There’s another wrinkle: vintage-style pickup magnets can weaken over time, resulting in a softer, smoother tone. Some pickups are designed to mimic this ageing process. Say you were looking for a vintage P.A.F.-style humbucker: You could choose between one of our models that that sounds like a pickup straight off the late-’50s production line (the Seth Lover humbucker), and another that mimics a similar pickup as it would sound and look today after decades of wear and tear (the Antiquity humbucker).
Nice-Keys-Extreme-2.0  Still a big SoundFont set at 1gb or 1000mb (645mb dedicated to 3 pianos with 6 velocity layers). Similar to the top set but the main piano is a little less detailed so it leaves room for an extra piano (Steinways).  PC users should not have any problems or if running on iOS this set runs perfectly well on iPhone 6s or iPad Air 2. It is still possible to load this set within the bs-16i app and run Sweet Midi Player app using GM set one at the same time for midi backing if required. This set has everything described below plus the addition of guitars.
EQ can make a tremendous difference in the sound of your instrument. This becomes especially important when playing in a band setting. Your guitar might sound great played alone, but within the sound mix of a full band may need some tweaking. Depending on which instruments are involved, you will need to adjust EQ to help your guitar fit into the overall sound the rest of the band. Using an EQ effects processor can help you dial that sound in more easily and precisely than depending on just your guitar and amp’s EQ controls.
The Gallien-Krueger 800RB was a solid state bass amplifier head introduced in 1983 that was liked by bassists for its loud, clean sound and durable construction. It introduced the concept of bi-amplification, as it sent 300 watts of low register sound to the bass speakers and 100 watts to the tweeter.[6] The GK used a tube preamp simulator circuit called "boost". GK 800RB users include Red Hot Chili Peppers bassist Flea and Guns and Roses' Duff McKagan.[6]
{ "thumbImageID": "Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Black/J73166000001000", "defaultDisplayName": "Squier Affinity Series PJ Bass Pack with Fender Rumble 15W 1x8 Bass Combo Amp", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000053269", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "499.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Black-1500000053269.gc", "skuImageId": "Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Black/J73166000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Black/J73166000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Brown Sunburst", "sku": "sku:site51500000053270", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "499.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Brown-Sunburst-1500000053270.gc", "skuImageId": "Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Brown-Sunburst/J73166000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Affinity-Series-PJ-Bass-Pack-with-Fender-Rumble-15W-1x8-Bass-Combo-Amp-Brown-Sunburst/J73166000002000-00-60x60.jpg", "imgAlt": "" } ] }
Sorry This guitar has SOLD OUT! Here is a wonderfully crafted in Japan 000-18 type acoustic guitar by the great Takamine in the prime time of the lawsuit copys made with Pride in Japan long gone these have been discontinued decades ago over the copyrights to this Headstock design and also the logo looks identical to the Old 50s early 60s Martin from a few feet away looks exactly the same, that said this example is like owning a fairly new Vintage it has aged near 40 years yet is still near mint condition w/ nice OHSC.
London and Tokyo’s vintage street-racing motorbikes have inspired the designers, and the guitars from the Revstar collection look and sound accordingly. The idea is to have a diverse range of guitars so that you can be sure to find one that suits you perfectly. They even claim that this guitar is so good that you will consider it to be your other half (maybe even your better half).
Some delay pedals also come with full looping abilities, allowing you to play detailed multi-part melodies completely by yourself. A few artists to look to for great examples of delay pedal use are Angels and Airwaves, U2 and Muse. Reverb pedals are an entirely different animal. It brings its own unique type of sustain to a note, infusing the sound with strong texture and character through its distinctive echo. Creating a sound not quite like any other effect, reverb calls to mind the energetic surfer rock of the 1960s, such as Dick Dale's version of "Misirlou." You can stay true to those vintage roots or take the effect in a new, modern direction—it's up to you. With the added dimension they bring to your tone, you'll want to use your delay and reverb effects pedals at every performance. They make a unique contribution to the sound individually and even more so when you use them as a team.
The National STEM Guitar Project, in partnership with NSF Advanced Technological Education (ATE) Centers with funding provided through a grant from The National Science Foundation (#1700531, #1304405, & #0903336), hosts innovative Guitar Building Institutes throughout the US. Five-day institutes, combined with additional instructional activities comprising 80 hours, provide middle, high school, and postsecondary faculty training on science, technology, engineering and math (STEM) applications as they relate to the guitar. The institutes present and teach participants hands-on, applied learning techniques to help engage students and spark excitement for learning STEM subject matter.
Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
You can choose between tube amps, hybrids, or solid state models. The first are generally viewed as the grooviest. The latter are cheaper, more reliable, and require less maintenance. And the hybrids are often a practical compromise. (Keep in mind that watt for watt, tube amps are much louder than their solid state cousins with similar wattage ratings.)
If you're in need of some assistance, you've come to the right place. At BestReviews, our goal is to help you find the perfect products to fit your individual requirements. We test items in our labs, gather feedback from existing customers, and consult experts. The result? Fair and thorough reviews that help you cut through the jargon. Read on for our full guide to electric guitars to learn all you need to know to pick the right one for your next jam session.

The guitar pedal community is enormous. From the big name brands like Boss and Electro-Harmonix, to the lesser-known boutique effect pedal brands, such as Big Ear N.Y.C and Adventure Audio (the creators of the Fuzz Peaks pedal). This vast sea of guitar pedal manufacturers makes sure that if there is a tone or sound you are looking for – you can probably find a guitar pedal to do the job. However, sometimes you need something done your way, and that is where building DIY guitar pedals comes in.


If you’re using temporal effects such as delay and reverb, these generally work best at the end of the chain. Putting a delay at the end allows the effect to give a more natural echo to everything that comes before it; the echo itself will not be altered by other effects. The same applies for reverb. Most guitarists leave reverb as the very last effect, occasionally using the amp’s in-built reverb over a pedal. Amps that have onboard reverb usually use a spring unit which produces a shimmery twang that works well for many types of music. However, if you’re looking for a roomier type of reverb that emulates a giant concert hall, a pedal based reverb is probably what you’re looking for. Either way, putting reverb at the end of the chain provides a spacious, natural tone that simulates a cavernous echo.
Electric guitars are the easier to play as compared to acoustic guitars. But only because the chords are easy to play, that much force is not required to hold the chords as well as strum the chords. So it would better if you first practice the chords and the strumming on an acoustic guitar. The song Yellow by Coldplay, mentioned below, is considered as one of the best guitar tabs for beginners.
GUITAR BLEND/BALANCE POT, 500KA.  Bourns dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. 1/4" knurled shaft diameter. Solder lugs. 3/8" bushing.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special MN taper used for balance/blend pots.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
The Schecter Hellraiser C-1 Electric Guitar features a solid mahogany body that guarantees durability, along with a set-neck having ultra access. There is hardly a guitar which sounds great in regular, single-coil configuration, also in humbucker mode, but that’s what the Schecter does; having excellent sustain. The set of this guitar was great out of the box, while the fingerboard is good, smooth and quick.
From the standpoint of theoretical perfection, the Baxendall tone control is the opposite of the Fender tone stack. With bass and treble variations that are mostly independent, the frequency response is quite flat when both controls are set to the middle of their range using linear pots. Using the opamp/feedback form of the controls means that there is no signal loss that needs be made up elsewhere. This is virtually the standard for hi-fi tone controls. However, there are some guitar amps which use this form of control, tweaked a bit to match the guitar frequencies.
6) PLEASE DO NOT POST THE FOLLOWING: Memes, jokes/skits, rage comics, sub-related rant posts, spam, advertising of your goods or services, shill advertising, links to outside retailers (links in discussions are ok), gear for sale posts (head to /r/Gear4Sale). Comment manipulation (edits made to conceal behavior) is strictly prohibited. Market research is strictly prohibited.

