One important thing about caring for a guitar is keeping the wood supple and moist, and quite often, you have to purchase a separate humidifier block with any guitar. Not this guitar, though. The Cordoba C12 comes with its own humidifier block right in the case. You just have to make sure you keep it moist every week. It is now ranked first on the best classical guitar list.
Description: Body: Maple & Poplar & Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple & Poplar & Maple - Neck Attachment: Glued - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Cream - Frets: 22 - Inlay: Pearloid block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ABR-1 - Cutaway: Double - Hardware: 2x Volume Control, 2x Tone Control, Grover Tuners - Pickups: Burstbucker 1/Burstbucker 2 - Pickup Configuration: H-H - String Instrument Finish: Faded Cherry - String Instrument Accessories: Hardshell Case, Certificate of Authenticity - Made In: America
A basic triode valve (tube) contains a cathode, a plate and a grid. When a positive voltage is applied to the plate, a current of negatively charged electrons flows to it from the heated cathode through the grid. This increases the voltage of the audio signal, amplifying its volume. The grid regulates the extent to which plate voltage is increased. A small negative voltage applied to the grid causes a large decrease in plate voltage.[42]
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
Polytone Mega Brute, Jazz guitar amplifier fully functional. Has loads of clean head room but also has 3 settings: Warm, Edge and drive.  I think they’re rated and 65watts, into 8ohm 8” speaker. Super light and portable, approx. 22lbs. Probably from the mid ‘80s production. Hi and low gain inputs, bright switch, effects loop. Spring reverb. Mint condition and everything works like brand new. Shipped to the lower 48 for $50.00. Local pick up would be great. Return if unhappy but ship in same packing and also pay return shipping. Thanks  
Guitar amplifiers and electronic keyboards may have switch pedals for turning built-in reverb and distortion effects on and off; the pedals contain only a switch, with the circuitry for the effect being housed in the amplifier chassis.[106] Some musicians who use rackmounted effects or laptops employ a MIDI controller pedalboard or armband remote controls to trigger sound samples, switch between different effects or control effect settings.[107][108][109] A pedal keyboard uses pedals, but it is not an effect unit; it is a foot-operated keyboard in which the pedals are typically used to play basslines.

For acoustic players, the Rogue Beginner Acoustic Dreadnought guitar with Accessory Pack comes highly rated. Included within this pack is Rogue's exceptionally crafted beginner acoustic dreadnought, along with a Musician's Gear Tubular Guitar Stand and premium Pearloid Celluloid pick, an Ernie Ball polish cloth, and 12 80/10 Bronze acoustic guitar strings. Overall, it's a worthy yet affordable pack for any budding guitarist.
First off, I would like to say I had a lot of fun building this. Also, my hat goes off to the person that hand wrote all the tiny labels on the parts. With that being said, I couldn't get it to work. No sound at all, and only the light came on when I hit the switch. Now the fact that it didn't work could totally be an error on my part, but who knows. Now what I didn't like about this product is this: the casing is pretty small, so everything is pretty cramped (which may also contribute to why I wasn't able to get this to work, although, if you read other reviews, which I recommend for further useful information, some managed just fine), some pieces were mislabeled (There is a review that sorts this out), and the directions aren't very clear...well I thought they were clear enough, but look where that got me, so be ready for that. So 3 stars for fun, good price, and faster than expected delivery.
Choosing the right strings for your instrument and your style of playing might not seem like the biggest deal. After all, the Delta bluesmen of the ’20s, ’30s and ’40s often bought used strings at dry good stores for a few pennies, or boiled old strings to brighten them up. And the proliferation of brands on the market can be overwhelming to the point of leading a player to assume strings are as generic as picks – which aren’t really generic at all, but that’s another story.

The HeadRush Pedalboard's quad-core processor-powered DSP platform enables a faster and more guitarist-friendly user interface, reverb/delay tail spill-over between presets, the ability to load custom/third-party impulse responses, a looper with 20 minutes of record time, and more. The unit's most notable feature, however, is the seven-inch touchscreen, used to edit patches and to create new ones. In form, the Pedalboard most closely resembles Line 6’s Helix in that it has a treadle and 12 footswitches with LED ‘scribble strips’ showing each switch’s function and a colour-coded LED for each. There are several modes available for calling up sounds, easily changed by a couple of footswitch presses. In Stomp mode, the two footswitches to the left scroll through and select Rigs, while the central eight footswitches call up stompboxes within a selected Rig. Then in Rig mode, the left switches scroll through the Rig banks, while the eight select rigs. Sound-wise, there's no 'fizz' here, even on higher-gain patches, and the closer you get to a clean amp sound, the more convincing it is. If amps matter to you more than effects, the HeadRush is well worth looking into.

Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.

It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.
Unten ist die Standard-Lage des Stegs für AF-, AFS- und AG-Gitarren. Stellen Sie die Lage ein, um richtige Intonation zu erhalten. AF, AFS, AK TONABNEHMER (PICKUPS) Der Ausgangspegel des Instruments ebenso wie die Signalqualität kann durch die Tonabnehmer-Höhe beeinflusst werden. Die Höhe sollte so eingestellt werden, bis die Lautstärke von Hals- und Steg-Pickup bei voll aufgedrehtem Lautstärkeregler gleich...

