Electric guitars are powered by electromagnetism—and electromagnetic induction to be precise. That might not sound familiar, but you've probably used it if you've ever ridden a bicycle at night with a dynamo-powered light. A dynamo is a simple electricity generator with two basic parts: a rotating coil of wire that spins around inside a hollow, curved magnet. As the coil spins, it cuts through the magnet's field. This makes electricity flow through the coil. Two electrical connections from the coil are wired up to a lamp and the electricity generated makes the lamp light up.
Although the G&L Legacy electric guitar was released one year after the passing of Leo Fender, it is designed to the specifications of the original Stratocaster but with a few modern features specific to G&L instruments. The Legacy included, for instance, G&L's Dual Fulcrum vibrato and Schaller tuners and was available in a combination of different tonewoods. Even if the G&L guitars from before Leo Fender's death are more collectable, the Legacy electric guitar is still considered a high-quality instrument.
A pedal itself can have an effects loop, but the most commonly used place is on the amplifier itself. You'll see on most amps (but not all) some form of output labeled as Effects Send or Preamp Out accompanied by an input labeled Effects Return or Power Amp In, respectively. Both sets of outputs and inputs refer to the effects loop that you can add between the preamplifier and the power amp section of your amplifier.
The hollow body — the original electric guitar design — is completely hollow on the inside, like an acoustic guitar. Hollow-bodied guitars like the Gibson ES-150 saw use in jazz ensembles by players such as Eddie Durham and Charlie Christian, but were also adopted for country, folk and, eventually, rock and roll. If you’re looking for warm, mellow tones, the hollow body is your best bet. That isn’t to say it can’t give you some sweet, raunchy distortion. A proper hollow-body setup can pull off a great classic blues or rock sound, but they are more prone to feedback than solid body guitars.
Why We Liked It - Unless you’re looking for an electric guitar to play genres like heavy metal, chances are you would love this guitar. It just makes us happy and it’s hard to put it down. Fender is a good brand and they offer guitars of very high build quality. It’s available in green, blue and red, so you can really get a guitar that matches your personality and music.

Note: The concept is buried in first understanding the other meanings of the word custom. Although “made-to-order” is a correct characterization where you can personalized the headtsock with your first or last name or initials and you can CUSTOMIZE YOUR GUITAR: Mahogany, Alder, Maple, Bass Wood, Right/Left handed guitar, Body colour, Neck profile, No dots on fretboard and Fret size. Our Custom Shop Guitars referred to in this site as drawing "inspiration" from the major guitar brands and any reference to custom shop brand names or "Inspired by" are made strictly for comparison purposes only.

Two ways. The most important is: practice. But the other way is technique. Proper fingering. Some chords have multiple ways they can be fingered, and you always want to pick the easiest. Now, some fingerings may not *seem* the easiest, just because they aren't the ones you already know, but in the long run, they are worth learning because they really do make things easier. In particular, most people play an open A chord the wrong way, but the proper fingering makes it easier.. The essense of fingering is laziness: you want to move your hand and fingers as little as possible. So in particular, if you have a finger down in one chord that's already in the right place for the next chord, you want to just *leave* it there. Don't pick it up, only to place it back down in the same place. And if you can use a fingering that *let's* you just leave it there, then that's clearly the choice!. So let's look at the open A chord. Most people play it with their 1st finger on the 4th string, 2nd finger on the 3rd string, and 3rd finger on the 2nd string, three-in-a-row. But that's a weak fingering (however popular it is). The better fingering is like this: 1st finger on the *3rd* string, 2nd finger on the 4th string, 3rd finger on the 2nd string. It may *look* a little awkward, and feel awkward until you learn it. But it really is the better fingering.. Why? Because consider the context of an A chord. What chords are you most likely to want to go to from an A? The biggest answer would probably be D. Well, notice, if you finger the A chord as I recommend, your first finger is now already in the right place for the D chord, and can just be left there! You only have to move two fingers, instead of all three, to switch between the two. This lets you do it faster and smoother. The other chord you'd be likely to want to go to from an A would be an E, and, while we don't have any fingers exactly in the right place, we at least already have the 1st finger on the 3rd string, like we want it for an E; we just have to slide it back one fret. This is still easier than entirely re-arranging all three fingers. Finally, more rarely, you might want to go between A and Amaj7. For instance, the old Beatles song "Mother Nature's Son" uses the sequence A Amaj7 A7. This is perfect for this fingering! You just slide your first finger back one fret to make the Amaj7, then take it off entirely to do the A7.. Similarly, a G chord normally be fingered using your 2nd, 3rd, and 4th fingers, instead of your 1st, 2nd, and 3rd. This makes it much easier to go to C, the most likely chord for you to be going to.. But no fingering rule is absolute, it's always contextual. If you have a song which requires you to move to something more unusual, and a different fingering would make that particular move easier, then use the different fingering. For instance, if I had something which required that I add an A note to the top of my G chord, then I might well use the common 1-2-3 fingering for the G chord, so that I'd leave my pinkie free to reach the A note.
The Ibanez Gio GRGM21 Mikro in Black Night proves that guitars don’t have to be super expensive to sound great. This is a fantastic cheap electric guitar that doesn’t suck, often picked up by beginner guitarists who are into metal and hard rock and those who like a shorter scale guitar. Featuring an iconic shape, a specially designed GRG neck made of maple, rosewood fretboard and 2 x Infinity R humbucker pickups that can be used separately or in unison via the 3-way pickup selector, you have a comfortable and great sounding powerhouse of a guitar at your disposal. It’s one of our favourite cheap electric guitars that sounds amazing when you throw some distortion at it! Available in different finishes here.
The first step is to determine what’s in your pickup already. The most common magnets for humbuckers are (roughly in order of strength): alnico 2, alnico 4, alnico 5, and then various types of ceramic magnets. In simple terms, the stronger the magnet, the greater the potential output. But you can’t just look at magnetic strength alone, because stronger magnets also affect the string’s ability to sustain.
Vox's history goes back to the late '40s, where they originally built electronic keyboards. Their presence in the guitar market started in the late '50s when they launched the 15-Watt AC15 amplifier which ultimately caught the attention of many iconic artists - including The Beatles, Queen, Dire Straits, The Yardbirds, The Rolling Stones, The Kinks and many more. These artists helped spread the brand's popularity around the world, but ironically, they were not enough to make the company profitable. This resulted in the Vox brand being owned by many different companies, thankfully Korg took over in 1990 and continues to take good care of the brand up to this day. These days, Vox is still the go-to amp for chimey and jangly clean tones with an extensive line up of amplifiers, interestingly, their line up still includes modern reproductions of their popular AC15 and AC30 combos.
One special effect I used quite a lot in analogue studios, but which is surprisingly tricky to implement in a lot of software sequencers, is where you feed the left and right outputs of an auto-pan effect to two different effects processors. With this setup, the outputs of the two effects can then be mixed together to create a variety of different modulation-style treatments. This patch always worked well in a send-return loop with a pair of phasers, especially if you also EQ'd the two returns wildly differently. The same setup used as an insert could do great things with distortion and ring-modulation processors, and if you were feeling really adventurous, you could fiddle with the panning rate in real time while mixing down. Mike Senior
Read Full Review If you’re looking for a lightweight guitar aside from a Stratocaster. You prefer the quality of tone produced using humbuckers than a single-coil can deliver. This SG model from Epiphone meets that requirements on the overall sound, playabilty and price that fits the under two hundred dollar budget of a beginner. As well as for seasoned players looking at the market for an affordable studio or back-up guitar to bring on stage.

