Many acoustic guitars come equipped with "light" gauge acoustic guitar strings. This is probably a good place to start - if you are a heavy strummer and find yourself breaking strings often, you may want to consider buying slightly heavier gauged strings. The following is a list of the standard string gauges included with each set of acoustic guitar strings.

Another popular method for keeping that signal strength is by way of a booster pedal which pretty much gives your signal a dose of added voltage in order to avoid degradation. Booster pedals become increasingly necessary when working with a signal chain involving a good number of pedals in order to keep that signal strong by the time it hits the amp, but depending on whether you just want to boost the overall signal strength or the strength of a certain effect, placement becomes important.

Being a sub-brand of Gibson, it is Epiphone's task to get the Les Paul design out to as many hands as possible, and they did just that with many various iterations of the classic single cutaway design. For this list, we chose Epiphone's tribute to Les Paul, who incidentally also worked with the company in the late 30's, which is a bit in the mid-tier price, but worth every penny.
1) Mic your guitar cabinet, running the mic signal into a simple mixer with your effect units patched in on effects sends and returns. Run the mixer into a power amp and full-range speakers, or powered full range monitor speakers (the “wet” cabinets), placed on either side of your dry cabinet. Set the effects units 100 percent wet and blend in the amount of effect you want into the wet cabs. Use a MIDI foot controller to change presets on the effects units, and add an expression pedal to control things like the output volume of the effect signal, or the feedback of a delay. For live applications, the soundman can mic your dry cabinet separately and take a stereo line-out signal from your mixer for the effects, panning the effected signal hard left and right in the PA. Guitarists such as Eric Johnson and Larry Carlton have used this approach.
A guitar tuner pedal is an absolute must have if you’re serious about guitar as it provides accurate tuning instantly and can even allow you to tune your guitar to alternative tunings such as Drop D, open tunings and more. Check out our top 12 Best Guitar Tuners blog for more info on guitar tuners. The absolute industry standard is the BOSS TU-3 tuner pedal - a must have.
“The bottom line is you get a better dynamic response from the coil. Most people who play a hand-wound pickup say it sounds more ‘open’. It’s easy to make a pickup sound brighter but to have a truly open voice it’s got to be dynamically responsive – and that’s what scatter-winding [intentionally irregular hand-winding of a pickup coil] does. Also, compared to a machine-wound coil, the frequency response is slightly extended. So the sound is bigger and you hear more not just in the high frequencies but also in the depths of the frequency response.”

Bring up the topic of electrics, and Martin is hardly the first name of recall. The term “electrics” is not meant to include the company’s many fine acoustic-electric guitars, many sporting top-notch electronics (which ultimately remain acoustic beasts), but rather electric guitars meant for country chicken pickin’ or raunchy rock and roll. However, beginning in the early ’60s, Martin has launched periodic forays into the electric guitar marketplace with some very interesting, if commercially unsuccessful, results (which explains why the Martin name doesn’t come immediately to mind). Most coverage of the Martin brand is focused, quite rightly, on their substantial acoustic achievements. For this essay, however, let’s take an alternative view and look at the company’s various electric guitars, its thinline hollowbodies and later solidbodies.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: old kraftsman","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"old kraftsman","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
This general tip applies to all so-called temporal effects. Anything that messes with the timing of the signal should come last. If you were to put reverb before distortion, which is often one of the first effects in a chain, that distortion would be applied to both the original signal and all of the echoes. In other words, you’d get a mess. Naturally, this isn’t a rule written in stone. There are always exceptions. However, it is best to start with reverb at the end as this is the most neutral position.

What started as an aftermarket parts company has grown into a real giant. ESP is a brand that is currently building some of the best guitars in the mid range segment of the market. Even though they are often associated with metal scene, ESP offers a wide variety of models. In all honesty, you will rarely find the same bang for the buck that ESP is capable of delivering. On top of that, their guitars are good looking as well.

