Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
The 6260 will keep the high-gain crowd happy. The V22 will satisfy anyone looking for a tube combo for rock, blues or country music. The 1960 will meet the needs of players looking for a British-type overdrive, and the 333 will nail those scooped out metal tones you might be looking for. Bugera is definitely worth checking out for players on a budget, or guitarists just looking to build their collection of classic sounds.
Just so you know, if you’re not a big fan of black electric guitars, Davisson has rolled out several colors like blue, vintage sunburst, red and pink for you to choose from. My choice was classic black, though! Now, my first impression of the 39” guitar as I unpacked it, was of sheer wonder. I mean, it was really tough to visualize the sturdy construction in terms of the menial cost. Of course there are letdowns, such as the body that is made of basswood instead of maple (that is used in premium guitars), which gives you sort of a mediocre feel. Even the material used for crafting the chrome bridge, humbucker pickup, pickguard and strings, is pretty average. But if you look at the overall feel, design and ergonomics, this model definitely deserves a round of applause!
These days it’s hard to determine where Squier’s end and Fenders begin. Squier by Fender Classic Vibe 60’s SStratocaster is a perfect example of what we meant. It’s a well built guitar that brings admirable craftsmanship and a tone that is equally as good. To me, the difference between this model and a Mexican Strat was too small, which made me somewhat uncomfortable.

With 24 amp models including a digital chromatic tuner, 9 stomps boxes, 4 amps, 5 cabs, 3 mics, and 2 rack effects; AmpliTube Custom Shop is a great way to get your hands on IK Multimedia's great guitar simulation software. As the name suggests, in addition to the free units you can purchase more effects units from right inside the plugin to build your own custom guitar shop.

First of all we have to make special mention for the build quality of the RP500. It has a cast-metal chassis and vacuum-style footswitches like on an actual stompbox, and it just feels like it’s built better than any Line 6 or Boss multi-effect we’ve tried. On the rear of the RP500 you’ll find a ¼” input for your guitar, stereo output, headphones jack, AUX in, balanced XLR stereo out, and a USB port. A power supply is included, so points for DigiTech over Boss for doing users that courtesy. A look at the front panel layout reveals it’s pretty unique. It doesn’t have the side-by-side stompbox look we love so much in the Zoom G3X, it has fewer knobs than the Boss ME-80, and yet it looks more straightforward to use than the Line 6 POD HD500X. The dimensions and weight are almost exactly the same as the Boss ME-80 (about 20 inches wide, and weighs approximately 8 lbs).
Want to get a good impression of how the SJ 200 sounds? Well Dylan can show you how it strums, Emmylou how it picks, or listen to Pete Townshend thrashing nine bells out of his one on Pinball Wizard. You might also want to take in George Harrison’s Here Comes the Sun or anything by the Everly Brothers. As you'd expect, given the "reassuringly expensive" (i.e. enormous) price tag, the build quality throughout is faultless, superb. The first thing you notice when you sit down to play it is just how sweetly the neck sits in your hand and how easy it is to play. It’s a big lump of money, but when you buy the SJ 200 we guess you’re not just buying the guitar, you’re buying a piece of history.

Speaking of overdrive and distortion, I come from the slightly less-is-more school. I recently heard Eddie Van Halen say he likes to crank things until they’re ready to explode, and then backs them down just a hair. I dig that way of thinking, and it applies whether you get your distortion from a pedal, a cranked NMV (non-master-volume) amp, or an amp with a more modern preamp-gain circuit.
An amp head is an amplifier without the speakers. This is the type of amp that is most often used on stages of all sizes, from small clubs to huge stadiums. The reason is that amp heads tend to offer more power and can be hooked up to several different speaker cabinets. This allows you unrivalled power as well as the freedom to mix and match your favorite heads and speakers. Another plus is that they are much easier to carry around to gigs, especially if the venue has its own cabinet. The disadvantages of heads are that they are generally more expensive than a combo, while you will also have to factor in the cost of a speaker when purchasing one.
Reverb is a sound effect used both in music and audio engineering, which adds a spatial dimension to the original track. To put it into more simple terms, a reverb gives you an impression that the sound is originating in a large room. You are hearing the source sound but also its numerous iterations as it bounces off different surfaces. Reverb guitar effects pedals offer a simulation of this phenomenon.
Founded in 1902, Gibson began life producing mandolins and other instruments, before making hollow-body electric guitars in the thirties. Their first solid-body guitar came in 1952 – the Les Paul, which remains one of the most iconic guitars in the world. They are also well known for pioneering some classic guitar shapes such as the SG, the Explorer, and the Flying V. Used by everyone from James Hetfield to B.B. King, Gibson’s are manufactured in three American factories – two in Tennessee and one in Montana.
While tube technology is still considered state-of-the-art in countries where a potato is regarded as a square meal, these days solid-state and digital amps offer excellent tone for a lot fewer bucks, and with fewer maintenance headaches. However, tube tone is still considered the standard by many top players. Take a blind listening test, and let your ears be the judge.

As you know, like most guitars sporting more than a single pickup, your Strat lets you select any pickup by itself or choose certain dual-pickup combinations. The standard way to connect multiple pickups is to wire them in parallel. This generates the classic tone our ears know from countless records, when a guitarist uses the bridge and middle or middle and neck pickups in tandem (positions 2 and 4 on a normal 5-way Strat switch).

I bought my amp at my local music store. When I walked in, I told the sales person that I got my El Dorado and I wanted to buy an amp. I asked him if he would mind playing my guitar through the amps in my price range. He readily agreed because he is the person who found Big Lou Guitars on the internet after I tried every brand of electric guitar in the store and believed I needed a big nut guitar because my hands needed an action with more space between the frets and strings. He told me to bring it in when I got it because he wanted to try it. He plugged it in and went up, down, and across the fretboard playing riffs and chords. When he finished, he said “great action, I’m surprised – and the price!”

The truth is that I've never known what it's like to not want to play music of my own because I come from an Irish family that all played instruments. Luckily for me, my parents were very young when I was born -- they were like sixteen, seventeen -- and they were from a tradition of people playing instruments, accordions, pennywhistles, guitars, harmonicas and things like that -- cheap little instruments. But because they were young and moved over to Manchester, they liked rock and roll and pop music of the day.

Neutrik has been making superior electronic interconnection products since 1975, making them the logical choice to supply the performance safeguarding jack in Gibson’s 2008 Les Paul Standard. Like many Neutrik products, the jack in the 2008 Les Paul Standard is manufactured from strong, high-grade thermoplastics and housed in a rugged diecast nickel shell. A retention spring inside the jack ensures optimum grip on any guitar cable, thus avoiding the chance of lost connection.