This is where you want to go! Steve is kind, professional, and supremely competent. just brought my Taylor 614ce for a neck adjustment and electronics work. Steve told me that he was running with about a two to three week turnaround period but then did a couple of quick fixes -on the spot- that made my guitar really sing for my next gig. I'll bring it back to him for some more in- depth repair soon but for now I am a very happy camper. And he didn't even charge me a dime!! I will be visiting Steve for all my guitar and mandolin service needs in the future.

Ken Rosser picked the Spider Classic 15 as his favorite of the amps we tested, saying, “I think the effects on the Line 6 sounded the best. It gives you a nice range of tone options. The clean tones stay clean even at loud volume, which a lot of these can’t do. One caveat is that, when you switch the amp sound, it changes the way all the knobs work, so the sounds can really jump out at you.” Fred Sokolow liked the Line 6 in general, saying, “I could pretty much figure out what to do with it, but I could figure out the Fender more easily.”
Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  250K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.  Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Shape Shifter - String Instrument Finish: High Gloss Natural
Takamine GS330S: Like Yamaha, Takamine is a Japanese guitar company. They also have low price Jasmine series for beginners. I don’t recommend you buy Jasmine series if you have enough budgets because Jasmine has a laminate top. Go for the GS330s, it has a solid Cedar top, cedar is a kind wood that make better sound when aged. So if you buy Takamine GS330S and keep it for a long time, the guitar will sound better and better. For more details features and price, check out here.
Bassists pairing an amplifier "head" of a certain wattage and a speaker cabinet (or speaker cabinets) with a certain wattage power-handling capacity may require advice from music store amplifier expert or an audio engineer. One of the reasons that many beginning bassists choose combo amps when they are starting is because with a combo amp, the manufacturer has ensured that the speaker and power amp are compatible from a power handling and impedance perspective. While there is a widespread belief that an amplifier with a rated wattage that is higher than the rated wattage on a speaker cabinet will harm the speaker, in fact, a clean, un-clipped power amplifier signal can be above the rated wattage of a speaker without damaging the speaker, as long as the power amp is sending out a clean, unclipped signal. There is a much higher risk of damaging a speaker when a clipped (unintentionally distorted) power amplifier signal is sent through it, even if the wattage is far below the rated wattage of a speaker. For example, a bassist could use a 700 watt power amp which is running with zero power amp clipping through a speaker cabinet rated at 500 watts without damaging the speaker; however, if a 100 watt power amp that is heavily clipping is plugged into the speaker cab, this could blow the speaker.
This should give you an idea of when the majority of the production for any one model occured (majority meaning more than 5 instruments per year). Note this does not mean a model can not exist outside of these years - it certainly can. Just these are the years recorded by Martin in their ledgers. Note this list (for the most part) does not go past 1969.
This list kind of blows. There are no greatest guitarists. And I hate how people think guitar is sickly limited to rock guys who in the whole scheme of things are pretty amateur. How about Eric clapton? Heck if Charlie Christian or django rhinehardt had never started playing solos guitar would still be a strict rhythm instrument playing crotchets to emphasise the beat. He had 2 fingers and did more for the guitar than anyone on this list? Especially Tom Morello? How about pat methany, wes Montgomery, pat martino, tal farlow, JOHN MCLAUGHLIN, george benson? Listen to any of those guys and it will completely redefine your thoughts on the guitar. It can so easily be intelligent and soulful simultaneously…

