So I'm babysitting this guitar for a broke person and I happen to be not so much broke and he left this guitar over here. Not that I'd take advantage of anyone, but after playing it, I wouldn't mind having it. I went through 3 pages of google and didn't really find any info on that or ebay. It's a P37. It's a dread. Looks pretty cheap judging by the ornamentation. It's painted black with decal inlays and all that classy stuff. I haven't measured it but the fretboard is really wide, the neck is really skinny and D shaped. I think it has a shorter scale length too... and the finish looks thin. It seems old because the saddle barely pokes out and the action is still rather high but then the soundboard doesn't belly out. The bridge is raised all around the saddle though, so it could just be a strange bridge setup. It is rather loud. It says "quality handcrafted guitars" under the company name in the soundhole, not sure if I believe it, but the totally different neck, action and volume level than what I'm used to, makes it pretty fun to play.
Catalan guitar is most well recognized as being extremely romantic, often with a slow tempo and careful attention paid to tone quality, note sustain, and voice leading. In contrast, Catalan guitar can also be brilliantly virtuosic, with tempi in excess of 160 beats per minute. Unlike flamenco's improvisational tradition, Catalan guitar music is composed and meticulously notated.
More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.
Maton JB6 is a 1970s guitar manufactured by Maton. It features a thin solid body, short scale 24 fret design, two humbucking pickups, two tone controls, one volume, in/out phase toggle for bridge pickup and standard three way pickup selector toggle switch. The body has double cutaways, set neck and heavy metal base plate supporting a stop piece and bridge for increased sustain.

The guitar pedal community is enormous. From the big name brands like Boss and Electro-Harmonix, to the lesser-known boutique effect pedal brands, such as Big Ear N.Y.C and Adventure Audio (the creators of the Fuzz Peaks pedal). This vast sea of guitar pedal manufacturers makes sure that if there is a tone or sound you are looking for – you can probably find a guitar pedal to do the job. However, sometimes you need something done your way, and that is where building DIY guitar pedals comes in.
Sorry on my previous post - I meant to add that the waveform test should be done using guitars of same distance between bridge and nut so the vibrating string length is identical, and of course using identical pickups. You can then vary the woods, the hardware, the body type (hollow, semi, solid) etc. I think it would be interesting to use guitars with different overall string lengths depending on the stop piece used, whether the strings or through the body, and the arrangement of the tuners on the headstock.

Hybrid bass amplifier heads typically pair a tube preamplifier with a solid-state power amplifier. This provides the player with the best elements of both amplifier technology. The tube preamp gives the player the ability to obtain tube amplifier tone, which tube enthusiasts state is "warmer" than a solid state (transistor) preamp. As well, tube users state that tube preamps have a more pleasing-sounding, natural tone when the preamp's volume is pushed up so high that the bass signal becomes overdriven; in contrast, a solid state preamp that is pushed to the point of signal "clipping" can be harsh-sounding. Some hybrid amp heads have a bypass switch, so that the tube preamp can be bypassed, if the tube breaks or develops a technical problem. The tube preamplified signal in a hybrid amplifier head is then sent to a solid state power amplifier. Compared with tube power amps, solid state power amplifiers are more reliable, require less maintenance, less fragile and lighter in weight. A hybrid tube preamp/solid state power amp thus provides a bass player with the benefits of both technologies' strengths: tube preamp tone and solid state reliability for the power amp.
Enlarging/ Drilling Holes: Often required to upgrade tuners, or occasionally to change control pots. Enlarging a hole in wood seems simple enough, and it is. But it's also an easy way to ruin the finish of the guitar and worse. The problem is because there is no wood in the center of the hole, the edges pull upwards instead of cutting. It often results in large ammounts of chipout or worse. The answer is to run the drill BACKWARDS. This will ream the hole out without the risk of chipping. If the hole needs to be made significantly larger, it is often best to use a bit one size up from the desired hole size and run it backwards till the drill has gone just below the surface. Now you can drill the desired size hole normally relatively safely. The washers or dress rings will hide the slightly larger starting bevel that remains. Whenever possible, drill half way through from both sides or clamp a "backer board" in place. Do NOT use much pressure on the drill, let it do the work, excess pressure is usually due to dull bits, and almost always results in some king of damage. If you must drill through the finish where there is no hole use the same method as described for significantly increasing the size of a hole, but apply masking tape over where the hole will be drilled prior to starting.
On the whole, Decca sold a lot of these guitars but the timing was awful.  By 1968 the demand for electric guitars had decreased dramatically.  MCA was about to bankrupt Danelectro, and CBS was cutting all sorts of corners on Fender instruments.  Darker times were coming folks, but for a moment, let’s rejoice in the mid 60s era of records and guitars!
And finally, it is always a good idea to have your amp set on with clean settings in order to get a clear image of the sound of your effects chain. Hitting the distortion on the amp, for example, will distort EVERYTHING in your chain, so it’s best to leave the distorting to your pedal where it can be better contained. But in the end, experiment! While these are merely a few suggestions of the general way a signal chain works, you are only limited by your creative implementation.
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.

Though because of this flexibility, it can be hard to figure which of the many types of electric guitar is going to be a good fit for your needs. Thankfully, if you’ve arrived at this article you’re going to get all of the information that you need to make an informed decision on which body styles are going to be worth considering for your genre of choice.