Ten is not enough. If you are not here for the first time and you already checked our article on the top acoustic guitars and the recommended electric guitars you know how we roll.And if we are going to review a lot more than just 10, why not split them into proper categories that will help you choose what is working best for you. As it will take a lot of time to write all these for you, please be easy on us. For the people that do not want to waste that much time thought and just want a quick list with some great effects we prepared the comparison charted listed below:

After being branched into ESP-LTD designs, the company made its signature guitars accessible to the masses. This was done by launching these guitars with the affordable price range. The design of ESP-LTD guitars is quite similar to the typical ESP designs like the Eclipse. Its ESP-LTD EC-1000 is a fantastic guitar model for rock, with high-quality features. In fact, if you are looking for something that could substitute the Les Paul guitar, EC-1000 will be the right choice.
While often overlooked, the speakers are an amp’s most crucial component—they’re the last thing standing between all that electronic gobbledygook and the sound that reaches your ears (except for yo’ mama’s fist, but that’s another story). Different sized speakers have different tonal characteristics, and you should consider speaker sizes the same way you’d consider an amp’s wattage rating. Speakers are like booty—small ones are tighter and big ones have more bottom end. But like a pair of pants, cabinet design can shape bottom end as well. Which is why a closed-back 4x10 cabinet may put out more bass than a 15-inch speaker in an open-back cabinet.
The demand for amplified guitars began during the big band era; as orchestras increased in size, guitar players soon realized the necessity in guitar amplification & electrification.[14] The first electric guitars used in jazz were hollow archtop acoustic guitar bodies with electromagnetic transducers. Early electric guitar manufacturers include Rickenbacker in 1932; Dobro in 1933; National, AudioVox and Volu-tone in 1934; Vega, Epiphone (Electrophone and Electar), and Gibson in 1935 and many others by 1936.
Many people will say that Overdrive and Distortion pedals are basically the same thing: wrong! While the overdrive tends to add gain and texture to your clean tone, emulating a cranked amplifier, the distortion intentionally clips and distorts the waveform of the guitar signal. The effect of distortion pedal is much more audible and the resulting sound is harsher and louder, and sometimes completely different from the starting sound. Distortion pedals are perfect for rock and metal players, and represents a safe boat for guitarists that may feel the need to have a backup to their tube amplifier: a distortion pedal into the clean channel of a rented amplifier can save your gig! The ProCo Rat 2 is an instant classic, while the Electro Harmonix Metal Muff/Top Boost gives you some serious distortion with a top boost in single box. And for your über-metal needs, the Harley Benton Extreme Metal is here to help.
Two and a half steps down from standard tuning. Used in Swedish death metal by bands such as At The Gates, Dismember, Edge of Sanity, Entombed, Amon Amarth, and Arch Enemy (during the Johan Liiva era), as well as Fear Factory, Carcass, Type O Negative, Cathedral, Seventh Void, Fleshgod Apocalypse, Sepultura, Five Finger Death Punch, Soulfly, Within Temptation, Triptykon and guitarist Kirk Windstein of Crowbar and Kingdom of Sorrow.
I have had some dog bad guitars! You and every one passes up Rickenbacker. I just dumped mine, I had two in my life they are bad out dated guitars. I saw people come in a store to buy one, they play one with a great Fender amp and walk out with some other brand. You do not see and of the greats play them. The sounds of the 60's is not a Ricky. Look for them and you will only see old photo of Lennon play one, no solos!
We used to see and hear Al Di Meola performing his big instrumental hit "Mediterranean Sun Dance" either with unforgatable Paco de Lucia or with his band's members. This time he performed it in duet with Antonio Sánchez, young flamenco guitarist born in Madrid, nephew of Paco de Lucia and Ramón de Algeciras and cousin of J.M. Bandera, who spent four years touring the world...
Each Proto Pedal comes as an easy-to-assemble PTH soldering kit, and it’s up to you to solder it all together! Additionally, we highly recommend using the Proto Pedal Enclosure with this kit. It’s a standard-size cast aluminum box, which does double duty as an assembly jig to help get the jacks and switch aligned correctly. We did NOT include the enclosure with the Proto Pedal to help keep the kit affordable – and in case you already had an enclosure you wanted to use or create yourself.

Now, imagine having that same signal but with your guitar’s volume on its half way setting. That same degraded signal comes out even worse as it only had half of the voltage to work with from the get-go. In order to minimize the amount of signal loss, it is always suggested that the guitar’s volume is kept at its max setting and either manually adjust the output level from the amp or better yet, from a dedicated volume pedal, as is the choice for most professional musicians. A volume pedal in an effects chain will control the output volume of everything that is placed before it, so it’s pretty much almost always a good idea to place it at the end of the chain if it’s going to be your main form of overall volume control.
Here we have a well preserved vintage Hohner HW600n HW for Hohner Western Acoustic Dreadnought Martin D35 Style acoustic guitar. with a gorgeously grained THREE Piece Mahogany back and sides WoW its really a beauty. Workmanship Fit and finish quality is excellent this guitar is stunning, previously set up and is Great sounding in near mint like condition its from the late 80’s early 90’s D35 Look alike, Spruce top with Mahogany Neck and some of the absolutely highest grade Mahogany your going to see its flamed and figured and has fire and looks as if it could be Koa but listed as Mahogany at any rate this is one of the nicest models Hohner in this era truly a stunner,,, its in top structural shape as well its neck angle is excellent at 1-11/16ths at the nut its medium profile neck is very easily played and is a convertible c shape… We were impressed with her sound to with nice volume and a mature sounding tone. We think you’ll like this beautiful Vintage Hohner as well we believe this to be late 1980’s to early 90’s made in Korea and would fool any made in Japan fan for its fit and finish workmanship this is a good vintage guitar in its own right… no cracks no repairs no issues no excuses someone is going to have a smile on their face. any questions or to buy this guitar contact Joe at: JVGuitars@gmail.com .
Her dad was Broadway star John Raitt, but Bonnie's artistic parents were blues giants like Howlin' Wolf and Mississippi Fred McDowell, whom she met and performed with early in her career. She learned fast: Starting with her acoustic slide workout on 1971's "Walking Blues," Raitt rolled out a fearsome repertoire of blues licks, fingerpicking with the best and wielding a slide like an old master. Most of all, she set a crucial precedent: When guitar was still considered a man's game by many, Raitt busted down that barrier through sheer verve and skill.
First, you need to determine what type of guitar you have - acoustic nylon, acoustic steel string, or electric. You want to be sure to use the correct strings for your particular guitar. Acoustic guitars that require nylon strings, such as classical, flamenco and some folk guitars, generally have lighter tops, or soundboards, with less internal bracing than those found on steel-string acoustics, and stand the risk of serious damage if fitted with steel strings. Steel-string acoustics are designed to withstand the added stress that steel strings exert on the top, bridge, nut and neck, and won't sound very good with nylon strings, if they even fit. Electric guitar strings must be made of ferromagnetic metals like steel and nickel, so they can interact with the magnetic pickups, while acoustic-electric guitars typically use a different type of pickup which senses vibrations from the bridge, so acoustic strings may just have a steel core wound with a phosphor bronze alloy wrap for bright tone. Guitars with whammy bars might require a few extra steps to keep everything stable, so check your manufacturer's instructions or look for online videos.
The best advice any guitar player can give when it comes to figuring out which guitar to get is to buy the best model your money can afford. In most cases, this advice is rock solid. Even if you are a beginner who isn't sure whether or not you want to commit to playing guitar long term, you can always sell the guitar with a minimal loss, like a decent car versus a junker.  Think of it as an investment as long as you maintain and take care of it.
*When the item leaves our warehouse, they are generally shipped to EMS Worldwide Express Mail Service and it would usually take 7 – 10 days to United States. We ship our products from Mainland China where our manufacturing factory is located. We will inform you once your order has been shipped and we will be providing you with the tracking number so you can conveniently monitor the shipments progress on EMS Worldwide Express Mail Service website or SF Express and USPS and Parcel Force website.
Welcome to OvationGallery.com.  This is my personal website for displaying photos of my various Ovation guitars.  I have been a player and collector of these fine instruments for over 30 years.  Although I don't profess to be an expert on all things Ovation, I do have a passion for their artistic and sonic beauty which I hope you will share.  My collection is always evolving, at one point  numbering over 50 guitars.  At one time or another I've been lucky enough to own almost every type of Ovation and Adamas guitar as well as some one-of-a-kind and truly collectable specimens.  All of these guitars are wonderful and it is my pleasure to share them with you on this website.     Dave   
This guitar manufacturer started out as a parts supplier in the early 1970s. Atlansia didn't begin production of guitars under their badge until infamous engineer and designer Nobuaki Hayashi of Matsumoku fame became the company's president and chief designer in the late 1970s. Since then, Atlansia has continued to produce cutting-edge guitar designs in Nagano, Japan. The company did not make any other badged guitars other than namesake Atlansia.
as an old school country picker i prefer the fender tele for the crisp twangy sound and also the feel of the fingerboard. I find a strat to be poorly designed with the volume control badly in the way to say nothing about the clumsy tremelo arm. I have modified some strats and made them playable for my slyle.A humbucker in the neck position on a tele is rite sharp for the blues.As for gibson they make a fine instrument,just not my style.
Originally, a signal would be recorded to two tape machines simultaneously. The playback-head output from these two recorders was then mixed together onto a third recorder. In this form, minute differences in the motor speeds of each machine would result in a phasing effect when the signals were combined. The “flange” effect originated when an engineer would literally put a finger on the flange, or rim of one of the tape reels so that the machine was slowed down, slipping out of sync by tiny degrees. A listener would hear a “drainpipe” sweeping effect as shifting sum-and-difference harmonics were created. When the operator removed his finger the tape sped up again, making the effect sweep back in the other direction.” Famous tunes using flange effects are “Unchained” by Van Halen, “Spirit of Radio” by Rush and “Bold as Love” by Jimi Hendrix. The flange on “Bold as Love” is credited as being the first recorded use of the effect in stereo.
Whether you have your sights set on a dreadnought acoustic or a classic Squire Strat, the guitar value packages found here consist of everything a player needs to make their guitar learning experience an exciting and enjoyable one. From Fender, Dean and Alfred to Jasmine, Ibanez and Martin, all the big names are here. You'll have no problem finding the perfect guitar value package that pertains to your specific music tastes.
Look for additional symbols in the tab. As you can see in the example above, many tabs aren't just collections of lines and notes. Tabs use a wide variety of special symbols to tell you how to play the notes in the tab. Most symbols refer to specific playing techniques - to make a song sound as much like the recording as possible, pay attention to these special markings.
The Original Blackout humbuckers are designed to be everything metal, handling thick rhythm play and well-defined lead melodies at higher speeds. The tone has an almost shimmering quality, especially on a clean amp setting. The tone profile of both the neck and the bridge version of this pickup emphasize treble with a hollowed out mid-range that helps give you the best of searing leads and heavy power chords.

