Does anyone know anything about Palmer based Magnum Series PGA-65 guitar amps? I live in Costa Rica and bought one new from a music shop but with the amount of moisture here the original box was destroyed along with any manuals, paperwork, etc.. The amp says it is manufactured in China and is solid state. It is supposedly 65 watts with 2 channels, clean and dirty with EQ sections on both channels. It also has send and returns and a spot to plug in your Cd player, etc.. It has a big badge on the front saying Magnum Series, Palmer Guitar Company, Fl Usa. I didn't pay alot for it and for the price it is a decent sounding amp although I probably will replace the speaker with a Celestion.
Late 1938: Scalloped "X" bracing with "rear shifted bracing", where position of the "X" moved further than one inch from soundhole (exact measurement varies, for example: a 1941 D-18 has 1 7/8" distance). So the X-braces were moved about 7/8" further down. And the tone bars were angled more parallel with the length of the guitar and further apart. These late-1938 to late-1944 guitars had deeper scalloped braces than the 1938 and prior forward or advanced braced guitars. This gives the late 1938 to late 1944 Martin guitars improved bass response (don't let anyone tell you that war-time Martins are not as good as pre-1939 Martins!)
The “Studio” model was introduced in 1983, and is still in production. The intended market for this guitar was the studio musician; therefore, the design features of the “Les Paul Studio” were centered on optimal sound output. This model retained only the elements of the Gibson Les Paul that contributed to tone and playability, including the carved maple top and standard mechanical and electronic hardware. However, the Studio design omitted several stock Gibson ornamentations that did not affect sound quality, including the binding on the body and neck. The two notable exceptions to this are the Studio Standard and the Studio Custom. Both models were produced in the mid-1980s, and included body and neck binding, though with dot fingerboard inlays instead of more ornate trapezoids. The first Studios from 83 to 86, except for Studio Standard and Studio Custom, were made with alder bodies rather than mahogany/maple. The current Studios come with a chambered mahogany body with either a maple or mahogany cap. The entry level Les Paul Studio “faded” has a chambered mahogany body and top and a satin finish and is the lowest priced Gibson USA Les Paul.
I moved permanently to Brazil from the USA. I brought an acoustic in a typical acoustic case. I had a vintage VOX v241 Bulldog in it’s original wood case. They both survived the counter check-in and belly load of the airplanes and transfers. My VOX Pathfinder amp was in a footlocker with other thing and made it just fine also. Yes, the plugs and voltage differences are a problem. I need to use a voltage transformer to change the 220v to 110v. I wouldn’t worry too much about shipping a Fender style guitar but any guitar with with a Gibson style neck I would worry about and want the best specialty travel guitar case I could find.
There are a couple of important things to look out for when buying an acoustic guitar for the first time, one of which being plastic hardware – especially if it’s used on the bridge or the tuning pegs. Unless you are paying less than a hundred dollars for the instrument, there’s no reason why a good beginner guitar should have a plastic bridge or saddles, which aren’t particularly durable and do nothing for the instrument’s tone or sustain.
Capacitors used in guitar circuits aren’t polarised, so it doesn’t matter which way round you fit the legs - we normally go with the printed side facing out from the pot. They’re measured in microfarads (uF) and will be marked with a number. You can experiment with different values and materials for different results, but if in doubt, just swap it for what you already have.
A sub-brand under the same umbrella as German brand, Behringer, Bugera has been flying under the radar for some time – though they make some surprisingly clever amplifiers. The BC15 is one such amp. Styled like its predecessors from the ’50s and ’60s, this vintage-inspired amp benefits from a single 12AX7 vacuum tube giving it a lot more warmth and character than for which you’ll pay. And don’t let its size fool you, either – while it only has a single 8″ speaker, it offers up a whopping 30 watts, making for a surprisingly loud little machine. For the price, it’s seriously difficult to do better than this.
Even with the myriad finish options, this latest model looks very much like the original Strats from Fender's original production line. As a testament to how effective the original design is, most of the specs and even the hardware design are followed even to this day. Speaking of specs, the current iteration features the same double cutaway alder body and bolt-on maple neck with a scale length of 25.5", narrower nut-width of 1.685" and SSS (Three Single Coil) pickup configuration. Giving this guitar its authentic quack and chime are three V-Mode Strat Single-coils.
