In March 2008, Vox unveiled the semi-hollow Vox Virage DC (double cutaway) and SC (single cutaway) at the NAMM show. Notable characteristics include a 3D contoured ergonomic design which not only had an arch top, but also bent back from the neck toward the base of the guitar hugging the player's body. The guitar body was milled from a single block of wood and had a fitted face in combinations of mahogany and ash. A new triple coil pick-up system designed by DiMarzio called the Three-90 emulates a humbucker, P-90, or single-coil tone.
You should be aware of some drawbacks to using the 'free' sites over the licensed sites (or purchasing a book of official TAB). First, the versions of the songs at the free sites were created by folks who enjoy music and did their best to document how to play the song. It may not be correct. Second, even though these sites don't charge for access to the TAB, most are in the business of making money. You'll have to put up with advertisements, often including flashing banners and pop-up ads. Finally, the original artists do not get paid for these transcriptions. If you like what you find, you should follow-up by purchasing the official music from an licensed reseller.
Since 1998, many high-end US-made Fender Stratocasters such as the American Deluxe, American, Hot Rodded American, American Special and American Standard series came with an HSH pickup rout instead of a “swimming pool” (or “bath tub”) cavity to increase the total amount of wood that actually can resonate, producing a more complex tone. The HSH rout allows players to modify their pickups to the most often seen after-market configurations without re-routing or cutting into their guitar’s body, while maintaining more wood than a “swimming pool” rout.
Ideally, a steel string acoustic guitar or an electric guitar would be the best for you if you want to learn to play blues and classic rock. Classical guitar because of its nylon strings and its warm tone is best played by fingers. If you need help in what kind of guitar to buy, check out our article on different kinds of guitars available for beginners, this might help:
The arched top Strats all had maple necks, rosewood ‘boards, black hardware, Floyd Rose licensed locking vibrato systems, and slight finish variations. The SSL-1 had a single humbucker with a volume control that had a push-pull coil tap. This could be had in metallic black, purple burst, white pearl, red pearl, and pink fire. The neck on the early SSL-1 is described in different sources as having a stain finish or as having an oil finish; there’s probably a clue to dating sequence here, but I don’t know the answer.
Control knobs and buttons are typically on the front of the cabinet or chassis, though in some cases, the knobs are on a recessed panel at the back of the top of the amplifier. The most basic amps only have a few knobs, which typically control volume, bass and treble. More expensive amps may have a number of knobs that control pre-amp volume (or "gain"), distortion or overdrive, volume, bass, mid and treble, and reverb. Some older amps (and their re-issued versions) have a knob that controls a vibrato or tremolo effect. The 1/4" input jack is typically mounted on the front of the amplifier. In the simplest, least expensive amplifiers, this 1/4" jack is the only jack on the amplifier.
To fulfill the diverse requirement of our esteemed clients, we are engaged in offering them a wide range of Electric Spanish Guitar. This offered range of Electric Spanish Guitar is available with us in various shapes and size and can also be modified as per our clients requirement. Our clients highly appreciate our offered Electric Spanish Guitar for its

I have my El Maya EM 1300 ( El Maya Japan, Kobe instruments) since 1989 but it was built during the end of 1982 and EL Maya Strat version, guitars are neck trough body, amazing instruments they are better then any guitars i ever played maybe I'm not objective , only my US Hamer is close or on that level. Does Anybody have any El Maya? and that you maybe wish to sell it? More over what are the fer prices for the almost mint state of those guitars, regards miki.
FYI, Dave might be backed up due to demand if he is still working, so I'd call those places up and ask them in advance. Twin Town isn't too bad a drive if you've got a car, maybe 15 minutes from Bloomington, but the place up in Fridley is about a 20-25 minute drive. They might be the best at working on short notice though as they're a smaller place. Definitely give them all calls.
Ampeg was swallowed up by Japanese electrical giant Magnavox in 1971, when they wanted to get in on the electric guitar copy craze of the 1970s. Magnavox produced electric and bass guitars under the Stud badge as well as the successful Ampeg brand. It's been suggested that Magnavox was also responsible for producing Selmer acoustic guitar badges during this time, but that has not been verified. Selmer was sold to Magnavox around the same time they bought Ampeg, so it certainly seems plausible they could have made Selmer acoustic badged guitars as an offering for that market. Stud badged guitars were made until '75, with Ampeg guitar production continuing until 1980. Opus was another badge made by the company. Magnavox lost their interest in Ampeg shortly thereafter and the brand languished until it was resurrected over a decade later by another American company.
In January 1986, Gibson changed ownership and began manufacturing a range of varied Les Paul models to suit different user needs. The 1980s also saw the end to several design characteristics that were classic to the Les Paul, including the volute and maple neck. However, due to consumer demand, the Gibson Les Paul guitar is available today in an array of choices, ranging from guitars equipped with modern digital electronics to classic re-issue models built to match the look and specifications of the guitar’s earliest production runs from 1952 to 1960.
Distortion – A dynamic effect that sounds like your guitar is being played through a loud, distorted amplifier. This can range from a slight crunch to a full-on metal distortion. The first distortion tones boosted the gain of an amplifier’s pre amp to the point where the guitar signal begins to “clip”. This clipping changes the harmonic structure of the guitar sound and the additional overtones heard as distortion. Connecting distortion pedals to the “front” of the pre-amplifier helps create the break up sound before it reaches the power amp.
Schecter is a really great guitar brand. When I was looking for my electric I searched through many guitar brands most of which are on this list and the only one that really felt right in my hands was the Schecter I play. Its got awesome tone quality, gorgeous body design and fret inlay along with very nice balance and it will stay relatively in tune for up to a few days at a time without the pegs slipping. Great for metal and rock and even really lots of other genres as well. Performs very well it should be at least top 5 if not top 3.
The tone knob is similar. Like the volume knob, the more you turn down the knob, the more of the sound you contain instead of sending it through the amplifier. But there is an additional trick involved. See, the current generated from each string is quite complex, like the sound characteristics it produces. Think of it like a continuum. On one end, the current is turned into low frequency sound (which makes the guitar sound 'warm') and on the other end of the continuum, the current generates high frequency sound (which makes the guitar sound 'bright').