With Apple including their Guitar Amp Pro plug‑in in Logic, Sonar coming bundled with Native Instruments' Guitar Rig, and Ableton adding their new Overdrive plug‑in to Live, guitar‑slinging Cubase 5 users might initially feel a bit left out. But you don't have to, because you can assemble some pretty amazing 'guitar racks' in Cubase: it's just that Cubase takes a more à la carte approach, where you need to draw on the existing effects as if they were stomp-boxes. A VST audio channel in Cubase offers inserts for up to eight series effects, including an amp simulator, so you actually have more options than with many pedalboard setups. Furthermore, you can add some quality 'studio effects', like the new Reverence reverb, as send effects. So think of Cubase as 'virtualising' a pedalboard, then bringing it into the studio so that its output can go to studio rack processors.
The Hi Flyer was a thin-bodied reverse Strat-type with a German carve around the top, almost always seen in sunburst. This was identical to the Aria 1702T. The bolt-on neck had a three-and-three castle head, plastic logo, string retainer bar, zero fret, 22-fret rosewood with large dot inlays. A white-black-white pickguard carried volume, tone and three-way. Two black-covered single-coil pickups were top-mounted, the neck slanted back like on a Mosrite, with six flat non-adjustable exposed poles in the center. An adjustable finetune bridge with round saddles sat in front of a Jazzmaster-style vibrato. The plastic logo was still in use in 1971, though gone was the string retainer, replaced by a pair of little string trees. Dots had gotten smaller by ’71, and the Hi Flyer was available in three finishes – orange sunburst (U1800), black (U1801) and white (U1802). The Hi Flyer listed for $82.50 (plus $12 for case) in ’71.
Even though pickups are the main component tasked with interpreting string vibrations and indirectly turning them into sound, your choice of wood still matters. Although the effect is subtle, certain woods will give you better sustain, more definition, and so on.  And in the end it's the accumulation of all of these choices that determine your ultimate sound.
By far the most convenient way to DI guitar is to use a digital preamplifier that combines amp modelling, speaker modelling and effects all in one unit. More flexible still is something like a Roland VG88. This requires the guitar to be fitted with a GK2 compatible hex pickup, but in return enables the system to model pickups and guitars as well as the rest of the signal chain. All these modelling systems sound different to each other and many guitarists say they don't 'feel' the same to play as going via a real amplifier, but, in many situations, the sound you record using them is very much like the sound you hear on records. As you hear exactly the sound you're recording over the monitors while you're playing, you know just how the end result will turn out, so there's little to be said about working this way other than to rely on your ears. Nevertheless, it is worth pointing out that some of the more unlikely combinations of amplifier models and speaker cabinet models can produce unexpectedly interesting results, so don't just rely on the factory patches, most of which I've found not to do justice to the products anyway. The morphing feature used in the Digitech Genesis 3 processor is also very creative, as it allows you to combine the characteristics of two completely different amp/speaker models, sometimes with surprising results.
zircon wrote:Is there any particular reason you're opposed to Kontakt libraries? All of the plugins you mentioned are sample-based themselves, with the notable weakness that you would not be able to change the mapping, grouping, programming (etc), unlike with Kontakt. As someone who uses a lot of virtual instruments, I'd say it's always preferable to have a sample-based instrument in an open sampler plugin since you can see what's going on under the hood and change things like envelopes as needed.
 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.
The Ace Frehley (KISS) signature model, released in 1997 and re-released in 2012, has three humbucking DiMarzio pick-ups, a cherry sunburst finish (AAAA), a color image of Frehley’s face in his Kiss make-up on the headstock, and mother-of-pearl lightning bolt inlays, and Ace’s simulated signature on the 12th fret. There was a limited edition, Gibson Custom Shop run of only 300 guitars that were built with DiMarzio PAF, Super Distortion, and Dual Sound pickups. The production run model was only built with DiMarzio Super Distortion pickups. This was one of Gibson’s best selling artist runs. These guitars are now valued at between $US4,000–12,000.[citation needed]The more recent 2012 “Budokan” model features mother-of-pearl block inlays (no signature at the 12th fret), a Richlite fingerboard, Grover machine heads with pearloid banjo buttons, and a grade A maple top.[44]
Everyone listens to music for different reasons. The transition of 'acknowledgment' to 'love' of an artist or song is an entirely unique experience, starting from smell, location, time of day, time of year, repetitions over time etc., that triggers interest. Obviously, anyone who bashes John Mayer is stuck on radio feeds and needs to explore his music before judging on pop tunes, and almost all Hendrix aficionados are late adopters that buy trends (a marketer's dream).
One and one half steps down from Drop D. This tuning is most often used by modern rock and heavy metal bands. Utilized by bands like A Day to Remember, Slayer (on "Cast Down", "Seven Faces" and "Payback" from God Hates Us All, as well as few songs on Christ Illusion, World Painted Blood and Repentless), Slipknot, Intronaut, Down, Machine Head (tuned 40 cents sharp), Demon Hunter, Chevelle, Origin, Asking Alexandria on their third and fourth albums, From Death To Destiny and The Black respectively, RED (on "Faceless"), Parkway Drive, Skillet (on much of Comatose), Veil of Maya, Bring Me the Horizon (up until Count Your Blessings), Sevendust, Soilwork, Chimaira (on a few songs from The Infection), Eye Empire, Crown the Empire, The Devil Wears Prada, Drowning Pool, The Veer Union, Comfort in the End, Attack Attack!, Mark Tremonti (on much of Full Circle and All I Was, and the songs "Coming Home" and "Home" from Blackbird and AB III, respectively), Nickelback on the song "Side of a Bullet", Disturbed on Immortalized and occasionally Black Stone Cherry, Limp Bizkit, The Kills, and Sucioperro.
ESP calls the body shape "Eclipse", which in the case of this guitar, is crafted from mahogany and paired with an arched flame maple top. The body is then wrapped in amber sunburst finish that complements the beautiful grains of the top. The guitar has a maple neck with a thin U profile and a 24-fret rosewood fingerboard. It is meant to play fast and smooth, with its 24.75" scale length and narrow 1.65" nut width. ESP opted for two Seymour Duncan pickups for this guitar, the '59 Humbucker for the neck and the hotter JB Humbucker on the bridge - both of which can handle both clean and high gain tones.
do you have any iOS devices? So far Garageband and Guitarism are the most convincing guitar emulators ive heard yet. Next to that, for VST i go with RealStrat. But still, its going to track midi for notes that do not exist on a guitar. So while it wont play those incorrect notes through realstrat, it will make exporting midi to tab or sheetmusic a nightmare. Dont sleep on the iOs stuff, particularly because of the input and control methods. You have no idea the difference between a fake strum on a touchscreen versus all manner of keyboard inputs. You spend most of your time trying to emulate plucking in VST guitar apps...