I've recently seen Mayer, the Chili Peppers, Clapton, and Neil in concert and had an amazing time at three of those shows. Mayer was just bad, I like his blues tracks but the show was not worth it. The Chili Peppers on the other hand were outstanding – but they just didn't compare to watching Clapton and Neil burn the house down. That's one of the reasons I always feel like Tom Petty gets missed out – he might not play the fastest or most intricate tunes, but damned if he hasn't written a ton of iconic songs.
As with other plucked instruments (such as the lute), the musician directly touches the strings (usually plucking) to produce the sound. This has important consequences: Different tone/timbre (of a single note) can be produced by plucking the string in different manners and in different positions. For example, plucking an open string will sound brighter than playing the same note(s) on a fretted position (which would have a warmer tone).
Here for you is a beautiful Vintage 1964 Epiphone Frontier FT-110 acoustic guitar. This guitar is 100% original and comes along with it's original hard shell case. The guitar plays and sounds just great. These Epiphone guitars were made with a full 25 1/2" scale. The sound is just outstanding and the playability is fantastic. If you have any questions, feel free to either email us at or call .
Franklin Guitar And Repair was started in this space to sell on Ebay By David Wood and Josh Pewitt! before They knew it...there were enough guitars to open a store! David had been a road musician for nearly 20 years, and along the way he learned to set up instruments and do repairs himself. Franklin Guitar and Repair has grown in many ways, purchased by Pat Stockdale in 2016 and still maintaining quality work, and a mom & pop homey kind of atmosphere.
To create a thicker rhythm guitar sound, overdub the same part one or more times. Depending on the desired effect, the overdub can be treated as one mono signal and mixed to the same stereo position, or panned left and right for a stereo double-tracked sound. Alternatively, treat the original track with an ADT (Artificial Double Tracking) effect. This can be done with a digital delay set to around 40 milliseconds. Again, the delayed signal can be panned or mixed as one with the original guitar track.
In addition to acoustic and electric guitars, the company now also makes mandolins and ukuleles. Their mandolins are highly regarded, they “more or less rule in the bluegrass market” in the United States.[5] As of May 2012 the company has about 85 employees and manufactures six to seven acoustic guitars, three electric guitars, two mandolins, and two ukuleles per day.[4]
000-15: Base model of the upper end Martin Guitar line. All mahogany orsapele construction. ‘A Frame’ “X” top bracing, 14 frets clear, Optional model 000-15S 12 frets clear. All -16 and -16 series 000 instruments have long scales (25.4″) and 1-11/16″ nut widths, in contrast to the -18, -28, and -45 series, which have the ‘traditional’ 24.9″ 000 scale, retaining the 1-11/16″ nut width.
Solid-body guitars are made with solid sheets of tonewoods that make up the soundboard, back, and sides. Solid tonewoods tend to dry out and age better with time further evolving your music signature as the guitar ages. One such gorgeous solid-body guitar is the Seagull Artist Mosaic Acoustic Guitar that we have done a full review on. You could also see what the Yamaha A3R A-Series Acoustic Electric Guitar sports for a solid-wood body!
For the typical two-figure Boss pedal price, the RC-1 gives you the stereo connection, some onboard memory and a little more recording time. However you do lose the true bypass and analog dry-thru circuit that makes the TC Electronic Ditto so attractive to guitar players. Still, for acoustic rigs, I find the Boss RC-1 to be the most ideal looper pedal option and a better value than something like the Ditto. 
There are a few approaches you can take to get started browsing all this tablature. For example, you might start by looking for music that fits a certain theme. Alfred's 2015 Modern Christian Hits, the Hal Leonard The Ultimate Christmas Guitar Songbook and the Hal Leonard VH1 100 Greatest Hard Rock Songs are just three examples of tab books aimed at specific genres or occasions. Another idea would be to narrow down your options to tablature with included CDs; they give you the option to play along, making the songs easier and quicker to learn.
Finally we have the good old Jackson JS22 Dinky. This is more or less Jackson’s default entry level model. As such, it brings the type of performance every beginner wants. Especially if they plan on playing metal. The pickups on this thing don’t have a whole lot of range, but I’ve managed to squeezer a light fuzz out of them. There wasn’t much range, but the consistency of tone was more than satisfactory.
The descriptions that follow are very broad, but if you look around the guitar world you can usually pin any solid-body guitar down to one of these general categories. Of course you’ll see wild shapes like the Gibson Flying V, Ibanez Destroyer, Dean ML and Jackson Rhoads. They may look like they’re from another planet, but if you check their specs you’ll see they follow the same basic design principles as any other solid-body electric guitar.
The President was produced by Hofner in Bubenreuth, Germany, specifically for Selmer, who distributed the brand in the United Kingdom, Australia, New Zealand, South Africa, and other commonwealth nations. The President was a hollow body electric acoustic, available as a full body or thinline, and with blonde or brunette finish. It was a great playing guitar that sold fairly well in the second half of the 1950s, throughout the 1960s, and into the very early 1970s. The example shown here is a full-body depth guitar in blonde - and as a 1965 guitar, one of the last to feature the rounded Venetian cutaway. From late 1965 until 1972, the President sported a sharp Florentine cut. Naturally, such an electric acoustic suggests jazz and blues, but many of the original British Hofner President players were part of the rock 'n roll, skiffle and beat scenes of the late 50s and early 60s.

