The amplifier includes buttons for four different amplifier simulations: Clean, Crunch (a typical rock/blues sound), Metal (self-explanatory), and Insane (a version of Metal that our panelists found so distorted as to be nearly unusable). Like the Champion 20, it has a gain control (which is labeled Drive), and it adds a midrange control to its bass and treble controls.
Fulltone’s popular Full-Drive pedal has the bonus of a switchable booster channel, while its overdrive channel goes to a fairly high gain and, unusually, uses asymmetrical clipping for a more textured sound that is quite different from the Tube Screamer’s. Asymmetrical clipping is also at the center of Boss’ SD-1 Super Overdrive (as used by Eddie Van Halen), generated by a circuit that uses two silicon diodes in series in one direction, and only one in the other, to clip each side of the waveform differently. Some players credit asymmetrical clipping with more richness, body and character; others say it sounds clanky and harsh, like an amp with mismatched output tubes. Then again, some guitarists—those in the former camp, probably—say they prefer the sound of mismatched output tubes for these same reasons. As ever, what works is up to you.
{"id": "114572014", "categoryId":"site5AAG", "name":"Used S421 S Series Solid Body Electric Guitar", "pageUrl":"/Used/Ibanez/S421-S-Series-Solid-Body-Electric-Guitar-114572014.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/S421-S-Series-Solid-Body-Electric-Guitar/000000114572014-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"239.99", "priceMin":"239.99", "priceMax":"239.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"Ibanez", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"159269514523", "priceVisibility": "", "itemType": "Used"}
Don’t be fooled by the lack of reviews for this guitar on Amazon. Dean makes some really solid guitars, they just happen to be a less popular brand than the other big names. I love this one because you’ve got 2 humbuckers for powerful rock and metal tones, but you get additional tonal versatility thanks to a push/pull coil tap. So, the C350 definitely isn’t a one trick pony. The flame maple veneer adds a nice finishing touch.
Just in Folks Here we have a super nice 2- pointer Mandolin ... Just Gorgeous Sunburst finish made and she is over 40 years ago and in SUPERB Players and cosmetic condition This Mando has some serious CHOP tone and is JVG Rated at Excellent Vintage and she is ready to Record or Tour TONIGHT! Get this rare Japanese Crafted beauty before she's gone... JUST IN! Ready to buy? ... EMAIL Joe : jvguitars@gmail.com .
I string up the guitar and tune it to standard pitch. Put the guitar in playing position and capo the first fret. I hold the 6th string down at the last fret as that is where the neck joins the body. Then I turn truss rod right (clockwise) until there is no relief hardly if any bounce at the 7th and 9th frets using the 6th string as straight edge, don't go too far just maybe a slight tiny bounce because you don't want to backbow the neck. Then I simply turn the truss rod left counterclockwise 1/4 of a turn for relief and that's it. Take capo off and set action at 12th fret with 6th string 5/64 and 1st string 3/64.
Tone wise, flamenco players appreciate the snappy and bright tone that this guitar reproduces, while acoustic guitarists find the playability and feel to be easy to transition to. Whether you want to focus on classical flamenco style, or you are merely looking to the sound of nylon string guitars into your collection, the GK Studio will not disappoint. The combination of its solid European spruce top and Cypress back and sides is a treat to look at and great to listen to. You can visit Cordoba Guitars for the complete specifications. You can also see two more Cordobas in our nylon string guitar roundup.

