By 1964, most of Orbison’s early rock and roll contemporaries were either dead, strung-out on drugs, in jail or making crappy movies, but Orbison’s musical career still hadn’t reached its peak. In between the ballads, he recorded singles like “Mean Woman Blues” (check his wild guitar solo) and “Oh, Pretty Woman” that showed upstarts like the Beatles, the Animals and the Rolling Stones that Americans still could rock harder than any Brit.
This multi-effects pedal lets you setup your virtual rig with up to five effects that include various modulation, distortion, compressor, delay, reverb and other effects. They can also run alongside the Zoom G1Xon's built-in amp modeling, which lets you choose between 22 different amps. Those are a lot of features in a small unit, thankfully Zoom implemented an interface that makes tweaking and configuring easier. As expected although you are still limited by two footswitches, it comes with an expression pedal, which adds even more to its value and usability.
Electric guitars have been popular and prominent for decades. For quite some time, being a left-handed musician was considered a hindrance and artists often had to make due with a right handed guitar. Now, there are plenty of fantastic options for lefties so they can make their mark on the music world. As a left-handed musician you probably know that many legendary artists were lefties too- Paul McCartney, Jimi Hendrix, Kurt Cobain, and Dick Dale are just a few examples of musicians who paved the way for up and coming lefties to seriously rock out. Electric guitars are perhaps the most notable and distinctive instrument in pop and rock music. Heavily used on stage and in the recording studio, the electric guitar provides some of the most memorable parts of a song or tune.
Dismantled Fender Telecaster neck pick-up, showing the exposed enammeled, very fine, copper wire, wound on a bobbin around 6 magnets sitting below each string. From Mojo Pickups - 50's Telecaster Rewind. In case you are wondering the metallic case (used to be high-chrome content alloy) acts as a hardware low-pass filter, dispersing the magnetic field of the high frequency vibrations of the string across all 6 poles, but allowing long wavelength, low group velocity, bass frequencies to be captured relatively unhindered— the reason for this is quite complicated and the subject of a solid state physics class which we will not go into here.
The 10.5mm string spacing allows for easy picking across strings, such as string skipping and hybrid picking. The snap and hold tremolo arm socket can makes it easy to load a tremolo arm, and the arm torque adjuster enables fine torque adjustment without any tools. The stud lock screws lock the stud bolts in place, for better tuning stability and resonance. The 2-point floating tremolo system allows for super smooth tremolo motion when either raising or lowering the pitch.
Also like Taylor, high-end Martin guitars can cost thousands of dollars and are out of the reach of many players. But the DRS2 Acoustic-Electric is an affordable guitar that will keep you under budget, and allow you to own a real Martin. It features a dreadnought body style for strong projection, and is constructed using a solid Sitka Spruce top, solid Sapele back and sides and a Stratabond neck. Stratabond is a strong laminate Martin has been using on some of their guitars in order to preserve some of those aforementioned tonewoods, and keep costs down. Richlite is another eco-friendly material, and here Martin uses it for the fingerboard and bridge.
{"product":{"id":"113900398","stock":"instock","price":"179.99","name":"Vintage 1960s Decca DM1-204 Natural Acoustic Guitar","download":false,"sku_id":"113900398","checksum":"134135816000","rep_id":"site5113900398","displayId":"113900398","sku_display_id":"113900398","sku_rep_id":"site5113900398","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
Around the same time as the 700-800 series of guitars there was also a line of acoustics. The steel-stringed "Folk Guitars" featured necks and headstocks very similar, if not the same as, the electric models. The nylon-stringed "Classical Guitars" featured slotted headstocks with the curly logo squeezed into the middle. The acoustics seem to be pretty well-made and often fetch pretty good prices on Ebay. One reader of this site even found a Kent banjo made in Germany. The lettering of the name is the same as on the 700-800 series instruments without the curly thingie.
{"id": "J40301", "categoryId":"site5AAG", "name":"Les Paul Special Vintage Edition Electric Guitar", "pageUrl":"/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Walnut/J40301000005000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"149.00", "priceMin":"149.00", "priceMax":"149.00", "msrp":"248.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"64", "brand":"Epiphone", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"20", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"93895071200", "priceVisibility": "1", "itemType": "New"}
Like his conversational singing, Willie Nelson's guitar playing is deceptively laidback, playfully offbeat and instantly recognizable. Amazingly, Nelson has been playing the same Martin M-20 classical guitar, nicknamed Trigger, since 1969; it has defined his sound, a nylon-stabbing mix of country, blues and Django Reinhardt's gypsy jazz. Though the guitar now has a large gaping hole, Nelson still plays it nightly. "I have come to believe we were fated for each other," he said. "The two of us even look alike. We are both pretty battered and bruised."
Without a doubt, Instant Guitar is a bit messy when it comes to sound quality, and from the looks of it on the web, others agree. First, there are incredible tones here; Cathedral mode is angelic and the low chord hits are drool worthy, to put it lightly. The problem is that the more you shape your guitar to sound like an actual guitar, the worst the sound quality becomes.
There are tons of different online retailers and ebay stores that you can find a great deal on parts and supplies, but those were just some of the ones that I have purchased on and been satisfied with their service and parts. NOTE: Do your research when it comes to parts and the quality of the parts you buy. I like to get feedback and reviews from Harmony-Central. You might not be able to get reviews on everything, but it helps you out allot.
Whenever I can do that, it’ll be a good day. Instead, we’re looking for a the correct combination of quality and cost, just like the aforementioned guitars. Ibanez usually gives you a great guitar for what you pay, so here we’ll narrow things down a little more and look at some of the best Ibanez guitars and "honorable mentions" for our greater list.