You're headed in the right direction - don't stop! yes, the keyboardist should control vibrato directly with the fingers, not automatically with an LFO. The more you rely on the technology to play the music for you, the worse your results will be in the long run. Is your intention to emulate a guitar, or to achieve a similar kind of lead expression and sound control during playing? Because these two are very different.
Feedback is essentially the presence of a sound loop where the guitar’s amplified sound causes increased vibration in the strings. The sound of this vibration then gets further amplified, continuing the loop and resulting in distorted sound. Usually the source of the feedback is the guitar’s amp, but in cases of hollow-body guitars, the amp’s output resonates in the actual guitar body. For many music styles feedback is an undesirable trait, but it’s also been used as an awesome effect by prominent guitarists such as Jimi Hendrix and Kurt Cobain.
Overstock SaleNew ProductsVacuum TubesSpeakersAccessoriesAmplifier PartsBooks & DVDsCapacitor Amplifier SetsCapacitorsCoversEffect Pedals & PartsEnclosuresFootswitch BoxesGift CertificateGrill Cloth, Tolex & PipingGuitar PartsHardwareJacks & PlugsKeyboard PartsKitsKnobsLuthier ToolsMaintenance ProductsPMT Tone ModsPotentiometersPower AccessoriesRadio & Antique Equipment PartsResistorsReverb TanksSchematicsSemiconductorsSpeakersSwitchesT-shirts/GiftsTech SuppliesTerminal Boards & StripsTransformers & ChokesVacuum Tube AccessoriesVacuum Tube Amplifier SetsVacuum TubesYellow JacketsZero Glide Nuts
Dive bomb is a guitar technique in which the tremolo bar is used to rapidly lower the pitch of a note, creating a sound considered to be similar to a bomb dropping. One of the most recognized pioneers of this technique is Jimi Hendrix. Other notable musicians who are widely known for using this technique are Eddie Van Halen and Joe Satriani. - winner333
Jazz – Does no-one listen to Eddie Lang’s recordings? Or that master of comping, Freddie Green? To Charlie Christian? MarleyIII gets special credit as the only one naming the marvellous Jim Hall, who really should be up there in one of those ten spots. Like Marley, I really like the work of John Abercrombie, although I can’t put hand on heart and suggest him for the top ten. If you like John A, let me put in a plug for the work of London session-man John Parricelli. (Which reminds me that the very different “Johnny A” is no slouch either!)
I love them both, have a Strat and Les Paul. they are such different animals. Each has it’s place in my music, each has a special sound. Used to own a Tele which I just didn’t enjoy playing so much, so traded in for the Les Paul. I later bought a modified Tele with humbuckers (I know it’s a sin) but damn it sounds so good, for heavy power chords, more like a PRS sound. I’ve been playing 27 years now and am a composer / songwriter. Played in lots of bands, and during my live work I have to say I prefer my Strat. It’s lighter than the Gibson, and contours nicely to my body. With a good valve amp and the right strings I can get some lovely fat sounds out of it. I use the Gibson mostly in the studio. When I moved countries, I needed a cheap electric to tide me over until my stuff got sent over. I picked up a $100 Mitchel (Made in China). The setup was awful, totally unplayable, so set it up properly, and to be honest it plays like a dream. The neck is amazing for a $100 guitar, and with some new pickups the sound is great too. The upshot here is that it doesn’t really matter what guitar you use to make music on, as long as you enjoy the instrument, a cheap guitar can go a long way. I find the discussions about which is better kind of like guys comparing their crown jewels, it’s purely academic and what matters is how you use the thing 😉
Guitar effects pedals offer a huge range of possibilities for guitar-sound manipulation―there are literally hundreds of pedals from scores of manufacturers. If you or someone you know is not completely satisfied with the clean, unprocessed sound coming from their guitar and they want to experiment with and modify or color that sound, a great way to tweak it is with effects pedals, also called “stompboxes.” An effects pedal, depending upon its configuration, modifies the sound of a guitar through electrical circuitry or digital modeling via computer chips, either giving it subtle color or dramatic shift. All pedals include knobs on the enclosures that allow the player to adjust the intensity, speed, depth, and shape of the effect in increments, from nuanced color to ear-splitting crunch.