While the other digital amplifiers we tried (the Blackstone ID:Core Stereo 10 V2 and the Line 6 Spider Classic 15) offered a similarly wide range of good sounds, most of our panelists preferred the Champion 20 simply because it was easier to use. Lynn Shipley Sokolow preferred the simplicity of non-digital amps such as the Vox Pathfinder 10, but she said, “The Fender is the best of the digitals because it’s easy to understand the controls.”

The Hi Flyer guitar and bass would be offered pretty much until the end, in ’77. At some point after, probably around ’73 or ’74, the plastic logo was changed to an outline decal logo. Also, at some point the pickups were changed to the distinctive twin-coil humbuckers with metal sides and a see-through pink insert on top. These changes most certainly occurred by the ’76 catalog, when the Hi Flyers were available in four finishes – sunburst (U1815, U1815B), white (U1816, U1816B), black (U1817, U1817B) and a cool natural with maple fingerboard and black dots (U1818, U1818B).
Ovation backed off from its more exotic design directions and in ’77 introduced two more conservative models, the Preacher and the Viper, and its first solidbody basses, the Magnum I and II. The Preacher featured two equal cutaways, whereas the Viper sported more of a Les-Paul-style single cutaway, though neither would never be confused with a Gibson equivalent. Their shape was, in fact, essentially a downsized version of the Ovation acoustic outline. The Magnum shape was derived from the earlier Breadwinner and Deacon, with more contouring.
Chorus is an effect that doubles and detunes your signal. It can add an otherworldly effect to your tone, as well as add emphasis to your playing. Chorus adds shimmer and depth to your signal. While it shines in making clean playing more lush, many players, Zakk Wylde included, use chorus to add a doubling effect to their solos, which really will bring it to the forefront of a song. When used carefully, you can even approximate the sound of a 12-string guitar.
Bring up the topic of electrics, and Martin is hardly the first name of recall. The term “electrics” is not meant to include the company’s many fine acoustic-electric guitars, many sporting top-notch electronics (which ultimately remain acoustic beasts), but rather electric guitars meant for country chicken pickin’ or raunchy rock and roll. However, beginning in the early ’60s, Martin has launched periodic forays into the electric guitar marketplace with some very interesting, if commercially unsuccessful, results (which explains why the Martin name doesn’t come immediately to mind). Most coverage of the Martin brand is focused, quite rightly, on their substantial acoustic achievements. For this essay, however, let’s take an alternative view and look at the company’s various electric guitars, its thinline hollowbodies and later solidbodies.

Not surprisingly, we’ve established that each type of guitar has its good and bad points. For mine, the secret is to look harder at the huge variety of steel string acoustic guitars. For instance, if you’re aiming to eventually play electric guitar, you can choose an acoustic with a narrow fret board, thin neck and cut-away body around the fourteenth fret. This gives you the feel and function of an electric guitar without annoying the rest of the house. You can learn those lightning licks to perfection, before investing in serious electric guitars and amplifiers. The downside? They don’t really cater for percussive, aggressive styles of acoustic playing. The body-thumping, string-thrashing kind. For that, you should look at guitars with more robust neck and body construction.
Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too. 

TASTING NOTES: A straight-on mic always provides the strongest impact and widest frequency range. An angled mic can soften a speaker’s harsh edge while adding interesting texture. In a multi-speaker cabinet, the off-axis mic tends to pick up more sound from the non-miked speakers, adding additional texture via phase cancellation. And while you only hear two mic positions here (straight on and angled), there are multiple off-axis options, from a barely off-center mic to one pointed toward the speaker’s outermost edge. Aim at the center for maximum punch and intensity. Aim toward the edge for slightly softer, more nuanced tones.

Pre-1929: All size 1 and larger guitars, from any year, have 6" long pyramid bridges. All size 2 or 2 1/2 Martins have 5 3/4" to 5 7/8" long pyramid bridges. Most pyramid bridges before 1900 are roughly 7/8" wide, and most after 1900 are 1" wide. The average length of the wings on most pyramid bridges is roughly 1 3/8" During the 1880's and 1890's, however, there is more variation, as much as from 1 1/4" to 1 1/2" On the earlier 7/8" wide bridges, the wings have a very long, narrow, elegant appearance, with a gentle curve to the inside angles of the pyramids, that looks nothing at all like the harsh angles found on many copies. There is no difference between the dimensions of ivory and ebony bridges from the same period.
Pete Cornish (Pete Cornish Ltd.): “Compressors should be first in line from the guitar. Do not use a volume pedal first, as this will defeat any compression, and leave the system with maximum noise if the volume pedal is reduced to zero. I tend to connect any distortion devices and high-gain pedals first in line, and the lower-gain pedals later. I have found that the higher-gain devices control sustain, and the lower-gain devices control the tone if they are connected in this order. Modulation devices can come next.
So don't hesitate; your next multi effects pedals, rack-mounted units and accessories are probably waiting just a few clicks away. The only thing better than a board full of great pedals is one box that combines all those great pedals into a single convenient package - and once you've got that multi effects unit onstage with you, the possibilities are virtually endless for the personalized tones and unique sounds you'll be able to bring to every performance.

