The best ones are the ones that sound good to YOU and inspire YOU to play better, no matter how old they are, what’s in them or how many features they do or don't have. It follows that there are thousands of possible “best” amps from any number of brands, from old to brand new, that can fit this description. You just have to find the right one that fits your particular needs. Brand names don't matter so much as features here, so that’s why I'm not going to mention them specifically.
JSL, I agree with you on the Mayer comment. Any one who is bashing him needs to listen to his latest live album. kid rips plain and simple. I have to disagree with you on the Van Halen comment, not that he isn't a great player, but to me his playing always lacked substance, no soul to it. Now, I can't stand Clapton, (I won't get into why), but he should definitely be on the list.
A standard Squier Stratocaster is mass-produced in factories located in Indonesia or China. For its construction, Squier usually uses woods readily available in those countries, such asagathis and basswood. They also use stamped metal hardware and multiple pieces of wood in construction to reduce waste and to lower costs. In some cases, the body is laminated, much like a plywood, rather than consisting of two or three solid pieces glued together.
Several years after his last adventure, retired fortune hunter, Nathan Drake, is forced back into the world of thieves. With the stakes much more personal, Drake embarks on a globe-trotting journey in pursuit of a historical conspiracy behind a fabled pirate treasure. His greatest adventure will test his physical limits, his resolve, and ultimately what he's willing to sacrifice to save the ones he loves.
Which is what you’ll be doing with the Omen-6: laying down heavy riffs and unleashing screaming solos. Two overwound Diamond Plus humbuckers are responsible for the guitar’s hot and thick output, while a thin “C”-shaped neck, 14-inch fretboard radius and extra jumbo frets keep things fast and comfy. Although this doesn’t have a tremolo for those dive bombs, a Tune-o-matic bridge and string-through body ensure your sustain will sing for days.
{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars: raven","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop18":"skucondition|0||creationdate|1","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","prop17":"sort by","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,","prop7":"[gc] used"}
If you plug your electric guitar into the auxiliary input of your home stereo, you can get away with not buying an amp at all. All you need is a special, inexpensive adapter that you can purchase at any electronic or music store for less than $3. The adapter is just a metal or plastic-coated plug that has a female quarter-inch jack on one end and a male RCA (sometimes called phono) plug on the other. (Just tell the salesperson what you want to do, and he can supply the correct unit.) The following figure shows how the adapter and the guitar cord work together.
Featuring a small scale neck, the Squier by Fender Mini Strat Electric Guitar comes with three single-coil electronic pickups, with solid and intuitive master volume and tone control. The neck of the guitar is made of C-shape maple wood design, whiles the rosewood fretboard holding the strings and containing dot markings is designed in a manner that makes it easy to strum.
Bass amp speaker cabinets are typically more rigidly constructed, with thicker wood and more heavy bracing than those for non-bass amplification. They usually include tuned bass reflex ports or vents cut into the cabinet, for increased efficiency at low frequencies and improved bass sound. Preamplifier sections have equalization controls that are designed for the deeper frequency range of bass instruments, which extend down to 41 Hz or below. Bass amplifiers are more likely to be designed with heat sinks and/or cooling fans than regular guitar amplifiers, due to the high power demands of bass amplification. They are also more commonly equipped with audio compression or limiter circuitry to prevent overloading the power amplifier and to protect the speakers from damage due to unintended clipping in the power amp.
Grover Jackson became a partner with Wayne Charvel in the Charvel's Guitar Repair shop in California in the 1970s then Grover Jackson took over the entire business in 1978 and at that time they were making guitars under the name Charvel. Their guitars were tailored to the heavy metal and hard rock genre's of the day. Then a relatively unknown Randy Rhoads, who had just joined Ozzy Osbourne’s new band, contacted them in 1980 with the idea to create a highly customized guitar. That guitar, a new take on the Flying V called 'Concorde' became the first guitar to carry the Jackson brand and the company has been popular with shredders ever since.
Made famous by Dream Theater guitarist and loyal Mesa Boogie endorsee John Petrucci, the Tri-Axis presents the absolute best of modern rock and metal tone with a touch of that signature Mesa Boogie character. If you scoured the Petrucci forums in the 90’s and early 2000’s, you’d be the first to know John had quite a few of these, both live and in the studio. It was the Tri-Axis that contributed to the now legendary sweet singing tone he achieved on countless DT albums. The first thing you’ll probably notice about the Tri-Axis is it’s unusual interface, which features digital numbers and arrow buttons instead of knobs.  The Tri-Axis also boasts five 12AX7’s into one rack space. Furthermore, you can achieve tones from Mesa amps like the Mark I, Mark IIC+, Mark IV™ and much more.
Greetings from Adam Reiver! Welcome to the new FU-Tone website! (Formerly FU does so much more than upgrade parts for "Floyds" and FU just seems so fitting for the circumstances of the name change! I have been working on improving tone with the greatest guitarplayers in the world for the last 25 years. I have found out what works and what does not... I am happy to share this with you. Tone is selective! FU is dedicated to help you find what is best for YOU! Using the best materials available, FU manufactures the ultimate in high performance guitar parts used by the PROS! Obviously, FU specializes in locking tremolo parts but if you dig around the site you will find upgrades for your Strat, Les Paul, Tele, Acoustic and more. In my dedicated effort to bring you the best of the best, I will continue to design and manufacture new FU products as well as bringing in other items that I think are cool. Check back often, feel free to ask me questions and keep chasing TONE!
This guitar has a mahogany neck topped by a 20-fret rosewood fingerboard. It has a scale length of 25.62", while the nut width is 1.69". Since the AW54 is from Ibanez, you can expect the neck profile, string action and overall playability to be comfortable and beginner friendly. Wrapping up this affordable guitar's premium-like specs is its Open Pore Natural finish, which gives the instrument an earthy appeal that's easy on the eyes.

