In pop and rock music, the electric guitar is often used in two roles: as a rhythm guitar, which plays the chord sequences or progressions, and riffs, and sets the beat (as part of a rhythm section); and as a lead guitar, which provides instrumental melody lines, melodic instrumental fill passages, and solos. In a small group, such as a power trio, one guitarist switches between both roles. In large rock and metal bands, there is often a rhythm guitarist and a lead guitarist.

There were actually two bolt-neck DT-250s, both with basswood bodies and the very nice locking Powerocker vibratos. The regular model came in black or white and had a rosewood fingerboard. Well, a little boring. But the Transparent Red TRs came with a maple fingerboard stained red. Yes, that’s what we’re talking about! If you’re going to have a red guitar, you ought to have a matching red fingerboard. Hard maple, made slick with the red polyurethane.
The Whammy pedal is truly one-of-a-kind. It gets its name from the slang term for a tremolo arm on a guitar, which allows a player to control the pitch of the strings while playing. In much the same way, The Whammy pedal allows a player to perform radical pitch-shifting in real time by rocking the foot treadle back and forth, sweeping between the intervals set on the pedal. This pedal is a lot of fun and allows guitarists to create the dive-bomb sounds that are associated with JImi Hendrix, Eddie Van Halen, and Joe Satriani.
I use the boss me-8 for 15 years, now with the boss me-25 i have the same kick ass sound plus some more effects and customisations, also it comes with a beutifull surprise that i don't even expect, this guiar pedal is also an audio interfase that suport digital audio via USB, is really amazing you will not regret, it doesn't come whit a power supply only batteries, buy one separatly.
Another factor that may need to be considered is the length of the speaker cable. Very long speaker cable runs may affect the performance of the system, either by causing line loss of power or by affecting the impedance. For best performance and highest wattage output with bass stacks or combos with extension speakers, bassists typically use the shortest possible speaker cable.

Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
There have been plenty of attempts at different types of semi-hollow guitars from nearly every guitar manufacturer, and some are more successful than others. In my experience, even though Gibson does offer a fairly consistent output, there is still a fair amount of discrepancy from one instrument to the next, and as always I recommend playing a guitar before passing any judgement on it. But try and be discerning in your assessment of the guitar — versatility is king, only capable of being knocked off the throne by an absolutely golden, irreplaceable tone. Trust your ears!
You can reach me by phone all day(8am until 5pm) on Monday through Saturday  If I don't answer I probably have machinery running or have both hands busy but leave a message and I will call you back shortly. During off hours please leave a message and I will call you that evening or the next morning. Feel free to email me with any general questions you may have.
@Dax – Sorry to hear that you are having trouble with the pedals in your setup. If the pedals work on their own in front of the amplifier isolated one at a time, this is likely related to a setting or connection with the pedals. Please shoot us an email to with full details on the amp make and model, the inputs and outputs used on both the amp and each of the pedals, and the setting of the switch on the back of the pedals. Also, include whether this happens on every preset or only certain presets with each pedal.
The guitar is very light in weight and pretty resonant. At this point they were hard-wiring the cord right into the guitar with a nifty spring strain relief on the plug. This guitar has a brighter sound than my Gretsch and I probably prefer it for ultra-clean work because it has that vintage "thang" going on that some call "mojo." I am, however, trying to get the driven sound sorted at this point because of all the overtones. Now I know what sort of sound the Telecaster bridge pickup was based upon!
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Main Spring Stopper Tremolo Block Stop Rod With the guitar tuned correctly, adjust the Main Spring make sure that the Stop Rod makes contact with the Tremolo Block and Stopper. If the Stop Rod does not make contact with the Tremolo Block and Stopper, adjust the Main Spring adjustment screw until contact is made.
