The Original Blackout humbuckers are designed to be everything metal, handling thick rhythm play and well-defined lead melodies at higher speeds. The tone has an almost shimmering quality, especially on a clean amp setting. The tone profile of both the neck and the bridge version of this pickup emphasize treble with a hollowed out mid-range that helps give you the best of searing leads and heavy power chords.
Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
Use a lead to connect the row that the positive (anode) leg of the input cap C1 is on to the row that the base (middle leg) of the transistor Q1 is on. Use a second lead to connect the emitter row (left hand leg) to the ground bus. Finally, use a lead from the collector (right hand leg) row to a new row on the other side of the breadboard, near the power bus.
If you've NEVER heard of EZMix for effects, Impact Soundworks Shreddage 2 IBZ or Prominy V-Metal for guitar, or Alchemist Studios Texas Grind for bass, or Impact Soundworks Shreddage Drums for drums, then I would say you're right, (Amplitube 4 is out right now, by the way). You need Kontakt 5.5 for all of this to work though, so if you have this already you need to upgrade.
From beginners to seasoned professionals, most guitar players will experiment with effects at some point in their musical journey. While learning to play your instrument well should be a top priority, messing around with effects can be a fun way to engage with your instrument and start learning its sound possibilities without a lot of hard practice. There's a huge variety of stompboxes out there, many with very low price tags that make great gifts and can add a new dimension of fun for beginning players.

So what are acousticelectric guitars? Quite simply, it’s an acoustic guitar with slight modifications that means it can be plugged into a power amp. This means that the sound from the guitar can be made much louder for use live or with a band. It also means that, as the signal becomes electric, it can be altered with effects pedals and other equipment. Sometimes, because of this, electric acoustics are used when recording in a studio, though a microphone is often used too.

I purchased this about 8 months ago (it is my first acoustic guitar) so I could learn to play again, I'm a singer by trait, but wanted to pick up a guitar again after a very long break. I did not want to spend a lot of money, but I didn't want junk either, while at the same time I wanted something that would translate well into performing live too. I did my research, and personally, it came down to this or the Yamaha APX-500 (But I really want the Mrk 1 not 2), so I settled for this.
McCarthy's probably one of the toughest guitar masters on this list. His craftsman's hands know not only how to help your instrument make magic again but also (we assume) how to put you in an arm or leg lock and make you scream "Uncle" if you mouth off too much about your guitar's condition. It's probably why guitar tough guys like Zakk Wylde of Ozzy Osborne and Black Label Society, Izzy Stradlin of Guns 'n' Roses and Jason Newsted of Metallica gravitate toward his repair shop. (Not to mention the guys of Motorhead). They know they're dealing with a true master.
Another relatively drastic but easy and cheap way to hot-rod your guitar’s sound with its current components is to alter how and where its volume and tone pots are connected to each other. The difference can be subtle—and it’s more a matter of preference than what’s “correct”—but it can make the difference between a guitar that is just OK and one that really is a joy to play.
Gauge the target volume of your amp. For home recording, it may not be possible for you to record your wicked guitar solo at the volume you need without being interrupted by family, neighbors, external noises, or a visit from the police due to a noise complaint. If your location is not conducive to recording at your target volume, you might consider:
Now I'm talking to the owner of my local mom & pop shop who sold me my Affinty (which is great but the string spacing sucks). Guy is leaning toward making a deal for an Austin. Maybe I'm dead wrong, but I don't like Austins, they are crap IMO. I told him I have some extra cash and maybe we could work something out, but I just feel like this guy has a lousy inventory of cheap guitars and I will be hard pressed to escape with a decent instrument.
The V40 expands the elusive low-to-medium gain range, putting a wide spectrum of subtly shifting overdrive textures under your fingers. There are rotary controls for gain, EQ and master volume. The real fun starts with a two-position voice switch, which subtly changes the V40's character. Voice 1 is centred more on the early 60s 'blackface' tone; Voice 2 is edgier and a touch more aggressive, evoking the tweed amps of the 1950s. A small toggle switch called 'mid kick' adds a touch of extra gain in the midrange, not least to give weedy single coils a lift for solos. There's also a digital reverb with a front-panel level control and on/off switch. Then there's the standby switch, which has two 'on' positions for high power (approximately 40 watts) and low power (seven watts). This switch also works in the V40's single-ended mode, offering a choice of around 1.5 watts in the high-power position and 0.5 watts in the low-power setting. The V40's sonic palette made us sit up and take notice. By reducing the gain, all the mildly overdriven and chime effects normally squeezed into a fraction of the gain knob's travel now occupy the whole range. The V40 Duchess is a unique design - many of its competitors feature high-gain lead channels, teamed with high headroom and often uninspiring clean channels. By focusing on those often-overlooked but highly effective low-to-medium overdrive sounds, the V40 has effectively carved out its own niche, and looks set to become popular for blues, roots, jazz and country players.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]


If it is muted in positions all up and down the neck, and you've already tried different strings, then I think you really need to be looking at the bridge. Is there any sort of slot cut in the saddle for that string? It could be that it is just the right width to kind of kill any sort of vibration from the string. Might be worth slackening the string, lifting the string out of the slot and setting it just a mm or two to the side and tuning it up again to see if that helps. If it does, then you'll need to do something about that saddle. You might be lucky enough to be able to swap it with another string, or maybe even turning it around might make enough of a difference. To be honest it's a hard one to troubleshoot, but if you want to contact me by email about it with some close-up photos, I'd be more than happy to try to help you figure out what the problem is. Email is stueycoolTAKE-THIS-PART-OUT@gmail.com
Since 1982, Dusty Strings Music Store has been a gathering place for instrument players and music lovers. Come explore new, used, rare, and vintage acoustic guitars, electric guitars and pedals, mandolins, ukuleles, banjos, harps, hammered dulcimers, and accessories -- all within reach and ready for you to play! We are an authorized warranty repair shop for both Martin Guitars and Taylor Guitars and carry such builders as Martin, Taylor, Collings, Goodall, Deering, OME, Weber, National, Fano, Nash, Silvertone, G&L, Tone King, Vox, and more. Our school offers private lessons, group lessons, concerts, and special events. Come play music!