Processors, on the other hand, comprise an entirely different water heating appliance filled with piscean vertebrates, as they tend not to need any of the dry sound, other than in a few specialist applications. As a rule, processors such as EQ and compression are connected only via track, bus or master insert points — at least until you have the necessary experience to understand why you might want to break the rules once in a while. Having got that off my chest, let's look at some specific effects (we'll look more closely at processors another time).

A combo amp contains the amplifier and one or more speakers in a single cabinet. In a "head and speaker cabinet" configuration, the amplifier and speaker each have their own cabinet. The amplifier (head) may drive one or more speaker cabinets. In the 1920s, guitarists played through public address amplifiers, but by the 1940s, this was uncommon. A rare exception in the 1990s was grunge guitarist Kurt Cobain, who used four 800 watt PA amplifiers in his early guitar set-up.
Amazing unit! I loved using my POD XT Live for years and wanted to upgrade. This unit totally exceeded my expectations. Sounds amazing and it's incredibly flexible for routing processing and effects chains. They built the hardware better and it's got a better set of pedal buttons too. Absolutely recommend! (Plus, they announced at NAMM that there will be more model packs, so that's great too!)
So to get the most from your book, it’s important that you respect the intent of the author in how you approach it. That doesn’t mean you have to work through parts of the book that are below your skill level, it just means that you should always work through the book in a linear fashion. If you need to skip to the middle of the book to find something that applies to you that’s fine, just work chapter by chapter (or exercise to exercise) from that point on. It will help you retain the information that you learn in the book if you work through it gradually as opposed to skipping through it.
If you use amplifier overdrive, want to use delay and reverb but still crave simplicity—I’d suggest designing a “hybrid” pedalboard. Just run your gain and filter effects in front of the amp, and use a pedal like the TC Electronic Nova System in your amp effects loop for time-based effects. This will require more cabling between your pedalboard and amp, but will sound much better than running your delay and reverb effects into a distorted amp. Pedals like the Nova System or the Eventide units boast specs rivaling studio quality rack gear.
Featuring a comfortable neck and solid spruce top, the Epiphone Dove Pro Acoustic-Electric Guitar rings out with full, rich sound. Based on a design going back to 1962, the Dove Pro is equipped with a Fishman Sonicore pickup system that accurately reproduces its acoustic tone when you plug the guitar into an amplifier or PA system to play with amplified instruments. A terrific value.

{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: epiphone","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}

There are quite a few types of guitar shapes, with the most popular one being the dreadnought. However, contrary to acoustic guitars, many acoustic-electric variants come with some form of cutaway for better access to the higher frets. This can really come in handy for a wide range of techniques so you don’t have to play with your hand over the body, which can be uncomfortable.
First the lower line models were built for steel strings first. Like the style 17 in 1922, and the style 18 in 1924. Pretty much all models were built for steel by 1927-1929. But unfortunately there was no definative serial number or time line for any 1920s Martin style. This makes it difficult to determine if any particular 1920s Martin guitar is really built for steel strings. Martin didn't just implement steel string design at any one definative point. It was a transition, and apparently a very slow transition. And special orders for gut or steel complicated things.
Many arguments can be made for Peej’s gifted lead guitarist (and corn-dogging, cheese-mongering Stevie Ray Vaughan acolyte) Mike McCready, but it’s Gossard whose songwriting and toothsome licks propelled the Seattle grunge icons early, record-setting releases. The winsome chords of both “Daughter” and “Black,” the white-knuckle smash of “Animal” or “Deep” or “Do the Evolution” — all were anchored by Gossard, a quiet type more invested in classic-rock craft than classic-rock showmanship.

The easiest way to record bass is to just plug it straight into the console/interface—of course, using the correct instrument-level input or dedicated DI box, and not a standard line input. This will provide a nice, clean, deep tone, but it will likely lack the growl and grit that’s often desired—for that, you’ll want the sound of an amp. While you can always use a bass amp sim plug-in later, in the mix (see below), there’s nothing like the pants-flapping wall of low-end sound coming out of a real bass amp, if one is available. But most engineers will record both—a DI’d signal, and a miked-up amp. They can be combined later on, for the best of both worlds—the clean, round, depth from the DI, with the edge and midrange punch of the amp (but see below, for a caveat).

Guitar strap: If you intend to stand up while playing on guitar during live shows (and most people do), then you need to practice in the same position like when you’re playing live. Your muscles and hands are in a completely different position when you’re sitting down and when you’re standing, and that’s why you MUST get a strap right from the start and practice standing up, as well as sitting down. Price: $10 – $15 should do the trick.
Because bass amps have to reproduce lower frequencies than an electric guitar amp, and it takes more amplifier power to reproduce bass frequencies, a bass player will typically need three or four times the wattage of the electric guitarist.[16] For example, if an electric guitarist has a 100 watt amp, the bassist in the band should have a 300 to 400 watt bass amp. For electric guitar amps with 50 watts or less of power, a bass player may need an even higher multiple. While an electric guitarist will often find that a 50 watt amp will be adequate for rehearsals and mid-size performance venues, a bass player performing alongside this electric guitarist will typically need at least a 300 watt bass amp, six times the power of the electric guitar amp, to get a good bass volume. "More advanced players who regularly gig in small to medium sized venues...typically [use amps that] produce 300-700 watts of output."[17] Bass players using bass stacks in very large venues (e.g., stadiums, outdoor festivals) may use amp heads that put out 750 to 2000 watts of power. British rock bassist Mo Foster tours with a 1,500 watt bass rig.[18] Somewhat controversially, as there is no clear engineering support, many think that a tube bass amp will sound louder than a solid state bass amp of the same wattage.[19]
The Boss ME-80 has two modes of operations. MEMORY mode lets you scroll through banks and presets more like a conventional multi-fx unit, and MANUAL mode is what we described earlier, where you can use this pedal as if you had a bunch of effects on a pedalboard and just start tweaking away. MANUAL mode is really where this unit shines, and makes it stand out from other multi-effect pedals. The presets are okay for getting a taste of it, but as is typical of presets many are over the top.

