Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 48mm - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Dot - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 7 In-Line - Bridge: Edge Zero II - Cutaway: Double - Hardware: Chrome - Pickups: DiMarzio - Pickup Configuration: H-H - String Instrument Finish: Black - Made In: Japan

I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.
Here is a list of the schematics that are exclusive to this site. We created several and we have redrawn some schematics that were already available on the internet  for readability or ease of use (these needed an easier-to-read format, corrections or part identifiers).  Many of these schematics include “modernization” that are included and explained in the “Project” for the given schematic.  You may freely post links to any of the pages or files on this site, but please do not put copies of these files on your site. We frequently update our files.  If you want to see photos of the original units of any of these guitar effects see our  “Originals” board on Pintrest  Note: All Trademarks mentioned here belong to their owners and not to General Guitar Gadgets
I received a Dorado 12 string as a birthday present in the late 1990s, installed a passive pickup, and played it around the house and at small venues for fifteen years or more. For an all-laminate, smaller body 12 string with a trapeze bridge, it sounded great. The neck was comfortable, too. I had a 1965 Gibson B-25 12 for a few of those years, but the neck was way fatter than the Dorado, which I passed along to a friend in need. I can't say the Dorado sounded better than the Gibson, but it sure out-jangled it. Wish I still had it!

Ovation guitars are produced in the U.S. as well as in Korea and China. Those models in general have a wooden top. Recently Ovation significantly reduced the production of U.S. made Ovation models. From 2010 on better models (e.g., Legend, Elite, Custom Legend, Custom Elite) used to be available, both, made in the U.S. and made in Korea. Before that, the mentioned models were U.S. made. In recent years many U.S. made guitars could be identified by the LX in the product name (e.g., Legend 2077LX), whereas the Korean-made version of the same guitar had AX in its model name (e.g., Legend 2077AX). Again, this name-system has not been used throughout the whole guitar model range (e.g., Ovation 1617ALE). Nowadays only a few U.S. made models are being produced, mostly signature and limited edition models (e.g., Custom Legend 1769-ADII Al DiMeola). Production of the standard model range of Ovation guitars in the U.S. has been seized.[24]
There have always been slight variations in the color of the cream plastic parts used on Gibson and other guitars. It's not uncommon to see brand new and vintage guitars with bindings, pickup rings, toggle switch rings and pickguards that don't perfectly match in color. We do our best to match all our cream products, but there's no absolute control from batch to batch, or from supplier to supplier.
Leo Fender didn’t know how to play guitar. The inventor of the famous guitar brand, which includes the Telecaster and Stratocaster models (favored by Kurt Cobain and Jimi Hendrix), never learned how to play his own instrument. Fender began as an accountant with a knack for repairing radios, later turning that hobby into a full-time electronics operation. The highly versatile Telecaster, which he developed in 1950, became the first mass-produced solid-body electric guitar.
Featuring a comfortable neck and solid spruce top, the Epiphone Dove Pro Acoustic-Electric Guitar rings out with full, rich sound. Based on a design going back to 1962, the Dove Pro is equipped with a Fishman Sonicore pickup system that accurately reproduces its acoustic tone when you plug the guitar into an amplifier or PA system to play with amplified instruments. A terrific value.
The person who said "I have a friend who plays an ashton, and he actually thinks it's a good guitar, while he constantly has to put paper under the strings because otherwise everything above the 3th fret is literally unplayable. Poor guy" MAY I POINT OUT that they just stated how the guitar was in a poor condition but said nothing about why or how long the guitar has been played and all these essential details.
SOLD OUT: Here is another fine example of a Professional high quality Japan Crafted guitars...this one is "cross-braced" and is a Dreadnought style acoustic like a martin type exhibiting superior solid construction as well as the very high grade Mahogany body Top - Sides & Back which appears to be all-solid. The necks fretboard is a wonderful Indian Rosewood. This example is believed to be a Vintage 1986 Model. Serial # 86021355. The sound is rich and expressive and very tonefull as would be expected from a quality built instrument. The playability "action" is great EZ to play and this guitar stays in tune very well to with its quality Original Takamine sealed Chrome tuners "grover type" This guitar is professional grade and will serve you well. This guitar is not a new guitar and IS a real VINTAGE guitar and has mellowed well and its condition is rated a solid 8.5/10 very good-excellent with some natural wear -dings-scratches etc.. Overall appearance is Gorgeous! and is sure to please. SOLD .

The Indiana Thin Body Acoustics give you all the sonic punch you need but in a more compact body size. Starting with a spruce top that's matched to mahogany back and sides, the I-TB2 Series were created for acoustic players that find that a traditional dreadnought body size is a bit too bulky. Having a tighter profile gives these guitars and almost electric guitar feel and they're perfect for the stage or studio. Great action and playability right out of the box! An on-board 3 band EQ gives you total control at the touch of a button and all players love the extended cutaway for upper fret access. Sealed diecast tuners, nickel silver frets, gold hardware, high gloss finish and 10 Year Warranty make the Indiana Thin Body Acoustic series a great alternative for any player.
Hello. If any of you who have a dorado guitar would like to sell it, please email me ( I am always looking for cool vintage guitars. I am a big fan of the Gretsch name and have found the Dorados to be very nice guitars. I don't check follow ups much, so you'll have to email to get in touch with me. Put "Dorado" in the subject because I get a lot of spam and tend to get crazy with the delete button. Thanks :)
Before I got this guitar, I purchased a classical "starter" package that had crazy good reviews on Amazon. I have been playing guitar on and off for a few years but I would still classify myself as a beginner. In addition, it was my first classical guitar. I was extremely disappointed with the starter package (Yamaha) guitar. Chords sounded awful, and subtle chord changes, such as cadd9 to g were lost in the deep, bass sound. I understand that classical guitars are mainly for finger picking, but I need a guitar that can do both.
Loose frets are especially problematic in certain old guitars, but are generally very easy to fix. You'll be amazed at the difference you can make with just a few tools, a bit of knowledge, and a little time. Fixing loose frets can eliminate fret buzz, remove sharp fret ends, and greatly improve the tone of any guitar. If your luthier bill will be greater than the value of your guitar, definitely time to have a go yourself!
The semi-hollow guitar is based on having a “tone block” that runs down the center of the body of the instrument.  This reduces feedback issues while still maintaining the woody tone of the true hollow body instruments that are widely used in Jazz.  This allowed the pickups to be mounted to a solid block, while the outer portions of the instrument are hollow, which are often adorned with “f-holes” much like instruments of the Violin family.  This type of build provides the resonance and tone of fully hollow instruments, while providing a resistance to feedback that allows the guitar and amplifiers to be used at a higher volume.
In one position, lug A and lug B are not connected (that is, the circuit is open). In the other, both lugs are connected (the circuit is closed). To use our seven-sound mod as an example: In one switching position, both lugs are not connected, so the neck pickup connected to the switch is not engaged. In the other position, both lugs are connected and the neck pickup is engaged.
Every guitar player loves pedals. We all have at least a handful in our collection and will always try a new one we come across. When you're starting out, you probably know when you need something, but you aren't exactly sure what it is. You may not even know what flanging or phasing actually does to your signal and how that's different from a chorus effect. We're offering below some great effect choices that will add some character without overtaking your sound, so you can really distill out what each of these effects do. While distortion and overdrive have their place (and are usually the effects beginners jump to initially), the following picks offer some other alternatives that will feed your creativity and help get you started.
Because any acoustic guitar can be made into an acoustic-electric, from what I’ve seen — and this is simply an observation, not a blanket statement — most of these sacrifice both quality of guitar and quality of pickup to sell affordable instruments in the name of convenience. So for the introductory acoustic player, here is my advice: Skip the acoustic-electric section and find a plain ol’ acoustic guitar that you like. When the time is right, plenty of companies make a variety of pickups designed for acoustic guitars, which will give you more options when selecting a method of amplifying your acoustic.
Description: Body: Koa - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Rosewood - Binding: White Sparkle - Frets: 22, Jumbo, Medium - Inlay: Thumbnail - # of Strings: 6 - Scale Length: 24.6" (62.5cm) - Headstock: 3+3 - Bridge: Rocking Bar - Bridge Construction: Ebony - Cutaway: Single - Hardware: Grover Romantics Tuners, 3x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: FilterTron - Pickup Configuration: H-H - String Instrument Finish: Flamed Koa
PRS started off in the 1990s. At that time, it seemed Les Pauls were being swapped in favor of a PRS guitar. PRS leveraged this opportunity to continue the trend, making PRS more accessible to all. Hence, they launched another line of product with affordable price tags – the SE guitars. Nonetheless, one cannot consider SE guitars as the beginner’s guitars, since they all flaunt with high-end specs like other instruments. Through these guitars, one gets an opportunity to enjoy playing a pro guitar without causing a blow to your budget.