Some studios are too small for regular amp miking, and even if they're not there are sometimes occasions on which you need better separation from the other instruments playing at the same time. A neat way around this is to use a soundproof box containing a guitar speaker and a microphone. Various commercial models are available where your guitar amp output feeds the speaker inside the box and the microphone feed comes out to the mixer in the normal way. The designer's challenge is to make this work without the resulting cabinet being too large or too boxy sounding. The DIY alternative to this is to place the combo or speaker cabinet in an adjoining room, or maybe even a cupboard or wardrobe (along with the mic, of course!).
This acoustic-electric parlor style guitar features a solid cedar top and solid sapele back and sides, premium appointments that other builders will require you to pay top dollars for. And it features old school parlor style body shape, which gives the instrument a vintage appeal, and blues box style tone with emphasis on the middle frequencies. This makes it ideal for blues, folk and old school comping, a good contrast to regular sized acoustics in a mix.
Even now i make people custom guitars and have made a few for people in MO/IL a total of 23 made and they all love them and say they are the best guitars theyve played cause i work side by side to shape the guitars necks and bodys to fit most comfortably with them but i charge $2500-3000 for a guitar which is still cheaper than the big name guitar places
Take a guitar playing friend with you, decide on a price range and try out all the guitars you can afford. Then go to another shop and do the same. Include used instruments too, and don't worry too much about the appearance. The important thing is how it sounds and how well it plays. A guitar with a nice low action which sounds reasonably good will help a great deal toward helping you stick with it. A guitar with a high action that sounds horrible will make you give up before your fingertips have time to harden!
The following chart will help you choose the right sized guitar for your child. It is important to note that guitar size is only one part of making it easy for your child to play. An un-adjusted guitar will not be easy to play, even if it is the right size. Here at FirstGuitar.com, each guitar is inspected, properly adjusted and set up so that the strings are easy to press down and the notes ring clearly.
The actual key that this song was written in is Bb (B flat) and can be a bit difficult for beginners; I prefer using a capo for this song and playing it in the Key of C. Using the capo to play this song doesn’t change how the song sounds, but it makes playing the song a lot easier. Using your capo on the third fret, you chord progression will look like C – G – Am (A minor) – F.
The solution is pretty simple actually. When setting your intonation it should look like two sets of steps. You should never need to move the saddles all the way forward or turn them around. If you want to adjust something do it in a way that allows you to keep this configuration. You do that and you'll never have to worry about tuning issues period, let alone a g-string.
Our Most Recommended electric guitar is Yamaha Pacifica Series PAC012 Electric Guitar. Yamaha has been a power player in the music industry for many decades. The Pacific Yamaha Series is one of the best series for the last decade for its high quality tone and amazing play experience. The Yamaha Pacifica Series was designed for the focus of one thing: Yamaha’s customers.
Once the electric guitar had been firmly established by the 1960s and 1970s, guitar designs became increasingly distinctive and reflective of popular music trends. And by the 1980s guitarists were more and more concerned with the look as well as sound of their instruments, regarding their guitars as identifying signatures. Eddie Van Halen decorated his guitar with colored sticky tape, and Prince has had guitars of all shapes and colors custom-created for his stage performances.
As a side note, many guitarists refer to the vibrato as “tremolo” or, worse yet, “whammy bar”. (I sometimes do, too, when my mouth is moving unaccompanied by my brain) Vibrato refers to varying the pitch while tremolo is varying the volume. Leo Fender himself is largely responsible for the misuse of the words. He called the bar on his guitars the “tremolo” and even had the tremolo effect on his amplifiers labeled as “Vibrato”.
Over the years, authentic 1950s Les Pauls have become some of the most desirable and expensive electric guitars in the world. Only 1700 were made between 1958 and 1960. Today, a 1959 Les Paul Standard in good condition can be easily priced between $US200,000 and $US750,000, making it the most valuable production model electric guitar ever built (however, Gibson Custom Shop reissue versions of the 1950s and 1960 Les Paul can be purchased for less, between $US3,000-$US6,000 – certain artist signature model versions of the guitars are considerably more expensive). Jimmy Page has been offered 1 million pounds (1.6 million USD) for his “number 1” 1959 Les Paul should he ever decide to sell it.