Dick Dale is a prominent Stratocaster player, who also collaborated with Leo Fender in developing the Fender Showman amplifier. In the early 1960s, the instrument was also championed by Hank Marvin–guitarist for the Shadows, a band that originally backed Cliff Richard and then produced instrumentals of its own. So distinctive was Hank Marvin’s sound that many musicians, including the Beatles, initially deliberately avoided the Stratocaster.[citation needed] However, in 1965, George Harrison and John Lennon acquired Stratocasters and used them for Help!, Rubber Soul and later recording sessions; the double unison guitar solo on “Nowhere Man” is played by Harrison and Lennon on their new Stratocasters.[10][11][12][13]
The same kind of automatic difficulty adjustment works in Rocksmith's Lessons feature, which is just what it sounds like: a set of tutorials to teach players everything from how to hold the guitar and basic picking techniques, to how to bend, slide, and hammer on notes. Get them right and you'll advance to ever more challenging material. Struggle, and the oh-so-polite instructor tells you he's just going to slow that riff down a little and give you another crack at it. Herein lies Rocksmith's greatest strength as a teaching tool—it gives you the ability to learn at your own pace without fear of judgment.
: This vintage YAMAHA is one of the greats folks and here for your serious consideration today at Joe's Vintage Guitars.... This is the Classic Vintage Yamaha FG-200 - Nippon Gakki body seems the same specs as the famous FG180...hummm? interesting She's been lovingly played for nearly 40 years,its beautifully aged now with a great feel & patina only found on real vintage guitars of this age and caliber. This guitar really has nicely opened up over the past 40 years and you just don't get booming bassy tone like this one with a new guitar thats for sure. This example is not mint but is beautiful in its own right, it does have a few nicks, dings and wear but nothing really bad at all really she just looks the part of the 40 year old Martin D28 vintage guitsr. A lot of guitar for not a lot of cash... Vintage aint goin down..get her at a great price today! Let me know...thanks for your interest, Joe email me: gr8bids@comcast.net This is an early one from the Nippon Gakki plant and has a surprising boom even for or a 200 same as our great old red lable FG180 for that matter with no real decernable diference. I cannot find a serial number but is believed to be late 60's - early 70's This old girl has Excellent low end sound!!! and tone on this guitar is wonderful - it really booms! Condition: Average vintage wear wich includes minor pick wear, scratches dents & dings for an old vintageguitar. but no cracks to be found, straight neck, trussrod is functioning properly, very good frets still playing well all the way up & down the fingerboard with no funny buzzes or dead spots... Frets 1 - 5 ( cowboy cord area )have medium play wear but still plenty of life remaining no problemo. action is very good at 3/32 1st E string @ 12th fret. Tuners are the original and in excellent working order. Bridge plate is securely fastened to top. We have just as a precationary installed A PlateMate brass plate has now been installed to any prevent further wear to bridge plate which is common among these vintage guitars. This brass plate has also contributed to its big booming tone now is even a more rich sounding competitor to a vintage Martin D-28... FRESH SET UP...with Martin Bone & Saddle... this guitar is a wonderfull fun guitar to play lots of bang for the buck factor here.. This guitar is overall a very solid well built guitar that is standing the test of time it also is a great sounding vintage guitar that plays very nicely. Ya can't go wrong with this wonderful vintage Yamaha FG Nippon Gakki guitar Has a new bone saddle and Martin Silk Steel strings. No case included but will protect and properly package for shipping. PlateMate product works very well and is easily removed if desired. To my ear it enhanced this boom-box's sound quality and is described by the manufacturer as follows: If you want to protect and enhance the sound and tones and balance out string volume of your acoustic guitar, Mitchels Plate Mate is the way to go. Mitchels Plate Mate is a small piece of brass that is applied without using or altering of tools, and is installed as fast as you can change a set of strings. This was invented and patend mainly to prevent damage caused by ball-end strings on the acoustic guitars bridge plate, it is also proven to enhance volume, tones, and balances out string volume by one of the best acoustic guitar makers in the world. Mitchels Plate Mate will protect your guitar from ball-end strings pulling up threw the bridge plate and possibly cracking the bridge or pulling the bridge off the top of your guitar which would be a very expensive repair bill. It also protects your bridge pins, and saddle by making the string windings stay down in the string holes where they belong. I have used Mitchels Plate Mate in guitars priced from $100 to $50,000 it doesnt matter the price just protect your prized posetion or investment. .
The modern era of Ibanez guitars began in 1957 [3] and the late 1950s and 1960s Ibanez catalogues [1] show guitars with some wild looking designs [2]. Japanese guitar makers in the 1960s were mostly copying European guitar designs and some of the late 1960s Ibanez designs were similar to Hagström and Eko guitar designs. Hoshino Gakki used the Teisco and FujiGen Gakki guitar factories to manufacture Ibanez guitars after they stopped manufacturing their own guitars in 1966 and after the Teisco guitar factory closed down in 1969/1970 Hoshino Gakki used the FujiGen Gakki guitar factory to make most Ibanez guitars.
One unique application of a fuzz pedal involves starving the pedal of voltage--which will produce a scratchy, velcro-like tone. This is desirable by some musicians because it is a highly unique sound and is often employed by more avant garde musicians. This sound can be achieved by purchasing a power supply with a sag output, or using a nearly dead battery, although the pedal won't last long when using that method.
Amazingly well made and a beautiful guitar. The finish is incredible, it looks like a guitar that should cost a $1000 and up. Mine is the red color and found it in a pawn shop looking very rough, price on it was $99 and at first I thought it looked like a $99 guitar so I didn't pay any attention to it. I was looking a some Epi SG400s and a couple of Gibson's but for some reason I went back to the Samick. I had some cleaner with me and I grabbed a rag and started cleaning it up, after a few minutes of scrubbing this beautiful guitar appeared. I plugged it in along with the Epis and Gibson SGs and played them side-by-side and I was amazed at the sound I was getting from the Samick. I compared it along with the other SGs and the finish and the build quality smoked the others. I am all about American made guitars but this Korean made SG has completely changed my opinion about Asian made guitars, especially when I compared it to a $900 Gibson. I wasn't even looking for a new guitar but I couldn't let this one get away. I bought it and have played it for hours every day for the last week. It's amazing, the neck is the smoothest and easiest to play that I've ever seen, I like it much more than my Ibanez RG with the Wizard II neck I've got. I am now looking out for other Samick Artists Series guitars and if you see one for a good price try it out.

Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.

In 1950, Leo Fender introduced the single-pickup Esquire, and a few months later released a dual-pickup version called the Broadcaster that, due to trademark issues, was later renamed the Telecaster. The Tele® would go on to become the world's first successfully mass-produced solidbody electric guitar. Simple yet elegant, it has been a show-stopper and session magnet since its debut. It’s the go-to guitar for twangy chicken pickin’ solos, which is why the iconic axe has appeared on the majority of country records over the past six-plus decades.
Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.
In 1959, the Special was given the same new double-cutaway body shape as the Junior and the TV received in 1958. However, when the new design was applied to the two-pickup Special, the cavity for the neck pickup overlapped the neck-to-body joint. This weakened the joint to the point that the neck could break after only moderate handling. The problem was soon resolved when Gibson designers moved the neck pickup farther down the body, producing a stronger joint and eliminating the breakage problem.
{"id": "113503875", "categoryId":"site5AAG", "name":"Vintage Palmer Electric Solid Body Electric Guitar", "pageUrl":"/Used/Palmer/Vintage-Palmer-Electric-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/NonExistingImage-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"", "priceMin":"", "priceMax":"", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Palmer", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "1", "outletonly": "", "checksum":"", "priceVisibility": "", "itemType": "Vintage"}
At least five sunburst hollowbodies were offered in ’61, the PE-7, PE-8, PE-13, PE-14 and PE-51. These appear to have glued-in necks, by the way, with the open-book head, circular sticker logo and rectangular metal-covered pickups. The PE-7 was a non-cutaway thinline with dots, a single neck pickup, elevated pickguard, a fancy lyre trapeze tailpiece and volume and tone controls mounted on the lower bout. ’60s Bizarre Guitars shows a ca. ’61 PE-8 with a single black-plastic-covered pickup with Teisco printed on the top, small strip inlays, wooden pickguard, a fancy harp tailpiece and volume and tone mounted on the lower bout. The following year this model would have two pickups, so whether this is typical or not is unknown. The PE-13 and PE-14 were single-rounded-cutaway archtops, the difference being in finish, the former being blonde and the latter sunburst. Both these were full-bodied jazz guitars, with the small block inlays, twin pickups, chicken beak selectors, elevated ‘guards and two volumes and two tones mounted on the lower bout. Some of these carried fancy Gibson Johnny Smith trapeze tails. The PE-51 was a twin pickup, single-rounded-cutaway thinline archtop, with a chicken beak selector, ordinary trapeze tail and one volume and tone on the lower bout.
Ovation backed off from its more exotic design directions and in ’77 introduced two more conservative models, the Preacher and the Viper, and its first solidbody basses, the Magnum I and II. The Preacher featured two equal cutaways, whereas the Viper sported more of a Les-Paul-style single cutaway, though neither would never be confused with a Gibson equivalent. Their shape was, in fact, essentially a downsized version of the Ovation acoustic outline. The Magnum shape was derived from the earlier Breadwinner and Deacon, with more contouring.
If you haven't tried a higher end Yairi then you have missed it. These are great hand crafted guitars with a very good neck and great sound. They are branded Alverez in the US but be sure it is one of the Yairi made. There are not lots of them made due the the complete hand crafted design. You don't find them in the music stores much but they should be there. I have owned one for many years and have yet to pick up any other guitar that can match it in my opinion

{ "thumbImageID": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin/K36144000001000", "defaultDisplayName": "Warwick German Pro Series Corvette $$ 4-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Satin", "sku": "sku:site51500000072278", "price": "1,949.99", "regularPrice": "1,949.99", "msrpPrice": "2,549.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin-1500000072278.gc", "skuImageId": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin/K36144000001000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin/K36144000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Burgundy Red", "sku": "sku:site51500000138040", "price": "1,899.95", "regularPrice": "1,899.95", "msrpPrice": "2,649.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Burgundy-Red-1500000138040.gc", "skuImageId": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Burgundy-Red/K36144000002000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Burgundy-Red/K36144000002000-00-60x60.jpg", "imgAlt": "" } ] }
I am leaning toward Justin and keep watching Marty I jumped way ahead into intervals and in the middle of the presentation it clicked. He knows his stuff. As a newcomer I want to see a bit of the whole picture as I learn basics. PS senior .Found this review very good of top sites and subscribers. AndyGuitar claims on Amazon to be the number one you tube guitar teacher. Not college educated like Justin, J Kehew or Marty Swartz . I will check these others out. Thanks for the review. I would have missed some. So many flooding You Tube
So don't hesitate; your next multi effects pedals, rack-mounted units and accessories are probably waiting just a few clicks away. The only thing better than a board full of great pedals is one box that combines all those great pedals into a single convenient package - and once you've got that multi effects unit onstage with you, the possibilities are virtually endless for the personalized tones and unique sounds you'll be able to bring to every performance.
Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches. 

