So far I’ve only tried this on breadboard, though I plan to deploy it in a new “parts” guitar I’m assembling. So far it sounds … really good. A lot like a ToneStyler, actually, but with fewer parts and handpicked values. The only tricky thing was finding a good pot value where all the action wasn’t bunched up at one end of the knob’s range. A reverse-log pot worked best for me—I got nice results with both a C500K and C1M.
I said to the guy who greeted me at the door: "I'm looking to my buy very first acoustic guitar." And felt a little nervous not knowing anything about playing. Handed him my note card of guitars and he led me into a practice room where he brought the guitars I was interested in and played them for me (since I had zerrrrrooo experience) so I could hear the tone of the guitars. He was very professional, and also took his time making sure that I picked a guitar that I liked. Even gave me a little history about where they are made and how the company sources their wood, etc. Very nice! I forgot his name, but he had curly blonde hair. (If you read this, Hi! And thank you).
This is a no brainer, but a value that must be considered before any purchase no less. As mentioned above, your abilities on the instrument will likely affect the price range you’re looking at, which may have an effect on the brands you shop within as a consequence. For instance, if you’re not looking to buy a high end guitar, you probably won’t even bother testing out a Gibson, as their guitars will likely be out of your range. The reverse is true as well, an experienced player on the market for high end tone probably won’t be satisfied by many of Yamaha’s offerings.
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones.
You may find a flood of several guitar brands in the Indian market. All of them claim to deliver the best products. Hence, it is a bit difficult for a newbie to choose the right one. That is why having prior background knowledge about all the brands is of utmost importance before you spend money on a guitar. Such know-how will help you to escape from the trap of words of mouth.
Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
The Gibson 2017 has a truly amazing setup and it played nicer and felt better than most models in its class. The tone is deep and throaty, and ab0ve all, it’s 100% Les Paul. What actually made the big difference in this electric guitar is the upgraded electronics and wirings with very minimal feedback and sustain. There is no buzzing or excessive string vibration. All that you get is a superb, perfect fit and finish.
Acoustic guitar is the first choice of many guitar beginners. There are a lot of benefits to start with an acoustic guitar. First of first, acoustic guitars are cheaper than electric guitars. Then acoustic guitars are easy to carry, you don’t need electricity and amplifiers. The most important reason I think is a good acoustic guitar make amazing sound that different from electric guitars.

Budget acoustics usually have a very high action (which may be possible for a good luthier to fix!), barre chords on acoustic guitar can be demanding and require good finger strength on a well set up guitar, on a budget thing with a high action it will be next to impossible! Cheaper acoustic guitars can be very hard to play higher up the fretboard because the strings are too far from the fretboard - if you find this, the truss rod (a thing inside the neck that controls how 'level' the neck is) can be adjusted by someone who knows what they're doing! If you can stretch to a mid-priced acoustic you should be able to get something suitable for a beginner.
Every guitarist seeks to produce an expressive and distinctive tone. Unfortunately, figuring out what kind of gear you need can be a baffling proposition. Here are the three main equipment categories that comprise your music-making rig: your electric guitar, guitar amps, and effects pedals and units. These components all work together to create your sound. And because you can swap out equipment and change settings, the creative possibilities are virtually limitless.
Rule 4 – Taking sound-making devices like stompbox pedals out of the equation, there’s an order to the way sounds naturally occur in physical space. For example, guitar amp distortion is made in physical space by turning an amp up enough to cause its circuits to overload, and any echo you might hear happens after the distorted sound hits walls or ceilings and bounces back to your ears. Therefore, logic says that your reverb and/or delay pedals should be last in the signal path, since that is how the sounds they produce actually occur in three-dimensional space.
So where do you start in a section as massive as this one? From acoustic to electric, nylon to steel stringed, hollow body to solid body, all styles are represented here, so having a good idea of what you're looking for will definitely help. The best place to start is usually with the brand, as each one has a reputation for something different, allowing you to narrow things down from there. For example, you'll instantly recognize names like Fender, Gibson and Ibanez as trailblazers of the electric guitar, while others like Martin, Taylor, and Breedlove are more famous for the unparalleled quality of their acoustic instruments. After that, you'll want to look at things like body type, tonewood, strings, size, orientation and performance level. Once you have a general idea about each of these, your decision gets that much easier. Just remember, it all comes down to personal preference, so as long as you're happy with the guitar you choose you can't go wrong. The guitar is a special instrument, with a different meaning to every player. Whether you're taking your first steps into the world of music or you're a professional rocking out in front of sold out stadiums all over the planet, strumming, plucking and picking on a guitar is a way to express yourself that can't be duplicated with anything else. So pick up a guitar here and start playing... you'll be glad you did.
The 85/15 “S” humbuckers here—again, they’re affordable versions of the Custom’s 85/15—are transparent, ‘hi-fi,’ articulate and high-output. Lush while clean and thick when clipped, the pickups have also been coil-split to take you into glassier, single-coil territory. However, you can’t coil-split them individually to form HS or SH combinations, for instance.

First, remove the knobs of the pots that you want to replace. Some knobs are held in by setscrews. Look around the shaft of the knob to see if there is a screw head then unscrew the screw and remove the knob. Most knob are mounted on split shaft pots. There are no setscrews on a split shaft pot. Friction and pressure hold the knobs on the shafts in this case. You can pull the knob directly off the shaft of the pot since there is no screw. If the knob is stuck on the shaft, I usually use heavy gauges guitar picks to try to pry up the knob. You may also wrap a thin rag around the bottom of the knob and pull the knob off the shaft. Regardless how you get the knob off, be careful not to dent or ruin the finish on the top of the guitar. It is easy to rip the knob off of the pot and accidentally drop it on the guitar. Once the knob is removed, you can unscrew and remove the nut on the top of the shaft.

Moreover, it can hand a wide range of musical styles and techniques. In most cases they're more popular with classic rock and blues fans, perhaps the Stevie Ray Vaughan or Eric Clapton enthusiast. However, there have been players over the years who have used Stratocasters in much heavier styles of music. Billy Corgan and Jim Root are just a couple that come to mind.
While Line 6 is probably the best known high-volume preset modeling amp brand, Peavey isn’t far behind – and truly rivals the offerings of Line 6, both in quality and quantity. What’s especially intriguing about this particular amp is that it allows you to choose not just the amp models and a wealth of applicable effects, but that it gives you the power to choose the type of instrument you’re plugging into it – thusly shaping the rest of the options accordingly. Whether you play guitar, acoustic guitar, or bass, this amp can change it sound to suit the instrument. And that’s a lot more than other competitors’ amps have to offer. It also features a tap tempo, USB connectivity, a headphone jack, and more.

In May 1965 Keith Richards used a Gibson Maestro FZ-1 Fuzz-Tone to record "(I Can't Get No) Satisfaction".[24] The song's success greatly boosted sales of the device, and all available stock sold out by the end of 1965.[25] Other early fuzzboxes include the Mosrite FuzzRITE and Arbiter Group Fuzz Face used by Jimi Hendrix,[26] the Electro-Harmonix Big Muff Pi used by Hendrix and Carlos Santana,[27] and the Vox Tone Bender used by Paul McCartney to play fuzz bass on "Think for Yourself" and other Beatles recordings.[28]

Guitar chords are usually represented by the name of the root note, and the scale it is based on, such as A Major, written as simply A. An A chord built on a minor scale is called A Minor, and written as Am. An A chord built with a 7th is called A7, and so on... Diagrams are used to show how the chord is actually to be played on the guitar, with finger positions mapped out. For a complete overview about chord structure, check this guitar chords formula chart.


The common design of a standalone stompbox is simple and, thus, hasn’t changed much: The guitar lead plugs into an input while a second lead carries the output to the amplifier. In between, a multitude of knobs, switches, and pedals modify the signal. To connect two or more boxes requires “jumper” leads, which chain the boxes together to complete a circuit of circuits, each one powered by a 9V battery. Typically, stompboxes are activated by “stomping” on an on/off bypass switch. This simple design enables tinkering: The exterior casing can be easily removed, exposing the interior for modification. To do so requires only a basic grasp of electronics, solder tools (or a solder-less breadboard circuit), and patience. Lots of patience.
I have to say I'm really impressed with the Obsidian HSS wiring harness, The build quality is top notch, and the simplicity to install really delivered.It only took a few minutes to connect and be up and running. I love to customise my guitars and love to play around, so having the ability to swap out pickups without a messy soldering iron is fantastic, and the wiring is super clean giving a professional finish. I'll be intending to use the obsidian wiring harness in future project guitars -I highly recommend- Guitar sounds great ( oh did I mention the extra guitars picks too. nice touch)" - Ricci Custom HSS Strat® Wiring

Yes, the Les Paul is a signature model for the late, great guitarist Les Paul.  This signature instrument is one of the few models to ever have other famous players have signature versions of their own.  The impact of the Les Paul has made it one of the most recognized instruments on the planet, due to its amazing versatility and high quality of craftsmanship.


Flanging is the strongest of the standard modulation effects. The feedback control increases the depth of the 'comb filtering' produced when a delayed signal is added back to itself. Because it is such a distinctive effect, it is best used sparingly, though it can also be used to process a reverb send to add a more subtle complexity to the reverbed sound.
At the top of the fingerboard, just below the headstock, is a slotted piece of material called the nut. The strings are routed through the slots in the nut and terminate at the bridge, located on the far end of the body. When the strings are plucked or strummed, they vibrate between the nut and the bridge. This vibration is where the sound of a guitar begins. How that vibration translates into sound depends on whether the guitar is acoustic or electric, as we’ll see in a moment.
Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All of our kits have a build difficulty rating to help you determine which kit is right for you.