Now that we’re comfortable with the basic wiring of a guitar, we can look at some of the more popular mods. This article introduces mini toggle switches and push/pull pots, and shows how we can use these to modify a Strat in such a way as to allow use to add the neck pickup to any selection. This expands the number of available pickup combinations to 7.

We've already shown you one of Epiphone's Les Pauls. However, that guitar and this model we're looking at here are simply not comparable. Les Paul Standard features a much better set of pickups as well as hardware. Each of the four available finishes on this thing is superb and includes a number of subtle details which really add to the beauty. Most importantly, Epiphone's Les Paul Standard will give you a true taste of what a legit Gibson Les Paul tastes like without breaking the bank.

I was buying my first acoustic guitar ever in my life, and I'm happy to say I picked this store. When you walk in you pretty much feel that you're in another world filled with music and color in contrast with the cloudy days of Seattle. I researched a little on their website before coming in to see what guitars were within my price range, what type of finish and strings. I said to the guy who greeted me at the door: "I'm looking to my buy very first acoustic guitar." And felt a little nervous not knowing anything about playing. Handed him my note card of guitars and he led me into a practice room where he brought the guitars I was interested in and played them for me (since I had zerrrrrooo experience) so I could hear the tone of the guitars. He was very professional, and also took his time making sure that I picked a guitar that I liked. Even gave me a little history about where they are made and how the company sources their wood, etc. Very nice! I forgot his name, but he had curly blonde hair. (If you read this, Hi! And thank you). In addition, an instructor, Ted, who works there also offered me a free first lesson and have been taking lessons since then. The people there are all welcoming and have a real passion for what they do. It's always fun going by their store. Check it out! Please respect their bag policy if you are asked to leave it with them while you are in the store... if you don't feel comfortable, then leave your guitar at home. Easy.

Six full steps (one octave) down from standard tuning. The Low E has the same fundamental frequency as a bass guitar, essentially the same standard tuning as a bass guitar but with a high B and E added to mimic a regular guitar. This tuning is used on the Fender Bass VI and similar instruments. Notably used by John Lennon with The Beatles, Robert Smith of The Cure and Jack Bruce of Cream. In his early days with Ronnie Hawkins, future Band bassist Rick Danko was also seen with a Fender Bass VI. This is the tuning Earth used on their seminal drone doom album, Earth 2. Also used in some Doom Metal and Sludge Metal bands such as Thou.

I just thought you'd like to know that Takamine produced for other names. I've just bought a 1973 Wayne which has a Takamine label inside stating it was made for Wayne. Its a Takamine 375 thats a Martin D35 copy. Wayne were guitar makers in Melbourne Australia in the 1950s and 60s and began importing under their name briefly in the 70s. It sounds amazing.
Compressor effects help you control the volume variations of your guitar. The compressor basically makes the loud parts softer and the quiet parts louder. This can help you fatten up the sound of your guitar as the overall sound will have much more sustain and often the low-end becomes more pronounced. Some compressor pedals are also sold as sustain pedals, which certainly does give a clearer idea of one of the ways the effect can be used.  
Taylor Guitars is an American guitar brand based in California. The company was founded in the mid 1970’s, and it has since grown into one of the largest and most respected acoustic guitar companies. Taylor guitars are recognized for their incredible quality, craftsmanship, and innovation, while still being an accessible guitar at a reasonable price.
I'm not sure if the same applies to LPs, but on my BC Rich Mockingbird (which has the same tone/volume setup) if one volume knob is all the way off it'll only mute the guitar in the center position. Say the bridge volume is at 10 and the neck is at 0, I'll still get sound if the bridge pickup is selected but I won't get sound if both or just the neck are selected.
One cheaper ampless option mentioned in the article is the Tech 21 Fly Rig used with pedals in front of it – I actually got a $270 Tech 21 RK5 (very close to being the same thing as the Fly Rig 5 mentioned in the article, but the Richie Kotzen signature version with his signature OMG distortion replacing the “Plexi” OD which is on the Fly Rig 5). I’ve used it direct into a cheap PA at practice and it doesn’t sound good to me that way – however, it sounds really pretty good going into an amp, which is what I did for a set-up-quick-and-get-out-after-playing hour-long gig a few weeks ago, plugging into an amp provided at the place we played at. It still didn’t come close sound-wise to my relatively cheap amp setup (hybrid Marshall JMD 50 watt head into Marshall 1960A 4 x 12 cabinet, no additional effects), but a lot more portable of course. So maybe I need to experiment with adding OD pedals to the RK5 for an improvement in sound.
So when you plugged your guitar in and tried to play it electrified, you couldn't get any bass tone out of the guitar-the bass strings didn't go over the polepieces of the pickups! When you tried to fret notes along the low E string, your fingers would fall off of the fretboard. That one error turned an otherwise beautiful, comfortable and very functional instrument into something that played and sounded like crap.

Working with Dimebag Darrell Abbot, Rex Brown, Mike Scaccia, Scott Shelby and others, this guitar master has had to work overtime to keep up with these guitarslingers' abuse. These guys make their guitars scream on stage, and it's King's job to make them sing again. "Everbody knows -- other than Scott -- that they're at my mercy when it comes to working on their guitar," he says. "That's why I'm not out on the circuit. I'm pretty picky about which guitar players I work with." (Although Darrel and Mike are no longer with us - may they ignite heaven with their notes - Scott is still tearing it up with Warbeast.) Rabid Flesh Eater, Warbeast, Rigor Mortis, Pantera, this guy has worked on some brutal guitars. "If you're going to buy a Cadillac, put the right parts on it" is one of his mottoes.

