The F-55 was identical to the F-50 except for the addition of a bridge DeArmond humbucker, plus the attendant three-way toggle on the cutaway horn and a second set of volume and tone knobs flanking the treble f-hole. The F-55, too, had a Martin “M” trapeze tail. This series began with guitar #279831. Some 1,700 F-55s were made from mid-’62 to the summer of 1965.
The modern "tone block" is a design-based marketing approach from EBMM starting in their guitars a few years back. It originally involved routing out an alder body, fitting a block of mahogany from just behind the bridge to the neck join and applying a top to the guitar. It is an alteration of the design and some purists believe they hear a difference in the tone of the guitar versus plain alder bodied or mahogany instruments.
The Super Strat, though modeled after the Stratocaster, is a very different guitar. Basically, the only similarity this guitar really has to its namesake is the body style. The pickups generally used in Super Strats are of a higher output (we’ll get into this in more depth, but for now just remember higher-output=more distortion), which makes them more suited for metal and hard rock. Super Strats also commonly have Floyd Rose tremolos, which allow for a great range of movement than a typical Fender Stratocaster Tremolo while still having a greater tuning integrity (you can use it more without the guitar going out of tune).
The rest seems like a bit of an odd ball selection. It's the age old argument of technique over substance. BB King puts more into a small handful of notes than Malmsteen does in several hundred. One of the most musical guitar players to have graced the earth. In fact I think it was BB who stated that it's not the notes you put in but the notes you choose to leave out that count. Now that's music.
The Chapman ML2's classic, single-cut body, two chrome-plated humbuckers and a black pennant headstock that’s not a million miles away from Gibson’s Les Paul. But appearances can be deceptive: this instrument is a very different beast. Chapman pegs its weight at a relatively svelte 3.5kg, so it’s unlikely to see you turning over your salary to the chiropractor. It’s also heavily contoured with its cutaway and heel carved for easy access to the upper frets. It has a modern, satin-smooth C-profile neck, hewn from maple (another deviation from the LP blueprint) and glued neatly to the body. The 25" scale lends it a unique feel - and with 24 jumbo nickel frets, the ML2 Modern is hugely shreddable. Both pickups feature an Alnico V magnet at the heart (think tight low-end, brightness, a little less on the mids), but with a coil-split, accessed by pulling up on the master tone pot, you can split the signal of these humbuckers for some single-coil snap and sizzle. The ML2 Modern makes a good claim on being all things to all guitarists. With coils split or not, we love its tone. That bridge ’bucker really sings with some gain. While the neck pickup is a great ‘rhythm’ humbucker - articulate and dynamic. Whether you find the modernity in its versatility, or in a feel that’s more Jackson than Gibson, the ML2 Modern sure lives up to its name.
I have a sunset hellraiser fr. I have been playing for 8yrs and it is by far the best guitar I have ever owned or even played. Next to the ltd models that I was considering the schecter had better quality, feel, and sound at almost HALF the price of the high end lts. The quality of the abalone inlays, the finish (black cherry), the original floyd, grover tuners, 24 fret rosewood board, incredible set neck (you would think its a neckthrough without checking the specs), and the coil tapping emgs is unbelievable. I could go on forever about this guitar's action, sound, feel, quality, looks... I have spent over a 1000$ on a few dif. Guitars and I will never do it again. Ex- zack wylde epi, 2 usa fenders couple mex. 1's, a gibson Linkin Park standard, ltd kh-602, and a really nice jackson dinky style(not sure model) with 3 carvin humbuckers coiltaped just to name a few. Hellraiser is better than all of them. I recommend any of the hellraiser guitars especially with coil tapping emgs.
Some of the energy is not translated to string movement because it is lost. Where? To the body. Dependant on hardware and body composition, certain amounts of frequencies are absorbed by the body and therefore lost to be seen by the pickups. Body resonance is the OPPOSITE of what most people think. Those prevalent frequencies you hear ringing out of the wood are now unavailable to be transferred to the pickups. Remember, we can't create energy, only move it around. If a guitar is prominent in specific frequencies, it is only because other frequencies have been "removed" to make them stand out.
The GK Studio mixes traditional flamenco construction techniques, a comfortable body shape and modern Fishman electronics, resulting in an easy to play nylon-string guitar that can be plugged in for stage use. My main concern about this guitar is its slightly thinner body depth, neck and nutwidth(1.96"), but these are calculated tweaks that should make this classical guitar play and feel more akin to conventional steel-string acoustics.
The company was founded in 1931 as the Ro-Pat-In Corporation (ElectRo-Patent-Instruments) by Adolph Rickenbacher and George Beauchamp in order to sell electric Hawaiian guitars. These instruments had been designed by Beauchamp, assisted at the National String Instruments Corporation by Paul Barth and Harry Watson.[1] They chose the brand name Rickenbacher (later changed to Rickenbacker), though early examples bear the brand nameElectro.[2]
In 1941, CMI became the national distributor for National Dobro products. In ’42, Victor Smith, Al Frost and Louis Dopyera purchased controlling interest in the company. By this time, however, the world was at war and almost all instrument manufacturing ground to a halt as all segments of industry converted to production of materials to support the war effort. In October of 1943, with builders in wartime hiatus, the new owners changed the company name to Valco Manufacturing, incorporating the first initial of each partner’s given name (V-A-L-Co).

This guitar is awesome. If you are on the fence, get off and buy it. It's beautiful and sounds awesome. I'd give it 10 stars if I could. The tone is so much better than my old acoustic. All mahogany I love it. Looking forward to years of getting better with this beauty. I have zero negative to say. Had it a few months have played everyday. I hate to leave it to go to work. Wish I had all day to play it.
If you mean the Guitar Hero III guitar then there are two switches on the back. The one just below the neck of the guitar (It looks like a quarter of a circle.) detaches the neck so you can store the guitar AND the neck in a smaller space, and the switch towards the side of the guitar detaches the faceplate so you can put a different faceplate on, or play without a faceplate.
Telecaster is considered to be the oldest solid body electric guitar in the world. Capturing that type of pedigree is not easy, but Squier managed to pull it off. Handling the Squier by Fender Vintage Modified Telecaster brought back some of the best memories of my youth, when Telecaster was the go to axe. This is definitely one guitar worth trying out.
Myths and Legends: Valve technology is intrinsically the most elegant means by which a speaker is able to reproduce music. This is not because valves have magical qualities but because the technology by which they function is not achievable by other means. In ten thousand years from now Valve amplifiers will possible be the only remaining technology from the 20th century that will be still be being used and loved with as much passion as when first invented. As much as there is no proof that Valve amplifiers can sound superior to solid state I for one if given the choice will only listen to music through Valve amplification.
They say good things come in small packages. Well, "they" weren't wrong! The Orange Micro Terror Guitar Amplifier Head is no bigger than a lunchbox, but packs enough power to stand up to some of the bigger amplifiers out there, especially when you connect it to a 2x12 or even a 4x12 cab. It features a combination of solid state and valve technology and throws out 20w of pure power thanks to the 1 x 12AX7/ECC83 pre amp valve. Easy to use, affordable and even easier to carry around, you can easily gig with this or use it as a practice amp at home when coupled with the custom built Orange PPC108 1x8 Closed Back Speaker Cabinet.
R9 is also the output resistance of the guitar, and together with R6, forms a high output resitance instrument. Now for perfect transfer of electrical energy we need a low output resitance, but this is not possible in this case. Hence, we need a pre-amplifier to convert the signal to be more friendly to other driving electronics, and eventually, speakers. This power transfer is unpredictable, so another element of the tone of the guitar is the (usually external, unless using active pickups) pre-amplifier. Generally, tube pre-amps are highly unpredictable and unstable, which is why many guitarists still prefer them, as they generate more harmonics == richer sound, but this gear may be counterproductive in certain environments where minimising electrical noise is crucial, as the fillament inside a tube creates a fair bit of electromagnetic interference.
Me got a Dorado resonator guitar, very nice dark walnut finish with white binding on edges. I bought it in 1985 but assume the guitar is mid-70's. Incidentally the neck has a very "japanese" feel to it. I was told by a guitar dealer that these particular instruments may have been ( at least partially) manufactured in Japan, then possibly had their resonators fitted in USA. They were DISTRIBUTED by Gretsch, in Europe at any rate. Mine is a nice guitar but not nearly as loud as most resonators.
I have been a musician for many years now. I have played in everything from metal bands to acoustic coffee house sets to worship/praise bands. I feel that with these many years of playing I have earned a sharp ear, no pun intended. By that I mean that I have developed an ear not only to hear pitches, tones, and notes, but I can also hear good and bad timbre. I feel that Taylor guitars simply produce the best timbre of any acoustic guitar I have played. Naturally, all of my acoustics are Taylor! With that, thanks to Bob Taylor for doing it best and doing it right the first time!
A good starting point when recording is to place the mic close to the grille and positioned over the centre of the speaker. However, it's worth moving the mic a little off centre if you're after a less toppy sound.Guitar amps tend to use 10-inch or 12-inch speakers without tweeters or crossovers, so they have a very limited upper-frequency response. These speakers may be used singly or in multiples, in either sealed or open-backed cabinets. The familiar overdrive sound was almost certainly discovered by accident when early amplifiers were driven beyond their design limits in an attempt to obtain more volume, but because of the restricted top end of the speaker systems employed at the time, the distortion was stripped of its more abrasive upper harmonics and actually sounded quite musical. So, what started out as a side effect of limited technology soon became adopted by blues players and turned into a distinctive style, which later evolved into rock, and then into heavy metal with all its spin-off genres.
The tone selector on an electric guitar controls the capacitor, which basically filters out high frequencies. The same way a high-cut filter (or low-pass-filter if you prefer) works on a standard equalizer. By dialing down the tone, you remove brightness and treble. The pickup selector does just what it's called.. Selecting which pickups being used to capture the vibration of the strings, and translates the energy into electric current, though the configuration and number of "presets" can vary from guitar to guitar, depending on how many pickups it has etc. If you're a handyman you can even configure this yourself.