On these guitar tracks, I did use a little bit of the 1176. I don’t overcompress on these tracks, I just basically want to get a little bit more sustain out of the notes, so I have it setup so that there’s plenty of attack that comes through. I’m not trying to control that so much as I am the sustain of the note, and get a little bit more length out of it, though I’m pretty gentle with that. Then it just goes into Pro Tools and I record it as is.
Since guitar players are automatically cool, that means cool guitar players are the coolest of the cool. In this issue, we exalt this elite class of cold—the players who even we would sell our wives and first born just to have some of their mojo rub off on us. Some of them are pioneers who paved a bold, daring path to define new styles of cool, while others are simply the kind of guitarists we want to be when we never grow up (which is part of being cool).
The best place to start is with a small tube amp. This kind of amp is far less forgiving, leaving you nowhere to hide. It sounds counter-intuitive, I know. You’re looking for the best choice and here I am telling you one that will make things more difficult. But think of it as tough love – forcing you to confront your technique and learn the right way to play a chord or scale progression.

In the late 50s, McCarty knew that Gibson was seen as a traditional company and began an effort to create more modern guitars. In 1961 the body design of the Les Paul was changed due to the demand for a double-cutaway body design.[17] The new body design then became known as the SG (for "solid guitar"), due to disapproval from Les Paul himself. The Les Paul returned to the Gibson catalog in 1968.
The more difficult nut to crack in emulating the full drive train of a modern guitar is the instrument itself. That breaks down into two categories -- acoustic and amplified. VSTs and the gear that emulate the performance logic and physics of a guitar can get close to an acceptable reproduction of acoustic instruments but that last mile will be a hard gap to close. That's because the resonate bodies of most instruments -- especially stringed instruments -- are shaped differently than speakers. The materials, the inertial matrix, they're just not the same. The resonance of a stringed instrument originates at a single point of impact with the string, much as a speaker's sound originates at a sort-of single magnetic point, but inertia carries the vibration of a bowed or plucked string through a 3D body to produce 3D acoustics that cannot be exactly matched with a forward facing speaker -- or by speakers facing front and back. Close, but no exact match. We might argue that speakers can render sounds closer than a human ear can detect, but nuanced vibrations picked up in the bones and fluids of the human body could arguably betray a difference.

Get a ruler (or straightedge if you want to be all fancy) that is at least as long as the neck, but not so long that it reaches all the way from the nut to the saddles (and watch it doesn’t lean on the pickups or pickup surrounds either). If you can’t get one between these lengths, and are willing to sacrifice a ruler, get one that’s too long and cut it to length. Alternatively, you can just cut a little out of one edge so that you can still make full use of the other edge of the ruler. Now lay the edge of the ruler along the frets (don’t rest it on top of the nut, saddles, pickups or pickup surrounds).
Another chord you come across every day, the E major chord is fairly straightforward to play. Make sure your first finger (holding down the first fret on the third string) is properly curled or the open second string won't ring properly. Strum all six strings. There are situations when it makes sense to reverse your second and third fingers when playing the E major chord. 
Anonymous, that's tough one. Usually, breaking the D string would be down to two things - a sharp edge on the saddle (unlikely if you're using a roller bridge) or your technique. The only other thing I can think of right now is the break angle (how sharply the strings pass over the saddle on the way to the tailpiece). Perhaps raising the tailpiece (or feeding the strings through from the front and then passing them over the tailpiece - you could do this second one with the D string only) might help.
These guys are the best in town! I had my Gretsch 6120 Upgraded with a new Pickup. They were quick and at a reasonable price. They do amazing work. They also have a great selection of guitars and Amps for sale. I highly recommend stopping by. If your looking for a new guitar for yourself or your kids they will help you find the perfect guitar for your price range. I highly recommend stopping by. They also do amp repair! Stop by and see for yourself.
Here we have old "3-hole" this is another great Japanese Vintage Guitar! this one is over 40 years old wow! ...its wonderfully aged woods contribute to its rich great sound... this example is one of the greatest Martin style Copies from one of the finest "law Suit" Acoustic instrument builders of Japan Yamaha Nippon Gakki...This model is the very popular FG-140 RED LABEL ....JUST IN!...so more info soon to come please see the detailed pics of this guitar for a link to many more pictures ( 40 ) or more from every angle Very good- excellent condition If your wondering why we call this one "3-hole" is because someone in its past life had an electric pickup of some type and it came to us with 3 tinny holes in the top... we have since filled the 3-tiny holes one on upper treble bout and 2 below the rosewood bridge... we filled & clear coated so its all solid and is very hard to see but are their also a fine hairline crack threw the finish exists at the bottom of the neck the original owner said its been their more than 20 years and has not changed and is solid...if wanted after sale for free at your request fill sand it and fill with lacquer and sand and buff smooth I expect that would do the trick to cosmetically improve the look of that but its really fine as is... What is rare about this oldie but goodie its all original and even has the original gold lined Yamaha logo Hard shell case in pretty respectable shape too...see the extra pics ( I will have a link to those pics posted later ) for those details... Great sound and pretty EZ to play too I just Cleaned it to remove the grime but leave all the original patina and also dehydrated the woods and she drank it up and after drying we finished it of with a fresh coat of wax finish was applied the woods still shine like a shinny new dime.. great old guitar.. JVG Rated in Very good Original Vintage condition with its share of natural play ware visible upon closest inspection of the neck width is 1-3/4 @ nut and the action is set good at 3-16ths @ 12th fret.. the fretboard and frets still playing well no need for a refret some fret indentations yes but its still plays just fine at 80+%, top has aged naturally with nice Patina now and has several fine finish cracks etc..same as a well loved and played 40+ year old Martin would have at several thousand dollars less than a 40+ year old martin. This guitar has been restrung with New Martin Marquis Strings and sounds great...This one you have the option of buying an original vintage Yamaha Hard Shell Case..these cases are rare and hard to find now the handle was warn and has a replacement quick fix and it works perfectly...just $69.00 additional .
Since 1998, many high-end US-made Fender Stratocasters such as the American Deluxe, American, Hot Rodded American, American Special and American Standard series came with an HSH pickup rout instead of a “swimming pool” (or “bath tub”) cavity to increase the total amount of wood that actually can resonate, producing a more complex tone. The HSH rout allows players to modify their pickups to the most often seen after-market configurations without re-routing or cutting into their guitar’s body, while maintaining more wood than a “swimming pool” rout.
Dorado is a line of Japanese made guitars imported and sold by Gretsch in the 70's. I am looking for a 5965 which is the smaller of the steel string line, had a sunburst finish, sealed tuning pegs and an adjustable bridge. The market worth is between one and two hundred dollars depending ....... Please post if anyone knows of a real good one with original case.

Some guitarists consider the notion of modifying an electric guitar from its stock configuration distasteful, while others consider it mandatory. As a custom builder with a decidedly vintage background, I fall somewhere in between. Generally, I’m most in favor of maximizing an instrument’s usability without jeopardizing the ability to return it to original condition.
If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
Well built, beautiful rich sound and stays tuned. Made in Canada by the Godin family. The slim neck and close action makes it easy to play for those with smaller hands. I have the black Songsmith and will never part with it. Many of my friends and family thought I had spent $1000 to $1500 for it and were really surprised at the price under $400. Godin makes a nice case for it and all of their guitars for around $120.00. Definitely should be in the top 10 of best acoustic guitars!

Compared to the guitar amp rankings, the bass amp list is largely dominated by heads rather than combos. Notably, many of the entries on this year's rankings come from the recent wave of ultra-portable, Class D bass amp—a topic we've covered before. Clearly, this subcategory of bass amp is dominating the market, and it's likely that there will be at least a few new entries under that heading at NAMM next month.
Without some kind of amplification, it would of course be possible to “hear” what you’re doing. That is something very different from never hearing what a particular electric guitar sounds like when amplified. In that case get an electric with a soundboard such as an archtop or ask yourself “why would I not amplify a device meant to be amplified through the guitar pickups?”

And therein is the VST guitar's edge, as it continues to improve in quality, not matching that of performances by the late Jimmy or the long-standing Carlos or whomever one adopts as their personal guitar deity, but bringing in new qualities of its own. In computer science terms, improved controllers are providing ever more interesting views of ever more detailed models to listeners attuned to the particular environment augmented by the virtual model. The guitar VST is not your daddy, but it might be the little sibling with your daddy's eyes. In the long run.. well... forget that. We love you pops. My little sisters, brothers and I hope you live forever, or at least as long was we do.

Ooooohhhhh.... I used the Firebird 12 for two weeks on sessions in 1973.... I STILL solo the tracks I used that on... it's the BEST BEST BEST BEST OF ALL TIME !!!!!!!! FOR ANYTHING !!!!..... in fact, as I remember, the octave strings were wound different than the way Ric does it (high-low) and that even added to the incredible sound.....wanna sell the Firebird 12?
A guitar recital may include a variety of works, e.g. works written originally for the lute or vihuela by composers such as John Dowland (b. England 1563) and Luis de Narváez (b. Spain c. 1500), and also music written for the harpsichord by Domenico Scarlatti (b. Italy 1685), for the baroque lute by Sylvius Leopold Weiss (b. Germany 1687), for the baroque guitar by Robert de Visée (b. France c. 1650) or even Spanish-flavored music written for the piano by Isaac Albéniz (b. Spain 1860) and Enrique Granados (b. Spain 1867). The most important composer who did not write for the guitar but whose music is often played on it is Johann Sebastian Bach (b. Germany 1685), whose baroque lute works have proved highly adaptable to the instrument.