Chosen by artists over 3 decades for use on stage and in studio, the Zager 80 Series is the “go to” guitar for the touring musician or veteran player wanting a professional grade lifetime instrument. Consistently rated in the top 5% of acoustics in national and international publications competing with guitars 2 and 3 times its price, yet costs 50% less since you’re buying direct from our workshop in Lincoln, Nebraska. If you enjoy the deep rich bass that’s common in rosewood guitars, a solid cedar top takes it to the next level providing a very mellow, sweet response.  Combined with legendary Zager playability and you have a guitar that will go head to head with any acoustic on the market today…regardless of price.
The display borrows a lot of its design cues from Guitar Hero—which is probably a good thing, since so many players are already familiar with that system. Like GH, Rocksmith has vertical columns to show you which frets to hold, and the notes move toward you until they reach a line that represents the moment you're supposed to play them. However, GH's display didn't need to move since there were only five buttons. Because it has to span the entirety of an actual guitar neck, Rocksmith's display floats up and down. If you're playing primarily notes between the fourth and seventh frets, for example, it will show you just those frets on the screen, then slide up to the 10th or 11th when it's time for you to play those.
Harmony pedals are often used to generate vocal harmonies, but can also do wonders for bass and guitar sounds. Some vocal harmony processors use the signal from your guitar to create two- or three-part vocal harmonies. Most harmony effects let you specify precisely how much higher or lower you want the accompanying note to be. Modern artists such as Steve Vai and Robert Fripp have created interesting music using a purely pitch-shifted signal with none of the original signal mixed in.
You can run up to six of the 112 built-in internal effects within the Boss MS-3 Multi Effects Switcher at the same time and integrate three of your existing stompboxes into that sound too. So, to say there’s a world of options at your feet is an understatement. You can use it with your hybrid MIDI gear and utilise it to channel switch between amps too.
• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.
I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.
The Venue has an adjustable gain feature designed for acoustics, which is compatible with both passive and active electronic systems. This is, of course, in addition to the five-band EQ we mentioned earlier. For feedback control there's a Garret Null Notch filter and a clipping light that will tell you when you're feeding back or when you need to cut down your output. Other perks include a full chromatic tuner and a boost button that gives you a nine decibel jump, ideal for solos or instrumentals.
{"pageName":"[gc] vintage","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
The only proper way to make a "high string action" Martin guitar play correctly is to do a "neck set". This repair involves removing the neck on the guitar, and refitting the neck at a slightly increased angle, which lowers the string action. If done correctly, this does not affect the value of the guitar (and in fact can make it more valuable, as the guitar is much more playable). Generally speaking, most players would agree if the "string action" is more than 3/16 inch (5 mm) at the 12th fret, the guitar needs a neck set. This measurement is taken from the bottom of the low-E string, to the top of the 12th fret.
And a heads up for anyone interested and if you're like me and somehow missed the fact that Line 6 is releasing a soft vst version of their Helix effects and amp sim package called Helix Native. I'm waiting on making a decision on updating my soft Amp/Fx packages until I see what it is like. If it's approaching anything like the hardware version(s) it should be great.
very recently I've been trying to get a band together where the Humbuckers of my les paul would suit the sound a lot more and decided to pull out my les paul, on trying to tune it, I noticed the intonation was a little off on all strings (not particularly noticeable by ear, but plugged into a tuner one could see it was off), but on the high E string it was very much off, from the third fret and higher it is very off sounding.
It’s 1951, a dark, rainy night on the backstreets of Memphis, Tennessee. Ike Turner and His Kings Of Rhythm are packing the gear into the station wagon, getting ready to head off to the studio to record a track for producer Sam Phillips, a track that the Rock and Roll Hall Of Fame will one day honor as the first rock and roll song of all time, ‘Rocket 88.’ (Although, distinctly unfairly, the song will be credited to singer Jackie Brenston and the imaginary band ‘His Delta Cats.’) “The amp—a Fender Bassman—was in the trunk of the car and it fell out, right on the road,” Ike Turner told Guitar Magazine’s Rick Batey in 1998, “and it was raining, so the amp got wet. When we got to the studio and plugged it in one of the tubes went ‘pop.’ We didn’t have no more tubes—so that’s where the fuzz came from.’
A good custom shop will have insight based on their experience that will help make the project better. That’s part of being custom — making concepts a reality. But there is more to running a custom shop than simply having the ability and experience to create someone’s dream. Figuring out what that is requires a little digging. The concept is buried in first understanding the other meanings of the word custom. Although “made-to-order” is a correct characterization where you can personalized the headtsock with your name or initials and you can CUSTOMIZE YOUR GUITAR: Mahogany, Alder, Maple, Bass Wood, Right/Left handed guitar, Body colour, Neck profile, No dots on fretboard and Fret size.Our Custom Shop Guitars referred to in this site as drawing "inspiration" from the major guitar brands and any reference to custom shop brand names or "Inspired by" are made strictly for comparison purposes only.
The key feature that makes the GT-1000 stand out from the crowd is the inclusion of the ingenious AIRD (Augmented Impulse Response Dynamics) technology which ensures your effects respond correctly with the likes of tube amps and don’t muddy your sound. You can read more about the AIRD technology here, but in a nutshell, it ensures the dynamics of your unique amp are preserved. With other multi effects, you might find have to turn your amp emulations off if you want your effects to respond correctly to YOUR amp, but with the GT-1000 you won’t have to do that as you can select which type of amp you’re playing with and the pedal will respond correctly.
Simon Stockhausen began his stellar musical career at the age of five. His multi-faceted and wide-ranging oeuvre has since embraced all manner of projects and styles, including jazz and improvisational collaborations, countless compositions for ensembles and chamber groups as well as work for major European theatre companies and orchestras including the Hamburg and Berlin Philharmonic Orchestras. In 2009 he further extended the range of his musical endeavors with the creation of a sound design company through which he produces sounds, patches and libraries for software synths and plug-ins, serving sound designers, musicians and post production professionals.
A common format of bass amplifier–the "combo" amp–contains the amplifier electronics and one or more speakers in a single wooden cabinet. Combo amps have been used by musicians since the 1920s, as they are convenient for transporting to rehearsals and for performances at small to mid-size venues. Combo amps range from small, low-powered "practice amps" used for individual practice, to mid- and large-size and more powerful combo amps which produce enough volume for rehearsals and small to mid-size venues (e.g., nightclubs). For larger venues, such as stadiums, bassists may use the "bass stack" approach, in which one or more separate speaker cabinets, each with one or more speakers (but not containing an amplifier) and a separate "head" containing the amplifier electronics are used. With a large "bass stack", a bassist can obtain a much higher wattage and onstage volume than a "combo" amp could provide. As with an electric guitar amp, a bass amp is not simply used to make the instrument louder; performers use the preamplifier and equalizer controls and, particularly in amps from the 1980s and 1990s onward, the onboard electronic effects, to create their preferred tone.
O WOW!...I love...Fallout 4 is a great game like the rest of the fallout series but if your a fan of the series u will be kinda of down that the choices u make don't affect the outcome of the game because they made more of a story they wanted to tell but don't lose hope still a good game and they might make a sequel to new Vegas and there just might be a Multiplayer for new Vegas 2....The world is so large and the gameplay non linear (which is good and bad), I find if I walk away from the game for a while, I have to spend a lot of time figuring out where I was and where I stashed things when I come back to it later.
Of course, no-one says you have to use the same mic on each speaker cone. For example the SOS interview with Toby Wright shows an SM57 and an MD421 on separate speakers, and Don Smith mentioned using an SM57 and an AKG C451 on separate speakers when recording Keith Richards. Sylvia Massy Shivy also uses the SM57+MD421 combination, but sounds a note of caution when deciding on the exact positioning of the mics: "You have to be very careful with phase, just check it until the signal is the strongest."
Popular Categories: Body and Skin Care Air Conditioners Air Purifiers Anti Pollution Mask Cameras External Hard Disks Eye Care Face Cream Face Pack Face Scrubs Face Wash Fragrances Gaming Console Hair Care Hair Conditioner Hair Gel Hair Oil Health and Nutrition Health and Wellness Health Food and Snacks Laptops Makeup Mobiles Pen Drives Personal Care and Beauty Power Banks Protein Supplements Refrigerators Shampoo Smart Assistants Smart Watches Speakers Tablets Televisions Toiletries Toothpaste Washing Machines Water Geysers Water Purifiers Women Analog Watches
This guitar is simply phenomenol and the build quality, materials, and attention to detail are just mind blowing! I have a collection of vintage Golden Era Gibsons, Fenders, Gretschs, and Martins, so it takes a very special guitar to impress me. The Kraus OM delivers in every way! Just check out the rosette: Paua shell bordered by curly Koa wood inlayed into a red Spruce top-simply amazing! And the curly koa fretboard binding is a sight to behold! The Honduran Rosewood is becoming exceeding hard to find, and will probably go the way of Brazilian Rosewood as a protected wood soon. The Honduran Rosewood used on this guitar took months to source, and it looks spectacular! The guitar itself took 16 months to build, and the wait was well worth it, and well beyond expectations!