Yet another acoustic steel guitar for the right handed guitarists. It has 6 strings and mostly comes in tobacco sunburst without a case. The perfect design makes it suitable for use by beginner guitarists. The sides and the back are made of meranti, with a spruce top. It is quite cost effective, with prices ranging from around INR 8,500 depending on available offers. More about Yamaha F310 TBS can be found on the following website link.
As a general rule, I'll set up the 57 right against the amp's grill cloth, pointing it directly in to the speaker (sometimes at a slight angle from the outer rim of the speaker pointing toward the center). I'll usually place a condensor about two to three feet in front of the amp (at the same level as the amp) and point it at one of the speakers, and if I have another condensor available, I'll place it about five or six feet away, in front of the amp. I'll also raise the "far" mic to a height of approximately five or six feet off the ground.
The biggest determining factor on how easy a guitar is to play is the 'action' - distance from the strings to the neck. When it is very low it is easy to press the strings down to touch the fret; when it is too low the strings will buzz when you play. If a guitar's action is too high it will be very hard to play, and for a beginner, this can be pretty disheartening.
...Wow! I JUST bought this electric guitar from a pawn shop for 37 dollars. I could instantly tell it was a 60's guitar, so I had to have a closer look. Mine has the tailpiece clam, but it was missing the whammy bar, so my dad built me one. It didn't even work, at all. A good cleaning fixed that though, it now works perfectly. Now it's fun little piece of history.
Hi Torch, appreciate the work gone into this , fantastically informative piece. Good to see such a following as well , too many Gibson / Fender fanatics out there that dismiss Jap / Asian guitars as inferior. Having played god knows how many guitars over 50 years I've had good and bad in both top and lesser known brands. Started off at 15 years old with a Tiesco ( cost me £15 S/H at the time. lol ). Admittedly it was a piece of junk, but hey it got me started. Just picked up a Strat copy made in China for £10 ( as new condition) Branded Excell , out plays my Aria by a country mile. I have an old acoustic here about 40 years old, cost £62.50 at the time. No place of origin , serial No or anything. Imported by Rose Morris with the brand Avon on the head stock. This baby out plays any acoustic I've ever played, including a couple of Martins, As any guitarist should know a guitar is how it feels and plays not it's name. Nothing wrong with Jap / Asian guitars , could be made in Iceland for all I care it's the guitar that counts. Keep up the good work. Regards and thanks.
Today we are going to show you some of the best effects pedals from this category, which you can get right now. We have chosen a variety of flavors as well as price ranges, thus making sure that anyone can have access to a good reverb no matter what. More importantly, we want to use this opportunity to familiarize you with reverb as a guitar effect.
"I have purchased 15 personalized guitars from the top guitar custom shop. All the guitars have met or exceeded my expectations. Great workmanship and quality work. An exceptional group of people to work with. They are ready to answer your questions or concerns. The one time i had a concern about a guitar they responded immediately and handled the situation more than i expected. I highly recommend this company!" Dr E C Fulcher Jr - Abingdon, Maryland USA.
And its not just about the looks, because this affordable guitar comes with a solid spruce top with mahogany back and sides. This means that you are getting a mid-tier instrument for the price of an entry level guitar, a beginner guitar that will grow with you as your ears become sharper and you learn to play better. Because of its conventional build, this acoustic has a warm and balanced tone that can sound bland to some, but it should make for a great starting point for those who are still discovering their own musical voice.
Launch price: $599 / £500 | Body: Basswood | Neck: Hard maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 22 | Pickups: Manson Design bridge humbucker, Manson Design neck single coil | Controls: Volume, tone, 3-way selector switch | Hardware: Two-piece bridge and tailpiece, staggered height locking machineheads | Left-handed: Yes: MBC-1LH | Finish: Matt Black
Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered.[71][72] A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.[61]
Thanks for reading the fine print. About the Wiki: We don't accept sponsorships, free goods, samples, promotional products, or other benefits from any of the product brands featured on this page, except in cases where those brands are manufactured by the retailer to which we are linking. For our full ranking methodology, please read about us, linked below. The Wiki is a participant in associate programs from Amazon, Walmart, Ebay, Target, and others, and may earn advertising fees when you use our links to these websites. These fees will not increase your purchase price, which will be the same as any direct visitor to the merchant’s website. If you believe that your product should be included in this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.
Why is Mesa Boogie so low?! Have Mesa Boogie ever made a bad amp? Look how many guys endorse their gear. Have you ever tried a Dual Rectifier or Mark V? It will tear you to shreds. They are AMAZING amps. Best part, they're all tube. Line 6, why the hell are they fifth. Why are they in the top 15? They are nothing but crap digital rubbish. Play a real amp like a Mesa Boogie, line 6, pft. Mesa Boogie is the best amp brand by far. 