{ "thumbImageID": "American-Professional-Precision-Bass-Maple-Fingerboard-Olympic-White/J46176000002000", "defaultDisplayName": "Fender American Professional Precision Bass Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030578", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-Maple-Fingerboard-Black-1500000030578.gc", "skuImageId": "American-Professional-Precision-Bass-Maple-Fingerboard-Black/J46176000003000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030580", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-Maple-Fingerboard-Antique-Olive-1500000030580.gc", "skuImageId": "American-Professional-Precision-Bass-Maple-Fingerboard-Antique-Olive/J46176000004000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51500000030579", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-Maple-Fingerboard-Olympic-White-1500000030579.gc", "skuImageId": "American-Professional-Precision-Bass-Maple-Fingerboard-Olympic-White/J46176000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000030581", "price": "1,449.99", "regularPrice": "1,449.99", "msrpPrice": "1,450.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-Maple-Fingerboard-3-Color-Sunburst-1500000030581.gc", "skuImageId": "American-Professional-Precision-Bass-Maple-Fingerboard-3-Color-Sunburst/J46176000001000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Harmonizers blend the note from your original guitar signal with a note shifted to a preset interval. For example, you may set it to a Major 3rd interval and it will create a similar sound as if you played a root-plus-Maj-3rd diad. Harmonizers are pretty diverse effects, but using one correctly obviously means understanding a little about music theory and how scales and intervals work.
About a year ago (or maybe more) I was in a real Marc Bolan/T Rex phase, and I came across a Lotus Les Paul copy in my local Sam Ash used for $199. Like the idiot I am, I played it, and it played and sounded good, so I bought it. Well, that did not sit well with my folks, who made me take it back a few days later. It had a bolt-on neck and was quite heavy, but other than that, it looked sweet. I even was smart enough to take a picture of it:
Same woods sounding different? OF COURSE!!! Look, I’ve been a carpenter for over 30 years and can absolutely inform you that there is a marked variation of characteristics of wood in the same species…density, tap tone, characteristics of how the individual piece reacts to being worked with tools…heck for all anybody knows internal stresses (for example as indicated by how a 12″ wide piece of wood reacts to being ripped down the center…many times both pieces end up being bowed and such) might play a big factor in how said piece of wood sounds musically…shrugs shoulders…
The output jack is where you plug in your guitar lead. These are generally 1/4″ and transfer the signal created by your pickups to your guitar amp. They are usually connected from a ground wire and input wire. When the lead is plugged into the output jack the signal can be transferred. These can often be a source of trouble and need to be kept tight to reduce noise.
Giannini guitars were (and are) made by the Tranquilo Giannini S.A. factory, Carlos Weber 124, Sao Paolo, Brazil. They are generally known for being well-made instruments featuring very fancy Brazilian hardwood veneers, as well as for the strange-shaped asymmetrical CraViola models. Probably the most famous, indeed, perhaps only famous, endorser of Giannini guitars was José Feliciano. No reference materials were available on the early Giannini guitars. A catalog from 1971 is available, with a snapshot of the line that probably goes back at least a decade, and certainly forward.

Like most affordable super strat guitars, the Omen-6 has a basswood body, carved into the elegant looking shape that Schecter is known for. The neck is crafted from mahogany and joins the body via a bolt-on joint. It is topped by a 14" radius rosewood fingerboard that has 24 jumbo frets. It comes setup for fast and comfortable playability, with its 25.5" scale length, 1.65" nut width and stylized fretboard markers. Giving this guitar its voice are two Schecter Diamond Plus pickups, which are passive pickups but are still hot enough for driving high-gain pedals and amps.

Here we have is one of the finest vintage Banjo's you will ever see. This example is a 32 year old High End no expense was spared. Its super well built with top grade materials like Brazilian Rosewood fingerboard and Mother of pearl inlay work just about everywhere WoW!... just have a good look at its AAA flamed Maple back and its AAA flamed Maple Neck.. this one is super nice and well its clean. The action is great and she has a very good feel & sound. More to come soon...stay posted for updates Thanks for looking. .
As I tried to point out, what is high action is based on personal taste for the most part. Also, Martins traditionally have higher action than many other manufacturers. But unless it is a true defect in the particular guitar, from wood swelling or shrinking, etc. action is easily adjustable, but it is recommended that you have a certified Martin warranty repair person do that, unless you are comfortable with such adjustments.