Rickenbacker basses became a staple of 1970s hard rock and were featured on countless recordings of the decade (such as the first two albums by Deep Purple). These instruments were also widely used among progressive rockbassists, particularly Chris Squire of Yes and Geddy Lee of Rush, who achieved distinctive signature sounds with their Rickenbacker bass, strung with round-wound Rotosound bass strings. The “Ricks” were not as visible among the punk/new wave explosion of the late 1970s and early 1980s, with the notable exception of Kira Roessler (Black Flag). Many bass players continue to play Rickenbackers. (see “Ric” players section below)

I like the pseudo PTB scheme where the tone cap (I prefer .033 or .022mF) is attached to lug 3 of the pot and to ground. Lug 2 is connected to the Volume pot’s lug 1 and there’s an additional small cap (0.001mF or smaller) connected between tone pot lug 1 and Vol pot lug 2. Assume both pots are Log types: with tone at 7.5 (ie halfway along the pot’s sweep) there is no appreciable treble cut, and the volume pot gives a pretty even tone throughout its range. With tone pot higher than 7.5 bass is cut as you roll back the volume, with tone pot lower than 7.5 treble is cut. Minimum bass setting – vol approx 3, tone full up. Minimum treble setting vol full up, tone full down. I have this in most of my guitars and love it.

Some professional-grade amp heads, such as Ampeg's SVT400-PRO, have an audio crossover, an electronic filter that enables a bassist to split their bass signal into a low-pitched signal (which could be routed to a cabinet suited for low-pitched sounds, such as a 1x15" or 2x15" cabinet), and then send the middle and high-frequencies to a different cabinet suited to this register (e.g., a 2x10" or 4x10" cabinet with a horn-loaded tweeter). Amps with a crossover can either have a single crossover point pre-set at the factory (e.g., 100 Hz) or a knob is provided to enable the bassist to select the frequency where the bass signal is split into low and higher-pitched signal. The SVT400-PRO has a user-adjustable crossover knob. Amps with an adjustable crossover point can enable bassists to fine tune the sound of their bass sound. For example, in some halls, a bassist's usual crossover point may sound too "boomy" or rumbly; turning the crossover knob to send more of the low-pitched bass signal through the 2x10" cab may reduce this problem.