The four-string guitar is better known as the tenor guitar. One of its best-known players was Tiny Grimes, who played on 52nd Street with the beboppers and played a major role in the Prestige Blues Swingers. Multi-instrumentalist Warren Ellis (musician) of Dirty Three and Nick Cave and the Bad Seeds is a contemporary player who includes a tenor guitar in his repertoire.
I just want to say I completely agree with the assesment of getting a non-shit Fender strat vs a Squire to begin with. I was on one of these cheapos and a 15w marshall amp for way too long. I became decent at playing, but in the end I didn’t feel inspired to keep playing. I recently bought a Maton MS503 Classic and a Fender Blues Deville 410 and playing that setup was like my body was on fucking fire. I wish I’d had more of that feeling sooner in my life. Those $200 for a squire goes a couple of years, but a $600 strat or other great guitar can go a lifetime. Amp matters heaps too of course.

Hal Leonard's series of books may be more responsible than any other series of books for people learning the guitar. It may be an understatement to call it a standard for students starting to learn the guitar. This book covers introductory topics like how to read music, chords, different scales and keys. Beyond that, it moves into advanced techniques and music theory in later books. The book is available as a stand alone, but we think the 3 CDs that come with the book are really useful, especially for practicing. It is so helpful to improving timing as a fundamental skill to play along with the CDs that are included with the book.
Manufacturing techniques can alter the impact of the variability of other factors. A .strandberg* guitar is made from lightweight but stiff materials. The neck is reinforced with carbon fiber. Each string rests on its own bridge that does not transfer vibrations to the other strings in the same way as a conventional guitar bridge. The bridges themselves are made from light and stiff aircraft aluminium instead of brass or steel as is commonplace. Each component is tightly coupled to the next with no room to vibrate. Regardless of tonewood, your .strandberg* will sound clear, airy, organic, dynamic, and respond quickly to the plucking of strings with a great dynamic range – as a result of the construction itself. The characteristics of different woods and pickups are transferred more effectively than might otherwise be the case. Is this better? Again, it depends on what the musician is after… I’ve come across for example ES-335 players that are intimidated by the responsiveness and dynamics and who become inhibited and self conscious when picking up a .strandberg*. But for most, it’s a pleasant experience that liberates their tone.
Few guitarists play slide guitar with more raw emotion or feeling than blues legend Muddy Waters. There’s perhaps nobody more important to the electric blues idiom, of which Waters became the primary spokesman. His playing was raw, dirty, raunchy, and everything else that makes the blues as great as it is. He undoubtedly inspired every great blues guitar player that came after him.
Artist Studies are available that explain the specific playing style of a guitar hero or band like Van Halen, Albert King, AC/DC, B.B. King, Chet Atkins, Iron Maiden, David Gilmour, Eric Johnson, Freddie King, George Lynch, Jack Johnson, Jeff Beck, Jimi Hendrix, Joe Pass, John Prine, Keith Richards, Metallica, Megadeth, Randy Rhoads, Ritchie Blackmore, The Edge, Tony Rice, Wes Montgomery
The Dolce is a cedar-top, with mahogany back and sides, and the usual set of Savarez Cristal Corum high-tension strings. At 9 lbs and 38” this is a slightly shorter and lighter-weight guitar, which will be more appropriate for a smaller person. This guitar does not come with a gig bag or other accessories, so if you choose this guitar, prepare to make a list of what your instructor of choice says you need.