Gibson has produced three Jimmy Page signature models. The first was issued in the mid-1990s. It was based on a stock Les Paul Standard of the time (rather than the more prestigious and historically correct 1958/1959 re-issues issued by the Gibson Custom Shop). The modifications were based on Jimmy Page‘s “#2” 1959 Les Paul, which had been modified with push-pull potentiometers on all four control knobs, as well as mini push-pull switches under the pickguard. This first version of the Jimmy Page Signature did not have the mini-switches under the pickguard, nor did it replicate the custom-shaved neck profile of Jimmy Page’s guitar, but it did include the four push-pull pots. With all four pots pushed down, the guitar operated as normal. Pulling up the volume pot for the Bridge or Neck pickup turned the respective pickup into a single coil, rather than humbucking pickup. Pulling up the tone pot for the Neck pickup changed Bridge & Neck pickups wiring from series (stock) to parallel. Pulling up the tone pot for the Bridge pickup put Bridge & Neck pickups out of phase with each other. The first iteration of the Jimmy Page Signature utilized Gibson’s then-current high-output humbuckers: a 496R in the neck position and a 498T at the bridge.
This is a tricky one, because I’d hate to see anyone miss out on a bargain. Unless you really know what you’re doing, buying a used guitar is a risky venture. Definitely, you shouldn’t buy a second-hand guitar without seeing or trying it out. Again, sticking with well-known brands is wise. Look carefully for worn fret boards (pitted holes under frequently-played notes) and grooves in the frets themselves. Check along the neck to see if it’s not too bent— it’s supposed to be slightly curved. Getting problems like these fixed professionally can be expensive and you might as well buy something new in the first place. The bottom line here is that high-quality instruments that have been properly maintained don’t lose any value. A good second-hand guitar should cost you as much as a good new one — but yes, those bargains are out there, too. is a curated collection of electric guitars chosen for their unique tone, design, and significance in electric guitar history from approximately 1950-1980. This collection approaches electric guitars from the underdog perspective. So we carry guitars built for the masses, luthiers & manufacturers who pushed the boundaries as to what was possible in terms of not only instrument quality but tone. Design also plays an important consideration in this collection. Alternative materials, innovative tuning systems, and high quality-low cost manufacturing processes are only some of the unique qualities found on instruments at
Students and expert alike describe this guitar as a fun instrument, and goes further by commenting that it has exceeded their expectations. From its fast action playability to the quality of the finish, the Epiphone SGSpecial continues to rake in compliments. Several people even said that it comes surprisingly close to the feel and sound of a Gibson SG.
The easiest way to record bass is to just plug it straight into the console/interface—of course, using the correct instrument-level input or dedicated DI box, and not a standard line input. This will provide a nice, clean, deep tone, but it will likely lack the growl and grit that’s often desired—for that, you’ll want the sound of an amp. While you can always use a bass amp sim plug-in later, in the mix (see below), there’s nothing like the pants-flapping wall of low-end sound coming out of a real bass amp, if one is available. But most engineers will record both—a DI’d signal, and a miked-up amp. They can be combined later on, for the best of both worlds—the clean, round, depth from the DI, with the edge and midrange punch of the amp (but see below, for a caveat).
To combat this, many jazz players began to favour semi-acoustic guitars. These often came with feedback reducing wooden blocks installed inside the body, which addded extra weight to the instrument. But, with the welcome side effect of increasing the amount of sustain produced. Gibson and Ibanez cornered the mass-production market, offering a range of hollow bodied guitars which were well received by jazz players as well as players of genres like blues and rock n’ roll. As time went on, many players even gravitated towards solid body guitars, on account of the unique and arguably more versatile palette of sounds on offer.
Washburn is known for producing great value guitars, and they take their reputation seriously. While other guitar builders tend to compromise cosmetics, this company does not hold back on visual details even in the entry-level market. The WD7S shows the company's design philosophy in action, featuring elegant body binding and custom wood inlaid rosette that makes the guitar look far more expensive than its actual price.

Went here for the first time yesterday to get the strings replaced on my acoustic guitar. Kevin, the owner, completely encompasses the definition of true customer service. He not only was professional, courteous and friendly but also willing to talk me through the process as he was re-stringing my guitar when I asked if I could watch and learn. I highly encourage coming here, especially for a an excellent and personal experience! I will be back no doubt!