You finally bought that guitar you've been eyeing for a long time. You open the case, gently remove it from its plush cradle, and hold it in your arms. A fresh pick in your fingers, you begin an elegant and complex arpeggio that ranges across the fretboard. Suddenly, right in the middle of the run, the strings start buzzing. You check your technique and it's fine. So what's the problem?
I work out of my home shop in Idaho Falls, Idaho.  I do repairs for clients and guitar shops all over the United States.  I’d love to help you repair or restore your guitar.  Repair prices are based on a rate of $60 per hour.  These prices apply to guitars in otherwise good working order.  Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss.  Consultations are always free.
The Boss Waza 212 Guitar Amplifier Cabinet has been specially designed as a partner to the awesome Waza Amp head. Packed with 2 custom made 12 inch speakers and ready to roar! You can even select whether you want the back to be open or closed, allowing you to make whatever sound you want! If you want extra speakers, there's also the Boss Waza 4x12 Guitar Amplifier Cabinet with 2 x 12" speakers to pump out your riffs with.
Launch price: $1,499 / £1,419 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood/maple (dependent on finish) | Frets: 22 | Pickups: 3x V-Mod Single-Coil Strat | Controls: Volume, neck tone, bridge and middle tone, 5-way selector | Hardware: 2-Point Synchronized vibrato, Fender standard staggered tuners | Left-handed: Yes | Finish: Antique Olive, 3-Color Sunburst, Black, Candy Apple Red, Natural, Olympic White, Sienna Sunburst, Sonic Gray
Some distortion effects provide an "overdrive" effect. Either by using a vacuum tube, or by using simulated tube modeling techniques, the top of the wave form is compressed, thus giving a smoother distorted signal than regular distortion effects. When an overdrive effect is used at a high setting, the sound's waveform can become clipped, which imparts a gritty or "dirty" tone, which sounds like a tube amplifier "driven" to its limit. Used in conjunction with an amplifier, especially a tube amplifier, driven to the point of mild tonal breakup, short of what would be generally considered distortion or overdrive, these pedals can produce extremely thick distortion sounds much like those used by Carlos Santana or Eddie Van Halen. Today there is a huge variety of overdrive pedals, and some of them are:
Ibanez Artcore AF75 Electric Guitar Another hollow body guitar to whet your appetite! The Ibanez Artcore AF75 isn’t as “old” as the other models here but it has earned a huge following because of its affordability, quality workmanship and versatile sound. Suitable for a variety of music styles, the Ibanez AF75 Artcore is also perfect for beginners eager to get started on a moderate budget.
Whereas tube amps are the traditional, solid-state amplifiers represent the modern guitar amplifier (even though they have been around for decades). While some guitarists refuse to consider solid-state amps worthy of their time, models such as the Roland JC-120 Jazz Chorus are proof that solid-state amplification is not only capable, but preferable in some cases. This high-end amp offers 120 watts of power, professional-grade tone and awesome versatility. It’s a good reflection of this segment, which offers endless versatility with affordable prices, low maintenance and incredible reliability.
IN STOCK:,Vintage well built!...Premium build quality by Lyle crsfted in Japan, solid spruce top, high grade quality Mahogany neck see pics. Neck profile is medium profile very comfortable..NEAR MINT JAPANESE VINTAGE GUITAR ...this guitar is like having a new 38 year old guitar it looks so newish... its finish is still very glass like and has been well taken care of over the years well preserved for YOU. The neck angle is PERFECT , frets still are like new still. The action is VERY nice & low and it plays with ease you will be very pleased indeed with its overall condition this is exactly what we look for at JVGuitars to bring you the best near mint vintage. The back and sides are also not your average run of the mill grain but very beautiful vividly wavy grain looking like some exotic woods for sure stained cherry like they would do with mahogany... very nice detail & binding and perfling work overall..this guitar is a real pleasure to play too and sounds wonderful. Anyone would be very pleased and proud to own this nearly 40 year old beauty..
Learning the notes on your guitar fretboard is one of the most important things you can do to advance your guitar playing skills. Knowing this information opens up an enormous amount of possibilities and can greatly help ease the learning curve for future guitar exercises. From scales, to soloing, to chord positions / progressions, knowing where each guitar note without having to think about it will put you well ahead of other guitarists who have not mastered this yet. This guide will give you some background information regarding how the notes on your guitar fretboard are laid out and of
The Eastcoast Vintage T Series Custom Electric Guitar seen here in Flame Red is a cheap electric guitar that certainly doesn’t suck! It features appointments usually associated with higher tier guitars such as a solid alder body and hard maple neck. In addition, you have a high quality 22 fret rosewood fingerboard as well as 2 x single coil pickups to achieve a wide variety of tones from rock to blues to country – this thing can handle it all. The “T” style bridge is a great feature often found on guitars 3 x the price. A fantastic option and an extremely hard working, handmade guitar for those in need of a high quality first guitar or a great second option for the studio or stage.
P good...So Fun...Like most console gamers, I have greatly enjoyed the "Arkham" Trilogy by Rocksteady Studios, I say that because I did not complete Arkham Origins (Dev by Warner Bros.), however I did beat that now infamouse Deathstrokeboss fight but after that the game felt very recylced and I told my self I would for next-gen Arkham installment by Rocksteady....I was a fan of all three Batman games that came out last gen. Arkham Knight changes the formula just enough to keep it fresh, along with amazing graphics (best water effects ever) and Dual Shock 4 controller options, I know I'll be playing this game for quite some time.
@Ricardo – I recommend placing tuners as close to your original signal as possible at the beginning of your signal chain. An EQ pedal can be placed where you would like to filter your signal to the settings of the EQ which is technically at any point in your signal chain. Try the EQ in different locations and use the setting that works best for your.
As far as reliability goes, a guitar is actually quite simple to make reliable. Build, sound quality and playability are much more important than reliability per se, simply because if the guitar is at least half-decently made it usually turns out to be quite dependable. The biggest reliability issue would be a guitar that cannot stay in tune very long. This is something that often happens in regards to the build and material quality of acoustic guitars, but with electrics it’s something that can usually be corrected by swapping out the tuning machines to locking ones, or at least better-performing ones as well as setting the intonation and neck relief correctly.