To preserve the clarity of the tone, it is most common to put compression, wah and overdrive pedals at the start of the chain; modulation (chorus, flanger, phase shifter) in the middle; and time-based units (delay/echo, reverb) at the end. When using many effects, unwanted noise and hum can be introduced into the sound. Some performers use a noise gate pedal at the end of a chain to reduce unwanted noise and hum introduced by overdrive units or vintage gear.[12]
Now check both the open and the 12th fret notes again. You’ll have to tune the open string again because by moving the saddle, the tension of the string will have changed and so will need to be retuned. Once you have correctly moved the saddle so that both the open string and the 12th fret are in tune, you can move on to the A string. Repeat until all of the strings have been done. Note that on this particular guitar, the (thick) E, A and D saddles could not be moved far enough forward to intonate correctly, so I had to swap their orientation to give a bit more distance.

Following on from the previous article, we look at the grand-daddy of all pickup selectors: the 4-pole super-switch. The possibilities with this switch are endless, and we scratch the surface by coming up with a wiring scheme for an HSH guitar that auto-splits the humbuckers in the 2 and 4 positions, and combines both humbuckers in the middle position.

Also worth an honourable mention is the iconic Gibson Hummingbird, a square-shoulder dreadnought named after the bird which Gibson best felt described its unique qualities. The Hummingbird is one of those unique things in that it’s an acoustic guitar which eschewed the industry-standard natural wood finish of around 98% of its peers in favour of a cheery sunburst finish more commonly seen on Gibson’s now famous electric guitars like the Les Paul and ES-335.

Secondly, I have an Epi Les Paul 1960 Tribute that i had PLEKD, which made a big difference to how it plays. However; i have an ongoing issue with it since, the G string always plays muted - i have changed the strings several times since but to no avail, other than that it plays really well in my opinion albeit i am only a learner with little experience. I have gone through the steps in your article but again all to no avail - have you any ideas as to what may be causing the muted tone (that's how i'd describe it anyway) and any thoughts on a possible solution you may have would be welcomed.
New to the music scene, and never one to stand on formality, I had a chance (multiple chances) to visit Grumpy's Guitars and Stuff, and was never anything but treated with respect, courtesy, and professionalism. My purpose for the visits were neither to buy, nor to have repaired, an instrument. It was to have the proprietor take a look at the bass that I had build. To give me his opinion and estimation on how I did. He walked through the process I'd used, for defretting, paint stripping, and then staining and poly sealing. Demonstrated how to adjust the truss rod, and complimented me on the work I'd done. All while setting aside his own work (A gorgeous early era hollow body electric Gibson.) I was charged a grand total of a great conversation for the tutoring and advice... Above and beyond! The selection of instruments was impressive -- and Grumpy's is the ONLY music/stringed instrument store I've entered in Albuquerque with not one, but 3 double basses, including an electric, and 2 classic uprights. Thanks for the great service, and awesome selection! I'll be by to have my '62 Fender Re-Issue pickups ordered through you, and to see about switching to a new brand of flatwound, when I break my next GHS.
If this were a list of the best electric guitar brands for metal it is very likely Jackson would be near the top. This is a company practically synonymous with metal, and for decades the most extreme players on the planet have looked to Jackson to get the job done. But Jackson also has a strong presence in the rock and hard rock genres, and if that’s your bag you’d be smart to give them a good look.
From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.

The fact that his guitar playing is as relevant today and is still loved by generations (even those who weren’t even born at the height of his success!) is proof that Eric Clapton is a guitar hero in many people’s eyes. Who can forget him singing, with just his string guitar, about his late son in ‘If I Saw You In Heaven’. The overwhelming emotion is enough to send shivers down your spine.

The main advantage of the Rocktron Velocity V10 is the low price tag. It is one of the better values for beginner guitar amps out there. There is nothing particularly amazing about the Velocity V10 in its own right, but it can potentially cost less than half as much as some other beginner level amps. The Velocity V10 is capable enough to be a solid practice amp with a price that almost nothing of similar quality can match. It is a good budget option that delivers on all the actually necessary features.
Thanks for this explanation. I have built a few electric guitars, but they have been in the Gibson style with two humbuckers. I am now working on a guitar with an HSH configuration, so for starters, I needed to understand the basic 5 way switch, which if you just looked at it, it makes no sense. Now I see that the wipers of each pole are on the opposite end of each side.

Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.
Go ahead – visit a music store and spend a few minutes on different guitars. If you see the same models listed here, that’s great. If not, then look for a model that has roughly the same size and shape as the one you’re eyeing. If you’re keen on buying an acoustic guitar online, take note of the model or size that feels the most natural to you, then go for that.