Humbucker pickups were designed to deal with hum while also offering tonal characteristics beyond those of single-coil models. This design incorporates two single-coils wound together in series, with the polarity of the magnets arranged opposite each other. This design helps to eliminate hum. Hence it’s name. Humbuckers usually have a thicker, louder, more powerful tone when compared to single-coils. While they are very versatile, humbuckers lend themselves to rock, heavy metal, and jazz styles. Famous guitarists who use humbuckers include Slash, Jimmy Page, Joe Pass, and Duane Allman.
It’s important to remember that these setups are not set rules that must be followed.  You can get a variety of unique sounds by placing your effects in unorthodox locations.  It’s common to run into that special sound that came about as a ‘happy accident’ when setting up your effects.  Using these suggestions, you can build up your own pedalboard to suit your individual taste.
He also opened the doors for left-handed guitar players by showing them that they too can master a musical instrument and make something unforgettable from it. In the same way that a “southpaw” boxer like Manny Pacquiao achieved unbelievable things in the ring, the gifted left-handed guitarist Jimmy Hendrix pushed guitar playing to its highest level.
Gut strings were the original strings for the classical stylist.  They were literally made from the guts of farm animals, mostly sheep.  The intestines and the process used to make these strings became more expensive than nylon and thus have fallen out of favor.  Even though you may hear the term “cat gut” strings, this style of string was never made from the innards of our cute, cuddly, feline friends… just the beasts we like tend to use as a food source.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Inlay: Custom - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black - Pickups: Ibanez - String Instrument Finish: Satin Oil, Transparent Black Sunburst
’71 blue vinyl combo guitar amps included the Univox 1040 and 1240. The 1040 Guitar Amplifier ($480) was a combo sporting 10 tubes, 105 watts RMS, two channels, four inputs, volume, bass, middle, treble controls for each channel, presence, reverb, tremolo, footswitch, and two 12″ Univox Heavy Duty speakers with 20-ounce Alnico magnets (possibly Jensens). The illustration shows a grille with two small circles on top and two large circles for the speakers. It’s possible this had a pair of tweeters in the small holes, but the description doesn’t say. The 1240 Guitar Amplifier ($399.50) featured eight tubes, 60 watts, two channels with the same controls as the 1040, and four 10″ Univox Special Design speakers with 10-ounce ceramic magnets (again, sound like Jensens). The grille had four round cutouts.
In the midst of the controversy, conservative commentators alleged that the raid was a politically motivated act of retaliation by the Obama administration, as Juszkiewicz had frequently donated to Republican politicians, including Marsha Blackburn and Lamar Alexander. Chris Martin IV, the CEO of Gibson competitor C.F. Martin & Co., had donated over $35,000 to the Democratic National Committee and Democratic candidates in the same time period. Though Martin featured several guitars in its catalog made with the same Indian wood as Gibson, the company was not subjected to a raid.[55] Following revelations in the 2013 IRS targeting controversy, the right-leaning magazine FrontPage declared that "there is now little doubt the raid...was politically motivated," and that "the Gibson Guitar case can hardly be dismissed as regulatory overreach. In hindsight, it was an ominous foreshadowing of the explosion of misdeeds we are witnessing today.[56]
The Effect: Boost pedals are essentially an extension of your guitar’s volume knob. Their main purpose is to give you additional gain to work with. This extra gain can be used to accentuate your solo sections, give you more girth in your clean channel, or even push your tubes into a slight overdrive. A great example of a booster pedal is the legendary Electro-Harmonix LPB-1.
Distortion and overdrive circuits each 'clip' the signal before it reaches the main amplifier (clean boost circuits do not necessarily create 'clipping') as well as boost signals to levels that cause distortion to occur at the main amplifier's front end stage (by exceeding the ordinary input signal amplitude, thus overdriving the amplifier) Note : product names may not accurately reflect type of circuit involved - see above.[38]
You think those guys are good? They are, but you should hear my uncle- Chris Lambert- and my cousin -Brent Lambert-. My uncle works at the Shadow Box in Columbus (or is it Cincinnati?) Ohio. He plays in a whole bunch of the music shows as a guitarist, and he rocks. Sometimes my cousin works there, too. Brent is just as good as my uncle, and they're both as good as the people you put on here.
Designed to be the greatest all-rounder, the Grand Auditorium shape was the perfect blend of size, shape, volume and comfort, and its modern-day incarnation has seen the likes of the biggest pop star on the planet these days, Taylor Swift pick one up. People forget that before mega-stardom, Taylor was a respected country artist, and it was on a Taylor Grand Auditorium that she plied her trade.
Awesome amp. This one sounds awesome and is not ice picky like some I’ve Owened before. This one sounds awesome and is in great shape (see pics for condition, few drinks, but nothing noticeable u less u are super close). Unfortunately I am listing this and my Jonny marr Jaguar since I need cash. Will only sell one item. If my guitar sells, this will be unlisted
To make a long story short, I ordered from Amazon two Epiphone EJ-200SCE guitars, Color: one Natural, one Black and the Hummingbird Ephiphone. My wife liked the black one. I liked the natural one. We decided to compare the two side by side, and sent for both of them. Later, my wife changed her mind and liked the way the natural looked and sounded. I had just listened to the Andertons review "What ones are the best, the ten times more expensive J 200 Gibson or the ten times more expensive Hummingbird Gibson comparing to the similar Epiphone EJ-200SCE and the Hummingbird Epiphone.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: first act","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"gretsch guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}

If you’re a very dynamic player who likes to play soft and loud, a compressor is a must have: by raising the soft parts and lowering / adjusting the loud parts, you will get an even sound that works for most applications and won’t make ears bleed: the simplest way to describe it is as an “automated” volume control. The EQ, on the other hand, is crucial if you have a problematic guitar, an amplifier with limited tone-shaping control or, simply, need a creative way to alter the way your guitar sounds. EQ can be placed in front of the amp for shaping the sound going inside the amp or in the send/return (after the amplifier section) as a volume boost/eq boost.
P good...So Fun...Like most console gamers, I have greatly enjoyed the "Arkham" Trilogy by Rocksteady Studios, I say that because I did not complete Arkham Origins (Dev by Warner Bros.), however I did beat that now infamouse Deathstrokeboss fight but after that the game felt very recylced and I told my self I would for next-gen Arkham installment by Rocksteady....I was a fan of all three Batman games that came out last gen. Arkham Knight changes the formula just enough to keep it fresh, along with amazing graphics (best water effects ever) and Dual Shock 4 controller options, I know I'll be playing this game for quite some time.

Gain – In simple terms, gain is the amount of power your signal is packing. There are a lot of stompboxes that come with gain boosters, which makes it easy to give your volume an instant bump when it’s time for a solo. But be careful of the creep if you add too much gain through too many pedals, or you might end up giving your amp more than it can take, which will throw your distortion out of control.
Best Songs of 2018Best Songs of All TimeBest Singers of All TimeBest Guitarists EverBest Eminem SongsBest Metallica SongsTop 10 Linkin Park SongsBest Green Day SongsRockerboyBest Albums of All TimeBest Female Singers of All TimehayreanmarjonBest Avenged Sevenfold SongsBest Beatles SongsGreatest Music Artists of All Timecamp0112Top Ten Best Music GenresRHCPfan
You don’t have to be a pro player to strut your stuff on an acoustic electric git. Beginners will enjoy the medium-low action the hybrid offers, the on-board tuner (on some guitars), and the convenience of not having to remain static on stage due to the limitations of a mic. With all that said, it’s time for you to narrow down your options with the customized lists you’ll find below!

These two components work in tandem to influence tone and playability. The bridge is mounted to the lower portion of the guitar body. The strings are routed over it before terminating on the body or on a tailpiece. Bridges are designed to compensate for varying string lengths, gauges, and metals, ensuring that the strings remain in tune with each other. Bridges usually allow adjustment of the string's length to bring each string into tune along the entire length of the fretboard. This process is called intonation, and is an important part of setting up a guitar for optimal performance. Some bridges permit string height adjustments that affect the the ease with which the strings can be fretted, and is often referred to as the guitar's "action."
Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
We’ve already made numerous allusions to the “split” between Merson and Unicord, so now is probably a good time to talk about it. At some point (almost certainly 1975), Ernie Briefel of Merson decided to part company with Sid Hack’s Unicord. 1975 is the logical choice because flyers copyrighted 1975 are still identified as from Merson Musical Products, a Division of Unicord, Inc, a Gulf + Western Systems Company. All flyers from ’76 on are copyrighted by Unicord, Inc., a Gulf + Western Manufacturing Company. Briefel’s Merson subsequently relocated to Long Island and became Music Technology, Incorporated (MTI). This company took the distribution of Giannini guitars with it.

