Polytone Mega Brute, Jazz guitar amplifier fully functional. Has loads of clean head room but also has 3 settings: Warm, Edge and drive.  I think they’re rated and 65watts, into 8ohm 8” speaker. Super light and portable, approx. 22lbs. Probably from the mid ‘80s production. Hi and low gain inputs, bright switch, effects loop. Spring reverb. Mint condition and everything works like brand new. Shipped to the lower 48 for $50.00. Local pick up would be great. Return if unhappy but ship in same packing and also pay return shipping. Thanks  
Scott Knickelbine began writing professionally in 1977. He is the author of 34 books and his work has appeared in hundreds of publications, including "The New York Times," "The Milwaukee Sentinel," "Architecture" and "Video Times." He has written in the fields of education, health, electronics, architecture and construction. Knickelbine received a Bachelor of Arts cum laude in journalism from the University of Minnesota.
This guitar is a good example of the late 1960s Matsumoku made imports that were flooding the Americas.  This model with these pickups were made for many years, starting around 1966 through the early 70s.  That’s a good run!  Based on my research this particular model probably dates from the late 60s.Most of the time I see these guitars with chrome or tortoiseshell pickguards, and this is the first one I’d seen with a white guard.  Has a cool shape too!  These pickups were exclusive to Matsumoku and generally have a good sound.  I’ve measured about 10 of these pickups, and the reading are often all over the place.  Some of these read out near 9k, and some read out under 5k, so obviously the specs changed over the years.  I think the hotter reading pickups came from the later 60s era.Now that Lyle name was owned by the L.D. Heater Music Company out of Beaverton, Oregon.  They had some cool electric models here and there and seemed to really focus on acoustic guitars back in the day.  Most, but not all of the electric models were made by Matsumoku.Most Matsumoku guitars were made rather well, especially the wood parts.  Bodies and necks were always top notch and their finishes hold up better than the average import guitar.  They did some great, burst finishes!  But one weak point on all these Matsumoku electric guitars were the pickup switches.  They just weren’t made to withstand constant use and almost always fail.  Dano at Happy Guitar Repair knows how to rebuild these switches, and it’s just about the only way to bring them back to life.The all-telling Matsumoku plate is back there and the neck pockets on all their guitars were really solid.  If you’re looking to get into these vintage Japanese guitars, Matsumoku models are always a good place to get your feet wet!Mike Dugan loved this particular model, even though the frets were vintage Japanese tiny, and the pickups read out a little weak, sometimes a guitar just has a little chime and zing, and this one had it.  Enjoy peeps!
Next we look at the features and hardware of the guitar. What brand are the pickups? Is the bridge fixed or is there a tremolo system? Is there a locking nut or anything else to help with tuning stability? Does it come with a case? We also take this opportunity to look at any special features that define the guitar – perhaps a bridge that never goes out of tune, or a control switch that makes the guitar do crazy things.
It’s important to note in this discussion that loudness, generally measured with decibels, could potentially be labeled “good” or “bad” in so far as certain levels are known to usually produce pain in humans. For example, the United States government’s Occupational Safety & Health Administration (OSHA) regulates how employers and workers behave around noise levels that approach 85 decibels. As music fans, we may boast about how the Slayer concert caused our ears to bleed, but sling a jack hammer or stand under 747 jet engines for eight hours a day and see how fun those loudness levels are. But that’s volume, not quality of tone.
Once The Beatles became tied to Vox amplifiers (a deal was struck early in their recording career whereby they would be provided Vox equipment for exclusive stage use), the quest for more power began. John Lennon's first Vox was a fawn-coloured twin-speaker AC15, while George Harrison's was a fawn AC30 with a top boost unit installed in the rear panel. They were later provided with twin black-covered AC30s with the rear panel top boost units. Paul McCartney was provided with one of the first transistorised amplifiers, the infamous T60, which featured an unusual separate cabinet outfitted with a 12" and a 15" speaker. The T60 head had a tendency to overheat, and McCartney's was no exception, so he was then provided with an AC30 head which powered the T60's separate speaker cabinet.

The HSS pickup configuration with a five-way switch keeps things versatile and beginner-friendly. Two single-coils and an overwound bridge humbucker provide a good mix of glassy Strat-like and fat Les Paul-esque tones that are capable of straight-up rock, funk and blues. They’re good as far as in-house pickups go, but don’t expect tonal authenticity at this price point.
Some pedals, such as clean boost pedals and transparent overdrive pedals merely provide a much powerful signal to feed into the preamp section of the amp, causing natural overdrive. Overdrive pedals can provide both a boosted signal and an already distorted signal. Distortion pedals have different kinds of circuits that provide different kinds of distortion; the pedal provides an already distorted signal. Digital overdrives and distortions rely on electronic means of producing the signals, with some resorting to modeled sounds.

{"id": "113469598", "categoryId":"site5AAG", "name":"Vintage 1960s K300 Solid Body Electric Guitar", "pageUrl":"/Used/Old-Kraftsman/Vintage-1960s-K300-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/1960s-K300-Solid-Body-Electric-Guitar/000000113469598-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"539.99", "priceMin":"539.99", "priceMax":"539.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"60.00", "priceSavingsMaxPercent":"6,000", "inventory":"1", "brand":"Old Kraftsman", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"234720911023", "priceVisibility": "", "itemType": "Vintage"}


The Broadway by Epiphone features a laminated maple body with a select spruce top, producing a bright sound rounded up by the warmer tone of the spruce. It also has a hard maple neck with a Slim Taper C profile, a rosewood fingerboard with block-and-triangle abalone inlays, binding on the headstock, body, fingerboard and around the F-holes, a mother-of-pearl Tree of Life inlay on the headstock, gold hardware, a three-way pickup selector and an adjustable floating tremolo bridge.
One other effect that depends on EQ modulation is the wah pedal. As you rock forward on the pedal, the sound becomes more trebly. As you rock back, the treble range is muted. In the middle positions, a wah produces a nasal, midrange-heavy tone that is interesting and useful in its own right. Since you can change the wah's tone constantly while you're playing, it's a very dynamic and expressive effect that can become an integral part of your playing. Jimi Hendrix was one of the first guitarists to exploit the wah’s capabilities.
On top of that, the Champion 20 offers built-in effects, including reverb, chorus, flanging, delay, auto wah, vibrato, and tremolo. All of these effects can be chosen using a single knob, with an additional FX Level knob to control the mix of the unprocessed sound with the effect. These effects can’t match the flexibility and adjustability of separate effects pedals—for example, with the exceptions of reverb+delay and reverb+chorus, effects can’t be combined—but they can at the very least give beginners an idea of how these effects work. Many guitarists may find the Champion 20’s built-in effects to be all they need.
Hertz Guitar company was originated from Shanghai/China & North Korea. This brand of guitars produces electric and other wide range of guitars that can be used in studio recordings and live shows. This brand also manufactures guitar accessories. The starting price of guitar from this brand is 12,504 INR approximately. Anyone looking for an affordable electric guitar at a beginner and advanced level can buy this brand of guitar.
In a nutshell: Lowell Kiesel is the name of the guy who founded Carvin. He originally sold guitars under his own name, but later changed the company name to Carvin, a melding of the first names of his two sons. So, when Carvin changed the name on their guitars to Kiesel, they were actually reverting back to their roots. Kiesel is Carvin, and Carvin has always been Kiesel.
So, which are the best budget electrics guitars available today? We've gathered a selection of the electric guitars that we reckon offer the best bang for the buck in the sub-$/£500 market. You may recognise some of the perennial budget classics (hello - again - to the trusty Yamaha Pacifica), but there's a raft of high-scoring options out there for the more adventurous.
New in ’64 were the TG-64 (named for the year) and a matching series of solid basses. The TG-64 was essentially a Fender Jazzmaster shape with a slightly extended bass horn, the new, hooked four-and-two headstock (usually with a metal plate on the front), and best of all, our old friend the “monkey grip” handle in the lower bass bout, handed down from the old T-60. The pickguard was two-part, with one large piece under the strings and a little extension on the lower bout for knobs and jack. These had three single-coil pickups, usually the chunky, metal-covered kind with a black insert and exposed poles, although some have smaller oval metal covers with exposed poles, all controlled by three on/off rocker switches above the strings. A small sliding switch served as a rhythm mute, or lead boost, depending on your point of view.
The paper presents the results of the modal analysis of six types of structures made from plates. Firstly, was done geometrical modeling of structures, after which they were numerical modeled using shell and solid finite elements. The next step consisted in simulating the structures behavior to free vibration for different thicknesses and materials. The results were processed and compared in... [Show full abstract]
What makes it truly stand out is the infinite Reverb this pedal provides. If you’re looking to get an all-around “stomp-box” featuring everything you ever wanted with remarkable sound output, this work of art by EH is designed to make you never think about getting another Reverb pedal. It can fit in any form of setup, and it is destined to conquer your flavor.