Ibanez, a guitar and bass manufacturer, came to prominence as a result of music legends like Steve Vai and Joe Satriani using this brand. These guitars provide an exceptionally uniform neck action, a highly versatile tone, and top of the range pick up configuration. One of the main reasons that this brand gained popularity was the effective tone from cheap and mass-produced instruments. Heavy music is what they excel in, and metal enthusiasts have been loving Ibanez for decades now. They manufacture guitars for every style and genre. The most iconic model is the RG, but S series is also loved by all. They are also the makers of the 7-string guitar, with the first model Universe being made in the year 1990.

: I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.
While I’m on the subject of guitar myths... Many sellers of vintage Japanese guitars have been throwing around the term “lawsuit guitar”, although not usually in reference to Kents. In 1977 the Norlin Company, which owned Gibson at the time, sued Elger Guitars, which was the U.S. distributing arm of Hoshino Gakki of Japan. The suit claimed that Hoshino-made Ibanez guitars too-closely copied the headstock design of Gibson. Just the headstock. By the time the suit was brought out, Hoshino had already changed to a headstock more closely resembling what was on Guild guitars of the time. So it was pretty easy for Elger Guitars/Hoshino to promise not to copy the Gibson headstock anymore.
Ihave a 12 string dorado. I found a guitar that was sold for $299. It's a 12 string acoustic, Gretsch, 1971. Seems like the right period. The problem is that it is called doraldo. One letter out. Rosewood fret board, dot inlays. Exactly the same as mine but different name. Maybe it could be the same? Go to http://www.rabbithillmusic.9cy.com/id2.htm

I agree with Squank, and I appreciate the compliment! We live in a golden age of guitar gear and I’m in the lucky position of getting to play through quite a bit of it. It’s rare that I come across an amp, pedal, or other piece of guitar hardware I truly dislike, and I can usually get a decent, useable tone out of most modern equipment. This month, I’ll share some of my thoughts on dialing in great tone on amps, pedals, and guitars.

After steel strings were the norm, rectangle bridges were still used on the lower end Martin models and smaller body models. Bridges don't last forever unfortunately, and the rectangle models are easy to reproduce. Hence here's some specs that may help you determine if a rectangle bridge is original. A Martin rectangle bridge should be 6" long and 1" (or slightly less) wide. The top of the bridge should have close to a 16" radius lengthwise. The tallest point of the bridge should be between the A & D strings, and the lowest at the high E string. The wing thickness is about .095".
At one point, Fender switched to producing guitars with the bridge pickup located farthest from the highest-amplitude portion of the vibrating strings, slightly “over-wound”, thus increasing the signal output from that pickup. Even more overwound pickups (“hot-wired” designs) became popular, either for all three pickups (a “hot” configuration), or for the bridge position only (so-called “Texas Hot” due to its popularity among Southern Rock guitarists).
Next important control knob is usually labeled as time or rate. This defines the length of echoes in a reverb. You can have them short or you can have them last for a fairly long time. Which side you will lean more towards is going to depend on the nature and tempo of your music. Slower, more subtle riffs can easily deal with long reverb times while faster sections usually work best with short reverb. Again, experimentation is the key here.
Launch price: $1,499 / £1,211 | Type: Amp modeller/multi-effects pedal | Effects: 70 | Amp models: 41 guitar, 7 bass | Connections: Standard guitar input, standard aux input, XLR mic input, standard main outputs (L/mono, R), XLR main outputs (L/mono, R), standard stereo phones output, 4x standard send, 4x standard return, s/pdif digital in, s/pdif digital out, AES/EBU and L6 Link out, Variax, MIDI in, MIDI out/thru, USB, 2x expression pedal, Ext amp, CV | Power requirements: Mains power (IEC lead)
Just plug your guitar into the sound card input, start Guitar FX BOX and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice and other inputs. This sound processing program is acting just like a good collection of guitar effects pedals. You can use several of them at the same time, even all if you need so.
A wah-wah pedal is a moving bandpass filter whose frequency center is controlled by the musician via a rocker pedal. This filter boosts the frequencies in the instrument signal around the moving frequency center, allowing the musician to emphasize different areas of the frequency spectrum while playing. Rocked to the bass end of the spectrum, a wah-wah pedal makes a guitar signal sound hollow, without upper harmonics. On the other end of the sweep, the filter emphasizes higher-end harmonics and omits some of the low-end "growl" of the natural instrument sound. Rocking the pedal while holding a note creates a sound that goes from growl to shriek, and sounds like a crying baby, which is how the effect got its name and also the reason behind the Crybaby line of wah-wah pedals. The wah-wah pedal, used with guitar, is most associated with 1960s psychedelic rock and 1970s funk. During this period wah-wah pedals often incorporated a fuzzbox to process the sound before the wah-wah circuit, the combination producing a dramatic effect known as fuzz-wah.
You don’t have a single Guild in your list, but you have Washburns that totally lack any sort of bass response. In fact, I’ve never understood how Washburn could take perfectly good materials like sitka spruce and mahogany, and produce such inferior guitars. You list the Fender fa-100 and stratacoustic, both firewood as far as I’m concerned, but don’t list the outstanding Alvarez AD60 and AD70, two amazing sounding guitars for the money. The Hohner and Oscar Schmidt OG2 are beginner guitars, but I know a lot of people with Yamaha FG800 and FG830 guitars who would be very offended by you saying one of their favorite guitars is for beginners. They are serious instruments, even if they only carry a sub-$300 price tag. They are certainly better sounding than that Taylor Big Baby thing, which I was shocked to hear at GC. Talk about over-rated. But you did get many things right. You gave the Blueridge d160 high marks, though I think the D140 should have been up there, too. Good to see that you gave the FG800 such high marks, but I actually like the FS800 a little better. It’s easier to play and better for fingerpicking. The Ami, Jim Dandy, and Recording King are all over-rated and over-priced. You need to take the Washburns down and put up the Guild M-120, D-120, and D-150. The D-150 may be the best guitar you can buy for under a grand.
That said, unless the beginner had a specific focus, I never have a problem recommending Line6 spider amps. Lots of options built right in (so you save a fortune on effects you may want to experiment with), and they don’t sound bad at all. I played one a few years back in a rock band and got compliments on my sound all the time, and I put nothing else in the signal path, I played straight in using one of their floor controllers at a gig. I think the whole setup (and this was the 120 watt one) cost me something like $350 bucks.
Fuzz bass effects are sometimes created for bass by using fuzzbox effects designed for electric guitars. Fuzzboxes boost and clip the signal sufficiently to turn a standard sine wave input into what is effectively a square wave output, giving a much more distorted and synthetic sound than a standard distortion or overdrive. Paul McCartney of The Beatles used fuzz bass on "Think for Yourself" in the 1966 album "Rubber Soul"
Locking vibrato: Often referred to as a Floyd Rose bridge after its inventor, like the two-point rocking tremolo, it provides individual intonation and height adjustments. It rocks on two bolts in the top of the guitar and is spring-loaded. The difference is that it clamps down on the strings at both the bridge and head nut. The result is rock-solid tuning, even when the vibrato arm is used radically.
But that's not the Ibanez we know today, although the two are related.. Japanese company Hoshino Gakki began importing guitars made by Salvador Ibáñez's company to Japan in 1929. This was so successful for them that they started producing their own similar guitars under this name in 1935. They started making modern guitars simply using the name Ibanez in 1957 and then, not being ones to hold a grudge given that the US Army Air Force destroyed their factory in 1945, began exporting them to the USA in 1971, and as they say, the rest is history.