If you are a first time builder or an experienced professional you know the value of building your instrument on a solid foundation. The Custom Shop Jag body is beautiful, high quality and made to spec. The Allparts neck is manufactured under license by Fender. The materials and quality level meet the standards set by Fender. Using these high quality materials will give you the sweet tone and sustain you are looking for.
{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: signal processors","pageName":"[gc] shop: pro audio: signal processors: multi effects processors","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: signal processors","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"multi effects processors","prop5":"[gc] shop: pro audio: signal processors: multi effects processors","prop6":"[gc] shop: pro audio: signal processors: multi effects processors","prop3":"[gc] shop: pro audio: signal processors: multi effects processors","prop4":"[gc] shop: pro audio: signal processors: multi effects processors","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
:I need to know how to get parts for my old kent guitar.I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.
In 1959, the Special was given the same new double-cutaway body shape as the Junior and the TV received in 1958. However, when the new design was applied to the two-pickup Special, the cavity for the neck pickup overlapped the neck-to-body joint. This weakened the joint to the point that the neck could break after only moderate handling. The problem was soon resolved when Gibson designers moved the neck pickup farther down the body, producing a stronger joint and eliminating the breakage problem.
Lou Pallo, a longtime member of Les Paul’s performing trio until the virtuoso’s death in 2009, earned a signature Les Paul model in late 2010. Nicknamed “The Man of a Thousand Inversions,” Pallo played a Les Paul Custom in the Les Paul Trio. However, the Les Paul on which he consulted for its design features a Standard headstock and body but Custom fretboard block inlays including at the first fret. The body wood is natural-coloured mahogany while the top is ebony-painted maple and bound in single-ply binding like the production Standard. The guitar features, unusually, a black-covered P-90 single-coil pickup at the neck—the same pickup that was standard on the Les Paul from 1952 to 1956—and a double-coil Dirty Fingers pickup without a cover but with a black pickup frame at the bridge. The familiar “rhythm/treble” poker chip around the toggle switch is also black, and the guitar features no pickguard. (Interviewed for the guitar’s introduction, Pallo himself said he had actually wanted the guitar to feature a cream-coloured pickguard, cream-coloured Dirty Fingers frame, cream-coloured P-90 cover, and cream-coloured poker chip.) The Lou Pallo model also features a small reproduction of Pallo’s signature in the twelfth-fret inlay. Pallo introduced the guitar at New York’s Iridium club, where the Les Paul Trio played for many years. Pallo explained for a video of the event that he rejected Gibson’s original idea to put Pallo’s signature on the headstock, out of respect to his old friend and partner, suggesting the inlay signature in its place. After introducing the guitar to the gathering, Pallo played the jazz standard “Begin the Beguine” on the instrument.
Most reviewers are simply floored by how good the Roland Blues Cube Artist sounds right off the bat, with many commending its organic tube-like tone for being so life-like. It's vintage aesthetics and familiar controls also gets a lot of thumbs up, especially from experienced players who are in it for the sound, and not for the bells and whistles. It should also be mentioned that there are many reports of it working well with different types of guitars and pickup configurations.
I heard off of a great guitarist years ago when I asked him about fender and gibson he said they were expensive and not great and also said the Gordon Smith guitars played and sounded great and as they never advertised and were a small builder in the uk the cost was cheap for the quality of the guitar. A players guitar rather than a fancy looking guitar thats all show and less go. I think they are the price of a mim strat but great hardware not chinese.
Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
{"id": "113478791", "categoryId":"site5ABA", "name":"Vintage 1967 FT90 El Dorado Acoustic Guitar", "pageUrl":"/Used/Epiphone/Vintage-1967-FT90-El-Dorado-Acoustic-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"2,099.99", "priceMin":"2,099.99", "priceMax":"2,099.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"200.00", "priceSavingsMaxPercent":"20,000", "inventory":"1", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMID,site5LAAB", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"754513965000", "priceVisibility": "", "itemType": "Vintage"}
I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?
Though this decision can be based on preference, we think the best guitar for a beginner is the acoustic guitar. Classical guitars have a wider neck, which can be hard for younger students or physically smaller individuals to handle when learning guitar chords. Meanwhile, the electric guitar is designed to be played with an amplifier, which comes at an additional cost. Acoustic guitars are simple and require little to no additional equipment, making them ideal for beginner guitarists.

The two most prominent electric guitar brands overall are Fender and Gibson. Although you won't find guitars with those labels on the headstock in this price range, both of them have sub-brands under which they sell their entry level models: - Fender owns the Squier brand and Gibson owns the Epiphone brand. Other well-known brands that have guitars in this price range include Dean, ESP, Ibanez, Jackson, Kramer and Yamaha and Washburn.
Though modulated delays are essentially effects, the need to balance the dry and delayed sounds as a means of regulating the effect strength means that using these devices via insert points makes them much more controllable than trying to use them in an effects send/return loop. If you do use them as a send effect, you can achieve this balance by automating the send level.
Featuring classic Fender design, smooth playability, and simple controls, the Squier Classic Vibe Telecaster '50s is a great first electric guitar. The fixed bridge and quality tuning machines ensure simple and reliable tuning stability—a potential frustration for new players trying to learn on poor quality guitars. Single volume and tone controls along with two bright-sounding single-coil pickups give the beginning player a wide range of tones that are easy to control. The Telecaster has been a mainstay in music for decades and is especially associated with great country, pop, surf and rock sounds.

Dobro – we’re still in Dobro territory here, not National – quickly followed suit in 1934 with the Dobro Electric Resophonic guitar. This was basically a wood-bodied Dobro resonator guitar with a Stimson pickup just in front of the handrest. Unlike the All-Electric, this had the poles perpendicular to the strings. This also did not especially go over, and dropped from sight before the year was up.

This acoustic guitar model has been over the time well renowned as the best selling in the UK. This is owed to its high value and sound quality, accompanied by its trendy design and ease of use. It has a shortened scale length that makes it easy to play, even for beginner guitarists. It mostly comes in a warm natural color and is for the right handed guitarists. It is quite affordable, with prices ranging from around INR 8900. You can click below to find more product details on the official link.
Gibson 2012 SG Special '70s Tribute Electric Guitar, Left-Handed (with Gig Bag)   New from$649.00In Stockor 12 payments of $54.09 FREE 2-DAY SHIPPING Gibson 2017 SG Faded Electric Guitar, Left-Handed (with Gig Bag)   New from$659.00In Stockor 12 payments of $54.92 FREE 2-DAY SHIPPING Gibson 2017 Les Paul Standard Electric Guitar, Left Handed (with Case)   New from$2,299.00In Stockor 12 payments of $191.59 Free Ground Shipping Gibson 2019 LP Junior Tribute DC Electric Guitar, Left Handed, (with Gig Bag)   New from$799.00In Stockor 12 payments of $66.59 Free Ground Shipping See All Left-Handed Electric Guitars
Rule 4 – Taking sound-making devices like stompbox pedals out of the equation, there’s an order to the way sounds naturally occur in physical space. For example, guitar amp distortion is made in physical space by turning an amp up enough to cause its circuits to overload, and any echo you might hear happens after the distorted sound hits walls or ceilings and bounces back to your ears. Therefore, logic says that your reverb and/or delay pedals should be last in the signal path, since that is how the sounds they produce actually occur in three-dimensional space.
Guitar FX BOX is acting just like a good collection of analog effect pedals. Just plug your guitar into the sound card input and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice, and other inputs real-time - I/O delay is really low, almost undetectable. This is achieved using DirectSound, WDM streaming or ASIO for fast access to the sound card hardware and special DSP algorithms optimized for real-time processing. Besides high sound quality, Guitar FX BOX features intuitive user interface, supports presets and hot keys for quick presets changing, MIDI/Game controllers pedals, configurable tuner, metronome, file input/output. Currently included effects: Overdrive/distortion, Amp&Speaker cabinet simulator, Echo, Pitch shifter, Reverb, Wah-Wah, Chorus, Tremolo, I/O Equalizers, Dynamic compressor, Phaser and Volume swell.
The best place to start is with a small tube amp. This kind of amp is far less forgiving, leaving you nowhere to hide. It sounds counter-intuitive, I know. You’re looking for the best choice and here I am telling you one that will make things more difficult. But think of it as tough love – forcing you to confront your technique and learn the right way to play a chord or scale progression.
My purpose for the visits were neither to buy, nor to have repaired, an instrument. It was to have the proprietor take a look at the bass that I had build. To give me his opinion and estimation on how I did. He walked through the process I'd used, for defretting, paint stripping, and then staining and poly sealing. Demonstrated how to adjust the truss rod, and complimented me on the work I'd done.
Like most things involved with creative pursuits like making music, there isn’t a steadfast right or wrong way to do things, but if you encountered any of the problems above you’re definitely doing things wrong (unless you play in a German nihilist industrial noise band, in which case, go nuts). This article will help you avoid those scenarios by describing some of the basic rules and suggestions for placing different effects in the ideal order in your rig’s signal chain and how to achieve the best possible tones when using several stomp boxes together. If you’ve ever wondered how to put together your own pedal board, this info will give you a good start toward obtaining the best sound and most versatility out of your rig.
Reverbs and delays can sound particularly unruly when run into an amp set dirty. If you use natural amp distortion but still like using pedals, you can run some effects into the front of your amp, and run time-based effects into an effects loop (most modern amps with channel switching will have an effects loop). Some modern programmable pedals, such as the TC Nova System or Eventide Time Factor delay, allow you to switch between -10 and +4 operation, so you can use them in front of your amp at the instrument level or at line level in an amp effects loop. This is really handy, allowing you to create and store presets tailored for using the pedal either in front of the amp or in the loop. Of course you can also use studio-type rack effects in amp effects loops. Units such as the Fractal Audio Axe FX and TC Electronic G-Major work great in this configuration, allowing you to store many presets and get pristine time-based effects, whether you are using clean sounds or dirty sounds.
While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally. (more...)
Nothing says rock and roll quite like an electric guitar—and whether you're just learning to play or you've been practicing for years, the right instrument can make you feel like a rock star. Selecting the right match for you is a matter of personal taste and playing style, but the broad selection available at can help you find the guitar and the accessories you're looking for.
Passive pickups are similar to internal microphones that essentially just pick up the vibrations and soundwaves and send it straight to the amp. You bypass the need for a preamp that means you typically lack the ability to enhance, shape, and change sound and tones. Simply put, if you just want the ability to plug in for acoustic goodness, a passive pickup is a decent device. However, if you want to achieve more controlled volume and other features, you’re going to need to install a preamp at some point or simply opt for a guitar with an active pickup.
Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you’re looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.