I have been a bass player and still am however I started on guitar at 12 and went back to it about 12 years ago. There really isn’t too much difference of perfecting your craft on either instrument. The most important thing to realize is when to play and when not to. I spent years learning how not to be a busy bass player and now that I have such a passion for playing guitar, I’m learning how to sound busy without really being busy.
SOLD OUT: is a faithful D-28 design copy by Takamine Japan , discontinued production decades ago its Beautiful its near mint What more do I need to say besides this one will go quickly! Just in to be processed and pictured it's all original and in TOP condition! Contact Joe to buy this beauty at: jvguitars@gmail.com Pics soon to come do not hesitate your going to love this guitar.
Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-line headstock and creme binding, give it a shot of electrifying attitude. Dynamic, unique and unconventional—like today’s guitarists—the Redondo Player refuses to be bound by the past.
While there is absolutely no reason to go with "standard" if that's not what you prefer for a given instrument, I think it's safe to say that 10s (usually 10-46) are standard, since nearly every string manufacturer that uses such descriptors for their electric sets refers to their 10s as "regular." Ernie Ball Regular SLinky? 10-46. Fender Regular Whatevers? 10-46. D'addario Regular Light (note that there is no other, more REGULAR sounding name)? 10-46. Dean Markley Regular Blue Steels? 10-46...
1946 to present: Sitka spruce (darker than Adirondack). The change to Sitka happened on the larger "D" models first (in very early 1946). It took Martin a little while to use up all the smaller pieces of older Adirondack red spruce, hence the change to Sitka happend slower on the smaller body models. This is also the reason multiple piece Adi red spruce tops are sometimes seen on 0,00,000 bodies in 1946.
The LP-100 is among the most affordable, but also the most popular Epiphone models. It is the quintessential beginner guitar. Epiphone Les Paul-100 brings you that classic aesthetic in a package that is affordable and capable of sounding rather great. While it’s not something you’d want to do a world tour with, this Epiphone is perfect for beginners and intermediate players.

{"eVar4":"outlet: guitars","eVar5":"outlet: guitars: electric guitars","pageName":"[gc] outlet: guitars: electric guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"outlet","prop2":"[gc] outlet: guitars: electric guitars","prop1":"[gc] outlet: guitars","evar51":"default: united states","prop10":"category","prop11":"extended range electric guitars","prop5":"[gc] outlet: guitars: electric guitars","prop6":"[gc] outlet: guitars: electric guitars","prop3":"[gc] outlet: guitars: electric guitars","prop4":"[gc] outlet: guitars: electric guitars","channel":"[gc] outlet","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] outlet"}
The custom pickup for the AZ was developed in collaboration with Seymour Duncan. The pickups feature a moderate output through Alnico-5 magnets to keep the clarity of the fundamental tone when using a distortion sound, and to deliver a clear pick attack. From treble to bass, and from high-E string to low-E string, the overall tonal balance is evenly adjusted, and works well with various effect pedals.
Pedals of this template offer a sound that’s considered “natural,” “warm” and “tubey” partly by achieving smooth, symmetrical clipping, and partly by reining in harsher high harmonics that can result in sounds that are heard as jagged and spikey in other pedals. The truth is, opamps really don’t clip in the same way that tubes do, but they are manipulated in these designs to simulate a generally “tube-like” sound. Other early overdrive pedals were designed around discrete transistorized clipping and boosting circuits, though many leaned toward distortion units as properly defined, and added more artificiality to the sound—hence the Tube Screamers’ near-instant popularity when it was introduced.
This cheap acoustic guitar is highly recommended for beginners on a budget. It continues to stand among the best selling acoustics, and many a young musician has had this as their first ever guitar. It features a familiar combination of spruce top, mahogany body and neck, and rosewood fretboard. The guitar's classic configuration and traditional dreadnought shape works well with almost any type of music, from folk to rock and everything else in between.
The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.
Larry Robinson Fine Custom Inlays - They produce one-of a kind shell inlays for all kinds of guitars. One of a handful of inlay practicioners in the country, Larry has done exquisite work for major guitar manufacturers (Fender, gi bson, Yamaha,...), small production shops (Santa Cruz, Collings, etc.), single luthier shops (Klein, Ryan, Olson, Megas, and more), collectors like Tsumura and people who just want something to personalize their guitar.
With smaller combos, it is worthwhile experimenting with their position within the room, especially when a distance mic is being used. For example, raising the combo further from the ground will result in a different reflected signal path length for ground reflections. Placing a reflective material such as hardboard or linoleum on the floor between the amp and mic will emphasise any coloration this produces. Where a small combo or practice amp lacks bass end, you can try to exploit the boundary effect by placing a mic in the corner of the room, then facing the amplifier into the corner. If the added bass is too much, move the mic and amplifier away from the corner until the tonal balance seems right.
Whatever budget you’re on, you will always be able to find a suitable guitar. Even in the $100 price range you can find some models that play nicely. However, in that super-budget market there is a lot of garbage, so be careful. There’s a difference between ‘affordable’ and ‘cheap’, so do your research before buying something that may offer no value.
• Wound Up: String windings directly affect tone and playability. Round wound strings have more “zing” – sustain, responsiveness and bite. Flat wound strings have a smoother and more consistent tone regardless of attack, which makes them a favorite of jazz players, like the great Gibson ES-350 legend Barney Kessel. Blues guitar kingpin Jimmie Vaughan also uses flat wounds for his vintage tone. And they offer less resistance than round wound strings, so they can be beneficial for rapid, even toned performance and squeak less.
After your design has been properly plotted out on the poster board you can cut it out with an exacto knife. Make sure you stay as true to your lines as possible so you have a nice clean line to trace once your ready to. Then lay out the template on body blank and trace away. I like to cut the piece of poster board the same size as the body blank I am using. It makes it a lot easier to line everything up that way. Now you're ready to move on to the next step.
You want this before all of the remaining effects because you want, for example, a distorted signal to be delayed, not a delayed signal to be distorted. You can try it the reverse way but you'll end up with varying results since the gain will change during reverb tails, decaying delay echoes, and crazy chorus or flanger effects. And since these effects in this group rely on gain, you want to feed them a consistent and high gain signal, which gets reduced by other effects.
All product names, logos, and brands are property of their respective owners, and are in no way associated or affiliated with The Top Guitars.  Product names, logos, and brands are used solely for the purpose of identifying industry-standard products and brands used by The Top Guitars for the business of post production sound, and any related awards or honors therein. Use of these names, logos, and brands does not imply any co-operation or endorsement.
Call of Duty: Black Ops III is the ultimate 3-games-in-1 experience. In Campaign mode, you must navigate the hot spots of a new Cold War to find your missing brothers. Players can play the campaign cooperatively or solo and are now always connected to the intelligence grid and their fellow operatives during battle. Multiplayer features a new momentum-based chained movement system, allowing players to fluidly move through the environment with finesse, using controlled thrust jumps, slides, and mantling. Black Ops III multiplayer also introduces the new Specialist character system, which allows players to master 9 characters' battle-hardened weapons and abilities through a challenge-based unlock progression system. No Treyarch title would be complete without its signature Zombies offering. "Shadows of Evil" has its own distinct storyline right out of the box, set in the fictional 1940s Morg City, where four particularly troubled individuals — the femme fatale, the magician, the detective, and the boxer — star in this film-noir inspired horror story.