A fantastic sounding unit and U2’s The Edge original delay sounds were a Deluxe Memory Man used on “I Will Follow” and “Sunday Bloody Sunday”. Some cool added features to the Memory Man is the added chorus effect you can put on the delays. This is one of the coolest delay pedals ever. Many pedals now digitally model the sound of an analog delay pedal and come very close with the added flexibility a digital delay pedal provides like extended delay times and tap tempo.
Many people will say that Overdrive and Distortion pedals are basically the same thing: wrong! While the overdrive tends to add gain and texture to your clean tone, emulating a cranked amplifier, the distortion intentionally clips and distorts the waveform of the guitar signal. The effect of distortion pedal is much more audible and the resulting sound is harsher and louder, and sometimes completely different from the starting sound. Distortion pedals are perfect for rock and metal players, and represents a safe boat for guitarists that may feel the need to have a backup to their tube amplifier: a distortion pedal into the clean channel of a rented amplifier can save your gig! The ProCo Rat 2 is an instant classic, while the Electro Harmonix Metal Muff/Top Boost gives you some serious distortion with a top boost in single box. And for your über-metal needs, the Harley Benton Extreme Metal is here to help.
The theory of evolution says that the longer something has been evolving the more complex it tends to get, and this is certainly true of the electric guitar, which has been evolving for over half a century. Electric guitar sounds rely on the instrument itself, the amplifier through which it is played and also on the loudspeaker system used. Further variables are introduced when miking techniques are taken into consideration, though these days miking is only one of the ways of recording an electric guitar — we also have a number of effective DI techniques from which to choose.
The earliest Teisco Spanish guitar of which I’m aware was the EO-180 from around 1952. This was basically a glued-neck folk-style acoustic guitar with a three-and-three slothead, round soundhole, bound top and glued-on bridge. Essentially dissecting the soundhole was a large triangular round-cornered pickguard with a white insert shaped like a sock, toe pointing toward the head, with a white-covered pickup situated on the ankle of the sock, just behind the soundhole on the bridge side. The cord appeared to come out of the side on the lower bout.
Guitar brands such as Antoria shared some Ibanez guitar designs. The Antoria guitar brand was managed by JT Coppock Leeds Ltd England. CSL was a brand name managed by Charles Summerfield Ltd England. Maurice Summerfield of the Charles Summerfield Ltd company contributed some design ideas to Hoshino Gakki and also imported Ibanez and CSL guitars into the UK with Hoshino Gakki cooperation from 1964-1987.[3] The Maxxas brand name came about because Hoshino Gakki thought that the guitar did not fit in with the Ibanez model range and was therefore named Maxxas by Rich Lasner from Hoshino USA [4].
In late 2013, it was announced that Absara Audio of Port Jefferson Station, New York, had purchased the rights to the Supro trademark from noted electronic engineer Bruce Zinky.[7] Zinky himself had used the Supro name for a series of amps beginning in 2005 from his company, Zinky Electronics. Absara announced in January 2014 that a series of new Supro amps would debut at the Winter 2014 NAMM Show in Anaheim, California.[8] The new Supro amps are cosmetically reminiscent of their progenitors from the 1960s.

My Carvin SH575 is a semi-hollow body electric. The size is similar to the Gibson 336, but sounds totally different. When you play this guitar you can't put it down, Carvins are made with computer aid wood carving CNC machines the proto-type of the guitar is measured with lasers and programed into the computer so every guitar they make is to the 1000th to the original. The finish and the detail is awesome. It also is wired with hum bucking pick-ups, piezo acoustic pick-up and Roland GK synth guitar. You can get some beautiful hybrid tones from this thing and I never can stop finding new ones. Try one of these out if you ever go to California I think there is like 5 stores around the L. A. / San Diego area, you will see what I mean.


As you'd expect, the most important decision to make with multi effects pedals is the choice of which effects, specifically, you want in them. The Electro-Harmonix Epitome Multi-Effects Guitar Pedal, for instance, is a veritable buffet of effects including flanger, chorus, reverb, pitch-shifting and more. But if you're looking for an expression pedal, you'll probably be more interested in a unit like the Vox StompLab IIG Modeling Guitar Effect Processor, which has one of those built in. Both of these multi effects pedals are top sellers, which comes as no surprise considering the versatility they bring to the table.