AmpliTube's effects are as noteworthy as its amp modeling capabilities. The current version comes with up to 51 effects - modeled after rare vintage gear like Ibanez Tube Screamer, Arbiter FuzzFace, MXR Phase100, MXR Dynacomp, Electro Harmonix Memory Man and many more. What sets AmpliTube apart from the competition though is its very intuitive interface. No parameter is more than two clicks away, and its realistic looking graphics are extremely easy to operate - even allowing for drag and drop operations. If you want a quick setup software, AmpliTube is your best bet. Price: usually about $200 - Check out Amazon.com for the latest price and reviews

Gibson guitar are among the best in the world, but they can also be a little expensive. You can go with an Epiphone, but Gibson always has a few good options under the $1,000 mark as well. If you love the idea of owning a Gibson Les Paul but you’re struggling with the cash part of it, check out the Les Paul Faded. A little while back I grabbed the 2016 version and it’s been a fantastic guitar with the tone and feel of a Les Paul, minus the big price tag.

While many individuals who want to become guitar technicians dream of working with big-name bands, it is more realistic to work with smaller bands first to gain experience. Local bands often need extra help with many of the technical aspects of show production. Techs may be asked to perform other tasks besides guitar maintenance, such as stage set-up and breakdown, driving the tour bus and selling merchandise. All of these activities can provide techs with invaluable knowledge regarding staging live performances.

Another tone option for a guitarist is to put a pickup out of phase with another pickup, producing a thin "inside-out" squawky kind of sound. When 2 pickups are in phase, they work together and reinforce each other. When they are out of phase the 2 pickups are working against one another and the resulting sound is the "leftovers" from these cancelations. The closer the 2 pickups are, the greater the cancelations, the thinner the sound and the lesser the volume. Therefore, the neck and bridge pickups out of phase is the best choice for this type of sound.
I am a guitar teacher of 15 years and a tech junkie, so I prefer to steer people towards online video lessons. I believe that with the multimedia technologies of the 21st century, beginner video lessons are the most efficient way of learning guitar from home, and are most advantageous from a pricing point of view as well. I'll add some recommendations for video lessons after the book reviews, in case you want to see that side of learning guitar as well.
Loaded with a strong basswood body, this fella is the closest you can get to that booming mahogany tone of high-end instrument. The iconic combination of three single-coil pickups is of course there, and so is the three-way pickup selector. The sound is very resonant and articulate, making the guitar very well suited for the realms of classic rock, blues, jazz, and country. Metal is also within its reach, and so is light pop on the clear side.
{"product":{"id":"K47863","stock":"","price":"399.99","name":"California Redondo Player Acoustic-Electric Guitar","download":false,"sku_id":"","checksum":"368856727023","rep_id":"site51500000000140752","displayId":"1500000000140752","sku_rep_id":"","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
A few months ago, I decided that enough was enough, so I began to trawl systematically through Sound On Sound's interview archive, collating and comparing different producers' views on a variety of recording and mixing topics. Being a glutton for punishment, I also waded through the 35-odd interviews in Howard Massey's excellent book, Behind The Glass.

Im sure are techs at these stores that aren't bad AT ALL, but when you don't know who they are, I wouldn't trust them with a truss rod while you're not there standing over trheir shoulder watching them. I may just be paranoid, but hey, better safe than sorry is the way I look at it. I've done my own setups. And I plan to keep doing it until the day comes when I order myself a custom bass that I worked my ass off for, then I'll be willing to spend $50 on a 'properly' done setup. I dunno
Had a seven string Ibanez with loose/worn frets worked on. Steve knew right away that the frets had to be tacked and it could use a fret re-crowning and gave me a quote for 125$. I thought it was a bit high but trusted him because of the good reviews. Came back a couple weeks later and he had re-crowned the frets, tacked all the loose frets, tightened down some more loose hardware and did a set-up for only 100$. I am overall quite satisfied with the quality of the work and the pricing. I will be going back to have my acoustic worked on.
Besides, what about Eric Clapton, Duane Allman, Lenny Breau, Jeff Beck, Billy Gibbons, Albert King, Freddie King, Albert Collins, Buddy Guy, Chet Atkins, Hubert Sumlin, Eddie Van Halen, Wes Montgomery, Eric Johnson, Joe Satriani, Tal Farlow, or Joe Pass? I dare any guitarist to consider shredding "hard" after attempting to learn even a slowly paced Joe Pass tune.
The first electric instrument amplifiers were not intended for electric guitars, but were portable PA systems. These appeared in the early 1930s when the introduction of electrolytic capacitors and rectifier tubes enabled economical built-in power supplies that could plug into wall sockets. Previously, amplifiers required heavy multiple battery packs. People used these amplifiers to amplify acoustic guitar, but electronic amplification of guitar first became widely poplular in the 1930s and 1940s craze for Hawaiian music, which extensively used amplified lap steel guitars.[2]

The Omen-6 is a stripped down take on the Hellraiser, with the same sleek double cutaway design and HH (dual humbucker) configuration, but at a more affordable price point. But what's good about it is how Schecter is able to maintain the premium look and attention to detail at this lower price point, including the carved top design. While the name again implies something evil, this guitar is quite good for the price.
Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Natural, Sunburst

It all added up to a cartoonish minimalism that struck a vital cultural nerve when the Ramones burst out of Manhattan’s Lower East Side CBGB scene in the mid Seventies. They were the perfect antidote to the bloated self-indulgence of Seventies arena rock and the tendency—a hangover from the hippie era—for rock and rock musicians to take themselves way too seriously. The Ramones were passionate about rock, without ever being pompous.

The "Slide Guitar Extension Nut" presents a bad case of convenience to the manufacturer (only having to make one size) disguised as a convenience to the customer (pretending one size fits all). This thing is not very versatile. With an outer string spread of 1.75", it's made for a wide guitar neck so if yours is only average, the outer strings will be suspended off to the sides of the overall width of the neck. That's not insurmountable but it's also not something every budding slide player wants to tolerate.

When you're learning your instrument, having Books, Sheet Music & Media on hand is absolutely invaluable. It doesn't matter if you're a first time player or an old pro, this type of literature is going to help you to enhance your skills and become a better player overall. Think of having books, sheet music & media at your disposal like having the world's most diverse roster of teachers at your disposal 24 hours a day, seven days a week. By being able to learn on your own schedule, you'll find yourself playing new chords, progressions and songs in no time. So which books, sheet music & media are right for you? Well, as you can imagine, that's just going to be a matter of skill level and personal preference. If you're looking for a serious method book that will give you a solid basis in guitar technique, be sure to check out the Hal Leonard Guitar Method Complete Edition. This book and CD combo is designed to help anyone learn to play their acoustic or electric guitar. With convenient teaching ideas and fantastic audio assistance from Greg Koch, this set will help you cover all of your bases.