Last fall, Ubisoft released a new version. But Rocksmith 2014 is considered a replacement rather than an update: The company is trying to rebrand the franchise not as a game but as a teaching tool. The box bears a fat label proclaiming "The fastest way to learn guitar," and Ubisoft launched an ad campaign promising that Rocksmith 2014 could teach prospective shredders to play guitar or bass in just 60 days.

Fender has a long history of building amplifiers, so much so that many of the amps we see today still mimic the look and aesthetics of the amps that they built many decades ago. You could also say that many of the amps we have today can trace their roots to the classic Fender amp design. Also impressive is the long list of Fender amplifier users which include Eric Clapton, Jerry Garcia, Brian Setzer, Neil Young, Stevie Ray Vaughn, Eddie Van Halen and many more. For a company with a long legacy and a massive line up of amplifiers, maintaining high rating across the board is quite the feat, but then again, this is to be expected from the company that helped shape the electric guitar sound that we know today. These days, Fender is well represented in the entire amplifier market, from entry level models with amp modeling, to premium modern reproductions of their iconic tube amps.
Now, there are some basic terms in the electric guitar lingo that you need to be aware of. Below are some of the terms that you need to know before you go out and research about different electric guitars. But if you are musically inept, there are some ways you can compete with the guitar guy. If you learn some points about the electric guitar, such as terms and mechanics of the instrument, you can impress your friends and possibly even will be the guy holding the guitar at your next dinner party.
American Fenders and USA Gibsons are not NOT for beginners! They are for people like myself who have invested 15+ years into developing the skills required to defend a purchase of one. IF you want beginner guitars, go see Mexico Fenders or Epiphone Guitars. Better yet, worry more about your skill and not which brand in on your headstock. I played for 11 years before I upgraded my Epiphone to a Gibson.
The stringed, chord-playing rhythm can be heard in groups which included military band-style instruments such as brass, saxes, clarinets, and drums, such as early jazz groups. As the acoustic guitar became a more popular instrument in the early 20th century, guitar-makers began building louder guitars which would be useful in a wider range of settings.
Manne guitars - This Italy based guitar manufacturer produces instruments with unique features. The first Manne guitar was built in 1986 and they continue to provide finely crafted instruments based on some very original design concepts. Manne's design philosophy: hand craft the finest stringed instruments then offer them to the public at a reasonable price.
Remember when I said that there were 2 amps widely used as practice amps and tools for guitar tech’s? Well, the Orange Micro Crush Mini Guitar Amplifier Combo is the other one. Warm ups before gigs, during set ups and maintenance work, this amplifier is relied upon to provide accurate sound and incredible tone anywhere, anytime. This is one of the best cheap amps available thanks to the fact it’s made by one of the most respected amplifier manufacturers in the world, powered via 9V battery and busts out some seriously amazing clean and dirty sounds.
My father's Yamaha was bought in the 90's, and was the first guitar steel-string I ever played as a kid. (If you were curious its equivalent to today's model would be the LS6 ARE). To this day I still find myself going back to it. It's little quirks makes it really special, even though I have martins and taylors and even gibsons. There's little nicks and chips in the paint in some places, which really shows it's history. It's also stood the test of time. It still plays great after almost 30 years of being lugged around from place to place, dropped, hit against walls, etc. It's just simply great. - zabathy1
The Zoom G3X features a built-in wah-wah expression pedal that controls the sound parameters in real time. It has over 100 effects and 22-amp models that bring out the amazing sounds of your guitar. This distortion pedal also features a stompbox with over 100 stage-ready effects. For computer recording, this pedal has a USB audio interface for Mac and PC. In addition, it has a balanced line-level output, an onboard chromatic tuner, and an integrated drum machine. Its 40-second looper gives it overdubbing capabilities.
Although electric guitar sounds vary dramatically, they are all essentially midrange instruments with little or no extreme high- and low-end information. With the tone controls on the amp and the guitar itself, recorded electric guitar sounds often need little in the way of EQ if the desired tone was produced at the recording stage. However, if the sound needs a bit more bite, try boosting the upper mids somewhere between 2.5 and 5kHz. For added warmth, a little boost around the 250Hz range should thicken the sound, while muddiness is often dealt with by cutting a few dBs at around the 200Hz mark.
Semi-hollow designs are similar to hollow-body guitars, but typically feature a thinner body with a central wooden block inside. This helps to control feedback while giving the instrument some of the same tonal characteristics as a hollow-body. This type of guitar has been used successfully in just about every genre of music, with the exception of extreme metal.
Paul Landers, of Neue Deutsche Härte band Rammstein has a signature guitar based on his custom-built guitar. It features a mahogany body with a maple cap finished in satin black with silver binding only around the front of the body. The neck is also made of mahogany and features an Obeche fingerboard with no inlays or binding. Hardware includes a hardtail tune-o-matic bridge and Grover locking keystone tuners. The guitar also feature chrome-covered EMG pickups; an 81 in the bridge, and a 60 in the neck. It also only has a single volume control and a 3-way pickup toggle switch.
With Apple including their Guitar Amp Pro plug‑in in Logic, Sonar coming bundled with Native Instruments' Guitar Rig, and Ableton adding their new Overdrive plug‑in to Live, guitar‑slinging Cubase 5 users might initially feel a bit left out. But you don't have to, because you can assemble some pretty amazing 'guitar racks' in Cubase: it's just that Cubase takes a more à la carte approach, where you need to draw on the existing effects as if they were stomp-boxes. A VST audio channel in Cubase offers inserts for up to eight series effects, including an amp simulator, so you actually have more options than with many pedalboard setups. Furthermore, you can add some quality 'studio effects', like the new Reverence reverb, as send effects. So think of Cubase as 'virtualising' a pedalboard, then bringing it into the studio so that its output can go to studio rack processors.

If you have any comments about what you see in this web site,  we would love to hear from you.  Our E-Mail address is below.  Of course we are particularly anxious to talk to you about our repair services or our handcrafted guitars.  But  --  don't let that limit you.  We would love to hear your ideas about any guitar related topic.  (One such e-mail led to the harp guitar project)   We WILL respond, generally quite soon.    If you have a question that you would like to see addressed in our Q& A page, let us know.  Our E-Mail Address is:

Of course, as guitar players we still want to remain open to a number of tonal aspects that happen after the front end of the initial attack. These elements aren’t necessarily in the front part of the very beginning of a guitar tone, nor are they delegated to the trail of lingering sustain. “The reason why people sound a certain way is because of little nuances, those little pull offs, those hammer ons, those plucking [dynamics]— the sequence of those things. Think of it as a sonic palette. That sequence is what makes the artist sound like himself.”
As for Acoustic guitars go, you are somewhat limited by the make and model of the guitar. You can make differences in tone by the type of picks you use and also the thickness of your strings. Actually the string factor goes for both electric and acoustic. The thicker the strings the fuller the tone. Its kinda whatever you can stand on your fingers. I like to use 11’s. Stevie Ray Vaughan used crazy thick gauges of strings and had an incredible tone. Bottom line…you have to try different things and experiment to find the right tone!
In a nutshell: Lowell Kiesel is the name of the guy who founded Carvin. He originally sold guitars under his own name, but later changed the company name to Carvin, a melding of the first names of his two sons. So, when Carvin changed the name on their guitars to Kiesel, they were actually reverting back to their roots. Kiesel is Carvin, and Carvin has always been Kiesel.
Stripped holes: small holes without much tension on them (i.e. pickguard screws) can be repaired with super glue (gel stuff). Put some glue in the hole and screw the screw in about 1/2 way. The glue will not stick to the plated screw, and will form threads. More severely stripped holes or holes w/ more tension on them (i.e. strap button screws) require pieces of toothpick be glued in w/ wood glue. Larger holes w/ alot of tension (i.e. neck mounting screws) require the hole be drilled out and a hardwood dowel glued in place.
Because of stiff competition in today's low-end market, guitar companies are constantly trying to outclass each other by improving the quality and value for money of their instruments. One brand that consistently tops in terms of sales and feedback is Epiphone, a sub-brand of Gibson that specializes in quality mass produced guitars. The DR-100 is a great example of their impressive ability to balance quality and affordability, garnering nearly perfect positive feedback for its build quality and sound.
Created four identical test rigs out of scrap wood from my workshop. They are all 725 x 35 x 47 mm in size, and weigh 651 grams (Alder), 618 g (Koa), 537 g (Swamp Ash), and 818 g (Zebrano). They obviously don’t exactly mimic a guitar, but should for the sake of the test resemble the type of tensions and forces that a guitar body with a neck is subjected to.
POWER – amps are created for amplifying the sound (duh) in the first place. Of course, nowadays amps are these versatile things that can do pretty much anything but cook you a scrambled egg (maybe SOON?). But power is expensive. This might sound like some deep statement I make as I look into the sunset but what I mean is wattage is not a cheap thing to come by. That is why most inexpensive models or practice models (which are often the same) do not have a lot of wattages. While this might be disheartening, trust me, as a beginner you won’t need a lot of watts. I mean unless you are a prodigy you will be spending a lot of time practicing on your own whether it be in your room, basement or wherever. You won’t be needing the wattage that much unless you are playing with other instruments or on stage. AND if you are going on stage, then you should be great enough not to need a practice amp, in the first place.

