tupelo’s album March 16–20, 1992 a listen. After Uncle Tupelo pretty much defined the modern alt-country genre with the electric guitar driven albums “No Depression” and “Still Feel Gone” they released one of the best acoustic albums you will ever hear.

Which got me to thinking about the history of American guitar companies. Many famous brands of guitars which started production here in the USA now exist as a name being used by an unrelated company for importing guitars into this country. Other brands are still being made but ownership has passed to one of a few big guitar companies. It’s difficult to trace this history without a “score card”.

Ukuleles were in highest production from 1916 to the 1930's, though still manufactured in quantity until 1965. Production quantities during some periods were as great as Martin guitars. Martin ukes are considered to be the best for craftsmenship and sound. The Koa wood models are more collectible than mahagony models. The fancier style 5 models are worth more than plainer styles 0 to 3. All sizes are collectible.
Paul has been great to work with, he's flexible, and knowledgeable on what works best for our son. Plus our lessons are in the comfort of our home! He always communicates with us on how our son is doing and if he needs to practice more, so he can show improvement on learning notes. Paul also purchased a bass guitar so he can work with our son on learning the bass as well. I also asked if he can help us shop and pick out a reasonable amp and he agreed to help out and suggested a few places to shop at. Working with Paul has made this experience easy as I was worried of finding a good fit for our son. I would recommend Paul to anyone and you can't beat his rate!
Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.
Smaller speaker cabinets with one, two, or four speakers, are more commonly used than the 8x10", because while the 8x10" cabinet is able to produce huge volume and powerful bass tone, the cabinets are very heavy and hard to transport. The 2x10" and 4x10" designs are popular for bassists who need less stage volume and an easier-to-transport cabinet to take to rehearsals and gigs. Some bassists own two or more smaller cabinets, such as two 4x10" cabinets. This way, a bassist playing a stadium concert on one day can bring both of her 4x10" cabs, but then if she is playing a nightclub show the next day, or going to rehearsal, she only needs to bring one 4x10" cab.

The person who made up the Top Ten list of best guitars has it all wrong! Of all the guitar companies he lists, Carvin is the only company that still uses ebony as standard material for the fretboard. This is because most other companies refuse to take the time and expense of this type of production. The others all use rosewood because it is cheap, relatively soft and can be "slammed" together quickly by machine; an indication of how they make their guitars in general! No other company who makes guitars even comes close to using the hand selected grade of wood (start to finish) that Carvin does. Take a hint from someone who knows how great guitars made step by step; if you want a guitar made from the best materials you can get, with critical operations still done by hand, order one one from Carvin, try it for ten days, if you really don't like it just return it... No questions and no hassles... Really. If you are not the type of person who cares, or are not willing to do ...more
While the number of effects may not be as many compared to recent releases, others don't have the same deep control and sound quality that the GT-100 provides. Speaking of control, instead of merely choosing your preferred amp, this processor lets you custom build your virtual amp and cabinet, an interesting feature that allows for even more freedom in crafting your own tones. Another feature that users are fond of is the ability to assign effects into its many footswitches, making the unit behave much like a regular pedalboard. Other notable features include polyphonic tuning and USB recording.

Double bass players performing in genres where the bass is slapped, either by pulling the string until it snaps back onto the fingerboard or striking the strings, such as traditional blues, rockabilly, psychobilly jazz, folk, and bluegrass often blend the sounds picked up by a piezoelectric transducer with the sounds picked up by a small condenser microphone mounted on the bridge. The microphone picks up the resonance coming from the body and the sounds of the strings being plucked, bowed, or slapped. The two sound signals are blended using a simple mixer and then routed to the amplifier. While many upright bass players use combo amplifiers, bassists in genres that use high stage volume, such as the punk-rockabilly genre of psychobilly use "bass stacks". Some jazz bassists and other bass players who play in small venues use specialized, expensive upright bass amps, like the Acoustic Image combo amplifier.
Some of the more distinctive specifications include, the headstock shape, tuners, neck and fretboard, bridge, and pickups and electronics. The headstock shape is based on PRS’s trademark design, but inverted to both accommodate Mayer’s playing style and also to keep a consistent length of string behind the nut, which makes staying in tune easier. The tuners are a traditional vintage-style, closed-back tuner, but with PRS’s locking design. The neck shape was modeled after 1963/1964 vintage instruments, and the fretboard has a 7.25” radius. The moment your hand grabs this neck, it just feels right. Like the tuners, the steel tremolo takes a classic design and incorporates PRS’s trem arm and Gen III knife-edge screws. The bridge on the Silver Sky is setup flush to the body in the neutral position so that the tremolo bridge only goes down in pitch. By keeping the bridge in contact with the body, the guitar itself is acoustically louder, which improves the signal to noise ratio of the single-coil pickups. The 635JM single-coil pickups are very round and full, with a musical high end that is never “ice-picky” or brash.
While anything with decent gain could be used for metal, a dedicated metal amp is the only thing a dedicated metalhead would want to use. These amps are actually very similar to other styles of amp, with one big difference – they are loaded with massive gain, which is essential for metal. A perfect example of what makes a great metal amp is the EVH 5150III. Designed with Eddie Van Halen, this all-tube amp head is an absolute beast in term of power and gain, with face-melting distortion and 50 watts of power.
This guitar is of the finest, and yet it is only fraction of the cost that you would normally pay. You may be wondering how such an amazing product could be so cheap, it is possible because it has been manufactured in China, where labor is cheap. Cheap labor does not mean that has been compromised; all parts are of the highest. We have our own factory that recreates them. Our version of Custom Shop Guitars is 95% same as the original in terms of quality and design, the parts are made and imported from China, Japan and Korea in order to manufacture the best musical instruments. When purchasing this guitar you can only stand to win. If you are satisfied, you have just saved yourself hundreds of dollars! So go on, treat yourself to the guitar you have always wanted. We use the best pickups; best tuning keys and other hardware. All of our guitars are custom made guitars. The Top Guitars specializes the world’s finest custom guitars, major guitar brands, boutique brands and collectible guitars. Owning the latest state of the art equipment, craftsmanship and skilled technicians. Our products are exported to Southeast Asia, North America and Europe. Our 100% satisfaction guarantee allows you to buy with confidence!