Nothing compares to a Martin. The craftsmanship and attention to detail is impeccable, and the sound: the sound. The sound is like heaven. If you're used to an electric, a Taylor may feel more comfortable, but nothing compares to the timbre of a Martin acoustic. In the right hands, the bass and treble are perfectly actuated. None of that "tinny" Taylor quality which - while useful in certain applications and seems "easier to play" - cannot hold a candle to the the deep, rich, nuanced tone of a Martin acoustic. Bob Dylan, Neil Young, Johnny Cash, Willie Nelson, Woody Guthrie, Eric Clapton... Need I say more? I own a D-35, and I wouldn't be caught dead without a Martin guitar in my arsenal. Complete, unequivocal perfection.

If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
"Rocksmith 2014" is geared toward beginners and starts with the basics, like getting your guitar in tune. Then it'll pick a song based on your skill level. The earlier version's "journey" mode has been replaced by a "mission" mode (it is a video game, after all) with tasks like playing a song that "Rocksmith" recommends or hitting 75 percent accuracy. You get feedback after each run through a song, and you have tasks to check off as you play, like hitting five notes in a row. As you succeed, the game throws more tasks and notes at you, adjusting the difficulty as you go.
And, well do a whole lot of other little wonky sound-altering tricks that an engineer on the guitar factory (or a brave dude with a drill and a soldering iron) can think of. I've actually seen some people attach effect pedals to guitar bodies to have access to the knobs while they play (namely Zvexx Fuzz Factory comes to mind). Of course, that can also make the guitar look super high-tech with all of the switches, LEDs and knobs - to a less experienced viewer.
Most players will immediately think of the Jazz guitarist Charlie Christian, who brought the Gibson ES-150 to fame with the Benny Goodman Quartet.  Many top notch players realized that the tone these instruments could offer was unparalleled, and began to use them in their own illustrious careers, such as George Benson and Pat Metheny, alongside the other countless masters that wield these masterfully crafted instruments.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 

It’s big, it’s brawny and it’s bold—the Reverend Jetstream HB represents a ton of value for its price tag. Although it excels in rafter-shaking rock ’n’ roll tones, this offset guitar has a few nifty tricks that make it more versatile. Add to that quality construction and components, and you’re left with one of the best electric guitars under $1,000.

Many players use more than one effect – in this case, they place them next to each other on the floor, joining the output of one pedal to the input of the next using a small guitar lead called a “patch lead”. This allows them to use more than one effect at a time and toggle and combine them as they wish. Most players with multiple effects pedals attach them to a board, imaginatively called a… “pedal board”. This makes the pedals easier to transport and carry around. They set up and plug together all the pedals on the board, so when the user gets to a gig they can just plug in and play without having to set everything up again.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: guitar value packages","pageName":"[mf] shop: guitars: guitar value packages","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: guitar value packages","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"guitar value packages","prop5":"[mf] shop: guitars: guitar value packages","prop6":"[mf] shop: guitars: guitar value packages","prop3":"[mf] shop: guitars: guitar value packages","prop4":"[mf] shop: guitars: guitar value packages","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category"}
Seagull Maritime The Seagull Maritime acoustic guitars are made of all-solid tonewoods, making them a great option for those looking for the best acoustic guitar with a full sound. The top is made from pressure-tested solid spruce while the sides are made of solid mahogany wood for a well-balanced tone. The craftsmanship is superb and it has the sound quality to match.
When it comes to guitar amplifiers, especially the ones that we love here at PMT, “cheap” doesn’t mean poor quality! Thanks to huge leaps in manufacturing processes, stringent quality control and the fact brands really care about the products they create, you can spend far less on an amplifier and musical instrument these days and still get a fantastic, highly playable and superb quality option for your needs.
Gibson and Fender have been ripping the public off for years, they're not even close to being worth what they charge especially Fender with such a mass produced bolt on neck and lame finishes design. Carvin is a superior guitar in every way and what people fail to mention is that you can choose what wood and finish you would like as well as bolt on neck, set neck or neck through designs and their pick up's are impeccable. A truly great guitar co. With excellent customer relations and real musicians will all show respect for Carvin when mentioned if not already owning one.
Is it fine if I buy an electric guitar that’s worth <900$ as my first e.guitar? I don't know why it's recommended not to buy a guitar that's more advanced than my level. I mean this guitar will last me for years, so why not go for the best from the beginning? Also, I need to learn how to differentiate between the various guitars if some are better for lets say metal. I listen to a lot of Children of Bodom, Korn, Metallica and more.
The Univibe effect was produced to also mimic the sound of the Leslie rotary speaker, but in a slightly different way from the new digital pedals previously mentioned.  They often combine slight amounts of all modulation type effects at the same time to approximate the rotary sound, but became a unique sound of its own.  Some pedals allow some individual tweaking of each modulator, but most typically allow the user to adjust the speed of the Univibe effect.

The SimulAnalog Guitar Suite is an old but still popular free guitar effects program. It contains a set of VST plugins that emulate some of the most common used guitar effects and amps. It has simulations of five essential guitar effects which include Boss DS-1, Boss SD-1, Tube Screamer, Oberheim PS-1 and Univox Univibe. The SimulAnalog Guitar Suite was born out of an academic research and thus applies a zero deception, no marketing hype approach. The interface is very basic but the sound is said to obtain lass than -40dB of difference compared to the original hardware.
I am not satisfied with the sound I am getting from my guitar so I have decided to invest in a new set of strings. I bought an Electric guitar about 1 year ago and have not changed the strings as yet. Since it was not new when I bought it so I do not know how long they have been on it. I am not sure what the gauge of the strings are. I am trying to play lead. Should I go for a .,08 or .09 or a bit higher? I want to do bends as well.
This category of effects pedals does what the name implies.  It tweaks the volume of your guitar signal in some fashion.  These typically come in this spot in the pedal chain (after everything but the time-based effects) so that any change to your volume is already receiving the effects of all the pedals before it.  You’ll be altering your entire signal minus delays and reverbs.
{"pageName":"[gc] pdp: in store vintage vintage 196s maxitone bruno sunburst hollow body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";113206695;;;;evar65=Vintage-Guitars-In Store Vintage","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}
All I can say is 5+ STARS, holy smokes and WOW!!!! ALL that for $140 SHIPPED!!!! AMAZING DEAL!!! The guitar plays GREAT! The color is very beautiful! The sound is quite impressive for the little money spent!!! The little AMP is adorable and works perfectly. All the accessories are great and are the perfect 'icing on the cake'!!! You will need a better gig bag than the one the guitar is shipped with, the gig bag that comes with it is thin and good to keep the dust off but not much more. So, buy a nice gig bag that will fit and your guitarist will be travel ready! I highly recommend this guitar ensemble to everyone! For $140 SHIPPED, you truly won't be disappointed!
The top is made from spruce and features X-bracing, while the back and sides are made from basswood. The FA-100 also sports a very playable maple neck, with a rosewood fretboard and 20 frets. It would work very well for beginners, as it provides a defined, crisp sound that’s well suited to plucking or strumming, and good for everything from rock to country.
Speaking of versatility, pedals aren't the only type of multi effects units that you'll find here. There are also rack-mounted models like the Rocktron VooDu Valve Online Guitar Multi Effects Processor and the Line 6 POD HD PRO X Guitar Multi Effects. Looking for a case to store your multi effects pedal when it's time to pack up after the show? Check out the Gator G-MULTIFX - Medium Guitar Effects Pedal Bag and the Boss BOSS Bag L2 for starters. There's lots to see here, and it's worth taking the time to have a close look!
About the only thing that all these producers have tended to agree on across the board is that you should try to get your guitar sound as good as you can before you even think about recording. "The stupidest thing that any musician can do," remarks Tony Platt, "is to just plug in and play and say 'make that sound good'. It doesn't work like that. I will always say to the guitar player, for instance, 'Is that sound coming out of your amplifier the sound you want to hear? If it isn't, show me what it is and we'll try to get somewhere close to that before we even put a microphone on.' It's a waste of everybody's time to sit there tweaking stuff until somebody says 'Oh that's good.'"
String gauge refers to the thickness of the guitar string. This thickness in thousandths of an inch. The larger the gauge, the heavier the string. When describing gauges, guitarists typically omit the decimal, and speak only of the number (they will say an "eight" when referring to a string gauge of .008). There are both advantages and disadvantages to using lighter/heavier gauge strings.
Speaking of session guys, we have Joe Messina, but where are his partners Robert White and Eddie Willis? Or Dennis Coffey? There’s a whole slew of great musicians whose names get forgotten but whose playing we all instantly recognise – alongside the Funk Brothers, there are the likes of Buddy Emmons and Grady Martin from the A Team, and then there’s the Wrecking Crew and the whole LA scene. Someone has already remembered Glen Campbell but how about Howard Roberts and Ted Greene? Whoa! How can you guys have neglected Barney Kessel, truly a top ten contender?
If, like me, you have a short fuse, you might find yourself cursing to yourself when unable to nail something on guitar. Indeed, you might get so frustrated that you feel like, literally, nailing something into the guitar. If you do get to this point, it's because you're trying to move too far, too quickly. Your mind and fingers will struggle to keep up with your expectations if you're too ambitious or impatient.
The Ibanez GRX20ZBKN is part of the GIO series developed for players who want Ibanez quality in a more affordable package. The guitar is suitable for all types of music, but often a favorite of rock, metal and shred lovers. It features an alder body and a maple neck which feels sleek and fast. Great for moving quickly up and down the neck for those fast riffs and licks. A solid good looking low budget guitar for the beginner and intermediate.