Combo guitar amplifier cabinets and guitar speaker cabinets use several different designs, including the "open back" cabinet, the closed back cabinet (a sealed box), and, less commonly, bass reflex designs, which use a closed back with a vent or port cut into the cabinet.[26] With guitar amps, most "open back" amp cabinets are not fully open; part of the back is enclosed with panels. Combo guitar amp cabinets and standalone speaker cabinets are often made of plywood. Some are made of MDF or particle board—especially in low-budget models.[26] Cabinet size and depth, material types, assembly methods, type and thickness of the baffle material (the wood panel that holds the speaker), and the way the baffle attaches to the cabinet all affect tone.[26]
Of course, the effect is not as good as using a professional studio but most users report that reproduction is very good for a simple computer application. The interface of Guitar Rig is extremely well laid out and even for those new to amps and guitar effects, it doesn't take long to navigate your way around. If you intend to use Guitar Rig for live performances, a convenient Live View displays the most essential readouts and level monitors to keep your eye on.
Popular condensers: when it comes to condenser mics for guitar-cab miking, the AKG C414 (in its various flavours — the C414 B-ULS is pictured above left) and the Neumann U87 (centre) are both popular choices. Some producers also frequently look to the U87's predecessors, the U47 valve (pictured) and FET models, and the U67.The characteristics that producers most often seem to be looking for in these mics are their extended frequency response, especially at the low end, and the slightly softer, more diffuse sound imparted by the large diaphragm. These mics also tend to boost the 5-15kHz region, but this boost is rapidly lost as you move off-axis (it is inherently difficult to design a large-diaphragm capsule with an even off-axis frequency response).

Martin makes classic guitars that have been featured in countless hit tunes. While they are best known for their top-of-the-line $2,000+ models, Martin also makes great guitars for any budget. Martin guitars always honor their tradition while continuing to strive for a better instrument. Give Martin’s new 17 Series a try if you want to see that theory in action.
Bridge pins prior to 1945 did not have string slots. There is a slight seam seen in the round head (hard to see but it's there). The bridge pin round head diameter from 1931 until mid-1939 was about 0.320". In mid-1939 the round head was reduced to about 0.300", and this size was used until the unslotted pins ended in 1945. The shaft size was slightly increased at this time too. The pre-1939 style pins have a more bulbous head, where the 1939-1945 style's head is more slender. The pin taper is about 5 degrees, and the diameter under the collar is about 0.225". The pins are made of hard celluloid. Several companies have reissued these old style pins.
You honestly could get a single multi-effects unit that will already have thousands of the most popular stompboxes built in, plug it into your PA or headphones, turn on one of the many built-in amp modelers, and you’re good to go. This is actually a solution that many touring musicians have gravitated towards, as it is so much easier to just carry around a single multi-effects unit compared to a pedalboard with several different pedals and a separate amp.
At the end of the day, sustain is just a fancy way of saying the length of time a note will remain audible after you pluck it. Sustain is mostly dependent on how much the body and wood of your guitar can resonate sound. Typically, solid-body guitars are the go-to source of sustain, but many pedals and amps are built with the purpose of increasing the effect. Some people prefer long sustain for certain genres; others simply are too lazy to want to pluck the string again.
The H9 is a pedal that can actually run all of Eventide's stompbox effects (apart from the TimeFactor's Looper). All of the effect algorithms (including their associated presets) are available for purchase, but several come already built in - you get Chorus and Tremolo/Pan from the ModFactor, H910/H949 and Crystals from the PitchFactor, Tape Echo and Vintage Delay from the TimeFactor, and Shimmer and Hall from Space. In addition, there's a new UltraTap Delay that's exclusive to the H9, plus a voucher for a free algorithm of your choice. The complex effects algorithms feature loads of editable parameters. The H9 has both wireless (Bluetooth) and wired (USB) connections for the free H9 Control editor and librarian software (iOS app, Mac, Windows) for editing, creating and managing presets, changing system settings and purchasing algorithms. This pedal has been designed to take full advantage of this and it works brilliantly, especially so on an iPad where a few finger swipes zap the pedal through thin air to produce instant results. Other one-effect-at-a-time 'chameleon' pedals exist out there, but the H9 pushes the genre's envelope.
Durability: Unlike individual stompboxes where you might use some sparingly, since your multi-effects unit contains all your effects you’ll be using it frequently. As such, it’s important that the build quality is up to par. This is where brand reputation comes into play as well, since you want the brand to stand behind their product in case anything bad happens. Rest assured the pedals we recommend in this guide are all from very reputable manufacturers with long histories of good customer support.
I've been to Steve about a dozen times with my guitars, families and friends instruments and have sent several people there and have nothing but great things to say.  He is reasonably priced and likely one of the most talented and experienced Luthier's in Boston.  It's rare to see any establishment get 5 stars from so many people and Steve deserves it!  Only thing is, if you're in a rush to get your instrument back, go somewhere else where they do it quickly and without much thought/TLC.  Steve takes his time to do it right and has a lot of customers because he's the guy to go to in the greater Boston area. Highly recommend!
The acoustic guitar lends itself to a variety of tasks and roles. Its portability and ease of use make it the ideal songwriter's tool. Its gentle harp-like arpeggios and rhythmic chordal strumming has always found favor in an ensemble. The acoustic guitar has a personal and intimate quality that is suited to small halls, churches and private spaces. For larger venues some form of amplification is required. An acoustic guitar can be amplified by placing a microphone in front of the sound hole or by installing a pickup. There are many entry-level acoustic guitar models that are manufactured to a high standard and these are entirely suitable as a first guitar for a beginner.
The case raised concerns for musicians who lack documentation of vintage instruments made of traditional, non-sustainable materials.[50][51] However, officials from the Justice Department and the U.S. Fish and Wildlife Service have stated that musicians who unknowingly possess instruments made from illegal wood would not be treated as criminals.[52]
Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.