This is a good list although after owning most of these brands or at least having played all of them, I would re-rearrange the order. Gibsons although a good guitar are simply no longer the quality of Taylor or Martin. They are lagging behind these guys. Yamaha and Epiphone despite online "reviews" are also not near a Taylor or Martin for that matter. So I would drop Gibson, Yamaha, and Epiphone down the list, and although Seagull makes a decent guitar, they are no better than Blueridge, so I would drop them down and bring Blueridge up. Of course this is all subjective, but here is my list re-ordered for what its worth.
Our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod. You may bring your brand new guitar in your Local Guitar Shop for proper setup and adjustment of the truss rod.
Stratocasters also feature tremolo systems, where the Les Paul, SG and Telecaster have fixed bridges. Epsecially in the budget price range, tuning is typically a little more stable for fixed-bridge guitars. If you really want a Strat with a tremolo it’s nothing to be super concerned about, but newbies should be aware of the difference. A good guitar tech at the local music store should be able to set your Strat up so it stays in tune just fine.

Now I’ve heard people say they can’t tell the difference between the two when they’ve played both. From a strictly tone perspective, that may or may not be true. And maybe for me it’s just the placebo effect (I know its a Gibson - or not - therefore I feel an ethereal change in quality), yet it seems awfully subjective to base a $2600 difference on a report that lacks concrete research.
As jazz-rock fusion emerged in the early 1970s, many players switched to the more rock-oriented solid body guitars. Other jazz guitarists, like Grant Green and Wes Montgomery, turned to applying their skills to pop-oriented styles that fused jazz with soul and R&B, such as soul jazz-styled organ trios. Younger jazz musicians rode the surge of electric popular genres such as blues, rock, and funk to reach new audiences. Guitarists in the fusion realm fused the post-bop harmonic and melodic language of musicians such as John Coltrane, McCoy Tyner, Ornette Coleman, and Miles Davis with a hard-edged (and usually very loud) rock tone created by guitarists such as Cream's Eric Clapton who had redefined the sound of the guitar for those unfamiliar with the black blues players of Chicago and, before that, the Delta region of the Mississippi upon whom his style was based. With John Mayall's Bluesbreakers, Clapton turned up the volume on a sound already pioneered by Buddy Guy, Freddie King, B.B. King and others that was fluid, with heavy finger vibratos, string bending, and speed through powerful Marshall amplifiers.
If you want to access some resources that will help dealing with a specific tonal pursuit, piece of gear or other questions related to your rig, I’d recommend giving Guitar Tricks 14-day free trial a test run - there’s no obligations and you’ve got nothing to lose - except two free weeks of one of the most comprehensive and thorough guitar education websites in existence.

Washburn - With a long history that dates back to 1883, Washburn makes various types of guitar related products including electric, acoustic, bass, amps, banjos, mandolins and amplifiers. Their old acoustic guitars were involved with Delta blues back in the 1920s, while now, they are recognized mostly for their metal/rock friendly electric guitars.
Since real knobs occupy space, this multi-effects processor is quite bulky, a welcome compromise that makes it easier to setup and adjust on the fly. The pedal comes with 59 effects and includes 9 amp models that feature Boss' COSM technology, the standard tech that they now employ on many of their effects and amps. You can combine up to 8 of these to craft your preferred tones, which you can then save into its 36 user presets. Other features include a built-in tuner, a 38-second looper and the ability to record your guitar sound directly to a computer via USB.

The actual value of the pot itself does not affect the input to output voltage ratio, but it does alter the peak frequency of the pickup. If you want a brighter sound from your pickups, use a pot with a larger total resistance. If you want a darker sound, use a smaller total resistance. In general, 250kΩ pots are used with single-coil pickups and 500kΩ pots are used with humbucking pickups.

Packing almost the entire tonal essence of 80's arena rock n' roll into one bar-shaped unit, with a glassy and transparent, BBD-style chorus, a crushing hot rod Marshall-stack crunch distortion, a natural-sounding delay, and a spacious reverb. Turn on every module on the bar, with a little tweaking, you've got yourself THE EPIC lead tone, which is dynamic, responsive to your hands, with long sustain, and cuts through the mix like a knife through butter. A built-in cab simulator for getting a real guitar cabinet sound straight from the PA system; Max delay time: 500ms It is the ultimate tool for road touring gigs. Aluminum-alloy, metal casing, stable and strong; compact size. Grab it! Plug it! Tweak it! Rock it! LED indicator shows the working state; Power: DC 9V 5.5x2.1mm center negative,.