Being in the entry level section of the market, the Blackstar ID:Core Stereo 20 V2 is meant to be an all-in-one practice rig complete with amp modeling and effects. But what makes it stand out is the use of two 5" speakers for a fuller stereo sound, which complements the amp's versatile voicing features. Speaking of voicing, this amp is loaded with 6 essential tones to play with, two variations of clean (warm and bright), crunch (normal and super) and overdrive (OD1 and OD2), which by themselves are enough to play most musical styles. But being from Blackstar, this amp is equipped with their ISF (Infinite Shape Feature) knob that lets you fine tune the voicing of the amp to your preference. In addition, the ID:Core Stereo 20 V2 comes with 12 built-in effects, covering essential modulation types, delays and reverbs, all of which add up to a portable amp that gives you a lot of tone options.
The Afterneath gets a place on our favorites list, largely because of the "Drag" feature that allows you to sort of delay the decay of your reverb effect, giving off an ambiance that trails off behind each original note as it bleeds into new notes. It's a very unique reverb effect, which blends particularly nicely with a fretless bass in the example video below. 
Given the small amplifier that comes with the Rise by Sawtooth, one would have thought it wouldn’t offer much, but it turns out to be just everything you ever wanted in a beginner or intermediate electric guitar, even as it is capable of giving that adequate sound and melody when connected to the guitar using the connecting cable that comes with it.

List of electric guitar brands that include the most reliable models available. Electric guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best electric guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
This model stands out from the rest due to its modified Explorer body shape. It’s one of the more affordable guitars with such an exotic design. However, it not only looks good but it also sounds good as well. There’s enough juice in those pups to make any amp scream. Explorers aren’t really my thing, but I can’t say that Jackson JS32T Kelly was bad when I played it. On the contrary, it’s actually quite good.
Cadsoft Eagle is a very popular tool with pedal builders. A basic version can be had for free. There are limitations on board size and number of layers in the free version, but these won’t come in to play for the majority of basic analog effects pedals.  Element14  includes a host of documents and tutorials.  If you get into complex designs or full professional use later,  full versions of Eagle, at time of writing cost $575, and $1640.
{"product":{"id":"451058","stock":"instock","price":"9.99","name":"Electric, Acoustic and Bass Guitar Stand","download":false,"sku_id":"451058000001000","checksum":"12742902520","rep_id":"site5127474174231345694","displayId":"127474174231345694","sku_display_id":"1274228076940","sku_rep_id":"site51274228076940","gc_pro":false},"category":"Stands & Racks","pageName":"product_detail","subcategory":"Guitar Stands & Wall Hangers","dept":"Accessories"}
Compressor sometimes sounds good after distortion too, it helps with noise (compressors can be noisy and if put before overdrive then the distortion pedal makes the noise louder). Placing the compressor after distortion also increases your sustain (depending on the type and amount of distortion used!). It can sound darker if placed after as well - so it really is down to your ears and what you think sounds best! But I have mine first in the chain, before Fuzz as I don't often (ever?) use them together
There are different ways to play electric guitar. One is to just play the electric guitar, and to take it as it is. Another way is to play the guitar as a sort of synthesizer. With the right effects (delay, reverb, volume swells, added octaves), no one would even know that it was a guitar. Neither way is wrong, but we refer to both as "playing electric guitar" even though they're being used in completely different ways that may as well be different instruments. Drama ensues.

Item Weight 9.6 ounces Product Dimensions 2.5 x 2.8 x 4.2 inches True Bypass Footswitch Zinc Alloy Outer Cover Transparent top knob and 2 cool small black knobs Psychedelic music uses the imagination to filter how we understand this strange ad beautiful world we live in: through melody and noise, with echoes and ambience, with peace and love. The TAPE EKO is a smart echo pedal that embodies the soul of the classic tape echo sound. It provides three delay modes: Mode I, Mode II, and reverse mode. Mode I gives you all the advantages of a digital delay. Compared with other tape echo effects, this mode produces a brighter, cleaner tone with less noise, all without sacrificing warmth or dynamics. Mode II differs from Mode I in terms of dynamics.
From 1959 to 1967, the Stratocaster was made with a rosewood fretboard as standard, as well as color choices other than sunburst, including a variety of colorful car-like paint jobs that appealed to the nascent surfer and hot-rod culture, pioneered by such bands as the Surfaris,the Ventures and the Beach Boys. Fender would paint any guitar from the DuPont car color range for 5% over purchase price.

The Limited Edition Slash Firebird Premium Outfit also features Epiphone's rock solid nickel hardware including a classic Epiphone LockTone ABR Tune-o-matic bridge and Stopbar tailpiece, Kluson Reissue Firebird Banjo-style machine heads with a 12:1 ratio, a Switchcraft 1/4" output jack, and Epiphone Straplocks. A standard Epiphone hard case is also available.
Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.
While the other digital amplifiers we tried (the Blackstone ID:Core Stereo 10 V2 and the Line 6 Spider Classic 15) offered a similarly wide range of good sounds, most of our panelists preferred the Champion 20 simply because it was easier to use. Lynn Shipley Sokolow preferred the simplicity of non-digital amps such as the Vox Pathfinder 10, but she said, “The Fender is the best of the digitals because it’s easy to understand the controls.”
The Gibson style guitars generally have shorter stubbier necks, with a 233/4 inch scale length, which suits some but not all. The Les Paul, the quintessential model, boasts twin humbucking pick-ups which effectively reduce noise and produce the thick, warm tone associated with Gibsons. It is difficult not to be impressed by the tradition of Les Paul guitars. No-one will ever convince me there is a better looking guitar style. For under $1000 the Epiphone Les Paul Standard will give you a little bit of the legend to take home and for many that's a good enough reason to buy one. Epiphones are cheaper factory made versions of the Gibson USA range. For those who learn on Gibson style guitars the Les Paul is what all guitars are measured against.  more...