In 1933, Dobro released an electric guitar and amp package. The combo amp had "two 8″ Lansing speakers and a five-tube chassis. Dobro made a two speaker combo amp that was on the market over 12 years before Fender launched its two-speaker "Dual Professional/Super" combo amp. In 1933, Audio-Vox was founded by Paul Tutmarc, the inventor of the first electric bass (Tutmarc's instrument did not achieve market success until Leo Fender's launched the Precision Bass). In 1933, Vega sold a "pickup and amplifier set" which a musician could use with her/his existing guitar. In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson developed prototype combo amps, but these never got produced and sold. By 1935, Electro/Rickenbacher sold "more amps and electric guitars than all the amps and electrified/electric guitars made from ’[19]28 through the end of ’[19]34, combined".[1]
A towering figure in the Japanese underground beginning in the early ’70s, Keiji Haino plays guitar — often distorted to the point of pure sound — with such a wild diversity that it’s misleading to call him merely a “noise guitarist.” But he is very, very, very noisy. With personas that include blues-sludge hero, noise-blast deployer, and big-eared post-psychedelic improviser, Haino’s renown (and collaborations) spread far beyond Japan, most notably with albums recorded by Fushitusha, his all-improv/nominally rock outfit.
Taylors have a "happier" sound and I like the feel of them. I am a novice but from what I have seen for a beginner with an acoustic guitar, they felt and sounded warmer and less tinny than the laminated wood ones. A good rosewood taylor isn't on the cheap side of things but it feels like you can play better than you can. And the model I looked at had strings that were nice and close to the frets so you didn't feel like you were pushing in deep like the keys of an old typerwriter. Go into a Guitar Center or somewhere you can actually feel what you are getting before you buy anything. I got a cheap Gibson online less than a month ago and got what I paid for when it came with the bridge completely missing and a brassy sound when it was played. Buy your stuff in person. I think that Gibson is probably still a good brand, but the quality control of the cheaper models they put their name on is something I might question from my first experience with them...
1960's Harmony H-54 Rocket 2 Redburst- Here's another excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. There's just limited amount of wear on tips of headstock with a amlost perfect back. Two great sounding DeArmond Gold Foil Pickups power this baby. Guitar has a 4 bolt neck which was the better neck from Harmony. It's all original, except for the pick guard, which no one can detect. Condition excellent for this great 50 year old beauty. SOLD
2) Use a line-out box (I use the Suhr Iso Line Out box) between your amp and dry speaker cab to take a tap off the dry signal. Run the line-out signal into a small mixer, and run the outputs of the mixer into a stereo power amp and two guitar cabinets. As with the previous rig, use the mixer sends and returns to patch in effects—which you will set at 100 percent wet (no dry signal) and blend to taste. In this setup, you can blend the dry signal into your “wet” cabinets. For live applications, mic all three cabinets, and pan the wet cabinets hard left and right in the PA. This is the setup I use, and I was inspired to go this route by guitarists such as Steve Stevens and Eddie Van Halen. I like to blend a significant amount of dry signal into the wet cabs. In the PA, the sound is absolutely massive! I also use an expression pedal to control the amount of effects in my wet cabs, so I can tailor my delays and reverbs on the fly.
Let's look at how the professionals go about combining the close and ambient techniques we've looked at so far, in order to create specific custom setups for different recordings. Joe Barresi, for example, relies heavily on the trusty SM57 and MD421 combination, but he'll choose from a variety of other mics to give character to particular sounds. "The two microphones I use most for recording electric guitars are the Shure SM57 and the Sennheiser MD421, often both, close up, placed at the edge of the speaker, where the speaker centre meets the cone, or, if I'm looking for a more bright sound, dead centre. When I want more low end, I may have an AKG C414 on there, and when I'm after a little more personality, a Neumann U87, backed up a foot, or a ribbon mic, like the Royer 122, or an RCA BK5 or 77."
As I look at all the guitars you fellows have its a pleasure to see so many . to bad I live to far to visit Indianapolis IN .I have a 3/4 Stella that is about 69 years old that I got when I was about ...4 years old . Uncle John Hinson gave it to me for Christmas and I played the heck out of it. At about 12 years old I played in a theater here and was called Mevis Fresley . Rock and Roll and Country . So much fun I had for about a year then Momma and Dad said I had to quit as I was getting to popular, Oh well it was fun while it lasted.. Haven't met Pat Stockdale in person but that child can play a pretty Guitar. Good luck to you all Betty McLevey See More
Playing the guitar is no joke. To be honest, not all who bought a guitar end up playing. Maybe it’s just hype from friends and family or along the way found something else more interested on. You have to remember that you will spend countless hours practicing and the time you spent to it is impossible for you to get it back. This is not meant to discourage but to challenge you to succeed.
Being relatively new to the ABQ area, I've been checking out the local music shops and finding myself underwhelmed - that is until I walked into Grumpy's. Kevin is probably the last honest guy in the business. His pricing is more than fair - whether you're looking for repairs, custom builds, or gear - and he's more than willing to dispense advice or talk shop (not to mention his sense of humor). To put it succinctly; he knows his shit and doesn't blow smoke up one's ass! Sure, the shop doesn't have the "selection" that a place like GC might have, but Kevin can probably get anything you need. (Besides, what's more important - knowledgeable, down-to-earth customer service at a locally owned shop, or being ignored by douchebag wankers who came of age playing along to Miley Cyrus?!) Go to Grumpy's!
This page is a work in progress and as new information is revealed it will be added to the list. But I can't do this alone, folks. See a guitar not listed? Tell me! Listed below are the major manufacturers, known badges and suspected badges to the best of my knowledge in written and list form to make it easy to find out WHO MADE YOUR GUITAR! In some cases I won't know because the badge you have may be extremely rare and virtually unknown to even seasoned collectors.
Sometimes referred to as a fret “dress” and setup, The Works includes precision level, re-crown and polish of your instrument’s frets along with complete set-up of truss rod, string height (action) and intonation. This work will minimize fret buzz, eliminate fret pitting and divots, and improve your overall tone! The whole instrument will be cleaned and polished and all hardware and electronics inspected, cleaned, and lubed.
The Dean Vendetta pack offers a sharp looking metallic red super Stratocaster style guitar with dual humbuckers, a tremolo bridge for fun dive tricks, and a 24 fret neck. This is perfect for players that want to start learning lead guitar as soon as possible. The neck is quite fast for a guitar in its price range. Also included with the purchase is a 10-watt practice amp, gig bag, instrument cable, picks, a tuner, and a fairly comfortable strap.
PRS scale length falls between Fender and Gibson at 25 inches. These are typically set-neck guitars, often with carved tops. This style is a nice alternative for players who are looking for a middle ground between the warmth and resonance of a Les Paul and the tighter feel of a Strat. You’ll also see a lot of guitars that have that PRS look but are built to a different scale length.
By contrast, tuning (or pitch) correction processors and plug-ins are normally considered processors rather than effects, but they do have creative uses. The idea behind these devices is to monitor the pitch of the incoming signal, then compare it to a user-defined scale, which can be a simple chromatic scale or any combination of notes. Pitch-shifting techniques are then used to nudge the audio to the nearest semitone in the user's scale but, because the amount of pitch-shift required is usually quite small, the result doesn't sound grainy or lumpy, as often happens when large amounts of pitch-shift are generated. Because pitch tracking is used to identify the original pitch, only monophonic signals can be treated.
Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials; for example, a guitar may have a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft-grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.