In 1966 Vox introduced the revolutionary but problematic GuitarOrgan, a Phantom VI guitar with internal organ electronics. The instrument's trigger mechanism required a specially-wired plectrum that completed circuit connections to each fret, resulting in a very wide and unwieldy neck. John Lennon was given one in a bid to secure an endorsement, though this never panned out. According to Up-Tight: the Velvet Underground Story, Brian Jones of the Rolling Stones also tried one; when asked by the Velvets if it "worked", his answer was negative. The instrument never became popular, but it was a precursor to the modern guitar synthesizer.
Serial #59640 New York label Epiphone Triumph circa 1949. Blonde finish. Spruce top, tiger flame maple sides and back. Cherry neck with diamond mother of pearl inlay. Small nick less than an inch wide on left front. Original Frequensator tailpiece with nickel finish, partly worn. Grover tuners fastened with screws and glue. Edging on back body has .25” gap at connection.Blonde natural lacquer finish in good condition. Glossy and brilliant color. Shipping quote inside US only. Ask for quote outside the US. 

hey i have a decca guitar 2 pick ups sight body damage. i bought it for 7 us dollars included amp (amp doesnt work).i put probably 50 dollars into repairs on other thing such as new strings. another repair i made was where the neck connects to the body of the guitar someone unscred that plate pulling the guitar apart shoved "wallpaper or tissue box pieces" in it screwed i back together. i cant find any similar guitars like this in shape. but it has the decca trademark. no model numbers or anything. my guess is someone took a fender body and replaced the neck, becausee the neck doesnt line up with the body. there is 1 tone dial 1 volume control 2 pick ups 6 strings a "whammy bar" which is held up by a thick spring about an inch long. the whammy bar does fold back to the guitar wich caused most of the scratches before i recieved this guitar. please email me if you understand what im saying and have something nice to say especially if it is worth more than $7.50. aain my email adress is nuckthebuck@aol.com. my name is Craig Nuckles.
There are a very large number of acoustic guitar manufacturers in the world. However, not all are among the best, but this American brand specializes in acoustic guitars. You will find Martin guitars among the top 10 acoustic guitars in the world. It has greatly influenced the look and shape of the American acoustic guitars. Martin guitars are made from highly seasoned wood, which produces some really melodious tones. Mind you, these guitars can be expensive and taking care of the instrument is extremely important. It makes some extremely beautiful models like D-28 and D-45; however, they also manufacture budget-friendly models.
Heat-treated Maple is used for the AZ's neck construction. Its use increases the wood's stability, durability, water resistance and tolerance of temperature changes. After extensive prototyping and trials, we concluded that 20.5mm thickness at the 1st fret to 22.5mm at the 12th fret is the optimal neck thickness for this process. The neck is sealed with an oil finish (sealer coat) which feels similar to a comfortable well-played guitar neck.
The Blues Harp has been around since the early 1970s. Until the 1990s, it was functionally identical to the Marine Band, the only differences being the cover plates and the varnish on the front of the wood comb, and the Blues Harp's profile was thinner as well. At one point, Johnny Cash promoted the Blues Harp.[20] In the 1990s, Hohner made the Blues Harp part of its Modular System (MS) line. This new Blues Harp lost its uniqueness, and is interchangeable with the other models in the MS line, but it currently remains the standby of many players who use MS harps.
Additionally, George Harrison used a custom-built rosewood Telecaster during the recording sessions for The Beatles‘ Let It Be album (including the rooftop concert), played through aLeslie speaker; Big Twist and the Mellow Fellows guitarist Pete Special frequently had reissue of Harrison’s Tele onstage in the mid-1980s, but rarely played it. Pearl Jam singer and guitarist Eddie Vedder has been known to use a custom black Telecaster with a white pickguard containing a black arrow decal pointing towards a target design under the strings. Guitar virtuoso Chet Atkins, known for the variety of acoustic and electric guitars that he used, occasionally played a Telecaster in his duets with Jerry Reed.[6]
I have a Samick Avion AV7 that I've been having trouble with a buzzing low E string when strumming with the first four frets. The bow is .013" and I set the 12th fret E string height to 2.5mm which helped, but not cured. I used a depth gauge to measure my frets, most measure at .043-.045" but the last two frets (21,22) measure at .052". At this point, would it be best to loosen the truss rod a 1/4 turn, or should I address the high frets, or could it be something else altogether? Thanks for the information.