The other switches you might find on a guitar can change the wiring of the pickups from being in series or parallel , or to switch the phase so the pickups are in phase, or out of phase. All the switches are there to allow you to change the tone of the guitar.  Those switches can be toggle switches, or push-pull switches built into the volume or tone control knobs.
For me, the hardest part of mixing is getting the vocals to sit properly. There are a lot of tricks you can apply that can help, but I think one of the most useful is to send the vocal to a bus and insert a compressor there, with a high ratio of around 10:1 or more. Set a low threshold, and a medium attack and release, then, in the next slot, load a distortion plug-in with a warmish sound. Use high- and low-pass filters, set to around 100Hz and 5KHz respectively, and mix a small amount back in alongside the lead vocals. You don't need to add much — it should be almost 'subliminal' — but it can really help to fit the vocal in the track. Nicholas Rowland

Potentiometers (Pots) for audio are used to adjust tone and volume. Pots are resistors with three terminals and a sliding contact (the wiper) that creates an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are most commonly used as control devices, such as volume control on audio equipment. A potentiometer for Audio applications would feature very low to no introduced noise.

There is one musical virtuoso whom I would added to this list, if for no other reason then the fact that the 2nd guitarist on the list thru his comment, seemed to hand the title as “greatest guitatist on earth” to this guy. This same individual has often been compared to the one who holds the crown- Jimi. And yet, arguably should not be in this list due to the fact that he was much more than a Master of the guitar, he mastered vurtually over 30 other instruments he played, sold almost Every concert he performed world wide, and… Read more »
We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
Unfortunately there’s not really any good way to get around that issue. You can get strings that ease the pain on your fingers, like Elixirs or D’addarios that are coated but as for the guitar itself you’re going to have to tough it out and build up your callouses and endurance/tolerance. I had the same problem with my fingers, it would happen after playing for longer than an hour usual but over time it went away and now my fingers are rough and hardened. It’s worth the effort and pain, enjoy!
Jamplay is a large YouTube Channel featuring all levels of guitar lessons from the very basic, beginners’ guides to expert levels and, of course, some videos that dissect popular songs or styles down to the last finger and fret. It has big range of different players and “teachers”, so if you maybe find one guy a bit hard to understand or perhaps you don’t quite connect with his style, look around and you’ll soon find someone else.
The 700-series guitars had all controls and pickups mounted on a faux-tortise shell pickguard. That makes it very easy to do any required work on the electronics. By contrast, On the 800-series, with a couple of exceptions, the tone and volume control pots and the jack socket are mounted to the body, a three-way pickup switch, and a lead/rhythm slide switch are mounted to the pickguard; and the pickups are mounted to individual little mounting plates made of the faux-tortise shell material.
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.

The Squier Affinity series is a great beginner instrument. All of the bodies & necks have been CNC manufactured, so they are consistent and solidly built. In recent years, Fender has completely re-hauled the Squier series of instruments to make them decent introductory level instruments, at a great introductory cost to the beginner player. You can choose from Strats, Teles and even Jazzmaster style guitars!
{ "thumbImageID": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "defaultDisplayName": "Schecter Guitar Research Hellraiser C-1 with Floyd Rose Sustaniac Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51361806818304", "price": "1,099.00", "regularPrice": "1,099.00", "msrpPrice": "1,549.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry-1361806818304.gc", "skuImageId": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Listing the initial six harmonics of the G note, this open-G tuning was used by Joni Mitchell for "Electricity", "For the Roses", and "Hunter (The Good Samaritan)".[9] It was also used by Mick Ralphs for "Hey Hey" on Bad Company's debut album.[5] and on the Meowtain song "Alleyway" Stone Gossard also used this tuning in the song "Daughter" by Pearl Jam.
The neck, which extends from the guitar body, includes the fretboard and headstock on which the tuners are mounted. It contains a metal truss rod that prevents neck bowing and twisting, and can be adjusted to help the guitar maintain consistent pitch. The fretboard is usually made from a thin layer of rosewood or ebony, although some models, usually with maple necks, have a fretboard made of the same wood as the neck. Most fretboards have position dots or other markers inlaid in the fretboard. Some models have markers on the upper edge of the fretboard offering the player easy visibility.
A younger, but very high-quality brand that's also a favorite among country artists, Taylor manufactures some truly investment-worthy acoustic guitars—with a sound that only improves over time. Its creator, Bob Taylor, tested the use of exotic tonewoods in excellent guitars, so he used oak recovered from pallet wood to craft the back, sides, and neck of the Pallet Guitar, an important model originally made in 1995. Taylor's roster of tonewoods also includes Indian Rosewood, African Ebony, Blackheart Sassafras, Blackwood, Cocobolo, Figured Walnut, Granadillo, Hawaiian Koa, Maple, Ovangkol, Sapele, Tropical Mahogany, and several others.
When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).

To tell you the truth, in the first few years i started playing, after i learned the use of the switch, I was approach by a man that also a guitarist and asked, "YOur guitar sounds good, I believe it so expensive". Well, I bought the guitar only for $150 dollars, But, I toggled the switch to the right pickup on the right time, makes my guitar sounds like an expensive guitar.

There are continuous debates on various topics that I am often asked to contribute to with my opinion. I usually decline, because it’s rarely important what my opinion is when it comes to the instruments I produce – it has to be the musician’s opinion that counts. So let’s start by the question “Which tonewood is the best” and just answer it with “The tonewood that gives the musician the sound and feeling he or she is after” and then we can leave it at that.
Single coil pickups utilize a single magnet. They also typically have a lower output than humbucking pickups, which means they aren’t capable of producing as much distortion as a humbucker equipped guitar. However, because they’re not intended to be used with extreme levels of distortion they have a very rich and musical voice when played with lower amounts of gain.
The rhythm of a guitar itself leaves many of us awestruck. Though many a time, beginners have this question of how to play guitar tabs. Practically they are easy, but need a lot of practice. Nothing that's worthy comes easy in this world! There are some easy guitar lesson tabs which when practiced, can help to learn the instrument faster. Let's scroll through some of these easy acoustic guitar tabs for beginners, and enjoy the experience of these guitar lessons. To become a really good guitar player, it is essential that one knows how to read guitar music sheets.
I’m starting at guitar too at sixty years old, my opinion is that it’s not the guitar, but the time put into practicing, you can dup any type of sound with the features from amps, and guitar processors. You can even make an electric guitar sound like an acoustic. I purchased a line 6 150 watt amp, and a processor from line six, and I can dup any type of guitar sound. I built my own guitar
When Rolling Stone founder Jann S. Wenner asked John Lennon how he rated himself as a guitarist, Lennon replied, "I'm not technically good, but I can make it fucking howl and move. I was rhythm guitarist. It's an important job. I can make a band drive." It is, and he did: Lennon was the Beatles' spark plug and bloodletter, often adding rawness to pristine pop songs. Listen to the airborne strums that power "Help!," the circular riffage of "Day Tripper" or the deceptively sloppy "The Ballad of John and Yoko" – where, with George Harrison away on holiday, Lennon turned rudimentary lead and rhythm lines into sharptoothed magic. He was also capable of generating a truly ferocious tone: In the live promo clip for "Revolution," Lennon makes his hollow-body Epiphone Casino screech like a very angry lawn mower. Still, he didn't get his due as a guitarist in the Beatles' heyday. "They call George the invisible singer," Lennon said. "I am the invisible guitar player."

Kingston guitars were built in Japan and imported into the U.S. by Jack Westheimer, who was an early pioneer of importing and distributing Japanese instruments during the late 1950s and 1960s. At first, Kingston guitar models were limited to acoustics that were similar in style to Harmony’s Stella line. Westheimer’s electric line at the time was built in Japan by Teisco and branded as such before the name changed to Teisco Del Ray. By the mid-1960s, however, Westheimer was no longer importing Teisco (or Teisco Del Ray) guitars, and he turned his attention back to the Kingston trademark, but added electric guitars this time.