Use the numbers on the tab to fret spaces on the neck. Unlike normal musical notation, guitar tabs don't tell you which notes to play. Instead, they tell you where to put your fingers. Numbers on the lines correspond to frets on the fretboard. Each number represents a specific fret on the line it's written on. For instance, a "1" on the bottom line means to fret the first fret of the lowest string and play that note.
I don't have enough good things to say about this shop.  Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings?  Well, this ain't that shop.  James, the owner,  is super helpful and knowledgeable, and stocks his shop with really top quality gear.  I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection).  That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well.  
Strongly influenced by Stevie Ray Vaughn, Albert King, and Johnny Winter, Garrett is also a longtime fan of Lynyrd Skynyrd’s Allen Collins. Following the path that led Collins to his biting, cutting tone, Bo plays the same type of guitar as the Skynyrd legend, and gets tremendous versatility from his Gibson Firebirds. Incidentally, Winters and King are also notorious Firebird pickers. Bo says that his Firebirds (one of which is a rare collectible) allow him to go from nasty drive flavors to cleaner, Strat-like tones when he needs them.
Engineers invented the first loud, powerful amplifier and speaker systems for public address systems and movie theaters. These large PA systems and movie theatre sound systems were very large and very expensive, and so they could not be used by most touring and gigging musicians. After 1927, smaller, portable AC mains-powered PA systems that could be plugged into a regular wall socket "quickly became popular with musicians"; indeed, "...Leon McAuliffe (with Bob Wills) still used a carbon mic and a portable PA as late as 1935." During the late 1920s to mid-1930s, small portable PA systems and guitar combo amplifiers were fairly similar. These early amps had a "single volume control and one or two input jacks, field coil speakers" and thin wooden cabinets; remarkably, these early amps did not have tone controls or even an on-off switch.[1] While we do know that these late 1920s portable PA systems were used by guitarists and singers, it is not known whether upright bass players used these PA systems.
Excellent information. There is so much more to discuss on this topic. I built an Explorer shaped guitar with Strat hardware and humbucking pickups. I love the dive bombing note bends and the fat sound of humbucking pickups. I used Koa for the body and the neck came from a '70's Hagstrom electric. REALLY, thin neck. Read about guitars. See what artists like to play and why. Then fit it to your needs / wants. Brian May's Red Special uses wiring techniques I never heard or thought of. And he and his Dad made that guitar. Les Paul invented the guitar with the same name. Read about him and what he wanted. The ideas are out there to expand on. My Les Paul has 2 volume controls and a common Bass and Treble control. Different way of thinking. And it works for me.
Revamp the entire company staff from the C.E.O. down to the lowest level managers. Give workers raises. Treat them like human beings. Be nicer and friendlier. Reduce stress levels and not have such a toxic atmosphere. Make the daily numbers actually feasible and actually attainable without having to work 15 hrs. to achieve them. Have accountability on all levels - checks and balances- from C.E.O. down to lower management. Recognize the workers are human, and not robots!
Electric guitars are the easier to play as compared to acoustic guitars. But only because the chords are easy to play, that much force is not required to hold the chords as well as strum the chords. So it would better if you first practice the chords and the strumming on an acoustic guitar. The song Yellow by Coldplay, mentioned below, is considered as one of the best guitar tabs for beginners.

Are you a seasoned player looking to upgrade you instrument or a beginner starting to learn the ropes and tricks of playing a guitar? Well, in this article we have prepared a comprehensive guide on how to select the best electric guitar as per you needs and the list of the best electric guitars available in India. The guitar is a complex musical instrument with some basic components, a wide range of features and different constructions, so it is important to have some basic idea about these features so that you can make an informed choice.
Bassists who want a more powerful low end may use a subwoofer cabinet. Subwoofers are specialized for very low frequency reproduction, with typical maximum useful high frequencies of about 150 or 200 Hz, so a subwoofer cabinet must be paired with a full range speaker cabinet to obtain the full tonal range of an electric bass or upright bass. In addition, subwoofers intended for PA system use have much higher power handling requirements than do subwoofer designs for high fidelity home use. Bass guitar players who use subwoofer cabinets include performers who play with extended range basses with include notes between B0 (about 31 Hz); and C#0 (17 Hz) and bassists whose style requires a very powerful sub-bass response is an important part of the sound (e.g., funk, Latin, gospel, R & B, etc.).

Flanger – a time-based effect likened to the sound of an aeroplane taking off and landing. The “whooshing”effect is created by feeding the output of the guitar tone back in on itself with a very short delay (usually less than 20 milliseconds) causing comb filtering (boosts and cuts along the frequency range). The delay time is then varied which causes the comb filter to move up and down the frequency range.

In music, a guitar chord is a set of notes played on a guitar. A chord's notes are often played simultaneously, but they can be played sequentially in an arpeggio. The implementation of guitar chords depends on the guitar tuning. Most guitars used in popular music have six strings with the "standard" tuning of the Spanish classical-guitar, namely E-A-D-G-B-E' (from the lowest pitched string to the highest); in standard tuning, the intervals present among adjacent strings are perfect fourths except for the major third (G,B). Standard tuning requires four chord-shapes for the major triads.
I have had an old beat-up non-functioning norma electric archtop (hollow body) since i was 13(in 1984). A friend gave it to me and said i could have it if i could fix it... well like 20 years later i fixed it! and had the electrical redone for like $60.00. it needed some new parts (basiclly EVERYTHING) but i really wanted an archtop and knew i could fix this one up to sound pretty cool.... what i have found out about these guitars is that they really arent worth anything... i thought this one may have been from the late 50's early 60's so i may be worth something.. but as it turns out most people i have talked to about restoring it says its not worth anything that they were just little copies made in the 50's-60's and bought in the US at probably sears or something.... oh well I DONT CARE i really like it and its made well, so for the sheer vintage look and great feel I LOVE IT!-jj
While we are on the subject of cute little things, I want you to consider the idea of a small amplifier with a cute name but with the looks of Marlon Brando in his early years. Wait, no, that is incredibly freaky and not something anyone wants to imagine. I mean how would you even connect your guitar to that? What I mean is imagine an incredibly handsome amplifier. Well, now that you have, let me ruin your dreams by directing your attention at the pignose 7-10 legendary portable amplifier, which is an actually rather handsome piece of equipment. The great thing about this beautiful box is that it also has a great sound, comparable to that of its betters (read: of the more expensive models). Being very light and fun to possess, it is highly portable and loud enough to captivate audiences. A great, affordable small amplifier that does not look Marlon Brando in any way, and thank god for that.
Durability: Unlike individual stompboxes where you might use some sparingly, since your multi-effects unit contains all your effects you’ll be using it frequently. As such, it’s important that the build quality is up to par. This is where brand reputation comes into play as well, since you want the brand to stand behind their product in case anything bad happens. Rest assured the pedals we recommend in this guide are all from very reputable manufacturers with long histories of good customer support.
Seagull acoustic guitars are among the best values you are going find. They’re made in Canada, and there’s an attention to detail and craftsmanship here you may not expect in guitars at these price points. The Seagull Artist series is the top of the lineup. You’ll find unique tonewoods and high-quality construction techniques at an affordable price.
Scott Baxendale has been building custom hand made guitars since 1974. Recently he settled in Athens Georgia where he is currently building custom guitars, restoring vintage guitars and teaching the art of lutherie to aspiring craftsman. Scott Baxendale’s legacy of building custom instruments began in 1974, when he arrived in Winfield, Kansas to work for […]

Serial #59640 New York label Epiphone Triumph circa 1949. Blonde finish. Spruce top, tiger flame maple sides and back. Cherry neck with diamond mother of pearl inlay. Small nick less than an inch wide on left front. Original Frequensator tailpiece with nickel finish, partly worn. Grover tuners fastened with screws and glue. Edging on back body has .25” gap at connection.Blonde natural lacquer finish in good condition. Glossy and brilliant color. Shipping quote inside US only. Ask for quote outside the US. 

The Very Best Rock Vocalists All-Time Best Rock Frontmen Greatest Drummers Insane Rock Rumors That Are Actually True Druggiest Rock Stars of All Time What Their Kids Look Like Now Incredible Songwriters The Rockingest Women Singers Undeserving Members of the Rock HoF Great Guitar Rock Albums All-Time Best Rock Bassists Our Rock Hall of Fame Nominees Huge Stars Who Stepped Out of the Spotlight Old Rock Stars Who Still Look Pretty Good Rock Guitarists of the 1970s Rock Stars in Love Triangles The Greatest Living Rock Songwriters Mononymous Singers Greatest American Rock Bands Rumors That Were Never True

Two and one half steps down from Drop D. This tuning is most often used by death metal or deathcore musicians, such as Suicide Silence or Whitechapel (both use seven-string guitars and tune down the seventh string a full step). Utilized by bands like Nile, Motograter, Thrice, Filter (on the songs "Columind" and "The Missing" from The Amalgamut and "Drug Boy" and "The Trouble with Angels" from the album of the same name), Dead by April, RED, Ill Niño (on Dead New World) and occasionally Slipknot, Crowbar, Amon Amarth, Five Finger Death Punch, and Parkway Drive. Trapt uses this tuning on their songs "Hollow Man" and "Waiting".

Rule 3 - Experimentation occurs within these groups of effects. While these three major groupings need to follow a strict order, the effects within those groups can be toyed with to invent new sounds. For instance, you can apply a reverb to your echo delay or apply an echo to your reverb. But that general group of time-based effects needs to come at the end of your effects chain, regardless.

In jazz big bands, popular during the 1930s and 1940s, the guitarist is considered an integral part of the rhythm section (guitar, drums and bass). They usually played a regular four strums to the bar, although an amount of harmonic improvisation is possible. Freddie Green, guitarist in the Count Basie orchestra, was a noted exponent of this style. The harmonies are often minimal; for instance, the root note is often omitted on the assumption that it will be supplied by the bassist.

Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.
The Les Paul Triumph bass, like the Les Paul Recording guitar was first shipped in 1971, but was based on a slightly older model, the 1969 Les Paul Bass. Functionally, these basses were very similar, although the Triumph did offer low and high impedance operation, without the need for a transformer cable. This owners manual details the basses specifications, suggests a string set, recommended action, and suggests a series of tonal settings for rock, country and solo bass playing.
Bassists can put an incorrect (that is too low) impedance load on their amplifiers even if they connect multiple speakers that are at the correct impedance rating. For example, if a bassist has a combo amp in which the power amp is rated at 4 ohms, and she/he plugs in a second 4 ohm speaker cabinet in parallel, this will drop the impedance ("load") on the amplifier down to 2 ohms, which is too low for the amplifier. When speakers of different impedance are wired up together (e.g., an 8 ohm speaker cabinet and a 4 ohm speaker cab, the impedance is calculated differently). In most applications, when bass speakers are plugged into an amplifier, they are wired in parallel. The parallel "input/output" speaker jacks on the rear of most bass cabinets, when plugged into additional speakers in a "daisy chain" approach, will cause the speakers to be connected in parallel. More rarely, bass speaker cabs may be wired up in series, which means that the impedance is calculated differently. Series wiring is much more complicated and in cases where a bassist is using series wiring, a custom-made cabling system is typically used. Some bass manufacturers that build large speaker cabinets with multiple speakers may wire some of the speakers in series and some in parallel to achieve a certain impedance rating for the entire speaker cabinet (e.g., in 8x10" speaker cabinets, the speakers inside the cabinet may be all wired up in series, but the overall cabinet's "input/output" jacks are in parallel). Professional bass technicians and speaker designers setting up custom-made bass speaker systems for bass players from major bands may use an electronic meter to test the impedance of the speaker cabinets they design.

Chicago’s vintage guitar shop is located in Ravenswood just west of Lincoln Square. Rock N Roll Vintage is your one stop shop in Chicago for new guitars, vintage guitars, Chicago guitar lessons, guitar pedals, and we are currently the largest synth dealer in the Midwest. Looking for a specific guitar? Rock N Roll Vintage Guitar Shop carries Fender, Gibson, Martin, Gretsch, Rickenbacker and other popular guitars and basses including boutique amps. We have one of the largest selections of effects pedals in Chicago with many hard to find boutique pedal brands.
Hey this really helped thanks but I've got a real problem with the high E string. Its still flat and I've turned the little piece around and its as far back as it can go and its still flat on the twelfth fret. I heard that new strings might solve the problem but I'm worried that it might not and that I'll have a real problem trying to get it to intonate correctly. Hope you can help thanks a lot for this post! :)
What can we learn from these restaurant guests? The lesson is that we are very easily tricked into liking things we pay more for, even though they might not be that good after all. We get a particular feeling from thinking that we’re treating ourselves to something luxurious. If we, on the other hand, haven’t spent very much, we usually assume that it can’t be a good product.

Wife wants to play guitar again after a long hiatus. My full sized Takamine with fat strings is too big and heavy for her. Got her this 3/4 Yamaha and I fell in love with it. I may have to get another one for her because I've been hogging it. It has a great voice for a 3/4. The action is nice, the built in tuner is a real treat. Never had one before but it is unbelievably convenient. I don't plug it in often but I had to check out that sound too. The electronics sound decent. Can't crank it up too loud or it starts to feedback, but I'm actually sitting right on top of my small but punchy VOX amp so I can't really say how it would work for playing out. The reviews convinced me to buy this one. The best review only had one major complaint; the tuning pegs. I agree they could be better, but I don't think they are awful. I have to tweak the tuning just a little once or twice a day before I play, but it isn't like it goes out of tune when I'm playing, even when I'm beating on it hard. I think it is well worth the price and was surprised by the volume it produces. Much better than expected. If you don't find the tuning pegs worthy, I think the instrument is good enough to spend money on for an upgrade, but I don't plan to. It is solid, light weight, comfortable, nice sounding, well designed, feature rich and handy. I'm keeping it in the corner by the bed and I pick it up every chance I get. I haven't played guitar much the past few years so having a guitar at my fingertips all the time is helping me get my callouses back quickly. No matter what you play, if you lose your callouses, rebuilding them is always painful for a few weeks, but this instrument is pretty easy to play. I've gone through the process several times over the years with my Takamine. This is far less painful. Perhaps that means it will take longer, but at least I can still use my fingers to type long reviews in the meantime. No avoiding the pain regardless of what you play, but there is pain, and there is agony. This guitar hits a sweet spot somewhere in between. It's just right for young or old, big or small. (FWIW, I heard an interview with Clapton where he confessed he doesn't play much when he's not working and when he has to prepare for a tour, even he has to go through the callous building process). Well, I'm way off topic now. Again, great little guitar. Go for it.
Trim:  Heel cap: ebony. Fingerboard: ebony bound in white celluloid with scalloped lower end; 24 frets under A and D, 21 nickel-silver frets under G and C; single abalone dots behind 5th, 7th, 9th, 10th (slightly larger), and 15th frets; double mother-of-pearl dots behind 12th fret. Nut: bone. Bridge: mahogany capped with ebony; nickel-silver-plated steel screws to adjust bridge height and pickup contact. Tuners: six nickel-plated steel, worm-gear machine tuners by Grover with convex head surfaces and decoratively cut plate outline. Endpin: black bakelite; extends through tailpiece. Pick guard: imitation tortoise shell plastic raised on wood brace affixed to top with two steel dome-headed screws. Lacquer: dark orange-brown sunburst.

Fender was started by Leo Fender in 1946 in Fullerton, CA. Leo Fender sold his company to CBS in 1965. In 1985 Fender employees purchased the company. Leo Fender founded Music Man in 1975, and later founded the G&L Musical Instruments company. Fender brands currently include brands include Fender®, Squier®, Guild®, Gretsch®, Jackson®, Charvel®, EVH®, Tacoma…