Compressors are often applied to electric guitar tracks to bring out the guitar’s natural sustain, as well as even out the overall dynamic range. Lead guitar parts usually benefit from a degree of compression treatment, while heavily overdriven rhythm parts often require very little or none at all, as the distortion naturally provides its own type of dynamic control. In the case of unnatural sounds, such as electric guitar, compression becomes a highly subjective topic, so experimentation is key to achieving the desired effect. As a starting point, therefore, try medium-fast attack and release times – an extremely fast attack time will blunt the transient response of the note. Remember that electric guitars can be inherently noisy and compression will generally exaggerate any hums and buzzes.
This guitar is a good example of the late 1960s Matsumoku made imports that were flooding the Americas.  This model with these pickups were made for many years, starting around 1966 through the early 70s.  That’s a good run!  Based on my research this particular model probably dates from the late 60s.Most of the time I see these guitars with chrome or tortoiseshell pickguards, and this is the first one I’d seen with a white guard.  Has a cool shape too!  These pickups were exclusive to Matsumoku and generally have a good sound.  I’ve measured about 10 of these pickups, and the reading are often all over the place.  Some of these read out near 9k, and some read out under 5k, so obviously the specs changed over the years.  I think the hotter reading pickups came from the later 60s era.Now that Lyle name was owned by the L.D. Heater Music Company out of Beaverton, Oregon.  They had some cool electric models here and there and seemed to really focus on acoustic guitars back in the day.  Most, but not all of the electric models were made by Matsumoku.Most Matsumoku guitars were made rather well, especially the wood parts.  Bodies and necks were always top notch and their finishes hold up better than the average import guitar.  They did some great, burst finishes!  But one weak point on all these Matsumoku electric guitars were the pickup switches.  They just weren’t made to withstand constant use and almost always fail.  Dano at Happy Guitar Repair knows how to rebuild these switches, and it’s just about the only way to bring them back to life.The all-telling Matsumoku plate is back there and the neck pockets on all their guitars were really solid.  If you’re looking to get into these vintage Japanese guitars, Matsumoku models are always a good place to get your feet wet!Mike Dugan loved this particular model, even though the frets were vintage Japanese tiny, and the pickups read out a little weak, sometimes a guitar just has a little chime and zing, and this one had it.  Enjoy peeps!
It is also believed that 'Terada Musical Instrument Co., Ltd. of Japan also made some guitars for Ibanez during this period.' It's thought that 'these would be mostly hollow-body guitars, but may also included some solid-body Artist series models.' There is no proof whatsoever for either of these assumptions. It's most likely that this is a big misunderstanding caused by an over generalization in the database of the "Guitar Dater Project" website, which is not able to assign the right factory to a vintage Ibanez guitar based on its serial number. The false information this website generates has been propogated in numerous advertisements of sellers of vintage Ibanez guitars. There is no proof whatsoever of any solid body Ibanez guitar produced by Terada. On the contrary: the fact that the production of solid body Ibanez Artist guitars shifted to Iida Gakki 1987, while hollow-body and semi-hollow Artist guitars became Artstar labels with H serial numbers, shows that the original production before 1987 came all from the FujiGen Gakki factory, which was experiencing capacity problems during that time period caused by their commitment to produce guitars for Fender Japan. If Terada had produced AR models already, they would have continued doing so. The AR and AS models shared the same necks under the Artist flag. Splitting the production up from a situation in which they were already both made in the Terada factory wouldn't be efficient, so it is highly unlikely that pre-1987 AR and AS models were ever made there.
Now, you said that most people you see just crank the tone knob to the maximum and leave it there. That’s fine, and some genres of music actually have no need for a tone control. Heavy metal and hard rock and their derivatives have almost no need for tone control. Guitarists either keep the tone knob wide open and never touch it, or they just buy a guitar that don’t have a tone knob (nor a neck pickup). Guitars made and designed for metal are built this way. I think a lot of country musicians also keep the treble wide open to get that biting shimmery single coil tone.