Coming from the back of its introduction in 2006, this Hellraiser series of Schecter’s electric guitar is proving to be a game changer in the strumming market, by excelling far ahead in areas like sight, sound, durability, quality, and affordability—a stark definition of a unique electric guitar. These set of Hellraiser guitar are not only beautiful but also versatile.
The value of the guitar will also be an important factor that will contribute to the overall score – because spending $200 on a model that sounds like a $2000 guitar is always something that can’t be ignored! We rate the best acoustic guitars and the best bass guitar list in the same way. With every new model we add and review, we update the top 10 rankings.
When technology changed from valve to solid-state, it was noticed that solid-state amplifiers lacked warmth and bass performance, and had to be twice as powerful as valve amplifiers, to sound as loud. Current Drive: Solid-state amplifiers behave in ‘Voltage Drive’. This acts as a short circuit (zero output impedance, or 100% damping factor) across the speakers, causing excessive damping, which reduces efficiency, limiting responsiveness. Valve amplifiers behave in ‘Current Drive’. This represents an open circuit across the speaker without over damping, allowing maximum response and efficiency.
Ring modulation: In the context of signal reshaping, the ring modulator takes the signal from the instrument and adds a second signal from a local oscillator or signal source. The two signals are combined to produce the sum and difference frequencies, which are then the output of the device. This scheme was used in the electronic music of the 1950's. The output frequencies track the input signal frequencies, but do not equal them, so there is a shift from the original pitches. The ring modulator has been produced as a footpedal, and ring modulator type effects are included in some modern electronic effects boxes.
This beautiful wood is not a very common tonewood for the construction of a guitar body, but you may see it more commonly in neck construction. However, it has been done to build a guitar body, and it was done well on the famous Gibson J-200 that the Epiphone EJ-200SCE also imitated. It’s a very solid, hard, and dense wood that has amazing sound punch and bright tones.
The new generation of ‘boomers’ as they were known, thrived with the growing push on consumerism.  This of course included buying records and with the pin ups of Rock and Roll like Elvis and Chuck Berry – they felt part of a new movement which understood them and related to their struggles, such as growing pains, responsibilities and fitting in with society.
Dave Friedman (Rack System, Ltd.): “Pedal order is a very subjective thing, and I’ve had people do it all backwards because that’s the way they like it. Generally speaking, compressors come before overdrives, modulation things are kind of in the middle, and delays are at the end. The wah is kind of a personal preference. Sometimes it’s in front early in the chain, and sometimes it’s after overdrives.
Not everyone's ethos on EQ is the same, and most people may never see eye to eye on EQ approach. That being said, I come from the camp that subtractive over additive tends to be better for your mix in most cases. Now, I'm not saying to live in a strictly subtractive world; I do make boosts from time to time when needed or appropriate, but it's probably a 3:1 or 4:1 ratio of cuts to boosts.
Multi-effects units are exactly what the name implies—single units that offer many different effects and allow those effects to be used singly or in combinations simultaneously. Most will offer just about all the effect types discussed in this guide and many more. Typically they include dozens if not hundreds of effects presets—combinations of effects and effect parameters designed to achieve specific sounds with the touch of button or footswitch. Most also allow you to also save your presets for instant recall.

“The V100MU is everything I want in a guitar. The variety of tones from the Wilkinson W90SK pickups combined with the vari-coil enabling me to go from single coil to quasi double coil whilst the roller bridge and ‘classic’ vibrola is something I’ve never seen before on a contoured topped guitar. It really is a thing of beauty not just to look at but to play.”

{"id": "114572014", "categoryId":"site5AAG", "name":"Used S421 S Series Solid Body Electric Guitar", "pageUrl":"/Used/Ibanez/S421-S-Series-Solid-Body-Electric-Guitar-114572014.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/S421-S-Series-Solid-Body-Electric-Guitar/000000114572014-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"239.99", "priceMin":"239.99", "priceMax":"239.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"Ibanez", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"159269514523", "priceVisibility": "", "itemType": "Used"}
To make the OM more suitable for banjo players, the neck was made narrower and less V-shaped than previous Martins. The fingerboard was narrowed from the then-standard 1 7/8" to 1 3/4" at the nut. In addition to make the OM more banjo-like and to give it a distinctive look, banjo style tuning pegs were used. To do these, the headstock had to be made solid, instead of slotted. Previously Martin headstocks had all been slotted with tuners attached to the side mounted on a single plate for three tuners. No single-unit guitar tuners were available, so banjo pegs were a natural.
But having at least a very basic foundation to build upon - such as learning some basic chords, will allow you to learn more songs faster. My best advice is to abandoned any idea of instant gratification and commit to the idea that learning guitar is a slow process in the beginning. It gets exponentially easier to improve your skills after you get past the huge hurdles you encounter in the beginning.
As for the nuts and bolts of digital delays, any thorough, from-the-ground-up explanation is more than can be entered into in this space (and most of you at least know the basic principle behind binary encoding by now anyway, right?). Simply think of the digital delay pedal as another form of sampler: it makes a small digital recording of your riff, and plays it back at a user-selectable time delay, with depth and number of repeats also more or less selectable. The higher the sample rate, the better the sound quality. Early affordable 8-bit models really did leave a lot to be desired sonically, but as 16, 20 and 24-bit designs emerged, the reproduction of the echoes increased dramatically in quality.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","reportSuiteIds":"guitarcenterprod","pageName":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: amplifiers","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop: amplifiers and effects","events":"event1,event31","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitar amplifiers","prop5":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop6":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop3":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","eVar1":"guitar amp","prop9":"redirect","campaign":"4soswxxa","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category2","prop8":"guitar amp"}
The first edition of the Telecaster Custom was produced between 1959-1968, and featured a double-bound body. While the guitar was known as the Telecaster Custom, the decal on the headstock read “Custom Telecaster”. Later editions of the Tele Custom were popularized by Rolling Stones‘ guitarist and composer Keith Richards, featuring a Fender Wide Range humbucker in the neck position and a single-coil pickup in the bridge. The market generally refers to the guitar as the “1972 Custom”, indicating the year this model was originally released.

Fender is considered as an American manufacturer of amplifiers and stringed instruments, which was founded by Clarence Leonidas Fender in the year 1946. They provide a wide range of guitar. It has comfortable necks and  smooth fingerboard. Their headquarters located in Scottsdale, Arizona, United States. The guitar will available at Rs. 12,199/- onwards (approx). For further information, visit fender.com.
One of my favourite hardware effect units is the Electrix Mo-FX (sadly no longer in production). It is superbly constructed for hands-on performance and it offers full MIDI control over the panel's knobs and buttons. I use this in conjunction with the Sequentix P3 (a hardware step sequencer). Not only can the P3 generate patterns of controllers suitable for varying multiple Mo-FX parameters, but it can generate evolving or shifting patterns, courtesy of its 'accumulators'. In a nutshell, accumulators are designed to prevent your sequences becoming annoyingly repetitive: controller values (actually values directed at any internal sequencer parameter) can be added or subtracted on each pass of the pattern, with rules and limits directing the behaviour as the accumulation progresses. Digging through the Mo-FX manual quickly reveals all the MIDI Continuous Controllers you need. Usefully, you can also trigger the tap-tempo function via MIDI, and this offers a rather wonderful way of generating clock intervals. As you can decide exactly where to place your tap-tempo trigger events, and the P3 sequencer can shift or vary these events according to rules you devise, you can find clock sync intervals unseen on any other device. Paul Nagle

In the early 1950s, pioneering rock guitarist Willie Johnson of Howlin' Wolf′s band began deliberately increasing gain beyond its intended levels to produce "warm" distorted sounds.[3] Guitar Slim also experimented with distorted overtones, which can be heard in his hit electric blues song "The Things That I Used to Do" (1953).[8] Chuck Berry's 1955 classic "Maybellene" features a guitar solo with warm overtones created by his small valve amplifier.[9] Pat Hare produced heavily distorted power chords on his electric guitar for records such as James Cotton's "Cotton Crop Blues" (1954) as well as his own "I'm Gonna Murder My Baby" (1954), creating "a grittier, nastier, more ferocious electric guitar sound,"[10] accomplished by turning the volume knob on his amplifier "all the way to the right until the speaker was screaming."[11]
In 1981 Fender-CBS hired William Schultz, John McLaren, and Dan Smith away from the U.S. division of Yamaha. Schultz became the president of Fender-CBS, McLaren the managing director while Smith was appointed the director of marketing for Fender electric guitars. In a drive to rejuvenate the quality control and Fender’s market position, Dan Smith oversaw an upgrading of the basic production model Stratocaster and by late 1981 the new production model was unveiled as the 1982 Stratocaster. It featured a pre-CBS smaller headstock (compared to the 1980 “Strat”), a four bolt neck plate, an overwound X-1 pickup (introduced on the 1980 “Strat” model) in the bridge position and a body end truss-rod adjustment without the Bullet nut. These are known today as “Dan Smith” Stratocasters and prized by collectors for the attempted, albeit brief, return to pre-CBS stylings.
Beatles guitarist George Harrison bought a 425 during a brief visit to the USA in 1963.[7] In February 1964, while in New York City, F.C. Hall of Rickenbacker met with the band and their manager, and gave Harrison a model 360/12 (the second electric twelve-string built by Rickenbacker).[7] This instrument became a key part of the Beatles’ sound on their LP A Hard Day’s Night and other Beatles songs through late 1964. Harrison played this guitar sporadically throughout the remainder of his life.
In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.