The ’37 Hawaiian Guitar in both the Sorkin and Grossman books was basically the same squarish, pear-shaped guitar as in ’36, sans pickguard. It had a polished Ebonoid fingerboard with new parallelogram position markers replacing the old dots. Also, the large, two-part rectangular pickup cover/tail assembly was replaced with a more conventional, modern design. The pickup cover was the new rectangular type with the two pole extensions exposed. Off to the side of its surround was a little square plate on the treble side containing the volume control. The strings attached to a small piece of slotted metal hidden under a rectangular cover or “handrest.” Gone were the control wings. The microphone attachment stuck out the bass side of the guitar. The cost was $35, plus $6 for a case.
Also included was the GP, an equal double-cutaway model with a mahogany body, flamed maple carved top, glued-in neck, fine-tune bridge and stop tailpiece. The only models I’ve seen, which were also advertised, had twin humbuckers and conventional electronics. One source refers to a GP-1, which by nomenclature would suggest a single humbucker, but it’s not known if this ever actually existed. Also, it’s not clear if the GPs came in parts or fully assembled.
Dogwood Guitars is a full-service setup and repair shop. We are equipped to handle all of your acoustic and electric guitar adjustment and repair needs. The prices listed below are labor estimates and do not include parts such as new strings, bone blanks, fret wire, etc. I give free no-obligation evaluations of any guitar so that you can make an informed decision about your instrument and its care. Guitars are like cars; they need some routine maintenance to perform at their best.
Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.
The SIX6FDFM’s jaw-dropping aesthetics belie its price tag. It has an arched flame maple top on a bound mahogany body, a bound ebony fretboard, and a three-piece maple/purpleheart neck that has a colorful streak running down the middle. Only a Blue Space Burst finish is available, but, coupled with a matching headstock, it looks good enough to lick.
Rule 1 - There is a logical order for groups of effects. Some effects remove or add certain amount of frequencies, some change the basic shape of the audio waveform, and others react to the shape and amplitude of the waveform. Those are three main types of effects that logically can't come in any other order than they were just listed, or you end up with amateur results. The reason for that becomes clear in the next rules.
While there is absolutely no reason to go with "standard" if that's not what you prefer for a given instrument, I think it's safe to say that 10s (usually 10-46) are standard, since nearly every string manufacturer that uses such descriptors for their electric sets refers to their 10s as "regular." Ernie Ball Regular SLinky? 10-46. Fender Regular Whatevers? 10-46. D'addario Regular Light (note that there is no other, more REGULAR sounding name)? 10-46. Dean Markley Regular Blue Steels? 10-46...
Because of the high quality, Gibsons are among the more expensive models of guitars. However, Epiphone, of whom they are the parent organization, produces high quality guitars at much more affordable prices. These guitars are usually slightly inferior to their Gibson counterparts, but the playability and style are similar, and they are still a definitely among the good guitar brands.
:I purchased a Dorado Model 5990 in 1972 new and it was DISTRIBUTED by Gretch, made in Japan. This is a low price "starter" guitar that equals many higher priced brands. I can let it sit for weeks and it stays in tune. Age has mellowed the sound and it plays as well as any fender, Gibson, or even Gretch, of equal construction all things considered.
With that in mind, we need to point out something about this piece of content, and others like it that we have written: These recommendations are based on the knowledge and opinion of real musicians. We are not marketers or internet gurus trying to make a buck off Amazon. Now, we do use affiliate programs to support this site and those who run it, but we are not simply throwing pedals up without knowing why we're suggesting them. The point is to provide a proper context for your purchase, which we believe is the best way to make a sale, anyway.
Electric guitars vary greatly in sound, look and playability. Different designs, quality of craftsmanship, electronics and choice of woods make them sound, look and feel different from one another. It's the luthiers' goal to combine the best of these elements to create the next masterpiece. Our task is seeking and offering the finest tonewoods available to make that goal a reality.
This is an echo effect – every time you play a note it is repeated quieter and quieter, just like an echo. You can get a variety of different delay effects, from old-school “tape” echoes which are said to sound more natural, to analogue delay pedals and more modern digital ones. Digital pedals tend to sound clearer and a little harsher than their analogue cousins, making them more suited to modern styles such as modern metal.
It’s yet another Hal Leonard book (that guy really wanted you to learn to play), with the same audio perks as the guide above. This guide is perhaps a little over the head of most beginners, but if you grapple with it early, the rewards could be considerable. Fourteen scales across 96 pages means this isn’t an enormous volume of information to digest, so give it a whirl.
There are several good reasons why you might want to wire your Strat pickups in series. If you want more volume and midrange out of your pickups, the parallel/series switching may be the perfect option. As I mentioned, parallel wiring of two pickups is what you are used to hearing from a Strat. Parallel wiring adds transparency and clarity to the tone.
The double-neck guitar is designed so that two guitar necks can share one body. This design allows the guitarist to switch between either neck with ease. The double-neck guitar will normally have a standard six-string neck and a twelve-string neck. Other combinations, such as a six-string neck and a fretless neck, are available. The double-neck guitar may be used in live situations when a guitarist needs a twelve-string guitar for the rhythm part and a six-string guitar for the solo break.
This is a musical problem rather than a technical one. Guitarists engage overdrive when they WANT to dominate. That's fine, but don't do it ALL the time! Not if there's an acoustic guitar in the band and you want to hear it! Everyone needs to listen, everyone has to be aware that another player may have something interesting to play, and therefore make space for it. Like turn down or - horror - even stop playing for a bit!
Parts made for the Kay Vintage Reissues may not fit or lineup with the original and we do not guarantee that our part will fit your guitar. We do sell SELECTED parts and hard shell cases for the following: K161V Thin Twin, K775V Jazz II, K162V Pro Bass, K5970V Jazz Special Bass, K1700V Barney Kessel Pro, K6700V Barney Kessel Artist and K8700V Barney Kessel Jazz Special.
By the 1960s and 1970s, semiconductor transistor-based amplifiers (also called "solid state") began to become popular. This was in large part because for a given wattage level and feature level, solid state amplifiers are less expensive, lighter weight, and require less maintenance than tube amplifiers. As well, transistor amplifiers are more reliable and less fragile than tube amps. In some cases, tube and solid state technologies are used together, usually with a tube preamplifier driving a solid state power amplifier. There are also an increasing range of products that use digital signal processing (DSP) and digital modeling technology to simulate many different combinations of amp and cabinets.
The godfather of all that is sought after in rack gear; behold, the Soldano SLO Rackmount Amplifier. Those of you that have heard of the SLO (Super Lead Overdrive) already know that this thing can be brutal when it comes to lead tones. Possessing one of the tightest crunch and overdrive channels known to man, the SLO Rackmount is hailed as a grail piece of gear for many guitar players. The SLO-100 offers two channels, Normal and Overdrive, each with independent Preamp gain and Master Volume controls.  A footswitch is also provided for effortless noise-free switching between the two channels.  The Normal channel has a Bright switch and a Clean / Crunch gain selector switch.  Standard features include a tube-buffered effects loop and a slave output.  Bass, Middle, Treble, and Presence controls provide the tone shaping.  From Clapton to Van Halen, from Warren DeMartini to Lou Reed – and from you to Mike Soldano himself, the SLO is simply the player’s choice.
Tempo guitars and amps offered in 1971 included three nylon-stringed guitars, three steel-stringed guitars, and two solidstate amplifiers. These were pretty low-end beginner guitars probably imported from Japan, though the heads have a Harmony look to them. The N-5 Folk Guitar ($31.90) was standard-sized with spruce top and mahogany body (presumably laminates), slothead, tie bridge, no markers. The GM-62 Steel String Guitar ($29) was also standard size, “light” top and “dark” back with dots, moveable bridge with saddle and stamped metal tailpiece. The GM-300 Convertible Guitar Outfit ($33.90) was a spruce and mahogany slothead with dots and a glued/bolted bridge which could be used for either nylon or steel strings. It came with nylons and an extra set of steel strings. Harmony made guitars like this for Sears in the early ’60s. The N-48 Nylon String Guitar Outfit ($82.50) was a grand concert classical with amber spruce top, maple body, marquetry strip on the slothead and gold hardware, hardshell case included. The N-40 Nylon String Guitar ($45) was grand concert-sized with amber spruce top and “dark brown” body. The F-34 Steel String Guitar was also grand concert-sized with spruce top, “dark brown” body, belly pin bridge, block inlays, and engraved hummingbird pickguard.
FWIW: I have the same guitar, and it is around the same vintage as yours, with a 4 digit serial number and the headstock truss-rod adjustment. As you can see from the response from SLM, the headstock truss-rod adjustment was on the earliest Alvarez guitars. I have another Alvarez from 1981-2, that adjusts in the sound-hole. You'll see a lot of people claiming that they have, or are selling, 70's vintage Alvarez guitars, but have sound-hole truss-rod setup. To me, that's the first indicator that a guitar might be post 1980'ish. And actually, due to the neck attachment issues, I gravitate towards the 80's vintage, as they have had less time to have their neck angle change from string tension.
What would happen if four former Marshall employees got together? Well in this particular case, they formed Blackstar! Their product range includes hand-wired amps (the Artisan series) as well as products featuring different digital technologies (the ID:series). Plus, we have them to thank for the existence of the ISF system, a control that allows to switch gradually between American and British sound. In spite of the company's young life (it was founded in 2004), the brand already has many artists associated to its name like Silenoz (Dimmu Borgir) and James Dean Bradfield (Manic Street Preachers).
So, I’m 50+, I’ve never played a guitar, and I’m trying to decide on an electric guitar. I’m less concerned with the brand name, more concerned with high quality and workmanship, and last, I like the tone of the guitars played by the late Pete Ham of Badfinger (especially Baby Blue), and Joe Walsh. I know Ham played a cherry red Gibson SG standard, but I’m seeing quite a few mixed reviews on the quality control and workmanship of the current SGs. I listen to a lot of jam band music (i.e. Widespread Panic) and enjoy the rhythm guitar best. So, where to start and stay under $2000 to get a guitar that will produce the type of sound I’m looking for?

With the PAC112V there is no harm going with the crowds. The Pacifica is a crowd-pleaser precisely because of its versatility – and so whilst it might have a very recognisable look, this electric gives you the opportunity to craft a sound that is entirely your own. The only drawback is its weight, which is not much of a drawback at all – particularly for this price.

• Heavy is as Heavy Does: For low hanging alternate tunings like open D or dropped D, consider a heavy string gauge – at least .11s, although Stevie Ray Vaughan, who kept his instrument turned down just a half-step, employed a set gauged .13 to .58. Thicker strings will maintain their tension better when they’re low-tuned, which makes for less fret noise and other undesirable distortion. Many players feel thicker strings make for better slide playing, too, since the strings resist going slack under the pressure of the slide. But that’s really a matter of feel and learning to control a slide more than a string thing.
In standard Boss fashion, you get a set of four no-nonsense controls and a footswitch that is as durable as the case it’s installed in. However, none of this means anything if the reverb effect isn’t up to the expected level. Fortunately for us, Boss didn’t disappoint with this one. You get a reverb effect that is in that sweet spot when it comes to versatility and quality.
Reamping was originally invented as a creative tool. Instead of spending hours crafting the perfect guitar tone before hitting record, the dry signal from a DI is recorded and later “reamped”, saving time and letting the guitarist focus on nailing the performance. This allows the engineer to send the recorded dry signal through guitar amps or tone shaping devices during post production, eliminating the need for the guitarist to be present.
My husband was looking forward to checking this place out. When we entered a guy wearing glasses asked if he could help us with anything and my husband said "oh just browsing." So we walked around some more. When we got to the electric guitar section, my husband saw a $2,000+ guitar he wanted to try. He took off his jacket so as not to scratch the guitar and SLOWLY picked the guitar from the wall hanger. The same guy earlier suddenly came up to my husband and said "You can't just pull it out like that!" My husband was surprised and had to ask what he just said?! I was as surprised. The clerk said "You can't just take it unless you are buying it." Really?! My husband said then you should have told me earlier when we first came in. We did not see any signs nor there's any lock on the guitar hanger. Why would you buy without trying it first?! That clerk probably thinks my husband don't have the money. They just lost a customer and a bunch of my husband's musician friends.
When discussing the science of tone, it’s safe to assume that we all know how electric guitars work. Pickups are electro-magnets that sense string vibrations and produce a signal that ultimately blares out of the amplifier. Of course, we all know that myriad other factors influence the sound, as well. Body shape, wood choice, string selection, pedal effects, rack effects, humidity, amount of people in the room, and the guitar player’s recent fight with his girlfriend are just some of the items that can alter a guitar tone from performance to performance.
I'm no musician, know very little about guitars, but I think I stumbled on to a great deal. The predicament we faced last Christmas was that my two nieces, ages just 7 and 5, both fell in love with a toy "music" setup consisting of a plastic "guitar" and a fake microphone. I won't say the famous girl-toy-brand name it was marketed under but it was pretty much a collection of junk. The "guitar" had a few buttons on it to make noise... it would have been broken and tossed away inside of a week. And here in Costa Rica - a price of 34,000 colones or roughly $70!
The Thunderhead had two humbuckers, gold hardware, a master volume with two tone controls, a pickup blender knob, and a phase reversal switch. Some had DeArmond pickups with metal covers, a large black insert with nonadjustable poles, plus six tiny adjustable pole screws along one edge. The ebony fingerboard was bound with diamond inlays and had the characteristic “mustache” on the end of the fingerboard. The tops and backs featured figured maple laminates. Colors options included a wine red, sunburst natural, and green (on Thunderhead only). The Thunderhead K-1360 had a trapeze tail, the K-1460 a vibrato. The Tornado (K-1160 with trapeze, K-1260 with vibrato) was a downscale version with plain top, chrome hardware, two volume and two tone controls (no phase), and the Schaller pickups.
{"eVar4":"shop: books sheet music and media","eVar5":"shop: books sheet music and media: performance instruction","pageName":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods: guitar method books","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media: performance instruction","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop: books sheet music and media","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitar method books","prop5":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods: guitar method books","prop6":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods: guitar method books","prop3":"[gc] shop: books sheet music and media: performance instruction: method and instruction books","prop4":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods","campaign":"gcdirectsourcecode1","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category4"}
Unlike Andrew, before Rocksmith 2014 Carl had never played anything other than a toy-guitar controller. The lessons made it easy to learn the basics—from just holding the instrument properly, to playing basic notes and fingering techniques—all without the pressure of a human guitar instructor's waning patience. Since this was my first experience playing a real guitar, I was eager to learn and didn't mind that the notes scroll horizontally across the screen instead of Guitar Hero and Rock Band's vertical scrolling.