My 5056 has pretty high action on it, and these guitars are very bad candidates for neck resets, as the necks were glued with epoxy, not hide glue (which can be softened with heat). Anyone who looks at buying a vintage Alvarez should bear this in mind if the action is high. There may be no practical remedy (Search web for comments on it.). And those who own them should probably stay away from heavy string gauges, i.e., not bigger than .12's on high "E". I now de-tune my Alvarez guitars when I put them away for longer period storage even though I use 11's on them. If you do use heavier gauge strings, you might want to de-tune when putting away the guitar. Just a suggestion. Cheers.
• Why frets come loose: Wear from string contact, fretboard drying and jarring mid-gig or during transportation can cause frets to pop loose. And if binding loses moisture, that can cause the ends of frets to rise or be exposed. These all create troubles that can wrongly be blamed on the more typical problem of fretwear, but in these cases dressing or replacement isn’t necessarily the answer. If there’s enough fret wire left, a loose fret can be reseated in its slot along the fingerboard, and a skilled luthier can often fill the gaps between the binding and the fret ends.
Overstock SaleNew ProductsVacuum TubesSpeakersAccessoriesAmplifier PartsBooks & DVDsCapacitor Amplifier SetsCapacitorsCoversEffect Pedals & PartsEnclosuresFootswitch BoxesGift CertificateGrill Cloth, Tolex & PipingGuitar PartsHardwareJacks & PlugsKeyboard PartsKitsKnobsLuthier ToolsMaintenance ProductsPMT Tone ModsPotentiometersPower AccessoriesRadio & Antique Equipment PartsResistorsReverb TanksSemiconductorsSpeakersSwitchesT-shirts/GiftsTech SuppliesTerminal Boards & StripsTransformers & ChokesVacuum Tube AccessoriesVacuum Tube Amplifier SetsVacuum TubesYellow JacketsZero Glide Nuts
With the PAC112V there is no harm going with the crowds. The Pacifica is a crowd-pleaser precisely because of its versatility – and so whilst it might have a very recognisable look, this electric gives you the opportunity to craft a sound that is entirely your own. The only drawback is its weight, which is not much of a drawback at all – particularly for this price.
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
Tone woods only effect acoustic or hollowbodys. The more dense wood harder tighter grained woods along with steep pitched saddle to stop string angle increases sustain.research labs experimented with marble body's and had tremendous sustain.also effecting sustain is type of bolt on set or thru. A bolt on May have equal sustain to a set if the thickness of body at bolt joint is made thicker but thru are best all have give and takes. Thru are less adjustable and limit repairs. Bolt on offer more adjustment. Set necks can be replaced or reset but cost more to do so. Thick heavy gibson let Pauls are known for the sustain.but endurance limited by heavy weight. It's all matter of choice. Buy usa or if not available japan. Stay away from Chinese or Korean they are bottom feeders
Small guitars were often looked at as mere travel or couch alternatives, but times have changed and they are making a comeback on big stages. The LX1E Little Martin is at the forefront of this rekindled interest, with artists like Ed Sheeran impressing big crowds with just his humble and small LX1E. Thankfully, its price has remained stable despite the its current worldwide recognition.
As these same makers ramped up for digital production, digital choruses naturally joined the team. The effect as produced digitally might sound broadly similar, but it is done differently than in the analog circuits. Digital chorus pedals double a signal and add delay and pitch modulation to one path, the latter wobbling below and above the pitch of the unadulterated signal, which produces an audible out-of-tuneness when the paths are blended back together. It’s hard to fault the power and range of control that digital technology affords, and this version of the effect has been hugely successful, but many guitarists still prefer the subtle, watery shimmer of the analog version. Conversely, the same ears often find the digital variety makes them a little queasy.
With this in mind, rather than taking the category chronologically, let’s accept our good fortune in today having all of history’s distortion sounds at our fingertips—so next time out, we’ll look first at those which transform the guitar and amp’s natural tone least, working toward those which balls it up most. In other words, from the least synthetic to the most synthetic-sounding of the genre.
Marty is another player who’s built up his videos and YouTube Channels over a number of years and it’s become a vast resource for lessons at all levels. There’s a lot of stuff about how to play particular songs or how to mimic a certain musician’s style, but mixed up with these are plenty of absolute beginners’ lessons that teach the basics. There are some guest artists explaining different techniques, but mostly Marty’s The Man. The good thing about Marty is his great patience during the videos—he takes plenty of time to explain things and demonstrates them nice and slow, so you hardly ever have to stop and rewind the videos. Marty has a quirky sense of humour, too. It takes the hassle out of the harder lessons to master. He has a good website linked from his YouTube channel and a few cool, free giveaways. Check that out at
You might expect PRS's budget take on its venerable Custom 24 to pale in comparison to the real deal, but that certainly isn't the case. Considering the price, this is one impressively put-together instrument; we scoured our review model for signs of the guitar's price tag, and all we could find was a slightly loose vibrato arm fitting - a minor point. Like the traditional USA-made Custom 24 design, there's no scratchplate, so the SE Standard 24's electronics are installed in a cavity. The non-locking SE-level tuners are smooth-handling, and visually, you'd struggle to distinguish the vibrato from top-end PRS guitars. The SE Standard isn't quite as refined or sleek a playing experience as PRS's S2 and above models, courtesy of the chunkier Wide Thin profile, higher action and slightly creaky vibrato response, but a more player-personal setup helps to rectify that. The tones are here, though: searing solos, toasty rhythms and coil-split quack are all within reach – at this price, it's an impressive performance from one of the best electric guitar brands in the market.