Obviously, what I've done is to give myself a choice of three different sounds--a close, ballsy sound, a mid-range room sound, and a more distant room sound. By setting all three mics up at the same time, putting them each in a different input, and assigning them all to the same track on tape, I've given myself the option of having any one of those sounds immediately available to me, or a combination of them.
Rackmounted effects are typically built in a thin metal chassis with metal "ears" designed to be screwed into a 19-inch rack that is standard to the telecommunication, computing and music technology industries. Rackmounted effects may be one, two or three rack spaces high. When purchased from the store, rack-mounted equipment is not equipped with the rugged chassis features used on stompboxes and amps that are designed to be transported as standalone units, such as corner protectors. Rackmounted units are typically mounted in a rack, which is housed in a road case, a tough plastic case with removable front and rear covers that can be latched on during transportation to protect the knobs and switches and then removed during performances. A rackmount unit may contain electronic circuitry identical to a stompbox's, although its circuits are typically more complex. Unlike stompboxes, rackmounts usually have several different types of effects.[13]
By 1968 (and probably with the union of Unicord), Merson and Gulf + Western, Univox amps had begun to employ a Japanese-made chassis in Westbury-made cabinets, still with the high-quality Jensen speakers. These combined tube output with transistorized components. They were covered with a black Rhinohide vinyl and sported a silver plastic logo with stylized block letters – initial cap with a little tail off the left followed by lower case letters – typical of the earliest imported Univox guitars, on the black grillcloth.
As we mentioned, this is both a multi-effects unit and an amp modeler. Like the Boss ME-80, you can use it in a regular editing mode where you set up your signal chain using buttons and knobs, or “Pedalboard Mode” which when activated lets you turn 5 effects on/off via the 5 footswitches along the bottom, much like if you had separate pedals on a pedalboard. This is a nice bonus if you play live and want that immediacy. To sculpt your sounds, you use the small up and down arrow buttons to cycle through your effect types, or slots. You’ve got WAH, COMPRESSOR, DISTORTION, AMP/CABINET, EQUALIZER, NOISE GATE, CHORUS/FX, DELAY, REVERB, and EXPRESSION (which sets what your expression pedal is used for, like wah or volume) available for use. For each type, you can cycle through which effect models you want. There are a ton to choose from, over 70 by our rough count. The DigiTech RP500 probably has the most comprehensive list of all the classic effects, from Tube Screamers, to Pro Co RAT, DS-1, Fuzz Face, Boss CE-2 Chorus, EHX Small Stone Phaser, and many more. All the classic amp models are there too, like Vox, Marshall, and Fender, all with appropriate cab models. If you have your own amp or just don’t care for the amp and cabinet modeling, you can bypass it which leaves you with just stompboxes and effects.
Despite what the Peate copy says, these instruments are not Dobros, but rather Supros. The guitars and mandolin shown in the Peate catalog are identified as being “The New Dobro Electric Guitars,” part of National Dobro electric guitars. However, the No. 1 Hawaiian shown is clearly the Supro frying pan (recall that the Hawaiian in ’35 was the fancier Dobro), and the No. 2 Spanish Guitar and No. 3 Mandolin are clearly labeled “Supro.”
In 1967, McCartney gave his 4001 a psychedelic paint job, as seen in the promo film for Hello Goodbye, and in the Magical Mystery Tour film.[7] A year or so later the finish was sanded off; a second over-zealous sanding in the early 1970s removed the “points” of the bass’ cutaways. McCartney predominantly used the Rickenbacker bass during his time with Wings, until the late 1970s.
it's really hard to beat the ric sound. the 335 12's and fender 12's are cool, but really the ric has the sound we're all familiar with. that being said, everyone has different tastes and I encourage you to play as many different ones as possible. Jimmy Page used a Fender 12 on Stairway. I went rick for that early beatles sound. the neck is tiny but it's part of the instrument.