What is an Essex? Also who compiled this list? It definitely wasn't guitar professionals. Every guitar maker has top line and then entry level guitars. Top line for those that can play and entry for the beginner who 9 out of 10 stop playing and they don't care that a $60 to $200 mistake lays in the closet for years. Yamaha makes 100's of styles and a lot are great guitars and some stink. It goes with the territory in a very competitive market. This should have been better defined and broken down by cost levels. Because this could have even been titled "The 10 Best Guitar List"

When it comes to buying an electric guitar there are a lot of options available, and choosing one can be confusing. This guide will help you understand the basic differences in electric guitars so you can make an informed decision. And remember, we’re here to help with friendly Gear Heads available at 1-800-449-9128 who can guide you to the electric guitar that best meets your needs.

Near the beginning of Epiphone's thinline semi-acoustic range is 'The Dot', based on the timeless and legendary Gibson ES-335. The Dot feels comfortable to hold and play, and the neck, while by no means clubby, feels substantial in your palm, probably due to the 43mm width at the nut. Its slightly flattened C-profile increases marginally in depth further up the neck, making for a suitably vintage feel. An acoustic strum issues forth a pleasing, resonant ring. We'd wager that the Dot's all-maple construction has got something to do with that, but more obviously, the hollow bouts bolster the acoustic tone, inducing wry smiles to those listening. Before plugging in, listen to Ronny Jordan, then Noel Gallagher, then BB King, then George Harrison and John Lennon. It becomes immediately apparent that this style of guitar is hugely versatile. This Dot is no exception: the pickups, while not packing the punch of USA PAFs, offer everything form smooth and moody, front-position mellowness to screeching, bridge position rawk. It's one of the best electric guitars for jazz at this price point, too. The Dot looks fine, sounds great and plays great. To our minds, that's value for money indeed.
I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...

There were at least three different versions of this guitar with differing knobs, fingerboards, control plates, cord mounting, and trim. One even had a nice rosewood fingerboard with dots. This version was the most monochromatic of the bunch, I suppose. It cleaned up really nicely for these pictures. Okay, so it's an ugly little spud. My wife describes this guitar as "so ugly it's cute," and she fell in love with it in the store for that reason. I like that.

Versatile- many of the practice amps today have “AUX” (Auxiliary) inputs for your electronic music devices like your iPod, phone, or tablet computer. This is essential for learning songs because you can pipe your song from your device into your practice amp and play along either out loud or with your headphones in private. With so many music apps out today for iPhones and Android devices, you can also connect the headphone jack of your practice amp to your personal device to learn new songs and/or record your performance! Check out Ultimate Guitar Web on Google Chrome
The guitar player who makes his guitar sound anything but a guitar. Helicopter rudders, disc scratching, and his use of the kill switch for staccato like guitar riffs has made him probably the most innovative guitar player of our time. He is a guitarist who can take feedback, and ground hum from his own body into coherent music. Be it Rage Against The Machine, or Audioslave you can always see Morello’s signature licks shining through.
Another LTD model that is easily on the same level as the standard ESP stuff is the MH-100QMNT. The guitar comes from the very top of LTD’s entry level lineup, and brings a great price to performance ratio. I’ve had a lot of time to play with this guitar, and at first it didn’t sit right with me. As I played it more, I got used to the contour of the neck and the way its body ‘moves’. From that point on, ESP LTD MH-100QMNT grew on me rather quickly.
A basic overview of how they function might, the volume pot will receive a signal from the pickup selector it will then transfer this signal to both the tone pot and output jack. Pots can also come as ‘blended’ in which case it will control two pickups and may even have a toggle switch dedicated to just the one pot. This is much less common and won’t play a role in assembling an electric guitar kit in most cases.
"The library has a huge amount of great samples covering every nook & cranny of the electric guitar, and it really is of the highest quality... I could tell that they must have put in a gigantic effort into the scripting, sampling, and design... It’s easy to use, has extensive options for articulations, sounds even better with its effects, and yet it can have a pristine, clean sound as well. I highly recommend it... When they say 'Absolute Electric Guitar' on their website, those words are a lot to live up to [and] they achieved this with a brilliant product and awesome sound." Rob Mitchell (SoundBytes Magazine)
If you are new to electronics, the essential tool you most likely need to buy is a decent temperature controlled soldering station. A basic one such as a Weller WLC100 can be had for less than $40 and will do the job just fine. Really nice ones with digital temperature readouts from Weller or Hakko are $100-$150 and as much as you will ever need for a home pedal shop. The soldering pencils have interchangeable tips, so you can keep a selection of different sizes. The one that normally comes with a new station will be suitable for most through-hole pedal kits.
You will be able to chord the guitar with comfort and has bend strings. You will be able to play with ease as it has c shaped neck with satin finished. Its three single-coil pickups can allow you to play the rock and jazz sounds, two-tone sound controls, 5-way switches to pick up. ITS Synchronized Tremolo chrome allows you to create a flat pitch and sharp sound. This is just the right guitar in your certain budget to get the best quality assurance and peace of mind. 
The 600 series pairs maple back and sides with a spruce top that has gone through Taylor’s torrefaction process, which accelerates the wood’s aging process through heat. We couldn’t find a single fault with this guitar’s build quality and the 612ce is an unbelievably comfortable guitar to play. The tone is still that of a maple guitar, but a more refined one than we’re used to. Likewise with the torrefied spruce: it’s immediately familiar, but with enough difference to cause a cocked ear. Strumming out chords and standard singer-songwriter fare was pleasing, and it put in a good shift with some country-style flat-picking, but it is fingerstyle playing that this guitar lives and breathes. By any token these models from the 600 series are stunning guitars. They have a laudable ecological footprint, they look superb and they have rich, unexpected tonal qualities. 
But that's not the Ibanez we know today, although the two are related.. Japanese company Hoshino Gakki began importing guitars made by Salvador Ibáñez's company to Japan in 1929. This was so successful for them that they started producing their own similar guitars under this name in 1935. They started making modern guitars simply using the name Ibanez in 1957 and then, not being ones to hold a grudge given that the US Army Air Force destroyed their factory in 1945, began exporting them to the USA in 1971, and as they say, the rest is history.
Unfortunately, there is no single unified format used for Ibanez serial numbers. Ibanez guitar production is outsourced to several companies and facilities through the world and the numbering schemes are different in each region and/or factory. The information on this page is culled from several sources both on-line and off-line and represents a distillation of the available information. It applies primarily to electric guitars, but some information may also be applicable to acoustics.
Collings Guitars is an Austin, Texas based stringed instrument manufacturer. The company was founded in 1973 by Bill Collings who is “one of the most recognized and respected names amongst aficionados of modern acoustic instruments.”[ Their acoustic guitars have been highly regarded for decades.[2]In addition to acoustic guitars they also make electric guitars, archtop guitars,mandolins, and ukuleles.
thanks for your note. We are not drawing any conclusions whether one is better than the other, just that they are different, which I think is apparent from the samples. Also, we did use only one pickup that we moved between the samples, and mounted it in the exact same location in relationship to the bridge. I would claim that the only variable that could have been controlled to a greater extent is the picking attack.
The lower portion is reserved for two footswitches – each for one of two available effects. It’s a busy stompbox, that’s for sure. However, the versatility it offers is hard to top, and the tone quality is definitely on a high level. Depending on how serious you are about your reverb, Mooer TVR1 Shimverb Pro (click for full review) can be a real force multiplier if used correctly.
In the ever-changing world of jazz music, you shouldn’t be surprised to hear of some big changes to the jazz guitar market either! To reflect this we’ve tweaked our chart, removing a couple of models such as the Ibanez AF95FB and the D’Angelico EXL101, and adding five new six-strings. These comprise the faithfully reproduced Epiphone Masterbilt Zenith Classic and the thinbody LH-302T from The Loar. In the semi-hollow section, we added the Ibanez AM93AYS Artcore Expressionist and the beautiful Hagstrom Tremar Viking Deluxe, while the solid-body section saw the arrival of Fender’s Classic Player Jazzmaster Special.
As the crowds at Beatles shows got louder, they needed louder amps. Jennings provided Lennon and Harrison with the first AC50 piggyback units, and McCartney's AC30/T60 rig was replaced with an AC100 head and an AC100 2×15" cabinet. Lennon and Harrison eventually got their own AC100 rigs, with 4×12"/2-horn configurations. In 1966 and 1967, The Beatles had several prototype or specially-built Vox amplifiers, including hybrid tube/solid-state units from the short-lived 4- and 7-series. Harrison in particular became fond of the 730 amp and 2×12 cabinet, using them to create many the guitar sounds found on Revolver and Sgt. Pepper's Lonely Hearts Club Band. Lennon favoured the larger 7120 amplifier, while Harrison preferred the 730 and McCartney had its sister 430 bass amplifier.
Fuzz is an indistinct, nasty overdrive that is synonymous with Jimi Hendrix. The Dallas Arbiter Fuzz Face is the most famous fuzz pedal, known for the way is breaks up and adds something special to any guitar tone. Fuzz pedals are most commonly used on top of clean or lightly overdriven tones, as this is where the character of the pedal can really come through; used on top of already distorted tones they can be great for making a load of noise! Two main types of fuzz are available – silicon (which sounds softer and more rounded) and germanium, which sounds harsher and more treble-y.