As a rule, acoustic guitars with laminated spruce tops do not have the same resonance as those made from unlaminated tonewoods, but the Fender FA-100’s fuller dreadnought design provides a richer tone than some customers may expect. If price is a consideration, the Fender has been described as a “cheaply made guitar with a fantastic sound.” What’s more, When you buy a Fender product, you're investing in quality. The Fender Musical Instruments Corporation has been manufacturing instruments and equipment since the 1940s.
All Vintage V6’s offer an extraordinarily high level of specification including the revered Wilkinson WVC original specification vibrato featuring authentic bent steel saddles for that classic sparkle and tone; precision machined pivot points for total ‘return to pitch’ accuracy and a stagger-drilled sustain block to prevent string hang-up. An adjustable, ‘vintage bend’ push-in arm completes this definitive vibrato system..
Woofer enclosures must be larger and more sturdily built than cabinets for mid-range or high-frequency (tweeter) speakers. As such, in the 1950s, when Ampeg introduced bass amplifier and speaker systems, bass guitarists began to use them. Similarly, Hammond organ players used a specialized keyboard combo amplifier, the Leslie speaker cabinet, which contains a woofer for the low frequencies and a horn for the high frequencies. The Leslie horns rotate and a baffle around the woofer rotates as well, producing a rich tremolo and chorus effect.

The guitar is also available in various packages with an amp and other accessories, such as this one that includes a Fender Frontman 10G amp, a cable, a strap, picks, and a tuner. Note, though, that Fender offers a truly awesome little amp with built-in effects, the Champion 20, for just a bit more. We strongly recommend spending a little extra and getting a Champion 20, which will give almost any guitarist practically any sound they can imagine with no need for effects pedals. Read more about the Champion 20 in our review of the best electric guitar amp for beginners.

First we look at the design of the guitar: How does it look? What is the paintwork like? Any outstanding graphics or colors? What wood is the body, neck, and fretboard made from? How many frets are there and what size are they? What is the scale length? It’s also worth noting that the design is the most personal of all the ratings. For example, some people will love ESP’s eye-meltingly unique George Lynch Signature Kamakazi, while others will pretty much hate it. So the design ratings are very subjective!
A soldering iron is basically a tool that allows you to transfer heat that in turn melts the solder which is used to join two pieces of metal. The heat is supplied electrically (this wasn’t always the case) and the soldering iron itself will have an insulated handle protecting you from the heat generated. For some useful tips on best practice for soldering click here: https://guitarkitworld.com/common-mistakes-to-avoid-when-building-an-electric-guitar-kit/
I dont know but im looking for a good bass guitar too. Depends on your price range. Personally I realy like Ibanez basses and think they do really good low to mid price range basses. If you are looking at a professional quality basses you should look at Rickenbacker, Musicman (stingray), Fender, Lakland and Shadowsky as they are the main brands for professional basses.
This cheap acoustic guitar is highly recommended for beginners on a budget. It continues to stand among the best selling acoustics, and many a young musician has had this as their first ever guitar. It features a familiar combination of spruce top, mahogany body and neck, and rosewood fretboard. The guitar's classic configuration and traditional dreadnought shape works well with almost any type of music, from folk to rock and everything else in between.

Yes, he wears a KFC bucket on his head and a Michael Myers mask on his face, but he's a genius. Buckethead (real name Brian Carroll) plays every style, from country to death metal. Albums like 'Monsters and Robots' and 'Population Override' are must-haves for any aspiring guitarists, and instrumentals like 'Nottingham Lace' and 'Too Many Humans' take some beating. - Floods

Dirk Wacker lives in Germany and is fascinated by anything related to old Fender guitars and amps. He plays country, rockabilly, and surf music in two bands, works regularly as a session musician for a local studio, and writes for several guitar mags. He’s also a hardcore guitar and amp DIY-er who runs an extensive website—singlecoil.com—on the subject.

Build Your Own Effect Pedal. Mammoth Electronics makes an effort to offer our customers a very neatly packaged and personally customizable effect pedal kit. Each guitar pedal kit comes equipped with everything you need to build your own effect pedal as quickly and inexpensively as possible without sacrificing quality. These DIY guitar pedals kits are designed to make building your own effect pedal easy for everyone from the hobby builder to the manufacturer. All parts are labeled and packaged in the kit for easy identification. Enclosures are fully customizable to the user specification and specially wrapped in a protective foam for safe transit. We’ve provided a wide selection for any effect pedal kit needs you might have. From a simple boost pedals, and fuzz pedals, as well as overdrive, distortion, and compression kits. We also have a wide range of modulation kits, including delay, reverb, tremolo, and phaser effect pedal kits. If you need a quick fix or a more complex guitar pedal kit, Mammoth Electronics offers a variety of options making it effortless to build your own effect pedal with a sound quality that will make an impression. We work hard to build relationships with only the best brands for our customers. These strong relationships allow us to provide extremely competitive pricing on all of our DIY guitar pedals kits.. We’re confident you will save yourself money & time if you build your own effect pedal with Mammoth Electronics. Mammoth Electronics offers customized DIY guitar kits and effect pedal kits that allow you to experiment with, create and amplify your own taste of music, without compromising on the sound quality. With added protective layering, these kits are safe for transportation and transit. We’re passionate about helping our customers build the best effect pedal possible so please Check out our Facebook page where you can provide feedback, share tips or ask any questions you might have about your latest projects.

Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]
The first great thing about this guitar is its amazing look. It has a Paulownia body with the metallic blue finish and a bolt-on construction. It comes with a dean vintage tremolo bridge which works quite well compared to others. One more advantage of this product is its cost. It is one of the most affordable electric guitars out there. It has a three-way toggle dual dean humbuckers which give you great volume and tone controls.

Yamaha’s also excel in terms of their playability, which is an especially important characteristic for beginners. Too many players sacrifice quality to save money on their first guitar, with the result being that they now have to deal with difficult playability that poses extra challenges to the learning process and can sour the learner’s experience with the new instrument. Yamaha offers an enticing balance between cost and quality.

Les Paul, the legend, designed this guitar. This guitar has had more widespread popularity than the Strat, IMO. Jimmy Page was a huge fan of the Les Paul and the SG. Gibson made the double neck SG on special request made by Jimmy Page which was featured in the song "Stairway to Heaven" in the concert at Madison Square garden. Jeff Beck and Pete Townshend are among other notable people who use the Gibson Les Paul.
My first recommendation is Epiphone. It is not just one of the best but it is the best guitar brand for beginners who are looking to buy a guitar to learn the ropes. I have included a few recommendations from this brand in this post. If you don’t know which one to buy and you are a beginner then buy one from this brand and you won’t go wrong for sure.
Thought you'd like to know. Before Christmas, I stopped by a local music shop to buy my 12 year old granddaughter a new guitar to replace an old Beaver Creek she'd been banging on for a few years. Since I'm an old folky from the 1960s, I thought a low end Gibson or Martin would give her both good sound and some bragging rights at her school's guitar club. The shop owner was in the acoustic guitar room strumming something I had never seen before and quickly told me I should forget Martin or Gibson and get what he was playing. It was a Seagull. An equal sound for half the price, he said, so I looked it over, strummed the few chords I could remember, and bought it on the spot. Later, I was still pondering how a little Canadian guitar could be called better than a Martin or Gibson when I found your ratings post. I do believe I kept repeating "Oh my God, it's true!" over and over. And she loves the guitar, especially the smaller neck and fuller sound. Thanks for helping this old folky who always thought Martin and Gibson were names to be spoken in hushed reverence believe in something new.
Most of the guitars, banjos and mandolins my customers use and collect have been made by major manufacturers such as Martin, Gibson and Fender or a few superb handcrafters such as D'Angelico and Stromberg, but over the years, by far the greatest number of instruments purchased in the USA and worldwide have been lower-priced student models. Prior to 1970 most student grade instruments sold in the USA were made here by companies such as Kay, Harmony and Regal in Chicago or Oscar Schmidt of Jersey City, New Jersey, and Danelectro of Neptune, New Jersey. When I started out playing and collecting guitars in the mid 1960s, brands such as Harmony, Kay, Stella, Silvertone and Danelectro were the standards for student use. We saw very few Oriental imports.
3) Had a little fret buzz on the high E but that was probably more my fault than anything else because I changed the light gauge strings to extra lights which sometimes requires the neck adjustment to be loosened. This guitar is set up from the factory with light gauge strings which means if you put on extra lights, the neck will have a tendency to straighten out too much which brings your strings closer to the frets and sometimes results in fret buzz. An easy fix though...just take a straight edge, like an aluminum yardstick, and lay on the neck, or hold down the string on the first and last fret and you should have just a slight space (approx. 1/64" - 1/32") between the frets and strings in the middle of your fret board. In other words, contrary to popular belief the neck is supposed to have an ever-so-slight dip in the middle and IS NOT supposed to be perfectly straight. My guitar required about a 3/4 turn (loosened) on the neck adjustment to fix the fret buzz. And, remember when adjusting the neck don't expect immediate results. Give the neck time to settle-in adjusting a little at a time and then waiting a couple hours or so before checking it again. If you still have fret buzz after adjusting the neck then it most likely will be at the nut because Yamaha keeps their action really low at the nut. If so, just take a piece of paper and put it under the string at the nut which should be an easy fix.
When you buy an acoustic guitar that you’re drawn to because of its aesthetics, you will become more motivated to play it. This is especially important for beginners who may find it tedious to do the same exercises over and over again, or who may be tempted to skip practice sessions. A good-looking guitar is something you will love playing again and again.
Considered by many to be the first master of the electric guitar, Charlie Christian was an unbelievable jazz player with stellar improvisational skills. His quick, fluent runs down the fretboard made for some of the most inventive and innovative jazz of all time. For a sample of Christian’s great guitar work, give a listen to his song, “Swing to Bop.”

Thank you Ola and David for this excellent article. The approach is totally scientific: you try to study the impact of one element of a system while keeping the rest of the settings identical (same pickups, same strings, same picking, etc.). The wood used modifies effectively the electrical spectrum composition and therefore the sound we hear. All the difficulty is that the wood is a part of a very complex system (woods combination, building type, pickups, strings, effects, amplification, restitution, etc.) and, without a solid knowledge or skills, it could be difficult to choose the right elements of the system to get what you want…

You will definitely want to start slow, with an almost completely dry signal, and start adding some reverb bit by bit. Depending on the type of music you are making, that subtle hint of reverb may be all it takes to get the point across and make that track sound more organic. If you want to take things a bit further, recording a completely dry track and then mixing it with the very same section with added reverb can yield some pretty interesting results. As you have probably noticed by now, experimentation is the key here. The most important thing is to start slow.