A better way to get distortion, of course, is to use guitar effect pedals. Got your hands on some pedals and starting to play around with the sounds you can make? Well, you can still use these tips to further enhance your distorted tone, since the same theory applies. Most distortion pedals have a volume, gain, and distortion knob in addition to whatever additional controls they give you. If you're simply not satisfied with your pedal's guitar distortion, you can turn the gain up and adjust the other settings, just like you'd do on your amp.
PRS S2 Vela comes as one of the more extraordinary models in this company’s lineup. This is made apparent by the body shape that stands out from their usual designs. When I had some one-on-one time with this axe, it left a good impression. One thing that really stuck with me was just how light it was. That usually means a thinner tone, but not with this PRS. It plays great, and is pretty smooth.
I have no idea what the set measurement is for the Authentics, and if it is any different than other guitars. Probably not. But guitars settle during their initial acclimation period and the exact bow of the neck and arch of the top can change. Actually it is almost certain to change some. There have been reports of all sorts of Martins with action reaching up near or over the maximum height within spec. But the same holds rue from brand of guitar that uses organic materials like solid wood.
Congratulations on buying yourself a top-notch axe — but you’re not ready to shred just yet. A good guitar also requires the right amp to achieve the right sound. Amps can be a daunting purchase (you certainly won’t be starved for choices on the beginner and enthusiast side of the price spectrum) and there are a lot of qualities that need to be taken into account. Want a low-cost amp that’s durable? Shoot for a solid-state amp. Want better sound? We suggest an all-tube amp instead. Want the most tonal variety on a budget? A modeling amp will get you all kinds of sounds without requiring a fleshed-out pedal board. But at any rate, no matter what you’re looking for in an amplifier, these 10 picks cover all the fundamental bases. So purchase, plug in and let’s rip.
i bought one in 1966, my first guitar, i paid 38.99 for it at a gibson dept. store in ft. worth, tx. it was mij under the same name and was marketed in canada as regent guitars and in the u.s. later as kent guitars. it is in the same catagory (some say better) as teisco its competator, some say there was some interfacing between the 2 companies. i really enjoyed it and wish i still had it, it played great and sounded great. i found this while surfing 4 another!!!
Little data is to be had on Teiscos from the late ’50s, but it’s probably safe to assume the line continued on roughly as before. In 1958 the EP-61 joined the line. This was obviously not numbered for the year of introduction! It’s not known what this guitar was, but shortly thereafter the high-number EPs were fancy full-bodied archtops, so that may have been it.
So you decided to play electric guitar. Once you get a guitar and an amp, the next step is to explore effects. Effects pedals can be separated into groups based on their functions. Understanding the different pedal groups is the key to getting the best sound when chaining them together. The largest pedal group is probably overdrives and distortions, and BOSS currently makes 16 different pedals in this category.
Stripped holes: small holes without much tension on them (i.e. pickguard screws) can be repaired with super glue (gel stuff). Put some glue in the hole and screw the screw in about 1/2 way. The glue will not stick to the plated screw, and will form threads. More severely stripped holes or holes w/ more tension on them (i.e. strap button screws) require pieces of toothpick be glued in w/ wood glue. Larger holes w/ alot of tension (i.e. neck mounting screws) require the hole be drilled out and a hardwood dowel glued in place.

With the neck profile and nut slots correct, approximate the positions of the string saddles for correct intonation. Low E and G string will set back about 3-4/32nds of an inch longer than the exact scale length. The A and B strings will set back 2-3/32nds , The D and high E about 1 32nd. Scale length equals the distance from the fretboard edge of the nut (where the strings bear off) to the middle of the twelfth fret, times 2. If the measurement from the front of the nut to the middle of the 12th fret is 12.75", then you have a 25.5 inch scale length (12.75 x 2= 25.5) Final positioning is done once saddle height is determined, but you need to be close to this final location when determining the saddle height.
“Tone that emulates the human voice is always more accessible,” Waara continues. “Otherwise, purely electronic music would have taken over, and we wouldn’t be making guitars anymore. There are some absolutes in human DNA about wanting to feel connection and that’s probably a fuller frequency tone, that’s tone that is more reminiscent of the human voice. Or, for instance, a violin or organic instruments that have been around for hundreds of years. When we talk about guitars having an organic quality, it’s because that’s rooted in what human beings know. Which is air moving, wood vibrating, people speaking.”
Any guitar luthier will tell you that the choice of wood is the single MOST IMPORTANT factor that will determine the sound of your guitar. My junk guitar had a body that was made of cheap reconstituted wood shavings instead of actual solid wood. Junk material like that means your sound will also be junk. Any note I played didn’t sustain for more than a single second and it didn’t have that boomy lush sound you normally get from acoustics.
The Gretsch G5421 Jet Club in Firebird Red is one of our favourite cheap electric guitars that features superb, world class build quality at an extremely budget friendly price tag. This is a professional level guitar at beginner prices and an absolute workhorse ready to be unleashed upon the stage of the world or just to accompany you on your journey into guitar. A chambered basswood body construction makes the guitar light on the shoulder but also provides a fantastic resonance and crispy treble.