It might be a little overwhelming when you listen to the song being played by the professionals. Try not to listen to all the extra filler that these musicians put into their music and focus instead on the chord progression. Think about the chords that go into making these songs, try to memorize them, and listen to when the chord changes happen in the song.
Takamine has been known for their high quality and highly affordable guitars for years. Their GD51CE comes in just under $500, and is a cutaway dreadnought. It is my top pick if you are looking for the best cutaway acoustic guitar under $500. It has a slim neck for great playability, something that beginners and experts both love. It has a spruce top with rosewood back and sides. You will also be able to amplify this guitar, as it is an acoustic electric. It comes in natural or sunburst finishes. Owners describe it’s sound as loud and balanced, which is expected of a dreadnought cutaway. You can’t go wrong either, as it has an onboard tuner. See more pictures and reviews of the guitar here.
Dorado is a line of Japanese made guitars imported and sold by Gretsch in the 70's. I am looking for a 5965 which is the smaller of the steel string line, had a sunburst finish, sealed tuning pegs and an adjustable bridge. The market worth is between one and two hundred dollars depending ....... Please post if anyone knows of a real good one with original case.
You’re probably not going to damage your laptop by plugging in a guitar. But take it easy. Instrument output is usually about 10dB louder than mic level and 10dB quieter than line level. But there’s a big variation between instruments, and of course, your guitar has a volume output. On an electric, it’s just an attenuator — there’s no active circuitry, the volume knob just knocks down the output of your pickups, some use it as creative control, some just to match a cheap amp better.
Of course, for the guitar string vibrations to have an effect on the magnetic field of the pickups, they too need to contain a ferromagnetic metal; this can be either iron, cobalt, or nickel. There are a large number of different string compositions, but often they will consist of steel, a combination of iron, carbon, and sometimes chromium. The chromium can help prevent corrosion, as it forms a layer of chromium oxide which prevents the string from further attack by oxygen in the air. Additionally, the strings can sometimes be coated with various polymer additives to help inhibit corrosion. However, these additives can sometimes have a negative effect on the tone of the guitar.

I'm unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar "Splender" claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.


I have a Norma single pickup electric guitar with 1 volume and the 3 position tone switch. Someone tried to repair the wiring (w/o soldering) so it didn’t work when I found it. I did some simple wiring/soldering and got it working and the pickup sounds great but I cant figure how to wire it so the tone selector works. Any help or a diagram would be great.
Hi there, Nicolas here. I'm all about continuous life-improvement and discovering your true-self so that we can find and attract beauty into our lives, be the best we can be, and enjoy life as much as possible. I have a passion for writing and publishing and that's why you can find me here. I write about the topics where I can share the most value, and that interest me the most. Those include: personal development, fitness, swimming, calisthenics, healthy lifestyle, green lifestyle, playing guitar, meditation and so on. I really wish to provide my readers with great value and for my books to be a source of inspiration to you. I'm sure that you will enjoy them and find some benefits! Stay tuned for some awesome books Wish you all the best, Nicolas Carter

• Gotta Feel It: Ultimately, what feels right under your fingers and sounds right coming out of your rig should determine your strings. It’s important to try different brands before zeroing in on a favorite. Judge a new set of strings by its brightness, sustain, tone and how easily they permit bending, fretting and picking. When a brand and gauge feel like buttah and sing like Circe, that’s the zone.
“But I was recently talking to a guy at Yamaha who told me the total global revenue from musical equipment sales sold round the world doesn’t add up to one-thousandth of Apple’s AAPL, -1.42%   daily turnover. It’s a small specialist market,” Hook said. “Gibson guitars are expensive and they have been taken over by so many cheap copies. That’s what has caused a lot of harm to such a luxury product.”

This is basically the same as having an entire studio’s worth of gear under your feet. You have 72 amp models to play with, painstakingly recreated from reference amps such as Vox Ac30 amps, Hiwatt Custom 100, Fender amps and more. There’s 194 effects to choose from ranging from distortion to modulation to delay, compression, wah – basically any effect you can think of! There’s also 37 cabinets that you can choose from which gives each amp model and effect a unique sound as well as 16 microphones which provide unique tonal qualities to your overall sound– we challenge you to get bored of this!
Great playing and sounding bass. The Ibanez BTB series in a 'very playable' 4-string version. Huge tone is delivered via 2 active pickups that feature controls for volume, bass, midrange, treble and balance. We believe the pickups are actually made by Bartolini. 'Locking' 1/4 jack. Solid wood, natural finish body. Rosewood fingerboard on maple neck. Tuning is accomplished via quality, 'sealed' tuning machines. Rock solid and stays in tune. Set up great! Currently has 'nylon wound' strings for a softer 'jazz' tone. Frets show virtually no wear. Body finish has VERY little wear. Includes gig bag.

The design of this guitar probably makes it stand out from the “crowd.” This is another awesome six string acoustic guitar from the brand Juarez available in sunburst and black . It is designed for the right handed and mostly comes in Sunburst color without a bag. The body is made from blackwood with the top laminated with Linden Wood. The entire structure has a natural gloss finish, with the fret board having up to 18 frets. The hardware structure has a chrome finish. Prices are quite fair, ranging from INR 2,790. Find more details below.