The JX44 Air Control™ allows up to four guitars and six amps to be used at once, as well as a built-in Radial DI, an SGI interface for longer cable runs, and an X-Amp to make the reamping process incredibly efficient. No wonder it won the Music Players ‘Wish I Had One’ award! Pair it with a Headbone amp head switcher and the JDX 48 for the ultimate in control and consistent tone night after night.
Martin’s first truly electric guitars were the Style F thinline archtops which began in prototype stage in 1961 and entered production in 1962. The F Series consisted of three models, the F-50, F-55 and F-65, all with bodies slightly less than 2″ thick and made of maple plywood with bound tops. All three had shapes roughly reminiscent of the dreadnought that made Martin famous, though slightly exaggerated with a wider lower bout. The cutaways were fairly wide and radical, cutting out at almost a right angle from the neck. The glued in necks had unbound 20-fret rosewood fingerboards, dot inlays and the typical squarish Martin three-and-three headstock. Necks joined the body at the 14th fret. Each bore an elevated pickguard and had a distinctive moveable adjustable bridge made of clear plexiglass.

Eddie Kramer has a slightly different approach, working from a familiar setup of favourite close and ambient mics (including the Beyerdynamic M160 ribbon mic) and then mixing them together to taste. "I use a three-mic technique: an SM57, an MD421 and an M160, all in a very tight pattern. Then I can pick and choose the tone quality, because each mic is totally different. I combine these together, and then I put a U67 away from the amp to get the ambience."
Anyway, this little beast didn’t need much work. This is one of the pleasures of working on a Champ-style practice amp. They have so little in them, there’s simply not much to go wrong or fix. This one, it turned out, only needed a filter cap job, a new preamp tube and one coupling cap. Piece o’ cake. Twenty minutes of soldering and one $4.00 7F7 tube later, I had a monster little Champ-esque amplifier (actually it sounds a little more like the Gibson Skylark than a Champ, but that’s cool by me) for under $80.
Pictured is a tremolo arm or vibrato tailpiece style bridge and tailpiece system, often called a whammy bar or trem. It uses a lever ("vibrato arm") attached to the bridge that can temporarily slacken or tighten the strings to alter the pitch. A player can use this to create a vibrato or a portamento effect. Early vibrato systems were often unreliable and made the guitar go out of tune easily. They also had a limited pitch range. Later Fender designs were better, but Fender held the patent on these, so other companies used older designs for many years.
With an entire industry surviving off musicians’ insatiable desire for the ultimate guitar tone, it seems obvious that some company would have cracked the code for the greatness. After all, corporate chain restaurants can quantify that if they use X of fat, Y of salt, and Z of sweet in their latest enormo-burger, then consumers across the country will salivate. Unfortunately, it’s not that simple with music. 

Electro-acoustic guitars are commonly referred to as semi-acoustic guitars. Electro-acoustic guitars have pickups that are specifically designed to reproduce the subtle nuances of the acoustic guitar timbre. Electro-acoustic pickups are designed to sound neutral with little alteration to the acoustic tone. The Ovation range of Electro-acoustic guitars have under-the-saddle piezo pickups and a synthetic bowl-back design. The synthetic bowl-back ensures a tough construction that stands up to the rigours of the road while offering less feedback at high volumes. Ovation were the first company to provide on-board Equalization and this is now a standard feature. The Taylor Electro-acoustic range uses the traditional all-wood construction and the necks of these guitars have a reputation for superb action and playability. Yamaha, Maton and many other companies manufacture Electro-acoustic guitars and the buyer is advised to test as many models and makes as they can while taking note of the unplugged and amplified sound.
Now, in the days of solid state signal processing, outboard units are available to produce a facsimile of the old tube-type distortion. Some units actually incorporate a vacuum tube and do it the old way. Other electronics packages simulate the effect. The "tube-type" distortion is preferrable to many over the kind of distortion produced by solid-state amplifiers because the tubes just gradually rounded over the peaks as they went into distortion, whereas the solid state devices just chop off the tops of the peaks cleanly at the supply voltage point, producing a harsh distortion. One type of distortion device, employed as a distortion pedal, was called a "fuzz box".
Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.
Yeah. He may have to sit down when he plays, but he’ll have you on your feet when he does. BB’s creamy yet piercing tone, his unique vibrato and his absolute flawless ability to express his emotions through the guitar earn him a spot in the top ten. King’s years of fame haven’t gone to his head. He is still as humble as ever giving front row seat tickets to fans waiting in a cold parking lot just to have a glimpse of him. BB King can’t play chords. Nor does he sing and play at the same time. But he has worldwide recognition of his accomplishments as an artist. That’s a mark of a truly great guitarist.
Let's face it: Big, high-powered guitar amplifiers full of sizzling tubes capable of frying an omelet are fun, and the sound of an electric guitar playing through one has been pervasive in popular music since the 1960's. They're sometimes very loud as well, and sustaining the volume levels required whilst attaining those majestic, exotic or extreme guitar tones for any appreciable length of playing time in one's house or apartment without interruption from family, neighbors or the police is generally impossible. Don't fret over it. We'll discuss a variety of solutions for the volume problem later on.
The far mic will give you a bigger, more heavy-metal type of sound with a more pronounced bottom end on it. The reason for that is low end sound waves take much more distance to fully develop than high end waves. Someone once told me that a low E note on a bass guitar takes thirty-three feet to fully develop. Whether or not that is true will only be known by people who have enough time on their hands to calculate such things. I do know that if you take a tuning fork that's vibrating with a high note and stick it in the imaginary puddle of water, it will generate waves that are small in comparison, and closer together than what a low note will make. Simple physics.
The D-55 is Guild's dreadnought, very similar in shape to the all-conquering 14-fret Martin on which it's based. However, if your used to a handful in the neck, the D-55 dreadnought makes for quite the contrast: a gloss neck, and slimmer nut accentuating the neck's overall thinness; more a D than a C profile, to invite comfortable first-position chords, aided by an impressively low action. That Adirondack bracing is doing its job, too, because string separation, definition and dynamic range are all notable and it feels loud, alive and resonant when playing soft or hard. If this guitar is anything to go by, the latest Traditional models are absolutely up there with the other big American names, offering superb quality craftsmanship and world-class tone. The D-55 is a potentially serious workhorse that has every likelihood of outlasting and outperforming any one of us as long as we can keep on picking - a sumptuous strummer.
It’s as simple as it gets: On/Off, Tone and a “clean-to-drive” Volume switch that becomes dirtier at higher volumes. Anything else you will need stomp-boxes, which this amp pairs well with thanks to its no-frills concept. Just do yourself the favour and invest in high-end pedals – otherwise you will ruin the amp’s exquisite tone with unsuitable digital effects.
In 1950 and 1951, electronics and instrument amplifier maker Leo Fender through his company, designed the first commercially successful solid-body electric guitar with a single magnetic pickup, which was initially named the "Esquire". The two-pickup version of the Esquire was called the "Broadcaster". The bolt-on neck was consistent with Leo Fender's belief that the instrument design should be modular to allow cost-effective and consistent manufacture and assembly, as well as simple repair or replacement. The Broadcaster name was changed to Telecaster because of a legal dispute over the name.
The earliest documented performance with an electric guitar was in 1932, by guitarist and bandleader Gage Brewer. The Kansas-based musician had obtained two instruments from George Beauchamp of Los Angeles, California, and he publicized his new instruments in an article in the Wichita Beacon, October 2, 1932 and through a performance later that month.
The descriptions that follow are very broad, but if you look around the guitar world you can usually pin any solid-body guitar down to one of these general categories. Of course you’ll see wild shapes like the Gibson Flying V, Ibanez Destroyer, Dean ML and Jackson Rhoads. They may look like they’re from another planet, but if you check their specs you’ll see they follow the same basic design principles as any other solid-body electric guitar.
Rock’s ultimate minimalists, Earth reduced heavy-metal thunder to a blissful rumble in the clouds. Their pioneering 1993 drone suite Earth 2 — pulseless, fearless, relentless — was little more than Dylan Carlson’s guitar chugging away on a note or two for 73 monolithic minutes. Relieving metal and grunge from any pretense that wasn’t distortion, menace, or catharsis, Carlson found a headbanger/shoegazer home between the primal and the O)))therworldly.
Joe is a musician, engineer, and producer in NYC. Over the years, as a small studio operator and freelance engineer, he's made recordings of all types from music & album production to v/o & post. He's also taught all aspects of recording and music technology at several NY audio schools, and has been writing articles for Recording magaz... Read More