As cool as these little amps are, they only have a fraction of the features you’ll find in their larger, more powerful big brothers. But, they are more than enough for a newbie to get started on, and they meet and exceed the criteria I outlined in the beginning as what to look for in a good starter amp: They sound good, they are flexible with good overdrive, multiple channels, solid EQ sections and some even have built-in effects.
The conservative way to tell if a Martin is built for steel strings is the bridge. If it's a style 18 or higher and has a belly bridge (and does not have 'banjo' tuners like early OM models), it's pretty much built for steel strings (can't use this indicator on style 17 and lower as these models never used a belly brige until the 1950s). Why? Since Martin didn't implement the belly bridge until late 1929, it's a very conservative indicator that the guitar is built for steel. The belly bridge was the last thing they did to make steel strings usable on their guitars (though certainly many models with rectangle bridges can handle steel strings too.) They started to implement the belly bridge in 1929, and all style 18 models and higher had the belly bridge by 1930. Therefore using the belly bridge as a steel string indicator is a very safe idea (assuming the bridge is original and it's not an OM). Now can steel strings be used on pre-1930 models with a pyramid or rectangle bridge? Maybe, but it's just not as definative and caution should be heeded ("silk and steel" strings would be a good and safe compromise). Note early OM models with banjo style tuners generally should be strung up 'lightly'.
If you're a beginner, you'll love an option like the Yamaha RBX170 Bass or the Epiphone Thunderbird IV Bass. These bass guitars offer great tone and style all at a price you can easily afford. Best of all, their durable construction will withstand all the paces an eager learner will put them through. Maybe you're already an established player and are looking for a new challenge? If that's the case, you'll love the American Deluxe Jazz Bass V 5-String Electric Bass from Fender. This beautiful five string is loaded with updated electronics and Noiseless pickups for a tight low-end response you're definitely going to appreciate. Its alder body helps to give it a wonderfully clear tone that any bassist will want to hear every time they strap in. You'll also find acoustic basses in this section such as the EAB Acoustic-Electric Bass from Dean and the stunning A5 Ultra Bass Fretless SA 5-String Acoustic-Electric Bass Guitar from Godin. These basses are perfect for performers who demand the ultimate versatility. It won't matter where you're gigging with these gorgeous basses, you'll have the freedom to play them acoustic or plug in for a louder sound that can fill larger venues. The bass has always been an unsung hero in popular music, but that doesn't mean it doesn't play a crucial note. With any of the top quality basses available here, you'll have no trouble keeping the band in the groove and having them sound tighter than ever before.

A Chorus effect can help you achieve lush, warm, and rich tones that work well during busier parts of a song. The effect attempts to simulate the sound of multiple performers playing the same part of a song at once. It works similarly to a flanger effect, where a sound is duplicated and slightly delayed. Choruses often use a longer delay than a flanger, and the delay time is also modulated with an oscillator to simulate the natural variations in time and pitch that will occur between several different performers.

Yes, the Les Paul is a signature model for the late, great guitarist Les Paul.  This signature instrument is one of the few models to ever have other famous players have signature versions of their own.  The impact of the Les Paul has made it one of the most recognized instruments on the planet, due to its amazing versatility and high quality of craftsmanship.


If you want to explore the two-channel tubes amps, start with Vox. The British brand is known for making workhorse amps that were used by classic rock’s best, and this small 15 watt option will give you all the tone is a small package that you can crank up in small spaces. Along with a simple set of controls, it features a by-passable effects loop for those players who are experimenting with different gear.

To THIS DAY, In My Life of being a Guitar-Player, I am Constantly STUNNED By The fact that SO many people-playing-guitar, know 'Diddly-Squat' about STRINGS.---When I Meet a New SOUL, Who Claims They are a Guitar-Player, Then When Asked 'What-Kind-of-Strings' do you Use,----I Get This 'Blank-Stare', which tells me Straight away They Don't even Know What-Size Shoe they Ware.----Very Strange.

{ "name": "Vintage Sunburst", "skuUrl":"/bass/epiphone-thunderbird-classic-iv-pro-electric-bass-guitar/h82691000002000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 549.00, "formatedIntegerValue": "549", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"36,16,7500006,36 Months Promotional Financing,10/28/2018,0% Interest for 36 months*. 36 equal monthly payments required. Valid through,549.0,false,/pages/Gear-Card-Rewards.gc", "msrp": 832.00, "salePrice": 549.00, "listPrice": 549.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuH82691000002000", "displaySku": "H82691 000002000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/H82691000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Thunderbird-Classic-IV-PRO-Electric-Bass-Guitar-Vintage-Sunburst/H82691000002000-00-140x140.jpg", "styleImgAlt": "Thunderbird Classic-IV PRO Electric Bass Guitar Vintage Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"4,392", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"345399726200", "restrictionType":"", "restrictionError":"" }
Sensitivity: Valve amplifiers (current drive) are sensitive to crossover resonances and speaker impedance variations. Quality speaker systems often used passive crossovers that were second-order, constant impedance, and critically aligned to avoid resonant effects. Some quality speakers had copper caped pole pieces, which helped damp impedance variations. Note:- With solid-state amps in voltage drive, power decreases as the speaker impedance rises. With valve amps in current drive, power increases as the speaker impedance rises. Therefore a flat speaker impedance is synonymous with a flat frequency response.
Compared to other plastic exterior multi-effects, the RP360 XP feels solid and durable. And this is reflected in many reviews, which mention the pedal's reliability as one of its good traits. Versatility and value for money also came up a number of times, both from pedalboard owners that have downsized, and beginners who are just trying out multi-effects.
For a relatively new band, Dream State have - in industry parlance - gained some serious frigging traction, playing Reading/Leeds last year, gobbling up streams in the millions and signing to hardcore label par excellence UNFD. Lead guitarist Aled does a deft line in a tapped arpeggio, while breakthrough single White Lies covers a hell of a lot of ground in its four minute runtime - combining Marmozets’ urgency in its opening and Deftones’ dynamics at the close. 
I have had Tracy do quite abit of work for me many times going back since the 90’s, however, now I am “on my own” living a long way from his shop. He is a super craftsman for sure and I wanted to watch how to do some minor things on my own as well as be able to help educate myself before finding someone locally to work on my guitars in the future. Great explanations and for my reference in future.
The neck's profile and width affects the guitar's playability and the player's comfort when fretting. While most necks are either "C"- or "U"-shaped, the width and depth of the neck in relation to the player's hand is an important consideration. Players with smaller hands should seek out narrower, shallower necks while those with larger hands will most likely find beefier neck profiles more comfortable.
Another thing that endears them to many guitarists is that they source 100% of their woods from sustainable sources and they use hydro-electric power. When it comes to the environmental footprint of a guitar, this is an area where Seagull are out in front and the big name brands, who while working hard to improve their own environmental impacts, are still playing some degree of catch-up.
In the ’66 American Teisco Del Rey Catalog, the small, humble EP-9T was left over from before (formerly EP-9), with the quasi-Gibson style head and triangular control plate. The only thing new was the Bigsby (thus the T). In the ’66 Japanese catalog, the small thinlines were represented by the EP-2L and EP-1L. The EP-2L looks for all the world like the EP-9T, with the large rectangular pickups with black inserts, controls on the triangular lower bout plate, and a long-armed trapeze vibrato with a curved handle. The EP-1L was the same except for having a single metal-covered pickup at the neck.
A frequency is determined normally by the position of a foot pedal. The input signal is boosted at, and around, this frequency, above the rest of the signal. As you move the pedal, the frequency being amplified changes up or down. The frequency range is set so that it sits well with a guitar, which in turn isn't hugely dissimilar to the human voice's frequency range.

For instance, during 1970s and early 1980s, Japanese manufacturer Tokai Gakki produced superb replicas of 1957–59 vintage Les Pauls, and replicas themselves were gradually highly regarded. In the 1980s, to respond to the high demand for vintage models, Gibson itself began to offer a line of “Custom Shop models”, almost accurate reproductions of early Les Paul crafted by the Gibson Guitar Custom Shops.
We're just over the £300 price tag here, but for the shredders and jazz fans out there, the Schecter C-6 Plus in Electric Magenta is a great option, whether you’re a beginner or pro player. It’s one of our favourite cheap electric guitars, and one hell of a performer, featuring professional level appointments inspired by Schecter's  Diamond Series guitars  – this is a monster of tone, and well worth the extra investment.
Repetitive open-tunings are used for two non-Spanish classical-guitars. For the English guitar the open chord is C major (C-E-G-C-E-G);[67] for the Russian guitar which has seven strings, G major (G-B-D-G-B-D-G).[68] Mixing a perfect fourth and a minor third along with a major third, these tunings are on-average major-thirds regular-tunings. While on-average major-thirds tunings are conventional open tunings, properly major-thirds tunings are unconventional open-tunings, because they have augmented triads as their open chords.[69]
Welcome to The Guitar Store, an owner operated store with big box selection and pro services. Offering expert amp and guitar repair. Do you like effect pedals? We have 9 cases full of over 400 different pedals to choose from. The largest stock of PRS, Fender, Mesa Boogie, Gretsch, Breedlove, Earthquaker, EVH, Strymon, Reverend and other guitar and amplifier brands in the northwest! We not only offer a diverse selection of high quality new and used guitars, but you can learn to play a ukulele, banjo, or mandolin here too. We have 5 teaching rooms with lessons daily. Check us out on social media outlets to find out about upcoming workshops and live in-store visits by local or national touring acts. We love what we do and it shows. Come on in today and get the help from professionals. You deserve it.
Remember that each cited Mark has many different models, some better than others. Above all, the definition of how good a brand or model will depend on the personal taste of its user. When it comes to music, there is a lot of controversy and discussion about what are the best tone, the best touch, and the most beautiful design, ultimately the perception of each person is different. We try here only give direction for those seeking to know good guitar brands. This list is not intended to be exclusive or limiting. Of course, the amount you are willing to pay too much regard to the definition of the right guitar. Soon we will be adding this list marks a bit cheaper and cost-effective. If you think we missed any brand that deserved appear here in the list, send your suggestion to onlineguitarlab@gmail.com.
If you're a fan of the Grateful Dead, check out the D'Angelico Premier Series DC Grateful Dead Semi-Hollow Electric Guitar. In the acoustic department, the Alvarez Artist Series AD60 dreadnought acoustic guitar comes highly rated, thanks to its hand-selected spruce top, mahogany back and sides, and powerful tone. Singer-songwriters and fans of acoustic-driven music must check out the latest Ed Sheeran Martin guitar, the comfortable, easy-to-play Divide Signature Edition Little Martin acoustic-electric.
The main purpose of the bridge on a classical guitar is to transfer the vibration from the strings to the soundboard, which vibrates the air inside of the guitar, thereby amplifying the sound produced by the strings. The bridge holds the strings in place on the body. Also, the position of the saddle, usually a strip of bone or plastic that supports the strings off the bridge, determines the distance to the nut (at the top of the fingerboard).