These chords will form the foundation of your guitar playing and are, thankfully, rather easy to learn. With a little practice and patience you will find them coming together quickly. The beginner guitar songs use the chords below and introduce them gently. These songs are a great way to build up your guitar foundations to a level of solid competency. By playing through them in order and being patient with each one you will quickly develop your skills.


Another consideration, and something you’ll read a lot about, is the pickups, which give the guitar its voice. There are two kinds of pickup in this price range: the single-coil (which gives a bright, sparkly sound) and the humbucker (which is fuller, meatier and perfect for rock and metal). Both are as common as each other in this budget range, and a guitar with a mix of both will offer you the best versatility.

Reverend guitars are known to sport many premium appointments despite their modest price tags. And the Jetstream HB is no exception. It has a comfortable roasted maple neck, a Wilkinson WVS50 IIK tremolo, pin-lock tuners and high-end electronic components. A korina body and a 12-inch-radius roasted maple/blackwood fretboard (depending on the finish) complete the other notable specs on this guitar.


I think for somebody reasonable, the right answer would be that yes, it has an effect on the tone of the guitar and the notes coming off the strings, but not nearly as much as other factors in the design of the guitar. If you think I'm wrong then you should read more about the overtone series, the physics of sound, difference tones, and how sounds interact both as vibrations moving through air, and digitally as numbers in a computer. It's just not as simple as to say wood doesn't have a magnetic field so therefore it can't possibly affect the tone. It's true that much of what we hear is a result of the ear-brain axis, but there are also many fundamentally measurable physical properties of sound as it occurs over time (as all sounds do) that can easily explain why different types or shapes of wood could have a subtle but real effect on the tone.
A companion to the Spectrum 5 guitar was a solidbody bass version with the Spectrum 5 body shape. This was the Teisco EBX-200/Teisco Del Rey EBX-200 Super Deluxe Bass. It had two small pickups with two center half-slots and two sliding on/off switches, with volume and tone and was described in the U.S. catalog as having the 5-ply ebony neck. The neck had the three-and-one hooked head and an ebony board with dots, not the picks.
Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.

Guitar has a vicious tone, nice wood, great p[ickups. However the guitar I received has a problem with the volume control acting as a tone knob and also cuts out sometimes. The guitar chord had to be replaced because it was cheap and cut out like a bad phone chord. I have to take it in to a local guitar shop and have the volume control fixed. Not too expensive but some additional cost. I didn't want to send it back as I otherwise love the guitar and didn't want them to send me a different one rather than just repairing it. Plus I don't want to wait that long. But certainly a great guitar for the money. No question.

It usually has 8 terminals – two poles with 4 terminals each. Each pole has one common terminal and 3 switched. The first thing you want to figure out is which terminal is common. Note that terminal on the left is connected to the lever all the time – that’s our common terminal. The other three terminals are connected to the lever only in certain switch positions. Represented as a schematic, each pole would look like this.
Next important control knob is usually labeled as time or rate. This defines the length of echoes in a reverb. You can have them short or you can have them last for a fairly long time. Which side you will lean more towards is going to depend on the nature and tempo of your music. Slower, more subtle riffs can easily deal with long reverb times while faster sections usually work best with short reverb. Again, experimentation is the key here.
The Fender Stratocaster features cutaway horns that give musicians access to higher frets. The back of the body is designed for comfort for longer performances. These guitars have three single coil pickups which transfer the string vibrations to the amplifier. They can all be turned on at once to produce a wide range of sounds. It also features a tremolo bar which allows you to lower or raise the pitch, much like tremolo pedals themselves, by pulling up or down on the bar to produce different effects. Stratocasters are the best option if you like to dabble in different playing styles and music genres.
However, if you want a small guitar that will give the quality of sound you might expect from a larger guitar, or if you are considering this style as the first beginner guitar for a child or student, you may want to consider other models that are more typical of a guitar suitable for learning, recording or for growing and developing better skills.

Combo guitar amplifier cabinets and guitar speaker cabinets use several different designs, including the "open back" cabinet, the closed back cabinet (a sealed box), and, less commonly, bass reflex designs, which use a closed back with a vent or port cut into the cabinet.[26] With guitar amps, most "open back" amp cabinets are not fully open; part of the back is enclosed with panels. Combo guitar amp cabinets and standalone speaker cabinets are often made of plywood. Some are made of MDF or particle board—especially in low-budget models.[26] Cabinet size and depth, material types, assembly methods, type and thickness of the baffle material (the wood panel that holds the speaker), and the way the baffle attaches to the cabinet all affect tone.[26]

Playing different guitars in a music shop is a great way of familiarising yourself with each model's unique qualities but don't forget to take off any objects that could scratch the guitar. A music salesman will let you try as many guitars as you like but may not be too happy about the little scratch your coat button left. Your choice of guitar will usually be based on the type of music you wish to play and the aesthetic appeal of the colour and design.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: lyle","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
Lunes-Domingo de 9AM a 7PM EST Customize Search Results for Your Location change location SitemapView Our SitemapContact UsBlogBy EmailPlace a Purchase OrderReturn RequestLet Us Help YouFAQsProduct ConditionShipping InformationPayment OptionsOrder VerificationReturnsNotice of AccessibilityAffiliate ProgramJoin Our Affiliate Program Follow zZounds on:

There is enough acoustic guitars in the world to rock it to sleep, with a peaceful feeling of spanish legends to it. On the other hand there are enough electric guitars in the world to guarantee that it will never go to sleep, because there is always an electric guitar playing somewhere in the world. Which is exciting and which also causes the prices for electric guitar amps to be lower than for the amps of acoustic guitars, while retaining the same level of quality. The Roland Micro Cube Guitar Amplifier is a tiny little angel in the form of metal and plastic combined. It is small enough to be easy to carry around and store wherever, but it is also powerful enough to attract the attention of anyone passing you in the street, sitting in the bar, or otherwise hanging out in your vicinity. With a punkish style and a punk attitude, it is the perfect little helper for any musician, beginner or otherwise.
Beginners, take note! We’ve changed a few things in this article of beginner-friendly electric guitars, which included removing a few older models such as Squier’s Vintage Modified ’51 and the ESP LTD M100FM. We then added some new and popular models, such as the stripped-down Squier Affinity Jazzmaster HH, the super-cool Dean Vendetta XM, and the compact Jackson JS1X Dinky Minion. Also expanded the guide part of this article.

Any guitar luthier will tell you that the choice of wood is the single MOST IMPORTANT factor that will determine the sound of your guitar. My junk guitar had a body that was made of cheap reconstituted wood shavings instead of actual solid wood. Junk material like that means your sound will also be junk. Any note I played didn’t sustain for more than a single second and it didn’t have that boomy lush sound you normally get from acoustics.


But this was different. This was build quality, and it completely wrecked the sound, feel and playability of the guitar. A competent pre-shipment QC inspection should have caught this and sent it back to be fixed at the factory, and they didn't. No serious guitarist would stand for ANY guitar made this way, at ANY price point. Yet there it was, on display on a guitar positioned as the flagship model of the brand, occupying the most expensive price point in the market.
One user summarizes market sentiment nicely by saying that the Yamaha THR10C is a phenomenal amplifier. Many of the commendations point to its great balance of sonic versatility and portability as its main strength, while others are pleased with its sound quality. Even experts are amazed by how it sounds, including Nick Guppy of Music Radar who commends it by saying: "While there are many small modelling amps around today, few of them look or sound as good as the THR." Build quality, USB recording convenience and the ability to run on batteries are also well received.

{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: davison","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"davison","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
© Frank Meyers and Drowning in Guitars, 2012-2017. Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Frank Meyers and Drowning in Guitars with appropriate and specific direction to the original content.
In order to achieve supreme neck grip comfort, the fretboard edge is finished with a smooth curve that extends from the border between the fretboard and the neck, and then to the surface of the fretboard. The detailed neck shape is precisely carved using a ball mill for ultimate consistency. The width measurements of the fretboard are at 42mm at the nut and 56.4mm at the last fret. These dimensions allow for an easy grip in the lower register, and a more modern feel in the higher register.
He has a way about him that makes you stop and listen, but he isn’t in your face. His sound is very melodic, which is why his tone was so perfectly matched to answering the needs of the vocals, yet he still holds his own in every tune. Bright, confident and edgy, he is a serious guitar-player and he has no intentions of holding back! People often say that he carries humour in his music, which is quite a clever characteristic to portray with this piece of equipment.
Jazz guitarist George Barnes is known to have played one of these prototypes in public in 1931, though far as I know, there's no recording of it.  Jack Miller played a "frying pan" in Orville Knapp's orchestra at Grauman's Chinese Theater in early 1932. Another musician, Gauge Brewer, bought two of the first available Beauchamp/Rickenbacher guitars, the other was a more conventional electrified Spanish guitar, and played them in a press event in Kansas, and a series of concerts around Halloween that year. Brewer also recorded both of these sometime in the mid-1930s, but it was one of the old direct-to-record recordings, a one-off, never released to the public (my Mom recorded a bunch of those 78s back in the 1940s and 1950s... tape wasn't quite there yet for regular folks).  Andy Iona was probably the first professional Hawaiian player to go electric.
Starting in the early '90s, music gear manufacturers began developing digital effects models that aimed to re-create the sounds generated by classic effects, instruments, and vintage amplifiers. This technology quickly expanded to include models of revered amplifier heads, speaker cabinets, microphones, and even specific microphone placements. Many amps and multi-effects units today incorporate a wide range of models, often grouped into categories such as stompboxes, amps, and mics. Over the last decade, Line 6, one of the leaders in this field, has even created guitars and basses that contain modeled sounds of famous vintage instruments. As the technology has grown more sophisticated, models have become more realistic, often very closely resembling the gear on which they’re based.
Many Rickenbackers — both guitars and basses — are equipped to be compatible with a “Rick-O-Sound” unit via an extra “stereo” output socket that allows the two pickups (or neck and middle pickup combined/bridge pickup, in the case of three pickup instruments) to be connected to different effects units or amplifiers. Another idiosyncrasy of Rickenbackers is the use of two truss rods (rather than the usual one) to correct twists, as well as curvature, in the neck.
A well-reviewed electric guitar with a high-quality design, the ESP LTD EC-1000 is the best electric guitar for the musician looking to upgrade their sound and achieve an exaggerated tone associated with the world of rock-and-roll. Both the body and neck of the guitar are made from mahogany with a rosewood fretboard, making this guitar lightweight in feel and balanced in design. The 24 frets come in an extra-large size for ease and comfort in chord changes, while the tailpiece and locking bridge make tuning  both easy to achieve and maintain. Output of the sound is well controlled with the toggle switch, and the model comes with two volume controls for different modes of play. Designed for the musicians with years of experience and a desire to play with a harder edge to their sound, the ESP LTD EC-1000 offers high-end features for a reasonable price. We’re huge fans of their entire EC series.
The new Martin electrics were offset double cutaway guitars which, in terms of shape, fall very loosely into a Stratocaster category. The cutaways are a bit wider and shallower than a Strat, both pointing away from the body. The horns are much more rounded than a Strat. Like a Strat, the waist is slightly offset, and the lower bout has a slightly asymmetrical slant to it. The bodies were initially built of hard maple and rosewood laminates that imitate the look of neck-through guitars popular at the time, but actually have neck pockets with glued-in mahogany necks. These had unbound 22-fret rosewood fingerboards, dot inlays and a distinctive three-and-three variation on the old Stauffer/Viennese headstock � which may have originally inspired Leo Fender’s Strat creation � with script CFM logo decal. (Prior to developing the Strat, Fender visited the Martin factory and was shown some of the old Stauffer/Martins with the round-hooked Eastern European headstock shape.) These all featured chrome Sperzel tuners, brass nuts, twin humbuckers, threeway selects, two volume and two tones with chrome dome knobs, and a Leo Quan Badass bridge.
Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Top Wood: Basswood (Tilia, Linden, Lime) - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 6 In-Line, Reverse - Bridge: Tremolo - Cutaway: Double - Hardware: Black - Pickup Configuration: S-H - Guitar Features: Pickguard - String Instrument Finish: Five Alarm Red, Desert Sun Yellow, Magenta, Black, White
Want to switch from pristine cleans, to vintage crunch, to face-melting distortion within seconds? You’ll probably want a modeling amplifier. Based on digital sound processing, modeling amps will combine many (sometimes hundreds) of iconic, vintage and modern amp sounds into a single unit, easily selectable at the twist of a dial or press of a button. Of course, the downside to modeling amps can be their recognizable digital tone, but when this means you have a whole guitar store worth of amps at your disposal it doesn’t tend to put many guitarists off.

For larger venues such as stadiums and outdoor music festivals, or for music genres that use bass instruments with an extended lower range and high stage volumes (e.g., heavy metal music, grunge, hardcore punk), bass players often use a more powerful amplifier (300 to 2000 watts or more) and one or more separate speaker cabinets (often called "cabs") in various combinations. Using a separate amplifier cabinet and speaker cabinets is colloquially referred to as a "bass stack". An example of the powerful, loud bass amplifier systems used in grunge is Alice in Chains bassist Mike Inez's setup. He uses four Ampeg SVT-2PRO amplifier heads, two of them plugged into four 1x18" subwoofer cabinets for the low register, and the other two plugged into two 8x10" cabinets.[7]
The Science of Electric Guitars and Guitar Electronics considers the electric guitar and related accessories from a scientific point of view. The majority of books about electric guitars try to avoid using mathematics when describing the scientific phenomena related to the electric guitar. However, mathematics is an invaluable tool in the design processes of all areas of technology, even when designing musical instruments and audio electronics. This book presents simple mathematical methods for modelling the electric guitar as a signal source for electric circuits such as effect pedals and amplifiers. In addition to modelling the electronics inside the electric guitar, the principles of operation of some vintage guitar effects and amplifier circuits are explained and analysed using systematic methods of circuit analysis. The book is intended for everyone who is interested in the design and analysis of basic analogue electronics used in the electric guitar and guitar-related accessories. The presented topics cover the whole signal chain from the guitar strings to the loudspeaker. Therefore, a solid foundation is established for creating own designs in guitar electronics using basic components of analogue electronics.
I have a Kona Signature Acoustic with beautiful inlays in the wood. I believe the body is mahogany, decent resonant tone, and once I shimmed up the saddle bridge (which technically should have been replaced all together due to notching), sounds better than my Martin in many ways, where it better distributes the low, high, and mid-range tones. The Martin is too bassy sounding, but have ordered new bone bridge saddle, which hope it improves the cheap plastic one it came with...
A great player knows a guitar is more than a few pieces of wood and metal.  Every Whalehazard guitar is handcrafted with incredible attention to detail and meets exacting standards of quality.  Each instrument is built in South Minneapolis by Andy Webber.  As a one-man operation, great care will be taken to make sure your custom guitar will take your playing and sound to a new level.  All materials and components are carefully selected for quality and longevity.  Designs are painstakingly contemplated and are constantly evolving.  From custom inlays to a hand-shaped bone nut, every detail of your instrument is studied and considered to make sure your Whalehazard guitar is a unique piece of craftsmanship that will stand the test of time.
The Givson Guitar Corporation makes guitars which sell under various brand names and are considered as among the best guitar brands on the planet. The company is famous to have devised the arch top guitar and created a few of the most iconic instruments in guitar history. Some iconic versions are the SG, Explorer, Flying V, ES 175 as well as the Firebird. The Les Paul Melody Maker is a popular model amongst many guitarists in different countries.

We recommend you choose the headstock shape that appeals to you most. The shape of the headstock does not significantly affect the sound or performance of the instrument. Some of our headstock shapes are pointier, which means they can get damaged more easily when dropped or bumped. Choose from our existing shapes, or, send us a drawing of your original design - we can build that, too!


Due to the good critical response received, the ATH-M50x can be considered the flagship of Audio-Technica headphones, and it definitely doesn’t disappoint. It’s clearly a professional product, so much so in fact that philistines who dare compare it to models directed at casual entertainment get verbal beat downs in comment sections from its many fans.

Alibaba.com offers 50 german guitars brands products. About 34% of these are guitar, 30% are wood router, and 6% are other musical instruments & accessories. A wide variety of german guitars brands options are available to you, such as free samples. There are 50 german guitars brands suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of german guitars brands respectively. German guitars brands products are most popular in Western Europe, North America, and South America. You can ensure product safety by selecting from certified suppliers, including 22 with ISO9001, 4 with BSCI, and 2 with FSC certification.

I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?


The wonders of digital delay arrived on the pedalboard in the early 1980s with what seemed massive capabilities of long delays, clean signal reproductions, and the endless fun of one, two, or up to 16 seconds of looping delay. In many cases, in the early days, reproductions weren’t really all that clean (or were cleaner than analog, but colder and harsher too), and many delays were prone to digital distortion if pushed, or poor resolution on the decay of the signal. Even so, the techno-power of the new technology stamped all over the bones of the old analog delay units, and for a time threatened to bury them entirely.

This can all get a little tricky and can become overwhelming especially if you have never tackled this type of job before. If this is the case, I strongly suggest starting with one of the easier models in regards to wiring e.g. Telecasters are significantly easier to work on as the scratchplate will often be pre-loaded with pickups. However, if you purchase a kit guitar such as an LP or you want to upgrade your electrical components (which is often the case with an entry level kit) understanding some basics about guitar electronics is useful.


Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
PRS recently started using quite an old idea (first suggested to us by guitar/amp technician Brinsley Schwarz). You simply add, in series, a resistor between the pickup ‘tap’ wire and ground. This mod, “doesn’t completely cancel the slug coil,” explains Smith, “it sort of three-quarters coil cancels. It allows some of the other [slug] coil through. It’s also slightly hum- cancelling.”
A guitar amplifier (or amp) is an electronic device or system that strengthens the weak electrical signal from a pickup on an electric guitar, bass guitar, or acoustic guitar so that it can produce sound through one or more loudspeakers, which are typically housed in a wooden cabinet. A guitar amplifier may be a standalone wood or metal cabinet that contains only the power amplifier (and preamplifier) circuits, requiring the use of a separate speaker cabinet–or it may be a "combo" amplifier, which contains both the amplifier and one or more speakers in a wooden cabinet. There is a wide range of sizes and power ratings for guitar amplifiers, from small, lightweight "practice amplifiers" with a single 6" speaker and a 10 watt amp to heavy combo amps with four 10” or four 12" speakers and a powerful 100 watt amplifier, which are loud enough to use in a nightclub or bar performance.
As mentioned above, the Martin DSR2 comes with an all-solid wood body, with traditional solid spruce as its top. In conjunction with the solid sapele back and sides, this configuration produces premium level Martin dreadnought tones, albeit with stripped down aesthetics. The neck is as familiar as it gets, with its 1.75" nut width and 25.4" scale length.
It is a popular technique in which the player's thumb or index finger on the picking hand slightly catches the string after it is picked, canceling the fundamental of the string, and letting one of the overtones dominate. It is used by popular guitarists such as Eddie Van Halen, Steve Vai and Joe Satriani who utilize the tremolo arm and high gain amps together with the pinch harmonic to produce horse-like wails from the instrument. - winner333
There are a huge number of different style tone controls in musical equipment; this hardly scratches the surface. If you’re interested in what your tone controls do to your sound, agood place to look is at Duncan’s Amp Pages, where there is a tone stack calculator that shows frequency graphs of several different types of tone controls. Check out http://www.duncanamps.com/tsc/ for more info.
As for the nuts and bolts of digital delays, any thorough, from-the-ground-up explanation is more than can be entered into in this space (and most of you at least know the basic principle behind binary encoding by now anyway, right?). Simply think of the digital delay pedal as another form of sampler: it makes a small digital recording of your riff, and plays it back at a user-selectable time delay, with depth and number of repeats also more or less selectable. The higher the sample rate, the better the sound quality. Early affordable 8-bit models really did leave a lot to be desired sonically, but as 16, 20 and 24-bit designs emerged, the reproduction of the echoes increased dramatically in quality.

Modeling pedals use a host of methods to make your guitar sound like it’s coming from a specific sound source. For example, there are many pedals out there that are designed to model the sound of classic amps. This allows you to plug your amp and pedal straight into a PA system or even a pair of headphones, while maintaining the characteristics of the amp the pedal is modeled after. This also helps you avoid having to carry your amp with you everywhere you go.
Fujigen Gakki is a musical instrument maker located in Matsumoto, Japan. They began making violins and classical guitars in 1960 and electric guitars in 1962. Their real heyday of guitar production began in the 1970’s when they began producing guitars for major American manufacturers like Fender and Gibson as well as some Japanese manufacturers. In fact, after CBS acquired Fender Electronic Instruments Company they decided to move to larger manufacturing facilities. Between the closing of the old factory and the opening of the new one, the only Fender guitars being made came from the Fujigen Gakki factory. Other factories have been used to manufacture Fender guitars, some for the Japanese market only. Regardless, Fenders made in Japan are considered top-quality.
“Ceramic is a much more powerful magnet again [than Alnico V]. The bass and treble get boosted significantly. A lot of people think ceramic magnets scoop the mids out, but when you analyse it you find the mids tend to stay where they are – it’s just that the bass and treble get boosted so much you get a V-shaped taper in the EQ. Ceramic pickups tend to suit players who need a very fast and percussive pick attack.”

Another great thing about this guitar is the Min-ETune system that offers 16 tuning presets. This not only makes it super quick to tune your guitar for everyday use, it’s also great if you need to tune your guitar up or down. It saves you a lot of work and time! It’s also a feature that makes these electric guitars for beginners who don’t know how to tune their guitar, and even if they of course can use a tuner this is still a faster option.
Now, to answer your question I would have to point out a series of popular brands and what they are popular for. After that, you make a decision on which one is best for you. You might see where I’m going with this. There is no single best guitar brand the same way there is no single best car brand. But we do have the Ferraris and Lamborghinis, as well as the Toyotas and Nissans of the guitar world!
THE CONTROL CAVITY Routing the control cavity is just as important as the neck pocket but with a couple more steps. The best thing to do is to cut out the plastic cover. Trace the pattern that you came up with for it on the plastic then cut it out with a jig saw. Use a fine tooth blade to prevent the plastic from chipping and will also yeild a smoother cut. Once this is done, take your template and reverse it, trace the patern on the back side of the body. Next set your router to a depth that is the same as the thickness of the plastic plate and rout the cavity working out to the line you drew. I do this free hand since the first cut is too shallow for a template. Be careful when you do this and test fit the plate you cut to make sure you get a goo fit. Then you will draw another line about 1/4" along the inside of the cavity you routed out, leaving extra room in areas for the screws you will use later on to secure the control plate. Rout this area out in the same way, working out to the line you drew. When you start to get close to the half way point in the wood start to think about how much wood you need to leave at the bottom. Usualy 1/4" is good but make sure you are careful! I miscalculated once and ended up going all the way through the body. Bad experience.
These guys are great! I took my Martin in for a refret, and it might have been the cleanest I have ever seen it done. Played better than it did when I got it. So after that show of quality work I took... my old Guild to them. It had developed a little belly bulge and warped top. Mark got that thing sounding and playing like brand new. They are priced honest and fair, and do work in a very timely manner. I am done looking for my guitar shop. I highly recommend these gentlemen. See More
Hybrid picking is a technique that makes use of both the pick and the remaining pick hand fingers. On the surface, it’s more versatile than playing with just with a pick. Digging deeper, you’ll learn hybrid picking has the same, yet different mojo than fingerpicking as well. At the end of the day, this technique is a very powerful one that will enable you to play things that would be otherwise impossible. Be it oddly accented phrases to wide interval licks to more intricate chordal ideas, hybrid picking opens up in credible options.
Thirdly, yamaha has been known for musical instruments for a long long time and is the biggest producer of musical instruments. On its logo, it has got two tuning pegs meaning unlike any other musical brand, it is the most diverse. The only reason that people say fenders and gibsons are better is because they were the original makers of contempory electric guitars and the fact that they're well known. So basically, all you're paying for is the badge.
For acoustic players, the Rogue Beginner Acoustic Dreadnought guitar with Accessory Pack comes highly rated. Included within this pack is Rogue's exceptionally crafted beginner acoustic dreadnought, along with a Musician's Gear Tubular Guitar Stand and premium Pearloid Celluloid pick, an Ernie Ball polish cloth, and 12 80/10 Bronze acoustic guitar strings. Overall, it's a worthy yet affordable pack for any budding guitarist. 

Dan Erlewine first saw this Tele back in the 1960s, before Mike Bloomfield recorded with it on Bob Dylan’s Highway 61 Revisited album. That was also before Bloomfield and Dylan were booed for going electric at the 1965 Newport Folk Festival. And before Bloomfield recorded the first Paul Butterfield Blues Band album with this guitar. There’s a lot of history in this Telecaster!
Far as commercial recordings go, the oldest recording seems to be by the Hawaiian group Noelani Hawaiian Orchestra in 1933, which did four songs featuring the electric lap steel recorded on Victor records. However, the guitarist is unknown. Bob Dunn recorded electric lap steel in 1935, as part of the country swing group Milton Brown and His Musical Brownies. George Barnes recorded "Sweetheart Land" and "It's a Low-Down Dirty Shame" with Big Bill Broonzy in early 1938, followed a couple weeks later by  Eddie Durham with the Kansas City Five. Barnes played conventional guitar, not lap steel, so that's the first recording of a "conventional" electric guitar performance.
The culture of staying up late and having some drinks any and every night of the week was what I grew up around. But it was also twinned with a kind of mountain vibe because they were young and happy to have gotten away from the farmlands. So they were really into pop music. So the two things kind of came together, this assumption that you played or sang.
I had a single-minded desire for single-ended tone, but I didn’t want to drop insane moolah on a tweed Champ (or any of the tweed Champ clones out there, or even a tweed Champ kit), cool as they may be. Heck, even a Silverface Champ is going to set you back in the $300+ range these days. And it’s a Fender. Dependable? Yup. Great sounding? Sure. But no one is going to see it and say, “What the hell is that?” Which is part of the fun for those of us involved in the weirdoes and freakazoids of the gear world.
In general, the typical situation is that HSH gives me options of cleaner/thinner/clearer tones which aren't as achievable with HH (even with volume and tone pots in use!). These are options I use very frequently, and I'd feel pretty restricted with HH! Though of course, this isn't the case for everyone. Indeed, I'm quite fascinated at the variety of tones Ron Thal and Andy Timmons get from the overly-simple SH set up they prefer!
You've bought most ANY new guitar that sells for less than about 700-bucks.  Seriously.  These days there are LOTS of really decent guitars out there in the $300-$500 price range.  Guitars designed well (and by that I mean ripped-off from Leo Fender), with bodies and necks that have been cut precisely by high-end CNC machines, decent hardware, and again a nice CNC-finish on the frets and good-looking automated paint jobs.  All in all, a guitar that plays well, intonates and stays in tune well, and looks great.  But ... sounds mediocre!  Yep, ALL manufacturers skimp on the pickups today, at least on any guitar less that about  $700-$1000.  Great guitar with midlin pickups?  Yea, fix that!
Acoustic amplifiers are intended for acoustic guitars and other acoustic instruments, especially for the way these instruments are used in relatively quiet genres such as folk and bluegrass. They are similar to keyboard amplifiers, in that they have a relatively flat frequency response with minimal coloration. To produce this relatively "clean" sound, these amplifiers often have powerful amplifiers (providing up to 800 watts RMS), to provide additional "Headroom" and prevent unwanted distortion. Since an 800 watt amplifier built with standard Class AB technology is heavy, some acoustic amplifier manufacturers use lightweight Class D amplifiers, which are also called "switching amplifiers."
Hollowbody guitars feature full hollow bodies much like acoustic guitars do, and are used often in jazz and mellow style music as exemplified by Jazz greats that include Joe Pass, Pat Martino to name a few. It is however not limited to just that as exhibited by Brian Setzer and his Rockabilly style, along with Chet Atkins and his iconic country guitar playing.
Schecter is one of the more recent brands to start building serious trust and authority on the guitar market. They started out as a parts company, only to cross into making their own guitars later on. It is no secret that Schecter guitars are first and foremost built with heavier genres in mind. Almost every model they offer packs so much range, though, that you can easily play anything you want without compromise.
Some steel-string acoustic guitars are fitted with pickups purely as an alternative to using a separate microphone. They may also be fitted with a piezoelectric pickup under the bridge, attached to the bridge mounting plate, or with a low-mass microphone (usually a condenser mic) inside the body of the guitar that converts the vibrations in the body into electronic signals. Combinations of these types of pickups may be used, with an integral mixer/preamp/graphic equalizer. Such instruments are called electric acoustic guitars. They are regarded as acoustic guitars rather than electric guitars, because the pickups do not produce a signal directly from the vibration of the strings, but rather from the vibration of the guitar top or body.
×