As a rule, acoustic guitars with laminated spruce tops do not have the same resonance as those made from unlaminated tonewoods, but the Fender FA-100’s fuller dreadnought design provides a richer tone than some customers may expect. If price is a consideration, the Fender has been described as a “cheaply made guitar with a fantastic sound.” What’s more, When you buy a Fender product, you're investing in quality. The Fender Musical Instruments Corporation has been manufacturing instruments and equipment since the 1940s.
PUENTE HARDTAIL Para cambiar las cuerdas, pase las nuevas cuerdas por los ojales correspondientes situados en la parte posterior de la guitarra y llévelas por encima de la silleta. Puede ajustar la octavación girando el tornillo de octavación situado en la parte posterior del puente con un destornillador Phillips para desplazar la silleta adelante o atrás.
By the late 1970s, costs of manufacture in Japan had risen to such an extent that it was difficult to make student-grade guitars over there. It was far less expensive to manufacture instruments in Korea. Numerous factories were built, and existing facilities in Korea were expanded. Samick built a factory capable of producing one million instruments a year. Japanese companies invested heavily in Korea so that they would be able to produce their low-end models in Korea and high-end models under the same brand names in Japan. The early Korean-made instruments were not as good as the Japanese ones, but it did not take nearly as long for Korean quality to improve as it did for the Japanese to go from making crude low-end models to sophisticated instruments suitable for professional use. The Koreas had the benefit of all of the Japanese experience especially in the cases of factories with Japanese ownership or management.
Guitar pedals, sometimes called effects pedals, provide an easy and effective way to modulate your electric guitar's tone. The order of your pedals well ensure the best tone, but what tone that is depends on your personal preference. While there are basic guidelines, there's really no right or wrong way to order your pedals. To set up guitar pedals, learn the basic guidelines and experiment to find the arrangement that best creates the style and tone you want in your music.[1]
An excerpt: “Scorned, laughed at, jeered, chided, and derided. The concept of the solidbody electric guitar was subject to such utter disdain in some corners that it’s almost hard to believe it ever came to be at all. The ridicule and mockery would have been enough to send a less self-confident inventor running for the hills. Given our more than 55 years of perspective, though, we know it just had to be; a world without the solidbody guitar? Moreover, without the Gibson Les Paul? Unthinkable ...”
As early as 1924 or so, Lloyd Loar had experimented with amplifying acoustic instruments, though it would not be until the ’30s that his efforts would pan out (without great commercial success). He was undoubtedly ahead of his time. The only amplifier technology available to Loar was primitive radio amplification, hardly adequate for cutting through the horn section. As the ’20s progressed, Hollywood invented “talkies,” and huge valve amplifiers were developed to fill theaters (the music trade press at the time repeatedly published essays assuring musician readers that talkies would have absolutely no effect on the jobs of theater organists!). Part of this technological development included the invention of more and more tubes and the improvement of older designs, which increased the possibilities for instrumental amplification.
By the late twenties, the idea for electrified string instruments had been around for some time, and experimental banjo, violin and guitar pickups had been developed. George Beauchamp had himself been experimenting with electric amplification as early as 1925, but his early efforts involving microphones did not produce the effects he desired. Along the way Beauchamp also built a one-string test guitar made out of a 2X4 piece of lumber and an electric phonograph pickup. As the problems at National became more apparent, Beauchamp’s home experiments took on a more rigorous shape, and he began to attend night classes in electronics as well as collaborating with fellow National employee Paul Barth.[1] When the prototype electric pickup they were developing finally worked to his satisfaction, Beauchamp asked former National shop craftsman Harry Watson to make a wooden neck and body to which the electronics could be attached. It was nicknamed the frying pan because of its shape, though Adolph Rickenbacker liked to call it the pancake.[6] The final design Beauchamp and Barth developed was an electric pickup consisting of a pair of horseshoe-shaped magnets that enclosed the pickup coil and completely surrounded the strings.[1]
As I commented above, my go to method for quiet practice is a PocketPod with Shure headphones. But, who doesn't like plugging in to an amp every once in a while? I live in a house, but the neighbors are close. The amp I use is a Fender Super Champ XD, which is a 15w tube amp with some digital effects. It seemed quiet enough at low volumes, but your mileage may vary. If I were you, I would at least give one a listen at a music store and see if it can do what you need.

Stop tailpieces are usually paired with two types of bridges. The most basic is simply a wooden or metal bar with grooves that strings pass through. Most Gibson guitars come with another of the company’s early electric era innovations, the tune-o-matic bridge. Tune-o-matics have adjustable individual saddles for each string and are therefore more desirable for most players looking to control their instrument’s action and intonation.
Alan Parsons: "I always use condenser mics on a guitar amp, never dynamics — they're too telephoney. That's an unfair expression for a very good dynamic mic, but by comparison to a condenser, you're not going to get the bottom end." While this stance is more hard-line than that of most engineers, condenser mics are, of course, regularly used for recording electric guitars. However, in practice they rarely seem to be used on their own and are very often lined up alongside the trusty SM57.

4. Vox VT40X 40-watt 1x10 Combo Amp ($249.99): The Vox is another modeling combo that utilizes a Valvetronix tube preamp to give you the sound qualities of a tube amp. With 13 onboard effects, you can channel quality effects without having a pedalboard at your disposal. Vox’s Virtual Elements Technology has allowed them to carefully recreate up to 20 realistic models of very sought-after amp tones, all within an attractive looking package.