One reason why the sound changes in different parts of a given room is that sound reflecting from room boundaries reaches your recording microphone later than the sound travelling directly from the amp, causing phase cancellation — in effect a series of peaks and dips in the recorded frequency response, the spacing of which is related to the delay between the direct and reflected sounds. Keith Olsen suggests lifting and/or tilting the amp to minimise the effects of phase cancellation. "Leo Fender put those legs on the sides of a Fender Twin, and he did it so the guy in the orchestra could actually hear it when he was playing soft. But the other reason is that when you put a mic up against an amp tilted that way... you don't get phase-cancellation problems off the floor and wall. Let's take it one step farther. Let's lift that speaker cabinet off the floor and put it up on something that is stable enough to be able to give the speakers a platform to work from, but where... the reflected sound is going to be so far down in volume to the direct, it's of no real consequence... All these things start adding together into mic technique, stuff that you learn over years."


You can divide these further into cabinets and combos. A cabinet is simply an amplifier without a head. The head is all the knobs and so on that can be tweaked to produce variations in tone and volume. Combos include the head, so they're often preferred as they're easier to port around. However, if you want a multi-speaker setup, you'll want to opt for cabinets with separate heads.
Unten ist die Standard-Lage des Stegs für AF-, AFS- und AG-Gitarren. Stellen Sie die Lage ein, um richtige Intonation zu erhalten. AF, AFS, AK TONABNEHMER (PICKUPS) Der Ausgangspegel des Instruments ebenso wie die Signalqualität kann durch die Tonabnehmer-Höhe beeinflusst werden. Die Höhe sollte so eingestellt werden, bis die Lautstärke von Hals- und Steg-Pickup bei voll aufgedrehtem Lautstärkeregler gleich...
{"id": "L20582", "skuOrProductId": "L20582000001000", "categoryId":"site1AAG", "name":"Slash Firebird Limited-Edition Electric Guitar", "pageUrl":"/guitars/epiphone-slash-firebird-limited-edition-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Slash-Firebird-Limited-Edition-Electric-Guitar-Trans-Black/L20582000001000-00-120x120.jpg", "addToCartUrl":"/guitars/epiphone-slash-firebird-limited-edition-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"Designed in collaboration with the legendary Guns N' Roses guitarist, this limited-edition Slash Firebird won't last long. After all, as Slash himself says, "Who doesn't want a Firebird?" Limited to a production run of just 900, worldwide, this version of the iconic guitar combines tradition, like the reissue Kluson banjo-style tuners, with some of Slash's signature touches like the Seymour Duncan Slash signature Alnico II pickups and flame maple top. Great for rock and blues, don't miss your chance to snap one of these up. Case sold separately.", "value":"899.00", "priceMin":"899.00", "priceMax":"899.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"40", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "Best Seller", "checksum":"565047124900", "priceVisibility": "1"}
The numbers back him up. In the past decade, electric guitar sales have plummeted, from about 1.5 million sold annually to just over 1 million. The two biggest companies, Gibson and Fender, are in debt, and a third, PRS Guitars, had to cut staff and expand production of cheaper guitars. In April, Moody’s downgraded Guitar Center, the largest chain retailer, as it faces $1.6 billion in debt. And at Sweetwater.com, the online retailer, a brand-new, interest-free Fender can be had for as little as$8 a month.
Rather than being period-correct reincarnations, Fender's Original series aims for a ‘best of decade’ vibe. So, this Strat is alder bodied with a ‘round-laminate’ rosewood fingerboard that was implemented in mid-1962. In a mid-'60s style we get Pure Vintage ’65 Gray-Bottom single coils on an 11-screw mint-green pickguard with aged white controls. Meanwhile, a concession to modernism is the second, lowest, tone control, which originally would have been for the middle pickup, but here works on both the middle and bridge pickups. Another 'modern' inclusion is the ubiquitous five-way lever switch, which didn’t actually replace the original three-way switch on the Stratocaster until 1977. We defy anyone who opens a case and sees one of these beauts not to have an ‘OMG’ moment. The guitar that launched thousands of dreams back in the day still impresses 64 years on. You’ll find these ‘fixes’ on many Fender Custom Shop models, of course, but while these don’t come with any ageing or relic’ing they are significantly cheaper. Yet, viewed from a 2018 perspective, it gives Fender’s USA models a rare unity, a vintage nod to the escalating modernism  of the Professional and ultra-tweaked and posher Elites. If you hanker after a new USA-made production Fender and want the most vintage-spec possible, this is now it. Vintage-inspired, yes, but with the fixes that many players will embrace.
One of the more common questions beginners have is why even bother with reverb pedals when most modern amps have a built-in version of this effect? To be honest, if you have a vintage tube amp with an actual spring reverb inside, there really isn’t a good reason to go with a pedal. However, most don’t. The thing that makes reverb pedals a much better solution in most cases is that you get a level of quality that can be used on stage.

Musicians might not want to be replaced by machines - we (or they, as it were, because I lost whatever musician credentials I might have earned annoying people with my wooden flute as a beggar on the streets of a tourist town when I started programming computers to play music) might make a strong case that no machine can express the human soulfulness of music. It is easy to conclude that, the more of the musical task that is assigned to a machine, the less soul is expressed in the music. Well, great big rock-n-roll wall of sound that all over your acoustic guitar soul. That stack of Fender amps I can hear five miles from the stadium where David Gilmore is strumming a guitar is as much an instrument as was the Shepard's lute - and a much more popular instrument now, for audiences attuned to the daily roar of tires crushing air against pavement.
The world-wide reputation of the company is not based on design data and performance alone. The real key to success of SWING is "Outstanding People". Every staff member at Swing has a background as a professional musician. Moreover, we were all career veterans in guitar engineering with decades of combined experience, well before founding our new vision; Swing Guitar Technology. If you are familiar with musical instruments companies or have seen their ads or brochures, you may notice their catch phrase like "It's about Music." Nothing could be closer to the truth, based on Swing's pedigree. From the selection of materials to their treatment and hand fitting. From mechanics to electronics. Each stage of each final product is mastered by SWINGers.
Carvin is a guitar company with a different business model than the rest. You won’t find them at your local music store because Carvin only makes custom guitars. Their instruments are based around a handful of templates and each feature components that are individually chosen by the buyer. For this reason, it’s very rare to find two Carvins that are completely identical.
Now, you may be wondering if there are things to love about Guitarist and there certainly are. The GUI is incredible and simply one of my favorites around. And if you need funk or jazz rhythms fast, then this is your guy — the auto-wah feature saves this plugin. The more you put realism out of your head and strive for interesting tones, the more you’ll like Guitarist.
From its humble beginnings as an experiment in resonance to the flagship image of rock and roll, the electric guitar has taken many forms over the years. All of them have their advantages — and their disadvantages. Every manufacturer has tried their own take on some of the different body styles, which include hollow body, semi-hollow body, fully solid body electric, and even acoustic-electrics. Here, we will take a look at what exactly those terms mean, and what to look for in each.
Tapping, in which both hands are applied to the fretboard. Tapping may be performed either one-handed or two-handed. It is an extended technique, executed by using one hand to tap the strings against the fingerboard, thus producing legato notes. Tapping usually incorporates pull-offs or hammer-ons as well, where the fingers of the left hand play a sequence of notes in synchronization with the tapping hand.
Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.
While a high school degree is not necessarily required, it does provide an edge for graduates who wish to become guitar technicians. Students should concentrate on classes such as music, band, English, shop class and mathematics. A major part of any education should include guitar lessons. Techs often need to be able to play by ear and must be able to pick up on any nuances in an instrument's sound and tuning.
EQ or equalization effects work by boosting or cutting specified frequency bands within the sound signal. From treble or high-end sounds such as the sizzling sounds of a riveted cymbal to low-end sources such as the thump of a bass drum or bass guitar, EQ effects don't change the pitch but rather alter the timbre or quality of the sound. Depending on the application, EQ control can be quite precise or very simple.

Great post a lot of useful information here I found this old acoustic guitar made by lotus I have never heard of this brand and have been trying to research it for about a month now and haven't gotten any closer to finding out the history of it if anyone know anything about them I'm all ears it has a tag on the inside model no. LW 65 or g5 lotus made in japan thanks in advance for any information I can get
Thinking out loud... what defines electronics then? I've always assumed that the pickups, caps, pots, etc. inside an electric guitar constituted an electronic system. The "guitar's electronics" facilitate a deliberate flow of electrons through a circuit with semi-conductors, etc. Heck, with coils and magnets (and sometimes battery packs), they also provide the electricity that's conducted through the system.

More and more are finding themselves downsizing their pedalboards, if not totally swapping all their stompboxes for a multi-effects unit. There are also many who are looking to upgrade their existing guitar processor. Whatever your case may be, it is our intention to help you find one that fits your needs, or at least point you to the right direction.

Rock music evolved from Blues, the music of the streets. Most musos’ of the 50s and 60s were poor and guitar amps made to a budget. Some but not all technical principles of amp designs were well thought out. Fender and Marshall were the dominant and most copied brands. The powerful amps had 4 output valves in parallel push-pull and gave approx 60 - 100Watts.
Here we have a VERY WELL MADE 1978 Vintage Japanese Quality Replica of G!b$@n Dove Acoustic guitar. This is a "SUPERB" top of the line model its Premium woods used in its construction along with very good workmanship see the bindings and the detail wow...and has now over the past 28 years has wonderfully aged into a very nice vintage guitar in its own right. The Vintage aged spruce top is of a high quality on often seen today with a woderful aged finish, also see the sides back & neck all made of premium grade mahogany WoW! The finish is SUNBURST and was done by a master no doubt I compair this very favorably with any G!b$@n for its fit & finish and sound! Believed to be from the same factory as the Aria and a few others exported to St. Lousi music in the 70's...this example is in very good - excellent original condition rated 8.5++/10 Quite a clean example. The frets are in good condition the neck is straight and tuners work well all and all a very enjoyable player with a wonderful rich tone. A Gig bag or case is optional and is available. Dont be fooled by the low price under $400 this guitar would cost over$1200 today out of Japan! Thie is a Bargain find get her before shes gone. .
Clarence Leonidas “Leo” Fender was established this brand in 1946. The Fender Musical Instruments Corporation (FMIC) manufactures the stringed instruments and amplifiers, such as solid-body electric guitars, including the Stratocaster and the Telecaster. This brand is the kings of hearts and getting the popularity from blues to quick rock tempo. Fender’s Precision and Jazz Bass models are now considered to be the standard to which most other electric bass guitars are measured. It’s famous for best guitars which are made ever in the history.

Yes, I see your point, quite. This article was not aimed at experienced Strat stranglers, but more at their parents or relatives, who may have wished to give them a pedal as a holiday gift but didn't know what to purchase or what the effects might be. We thought a simple guide might be helpful for the completely uninformed. Obviously, we're not an established guitar journal, so thank you very much for your helpful and constructive critique.
Efficiency – also called sensitivity this is measured in dB at a distance of one metre. This has more to do with how loud a speaker sounds than its power rating. A Jensen P10R, for example, is rated at 95dB; a Celestion G12 65 at 97dB and an EVM12L at 100dB. The numbers don’t look that different, but the difference in terms of perceived volume is truly staggering.
A looper allows you to record a musical passage or phrase then play that passage back repeatedly. You can then record more loops and layer them, one on top of the other. Most recording and playback functions are foot controlled, and once you’ve created suitable backing tracks, you can can then play over the repeated passages in real time, creating exciting one-man-band sounds never possible before. Many of the more advanced models include built-in rhythms, custom effects, inputs for vocal mics and other instruments, plus MIDI and USB capabilities so that you can use the looper as part of your digital song-creation and recording processes.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Custom - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Diecast, Gold, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
Launch price: $4,200 / £3,235 | Body: Mahogany with carved figured maple top | Neck: Mahogany | Scale: 24.594" | Fingerboard: Rosewood | Frets: 22 | Pickups: 58/15 LT Treble humbucker, 58/15 LT Bass humbucker | Controls: 2x volume, 2x tone (with push-pull coil-splits), 3-way selector switch | Hardware: PRS two-piece bridge, Phase III locking tuners | Left-handed: No | Finish: McCarty Sunburst, McCarty Tobacco Sunburst, Orange Tiger, Trampas Green, Violet, Antique White, Black, Black Gold Burst, Blood Orange, Champagne Gold Metallic, Charcoal Burst, Emerald, Faded Whale Blue, Fire Red Burst, Frost Green Metallic, Gold Top, Gray Black The reality is, each of these approaches to adding effects to your tone has advantages and disadvantages. Are you a no-effects type of player, or a pedalboard kind of player? Maybe you like some pedals for your dirt, but would like your delay and reverb in the effects loop of your amp. Or maybe you would like to go the full on w/d/w route, for the ultimate in power and programmability! Let’s take a closer look at the options that are out there. Who created the first distorted electric guitar sound in history? I’ll tell you: the first adventurous player to plug a hollowbody guitar into a tube amplifier way back in the 1930s, that’s who. We might have forgotten his name, or maybe there was no one there to witness the event, but you can bet he lifted up that guitar, checked out his new amp, saw that the loudness control went to 10, and cranked it up to hear just what it could do. This company specializes in guitars meant for heavy metal and hard rock lovers. It is the proud manufacturer of some of the most outstanding designs in the history of metal such as Warlock, Bich, Virgin, and Mockingbird. It molded and influenced hard rock and thrash revolution of the 1980s. It is a great choice if you are looking for some edgy designs for your guitar. The guitars are available in 6, 7, or 8-string models that are suitable for players of all genres. Their recent introduction was the Villain series that has incredible designs and has a body of basswood or mahogany. Since 1982, Dusty Strings Music Store has been a gathering place for instrument players and music lovers. Come explore new, used, rare, and vintage acoustic guitars, electric guitars and pedals, mandolins, ukuleles, banjos, harps, hammered dulcimers, and accessories -- all within reach and ready for you to play! We are an authorized warranty repair shop for both Martin Guitars and Taylor Guitars and carry such builders as Martin, Taylor, Collings, Goodall, Deering, OME, Weber, National, Fano, Nash, Silvertone, G&L, Tone King, Vox, and more. Our school offers private lessons, group lessons, concerts, and special events. Come play music! XM DLX2 is one of two Deluxe models in the highly acclaimed XM series from Washburn. The other one is XM DLX2F. XM DLX2 comes with a solid, double-cut body made of basswood back and maple top. Top is a two-piece and it features the characteristic XM series contour. As all models in this series are, XM DLX2 is made primarily for players of heavy metal and shred styles. Strong pickups, super fast neck and 24-fret fingerboard indicate this. Bridge section features a tune-o-matic bridge with string-through-body construction and black plating. In its front, Washburn installs a pair of open-coil humbuckers. Master volume, master tone and a three-way toggle pickup switch comprise the controls unit. 24-fret fingerboard is made of rosewood and its installed on top of a set in maple neck. Once you are satisfied that the curve of the neck is in the acceptable range, check the string height at nut. Depress each string at the third fret and look back towards the nut to see how the string sits over the first fret. The string should neither be sitting on the first fret nor far enough above that you can see a gap thicker than a sheet of paper. This is a very subtle point to reach and you need proper nut files to set it. This setting is crucial both for achieving proper playing height up the neck, and for achieving proper intonation. If it is too high here, you are going to end up setting the action lower at the saddle than it really ought to be, resulting in buzzing ( the string will measure out "correct" at the 12th fret yet actually be inclining down as it progresses towards the bridge saddles). Additionally, a string set too high at the nut will likely play noticeably sharp