This company specializes in guitars meant for heavy metal and hard rock lovers. It is the proud manufacturer of some of the most outstanding designs in the history of metal such as Warlock, Bich, Virgin, and Mockingbird. It molded and influenced hard rock and thrash revolution of the 1980s. It is a great choice if you are looking for some edgy designs for your guitar. The guitars are available in 6, 7, or 8-string models that are suitable for players of all genres. Their recent introduction was the Villain series that has incredible designs and has a body of basswood or mahogany.

The Pro Series DK2 is a rugged, performance-grade workhorse that’ll do just as well on the stage as in the studio. It has a lightweight okoume body—a tonewood that shares many qualities with mahogany—as well as Jackson’s fast maple ‘speed neck,’ a compound radius ebony fretboard and 24 jumbo frets. A recessed Floyd Rose 1000 double-locking trem system completes the shred-friendly features on the guitar.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: acoustic guitars","pageName":"[gc] shop: guitars: acoustic guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: acoustic guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"extended range acoustic guitars","prop5":"[gc] shop: guitars: acoustic guitars","prop6":"[gc] shop: guitars: acoustic guitars","prop3":"[gc] shop: guitars: acoustic guitars","prop4":"[gc] shop: guitars: acoustic guitars","campaign":"4soswxxa","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Ibanez is a Japanese music instruments manufacturer that has produced some of the most iconic guitars of the 20th century. Established in 1908, the company started to design the first guitars in 1957. Ibanez was one of the first companies to gain popularity in the US and Europe markets. It also was the first to mass-produce 7- and 8-string guitars.
George Beauchamp was a vaudeville performer, violinist, and steel guitarist who, like most of his fellow acoustic guitarists in the pre-electric-guitar days of the 1920s, was searching for a way to make his instrument cut through an orchestra. He first conceived of a guitar fitted with a phonograph-like amplifying horn, and approached inventor and violin-maker John Dopyera to create a prototype which proved to be, by all accounts, a failure. Their next collaboration involved experiments with mounting three conical-shaped aluminum resonators into the body of the guitar beneath the bridge. These efforts produced an instrument which so pleased Beauchamp that he told Dopyera that they should go into business to manufacture them. After further refinements, Dopyera applied for a patent on the so-called tri-cone guitar on April 9, 1927. Thereafter, Dopyera and his brothers began to make the tri-cone guitars in their Los Angeles shop, calling the new guitars “Nationals”. On January 26, 1928, the National String Instrument Corporation was certified and, with its new factory located near a metal-stamping shop owned by Adolph Rickenbacher and staffed by some of the most experienced and competent craftsmen available, began to produce Spanish and Hawaiian style tri-cone guitars as well as four-string tenor guitars,mandolins and ukuleles.[3]
I think for somebody reasonable, the right answer would be that yes, it has an effect on the tone of the guitar and the notes coming off the strings, but not nearly as much as other factors in the design of the guitar. If you think I'm wrong then you should read more about the overtone series, the physics of sound, difference tones, and how sounds interact both as vibrations moving through air, and digitally as numbers in a computer. It's just not as simple as to say wood doesn't have a magnetic field so therefore it can't possibly affect the tone. It's true that much of what we hear is a result of the ear-brain axis, but there are also many fundamentally measurable physical properties of sound as it occurs over time (as all sounds do) that can easily explain why different types or shapes of wood could have a subtle but real effect on the tone.
When buying any instrument don't buy cheap. I've been playing 5 string for 36 yrs. The most important thing in a 5 string is the tone ring with a resonator. many good brands on banjo's. I have a alverez denver belle flat top tone ring, white eagle arch top tone ring but my favorite is a honher Artist flat top tone ring. Regarding a Good acustic guitar my favorite is a martin D-35 ease of play and tone are awesome. The tone is what you are after.
Salas is also bullish about the guitar’s prospects. “My 10-year-old son is at school in Austin, Texas and him and his friends are rocking out to 1970s funk,” he said. “A new generation is getting into guitar and rock’n’roll. I believe there’s going to be a massive comeback and that means with that style of music the electric guitar is going to make a comeback.”
Specs for your guitar include an ash body and carved maple top (rosewood was an option) bound with an abalone border, and a 5-piece maple/rosewood through-body neck. Other features include the bound 22-fret ebony fretboard with brass circle inlays, a matched-finish headstock with abalone border, 3-per-side tuners, two exposed humbuckers, and controls for each pickup. Its ivory finish is probably the most desirable color for this model, but the guitar was also available in a natural finish that highlighted the maple or rosewood carved top.