I got this one because my 18-year-old Takamine G-series has some serious fret wear, and a slightly warped neck, even with the truss rod maxed out, and will cost more to repair/refurbish than this one cost outright. Hence, the action is quite high, and it's hard to play bar chords higher than the 3rd fret, and there's some noticeable buzz and rattle unless I hold my mouth just right...
Join the "Cigar Box Revolution"! This La Vox Cigar Box Electric Guitar is built from a decidedly uptown-looking round box. Neck-through construction means it is heavier than most cigar boxes, and it performs more like a standard electric guitar. Play some raw, smokin' blues, back-alley funk, or whatever else wells up from deep down inside.  More details...
The Myth: Most amp manufacturers were conservative from a previous generation with a background of country, jazz and religious music. They were horrified by the anti-religious, drug driven, sex crazed rock musos of the 60s’ diving their amps at full power into hard distortion for sustain. When these amps were first designed in the 50s, it was inconceivable they would be used in this way.
The benefit of a compressor lies in that every note played will be at nearly the same amplitude, and therefore nearly equal in volume. This will help normalize tones that are sometimes lost in the mix because of complex overtones, and it will result in a more articulate sound. Notice that if you don’t pick all notes of an arpeggio at exactly the same pressure you will likely get a different sound for each note, especially if you are playing a tube amp. Tube amplifiers react dynamically to stronger and weaker signals it’s the allure of them and thus the non-uniformity of picking at different strengths will be exaggerated. A compressor will fix this problem and normalize all notes of the arpeggio regardless of the player’s technique and equipment, which is consequently why many soloists prefer them.
Most bass speaker cabinets employ a vented bass-reflex design, which uses a port or vent cut into the cabinet and a length of carefully measured tubing or pipe to increase the low-frequency response and improve the speaker system's efficiency. To give an example, if one compares two bass cabinets, each with the same type and power of power amplifier, one cabinet being a sealed box and the other being a vented or ported cabinet, most listeners will perceive that the ported cabinet produces more bass tone and deeper bass tone. Less commonly, some bass speaker cabinets use one or more passive radiator speakers, a voice coil-less "drone cone" which is used in addition to a regular woofer to improve the low frequency response of a cabinet. Passive radiator speakers help to reduce the risk of overextension. Acoustic suspension designs with sealed cabinets are relatively uncommon because they are less efficient. Some cabinets use a transmission-line design similar to bass-reflex, and in rare cases, some large cabinets use horn-loading of the woofers (e.g., the Acoustic 361 18" speaker cabinet from the late 1960s).
A well known South Korean guitar brand, cort guitars is swiftly rising up in Indian markets. This brand is famous for producing acoustic, bass and electric guitars at less cost. Its starting price is 10,000 Rs and comprises of some best models like VL, all the G and Aero series and classic rock. If you want to buy this guitar, then you may purchase from online website or firm official websites as well.

In terms of the electronics, we are once more faced with a System 66 unit. You get a three-band EQ, a built-in tuner, and a versatile mid-range slider that allows you to really tune those mids to perfection. Overall, if you appreciate a comfortable guitar that sounds good and will take on any stage performance you can dish out, this Yamaha is something to look into.
Following on from the previous article, we look at the grand-daddy of all pickup selectors: the 4-pole super-switch. The possibilities with this switch are endless, and we scratch the surface by coming up with a wiring scheme for an HSH guitar that auto-splits the humbuckers in the 2 and 4 positions, and combines both humbuckers in the middle position.
Hugh Padgham adopted a similar tactic for recording Andy Summers' Roland JC120 when working with the Police: "The chorus [was] always switched on in order to produce the slightly out-of-tune guitar sound that was all the rage during the early '80s. The amp's two 12-inch speakers would each be close-miked with a Sennheiser MD421, panned left and right — one speaker would produce a straight signal while the other would be chorused, and these would sometimes be double-tracked the other way around in order to produce an especially wide stereo picture."
Even apparently crude solutions can produce useful results. For example, I was recording at a friend's flat many years ago and the amp I had only sounded any good when it was played flat out. The answer was to place the speaker cabinet on its back, place the mic right up against the grill, then cover the whole thing with blankets, sleeping bags and anything else that came to hand. It made the level in the room far more tolerable yet still produced the sound I wanted!
T5 (2005) – Abbreviation stands for Thinline 5-way. “5-way” refers to the five position pickup selector switch mounted on the top of the guitar which activates different combinations of components in the T5’s pickup system. When hooked up to an amplification system, it’s capable of producing a variety of acoustic and electric tones in a single guitar.
Dick Dale: Nicknamed “The Beast” by Dale himself, the guitar comes in “chartreuse sparkle” (a greenish-gold color) with a white pickguard and rosewood fretboard, with vintage 50s features and a number of custom modifications. Notably, the guitar comes with a reverse headstock and a reverse angled bridge pickup to achieve the sound of playing a Stratocaster upside-down, which was how Dale learned to play.

{ "name": "Black", "skuUrl":"/accessories/el-dorado-vintage-hand-tooled-leather-guitar-strap/361014000001000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 155.00, "formatedIntegerValue": "155", "decimalValue": "00", "isOnSale": false, "msrp": 155.00, "salePrice": 155.00, "listPrice": 155.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": false, "freeWarrantyAvail": false, "sku": "site1sku361014000001000", "displaySku": "361014 000001000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361014000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Vintage-Hand-Tooled-Leather-Guitar-Strap-Black/361014000001000-00-140x140.jpg", "styleImgAlt": "Vintage Hand-Tooled Leather Guitar Strap Black", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,240", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"82996536150", "restrictionType":"", "restrictionError":"" }
Here’s the idea: Conventional electric guitar tone controls employ a single pot and single capacitor connected to ground. As you turn the pot, more signal goes to ground for a darker sound. The capacitor value determines the cutoff frequency — the larger the cap, the lower the cutoff frequency and the darker the sound. In other words, the cutoff frequency is fixed, but the percentage of signal that gets cut off changes as you move the pot.
Distortion is usually generated by three distinct sources: the power amp, the preamp and the speakers. Many players overlook power amp distortion when trying an amp, but the power amp section is the source of what guitarists describe as low-end chunk and balls. Audition the power amp by turning the master volume way up and turning down the gain. The sound should be lively, with a crisp attack that jiggles your trousers.
The person who made up the Top Ten list of best guitars has it all wrong! Of all the guitar companies he lists, Carvin is the only company that still uses ebony as standard material for the fretboard. This is because most other companies refuse to take the time and expense of this type of production. The others all use rosewood because it is cheap, relatively soft and can be "slammed" together quickly by machine; an indication of how they make their guitars in general! No other company who makes guitars even comes close to using the hand selected grade of wood (start to finish) that Carvin does. Take a hint from someone who knows how great guitars made step by step; if you want a guitar made from the best materials you can get, with critical operations still done by hand, order one one from Carvin, try it for ten days, if you really don't like it just return it... No questions and no hassles... Really. If you are not the type of person who cares, or are not willing to do ...more
{"product":{"id":"H91419","stock":"","price":"999.99","name":"Artstar AS153 Semi-Hollow Electric Guitar","download":false,"sku_id":"","checksum":"637145126000","rep_id":"site51352403996001740095","displayId":"1352403996001740095","sku_rep_id":"","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Semi-Hollow and Hollow Body Electric Guitars","dept":"Guitars"}
I picked up a Lyle 630L recently for $100. Best playing acoustic I've ever played and sounds awesome, but it has a few issues. First being the fact that it's been played long and hard, with at least 3 frets showing hard wear. I had to tweak the torsion rod and raise the adjustable bridge some to stop a few frets from buzzing, but one is still a stickler. Bridge has cracked between the peg holes but the pegs still stay secure. My thought is to use good epoxy to stabilize it. Any thoughts? Also, leaving the strings taught over the years seems to have warped the body some, but there are no cracks or finish peeling from it. One tuner has been replaced with another style tuner, (looks like crap from the back) and I'd love to replace it.
Original Martin OMs from approximately 1929 to 1931 are extremely rare and sell for high prices. Many guitarists believe that the OM—a combination of Martin’s modified 14-fret 000 body shape, long scale (25.4″) neck, solid headstock, 1-3/4″ nut width, 4-1/8″ maximum depth at the endwedge, and 2-3/8″ string spread at the bridge—offers the most versatile combination of features available in a steel-string acoustic guitar. Today, many guitar makers (including many small shops and hand-builders) create instruments modeled on the OM pattern.[5]