Just in Folks Here we have a super nice 2- pointer Mandolin ... Just Gorgeous Sunburst finish made and she is over 40 years ago and in SUPERB Players and cosmetic condition This Mando has some serious CHOP tone and is JVG Rated at Excellent Vintage and she is ready to Record or Tour TONIGHT! Get this rare Japanese Crafted beauty before she's gone... JUST IN! Ready to buy? ... EMAIL Joe : .
Three full steps from standard tuning. Used by Dream Theater, Adema, Asking Alexandria on From Death to Destiny and The Black, Boris, Cannibal Corpse, Morbid Angel (on several songs starting with their album Covenant), Father Befouled, Sepultura, Jeff Hanneman of Slayer (on "War Zone" and "Here Comes the Pain" from God Hates Us All and "Not Of This God" from World Painted Blood. Kerry King used a 7-string for those songs), Mutoid Man (Stephen Brodsky started using the tuning during the recording of the Helium Head EP to fill in the low end of the sound, in an attempt to make up for their lack of a bassist at the time), American Head Charge, Nickelback (on "This Means War" and "Gotta Get Me Some" from " Here and Now" and Nevermore (when band switched to 7 strings).
I’m not sure if you’re right about Joe being wrong. My memory of exactly how tone controls are usually wired is kind of failing me, but I think I remember that what you’re saying would be true if the output was taken from the node connected to the capacitor, but it’s not–the output node is the node on the opposite end of the tone pot from the capacitor, unless I’m remembering wrong. I think that filter-characteristics of guitar tone circuits are easier to visualize if you imagine them as reacting to a current source. Meaning “a big resistor in series with a capacitor” reacts the same way that “a big resistor” does. Basically, current above the cutoff frequency is shunted to ground through the tone pot–so if the tone pot is high, very little percentage (compared to if it was just a capacitor) of this current gets shunted, whereas if the tone pot is low, a high percentage gets shunted.

With that in mind, we would like to preface this article with the statement that a certain body style doesn’t necessarily mean that the guitar will be a good fit for the genre it’s associated with. However, we have also included some info on pickups. With knowledge on how the combination of pickups and a guitar’s body style impacts your end tone you should be ready to start shopping!
Dive bomb is a guitar technique in which the tremolo bar is used to rapidly lower the pitch of a note, creating a sound considered to be similar to a bomb dropping. One of the most recognized pioneers of this technique is Jimi Hendrix. Other notable musicians who are widely known for using this technique are Eddie Van Halen and Joe Satriani. - winner333

David Gilmour: Two models of Gilmour’s famous “The Black Strat” are available from the Fender Custom Shop: One is an American ’69 Strat body with an ’83 remake C-shaped ’57 RI maple neck (labeled as New old stock) with electronic and cosmetic modifications. The other is a”relic” style guitar that replicates the “The Black Strat” down to every scratch and dent. The relic version has two completely different coats of paint, just like the original.[16]

"Of course using effects pedals isn't cheating. I personally would define cheating as using corrective technology of some sort to falsify an artist's performance/musical ability, and I don't think that's what using pedals do. They're used for creative purposes, to manipulate sounds for artistic effect and suit personal tastes/whatever suits the mood of a song. They expand the range of timbres you can get from only using one instrument.
With two decades of experience and thousands of local customers served I found myself unemployed/downsized in 2010 asking myself what I wanted to do next. After some searching I understood that I really enjoy the interaction that takes place in the local store between the customer and the shopkeeper. I know that we can offer the same prices as the big stores and hopefully make the experience more enjoyable.
Jump up ^ Hicks, Michael (2000). Sixties Rock: Garage, Psychedelic, and Other Satisfactions. University of Illinois Press. p. 18. ISBN 0-252-06915-3. While most of the documentation on early fuzz boxes has been discarded or lost, the earliest such devices appear to have been introduced in 1962. The best known from that year was the Maestro Fuzztone FZ-1...
Another aspect of the jazz guitar style is the use of stylistically appropriate ornaments, such as grace notes, slides, and muted notes. Each subgenre or era of jazz has different ornaments that are part of the style of that subgenre or era. Jazz guitarists usually learn the appropriate ornamenting styles by listening to prominent recordings from a given style or jazz era. Some jazz guitarists also borrow ornamentation techniques from other jazz instruments, such as Wes Montgomery's borrowing of playing melodies in parallel octaves, which is a jazz piano technique. Jazz guitarists also have to learn how to add in passing tones, use "guide tones" and chord tones from the chord progression to structure their improvisations.
Similar to five-string bass guitar tuning, seven-string tuning allows for the extra string a fourth lower than the original sixth string. This allows for the note range of B standard tuning without transposing E standard guitar chords down two and a half steps down. Baritone 7-string guitars are available which features a longer scale-length allowing it to be tuned to a lower range.
The Applause line is relevant because the technology used to make the aluminum and foam necks was subsequently applied to Ovation’s final American-made solidbodies, the Ultra Kaman or UK II, which was introduced in 1979. The UK II featured an aluminum frame with a urethane foam (Urelite) body, featuring the usual Ovation shape but with a little Tele-style curve on the upper shoulder and a sharp single cutaway. The top featured a contour like a carved top, although it was molded, of course. The neck was typically Ovation, with a bound 24-fret ebony fingerboard. Pickups had changed to twin-blade humbuckers, still in the smaller Ovation size. Electronics were fairly conventional, with a three-way select, two volume and two tone controls. No reference materials are available to me, but it appears that the earliest UK IIs had a little Les-Paul-style elevated pickguard and hollow bow-tie inlays. Also, the early UK IIs seem to have the plastic and metal bridge assemblies seen on earlier Preachers and Vipers. Later versions have the notched abalone block inlays, no pickguard and all-metal bridge assemblies. This is what makes me think the switch to metal bridges occurred in around 1980. As far as I know, the model name never appeared on the pickguard!
OK, I’ve put a new set of strings on now. We’re now going to carry out the following steps, just like we did in the general electric guitar setup post. 1. Check and adjust neck bow (how straight the neck is) 2. Check and adjust saddle height 3. Check and adjust the intonation (how far back or forward the saddles need to sit at the bridge to keep your guitar as in tune as possible no matter what fret you’re playing)
Hello. I am trying to find out more about my Hohner electric guitar. I've been trying to research it online but cannot find ANY information or reference to this particular model. Some people have told me that it may have been a prototype sample that never went into production. The only reference number I can find on the guitar is a label that says Sample by Nanyo CG300G and Made in Japan. I bought this guitar around 1980-1982 when I was 13-15 years old and it is still in mint condition. I would really love to know more about it's origin.
I have owned a Mesa Boogie Dual Rectifier for 5 years now and couldn't be happier! Granted, the amp took a long time to dial in my perfect tone, but it was a good way to familiarize yourself with the amp. If you want cleans, crunch, distortion, and a wall of gain that is big enough to destory small islands than this is the perfect amp. Not to mention, the customer service is out of this world! About a month after purchasing the amp Mesa Boogie called to make sure everything was okay and I was enjoying the amp. They also ask you to take a questionnaire on how the sales person performed. Great company, Best amps.