While musicians intentionally create or add distortion to electric instrument signals or vocals to create a musical effect, there are some musical styles and musical applications where as little distortion as possible is sought. When DJs are playing recorded music in a nightclub, they typically seek to reproduce the recordings with little or no distortion. In many musical styles, including pop music, country music and even genres where the electric guitars are almost always distorted, such as metal and hard rock, sound engineers usually take a number of steps to ensure that the vocals sounding through the sound reinforcement system are undistorted (the exception is the rare cases where distortion is purposely added to vocals in a song as a special effect).
Plugged into a Fender blue deluxe, this instrument immediately proved to be a love at first riff. The humbuckers sounds so amazingly, and coupled with great and rich percussive and natural full tone, that overall sound that emanates from this instrument is far beyond what is normally expected for a beginner’s piece. The fact that it is made in China has nothing to do with its quality. This might just be your favourite new ax.
Super nice !.... Beautiful Patina exceptional Booming sound much like the old Martin 000 or old Gibson for that matter for a fraction $ and this ONE is a really good one folks. These are a well kept secret sort of ... known for their GREAT rich mature sound. This example is in fine all-round Original condition without any of the over 60 group problematic issues- none found anywhere upon close examination, no NONE nada -- neck issues -frets ARE good - tuners ARE good - bridge IS good - Solid Top is without a crack it s wood is FREE of cracks, Back is OK no buckle rash , no buldge to its Spruce top, The bridge is tight and NEW MARTIN STRINGS and just JVGuitars Set up this baby plays and sounds amazing at this price point unbelievable! Made in Japan quality with a beautifully grained high grade Mahogany medium soft V NECK feels like an old Martin too ....looks at the neck grain they used a beautiful Honduran mahogany not African or other this one is cool See the Pics of that ...its original Tortious pickguard is nice too..... nearly 40 years old its amazing but she's not new or mint of course she has a few minor doinks and plenty of that natural vintage patina and such but overall she's JVG condition rated at vintage excellent used condition rated. She Plays with easily and will bring a warm smile to your face when playing GREAT TONE fingerpicking rich and punchy its a very fun guitar to play... she's over 45 years old and in this kind of condition..... you better snap this gem up before she's gone or I change my mine and keep her for myself...haha this is my business I need to sell but you get my point its a good one folks. This is one amongst several of the FG150's Red Label Nippon Gakki's we have and I call it ( # 3 ) Contact Joe by email to BUY it: JVGuitars@gmail.com.
I use an EBTECH HUM X. I plug my Fender ’62 Re-Issue Deluxe Reverb into the HUM X and then I plug the HUM X into the wall socket. It works great for me. For my pedals, I use a Visual Sound One Spot to power my large board with no issues and I have a Boss BCB-3 pedal board/case with OD-3, CH-1, DD-3, and a TU-2 next to the OD-3 on the floor since my BCB-3 is really old it came with a 4 pin daisy chain. I power that with a Boss PSA-120S AC Adapter also with no issues. I read about keeping your signal as clean as possible and cable lengths no longer than is necessary. I would try everything mentioned above and make sure you have good quality and proper length cables. BTW, if you research cables, you may find that more expensive doesn’t always mean better. Check out Pro-Co. They are also made in the USA. Good luck!
For a very good price, you get a solid spruce top, mahogany back and sides, and a rosewood fingerboard with matching bridge - for elegant finger picking. The bracing on the inside of the body is scalloped for even better tone, which works very nicely indeed. There’s also a System 66 preamp system with 3-band EQ and a builtin tuner for precision. It’s all good quality, mid-range equipment making this a really great value proposition.
The Univox/Aria Les Paul openly copied its American original, but would never be mistaken for it because it continued many characteristics typical of Japanese production at the time; a bolt-on neck with the usual narrow fingerboard, sitting relatively high on the body, zero frets, block inlays (with rounded corners) and rounded ends. The headstock was a copy of the Gibson open book. And, obviously, it didn’t have Gibson humbuckers, favoring instead a design with 12 adjustable poles in a metal cover with a narrow black insert slit in the middle, sitting on black surrounds. Controls were standard three-way with two volumes and tones. The knobs were those tall, skinny gold kind seen on many early Japanese copies. Hardware was gold-plated. These first Univox Les Paul copies survived into the early ’70s, but were probably gone by around ’74. By ’71, the model was called either the Mother or the R&B Guitar Outfit and was available in either black (U1982) or gold (U1983) finishes. Also by ’71, the Univox logo had changed from the early plastic version to the more common outlined block letter decal.
That said, information regarding Asian-guitar production from the 1970s and early 1980s is cloudy at best. Most lower-end Lotus-branded guitars were produced by either Samick or other factories in Korea or Indonesia. However, some of the higher-end Lotus instruments were built by the Cort factory in Korea or by one of three factories in Japan: Yamaki, Matsumoku, and Moridaira.
I believe its an 80's model it has some wear n tear but makes it look good and ventig. But there is nothing on it but the bently sign on the headstock.its jet black has a bridge not string through. Two hummbuckers I guess. A treble and rhythm switch up by the neck on the top. It is a 22 fret with pearl inlays. Someone shoot me an email n ill send picks of it. Just want to know what I got my hands on.
Epiphone's passion has always been about more than just making guitars. It has been about making music. It has been about understanding what is inside every musican that makes them want to, have to, express themselves. And understanding the myriad musical styles, where they are going and how they might develop. For over one hundred and twenty-five years they have continually looked for new and better ways to help players take their music farther.
Since we’re talking about acoustic-electric guitars that look as good as they sound, I’d be remiss to not add the Fender Tim Armstrong Hellcat to this list of top acoustic-electric guitars. Based on the infamous 1960’s acoustic played by the punk rock legend Tim Armstrong of Rancid, I could devote an entire article to the artful styling on this guitar, which is why it consistently ranks at the top of acoustic-electric guitar reviews by players of all levels.

If you plan to use your delay in conjunction with other stompboxes, it’s important to consider where to place these effects in the chain—especially if you’re using an overdrive, distortion, or fuzz pedal. The most common setup is to place dirt before delay. This is important because it means you’ll be delaying the distorted signal as opposed to distorting a delayed signal, which will sound mushy and indistinct. Because a distortion pedal has the strongest impact on your fundamental tone, it’s typically placed early in the chain, whereas delay is usually placed toward the end of the chain so it can produce repeats of all of the effects added to your guitar sound. Of course, you should experiment for yourself to see what you prefer.
Acoustic necks are usually listed as 12- or 14-fret necks. This number refers to the number of frets above the guitar body, not the total number of frets. On a 12-fret neck, the 13th and 14th frets will be on the body, and, thus, harder to reach than on a 14-fret neck, where they are extended beyond the guitar body. If you have small hands, look for an acoustic guitar with a smaller diameter neck.
{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: music software","pageName":"[gc] shop: pro audio: music software","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: music software","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"music software","prop5":"[gc] shop: pro audio: music software","prop6":"[gc] shop: pro audio: music software","prop3":"[gc] shop: pro audio: music software","prop4":"[gc] shop: pro audio: music software","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
The SG guitar kit while not as simple to assemble as an ST or TE (thanks to the pickguards or control plates being preloaded with electronics) is still a relatively straight forward guitar to assemble. This makes SG guitar kits a good option if this is your first building project and want to simply dip your toe in the water, to begin with before taking on something more challenging.

There are of course, other buttons and positions featured on guitars. BB king’s Lucille had a switch to toggle different values for R11 (thus going from moody chords to punchy ‘Lead’ with a finger and no need for extra gear). Advanced guitars may have phase and antiphase switches for humbuckers or dual pickups. The jackson 5 Telecaster I think is an example as it has both a phase and anti-phase wiring on their pickup selector.
Processing audio before it passes through an amp simulator is a creative alternative to adding effects to its output. As described elsewhere in this article, pitch-shifting can work well in conjunction with amp simulation, but other ways of editing and processing the raw guitar file before it goes through the amp modeller also yield interesting results. Reverse reverb, resonation, vocoding and Auto-Tune can all produce distinctive effects. Try chopping small sections of guitar out, for an interesting stuttering effect that's nothing like tremolo. A piece of guitar that's been reversed before being fed through an amp modeller sounds quite different to what you get by reversing a guitar part that's already been through an amp, and this technique can be very effective. Likewise, recording three or four separate tracks of single guitar notes and routing them simultaneously through the same guitar amp simulator sounds very different from playing chords. Sam Inglis
The V40 expands the elusive low-to-medium gain range, putting a wide spectrum of subtly shifting overdrive textures under your fingers. There are rotary controls for gain, EQ and master volume. The real fun starts with a two-position voice switch, which subtly changes the V40's character. Voice 1 is centred more on the early 60s 'blackface' tone; Voice 2 is edgier and a touch more aggressive, evoking the tweed amps of the 1950s. A small toggle switch called 'mid kick' adds a touch of extra gain in the midrange, not least to give weedy single coils a lift for solos. There's also a digital reverb with a front-panel level control and on/off switch. Then there's the standby switch, which has two 'on' positions for high power (approximately 40 watts) and low power (seven watts). This switch also works in the V40's single-ended mode, offering a choice of around 1.5 watts in the high-power position and 0.5 watts in the low-power setting. The V40's sonic palette made us sit up and take notice. By reducing the gain, all the mildly overdriven and chime effects normally squeezed into a fraction of the gain knob's travel now occupy the whole range. The V40 Duchess is a unique design - many of its competitors feature high-gain lead channels, teamed with high headroom and often uninspiring clean channels. By focusing on those often-overlooked but highly effective low-to-medium overdrive sounds, the V40 has effectively carved out its own niche, and looks set to become popular for blues, roots, jazz and country players.