at the first and other lower fret positions. Volume pedals are volume potientiometers set into a rocking foot treadle, so that the volume of the bass guitar can be changed by the foot. Compression pedals affect the dynamics (volume levels) of a bass signal by subtly increasing the volume of quiet notes and reducing the volume of loud notes, which smooths out or "compresses" the overall sound. Limiters, which are similar to compressors, prevent the upper volume levels (peaks) of notes from getting too loud, which can damage speakers. Noise gates remove hums and hisses that occur with distortion pedals, vintage pedals, and some electric basses. ok thank you so much! Unfortunately, it’s not as loud as the other single coils of my strat. I tried splitting to the other coil but doesn’t split. I followed the wiring diagram bit by bit. =( Thank you so much for responding right away. I’m a session musician here in our country and this is actually my first time to mod my guitar. Thank you so much! Good questions. Firstly, swapping the saddle around has the effect of moving the tapered top edge of the saddle closer to, or farther from (depending on which way it was to start with) the front of the bridge. If you're wanting the string to be as long as possible, for example, you'd need to make sure the saddle is oriented in such a way that the tapered edge is at the tail end (farther from the pickups). If you look at my pictures above, you'll see that my D-string saddle is originally oriented in this way, but in my case I need to SHORTEN the string, so I rotate it and this gives me more forward adjustment. Since you need to do the opposite of me, you'd therefore need to make sure your saddle has the same orientation as what mine had BEFORE I changed it. I really hope that makes sense. The amplifier includes buttons for four different amplifier simulations: Clean, Crunch (a typical rock/blues sound), Metal (self-explanatory), and Insane (a version of Metal that our panelists found so distorted as to be nearly unusable). Like the Champion 20, it has a gain control (which is labeled Drive), and it adds a midrange control to its bass and treble controls. Tremolo – Not to be confused with a tremolo bar (which is closer to the Whammy pedal), this effect works on volume. You can think of tremolo pedals as being like strumming a note, and then wiggling the volume knob on the amp while it’s ringing. Usually, the pedal will have controls for speed (equivalent to how fast the volume is “wiggled”) and depth (equivalent to how far the knob would be turned). Most Fender guitars are equipped with single-coil pickups. They have a lower output level than dual-coil pickups but sound brighter and sharper, which is perfect for clean and crunch sound. Both the Telecaster and the Stratocaster generally have an ash or alder body, a maple bolt-on neck and a rosewood or maple fretboard. Some other Fender models were also moderately successful (the Jazzmaster, the Jaguar or the Mustang). Squier, a brand that originally manufactured strings, was bought by Fender to become a sub-brand and sell guitars manufactured in Japan from 1982 onwards. The color black is powerful, mysterious and evokes a sense of potential and possibility. It’s widely regarded as the single most popular color for Rock ‘n’ Roll thanks to rock pioneers such as KISS and AC/DC. Get back in black with these fine offerings from Dean with our vivid take on the classic black electric guitar with a few other shades thrown in for good measure. Plug in and play. Get your wings! Guild acoustic guitars are played by some of the best professional musicians in the business. From this standpoint, Guild is on par with Martin and Taylor, and completes the triumvirate of American acoustic guitar titans. As you’d expect, the prices follow suit. However, the GAD series offers a way for intermediate players to get a Guild acoustic for a reasonable price. Every guitarist who bends or vibratoes a string to make it sing owes a debt to B.B. King. With influences as diverse as T-Bone Walker, Charlie Christian and Django Reinhardt, the late guitarist turned the blues world upside down in 1952 with “3 O’Clock Blues.” Almost overnight, the harmonica was supplanted as the primary solo instrument in blues, as guitarists scrambled to imitate B.B.’s soloing style, especially in Chicago. Want to write blazing leads and screaming solos? Crank the pitch bend up, use one of four vibrato modes, and shred to your heart's content. Need some ultra-chunky rhythm chugs? S2 features both single-note and powerchord palm mutes with up to 5 layers and 8 variations each, offering superior realism and maximum options. While it excels at rock & metal playing (both lead and rhythm alike), it is also well-suited for many other genres thanks to its clean tone and huge range. The Marine Band 365 Steve Baker Special (365/28 SBS) possesses the same construction as the original 365, but with low pitched tuning to their natural major keys, available in C, D, G, A, and F. It is named for, and was developed in part by noted harmonicist Steve Baker, who resides in Germany and has contributed to the design of several other Hohner harmonica models, including the Marine Bands Deluxe and Crossover.