I'm not sure if the same applies to LPs, but on my BC Rich Mockingbird (which has the same tone/volume setup) if one volume knob is all the way off it'll only mute the guitar in the center position. Say the bridge volume is at 10 and the neck is at 0, I'll still get sound if the bridge pickup is selected but I won't get sound if both or just the neck are selected.
Alder used to be very popular in the 1950s and 1960s, and many Fender guitars from that era are made from Alder. Today it is a bit more expensive of a wood, relatively, and isn’t as common. It is lightweight, has beautiful grain patterns, and gives a warm sound with plenty of highs. An instrument made from Alder is likely to have less midrange and bass than instruments made from other types of wood.
The conservative way to tell if a Martin is built for steel strings is the bridge. If it's a style 18 or higher and has a belly bridge (and does not have 'banjo' tuners like early OM models), it's pretty much built for steel strings (can't use this indicator on style 17 and lower as these models never used a belly brige until the 1950s). Why? Since Martin didn't implement the belly bridge until late 1929, it's a very conservative indicator that the guitar is built for steel. The belly bridge was the last thing they did to make steel strings usable on their guitars (though certainly many models with rectangle bridges can handle steel strings too.) They started to implement the belly bridge in 1929, and all style 18 models and higher had the belly bridge by 1930. Therefore using the belly bridge as a steel string indicator is a very safe idea (assuming the bridge is original and it's not an OM). Now can steel strings be used on pre-1930 models with a pyramid or rectangle bridge? Maybe, but it's just not as definative and caution should be heeded ("silk and steel" strings would be a good and safe compromise). Note early OM models with banjo style tuners generally should be strung up 'lightly'.
Im sure are techs at these stores that aren't bad AT ALL, but when you don't know who they are, I wouldn't trust them with a truss rod while you're not there standing over trheir shoulder watching them. I may just be paranoid, but hey, better safe than sorry is the way I look at it. I've done my own setups. And I plan to keep doing it until the day comes when I order myself a custom bass that I worked my ass off for, then I'll be willing to spend $50 on a 'properly' done setup. I dunno
The AF75 also has an ART-1 bridge and a VT60 tailpiece for increased resonance, improved tuning stability, greater sustain and an enhanced tone. It is also equipped with Classic Elite humbucking pickups at the neck and bridge, producing a rich and nuanced tone with just the right low-end heft. Tone shaping is an easy affair with the Sure Grip III control knobs, which are designed for non-slip, precise control.
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: ibanez","reportSuiteIds":"guitarcenterprod","pageName":"[gc] shop by brand: ibanez","eVar3":"shop","prop2":"[gc] shop by brand: ibanez","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop by brand: ibanez","events":"event1,event31","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"ibanez","prop5":"[gc] shop by brand: ibanez","prop6":"[gc] shop by brand: ibanez","prop3":"[gc] shop by brand: ibanez","prop4":"[gc] shop by brand: ibanez","eVar1":"ibanez","prop9":"2875","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section","prop8":"ibanez"}

If you’re recording or practicing at home, or you think your own amplifier sounds like garbage you’ll enjoy the Cab Sim switch. This when activated, causes your signal to simulate the sound of a mic'd up guitar cabinet rather than your direct amp signal, which is extremely useful when you want high quality recordings at home direct to a DAW, or you just can’t seem to make your amplifier sound good!
Maple » Maple is usually used for sides and backs, because its low response rate and internal damping doesn't add coloration to the natural tone of the top wood. It produces a “dry” sound that emphasizes high-end tones. Its lower resonance makes it great for live settings, especially with a band, because it can still be heard through a mix of instruments with less feedback.
The XB-40, (short for Extreme bending-40 reeds), is unlike any other diatonic made. Released in 2003, it was specifically designed by harmonica specialist Rick Epping to simplify proficient bending of the notes. To make this possible, the XB-40 uses forty reeds as opposed to the usual twenty found in most ten-hole diatonics. With these bending capabilities, the XB-40 gives access to all the notes on the chromatic scale through bending the natural tones of each hole. This model was discontinued in 2013. Shortly before production officially ceased, Suzuki Music released a similar model the SUB-30.[28]
We specialize in the repair and restoration of stringed instruments and Guitar repair in Nashville, and the surrounding area. Our services provide for stringed instrument repair and maintenance  of all makes and models.  We also sell stringed instrument related accessories. Contact us for all of your repair and restoration needs. We love rescuing injured instruments, and helping them make music again.
It has always amused me that one of the great tempests in the teapot of guitardom has been the legendary “lawsuit” of the 1970s. You know, when Norlin (aka Gibson) sued Elger (aka Hoshino, aka Ibanez) in 1977 over trademark infringement based upon “copying” Gibson’s headstock design. There are tons of ironies in this story, but one of the most amusing aspects is that companies such as Gibson have been one of the most egregious copyists of its own guitars over the years. Witness the Korean-made Epiphone Firebird 500 seen here.
Why do these genres not require the use of a tone knob, or sometimes, require a tone knob to be fully open? Well, for metal and hard rock, first of all, most of the tone shaping happens on the amp and/or on the pedals, especially for those who use high gain distortion pedals. The pickups on typical hard rock and metal guitars are humbuckers, which are warmer and have less treble. Couple that with high gain and high output pickups which compress the signal and also take some of the treble away, and keeping the tone knob open becomes that much important so that the tone will not be muddy and keep its cut and punch. For country, well, I guess that’s just *the* sound of the genre, and wide open Telecasters and Stratocasters are the weapons of choice.
Description: Guitar Type: Bass - Body: Maple & Mahogany - Figured - Body Construction: Solid - Top Wood: Cocobolo (Nicaraguan Rosewood) - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: 24 - Inlay: White Dot - # of Strings: 4 - Headstock: 2+2 - Bridge: Adjustable - Bridge Construction: Carbon Fiber (Graphite) - Cutaway: Single - Hardware: Gold, 1x Volume Control - Pickup Configuration: Dual - String Instrument Finish: Oil
Guitar straps may be small, but they play a big role in your performance and comfort level during gigs or practice sessions. A top quality strap keeps your axe securely in place while you're shredding on stage, and reduces stress on the arm and shoulder. More than simply functional, guitar straps add a decorative look to your stage presence to complement your own personal vibe. To that end, El Dorado offers a variety of stylish, durable guitar straps to add to your accessory collection, allowing you to spend less time wrangling straps and more time focusing on the more important task of making awesome music.
For beginners looking to practice their first notes, chords and songs, nothing more than a couple of watts is needed – in fact, most dedicated practice amps won’t offer much more than 10 watts. If you are planning on jamming with a full band or starting to gig in small venues (think bars, clubs and small halls), then anything from 15 to 50 watts will suffice. Bigger gigs, including auditoriums and outdoor festivals, will demand upwards of 100 watts.
The Guild Starfire V Electric guitar is a deluxe cutaway with loads of outstanding features that gives a fully expressive voice to the user’s playing style and taste. Designed as a semi-hollow electric guitar, the Guild Starfire V features a beautiful thin line body with little twin Guild LB-1bucker pickups that make it suitable for rock, blues, roots and a lot of other variety of music styles.

In 1972, Ovation introduced one of the first production solid-body electric-guitars with active electronics, the Ovation Breadwinner. The model failed to gain widespread popularity, however, and production of the Breadwinner and the Ovation Deacon ceased in 1980. Ovation made several other solid-body models up until the mid 1980s.[28] Since that time the company’s main focus has been acoustic and acoustic-electric guitars.