One day I went over to hang out with a friend on Long Island’s prestigious, luxurious north shore. He was also an amateur, aspiring, guitarist, and perhaps slightly more advanced than me – after all, he wrote a solo, even if it didn’t belong to a song yet. But he was very excited when I arrived and wanted to show me something cool in the family room. When I stepped inside, what did I see strewn about the floor but a whole bunch of effects pedals surrounding his electric guitar like a battalion about to march on and conquer a fierce enemy.

Certainly the most desirable of the Martin body size is the 000, 0M, and D sizes. Many consider the 000 (and OM, which is essentially a 000) to be the ultimate guitar size, where others feel the "D" size is the best. It's personal preference. There are some interesting facts though about the 000 and OM sizes. (In Martin's 1934 catalogue, any flattop guitar that had a 14-fret neck was named an "Orchestra Model", while the older 12-fret design was named a "Standard Model".)
From the 1860s on, fan bracing became standard in Europe. Martin and other American builders including Washburn and others since forgotten (Schmidt & Maul, Stumcke, Tilton) used X-bracing instead.[3] The sound of X-bracing may be considered less delicate with gut strings, but it prepared the American guitar for steel strings, which emerged in the first quarter of the 20th century.
I'll start off by saying I am a novice guitar player. I've been playing off and on for 30 years, but more off than on. I've been playing on a hand-me-down Yamaha acoustic that was once a great guitar, but through many years of moving, poor storage and not doing anything other than the occasional set of new strings, that Yamaha just did not play well. One reason I was so off and on is that I could never get a clean sound from the Yamaha. I just thought I was not capable of learning guitar. Then, about a year ago, I tried out a friend's Fender acoustic and, after apologizing in advance for my poor playing ability, found that the same chords I struggled with on the Yamaha sounded crisp and clean on my friend's Fender, and I didn't have to make my fingers bleed

I bought my Norma accoustic in 1971 from a lady dealer who bought-out other stores going out of business. I paid $50. for guitar,case and strings. Best $50. I`ve ever spent. The sound gets better everyday. I have played the local market a lot, and fronted a Jamboree stage for 12 years (did the microphone work and sang), where I saw many a performer and their guitars come and go. Everyone was envious of my good sounding guitar. I applied a Dean Markeley electric pickup into the round hole and "wow" what a sound. Wouldnt take nothing for it. I own 7 accoustics,4 ele and three ele bass` guitars. I take my Norma everywhere. I am in the Georgia Music Hall of Fame and get lots of opportunities.
The Wah Wah pedal is one of the coolest guitar effects ever. Released in 1967 as the Vox Clyde McCoy. Oddly enough Clyde McCoy was a trumpet player as the pedal was to be used when amplifying the horn. Fortunately guitarists picked up on the almighty wah. The name Cry Baby has become de facto for the wah as it became the most popular. A wah is basically an active tone control that boosts lower frequencies through higher ones by using the sweep of the pedal. A guitar’s tone knob is passive and just rolls off high end, the wah electronically boosts frequencies.

Amongst the best guitar brands in India for acoustic guitars, Martin is one that stands out. Martin is one of the best known brands for its steel-string guitars. It is a leading manufacturer of flat top guitars which produce top notch sound quality. However, the company is best known for their signature dreadnought acoustic guitar with X-bracing. It is truly one of the best guitar brands for some of the best quality guitars in the market.

PAINT INFO Remember to stick with the medium that you have chosen to finish the guitar with. Never mix lacquer with water base. This will lead to a cracked finish or lifting up off the clear coat. For my guitar I used a lacquer based paint that I got from an auto shop for one project and just plain white lacquer paint that i got from Home Depot. The waterbased paints and clear coats tend to be more expensive so that's why I chose lacquer. Make sure the surface has been cleaned and is dust free before you begin to paint. Try to find cans that have a fan nozzel because it makes it easier to get an even coat.
Another piece of advice most experienced guitar players will give you is to keep your reverb pedals near the end of your signal chain. The reason for this is simple but requires a more colorful explanation. Imagine your signal chain as a conveyor belt for ice cream. As the signal leaves your guitar, it is just a plain vanilla mass that gets another layer of flavor as it hits different pedals. Distortion might add a nice chocolate glazing, then we have the modulation with its meticulous icing, and so forth. A reverb pedal in this context are sprinkles. You don’t want to add them at the beginning since they can completely change the way every other ingredient that comes afterward behaves. You add sprinkles at the end. In appropriate amounts only.
The ’37 Spanish Guitar ($40, $5 for a case) illustrated in both the Sorkin and Grossman catalogs was basically the same as before, but now with plastic button tuners. This still had no f-holes. The previous basic Regal trapeze tail is now shown replaced by a stamped National trapeze. Indeed, despite the fact that catalog illustrations remain retouched versions of the old Regal-made guitars, these probably had Kay bodies and bolted-on National Dobro necks. Gone is the 1/4″ jack in favor of the screw-on microphone attachment. Finally, the new cylindrical-magnet pickup is offered as the “Mated Pick-Up.” This is significant both intrinsically and in light of later Supro features. This pickup is “mated,” i.e., attached by three screws, to the bridge saddle. The pickup sat inside the guitar contained in a wooden box. This was the beginning of National Dobro/Valco’s association with what would later be called the Bridge-Tone under-bridge pickup featured in many of its electric guitars.
{"id": "113469598", "categoryId":"site5AAG", "name":"Vintage 1960s K300 Solid Body Electric Guitar", "pageUrl":"/Used/Old-Kraftsman/Vintage-1960s-K300-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/1960s-K300-Solid-Body-Electric-Guitar/000000113469598-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"539.99", "priceMin":"539.99", "priceMax":"539.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"60.00", "priceSavingsMaxPercent":"6,000", "inventory":"1", "brand":"Old Kraftsman", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"234720911023", "priceVisibility": "", "itemType": "Vintage"}
The first thing that strikes you about Nate Savage’s Guitar Lessons YouTube Channel is how well the structured, numbered lessons are organised on the YouTube Home page itself. Overlays on the opening titles screens and the names of the lessons make it very clear about the content and help you to choose exactly what you need, or let you skip over any unnecessary stuff. His complete beginner topics go right back to “How To Hold The Guitar” which might sound really basic, but Nate’s absolutely right to nip any bad habits in the bud at the very beginning and that particular video could the most important 3:26 of your career. And I have to make mention of the high production levels on Nate’s videos. The vision and audio is excellent, the lessons are well made, and Nate’s friendly, easy-going manner makes you feel like he’s your best friend and guitar tutor at the same time.

Let's now look at two real-life examples of what this would look like with a realistic setup. Our first example will be a linear sequence without an effects loop, while the second will use an amplifier effects loop. It should be noted that many pedals themselves can host their own effects loop, so how you set it up is up to you. It functions the same either way.
In the grand scheme of things, fixed bridges are as simple as it gets. Aside from saddles, which are used to tune in intonation, there are usually no other moving parts involved. The benefit of fixed bridges is their ability to retain intonation and tuning over time. If you're just starting out, sticking with a fixed bridge will make your life much easier. However, it does have its limitations compared to a tremolo bridge.

Let’s start with body style. This is quite simply the shape of the guitar’s body, and there are potentially a lot of them to consider. As a general rule, the larger the body, the more resonant it will be, giving it a deeper, richer tone. This is clear for things like the hummingbird, with the big square shoulders, and the dreadnought style body, which is generally the largest body type you’ll encounter. The drawback of larger bodies of course is that they’re more cumbersome and less ergonomic to play.
Much like booster pedals – where its placement depends on what exactly you’re looking to boost – the location of compressors and wah-wah pedals in a signal chain will vary depending on what type of sound you are trying to create. In this case, you are encouraged to experiment with their order and see what you like best. Although as mentioned above, try to keep the wah-wah after tier one effects as they generally do not sound that usable in that order. Compressors, on the other hand, can be placed before any pedal, even distortion, as it shapes the signal rather than modifies it.
An American company that makes some amazing acoustic and electric guitars, Taylor guitars are considered as one of the best in the world. Like Martin, they can be expensive, but surely worth every penny. Taylor and Martin have the upper hand when it comes to acoustic guitar brands in America. One of the popular series is the 200 series and is of great value. For beginners, Baby and Big Baby, and the GS Mini are perfect choices as they are small-bodied.