If you’re recording or practicing at home, or you think your own amplifier sounds like garbage you’ll enjoy the Cab Sim switch. This when activated, causes your signal to simulate the sound of a mic'd up guitar cabinet rather than your direct amp signal, which is extremely useful when you want high quality recordings at home direct to a DAW, or you just can’t seem to make your amplifier sound good!
A common format of bass amplifier–the "combo" amp–contains the amplifier electronics and one or more speakers in a single wooden cabinet. Combo amps have been used by musicians since the 1920s, as they are convenient for transporting to rehearsals and for performances at small to mid-size venues. Combo amps range from small, low-powered "practice amps" used for individual practice, to mid- and large-size and more powerful combo amps which produce enough volume for rehearsals and small to mid-size venues (e.g., nightclubs). For larger venues, such as stadiums, bassists may use the "bass stack" approach, in which one or more separate speaker cabinets, each with one or more speakers (but not containing an amplifier) and a separate "head" containing the amplifier electronics are used. With a large "bass stack", a bassist can obtain a much higher wattage and onstage volume than a "combo" amp could provide. As with an electric guitar amp, a bass amp is not simply used to make the instrument louder; performers use the preamplifier and equalizer controls and, particularly in amps from the 1980s and 1990s onward, the onboard electronic effects, to create their preferred tone.
Jazz guitarists need to learn about a range of different chords, including major 7th, major 6th, minor 7th, minor/major 7th, dominant 7th, diminished, half-diminished, and augmented chords. As well, they need to learn about chord transformations (e.g., altered chords, such as "alt dominant chords" described above), chord substitutions, and re-harmonization techniques. Some jazz guitarists use their knowledge of jazz scales and chords to provide a walking bass-style accompaniment.
Here's another guitar many people feel is a great value. This Pacifica features an agathis body, maple neck, and rosewood fretboard, with two single coil pickups, and one humbucker. The consensus is the guitar is reasonably well made, and the quality of the wood tends to be high. Those who go on to become serious guitarists might want to consider upgrading the electronics of the Pacifica HSS.
Echo – There is some crossover between delay pedals and echo pedals, but as a general rule, you can think of echo effects as extended delay effects. It’s a brother of reverb pedals, producing the canyon-like echoing you would naturally hear in a wide-open space. With long enough settings, an echo pedal can even let you harmonize against your own notes as they repeat.
The Epiphone Dove Pro continues to work its old school magic into the hearts of guitarists, new and experienced alike. Its classic styling seems to be a major part of its appeal, as most reviewers attest to. Value for money comes in as close second, with many satisfied that they are getting a great looking solid guitar at a very justifiable price point. It is used in many different musical styles, including country, folk and even rock.

Microphonic Pickups: Generally this is more of a problem with covered humbuckers, and more often than not it is caused by vibration of the cover itself. The easiest way to determine if this is the cause is to remove the cover. Typically there are two solder points which need to be de-soldered. If the microphonic condition goes away, you have four options. The first is to leave the cover off. This will affect the tone if the metal cover is magnetic, otherwise it will not. However, the cover does provide protection for the pickup and I'd advise leaving it, the pickup was designed to have a cover. Second is to have the pickup wax potted, this involves setting up a wax pot, and there is risk of damage to the pickup. Third is to apply a layer of silicoln inside the cover and seat the pickup in the cover before it dries making sure not to push it all out, but getting it up around the sides of the pickup. This is safe, easy and effective, but makes a mess of the pickup for future repair. (not a big concern IMO) The fourth option is to do a partial wax potting. Get some parafin from the grocery store. Boil a small pan of water then remove it from the heat. Place a chunk of wax in the cover press the wax into the holes to prevent water getting into the cover, and hold the cover on the surface of the water with a pair of tongs.As the wax softens spread it around and up the sides with a spoon. Resoften the wax until you can easily seat the pickup in the cover. This is much safer and easier than true wax potting.
When you are shopping for effects pedals, a good feature to look for is true bypass. Your overall signal path is vulnerable to noise and impurities introduced by the circuitry of anything between your guitar and your output device (such as your amplifier/speaker). Pedals without true bypass, or ones with buffered circuitry, will contribute to some signal degradation as your signal passes along the path because the signal is routed directly through the pedal circuitry. Pedals that have true bypass direct your signal around the pedal’s circuitry, or bypass it, when you switch the pedal off, thereby maintaining the integrity and cleanliness of the signal. Your amplified guitar will sound more robust as a result and you won’t be required to crank up your volume as much to compensate for lost signal. The only disadvantage of pedals with true bypass is that sometimes, when you're playing with distorted or high-gain amplifier tones, you might notice switching noise when you switch the pedal off and on.
Super info. thks. Just found your site as I too, had some questions about action. I have a Martin D-28, manufacture date late 2013 and I purchased new in Feb. of 2015. It has always been humidified and kept in the case. I only really noticed the ‘high’ action when I changed to drop D tuning and I noticed amplified ‘string whip’. I estimate the height to be 4mm. I re-tuned and looked again and the action is noticeably higher than my Epiphone EJ 200 and Simon & Patrick Woodland Folk. I think, as you have said, the guitar is just getting acclimatized to it’s ‘new’ home. Play ability is still good, (although the player needs work!) but I think I will take it back to Folkways Music to have the Tech take a look. Thks. Great site, I will bookmark it!