That said, information regarding Asian-guitar production from the 1970s and early 1980s is cloudy at best. Most lower-end Lotus-branded guitars were produced by either Samick or other factories in Korea or Indonesia. However, some of the higher-end Lotus instruments were built by the Cort factory in Korea or by one of three factories in Japan: Yamaki, Matsumoku, and Moridaira.
Never buy a guitar for its looks alone. You must buy a guitar only once you have started learning and know your fingerstyle and the genre of songs you will be playing. Most of the guitars last for more than a decade. This is the reason, you must keep all these tips in mind before buying a guitar. Look for the style of your playing before you buy a guitar. A few guitars have a thicker neck which may or may not be comfortable to you. In each brand of guitars, different layouts and designs are available. Look for the series and the design that provide you comfort while playing the guitar.
The neck is also made of mahogany and is hand set into the body. Looking at the fretboard, we see a standard rosewood design with white binding and classic trapezoid inlays. Epiphone went with a set of Alnico Classic humbucker pickups. These are very close to what the original Gibson solution had to offer. Classic rock and blues just flow out of these, although you are more than free to crank up the gain and blast some heavy riffs.
Another exotic tonewood is making a name for itself in the guitar industry. It’s similar in appearance and sound performance as Mahogany. It has a distinctive punch for the mid-range tones, but it emphasizes the bright trebles that can be an asset in music when you achieve pitch-perfect intonation. The Martin Road Series DRS1 Guitar sports Sapele beauty perfectly!
• Sound Judgment: Consider the sonic characteristics of the various materials used in making electric strings. Stainless steel strings are the least glamorous, but offer plenty of bright bite and sustain. Pure nickel has a warm old-school sound, for vintage tones. And nickel-plated steel is a bit brighter than classic nickel and responds more adroitly to picking attack. Chrome guitar strings are typically the province of jazz players or blues artists who are looking for the kind of warm retro tones chiseled into history by the likes of Charlie Christian or swinging Gibson ES-250, ES-5 and ES-335 bluesman Aaron “T-Bone” Walker. And then there are coated strings – the most expensive and theoretically the longest lasting. They are, however, not really the best, sonically speaking. Coated strings tend to have less sustain. Also, their Teflon exterior surfaces are slippery, which might take some getting used to for particularly aggressive electric guitar players. And when the coatings wear off, they rust like any other string.
Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.
A common theme with these models is the capability to easily access the highest notes of the instrument, alongside dual humbuckers and massive sustaining bodies. The Explorer, much like the V, is now a very common electric guitar shape in the heavy rock and metal genres, but was widely used in other styles as well. This is evidenced by one of the most famous Gibson Explorer players, Allen Collins of Lynyrd Skynyrd.
The electric guitar was born out of necessity. Going back to the big band era, acoustic guitar players needed an instrument that could be heard over all the brass and woodwind instruments. They also need to be heard over the banjos and mandolins on the front porch. In the 1930s, companies such as Rickenbacker and Gibson started to add guitar pickups to their instruments, which allowed musicians to plug them into an amplifier for added volume. Rickenbacker added a pickup to their Hawaiian guitar (also known as a lap steel guitar) “Frying Pan” model, and similarly, Gibson added a pickup to their electric Hawaiian EH-150 model. Soon after that, Gibson introduced the iconic ES-150, which gave players the very best of both worlds. It gave guitarists a world-class Gibson hollow body guitar with a built-in pickup, which made it the perfect fit for guitarists who played large ensembles. In 1951, Fender revolutionized the electric guitar market even further by unveiling the first ever mass-produced solid body electric guitar, now known as the Telecaster, which was introduced in order to combat the feedback that hollow body electric guitars produced. Then in 1952, Gibson worked closely with one of the most widely respected guitarists of the era to create the first Gibson solid body electric guitar, now known as the Les Paul and named after its co-inventor.