Some acoustic guitars, regardless of the body style, feature a cutaway in the upper bout to allow players to more easily reach the higher frets on the guitar neck. Phil Keaggy, a prolific and highly celebrated American guitarist, usually uses an acoustic guitar with a cutaway. If you plan to play leads on your acoustic, or are used to playing an electric guitar, you may prefer a guitar body with a cutaway.
The amps have a simple control set on the front panel: all versions have Gain, Tone and Volume controls except for MV50 Clean, which has Treble, Bass, and Volume. Also on the front panel is a small "VU" meter, and a 1/4" input jack. On the rear panel are a 1/4" speaker output jack, and a 1/4" headphones/line out jack. The amp includes cabinet simulation at the line out jack, and can thus be used as a DI to go straight into a mixer or recorder. There is also an EQ switch to select between "Deep" and "Flat." The Deep setting is intended for use with smaller cabinets where mids and highs tend to overwhelm the low frequencies, and Flat is designed to allow the amp to work with larger cabinets where the lower frequencies are more naturally present. Also present on the rear panel is the DC19V in jack, and the ECO on-off, standby-on, and Impedance switches with the following two exceptions: MV50 Clean has no Impedance Switch but instead has an Attenuator switch allowing the choice of either full power out, 1/10th power out, or 1/100th power out, and MV50 High Gain, which has no Impedance Switch but instead has a Mid Ctrl "minus/Norm/plus" switch allowing boost or cut of the amp's mid range.
The Gruhn Guitars repair shop has been world renowned for decades for its unrivaled expertise, skill, and respectful repair practices. Though our full-time staff of luthiers primarily focuses on repairing and restoring the instruments we make available for sale, beginning in 2016 we are also pleased to offer our repair services to loyal customers as an extended benefit of buying an instrument from Gruhn Guitars. Instruments purchased from Gruhn Guitars will be moved to the front of our repair queue and will be repaired at a discounted labor rate. As a sign of our appreciation for your business, Gruhn Guitars is here to help you for years to come to keep your instrument in the same prime working order as when it was listed for sale at the shop.
Best Songs of 2018Best Songs of All TimeBest Singers of All TimeBest Guitarists EverBest Eminem SongsBest Metallica SongsTop 10 Linkin Park SongsBest Green Day SongsRockerboyBest Albums of All TimeBest Female Singers of All TimehayreanmarjonBest Avenged Sevenfold SongsBest Beatles SongsGreatest Music Artists of All Timecamp0112Top Ten Best Music GenresRHCPfan
The Streamliner concept is simple: to create more affordable Gretsch guitars without losing their specific DNA. Two new Broad'Tron humbuckers are controlled in classic Gretsch style by a three-way toggle selector switch on the bass side shoulder, a master volume on the treble side horn, and then a trio of controls by the treble-side f-hole for individual-pickup volume and master tone. The G2622's construction gives a different response and resonance to other new releases from Gretsch and, with these pickups, moves further from the Gretsch sound. And while its construction gives it a more solid, or at least ES-335, character, it's a little more airy and less punchy with a softer, squashier tonality. The beefier pickups certainly don't nail a classic Gretsch tonality - although if that's what you want, the full-size pickups are easy to replace - but they do broaden the sonic potential, especially for more gained styles, while staying close to the classic iconography. If you want a great-value semi-hollow, this is among the best electric guitars for under $500.
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
Every generation there's one guitar master whose touch can make a guitar purr; whose grasp of his skill is so complete that just by looking at the guitar, he knows her problem; and whose ears can pinpoint what your tone is lacking. They are legends. And the mystique that surrounds these guys is hard to penetrate. Swank is one of those guitar masters. "I think part of my mystique now is that I'm just flaky and don't return phone calls," he says. "It's not that I'm some kind of badass." Swank was first introduced to the business of guitar repairing when he saw another master's work. "I just thought it was a pretty noble pursuit."
The F-55 was identical to the F-50 except for the addition of a bridge DeArmond humbucker, plus the attendant three-way toggle on the cutaway horn and a second set of volume and tone knobs flanking the treble f-hole. The F-55, too, had a Martin “M” trapeze tail. This series began with guitar #279831. Some 1,700 F-55s were made from mid-’62 to the summer of 1965.
So you want to learn how to play guitar but don’t know where to start? No worries. This how to play guitar for beginners guide will cover all the basic requirements to get you started with playing guitar. The guide is split into 2 sections: The Basics – where you’ll learn about the various parts of the guitar, how to hold the guitar and how to tune your guitar. Playing – where you’ll learn popular chords, strumming techniques, and how to read guitar tabs. This guitar for beginners guide is meant for guitarists just starting out, however there are also tips and
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: ibanez","reportSuiteIds":"guitarcenterprod","pageName":"[gc] shop by brand: ibanez","eVar3":"shop","prop2":"[gc] shop by brand: ibanez","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop by brand: ibanez","events":"event1,event31","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"ibanez","prop5":"[gc] shop by brand: ibanez","prop6":"[gc] shop by brand: ibanez","prop3":"[gc] shop by brand: ibanez","prop4":"[gc] shop by brand: ibanez","eVar1":"ibanez","prop9":"2875","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section","prop8":"ibanez"}
The Martin D-28 is a modern recreation of the dreadnoughts that came from Martin's "golden era", which falls between 1930 to 1940. Since vintage D-28 specimens that were built in the '30s were being sold for more than 30 grand, the company decided to give today's guitarists a chance to own one at a more reasonable price point. Carrying with it the same premium all-solid build that include a solid Sitka spruce top, solid east Indian rosewood back and sides, solid mahogany neck and solid ebony fretboard - you can expect this acoustic guitar to sound as Martin-y as possible.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]
My first guitar was a fender knockoff. My first professional guitar was a Gibson LP custom. I like the richer tone of the Gibson for ballads, folk and country and the Fender gives you the edge you need for rock, garage and loud stuff. Foot pedals get the sounds you need for just about any style of music with either brand. The fender neck is a bit easier to move over because it is thin and fat-fingered guys like me need a bit of help that way. The Gibson reminds me more of my acoustic guitars. Strings are an important selection for any guitar to be comfortable and get the right sound.
{ "thumbImageID": "Pursuit-Exotic-Concert-CE-Myrtlewood-Acoustic-Electric-Guitar-Bourbon-Sunset-Burst/K35888000001000", "defaultDisplayName": "Breedlove Pursuit Exotic Concert CE Myrtlewood Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Bourbon Sunset Burst", "sku": "sku:site51500000124748", "price": "599.99", "regularPrice": "699.99", "msrpPrice": "865.00", "priceVisibility": "1", "skuUrl": "/Breedlove/Pursuit-Exotic-Concert-CE-Myrtlewood-Acoustic-Electric-Guitar-Bourbon-Sunset-Burst-1500000124748.gc", "skuImageId": "Pursuit-Exotic-Concert-CE-Myrtlewood-Acoustic-Electric-Guitar-Bourbon-Sunset-Burst/K35888000001000", "brandName": "Breedlove", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The 2019 Gibson Les Paul Standard sports a mahogany back with an artisan-grade AAA figured maple top and a mahogany neck with Ultra-Modern weight relief. This chambering technique is provides a solid core through the center of the guitar, retaining the classic Les Paul sound and making the guitar less prone to feedback. The Ultra Modern weight-relieved body also makes playing long sets a breeze. The neck has an asymmetrical Slim Taper neck profile for increased playability and comfort.
The third technique I would like to talk about today consists in, once again, doubling a distorted, or not, guitar sound with a...folk guitar. This will give you much more definition and sustain on arpeggios, while on rhythm guitars it will allow you to highlight the sound's percussive aspect, and on power chords it will make your sound more powerful. This production technique has been around for ages (Led Zeppelin was pretty fond of it, for instance). But this doesn't mean that it's an outdated trick and it can't be used on modern productions: lots of contemporary metal bands still use it nowadays.
I must confess -- I am horrible at soldering. So after messing up another wiring harness with my soldering skills, I came across ObsidianWire and purchased out of desperation. Now I wish this would have been my first choice. The wiring sounds awesome, it was a breeze to install and the included switch and input jack completed the upgrade. I would HIGHLY recommend ObsidianWire harnesses." - Ross G Vintage 50s Wiring for Les Paul
Rock On Good People (it’s actually rockongoodpeople) is another YouTube channel really designed to funnel viewers towards the creator’s website, which—no surprise—has heaps of stuff you can buy. But that doesn’t mean that Rock On Good People doesn’t provide a long list of free videos ranging from lessons for beginners through to how-to-play-techniques aimed at experienced players. What I like about Rock On Good People is the cool vibe you get from all the presenters, no matter the style or subject of the lesson, and some of the videos take you further down the guitar-playing track with themes like “Tips For Improving Your Live Shows”. That might seem a long way off, when you’re currently trying to get your head around playing basic barre chords, but these videos have hints and advice that are good seeds to plant in your mind early, even if you’re still some years off jumping off your first Marshall stack and into the mosh pit.