Photo: Pick up an acoustic guitar and what you have in your hands is mostly empty space! Inside, the large wooden body (which is called the sound box) is filled with nothing more than air. As you pluck the strings, the wooden body of the guitar vibrates, the air inside the body vibrates too, and it's the vibrations of the wooden body and the air that amplify the string sound so you can hear it. Acoustic guitars have those big holes in the middle of the case, under the strings, so the amplified sound can get out and travel to your ears. In other words, the hole works the same way as the hole in the end of a trumpet, flute, or any other instrument. Photo by Greg Pierot courtesy of US Navy.
For the electronics, Martin went with a Fishman F1 system. This is a fairly straightforward platform that features a clear, transparent sound with plenty of authentic vibes, and a very simple control layout, which matters when you're in the middle of playing and need to tweak something. There's no EQs or anything extra like that. Instead, you get one volume control, one tone control, and a built-in tuner.
Are you a seasoned player looking to upgrade you instrument or a beginner starting to learn the ropes and tricks of playing a guitar? Well, in this article we have prepared a comprehensive guide on how to select the best electric guitar as per you needs and the list of the best electric guitars available in India. The guitar is a complex musical instrument with some basic components, a wide range of features and different constructions, so it is important to have some basic idea about these features so that you can make an informed choice.
Who created the first distorted electric guitar sound in history? I’ll tell you: the first adventurous player to plug a hollowbody guitar into a tube amplifier way back in the 1930s, that’s who. We might have forgotten his name, or maybe there was no one there to witness the event, but you can bet he lifted up that guitar, checked out his new amp, saw that the loudness control went to 10, and cranked it up to hear just what it could do.
Accompanying the Tempo guitar was the Merson Tempo Guitar-Amp. This was a tube amp with two instrument and one microphone input, heavy-duty 8″ Alnico 5 speaker, volume and tone controls, and a pilot light. The cabinet was covered in two-tone leatherette. The picture is in black-and-white, but the look is remarkably like Premier amps of the time, so a tan and brown color would not be a bad guess. The speaker baffle featured a classical guitar design (!) with “Tempo” written in little circles on the bridge! Substitute a lyre for the classical guitar and you’d swear this was a Premier, made by Manhattan neighbor Multivox, so that might, indeed, be the story there.

{"pageName":"[gc] pdp: in store vintage vintage 196s decca dm124 natural acoustic guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: acoustic guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[gc] shop: guitars: acoustic guitars: 6 string acoustic guitars","prop4":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";113900398;;;;evar65=Vintage-Guitars-In Store Vintage","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
Dont buy too cheap. The cheaper the guitar, the harder to play and the less quality the sound. You want a rewarding feel and sound or you will get discouraged. Buy a better guitar used than a new one cheap. Are you going to learn chords or fingerpicking ? Some guitars are better sounding for one than the other. Some like Taylors are versatile and provide good sound for both. Be smart. Good luck.
Another factor to consider are the alloys used to make the string. Acoustic strings may be phosphor bronze or an 80/20 bronze/zinc alloy, electric strings may be pure steel or a steel/nickel alloy, and the outer winding on the thicker strings may be either round wound or flat wound, which is typically used by jazz guitarists for smooth fingering with less fretting noise. Acoustic and electric strings are both now available with special super-thin coatings to protect them from sweat and corrosion. Coated strings cost more, but generally last much longer. Find out what type of string your favorite player uses, try guitars with different types of strings at your local guitar store, then try a few different sets on your guitar to see what feels and sounds best for your playing style. Major manufacturers include Ernie Ball, Martin, GHS, D'Addario, and Elixir, among others. Make sure you have a string winder to make installing the strings go faster, and some pliers with a fine wire cutter to clip the excess string from the tuning post, a well as some guitar polish - changing strings is a good time to perform some routine maintenance. Keep a clean cloth in your case to wipe down the strings after each use, along with extra bridge pins for your acoustic guitar. Regular string changes are the best way to keep your tone crisp and clear, so grab a pack and tune 'em up!

With $500 in your pocket, buying a good amp becomes a lot easier. In fact, it’s probably as expensive as most casual guitarists would ever need to go. This category includes a big choice of both amp heads and combos, solid-state and tube amps. While they make great practice amps, they are all worthy of small to medium-sized gigs and studio recording. For example, you can find the excellent Peavey ValveKing II. This little amp head offers the same beastly tone as the iconic full-size 6505, with 20 watts of power and solid controls.
DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.
Here we have a real vintage Rare IBANEZ CONCORD beauty from the Golden Era of the Best Japanese Martin D41 style guitars period... This example is Ibanez Model #679 and is the Top of the Line and is an exact Martin copy and is a great " Law Suit " model from the era where Ibanez set out to make the best guitars worldwide period...Fit and finish even after 30 years it is simply superior it appears to be thin old school Nitrocellulose Lacquer finish, this guitar was constructed using the best woods very ornate intricate triple bindings with lots of beautiful inlaid abalone on the Brazilian Rosewood fretboard and the spruce top body WoW...please do have a very good look ...This example has employed the best exotic woods in its construction, The top looks to be solid no seam edge showing at sound hole some pick wear and looks solid, the sides & back also look the same on the inside and outside grain matches so again it looks to be solid?.... A high grade mahogany neck, Sitka spruce top, Choice Indian Rosewood sides & back, and what seems to be a beautiful Rich Chocolate brown Brazilian Jacaranda Rosewood fretboard with gorgeous abalone, frets show some wear lower several yet plays excellently all the way up with very good action and fast & plays easily...Neck width is a nice slim-med super comfortable 1-3/4" at the nut with no buzzing all the way up action is good set at 5/32nds @ 12th fret. This guitar has been well played and well taken care of and is a good professional grade instrument ready to record tonight. Cosmetically this is a 8.5 out of 10, A real vintage player that has not been abused at all yet has been lovingly well played its tone has richly mellowed with the years and only improved with its age and now after 30 years it shows this wonderful patina that can not be replicated that only comes with age, vintage is not for everyone some like it new we understand that this vintage Martin Copy Japanese Guitar however is not new or is it in mint condition yet it is very beautiful in vintage terms of mellowing with age and patina Wow this is for the TRUE VINTAGE LOVER... also you Ibanez Collectors of Japanese vintage. Its Sound is second to none it has nicely articulate lows with nicely contrasting bright highs and the mid-range has a good punch and ring when finger picked, full on sweet big tone when strumming open cords. This one is a real pleasure to play and is EZ on the eyes too. These are really great old classic guitars and are getting very difficult to find now in anywhere near this kind of vintage condition...its all original and the original tuners work very well with no need to change them out they are keeping the guitar tuned cracks or repairs non needed , excellent original neck set and angle, intonation is good. This Rare beauty is conservatively JVG condition rated at very good - excellent in a 30 year old Vintage guitar...amazing looks and tone & playability in a real vintage collectible that your not going to want to put down.. Every bit as good as the much more expensive Martin for a fraction of that. Any questions ask? .
A combo amp contains the amplifier and one or more speakers in a single cabinet. In a "head and speaker cabinet" configuration, the amplifier and speaker each have their own cabinet. The amplifier (head) may drive one or more speaker cabinets. In the 1920s, guitarists played through public address amplifiers, but by the 1940s, this was uncommon. A rare exception in the 1990s was grunge guitarist Kurt Cobain, who used four 800 watt PA amplifiers in his early guitar set-up.

There are two main types of pickups: single coil and humbuckers (also called double coil). Single coil pickups are comprised of a single wire coil and represent the simplest form of pickup technology. Single coils produce a bright, punchy sound, with the drawback that they tend to produce a lot of noise in form of a hum. (One way to combat this is the P90 pickup, which uses a single coil that is wider than the traditional single coil, increasing the amount of area of the strings that the pickup can hear. The result is a bigger, duller sound than the traditional single coil.) The other main type of pickup is the dual coil or humbucker, which is said to “buck the hum” common in single coil pickups. The design is essentially two single coil pickups grouped together, which creates a more powerful, richer tone that is free of extra noise. While it may seem like the humbuckers are the no-brainer option, plenty of players prefer single coils due to their brighter, punchier tone.
The new HT Club 40 looks familiar, but practically every detail has been worked on and sweated over. The control panel has separate channels for clean and overdrive, with two footswitchable voices on each channel. There’s also a new, low-power option, which reduces output from around 40 watts down to just four watts. Global controls include a master volume and level control for the Club’s built-in digital reverb. On the rear panel, you’ll find extension speaker outlets and an effects loop, with new features including a USB recording output together with speaker-emulated line outs on jack and XLR. The MkII’s clean channel has a completely reworked architecture with two tightly defined voices, best described as classic American and classic British, which can be pre-set on the control panel or footswitched. Although only one button is pressed, lots of changes happen inside, including preamp voicing, EQ and valve gain structure, as well as the power amplifier damping.  A similar thing happens on the overdrive channel, with a choice of two voices called ‘classic crunch’ and ‘super- saturated lead’, which can be infinitely tweaked between Brit and USA response using Blackstar’s patented ISF control. Like the clean channel, these voices have been reworked to be richer and more responsive. In use, the HT Club 40 MkII is jaw-droppingly good - while the MkI version was efficient if a little bland sometimes, the MkII is full of character and attitude, with astonishing tonal depth and response that will have many top-dollar boutique amps struggling to keep up.
A now affordable alternative to the Tri-Axis and other Mesa Boogie Amps, the Studio Preamp contained all of the versatility one would expect from a Boogie. This 2-space machine is based on the classic Mesa Boogie Mark IIC+ amplifier, but in the popular rack-mountable form of the late 1980s. It features 5 preamp tubes and a blackface circuit, so it’s perfect for those chasing after a Fender-esque clean or 90’s mid-gain lead tone. And like most Mesa’s, you’ll get a convenient EQ for those final tweaks.
In 2008 Squier released its Classic Vibe series, a series of electric guitars and basses mirroring classic Fender designs of the 1950s and 1960s—each roughly reflecting the hardware, woods, color variations, finishes, body contours, and tonal characteristics of their respective era; Squier states that they didn’t intend the series as completely era correct, but wanted to impart the ‘vibe’ of a classic Fender design—the vintage-quality feel, look, and sound of their first series of guitars in 1982.
When it comes to classic British amp manufacturers, Orange is certainly one of the most legendary. And while many of their amps are pretty inaccessible unless you have many many zeroes in your bank account, they do offer a few superb inexpensive options – one of the best being the Micro Terror half stack you see here. Sold as a set, this tiny titan of an amp has all the brand’s classic style and sound in a package that’s just a fraction of the size. You might think that, with such limited functionality, it’s a bit of a one trick pony – and it is, except it does that one trick better than anyone else. Of course, if you’re looking for a more aggressive hard rock sound, you could always opt for the Micro Dark version for the same price.
I recall reading about one on a thread Gary was a part of. Much ribbing going on. Consensus was that it was pretty much a junker. Now, if you can get it to play and intonate well, I'm a big fan of junkers. I'm intrigued by the ladder bracing too. Very unique sound to that. In/re the bridge, I have an old Carlos that I've been considering doing that to. It's not worth a real neck reset, and the bridge is really high. Not the saddle. The bridge is fat and quite substantial. I could take it down by at least 1mm without it being as thin as a standard Martin bridge.
Being by nature rather sceptical, I have to admit to initially dismissing many of the recording methods in this article as 'studio snake oil', and because there was usually too little time during my own sessions to experiment with new ideas, I'd usually end up with an SM57 glued to the speaker grille by default. Taking the time out to trial the above techniques in the studio showed me quite how much I had been missing — not only much better raw recordings, but also tremendous extra flexibility at mixdown. But don't take it from me — listen to the audio examples for yourself and make up your own mind. If they don't expand your recording horizons, I'll eat my SM57...
The lower strings of a guitar (E, A & D) will often have a nickel winding over their steel core. Nickel also makes an appearance in the frets of most guitars, which are commonly made from nickel-silver. Despite the name, this alloy doesn’t actually contain any silver, but is named for its silver appearance. It’s actually an alloy of copper, nickel, and zinc. These nickel-silver frets aren’t as hard-wearing as steel, so some guitar manufacturers use stainless steel instead to give the frets more longevity.
Anything for which they are wired and/or programmed.  One great example is my first real guitar, a Carvin V220.  It had two humbuckers in a sorta heavy angular gibson explorer body.  Each pickup had volume and tone with a 3 way selector for either or both pickups to be on.  In addition, you could toggle switches to split coils on the humbucker to do a good approximation of a single coil pickup.  Further, you could toggle in/out of phase to get a Peter Green tone or other effects.   Tom anderson guitars have great configurations.  I have gone to lighter strats in recent years and usually replace the pickups with handwounds and customize my 5way switch depending on the guitar.   I love true single coils except that I prefer a humbucker in the bridge. 

Looking to connect with other fans of vintage gear? Join the community. Allow us to introduce you to the exclusive network of musicians and music lovers: Music Aficionado. This social network gives music enthusiasts a place to collect, share, listen to, and discuss everything they love about music from their favorite albums, playlists, and artists to their favorite pieces of gear, instructional videos, and altered tunings.

The Builder’s Edition V-Class K14ce - one of four new 2018 V-Class launches that also include a K24ce, 914ce and PS14c - is quite a statement of intent. It combines the new V bracing with a notably different, more comfortable, Grand Auditorium style. Of course, its build-quality is nothing short of exceptional as we’d expect, and not least at this price. We’re also reminded of the K14ce’s high-end lineage, however, by the paua ‘spring vine’ inlay that lies down the majority of the black/dark brown ebony ’board, while a lighter koa purfling stripe sits just inside the ebony edge-binding and continues around the headstock, which is again ebony-faced with a relatively demure paua inlay. The aged-gold Gotoh tuners perfectly fit the slightly worn-in vibe - hugely understated class, just like the green abalone dots in the ebony bridge-pins. While there’s plenty for those who love details to admire, the modern Taylor guitar is hugely sorted in terms of playing feel. V-Class, Builder’s Edition? Get used to those terms. Taylor has upped the ante. Considerably.
{"id": "361091", "categoryId":"site5LRABAA", "name":"Vintage Leather Guitar Strap", "pageUrl":"/El-Dorado/Vintage-Leather-Guitar-Strap.gc", "thumbnailUrl":"", "hasFeatures":"1", "isAccessory":"1", "message":"", "value":"85.00", "priceMin":"85.00", "priceMax":"85.00", "msrp":"85.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"11", "brand":"El Dorado", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMI,site5LP", "stickerText": "", "isVintage": "0", "outletonly": "0", "checksum":"41079093650", "priceVisibility": "1", "itemType": "New"}
Breedlove Guitars was established in 1990 by luthiers Larry Breedlove and Steve Henderson, while working at Taylor Guitars. After moving to Oregon, Breedlove and Henderson began specializing in custom, fingerstyle six and twelve string guitars. In 1991 the first Breedlove guitar model appeared, after experiments with the JLD bridge truss system and various bracing techniques. Around 1994, Larry’s brother, Kim Breedlove, joined Larry and Steve as a master craftsman. Breedlove strives to be environmentally conscious, and is “dedicated to selecting alternatives to endangered rainforest woods.”[1] Breedlove has since expanded to include mandolins and ukuleles.
Perry has also endorsed an affordable replica version of the Boneyard guitar made by Epiphone that carries the same USA made Burstbucker pickups as the Gibson model. It is a customized Gibson B.B. King “Lucille” guitar; however, instead of the black finish and “Lucille” signature on the headstock, Perry’s guitar features a white finish, a “Billie Perry” signature on headstock and an image of Billie Perry on the front of the guitar.
I can give my own story as why I decided to go direct at shows when the band I am in uses our own PA. In a 5 piece band, with dense guitar, a busy keyboardist/organist, a 5 string bass, 3 vocalists and a cymbal-happy drummer, things were getting loud onstage. Our singer would have the monitors close to feedback all night (and it would feedback several times in the night). Live recordings, both in the room, or miked on TV or radio were a mess of frequencies, since setup times were quick, and we hoped for the best. My amp, a Mesa/Boogie with 6v6s & EL84s sounded amazing. But everyone said they couldn’t hear the vocals. When we listened back, we heard what everyone else (didn’t hear). We were a sonic mess. We tried clearing it up with EQs and amp placement. It sounded clearer onstage, but microphone leakage and feedback were still a problem, and the band had internal ‘volume wars’ with each other. Truth is, we didn’t always have a great soundperson. We were carrying a lot of gear. The venues we played and the sizes of the stages and audiences varied wildly. After several poor sounding gigs that left my ears ringing (even with earplugs), I started investigating. The first decision was to go with IEMs. This would eliminate the bulky monitors (with 1 poorly placed handle, mind you) and stop the feedback problems. It would free up stage space. The next problem was realizing that the amps onstage easily could overpower the IEMs that were directed right in our ears. So I came to the conclusion that the only way past this problem was to get rid of all of the amps. 
Most of Peter, Paul and Mary’s work had splendid fingerstyle guitar work. My favorite is “Don’t Think Twice It’s Alright”. Paul Stookey also had some fine acoustic work going solo with stuff like “Sebastian” and “The Wedding Song”. “The Wedding Song” was supposedly “must learn” stuff for aspiring acoustic players in the 70’s (so they could play at their friends’ weddings).
The fully hollow body electric guitar is almost always a finely crafted work of art.  These instruments are a throw back to the days of hand shaped acoustic instruments of yesteryear.  The hand carved archtops and backs are designed to take advantage of pure acoustic detail, such as resonance and tone, while the electric aspect allows the performer to be amplified.  A pure traditionalist could ask for nothing better tone wise, but must contend with other aspects of these incredibly resonant instruments.
Enlarging/ Drilling Holes: Often required to upgrade tuners, or occasionally to change control pots. Enlarging a hole in wood seems simple enough, and it is. But it's also an easy way to ruin the finish of the guitar and worse. The problem is because there is no wood in the center of the hole, the edges pull upwards instead of cutting. It often results in large ammounts of chipout or worse. The answer is to run the drill BACKWARDS. This will ream the hole out without the risk of chipping. If the hole needs to be made significantly larger, it is often best to use a bit one size up from the desired hole size and run it backwards till the drill has gone just below the surface. Now you can drill the desired size hole normally relatively safely. The washers or dress rings will hide the slightly larger starting bevel that remains. Whenever possible, drill half way through from both sides or clamp a "backer board" in place. Do NOT use much pressure on the drill, let it do the work, excess pressure is usually due to dull bits, and almost always results in some king of damage. If you must drill through the finish where there is no hole use the same method as described for significantly increasing the size of a hole, but apply masking tape over where the hole will be drilled prior to starting.
Guitar players who haven't done much recording tend to comment that the sound coming back over the studio monitors isn't the same as what they hear when standing in front of their amp at a gig. This is hardly surprising, since studios seldom monitor at that kind of level, so the question they should be asking is whether the sound you hear over the monitors is comparable with the guitar sounds heard on similar records.
Since this guitar is from Taylor it benefits from the company's quality consistency, which applies to all their instruments regardless of price points. While aesthetics and materials are more affordable, it gets the same level of attention to detail and quality as the more premium models. This gives budget limited players the chance to have a true Taylor acoustic that plays like a "dream", and not a watered down version that plays and feels different.
While all of the aforementioned stomp boxes (pitch shifter, envelope follower, wah pedal, compressor and overdrive/distortion) should be plugged into the amp’s input, modulation effects can be connected to an amp’s effects loop instead of into its input. Again, this is a matter of taste. Some guitarists prefer the more “pristine” sound quality of modulation effects patched into an effects loop, particularly since this setup can help reduce overall noise.

Like any other electronic products, the amp as well has already gone into notable changes and updates over the years. However even the changes in amp technology happened, many still prefer a tube powered amplifier over a solid state and modeling amps. This is mainly because the sound of a valve is considered the organic or natural on how an amplifier should sound. While the other two is engineered to sound like a tube amp especially the modeling amps.
Along with the options mentioned, be sure to check out overdrive pedals like the Ibanez Tube Screamer or the Boss Super OverDrive SD-1. As for distortion pedals, be on the lookout for the TC Electric Dark Matter Distortion Pedal or the MXR M75 Super Badass Pedal. Whether you're going for a heavy Sabbath-like snarl, the cutting buzzsaw tone of Johnny Ramone or Cobain's feedback-drenched squeals, the distortion and overdrive effects pedal for you is waiting in this catalog.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(817) 277-3510, visibilitySalePrice=539.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, displaySku=113469598, invMsgBackOrdered=false, skuPriceVisibility=1, stickerUrlLink=null, kitCarouselSkuIds=null, stickerURL=null, availableDate=Thu Oct 25 07:49:35 PDT 2018, invMsgAvailability=, serialized=false, listPrice=599.99, isShipsInternational=false, name=Sunburst, storeCity=Arlington, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Arlington, newPrice=539.99, condition=null, priceDropPrice=60.00, status=instock, stickerClass=stickerEmphasis, stickerText=Price Drop, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=539.99, warranty=false, wasPrice=599.99, storeId=441, displayId=113469598, stickerDesc=Price Drop, isOnSale=false} 539.99 USD
While National blithely ignored Beauchamp’s electric experiments, their competition – Dobro – was next to enter the electric arena as early as 1933, with the introduction of the Dobro All-Electric. Basically, the All-Electric was a mahogany-bodied Model 37, most usually outfitted with a 12-fret square neck. It had a large lightning-bolt-engraved coverplate, two screen holes, three little holes under the fingerboard, a slothead, and rosewood ‘board with dot inlays. Instead of the usual resonator, this had a large metal plate where the cone assembly would normally be and a Stimson pickup mounted just in front of the bridge, curiously enough with the poles slanted from the bass side near the bridge toward the middle on the treble side.
One glance at this bad boy reveals just how accurate it is to the 1959 version. We are talking exact same tubeless truss rod assembly, aniline dye, exact same finish... everything. In terms of hardware, they went with a set of Klauson Deluxe tuners and period specific Tune-o-Matic bridge. The custom humbuckers were coiled and voiced to perfectly match the original PAF design from the late '50s which was done using Alnico III magnets and 42 AWG wire. The performance of this guitar is an experience that is rarely found out there.
From the 1860s on, fan bracing became standard in Europe. Martin and other American builders including Washburn and others since forgotten (Schmidt & Maul, Stumcke, Tilton) used X-bracing instead.[3] The sound of X-bracing may be considered less delicate with gut strings, but it prepared the American guitar for steel strings, which emerged in the first quarter of the 20th century.
The aim of Audio Issues is to help interested newcomers get started in the world of audio production with easy to use practical audio production tips for beginners and advanced. If you are just starting out doing some home recording or have been engineering for a while, these quick and easy audio tips are guaranteed to be of interest and use to you.

A direct user interface can give far more musically rewarding results than dozens of parameters, menus and alpha dials. Often, even a panel of knobs isn't anywhere near as natural to play as, say, a Korg Kaoss Pad. Here's something Kaoss Pad 3 owners can try at home: choose effect DL2 (Smooth Delay) in which the pad controls delay time on the X-axis and depth on the Y-axis. Next route your favourite solo patch through it and set the FX depth to about 12 o'clock. Solo wildly whilst simultaneously stroking the top right-hand corner of the Kaoss Pad with short, circular motions. With practice, you should be able to produce delicate pitch sweeps as the delay shifts in time. As you control depth by vertical motion, practise diagonal upwards sweeps followed by vertical downward ones to smoothly dampen the effect. Hey, it takes years to master the violin, so a few evenings spent waggling your finger over flashing LEDs shouldn't be too arduous. Next try the same technique with lush solo pads: simple yet devastatingly effective! Paul Nagle

We used to see and hear Al Di Meola performing his big instrumental hit "Mediterranean Sun Dance" either with unforgatable Paco de Lucia or with his band's members. This time he performed it in duet with Antonio Sánchez, young flamenco guitarist born in Madrid, nephew of Paco de Lucia and Ramón de Algeciras and cousin of J.M. Bandera, who spent four years touring the world...

4) Aside from enough publishing errors that, to my sensibilities, mean that the book is not ready to be published, instructions are shown on how to add a Varistor switch to a guitar, and a Les Paul is used for the example. The drilled hole given as the example is nothing less than a hack job, I hate to say it, but it is. I would faint if I saw a tech do that to my guitar. Besides its being really bad advice in the first place, if you are going to do it, DONT follow this example!
Wouldn't it be great if you could determine what price constitutes a "fair deal" before you made a deal? We think so. That's why we've created iGuide's Real Market Data (RMD) pricing, our proprietary system that does the research for you. It's a guide that gives you updated information on what you should pay for an item or what you should expect to receive - without having to spend hours researching. iGuide's Real Market Data pricing system is the internet's best guide to market value pricing and the only pricing system designed with the consumer in mind. Our exclusive RMD pricing is based on real sales data, gathered from auction sites in near real-time. This ensures you get the most accurate pricing available, as quickly as possible!
This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.
If you’ve read our full reviewof the 50s Stratocaster, you’ll know that this Classic Vibe Stratocaster is an excellent prospect for any beginner who loves the good old days of rock n’ roll! Made by Squier, this 50s-inspired electric has huge vintage appeal, with a modern feel thanks to a trio of Alnico III single-coil pickups and a smooth, modern C-shaped maple neck (with 21 medium jumbo frets).
Slow Gear – A dynamic effect created by BOSS that swells in volume as if you were riding the volume knob on your guitar. The effect is similar to the envelope of a violin with its ability to remove the “attack” or initial transient of the signal and produce gradual volume swells. The compact pedal version of this effect is discontinued but it is found in both the ME-80 and GT-100 multi effects pedals.
After these is the overdrive/distortion, in this case our ST-2 Power Stack. The CS-3 Compression/Sustainer (and the PW-10 V-Wah) can improve the ST-2’s sustain and tone by increasing the signal to it, so they’re placed before the ST-2. Many players use a compressor just for this reason, and the “fixed wah” sound, which is a wah pedal turned on but not continuously swept, is very common in rock and metal lead tones.

First off, what makes the sound in an acoustic guitar? On both an acoustic and acoustic-electric guitar, you have the strings that create vibrations when plucked or strummed. That vibration reverberates across the span of the soundboard (top tonewood surface) and also travels down the strings to the saddle and bridge of the guitar. Those vibrations “move” air within the air cavity called the soundhole. The resonance created in the soundhole depends on its depth/size and the tonewoods used to make the back and sides of the guitar. Voila, you now have sound exiting through the soundhole of the guitar.
“Music is ineffable,” says Scott Waara, product manager at Line 6. His company has built a business around providing the widest range of tones possible to guitar players. But even for a firm dedicated to dissecting tone, it’s not easy to reduce things to a simple recipe. “Everybody hears differently,” Waara says, “and the frequency response of everyone’s brain is different, so some things that are cool to some guys are not going to be cool to other guys. You can put it on a scope and see what’s happening on a frequency graph and you’ll see some tendencies and trends and so on.” The trends seen by the Line 6 staff seem to indicate that warmer, fuller tones are more generally accepted and considered “good.”
[Fausto] It's calculated by the sound coming from the amp. When you stop the note, it stops the magnetic disturbance and in turn the signal created and sent. The instant it is plucked or strummed above and vibrates above the pickup, the magnetic field is disturbed, not before, not after. Harmonic resonance does occur, obviously, but doesn't affect the magnetic field disturbed between the struck metal string and the electromagnet in any meaningful way, nor does it affect the tone.
In the first part of this two-part article, we look at the original five-way switch and find it lacking for some uses. The 2-pole super-switch steps in to help, and we look at how we would go about wiring a Strat in the standard way using that switch. Once we’ve understood that, we go on to create an interesting alternate wiring scheme for a Strat that wouldn’t be possible with the standard 5-way.

The new AC15 'Twin' retains the all-important dual-EL84, cathode-biased output section of its forebear, but otherwise it's very different. A quick scan across the top panel reveals two inputs for independent access to either normal or top boost channels. One benefit of the bigger, 2x12 enclosure is that it provides ample room for a full-length reverb tank, housed in the bottom. There's also an in-built tremolo effect, with controls for depth and speed. But the whole point of this amp is the pair of 25-watt Celestion G12M Greenback speakers. They are the speaker of rock in so many cases and while purists might hope for Celestion Blues, they would add a good £300 at least to the price; and he increased power handling of two Greenbacks on the end of just 15 watts is quite a tantalising prospect. It's fair to say that even with the master volume set-up, the magic doesn't really start happening until the amp's lungs are at least half way open, but happily, that's not far from perfect for many of today's pub and bar gigs - it may even be too much for some. The AC15 'Twin' does sound magnificent when clean, but listen carefully to those amps or this and it's rarely completely undistorted. That harmonically rich drive that was never supposed to be there is the key characteristic that latter day, non-master volume AC users find hardest to replicate.
OK, I’ve put a new set of strings on now. We’re now going to carry out the following steps, just like we did in the general electric guitar setup post. 1. Check and adjust neck bow (how straight the neck is) 2. Check and adjust saddle height 3. Check and adjust the intonation (how far back or forward the saddles need to sit at the bridge to keep your guitar as in tune as possible no matter what fret you’re playing)

Hi Ri - Squier Affinity Stratocasters and Telecasters come in lefty designs. Unfortunately they are a bit more than $100. There are some guitars in that price range but unfortunately I don't have a lot of experience with them. I would tread carefully at that price point, as really cheap guitars often end up being more trouble that they're worth. Good luck, whatever you decide!
BC Rich is a fashionable brand of guitar that has been available since the year 1969. This is an American brand of acoustic & electric guitars & bass guitars. The brand produces 6-string electric guitars mahogany or basswood bodies. This brand is not as popular as other brands of electric guitars as it specializes in guitars for heavy metal & hard rock crowd. It is the choice of only those guitarists who are looking for an instrument that looks sound as edgy as possible. It offers trendy appearance and classic style of playing an electric guitar. The starting price of this brand of guitars is 29,000 INR approximately.
The body is clearly a tweaked vintage shape, meant to evoke — and depart from — a more-typical Strat-type. It’s an exceptionally comfortable guitar and the H-S-S pickup layout allows for wide-ranging tones. They’re definitely on the airy side, as can be expected at this price, but the guitar itself is good enough to withstand future upgrades, if you should desire them.
Jazz guitarists need to learn about a range of different chords, including major 7th, major 6th, minor 7th, minor/major 7th, dominant 7th, diminished, half-diminished, and augmented chords. As well, they need to learn about chord transformations (e.g., altered chords, such as "alt dominant chords" described above), chord substitutions, and re-harmonization techniques. Some jazz guitarists use their knowledge of jazz scales and chords to provide a walking bass-style accompaniment.
Over the years, the Gibson Memphis factory has become synonymous with creating some of the most accurate recreations of timeless classics. From the ES-335, ES-345 and ES-355 to the compact magic of the ES-339, the Gibson Memphis factory has built legendary instruments that pay tribute to the vintage masterpieces of yesteryear. To up the ante, the Gibson Memphis factory is now offering Limited Edition runs, showcasing the creative talents of their phenomenal crew, while boldly moving forward into a bright future. From unique models to exclusive colors, features and options, Gibson Memphis Limited Runs are redefining the concept of what makes a Gibson so unique, taking things a step further. With limited availability and an incredible demand for these unique instruments, Gibson Memphis Limited Runs have become highly collectible, sought after instruments with features us unique as the players who own them. Wildwood Guitars is honored to present our selection of these prized instruments to our exceptional customers. We invite you to find your own unique treasure among our inventory, just don’t blink… you might miss it!
But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.

Because most “top 10 guitar posts” throw a bunch of guitars up there, tell you they’re “the best” and give you little information about them. That’s unhelpful on its best day and dangerously misleading on its worst. Because “best” and “top” are not concrete terms in this sense, unless you’re talking about sales figures, which they almost never are.
This comprehensive set contains the most detailed version of the Yamaha C5 Grand plus a full compliment of performance sounds to cover all your needs from pads, strings, EPs, orchestra, synth, organs, guitars and many other instruments. At 971mb in size (with 592mb dedicated to one outstanding piano with five brightness levels to choose from)  it is designed for the fussy pianist who also wants a full bank of sounds at their fingertips.
Launch price: $4,081 / £3,029 | Body: Caramelized ash/flame maple | Neck: Caramelized flame maple | Scale: 25.5" | Fingerboard: Caramelized flame maple | Frets: 24 | Pickups: 2x Charvel Custom MF humbucker, 1x Custom MF single coil | Controls: Volume, tone, 5-position selector switch, 2-position toggle with multiple switching options | Hardware: Recessed Charvel locking vibrato, Sperzel locking tuners | Left-handed: No | Finish: Natural
He may have spent much of his Guns n' Roses prime shirtless, drunk and surrounded by snakes, but Slash brought good taste and restraint back to hard-rock guitar. "It was a stripped-down rock & roll sound compared to what everybody else was doing," says Slash. He could riff like Joe Perry, and intertwine, Stonesstyle, with Izzy Stradlin. And lyrical solos like the from-the-mountaintop grandeur of "November Rain" were permanently laced into the songs' fabric. "It's hard to play those solos any other way," says Slash. "It will sound wrong."
Russell, George (2001) [1953]. "Chapter 1 The Lydian scale: The seminal source of the principal of tonal gravity". George Russell's Lydian chromatic concept of tonal organization. Volume One: The art and science of tonal gravity (Fourth (Second printing, corrected, 2008) ed.). Brookline, Massachusetts: Concept Publishing Company. pp. 1–9. ISBN 0-9703739-0-2.

Another exotic tonewood is making a name for itself in the guitar industry. It’s similar in appearance and sound performance as Mahogany. It has a distinctive punch for the mid-range tones, but it emphasizes the bright trebles that can be an asset in music when you achieve pitch-perfect intonation. The Martin Road Series DRS1 Guitar sports Sapele beauty perfectly!
Harmony Hollywood H38- OK, here's the one we will sell. She's about the same as above but with opposite color combo. This one has a nice vintage DeArmond Gold Foil Pickup. Action is medium, but if you would like a lower action, we will be happy to cut that bridge a bit down. Guitar is in  nice vintage condition. All original except the period style Rosewood Bridge and reproduction Harmony Pick Guard. SOLD
I started playing harmonica when I was a little boy. I used to get pushed out to entertain adults at two o'clock in the morning. I also had a kind of obsession about the guitar. The first actual toy that I had that I loved was a little wooden guitar that my folks brought me from a shop that sold brooms and buckets and stuff like that. I used to carry that guitar around like my friends would carry a football. I took this thing with me everywhere.

Larrivee is much 'closer to home' and have been operating out of California since 2011. Although you can buy their instruments from Guitar Center and Amazon, and I personally like what I've read about their approach to lutherie, they didn't quite score high enough to make the final cut due to the method I used having a bit of a bias toward wide availability - I may rethink the approach if I revisit this topic.
The strings on your electric guitar have a major impact on its sound and playability. If you’ve taken a look at the huge Musician’s Friend guitar string assortment, you’ve likely realized that there’s a lot to consider in figuring out which strings are right for you and your instrument. Keep reading to find the strings that best match your electric guitar, music, and playing style.
Many community, vocational or technical colleges offer technical and musical programs for those who wish to become guitar technicians. Many are instrument construction and/or repair programs. Guitar tech courses include construction, set-up, structural repair, fretwork, structural design and finishing for acoustic and electric guitars. Any courses involving musical theory and music technology may be helpful in advancing a guitar tech's career.
So, I've done what any self-respecting woman with a rather obsessive personality could do and trawled YouTube for all the best videos of Swift performing stripped down versions of her songs where it's just her singing against a minimal melody. I'm sure you'll agree that as much fun as queen of the squad, awkward dancing hero era Swift is, that these videos are all the proof you need that she doesn't need dance moves or supermodel friends on stage in order to rule.
Most guitars will have at least one TONE knob - a way to adjust the frequency spread of the signal going to the amplification system. Similar to a TONE adjustment on radios, stereos, other things; it usually is a means to adjust how much of the higher frequencies are sent to the output. Rolling the knob “back” will reduce the higher frequencies and can help make the guitar sound less “shrill” if it exhibits that tendency.
The first electric instrument amplifiers were not designed for use with electric guitars. The earliest examples were portable PA systems, which appeared in the early 1930s when the introduction of electrolytic capacitors and rectifier tubes allowed the production of economical built-in power supplies that could be plugged into wall sockets, instead of heavy multiple battery packs, since rechargeable batteries would not become lightweight until many decades later. While guitar amplifiers from the beginning were used to amplify acoustic guitar, electronic amplification of guitar was first widely popularized by the 1930s and 1940s craze for Hawaiian music, which extensively employed the amplified lap steel Hawaiian guitar.[2]
Even though pickups are the main component tasked with interpreting string vibrations and indirectly turning them into sound, your choice of wood still matters. Although the effect is subtle, certain woods will give you better sustain, more definition, and so on.  And in the end it's the accumulation of all of these choices that determine your ultimate sound.
The Gibson Firebird immediately comes to mind. This is a smaller, more rounded Explorer-style guitar first produced back in 1963, and it has undergone a wide range of incarnations since. The modern Gibson Firebird HP has a neck-through design with mahogany body wings, a mahogany/walnut neck with a rosewood fingerboard, 495R/T mini humbuckers, and a reverse headstock.
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.
Basicly it is a HD digital sound interface plus with a MIDI controller and footswitch. It is has unique design with different HOST mode and switching MODE to work with the host softwares. We are proud of that it is now maybe the best thing you can find to use on stage with software FX. The special designed analog signal chain mixing with the digital codec give the best dynamic response and sound quality. We did AB with lots of other interface and be so confident on its performance.

A great app for playing and basic editing of general midi files is Sweet Midi Player which includes a lyric viewer for midis with lyrics/chords. You can load one of the General Midi SoundFonts above to greatly improve the sound quality. For Windows PC use the free program Coolsoft VirtualMIDISynth to install a new GM SoundFont (Get the latest version 2.1.0 for Windows 10).
Guitar Center Albuquerque provides comprehensive guitar repair services for the Albuquerque area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Albuquerque can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.
The instruction covers both electric and acoustic guitars. The music part is thorough but progresses pretty quickly. It covers a few genres so that you can get the specific information you want whether you’re playing the blues or going classical. The best thing about it is that it is an all-in-one reference that even experienced players will appreciate.
Slightly out-of-tune strings on a bass may not jump out as much as on guitar (especially in chords), but when that bass line is sitting under other parts in the mix, even slightly off-pitch notes will make their presence known, and sometimes be harder to track down (why does this song sound a little “off”?). I’d use a tuner (h/w or s/w), but I’d also always verify by ear, before hitting record, and I’d check tuning periodically as the session progresses—just as with drums, hard players can easily put the instrument out after a few energetic takes.
Our congratulations and deepest thanks on making Ibanez your choice of instrument. Ibanez standards are second to none. All Ibanez instruments are set up to our strict quality control standards before shipping. The purpose of this manual is to explain how to maintain your instrument’s finish and to keep your guitar playing as well as it did when it...
In 1967 Lipsky introduced a line proto-copies carrying the Domino brand name. Most were inspired by European models such as the EKO Violin guitar. Among the offerings were two models sporting a California cache, the #502 Californian, an asymmetrical copy of a Vox Phantom, and the #CE82 Californian Rebel (wouldn’t California Rebel have made more sense?) shown here.
WIRING Lay your beautifully finished guitar on a soft towel so you don't scratch it and cover the back with a cloth as wel so you don't splatter solder on it. How you wire you guitar up depends on the layout you have chosen. Mine was a simple one tone, one volume and three way switch set up. I have gone with the Les Paul set up on other guitars which is a two tone and two volume before as well. What ever set up you go with just follow the schematic that either came with you pickups or get one from Seymour Duncan. They also have instructional videos that are done by Seymore Duncan himself on Strats and Les Pauls. I recomend watching these if its your first time wiring a guitar.
Terada was one of the smaller Japanese manufacturers of acoustic guitars during the period of 1960 to 1980, producing products for Epiphone, Fender Japan, Grapham, Gretch and Vesta. Terada produced some Kingston badges until 1975. Other badged guitars produced by Terada include some Burny badges and interesting Thumb guitars. Terada has been in continuous operation since 1912.
It has been said that Barney never played his signature Kays. On the contrary... Barney Kessel has been photographed in concert with the Kay K8700 Jazz Special on multiple occasions, has made appearances at Waldo's Jazz Club on the television classic "Johnny Staccato - Television's Jazz Detective" and has been confirmed by son Dan (who also recorded with the Artist on several famous recordings) to have used the Artist to record countless rock, pop, r&b and blues hits with the most popular performers of the early '60s.
Chushin is still in operation today in Nagano, Japan and does business with guitar giant Fender. I believe that Chushin may have been a member of the Matsumoto Musical Instruments Association listed further down because both companies produced Fresher guitars during different periods....with Matsumoto beginning production and Chushin ending it (perhaps because the Association was disbanded?). During the 1960-1980 period they were responsible for badges Bambu, Cobran, El Maya and Hisonus as well as some Charvel, Fresher and Jackson badges. The company may have possibly made some guitars with the Aztec, Maya and Robin badges, but that is not verified. Guitars made by Chushin from this period are well-made and appreciated by guitar enthusiasts worldwide.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: acoustic guitars","pageName":"[gc] vintage: guitars: acoustic guitars: alvarez","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: acoustic guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"category","prop11":"acoustic guitars","prop5":"[gc] vintage: guitars: acoustic guitars","prop6":"[gc] vintage: guitars: acoustic guitars","prop3":"[gc] vintage: guitars: acoustic guitars","prop4":"[gc] vintage: guitars: acoustic guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}

In 1992, two more models were added, the single-cutaway BC-40 and the 5-string B-540. Although widely admired[who?] for their high quality and lovely appointments, they proved to have limited appeal due to their $2000-plus list prices. By 1997, all four of these initial basses were dropped in favor of the B-1, a lower-priced ABG with laminated mahogany sides as part of Martin’s 1 series of guitars. The BM, an even less expensive model in Martin’s now discontinued Road series soon followed; it had laminated mahogany sides with a solid mahogany back. Also around this time electronics became standard on Martin basses. The most recent additions are the BC-15, a single-cutaway version with a mahogany top, the BC-16GTE, also a single-cutaway with solid Genuine mahogany back and sides with a gloss top, and the 00C-16GTAE, which is a slimmer thin-line version of the previously mentioned model. As a special edition, Martin offered the Alternative X Bass with jet black High Pressure Laminate back and sides and a Graffiti-patterned Aluminum finish top. This bass was very similar in build to the other guitars in Martin’s X series. There have been two Limited Edition Martin acoustic bass models. The first, the SWB Sting Signature Model, was released in 1999 and was made with woods certified by the Rainforest Alliance’s SmartWood program[citation needed]. The SWB’s top is made with book matched solid Sitka spruce reclaimed from pulp logs, the back, sides and neck are solid certified cherry, and the fingerboard is certified katalox. Sting’s signature is inlaid between the 18th and 19th frets, and a label inside the body states that a portion of the sale price is donated to the Rainforest Foundation International[citation needed]. The second and more recent Limited Edition is the B-28KV Klaus Voormann Signature model released in 2008 for the German market. It has a Sitka spruce top with Solid East Indian Rosewood back and sides and a black Ebony fingerboard. The headstock features a unique art design by Klaus as a circular inlay making each bass a one-of-a-kind. In addition to these U.S.-made instruments, Martin also markets Sigma ABGs made in Korea.

Some steel-string acoustic guitars are fitted with pickups purely as an alternative to using a separate microphone. They may also be fitted with a piezoelectric pickup under the bridge, attached to the bridge mounting plate, or with a low-mass microphone (usually a condenser mic) inside the body of the guitar that converts the vibrations in the body into electronic signals. Combinations of these types of pickups may be used, with an integral mixer/preamp/graphic equalizer. Such instruments are called electric acoustic guitars. They are regarded as acoustic guitars rather than electric guitars, because the pickups do not produce a signal directly from the vibration of the strings, but rather from the vibration of the guitar top or body.