Once you start getting into reverb, it won’t be long before you start noticing different nuances of this effect. A good portion of digital reverbs sound too sterile, while some analog can be too narrow in range. Finding that perfect type of reverberation matters if you are serious about building your guitar tone properly. Built in reverbs you usually see in lower quality amps are good for home practice and not much more. That isn’t to say that the added value of them being available in the first place is a bad thing. No, but you can’t really rely on those reverbs to get you anywhere serious. On top of that, a good analog reverb pedal is a one time purchase.
This is an American Fender Telecaster electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jangly indie sounds or clean country sounds but can be very rocky with more distortion added. This guitar is also a classic that has been used in alot of types of music.
Where can you find one? My guess is that FIDELITY was a housebrand (like Holiday or Silvertone), and these might be Valcos or some other maker. But I have since seen 2 or 3 of them on Ebay, not going for too much money. Also, there are several other brands (and no-brands) that look much like these, so keep your eyes peeled, don’t pay too much, and score a little gem that will have other guitar players saying “what the hell is that” and have your significant other shaking his or her head when the UPS/Fedex people come knocking.
well it does not effect the strings electronically. however. each pickup depending on its position on the guitar is designed to pick up a specific range of tones. the pickup closes to the neck is meant to pick up the bass range whereas the one closest to the bridge is meant to pick up the treble(higher) end of the tonal spectrum. all that aside when you actually move the switch it might have a reverberation throughout your guitar because the switch is just really hard or stiff. it might need to be broken in no worries there.
When I received this Epiphone LP Special II Les Paul Electric Guitar, Vintage Sunburst I discovered there are cracks in the wooden body, under the paint. I can tell that the wood was cracked before it was painted because the paint flows into the crack in one instance on the back, is visible up over the "shoulder" close to the strap peg and can be seen under the paint on the front. In another instance the paint bridges a crack on back below the cutout shoulder and can be seen under the paint in the right light front and back. Is this normal? (There was no sign of shipping damage on either the outer carton or on the inner product box). Regarding playing, the bass strings buzz on the frets when fretted (not my fingers) which probably can be corrected by adjusting the bridge. I was under the impression that Epiphone guitars were ready to use right out of the box. I have contacted Epiphone/Gibson company to advise on the cracks and the buzzing bass strings. I am concerned that the cracks may get worse, and if this is this normal for a guitar in this low price range made in china. I got a reply from Gibson Customer Service which said "We would need to see pictures, but it would be highly unusual if there actually were cracks in the wood. The set up on an instrument can shift during shipping and handling, so a new instrument may need to be set-up." I will probably return this instrument and buy one in person from a music store where I can see and try the product before buying it.
Footswitches allow for handsfree control of your multi-effects pedal, so having more of them is good, as long as you're OK with the added bulk and weight that they require. Some processors have a stompbox mode feature that lets you utilize footswitches much like a traditional pedalboard, but most of the time the switches serve as preset selectors, along with other secondary uses.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1499.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodL20582, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, priceVisibility=1, listPrice=899.0, salePrice=899.0, isOnSale=false, showMSRP=true}
Their first flat-top acoustic guitar was produced some time shortly before 1910, but at that time their flat-tops were still a long way behind Martin in terms of popularity. It wasn't until 1923 that they began to seriously break into the flat-top acoustic guitar market with their signature Nick Lucas Special model and began to give Martin a run for their money.

There were East coast and West coast distributors of wholly different instruments bearing the Hohner name in the late 70's-early 80's. One of them had decent guitars, the others were ****************e. Don't know which was which, but I do know the Hohner strat my friend bought new in Upstate NY c. 1980 was a stinkin' piece of crap. Not sure if it was a representative sample.
These are world class guitars and have got probably the best feel any guitar can give apart from that u can play everything on these guitars from classic rock to jazz and blues followed by metal. the main thing that these guitars are known for is their finish and there unique necks which are really fast and not too thin which keeps your tone and feel in place. I would say that these guitars definitely deserve a place in the top 3 and definitely do watch out for the petrucci signature models

I've spent years playing only my Gibson Les Paul. Right out of the box the Hummingbird blew me away. It came tuned perfectly to E flat. Tuned it up to E and continue to be blown away. It's warm and mellow where it should be, and bright and crisp as well where it should be. I've found it very easy to switch from my butter smooth LP to this acoustic, and it's beautiful sound has inspired me to get writing again. Then...I plugged it into my Epi Blues Custom 30W tube amp on the clean channel, and fell in love with the guitar all over again. Brilliant, full, radiant, crisp, warm and so much more. I don't use a pick, and this thing still rocks. I couldn't say enough good things about it! Far better quality than I'd ever expect for $300.