Similar to Jackson guitars, B.C Rich is famous for their sharp jagged edges and heavy metal sounds. The influence of their hard rock and heavy metal sound spans decades. Bands such as Motley Crue and Slayer are just a few of the bands that made B.C Rich guitars such a huge staple in the world of heavy metal. When you see the shape of B.C Rich guitars, there is no doubt as to what kind of music is going to come from them. B.C Rich offers a decent selection of guitars ranging from beginner up to pro-level instruments. They even have models that don’t have that signature “heavy metal” jagged style. Most B.C Rich guitars have a mahogany body and at least some of the components are made from rosewood. Obviously, the quality depends on the price, but even their highest priced models could still use a few upgrades to really bring up the sound quality.
I have a 12-string Lyle in really good shape. Bought as a b-day present from me back in late 1970's from a pawn shop. I need to take it to a luthier to have it set up better, but it sounds really good. Just right now the action is a little high, but not that much wear. For a long time, I put it away, finding it hard to chord as a relative newbie back then. But now, I am more than ready. It does say it was made in Korea ~ which makes it seem a little more rare. The sound is still great or maybe even better! Wish I knew what it was worth, but I hope the guy I find to set it up will know more.
I couldn’t find a professional review of the Les Paul Express. The last time we checked, it had earned an average of just 3.8 stars out of 5 in 17 user reviews on Amazon, but most of the complaints I found on Amazon and elsewhere were from people who got samples that weren’t set up well at the factory. This wasn’t true of our sample, but it was true of the other Epiphone sample we received—and it was true of many of the cheap Epiphones I played in stores.
On September 6, 2018, the company announced that a global settlement has been reached with respect to the company’s reorganization plan upon emergence from Chapter 11. Under the plan, the company will be focused on its core musical instruments business with "essentially no debt." Current Chairman and CEO Henry Juszkiewicz will step down as CEO and assume the role of consultant. With immediate effect, Brian J. Fox, the company’s CRO, will oversee daily operations until a new CEO is appointed.[59]
In fact, at the beginning of this article I mentioned John Mayer’s song, “I Don’t Trust Myself.” The way that guitar tone is achieved is by using a filter pedal called the AdrenaLinn III. That effect is a beat-synced filter effect, meaning it has the ability to sync up the sweeping filter with the rhythm of a song. This is accomplished by either tapping in the tempo on the pedal, or setting the tempo with the tempo knob.
You may love only one style of music. And that’s fine. But try playing some other styles. Funk maestro Carlos Alomar went through hell on David Bowie’s Scary Monsters (and Super Creeps) album, being asked to play more “grinding” guitar alongside Robert Fripp. “It was very interesting,” says Alomar. “I learned a lot and when I came back to my more natural style, I felt really fresh about it.”

The Vox AC30CH Guitar Amplifier head contains all that gorgeous AC30 tone thanks to the classic 12AX7 tubes in the preamp and EL84 tubes in the power amp,. However, you have the option of hooking upo your own cabinet to mix and match the sound, or complete your set up with Vox V212C Speaker Cabinet or even the limited edition VOX V212C Extension Guitar Speaker Cabinet, White Bronco.


Again, if a Martin guitar needs a neck set, don't try and solve the problem of high string action any other way! Take the guitar to a *good* repair person, pay the money, and have a proper neck set done. A good neck set will make the guitar play and sound the best it can. With the correct neck set and bridge and saddle height, the guitar strings will drive the top of the guitar best, giving the best sound possible, and at the ideal playing action. And after all, isn't that what it's all about?
Let’s start off with a real classic for a classic player! This Fenders vintage modified style Strat hss has captured the happy way of the 50’s, available in Surf Green, Daphne Blue and Fiesta Red and it’s a guitar that just makes your life a litter bit more worth living. The design is very much like the 1950’s electric guitars, from the soft V-shaped neck, maple fretboard and 8-hole pickguard down to the smaller things, like the knobs and the switch tip- everything just brings us back!
Ibanez is the most important Japanese guitar brand, and this new book tells the story of the electric guitars the company has made since the late 50s. The story tracks the fortunes of Ibanez from its early years as a copier of prime American models to later success as a creator of impressive original designs. The big break came in the late '80s with the launch of Steve Vai's JEM models and the related RG design, which have ensured Ibanez's popularity among metal and extreme rock players. Players include George Benson, Phil Collen, Allan Holdsworth, Pat Metheny, John Petrucci, Lee Ritenour, Joe Satriani, John Scofield, Mick Thompson, and more, many of whom are featured or interviewed for this book. With a gallery of full-color pictures of famous guitars and players, a reference section detailing production years and specifications, and a section covering how to interpret serial numbers. 160 pp.
For example, in the guitar (like other stringed instruments but unlike the piano), open-string notes are not fretted and so require less hand-motion. Thus chords that contain open notes are more easily played and hence more frequently played in popular music, such as folk music. Many of the most popular tunings—standard tuning, open tunings, and new standard tuning—are rich in the open notes used by popular chords. Open tunings allow major triads to be played by barring one fret with only one finger, using the finger like a capo. On guitars without a zeroth fret (after the nut), the intonation of an open note may differ from then note when fretted on other strings; consequently, on some guitars, the sound of an open note may be inferior to that of a fretted note.[37]
Vox entered the "lunchbox" amp market in 2009 when it introduced the Night Train (NT15H) head. This compact, all valve amp is a 15W head with two 12AX7 preamp tubes, a pair of push-pull EL-84 valves in its power section, and a solid state rectifier. It uses a cathodyne splitter, and its power section is cathode biased. The amp is solidly constructed on a black steel chassis with a bright mirror chrome finish, diamond-perforated steel tube cage, giving it a physical appearance reminiscent of a lunchbox (some comparisons to a toaster have been made as well). The NT15H also set the cosmetic and operational template for two additional releases, also all valve heads, that book-ended its output power: the 2W Lil Night Train (NT2H) in 2010, which uses two 12AX7 preamp tubes and a 12AU7 dual triode as its power section, and the 50W Night Train 50 (NT50H) in 2011, a two channel head with four 12AX7 preamp tubes and a pair of EL-34 valves in its power section. All models feature the ability to choose between the familiar "chimey" Vox voice and a high gain voice that bypasses the EQ section, via the Bright/Thick switch. Note though that each Night Train model's feature set also provides some unique capability apart from its siblings. For example, the NT15H output power can be switched between 15W pentode and 7.5W triode modes. The NT2H provides a headphone/line out jack with on-board speaker emulation (for practice or direct recording use). Lastly, the NT50H offers two channels by adding a second,optionally foot-switchable, higher gain "Girth" channel, a "Tone Cut" control and a "Tight" switch in its master section, plus a bypassable, JFET-driven effects loop. All models were designed for use with most any 8 ohm or 16 ohm cabinet, although Vox also offers a matching cabinet (NT15H/V112NT, NT2H/V110NT, NT50H/V212NT) for each model.
Note that the information presented in this article is for reference purposes only. Antique Electronic Supply makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.
Let me begin by saying this guitar is really good right out of the box. It has a booming sound, and really fills a room even when not plugged in. However, to make it really shine, you should perform a basic setup. I replaced the saddle and pins with bone and sanded the bone saddle down to lower the action. The nut is good from the factory. I also oiled the rosewood fretboard and added Martin phosphor bronze medium strings. After doing this work, the guitar sounds every bit as good as my 90’s Martin DR which is stellar. At this price range, I didn’t expect much, but what I received was a very pleasant surprise. Don’t hesitate to buy this package!