[18]  This one SOLD pictured has been SOLD OUT: This is one of my favorite vintage Alvarez guitars and is always truly a very good surprise just how great these sound / impressive and I have collected more than several over the years of this very model vintage era lawsuit guitar in AMAZING Condition. Here we have a wonderful and very clean example of a Vintage Japanese Acoustic its a late 1970's great Alvarez 5056 with the most intricately detailed inlay work everywhere on the body.... the front & back in Abalone & the fingerboard is rich - dark and wavy grained it looks to be Brazilian Jacaranda Rosewood and has the Gorgeous Tree of Life in mother of pearl & abalone inlayed into the rich rosewood fingerboard WoW!,even the bridge has Mother of pearl inlaid, (you should have a real good look to come to your own conclusions if its something you like ) and the frets are in very good original condition... action is very good nice & low adjustable either way with no buzzing anywhere on the fretboard real nice playing example here folks.. The finish has a natural golden patina as seen to it and this guitar is strikingly beautiful. No cracks, no repairs, very good - excellent vintage used condition and is JVG rated at 9/10 WoW!... She's very EZ on the eyes to say the least and a premium performer this vintage piece has had over 33+ years to age and mellow and was a one owner California guitar in above better than average condition... no splits or cracks or separations or repairs ever... I believe this to be the cleanest best playing vintage 5056's we have ever had in JVG or seen for that matter. This one is a real pleasure to play! HERE IS A LINK TO CUT & PASTE TO SEE MANY MORE PICS OF THIS INSTRUMENT: https://picasaweb.google.com/gr8bids/Alvarez5059TreeofLifeVintage?authkey=Gv1sRgCNLn6LnEg8bmCQ#slideshow/5613001158042817730 . Made of mahogany, the Destroyer's iconic body style has been attracting artists for years. It features a mahogany slim neck grip and set-in neck that offers ultra-smooth playablity. Electronics include DiMarzio Air Norton and The Tone Zone pickups for a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. { "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000-00-60x60.jpg", "imgAlt": "" } ] } Overdrive originally resulted from the natural breakup that occurred when a tube amp received an overly hot signal from a guitar. This pushed the tubes to deliver a subtle, warm breakup. Generally overdrive is a more subdued, natural form of distortion. While you don’t have to use an overdrive effect with a tube amp to get a great sound, the combination of the two can produce a rich, pleasing tone that many guitarists prefer. The first overdrive effects were designed to push more signal into a tube amp, giving it the very throaty, mid-range tone associated with Stevie Ray Vaughan. With that in mind, many of today's pedal makers have created circuitry to add that desired tone when used with a solid state amps as well. Since overdrive is a signal boost, adjustments from your volume knob will create a variety of different sounds. Frets are the metal strips (usually nickel alloy or stainless steel) embedded along the fingerboard and placed at points that divide the length of string mathematically. The strings' vibrating length is determined when the strings are pressed down behind the frets. Each fret produces a different pitch and each pitch spaced a half-step apart on the 12 tone scale. The ratio of the widths of two consecutive frets is the twelfth root of two ( {\displaystyle {\sqrt[{12}]{2}}} ), whose numeric value is about 1.059463. The twelfth fret divides the string in two exact halves and the 24th fret (if present) divides the string in half yet again. Every twelve frets represents one octave. This arrangement of frets results in equal tempered tuning.  What makes the THR100HD special is its clever digital power amp, which faithfully mimics the operation of real valves. Then there's the fact that you get two of everything: two preamps, both with a built-in booster function that behaves as a stompbox; two effects loops; two power amps; two XLR line outs. What you see is very much what you get, with a five-position amp voice selector, which packs three overdrives - crunch, lead and modern - and two cleans: solid, and er, clean. There's also a channel volume control, because the master volume control works inside Yamaha's Virtual Circuit Modelling environment, adding more drive to the THR's digital power amp simulation, which in turn has five different valve choices, as well as Class A or Class A/B operation. Lurking on the rear panel are two speaker-simulated balanced XLR line-outs, with a ground lift switch that uses the latest Impulse Response cabinet simulation. There are superb Fender-influenced cleans, bluesy touch-sensitive crunches and a choice of classic or modern lead tones, all footswitchable for your convenience. The tones are so convincing it's really hard to believe there are no valves. The interaction of the clever digital power stage with the loudspeaker is just like that of a good valve amp, and the virtual valve choices are uncannily authentic. Shop our selection of guitar and bass electronics parts and supplies. Everything you need to to finish your guitar electronics project like a pro. Volume and tone pots, pickup selectors and mini switches, jacks, tone capacitors, wire, solder, shielding and more. Get the full potential from your guitar's pickups with the finest quality guitar electronic parts from top manufacturers like: CTS, Bourns, Fender, Switchcraft, CRL, and more. The final stage of our ME-80 signal chain is delay and reverb. These ambience effects create the illusion of playing in a different space. It makes the most sense to have them at the end of your effects chain. If you think about it in real life terms, a sound is fully formed it goes out into any space. As a side note, delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay. Simple mistake that the beginners do is not selecting the right pickup on the right time. For example Normally they put the switch for the bridge pickup for soloing or do the powerchords. But then, to do some plucking, clean strumming or ryhthm, they still using the bridge pickup. So the sound is so dry, They should change it to toggle number 2(or for 5 way switch, toggle number 2 or 4) Vox's history goes back to the late '40s, where they originally built electronic keyboards. Their presence in the guitar market started in the late '50s when they launched the 15-Watt AC15 amplifier which ultimately caught the attention of many iconic artists - including The Beatles, Queen, Dire Straits, The Yardbirds, The Rolling Stones, The Kinks and many more. These artists helped spread the brand's popularity around the world, but ironically, they were not enough to make the company profitable. This resulted in the Vox brand being owned by many different companies, thankfully Korg took over in 1990 and continues to take good care of the brand up to this day. These days, Vox is still the go-to amp for chimey and jangly clean tones with an extensive line up of amplifiers, interestingly, their line up still includes modern reproductions of their popular AC15 and AC30 combos.  