Originally designed by John Suhr and Bob Bradshaw (a legend in rack-gear rig building), it can be assumed that this machine was built with superior quality and a ton of tone in mind. Well, boy did it deliver all of that and then some! The first and only CAE rackmounted guitar preamp to ever have been produced was a 2-spacer, featuring 3 independent channels for clean, crunch, and lead. One of the notorious drawbacks with preamps has always been the loss of pick attack. However, the CAE never had this issue, providing a wealth of clarity through every channel, and even cleaning up when you rolled back the volume on your guitar to get those classic tones.
He may have spent much of his Guns n' Roses prime shirtless, drunk and surrounded by snakes, but Slash brought good taste and restraint back to hard-rock guitar. "It was a stripped-down rock & roll sound compared to what everybody else was doing," says Slash. He could riff like Joe Perry, and intertwine, Stonesstyle, with Izzy Stradlin. And lyrical solos like the from-the-mountaintop grandeur of "November Rain" were permanently laced into the songs' fabric. "It's hard to play those solos any other way," says Slash. "It will sound wrong."
Electri6ity has been around for a while now, but I think it's still the cat's meow of sampled guitar libraries because of how deeply sampled and deeply controllable it is. Its wealth of articulations will allow you to create stunningly realistic guitar tracks, but the trade-off is that there are a lot of keyswitches and keyswitch combos to learn at both ends of the keyboard, and it's a big library that costs $400. For that reason, it may be a little overwhelming to be a "go to" library, but if you have the ambition to learn and use it, your guitar tracks will have no competition.
There are a huge number of different style tone controls in musical equipment; this hardly scratches the surface. If you’re interested in what your tone controls do to your sound, agood place to look is at Duncan’s Amp Pages, where there is a tone stack calculator that shows frequency graphs of several different types of tone controls. Check out for more info.
A lot of EBay sellers have been calling the Hagstrom solid-bodies of the time Hagstrom-Kent. They are not. If it says Hagstrom on the body, it’s a Hagstrom. If it is one of the Hagstrom guitars that was sold as a Kent, it’s a ‘Kent, made by Hagstrom’. I wonder if the sellers think they can get more for a guitar by associating the Kent name with it. I don’t see how. Perhaps the fact that there are so many Kents floating around, the sellers wanted a more familiar name to hang on the Hagstrom.
Guitar chords songs refers to songs that sound great when played using nothing but chords, whether on acoustic guitar, electric guitar, or both. These songs range from simple arrangements of rock, pop, and country favorites to more songs using more complex guitar chords. The arrangements you decide to play will probably be determined by how advanced your knowledge of chords is.
If you plug your electric guitar into the auxiliary input of your home stereo, you can get away with not buying an amp at all. All you need is a special, inexpensive adapter that you can purchase at any electronic or music store for less than $3. The adapter is just a metal or plastic-coated plug that has a female quarter-inch jack on one end and a male RCA (sometimes called phono) plug on the other. (Just tell the salesperson what you want to do, and he can supply the correct unit.) The following figure shows how the adapter and the guitar cord work together.
Learning how to play guitar on an acoustic style guitar brings about the benefit of forcing you to learn better habits at the beginning rather than unlearning them later, which is exponentially harder to do, because they're a bit more unforgiving about hiding your errors, especially because you won't be hiding behind a string of distortion and reverb pedals.
This guitar also features Epiphone’s patented Locktone Tune-O-Matic Bridge and stop bar tailpiece for serving the easiest string changes and increased sustain. It comes with master volume and master tone controls along with the long-lasting 3-way pickup selector for a bold and controllable performance. The most exclusive feature added by Epiphone is that by pushing a button you can mute all the outputs to add more rock and roll to your performance.
Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.
The Indiana Thin Body Acoustics give you all the sonic punch you need but in a more compact body size. Starting with a spruce top that's matched to mahogany back and sides, the I-TB2 Series were created for acoustic players that find that a traditional dreadnought body size is a bit too bulky. Having a tighter profile gives these guitars and almost electric guitar feel and they're perfect for the stage or studio. Great action and playability right out of the box! An on-board 3 band EQ gives you total control at the touch of a button and all players love the extended cutaway for upper fret access. Sealed diecast tuners, nickel silver frets, gold hardware, high gloss finish and 10 Year Warranty make the Indiana Thin Body Acoustic series a great alternative for any player.