I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar.  I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best.  You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment.  You get treated like a valued customer.  Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars.  They have a great variety of quality instruments.  Plus, they have some really cool, unique guitars.  A place like this is so rare nowadays.
Gibson has issued two Signature Les Paul guitars for Joe Perry of Aerosmith. The first was developed in the 1990s and was customized with an active mid-boost control, black chrome hardware, and a translucent black finish. It was replaced in 2004 by a second, more visually distinctive Les Paul, the Joe Perry Boneyard Les Paul. This guitar is characterized by Perry’s custom “Boneyard” logo on the headstock and a figured maple top with a green tiger finish, and is available with either a stopbar tailpiece or a Bigsby tailpiece; Perry typically uses a Bigsby-equipped Boneyard model in Aerosmith and solo live shows.
In this example I used the "Sub Engineer Bass" patch included in the Kontakt 5 bass collection. But there are no rules in this regard: a simple sine oscillator can do the trick just fine. Back in the '60s and '70s it was not unusual to use a Rhodes to achieve the same effect, and Roland's famous JUNO-106 was also used on countless occasions with the same goal in the '80s. Just give it a go with whatever you have at hand!
No reference materials are available to me for this early Unicord period of Univox amplifiers, but there was undoubtedly a line. These American-made amps featured tubes and use high-end Jensen speakers. The Univox logo was on the upper right corner of the grille on a large piece of plastic. The cabinet was covered in charcoal-flecked tolex with white beading, with a grey grillcloth. Front-mounted controls included two inputs, volume, tone, tremolo with speed and intensity, plus footswitch jack with footswitch. The jewel light on these early Univox amps was a little red square.
Let’s start off with a guitar’s signal. As the driving force behind the entire effects chain, a guitar’s signal (more importantly, it’s voltage) must travel through the input cables and all of your effects pedals before it can reach the amp. As you can imagine, by the time a guitar’s signal finishes making its way all the way to the amp, the signal will undoubtedly suffer from a bit of degradation, losing its tone and body in the process. It's not your guitar's fault, it's simply the nature of electricity.
Gretsch re-emerges with this awesome rex acoustic-like electric guitar that defines quality and perfection in terms of style and elegance. Te Jim Dandy Flat Top G9500 is one of the Gretsch best electric guitars which effectively brings back the quality and sound that characterize one of their most famous guitars throughout the 30’s, 40’s and the 50’s era.
Thanks for your opinion Sheils. While your advice is appreciated, certainly no two guitarists would come up with the same guitars for any given list, or present an article like this in the same way. However, you did mention a few points hopefully readers might find useful. Constructive feedback, and the expression of different opinions, is always welcome.
Finally moving over to the flipside, there is a certain issue with the amplifier which I’m not quite able to understand. Don’t get me wrong, it is a very good 10 Amp Amplifier from Hollinger, but somehow you get this buzzing noise when you set it in full volume. At a lower volume however, it sounds just fine. Even the distortion button works well, and helps you work up some pretty cool effects. All other accessories work fine, and aid your growth as a fresh learner.
However, in the October, 2018 issue of Premier Guitar (at least the online edition) Frank Meyers, who runs the website Drowning in Guitars, says the Kent 700s were made by a small factory called Hayashi Mokko. Frank is a true expert in vintage Japanese Guitars, so I am inclined to believe him. This is another important piece of the Kent Guitars story.

Yeah. He may have to sit down when he plays, but he’ll have you on your feet when he does. BB’s creamy yet piercing tone, his unique vibrato and his absolute flawless ability to express his emotions through the guitar earn him a spot in the top ten. King’s years of fame haven’t gone to his head. He is still as humble as ever giving front row seat tickets to fans waiting in a cold parking lot just to have a glimpse of him. BB King can’t play chords. Nor does he sing and play at the same time. But he has worldwide recognition of his accomplishments as an artist. That’s a mark of a truly great guitarist.

Searching 'guitar' on YouTube, Google, etc can be overwhelming. Ten billion results come up. I wish we could just be nice to kids with questions. I noticed this answer mentioned "pickups" several times. Kid probably has no idea what a pickup is. My brother showed me the switches, pickups, and explained them to me in five minutes, in person on a real guitar. It was like being taught magic.

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Blue

The MD400 has one Alnico V humbucker at the bridge and one Alnico V mini-humbucker at the neck. Both are ‘rail’-style pickups, which are quieter, and provide more consistent tone and sustain across the strings. Both pickups have been coil-split, too—so push or pull the master “Tone” knob to disable one coil of each humbucker, effectively turning them into single-coil pickups.