I have a Fender Chinese made Telecaster from the Modern Player Series. The finish is spectacular, and while it sometimes feels like they just used a lot of gloss to cover it, it plays and sounds well. I have played it through many amps and it does the job of both a Telecaster and a Strat style. With a humbucking pickup, a lipstick and a strat pickup, this is a satisfying guitar and moddable for people looking for something they can work on without fear of screwing up and wasting a thousand dollars.
I skimmed ahead and quickly realized that, at last, someone has written THAT GUITAR BOOK that we are all looking for when we start out but that no one seems to have written yet but that you hope to write someday when you finally figure out what you are doing so that you can help others and prevent them from wasting so much time and money and hopes....(takes a breath)
While styles and models may vary, electric guitars operate on the same general principles. The pickup mounted on the electric guitar’s body functions as a magnetic field. When a metal string is plucked and vibrates, it generates a current. That current is transmitted by the pickup through a preamp circuit with tone controls to the guitar cable, and in turn to the amplifier. The amplifier boosts the signal and modifies it with various tone controls and effects, depending on the amplifier's design and capabilities. The signal is then output to a speaker, which converts it to sound waves. The type of pickup(s), tone controls, strings, playing techniques, and other factors built into the guitar's design all influence the signal that is sent to the amplifier. In short, each component of the guitar affects how the guitar sounds.

The pre-amplifier section of a guitar amplifier serves to amplify a weak instrument signal to a level that can drive the power amplifier. It often also contains circuitry to shape the tone of the instrument, including equalization and gain controls. Often multiple cascading gain/clipping stages are employed to generate distortion. Because the first component in a valve amplifier is a valve gain stage, the output level of the preceding elements of the signal chain has a strong influence on the distortion created by that stage. The output level of the guitar's pickups, the setting of the guitar's volume knob, how hard the strings are plucked, and the use of volume-boosting effects pedals can drive this stage harder and create more distortion.
When Electric Guitars first hit the music market way back in the early fifties, they weren’t easily accepted by the people. However, later electric guitars became an integral part of the music industry throughout the world. The following article describes this amazing music instrument, which unlike its conventional counter-part, works on the laws of electromagnetism.
Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: http://www.guitarnuts.com/wiring/shielding/shield3.php Some great info on that site, you should have a browse around!
Tremolo is the gentle art of making your signal subtly cut in and out of volume. Think of all those old surf records. Phase and flange are quite similar in essence; phase emulates the sweeping of the frequency band, alternating between cutting the bass and treble frequencies, while flange does a similar thing but with a slightly more extreme sound. Wah is perhaps more well known; the Jim Dunlop Cry Baby wah pedal has been used for decades by players of all genres. Adding a highly distinctive wah-wah sound can elevate a solo into something infinitely more interesting. Or it can add a bit of that classic wakka-wakka sound you hear on classic funk records.
Ibanez Artcore AF75 Electric Guitar Another hollow body guitar to whet your appetite! The Ibanez Artcore AF75 isn’t as “old” as the other models here but it has earned a huge following because of its affordability, quality workmanship and versatile sound. Suitable for a variety of music styles, the Ibanez AF75 Artcore is also perfect for beginners eager to get started on a moderate budget.
The stars of the show are inarguably the pickups: the EMG Retro Active Hot 70 set, which goes for $200 alone. This combines a ceramic humbucker at the bridge and Alnico V humbucker at the neck—both open-coil—to produce the hot tones of Van Halen and other ’70s hard rock acts. They’re active pickups, too, wired to a FET preamp that minimizes noise and levels outputs.
The actual value of the pot itself does not affect the input to output voltage ratio, but it does alter the peak frequency of the pickup. If you want a brighter sound from your pickups, use a pot with a larger total resistance. If you want a darker sound, use a smaller total resistance. In general, 250kΩ pots are used with single-coil pickups and 500kΩ pots are used with humbucking pickups.

The guitar measures 41 inches in length, and it comes with a 25.75-inch scale and 20 frets for various playing techniques. You also get strong D’Addario strings for reliable performances every time, as well as enclosed die-cast gold tuners, so you never play an off note. This dreadnought guitar features a cutaway so you can easily practice finger techniques on the higher frets.


How to Adjust Amp Settings for the Best Blues Electric Guitar Tone. The tone settings on an amp are as important as the settings on the guitar for producing the blues sound. The amp settings are a personal style preference. Blues guitar has a distinctive sound and tone which can be enhanced by the amp settings. Focus on the drive and reverberation settings for a good full-bodied blues sound.

Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials; for example, a guitar may have a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft-grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.

×