A nice twist on this Squier is the use of a humbucking pickup in the bridge position, which is the reason for the HSS moniker (Humbucker-Single-Single). Humbuckers—two single-coil pickups sandwiched together and wired out-of-phase so they cancel out noise—are much quieter than single-coil pickups. However, they don’t have the trebly twang of single-coil pickups. Most rock guitarists use the bridge pickup most of the time because it has a brighter, more cutting sound than the neck pickup, so in most situations the HSS Bullet Strat will deliver a robust and hum-free sound.
Play a classic 6120 or Duo Jet and it can seem a bit, well, old-fashioned. A growing number of players desire the brand’s looks, sound and unmatched vibe, but also want something a tad more versatile and user-friendly. Enter this latest Players Edition model with its neck set lower into the body for improved access, higher-output Filter’Tron-style humbucking pickup (Full’Trons) and a modernised Bigsby vibrato where through-stringing replaces the notorious ‘hooking the ball-end over a peg’ system that scuppered any chance of a quick change. Mate these modern tweaks with another recent innovation (for Gretsch, at any rate), the Centre Block range, and you have a guitar ready to compete with anything out there - in virtually any style.
The Epiphone Les Paul-100 Electric Guitar is another renowned guitar by the Epiphone Company. This guitar comes with 700T Humbucker pickups and the fretboard of the guitar is made out of rosewood. It has separate tone and volume controls to make it more user-friendly. The body of the Epiphone Les Paul-100 Electric Guitar is made from mahogany but has a maple top. It's thanks to the mahogany body that this guitar produces such a great sound. For a beginner, this instrument is a must-have.
If you want to take your tracks to the next level, a multi effects processor can do the trick. For a high-end example of what one of these units can do, check out the Eventide H8000FW 8-Channel Ultra-Harmonizer Effects Processor. It supports 24-bit audio and comes with an impressive 1,600 pre-set effects. Some are even pre-customized for 5.1 surround sound, so production for home theater playback is a cinch. Its smorgasbord of I/O options includes AES/EBU, ADAT, S/PDIF and FireWire with sampling up to 96kHz, so whatever you're looking to connect to the H8000FW, it's a safe bet that you can get the job done. Of course, not all of the processors here are quite as advanced. There are plenty of setups out there that just need a straightforward solution, and if that sounds like yours, don't worry: you'll find plenty of those here as well. Take the TC Electronic M350 Reverb and Effects Processor, for instance. This single-space rackmount is easy to fit into any budget, living up to TC's reputation of delivering amazing bang for your buck. It's loaded with 15 different effects plus 15 reverbs, and even includes control software for your AU/VST environment.
One problem with adding a tweeter to a bass speaker cabinet is that the tweeter may be damaged by the overdriven amplifier tone that is popular in some musical genres, since overdriving the amplifier adds a great deal of high frequency information to the signal. Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets produced by manufacturers such as Gallien-Krueger and Carvin and other manufacturers allow bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn, which prevents this problem. Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
Black trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Except I wasn’t. Because, really, I could only make two types of sounds. There was the clean, flat, boring, plugged-in-acoustic one. Or I could push the little red button on my starter amp and get a muddy, cloudy, mess of a distortion. However, I was, at this point, somewhat blissfully unaware of what I was missing. I made do with what I had and spent my evenings rocking my house (sorry family).

PICK GUARD - KRAMER 450 - LO GIBSON - GOLDTOP - GIBSON SG CUSTOM SHOP - THUNDER JET - TAKAMINE - GIBSON 1959 - 450 12 - 66 ES-330 - 1972 - HAGSTROM F-300 RED LEFTHANDED - GIANNINI - BALLADEER - WHITE LES PAUL - HAGSTROM BRIDGE - CONRAD - LES PAUL 1953 - PROJECT - WASHBURN EA27 - KALAMAZOO KG - FRAMUS BASS - BASS VI - 1967 - ES-330 - HOLLOW - 1981 LES - BALDWIN BABY BISON - STELLA ACUOSTIC - MARTIN N-20 - VAN EPS - LES PAUL RECORDING - PIG - MARLBORO - HAGSTROM F12-S - FENDER STRATOCASTER 63 - LS 6 - HARMONY - J-45 - UNIVOX BASS
In January 2017, Vox introduced the MV50 amp head and amp sets. Described by Vox as a hybrid amp, the amp heads are called the MV50 AC, the MV50 Clean, and the MV50 Rock. When paired with the BC108 cabinet, each is then described as the MV50 AC set, the MV50 Clean set, and the MV50 Rock set respectively. Vox states the MV50 AC is designed to provide the sound of a VOX AC30, and that the MV50 Clean is designed to provide clean tones with a lot of headroom as inspired by the sound of American amplifiers. Vox states the MV50 Rock is designed to provide the more aggressive high gain sound of vintage British amps. In January 2018, Vox announced two new MV50 amp heads: the MV50 Boutique and the MV50 High Gain.

A note on right versus left when referring to the hands. Traditionally all guitarists, regardless of right or left hand dominance, were made to play a right handed guitar, most likely due to the lack of left handed instruments. To this day left handed guitarists and guitars are still fairly rare. When guitarists refer to the right hand, it can be assumed to mean the plucking hand, while the left hand is used to fret the strings.

The #1 cause of fret wear is the fretting hand pressure exerted by the player.  I have some clients that grip very tightly and wear frets quickly (Rob Fahey), and some that grip very lightly and take forever to exhibit significant wear (Jasan Stepp, Dog Fashion Disco/PolkaDot Cadaver).  Fret material hardness, string hardness and frequency of use all contribute to wear as well, but hand pressure is still the leading cause since frets do not wear themselves out.  Technique is different for every player, unique and personal and habits can be hard to change.  Just like brakes in a car, how hard and how much something is driven directly impacts wear and longevity.  Please see the refrets page for further thoughts on this topic.