The classical guitar also became widely used in popular music and rock & roll in the 1960s after guitarist Mason Williams popularized the instrument in his instrumental hit Classical Gas. Guitarist Christopher Parkening is quoted in the book Classical Gas: The Music of Mason Williams as saying that it is the most requested guitar piece besides Malagueña and perhaps the best known instrumental guitar piece today. In the field of New Flamenco, the works and performances of Spanish composer and player Paco de Lucía are known worldwide.


Her dad was Broadway star John Raitt, but Bonnie's artistic parents were blues giants like Howlin' Wolf and Mississippi Fred McDowell, whom she met and performed with early in her career. She learned fast: Starting with her acoustic slide workout on 1971's "Walking Blues," Raitt rolled out a fearsome repertoire of blues licks, fingerpicking with the best and wielding a slide like an old master. Most of all, she set a crucial precedent: When guitar was still considered a man's game by many, Raitt busted down that barrier through sheer verve and skill.
{ "thumbImageID": "Limited-Edition-Les-Paul-Studio-Deluxe-Electric-Guitar-Wine-Red/581254000025000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Studio Deluxe Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Alpine White", "sku": "sku:site51275761455281", "price": "459.99", "regularPrice": "459.99", "msrpPrice": "665.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Studio-Deluxe-Electric-Guitar-Alpine-White-1275761455281.gc", "skuImageId": "Limited-Edition-Les-Paul-Studio-Deluxe-Electric-Guitar-Alpine-White/581254000026000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Studio-Deluxe-Electric-Guitar-Alpine-White/581254000026000-00-60x60.jpg", "imgAlt": "" } , { "name": "Wine Red", "sku": "sku:site51275761454949", "price": "349.99", "regularPrice": "399.00", "msrpPrice": "665.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Studio-Deluxe-Electric-Guitar-Wine-Red-1275761454949.gc", "skuImageId": "Limited-Edition-Les-Paul-Studio-Deluxe-Electric-Guitar-Wine-Red/581254000025000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Studio-Deluxe-Electric-Guitar-Wine-Red/581254000025000-00-60x60.jpg", "imgAlt": "" } ] }

This is an amazing 6 stringed electric guitar from Ibanez that is right handed and comes in a beautiful white color. The body is made from basswood  and kneck of rosewood. It is perfect for anyone to be his/her first guitar regardless of the music. Prices range from around INR 12,124  depending on the prevalent market factors such as whether there are offers or discounts available. You can find more details regarding this model by clicking on the link below:
Having a tuner on your pedal board is useful but these days I more often use a clip-on tuner, specifically the TC Electronic Polytune Clip (Buy at Amazon UK, Amazon US). I don't like the main signal to run through the tuner all the time if I can help it (I use the GigRig G2 switching system) but if you don't have that luxury, then look for a tuner with True Bypass like the TC Electronic Polytune 2 (Buy at Amazon UK, Amazon US) or use a Volume pedal that has a Tuner Output (many do these days!).
Martin began with a 000-size guitar, which had 12 frets clear of the body. They rejected the 27" scale idea, as this would have been impractical since the high string tension on a guitar would have made the instrument hard to play. Instead they used a 25.4" scale length. To accommodate Bechtel's request for 15 frets clear of the body, they squared the body's shoulders to add 1 5/16" to the clear part of the fingerboard. This allowed 14 frets clear of the body. Since they felt aesthetically the bridge should remain halfway between the center of the soundhole and the endblock, there really was no way to make the guitar have 15 frets clear. The bottom bout was reshaped slightly to match the new shape of the upper bout (note when the 000 went to 14 frets in 1934 it retained this initial OM body shape).
This is another classic in Fender's guitar roster. The Squier by Fender, Vintage Modified '51 is another example of how phenomenal Fender is as a company. This guitar is capable of producing versatile tones because of the SH pickup configuration and rotary pickup selector. The neck of this guitar is C-shaped which makes string bending easy as you like. This guitar has a strat body shape which adds to its cool, classic look.
Guitar technicians must be proficient in not only playing the guitar, but also in the construction of the instrument. They need to know how to repair and rebuild guitars from scratch as well as stringing and tuning the instruments. They need to understand how all the parts of the guitar interact to produce clear musical notes. This knowledge can be obtained through formal education, experience, working under a knowledgeable guitar tech or with other experienced musicians.

The Applause line is relevant because the technology used to make the aluminum and foam necks was subsequently applied to Ovation’s final American-made solidbodies, the Ultra Kaman or UK II, which was introduced in 1979. The UK II featured an aluminum frame with a urethane foam (Urelite) body, featuring the usual Ovation shape but with a little Tele-style curve on the upper shoulder and a sharp single cutaway. The top featured a contour like a carved top, although it was molded, of course. The neck was typically Ovation, with a bound 24-fret ebony fingerboard. Pickups had changed to twin-blade humbuckers, still in the smaller Ovation size. Electronics were fairly conventional, with a three-way select, two volume and two tone controls. No reference materials are available to me, but it appears that the earliest UK IIs had a little Les-Paul-style elevated pickguard and hollow bow-tie inlays. Also, the early UK IIs seem to have the plastic and metal bridge assemblies seen on earlier Preachers and Vipers. Later versions have the notched abalone block inlays, no pickguard and all-metal bridge assemblies. This is what makes me think the switch to metal bridges occurred in around 1980. As far as I know, the model name never appeared on the pickguard!


The guitar features hand-rubbed solid Sitka Spruce top supported by Martin's incredibly reliable mahogany HPL (high pressure laminate) back and sides, essentially similar to the configuration found on many of Martin's mid-priced acoustics. If you're looking for an affordable starting instrument that has big-brand backing, or you are looking to get into the parlor-style guitar trend, check out the LX1E Little Martin.

One reason why the sound changes in different parts of a given room is that sound reflecting from room boundaries reaches your recording microphone later than the sound travelling directly from the amp, causing phase cancellation — in effect a series of peaks and dips in the recorded frequency response, the spacing of which is related to the delay between the direct and reflected sounds. Keith Olsen suggests lifting and/or tilting the amp to minimise the effects of phase cancellation. "Leo Fender put those legs on the sides of a Fender Twin, and he did it so the guy in the orchestra could actually hear it when he was playing soft. But the other reason is that when you put a mic up against an amp tilted that way... you don't get phase-cancellation problems off the floor and wall. Let's take it one step farther. Let's lift that speaker cabinet off the floor and put it up on something that is stable enough to be able to give the speakers a platform to work from, but where... the reflected sound is going to be so far down in volume to the direct, it's of no real consequence... All these things start adding together into mic technique, stuff that you learn over years."

Overdrive pedals are intended to mimic the sweet sound of an overdriven tube amp. They are generally more subtle, warmer and a bit richer in sound. Overdrive pedals typically don’t produce the kind of heavy distortion needed in hard rock and heavy metal, but they are fantastic for blues, country, rock and anything else where you need warm, textured distortion. A good example of a quality overdrive pedal is the Ibanez Tube Screamer.

The Meisterklasse is a high-end harmonica on the modular system, made in Germany, featuring chrome-plated cover plates, an anodised aluminium comb, and extra thick 1.05mm nickel-plated reeds. One other feature that sets the Meisterklasse apart from most other Hohner harmonicas are its full-length cover plates, which extend all the way to the ends of the harmonica's comb rather than sharply angling down before the ends to form an adjoining surface parallel to the reedplates and comb. The only other Hohner harmonica possessing this quality is the curve-framed Golden Melody.[25]
The Effect: Vibrato effect, often mistaken for a tremolo, is the type of guitar effect that alters the pitch of your signal. The result is very similar to that which you get when you operate the tremolo bar on your guitar. There are different types of vibratos out there, but the most common division is between analog and digital units. Analog vibratos are known for their clarity and organic feel that comes from analog pitch shifting.

This is a Japanese Fender Jaguar electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This amp gives a really nice full clean sound. I have recorded it on the edge of break up so the low velocity samples come out clean and the high velocity samples come out with a bit of nataural power valve distortion. You can add more distortion with effects if you need it dirtier. It is hard to get this natural break up sound with effects which is why I have recorded it that way and if you add distortion it still has the natural bite of a valve amp (except with more distortion). This makes it very expressive just by the difference in tones at different played velocities. The lowest velocity is muted samples. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them. The sound is suited to a lot of types of music. These guitars have been used for all sorts of music over the years. It has not much sustain and makes a bright clean sound.
You can choose between tube amps, hybrids, or solid state models. The first are generally viewed as the grooviest. The latter are cheaper, more reliable, and require less maintenance. And the hybrids are often a practical compromise. (Keep in mind that watt for watt, tube amps are much louder than their solid state cousins with similar wattage ratings.)

There were differences between the pickups as well – the National had slanted units under enormous covers, while the Supro featured 8-string versions of the Alnico V pickups found on many Spanish-style guitars. The difference in tone proved to be minimal. The Supro has a more refined sound than its cheaper cousins with the famous string-through pickup, but it can still be raw and biting when required. Although it is a single-coil pickup, it has excellent hum rejection and sounds wonderful either overdriven or clean. The guitar has plenty of sustain and a surprising level of output, making it an excellent instrument for rock and roll as well as country music.
• Lighten Up: Typically, heavier strings project more natural sound when struck, but for most live performers it’s practical to have an acoustic guitar with a pick-up for plug-and-play situations. Having a pickup in an acoustic guitar allows for the use of lighter gauge strings. Some acoustic guitars even respond well to slinky electric sets, like .10s, providing electric-guitar-like playability without sacrificing the chime of acoustic tones.
Gretsch is one of the oldest manufacturers on this list. It was founded in 1883 in New York City by Friedrich Gretsch. He was an immigrant from Germany and was only 27 at the time he founded the company. Gretsch has a wide selection of both acoustic style and electric style guitars. They have models in just about everyone’s price range. You can buy a Gretsch for under $500 or over $2000. Their style is fairly unique. They have an almost “classical” look to them. Keep in mind that the older Gretsch guitars were not as consistent in quality as they are today. So if you’re looking to buy used, try to keep it so you’re buying guitars that are made semi-recently. On the other hand, you might get lucky and snag a great deal. As expected, their sound is excellent.