Return authorization must be approved. Returns accepted based on R and B approval of unique circumstances that have been reviewed and agreed between R and B and buyer. Buyer must contact R and B Vintage Guitars with-in 7 days. Buyer is responsible for shipping charges back to R and B. Return payments will be made after successful undamaged return of the item.
The amps are interesting and also pretty much impossible to I.D. These were, of course, tube amps. Their basic cosmetics consist of two-tone tolex or vinyl covering � contrasting dark and light � arranged vertically with a wide band in the middle, just slightly narrower than the grillcloth. Cabinets had rounded edges, and, in fact, sort of look like ’50s TVs. One was a small practice amp, with two medium sized amps about 15″ or so high, and one humongous amp, complete with six 8″ speakers (which looks like the later HG-8).

The downside is you do pay a considerable sum for the pleasure! Still, the playability, comfort and tone on offer from is exceptional – as we highlight in the complete Taylor A12e review. It sports a Grand Concert body made from solid Sitka spruce on the top, with laminate sapele back and sides, along with a mahogany armrest for optimal ergonomics.

Then, one weekend his combo got the biggest gig of its career – opening for Tommy Dorsey and his orchestra. Charlie was hot that night, and Dorsey took notice. In one of those rare coincidences, Dorsey’s guitar player had just quit, and the next day Kaman was offered the job. Which path does the son of a construction foreman pursue? The uncertain, fleeting glory of the entertainment industry, or the unknown possibilities of putting craft in the air?
A Vibe or Univibe pedal reproduces the sound of a rotating speaker by synchronizing volume oscillation, frequency-specific volume oscillation, vibrato (pitch wavering), phase shifting, and chorusing in relation to a non-rotating speaker. The modulation speed can be ramped up or down, with separate speeds for the bass and treble frequencies, to simulate the sound of a rotating bass speaker and a rotating horn. This effect is simultaneously a volume-oriented effect, an equalization-oriented effect, and a time-based effect. Furthermore, this effect is typically related to chorus. Some vibe pedals also include an overdrive effect, which allows the performer to add "tube"-style distortion. This effect is the most closely related to a rotary speaker. Some Vibe-only pedals include:
The SG guitar kit while not as simple to assemble as an ST or TE (thanks to the pickguards or control plates being preloaded with electronics) is still a relatively straight forward guitar to assemble. This makes SG guitar kits a good option if this is your first building project and want to simply dip your toe in the water, to begin with before taking on something more challenging.
Can you scientifically prove the role of these influencers? Lab geeks and gadget gurus can measure signal strength, decibels, frequency distribution, gamma radiation, and other ranges. They can graph this data, create new data by creating logarithms, create even more data by creating even more logarithims, but they can’t decide what’s good or bad. Like it or not, you simply can not use a computer to prove that a ’63 Strat sounds “better” than a cheap 1988 import.
There are many similarities between the two designs, such as the exquisite detail of the visual appointments, from the bound necks and headstocks to their trapezoid and block inlays.  They both include separate volume and tone knobs for each of the two humbuckers, which can be switched between or used in conjunction with the 3-Way Toggle switch.  Once you get your hands on one, the differences become apparent quickly though.

Let’s start off with a real classic for a classic player! This Fenders vintage modified style Strat hss has captured the happy way of the 50’s, available in Surf Green, Daphne Blue and Fiesta Red and it’s a guitar that just makes your life a litter bit more worth living. The design is very much like the 1950’s electric guitars, from the soft V-shaped neck, maple fretboard and 8-hole pickguard down to the smaller things, like the knobs and the switch tip- everything just brings us back!
Not to say that other sounds don’t have their place: the total freakout—sometimes very, very cool in itself—of a second-rate tube amp pushed way past its normal operational capablities; the smooth, pliable, ultra-saturated sound of a cascading gain preamp; the cheesy, buzzy fizz of a cheap tranny amp slammed with too much gain and clipping to beat the band… Any of these can yield the godlike tone of the day in the right application, with the right player. But think Page, Hendrix, SRV, Blackmore, Eric Johnson, Clapton, Van Halen, Gary Moore, and it’s cranked vintage amps and touch that are producing the tone. They were often aided by some type of distortion pedal, sure, because that was the only way to switch textures between verses, choruses and solos, or to push the big amps into distortion at less than full volume. But who wouldn’t choose to get their rock overdrive sound from a 50W 1968 Marshall Plexi on ten, or their blues lead sound from a tweed Bassman on 12, if the ears and the noise police would stand for it? For most players in the broad spectrum of rock, even those usually chained to the back of the stage hacking away at a clean rhythm part, these yield the sweetest, most tactile, touch-sensitive and playable tones available. Get that amp cooking to where the riffs get juicy and fluid and effortless, sustain and harmonic feedback hover into view at the tap of a fret, and the preamp and power amp tubes’ race to keep up with the pick attack lends a comforting softness and compression to the feel (a sensation further enhanced by the natural sag of tube rectification, where present). Mmmm. You can almost feel it now. If we could only get that play-it-all-day vibe at tolerable volume levels, any time we liked.
Stay tuned for the second part of our series/parallel discussion next month. We’ll pick up the soldering iron and explore some sweet parallel/ series switching options for our Strats. This will also close out our run of Stratocaster mod columns. When we finish the series/parallel discussion, we’ll switch over to Telecaster and Esquire mods. Until next time, keep on modding!
This product was not working and parts were defect. I don't know how some people made it works. The instruction was terrible and seller's wires description photos are more worse. I did not expect much for this little toy. Just piece of the junk. I was tried to return, but the seller said that I had to pay return shipping and he gave me a fake return shipping address.