{"product":{"id":"113884849","stock":"instock","price":"219.99","name":"Thunderbird IV Electric Bass Guitar","download":false,"sku_id":"113884849","checksum":"117352072023","rep_id":"site5113884849","displayId":"113884849","sku_display_id":"113884849","sku_rep_id":"site5113884849","gc_pro":false},"category":"Electric Bass","pageName":"product_detail","subcategory":"4 String Electric Bass","dept":"Bass"}

I purchased this about 8 months ago (it is my first acoustic guitar) so I could learn to play again, I'm a singer by trait, but wanted to pick up a guitar again after a very long break. I did not want to spend a lot of money, but I didn't want junk either, while at the same time I wanted something that would translate well into performing live too. I did my research, and personally, it came down to this or the Yamaha APX-500 (But I really want the Mrk 1 not 2), so I settled for this.
From the 1920s to the 1940s, upright bass players who wanted to strengthen the acoustic sound of their instrument had to use small portable PA systems or guitar amp combos designed for acoustic guitar or archtop guitars. Since these systems were not specifically designed to amplify bass instruments, it is unlikely they provided good low-frequency sound reproduction (particularly guitar amps, which are not designed to go down as low in pitch as the low E (41 Hz) and A (55 Hz) strings). In the early 1920s, it was very hard for an upright bass player (indeed for any musician) to find any amplifier and speaker system to make their instrument louder. The only speakers that could be bought during the early 1920s were "radio horns of limited frequency range and low acoustic output", and the cone speaker (which is widely used in modern-era amp cabinets), was not offered for sale until 1925. The first amplifiers and speakers were PA speaker setups; while an upright bassist could potentially have used one of these early PA systems, they could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
The best way of working out which contact is which is to use a multimeter and see for yourself which contacts are connected to each other in the 5 switch positions. On the Fender-type and some import-type switches you’re given a good clue because you can actually see the mechanism or see through the switch casing. Watch this as you move the switch through the 5 positions – you can see which contact is always in circuit (the wiper) and which ones are in circuit in each position (1, 2, 3, 4 and 5). This method of visualising the switch also helps when it comes to fitting the switch to your pickguard and getting it the right way around! Now, where does the wire from the bridge pickup go again…

Epiphone was once among the most significant competitors of Gibson. Later on, Gibson acquired them and, now, Epiphone form sits budget-friendly. However, the popularity of Epiphone as one of the best electric guitar brands was always there owing to their affordability and near to top-notch quality. Thus, choosing an Epiphone Les Paul guitar doesn’t mean you have to compromise much on the tone and specs. In fact, you get a guitar with specs comparable to Gibson – that too – on a much cheaper rate.
Rock ’n’ roll is an industry that’s continually pushing musical, social, and cultural boundaries, and the electric guitar is its iconic instrument. The acoustic version has been around since at least the 16th century. So when I first started working with co-curator Gary Sturm on an exhibition about the invention of the electric guitar at the Smithsonian’s National Museum of American History, our driving question was: Why electrify this centuries-old instrument? The simplest answer: Guitarists wanted more volume.

Honestly, a couple of years back I never looked at Fender for acoustic guitars because everyone was always talking about Taylors, Gibsons, Martins, Takamines, Paul Reed Smiths etc. Despite being a very good electric guitar company not to mention the inventor of the no. 1 guitar in the world, the strat, everyone always looked Fender, alongside with Ibanez and Washburn (good electric guitar brands) as bad acoustic manufacturers. I was one of them too. For me, Washburn and Ibanez might be a good budget acoustic guitar manufacturer but they don't deserve to be high in this 'top acoustic guitar brands' list. But for Fender, these past few months my mindset about them changed. I never realized how authentic and good sounding fender acoustics were way back then but I'm happy now that I changed my mind about them. I love them now. It's not about having vintage acoustics, or having high end prices. Fender don't set their prices as high as taylor, martin or gibson but they must not be judged ...more
By 1954 the Teisco line had begun to grow. Some valuable reference is available in a Japanese history of Teisco guitars, which is written completely in Japanese (which I unfortunately can’t read). This has an early photo of the company’s founders and presumably engineers and designers, mugging around a car parked in front of the Teisco factory. The photo is from the ’50s (1954 or later), and the instruments in their hands and surrounding them are at the core of the ’50s line. Shown were two small Les Pauls, two single-cutaway archtop electrics, at least three Hawaiian lap steels, and at least four amplifiers.
A lot of people begin with a nylon string acoustic, often called a classical guitar. They’re reasonably priced at beginners level (don’t go too cheap), the design has a wide fret board to accommodate your inexperienced fingers and the nylon strings are easier on your aching fingertips. You have to agree, they can sound kind of dull unless that dream of yours is of becoming a famous, classical guitarist like John Williams — certainly not a bad thing. So nylon string acoustics are great to learn with, but there’s a risk you’ll want something more pretty quickly.

Absolutely love this guitar!! One great instrument for a great price. Ordering was easy and delivered before projected date. I am no professional by any means, but as I've progressed, I wanted a guitar I could grow with and play for years to come. This is it!! I've played a lot of acoustics ranging from Gibson to Taylor but absolutely love this Martin. The action is like butter and coming from the Martin collection, the sound and tone is at a minimum of FANTASTIC!! If you are looking for an outstanding piece of musical magic to add to your collection, or something to purchase to have for a lifetime without spending your life savings to obtain it, this is the one you are looking for.
Cadsoft Eagle is a very popular tool with pedal builders. A basic version can be had for free. There are limitations on board size and number of layers in the free version, but these won’t come in to play for the majority of basic analog effects pedals.  Element14  includes a host of documents and tutorials.  If you get into complex designs or full professional use later,  full versions of Eagle, at time of writing cost $575, and $1640.
When you've put your blood, sweat and tears into developing your talent, you want your music to sound amazing. And with the proper recording gear, you can ensure your sound is captured exactly how you intended. From audio interfaces to studio monitors to extremely powerful subwoofers, this section's wide range of recording gear offers up plenty of examples of ways to make your recordings better than ever. The right audio/video arrangement can take the stress out of recording, giving you more time and energy to concentrate on what's most important - your music. If you're unsure where to start the search for recording gear, checking out some of the top-rated and best-selling products is definitely the way to go. Want to attach your mic directly to your PC or Mac? The Blue Icicle performs dual functions as an XLR to USB adapter and a studio-quality microphone preamp. Offering a quick and easy way to perform digital and audio recording, this handy tool is a must for every musician's gear bag. Maybe you're in the market for a studio monitor? If that's the case, the Mackie MR8 mk3 8" 2-Way Powered Studio Monitor is a fantastic choice. Built with a clear focus on accuracy, this low-profile studio monitor is perfect for musicians who really want to capture the full character of their music. This section is also home to an assortment of GoPro video cameras. With a GoPro, you can record your set firsthand from the stage, giving your fans a unique "view from the top." Take a look at the GoPro HERO+ LCD for example - this camera captures your world in stunning HD video. It's rugged, waterproof and built into its own protective case - exactly what you need to record those high-energy shows. Another fantastic GoPro option is the HERO4 Session. Smaller and lighter than any other GoPro currently on the market, the HERO4 Session captures 1080p60 video and 8MP photos in a simple design that's so compact it can go just about anywhere. This is just a quick sampling of what's available when it comes to recording gear. There are lots more products to consider, so spend some time browsing through them - you never know when the right piece of equipment is going to leap off the page and into your professional setup.
For easy, go-anywhere amplification, start out with a combo guitar amp. These all-in-one units combine the preamp, power amp and speakers into one piece, which makes them ideal for places where you want to set up and tear down in a hurry. Rehearsals and busking are easier with a combo amplifier, and they're great for small venues that don't need the power of a larger amp. The combo is your basic, high-versatility amp, and no guitarist should be without one.
The color black is powerful, mysterious and evokes a sense of potential and possibility. It’s widely regarded as the single most popular color for Rock ‘n’ Roll thanks to rock pioneers such as KISS and AC/DC. Get back in black with these fine offerings from Dean with our vivid take on the classic black electric guitar with a few other shades thrown in for good measure. Plug in and play. Get your wings!
Gibson guitars have a shorter 24.75-inch scale length, giving them a looser feel and a somewhat warmer tone. They feature resonant tonewoods, typically mahogany for the body and neck. The neck is set in place and glued instead of bolted. Les Paul-style instruments have carved tops made from another tonewood such as maple, but other instruments such as the SG have flat tops like the Strat. If something goes wrong with this kind of guitar you may be able to repair it yourself, but issues like broken necks and headstocks require work done by a professional luthier.
Thanks, guys....well, I don't think I'll be able to play any Agiles but I'll try and get my hands on some Epi's and give them a whirl. How are the stock pickups on both? Definitely in need of a swap? I had an Epi Les Paul an eon ago and don't recall liking the stock pickups, but I was also in highschool then and knew nothing about tone. Also, a quick look at Ebay indicates that any Epi SG in a color other than black or cherry will be hard to come by...

Juszkiewicz, 64, is known for being temperamental, ultracompetitive and difficult to work for. A former Gibson staffer recalls a company retreat in Las Vegas punctuated by a trip to a shooting range, where executives shot up a Fender Stratocaster. In recent years, Juszkiewicz has made two major pushes, both seemingly aimed at expanding a company when a product itself — the guitar — has shown a limited ability to grow its market.
B.C. Rich specializes in guitars for the heavy metal and hard rock crowd. They’ve produced some of the most legendary designs in the history of metal, including the Warlock, Bich, Virgin, and Mockingbird. Their instruments helped to mold the hard rock and thrash revolution of the 1980s and B.C. Rich is still a great choice for any guitarist looking for an instrument that looks and sounds as edgy as possible.
Featuring a comfortable neck and solid spruce top, the Epiphone Dove Pro Acoustic-Electric Guitar rings out with full, rich sound. Based on a design going back to 1962, the Dove Pro is equipped with a Fishman Sonicore pickup system that accurately reproduces its acoustic tone when you plug the guitar into an amplifier or PA system to play with amplified instruments. A terrific value.
Conventionally, guitarists double notes in a chord to increase its volume, an important technique for players without amplification; doubling notes and changing the order of notes also changes the timbre of chords. It can make a possible a "chord" which is composed of the all same note on different strings. Many chords can be played with the same notes in more than one place on the fretboard.
In this buying guide, you’ll learn the essentials of what effects pedals do and which ones to look for depending on the kind of tone you want to experiment with. Here’s the quick overview: effects pedals (also called “stompboxes”) are electronic devices that connect in-line with your guitar and amp to change the signal going through them. Some work with analog circuits and some are digital, but they’re all powerful tools for shaping your sound in endlessly creative ways.

Guitar pedals and other effects, including an early version of the wah-wah pedal used by Jimi Hendrix and the Tone Bender fuzzbox pedal, a Vox variation on the famous original Gary Hurst Tone Bender (used by Jimmy Page of Led Zeppelin and Jeff Beck of the Yardbirds as well as The Beatles, Spencer Davis and others), were also marketed by Vox and later on manufactured in Italy.
I had a single-minded desire for single-ended tone, but I didn’t want to drop insane moolah on a tweed Champ (or any of the tweed Champ clones out there, or even a tweed Champ kit), cool as they may be. Heck, even a Silverface Champ is going to set you back in the $300+ range these days. And it’s a Fender. Dependable? Yup. Great sounding? Sure. But no one is going to see it and say, “What the hell is that?” Which is part of the fun for those of us involved in the weirdoes and freakazoids of the gear world.
Washburn is an EXCELLENT brand. I have owned an N4, 2 N2's, and their latest, cheapest Nuno model for my daughter. My daughter's guitar is amazing for the price I wish I had such quality for my starter guitar. I would put my N4 up against ANY guitar- period. Plus, whenever I have contacted the company, they have top notch customer service. I know this isn't about amps, but I wrote them about an issue I had with my Randall amp ( a division of Washburn). Without me asking, they mailed me an amp part with an apology. Top notch.
Fuzz gained much glory from the sixties and seventies when popularized by musicians such as Jimi Hendrix. Today, fuzz pedals have evolved into a staple for some bands and is capable of producing everything from a singing, warm sustain to a scratchy, velcro sound. The mainstay of a fuzz pedal's sound is produced by an electrical component called a transistor. Fuzz pedals today can be created from silicon transistors, or germanium transistors. Silicon is known to produce a slightly harsh or bright sound (some consider it sterile) while germanium typically accentuates the low end and produces a warmer sound. Just as extreme settings on a silicon fuzz pedal can easily produce a harsh, glass-like sound, extreme settings on a germanium transistor based fuzz can produce an overly warm, and muted tone.

: Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.

Randall deserves to be up here in this list. Don't get me wrong, they've got a lot to contend with, in Orange and Mesa Boogie in particular, but Randall have always crafted excellent amps. Rugged build and vast tonal opportunities make this brand a mighty force, I mean they were good enough for Dimebag Darrell and countless others, enough said really...
• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.
{"id": "J40301", "skuOrProductId": "J40301", "categoryId":"site1AAG", "name":"Les Paul Special Vintage Edition Electric Guitar", "pageUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"Epiphone introduces the Les Paul Special VE (Vintage Edition) electric guitar featuring the classic Les Paul profile with a lightweight Poplar body. The Les Paul Special VE is powered by Epiphone Open Coil humbuckers and is available in beautiful “Vintage Worn” color finishes.

For decades, the Les Paul Special has been one of Epiphone’s best selling electric guitars. And the new Les Paul Special VE—inspired by the Les Paul, the greatest electric guitar in rock—continues the tradition of giving new both players and pros a real Les Paul at a price anyone can afford.

Case sold separately.

Classic Les Paul profile
The Les Paul Special VE has a Poplar body with a sleek look thanks to the Vintage Worn finish and no binding on the neck or body. The Les Paul VE is cut to the same classic profile of all Les Pauls and has a comfortable and fast Mahogany bolt-on neck with a 1960's SlimTaper D profile. The Rosewood fingerboard has traditional Pearloid "Dot" inlays, a 24.75” scale, a 14” radius, 22 medium jumbo frets, and a standard 1-11/16” nut. Just below the headstock is the famed “bell” shaped truss rod cover found on every Les Paul since the early '50s with “Vintage Edition” in white. 

Epiphone Open Coil Humbuckers
The Les Paul Special VE features Epiphone’s world famous open-coil humbuckers with a warm 650R in the neck position and a slightly hotter 700T in the bridge or lead position.Controls include a 3-way pickup selector switch, a Master Volume, and a Master Tone control, each with traditional “Black Speed Knobs” pots with long lasting
500K Ω potentiometers.

All-Metal Hardware
Epiphone features all-metal rock solid hardware on all of its instruments. The Les Paul Special VE comes standard with the legendary Locktone Tune-o-matic bridge and Stopbar tailpiece for easy set up. Tuning is fast and reliable with Epiphone Premium Covered tuners with a 14:1 ratio.The higher the ratio, the more accurate your tuning. The tuners are mounted on an Epiphone Clipped Ear headstock with Les Paul Model in gold and the Epiphone log in silver. In addition, a "2016" Edition logo is on the back of the headstock. 

All Epiphones come with a Limited Lifetime Warranty and Gibson’s world famous 24/7/365 Customer Service.", "value":"131.12", "priceMin":"131.12", "priceMax":"149.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"40", "inventory":"57", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"4.0", "reviewStarRatingInteger":"8", "reviewHowManyReviews":"17", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "Best Seller", "checksum":"93895071200", "priceVisibility": "1"}

In the 1960s, the tonal palette of the electric guitar was further modified by introducing effect units in its signal path, before the guitar amp, of which one of the earliest units was the fuzz pedal. Effects units come in several formats, the most common of which are the stompbox "pedal" and the rackmount unit. A stomp box (or pedal) is a small metal or plastic box containing the circuitry, which is placed on the floor in front of the musician and connected in line with the patch cord connected to the instrument. The box is typically controlled by one or more foot-pedal on-off switches and it typically contains only one or two effects. Pedals are smaller than rackmount effects and usually less expensive. "Guitar pedalboards" are used by musicians who use multiple stomp-boxes; these may be a DIY project made with plywood or a commercial stock or custom-made pedalboard.