If you choose, every hole is drilled for each component, including neck, bridge, pickguard and strap button mounting holes. If you choose the optional snap together wiring, then no soldering is required; all electronics connect together with easy to attach connectors. We have done most of the hard work for you! The body needs finish sanding only but should require no filling.

Flawless build, the action is set up so well I don't see any need to tinker with anything. Pulled it out of the box, tuned it and strummed a few chords, then set it aside for 24 hours. Re-tuned it the next day and it has stayed in tune. I cannot find anything amiss or out of place on this one. Per the serial number, this is a 2015 Indonesian build. The wood is simply perfect in appearance and the tone is outstanding for a thinline. Yeah, I am happy with this one. Recommended.

If the LR Baggs Venue is a little too expensive for your taste, the Acoustimax Sonic Maximizer preamp from BBE gives you a lot of the same controls at less than half the price. Like the Venue, the Acoustimax is ideally designed for the gigging or studio acoustic guitar player who wants to have more control over their tone and be able to adjust for different rooms and environments. BBE delivers this control with a five-band EQ, as well as feedback and frequency dials.
Though, it is important to know that diving into the world of building your own guitar pedals requires a vast amount of knowledge. A person who builds DIY guitar pedals should have a rather keen understanding to circuit board electronics, because this will allow them to understand how exactly to put a guitar pedal together, as well as troubleshooting.
Due to the acoustic, aesthetic and processing properties (workability, finishing, joints) the wood and the ligno-cellulose composites are the most valued materials for the musical instruments' construction. The guitar is made up of a complex structure, formed by a vertical wall in a curve shape (technologically named "sides") and two faces made up of ligno-cellulose plates, so that it should... [Show full abstract]
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
So don't hesitate; your next multi effects pedals, rack-mounted units and accessories are probably waiting just a few clicks away. The only thing better than a board full of great pedals is one box that combines all those great pedals into a single convenient package - and once you've got that multi effects unit onstage with you, the possibilities are virtually endless for the personalized tones and unique sounds you'll be able to bring to every performance.
Rock’s ultimate minimalists, Earth reduced heavy-metal thunder to a blissful rumble in the clouds. Their pioneering 1993 drone suite Earth 2 — pulseless, fearless, relentless — was little more than Dylan Carlson’s guitar chugging away on a note or two for 73 monolithic minutes. Relieving metal and grunge from any pretense that wasn’t distortion, menace, or catharsis, Carlson found a headbanger/shoegazer home between the primal and the O)))therworldly.
At its core is a combination of solid spruce and maple, which gives it a subtly brighter tone when compared to conventional spruce and mahogany body acoustics. To retain as much of the guitar's acoustic body as possible, Epiphone equipped the Dove Pro with discrete Fishman electronics, with controls that are mounted on the underside of the sound hole.
Those of you familiar with Van William’s former bands Waters and Port O’Brien, will have suspicions about what to expect from the songwriter’s debut solo material: boisterous, vibrant hooks that are easy to swallow but gut you on their way back out.  His latest incarnation represents a bounce back after a period of personal tumult. Two parts power pop bombast, to one part Americana, William’s maturation as a songwriter and guitarist seems to have hit a new high water mark.

First up we have the most widely used and most useful pedal ever created – the Distortion pedal! If you’re wondering “What is a distortion pedal” the clue is in the name with how this pedal sounds. It basically takes your signal (the guitar) and distorts it, adding volume, crunch and sustain to your sound and is basically used as a contrast to the natural sound of your guitar. Often used in the chorus of some of your favourite songs.

I took the Gearank scores we have calculated for individual guitars for each brand and combined them using a weighted average to produce a rating for each brand. I can best explain this by saying if a hypothetical brand had 2 models and one of them had 99 rating sources and the other one only had a single rating source then the first model's ratings would contribute 99% of the final rating for the brand. An interesting statistic; we processed more than 17,000 sources for these calculations.

This is one of our favourite cheap electric guitars and it certainly doesn’t suck thanks to its Alder body, comfortable “C” shape neck, snappy maple fingerboard and two Vintage-Style Single-Coil Tele pickups to provide that awesome tele twang. If you’ve always wanted a Telecaster and are just starting out in the world of guitar, this is a dream beginner’s guitar that is budget friendly and still completely high quality.


The initial single-pickup production model appeared in 1950, and was called the Esquire. Fewer than fifty guitars were originally produced under that name, and most were replaced under warranty because of early manufacturing problems. In particular, the Esquire necks had notruss rod and many were replaced due to bent necks. Later in 1950, this single-pickup model was discontinued, and a two-pickup model was renamed the Broadcaster. From this point onwards all Fender necks incorporated truss rods. The Gretsch company, itself a manufacturer of hollowbody electric guitars (and now owned by Fender), claimed that “Broadcaster” violated the trademark for its Broadkaster line of drums, and as a newcomer to the industry, Fender decided to bend and changed the name to Telecaster, after the newly popular medium of television. (The guitars manufactured in the interim bore no name, and are now popularly called ‘Nocasters.’) The Esquire was reintroduced as a one-pickup Telecaster, at a lower price.


The Original Blackout humbuckers are designed to be everything metal, handling thick rhythm play and well-defined lead melodies at higher speeds. The tone has an almost shimmering quality, especially on a clean amp setting. The tone profile of both the neck and the bridge version of this pickup emphasize treble with a hollowed out mid-range that helps give you the best of searing leads and heavy power chords.
Upon starting the game and creating a new profile, Rocksmith 2014 asks you to assess your basic skill level so that it can tailor games and lessons to your specific ability. But it can also adapt on the fly based upon how well (or poorly) you handle a particular song, riff, or skill. That's key to Rocksmith's teaching prowess. And the feature immediately becomes clear when you select the Learn a Song mode, which allows the user to play through any one of the dozens of real licensed rocks songs included in the game.
Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst

A companion to the Spectrum 5 guitar was a solidbody bass version with the Spectrum 5 body shape. This was the Teisco EBX-200/Teisco Del Rey EBX-200 Super Deluxe Bass. It had two small pickups with two center half-slots and two sliding on/off switches, with volume and tone and was described in the U.S. catalog as having the 5-ply ebony neck. The neck had the three-and-one hooked head and an ebony board with dots, not the picks.

A guitar is a stringed instrument that has always been a favorite amongst musicians because it creates symphonic tones that foster creative expression. Guitars are available in a variety of make and brands. In India, the guitar is the most commonly played musical instrument. Since a good guitar lasts for more than a decade, it is important to keep a few things in mind when you are buying a guitar for the first time. There are different types of guitar that are available for buying.
If you feel that you must attempt a setup on your own, and you have a suitably worthless guitar to work with, then there are a few pieces of advice that you should know. When adjusting the truss rod on any guitar (this changes the bend or warp in the guitar neck) you want to move in small, one quarter or less turns. Over-tightening the truss rod will lead to a back-bend which can permanently destroy your guitar’s neck. Loosen the rod to bring it from this kind of a bend to flat. From there, you will want a slight amount of sag in the guitar neck to allow the strings room to vibrate. Intonation on an electric guitar is achieved by making sure that the pitch of the note when a string is struck open matches the pitch of the note as struck at the twelfth fret of that string (one octave higher). If the note at the twelfth fret is higher, the string should be slightly loosened at the bridge (achieved by moving the saddle towards the neck). The opposite is true for flat sounding notes at the twelfth fret. It is best to use a high quality tuner when intonating an electric guitar.
As the market for iOS devices and apps has grown, so has the availability of affordable stompboxes and processors that can store downloaded effects. Being able to sample, purchase, and download effects through an iOS app or digital download gives you access to a whole new palette of sounds. Though relatively new, in years to come this may well become the way in which most players will assemble their effects libraries.
They say the formula for how many guitars to own is n + 1, where n equals the current number of guitars you already own. Now that we know that you’ll be buying another guitar, I’ve put together a list of the top 15 acoustic guitars for under $500. A top 10 list just wasn’t going to cut it here, as there are so many great choices under $500. If $500 is too much to spend, check out my guide on the best beginner guitars that come in under $300.
During the 1960s, many musicians[who?] preferred Martin guitars built beforeWorld War II to more recent guitars of the same model. The pre-War guitars were believed[citation needed] to have internal bracing carved more skillfully than later instruments, producing better resonance, and tops made from Adirondack red spruce rather than Sitka spruce. Additionally, 1970s Martin dreadnoughts suffered from poor intonation in the higher registers[citation needed]. Some luthiers and repairmen[who?] attribute this to a gradual trend of misplacing the bridge on these guitars: the same jigs for bridge placement were used throughout the history of each model’s production. As the amount of production increased from the Martin factory, the jigs eroded, resulting in inaccurate bridge placement[citation needed]. This was eventually identified and corrected.
In Chicago in the sixties, "the rules had been laid down" for young, white blues bands, Mike Bloomfield told Rolling Stone in 1968. "You had to be as good as Otis Rush." That wasn't easy. A Mississippi native who moved to the Windy City in the late Forties, Rush was a fearsome electric guitarist – with a grittytreble tone and lacerating attack, like a gunslinging cross of Muddy Waters and B.B. King – as well as a knockout songwriter. Along with guitarists like Magic Sam and Buddy Guy, Rush helped create the more modernized, R&B-influenced approach to Chicago blues that came to be known as the West Side Sound. Rush's impact on later generations was enormous: His late-Fifties and early-Sixties singles were go-to covers for Led Zeppelin ("I Can't Quit You Baby"), John Mayall ("All Your Love [I Miss Loving]") and the J. Geils Band ("Homework"), while Stevie Ray Vaughan named his band after Rush's lethal '58 lament "Double Trouble."
Make sure to check out my other 100 guitars!!! shipping to the lower 48 states.I will not ship anywhere else,Make sure to check out my other 100 guitars at my ebay store "Axes Bold As Love Guitars". I have added a new part to my ending statement.I now recommend that all the guitars I sell be set up to your preferences. ALL GUITARS MAY REQUIRE SET UP!!! Players have such varied opinions that I no longer want to hear about it. Here is a very cool SX "Custom Shack Strat". The maple 21 fret neck is from a SX VTG Series and was removed from a brand new guitar.These are very nice necks. Zero fret wear . The very cool Gloss Sunburst body is an aftermarket Body made of very light and resonant Paulownia wood. It was new when I built this guitar,has no dings,or indentations,just light surface scratches.
While most instruments made by Harmony and Kay were much cheaper than Martins, Gibsons or Fenders, the upper-level, more elaborate ones actually cost more money than some lower-end and even mid-priced Gibsons and Martins. A top-of-the-line Harmony, Kay or Silvertone made by Harmony featured inlay, binding and multiple pickups, switches and knobs, and cost more than a Les Paul Junior or Special and in some cases fully as much as a Les Paul Standard. While one of these instruments in near-perfect condition today might fetch $1,000 or more, it certainly would not have been nearly as good an investment as spending less to buy a Les Paul Junior and sure enough not as good an investment as spending an equal amount to buy an original 1959 sunburst Les Paul Standard.
Engl is not particularly famous among US guitarists, and even veterans in the field might be unfamiliar with this hard-to-pronounce name. A good shorthand to give you an idea of what they’re about is to make a mental list of the features most readily associated with German products: good manufacturing quality, reliability, an adequate level of innovation (but only when needed) and higher than average performance.
For beginning electric guitarists—or experienced players who want something inexpensive and portable—we think the Fender Champion 20 is the ideal amplifier. We researched 24 models, then put the 10 most popular to the test for 20 hours with two professional instructors, a guitar student, and our Wirecutter West Coast musical instrument testing team. With a colossal variety of sounds, plus built-in effects and intuitive controls, the Fender Champion 20 was a nearly unanimous top pick.
Set-ups include diagnostics, redressing and buffing frets, cleaning fret board, tightening hardware, restring, adjusting nut slots, truss rod adjustment, balancing tremolo, adjusting action, setting intonation, checking electronics, adjusting pick ups, detail and cleaning. Electro/acoustics get balance of output, and archtops have bridge located and taped.
That is not always the case with acoustic electric ones, especially with piezoelectric pickups since they pump out a relatively high amplitude signal. All you really need is a small DI box that will attenuate the signal a little, and you plug the guitar straight into a mixer. Naturally, how good this is going to sound will depend on your guitar's preamp.