The first of the easy guitar chords for beginners is E minor, followed by E major. Next you learn A minor and C major, all in the open position, which means the chords contain open strings and are played at the nut position. The next chord is D major, followed by A major. You will learn the B major chord, which is a barre chord with the root note on the A string. After this you learn the B7 open chord, which sounds really nice.
The body was perfectly flat and the sanding sealer that was on it was great. I however in wanting a finish that was like a mirror used a enamel filler primer. The body was then shot with 6 coats of enamel black, wet sanded, and hung up to cure for 2 weeks. After curing the body was then shot over a matter of another couple of weeks with 10 coats of clear (remember that temperature and humidity have an effect ... full review

For a relatively new band, Dream State have - in industry parlance - gained some serious frigging traction, playing Reading/Leeds last year, gobbling up streams in the millions and signing to hardcore label par excellence UNFD. Lead guitarist Aled does a deft line in a tapped arpeggio, while breakthrough single White Lies covers a hell of a lot of ground in its four minute runtime - combining Marmozets’ urgency in its opening and Deftones’ dynamics at the close. 
The pickups on this guitar are really cool and not found on any other model that I’ve seen.  They are really loud single coils reading out at 5.58k at the bridge, and 5.90k at the neck.  The pole piece screws even have some “gold foil” surrounding them, which is really cool and not usually seen.  These pickups sound very close to vintage American p90s, and they have this loud, articulate, sparkly clean tone combined with a really grindy dirty tone.  These pups are special, seriously!  Also, those switches were standard fare through the late 60s on most Matsumoku guitars.
"Our expertise is to customize guitars according to the specifications of our clients. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. Our 100% satisfaction guarantee allows you to buy with confidence!"
The Hi-Flier likely is among the first of Univox's guitars. For those who don’t know, the Hi-Flier takes after the Mosrite Ventures. This guitar gained significant influence in Japan, particularly because of the Ventures’s enormous popularity in the country at that time. The Ventures were an instrumental group who rose to fame worldwide in the ‘60s, and, despite their decline in the U.S. in the ‘70s, remained “Beatlemania huge” in Japan up until today. Along with the Ventures-esque guitar, a Hi-Flier bass was designed as well, which was nearly identical to its six-stringed counterpart.
Besides insulting Taylor Swift in a way even Katy Perry would bristle at (“Nobody would confuse the pop star’s chops with Bonnie Raitt’s. But she does play a guitar.”), Edgers manages to make it through an entire history of the electric-guitar industry as it stands without quoting more than one female guitar player — the Runaways’s guitarist Lita Ford. Any person who has actually interrogated the music landscape deeper than, say, an Eric Clapton record would recognize that the electric guitar isn’t dying. The throngs of women who play electric guitar just don’t get exalted or celebrated in the same way as aging men. But there are legions of women playing guitar — maybe Edgers just hasn’t been paying attention.
As I commented above, my go to method for quiet practice is a PocketPod with Shure headphones. But, who doesn't like plugging in to an amp every once in a while? I live in a house, but the neighbors are close. The amp I use is a Fender Super Champ XD, which is a 15w tube amp with some digital effects. It seemed quiet enough at low volumes, but your mileage may vary. If I were you, I would at least give one a listen at a music store and see if it can do what you need.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 
Guitars with better-quality electronics can avoid these traits to an extent, but as you can see when you turn the tone pot all the way to zero, the dynamics of the RLC circuit that the pickup and tone circuit create result in a “hump” in the upper bass/low-midrange frequencies, roughly centered (in this example) around 300 Hz. This happens because the low resistance, coupled with the high “capacitive reactance” of the capacitor and the “inductive reactance” of the pickup’s inductor, creates what’s known as a “band-pass filter”, where a specific frequency range in between very low and very high frequencies has the lowest total impedance and thus becomes the most present in the tone.
In 2003,[73] Gibson debuted its Ethernet-based[74] audio protocol, MaGIC, which it developed in partnership with 3COM, Advanced Micro Devices, and Xilinx.[73] Replacing traditional analog hook-ups with a digital connection that would, "...satisfy the unique requirements of live audio performances," may have been the goal of this project.[74] This system may require a special pickup,[73] but cabling is provided by a standard Cat-5 ethernet cable.[73][74]
While continuing to keep the E string depressed at the first fret, move up the neck from the 12th fret to the end of the fretboard, continuing to depress the string at each of the successive frets. As you move up the fretboard, watch if and how much the distance between the bottom of the string and the top of the frets in the 6-7th fret range changes, if at all. The less the gap rises, the flatter, overall, the neck is. Using this method you may discern that there is more curve in one area than another, and not necessarily centering on the 6-7th fret area. In some cases this curve will be resolved by changing the tension on the truss rod. In other cases, adjusting the truss rod tension will not resolve them, and fret leveling, refretting, or heat bending the neck(rarely) may be necessary.

The original flanger effect was produced back in the 1960’s by recording to two tape deck simultaneously and mixing the result. As they were recording, an audio engineer would lightly touching the flange of one the reels of tape. When it played back, it created a swooshing effect similar to what you hear when a jet airplane takes off. Stomp boxes use a delay effect to create a similar sound.

A guitar recital may include a variety of works, e.g. works written originally for the lute or vihuela by composers such as John Dowland (b. England 1563) and Luis de Narváez (b. Spain c. 1500), and also music written for the harpsichord by Domenico Scarlatti (b. Italy 1685), for the baroque lute by Sylvius Leopold Weiss (b. Germany 1687), for the baroque guitar by Robert de Visée (b. France c. 1650) or even Spanish-flavored music written for the piano by Isaac Albéniz (b. Spain 1860) and Enrique Granados (b. Spain 1867). The most important composer who did not write for the guitar but whose music is often played on it is Johann Sebastian Bach (b. Germany 1685), whose baroque lute works have proved highly adaptable to the instrument.


Hohner Musikinstrumente GmbH & Co. KG is a German manufacturer of musical instruments, founded in 1857 by Matthias Hohner (1833–1902). Hohner is identified especially with harmonicas and accordions. The Hohner company has invented and produced many different models of instrument, particularly the modern melodica, and most of the harmonicas used by professionals. The company also makes kazoos, recorder flutes, melodicas, banjos, guitars, bass guitars, accordions, and ukuleles (under the brand name Lanikai), along with its one million harmonicas a year.

Electronic instruments are well known for their great versatility and all of the amazing sounds that they can produce. In many cases, those effects all come down to skillful use of the right pedals by a talented musician. When you're equipping your pedalboard, some of the first units you should look at are delay and reverb effects pedals. Delay pedals enable you to put a note on a timer and have it come back a few measures later. They're perfect for holding off a chord, then having it kick back in with a new sound layered in on top of it for cool combination effects. For example, you might mix a long, sustained note together with a more complex riff to briefly become your own rhythm guitarist. You can play a chord against itself to double up into a deeper, richer tone, or even simulate an echo for atmospheric effect.
The Epiphone Les Paul-100 Electric Guitar is another renowned guitar by the Epiphone Company. This guitar comes with 700T Humbucker pickups and the fretboard of the guitar is made out of rosewood. It has separate tone and volume controls to make it more user-friendly. The body of the Epiphone Les Paul-100 Electric Guitar is made from mahogany but has a maple top. It's thanks to the mahogany body that this guitar produces such a great sound. For a beginner, this instrument is a must-have.
“The V100MU is everything I want in a guitar. The variety of tones from the Wilkinson W90SK pickups combined with the vari-coil enabling me to go from single coil to quasi double coil whilst the roller bridge and ‘classic’ vibrola is something I’ve never seen before on a contoured topped guitar. It really is a thing of beauty not just to look at but to play.”
DISCLAIMER: Hoshino owns the copyright to all of the catalogs scanned in here. This website has NO RELATIONSHIP with the Hoshino Gakki Group and makes no claims to ownership of the linked scans. These catalog scans are provided solely for personal academic/research purposes, so that collectors and others who own one or more of these fantastic guitars can properly identify the model and year of manufacture.

Tone woods only effect acoustic or hollowbodys. The more dense wood harder tighter grained woods along with steep pitched saddle to stop string angle increases sustain.research labs experimented with marble body's and had tremendous sustain.also effecting sustain is type of neck.ie. bolt on set or thru. A bolt on May have equal sustain to a set if the thickness of body at bolt joint is made thicker but thru are best all have give and takes. Thru are less adjustable and limit repairs. Bolt on offer more adjustment. Set necks can be replaced or reset but cost more to do so. Thick heavy gibson let Pauls are known for the sustain.but endurance limited by heavy weight. It's all matter of choice. Buy usa or if not available japan. Stay away from Chinese or Korean they are bottom feeders
First of all, the staff are incredibly amazing, lovely, hilarious and helpful.  My bandmates and I are not the most knowledgable in terms of gear, and the first time we came in wanting to get our first our ever guitar petals, Blake actually drew a graph of sound to explain how guitar pedals worked. They are the absolute best. Helping us out and going above and beyond what staff should be expected to do.  Hands down my favorite guitar store in Seattle, great selection, prices and above all the attention to detail and friendly attitude of the staff.  Can't rave enough!  Definitely found my guitar store for life!  Would recommend for all your guitar needs :)

Fretsizes can be confusing.  They are small measurements but have a big impact on feel and the size designations can vary.  Its best in my opinion to think and talk of frets in their actual crown widths and heights rather than the old Dunlop numbers (the originator of the 6xxx numbering system) as they can mean different things to different people; i.e. Warmoth lists 6105 as .095-.047" while USACG has is at .090-.055" - these are two very different feeling fretsizes. 
The Sex Pistols, Steve Jones' brutish power chords and flamboyant gutter-glam solos were a perfect mirror for the taunting bile of Johnny Rotten – and a yardstick for every punk-rock noise-maker that followed. His legacy was set with indelible riffs on one record – 1977's Never Mind the Bollocks… – that inspired guitarists from Slash to Billie Joe Armstrong. It was an attitude as much as a sound. As Jones told a journalist during his days with the Sex Pistols, "Actually, we're not into music. We're into chaos."
Gibson is easily one of the most identifiable guitar brands in the world today, and even with the premium price tags of their instruments, many continue to look up to them as their dream instruments. Thankfully, the company has toned down the price a bit on some of their guitars, one of which is the J-15, which enters this list with its good balance of workhorse ready features, premium prestige and reasonable price tag.
To capture the best “dry” performance, an active DI such as the Radial J48™ is recommended as it produces more level which is useful for standard guitar pickups. As a rule of thumb, when using a passive instrument, select an active DI and when using an active instrument (such as a bass with powered pickups), a passive DI should be used. The DI makes the guitar signal suitable for recording by changing the impedance and converting it to a balanced signal. For a more affordable option there is the Radial Pro48™ which uses Eclipse transformers, while the JDV MK5™ is Radial’s flagship DI and can be optimized for any instrument.

000-15: Base model of the upper end Martin Guitar line. All mahogany orsapele construction. ‘A Frame’ “X” top bracing, 14 frets clear, Optional model 000-15S 12 frets clear. All -16 and -16 series 000 instruments have long scales (25.4″) and 1-11/16″ nut widths, in contrast to the -18, -28, and -45 series, which have the ‘traditional’ 24.9″ 000 scale, retaining the 1-11/16″ nut width.
Alibaba.com offers 50 german guitars brands products. About 34% of these are guitar, 30% are wood router, and 6% are other musical instruments & accessories. A wide variety of german guitars brands options are available to you, such as free samples. There are 50 german guitars brands suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of german guitars brands respectively. German guitars brands products are most popular in Western Europe, North America, and South America. You can ensure product safety by selecting from certified suppliers, including 22 with ISO9001, 4 with BSCI, and 2 with FSC certification.

Meaning of electronic: (of a device) having or operating with the aid of many small components, especially microchips and transistors, that control and direct an electric current. or (of a device) having or operating with the aid of many small components, especially microchips and transistors, that control and direct an electric current. Example is “electronic calculator”.
Epiphone began in Manhattan in 1903 when Anastasios Stathopoulo set up shop (not as Epiphone). When Anastasios died of cancer in 1915 his son Epaminondas (Epi) took over the business. Epiphone and Gibson had an on-going rivalry first in banjos and then in archtop guitars. Gibson finally acquired Epiphone in 1957. Although Epiphone guitars continued to be made in America for a time after the acquisition (often in the same factory, side-by-side with similar Gibson models), Epiphone is now a Gibson brand for overseas, imported lower cost guitars, though many are based on Gibson designs.
Essentially the 28s looked very similar to the E/EM/EB-18s. They had the same offset double cutaway body outline and the modified Viennese three-and-three headstock. Instead of maple laminate bodies with glued-in necks, the 28s had mahogany bodies and necks in a neck-through-body design. The basically slab bodies of the E-18 had gained a carved top, with a deep contour in the upper waist. The brass nut had become a Micarta nut. Fingerboards were now ebony. Finishes were sunburst.
{ "thumbImageID": "Modern-Player-Telecaster-Plus-Electric-Guitar-Honey-Burst-Maple-Fretboard/H76265000002001", "defaultDisplayName": "Fender Modern Player Telecaster Plus Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Honey Burst Maple Fretboard", "sku": "sku:site51309565842071", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Modern-Player-Telecaster-Plus-Electric-Guitar-Honey-Burst-Maple-Fretboard-1309565842071.gc", "skuImageId": "Modern-Player-Telecaster-Plus-Electric-Guitar-Honey-Burst-Maple-Fretboard/H76265000002001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Modern-Player-Telecaster-Plus-Electric-Guitar-Honey-Burst-Maple-Fretboard/H76265000002001-00-60x60.jpg", "imgAlt": "" } , { "name": "Transparent Charcoal Maple Fretboard", "sku": "sku:site51309565842056", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Modern-Player-Telecaster-Plus-Electric-Guitar-Transparent-Charcoal-Maple-Fretboard-1309565842056.gc", "skuImageId": "Modern-Player-Telecaster-Plus-Electric-Guitar-Transparent-Charcoal-Maple-Fretboard/H76265000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Modern-Player-Telecaster-Plus-Electric-Guitar-Transparent-Charcoal-Maple-Fretboard/H76265000001001-00-60x60.jpg", "imgAlt": "" } ] }
An octave pedal listens to what note you’re playing and adds the next octave up or down (depending on your settings) making it sound like someone is playing the octave note with you. If you’re familiar with guitar or just learning, you’ll know that an octave is the distance between one musical note and it’s corresponding note at a higher or lower pitch. For example, if you play an open E string and then play the E string on the 12th fret, it will sound the same, just an octave higher.
The best choice for ambient miking is most likely to be a good condenser – probably a large-diaphragm type, though a small-diaphragm type will work. Plenty of ribbon mics give good service as ambient mics also, if you have a clean, high-gain mic pre-amp to track them through. And where do you put it? Well, three or four feet back from the speaker will start to get a significant amount of room sound into the mic, but for more-ambient placements, try six feet or more, and experiment with different heights from the floor, far corners, and so on. One nifty way to find a cool ambient placement is to use your own ear like a mic, and stick the mic at the position in the room where the guitar tone sounds the best to you. This is ideally done with another person playing the guitar; cover one ear and walk around the room listening to the sound in different positions. When you hear a sound that really nails what you’re trying to capture, set up the mic right there. Done.
These guitars work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Semi-hollowbodies are noted for being able to provide a sweet, plaintive or funky tone. They are used in many genres, including blues, funk, ’60s pop and indie rock. They generally have cello-style F-shaped sound holes, though these can be blocked off to prevent feedback, as in B.B. King's famous Lucille.
×