The Yamaha Pacifica has long proved a benchmark for quality and specification, and the 112V remains one of the best electric guitars for beginners. The 112 is far from fancy and simply concentrates on the bare necessities. Yet the construction is of excellent quality. Trust us, if looked after this will be a guitar for life. By design it's an altogether more modern, brighter and lighter take on a hot-rod Strat. But when we say brighter that doesn't mean overly shrill. In fact the bridge humbucker will surprise some, it's beefy without being too mid-range heavy and although the coil-split proves a little bland played clean, with a distortion boost it's a pretty useful gnarly and wiry rhythm voice. It's good to have the choice too when mixed with the middle pickup - switching between the full and split coil here is subtle but, especially with cleaner 'class A' amp voicings, there's enough character difference to be useable. The solo single-coils impress - plenty of percussion and with a little mid-range beef added from the amp these get you to the correct Texas toneland. Neck and middle combined produces a fine modern Strat-like mix - the added brightness will cut through a multi-FX patch nicely.

The most common alloy (mixture of metals) used in pickups is alnico; this is a combination of aluminium, nickel, and cobalt. Alnico magnets were once the strongest known, but they have since been eclipsed by the rise of the rare earth magnets, which can also be used in pickups. Samarium cobalt magnets and neodymium boron iron magnets can also be used, although are perhaps less common. Additionally, ceramic magnets, based on iron oxide with strontium or barium carbonate, can be utilised.

I bought my 10 year old son a digitech RP355 multi effects pedal to use. It's cheap and simple to edit patches for different sounds and you can download patches to get the sound used in some popular songs but the thing I like best about it is the amplifier emulation. After using it for a while my son found he liked the sound of Vox amps so we bought a AC4 and it sounds great. I liked the fender deluxe and bassman amps so I had a deluxe amp circuit built by a local amp guy. Later on you will find that you want to move on to real pedals as they sound better so a multieffects pedal is a good way to sample a lot of different effects in one package. Most multi effect pedals have a sampling function so you can record a short song segment and then the unit will replay it while you solo along. Some also have the ability to record from an outside source and then play it back at slower speed so you can learn tricky licks. Lastly, most units have drum tracks which is a great way to play along and stay on time.
Replacing pickup rings and restoring covers. These rings are usually plastic and cannot be restored but covers are normally metal on Les Paul styles. You may not want to rub steel wool across your covers so follow the method of cleaning painted bridges to avoid unwanted scratches. Also, replace your pickup rings properly with rings that are the same length and/or color and make sure the screw holes do not need to be resized.
Whilst we’re on the subject of practice amps, we have to talk about the amazing BOSS Katana-Mini Guitar Amplifier. This little powerhouse of tone makes our best cheap amps that don’t suck list due to its immense sound, portability and inspiring tones within. Coming straight out of the acclaimed BOSS Katana series, the Katana-Mini uses the authentic multi-stage analog gain circuitry which allows you to select from three classic sound settings - Brown, Crunch, and Clean and enjoy a selection of fantastic sonic options. On top of that you have a classic 3 band EQ to dial in your perfect sound as well as an onboard tape-style delay.
The free GUITAR RIG 5 PLAYER is ready to rock right from the start: It offers a supreme selection of modular, high-class components, effects and routing tools, bundled as the free FACTORY SELECTION. For classic power and gain the Tube Compressor and Skreamer really come into their own, while a range of high-end effects such as the Studio Reverb and Delay Man can add that special touch. Choose from many Amp and Envelope modifiers as well as Routing Tools to further shape your sound to perfection.
When this guitar came in the headstock was completely broken off.  Being a 12 string I knew that it would need some extra reinforcement to stay structuraly sound.  I glued the headstock in place and then started to cut away wood from the truss rod to the edge of the neck running from the 5th fret to the A string tuner.  It took hours of cleaning up gluing surfaces and precisely fitting the graft before I could glue it in place.  I then repeated that step on the other side of the neck.  With this repair the only original wood remaing around the break is directly over the truss rods making the finished product basically as strong as a new neck.  Once the neck was refinished you cant even see the original break and only if you look very closely can you see the edges of the grafts.  When the owners of the guitar came to pick it up they thought I had made a whole new neck.  Needless to say they were very excited.  -Evan
This depends on a number of things. Are you looking for placement in a series of pedals? If so, it should go towards the end of your chain. Are you looking at it as a functional point? If so, using an octave lower can give some hugeness to heavy guitar or might pull a fatter sound out of some higher solos, whereas an octave up is almost always great for a layering effect.
Years of hard-earned success and fame have not changed his down-to-earth attitude. Even though he has become one of the world’s richest rock stars, he hasn’t married a supermodel or become a pompous art collector. Instead, he’s remained true to his working-class roots, spending his spare time building incredibly cool kustom cars and cruising the streets with his car club buddies, the Beatniks of Koolsville.
I know this is one of those questions where there's not any one single correct answer, but I'm curious what neck relief specs others are using for their SG? I've read enough articles on the web to acknowledge that there's clearly no consensus, as there probably shouldn't be, considering different playing style, string gauge selection, etc. Yet I still would be interest what others find useful as a starting point. Recognizing that neck relief is just one step (the first) during set-up. According to one useful article that I read (http://mysite.verizo...guitarsetup.htm), when the question was put to Gibson, their response was:
Chabot Guitars - Paul Chabot used to offer quality hand made Classical guitars (Colorado, USA) "Paul first apprenticed und er guitar maker / repairman Robert Buchanan, where he became familiar with the aspects of guitar repair, and guitar refinishing. Furthering his ability and knowledge, Paul attended Roberto-Venn School of Luthiery where he learned the basics of wood, instrument design and guitar making. Not long after graduating from Roberto-Venn, Paul was fortunate enough to apprentice under world renowned Master guitar maker Augustino Lo Prinzi. Through Augustino Lo Prinzi, Paul was able to learn some of the most proven methods and advanced techni ques of fine guitar making."
Kingston guitars were built in Japan and imported into the U.S. by Jack Westheimer, who was an early pioneer of importing and distributing Japanese instruments during the late 1950s and 1960s. At first, Kingston guitar models were limited to acoustics that were similar in style to Harmony’s Stella line. Westheimer’s electric line at the time was built in Japan by Teisco and branded as such before the name changed to Teisco Del Ray. By the mid-1960s, however, Westheimer was no longer importing Teisco (or Teisco Del Ray) guitars, and he turned his attention back to the Kingston trademark, but added electric guitars this time.
Nearly all Martin instruments come in different styles. The higher the style number, the more fancy (and collectible) the instrument. Again starting in October 1930, Martin stamped all flat top guitars with the style number, directly after the body size (and above the serial number). Style numbers can range from 15 to 45. A letter can follow the style number too, giving some additional info about the instrument. For example, a "T" after the style number indicates a Tenor guitar. See the general specs section for a full list of these suffixes.