I own one of these that I found in the trash on the side of the road - I have to say it has a good bit of wear and looks like it might fall apart any second in blue with black and chrome hardware - you couldn't pay me to get rid of this thing. I love the way it sounds and plays - its the benchmark for me for all my other acoustics - I dig the sound of this beast. Been a total metal monster for an acoustic \m/>.<\m/
Here, the brighter/lower-value cap is engaged when the pot’s all the way up. As you roll it back, the larger cap is introduced, producing greater capacitance and a deeper treble cut. When you arrange caps in parallel, their total capacitance is the sum of their values. For example, I tried a .0047µF cap and a .047µF, so the minimum value is .0047µF (a very modest cut) and the maximum is approximately .052µF (a very dark tone).
The roots of effects pedal usage can be traced back to early into the history of the electric guitar, but two people immediately come to mind who really pushed its usage out there:  Roger Mayer and Jimi Hendrix.  We’ve come a long way since those early days and it’s easy to be overwhelmed by the insane amount of options out there.  From good old standbys to newer boutique options, it can be a chore to know what effects pedals could be right for you.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
While most beginner electric guitarists focus on the actual guitar when purchasing equipment, the amp actually plays a far larger role in the overall sound. The best made guitar in the world is not going to sound good through a cheap, poor quality amp. However, any decently made guitar can sound quite good when played through a good amp. So, a guitar amp should not be an afterthought purchase for a beginner.
Jackson is a well-known guitar manufacturing company that was set up in the year 1980. Jackson guitars are considered as among the best guitars on the planet. Their guitars are known for its slender and refined layouts. Jackson guitars are also popular for their typical pointed headstock. The Jackson JS32 Kelly RW is an electric guitar which has won the hearts of many owing to its stylish design and great sound quality. When it comes to the sound quality of the guitars, Jackson is the best guitar brand to have.
From the 1920s to the 1940s, upright bass players who wanted to strengthen the acoustic sound of their instrument had to use small portable PA systems or guitar amp combos designed for acoustic guitar or archtop guitars. Since these systems were not specifically designed to amplify bass instruments, it is unlikely they provided good low-frequency sound reproduction (particularly guitar amps, which are not designed to go down as low in pitch as the low E (41 Hz) and A (55 Hz) strings). In the early 1920s, it was very hard for an upright bass player (indeed for any musician) to find any amplifier and speaker system to make their instrument louder. The only speakers that could be bought during the early 1920s were "radio horns of limited frequency range and low acoustic output", and the cone speaker (which is widely used in modern-era amp cabinets), was not offered for sale until 1925. The first amplifiers and speakers were PA speaker setups; while an upright bassist could potentially have used one of these early PA systems, they could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
Typical modern Telecasters (such as the American Standard version) incorporate several details different from the classic form. They typically feature 22 frets (rather than 21) and truss rod adjustment is made at the headstock end, rather than the body end, which had required removal of the neck on the original (the Custom Shop Bajo Sexto Baritone Tele was the only Telecaster featuring a two-octave 24-fret neck). The 3-saddle bridge of the original has been replaced with a 6-saddle version, allowing independent length and height adjustment for each string. The long saddle bridge screws allow a wide range of saddle bridge positions for intonation tuning. The stamped metal bridge plate has been replaced with a plain, flat plate, and the bridge grounding cover (which, while helping with the shielding, impedes players who like to mute strings at the bridge with the side of the palm, and makes it impossible to pick near the saddles to produce the characteristic Telecaster ‘twang’) has been discontinued for most models. Also different from the original is the wiring: The 3-way toggle switch selects neck pickup only in the first position, neck and bridge pickups together in the second position, and bridge pickup only in the third position. The first knob adjusts the master volume; the second is a master tone control affecting all the pickups.
If you’re new to the world of guitar or bass, a looper pedal is a great way to hone your skills. A looper pedal is not an effect, but more a tool that allows you to record chord progressions, notes or riffs and then play it back through your amp. It’s ideal for playing a chord progression or rhythm section, looping it and then playing a lead line or riff over the top – like two guitars playing together.

Chords are an essential component of playing the guitar. When you first start out, it’s best to make a habit of learning one or two new chords a week, and with each chord you learn, practice playing it with the previous chords you’ve learned. Not only does this help you commit the chords to memory, it helps you learn how to move from chord to chord smoothly, so you can start applying your new chord vocabulary to playing actual songs. After all, isn’t that why we all start playing in the first place?


Lastly, if what you're really asking is "Can I play my electric guitar without making any noise that would bother my neighbors/housemates?" Many amps and all direct in setups will allow you play with headphones. I plug headphones in a small tube amp. The sound is quite nice. I find this setup allows me to experiment even more than usual since I am not self conscious about anyone hearing what I am playing. I've seen little tube amps for as little as about $125 that have headphone jacks. At that price don't expect Fender, Dr Z, Vox, Marshall or Mesa Boogie quality sound, but they get the job done of basic tube drive and bypass the loudspeaker by driving the headphones.
Phasers, also called phase shifters, duplicate the original waveform of a guitar’s output, and shift one wave out of phase with the other. They blend both waves together usually applying an oscillating circuit, resulting in the waves moving in and out of phase with each other creating spacey, “whooshing” effects. “Itchycoo Park” by the Small Faces was an early example of phase shifting in a recording. Eddie Van Halen and Queen’s Brian May often used phase effects in the 1970s and ‘80s.
{ "thumbImageID": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "defaultDisplayName": "Epiphone Les Paul Custom PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Alpine White", "sku": "sku:site51321473136588", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White-1321473136588.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51321473136458", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Ebony-1321473136458.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Ebony/H79039000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Custom-PRO-Electric-Guitar-Ebony/H79039000001000-00-60x60.jpg", "imgAlt": "" } ] }
The kind of interface that you want should connect to your PC and the DAW (digital audio workstation) software installed on it so that you can record your playing. The Guitarport didn’t allow for recording without buying additional software that cost as much as the device; the device is essentially obsolete now but still supported. Years later I upgraded to their Toneport UX2, meant for recording and DAW compatibility. The accompanying Podfarm 2 software is quite good. The UX1 costs half as much with the same software if you don’t want or need 2 inputs (microphone or instrument). Presonus sells an interface that is quite popular, for less than $99
What is electric guitar tone? Tone is the sound of your guitar. Listen to B.B. King. His tone is rich and thick. You know it when you hear it. A lot of guitar players use pedals and effects to create that tone. Some of you may not be able to afford all those fancy effects. The good news is, you can make use of your hands and the controls on your guitar to create a myriad of tonal possibilities. Robert shows you how to use these components in this electric guitar tone tips guide by showing you 3 incredibly useful and powerful tricks for tuning up your tone. Your volume and tone controls, your controls knobs, and the switch between your guitar pickups can be beneficial in providing lots of tone.
Their LP models have a "mahogany" body, and the binding is very thin so I think the maple top is just vaneer. I also noticed the headstocks were not the usual LP angle. In my opinion, Epiphone wins hand down. The Strat types don't look much better in my opinion, again, sharp fret ends and awful looking headstock and logo. If you see any of their relic jobs, you'll notice that they range from passable from a distance to hideous from any range. 

Acoustic and electric archtops are identical in design with the only difference being the addition of electro-magnetic pickups and pots. Archtops can either be full-bodied or thinline. The full-bodied archtop retains good volume and acoustic resonance when played unplugged though feedback may be an issue when amplified. The thinline body minimizes feedback by sacrificing acoustic volume and resonance.

A little lighter than the On-stage but equally sturdy is the Gator GFW, at only 8 lb of weight. This doesn’t mean it won’t be able to offer proper support to the heftiest amplifiers, however, since it is rated to hold as much as 176 lb before showing any signs of stress. At this capacity, most people would be able to use it as a chair without any worries.

Parts made for the Kay Vintage Reissues may not fit or lineup with the original and we do not guarantee that our part will fit your guitar. We do sell SELECTED parts and hard shell cases for the following: K161V Thin Twin, K775V Jazz II, K162V Pro Bass, K5970V Jazz Special Bass, K1700V Barney Kessel Pro, K6700V Barney Kessel Artist and K8700V Barney Kessel Jazz Special.

The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").

After reading through Teach Yourself to Play Guitar, my opinion is that if you are giving a guitar as a gift to someone, this might be an OK book to accompany that. If you wanted to spend a bit more, or are looking for a book for yourself, I would go with the 2nd book reviewed below, the Guitar for Dummies book. It has online video and audio demos, and hearing what you should be playing helps when learning music... 😉

Epiphone does a great job of making instruments for all levels of guitar players, especially those looking for affordable acoustic and electric instruments. Epiphone is owned by Gibson, and therefore can make official copies of Gibson guitars like the Les Paul, SG and Hummingbird. Many are good enough for pro players to use in the studio or onstage.


Yamaha is known for focusing, in modern years, on band instruments. But at one point in their tenure in the early 90s, they owned a good share of the student model market with their beautiful Pacifica line. Thankfully, in the past few years, they’ve reintroduced mass runs of this guitar, and it is a great option for a first-time guitar player. Why? Well if you ask any older player who once started on a Pacifica, most of them will tell you that they still have it in their collection somewhere, both for sentimental value, and because it’s built like a tank and plays well.

Taylor T5. Even the friend who bought it doesn't play it and it goes for around $2300. I was always looking for an acoustic that plays like an electric, so the T5 seemed optimal. It didn't play very well and I thought it sounded awful. Since it's got the Taylor bridge pickup in it, it sounds like a tinny can with a string until you EQ the fuck out of it. But for that kind of money, it should play and sound awesome (in my opinion), or come with indoor plumbing.

Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.
Fishing some thin wires through the jack holes from outside can work. I use stranded wire and strip the insulation from the end. I’ll divide the strands and wrap them around the pot shaft. It’s a delicate balance — you want enough ‘wrapping’ to grip the pot for pulling, but not enough to get in the way of getting the pot shaft through the mounting hole.
A tremolo pedal takes your signal and chops it up, making it sound like the volume is dropping and reappearing very quickly. Imagine what it would sound like whilst holding a note and turning the volume down on your amp and back up again and you’ll get the idea. A tremolo allows you to change the speed at which the volume drops happen and how severe the cut off is. You can have it set to completely cut your sound out or just gate it, which allows a certain amount of sound through at each interval. The BOSS TR2 Tremolo is one of our favourites here at PMT.
In January 1986, Gibson changed ownership and began manufacturing a range of varied Les Paul models to suit different user needs. The 1980s also saw the end to several design characteristics that were classic to the Les Paul, including the volute and maple neck. However, due to consumer demand, the Gibson Les Paul guitar is available today in an array of choices, ranging from guitars equipped with modern digital electronics to classic re-issue models built to match the look and specifications of the guitar’s earliest production runs from 1952 to 1960.

Any vibration we can hear as "sound" is composed of some distribution of overtones above the fundamental frequency. Overtones exist in a set fashion based on the physics of vibrating waves and the ratios between them. The only difference in tone between any instrument is caused by a different prominence and distribution of these overtones. When a string is plucked on an electric guitar the vibrations move into the body of the guitar as well. The resonant properties of the wood will cause some of these overtones to be "summed" and exaggerated while others will "cancel" to some degree. The vibrating string will be influenced, however slightly, by the vibration of the guitar, in turn changing the distribution of overtones on the vibrating string - essentially creating a feedback loop.
ESP LTDs are a ripoff. All the money goes into the finish and nothing else. Cheap hardware and poor electronics. All of the LTDs I've ever owned couldn't stay in tune worth a damn, have noisy, pop-y switches and crappy pots. I have the Viper 400, and it's an overrated turd. Luckily I got it for a steal. Thing can't stay in tune AT ALL. I will be replacing the alleged Grover tuners with real Grover lockers. That still doesn't solve the issues with the soft finish and ultra-noisy electronics. Plus it has a humpy neck, a cracking neck joint (like all of my LTD set-necks) and the frets were likely leveled by a monkey considering the quality.
This depends on personal preference; changing the order of drive pedals changes how they sound when used together. For instance, a clean boost placed before a heavy distortion or fuzz will result in a louder boosted signal hitting the heavier distortion circuit which in turn works that circuit harder and you get heavier distortion. If you place that clean boost after the heavy distortion, it will just make the original distorted sound louder. Experiment with different placement order and you will find your own preference.
If you want to invest in a guitar that replicates the famous ’70 guitars, look no further than the model offered by Fender Vintage. This product was designed to feature a basswood body that is a replica of the famous workhorse Fender guitars. Moreover, the device has a “C” shape neck that was constructed from maple, and that is said to be quite resistant.
Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.
Still in the ’64 line was the MJ-2L, pretty much unchanged, except for the new hooked headstock in later ’64. Given the evidence of Westheimer’s Kingstons, the MJ-1 and MJ-2 were probably still available. The BS-101 solidbody bass also remained, with the new, hooked three-and-one headstock. Also still in the line were the WGs, including the WG-2L, WG-3L and WG-4L. Many of these are found with the squarish Bizarro Strat head well into ’65, but they are also pictured in the ’64-65 catalog with the new, hooked four-and-two head, so expect to find either.
Lotus started with the elite league of Japanese craftsmen and initially made excellent Morris-branded guitars, but trying to keep up with the heavyweights such as Matsumoku Aria Pro II and Fuji-Gen Gakki Ibanez was difficult. Mismanagement and, especially, the inability to market their initial superb-quality guitars soon had Lotus' owners scrambling for cheaper labor, ending in India with poor quality and eventually no takers for their product, as Chinese and Indonesian guitar producers stepped up with instruments of comparable quality at similar prices.
Oh, did you say you like lots of switches and pickups and knobbies?  Hell, welcome to our club!  Yes, the Norma 421-4 was the proverbial “king” of the catalog from 1968 to around 1970.  Similar guitars were sold in Japan at this same time, mostly carrying the brand name Liberty.This model was sold alongside a 12 string (EG412-2T) with a tremolo(!!!!!), a bass (EG467-2B), and a two pickup version (EG450-2).  Reading the catalog from 1968 is a real trip!  Here’s the description of the 412-4:

I have many Behringer pedals.Used them gigging.Have had many people ( lots of musicians ) asking me what I am using to get my tone and effects .They are all surprised when I tell them Behringer pedals.And almost all say the same thing."aren't they made of plastic"? Yes they are made of plastic.But being someone who has worked in the plastics industr.for 25 + years I know Plastic can be very strong .I have done hundreds of gigs with these pedals and never had a problem.You would really have to jump ontop of these hard to damage them.And if you did that with the non plastic pedals I am sure you would also have a problem .That said.I have 5 fx600 pedals because I found a site selling them for $14.A super bargin for so much effect.As far as battery power nowadays batteries cost more than pedals so anyone ... full review

Another unusual bass amp is Ashdown's B-Social combo amp, which the company calls a "desktop amp".[10] The 75 watt combo amp has two 5" speakers, which provide stereo sound. While some keyboard amplifiers and electric guitar amplifiers provide stereo sound through two speakers, this is a rare feature on a bass amp. The B-Social provides Micro USB and Bluetooth 4.0 connections for hooking it up to a desktop computer. The amp is versatile enough to be used for playing bass, playing recorded music or streaming music as a home entertainment centre, or for amplifying video game sound effects.[11] The amp has a special socket for connecting amp and cabinet simulation and effects unit apps which can be downloaded on iPhones and iPads. The amp was called "B-Social" because it has a second input, so that a bassist can jam with another performer. The B-Social's USB audio interface can be connected to Digital Audio Workstations for sound recording.[12]
You should be aware of some drawbacks to using the 'free' sites over the licensed sites (or purchasing a book of official TAB). First, the versions of the songs at the free sites were created by folks who enjoy music and did their best to document how to play the song. It may not be correct. Second, even though these sites don't charge for access to the TAB, most are in the business of making money. You'll have to put up with advertisements, often including flashing banners and pop-up ads. Finally, the original artists do not get paid for these transcriptions. If you like what you find, you should follow-up by purchasing the official music from an licensed reseller.
It’s easy to remove your pickup or pickguard and slide some foam rubber behind the unit. Start with soft foam first, and then increase the density to find the difference you like. Conveniently, the gray foam used in aftermarket pickup packaging makes great damping material: It’s soft enough that you can double it up (see Fig. 1 and 2) to create more pressure on the pickup’s back plate, too. This is a relatively no-frills mod that requires minimal materials and tools.
If your audio track suffers from a lot of spill, or includes chords, the pitch correction may not work correctly. Where spill is loud enough to be audible, you'll hear this being modulated in pitch alongside the wanted part of the audio as it is corrected. As a rule, chords are ignored, so guitar solos, bowed stringed instruments and bass parts (including fretless) can be processed, and only single notes will be corrected.