Marshall Chess assembled in his words "the hottest, most avant garde rock guys in Chicago" for the album sessions consisting of Pete Cosey (lead guitar, later with Miles Davis) Phil Upchurch and Roland Faulkner (rhythm guitar), Louis Satterfield (bass) Gene Barge (tenor sax), Charles Stepney (organs) and Morris Jennings (drums). Since Muddy wasn't as accustomed to this style, he only contributed vocals, but he still played an essential part in this recording. Electric Mud (1968) was mostly recorded in live takes with few overdubs and that off-the-cuff live feel that's captured on it makes it stronger. On the opener, "I Just Want To Make Love to You," pounding drums and Cosey firing out raw screaming guitar grabs your ear with Muddy's confident singing pushing the music along. The solo on this song is nothing short of phenomenal. The guitar starts playing some distorted melodic notes then morphs into this gigantic screeching feedback riff becoming louder and wilder then continues to morph from a tearing solo until it reaches this intense mind-bending groove that sounds on the brink of collapse. At this point, the guitar cuts out, leaving you breathless, with just drums and Muddy's voice building up back to the verse, then with an out-of-your-mind guitar and organ playing off each other to the end. The next song, "Hoochie Coochie Man," begins with an incoming guitar sound and has the opposite feel of the last track. Muddy's vocals seemingly come out of the speakers at you as alternating lines come from the left and then right, giving the listener a disorienting acid-like effect. A liquidy sounding guitar that washes over like a wave accompanies the verse and changes into an expressive wah-wah lead on the chorus. There's a great, fun cover of "Let's Spend The Night Together" which the Stones must have taken as a huge compliment, having their idol cover one of their songs. Muddy and the band turn it, around making it appear like he wrote it with a big mean sounding back melody, soulful distorted guitar lines and Muddy's commanding voice sounding the way he might have sung in a club in Chicago. "She's Alright" has a trippy beginning with bass notes fluttering up then swaying back down to open up to smash your head against the wall along with crashing cymbals matched by a dirty guitar that has real spirit to it. The song makes great use of cross-overs with a screeching guitar bouncing back and forth between speakers and then somehow transforms and ends with a pleasant distorted instrumental version of "My Girl." Original material was also written for this record like "Tom Cat" and "Herbert Harper's Free Press News," with the latter as a vaguely topical song about the sixties with lines like "world is moving much too fast" and "where ya gonna run to, where ya gonna hide" and a fuzzed out guitar that parallels the confusion and outrage of the lyrics. "The Same Thing" closes Electric Mud with a slow heavy blues feel to it and a stretched out, aching guitar on top.
As these same makers ramped up for digital production, digital choruses naturally joined the team. The effect as produced digitally might sound broadly similar, but it is done differently than in the analog circuits. Digital chorus pedals double a signal and add delay and pitch modulation to one path, the latter wobbling below and above the pitch of the unadulterated signal, which produces an audible out-of-tuneness when the paths are blended back together. It’s hard to fault the power and range of control that digital technology affords, and this version of the effect has been hugely successful, but many guitarists still prefer the subtle, watery shimmer of the analog version. Conversely, the same ears often find the digital variety makes them a little queasy.

Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Wood: Maple & Walnut - Fingerboard: Maple - Frets: Jumbo - Inlay: Black - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line, Reverse - Bridge: Lo-Pro Edge - Hardware: 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: DiMarzio - Pickup Configuration: H-S-H - String Instrument Finish: White
1. Blackstar ID:15 TVP ($229): This is one of the best combo amps on the market and with good reason: it comes with a variety of options to not only get you playing in no time. It also allows you to record very easily with a built-in USB option. You can select from six different power responses modeled after popular tube amp sounds (via Blackstar’s True Valve Power system) and even when turned down, the amp doesn’t lose its bite. The built-in multi-effects allow you to experiment with the world of effects and the Insider Software allows you to edit up to 128 user storable patches to further your sonic crafting.
As cool as these little amps are, they only have a fraction of the features you’ll find in their larger, more powerful big brothers. But, they are more than enough for a newbie to get started on, and they meet and exceed the criteria I outlined in the beginning as what to look for in a good starter amp: They sound good, they are flexible with good overdrive, multiple channels, solid EQ sections and some even have built-in effects.
On guitars with tremolo bridges, the bridge must be stabilized before any adjustments are made. Regardless of the manufacturer, the correct position for any bridge, under string tension, is going to be parallel to and essentially flush with the top (or up to 1mm, or so, above the top). Ultimately, we want the bridge assembly to sit such that we have a range of adjustability over the bridge saddles, so that we can dictate the preferred string height over the fretboard.
Wow! I don't even know where to begin... I am using this processor with my new Cecilio electric violin. I learned and trained on classical violin, acoustic, reading sheet music, etc, so I'm pretty new at now playing an electric one hooked up to an amplifier, and even newer at using a pedal/processor. Upon first assembly, I found that many of these effects will probably not be used in the music that I play (worship & praise - old school & contemporary), but others will be very useful to bring a new sound to old songs. Also, some of the effects sound very similar to one another. I haven't yet figured out and tried to edit and save any effects to my liking, so I can't really say how well the MG-100 does in that area. But I must say that I am absolutely in love with the drum machine ... full review
Forget Risky Business (remember the famous scene of Tom Cruise rockin' out in his boxers?); this technique, which I consider real air guitar, is serious business. It entails capturing the airy, percussive sound of the plectrum strumming or picking the electric guitar's strings-either in acoustic isolation or combined with the ambient sound from the amp-and then mixing this sound with the recorded amplifier sound. The addition of just a little percussive plucking can enhance the presence wonderfully for any style of guitar playing. In my opinion, it's the greatest studio-recording innovation since John Bonham's distinctive drum sound.
The case raised concerns for musicians who lack documentation of vintage instruments made of traditional, non-sustainable materials.[50][51] However, officials from the Justice Department and the U.S. Fish and Wildlife Service have stated that musicians who unknowingly possess instruments made from illegal wood would not be treated as criminals.[52]
I have an old Zoom 505 all in one pedal plugged into the clean channel of my Peavy Scorpion 2-12 amp. I’m using the distortion, chorus, reverb, delay, etc. programmed from my pedal. I want to add my Crybaby wah so it’s just a matter of easily just switching the order of both pedals and see what works best. Until I upgrade, it should be simple. Here we go. Thanks.
We’ll round this list off with a slightly different proposition, particularly with jazz in mind. The Fender Classic Series ’72 Telecaster Thinline is a semi-hollow guitar in the guise of a traditional solid body. It features the same body shape and size of a standard Telecaster but has its horizon’s broadened thanks to the internal routing of the wood and attractive ‘f’ hole on the guitar’s top. Two humbuckers – again, not traditional on a Tele – provide exceptional warmth and versatility. Combined with its high levels of construction and craftsmanship this a guitar which will last a lifetime.
You can set an octave to play the higher or lower notes or both at the same time. This is ideal for those who want to really thicken up their sound and are often used by heavy metal guitarists to make solos and riffs sound really cool! The Valeton OC-10 Octave pedal is a budget friendly choice and the Electro Harmonix Nano Pog is an industry standard option.
Anytime a single coil-sized humbucker is split, a tiny coil is the one seeing the strings, so the volume is going to drop. You can split to the other coil, or set the switch to wire the pickup in parallel, which will keep it hum cancelling. However, splitting to the other coil in a neck position Cool Rails probably won’t be a big difference in sound since the coils are pretty close together and pretty small.
SOLD OUT: Super condition its been kept in the case over 25 years WoW!... JVG just set-up and plays wonderfully no buzz no drag its EASY to play now and it has NO WEAR almost like owning NEW Vintage! Sounds good ! its loud and robust TONE this is a great deal on an absolutely wonderful guitar. This was well crafted in Korea in the late 1980's same as Japan spec incredible. Lots of vintage guitar for a great price Its woods are as follows... Top is Spruce nice straight grained and may be solid cant see a seam it is what it is as made, the back and sides are all a fine instrument grade mahogany as is the neck a medium slim profile neck feels great , the headstock has the rosewood overlay with Fender logo in mother of pearl with gloss finish to front headstock as the body is gloss front - sides and back and the back of neck smartly in satin finish to not show finger prints easily.. Fit and finish is rated JVG at very good - excellent vintage easily Near Mint rating I'm still looking for a dink and cant find one yet, but thats not to say there may be something minute somewhere but I looked it over good and she qualifies for near mint rating vintage and is WAY BETTER than average. The fingerboard I believe is ebonized rosewood and shows no divots at all... same with frets I polished them pre set up and I can attest they are excellent too... Neck angle and action is very good straight and as a result the action is set to within Martin spec and plays excellently with no buzzing. Original tuners on board and are good quality and do the job well, intonation on this guitar is good so it sounds sweet up or down the fingerboard... surprisingly great tone for a guitar anywhere near this price point, You will be very pleased. Comes with its original semi hard chipboard case black good all latches and handle are good, Here is a great sounding and playing Vintage Korean guitar that will be sure to please. Questions ? asl Joe .
The original dreadnought shape was launched by CF Martin, one of the big names in acoustic guitars, and was named after an old English warship. It features rounded shoulders, and the neck typically joins the body around the 14th fret. The dreadnought strikes the most even balance between volume, size and ease of playing, and for this reason it has been used by just about every big-named player you can think of.
Since digital effects use DSP, manufacturers have made the most of the processing power by adding amp modeling features. To the point that amp modeling has become a standard feature, and has even overtaken effects in popularity. If you already have a good amplifier, then amp modeling is not important, but it's still a good addition for the extra versatility amp modeling provides.