I have had some truly “nightmare” scenarios with repair people in my time, and you must beware of these folks who love to take your money, but who can totally botch a repair job on a nice guitar! It’s happened often enough to me to make me be very careful whenever I am “trying out” a new repair shop for guitar-related problems. Due to this, I often like to start with bringing them some relatively un-complicated guitar repair problems such as fret jobs and wiring problems, but even these have sometimes turned into nightmares. Today for example, I brought of all things, 3 Lap Steels and one semi-hollow guitar for repairs, but unfortunately the store’s repair guy was not there. We had a good communication though, and they made sure I wrote down the repairs I felt were needed, with a separate sheet for each instrument, and said that he’d be calling me with any questions regarding the guitars and their repairs before tearing into them!
{ "thumbImageID": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "defaultDisplayName": "Epiphone Tom Delonge Signature ES-333 Semi-Hollow Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Stripe", "sku": "sku:site51273888006950", "price": "599.00", "regularPrice": "599.00", "msrpPrice": "999.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe-1273888006950.gc", "skuImageId": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Anyone who has a Tempest XII probably needs a pick guard. I have a 1966 which was in the case for much of the past forty years. The plastic apparently dried out and "shrunk," causing the two corners to pop off at the screws near the neck. Some guitar repair technicians are good at fabricating pick guards, but most are either woodcrafters or electronics geeks. Please advise how your search has gone. Maybe I'll replace mine, too. RED
The early Silvertone electric guitars were made by Harmony and Danelectro, with a few exceptions. Danelectro had been making amplifiers since the 1940's for Sears, Epiphone and it's own brand. Their manufacturing facility was in Neptune New Jersey. The Dano's started mainly with the infamous "U" series which had the Lipstick pickups and "Coke-bottle" headstocks. Jimmy Page, Jimi Hendrix and many other rock stars got started and continue to play the Dano's. Aside from the very first Danelectros for Sears they all had the Lipstick pickups. That's how you can tell a Dano from the other manufacturers. Danelectro also manufactured the infamous "amp-in-case" models of which I have two examples: a 1964 and a 1968. If you want more info on Dano's go here.
You don't have to use plug-ins! Some synths such as the Virus TI have very flexible effects built in. You don't have to create audio effects in your sequencer. For example, I use the Access Virus synth, which features a simple delay effect, with the added bonus that all its parameters are available in the modulation matrix. One favourite trick involves routing velocity to the delay colour parameter. For parts that get brighter with increased velocity, it adds extra animation and bite if the echoes also get brighter. Unusually, the Virus also features four-way audio panning, so you can position an audio signal anywhere between the main stereo outputs and a second pair. If the second pair of outputs is routed to an external effects unit, you can play with the concept of moving a note around in a space, where its position also determines the treatment it gets. More fun can be had by modulating reverb time and colour via an LFO. The same LFO can then be used to control filter cutoff, EQ frequency and maybe wavetable position too (if your Virus is a TI). In this way, timbral changes happen at the same time as effect changes. Paul Nagle
A Squier strat is a killer starter instrument (it has the looks, playability, and classic style beginners are looking for). But the guitar itself is only part of the journey when learning an instrument. Especially with electric guitar, you’ll need things such as a small practice amp, a strap, a case, some picks and more. Thankfully, companies such as Fender now cater to the first-time buyers with all-inclusive packs that house a pretty solid guitar along with some great beginner gear to get you jamming. The Strat in this pack gives you three single coil pickups for that crisp, bright, clear sound, a five-way selector switch for all the classic Strat options, as well as a fulcrum-based tremolo to add nice depth to your playing. But the pack includes a lot more than just the guitar.
As I look at all the guitars you fellows have its a pleasure to see so many . to bad I live to far to visit Indianapolis IN .I have a 3/4 Stella that is about 69 years old that I got when I was about ...4 years old . Uncle John Hinson gave it to me for Christmas and I played the heck out of it. At about 12 years old I played in a theater here and was called Mevis Fresley . Rock and Roll and Country . So much fun I had for about a year then Momma and Dad said I had to quit as I was getting to popular, Oh well it was fun while it lasted.. Haven't met Pat Stockdale in person but that child can play a pretty Guitar. Good luck to you all Betty McLevey See More
I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?

There were differences between the pickups as well – the National had slanted units under enormous covers, while the Supro featured 8-string versions of the Alnico V pickups found on many Spanish-style guitars. The difference in tone proved to be minimal. The Supro has a more refined sound than its cheaper cousins with the famous string-through pickup, but it can still be raw and biting when required. Although it is a single-coil pickup, it has excellent hum rejection and sounds wonderful either overdriven or clean. The guitar has plenty of sustain and a surprising level of output, making it an excellent instrument for rock and roll as well as country music.

The original guitar recording preamp was almost certainly the Scholtz Rockman, but within a few years we had several sophisticated competitors (from Sansamp, Groove Tubes and Mesa Boogie) using both solid-state analogue and tube circuitry. These all include speaker emulation of some kind, though usually offer few or no effects. On the whole they are easy to use and some produce excellent results, though they have less tonal flexibility than digital systems designed to model the characteristics of a range of specific commercial amplifier and speaker combinations.
The #1 cause of fret wear is the fretting hand pressure exerted by the player.  I have some clients that grip very tightly and wear frets quickly (Rob Fahey), and some that grip very lightly and take forever to exhibit significant wear (Jasan Stepp, Dog Fashion Disco/PolkaDot Cadaver).  Fret material hardness, string hardness and frequency of use all contribute to wear as well, but hand pressure is still the leading cause since frets do not wear themselves out.  Technique is different for every player, unique and personal and habits can be hard to change.  Just like brakes in a car, how hard and how much something is driven directly impacts wear and longevity.  Please see the refrets page for further thoughts on this topic.

Yamaha’s also excel in terms of their playability, which is an especially important characteristic for beginners. Too many players sacrifice quality to save money on their first guitar, with the result being that they now have to deal with difficult playability that poses extra challenges to the learning process and can sour the learner’s experience with the new instrument. Yamaha offers an enticing balance between cost and quality.
• Wrap around: On wrap around tailpieces, what’s wrapping around is the string. Strings are slid into the tailpiece from the front and then pass over the back and top of the bridge before making their journey up the neck. This system creates less string tension. Some players report tuning and intonation issues with these tailpieces. Others swear by them.

The Gibson ES-335 certainly had an alluring appeal in the mid 1900’s, and it’s easy to see why. With a beautiful Arched top, lovely smooth curves and a tone that can knock your socks off, and a beautiful white binding, these truly are beautiful guitars. Whether you want to play some classic blues, or dip into some catchy jazz, this guitar is sure to impress.

Tribute Legacy Electric Guitar Candy Apple Red Rosewood Fretboard. The G&L Legacy blends contemporary refinements from the Leo Fender-designed S-500 and Comanche models with classic Alnico V pickups. If your holy grail is faithful Alnico single-coil tone with modern refinements and superb craftsmanship, the Legacy makes for an excellent choice. The Legacy's vintage-spec CLF-100 Alnico V pickups have that unmistakable chime and quack reminiscent of the best examples from the late ˜50s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo's private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D engineer at another company when he was tasked with finding out what was so special about the early bolt-on guitars many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail guitars, spending time out on the shop floor talking to builders still working in the pickup department since the ˜50s, all on a quest to discover where the real mojo was - and wasn't. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming down that old production line varied considerably. That meant coming up with the right specs for the Legacy pickups was more challenging than simply following the prints. Gagon's persistence paid off as the Legacy garnered rave reviews from both players and magazines like Guitar Player and Guitar World. This axe is no slave to the past, however, starting with Leo's PTB (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What's more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy is...
Even if you are on a budget, it’s always worth looking in the higher price brackets and considering something a little more expensive, which will offer better sound quality (which is always encouraging), better build quality (usually more comfortable to hold and play), looks cooler (which will keep you motivated), and will last you longer – allowing you to grow with the guitar. It’s best to buy at the top end of what you can afford. For additional inspiration, make sure to check out this electric guitar list.
I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!