{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: palmer","pageName":"[gc] shop by brand: palmer","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop by brand: palmer","prop1":"[gc] shop by brand: palmer","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"palmer","prop5":"[gc] shop by brand: palmer","prop6":"[gc] shop by brand: palmer","prop3":"[gc] shop by brand: palmer","prop4":"[gc] shop by brand: palmer","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section"}
{ "thumbImageID": "IJXB150B-Jumpstart-Bass-Package-Red/H86341000005000", "defaultDisplayName": "Ibanez IJXB150B Jumpstart Bass Package", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Red", "sku": "sku:site51337871402773", "price": "279.99", "regularPrice": "279.99", "msrpPrice": "434.00", "priceVisibility": "1", "skuUrl": "/Ibanez/IJXB150B-Jumpstart-Bass-Package-Red-1337871402773.gc", "skuImageId": "IJXB150B-Jumpstart-Bass-Package-Red/H86341000005000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51337871402692", "price": "279.99", "regularPrice": "279.99", "msrpPrice": "434.00", "priceVisibility": "1", "skuUrl": "/Ibanez/IJXB150B-Jumpstart-Bass-Package-Black-1337871402692.gc", "skuImageId": "IJXB150B-Jumpstart-Bass-Package-Black/H86341000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut Sunburst", "sku": "sku:site51441035713446", "price": "279.99", "regularPrice": "279.99", "msrpPrice": "434.00", "priceVisibility": "1", "skuUrl": "/Ibanez/IJXB150B-Jumpstart-Bass-Package-Walnut-Sunburst-1441035713446.gc", "skuImageId": "IJXB150B-Jumpstart-Bass-Package-Walnut-Sunburst/H86341000006000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
In 1974 Martin Sigma electrics included two SGs, a Tele and a Fender bass. The SBG2-6 was pretty much a straightforward SG copy with a bolt-on neck, center-peaked three-and-three head, block inlays, large pickguard, twin humbuckers, finetune bridge, and stop tailpiece, in cherry. The SBG2-9 was pretty cool, with a natural-finished plywood body, white pickguard, rosewood fingerboard with white block inlays, gold hardware and Bigsby. The SBF2-6 was a Tele with rosewood fingerboard, three-and-three head, block inlays, neck humbucker and bridge single-coil. The SBB2-8 was the bass, with natural finished body, three-and-three head, rosewood ‘board, block inlays, white ‘guard, and two humbucking pickups.
I'll be honest .. my Washburn N4 is hands down the best I've ever known. To me, Les Pauls sound amazing but are heavy and play like a log cabin. A buddy of mine's Suhr Strat felt/sounded clinical and small. An old Gibson SG felt like a cigar box jobbie. I remember in the early 90s looking at the Vai Ibanezes and the body was great despite the zany colors but the neck was too thin and whispy. I had the frets leveled and crowned and the action on mine 10 years ago and it just plays and feels like butter .. maybe 2 - 2.5mm at the 12th fret. The neck I sanded with 2000 grit now slighty reflects light so it glides beautifully feeling like 'satin wooden glass'. My aftermarket pickups puts the tone squarely into a modern fusion rock camp of sorts .. Oh yea and I think it's the neck shape of these Davies N4s that might make them so cool. The nut is a wider, more comfortable 1 11/16 inches with a flat fingerboard radius .. so may of the others seem like 1 9/16 with a cramped, rounder fringerboard. I did try a JP6 I didn't care for the feel of .. tl;dr ymmv :)
{"pageName":"[gc] pdp: samick artist series electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","products":";114368474;;;;evar65=Used-Guitars-Samick","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}
T3 (2009) – The T3 shares the same body styling as the T5 with some electronic and structural differences. It is a semi-hollow-body because it has a solid center block in the body. It comes standard with a quilted maple laminated top, and has and electric style bridge. The electronics include multiple humbucker pickups, coil splitters, and push-pull tone and volume pots. The T3 is available with the optional Bigsby vibrato in the T3/B.
Whether you're picking up a guitar for the first in your life or have been rocking the stage for years, there is a left-handed instrument out there that's just right for you. Electric guitar design and construction varies depending on the size of the body and shape of the neck, tonewood, bridge and pickup. Different woods produce different tones. Higher end guitars are usually made of hardwood like alder, maple or mahogany while a plywood or pine option gives exceptional durability perfectly suited to a beginner or student musician. The guitar's body typically comes in solid body, hollow body or semi-hollow body. Harder rock musicians often favor a solid body for louder, more vibrant pickups and feedback, while an acoustic performance would benefit from an acoustic guitar. The neck of a guitar is another consideration. A shorter neck would generally be seen on a smaller guitar; a musician who does not have large hands would appreciate the easier handling of a smaller guitar. The majority of electric guitars have six strings; however there are seven, eight and 12 string options for those who have mastered their left-handed guitar and are looking for ways to boost their performance. Left handed guitarists have made a rich and impressive mark on the history of popular music. No matter if you plan to rock the stage in front of an adoring crowd or just want to riff with your buddies at home, there is a sensational left-handed guitar out there waiting for you.
I'm also retarded. And my father used to beat me with my decca.... Im also the ex-ceo for decca inc. Your guitars are worth mere pennies.... litterally, Deccas were originated in the late 60s for young children to pretend to be their idols.. Deccas were packaged in cereal boxes as ready-to-go kits.. you assembled them yourself... they are made from old left over popsicle sticks.. So Im glad to put your high hopes and sleepless nights of wondering whos going to come up to you and tell you your old guitar is rare and worth thousands... Because frankly it will just never happen..
RARE Epiphone Vintage FT-150 Bard Lefty Conversion with bone saddle. Spruce top, rosewood back and sides. Medium to low action. Beautiful sounding and playing guitar. Superb projection. Rivals guitars costing thousands.In excellent cosmetic condition with normal fretwear for a guitar it's age, and tiny dings here and there but nothing that stands out and looks gorgeous. Includes original right-handed, adjustable bridge. Includes hard shell case and original right-hand adjustable bridge if you wanna convert it back to a righty!
For better or worse, by 1982 the taste for natural-finished, neck-through guitars with lots of switches and active electronics had begun to move on. On the horizon were the brief affair with weird-shaped “heavy metal” guitars and the impending first Strat-mania and the rise of Superstrats which would pretty much define the remainder of the decade. 1982, and the 18 and 28 Series, marked the end of Martin’s direct manufacture of electric solidbody guitars.
When two pickups are wired in series, a good portion of the treble frequencies is lost because the long pickup wire works like a resistor. Any resistor in the signal path will suppress the signal. The formula works like this: The longer the wire, the higher the resistance, and the more treble is lost. We all know this from guitar cables: When you use a very long guitar cable, the sound isn’t as detailed and transparent as it is with a shorter cable. A long cable acts as a resistor.
{ "thumbImageID": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "defaultDisplayName": "Ernie Ball Music Man StingRay 5 HH 5-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pace Car Blue Maple Neck", "sku": "sku:site51312645331323", "price": "1,699.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck-1312645331323.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "India Ivory Maple Fretboard", "sku": "sku:site51312645326641", "price": "1,749.00", "regularPrice": "2,049.00", "msrpPrice": "2,049.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard-1312645326641.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard/515512000007000", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
• Don’t always blame the frets: Buzzing doesn’t necessarily mean there’s a fret problem. Some guitar players set their bridges for super-low action in their quest for speed, and that can makes frets buzz. For beginners unfamiliar with how accurately tuned strings sound or more experienced players exploring dropped and open tunings for the first time, buzzing can also be a buzz kill. Low tunings like dropped D and open D and open C may prompt guitars with normal action to buzz due to the slack in the strings unless a guitar is set up properly to accommodate such tunings.
Introduced in the late '90s, the PRS SE line was the company's entry into the already tough entry level market competition. With it, one can own a PRS guitar at a much lower price point, with the main difference being the country of origin, which for the case of the SE is Korea. The SE Standard line takes affordability a step further by having the production done in Indonesia, while still maintaining high quality standards.
Most newbie guitarists want a small amp that sounds good but doesn’t cost too much. The amps listed above are that and more. However, there are some guitar players who mean business from the beginning, and won’t want to waste time on small beginner amps when they have the resources and ambition to grab an intermediate or pro-level amp. If you know you are going to stick with playing guitar, and if you can justify it in your budget, that’s not a bad idea.