Here we are proud to have in stock today is a Cool one she's pretty rare too its a real vintage guitar its actually 42year old in fact. This is a great old Vintage Goya Acoustic Dreadnought Guitar by CF Martin & company. This guitar was built in the early 1970s in Japan when Martin had thought that it was a good way to address the Japanese high quality lower priced Japanese guitars cutting into their bottom line so Martin commissioned Goya of Japan to build their competitive to the US line "import" line ( Japan because no other country at that time was building anything close to the high quality guitars like Japan was making " China , India, Twain was not even a consideration Japan was in another league obviously to those countries... so Goya was commissioned back in the day this pre dates Sigma Japan... This was built durring the time frame when the Japanes builders had some of the best quality woods available to them and were setting out to show the world what they could really do. This is a great example with both fine quality qoods used from the high grade mahogany to the solid spruce top to the rich dark Brazilian rosewood looking fingerboards they selected wow impressive work...Kept in great shape all these years 42 years see the pics it looks more like its 3 years old then 42... here today for a song we believe this example was built in Nagoya by the great Terada, that is pretty much the Custom shop builders in Japan they are responsible for the GB10 George Benson Ibanez line, They made the high end Ibanez Artists, The Gretch reissues, some other fine models as well as their own Tereda guitars. On to this baby The top is book matched SOLID AAA Spruce and the sides and back are mahogany, probably laminated but they seam to match?. either way *AWESOME* The SB model has a beautiful transparent cherry sunburst finish that is still so glossy looking it can pass for much newer but its 36 years old!. The Neck is also solid AAA mahogany with a beautiful rich looking rosewood fingerboard may be Brazilian Rosewood . The neck is RARE with a nicely v shaped which feels really good to me I think you'll be please with the feel as well. Setup done by our in house luthier & plays like butta now with a new set of acoustic Martin 11's, a $150 value. Now how ya gonna beat that! .
Description: Body: Maple - Top Wood: Spruce - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: 22 - Inlay: Pearl & Abalone Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge Construction: Ebony - Cutaway: Single - Hardware: Gold, 2x Volume Control, 2x Tone Control - Circuit Type: Passive - Pickups: Super 58 - Pickup Configuration: H-H - String Instrument Finish: Vintage Yellow Sunburst - String Instrument Accessories: Hardshell Case
We are recording between June and July our new album entitled "Brutal Agression" which should be out in October/November, also we were recently invited to Rock al Parque in Bogota, which is one of the biggest festivals in Latin America, joining Cannibal Corpse, Havok, Symphony X, Internal Suffering and many more. After that we will play at other festivals such as Mamut Fest y more to be confirmed, then we will concentrate on album release and touring, which will be accompanied by one or more videos.
“Guitar has always been an extension of my thoughts without having to put it into words,” says Marcus. “It’s a form of meditation allowing my mind to cut off and to speak through the instrument.” Players often say this sort of thing and it’s often nonsense, but before you scoff, listen to the live medley on 2017’s Due North EP and you’ll hear the truth in this statement. A new King is born? We think so.
More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.
Two easily overdriven cathode-bias 6V6 output tubes deliver a sweet, harmonically rich tone, and the 5Y3 tube rectifier has the sag required for dynamics and touch sensitivity. This holy grail of vintage combos has been used by Neil Young, Mike Campbell, Rich Robinson, Mark Knopfler, Billy Gibbons, and countless others. If you can’t afford the original, more-affordable reproductions are available from Victoria, Kendrick and Clark Amplification, to name a few.
I haven't listened to all the amps on the list but found the Rivera Knucklehead blew away every Fender, Marshalla and Mesa in the shop when I was testing things out for the clean blues with a PRS. My daughter playfully plugged in a Gretsch baritone, cranked up the gain and Three Days Grace came screaming out with the finest quality. She agreed the Knucklehead was a win.
Also called tuners or machine heads, these geared mechanisms, usually mounted on the guitar's headstock, hold the strings in place and allow tuning the instrument by adjusting string tension. Most modern tuners have enclosed, permanently lubricated mechanisms. Strings are held in place on posts that are attached to knobs, which are turned to adjust string tension allowing the guitar to be tuned. Some tuners are designed to lock in place. This provides more tuning stability, and helps prevent strings from slipping loose from the tuner. It also makes changing your strings a little easier.