Part of their Espana series, the Cordoba 45MR is handsome, handmade in Spain, and brings all the character of Spanish guitar music to the player, starting with the idea of using the guitars of the 1880s and 1890s as a model for the appearance and sound. Nylon-string guitars themselves came from Spain, so this is perfect for the player who wants as much connection to tradition and authenticity as possible.
In terms of the electronics, we are once more faced with a System 66 unit. You get a three-band EQ, a built-in tuner, and a versatile mid-range slider that allows you to really tune those mids to perfection. Overall, if you appreciate a comfortable guitar that sounds good and will take on any stage performance you can dish out, this Yamaha is something to look into.
Kadence is an Indian manufacturer of musical instruments. They provide high-quality guitars at affordable prices. The wide range of guitars offered by Kadence starts from low-budget Frontier series of Acoustic guitars. The Slowhand series of premium Acoustic guitars having superior sound high quality finish. Kadence has become a favourite and one of the best guitar brands in the Indian market with its good quality products. The great look and feel and available at affordable prices make these guitars invaluable.
But the question remains, was that environment good for the artists or for the equipment? Think of it this way: experienced chefs know very well the value of a seasoned pan or grill. Flip on any show from the Food Network and you’ll see cooks bragging about their 30-year-old griddle and how it imparts an amazing flavor to their corned beef hash. Preparing food leaves behind actual physical substances, unlike immaterial sound waves, so that comparison doesn’t work exactly. But the dirt and dust and grime could certainly effect the equipment. In a similar way, we have to ask ourselves, was that dirty studio, then, a source of inspiration or were the dirty, beer-smelling microphones actually improving the music? Regardless, the studio imbued the recording with an undeniable quality. Many guitar nuts can identify a particular instrument while listening to a song. Recording experts can do the same thing with studios.
Learning how to play guitar on an acoustic style guitar brings about the benefit of forcing you to learn better habits at the beginning rather than unlearning them later, which is exponentially harder to do, because they're a bit more unforgiving about hiding your errors, especially because you won't be hiding behind a string of distortion and reverb pedals.

Recently I was in the market for a low watt 1x12 amp. My local music store had a good selection. I grouped an old Vox AC15, Fender Deluxe, Orange, and a PV around me. I used a PRS Custom 22 to try them out. After about an hour I decided on the Fender. The sales guy suggested I try one more amp. It was an Egater Rebel 20 head with an Egnater 1x12 cab. My reaction was instant! If you have not played one of these you owe it to yourself to check them out! I bought it and also a Rebel 30 1x12 Combo a few weeks later! They SING!
The Squier Affinity series is a great beginner instrument. All of the bodies & necks have been CNC manufactured, so they are consistent and solidly built. In recent years, Fender has completely re-hauled the Squier series of instruments to make them decent introductory level instruments, at a great introductory cost to the beginner player. You can choose from Strats, Teles and even Jazzmaster style guitars!

{ "thumbImageID": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Purple-Phaze/J27936000005000", "defaultDisplayName": "Jackson Pro Soloist SL2Q MAH Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Purple Phaze", "sku": "sku:site51500000189830", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Purple-Phaze-1500000189830.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Purple-Phaze/J27936000005000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Purple-Phaze/J27936000005000-00-60x60.jpg", "imgAlt": "" } , { "name": "Northern Lights", "sku": "sku:site51500000189831", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Northern-Lights-1500000189831.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Northern-Lights/J27936000004000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Northern-Lights/J27936000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Transparent Magenta Burst", "sku": "sku:site51500000033868", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Magenta-Burst-1500000033868.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Magenta-Burst/J27936000003000", "brandName": "Jackson", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Magenta-Burst/J27936000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Alien Burst", "sku": "sku:site51500000033869", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Alien-Burst-1500000033869.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Alien-Burst/J27936000002000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Alien-Burst/J27936000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Transparent Blue", "sku": "sku:site51443624092615", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Blue-1443624092615.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Blue/J27936000001001", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Blue/J27936000001001-00-60x60.jpg", "imgAlt": "" } ] }

The descriptions that follow are very broad, but if you look around the guitar world you can usually pin any solid-body guitar down to one of these general categories. Of course you’ll see wild shapes like the Gibson Flying V, Ibanez Destroyer, Dean ML and Jackson Rhoads. They may look like they’re from another planet, but if you check their specs you’ll see they follow the same basic design principles as any other solid-body electric guitar.

Now, the body size isn’t the only thing to think about. There’s also whether or not there’s a cutaway, and how this is implemented. A cutaway makes it easier for you to access the higher frets, because you can place your hand right next to them. Naturally this will reduce some of the resonance because there’s less body beside the neck, but it’s a tradeoff that a great many guitarists are happy to make if they want to be able to play those higher frets well.

The irony with guitars is that an original 1950s Gibson, for example, whilst capable of producing the most amazing sounds, and playing like butter - may not stay in tune, or intonate quite as well as a modern day equivalent. Consequently old guitars have very often been 'upgraded', with original parts lost. But this can seriously down-grade their value. Replacing missing parts with original or period-correct ones can very much improve a guitars collectability, saleability and therefore value.
Octave effects take the input signal and produce synthesized tones that are one or more octaves above or below it. They can be blended in with the input signal to harmonize with it in real time. The effect can be synthesized by monitoring the waveform of the input and multiplying or dividing the observed frequency by, for example, 2 (to go up or down an octave) or 4 (to go up or down two octaves). This takes advantage of the fact that tones that are an octave apart have a 2:1 frequency relationship; the frequency of the tone one octave higher than a root tone is always double the frequency of the root tone.

Sennheiser's cardioid MD421 crops up almost as frequently in interviews, and has a wider frequency response, none of the low mid-range suckout, and an even heftier sensitivity boost upwards of 1kHz. This microphone also has a larger diaphragm than the SM57, and the off-axis response anomalies of the larger diaphragm, in particular, give a different character to the sound. Although obviously very popular, this mic seems more often to be used in combination with other mics than on its own.
To show you how to read the chords diagrams above, let's use the A chord as an example. For the purposes of chord diagrams, here is how your left-hand fingers are numbered. As you will notice, the index finger is denoted with number 1 the middle with 2 the ring finger with 3 and the pinky with 4. These numbers are used on the diagrams to show you what fingers use for pressing the frets composing the chords.
While the Boss MS-3 is a fairly recent release, it does have quite the number of reviews, most of them coming from users who have nothing but good things to say about their experience with the unit. One user summarized what most reviewers felt by saying that the MS-3 is a "game changer". But it's not just about its amp and effects switching, because many were just as impressed with the sound quality of many of its built-in effects, including its overdrive and modulation sections. It's compact and portable design is also very much appreciated, making it an easy addition to any setups.

Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.
Yamaha is one of those names that you don’t often see outside the realm of keyboards and digital pianos. While their footholds in fairly limited on the stringed instruments market, their quality is well known. Yamaha builds some of the most balanced and best performing electric guitars in their respective categories. That is simple the truth. Now, they might not be as popular as other brands, but that is a whole different story.
Everyone from Jazz guitarists to lovers of Queens of the Stone Age style heavy rock have fallen in love with the Artcore series since it was first introduced in 2002. Fusing expert workmanship with affordability, the Ibanez 2017 Artcore AS53 Semi-Acoustic Guitar, Transparent Black Flat is one of the best cheap electric guitars you’ll find on the market today. It’s budget friendly price tag makes it a fantastic choice for beginners whilst the high-quality pickups and superb tonewoods are the reason why so many pro level players will choose it for the stage and studio.
Originality of an instrument is very important. Modifications (any modifications), are a bad thing in the eyes of a collector. This will greatly influence value. Modifications can often be determined by looking at the model specs for a particular year guitar in this web page, and compare to your instrument. On flat top martins, the most common modifications are a replaced bridge, replaced tuners, or replaced frets.
Our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod. You may bring your brand new guitar in your Local Guitar Shop for proper setup and adjustment of the truss rod.
For his work on Supernatural, Glenn Kolotkin turned to elaborate multi-miking as a way of managing Carlos Santana's complicated setup. "I used multiple microphones on Carlos' guitars: Electrovoice RE20s close, Neumann U47s further away, an SM56, U87s. He was playing through an assortment of amplifiers at the same time, and by using multiple microphones I was able to get just the right blend."

In the Beatles' early days, George Harrison briefly billed himself as Carl Harrison in honor of his quick-picking hero. Perkins' bright, trebly style – which the rockabilly king picked up from blues players in Tennessee – defined the singles he put out on Sun Records ("Blue Suede Shoes," "Glad All Over") and influenced scores of players from Eric Clapton to John Fogerty. "He took country picking into the rock world," Tom Petty has said. "If you want to play Fifties rock & roll, you can either play like Chuck Berry, or you can play like Carl Perkins."
Also shown in ’60s Bizarre Guitars, but not in the Teisco book photo, is a ca. 1954 Hawaiian Teisco EG-R which was sort of shaped like a Gibson and which had the same pickup as the J-1, with more elaborate symmetrical metal rocket shapes on the sides, housing the volume and tone controls. A chrome dome sat in front of the pickup between it and the dot-inlaid fingerboard. The head was stubby and rectangular. This was very “Moderne” looking, very Buck Rodgers.
Tube or solid-state? One has the nice warm vintage tone, but the other is just so much simpler and free of hassle. Vox make one of the best hybrid amps, which heats up your guitar signal with a proper 12AX7 tube in the preamp before it becomes amplified by conventional transistors to deliver up to 30 Watts. A warm tone with smooth overdrive, but without the aggravation.
Some guitarists consider the notion of modifying an electric guitar from its stock configuration distasteful, while others consider it mandatory. As a custom builder with a decidedly vintage background, I fall somewhere in between. Generally, I’m most in favor of maximizing an instrument’s usability without jeopardizing the ability to return it to original condition.
The smallest bass amps, which typically have 10 to 20 watts of power and a small 6.5" or 8" speaker, are known as practice amps. They amplify the instrument enough for individual practice in a small room, such as a bedroom. Practice amps do not typically produce enough volume or low-frequency sound reproduction to be used in a band rehearsal or show. As such, they are mostly used by beginners or, when used by professionals, for warm-up or individual practice. They are more likely than full-size combo amp cabinets to have an open-back design, like an electric guitar combo amp. The use of an open back cabinet in small practice amps makes these models different from most bass combo amps and speaker cabs, which are closed-back (often with bass reflex ports or vents, or less commonly, with passive radiator speakers, both of which are designed to boost the low-frequency response). Some buskers playing on the street for tips may use battery-powered practice amps, a feature available on some models.
{ "thumbImageID": "RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst/J55980000002000", "defaultDisplayName": "Ibanez RGA series RGAR42MFMT Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Flat Dragon Eye Burst", "sku": "sku:site51500000051296", "price": "349.99", "regularPrice": "499.99", "msrpPrice": "688.88", "priceVisibility": "1", "skuUrl": "/Ibanez/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst-1500000051296.gc", "skuImageId": "RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst/J55980000002000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst/J55980000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Flat Blue Lagoon Burst", "sku": "sku:site51500000051295", "price": "349.99", "regularPrice": "499.99", "msrpPrice": "688.88", "priceVisibility": "1", "skuUrl": "/Ibanez/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Blue-Lagoon-Burst-1500000051295.gc", "skuImageId": "RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Blue-Lagoon-Burst/J55980000001000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Blue-Lagoon-Burst/J55980000001000-00-60x60.jpg", "imgAlt": "" } ] }
Tom Petty's lead guitarist for more than 40 years, Mike Campbell never clutters up a song with notes when two or three bull's-eyes will suffice. "It's a challenge to make your statement in a short amount of time," he has said, "but I prefer that challenge as opposed to just stretching out." Listen to the skeletal hook that holds "Breakdown" together or the laconic, tone-bending solo in "You Got Lucky" to hear Campbell's ingenious use of negative space. "Michael is not one to show off," Petty once said. "What he says is essential."
If you’re reading this guide, you probably need help purchasing a first acoustic guitar or electric guitar for yourself, a friend or a child. We're here to help you understand the key specifications and features to look out for. We'll explain the differences between acoustic, acoustic-electric and electric guitars. We'll also recommended six of our best beginner guitars and two beginner guitar value packs. 
Under the ’38 Avalon Hawaiian was a Supro Electric Hawaiian Guitar. This had a similar shape but was covered in “radiant crystal silver.” This was not pearloid, as is often assumed, but rather a silver paint (possibly a Duco leftover from the aluminum steels) with a crystalline additive similar to that used on Duolian finishes. The head was slightly rounded. The fingerboard was black. A handrest covered the pickup/tailpiece assembly. One volume control sat on a square plate on the treble side, reminiscent of the previously mentioned Supro Hawaiian Model in the ’38 Sorkin and ’39 Grossman books. This cost $30.

This is a great DVD, and Keith's style is very laid back, and easy to listen to. You can't help but like the guy, and once you start watching the DVD, you don't want to stop. He is extremely knowledgable, and it is like having an instructor right there with you. The DVD begins with the very basics, and works up to some quite complicated playing, so there would be something in this for everyone, from complete beginners (like me) to those looking for more challenges with their playing. For the price, I don't think you can go wrong.

What can you expect from a shop whose exterior is painted in Eddie Van Halen stripes? Everything! Their selection of pedals was astounding. One of the largest selections I've come across in any store. I left having bought about a dozen things. Dangerous place! They are obviously a big dealer in PRS guitars because they had a nice selection of the USA made guitars. The Guitar Store represents Seattle right with an awesome staff and a vast selection of great guitars. With an ongoing series of in-store events and appearances by notable musicians, there is always a reason to stop in. Last year the shop hosted a monthly "build your own pedal" workshop--how cool is that?
With that in mind, we would like to preface this article with the statement that a certain body style doesn’t necessarily mean that the guitar will be a good fit for the genre it’s associated with. However, we have also included some info on pickups. With knowledge on how the combination of pickups and a guitar’s body style impacts your end tone you should be ready to start shopping!
Frets are positioned proportionally to scale length—the shorter the scale length, the closer the fret spacing. Opinions vary regarding the effect of scale length on tone and feel. Popular opinion holds that longer scale length contributes to greater amplitude. Reports of playing feel are greatly complicated by the many factors involved in this perception. String gauge and design, neck construction and relief, guitar setup, playing style and other factors contribute to the subjective impression of playability or feel.