5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.

Hopefully, this list of easy guitar riffs has provided you with some ideas of memorable riffs you can learn as a beginner or intermediate player. The great thing is, there are tons of resources out there to help you learn all of these songs. Depending on which medium you prefer to learn from (written, audio, or video) links to each are included above for all songs.
To create a thicker rhythm guitar sound, overdub the same part one or more times. Depending on the desired effect, the overdub can be treated as one mono signal and mixed to the same stereo position, or panned left and right for a stereo double-tracked sound. Alternatively, treat the original track with an ADT (Artificial Double Tracking) effect. This can be done with a digital delay set to around 40 milliseconds. Again, the delayed signal can be panned or mixed as one with the original guitar track.
Leo Fender's work is timeless. This is easily deduced by simply looking at the popularity of both Stratocasters and Telecasters. With that said, Strats are arguably the favorite between the two. A top of the line American-made Stratocaster still costs a bit more than what our budget here is, however, there is an alternative. Fender's plant in Mexico builds great Stratocasters that aren't really behind their American counterparts. You essentially get a near identical performance at a more affordable price due to the stigma. The Fender Classic Series '70s Stratocaster is one such guitar.
Electric guitars vary greatly in sound, look and playability. Different designs, quality of craftsmanship, electronics and choice of woods make them sound, look and feel different from one another. It's the luthiers' goal to combine the best of these elements to create the next masterpiece. Our task is seeking and offering the finest tonewoods available to make that goal a reality.
The neck is also crafted from mahogany, topped by a 20-fret rosewood fingerboard with a standard scale length of 25.5" and a nut width of 1.75". In contrast to its vintage looks, the neck follows a slim "C" profile that is as easy on the hands as it is on the ears. Finally, this guitar is wrapped in a nice gloss cherry red finish that stands out easily on any stage. Check this one out if you're looking for a quality mahogany body acoustic guitar with an old school vibe.
Most[citation needed] early blues harmonica players throughout the 20th century[when?] have been known for using Hohner Marine Band harmonicas[citation needed] because they were the most available at the time[citation needed]. However, as other harmonica companies[who?] began to expand and Hohner produced different types of harmonicas, harmonica players started to develop preferences[vague].
The Fender Hot Rod Pro Junior III is a good example of what the older style beginner amps used to entail. The initial price tag is much higher than the typical beginner amps popular today, but it is also a better made, better sounding tube amp. The Hot Rod Pro Junior III can be cheaper in the long run for guitarists that want to eventually do professional work. Most beginner amps are not powerful enough or sound good enough to quite cut it as a professional amp. The Hot Rod Pro Junior III is a simple amp that provides the bare essentials to get a professional level sound. Going the Hot Rod Pro Junior III route is a bit less conventional for beginners, but it is a solid option to consider if plans of recording or playing live lay in the future.

Ibanez is a Japanese music instruments manufacturer that has produced some of the most iconic guitars of the 20th century. Established in 1908, the company started to design the first guitars in 1957. Ibanez was one of the first companies to gain popularity in the US and Europe markets. It also was the first to mass-produce 7- and 8-string guitars.

Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black
If that were true, you'd have to take into consideration everything that vibrates after the string is stuck (the strap, the plastic of the knobs). You vibrate as well. So in essence, what you're saying is...the contents of your stomach affects the signal going to the amp. Hell, what wood your floors are made of affects the tonal quality. Maybe if you hit it hard enough you can get the ceiling involved.

In May ’71, Ovation tried once more. It introduced the K-1217 Typhoon V bass, about which no information is available, but based on the Eclipse, the difference may have been pickups. The K-1235 Eclipse was also introduced. This was a guitar offered only in a black finish that looks somewhat like graphite. It had chrome hardware, no binding, dot inlays, three-way select and two volume and two tone controls. The pickups had metal covers with black inserts and a single blade-style pole. In June ’72, all Electric Storms were discontinued except the Tornado and Eclipse, which made it another half year, until January ’73, by which time the Electric Storm had subsided into quiescence.
There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.

Tone woods only effect acoustic or hollowbodys. The more dense wood harder tighter grained woods along with steep pitched saddle to stop string angle increases sustain.research labs experimented with marble body's and had tremendous sustain.also effecting sustain is type of bolt on set or thru. A bolt on May have equal sustain to a set if the thickness of body at bolt joint is made thicker but thru are best all have give and takes. Thru are less adjustable and limit repairs. Bolt on offer more adjustment. Set necks can be replaced or reset but cost more to do so. Thick heavy gibson let Pauls are known for the sustain.but endurance limited by heavy weight. It's all matter of choice. Buy usa or if not available japan. Stay away from Chinese or Korean they are bottom feeders

To quote the super-helpful, "The Hiwatt DR103 is notably louder and can also run much cleaner than 100-watt Marshalls when needed, and they also have tremendous headroom available. Playing a Hiwatt at a loud volume is, well, an experience." The site adds, "The Hiwatt DR103 design is based around the use of four EL-34 power tubes and four 12AX7 preamp tubes. The transformers are set up so that the amp can be used with various line voltages around the world and speaker impedance can also be set to 4, 8, or 16 ohms with two speaker outputs wired in parallel."