As of 2006, many makers, including Gibson, were manufacturing resonator guitars to the original inverted-cone design. Gibson also manufactures biscuit-style resonator guitars, but reserves the Dobro name for its inverted-cone models. These “biscuit” guitars are often used for blues and are played vertically instead of horizontally like a “spider” bridge.
Neck Construction – The neck part of the guitar includes the fretboard and headstock. The tuners are mounted on this part of the guitar. The width and profile of the neck affects the playability of the guitar. Most necks are either “C” or “U” shaped. In most cases, the fretboard is made from a thin layer of rosewood or ebony, but some guitars have maple necks. Fretboard have position dots and other inlaid markers that assist the player. There are generally 3 types of necks – bolt on, set neck and neck through.
The lower portion is reserved for two footswitches – each for one of two available effects. It’s a busy stompbox, that’s for sure. However, the versatility it offers is hard to top, and the tone quality is definitely on a high level. Depending on how serious you are about your reverb, Mooer TVR1 Shimverb Pro (click for full review) can be a real force multiplier if used correctly.
Every guitarist who bends or vibratoes a string to make it sing owes a debt to B.B. King. With influences as diverse as T-Bone Walker, Charlie Christian and Django Reinhardt, the late guitarist turned the blues world upside down in 1952 with “3 O’Clock Blues.” Almost overnight, the harmonica was supplanted as the primary solo instrument in blues, as guitarists scrambled to imitate B.B.’s soloing style, especially in Chicago.
The Les Paul Special VE has a Poplar body with a sleek look thanks to the Vintage Worn finish and no binding on the neck or body. The Les Paul VE is cut to the same classic profile of all Les Pauls and has a comfortable and fast Mahogany bolt-on neck with a 1960's SlimTaper D profile. The Rosewood fingerboard has traditional Pearloid "Dot" inlays, a 24.75” scale, a 14” radius, 22 medium jumbo frets, and a standard 1-11/16” nut. Just below the headstock is the famed “bell” shaped truss rod cover found on every Les Paul since the early '50s with “Vintage Edition” in white. 
When people ask "What are the guitar string sizes?" they really want to know about the gauges, the term referring to the diameter of the string.  The answer is... that's not quite how it works.  Yes there are standard gauges but in several standard sizes like light, medium, and heavy.  Each, when properly tuned, will exert a different tension on the guitar's neck and if you jump to another size you'll probably need to adjust the truss rod and get used to the new action of the fingerboard.
It's the neat switching that makes this very classic-looking Tele act a little differently. All the standard Tele pickup selections - bridge, bridge and middle (in parallel) and neck - are in place, but it's a four-way switch, as opposed to the standard three-way; the additional selection provides us with both pickups in series for a bigger, louder and more humbucker-like 'secret' sound. The volume control has the S1 push switch in the top of the control knob: pushed down, the parallel and series-combined pickup selections are out-of- phase, giving three additional sounds over the standard Tele. The Baja sticks relatively close, of course, to the classic 60s Tele recipe. The rosewood 'board and alder body just seem to give that lovely smoothness to the high end that will make it less ear-wearing, especially if you're swapping over from an older-style humbucking Gibson. The standard mix is typically classic, wider than a Strat's but still nicely textured; the neck pickup here sounds a little fuller than some older readers or vintage Fender electric guitar owners will remember.