The panel on top carries the controls for an old school look and feel overall, consisting of a master volume, gain, bass, treble and the model AC10 comes equip with a built-in reverb effect that makes it even more powerful and articulate to use. This amp is at top of its class when used at home, awesome for a recording studio and bringing it on stage to cover a small to medium size venues.


Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches (18.4 cm). Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars' compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.
Since they're usually not sure if they'll stick to it I wouldn't spend a ton on it. Make sure it at least plays well. Learning on a poorly constructed guitar can really take the fun out of the whole process and may even convince you that guitar is harder than it really has to be. You can also fix many issues with less-expensive guitars by bringing it to a luthier.
"The library has a huge amount of great samples covering every nook & cranny of the electric guitar, and it really is of the highest quality... I could tell that they must have put in a gigantic effort into the scripting, sampling, and design... It’s easy to use, has extensive options for articulations, sounds even better with its effects, and yet it can have a pristine, clean sound as well. I highly recommend it... When they say 'Absolute Electric Guitar' on their website, those words are a lot to live up to [and] they achieved this with a brilliant product and awesome sound." Rob Mitchell (SoundBytes Magazine)
When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​

Ihave a 12 string dorado. I found a guitar that was sold for $299. It's a 12 string acoustic, Gretsch, 1971. Seems like the right period. The problem is that it is called doraldo. One letter out. Rosewood fret board, dot inlays. Exactly the same as mine but different name. Maybe it could be the same? Go to http://www.rabbithillmusic.9cy.com/id2.htm


Artwork: George Beauchamp's original "frying-pan" electric guitar design from 1934. On the right, you can see a top view of the guitar with the pickup unit shown in dark blue and the pickup coil (green) sitting underneath the six strings (shown in orange). On the left, there's an end-on, cross-section of the pickup unit (looking down from the head of the guitar toward the bridge). You can see that Beauchamp has used a pair of horseshoe magnets, with their north poles (red) and south poles (blue) aligned and the strings threading between them. The pickup sits between the magnets under the strings. From US Patent 2,089,171: Electrical Stringed Musical Instrument by George Beauchamp (filed June 2, 1934, issued August 10, 1937). Artwork courtesy of US Patent and Trademark Office.
No, could it be!? Finally we see a brand that does not come from England nor the US, but from Germany. ENGL specializes in tube amps for high-gain and heavy-metal. Its most famous users are Ritchie Blackmore and Steve Morse (Deep Purple), Alexi Laiho (Children of Bodom) and Chris Broderick (Megadeth). Both past and present Deep Purple members even have their own signature model. And there's also the standard Powerball, Fireball, Classic, and Invader series.
Tuning Instabily: Problems with tuning stability are almost always cuased by improper tuning technique (always tune UP to the note) or a binding nut. (There are RARE occasions where the string isn't seating correctly at the bridge, and we're not considering problems with set up regarding a tremolo) Even the cheapest geared tuners don't "slip" as a rule. If a geared tuner is failing it will make a "poping" type of sound as the gear jumps teeth. If the gears are loose, it is possible to pull a string flat with extensive (excessive?) use of a tremolo. If notes are going sharp it is due to the nut binding. What happens is excessive tension builds up between the tuner and the nut in order to overcome the binding. Then as you play the vibration of the string allows it to wiggle through the slot equalizing the tension, and making the string sharp. See above for info on a binding nut. If a fretted note is sharp it is an indication that the nut slots are not deep enough (or excessive presure with high frets/ scalloped or worn fretboard). If a string is going flat, it is always bridge related. Either a problem with the string seating fully (common w/ trapeeze tailpieces and ball ends in vintage tremolos (the reason they came up w/ bullet ends)) or binding on a rough saddle/ the edge of the trem block. Again, it is possible to cause a tuner to back off with extream tremolo, but rare.
Most beginners find that during the process of learning (after a year or so) you will figure out your own sound. You will naturally be drawn to music that features guitar in it, and great guitar parts. So what usually happens is that your own musical tastes will change and with this change the type of instrument that suits your sound the best will also change. So when you’re ready to take the next step, you will have a much better idea of what you really want.