Many inexpensive starter guitars are built with laminate tops, made from several layers of wood pressed together. While laminate is durable and can be quite attractive, it will not produce as pleasing tones as solid wood. To a lesser extent, this is also true of the guitar’s back and sides—solid woods will produce better tone. When reading guitar specs, if you see terms such as “select spruce top,” that indicates the top is made of laminated woods with a spruce-like grain pattern imprinted on it.

Now that you’ve learned how to purchase a guitar, how to play guitar chords, and the basics of playing a guitar, you’ll just need to maintain practice! Use the ChordBuddy device as long as you need to, removing tabs as you progress. You’ll be ready to perform for your family and friends in no time at all. When you see how easy it is to finally practice and play the guitar, you’re not going to want to give up! See how ChordBuddy works, and discover how beginners, teachers, senior citizens, people with arthritis, and those with disabilities can play the guitar. To contact us, click here or call 877-947-2641.
Wah pedals can sound eerily similar to a human voice, and they were actually a favorite of Jimi Hendrix, who many have said possessed the most expressive guitar playing amongst all the great guitarists. Wah pedals are great to activate right when you’re about to take a solo and when you really want to make it sound like you’re speaking with the guitar.

Editor’s Note: My previous top choice, the Yamaha APX500iii, is now replaced with a newer and better model, the Yamaha APX600. What make’s it better, you ask? Well, there were some complaints regarding the previous model for having a lack of bass response and a “bland” sound when unplugged. Yamaha addresses this issue by changing the guitar’s bracing pattern, thus improving it’s overall sound response, making the APX600 a good choice for an acoustic-electric guitar. I suggest you go check this bad boy out.
“The tone thing is amazing because you can have one rig, have three different guitar players, and each guy can play the same exact thing and it’s going to sound different,” says L.A. Guns guitarist Stacey Blades. “It’s all in the hands.” Waara from Line 6 agrees. “Any guitar player will tell you, at the end of the day, it’s in your hands and you will sound like you will sound,” he says. The percentage of influence the hands wield is shockingly high.
I have a vox valvtronics amp I bought a while ago it has a real preamp tube and loads of very accurate effects great reverb 3 kinds good modulation effects awesome distortion and tube overdrive and very important it is easy to adjust effect level and a power knob that lets you adjust output 1 to 60 watts like a pr attenuator its great so you don't loose that sound of a cranked up amp when you don't want it to loud it also has a easy to use tuner this amp is very user friendly unlike some modeling and effects carrying amps and you can easily adjust effects levels with separate knobs no confusion also a pedal to control effects is available for about 50 dollars is a great studio or small gig still amp and saves a lot because all of the effects it offers its like having a vox tone labe on top of a amp exactly you can sound like van halen led Zeppelin pink floyd lady gaga or the beatles and more and the price is very competitive to all others in its category

The guitar pedal community is enormous. From the big name brands like Boss and Electro-Harmonix, to the lesser-known boutique effect pedal brands, such as Big Ear N.Y.C and Adventure Audio (the creators of the Fuzz Peaks pedal). This vast sea of guitar pedal manufacturers makes sure that if there is a tone or sound you are looking for – you can probably find a guitar pedal to do the job. However, sometimes you need something done your way, and that is where building DIY guitar pedals comes in.
Of course, no-one says you have to use the same mic on each speaker cone. For example the SOS interview with Toby Wright shows an SM57 and an MD421 on separate speakers, and Don Smith mentioned using an SM57 and an AKG C451 on separate speakers when recording Keith Richards. Sylvia Massy Shivy also uses the SM57+MD421 combination, but sounds a note of caution when deciding on the exact positioning of the mics: "You have to be very careful with phase, just check it until the signal is the strongest."
As of 2012 Taylor Guitars has more than 700 employees. The company maintains two factories: One in El Cajon, California and the other, 40 miles away in Tecate, Mexico where the entry-level guitars of the Taylor line (the Baby, Big Baby, GS mini, and 100-200 series) are made along with the Taylor guitar cases. In early 2011, the company opened a distribution warehouse in the Netherlands. Also that same year, the company, along with Madinter Trade, S.L., partnered to purchase the Crelicam ebony mill in Cameroon. [6]
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! VoteinNovember