Conventionally, guitarists double notes in a chord to increase its volume, an important technique for players without amplification; doubling notes and changing the order of notes also changes the timbre of chords. It can make a possible a "chord" which is composed of the all same note on different strings. Many chords can be played with the same notes in more than one place on the fretboard.

In the vintage setup, the pickup is wired to the pot lug alone, with the tone control capacitor being attached to the output side. This tends to allow the volume to be rolled off without losing too much high end. This is great for those who play clean rhythm by just lowering their guitar volume as opposed to switching amp channels or turning off a boost pedal. It’s old-school, and it works. The downside is that the tone control sometimes has to be rotated a bit more before its effects are heard.

Nothing says rock and roll quite like an electric guitar—and whether you're just learning to play or you've been practicing for years, the right instrument can make you feel like a rock star. Selecting the right match for you is a matter of personal taste and playing style, but the broad selection available at can help you find the guitar and the accessories you're looking for.
Solid state and modeling amps are great amps to use for practice sessions. As well to bring it for small gigs and recordings that require their services. That is the reason why it is really hard to tell which one is above and try to suggest that a particular amplifier is better than the other. Having an own thing is what really is important here, and besides if you really sound good. The gears you will be playing with will equally sound as great.

i have an old Dorado solid-body electric serial # 0726454 on the neck plate it says STEEL ADJUSTABLE NECK, then the serial number, then made in japan. it has abalone fret markers, and dorado is in abalone in the headstock, blonde finish white-black-white-black pickguard, and a funky trem. i was told once that maybe guild had made this guitar... seems pretty unlikely... and that it retains it's original value, it all seems pretty unlikely... but i don't know... please help!!!

hi-its the standard wiring for a strat-i have the push pull in the middle position-i have two wires going from two lugs on the push pull pot- one   giong to neck position on 5 way selector swich and the other to voloume on selector switch-when i have select     brige position when  i pull  middle pot i get neck and bridge -next position all three – middle position neck /middle .next neck middle and first position -neck=also if you put two tone  caps on one pot will it effect the pickup sound when it maxed to ten  and willit sound too bassy–thanks sean
That's what I'm hoping to address in this post along with clearing some common misconceptions too. The guitar world and community is very big on the vintage thing, and that has filtered down to replacement parts of course too. It is very easy to get lost in the world of 'vintage' style parts making an improvement in tone, so let's cast those notions aside here and look at the facts of why in some cases that's both correct and incorrect. Tim McNelly of McNelly Pickups put it really well in a recent social media post '..New electronics won’t necessarily make your guitar sound any different than it does now. New pots won't NECESSARILY change the tone if you don't know the exact value of the pots coming out..'. I think this is a really great way to put it and a great starting point for this post and discussion (feel free to comment too!).
Flexibility of the BOSS Katana-50 goes way beyond expectations for establishing a different path referencing to its predecessor the Roland type of practice amps. With 50 watts of power and a custom 12-inch speaker, the Katana-50 can deliver a commanding range of sound playing it clean, crunch, lead, and brown for electric and acoustic electric guitars. Moving on to other controls on the panel, it features customizable effects by using BOSS Tone Studio editor software and for adjusting sounds quickly, it has a dedicated gain, EQ, and effects controls. Tone setting memory is also included for storing and recalling all amp and effect settings.
The body of the guitar is usually made of wood; different types of woods are used by different manufacturers, and there is ongoing debate concerning which is best. Typical woods include maple, mahogany, swamp ash and alder for quality guitars, and plywood or pine for cheaper, less durable guitars. While the type of wood used in the solid body of an electric guitar will noticeably affect the sound it produces, the quality of the sound is most affected by the pickups which convert the vibration of the strings into an electrical signal, as well as the amplifier that's used to shape and model such signal. We could go on and on dissecting the technical aspects of electric guitars, and yet never get close to that which makes that music unique: it's soul. That's something that can be clearly felt and experienced by players and listeners alike, but which all the while can hardly be put into words. Enjoy the electric guitar music loops!

Ring modulator: A ring modulator produces a resonant, metallic sound by mixing an instrument's audio signal with a carrier wave generated by the device's internal oscillator. The original sound wave is suppressed and replaced by a "ring" of inharmonic higher and lower pitches or "sidebands".[70][78] A notable use of ring modulation is the guitar in the Black Sabbath song "Paranoid".[79]
I borrowed the above quote from an article on effects pedals by Robert Keeley (a maker of seriously fine effects pedals) which can help you remember the order to place your pedals. I have a few slight modifications and additions to this that I use, but this is a great way to remember the rough order quickly, and it comes from one of the great pedal masters.
Hi, my cousin gave me a bass guitar, the brand is called Cyclone by EKS Technology Inc. I looked it up and I could find barely anything. the bass has been in his garage since the early '90s and he told he that Fender bought the brand sometime around then, but I still can't find anything about the brand, apart from that they also produce electric guitars. almost as if the brand has been wiped from history. Any information regarding this brand would be gratefully accepted!