An octave pedal listens to what note you’re playing and adds the next octave up or down (depending on your settings) making it sound like someone is playing the octave note with you. If you’re familiar with guitar or just learning, you’ll know that an octave is the distance between one musical note and it’s corresponding note at a higher or lower pitch. For example, if you play an open E string and then play the E string on the 12th fret, it will sound the same, just an octave higher.
Plugged into a Fender blue deluxe, this instrument immediately proved to be a love at first riff. The humbuckers sounds so amazingly, and coupled with great and rich percussive and natural full tone, that overall sound that emanates from this instrument is far beyond what is normally expected for a beginner’s piece. The fact that it is made in China has nothing to do with its quality. This might just be your favourite new ax.
If there is one body shape out there that everyone will recognize, it is this one. In terms of finish, Fender chose a lacquer clear coat to show off the natural wood instead of their usual choice, and it looks pretty awesome (of course there's a 3 tone sunburst and olympic white too). Made of ash, this particular Strat offers a U-shaped maple neck with a maple fretboard that is bolted onto the body. In terms of pickups, we have a set of three single coils belonging to their vintage line. These come with Alnico magnets, giving you that classic tone we all love so much. The hardware follows the canon as well. Here we have Fender's well known synchronized tremolo bridge paired with a set of F tuners on the headstock.
I have been playing Guitar and Bass for over 40 years. The items in this article not only enlightened me by explaining things that I did not even know, It helped me decide to make some changes to my current guitar, rather than spend a bunch of money on a new guitar that would probably be inferior to what I currently own. THANK YOU to the folks who furnished this information.
Norma branded guitars all came from the import/distribution company Strum and Drum located in Wheeling, Illinois.  Lots of people think Norma came from Norma Jean (Marilyn Monroe), but actually the Norma name came from the owner of the company, Norman Sackheim!  Norman and his son Ron began to import Japanese guitars around 1965, and continued into the mid 70s.  Initially all Norma guitars were made at the Tombo factory in Japan, but by 67 there were at least 8 different suppliers of Norma guitars!Build quality and construction really varied greatly with Norma guitars, but Norman and Ron did have a good eye for unique designs and many Norma guitars featured some of the coolest shapes of the 60s!  Just like this 4 pickup monster!  What I always liked about Norma guitars were the cool features like neat inlays and interesting pickups.  These darn things just had style!While I was in Japan in 2013, I met with the Japanese buyer of Norma guitars.  A close friend of the Sackheims, this gentleman travelled Japan during the 60s and searched out cool guitars to supply to Strum and Drum.  It was a unique arrangement, and it was simply fascinating to listen about the old days of Japanese guitar production.  When you peruse Norma catalogs, you’ll often see models come and go quickly.  And there were always lots to choose from, year to year.

Ibanez, a guitar and bass manufacturer, came to prominence as a result of music legends like Steve Vai and Joe Satriani using this brand. These guitars provide an exceptionally uniform neck action, a highly versatile tone, and top of the range pick up configuration. One of the main reasons that this brand gained popularity was the effective tone from cheap and mass-produced instruments. Heavy music is what they excel in, and metal enthusiasts have been loving Ibanez for decades now. They manufacture guitars for every style and genre. The most iconic model is the RG, but S series is also loved by all. They are also the makers of the 7-string guitar, with the first model Universe being made in the year 1990.
There are quite a few types of guitar shapes, with the most popular one being the dreadnought. However, contrary to acoustic guitars, many acoustic-electric variants come with some form of cutaway for better access to the higher frets. This can really come in handy for a wide range of techniques so you don’t have to play with your hand over the body, which can be uncomfortable.
Hertz Guitar company was originated from Shanghai/China & North Korea. This brand of guitars produces electric and other wide range of guitars that can be used in studio recordings and live shows. This brand also manufactures guitar accessories. The starting price of guitar from this brand is 12,504 INR approximately. Anyone looking for an affordable electric guitar at a beginner and advanced level can buy this brand of guitar.
The best guitars?  Look at what the best players use.  Certainly Gibson and Fender are in the mix, but these are typically priceless, early production or highly customized one-off units.  If you want something more or less off the shelf that is in the same range of build, tone and feel quality look at the following (BTW, you can't get these at Guitar Center, which is probably why they haven't been mentioned yet):

The original electric guitars were hollow. Well, scratch that — the original Electric Spanish guitars were hollow (stick with us for the third installment of “Fundamentals of Guitar Anatomy” on pickups. The first pickup was made for a lap steel guitar!) Gibson took the words Electric Spanish and turned them into an acronym — ES. We commonly refer to these as hollow body guitars.


The ‘HSS’ refers to the pickup combination, with a humbucker and two single-coils, which is a versatile arrangement for both clean and distorted playing, especially when coupled with two tone controls and a five-way pickup selector switch. An excellent price for a good brand, and perfect for newbies. Make sure to check out the full review of this guitar.
In January 2017, Vox introduced the MV50 amp head and amp sets. Described by Vox as a hybrid amp, the amp heads are called the MV50 AC, the MV50 Clean, and the MV50 Rock. When paired with the BC108 cabinet, each is then described as the MV50 AC set, the MV50 Clean set, and the MV50 Rock set respectively. Vox states the MV50 AC is designed to provide the sound of a VOX AC30, and that the MV50 Clean is designed to provide clean tones with a lot of headroom as inspired by the sound of American amplifiers. Vox states the MV50 Rock is designed to provide the more aggressive high gain sound of vintage British amps. In January 2018, Vox announced two new MV50 amp heads: the MV50 Boutique and the MV50 High Gain.

There were precedents for the palm-muted, ultra-percussive chug James Hetfield gave Metallica (Judas Priest, Motörhead), but he made it the gold standard of Eighties metal. He's never been a monochromatic headbanger, though, delving early on into the delicate picking of "Fade to Black" and later embracing the more nuanced hard rock of the Black Album. "I wonder if James Hetfield knows how to play the drums," Dave Grohl once said. "Because basically he's taking care of the percussion and melody of Metallica's songs with his guitar. And it's great."