Flanging can be a subtle effect, thickening the sound and imparting a spacey feeling. Or it can be extremely dramatic when cranked up, to the point of making the original signal unrecognizable. This broad range makes a flanger a fun stomp box to experiment with. Jimmy Page used a flanger to good effect on Led Zeppelin’s “Nobody’s Fault But Mine” and “Kashmir, ” as did Jimi Hendrix on “Bold as Love.”
Analyzing the notes you are playing plays an important role while you are performing. The built-in chromatic tuner in these pedals shows you the live feed of your notes whether they are sharp, flat or dead. Similarly, one can bypass the currently selected sound fx for maintaining a pure sound when tuning or completely mute the signal for a uniform silence.
ACT TRMOLO ERSETZEN DER SAITEN Das ACT Tremolo erlaubt zwei Arten der Saiteninstallation. 1) Die Saiten werden durch Einsetzen des Kugelendes in den Saitenschlitz und Einhaken des Kugelendes unter dem Saitenfänger an der Rückseite der Tremolo-Einheit angebracht. 2) Die Saiten werden durch Einsetzen des Kugelendes in den Saitenschlitz und Einhaken des Kugelendes unter dem Saitenfänger an der Unterseite der Tremolo-Einheit angebracht.
Modelling effect – Many BOSS modelling effects use COSM or Composite Object Sound Modelling, which uses computer-processing power to digitally precisely model the electronic, mechanical, and magnetic characteristics inherent to an instrument, amplifier, or speaker, and also to create completely new sounds. Modelling effects can be dynamic or time-based – it can even make your guitar or amp sound like a completely different type of guitar or amp.
DADGAD was developed by Davey Graham in the early 1960s when he was travelling in Morocco, to more easily play along with Oud music Among the first to use this tuning were the folk-blues guitarists of the 60s like Bert Jansch, John Rebourn, Martin Carthy, and John Martyn. It was many years later in the 1970s that it became established for accompanists of traditional music, predominantly Scottish and Irish. Due to this popularity it is sometimes referred to as "Celtic" tuning, although this is misleading given it's origin and it's primary early use in a quite different field of music. Often vocalized as "Dad-Gad", DADGAD it is now common in Celtic music. In rock music, has been used in Led Zeppelin's "Kashmir".[8] Pierre Bensusan is another noted exponent of this tuning. The post-metal group Russian Circles also employ this tuning, and also plays it in the form of all the notes becoming a half-step down: D♭-A♭-d♭-g♭-a♭-d♭'. Three down-tuned variations are used by the band Sevendust: A Drop C variation, or C-G-c-f-g-c'. (used on the song "Unraveling"), a Drop B variation, or B'-F♯-B-e-f♯-b, and a Drop A# variation, or A♯'-F-A♯-d♯-f-a♯. Neighboring tunings D-A-d-e-a-e' and C-G-c-d-g-a have been used by Martin Carthy. Also D-A-d-a-a-d', was used by Dave Wakeling on the English Beat's 1983 "Save It For Later".
With the new Shreddage 2X update released in July 2014, S2 is better than ever. Enjoy a brand-new user interface and totally rewritten engine, with intelligent string / fret selection, new features and options, even more customizable mapping, and new samples like powerchord slides and staccatos. You can also use new built-in effects pedals and save/load your own custom presets to use across multiple projects.
The numbers below the chord tell you which fingers you should be using to form the chord. Finger one is the finger closest to your thumb and then it goes across until finger four is your pinky. The image below shows this labelled for you. If you're playing a left handed guitar you'll have to use the mirror image of these pictures. The thumb doesn't get a number because it is very, very rarely used when forming chords.

Now that you know a little bit of history behind the electric guitar, let’s dive into some of the different types of electric guitars that you can find at Sam Ash. You may be thinking to yourself, “Why are there so many different types of electric guitars?” The reason is this: each and every type of electric guitar serves a unique purpose and will cater to various types of playing styles and musical genres.