As music professionals, we're all familiar with guitarists and the rows of pedals they set up on stage at every gig. They're definitely on to something when it comes to effects on-the-fly, but when you're setting up a studio or pro audio rig, there's a simpler solution: multi effects processors. These full-sized units bring a ton of versatility to the table (or, more accurately speaking, the rack) and they can play a crucial role in shaping your own signature sound. Launch price:$799 / £679 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Maple/pau ferro (dependent on finish) | Frets: 22 | Pickups: 3x Vintage Noiseless Single-Coil Strat | Controls: Volume, 6-position V6 rotary tone switch, tone, 5-way pickup selector | Hardware: 2-Point Synchronized Tremolo, Deluxe locking tuners | Left-handed: No | Finish: Olympic White, Mystic Ice Blue, Classic Copper & 3-Color Sunburst
Zappa – would have liked to hear him play with Hendrix – as a compliment not competition. Zappa, a classically trained musician, playing in a rock and roll world,had such depth of experience from without – as much as Hendrix had from within – too bad the intensity killed him; Zappa tamed it and had fun with it. Hendrix was driven by it. Great guitarist? Who cares! My picks are artists, something a machine, human or otherwise can not approach let alone touch, and that is what it is all about, touching the soul through music. One trick ponies are a dime a dozen – some of them are at the right place at the right time and their ego does the rest. Who will be remembered a hundred years from now – it will not be the "best".

But alongside Davy Graham and Jim Hall, the other musician I really wanted to remind you about was Martin Taylor. Astonishing technique – enough to make the shredders weep with envy, coupled with an exquisite feel for melodic line. Martin is one of the few guys (or gals) whose playing brings tears to my eyes regularly. When one of his albums gets into my CD player it stays there for weeks. In many ways, a natural successor to Django Reinhardt, truly a master of music as well as the guitar art and DR’s principal competitor for a top ten place in my list.

I'm not sure if the same applies to LPs, but on my BC Rich Mockingbird (which has the same tone/volume setup) if one volume knob is all the way off it'll only mute the guitar in the center position. Say the bridge volume is at 10 and the neck is at 0, I'll still get sound if the bridge pickup is selected but I won't get sound if both or just the neck are selected.
As Jay Verkuilen, has already noted here (no pun intended!), be careful not to hammer too hard on the unplugged guitar as you can be fooled into thinking you have to play much harder that you really do. Fretboard exercises & scales, practicing chord forms, and the like while unplugged is beneficial to your playing, "muscle memory," and aids your relationship with your housemates and neighbors.
From the 1920s to the 1940s, upright bass players who wanted to strengthen the acoustic sound of their instrument had to use small portable PA systems or guitar amp combos designed for acoustic guitar or archtop guitars. Since these systems were not specifically designed to amplify bass instruments, it is unlikely they provided good low-frequency sound reproduction (particularly guitar amps, which are not designed to go down as low in pitch as the low E (41 Hz) and A (55 Hz) strings). In the early 1920s, it was very hard for an upright bass player (indeed for any musician) to find any amplifier and speaker system to make their instrument louder. The only speakers that could be bought during the early 1920s were "radio horns of limited frequency range and low acoustic output", and the cone speaker (which is widely used in modern-era amp cabinets), was not offered for sale until 1925. The first amplifiers and speakers were PA speaker setups; while an upright bassist could potentially have used one of these early PA systems, they could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
Compared with many of the guitar models on this list that have been around for half a century, the Ibanez Artcore AF75 is still a baby. Ibanez introduced its Artcore line of semi and full hollow body electric guitars only in 2002. Nevertheless, the Artcore guitars have amassed a massive fan base because of their tuning stability, rich tone, impressive sustain and overall quality. Plus, they’re also extremely affordable considering their features.
While the HSS Bullet Stratocaster isn’t available in a left-handed model, the similar, somewhat more costly Affinity Series Stratocaster is available in a left-handed version. This guitar differs from our top pick in that it uses slightly higher quality of parts and has a higher quality finish (based on our experience with the Affinity Series Jazzmaster); it has a single-coil pickup instead of a humbucker in the bridge position (which will be noisier and also brighter-sounding); and it has a vibrato bar.
Whether you have your sights set on a dreadnought acoustic or a classic Squire Strat, the guitar value packages found here consist of everything a player needs to make their guitar learning experience an exciting and enjoyable one. From Fender, Dean and Alfred to Jasmine, Ibanez and Martin, all the big names are here. You'll have no problem finding the perfect guitar value package that pertains to your specific music tastes.
The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. Many believe this design improves a guitar's sustain and timbre. A few examples of string-through body guitars are the Fender Telecaster Thinline, the Fender Telecaster Deluxe, the B.C. Rich IT Warlock and Mockingbird, and the Schecter Omen 6 and 7 series.