Slightly ahead of the curve, in 1980 Ibanez revived its Destroyer as the Destroyer II Series. Indeed, the Destroyer’s “goosebeak” headstock shape would soon become the company’s trademark head. These first Destroyer IIs came in a variety of options and included bolt- and set-neck models that evolved over the next four years. The set-neck models had bound flamed maple tops over mahogany bodies and are exceptionally fine guitars. In ’84, the series introduced the high-end set-neck DT-555 Phil Collen Model, named for the fiery Def Leppard lead guitarist and modeled a little more after the Dean ML that had debuted in ’78, a kind of hybrid of the Explorer and Flying V shapes – basically an Explorer with a V notch in the butt.

“What’s the best multi-effects pedal?” is a question that comes up again and again in guitar and bass forums and discussions, and for good reason! There are a lot of multi-effect pedals out there, with prices and features varying drastically from model to model. With multi-effects pedals, it’s a little bit different than something like distortion pedals. With distortion, there might be 50 different manufacturers each making a single distortion pedal. With multi-effects, there are only around 5 major manufacturers (Zoom, Line 6, Boss, DigiTech, TC Electronic), but they each make 10 models of multi-effect pedals. This can make choosing the best one tough for beginners and advanced players alike. Luckily, we’re here to help, and after a ton of research and play testing, we’ll help you decide what the best multi-effects pedals on the market are, no matter your budget and needs.

I have a question you might be able to help me with. I currently have a Yamaha silent guitar both nylon and steel and want to set up a home speaker system for a small room. I use a couple of pedals with my guitar. (reverb & delay) and at present use a Yamaha THR amp for sound. This is great for practice but does not fill the room so to speak. I have a larger acoustic amp but not happy with the sound. Can I use a pair of studio monitor speakers instead and if so would I need anything else e.g. (EQ or amp)I am looking to recreate the best possible sound I can get. At present it is only through my headphones. Any help or advice with this would be greatly appreciated.
Here we have a Faithful Recreation of the classic Martin D-18 that was well crafted in Japan over 33 years ago. This is an excellent vintage Japanese guitar as it has been well taken care of all these years And has spent its years in California in the perfect climate to preserve the guitars original structural and cosmetic integrity its fit and finish to this day is still JVG rated at very good to excellent with no cracks or finish checking none – clean and still shines like glass….. its 1-11/16ths at the nut neck is a nice comfortable medium slim profile, neck is straight with correct amount of slight relief, action is good medium low and plays with ease and sound is clear and volume is good, tone is vintage sweet from its Aged tone woods. This is a true Lawsuit model as it has the direct image shape & size of the vintage Martin it copies is is a very cool D-18 guitar, its 33 years it’s obviously not new or mint but is surely vintage beautiful with its age and genuine warmth & patina and yes a few minor doinks but nothing to detract from its overall appeal. .
Many arguments can be made for Peej’s gifted lead guitarist (and corn-dogging, cheese-mongering Stevie Ray Vaughan acolyte) Mike McCready, but it’s Gossard whose songwriting and toothsome licks propelled the Seattle grunge icons early, record-setting releases. The winsome chords of both “Daughter” and “Black,” the white-knuckle smash of “Animal” or “Deep” or “Do the Evolution” — all were anchored by Gossard, a quiet type more invested in classic-rock craft than classic-rock showmanship.
One problem with adding a tweeter to a bass speaker cabinet is that the tweeter may be damaged by the overdriven amplifier tone that is popular in some musical genres, since overdriving the amplifier adds a great deal of high frequency information to the signal. Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets produced by manufacturers such as Gallien-Krueger and Carvin and other manufacturers allow bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn, which prevents this problem. Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
According to Harmony’s 1963 price list, the H1213 Archtone sold for $37.75. If we take inflation into account, this same guitar would actually sell for around $270 today. This is roughly the same price for most entry-level acoustic guitars these days, but the two main differences are that the H1213 is an archtop and it was made in the US (most modern entry-level acoustics are flattops produced in Asia).
The solid body electric guitar is the most common body type and is made from a solid slab of wood. Solid body guitars can range from a simple, single-pickup model, to an ornately figured and decorated, multi-pickup instrument with a slew of electronic options. Although solid-body guitars don’t produce as much resonance as hollow-body models, the woods used still have an impact on the instrument’s sound.
As the author of the article, I don’t use an Axe-Fx, but a $250 Fly Rig. But if I want to talk to an expert on modeling, I wanted to ask the company that knows it best. Sure, you have to take in to consideration a PA, but you have to do that if you own an amp too, since proper sound sends keeps the volume lower on stage to send everything through the PA.
The best guitars?  Look at what the best players use.  Certainly Gibson and Fender are in the mix, but these are typically priceless, early production or highly customized one-off units.  If you want something more or less off the shelf that is in the same range of build, tone and feel quality look at the following (BTW, you can't get these at Guitar Center, which is probably why they haven't been mentioned yet):

Depending on how you count them, there are 23 types of guitar pedals out there that can take you from "just another guitar player" to being that guy with the definitive tone and stage presence that everyone knows of around town. The only problem is it's a lot to wade through. But we've got you covered with quick summaries of what each pedal does, examples you can hear, and some visual examples for each of the guitar pedal types...

That is not always the case with acoustic electric ones, especially with piezoelectric pickups since they pump out a relatively high amplitude signal. All you really need is a small DI box that will attenuate the signal a little, and you plug the guitar straight into a mixer. Naturally, how good this is going to sound will depend on your guitar's preamp.
There are two main types of pickup you’ll find on a guitar suitable for beginners: a single-coil pickup and a humbucker pickup. Without bogging you down in the details of how they work, the single-coil is the classic original pickup, which typically offers a bright and sparkly sound. As they cut through the mix, single-coils are excellent pickups for lead players. Then comes the faithful humbucker, which – as the name suggests – ‘bucks’ the hum, meaning less background noise. Humbuckers produce full, meaty sounds found across the world of rock and metal, and are great for lead and rhythm guitar. However you can still play fast punk rock powerchords with a single-coil, just like you can play an upbeat country number with a humbucker! You’ll usually find two or three pickups on a guitar, although some models will offer just one. Guitars with two or more pickups will come fitted with a pickup selector switch to quickly change between them.
Unlike the Gio model of Ibanez included in their guitar package that only has two humbuckers for pick-ups. The GRX70QA has the three pick-ups configuration made popular by Ibanez consisting of neck humbucker, middle single-coil, and humbucker for the bridge. This pick-up combination goes well with the 5-way switching controls, volume and tone, to harness the sound esteemed for the kind of play.
Hi Dan! Thanks for the kind words! As somewhat of a newbie, you may find a semi-hollow-body guitar more flexible and versatile, especially if you are still finding trying to figure out what genre you are going to focus on. If you are set on the hollow-body go for, but ,if you are on the fence, the versatility of the guitar is something to consider. Those are my thoughts. Good luck!

yea, i’ve looked on a lot of websites. The way the 5-way switch is explained here helps a lot. Actually, the Dimarzio site has the closest wiring schematic that I’ve seen. I tried it and I got 2 out of the 5 positions to work. The problem is that all 3 pickups are running on both the working settings, just the bridge is more defined on the one setting and the neck is more defined on the other.
Vintage Gibson Les Paul Special model, introduced in 1955 This 1957 model is killer.Utilizing the Junior’s solid Mahogany body with single cutaway shape but  finished in what Gibson called Limed Mahogany which appeared white on black and white television sets which gives it the nickname of "TV Special"A neck pickup with accompanying volume and tone circuitry was also added making the Special an affordable but still professionally playable instrument. The Special was sold in this configuration until 1958 . Gibson’s surviving shipping records indicate approx. 1,452 Les Paul Specials were shipped in 1957. MORE HERE.

This guitar has a mahogany neck topped by a 20-fret rosewood fingerboard. It has a scale length of 25.62", while the nut width is 1.69". Since the AW54 is from Ibanez, you can expect the neck profile, string action and overall playability to be comfortable and beginner friendly. Wrapping up this affordable guitar's premium-like specs is its Open Pore Natural finish, which gives the instrument an earthy appeal that's easy on the eyes.
The Fender CC-60SCE acoustic-electric guitar combines the powerful onboard electronics with classic Fender tone and the comfort of their longstanding craftsmanship. The smaller concert body features a solid spruce top, mahogany back and sides, and "Easy-To-Play" neck, making it a perfect choice for beginning to intermediate level players looking to take the next step in their music. 

The primary starting point for information about Martin guitars is, of course, Martin Guitars: A History by Mike Longworth, one-time pearl inlaying ace and former company historian (4 Maples Press, Minisink Hills, PA). Longworth’s book chronicles the company’s history in very personal terms and provides wonderfully rich detail about Martin’s many guitars through the ages. It should be an essential part of any Martin lover’s library.

If you just want one or two instruments from a large SoundFont then follow this procedure.  Open the large multi-instrument SoundFont in Polyphone, then select File, New, Name the new SoundFont.  Go to the Presets of the original SoundFont, Left-Click the Preset you want and then holding down the Left mouse button then drag it to the Presets of the new SoundFont and let go of the button (the preset is now inside your new SoundFont).  Right-Click on the main heading of the original SoundFont and choose Close File.  Now simply choose File, Save (or Save As), Close.
For his work on Supernatural, Glenn Kolotkin turned to elaborate multi-miking as a way of managing Carlos Santana's complicated setup. "I used multiple microphones on Carlos' guitars: Electrovoice RE20s close, Neumann U47s further away, an SM56, U87s. He was playing through an assortment of amplifiers at the same time, and by using multiple microphones I was able to get just the right blend."
At the higher end of the market, you will definitely want to consider theGibson Memphis ES Les Paul Studio. A stunning marriage of the ES hollowbody and Les Paul solidbody shapes, this is a model that combines playability, power, sustain and tonal warmth to perfection. Equipped with ’57 Classic and Super ’57 Classic pickups and boasting solid construction throughout, the ES-Les Paul Studio is perfect for anything and everything you could imagine. Each model is supplied with a Gibson Memphis hardshell case to get you out and about in style.
In 1952, Alfred Dronge – co-owner of small New York City music shop Sagman & Dronge – registered the Guild Guitar Company. The following year, they began producing deep hollow body guitars, a reflection of Dronge’s love for jazz music. The brand grew steadily through to the 70s – when Alfred Dronge died unexpectedly in a plane crash – getting their instruments in the hands of musicians such as Buddy Guy, Muddy Waters, and Bonnie Raitt. In the 80s, Guild began producing signature guitars for musicians Hank Williams Jr. and Brian May of Queen. The brand moved around frequently and it wasn’t until 2014 that they settled in their present headquarters in Oxnard, California – where all of their line of USA made guitars are now produced. To this day, they still produce a wide variety of hollow, semi-hollow, and solid body guitars that look as beautiful as they sound.
The Lotus Vantage copy (Washburn Eagle, Aria Pro II Cardinal series, or Ibanez Artist) double cutaway (batwing) guitar with a solid body, 3 per side tuners on headstock, rosewood fingerboard with brass inlays, brass nut and neck-through construction (though there may have been a bolt-on model). This was usually finished in emerald green, polished mahogany or stained blue/white breadboard style and occasionally gloss white with 2 exposed humbucker pickups.
As you will note in the earliest catalogs, Ibanez guitars were first "copies" or "reproductions" of guitar models originated by several American guitar manufacturers and manufacturers from other countries. They were not forgeries, as they were never sold with misleading logos or with the intent to deceive. Ibanez models replicated such styles as the Gibson Les Paul, Fender Stratocaster and Telecaster, Rickkenbacker styles, and others. Due to their high quality, Ibanez guitars and those made under other brands, such as Greco and Aria, quickly earned a reputation around the world as quality instruments at a great value. There is a form of urban legend that circulates in the guitar community that has many variations, but usually involves either Gibson or Fender suing Ibanez, Aria, or some other Japanese manufacturer, with the intent to stop that company from manufacturing superior copies. The truth is less glamourous. Only one company ever sued another, and it was Norlin (the owner of the Gibson brand at the time) suing Hoshino (owner of the Ibanez brand) and the suit was focused only on the "open book" headstock shape common to Gibson guitars and replicated on the Ibanez guitars. The suit was brought in 1977, but by then Ibanez had already changed the headstock shape on its copy models, so the suit was settled out of court. No other company was ever sued by any other company. However, this episode has given rise to the term "lawsuit" guitar, which is used to describe any Japanese copy guitar made in the shape of an American manufacturer's model.
Gretsch: Here’s another company that has been making instruments for over 100 years. Of German descent, Gretsch was established in Brooklyn in 1883 by Friedrich Gretsch. The company didn’t start making guitars until the early 1950’s when electric guitars actually became popular. With origins on banjos and mandolins, Gretsch has always been big in the country market. The endorsement by Chet Atkins has helped further cement this. Another very popular endorsee, Brian Setzer, has helped Gretsch hollowbody guitars earn a rightful place in guitar history. Like Gibson and Fender, they also produce basses, acoustics and amplifiers. Furthermore, Gretsch has a hugely successful line of drums. In 2003, Grestch set up an agreement with Fender essentially handing over the control of manufacturing and distribution. Most Grestch’s tend to be up in the pricier range. For more affordable Gretschs, look into the Electromatic series.
Interesting site.I searched make before break and you appeared.Ive just bought a Squier Classic Vibe Butterscotch telecaster and it has stock Alnico 5 pups. It got me remembering how, back in the 1960s I used a standard U.S. Tele and did the jamming in between thing. If you were careful it balanced and held in place.I always loved that position. I think, if I remember correctly, you could get between bridge and both and also neck and both.I think it was a superior sound to any 5 way switch I’ve heard. Is it possible to modify my make after break classic vibe switch to make before break or do I need a new switch? And can you buy make before break switches for a 2 pup Tele ? Thanks much.Mike.U.K.
An expander is the opposite of a compressor. It stretches out the dynamic range of your signal allowing the quietest sounds to be even quieter and the loudest sounds to be louder. This can be useful in situations where you want quieter noises—such as squeaky fingering sounds—to become inaudible in the mix where they don't attract attention, while your intentional tones soar to the top.
I had gotten rid of all my effects pedals a long time ago because I wasn't using them. So when I saw this little processor and the price I thought I would give it a Try. I was amazed at all the sounds and tones this thing puts out. For the little money you spent it is deff. worth it. I have not yet messed around with the drum settings but I will. This will be loads of fun to play around with. A deff. 5 star rating.
Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials; for example, a guitar may have a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft-grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.