The 1952 Les Paul featured two P-90 single coil pickups, and a one-piece, ‘trapeze’-style bridge and tailpiece, with strings that were fitted under (instead of over) a steel stop-bar.[note 3] The weight and the tonal characteristics of the Les Paul were largely due to the mahogany and maple construction: maple is a hard and quite heavy wood, but was restricted to a cap over somewhat lighter mahogany, to keep weight under control.[note 4] In addition, the early 1952 Les Pauls were never issued serial numbers, did not have bound bodies, and are considered by some as “LP Model prototypes”. However, the later 1952 Les Pauls were issued serial numbers and also came with bound bodies. Interestingly, the design scheme of some of these early models varied. For instance, some of the Les Pauls of this issue were fitted with black covered P90 pickups instead of the cream-colored plastic covers that are associated with this guitar, even today. Of note, these early models, nicknamed “Goldtops”, have begun to gain the interest of collectors, and subsequently, the associated nostalgic value of this instrument is increasing.[note 5]
Guitar -> G-Lab True Bypass Wah Pad -> Keeley Mod Vox Wah -> INTO GIG RIG (and send to Strobostomp tuner) -> Keeley Compressor -> Ibanez Tube Screamer -> MXR Phase 90 -> MXR Distortion+ -> Zen Drive -> TO AMP FRONT INPUT (red cable) -> FROM AMP SEND (purple cable) -> Uni-Vibe -> Tape Delay -> EH Deluxe Memory Man -> G-Lab Dual Reverb -> TO AMP RETURN (blue cable).
There have been a series of the Boss RV pedals, some of which have included delay as part of the package. The RV-6 doesn't brand as a reverb/delay pedal, but it does have a "+Delay" mode that incorporates it into the reverb's decay trail. While it doesn't quite meet the same decorated feature list as the HOF (no true bypass, no analog signal, less modes) the RV-6 does add an expression pedal option, which gives you some added flexibility that might be more helpful in performance situations.

PICKUP CAVITIES Same basic thing here. Be careful routing as you don't want to go outside you lines. The pickup rings tend to be thin along the outter edge, so if you go outside you lines it will look like there is a hole in the body of the guitar once you fit the rings on. Determine the depth that you will need for the pickups you are using. This is usually based on the length of the mounting screws. You will need enough room for them to fit. I use a 1/4" bit for this as well. You can use a template if you want but I do it free hand because any imperfections will be covered by the pickup rings.
Here we have another very Beautiful and rare "The Aria Model" Vintage Japanese F style Mandolin with such amazing tone!!! nearing 40 years old these are AMAZING! This is the rare " The Aria" Model M700 as seen on the Classic inlay in the headstocks Gorgeous Brazilian Rosewood veneer is a super beautiful Japanese example of the highly revered F style mandolin made famous by Gibson. These older models were put out during the 1970s this example was 1973. These premium examples have become so popular with Players & Collectors over the past several years now. The inlays on the neck and headstock and the classic violin sunburst on this model are simply gorgeous! The top is solid tight grained old growth Sitka spruce and the back & sides are premium AAA figured & flamed maple, the neck is Mahogany This particular M 700 is in very good condition with some minimal wear from playing please refer to the pics for those details. The original case and pick guard are also still present and do come with this fine instrument the guard is simply off for now. With the resurgence in popularity of Bluegrass and other music styles utilizing the wonderful Mandolin sound in recordings and live performances these rare Gibson Replicas vintage mandolins have been steadily increasing in popularity and in value because players are catching onto the great old high end vintage Japanese instruments now so the demand has risen accordingly. If you're looking for a great Vintage Mandolin that is extremely well made with top craftsmanship utilizing top the grade AAA woods that have now aged and have a wonderful vintage patina to them these are the affordable Japanese vintage F Mandolin alternative choice to a $5000.00 - $10,000 vintage Gibson F-5 ..thats why many Pros today are seeking the best vintage for a great deal. This Old Aria M700 is simply a great one!.
Amp: Gain- increases and decreases how much gain your sound has. Treble- increases and decreases high frequencies in your sound, AKA the brightness of your tone. Mids- increases and decreases the middle frequencies in your sound, AKA the 'punchiness' of your tone, if that makes any sense. Bass- increases and decreases the low frequencies in your sound, AKA how much 'thump' it has.

{ "thumbImageID": "Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst/H79035000002000", "defaultDisplayName": "Epiphone Limited Edition ES-335 PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ebony", "sku": "sku:site51321473136598", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "699.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Ebony-1321473136598.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Ebony/H79035000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51321473136438", "price": "379.99", "regularPrice": "499.00", "msrpPrice": "765.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst-1321473136438.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst/H79035000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51321473136578", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "699.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Natural-1321473136578.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Natural/H79035000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cherry", "sku": "sku:site51321473136388", "price": "379.99", "regularPrice": "499.00", "msrpPrice": "765.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Cherry-1321473136388.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Cherry/H79035000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }