At the top of the fingerboard, just below the headstock, is a slotted piece of material called the nut. The strings are routed through the slots in the nut and terminate at the bridge, located on the far end of the body. When the strings are plucked or strummed, they vibrate between the nut and the bridge. This vibration is where the sound of a guitar begins. How that vibration translates into sound depends on whether the guitar is acoustic or electric, as we’ll see in a moment.
Guitar wiring refers to the electrical components, and interconnections thereof, inside an electric guitar (and, by extension, other electric instruments like the bass guitar or mandolin). It most commonly consists of pickups, potentiometers to adjust volume and tone, a switch to select between different pickups (if the instrument has more than one), and the output socket. There may be additional controls for specific functions; the most common of these are described below.

Family Owned and Operated, Lamb's Music has been serving the musical metroplex for over 30 years. Offering warranty on almost every brand of stringed instrument, Lamb's Music has been the go-to spot for repairs and customizations for companies like Guitar Center, Gibson, Gretsch,Taylor Guitars, and Fender Musical Instruments as well as many others.  
Its ok to put diffrent brand pickups in, i have a guitar with an iron gear hammer head at the bridge for heavy riffing and a slash signiture at the neck for sweet blues solos. I had it wired diffrent though, 1 master tone 2 volumes and a blend knob, with the 3 way switch in the middle i was getting too much hammer head due to its out put being higher, so the blend knob allows me to fine tune the mix of the pickups.

If you are familiar with - a special kind of - programming, you can use something like Pure Data or Max MSP. Pure Data (PD), for example, is an open source, visual programming environment for manipulating streams of data like audio (or video). With PD you are able to build your own individual FX chains or use community contributed patches (In PD speech "programs" are called patches). But I think it's not as trivial to use as out of the box products.
Now that we covered the basic features, let’s talk about what really counts: the built-in effects, amp models, and usability. For better or for worse, people tend to compare multi-effects units with the experience and sound you get from owning a pedalboard full of individual pedals. Well, great news: the consensus is that the Zoom G3X feels a lot like using individual stompboxes; more so than any other multi-effects unit on the market. Zoom really nailed it when it comes to making an intuitive interface. If you look at the layout, you’ll notice 3 “stompbox-style” sections side by side, each with a little display and on/off footswitch. These are meant to feel like 3 guitar pedals next to each other. They’re technically 3 slots which can each hold an effect or an amp model. The Zoom has 6 slots total (you can scroll left and right to access them), and all 6 can be used at once. You’ve got LOTS of choices to shape your tone: 94 effects and 22 amp and cabinet models. Any type of effect you can dream up, the Zoom G3X has you covered. Tremolo, vibrato, compressors, filters, overdrives are all available, and many of the effects simulate popular pedals like the Tube Screamer, EHX Big Muff, Pro Co RAT, Boss DS-1, and the list goes on and on. Same goes for the amp modeling - you can emulate a Marshall, Fender, Orange, Vox, etc. and pair up different amp models with various cabinet models. You can make your effect chain in whatever order you want, which is great for the beginner who is figuring out pedal order for the first time, and the veteran who wants to experiment with unique pedal combos. From a user review:
Gretsch aggressiveness in the entry level market is at an all time high, churning out a wide selection of affordable alternatives to many of their premium guitar models. Continuing this theme is the Gretsch G5426 Jet Club, which is essentially a more affordable stop-tail piece version of the Electromatic Pro Jet Bigsby above. It features the same chambered body and high quality looks but with a basic humbucker and without a Bigsby.
Side Note: The above is a visual example of how the wrong pedal order screws up your tone. When you compress before using delay, you get a perfectly shaped note ringing out and decaying uniformly over time. If you delay before compressing and even normalize with your make-up gain, you still lose volume and power due to the attack sneaking through first. Then your delayed notes are all also compressed, ruining your fine-tuned echo decay so that all echoes are relatively too loud and don't decay equally over time.
The effect of amplifier coloration can be emulated using a parametric EQ, where you'll probably find you need to add some upper mid-range boost to get the same brightness as from an amp. Note that, if you're using a software amp modelling plug-in, you'll still get the best results if you feed your guitar via a high-impedance DI box — plugging it straight into a soundcard's line input is likely to result in a drop in level and may even affect the sustain and high end of the guitar sound due to the pickups being loaded by the impedance of the input circuitry. This does not apply to active pickup systems which, in effect, function as a combination of pickup and DI box.

If you're in a small, unsigned band, it's very important to choose an amp that's loud enough - as not every venue will mic your amp. Ironically, bigger artists don't need to worry about this, since they are safe in the knowledge they'll always have a good sound and their amps will always be mic'ed. That's why Seasick Steve plays a small Roland Cube amp, but it's not necessarily a great choice if you're in a band who plays live.

Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-line headstock and creme binding, give it a shot of electrifying attitude. Dynamic, unique and unconventional—like today’s guitarists—the Redondo Player refuses to be bound by the past.

Fender California Coast Series acoustic guitars are already being used across multiple musical genres by top alternative, indie, punk and grunge artists/bands, such as: Culture Abuse, The Regrettes and Dear Boy, as well as singer-songwriter Aaron Lee Tasjan and guitarist Angela Petrilli – accompanying each on their musical journey toward exceptional artistry.
@Dax – Sorry to hear that you are having trouble with the pedals in your setup. If the pedals work on their own in front of the amplifier isolated one at a time, this is likely related to a setting or connection with the pedals. Please shoot us an email to with full details on the amp make and model, the inputs and outputs used on both the amp and each of the pedals, and the setting of the switch on the back of the pedals. Also, include whether this happens on every preset or only certain presets with each pedal.
In recent years, convolution reverbs have become both affordable and commonplace. These differ from synthetic reverbs insomuch as they work from impulse responses (or IRs), recorded in real spaces to faithfully recreate the ambience at the microphone's position when the IR was made. Sometimes these are referred to as sampling reverbs but there's no sampling involved as such, even though the process seems akin to sampling the sonic signature of a room, hall or other space.
The 4000 series were the first Rickenbacker bass guitars, production beginning in 1957. The 4000 was followed by the very popular 4001 (in 1961), the 4002 (limited edition bass introduced in 1977), the 4008 (an eight-string model introduced in the mid-1970s), the 4003 (in 1979, replacing the 4001 entirely in 1986 and still in production in 2012), and most recently the 4004 series. There was also the 4005, a hollow-bodied bass guitar (discontinued in 1984); it did not resemble any of the other 4000 series basses, but rather the new style 360-370 guitars. The 4001S (introduced 1964) was basically a 4001 but with no binding and dot fingerboard inlays. It was exported to England as the RM1999. However, Paul McCartney received the very first 4001S (his unit was left-handed, and later modified to include a “zero fret“).
3.  This one is not so much a customer fix as customer negligence.  A crack in the top of an acoustic that is not addressed right away.  Dirt and grime are allowed into the crack and oxidizes the surfaces so that what could have been fixed with a diamond patch on the inside has now become a fix that includes taking away the rotten wood and inserting a splint.  It can be very difficult to match the new wood with the old, and you better make sure the customer knows that his or her guitar will not look brand new.
Specifically, the book includes exercises to focus on sweeping, alternate picking, string skipping, and bending in addition to arpeggios and legato. Keep in mind, this book builds on the skills you’ll learn and practice along the way. Having said that, intermediate players can jump a few chapters and still get a ton of value out of the guitar exercises in this book. In that way, it really can function as a choose-your-own-adventure type way to learn guitar that matches your current skill level.
Jackson is a well-known guitar manufacturing company that was set up in the year 1980. Jackson guitars are considered as among the best guitars on the planet. Their guitars are known for its slender and refined layouts. Jackson guitars are also popular for their typical pointed headstock. The Jackson JS32 Kelly RW is an electric guitar which has won the hearts of many owing to its stylish design and great sound quality. When it comes to the sound quality of the guitars, Jackson is the best guitar brand to have.
As with so very many elements in the great world of guitar, however, once the novelty wore off and we were less awestruck by the new technology—and, in many cases, came to realize that we had little use for 2 seconds, or even 500 milliseconds of delay time—many of us came to miss the warm, pliable sound of the analog pedals. Today, as with all such things, the jury is still out; plenty of great players use each type of pedal, and the music you make with the technology remains more important than the type of technology you choose to use to make music. Used in isolation, at the same delay settings, each would probably sound just a little different to a guitarist with good ears. At the back end of a pedalboard with eight or ten other effects on it and three or four running at a time, the differences are likely to be negligible—but different players have different preferences, depending on what makes them feel good about their tone.
First off, in any discussions about any effect pedals, no one is asking for or cares the slightest about the opinion of people who categorically don’t like pedals. While the Internet is a wonderful medium that expedites the broadcasting of a personal opinion (as I am doing here), I’m always curious about what motivates the person who categorically dislikes something to show up uninvited to express their feelings. Imagine you start a chat thread or post a status update or tweet with something like “Those of you who’ve seen The Avengers – how did you like Mark Ruffalo as Bruce Banner/Hulk?”. Now imagine you get a reply such as “I didn’t see The Avengers because I think movies suck. People should get back to reading books” – excuse me, but what on earth is that person contributing towards the discussion, and who the hell asked them?
The neck contains a metal truss rod that prevents it from bowing and twisting due to string tension and environmental factors. Adjusting the truss rod corrects intonation issues that prevent the instrument from being tuned properly. This truss rod can be adjusted either at the headstock, or just inside the body of the guitar, at the base of the neck.

Anyway, as the Strat-style guitars have three pickups, the selector switch works like this: all the way to the left (relative to the Jimi pic) would limit the guitar’s output to the sound of the neck pickup. One position to the right will blend the neck pickup with the middle pickup. Put the switch in the middle, and you’ll get just the sound of the middle pickup, as you may have guessed. The next position will blend the middle and bridge pickups, and all the way to the right, it’s all bridge pickup.
The Epiphone G-400 features a mahogany body and neck and a rosewood fingerboard. It has Alnico Classic PRO™ pickups with coil-splitting on both pickups via a push/pull control on the pickups’ volume controls which gives you a lot of tonal variety. If you want to nail it like Angus Young, Eric Clapton in his Cream days or Tony Iommi from Black Sabbath, the PRO gives you the sound of a true SG without the vintage price tag.
Our very first impression of the American Special Telecaster was that it’s such a good guitar. There is just something about it that feels remarkable. It’s hard to point to one particular thing, what does it is the combination of design, sound and feeling. We love the alder body and the maple neck that makes your music sound great, and the Texas Special pickups make everything we play on this guitar sound amazing.
You might recognise this in the tone knob above. The only difference is that R11 is a variable resitance from 0 to 250 Kohm, and C4 is a fixed value. Several guitars have several combinations of R11 and and C4 to achieve different cut-off points. When R11 is 100% position, the resistance is maximised, so there is little incentive for eelctrical current to flow to C4. The signal is not affected as much.
Justin actually has two YouTube channels, one for his guitar lessons and one for teaching particular songs. While his channels are excellent, you’re better off to access them from his website at where you’ll find full, comprehensive menus and links to each video along with explanations of the content. You’ll have no problems of watching a full video, only to discover it doesn’t include what you wanted.
The valvetronix XL-series builds on the success of the original valvetronix digital amplifier. A range of tube-powered modelling amplifiers, with hi-gain sounds designed to span the entire range of heavy rock music. The XL-series uses VOX's patented Valve Reactor technology, producing the sound and feel of an all-tube amp. Models: AD15VT-XL 15-watt 1×10" speaker, AD30VT-XL 30-watt 1×12" speaker, AD50VT-XL 50-watt 2×12" speakers, AD100VT-XL 100-watt 2×12" speakers.
Fulltone’s popular Full-Drive pedal has the bonus of a switchable booster channel, while its overdrive channel goes to a fairly high gain and, unusually, uses asymmetrical clipping for a more textured sound that is quite different from the Tube Screamer’s. Asymmetrical clipping is also at the center of Boss’ SD-1 Super Overdrive (as used by Eddie Van Halen), generated by a circuit that uses two silicon diodes in series in one direction, and only one in the other, to clip each side of the waveform differently. Some players credit asymmetrical clipping with more richness, body and character; others say it sounds clanky and harsh, like an amp with mismatched output tubes. Then again, some guitarists—those in the former camp, probably—say they prefer the sound of mismatched output tubes for these same reasons. As ever, what works is up to you.
Every year we bring a new opening act on tour with us, and every year I have the harsh task of going on stage after some of the finest players in the business. This summer’s tour was no exception. With Montgomery Gentry in the support slot of the Toby Keith Biggest and Baddest tour, I had my work cut out for me. Two of the best axe slingers the music scene has to offer—Frank Bowers and Bo “two-timechampion” Garrett—have some of the greatest chops and sounds on the circuit today.

Unlike the unit I am using here, the original units were large, AC powered, and the speed was controlled with an external pedal. Vintage Uni-Vibe pedals are very expensive at this point but fortunately we can find some very high quality reissues. Famous uses of Uni-Vibe are “Machine Gun” by Jimi Hendrix, “Bridge of Sighs” by Robin Trower, and “Breathe” by Pink Floyd.
Add to this the physical attributes and ergonomics of a .strandberg* that work together to relax muscles, joints and tendons when playing. Some players are freaked out by the low weight, others by the lack of headstock and some have a natural playing position that places their thumb right at the edge of the EndurNeck™ and is not comfortable at all.
The MESA Bigblock 750 has a built-in overdrive channel. The Mesa M2000 has a high gain switch which can be engaged with a footswitch. The Marshall MB450 head and combo bass amplifiers have a tube pre-amp on the "Classic" channel which can be overdriven. The Ashdown ABM 500 EVO III 575W Bass amp head has a built-in overdrive effect. Overdrive is also available on many Crate bass amplifiers. The Yamaha BBT500H has three types of built-in drive effects: overdrive, distortion and fuzz. The Ampeg B5R Bass Amplifier has two channels: clean and overdrive, with the ability to combine the two. Verellen, a boutique amp company, produces a bass amplifier with a built in overdrive channel.
I am struggling with the same issues trying to wrap my head around the benifits of constructing my neck through in this fashion . It would appear most of the big dog builders subscribe to this theory though I don't really know why. I read in a post in this forum that it started with a mistake by luthier Carl Thompson when he cut the channel too deep for the neck and was later copied by Ken Smith ,and then Fodera. 

The Venue DI is essentially an amplifier without a speaker cab. If you go straight into a mixer or PA system this unit lets you customize your acoustic's tone in every way imaginable. While it's particularly ideal for someone who doesn't have an existing preamp in their acoustic rig, it outperforms most preamps that come standard in an acoustic guitar or even in an acoustic amp.
The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
Acoustic guitars that have been fitted with a pickup can be recorded using the same techniques as standard electric guitars when plugged into an amp. Interesting sounds can be created by mic’ing up an acoustic guitar and sending the sound through an amp. This can be done live – although you should be aware of feedback – or a previously recorded acoustic track can be re-amped and used exclusively, or mixed with the original acoustic track. You can get some really gnarly and original ‘electric’ sounds with creative use of overdriven acoustic guitar; it’s especially good for slide playing.
Hi Ri - Squier Affinity Stratocasters and Telecasters come in lefty designs. Unfortunately they are a bit more than $100. There are some guitars in that price range but unfortunately I don't have a lot of experience with them. I would tread carefully at that price point, as really cheap guitars often end up being more trouble that they're worth. Good luck, whatever you decide!
A musician is only as good as the songs he or she plays - except when you're improvising, of course! And even for those of us who write mostly our own music, there's always room for a repertoire of the classics. Building up your musical library starts with the tablature available in this section, and where it ends is up to you. If you're like most musicians, you'll probably spend your whole life collecting and trying your hand at new music. And with material here for guitar, bass, ukulele, banjo, mandolin and even violin, there's something for virtually everyone. Cover the songs in your own personal style or try your hand at recreating them as they were first recorded; it's up to you.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Sunburst, Amber
If you really want your guitar strings to stand out as well as your playing does, then these colourful options from DR are a novel eye-catcher. For even more fun, stick them under a UV light and they’ll glow, too! They might also serve a practical purpose for beginners, too, as new guitarists can quickly identify specific strings based on their colour.

When you are also tracking a close mic at the same time, you might try variations of the approaches discussed in the sections above on distant-miking or ambient-miking to get a little or a lot more room sound into the brew. This often will capture the best overall sound for a range of musical styles – the close mic delivers punch and plenty of midrange grind (depending on mic choice), while the distant mic – placed from about 12″ away to several feet – adds depth, dimension, and the natural reverberation of the space. After careful consideration for both mic placements (using the “position, listen, re-position” techniques discussed above to find ideal on-the-track sound from each mic), some skill in the mixing process is also often required to make the most of any multi-mic setup. The discussion about phase alignment in the sidebar (“Correcting Phase Issues”) is often a big part of this post-tracking approach to maximizing multi-mic techniques, but also be aware that you can use whatever proportional blend of the two tracks works best, a variety of effects and dynamic treatments on each track, and whatever panning of the pair best suits your overall mix, from dead-on together to any different pan of each within the stereo field.
Hendrix was known for a lot of things.The beautiful chord embellishments on Little Wing, the grit of the solo in Voodoo Child screaming off of his strat pickups, his cover of the Dylan song All Along The Watchtower, and the backwards solo in Castles Made of Sand, but known as a great innovative guitar player over and over again. His short but explosive career influenced numerous artists for many years past his death and continues to influence musicians today. To make such a difference in such a short amount of time truly earns Jimi a spot as number two. But…then you may ask, “Who is deserving of number one?!”
The Gallien-Krueger 800RB was a solid state bass amplifier head introduced in 1983 that was liked by bassists for its loud, clean sound and durable construction. It introduced the concept of bi-amplification, as it sent 300 watts of low register sound to the bass speakers and 100 watts to the tweeter.[6] The GK used a tube preamp simulator circuit called "boost". GK 800RB users include Red Hot Chili Peppers bassist Flea and Guns and Roses' Duff McKagan.[6]
{"pageName":"[gc] pdp: epiphone slash firebird limitededition electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"36-month,24-month,60 month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";L20582;;;;evar65=New-Guitars-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}

Wes Borland (b. 1975) guitarist for Limp Bizkit has owned many Ibanez guitars, including a custom 4-string baritone guitar, although he no longer endorses them. He was mainly noted for playing an Ibanez RG7 CST which had selectable piezo and magnetic pickups, only 18 of these were made in 1999. Borland has a signature Yamaha guitar, but has been seen playing a Jackson with the reformed Limp Bizkit.
The Fender Telecaster was developed by Leo Fender in Fullerton, California in 1950. In the period roughly between 1932 and 1949, several craftsmen and companies experimented with solid-body electric guitars, but none had made a significant impact on the market. Leo Fender’s Telecaster was the design that finally put the solid-body guitar on the map.
We considered more than 40 guitars for this guide, and we tested the 13 most promising models. A couple of models aside, our testing panel thought, as Lynn Shipley Sokolow put it, “These are all of good quality and are all adequate.” In fact, certain models we didn’t pick may be a better choice for beginning guitarists who are into a specific style—most notably metal, which is clearly the primary market for brands such as Ibanez and Jackson.
This guitar has an interesting makeup of tone wood. First, the body is Mahogany just like the Iron Label model. The top of the guitar is Poplar Burl, where a burl is actually a type of growth on a tree in which the grain has become somewhat deformed. It sounds bizarre but, Burl is highly prized for its rarity and beauty and is often sought after by wood sculptors and luthiers alike.
Because IRs can be recorded in virtually any space, convolution reverbs generally come with a library of IRs ranging from small live rooms to famous venues, top studio rooms, forests, canyons, railway stations and just about anything else you can think of. They sound very convincing, and there's plenty of variety to be had, but once the IR is loaded, there's only a limited amount of editing you can do without spoiling the natural sound. Usually you can apply EQ and also change the envelope of the reverb decay to make it shorter, and adding pre-delay is not a problem, but after that you pretty much have to take what you get. Some companies, such as Waves, have managed to create additional controls but, as a rule, the further you move from the original IR, the less natural the end result.
On entering a studio, some guitarists ask if they should leave off the effects they normally use and add them in later. Of course, this can be done; however, if the effects are integral to the desired sound and you are ‘playing’ the effect as much as you are the instrument – fuzzboxes, heavy spring reverb, long delays and so on – it might be difficult to create the right feel during the take without them. If there is uncertainty as to whether the effects are spot-on, split the signal to retain the option of reworking the sound during the mixing process.
Just In: another great from Japan at Yamaha Nippon Gakki and wow this model was a good surprise by the big sound it projects I know why Martin made this shape guitar now they weigh nothing and put out a big sound I hardly believed it when I first heard one of these well that was years ago and I have had quite a few of these but non sounded any better than this baby. its in very good - excellent vintage condition no structural issues or cracks or even finish checking its neck alignment is excellent and its top is flat and bridge is tight its action is within Martin specs medium low and it plays excellently all throughout the fingerboard no weird buzzes its fun to play and sound is recording worthy, well taken care of over 40 years old and well maintained has resulted in a better than average survivor. Big sound and a pleasure to play with Martin like tone for a fraction. Questions or to buy contact Joe at: .
{"eVar4":"outlet: guitars","eVar5":"outlet: guitars: electric guitars","pageName":"[gc] outlet: guitars: electric guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"outlet","prop2":"[gc] outlet: guitars: electric guitars","prop1":"[gc] outlet: guitars","evar51":"default: united states","prop10":"category","prop11":"extended range electric guitars","prop5":"[gc] outlet: guitars: electric guitars","prop6":"[gc] outlet: guitars: electric guitars","prop3":"[gc] outlet: guitars: electric guitars","prop4":"[gc] outlet: guitars: electric guitars","channel":"[gc] outlet","linkInternalFilters":"javascript:,","prop7":"[gc] outlet"}
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Custom - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Diecast, Gold, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
If you think not using any pedals makes you more “real” or “natural” of a player, you’ve got to be kidding me. Let’s think about what is physically happening when we play electric guitar. The sound is created when a guitar string is plucked by a pick, likely made from some polymer (oh wait, the “real” guys use their thumb, okay) causing it to vibrate. This vibration also creates a corresponding vibration through a magnetic field above your pickups. The pickup converts this into electric current, which passes through a simple low-pass filter tone circuit and a passive volume attenuator (we presume you’re not using an active pickup, being that you’re keeping it “real”) that does some equalization before it even gets to the cable. The standard cable consists of stranded, >99% oxygen free copper wire usually measuring between 18-24 gauge thickness, creating another filter in conjunction with the guitar circuitry based on cable capacitance.
They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton
It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join[citation needed]. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.
One last time we must put aside our expensive tastes and put up with the “economy” version of a guitar that is actually much nicer. The full-scale rendition of Steve Vai’s guitar is, in my opinion, legitimately worth every one of the nearly 300,000 pennies it costs. Per the Ibanez web site, there are a lot of Vai Signature models you can pick from:
This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.
For some performances - those well controlled performances of an orchestral guitarist, let's say - machine notation can get a lot closer to producing a true sound than it will to the variations offered by a virtuoso jazz guitarist, blues master or metal thrasher jamming outside the box. In some cases, the machine sound might already fool some of the most discerning listeners -- if the performance does not test the limits of the mechanical emulation.
Two and one half steps down from Drop D. This tuning is most often used by death metal or deathcore musicians, such as Suicide Silence or Whitechapel (both use seven-string guitars and tune down the seventh string a full step). Utilized by bands like Nile, Motograter, Thrice, Filter (on the songs "Columind" and "The Missing" from The Amalgamut and "Drug Boy" and "The Trouble with Angels" from the album of the same name), Dead by April, RED, Ill Niño (on Dead New World) and occasionally Slipknot, Crowbar, Amon Amarth, Five Finger Death Punch, and Parkway Drive. Trapt uses this tuning on their songs "Hollow Man" and "Waiting".
In late 1929, Martin built a prototype batch of six OM guitars. The very first of these had pyramid bridges and no pickguard. Martin soon realized that with the vigorous strumming required in a band setting, a pickguard would be required. Hence all OMs after the prototype batch had a small teardrop-shaped pickguard. The new OMs were not highly sucessful. They sold, but not as well as Martin had hoped. In 1933 the OM designation was dropped and was now called the "000" model. But infact the 1933 "000" models were the same as the 1933 "OM" models, retaining the OM body style and 14 fret neck. Then in 1934 the standard 000 models were modified to the shorter 24.9" scale (for unknown reasons, as the 12 fret 000 body had a 25.6" scale length its inception in 1902 to its demise in 1931). Yet the OM's longer scale was a major factor in the OM's tone. The strings on an OM must be tuned to a higher tension to get concert pitch. This extra tension translates into more drive on the top, hence providing more volume and tone. The OM's scalloped braces and a small maple bridgeplate give the OM a great sound. Although these features were common to other Martin models of the time, the OM's top brace under the fingerboard was missing. This design is unique to OMs making the top very lightly braced. This does lead to some problems with cracks in the upper bout along the side of the fingerboard, but it also contributes to the great sound of the OM models.
Aside from possible engineering advantages, some feel that in relation to the rising cost of rare tonewoods, man-made materials may be economically preferable and more ecologically sensitive. However, wood remains popular in production instruments, though sometimes in conjunction with new materials. Vigier guitars, for example, use a wooden neck reinforced by embedding a light, carbon fiber rod in place of the usual heavier steel bar or adjustable steel truss rod. After-market necks made entirely from carbon fiber fit existing bolt-on instruments. Few, if any, extensive formal investigations have been widely published that confirm or refute claims over the effects of different woods or materials on electric guitar sound.
Before taking the plunge, make sure that you have the necessary tools to build the guitar of your dreams. Most kits will require you to have screwdrivers, pliers and soldering iron for the assembly process. While others require more, like wood glue, bandsaw and other wood routing tools. Once you've decided on the finish, you'll also have to get finishing tools like sandpaper, wood sealant, primer, paint and more. It is also recommended to have a dedicated room or space for you to work on, a nice working table would also make work a bit more easier.
Flanger: A flanger creates a "whooshing" "jet plane" or "spaceship" sound, simulating a studio effect that was first produced by recording a track on two synchronized tapes and periodically slowing one tape by pressing the edge of its reel (the "flange"). When the two tapes' audio signals are later mixed, a comb filter effect can be heard. Flanger units add a variably delayed version of the audio signal to the original or signal, creating a comb filter or Doppler effect.[73][74] Some famous uses of flanger effects include "Walking on the Moon" by The Police, the intro to "Ain't Talkin' 'Bout Love" by Van Halen, and "Barracuda" by Heart.[75][76]
{ "thumbImageID": "LC100-Classical-Guitar-Natural/518978000010000", "defaultDisplayName": "Lucero LC100 Classical Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115036014", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Natural-1274115036014.gc", "skuImageId": "LC100-Classical-Guitar-Natural/518978000010000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115036008", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Black-1274115036008.gc", "skuImageId": "LC100-Classical-Guitar-Black/518978000001000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Guitar brands such as Antoria shared some Ibanez guitar designs. The Antoria guitar brand was managed by JT Coppock Leeds Ltd England. CSL was a brand name managed by Charles Summerfield Ltd England. Maurice Summerfield of the Charles Summerfield Ltd company contributed some design ideas to Hoshino Gakki and also imported Ibanez and CSL guitars into the UK with Hoshino Gakki cooperation from 1964-1987.[3] The Maxxas brand name came about because Hoshino Gakki thought that the guitar did not fit in with the Ibanez model range and was therefore named Maxxas by Rich Lasner from Hoshino USA [4].

And finally, it is always a good idea to have your amp set on with clean settings in order to get a clear image of the sound of your effects chain. Hitting the distortion on the amp, for example, will distort EVERYTHING in your chain, so it’s best to leave the distorting to your pedal where it can be better contained. But in the end, experiment! While these are merely a few suggestions of the general way a signal chain works, you are only limited by your creative implementation.

You can think of this article as a directory of sorts. There’s a lot of information presented here, but then again there are a lot of guitars out there in the world. I started this project a few years ago with the idea of creating a page where new and veteran players alike can find information about different guitar brands. I’ve got over thirty years of experience behind me, so maybe my opinions can help you make a better decision if you are looking for a new instrument.
Whether your style is searing rock or acoustic folk, the right guitar will help you sound and feel like a superstar. From acoustic guitars to electric hybrids to bass guitars, there’s a guitar designed exactly for the way you play. You’ll be rocking out in no time when you choose a guitar from Best Buy’s selection of top brands like Fender, Yamaha, Squier, Schecter, Mahalo, Dean Guitars and more.

"Our expertise is to customize guitars according to the specifications of our clients. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. Our 100% satisfaction guarantee allows you to buy with confidence!"
The DigiTech Whammy is a great example of a powerful pitch shifter. Controlled by an expression pedal in a manner similar to a wah, it gives you the ability to immediately alter the pitch of the notes you are playing. Pantera and Damageplan guitarist Darrell Abbott used and abused such a pedal to get some amazing sounds in his hardcore style of play.
This may seem like an odd value to consider, but most guitarists need to feel a certain connection to their instrument. It’s part of what makes being a guitarist different from other types of musicians; a sense of individuality as well as style. Your guitar will be a significant investment regardless of which brand you settle on, and while sound and construction are more critical factors overall, it’s important that your instrument inspires you. Different brands are known for cultivating different images; Gibson’s and Fender’s were made famous by the rock gods of yesterday, while Taylor’s unique acoustic bodies will conjure up a different vibe for a folk player. Again, this aspect speaks to your individual needs as a guitarist.
It’s big, it’s brawny and it’s bold—the Reverend Jetstream HB represents a ton of value for its price tag. Although it excels in rafter-shaking rock ’n’ roll tones, this offset guitar has a few nifty tricks that make it more versatile. Add to that quality construction and components, and you’re left with one of the best electric guitars under $1,000.

Many modern guitar amps also are equipped with multi-effects sections that encourage experimentation. There are also dozens of multi-effects pedals out there that are very affordably priced and offer a complete suite of effects. Most of these amp and effects processors feature presets created by engineers and pro guitarists to sound good at the touch of a button. Many allow you to create your own unique sounds then store them for instant recall. If you're a typical player, you'll adopt and abandon dozens of different effects boxes and presets over your playing career as your style and musical tastes evolve and change.
{ "thumbImageID": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Traditional PRO-II Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ocean Blue Burst", "sku": "sku:site51500000014857", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst-1500000014857.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Red", "sku": "sku:site51500000014856", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red-1500000014856.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red/J40313000004000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000014853", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst-1500000014853.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst/J40313000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Desert Burst", "sku": "sku:site51500000014855", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst-1500000014855.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst/J40313000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000014854", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony-1500000014854.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony/J40313000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }