To show you how to read the chords diagrams above, let's use the A chord as an example. For the purposes of chord diagrams, here is how your left-hand fingers are numbered. As you will notice, the index finger is denoted with number 1 the middle with 2 the ring finger with 3 and the pinky with 4. These numbers are used on the diagrams to show you what fingers use for pressing the frets composing the chords.
I just noticed that no-one has mentioned Robben Ford – another master of both technique and taste and a certain contender for my top ten list, fighting for a place in the same space as Larry Carlton and John Scofield. (John Mayer can certainly play, but for me, any of those three offers at least as much technique, and a wider range of accomplishments, than JM – check out their various versions of “I don’t need no doctor”).

Teisco first began importing guitars to the United States under their own brand in 1960. In 1964, the company then switched the name of their U.S. brand to Teisco Del Rey. The company was then sold in 1967, and the Teisco brand name stopped being used for guitars sold in the United States in 1969. Guitars were still sold under the Teisco name in Japan until 1977.
The Yeah Yeah Yeahs’ theatrically coiffed guitarist has several grueling jobs, among them holding down the trio’s entire melodic structure and holding his own against one of the most dynamic frontwomen of our time. His signature see-saw call-and-response lines leave plenty of room for tension and release, war cries, and tears, and the kind of grand, clanging chords that’ll turpentine your ears clean.
Hi Torch, appreciate the work gone into this , fantastically informative piece. Good to see such a following as well , too many Gibson / Fender fanatics out there that dismiss Jap / Asian guitars as inferior. Having played god knows how many guitars over 50 years I've had good and bad in both top and lesser known brands. Started off at 15 years old with a Tiesco ( cost me £15 S/H at the time. lol ). Admittedly it was a piece of junk, but hey it got me started. Just picked up a Strat copy made in China for £10 ( as new condition) Branded Excell , out plays my Aria by a country mile. I have an old acoustic here about 40 years old, cost £62.50 at the time. No place of origin , serial No or anything. Imported by Rose Morris with the brand Avon on the head stock. This baby out plays any acoustic I've ever played, including a couple of Martins, As any guitarist should know a guitar is how it feels and plays not it's name. Nothing wrong with Jap / Asian guitars , could be made in Iceland for all I care it's the guitar that counts. Keep up the good work. Regards and thanks.
Additionally, George Harrison used a custom-built rosewood Telecaster during the recording sessions for The Beatles‘ Let It Be album (including the rooftop concert), played through aLeslie speaker; Big Twist and the Mellow Fellows guitarist Pete Special frequently had reissue of Harrison’s Tele onstage in the mid-1980s, but rarely played it. Pearl Jam singer and guitarist Eddie Vedder has been known to use a custom black Telecaster with a white pickguard containing a black arrow decal pointing towards a target design under the strings. Guitar virtuoso Chet Atkins, known for the variety of acoustic and electric guitars that he used, occasionally played a Telecaster in his duets with Jerry Reed.[6]

Cool! Yes, this idea is definitely stolen from G&L!It would be cool to see a picture or schematic, but it’s probably going to be really close to this, if not identical. Meanwhile: Don’t be scared to open up your guitar — they’re build for it! Just be gentle till you learn what you’re doing. I always stand by the Maker’s Faire credo: If you don’t open it, you don’t own it. 🙂
Finally, there were some twelve Hawaiian lap steels in ’55, the EG-NT, EG-K, EG-Z, EG-A, EG-S, EG-R, EG-L, EG-7L, EG-P, EG-8L, EG-M and EG-NW. Again, since I have no reference materials, there’s no point in attempting any description. However, many of these guitars continued on into the ’60s where we’ll discuss them in detail, and you can probably extrapolate backwards to these mid-’50s models, allowing for pickup changes, etc.
{"id": "H91419", "categoryId":"site5AAH", "name":"Artstar AS153 Semi-Hollow Electric Guitar", "pageUrl":"/Ibanez/Artstar-AS153-Semi-Hollow-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Artstar-AS153-Semi-Hollow-Electric-Guitar-Jet-Blue-Burst/H91419000002000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "msrp":"1,377.76", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"879.99", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"15", "brand":"Ibanez", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"7", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LAAA,site5LFMIC,site5HBA", "stickerText": "Top Rated", "isVintage": "0", "outletonly": "2", "checksum":"637145126000", "priceVisibility": "1", "itemType": "New"}
Ritchie Blackmore: a variety of versions, each with a 22-fret neck, CBS large headstock with 1970s-style decals and two Gold Fender Lace Sensors; some variants have the neck set into the body rather than bolted on and a Roland GK2A synth pickup. Reintroduced in 2009 with a 21-fret maple neck, graduated scalloped rosewood fingerboard, Bullet truss rod nut with 3-bolt neck plate and Micro-Tilt neck adjustment, flush-mounted Jim Dunlop locking strap buttons and two Seymour Duncan Quarter Pound Flat single-coil pickups (the middle pickup is omitted, but the pickup hole for the middle pickup is still present).[15]

Speakers and speaker stacks are a necessary partner for standalone amplifier heads. Take the total power level into account when you're looking at speakers, ensuring you're getting a stack with the muscle you need for the venues you play. Speaker configuration is also important, with larger woofers delivering more powerful bass and smaller tweeters bringing through the high-end.
For those who just start to learn guitar, buying the expensive decent guitars is not a must. You can buy an affordable entry level guitar under those famous brands or buy guitars from those brands which focus on beginner guitars. So you can buy a Taylor entry level guitar or guitar from brands like Yamaha. Yamaha FG series are great for beginners because of the decent sound and affordable price.
Lastly, we have the M-100FM. This guitar features a body that is similar that Super Strat style Ibanez is known for, packed with a great set of pickups. This is a mid range guitar, but one that is very capable compared to its immediate competition. If you need an axe that looks good and plays good as well, ESP LTD M Series M-100FM is the ESP for you.

While I have been able to find ways to get it to work for me most of the time, I have found that the controls for the video looping feature are not as precise as I would like them to be. There is definitely room for improvement. Another thing that I am missing is the option to control the speed of the video playback. Some competitors allow for the video playback to be slowed down or sped up while retaining the correct pitch. Guitar Tricks have been listening – Improvement have been made!This is a great help if you want to practice to play along at a slightly slower speed or if you want to review something in more detail. Luckily I have found a little helper too that allows me to control the speed of the video until Guitar Tricks are including this feature into their video player. I am using the MySpeed tool from Enounce. They advertise it to speed up videos to save time watching them. It also works a treat slowing videos down.
2. You have me to help you out! I’ve sorted through a bunch of the top acoustic-electric guitars and come up with a list of what I think are five of the best acoustic-electric guitars under $1000. I’ve been playing for almost 30 years, so I know a little bit about guitars. But just in case you don’t believe me, check around for yourself. Every one of these instruments is highly rated and top quality.
Warwick Electronics manufactured the first wah-wah pedal,[citation needed] The Clyde McCoy, in 1967 and that same year Jim Morris of Kelsey-Morris Sound developed the first octave effect, which Jimi Hendrix named "Octavio". In 1968, Univox began marketing Shin-ei's Uni-Vibe pedal, an effect designed by noted audio engineer Fumio Mieda that mimicked the odd phase shift and chorus effects of the Leslie rotating speakers used in Hammond organs. The pedals soon became favorite effects of guitarists Jimi Hendrix and Robin Trower. Upon first hearing the Octavia, Hendrix allegedly rushed back to the studio and immediately used it to record the guitar solos on "Purple Haze" and "Fire".[43] In 1976, Roland subsidiary Boss Corporation released the CE-1 Chorus Ensemble, the first chorus pedal, created by taking a chorus circuit from an amplifier and putting it into a stompbox.[44] By the mid-1970s a variety of solid-state effects pedals including flangers, chorus pedals, ring modulators and phase shifters were available.[45][46]
ACTION: fret low E at first fret and measure the distance from the bottom of the to the top of the 15th fret. It should be 5/64". Do the same with the high E, measurement should be 3/64". Now measure the string height at the nut; underside of the string to the top of the fret. Low E and A should measure 2/64", D and G =1.5/64" and B and high E = 1/64". If string height at nut is correct, recheck string height at 12th fret with strings open. Measurement for low and high E's should be the same as measurement taken at the 15th.
Went here for the first time yesterday to get the strings replaced on my acoustic guitar. Kevin, the owner, completely encompasses the definition of true customer service. He not only was professional, courteous and friendly but also willing to talk me through the process as he was re-stringing my guitar when I asked if I could watch and learn. I highly encourage coming here, especially for a an excellent and personal experience! I will be back no doubt!
Schecter is a really great guitar brand. When I was looking for my electric I searched through many guitar brands most of which are on this list and the only one that really felt right in my hands was the Schecter I play. Its got awesome tone quality, gorgeous body design and fret inlay along with very nice balance and it will stay relatively in tune for up to a few days at a time without the pegs slipping. Great for metal and rock and even really lots of other genres as well. Performs very well it should be at least top 5 if not top 3.
Quirks? Some. The old Rola was kind of tired, so I saved it and put in a new Jensen Mod I had laying around (not a bad little speaker, but not a vintage Jensen, either…expect a future upgrade). The 7F7’s are supposed to be very loud and micro-phonic (which was why we don’t tend to see them in guitar amps after the mid-late 40’s), but this one sounds just fine. And they’re cheap, so it’s not like you’re hunting down good EL86’s or anything. Also, one thing that took some getting used to was the tone knob is backwards by contemporary standards. That is, turn the creamy chickenhead to the left, you get more treble (and more drive and volume). Turn to the right, and it gets very bassy and like a chewy jazzy tone.
Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Pearl - Dot - # of Strings: 6 - Bridge: Double Locking - Cutaway: Double - Hardware: Black, 5-Way Switch - Pickups: Alnico Humbucker - String Instrument Finish: Pearl White, Pearl Black
So much has changed since our last refresh – where do we begin! First we answered some common questions that you might have. Then we reviewed our top ten chart and individual categories, and removed several older models including the Gibson Les Paul Faded T 2017, Epiphone’s G-310 SG, and the ESP MH-50. We added many others including one of the greatest guitars ever made, the Ernie Ball Music Man John Petrucci Majesty Monarchy, the premium Fender Eric Clapton Stratocaster, the Yamaha RevStar RS420 and Mark Holcomb’s signature PRS MHHB2 SE.
{ "thumbImageID": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "defaultDisplayName": "Epiphone Tom Delonge Signature ES-333 Semi-Hollow Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Stripe", "sku": "sku:site51273888006950", "price": "599.00", "regularPrice": "599.00", "msrpPrice": "999.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe-1273888006950.gc", "skuImageId": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000-00-60x60.jpg", "imgAlt": "" } ] }
Three acoustic guitars were offered in 1971. These were glued-neck models with roughly Martin-shaped heads and pickguards slightly larger and squarer than a Martin. All had spruce tops (presumably plywood), mahogany bodies and necks, rosewood fingerboards and dot inlays. These appear to be Japanese, not Brazilian Gianninis. The bridges are glued on, with screw-adjustable saddles and pins. The U3012 Auditorium was a Spanish-shaped steel-string and cost $89.50 plus the cost of a case. The U3013 Grand Auditorium was a dreadnought costing $105. The U3014 Twelve String cost $120.
One oil finish that many luthiers use and recommend is Tru-Oil, which was originally formulated for finishing gun stocks. It is the oil finish that Luthier's Mercantile carries, and if you Google for Tru-Oil you will find plentry of information about using it on guitars including some very good instructions. And those instructions will help you with Danish Oil as well.
Fender has a long history of building amplifiers, so much so that many of the amps we see today still mimic the look and aesthetics of the amps that they built many decades ago. You could also say that many of the amps we have today can trace their roots to the classic Fender amp design. Also impressive is the long list of Fender amplifier users which include Eric Clapton, Jerry Garcia, Brian Setzer, Neil Young, Stevie Ray Vaughn, Eddie Van Halen and many more. For a company with a long legacy and a massive line up of amplifiers, maintaining high rating across the board is quite the feat, but then again, this is to be expected from the company that helped shape the electric guitar sound that we know today. These days, Fender is well represented in the entire amplifier market, from entry level models with amp modeling, to premium modern reproductions of their iconic tube amps.
The process for recording sound from a guitar amp might seem simple; you have your amp and a mic to capture it, stick mic in front of amp, press “record,” and play. Done! The truth is, though, that even when using the same guitar and amp with the same settings captured by the same mic, the results can vary greatly depending on where you place that mic. Add the variables of different mics and multiple mic placements on one speaker cab, and your sonic possibilities expand exponentially. The elephant lumbering into the room at this point in the game is the fact that more and more people are recording direct to interface using digital amp simulators, or DI’ing and applying an amp plug-in in the digital-audio workstation (DAW). These facilities have improved tremendously in recent years, but the majority of professional guitarists and professional studios still mic actual amps to record the most dynamic guitar-based music being made today, so we’ll stick with honing these old-school skills.
I have owned a lot of amps over the years. I am also a dealer in music accessories. Please note that we do not sell these amps, so I am not endorsing and using something my shop sells. I recently have bought a couple of amps in a series (I bought one first and then bought another) and have been really impressed. The Vox AV series. http://www.voxamps.com/AVSeries
Matthias Karl Hohner, son of Dipl.-Ing. Matthias Hohner and a direct descendant in fourth generation and name bearer of the founder Matthias Hohner, was one of the last members of the Hohner dynasty involved in managing the family business, between 1968 and 1986. His son Matthias Francisco Hohner belonged to the first generation of direct descendants who did not enter into the family business. Many direct descendants of the founder are still active as members of the "Deutsches Harmonika Museum" and the "Hohner'sche Familienverein".

The “best” here is subjective. Again, what is best for me may not be best for me might not be best for you and vice versa. In general here are my recommendations for buying a guitar from the best brand of electric guitars for beginners at every level. There are several brands available in the market that claim to offer the best quality electric guitars for the beginners and for the seasoned guitarists as well. But some of them are really up to the mark if you are looking for the best guitar, you can go with them certainly. 

Accompanying the Supro frying pan in the ’36 Peate catalog was the Supro amplifier. This had a small, rectangular cabinet with a round grillplate with the screws attaching the speaker showing around the edges. The grille cover was still similar to a resonator cover, with large diamond cutouts, backed with cloth, and finished with black wrinkle paint. A leather handle sat on top, and metal bumper guards graced the lower corners. No information is available regarding specs.
It’s now time for the most challenging step: fitting everything back into the guitar. Don’t worry: if you did everything correctly up to this point, you shouldn’t have any problems getting it back together. You’ll be using extra wire to pull the electronic parts through the F hole and into their mounting holes on the body. It’s best to start with the component that’s furthest from the F hole, which is usually the jack.
Wow, didn't expect a budget-priced instrument to perform this beautifully! I had planned to use this as an introduction into nylon-string (from electric), then upgrade to a better (i.e. more expensive??) model. That won't be necessary! The NTX700C is absolutely perfect for me and will remain the nylon-string guitar in my stable. I am a professional solo jazz guitarist and ventured into a nylon-string for my Brazilian jazz set. Being an electric player, the transition with this model has been much easier than a traditional classical. The onboard electronics are great with my Bose L1 system. I have the cedar top, and the tone is very mellow, and already opening up with only three weeks of playing.
This guitar sounds tighter and is less loud than a dreadnought. But its construction warms its tone considerably. Its owners say that its tone is well balanced – clear and punchy but still warm. It offers clarity in the higher registers, but some boom in the lower registers. For that reason, the LL16 is suited to almost any style of playing. It will not, however, be as punchy as the Taylor 210 or as round sounding as the Blueridge.
Most overdrive/distortion pedals can be used in two ways: a pedal can be used as a "boost" with an already overdriven amplifier to drive it further into saturation and "color" the tone, or it can be used with a completely clean amplifier to generate the whole overdrive/distortion effect. With care - and with appropriately chosen pedals - it is possible to "stack" multiple overdrive/distortion pedals together, allowing one pedal to act as a 'boost' for another.[44]

I'm trying to determine the worth of a korean made fender telecaster. Solid ash,butterscotch blonde,maple neck,abalone inlays,seymour duncan pick-up(the other 1 is silver?)classic bridge.It's probably about 5 or 6 years old,it seems nicer than any mexican I've seen. Serial # 04041144 I paid $500 and I want to sell but don't want to be unfair to self or buyer.Help please-QUICK.

You've come to the right place.  We offer a wide range of vintage and used guitars and basses including a great selection of Fender instruments.   We're guitar players who recognize and appreciate how important Fender has been to the evolution of Rock and Roll.  Please browse our web site, give us a call or visit our Chicago show room.  We're constantly searching for Fender guitars, new gear is arriving daily and they often sells before we have a chance to list them on our web site.  


Combining Reverbs: You don't have to generate all of the reverb sound from a single plug-in, and using two different reverbs can also help you to save CPU power. For example, though a nice convolution reverb gives a good, believable sound, long impulse responses tend to eat up CPU. By using the convolution reverb for the early reflections, and then using something like Logic 's Platinumverb or Waves Trueverb to add the reverb tail — which is less critical to our perception of the sound — you should get a convincing but less processor-intensive result. Matt Houghton
Pre-owned, in good condition. Fully tested and works perfectly. Cosmetic blemishes in the form of dings, scuffs, scratches, and discoloration. Supersonic foot switch is a bit dusty (not shown in photos because I hit the photo limit). Spring reverb works well. Tubes work, but could probably stand to be replaced. The Vintage channel contains pre-gain tone controls and 2 switchable voices. The guitar amp’s Burn channel contains dual gain controls and post-gain EQ, allowing tonal experimentation. The Fender Super-Sonic 60 combo also features the long-spring Reverb by Accutronics; Ivory “radio” knobs; and a 3-button footswitch.

You can use similar two-mic techniques, minus the effects, on a single amp to capture a variety of larger-than-life guitar sounds. One trick that I stumbled upon involves miking a twin-speaker amp with two mics that are close in response, but not matched (see Fig. 1). The first time I tried this, on a session with guitarist Paris Slim, I used an Electro-Voice RE20 and a Sennheiser 441.

Sorry on my previous post - I meant to add that the waveform test should be done using guitars of same distance between bridge and nut so the vibrating string length is identical, and of course using identical pickups. You can then vary the woods, the hardware, the body type (hollow, semi, solid) etc. I think it would be interesting to use guitars with different overall string lengths depending on the stop piece used, whether the strings or through the body, and the arrangement of the tuners on the headstock.


I have been using it since 3 years. It is not even costly. Its good looking and I think its even better than gibson. It even very easy to tune for it has a very good sound quality. More over it has a beautiful look like a guitar. Even a beginner should be advised to buy this guitar for it cost a minimum of 3000 rs. So as it is less costly and more quality it's the best for me. I even like lakewood but its cost is just my dream.

For notation and composition work, some of the common choices are Avid Sibelius 7, Makemusic Finale and PG Music Band-in-a-Box. Or, for DJ-ing and remixing, check out the Native Instruments Traktor series, Avid Torq or the software packages from Venue Magic. There truly are dozens of options available for you to take advantage of the benefits digital editing has to offer. Whether you're an independent artist mixing tracks on your own laptop or a professional sound editor working on a major TV series or indie film, the right music software is here to handle your needs.
So, here’s the deal: the M5 is NOT an amplifier modeler (no Marshall or Vox recreations here), nor is it meant to replace your entire pedalboard. This is ONLY an effect modeling pedal, and contains over 100 effects, of which you can have active one at a time. In terms of “extras” it has a tuner and tap tempo. The Line 6 M5 is a perfect first pedal to buy, since with 100+ built-in effects you can play with all of them and find out what types of effects you really like. It’s also a perfect pedal to simply just have on your pedalboard, for situations where you need a certain effect and don’t have a pedal for it. Need a reverb in a pinch? It’s a reverb. Need a compressor? You got it. Need a phaser? Yep, it’s that too. It’s also really inexpensive for what it is, making it a great starting point that you can build upon.
The Fender T-Bucket 300 is a cutaway dreadnought guitar that comes with a stylish design and an incorporated pickup system for easy amplification. This instrument comes with a laminated maple top that features a Trans Cherry Burst finish. With quarter-sawn scalloped X-bracing, this guitar offers superior resonance and playability even as time goes by.

String Tension: Acoustic guitars must be built stronger, because the tension of the metal strings is approximately twice that of nylon. This is done with bracing. Any acoustic guitar top must be thin enough to resonate, but so thin that the top alone could not hold it together against the string tension. The bracing adds strength with a goal of minimal damping of resonance. Bracing patterns vary widely, but most Spanish guitars use "fan bracing" and most acoustics use "X bracing."
Turning our attention to the main controls on the front, it actually doesn’t look as intimidating to use as some owners of it make it out to be. Yes, you can get lost in tweaking and tinkering with amp models and effects until you’re blue in the face - but we actually find the interface to be nice and uncluttered, with all the footswitches and knobs nicely spaced out. On the top left there’s a small screen with some knobs surrounding it, and this is where the majority of your tweaking and editing will take place. Across the top are seven knobs which are meant to replicate what you would find on your amp. If you’re interested in the amp modeling part of the POD HD500X, you’ll appreciate having things like DRIVE, BASS, and PRESENCE immediately available. Two footswitches on the far left of the unit are responsible for up/down menu navigation, eight switches labeled FS1 to FS8 are assignable to individual effects, and finally there are two switches dedicated to the Looper function, and Tap Tempo/Tuner. You can also clearly see an expression pedal built-in on the right of the unit.
Just as it’s important that the guitar, amp and effects are performing to spec, make sure that all cables are functioning properly (it’s uncanny how many times a lead that was working fine yesterday suddenly develops a fault just before a take). It’s a good idea to ensure that spares are available. That goes for strings, too – valuable recording time can be lost just because a string has broken and no one has a spare. Some engineers will try to insist you use brand new strings when recording, but don’t be bullied into it if you prefer the warmer sound of a played-in set; that applies especially to bass, as new bass strings can introduce undesirable harmonic content into the sound.
The initial single-pickup production model appeared in 1950, and was called the Esquire. Fewer than fifty guitars were originally produced under that name, and most were replaced under warranty because of early manufacturing problems. In particular, the Esquire necks had notruss rod and many were replaced due to bent necks. Later in 1950, this single-pickup model was discontinued, and a two-pickup model was renamed the Broadcaster. From this point onwards all Fender necks incorporated truss rods. The Gretsch company, itself a manufacturer of hollowbody electric guitars (and now owned by Fender), claimed that “Broadcaster” violated the trademark for its Broadkaster line of drums, and as a newcomer to the industry, Fender decided to bend and changed the name to Telecaster, after the newly popular medium of television. (The guitars manufactured in the interim bore no name, and are now popularly called ‘Nocasters.’) The Esquire was reintroduced as a one-pickup Telecaster, at a lower price.
The guitar offers a beginner some great features in sound and playability. For starters, it is technically a Les Paul (giving you a great “cool factor,” which is important when you’re first starting out). It cuts a couple corners that a Standard or Special Les Paul won’t, like the fact that it’s a bolt-on neck, and there are proprietary single coil pickups (as opposed to the standard humbuckers you’ll usually find in a Les Paul).

For instance, the guitars that have a solid body are the most numerous out there. These models are as sturdy as they come, but they do not offer one plenty of resonance and sustainability. If you are interested in a design that mimics the figure of acoustic units, then you should pay attention to those guitars that have a hollow body. These products are able to deliver plenty of resonance, but they might not be of great help when it comes to feedback.
Price guides can be used by both sellers and buyers. Sellers can generally use websites to get a ballpark figure on the value of their model of guitar or bass. They can then deduct for dings, scratches, and other injuries the guitar may have sustained in its lifetime. After-market modifications, such as new pickups or repair work, can increase the value of the guitar.

Recently I was in the market for a low watt 1x12 amp. My local music store had a good selection. I grouped an old Vox AC15, Fender Deluxe, Orange, and a PV around me. I used a PRS Custom 22 to try them out. After about an hour I decided on the Fender. The sales guy suggested I try one more amp. It was an Egater Rebel 20 head with an Egnater 1x12 cab. My reaction was instant! If you have not played one of these you owe it to yourself to check them out! I bought it and also a Rebel 30 1x12 Combo a few weeks later! They SING!

Other handheld guitar and bass resonators on the market, manufactured under the tradename SRG, produced by Aescher Europa, in Germany, are available in both monophonic (one note at a time) and polyphonic (multiple notes at once) models, which include multiple onboard trigger switch effects, such as HPF (high pass filter) for enhancing harmonics and producing feedback effects, and LPF (low pass filter), producing a bass boost with a cello sound on heavy gauge strings. Later EBow models, such as the plus Ebow, contain a mode slide switch on the back, which allows the player to either produce just sustain or overtone feedback in addition to sustain.[69]
I thought I'd give a review from the point of view of someone completely new to the guitar, for those of you out there like me who are wondering if this will really teach you or if it'll be a frustrating waste of money. First off, I'll say that it isn't easy. As someone completely unfamiliar with the frets and the strings, I had a tough time starting out - very slow and clumsy. BUT, you'll see improvement REALLY quickly. I've only been playing for about two hours and although I still suck, I'm having a great time and I'm already loads better than I was when I started out. The only reason I stopped was because my finger got sore from holding down the strings. So far, for someone who's wanted to learn and either never had the time or money to take lessons, or found practice to be tedious and dropped it, or just doesn't have a mind for reading music, this is a definite recommendation. If anything changes as I get further along, I'll update this review. But as of now, I love it!
John Mayer and Frusciante are very talented guitarists, but to include them at the expense of legends like Clapton, Duane Allman, Neil Young, The Edge, Brian May, George Harrison…that's unforgivable. I'll admit that Jack White needs more time to prove himself too, but of all the recent guitarists listed, he is the one with the most vision and confidence in his ideas. He is his generation's Jimmy Page.
An electric guitar is an expensive toy, so deciding who to buy it for is very important. Depending on the electric guitar’s purpose, its size and sound have to align with the player’s taste and goals. Profciency is also another deciding factor. If you are a beginner electric guitar player, the most important things to keep in mind is how easily you can play the electric guitar. What type of body style is suitable? What types of tones suits your tastes? These are the types of questions anyone should ask themselves when deciding who to buy an electric guitar for.
The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.
I’ve never played a gig without an amp, but I am prepared to… Instead of spending a ton of money on AXE FX (which a good amp can be a small fraction of the cost of AXE FX, especially if you still need to buy monitors, power amp, etc…), I keep a Line6 Sonic Port in my bag I can use with my iPod, iPad, or iPhone. Cheaper than AXE-FX. I do use the Line6 Sonic Port into my iPad for recording tracks for different projects. A lot less than AXE-FX and easier to use. Another option.
What worries Gruhn is not simply that profits are down. That happens in business. He’s concerned by the “why” behind the sales decline. When he opened his store 46 years ago, everyone wanted to be a guitar god, inspired by the men who roamed the concert stage, including Clapton, Jeff Beck, Jimi Hendrix, Carlos Santana and Jimmy Page. Now those boomers are retiring, downsizing and adjusting to fixed incomes. They’re looking to shed, not add to, their collections, and the younger generation isn’t stepping in to replace them.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1377.76, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodH91419, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=799.99, priceVisibility=1, listPrice=999.99, usedCount=3, salePrice=999.99, isOnSale=false, showMSRP=true}

The main thing to keep in mind regarding vintage guitars: A guitar is worth what somebody will pay for it. There aren’t necessarily rational reasons behind the value of a particular model. Rarity is only really relevant if the guitar in question is part of a group of guitars that are lusted after by many collectors, and many of those collectors are also considering investment potential, so those guitars will never be played and may end up in museums in Europe or Asia. In other words, Rarity means nothing without demand. A rare crappy guitar is still a crappy guitar and if nobody wants it, it’s just firewood. Condition counts for more.
While it might look identical to the RevStar RS420, Yamaha Revstar RS320 is very different. The shape is the same, along with the most of the hardware. However, the tone is a whole different story. While RS420 comes with vintage humbuckers, the RS320 packs a set of extremely hot pups which are more modern. I personally liked this configuration more than the vintage one, simply because it offers extended versatility.
Some more advanced models, like the Wampler Latitude Tremolo Deluxe, bring a much more complex set of features, which include choosing the waveform and more. Whether you are looking for a good way to spice up your tone without impacting the nature of your signal, or you are just in need of a great vintage style effect, tremolo is the one to go for.
Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]
SOLD OUT : A real find this one is... not your average vintage Takamine you will soon see its also in amazing original superior condition .. this premium example was hand built by the finest Japanese Luthiers at Takamine Gakki. This prime example is the finest Exotic Brazilian Rosewood we have had in yet and we have had some duzies for sure this true Law Suit era Takamine F375S acoustic guitars we have ever had! wow.. and exact copy of the Genius original Martin design of the D-28 exotic....WoW.. the frets look almost new, Martin bone nut and saddle the "s" stands for solid construction and the Solid Sitka Spruce top is super nice amber with age now over the past 37 years and taken care of this California native guitar exhibits its premium exotic woods very proudly just have a look all round everywhere you look...from the amazing Brazilian rosewood sides & the back is A Gorgeous 3-piece back with intricate inlay work to the premium solid mahogany neck..fit & finish is simply put gorgeous. The neck is nice & straight with a perfect Martin like medium V profile 1-11/16ths @ the nut - the action is very good 3-16th @ 12th fret you can adjust either way to taiste no problem and with the bone nut and saddle this guitar has wonderful tone right up there with the Martin or Yairi this guitar is AAA professional grade vintage and is in 100% condition it is not new or mint with minimal dings its condition is JVG Rated as 9.5 / 10 - excellent vintage = beautiful and exotic... please see the pictures for the cosmetics..these Takamine are built as good or better than the Martin it copies the back is quad braced and the reinforced crossbracing of the top should make this finely built instrument last several lifetimes.. Your looking at the best of the best in Japanese vintage exotic & solid construction in astoundingly nice condition...you simply must play and hear this guitar we love it and so will you.. I can't amagain a cleaner example of this vintage you will not be sorry... exotic Brazilian Rosewood tone woods are the best of the best. No need to spend $3000 or even $5000 or more for such an exotic vintage 40 + year old Martin d28....Find it here Email: gr8bids@comcast.net ..
well it does not effect the strings electronically. however. each pickup depending on its position on the guitar is designed to pick up a specific range of tones. the pickup closes to the neck is meant to pick up the bass range whereas the one closest to the bridge is meant to pick up the treble(higher) end of the tonal spectrum. all that aside when you actually move the switch it might have a reverberation throughout your guitar because the switch is just really hard or stiff. it might need to be broken in no worries there.
Great website and very informative on readers experiences with Martin guitars. My 1995 Martin HD 35 has been nothing but a problem child since purchased new. The truss rod is frozen and the low e is fully 4/32 above the fret board at the 12th fret..nearly impossible to play fingerstyle. I bought a pak of new bone saddle material from the Martin 1833 shop and lowered it to playable height by making a new saddle…easier to play but considerable difference in tone experienced. String angle at the bridge changed I guess the tonal quality.
While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally. (more...)
Choruses (Chori?) come in mono, stereo, and true stereo versions, and a good one will provide lots of control across the depth and speed of the modulation desired. In the case of a mono unit, the aggregate tone produced by the circuit is flattened and passed through a single jack, where as a stereo (sic) unit will pass wet and dry signals through different jacks. A true stereo chorus unit will produce a true stereo signal, where the effect is mixed properly into left and right channels.
I disagree. Through the years I've owned many amps and many pedals, and played with numerous setups to get different sounds. My absolute favorite setup and sound I have had is my Les Paul straight through my JCM900. At most, I'll add a wah in there. That is my ideal setup. I've played many different styles over the years, and used many techniques. My playing has evolved as I went along, and started taking pedals out of the mix. I think pedals are a great thing, and if you want to use them, you should.
For players who want an incredible palette of tones for a low entry cost, this is the amp for you. Experiment with 128 tonal presets, or create your own sounds with digital models of over 200 amps, cabs and effects. If you’re into playing different styles of music and you don’t want to invest in different rigs, look to this versatile solid state amp first.
Sorry Joe but I don’t really any value of this arrangement. It could work only in super bright guitars that would always need some treble bleed. It’s much better to change pot values for guitars like that, go from 500K to 250K etc. When changing pots doesn’t cut it it’s better to get rid of the pickups/guitar than to have a bleed circuit on all the time, some of the magic is always lost.
The iconic Les Paul Standard is celebrated by the world’s greatest musicians as the standard for perfection in the world of electric guitars. The new Les Paul Standard features the popular asymmetrical SlimTaper neck profile with Ultra-Modern weight relief for increased comfort and playability. Impeccable looks are highlighted by the powerful tonewood combination of mahogany back and carved maple AAA figured top. BurstBucker Pro humbuckers provide modern and classic tones, while immense tonal variety from comes from 4 push-pull knobs. Includes hardshell case.
Launch price: $1,699 / £1,006 | Body: Laminated mahogany, semi-hollow | Neck: 3-piece mahogany/maple/mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x LB-1 humbuckers | Controls: Bridge volume, bridge tone, neck volume, neck tone, 3-way selector | Hardware: Guild Tune-o-matic bridge with rosewood base, Guild vibrato, Grover Sta-Tite open-gear 14:1 tuners | Left-handed: No | Finish: Cherry Red, White, Black
Distortion and overdrive: In the early days of electronic music, vacuum tube amplifiers were used for processing the output electrical signals. Like any amplifier, these tube amplifiers had a maximum amplification above which they began to clip the peaks of the waveforms. While the resulting distortion may have disturbed the electrical engineers, a substantial fraction of the musicians liked the distorted sound and it became part of the musical medium.
If you’re looking for an acoustic-electric guitar that sounds great but comes at an affordable price, then you can’t go wrong with the Oscar Schmidt OD312CE. This guitar features 12 strings for a depth and richness you couldn’t achieve with a 6-string guitar. The sound of the strings is further amplified by the select spruce top for a ‘woody’ warm tone.

Johnny Marr is a chief architect of the post-modern rock-guitar aesthetic. As the guitarist for seminal Eighties poetic pop stars the Smiths, he created a tonal palette and crisp stylistic approach that still forms the roadmap for much modern rock guitar playing. It was Marr who created the orchestral guitar soundscapes that enhanced the moody drama of Smiths singer Morrissey’s introspective lyrics and ironically detached vocals.

Effects can inspire you with new creative ideas, or just help you sound like your musical inspirations, go for it. I would urge you to consider a multi-effects unit like a Digitech RP series, or Line6 PodHD series. They can provide you with many options to try before you figure out exactly what you want. Many units can be had pretty cheap used, and as a bonus, most will act as a usb interface, and let you record your playing (for better or worse) to computer. – Michael Cook Apr 29 '13 at 21:39
While it’s not the most refined thing out there, Jackson Pro Series SL2 is definitely a force to be reckoned with. Minimalist design combined with bulletproof components is the type of recipe you want if you’re looking for a solid guitar. Playable, with great tone, this Jackson definitely spiked my interest in the brand again. Best of all, it’s reasonably priced considering what it offers.

Repair body wings. These wings form the main body shape and may have been broken by dropping the guitar or other damaging methods. If you do not properly glue in the wings you will need to use extra caution as to not break the bond. Repairing wings or any body wood is rarely necessary, especially on a thick guitar body such as a Les Paul Standard. It may be needed on a smaller bodied guitar much like a Les Paul Junior.
{"id": "H91419", "skuOrProductId": "H91419000001000", "categoryId":"site1AAH", "name":"Artstar AS153 Semi-Hollow Electric Guitar", "pageUrl":"/guitars/ibanez-artstar-as153-semi-hollow-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Artstar-AS153-Semi-Hollow-Electric-Guitar-Antique-Yellow-Sunburst/H91419000001000-00-120x120.jpg", "addToCartUrl":"/guitars/ibanez-artstar-as153-semi-hollow-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place between "jazz-clean" all the way to "blues dirty." If you're aiming high, Ibanez has an ARTSTAR for you.", "value":"799.99", "priceMin":"799.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"27", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"22", "usedOrNew":"used", "discontinued":"0", "onOrder":"1", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1HBA,site1LFMIC,site1LAAA", "stickerText": "Top Rated", "checksum":"637145126000", "priceVisibility": "1"}
Samick is a Korean guitar manufacturing company, that is known first for constructing their pianos using imported pieces. The corporation is capable of manufacturing more than one million guitars each year. They have an acoustic guitar with good quality which makes an exceptional sound. The company sell its guitars under its own brands such as Abilene, Silvertone, Greg Bennett, and Samick.
The late 60s and 70s produced even more bizarre and berserk creations. The birth of Mayfield and Mullen’s VOX King Wah pedal sealed its place in guitar history during overbearingly long, Clapton-esque guitar solos. The 1978 Pro Co RAT, whose design was a re-imagining of the Arbiter Fuzz Face, arose partly from error: A botched resistor band created a harsher, clipped audio waveform. Its use has supported nearly all “alternative” rock genres in the last 30 years: 80s punk, American indie rock, Grunge (the RAT played a crucial part in Cobain’s quiet-loud-quiet-loud composition), not to mention Britpop and grindcore.

My services include re-frets, fret dressing, fret end dressing, action adjustment, truss rod adjustment, intonation setting, nut replacement, bridge saddle replacement, acoustic pickup installation, electric pickup fitting/replacement, output jack replacement, pot replacement, re-wiring, sound post setting, tuner installation, brace re-gluing, broken headstock repairs, strap pin installation, re-strings, bridge setting, tremolo setting, Floyd Rose setting, custom scratch plate cutting, tuning problems, restoration, polishing, cleaning, wiring modifications...Get in touch I'm sure I can help!


At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.

Body Body shape: Double cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Swamp Ash body on translucent and burst finishes, Basswood on solid finishes Body finish: Gloss Orientation: Right handed Neck Neck shape: C medium Neck wood: Hard-rock Maple Joint: Bolt-on Scale length: 25.5 in. Truss rod: Standard Neck finish: Gloss Fretboard Material: Rosewoo


{ "name": "Vintage Sunburst", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Vintage-Sunburst-1500000014892.gc", "status": "backorderable", "statusText": "Back Order", "skuItemType": "New", "inventoryText": "Available 11-20-2018", "inventoryKey": "available_date", "availableDate": "11-20-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014892", "shipToStore": false, "displaySku": "J40301000004000", "displayId": "1500000014892   POS #: 112318357", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000004000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-27-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Vintage-Sunburst/J40301000004000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Vintage Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
Epiphone's Les Paul series were originally designed to allow the budget crowd to experience this awesome guitar without investing thousands of dollars. That's something that hasn't changed to this day. The Epiphone Special II is among the most basic Les Paul designs on offer, making it perfect for beginners. We've chosen this particular guitar because of its neutral configuration which will keep up with you even after you've built plenty of skill.
There are a couple of tricks you can try. One is to get an allen key wrench that is SLIGHTLY too large and take a small file to it to taper all six sides slightly. The other trick, which I use sometimes on Stratocaster saddle height screws, is to use a suitably-sized Torx wrench. They're already tapered, and since they're six-sided-star shaped, they grip the corners really well, even if there's a bit of crud stuck in the screw.
Another popular method for keeping that signal strength is by way of a booster pedal which pretty much gives your signal a dose of added voltage in order to avoid degradation. Booster pedals become increasingly necessary when working with a signal chain involving a good number of pedals in order to keep that signal strong by the time it hits the amp, but depending on whether you just want to boost the overall signal strength or the strength of a certain effect, placement becomes important.
A diagram showing a wiring modification for a Les Paul or a similar electric guitar with two humbuckers. Wiring schemes using four push-pull pots for additional pickup combinations were made popular by Led Zeppelin guitarist Jimmy Page and later produced as a signature model by Gibson. The modification shown in this diagram is an evolution of the original concept combining coil splitting, phase cancellation and parallel/series switching for a total of 22 different pickup combinations.
• How wear alters playability: Fret wear – grooves worn in the frets from pressing down on the strings, depressions created by bending, lowered overall fret height from usage – can all cause buzzing noises to occur at points where frets are located along the neck. Luckily, these problems can typically be addressed by having the frets leveled and dressed several times before a fret replacement job is necessary, since fret replacements are costly.
Fishing some thin wires through the jack holes from outside can work. I use stranded wire and strip the insulation from the end. I’ll divide the strands and wrap them around the pot shaft. It’s a delicate balance — you want enough ‘wrapping’ to grip the pot for pulling, but not enough to get in the way of getting the pot shaft through the mounting hole.
At first this may seem trivial, but a little experimentation reveals that each effect reacts very differently depending on how the original signal has been altered by previous effects in the signal chain. Initially, this can seem rather frustrating; a pedal that sounds awesome on its own can turn your sound into a real mess when combined thoughtlessly with other effects. I’m going to go into the basics of signal flow and cover the fundamentals of setting up a great sounding pedal board. As you would expect, there isn’t any one “correct” way of doing things. You may find that changing the order gives you a completely unique sound, and that’s great. However, if you’re sorting it all out for the first time, this is a good way to start ordering your pedalboard.
If you want to invest in a guitar that replicates the famous ’70 guitars, look no further than the model offered by Fender Vintage. This product was designed to feature a basswood body that is a replica of the famous workhorse Fender guitars. Moreover, the device has a “C” shape neck that was constructed from maple, and that is said to be quite resistant.
Dyna Gakki began production in 1972 in the city of Nagano, Japan. They manufactured guitars for Fender Japan and Greco, so they couldn't have been a terrible manufacturer as Fender is very choosy about outsourcing their product. Dyna may have been a source for Japanese manufacturer Yamaki. Dyna also produced the infamous Ibanez badges for a short period of time.
Welcome to Silesia Guitars, the guitar repair shop in Shoreline that is dedicated to taking good care of your dear friend, the guitar. We are located in Shoreline, just 15 min north of downtown Seattle. Our work consists of repairs of anything from broken headstocks and  cracked guitar tops, through replacing/installing electronics and custom inlays. Just need a set up or a string change? No problem! We try to accommodate any needs, big or small. Usually, the cheaper the guitar, the more it would benefit from being professionally set up. Evaluations are free, so stop by with your guitar today and let's talk about how we can help you get the most out of it!
To answer your question directly, yes, but only from a strictly physical point of view. According to guitar enthusiasts, electric units are easier to handle than their counterparts. The main motif for this has to do with the fact that the acoustic models come equipped with what many describe as heavier gauge strings. Because of this feature, their strings are more difficult to pick and press down.
Phase Three began in 1974, bringing some of the biggest changes to the series with it. Univox swapped in its own humbuckers, made unique in part due to their visible white bobbins. This change took the Phase Three Hi-Flier solidly out of the realm of Mosrite Ventures copy territory and into its own realm, considering the tone and high output changed the sound so significantly. The presence of these humbuckers – found on other Univox guitars of the same era – make the Phase Three versions some of the most highly sought after Hi-Fliers.
you put in a lot of work, its not biblical correct, pretty good...but take with a grain of salt. but some guitars are made in Korea. I bought a Yamaha 3 piece back like a Kiso Suzuki, I would it was made in Japan The tuners said made Japan. I thought the pawn shop was crazy. I got it for $100 Love this guitar and then one day I looked at the the decal in the sound hole and in the tiniest print "Made in Korea" I felt a pang like o' crap I bought a Korean guitar. But I have a few Acoustics High end a Guild made in the 80's and this Yamaha is incredible. better or just as good as my old Suzuki
By 1964, most of Orbison’s early rock and roll contemporaries were either dead, strung-out on drugs, in jail or making crappy movies, but Orbison’s musical career still hadn’t reached its peak. In between the ballads, he recorded singles like “Mean Woman Blues” (check his wild guitar solo) and “Oh, Pretty Woman” that showed upstarts like the Beatles, the Animals and the Rolling Stones that Americans still could rock harder than any Brit.
Epiphone zenith guitar from the early 1960's,made from the 1931-1969,,16-3/8" body,oval pearl inlays,sunburst in color,single wide binding top & back.this guitar has a deep scratch on the top but not thru the wood,a couple extra holes in the top body on each side of the frettboard were it looked like an extra pickguard was,lots of finish crazing on the back of neck.this guitar has a new set of strings and plays and sounds great with nice action.
The guitar measures 41 inches in length, and it comes with a 25.75-inch scale and 20 frets for various playing techniques. You also get strong D’Addario strings for reliable performances every time, as well as enclosed die-cast gold tuners, so you never play an off note. This dreadnought guitar features a cutaway so you can easily practice finger techniques on the higher frets.

Starting from the body, we see the standard Les Paul shape. The tonewood of choice is mahogany, as expected, but this time it comes with a maple top. The top of the guitar arches slightly just like the original Les Paul does. In terms of details, we see a white binding around the top section that really stands out on the dark matte finish.  It's something to behold.

Likewise, six Folk/Country Western guitars were offered, with flat, corner-notched heads, belly pin bridges and tortoise pickguards. The 14″ GS240 Concert ($79.50) was a Spanish shape with natural spruce top, mahogany body, and dot inlays, presumably on a rosewood fingerboard. The 15″ GS350 Grand Concert ($99.50) was another Spanish with natural spruce and figured Brazilian fruitwood body, with diamond inlays and wood rope binding. The GS380 Grand Concert ($109.50) was the same as the GS350 except for a Brazilian rosewood body. The GS460 Country Western ($129.50) was a 16″ dreadnought with a spruce top in red sunburst, cherry-finished mahogany body, a black pickguard, sort of mustache bridge, diamond inlays and white binding. The 16″ GS570 Auditorium ($149.50) was another dreadnought with yellow spruce and full grained Brazilian rosewood body, diamond inlays and fancier rosette. The GS680 12-String Auditorium ($185) was another 16″ dreadnought 12-string otherwise the same as the GS570.


Sweep picking provides you with a more economical way to pick one-note-per-string or combos of one-note-per-string and two-note-per-string instances up and down the string register. Not to be confused with raking, the idea here is to fret and ring out every note clearly (no cheating!). To do this, it’s of paramount importance you approach this technique slowly and be very critical of each note’s clarity. When starting to sweep pick, start with a locked wrist and don’t be afraid the experiment with varying pick widths.
{ "name": "Cherry", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000001000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000001000", "displaySku": "J40301 000001000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Cherry/J40301000001000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Cherry", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }
Unfortunately, there is very little documentation or early catalog literature on the Kingston brand, so it is nearly impossible to date their guitars or group them into series. However, we do know that these guitars were likely built by Kawai, Teisco, and/or Guyatone (other manufacturers are possible as well). At the time, Kawai was building guitars in the style of a Fender Jazzmaster as well as the uniquely shaped Burns double-cutaway. Your guitar has more of a Strat-shaped body and I have seen it called a “Swinga,” but I wasn’t able to find another exact comparison in my research. I think your guitar was made by Kawai in the mid-to-late-1960s, because Westheimer was likely done with Teisco when this guitar was built, and it doesn’t really look like a Teisco from that era anyway.
Finally, there was a mysterious lap – clearly Valco – which had no real National or Supro equivalents. This had tapered shoulders that swept down, wing-like, to the bottom, which had a little concave cutout. It was covered in ivory plastic on top, with black-lacquered sides. It had a rosewood ‘board with dot inlays. The pickup was the new exposed-pole single-coil with a bolt-on handrest, in front of narrow rectangular plate that held the saddle and attaching holes. Volume and tone knobs sat on little mini-plates on either of the strings. Another atypical downscale version of the National New Yorker was offered at the same time by Montgomery Ward.
Being a true pro-level instrument, the Yamaha LL16 comes with a jumbo body shape and built-in S.R.T Zero impact electronics. Playability remains beginner friendly, with a low action setup that new players will easily master. And since it comes with an all-solid wood body, this guitar will only sound better and better as it ages. If you are looking for a more long term instrument at the sub $1000 level, check out the Yamaha LS16.
To create a thicker rhythm guitar sound, overdub the same part one or more times. Depending on the desired effect, the overdub can be treated as one mono signal and mixed to the same stereo position, or panned left and right for a stereo double-tracked sound. Alternatively, treat the original track with an ADT (Artificial Double Tracking) effect. This can be done with a digital delay set to around 40 milliseconds. Again, the delayed signal can be panned or mixed as one with the original guitar track.
Beautiful Teisco Electric Guitar refinished in sea foam green or Daphne blue color, it has a custom series parallel pickups toggle switch, nice low action, sweet sound, plenty of tonal possibilities. Buy with Confidence....... Blessings! Item will be well packed, shipped and insured to any of the 48 contiguous States, No Alaska, No Puerto Rico, No Hawaii, No International buyers.

1960's Kay, Model K-1 "SG-Style" Electric Guitar. 1 single coil Pickup. Great, original "see-thru" Mahogany-color finish. Bound fingerboard. Laminated maple neck and laminated Mahogany body. Volume and Tone control and adjustable truss rod. With the exception of some "Battle Scars" on lower bout of body (see photos) the finish and wood in great shape. Plays and sounds great. Stop Tailpiece. Not many finish chips. Very shiny. Frets in great shape with no visible wear. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .011 when fretted at the first and the body) and cleaning and polishing. Plays and sounds great. We also installed a new set of .009 strings.  No case included.
Potentiometers (Pots) for audio are used to adjust tone and volume. Pots are resistors with three terminals and a sliding contact (the wiper) that creates an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are most commonly used as control devices, such as volume control on audio equipment. A potentiometer for Audio applications would feature very low to no introduced noise.

Those of you familiar with Van William’s former bands Waters and Port O’Brien, will have suspicions about what to expect from the songwriter’s debut solo material: boisterous, vibrant hooks that are easy to swallow but gut you on their way back out.  His latest incarnation represents a bounce back after a period of personal tumult. Two parts power pop bombast, to one part Americana, William’s maturation as a songwriter and guitarist seems to have hit a new high water mark.
Vox had experimented with Japanese manufacturers at the end of the sixties with the Les Paul style VG2, and in 1982 all guitar production was moved to Japan, where the Standard & Custom 24 & 25 guitars and basses were built by Matsumoku, the makers of Aria guitars. These were generally regarded as the best quality guitars ever built under the Vox name. However, they were discontinued in '85 when production was moved to Korea and they were replaced by the White Shadow models, although a number of White Shadow M-Series guitars and basses are clearly marked as made in Japan, suggesting a phased production hand-over.

Headphone amps are great for playing in a moving vehicle, at the beach, in a hotel room, or in the airport lounge, and they can even output the signal to tape or disc, suitable for recording. They start at around $200 and are well worth the price if portability, privacy, and authentic tone are important for your practice routine. The Korg Pandora (shown in the following figure), Scholz Rockman, Ibanez Rock ’n’ Play, and Zoom 9000 series are just some makes and models.
Description: Body: Mahogany - Top Wood: Mahogany - Neck Attachment: Set - Neck Wood: Mahogany - Neck Construction: D-Shape - Fingerboard: Ebony - Frets: 24 - Inlay: Pearl - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Ebony - Hardware: Black, Grover Tuners - Pickups: Seymour Duncan Live Wire - Pickup Configuration: Dual - String Instrument Finish: Charcoal Burst, Vintage Burst
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.
When Electric Mud was released, it was a huge success, selling 150,000 in the first six weeks. It was also the best selling Muddy Waters record at Chess ever, entering Billboard's Top 200 Chart. It was a triumph of a record that updated his sound and put him elbow to elbow with the bands that had influenced him. The record broke down restrictions of genres with its inventiveness and ability to re-arrange songs and have them come out as something radically different. Unfortunately, narrow-minded blues purists across the board denounced it as atrocious, offensive and a big "sell out." There's a direct similarity between this and what happened to Bob Dylan a few years earlier when he decided to go electric, making his folk-purist fans angry that he was "selling out" to rock and roll. Since Muddy is primarily a blues artist, overviews of his career would be written by a number of blues historians who would automatically dismiss this record for years to come.
Taylor T5. Even the friend who bought it doesn't play it and it goes for around $2300. I was always looking for an acoustic that plays like an electric, so the T5 seemed optimal. It didn't play very well and I thought it sounded awful. Since it's got the Taylor bridge pickup in it, it sounds like a tinny can with a string until you EQ the fuck out of it. But for that kind of money, it should play and sound awesome (in my opinion), or come with indoor plumbing.
We all are now living in a great time considering the choices that we currently have. Even though it is a good thing every so often, it can actually be complicated to decide and buy the best electric guitar. If you one to have it for a serious reason, it will be realistic to own the one which comes equipped with guitar essentials like strap, carry-bag, picks, and if possible a good practice guitar amp.
Gibson guitars are usually equipped with dual-coil pickups. They have a higher output level than single-coil pickups and produce a fatter sound, which is usually an advantage for distortion, but not only! Gibson has many other successful models, like the Explorer (The Edge), the Flying V (Jimi Hendrix) or the ES-335 (B.B. King). Epiphone, founded in 1915, was bought by Gibson in 1957 and became Gibson's sub-brand, even if a few custom designs of the 1960's are still mythical (Casino).

Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!


Winner of the prestigious Music Inc. Product Excellence Award, 2017, the HeadRush Pedalboard Guitar Amp And FX Modelling Processor wholeheartedly deserves a spot on our best multi FX pedals list, thanks to the huge amount of effects within as well as its vast array of amplifier, cabinet and mic models. This is one of the best options for working musicians, yet still remains affordable.
Advanced multi-effects processors can involve significant learning curves. Their hundreds of sounds and functions may entail diving deep into multi-layered menus to get at what you want. The best units offer intuitive and ergonomic user interfaces that keep the most common functions easily accessible via dedicated knobs and switches. Reading user and pro reviews can help you identify which models offer the greatest ease of use.

Rickenbacker basses became a staple of 1970s hard rock and were featured on countless recordings of the decade (such as the first two albums by Deep Purple). These instruments were also widely used among progressive rockbassists, particularly Chris Squire of Yes and Geddy Lee of Rush, who achieved distinctive signature sounds with their Rickenbacker bass, strung with round-wound Rotosound bass strings. The “Ricks” were not as visible among the punk/new wave explosion of the late 1970s and early 1980s, with the notable exception of Kira Roessler (Black Flag). Many bass players continue to play Rickenbackers. (see “Ric” players section below)


If you have an envelope follower, envelope filter, auto-wah or other dynamic touch-sensitive effect, this should go at the very front in most cases, as these effects are almost exclusively dependent upon the dynamics of your playing. Placing most other types of effects in front of them will compress the signal, thereby reducing dynamics and minimizing their performance.
Most of the guitars, banjos and mandolins my customers use and collect have been made by major manufacturers such as Martin, Gibson and Fender or a few superb handcrafters such as D'Angelico and Stromberg, but over the years, by far the greatest number of instruments purchased in the USA and worldwide have been lower-priced student models. Prior to 1970 most student grade instruments sold in the USA were made here by companies such as Kay, Harmony and Regal in Chicago or Oscar Schmidt of Jersey City, New Jersey, and Danelectro of Neptune, New Jersey. When I started out playing and collecting guitars in the mid 1960s, brands such as Harmony, Kay, Stella, Silvertone and Danelectro were the standards for student use. We saw very few Oriental imports.
People didn’t like the Les Paul Trio at first. With a thrice-weekly performance slot on NBC’s Fred Waring’s radio program, The Chesterfield Hour, listeners often wrote in to complain about the “strange and unpleasant sound of the newfangled electric guitar Les Paul was playing”. In the late 1930s, there were many demands to fire him; today, the Les Paul guitar brand is an essential part of pop culture, and Paul himself is both in the Rock and Roll Hall of Fame and the National Inventors Hall of Fame.
A DPDT (2PDT or 2P2T) on/on switch has two channels (poles), each having three lugs. This is like having two SPDT switches in one. It’s the standard configuration for most push/ pull or push/push pots, and you can use it for almost all mods, including the seven-sound mod (if you leave one pole unconnected), coil-splitting a humbucker, out-of-phase mods (by adding some jumper wires from pole 1 to pole 2), a direct-through mod, and countless others. Let’s see what’s going on here.
Epiphone Broadway Electric Guitar Make way for the Broadway, Epiphone’s big, bold and blindingly beautiful hollow body archtop guitar. The Epiphone Broadway has been a jazz club staple since the 1930s and it continues its soulful career with new appointments. The big-bodied Broadway features a laminated maple body with a select spruce top, a hard maple neck, a rosewood fretboard and Alnico Classic Humbucker pickups.
One of the most appreciated brands on the market at the current time, the Epiphone by Gibson surely won’t let you down. The company was founded 144 years ago by Anastasios Stathopoulos and is still running today. This brand is known for producing top-notch guitars that many players love and recommend, the reason why its popularity increased over the years.
When buying your first guitar, it’s sensible to stop and think about what you are buying it for. Is it just something to learn on? Will you be upgrading in a year or two when you start thinking about forming a band, gigging, and recording? If so, you may be better off trying one of these affordable electric guitars, which all offer a solid platform on which to learn.
{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}

Description: Body: Maple - Top Wood: Spruce - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: Medium - Inlay: Acrylic & Abalone Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge Construction: Ebony - Cutaway: Single - Hardware: Gold, 2x Volume Control, 2x Tone Control - Pickups: GB Special - Pickup Configuration: H-H - String Instrument Finish: Brown Sunburst - String Instrument Accessories: Hardshell Case


Personally, I just don’t understand how you can justify calling guitars that go for 2-3x the price an “alternative”. In a list like this, you should be providing alternatives that provide superior quality, sound, and ergonomics for a SIMILAR pricetag, not a jump from $200 to $600. Also, the concept that a beginner musician will have absolutely any clue that these guitars will sound poor is almost laughable to me. A good amp will do a lot of the work, and another portion of your sound goes into technique and playing style. An actual guitar itself is less important than the amp and the player. Think of an amp as a GPU and the player as the CPU cooler: if the GPU runs fine and the CPU cooler can do its job efficiently then your CPU will manage just fine as long as it isn’t so horribly behind as to bottleneck the GPU. Also, tonewoods only affect tone in a very small way that unless you are doing a back to back comparison on a clean channel with a flat response cab is very, very difficult to notice, and once you add any crunch or dirt or even distortion it’s just out of the question altogether. If somebody has never picked up a guitar then they could hardly appreciate a Mexican Strat more than a Squire at all.
Telecasters are another guitar in Fender's lineup which include a single cutaway to get at those higher frets. These guitars feature two single coil pickups which can be used separately or with each other for producing large-scale sounds. Telecasters are well-known for producing a thin, biting sound which is common in country music, but nowadays they are popular amongst indie musicians as well. These aren't the ideal guitars for heavy metal or rock music. If you want to concentrate on country or indie music, a Telecaster can do the job for you.
From its beginnings in 1970, Mesa/Boogie was beloved for its small-but-powerful Mark series amps; in 1989, however, the company decided to take its game to a new audience. The result was the Rectifier range of bigger and beefier Dual and Triple Rectifier amps. Since then, the Dual Rectifier has become one of the most popular rock amps on the planet.

The FX8 lets you configure up to eight effects per preset, from a list of impressive effects that are modeled from classic to modern stompboxes. It also offers a more traditional work flow via Fractal Audio's "Scenes" mode, which lets you assign effects to footswitches, turning the unit into a virtual stompbox pedalboard. And since it utilizes the same algorithm as their premium processors, you can be sure that each effect model has the same sound quality. Fractal Audio is also known for their boutique like attention to detail and build quality, which is prevalent in the FX8's design. Most notably its footswitches which are designed to have no-mechanical contacts, meaning no noise and improved reliability.
Description: Body: Maple - Body Construction: Solid - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Natural
In the 1950s, several guitarists experimented with producing distortion by deliberately overdriving amplifiers. These included Goree Carter,[3] Joe Hill Louis,[4][5] Elmore James,[6] Ike Turner,[7] Willie Johnson,[8] Pat Hare,[9] Guitar Slim,[10] Chuck Berry,[11] Johnny Burnette,[8] and Link Wray.[12] In the early 1960s, surf rock guitarist Dick Dale worked closely with Fender to produce custom made amplifiers,[13] including the first 100-watt guitar amplifier.[14] He pushed the limits of electric amplification technology, helping to develop new equipment that was capable of producing "thick, clearly defined tones" at "previously undreamed-of volumes."[13]
The simplest close-miking technique using a single mic is one that’s familiar to anyone who has gigged in a venue large enough to have a full sound-support system. Stick a Shure SM57 or similar dynamic mic within an inch of the grille, and away you go. This technique frequently delivers a direct, punchy, in-your-face guitar tone that feels muscular in rock-oriented tracks. If you have a Royer R-121 ribbon mic or some other good ribbon or condenser option that can handle the sound-pressure levels involved in close-miking a guitar cab, these will offer variations on the traditional mids-forward SM57 flavor. In many circumstances this simple technique proves entirely adequate, or at least makes a good foundation to build upon, but you still need to consider exactly where to position that mic, and subtle variations of approach will reveal nuanced differences in the tones you can achieve. Also, if you’re playing a combo or extension cab with more than one speaker, listen carefully to determine which is the best-sounding speaker – or the one that’s right for the track – and mic that one (if you’re not sure, and have two appropriate mics, record two speakers to separate tracks to select from later, more of which below).
BYO takes pride in providing you with a BETTER guitar kit. We have worked with our supplier for many years, making sure we provide our customers with the highest quality products. We have our kit manufactured to our specifications and we have been providing guitar kits to builders for over a decade! We inspect each kit before we ship, checking for great neck fit, and making sure there are no problems with the body and neck. We repackage the all the hardware and electronics, putting all the correct screws with the correct parts and making sure you get ALL the parts for your kit. We don't just re-sell kits, we also have a custom shop where we make USA made guitar kits. We use this know-how to make sure our imported kits are of a higher quality and will give you a great experience and a great guitar. If by chance we miss anything, we are happy to replace, repair, exchange or refund. We have also written clear, easy to understand, step by step instructions that will make building your guitar a breeze, but if you have any questions, we are happy to answer any questions you may have along the way.
I am 60 years old. I want a guitar (acoustic). I have decided on to retrain myself towards finger pickin style. I am researching knowledge and the tonal properties of the wood / tonal qualitites. I have very small (5.1). My hands are small. Neck demensions are very important towards please let me be trained so i can determine neck width and shape for my guitar
Figuring they know what they want in an amp far better than I do, I gave our panelists no instructions, other than to keep in mind that these amps were primarily for beginners and secondarily for more experienced players looking for a cheap portable amp. After each panelist tried all the amps, I asked their opinions of them. We didn’t discuss the prices since they were all so similar, but we did discuss some other practical considerations such as weight and size.
One of the most important attributes of boost pedals is their transparency. In other words, they need to able to boost the signal without changing the signal itself. As easy as it sounds, achieving good transparency is pretty hard and not many pedals are capable of doing so. With that said, a good booster pedal is a pretty powerful tool in the right hands.
I one day hope to be the man my dog thinks I am.WORDS OF WISDOM FROM VARIOUS MEMBERS"most often the guitar will rise or fall to the level of the player""people overthink ****************""Sometimes you gotta know when to shut the **************** up and have a little class. Not you, you're special.""If it sounds good to you then it sounds good"The bull**************** and myths in the guitar world are stacked very high.

(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1377.76, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodH91419, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=799.99, priceVisibility=1, listPrice=999.99, usedCount=3, salePrice=999.99, isOnSale=false, showMSRP=true}
Some of the different aspects of the SG include its much thinner double cutaway body that offered players easier access to the higher frets.  This model is also significantly lighter than the Les Paul and was preferred by many players who wanted the heavier tonal offerings without the back and shoulder pain that can come after a 3 hour gig with a Les Paul.
Acoustic guitar body sizes and styles differ between manufacturers. The C.F. Martin Company has been at the forefront of setting trends in body styles and sizes, and many companies have followed suit with their standards as a solid foundation,and altering their designs to creat custom sizes and styles. The following describes some of the common acoustic guitar body sizes and styles, and shares a little bit about the sound and tone profiles.   These profiles do not follow Martins standards to a tee, but do exhibit some of the most commonly used acoustic guitar body sizes and styles used, many having been influenced by the Martin Guitar Company.
We took another detailed look at all acoustic-electric guitars priced under $500 available from major American online retailers, and for this update, we shortlisted 78 of them for closer analysis. We then collated over 7700 ratings and reviews from forums, videos, retailers, blogs and major music gear publications and processed those data with the Gearank Algorithm to produce a Gearank score of out 100 for each guitar. Finally we selected the highest rated guitars in two of the most popular price brackets, sub $300 and sub $500. For more information about this process see How Gearank Works.
{"pageName":"[mf] pdp: epiphone firebird studio electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";519377","linkInternalFilters":"javascript:,musiciansfriend.com","channel":"[mf] shop","prop7":"[mf] product detail page"}
Mike Hedges also uses this idea a great deal, and explains how it really comes into its own at the mix. "You've got two or three tracks of guitar: one clean, one medium — say, half-driven — and then one really driven. As the song progresses, you might use the nice clean track during the verse, as you're coming to the bridge you fade in the heavier guitar sound, then back it off a bit, into the chorus with everything full on, then back to the next verse and drop it all out. It's all done on one guitar track, so it doesn't sound like you've done 10 guitar overdubs. It has a different quality, it sounds like a live performance, but you've got real dynamics in the sounds. It's a very effective technique."
Monte Allums Mods – Tweaking the tone of inexpensive stomp boxes is an obsession of Monte Allums. He started modding mainly because he refused to spend $200 to $300 or more to achieve great tone. Monte believes that most expensive boutique pedals are simply clones of inexpensive pedals, but upgraded with higher-quality components. So his mods and kits feature classic designs with better components to deliver superior tone.
In one position, lug A and lug B are not connected (that is, the circuit is open). In the other, both lugs are connected (the circuit is closed). To use our seven-sound mod as an example: In one switching position, both lugs are not connected, so the neck pickup connected to the switch is not engaged. In the other position, both lugs are connected and the neck pickup is engaged.

Imagine someone telling you about an old-time music store that had a huge stash of unsold guitars from the 1960s, plus some guitar effects from the ‘70s lying around in its upper floors in Newark, NJ. Well, you can bet it didn’t take long for me to beat a path to the door of Newark Music City (calm down; this was a long time ago and, while the company still exists, it’s long gone from Newark). Even though I was late in the game, there were still unmined treasures to be had. A real Temple of Doom!
All the connections are conveniently grouped together on the back of the unit. You have a mono 1/4” input for your guitar and a stereo output which allows you to listen to your playing on headphones, speakers, or a guitar amp (there’s also a balanced XLR output if you need it). Zoom also includes a USB connection, which not only can power this pedal via USB, but also turns the Zoom G3X into an audio interface! This way you can easily record in your favorite DAW. The USB connection also means you can use Zoom's free Edit & Share software so you can easily manage your patches on your computer. Just like everything else on the Zoom G3X, the input and output options are just right and provide plenty of flexibility. There’s really no major omission we can think of.

The desire for innovative sounds has intrigued musicians in every culture since the dawn of time. Oscillating the volume of a note is an ancient technique — we’ve been able to do it with our voices as long as we’ve been capable of singing. Any musician playing a stringed instrument can create tremolo effect — they simply move the bow or finger back and forth while sustaining a note, as violinists and cellists do. But what about other sounds? How has the addition of mechanical and digital devices changed our music?


Except I wasn’t. Because, really, I could only make two types of sounds. There was the clean, flat, boring, plugged-in-acoustic one. Or I could push the little red button on my starter amp and get a muddy, cloudy, mess of a distortion. However, I was, at this point, somewhat blissfully unaware of what I was missing. I made do with what I had and spent my evenings rocking my house (sorry family).
While the modifications described above have all been passive (i.e. they don't require an external power source), active electronics considerably increase the number of possible wiring options. These can range from simple preamps that offer a volume boost and buffer the instrument's signal (to prevent loss of higher frequencies in longer cable runs), to multi-band equalisers and more.[30][31] Enterprising guitarists have even built entire effects processors into guitars, such as the Korg Kaoss Pad.[32]
Some Korean Ibanez serial numbers are purely numeric with no alphabetic characters. According to Jim Donahue these guitars were manufactured in the Cort factory, in which he had the supervision. Because they had no date stamps available when they started, the serials numbers of Artstar models in this factory were written by hand. These handwritten serial numbers are hard to decipher. The production of these Artstar models at the Cort factory was discontinued in 2003.
{ "items": 1, "margin": 0, "loop":true, "dots":true, "lazyLoad":true, "autoplayHoverPause":true, "navElement": "div", "nav": false, "itemElement": "li", "stageElement": "ul" //"jqueryLazyLoad": true, //"jqueryLazyLoadOptions": { "effect": "fadeIn", "skip_invisible": false, "threshold": 300 }, //"autoplayHoverPause":true, //"responsive":{ "0":{ "items":5 }, "1158":{ "items":6 }, "1340":{ "items":7 }, "1500":{ "items":8 } } }
×