{ "thumbImageID": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "defaultDisplayName": "Rogue Starter Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blue Burst", "sku": "sku:site51275425409510", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Blue-Burst-1275425409510.gc", "skuImageId": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut", "sku": "sku:site51275776901291", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Walnut-1275776901291.gc", "skuImageId": "Starter-Acoustic-Guitar-Walnut/519266000115000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pink", "sku": "sku:site51275776901306", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Pink-1275776901306.gc", "skuImageId": "Starter-Acoustic-Guitar-Pink/519266000218000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901295", "price": "49.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Black-1275776901295.gc", "skuImageId": "Starter-Acoustic-Guitar-Black/519266000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Matte Natural", "sku": "sku:site51275425409512", "price": "59.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Matte-Natural-1275425409512.gc", "skuImageId": "Starter-Acoustic-Guitar-Matte-Natural/519266000049000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red Burst", "sku": "sku:site51275776901310", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Red-Burst-1275776901310.gc", "skuImageId": "Starter-Acoustic-Guitar-Red-Burst/519266000224000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
I'd never heard of this brand but was recently in a store in North Carolina looking for a nylon string guitar. The salesman asked me if I was "open minded" and if I'd be receptive to trying a brand that I probably had never heard of. He handed me a really pretty instrument with a very different looking headstock. I immediately figured he was showing me a very expensive instrument. I asked how much it cost, but he didn't answer. He simply replied "Try it, then let me know what you think." I had no idea how much this guitar would cost, and honestly I hate guessing games, but the guitar was really beautiful. I played several classical guitars there that day. A Yamaha, a Cordoba and an Alvarez, but the Merida was unquestionably the best sounding (and looking).

I'm looking for a similar guitar. My first electric in 1969, purchased used for $50.I lost it sometime in the 70's, but still have a picture of it. It was a sunburst finish cutaway violin shaped body with Bigsby type tailpiece and a tunable bridge with a flip up mute bar. The headstock is similar to a Gibson but the neck was thinner.I can't remember how it played or sounded.I'm just looking to replace it for nostalgic reasons. I also recently purchased a Kent Les Paul copy I found on e bay while searching for kenr guitars.I have seen the framed ads but I have yet to find that model.
Gibson lost the trademark for Les Paul in Finland. According to the court, “Les Paul” has become a common noun for guitars of a certain type. The lawsuit began when Gibson suedMusamaailma, which produces Tokai guitars, for trademark violation. However, several witnesses testified that the term “Les Paul” denotes character in a guitar rather than a particular guitar model. The court also found it aggravating that Gibson had used Les Paul in the plural form and that the importer of Gibson guitars had used Les Paul as a common noun. The court decision will become effective, as Gibson is not going to appeal.[48]
The Top Guitars specialized only in Custom Made Electric Guitars and Basses - "We will create an instrument that will delight you with exceptional tone and great playability, optimized to your personal preferences and all with the utmost quality, beauty, and rigorous attention to detail. We are experienced builders of custom electric guitar and bass bodies and necks. We craft our exquisite custom electric guitar and bass bodies and necks using a variety of time tested, great sounding woods, offering options that you can not buy off the shelf. We can also build for anyone that has a custom design that they would like built to their specifications. We do our best to meet your dreams continually striving for unattainable perfection.Only the best, one-of-a-kind, and built just for you! "
SCALE LENGTH What is a "Scale Lenght?" The scale lenght is the lenght the string travels between the nut at the top of the fretboard and the bridge at the mid section of the base of the guitar. To determine the scale length of your guitar you would measure from the front part of the nut where it meets the fretboard to the center of the 12th fret on the neck and multiplying that by 2. Add about 3/16" to that on the low e string and taper that to about 1/16" added to the high e string. This is called compensation and that is why you see that tapered line on a bridge. Go to Stewart MacDonnaldfor more info. They also have a Fret Calculator that helps you determine your particular scale length in addition to a page dedicated to helping you out with tons of free info for your guitar building projects.The fret is the metal of nickle wire that is raised up off the fretboard. I would suggest buying a neck that has been pre made from a manufacturer that fits the design concept that you want to go with. I bought mine from Guitar Parts USA for about $70. You can pay anywhere from $50 to $300 for a neck at online retailers, but surf around and make sure you are satisfied with what you get. Guitarpartsusa will tell you to buy an expensive neck if you are building an expensive guitar, not a $70 neck. But for mine the $70 neck works just fine. Once you get the neck in and you determine what the scale length is you can lay it all out on paper. I recomend buying all your hardware, pickups and knobs before you draw your final template. This will allow to place everything where you want it and know what size holes to drill for the electronics and how big the cavites will need to be for them and the pickups.
It's always hard to rate amps when mixing high gain with vintage, boutique amps and the mass produced monsters, but including S.S. and digital technology seems to be a unrealistic stretch. That being said, this manufacturer is making some of the best sounding vintage type tube amps I've heard to date. their lineup of vintage Fender style amps are all excellent, and considerably more affordable and reliable. If you are a fan of the tweed, black and silver faced gems, you have to give Victoria a try. If you prefer something with a unique spin they make their own unique creations as well and they are all serious tone machines. In so far as tube amps go, these guys are definitely in my top five. Speaking of boutique, where is Carr?
It can get a bit difficult trying to properly depict certain aspects of effects pedals to our newer musicians out there since much of music tends to be described in an intangible sort of manner which relies heavily the assumption of prior knowledge and personal tastes which is why we try our best to not get the pros out there the meat of the information they are looking for, but describe it in a way that players of even entry levels can comprehend. So with that in mind, one of the more complex aspects of effects pedals for newer musicians is their implementation of a signal chain.
While an acoustic guitar's sound depends largely on the vibration of the guitar's body and the air inside it, the sound of an electric guitar depends largely on the signal from the pickups. The signal can be "shaped" on its path to the amplifier via a range of effect devices or circuits that modify the tone and characteristics of the signal. Amplifiers and speakers also add coloration to the final sound.