Maton earned international renown for their superb acoustic and electric guitars and basses, which have been played by scores of famous performers from The Easybeats to The Wiggles.[1] George Harrison owned one of their MS500 models, which were introduced in 1957 and famed British session guitarist Big Jim Sullivan owned and used a Maton ‘Cello’ guitar for many years during the peak of his career, playing it on recordings with Sarah Vaughan, Sammy Davis, Jr., Johnny Keating and his Big Band and Neil Finn from Crowded House.
With 24 amp models including a digital chromatic tuner, 9 stomps boxes, 4 amps, 5 cabs, 3 mics, and 2 rack effects; AmpliTube Custom Shop is a great way to get your hands on IK Multimedia's great guitar simulation software. As the name suggests, in addition to the free units you can purchase more effects units from right inside the plugin to build your own custom guitar shop.
The Effect: Metal has become the prevalent genre when it comes to music that involves guitars. Dialing in a proper distortion can make or break the sound of your guitar as well as your entire band. Coincidentally, it’s so easy to go overboard with distortion, all while being certain you are on the right track. The very first step is to get a dist box that is suitable for metal. Something like Electro­Harmonix Metal Muff carries just enough punch to get the job done, but not enough to drown your tone completely with gain. You’ll find this to be a reoccurring theme with a number of great metal dist boxes. At the end of the day, it all comes down to your prowess and skill. Every good metal guitarist know that it’s all about the unity of equipment and knowledge. With that said, these pedals will get you started.

The Boss GT-1000 Guitar Effects Processor is by far the best multi-effects pedal that the team at Boss have ever come up with. This is jam-packed with the entire back catalogue of Boss stomp box effects as well as tones from the coveted "500" series Delay, Modulation and Reverb multi FX pedals. So, you have over 116 types of effects to create music with – making it a no-brainer for Boss fans in general and those who need a huge array of expertly crafted FX.

Been in my attic for 20 years...kinda dirty...Rare Vintage Electric Guitar that i have never found an exact pic of on the web...seems like a Teisco Del Rey,but looks earlier than the 60's models ive seen...obviously needs cleaning an repair...but man this thing is cool...a great restoration project...the only marking is the patent number 31-4127 on the truss rod cover...or a Norma or Guyatone version...or just hang it on your wall as a great conversation piece
You wouldn’t guess that this is a low-end electric acoustic, even on close inspection, because the build quality is superb. This translates to some great tone. While it might not have quite the same ring and sustain as an expensive model, only real audiophiles are likely to notice. You get a solid spruce top, good quality hardware, and Fishman electronics.
Hi Dan! Thanks for the kind words! As somewhat of a newbie, you may find a semi-hollow-body guitar more flexible and versatile, especially if you are still finding trying to figure out what genre you are going to focus on. If you are set on the hollow-body go for, but ,if you are on the fence, the versatility of the guitar is something to consider. Those are my thoughts. Good luck!

The first thing is to adjust height. If you have the first type, you will need a flathead screwdriver. The two posts holding the bridge have flat slotted heads showing at either end. You can turn these clockwise to lower the strings or counter-clockwise to raise them. Find the string height that suits you. For an electric guitar, it will be about 1/4" off of the neck or lower. Get the strings as low as you can for comfort, but be careful that your frets don't start buzzing or that the strings are not coming into contact with pickups or any other parts. If this happens, your strings are too low. If the bridge is the second type, you will need a very narrow Allen wrench to adjust the saddles; you will find the Allen heads on either side of the saddle top.
Joe Perry is the American distillation of the good-old Keith Richards/Jimmy Page recipe for sideman/lead guitarist cool. He’s got the look and the licks, and he’s maintained both over the course of three or four decades—despite all odds. Jagger and Richards are the Glimmer Twins, but Perry and Aerosmith singer Steven Tyler went down in history as the Toxic Twins.
Inspirational, motivational and light background tune with beautiful and atmospheric melody. Good production audio for the slideshow, presentation, youtube, advertising, business project, motivational and successful videos, inspiring moments, bright achievements, film scores. I used electric guitar, muted guitar, piano, staccato strings, bass, drums, Glock, bright pads.
Though some sophisticated processors combine pitch detection with pitch-shifting, to generate musically correct harmonies in user-defined keys, simple pitch-shifters always change the pitch by the same number of cents or semitones. In musical terms, that means that only the octaves, parallel fourths and fifths are very useful. Other intervals tend to sound discordant, as they don't follow the intervals dictated by typical musical scales.
So what is the point of getting a small guitar amp? I mean you can get a whole lot of sound out of a medium sized amp without all of the sound issues that the small amps have. And yeah they are more ungainly and harder to lug around, but at least they have the sound and power required to handle a live performance and even band practice. Plus you can turn down the sound and practice at home just as well, right?’
Finally, if you’ve been looking around at different instruments you may have noticed some really cheap guitars by brand names you’ve never heard of. I always recommend starting out on a quality guitar made by a company you can trust. However, I’m also not going to look down on anyone who has to get something less expensive because it is all they can afford.
Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used.
Two full steps down from Drop D. Utilized by bands such as A Day to Remember (on Mr Highway's Thinking About The End, Welcome To The Family, Violence (Enough is Enough), Life Lessons Learned the Hard Way and Sticks and Bricks), In Flames, Hostility, Issues, Static-X, Bring Me the Horizon (since Suicide Season), Hellyeah, Amaranthe, Breaking Benjamin (since Phobia), Parkway Drive, Otep, Spineshank, RED, Bury Your Dead, Eye Empire, Dirge Within, Remembering Never, and occasionally Chevelle, Darkest Hour, Evanescence, 9oz. of Nothing, and For the Fallen Dreams.
Combos or extension cabs with more than one speaker might present some phasing issues when miked at a distance. Such phasing is usually heard as softness/“hollowness”/lack of low-end punch in the recorded sound – a sort of “comb filter” EQ effect like you get from a phaser or a cocked wah pedal. Some mic placements using, for example, a 2×12 speaker cab will induce time differences between the waves from one speaker hitting the mic relative to those of the other, and possibly create frequency cancellations that are deleterious to guitar tone. Even when both speakers are of the same make and model, they are likely to perform slightly differently (thanks to subtle variables of the manufacturing process) and to present ever-so-slightly different resonant frequencies, efficiencies, basic tonalities, and so forth. For all of these reasons, extra care is required when placing a microphone at a distance from any multi-speaker cab (close-miking one of the other speakers will all but eliminate such issues, but also eliminates access to the great sounds of distant miking).
The Hal Leonard Bagpipe Method is designed for anyone just learning to play the Great Highland bagpipes. This comprehensive and easy-to-use beginner's guide serves as an introduction to the bagpipe chanter. The accompanying DVD includes video lessons with demonstrations of all the examples in the book! Lessons include: the practice chanter, the Great Highland Bagpipe scale, bagpipe notation, proper technique, grace-noting, embellishments, playing and practice tips, traditional tunes, buying a bagpipe, and much more!.
Focus on the new chords you have learned and get physically used to changing between these and other chords you've learned in previous sessions. This is where you can use a metronome or backing drums to develop your rhythm and timing around these chord fingerings. Try and strum a simple sequence using these chords. Create a simple 3-4 chord song. This is about putting the theory you have learned into context.
You can think of these as distortion pedals turned up to 11. Usually, a fuzz pedal comes in as an accent for solos and intros, since its effect is so strong that it could overpower the rest of the band otherwise. You can hear an example of fuzz in the classic recording of Jimi Hendrix playing The Star-Spangled Banner at Woodstock. This is a good type of pedal to try out as an introduction to more powerful effects.
Their selection these days is insane, especially since they target a lot of awesome smaller brands that NOBODY else in the area carries. I'm pretty sure this is the only place in town you can go to play the Reverend line, not to mention damn near every PRS model currently in production. The locally-made boutique stuff they stock is awesome too, and I would have never even known about it had it not been for the shop.
Even cheaper (abour $40) is the Behringer Guitar Link (review: Behringer Guitar Link UCG102 USB Interface Review). One nice thing is the long cord.. you can sit a ways away from your PC without needing an extender, and like the line 6, it’s also got a headphone output. They offer some guitar effects software as well, via download, and a basic DAW program. Worth checking out, as this does check every basic box for forty bucks. I have not used this, but I have used other Behringer audio interfaces. Cheap, basic, but they do include ASIO drivers (read ahead).
{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: music software","pageName":"[gc] shop: pro audio: music software","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: music software","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"music software","prop5":"[gc] shop: pro audio: music software","prop6":"[gc] shop: pro audio: music software","prop3":"[gc] shop: pro audio: music software","prop4":"[gc] shop: pro audio: music software","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
The 52-week part is an excellent way to motivate you to practice. The selection of licks is great too with several genres covered well. It provides info for setting your metronome to get the beat right too. They are challenging, especially when you play them at the recommended speed. The wide selection will give you plenty of choices even if you skip a genre.
“Take a humbucker wound with 42-gauge wire as a benchmark. With an Alnico II magnet, it would have a warm, soft bass response, a very sweet high end and a slightly pronounced mid- range. Alnico III, funnily enough, is not quite as strong as Alnico II. So, the highs tend to be more muted and rounded. Probably the best way to imagine the sound of Alnico III is to think of the early 1950s when this form of magnet was very common. Think of the sounds of the jazz and clean guitar tones from that time – that plummy roundness.
The Fretted Synth website has mysteriously disappeared (the likes of Native Instruments not happy that they’re giving away so much goodness for free??), so we’re linking to the Rekkerd page that still seems to host the plugins. FreeAmp3 really shouldn’t be free: it features masses of sound-shaping potential and the user interface looks great. If you just want one (free) VST guitar plugin, get this.
One of the first solid-body guitars was invented by Les Paul. Gibson did not present their Gibson Les Paul guitar prototypes to the public, as they did not believe the solid-body style would catch on. Another early solid-body Spanish style guitar, resembling what would become Gibson's Les Paul guitar a decade later, was developed in 1941 by O.W. Appleton, of Nogales, Arizona.[27] Appleton made contact with both Gibson and Fender but was unable to sell the idea behind his "App" guitar to either company.[28] In 1946, Merle Travis commissioned steel guitar builder Paul Bigsby to build him a solid-body Spanish-style electric.[29] Bigsby delivered the guitar in 1948. The first mass-produced solid-body guitar was Fender Esquire and Fender Broadcaster (later to become the Fender Telecaster), first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster.[30] Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and more comfortable ergonomics than other models.
×