I went to work for Southland Musical Merchandise Corporation on August 1, 1972. The company had been formerly owned by a very honest man named Harry Greenberg. Earlier in 1972 he sold out to Onsite Energy Systems and everything changed from "let's make the best product at the best price" to "let's see how high we can make our profit margin - to hell with quality".
The way you connect your amp, speaker and DI box depends on whether the DI box has a built-in dummy load.If miking isn't practical, or you don't want to find space for a soundproof speaker/mic box, then perhaps one of the available DI options will give you the result you need. I was once reviewing an analogue guitar preamp that provided several programs, both clean and overdriven, and I noted that one of the clean settings sounded really superb. When I checked the manual, I found this was the bypass position! The reason it still sounded good was that the unit was matching the high impedance of the guitar to the medium impedance of the recording system and, for clean sounds, you can get this same effect by using any good-quality active DI box that offers a high-impedance (500kΩ or more) input. A little compression will add density and 'spring' to the sound (experiment with the attack time to get the best 'pluck' sound, as too fast an attack can squeeze all the life out), while reverb will put back the missing sense of space.
In addition to guitars, Gibson offers consumer electronics through its subsidiaries Gibson Innovations (Philips brand), TEAC Corporation (TEAC and Esoteric brands), Onkyo Corporation (Onkyo and Pioneer brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems, pianos from their wholly owned subsidiary Baldwin Piano, and music software from Cakewalk. (See section #Instruments)
Grover Jackson became a partner with Wayne Charvel in the Charvel's Guitar Repair shop in California in the 1970s then Grover Jackson took over the entire business in 1978 and at that time they were making guitars under the name Charvel. Their guitars were tailored to the heavy metal and hard rock genre's of the day. Then a relatively unknown Randy Rhoads, who had just joined Ozzy Osbourne’s new band, contacted them in 1980 with the idea to create a highly customized guitar. That guitar, a new take on the Flying V called 'Concorde' became the first guitar to carry the Jackson brand and the company has been popular with shredders ever since.
As a rule, acoustic guitars with laminated spruce tops do not have the same resonance as those made from unlaminated tonewoods, but the Fender FA-100’s fuller dreadnought design provides a richer tone than some customers may expect. If price is a consideration, the Fender has been described as a “cheaply made guitar with a fantastic sound.” What’s more, When you buy a Fender product, you're investing in quality. The Fender Musical Instruments Corporation has been manufacturing instruments and equipment since the 1940s.
When jazz guitar players improvise, they use the scales, modes, and arpeggios associated with the chords in a tune's chord progression. The approach to improvising has changed since the earliest eras of jazz guitar. During the Swing era, many soloists improvised "by ear" by embellishing the melody with ornaments and passing notes. However, during the bebop era, the rapid tempo and complicated chord progressions made it increasingly harder to play "by ear." Along with other improvisers, such as saxes and piano players, bebop-era jazz guitarists began to improvise over the chord changes using scales (whole tone scale, chromatic scale, etc.) and arpeggios.[2] Jazz guitar players tend to improvise around chord/scale relationships, rather than reworking the melody, possibly due to their familiarity with chords resulting from their comping role. A source of melodic ideas for improvisation is transcribing improvised solos from recordings. This provides jazz guitarists with a source of "licks", melodic phrases and ideas they incorporate either intact or in variations, and is an established way of learning from the previous generations of players.

Originally delay was achieved using a loop of magnetic tape - first on improvised arrangements with a reel-to-reel recorder, and later on dedicated machines. The tape would pass through a recording head, then a playback head, then an erase head. The timing of the delay could be adjusted by moving the heads, or changing the speed of the tape. Tape adds its own colour to sound, so the echo would have that added warmth.
Replacing switch and jack covers. These are the plastic or metal covers that hold the jack and tells you witch switch is treble or rhythm. The switch cannot be repaired and will need to be replaced, however, a metal jack plate can never break and only will need to be cleaned. A plastic plate will need to be replaced or the screw holes need to be resized, do so properly and make sure every fastener is snug including screws and nuts.
I dont know but im looking for a good bass guitar too. Depends on your price range. Personally I realy like Ibanez basses and think they do really good low to mid price range basses. If you are looking at a professional quality basses you should look at Rickenbacker, Musicman (stingray), Fender, Lakland and Shadowsky as they are the main brands for professional basses.
In late 2013, it was announced that Absara Audio of Port Jefferson Station, New York, had purchased the rights to the Supro trademark from noted electronic engineer Bruce Zinky.[7] Zinky himself had used the Supro name for a series of amps beginning in 2005 from his company, Zinky Electronics. Absara announced in January 2014 that a series of new Supro amps would debut at the Winter 2014 NAMM Show in Anaheim, California.[8] The new Supro amps are cosmetically reminiscent of their progenitors from the 1960s.
The first Hagstrom electrics actually came to the U.S. beginning about 1959, carrying the Goya name imported by New York’s Hershman (Goya acoustics were made by Levin, also in Sweden). These were the now-legendary sparkle-covered hollowbody “Les Pauls” with the modular pickup units. However, while the Goya acoustics continued on in the ’60s (eventually to be distributed by Avnet, the owners of Guild in the late ’60s), the Hagstrom electrics took on their own identity and switched to Merson. The first Hagstrom I guitars were the little vinyl-covered mini-Strats with the “swimming pool” pickup assemblies – basically two single-coil pickups mounted in a molded plastic assembly looking like its nickname, with sliding on-off switches and the Hagstrom fulcrum vibrato (which was also used on early Guild solidbodies). These were followed by similar wood-bodied Hagstrom IIs, then the quasi-SG Hagstrom IIIs in the ’60s. Hagstrom electrics continued to be imported by Merson through most of the ’60s, but by the ’70s distribution had switched to Ampeg, which was responsible for the Swedes, and several thinlines, some of which were designed by Jimmy D’Aquisto. Hagstrom hung around until the early ’80s before disappearing.

{ "thumbImageID": "PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural/K36613000001000", "defaultDisplayName": "Fender PM-TE Standard Travel Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000138832", "price": "699.99", "regularPrice": "699.99", "msrpPrice": "700.01", "priceVisibility": "1", "skuUrl": "/Fender/PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural-1500000138832.gc", "skuImageId": "PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural/K36613000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The electrified hollow body arch top was created so the guitar could compete with the volume of horns in the big bands of the 1930s. And they’ve evolved considerably since then, growing from fat jazz boxes with necks that meet the body at the 12th fret to nimble, thin-lined instruments with cutaways like the Gibson ES-125 and Epiphone Casino, which are experiencing a renaissance today. From the single blade pickup in Christian’s guitar, modern hollow bodies now sport all types of pickups as standard equipment: humbuckers, single-coils, piezo-electric and so on.
My first Custom was a Charvel/Jackson Star body with a custom white paint with bullet holes and dripping blood from the holes ! My friend and Guitar teacher Randy Rhoads helped me get started on the right track in 1980 ,before I was playing in clubs and headlining shows later in the 80s and 90s,I was set with the perfect guitar! Gibson is just a brand name,Epiphones are better then Gibsons ,your just paying for a name,same with Fender! Remember,one of the greatest guitars was made for less then $300,so you should never really spend more then that unless it is a custom ,then you can do what you have to!
Amp Modeling: A multi-effects pedal does not necessarily guarantee that it also includes amp modeling. Amp modeling basically means that, in addition to effects like reverb, delay, chorus, fuzz, distortion, compression, et al. it also has the ability to sound like - or model - various tube and solid-state guitar or bass amplifiers. Amps have a tremendous impact on tone, which is why brands like Marshall, Vox, Fender, Matchless, Mesa Boogie, and many others have cult followings. Copying the true character of an amp in the digital world is admittedly a tall order, and one that multi-effects pedals are not great at; even the best ones struggle. Still, they do a decent-enough job, and you should decide if you want your multi-effects pedal to include amp modeling.
Martin Guitars has a storied history that dates back as far as the mid-1700s when Christian Frederick Martin was born to a family of modest German cabinet makers. At the age of 15, Christian Frederick traveled to Vienna and took up an apprenticeship with a renowned guitar maker, where he flourished in his craft. Years later and after a feud with the Violin Makers Guild, Martin decided to move his business to the United States, opening up shop in New York City. More than 100 years later (and through many trials and tribulations), Martin introduced their signature Dreadnought acoustic guitar, the same shape as the one pictured above. Funny thing is, it was actually based on a defunct style created by another company years prior. Now the standard for acoustic guitar shapes, nearly every manufacturer offers a version of the instrument made popular by Martin. Currently, the brand is run by Christian Frederick Martin IV, the 6th generation of the Martin family – and they’re still making some of the best instruments in the world.
By the late twenties, the idea for electrified string instruments had been around for some time, and experimental banjo, violin and guitar pickups had been developed. George Beauchamp had himself been experimenting with electric amplification as early as 1925, but his early efforts involving microphones did not produce the effects he desired. Along the way Beauchamp also built a one-string test guitar made out of a 2X4 piece of lumber and an electric phonograph pickup. As the problems at National became more apparent, Beauchamp’s home experiments took on a more rigorous shape, and he began to attend night classes in electronics as well as collaborating with fellow National employee Paul Barth.[1] When the prototype electric pickup they were developing finally worked to his satisfaction, Beauchamp asked former National shop craftsman Harry Watson to make a wooden neck and body to which the electronics could be attached. It was nicknamed the frying pan because of its shape, though Adolph Rickenbacker liked to call it the pancake.[6] The final design Beauchamp and Barth developed was an electric pickup consisting of a pair of horseshoe-shaped magnets that enclosed the pickup coil and completely surrounded the strings.[1]
Just as it’s important that the guitar, amp and effects are performing to spec, make sure that all cables are functioning properly (it’s uncanny how many times a lead that was working fine yesterday suddenly develops a fault just before a take). It’s a good idea to ensure that spares are available. That goes for strings, too – valuable recording time can be lost just because a string has broken and no one has a spare. Some engineers will try to insist you use brand new strings when recording, but don’t be bullied into it if you prefer the warmer sound of a played-in set; that applies especially to bass, as new bass strings can introduce undesirable harmonic content into the sound.
Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches (18.4 cm). Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars' compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.