In 1961, Grady Martin scored a hit with a fuzzy tone caused by a faulty preamplifier that distorted his guitar playing on the Marty Robbins song "Don't Worry". Later that year Martin recorded an instrumental tune under his own name, using the same faulty preamp. The song, on the Decca label, was called "The Fuzz." Martin is generally credited as the discoverer of the "fuzz effect." [18]


There have been two documented 1970 Brazilian rosewood D-28's, which are anomalies. The first one was #265783, which was retopped with red spruce in 1993. The second one is serial number 265941. There are several D-35's with mixed woods in the 3-piece back. Like D-35 #258962, which has a Brazilian rosewood center wedge in the back. Note some post-1969 Martins have some Brazilian rosewood, in the bridge, bridgeplate, fingerboard, or peghead veneer.
Some of the best guitar compositions come from simple experimentation; that's why jam sessions are so great. When you want to have your own personal jam session, using a headphone amp is a fantastic idea. That way, you can keep your genius to yourself until it's ready for its first audience. You'll have the freedom to experiment all you want without having to worry about unwanted ears listening in, and that'll give your new riff even more of an impact when you unveil it on your main amplifier.
An expander is the opposite of a compressor. It stretches out the dynamic range of your signal allowing the quietest sounds to be even quieter and the loudest sounds to be louder. This can be useful in situations where you want quieter noises—such as squeaky fingering sounds—to become inaudible in the mix where they don't attract attention, while your intentional tones soar to the top.
Once you have the height of the strings over the fretboard adjusted, you can fine tune the intonation setting with an electronic tuner. If the saddle locations are already close to where they should be (based on your measurements), your saddle height should not have to be changed very much as you make the final intonation adjustment. If this is a tremolo bridge and it is blocked, tension the tremolo spring claw to the correct setting( this adjustment will be the subject of a separate article).
With this modification, you will not get any parallel sounds which are so typical of the "Fender sound". (For example, "Sultans of Swing" is played with the middle and bridge pickups in parallel). The pickups in series gives you a fuller sound with much higher output, which is good for distortion. If you want a more versatile modification, go to the Wolf Wire™ Modification which will give you series choices, parallel, single coil, and out of phase options.
Cadsoft Eagle is a very popular tool with pedal builders. A basic version can be had for free. There are limitations on board size and number of layers in the free version, but these won’t come in to play for the majority of basic analog effects pedals.  Element14  includes a host of documents and tutorials.  If you get into complex designs or full professional use later,  full versions of Eagle, at time of writing cost $575, and $1640.

While the HSS Bullet Stratocaster isn’t available in a left-handed model, the similar, somewhat more costly Affinity Series Stratocaster is available in a left-handed version. This guitar differs from our top pick in that it uses slightly higher quality of parts and has a higher quality finish (based on our experience with the Affinity Series Jazzmaster); it has a single-coil pickup instead of a humbucker in the bridge position (which will be noisier and also brighter-sounding); and it has a vibrato bar.
SOLD OUT: Here we had a 40+ year old 1972 Alvarez 5080 Acoustic guitar that was built by the master guitar builder Kuzio Yairi. He used 30 year old vintage aged tone woods when they built this guitar over 40 years ago.. that would make this wood arround 70 years old... Thats right...you can say that about a new Martin can we... not going to get tone like this from a new Martin either. This is one high class example replica of the Martin 000-28 this model is quiet rare and beautifully adorned with exotic tone woods plese refer to the pics. Just have a look at the beautiful exotic old growth Jacaranda Brazilian Rosewood back, sides, fingerboard...headstock overlay .., ebony pins with MOP and brass ring all high end classic detailed appointments... notice the real patina this guitar plays real well and has been played and it shows... in a good way to my eyes.. I love it. So will you just have a look... no visable issues, no cracks to be found, inlays, bindings, pickguard, tuners,frets.....all good..and sound is rich and has a nice sustain and is a pleasure to play... fresh from the JVG shop with a fresh bone saddle & nut & new Martin Marquis strings sweet! A must HAVE 40 YEAR OLD VINTAGE YAIRI 000-28 STYLE, Claptons favorite for good reason... SORRY THIS GUITAR HAS SOLD gr8bids@comcast.net Thank you for your interest.
However, amplifiers can also be quite loud. Maybe you’ve got a fancy one, big enough to make everyone in a bar cover their ears. Or maybe you don’t have one at all, and have been playing on acoustic guitar. Either way, you may not have known that you can simulate the trademark sounds of famous amplifiers using something you probably already have: a computer. Using your computer as an amp isn’t too complicated, and it opens up a world of possibilities that the analog audio world can’t deliver on a budget. Some newer practice amplifiers have headphone jacks so you can play without making a racket, but those are only starting to become widespread and the majority of hobbyist electric guitar players would rather spend big money on a good stage-ready amplifier than a mediocre one to accompany their practice amp. If you’re an electric guitar player looking for a way to practice quietly or with headphones, this is the tutorial for you. You will need: An electric guitar A computer running Windows XP or better (Windows 7 or newer preferred) An instrument cable (both sides quarter-inch and mono, same cable used to plug guitars into amps) A ¼-inch to ⅛-inch mono adapter