Native Instruments Guitar Rig VST plugin offers a free collection of various rack stacks that lets us try out typical effects setups of recent years. It can run in a DAW host or as a standalone. Do a Web search for "best amp synth" and you'll find more about what's happening with amp emulators -- along with maybe a link back to the excellent recommendations found in this thread.
The woods used on the body and neck are worth considering too, although are unlikely to be a defining factor when you consider your purchase. Basswood features heavily as the body wood of many guitars in this price range because it’s affordable and has decent tonal properties. You will also find cheaper to produce woods like poplar and alder, although the traditionally more premium mahogany is also found on affordable guitars these days.
An enduringly popular effect, with all sorts of uses for vocals, drums, guitars and synths, is genuine reverse reverb. This is where a reverb tail appears to increase in volume ahead of the sound that gives rise to it — a completely unnatural sound and something that's impossible to create in real time. It's easy enough to do in a DAW application though. First, find the section of audio you want to treat and reverse it. In the DAW I use, Digital Performer, there's an offline plug-in for this. Now apply conventional reverb to this 'backwards' audio — either by playing it through a reverb plug-in and recording it to another track, or by rendering it using an offline process (if your DAW offers this). In either case make sure you allow enough additional time at the end of the audio to capture the full, final reverb tail. In the screen grab I've done this by allowing 1500 milliseconds of post-roll processing.
Phaser – A frequency-based effect that makes a swirling, swooshing filtered guitar tone. Phasers use the principle of “phase” cancellation in which a filter passes over your guitar tone flipping the waveform at specific frequencies. This signal is then combined with your original guitar tone to give the iconic phaser effect used in songs by Van Halen, Pink Floyd and Smashing Pumpkins to name a few.
A guitarist’s or bassist’s effects chain can largely determine the uniqueness of that player’s tone. Perhaps the most common effects pedal is a distortion or overdrive pedal, which either provides a distorting effect or overdrives the guitar’s signal into the amplifier—a tone that is highly popular in many genres of music. Other popular effects pedals include a wah-wah pedal (designed for sweeping a guitar’s tone control), fuzz, delay, flanger, phaser, reverb, chorus, compression, looping and boost. Many guitarists also use an EQ pedal to further shape and customize their sound. With all the brands and effects available at Guitar Center, your effects pedal options are virtually endless.
NOTE: In these diagrams, the volume and tone controls are viewed from the rear. The volume and tone controls are variable resistors, also known as potentiometers (or "pots" for short). In electric guitars, the values for either of these usually is about 250K to 1 megohm. The capacitor in the circuit is for the tone control and these values usually are from .02 to .047 mfd (short for microfarad).

A continuation of the 7-string, adding another string a perfect fourth lower than the seven strings low B. The eight string guitars additional low F♯ string is just a whole step up from a bass guitars low E string. While luthiers have been building these instruments previously, mass-produced Eight-string electric guitars are a relatively recent innovation. Ibanez was first to offer a production eight-string guitar in March 2007.[46] Many other companies now produce mass-market eight-string models, yet these guitars remain relatively uncommon.
Description: Body: Maple & Poplar & Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple & Poplar & Maple - Neck Attachment: Glued - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Cream - Frets: 22 - Inlay: Pearloid block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ABR-1 - Cutaway: Double - Hardware: 2x Volume Control, 2x Tone Control, Grover Tuners - Pickups: Burstbucker 1/Burstbucker 2 - Pickup Configuration: H-H - String Instrument Finish: Faded Cherry - String Instrument Accessories: Hardshell Case, Certificate of Authenticity - Made In: America
How it sounds: Ex. 1a demonstrates the treble-cut control—nothing surprising here. Ex. 1b features the bass-cut. With a clean tone like this, it’s a bit subtle, though you can hear the difference if you focus on the low notes. But Ex. 1c adds a vintage-style germanium Fuzz Face with the gain and volume maxed. With the guitar’s tone control wide-open, the signal easily overpowers my vintage Fender brownface—your typical Fuzz Face fart. As I gradually trim bass via the guitar, the tone acquires greater punch and clarity. I remain on the neck pickup throughout—the only thing changing is the guitar’s bass pot setting. The extreme-cut settings near the end of the clip may sound harsh in isolation, but they can be perfect in a band context. At the end of the clip I max the bass pot again to underscore how much the tone has changed. It ain’t subtle.
Hi Jeff. I just wanted to point a couple of things that IMHO are not 100% accurate. Most probably its just to make things not too complicated, but I think is important to notice them. First, resistance is not frecuency dependant, and therefore it doesn´t have any effect on high frecuency content. However, Impedance does, and impedance is the resistance on the AC world (and a guitar signal is an AC signal). Therefore, the reason both long cables and pickups loose high frecuencies as they get longer is because the capacitance in them increases, and capacitors have a certain impedance (once again, resistance in the AC world). So you may actually be true, but its because of impedance created by the capacitance and inductance present on the pickup. Will continue..
Johnny Thunders’ snot-nosed New York take on Keith Richards’ cool is one of the pillars on which punk rock was built. An Italian-American guy (birth name John Anthony Genzale Jr.) from Queens, he was born a little too late to be part of the Sixties rock explosion. But the bands of that era were his influences, and he put his own spin on them in the early Seventies as the New York Dolls came together with Thunders on lead guitar.
The Supro aluminum Hawaiian lap steel was similar to Beauchamp/Electro’s “frying pan,” with a round body and guitar-like neck, very similar to the Rick, but with the top carved away to allow a little more access. Given the close nature of the L.A. guitar world, it’s entirely possible that all these aluminum guitars were cast at the same place. The head was three-and-three with a single cutout in the middle. The Supro had dot inlays on the fingerboard, with an alternating two/one pattern and four dots at the octave. A rectangular Supro logo plate sat between the pickup cover and the fingerboard. The pickup – the single-coil version of the Stimson design – was mounted under a raised cover (part of the casting) with a slit to reveal the bar polepieces. It had one volume knob on the treble side and was housed in small form-fit hardshell case. This was closest to Beauchamp’s patented electro guitar design, making the Supro brand a direct descendent of George Beauchamp. An important point to remember is that these cast aluminum guitars were made in Los Angeles.
After making your observations about the curve in the neck, make your adjustments of the truss rod, if necessary, until you have the amount of forward curve you are looking for. In the best case scenario this will mean that you end up with a slight forward profile, when fretting the 1st and 12th frets, usually no more than 1/32", focused in the 6th-7th fret area and tapering towards flat in either direction.
The two new Fender-style solidbody basses were the Precisely and Naked. The double-cutaway Precisely U1971 had a single pickup under a chrome cover, covered bridge/tailpiece assembly, Fender-style four-in-line head, dot-inlaid rosewood fingerboard, black-white-black pickguard with fingerrest, volume and tone. The Precisely had an outlined logo decal and a sunburst finish. The Naked U1971N was the same thing, natural-finished. Both cost $250.
You might be wondering: “Why the glossy finish?” Having a gloss finish can mean the difference between your guitar cracking—or not--in extreme temperature changes.Of course, like all Cordobas, there is a truss rod with which you can change the string relief, so you’re not having to press the strings down so hard, making it easier for beginners to learn.
The 2-6kHz region is good for adding bite or presence to guitar tracks at the mixdown stage.There is no 'right' electric guitar sound because the instrument has no natural sound, so you can use as much EQ as you like without feeling guilty. Even so, getting something close to the desired sound at source is always the best way to work. Should you need to use EQ, here are a few comments concerning the frequency areas you might want to tweak. Boxiness tends to occur between 100Hz and 250Hz, so if this is a problem, use a parametric to tame it. Experiment with the Q setting as you may be able to notch out a narrower section than you think to get the desired result. Cabinet thump can be accentuated by boosting at around 80-100Hz, but take care not to boost anything much lower than this, as you'll just bring up unwanted resonances and hum.
Solid-body electric guitars are the most common style on the market today. The first widely-available solid-body electric was the Fender Broadcaster, which later evolved into the Telecaster. It was super simple compared to other electrified instruments that came before it, and the basic design premise continues on in every solid-body instrument to this day.

With expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with "locking" nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use.
×