The acoustic solos Reinhardt recorded with the Quintet of the Hot Club of France between 1936 and 1940 are simply astounding displays of virtuosity, melodic taste and speed that left indelible impressions on players throughout several generations, including Les Paul, Jimmy Page and Michael Angelo Batio. Django didn’t even need all four fretting fingers either, using only two left hand fingers to play complicated chords and hyperspeed solos (his third and fourth fingers were badly burned in a fire).
A real hall-of-famer from Ibanez, which displays true rock style and lightning-fast playability in an affordable beginner-friendly package. With the classic Superstrat body in a range of colors, this RG is made of solid basswood and features a slick, thin Wizard III maple neck, with rosewood fretboard and 24 jumbo frets, making it superb for chugging powerchords and fast soloing.
OK, so you're ready to try your hand at the electric guitar, but where do you start? A good place to start is with an electric guitar that's specifically geared toward beginners. And although many guitars cost over $1,000, there's no need to shell out that much dough for a student model/novice instrument. To help you sort through all the options, we put together a list of the best beginner electric guitars worth buying right now. So whether you’re looking to become a shredding metalhead, a cool jazz player or an all-American country star, one of these electric guitars will have you well on your way.

Make sure that only the notes you deliberately play actually sound. Guitar strings aren't isolated systems like the tone generators of a synthesizer; if you simply leave them open they may ring even though you've never actually played them. Always watch out carefully for such “rogue sympathetic vibrations” and make sure you properly stop strings that sound in unintended ways.


The tonal variations produced by an electric guitar, an amplifier, and a chain of stomp-box or rackmount effects processors are endless, and with the advent of the DAW and its many software-amp, speaker-cabinet and effects-modeling accoutrements, so are the options available for recording it. Since most commercial studio engineering techniques and tricks for recording the electric guitar apply to the project and home studio recording environment, let's turn on the gear, fire up the amp and get going.

With its playful old school appeal, many consider the Gretsch G5024E as a fun instrument to practice and perform with. Build quality and aesthetics are often cited in reviews, with many reports of the guitar eliciting positive response from friends and audiences. There are also reports from users who are very happy with both its amplified and acoustic sound.

i have played fender most of my life .Fast neck and comfortable .However when my musical interest changed to southern rock i decided to buy a gibson . The mahogony body sounds different as does the string thru design of my firebird .Now i play both .Out of the box i prefer gibson and dont need to change a thing .I see many fender players always looking for “that sound” changing pickups pots etc.and using many boxws to change the tone.All i use with my gibson is a wa wa and overdrive
Volume pots don’t attenuate all frequencies consistently. Treble gets attenuated faster which results in treble loss when volume is rolled down. Treble bleed circuits (or bright caps) are there to compensate for treble loss and make guitar sound at lower volume as close as possible to sound with volume maxed. There are several different treble bleed circuits used or recommended by guitar/pickup manufacturers. What’s common between them is that they are installed across guitar volume pot (input and output lug).
Slot Peghead vs. Solid Peghead (steel string models): Most models converted from a 12 fret slot peghead to a 14 fret solid peghead around 1934 (except the OM series, which went 14 fret in 1929/1930 and the style 17 and 18 models which were available in 14 fret style in 1932). Basically if the guitar has a 14 fret neck, it will have a solid peghead. If it has a 12 fret neck, it will have a slot peghead. Note there were some post-WW2 gut string and classical models (i.e. 0-16NY) and some post-WW2 special order steel string guitars (i.e. 1967-1993 D-18S) which always have a slotted peghead.
Read Full Review The brand ESP that we all know today started its roots as a shop in Tokyo Japan selling custom replacement parts for guitars that quickly gained a good reputation for its high quality. Soon came after the brand manufactured fully assembled guitars that burst in the trash metal seen of the 80’s signing in big name bands to carry their guitars and basses.
Electric guitar necks vary in composition and shape. The primary metric of guitar necks is the scale length, which is the vibrating length of the strings from nut to bridge. A typical Fender guitar uses a 25.5-inch (65 cm) scale length, while Gibson uses a 24.75-inch (62.9 cm) scale length in their Les Paul. While the scale length of the Les Paul is often described as 24.75 inches, it has varied through the years by as much as a half inch.[citation needed]
×