This great book of interviews is, in my opinion, one of only a handful of truly essential record-production books, and is packed with down-to-earth recording advice, as well as discussions of the art of production. In addition to the interviews I've referred to in this article, the book also features such greats as Glen Ballard, Arif Mardin, Brian Wilson, Phil Ramone, Mitchell Froom, George Martin and Geoff Emerick, and one of the strengths of Massey's approach is that he often asks them similar questions, which makes for interesting comparisons.
This is an absolutely stunning OM acoustic in MINT/As New Condition. This has been in my personal collection for a few years. In the words of Bill Kraus, the builder: An OM model in my favorite combination of woods: Red spruce top, Honduran rosewood back and sides, curly Koa bindings. I first heard about Bill Kraus from my good friend, Scott Freilich of Top Shelf Music in Buffalo, NY. Scott has been a factory authorized Martin repair center since 1979 and has seen the finest 6 figure pre-war Martins. Scott was raving about Bill Kraus, his knowledge of tonewoods, and the insane quality of his guitars. I also learned that Stan Jay of Mandolin Bros. was equally impressed with Kraus Guitars and had started carrying Bill’s guitars in his store. Every Kraus guitar at Mandolin Bros. has sold!
SJ Series: The SJ is Collings’ version of what is commonly called a small Jumbo. Although the 16 inch lower bout is slightly wider than a dreadnought, and the sides almost as deep, the tight curve at the waist creates in a very different sound chamber. SJs, especially examples in maple, typically have a more pronounced midrange response when compared to a dreadnought.
Unlike distortion or overdrive, fuzz is meant to not sound like an amp at all. It is meant to add harmonic content and transistor-like goodness to your tone. Fuzz boxes were used extensively in the 1960s to create an over the top distortion sound. Many times fuzzes will completely change the sound of your amp, so be careful and really focus on buying one that has the sonic makeup you are looking for. Hendrix, Cream-era Clapton, and Dan Auerbach are well known fuzz users.
This book teaches you how to visualize the notes, which will lead quickly to remembering them. Once you know where the notes are, forming chords becomes easier, which leads to fluid playing in any position. At the very least, if you can identify your root notes, you can bail yourself out of trouble at any time. That skill for resolution serves you in improvisation and the random jams that will provide much of your growth.
Bass amps come with a range of different input and output jacks, depending on the cost of the amplifier and its intended purpose. The least expensive practice amps may only have a single 1/4" input jack and no output jacks. Some practice amps and small combo amps have RCA or 1/8" inputs for plugging an MP3 player or CD player into the bass amp, to facilitate practicing with a recording. Some amps have a high-gain input, for basses which have internal preamplifiers one the instrument. The high-gain input is routed through a pad (attenuator). An amp may also have a low-gain input, which is unattenuated, for regular basses. Some combo amps have a 1/4" auxiliary input, which could be used to plug in a keyboard, drum machine or second bass.
Gibson seems to have the features that diminish the drawbacks in the Fenders series. The USA Company comes with the humbucker pickups that reduces the noise and humming concerns and produces a warm sound. This makes Gibson mainly fit for the rock players. Unlike Fender, Gibson guitars have a shorter scale length of approximately 24.75 inches. It decreases the string tension. Thus, the easy bending produces a warmer and smooth sound, which is characteristic for the brand. You can certainly go for a Gibson guitar to enjoy a Fender guitar quality on short strings. Additionally, the use of mahogany further jazzes up its performance.

The Kay guitar company's origins date back to the 1890's, starting with the Groeschel Mandolin Company of Chicago, Illinois. The company's name was changed to "Stromberg-Voisinet" in 1921, and shortlyafterwards, in 1923, Henry Kay "Hank" Kuhrmeyer (the origin of the name "Kay") joined the company and quickly worked his way up to the top. By 1928, Kuhrmeyer had bought the company and that same year the company started producing electric guitars and amps.

Richard Thompson has been one of rock's most dazzling stylists since his days with Fairport Convention, a British folk-rock band that veered into English traditional music. Shooting out life-affirming riffs amid lyrics that made you want to jump off a bridge, he combined a rock flatpick attack with speedy fingerpicking. His electric-guitar solos, rooted less in blues than in Celtic music, can be breathtaking, but his acoustic picking is just as killer; no one knows how many tears have been shed by players trying to nail "1952 Vincent Black Lightning."
The auctions continue on our eBay store, including last remaining production samples of several models, and other unique instruments, including made in Japan JP models, Triturador basses, Tony Campos Signature Tremor basses, acoustic guitars and accessories. Check out the current listings, there will be new items posted every week:
It’s ironic that Leo Fender, the creator of the most influential instrument in rock music, wasn’t actually a fan of rock ’n’ roll; he preferred country and western. But it goes to show you that once something new is out there, you can’t stop makers and players from reinventing it, adapting it for new purposes, taking it apart and putting it back together in new ways. The electric guitar is a prime example of unintended consequences. Initially, it just wanted to be a bit louder, but it ended up taking over and reinventing popular music and culture. Will we even recognize the sound of the electric guitar 10 or 20 years from now? I, for one, hope not.

The Fender Stratocaster features cutaway horns that give musicians access to higher frets. The back of the body is designed for comfort for longer performances. These guitars have three single coil pickups which transfer the string vibrations to the amplifier. They can all be turned on at once to produce a wide range of sounds. It also features a tremolo bar which allows you to lower or raise the pitch, much like tremolo pedals themselves, by pulling up or down on the bar to produce different effects. Stratocasters are the best option if you like to dabble in different playing styles and music genres.
This particular Duo-Jet belonged to a right-handed gentleman who had owned and played it upside down from 1971 to 2008. The Duo-Jet was Gretsch’s answer to the Gibson Les Paul Custom, and the overwhelming majority of these were black, with a sprinkling of Cadillac Green from 1956-1958. In addition, the single-cut Silver Jet 6129 was offered with some custom sparkle colors from 1954-1960. This guitar was refinished in Orange a long time ago, before the second to most previous owner acquired it in 1971.
Lee Ranaldo of Sonic Youth used a Kent Polaris I solid body (with lots of duct tape on it) and several Kent 800-series guitars - a white 820 and a sunburst 821 12-string with 10 strings on it, shown at left. Since the B and high-E strings on a 12-string set are normally tuned to the same note, he left the duplicate strings off. He uses several alternate tunings with his guitars.
This is another incredible right handed electric guitar from Cort guitars. It mostly comes in red color and has 6 strings. It has its body made of agathis and fret board from rosewood. The fret board is composed of up to 24 jumbo size frets. It is a sassy looking guitar that is quite affordable, with prices ranging from INR 9,999 to INR 10,050. Click below to get more information on the product.
• I like to insert a compressor after this, to add some sustain and even out the guitar's dynamics, for a more consistent distortion sound. So for the second insert slot, choose Dynamics/Vintage Compressor, then click on the insert's Edit button to see the compressor's interface, and set up the parameter values as desired. A good starting point would be Input at 17 and Attack at 8.9, with Punch and Auto set to On. You'll probably need to adjust the Input (effectively the Threshold in this case) according to the level of signal coming into the plug‑in. Set the Output to a level that's as high as possible, but doesn't approach clipping.
Ok so currently i run a Mesa 20/20 along with a GSP1101 and a MXR 10-Band EQ pedal. I love the MXR but would like to get a EQ in rack form. I see about a millon rack EQs out there but not sure which ones are made for guitar? They seem more focused on live sound/PA/Home recording..I am not sure if there all the same, Meaning a PA EQ will work for a guitar rack.

As a result of requests by audio engineers to reduce onstage volume, in the 2010s, in many large venues. much of the on-stage sound reaching the musicians now comes from the monitor speakers or in-ear monitors, not from the instrument amplifiers. Stacks of huge speaker cabinets and amplifiers are still used in concerts in some genres of music, especially heavy metal, but they tend to be used more for the visual effect than for sound reproduction.

Shecter is known for manufacturing quality rock and metal friendly guitars at reasonable price points, and I think that they use evil model names to keep their instruments from the hands of pop and ballad players. The Hellraiser C-1 FR-S showcases what this company can give metal players in the mid-tier price point, and with its name, it is obviously not meant for choirs and church music.
A lot of EBay sellers have been calling the Hagstrom solid-bodies of the time Hagstrom-Kent. They are not. If it says Hagstrom on the body, it’s a Hagstrom. If it is one of the Hagstrom guitars that was sold as a Kent, it’s a ‘Kent, made by Hagstrom’. I wonder if the sellers think they can get more for a guitar by associating the Kent name with it. I don’t see how. Perhaps the fact that there are so many Kents floating around, the sellers wanted a more familiar name to hang on the Hagstrom.
Longworth also illustrates yet another Martin amplifier offered in 1966, the SS-140. Again, little is known of this, except it’s a huge monster tower with a pair of side handles to help you hoist it. Both the appearance and prefix suggest it was solid state. The 140 might suggest the output wattage. It’s highly unlikely Martin only offered this one model, so there are probably a few other OEM Martin amps floating around.
STEM educators take part in a five-day institute focused on how to manufacture guitar parts for their classroom or for the nationwide network of schools that are implementing the project. Modularized curriculum with assessments will cover the content provided as part of the institute. The primary focus of the institute will be the application of CNC technology as it relates to manufacturing guitar components. The participants leave this institute with the modularized curriculum and a custom guitar body they have designed and fabricated. The additional parts necessary to complete the guitar are also provided.

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
The body of an acoustic guitar is composed of the top, also called the soundboard. The soundboard is supported by internal bracing; the sides, and the back that together form a hollow chamber. The upper body curves are referred to as the upper bout, while the usually larger lower body curves are called the lower bout. The area between them is referred to as the waist.

The EB-18 was a bass version with a 33.825″ scale. According to Longworth, early versions had a single DiMarzio “One” pickup and Grover Titan tuners, while later basses had a DiMarzio “G” pickup and Schaller pickups. Expect to find various combinations of those. Longworth also mentions the possibility that some might have Mighty Mite pickups, but this is uncertain. EB-18 production began in ’79 and about 5,226 (about 1,300 a year) were made until the guitar ended in early 1982.

Other handheld guitar and bass resonators on the market, manufactured under the tradename SRG, produced by Aescher Europa, in Germany, are available in both monophonic (one note at a time) and polyphonic (multiple notes at once) models, which include multiple onboard trigger switch effects, such as HPF (high pass filter) for enhancing harmonics and producing feedback effects, and LPF (low pass filter), producing a bass boost with a cello sound on heavy gauge strings. Later EBow models, such as the plus Ebow, contain a mode slide switch on the back, which allows the player to either produce just sustain or overtone feedback in addition to sustain.[69]
Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Originally, a signal would be recorded to two tape machines simultaneously. The playback-head output from these two recorders was then mixed together onto a third recorder. In this form, minute differences in the motor speeds of each machine would result in a phasing effect when the signals were combined. The “flange” effect originated when an engineer would literally put a finger on the flange, or rim of one of the tape reels so that the machine was slowed down, slipping out of sync by tiny degrees. A listener would hear a “drainpipe” sweeping effect as shifting sum-and-difference harmonics were created. When the operator removed his finger the tape sped up again, making the effect sweep back in the other direction.” Famous tunes using flange effects are “Unchained” by Van Halen, “Spirit of Radio” by Rush and “Bold as Love” by Jimi Hendrix. The flange on “Bold as Love” is credited as being the first recorded use of the effect in stereo.
As with other plucked instruments (such as the lute), the musician directly touches the strings (usually plucking) to produce the sound. This has important consequences: Different tone/timbre (of a single note) can be produced by plucking the string in different manners and in different positions. For example, plucking an open string will sound brighter than playing the same note(s) on a fretted position (which would have a warmer tone).

The best course of action is to set a budget that is reasonable - right at the get go - while also considering the cost for other important gear like accessories, cables, amplifiers and effects, should you need them. A good rule of thumb to follow is that entry-level to mid-tier instruments are great for beginners, while more experienced players will want mid-tier to premium guitars.
In this modern world of in-ear monitors and digital consoles, both guitarists’ amps face the back wall of the stage rather than forward toward the audience. This allows them to crank their amps as loud as they need to achieve their signature Skynyrd-like drive without blowing out the Front of House engineer or the first three rows of the arena they’re performing in.
I've been to Steve about a dozen times with my guitars, families and friends instruments and have sent several people there and have nothing but great things to say. He is reasonably priced and likely one of the most talented and experienced Luthier's in Boston. It's rare to see any establishment get 5 stars from so many people and Steve deserves it! Only thing is, if you're in a rush to get your instrument back, go somewhere else where they do it quickly and without much thought/TLC. Steve takes his time to do it right and has a lot of customers because he's the guy to go to in the greater Boston area. Highly recommend!
I always recommend the Cordoba C5 for beginners who are looking for their first classical or nylon string guitar. It’s comes at a very wallet-friendly price, but it sounds and plays exceptionally well for a guitar in its price range. More experienced players can look to other C-Series Cordoba guitars like the C12, which is built for advanced guitarists.
Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, CBS, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Ibanez, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, Winston
[SIZE="2"]Guitar Gear: Gibson '61 RI SG, Dean Cadillac Select, Charvel 475 Special, BC Rich NJ Bich, Gibson Faded V, MIM Strat, Warmoth Tele, LP Copy, Yamaha Acoustic, VHT Pittbull Fifty/ST, VOX VT30, Blackheart BH5H, '72 Hiwatt 4123 Cab, Traynor TS-50, POD XT, 16 ohm THD Hotplate, 80's Peavey Rage combo, Boss ME-50, Russian Big Muff, Graphic Fuzz

1. (n.) A sweet or agreeable succession of sounds.2. (n.) A rhythmical succession of single tones, ranging for the most part within a given key, and so related together as to form a musical whole, having the unity of what is technically called a musical thought, at once pleasing to the ear and characteristic in expression.3. (n.) The air or tune of a musical piece.
Here we have old "3-hole" this is another great Japanese Vintage Guitar! this one is over 40 years old wow! ...its wonderfully aged woods contribute to its rich great sound... this example is one of the greatest Martin style Copies from one of the finest "law Suit" Acoustic instrument builders of Japan Yamaha Nippon Gakki...This model is the very popular FG-140 RED LABEL ....JUST IN! more info soon to come please see the detailed pics of this guitar for a link to many more pictures ( 40 ) or more from every angle Very good- excellent condition If your wondering why we call this one "3-hole" is because someone in its past life had an electric pickup of some type and it came to us with 3 tinny holes in the top... we have since filled the 3-tiny holes one on upper treble bout and 2 below the rosewood bridge... we filled & clear coated so its all solid and is very hard to see but are their also a fine hairline crack threw the finish exists at the bottom of the neck the original owner said its been their more than 20 years and has not changed and is solid...if wanted after sale for free at your request fill sand it and fill with lacquer and sand and buff smooth I expect that would do the trick to cosmetically improve the look of that but its really fine as is... What is rare about this oldie but goodie its all original and even has the original gold lined Yamaha logo Hard shell case in pretty respectable shape too...see the extra pics ( I will have a link to those pics posted later ) for those details... Great sound and pretty EZ to play too I just Cleaned it to remove the grime but leave all the original patina and also dehydrated the woods and she drank it up and after drying we finished it of with a fresh coat of wax finish was applied the woods still shine like a shinny new dime.. great old guitar.. JVG Rated in Very good Original Vintage condition with its share of natural play ware visible upon closest inspection of the neck width is 1-3/4 @ nut and the action is set good at 3-16ths @ 12th fret.. the fretboard and frets still playing well no need for a refret some fret indentations yes but its still plays just fine at 80+%, top has aged naturally with nice Patina now and has several fine finish cracks etc..same as a well loved and played 40+ year old Martin would have at several thousand dollars less than a 40+ year old martin. This guitar has been restrung with New Martin Marquis Strings and sounds great...This one you have the option of buying an original vintage Yamaha Hard Shell Case..these cases are rare and hard to find now the handle was warn and has a replacement quick fix and it works perfectly...just $69.00 additional .

Vox is a musical equipment manufacturer founded in 1947 by Thomas Walter Jennings in Dartford, Kent, England. The company is most famous for making the Vox AC30 guitar amplifier, used by The Beatles, The Rolling Stones, The Kinks, The Yardbirds, Queen, Dire Straits, U2 and Radiohead, the Vox Continental electric organ, and a series of innovative electric guitars and bass guitars. Since 1992, Vox has been owned by the Japanese electronics firm Korg.
{ "thumbImageID": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "defaultDisplayName": "Ernie Ball Music Man StingRay 5 HH 5-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pace Car Blue Maple Neck", "sku": "sku:site51312645331323", "price": "1,699.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck-1312645331323.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "India Ivory Maple Fretboard", "sku": "sku:site51312645326641", "price": "1,749.00", "regularPrice": "2,049.00", "msrpPrice": "2,049.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard-1312645326641.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard/515512000007000", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

You have so many effects on this that you’ll find it difficult to get bored, all of which have been modelled on some of the most iconic sounds in effects pedal history including Boss, Line 6, Electro Harmonix, Z Vex and more. You have a huge amount of distortions, delays, reverbs, modulations, pitch/synth/filters, compressors/limiters, EQs, wahs, and even a looper to sculpt your sound with, all of which have been meticulously modelled to include the subtlest qualities and sound abnormalities that made these effects and their respective pedals so revered.
If you’re new to the world of guitar pedals, it can be a little daunting if you’re thinking to yourself “which guitar effects pedals do I need?”. Maybe you’ve bought your son or daughter a new guitar for Christmas or their birthday, or you’ve decided to really get serious when it comes to changing your sound up and you want to know where to start, what guitar effects pedals do and what sounds different guitar pedals make. Either way, we’re here to help with our handy guide to guitar effects pedals, complete with sound examples.
Dorado is a line of Japanese made guitars imported and sold by Gretsch in the 70's. I am looking for a 5965 which is the smaller of the steel string line, had a sunburst finish, sealed tuning pegs and an adjustable bridge. The market worth is between one and two hundred dollars depending ....... Please post if anyone knows of a real good one with original case.
In a way, the Ovation story (to use Robert Frost’s famous metaphor) is one of roads not taken. Of course, as the philosopher, Hegel, so neatly noted long ago, the paths tend to join up again, and the resulting synthesis works out fine in the end. It certainly worked that way for Charlie Kaman, whose choice of paths ultimately led to the synthesis (in more ways than one!) of Ovation guitars.
I also didn’t mention a tuner, but that’s because a tuner really isn’t an effect. If you use one, the ideal location is in the very front of the signal chain right after the guitar as you don’t want the signal going into the tuner processed by any effects that might affect the tuner’s accuracy. Even better, get a loop switcher with a separate tuner output that keeps the tuner entirely out of the signal chain until you need to use it and that will mute the signal so the audience doesn’t need to suffer while you make adjustments.
The "Chrome Edition" harmonica is also based upon the MS reed plates. Featuring a crystal glass comb and specially engraved chrome-plated anniversary cover plates. The bottom cover plate has the serial numbers from 1 to 1857. It is also packaged with an anniversary booklet. The "Standard Edition" model features a clear acrylic comb and the top cover plate is specially engraved.
“I was getting really bored with this guitar sound—or lack of an interesting sound,” Davies remembers. “There was this little radio spares shop up the road, and they had a little green amplifier in there next to the radios. An Elpico. I twiddled around with it and didn’t know what to do. I tried taking the wires going to the speaker and putting a jack plug on there and plugging it straight into my AC30. It kind of made a weird noise, but it wasn’t what I was looking for.
“Rock guitarists are incredibly conservative and traditional,” says Dr. Millard. “We like to think of ourselves breaking all the bonds and we go back to the fifties when rock and roll was revolutionary. It is not revolutionary. It is very traditional, very conservative, and musicians are really stubborn to change. We have a cultural understanding that old is better than good.”
Other than the old cranked amp or faulty preamp channel, these are the grandaddies of distortion devices. Fuzzes were also among the first of the transistorized guitar effects being built back in the early 1960s—which is no surprise when you discover the simplicity of most of them. It’s almost pointless to describe the sound of a vintage-style fuzz tone more than the name already does. They slather a slightly wooly, rounded, warm but sparkly distortion all over the guitar signal (see, you could just say “fuzzy”) to give more meat, girth, and sustain to the sound. More imposing units can be guilty of taking charge of the entire signal and bending it to their own synthetic demands—“brick-wall processing,” as Hendrix-approved effects builder Roger Mayer puts it himself (meaning your signal hits that wall and cannot pass through without a total transformation of its nature and character)—while those which many consider to be the more playable devices retain elements of your dynamics, touch, feel, and core tonality. In the case of “brick wall” type fuzzes, the resultant sound is still, usually, more processed and artificial than any of the preceding types of pedals in this category. The more dynamic fuzz pedals, however, are great for working with you and preserving the critical elements of your touch and tone. Turn a tube amp up to where it’s starting to break up and you’ve got gentle overdrive; crank it to the max and you’ve got heavy distortion. Pull out one of the pair of output tubes, use the wrong-value bias resistor on a preamp tube, or beat it senseless with a crowbar and you might just get it to sound like fuzz. It’s not a natural sound, but it can be a great one, and it’s a major part of many players’ signature tones.
Then, as the most popular version goes, a young, jack of all trades guitarist named Les Paul got tired of all that. So, he set out to create a guitar that could be heard just as much as the louder instruments. He fiddled with a lot of electronic means to boost his sound. Some worked better than others. His piece de resistance at the time would come to be known as "The Log". It looked like what you see up there on the left:
vintage harmony h75 hollow body guitar ser 519 1966, vintage 1950s vega odell model e130 hollow body electric guitar in case, vintage 1960s harmony h56 rocket hollowbody w hsc, vintage baldwin electric hollow body 12 string arch top awesome sound and player, vintage egmond hollowbody electric guitar gold foil pu make offer, vintage circa 1956 gibson es175 d hollowbody electric guitar white refin p90, vintage 1966 conqueror 335 shaped hollowbody sunburst arch top hh bigsby style, vintage vantage vsh455 hollowbody electric guitar with original case no reserve, vintage rare galanti hollowbody electric guitar super funky 1960s, vintage 1968 gibson usa johnny smith hollowbody guitar rare doublepickupwohsc, vintage 60s japan mij teisco del rey ep10t thinline hollowbody sharkfin guitar, 1966 harmony h74 hollowbody electric guitar original case clean vintage, vintage kapa series 500 hollowbody electric guitar amp; case usa, vintage bruno conqueror made in japan mij electric guitar hollow body , 1980 ibanez artist as200 vintage hollow body electric guitar, 1967 gibson usa es33512 vintage semihollowbody 12string electric guitar, vintage 1970 gibson es175d hollow body electric guitar, vintage hollowbody electric guitar harmony kay silvertone must see no reserve, 1964 gretsch tennessean 6119 vintage hollowbody electric guitar w bigsby , vintage experienced 1967 harmony h72 hollow body guitar, vintage circa 1967 framus atlantic 5113 semihollow body original cherry red , vintage original circa 1969 aria es335 copy semihollow body electric guitar, vintage 1966 baldwin burns vibraslim semihollow body guitar clean no reserve, awesome vintage hagstrom viking super rare 12 string hollow body w low action, beautiful vintage harmony h75 hollowbody electric guitar, vintage 1960s harmony silvertone model 1429l hollowbody electric guitar w ossc, vintage 1967 gretsch rally hollow body electric guitar bamboo yellow orig case, vintage 1961 epiphone broadway arch top hollow body electric guitar natural , vtg conrad brown sunburst electric guitar es 335 type hollow body wcase j0330, vintage 1970s ibanez model 2358 semihollowbody electric guitar al caiola copy, vintage 1988 gibson es335 jc showcase edition electric hollowbody guitar w case, rare vintage 60s egmond electric hollow body guitar from holland cool, vintage circa 1969 harmony rebel semihollowbody electric guitar sunburst ossc, vintage 1960s vox super lynx hollowbody electric guitar sounds amazing, vintage usa 1972 harmony rebel h81 hollowbody electric guitar near mint wtags, vintage 1954 gretsch 6186 clipper hollywood hollow body w case rare nice, vintage circa 1969 greco hollowbody double pickup electric guitar brown w ssc, vintage circa 1966 made in japan semihollow body electric guitar sunbust clean, 1967 vintage guitar aria diamond 1202t hollow body no case free shipping used, vintage 1966 harmony h59 rocket 3 hollow body red burst finish rare nice

You have 6 strings that are always made of metal. Then you have a number of pickups - these are actually magnets. Sometimes you can see a round magnet under each string. When a metal string vibrates over a magnet, a current is produced; this current is what ends up being converted into sound waves, but it is very weak. Thus you have to send it through an amplifier.
Guitarists and bassists who want to extend what their instruments are capable of have a huge arsenal of effects pedals and processors they can turn to. From subtle to outrageous, guitar and bass effects pedals and multiprocessors help you capture inspiring sounds off recordings as well as spark your own creativity. Keep reading to get the details on the many types of guitar and bass effects you’ll find at Musician’s Friend. We’ll also get up close with some completely unique stompboxes.
I myself own an Ashton and I think that they are overall really great guitars. I own an Ashton SL29CEQLTSB Acoustic Electric and it is simply amazing. It comes with a built in tuner and the strings last for quite a very long time. I have owned a couple guitars in my time and I am happy to say that the sound is impressing. So all of the other people who put down this guitar either know nothing about guitars, are super spoiled and want the best of the best, or just had bad luck with them.
The metal guitars that emerged in the 80's were simply geared towards people into metal, aesthetically geared that is, since all guitarists in every genre want guitars that are easy to play. Their main benefit was in introducing better tremolo systems - the locking nut and fine tuners on the trem so you didn't have to unlock the nut to make fine tuning adjustments. I had one on my Stratocaster, you could go nuts with the whammy bar and it would stay locked in tune.
Though Dennis Hartnett took good care of his ViVi-Tone instruments (mandola NMM 10809, mandocello NMM 10810, and this guitar), all three show signs of extensive use. Indentations on the bar-armature and wear to the screw-ends of the posts on the guitar pickup indicate that Hartnett also used the instrument for electric-only amplification, in addition to the electric/acoustic set up in which he left it. Hartnett's guitar is preserved with an amplifier (NMM 10812) by Webster Electric Company of Racine, Wisconsin, and an accompanying foot pedal.
Kay was indeed one of the earliest American manufacturers of electric guitars. Things progressed, and by 1934, the company was officially known as the "Kay Musical Instrument Company". The company became larger and more successful over the years, leading to the addition of a new factory in Elk Grove Village, Illinois in 1964. But somehow by 1965, the company had hit rough times and was bought by Seeburg, a jukebox manufacturer that sold Kay to Valco in 1967.
An EQ pedal has been designed to allow you to tune certain parameters of your sound such as the bass, middle and treble frequencies. They are predominantly used by more experienced guitarists who want to add or take away specific bands of sound. These are great for guitarists who want to really boost the treble, bring out the bass or just ensure their guitar signal sounds as flat as possible. The MXR M109S Six band EQ Pedal is one of our favourites.
“Take a humbucker wound with 42-gauge wire as a benchmark. With an Alnico II magnet, it would have a warm, soft bass response, a very sweet high end and a slightly pronounced mid- range. Alnico III, funnily enough, is not quite as strong as Alnico II. So, the highs tend to be more muted and rounded. Probably the best way to imagine the sound of Alnico III is to think of the early 1950s when this form of magnet was very common. Think of the sounds of the jazz and clean guitar tones from that time – that plummy roundness.
: : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!
{"id": "519377", "skuOrProductId": "519377", "categoryId":"site1AAG", "name":"Firebird Studio Electric Guitar", "pageUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"All the classic Firebird Studio elements--mahogany body, set mahogany neck, Alnico Classic 'buckers, chrome hardware, and stopbar tailpiece with a limited edition finish.", "value":"167.58", "priceMin":"167.58", "priceMax":"399.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"70", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}
Portable- you can carry them in one hand to jam with friends, take to your guitar lesson, or even play at a small party. The Fender “Frontman” 10 watt weighs only 8.5 pounds and brand new costs only $59. Another fun amp is the Danelectro “Honeytone” that only costs $19.99 and is equipped with a belt clip so you can walk or roller skate around while playing your guitar.
One other thing to note is during the 1960's there was a lot of consolidation in the Chicago guitar manufacturers. In the 1940's National and Dobro merged to form Valco. One of Valco's sub-brand's was Supro which sold guitars under the Sears moniker Silvertone but they also manufactured guitars for Montgomery Wards as the "Airline" brand (Jack White of the White Stripes plays an Airline "Layfayette" reso-glas guitar) and there were a few other house brands too. In 1968 the conglomerate Valco closed it's doors. Also in 1968 Danelectro was shut down by MCA which had purchased it in 1966. Kay also went out of business and the remains were bought by Teisco. The only major brand that survived the 1960's to continue making these amazing guitars through the early 1970's was Harmony. We believe that's because they were the largest of all guitar manufacturers in the 1960's.
But for all its light weight, this classical guitar shows off a stunning cedar top and rosewood fretboard. The inlay is just as elegant, and to keep the guitar’s profile looking good, the neck has a 3-ply construction style to prevent warping. The guitar has a matte finish, which gives it an “old-school” appearance, and the matte finish is great for photo sessions: no glare.
Clarence Leonidas “Leo” Fender was established this brand in 1946. The Fender Musical Instruments Corporation (FMIC) manufactures the stringed instruments and amplifiers, such as solid-body electric guitars, including the Stratocaster and the Telecaster. This brand is the kings of hearts and getting the popularity from blues to quick rock tempo. Fender’s Precision and Jazz Bass models are now considered to be the standard to which most other electric bass guitars are measured. It’s famous for best guitars which are made ever in the history.
The exciting thing about the Kemper is that you can use it to capture the sound of your JTM45, right where it hits that sweet spot, with the microphone you prefer and that mic preamp that just adds a certain something. Then you can refine the 'profile' you've made while A/B-ing the digital signal with the original using the Kemper's onboard EQ, and save the sound alongside the library of 200 or so profiles that comes pre-loaded, with access to hundreds more via the Rig Exchange section of the Kemper website. If you fancy a little more spice you can clean up or crank the KPA's onboard gain control to go way beyond the level of drive available on your original amp, adjust sag, tweak the audible effects of pick attack and even, thanks to what Kemper claims is "digital alchemy", alter the size of your virtual cabinet from a huge stack right down to a cigarette packet, while there's also a fully loaded set of effects. We've heard various approaches to digital modelling sound good in the studio before but this is as close to a 'real' mic'd valve amp sound as to be indistinguishable. If you're the type of guitarist who records regularly, or a producer who wants 24/7 access to a personal library of refined and tested guitar sounds wherever you happen to be on the planet at any given time, the Kemper Profiling Amp is the product of the decade so far.
When starting with the electric guitar, it’s not uncommon to look at experienced player’s pedal board and think “Wow, so many pedals, with different names – wonder what should I get”. And while everyone knows that the core of your sound comes from the sensibility of your touch, your guitar and your amplifier, it is also true that certain pedals can transform and shape your tone to make it more unique and personal. Before shelling out all your beloved savings on unnecessary pedals, take a look at this guide to understand the 10 basic pedals, the so-called “must-haves”. 
Some effects, and the boxes that produced them, altered musical periods beyond recognition. The valve-driven Watkins Copicat, for example, will forever be associated with the sound of the late 1950s British music “beat” scene. Developed by Charlie Watkins in 1958, this odd machine supported a tape-recording mechanism that would record and play back any sound with varying lengths of delay in-between the replay heads. The device was critical to the rockabilly sound of the late 1950s, the “beat-group” sound of The Shadows, and the Liverpool Merseybeat scene of early 1960s (as well as the Birminghambeat, or Brumbeat scene). The sensation of hearing a guitar warble and wail to its own output encouraged guitarists to experiment with different styles of attack and vigor. For example, the noise that begins and ends the original 1962 recording of “Telstar” by the Tornados was made using the Copicat by creating a loop of echo and reverb effects. This produced what can best be described as some sort of space-echo/attack-helicopter noise.
At first this may seem trivial, but a little experimentation reveals that each effect reacts very differently depending on how the original signal has been altered by previous effects in the signal chain. Initially, this can seem rather frustrating; a pedal that sounds awesome on its own can turn your sound into a real mess when combined thoughtlessly with other effects. I’m going to go into the basics of signal flow and cover the fundamentals of setting up a great sounding pedal board. As you would expect, there isn’t any one “correct” way of doing things. You may find that changing the order gives you a completely unique sound, and that’s great. However, if you’re sorting it all out for the first time, this is a good way to start ordering your pedalboard.

The guitar is also available in various packages with an amp and other accessories, such as this one that includes a Fender Frontman 10G amp, a cable, a strap, picks, and a tuner. Note, though, that Fender offers a truly awesome little amp with built-in effects, the Champion 20, for just a bit more. We strongly recommend spending a little extra and getting a Champion 20, which will give almost any guitarist practically any sound they can imagine with no need for effects pedals. Read more about the Champion 20 in our review of the best electric guitar amp for beginners.

Originally this effect used 1/4″ tape going round a machine like the Echoplex. It then recorded whatever you were playing and played it back to you a set time later.Since its launch in the 1950’s tape based delay started to appear in more and more recordings. Its saturated sound and imperfect repeats gave it some stunning character that is still loved today.Now tape is dwindling so most people have moved on to emulated digital pedals. These get close to the sound of an original tape unit without any of the added maintenance.
Every ZZ Top tour is a treat for guitar geeks, as Gibbons uses the occasions to unveil a six-string surprise. (Last year it was an elusive Gibson Moderne.) But what really makes Gibbons cool is a certain undefinable quality called “vibe.” Anyone who has ever met Billy and gotten to know him—however briefly—has an outrageous story to tell about the encounter.
Awesome amp. This one sounds awesome and is not ice picky like some I’ve Owened before. This one sounds awesome and is in great shape (see pics for condition, few drinks, but nothing noticeable u less u are super close). Unfortunately I am listing this and my Jonny marr Jaguar since I need cash. Will only sell one item. If my guitar sells, this will be unlisted
The guitar measures 41 inches in length, and it comes with a 25.75-inch scale and 20 frets for various playing techniques. You also get strong D’Addario strings for reliable performances every time, as well as enclosed die-cast gold tuners, so you never play an off note. This dreadnought guitar features a cutaway so you can easily practice finger techniques on the higher frets.
For the guitarist who's frequently on the road or often plays out, the pedalboard is an indispensable aid. Many pedalboards include custom-fitted travel cases or gig bags. With your effects already mounted on the pedalboard, performance setups are fast: just unpack the already-configured board, plug in your guitar and amplifier, and you're ready to play.
Now I’ve heard people say they can’t tell the difference between the two when they’ve played both. From a strictly tone perspective, that may or may not be true. And maybe for me it’s just the placebo effect (I know its a Gibson - or not - therefore I feel an ethereal change in quality), yet it seems awfully subjective to base a $2600 difference on a report that lacks concrete research.
Many people think that electric guitars are going to be loud when they are plugged in... well they can be, but they do have a volume control, so you can control the volume. Also, be aware that you do not have to plug them in! I do probably half of my practice on an electric guitar without an amp at all. It's good to get the notes ringing out loud and clear without an amp, so as a beginner you might want to put all your money into getting a cool guitar and leave getting an amp until later (these days there are some awesome software products and even smart phone apps that sound great!).
Almost every guitar you see on our website is available in our Chicago guitar showroom. While we carry hard-to-find, top of the line vintage guitars, Rock N Roll Vintage Guitar Shop also carries new guitars and basses from Fender (Squire), Martin, Seagull, Lakland, Hofner, Kay, Hanson, EGC, and other top brands. You can also find top of the line amps including Ampeg, Analog Outfitters, Divided By 13, Fender, Hi-Tone, Laney, Magnatone and Orange to name a few.
Most bass amps have only one rated wattage. A small number of amps, such as the Mesa/Boogie Strategy 88 amp head, have switchable wattage. A selector switch on the 88 enables the bassist to choose its full 465 watt power; half power (250 watts); or low power (125 watts). A bassist playing an arena on one night, then a club gig, and then recording in a studio could use full, half and low power for the different volume requirements. The Quilter 800 Bass Block has a "master control" knob which switches between various watt outputs for a similar approach.
Once you've mastered the intricacies of single-transducer miking, it's fun to start working in stereo. For true stereo recording, you need a matched mic pair as well as a twin-speaker amplifier, preferably one with built-in stereo chorus and vibrato (such as a vintage Magnatone or a Roland Jazz Chorus). Two separate amplifiers fed by the same stereo delay or multi-effects unit will also work.

Locking vibrato: Often referred to as a Floyd Rose bridge after its inventor, like the two-point rocking tremolo, it provides individual intonation and height adjustments. It rocks on two bolts in the top of the guitar and is spring-loaded. The difference is that it clamps down on the strings at both the bridge and head nut. The result is rock-solid tuning, even when the vibrato arm is used radically.
The guitar is hand-made by Martin's top luthiers, using exotic cocobolo wood for the back and sides, mixed with a more conventional solid sitka spruce top. As expected from a high-end instrument, this guitar features impressive visual appointments, most notable of which is its ivoroid binding, beautiful rosette and fretboard inlays. While its price tag and looks may push you to just hide this guitar in the closet, know that this instrument is built to make music in the road or in the studio. Martin employed modern bracing and construction techniques to ensure the guitar stays reliable, beautiful and great sounding for a long time. Those that are lucky enough to own this guitar have themselves a treasure that they can pass down to the next generation of players.

Edit: After reading everyone's comments I've decided to let the technician give my strat a first time setup and I'll try to absorb any information I can in order to be able to do it myself one day. I realize many of you have some pretty cool guitar shops that'll do a free setup so I'll try to negotiate something. I'll be sure to record the condition of the guitar itself before the setup in case the technician chips it or scratches it. I'll also check out Dan Erlewine's books like the guitarist below suggested. Thank you all for your advice, I really do appreciate it and I hope to be as wise as you all are when it comes to guitars someday.
Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
And while he'd heard its calling, Swank didn't move into the field until death arrived at the music shop where he was working. The resident guitar repairman suffered an aortic aneurysm and died. "It was terrible," Swank says. "He was a good friend of mine, but he still had a bunch of stuff in his shop." But Swank was able to step in and finish some of those jobs, and then more jobs began pouring in. The next thing he knew he had built a reputation for himself. "I'm a [guitar] player. I know how I like things to work, how instruments should play."
Ovation makes a great acoustic electric that is only $469. It has a spruce top with a lyracord bowl back. Some people don’t like the rounded back as it’s hard to keep it in your lap, so a strap may be needed if you should choose this guitar. The onboard pre amp has a built in tuner which makes staying in tune very simple. It’s nice not having to keep up with a separate tuning device. The reviews for this guitar are positive, citing great tone and playability. Click here for more information and pictures of this guitar.
Multi-effects units are exactly what the name implies—single units that offer many different effects and allow those effects to be used singly or in combinations simultaneously. Most will offer just about all the effect types discussed in this guide and many more. Typically they include dozens if not hundreds of effects presets—combinations of effects and effect parameters designed to achieve specific sounds with the touch of button or footswitch. Most also allow you to also save your presets for instant recall.
The long chord progression can be very intimidating, especially if you’re a beginning musician. Technically, you’re only dealing with four different chords, which are, A – G – D – A – F – G – A. Looking at it, it looks really scary, but if you listen to the chord changes on a piano or someone else playing a cover of the song, it seems less intimidating.

Capacitors are typically used as filters to control tone. In most cases, they are used to filter out very high frequencies before being sent to ground (the output jack) which controls the warmth of your guitar’s tone. Capacitors vary greatly and come in a range of materials from ceramic, film, paper and electrolytic (mainly used with active pickups).

The tuner goes first. This one is pretty easy. It doesn’t want to hear an effected signal; it wants to see the direct input from the guitar. Another reason for putting the tuner first is that if you’re using any true-bypass pedals, the TU-3 will give them a buffered signal, which will protect your tone from loss of signal in the cables when other pedals are off. This is another one of the reasons there as so many TU tuners in pedalboards worldwide, even ones using nothing else but boutique true-bypass stompers.
The Fender Stratocaster is one of the most iconic electric guitars in music history, and its equally distinctive sound is down to its selection of pickups. Although you’ll occasionally find a humbucker, traditionally a Strat will feature three single-coils – one each at the bridge, middle, and neck positions. They offer that sweet, bright, chiming single-coil sound that’s perfect for all styles of soulful music – from blues and country, to classic rock – and are perfect for lead guitarists, as they slice through even the densest mix. There are some excellent Stratocaster pickup sets around, although be sure to check out the Lace Sensor Blue-Silver-Red set on our chart for something with a little extra edge.
If you haven't tried a higher end Yairi then you have missed it. These are great hand crafted guitars with a very good neck and great sound. They are branded Alverez in the US but be sure it is one of the Yairi made. There are not lots of them made due the the complete hand crafted design. You don't find them in the music stores much but they should be there. I have owned one for many years and have yet to pick up any other guitar that can match it in my opinion

You have 6 strings that are always made of metal. Then you have a number of pickups - these are actually magnets. Sometimes you can see a round magnet under each string. When a metal string vibrates over a magnet, a current is produced; this current is what ends up being converted into sound waves, but it is very weak. Thus you have to send it through an amplifier.
wonderful feel of a small town, with caring people and the owner is amazing. He'll of a player too! Just got a gorgeous ESPN strat copy from him, he graciously showed me just how well of a strat it is... by playing it through a fender tweed tube amp. He even sang a little for me as he made my strat sing right along with him. Price was excellent, as are all his prices. See More
You wouldn’t guess that this is a low-end electric acoustic, even on close inspection, because the build quality is superb. This translates to some great tone. While it might not have quite the same ring and sustain as an expensive model, only real audiophiles are likely to notice. You get a solid spruce top, good quality hardware, and Fishman electronics.

Unfortunately, no reference materials were available for this early period, so we’ll make some educated guesses. Based on the evidence of the logo on the 1968 amplifier, we suspect Univox guitars with the plastic logo debuted at about the same time. By 1970, Univox was employing decal logos on some models, further corroborating this conclusion. If this assumption is correct, it would suggest that among the first Univox guitar was the Mosrite copy known later as the Hi Flyer, debuting in around 1968. This would be consistent with the evolution of “copies” in Japan. As the ’60s progressed, the Japanese were getting closer and closer to the idea of copying, producing guitars similar to their competitors, such as Italian EKOs and Burns Bisons, etc., finally imitating American Mosrite guitars in around ’68. The Japanese affection for Mosrites was no surprise, since the band most associated with Semi Moseley’s guitars was the Ventures, who were enormously popular in Japan.
The LGXT comes with 2 Seymour Duncan custom humbucker pickups that give it a classic electric guitar sound. The piezo pickup with custom preamp EQ makes it sound very much like an acoustic guitar. With the built-in synth pickup you can get just about any sound you want via a Roland GR series synth. It has a silver leaf maple solid body with a figured maple top and a mahogany neck with a richlite fingerboard on top which Godin says makes the action even better when using a synth. It has a full 25.5" scale length and 1.6875" nut width.
The first guitar developed was the K1 Series. Launched in 2000, this instrument had a dreadnought cutaway design and used inexpensive materials such as laminated spruce for tops, and sapele for back and sides. Kona Guitars then launched the K2 series after which it diversified, at present offering over 30 models of guitars, ukuleles, violins, and other instruments.
P good...So Fun...Like most console gamers, I have greatly enjoyed the "Arkham" Trilogy by Rocksteady Studios, I say that because I did not complete Arkham Origins (Dev by Warner Bros.), however I did beat that now infamouse Deathstrokeboss fight but after that the game felt very recylced and I told my self I would for next-gen Arkham installment by Rocksteady....I was a fan of all three Batman games that came out last gen. Arkham Knight changes the formula just enough to keep it fresh, along with amazing graphics (best water effects ever) and Dual Shock 4 controller options, I know I'll be playing this game for quite some time.
Buying an electric guitar is a very personal process, with many things to consider before you make your final choice. It’s not just a case of picking something with a nice color – you are usually parting with a substantial chunk of hard-earned cash, ranging anywhere from $100 to $2000 – or more – for some guitars, and therefore patience is required to find something that really suits you.

Many players today have more than one overdrive/distortion stomp box on their pedal boards and sometimes use both at once. My personal preference is to place the lower gain pedals in front of the higher gain ones, but the opposite is absolutely fine if you prefer the sound of that configuration. Placing overdrive/distortion pedals later in the signal chain can increase noise as the noise of several effects chained together can add up, and any noise produced by other effects going into an overdrive/distortion effect will be boosted along with the guitar signal.
A common misconception of the Lyle brand, among others, was that Norlin sued Matsumoku for copying their designs and shut them down. The actual lawsuit was indeed filed by Norlin, only not against Matsumoku but Elger/Hoshino--the American division of Ibanez--over elements of the Les Paul and SG guitar designs that Norlin/Gibson had since claimed as a trademark. The case was eventually settled out of court. Japanese companies preemptively altered the designs of their guitars in such a way that they would not be "exact" copies of Gibson guitars. The true story of the demise of the Lyle brand is largely unknown to this day.
I one day hope to be the man my dog thinks I am.WORDS OF WISDOM FROM VARIOUS MEMBERS"most often the guitar will rise or fall to the level of the player""people overthink ****************""Sometimes you gotta know when to shut the **************** up and have a little class. Not you, you're special.""If it sounds good to you then it sounds good"The bull**************** and myths in the guitar world are stacked very high.
Martin’s re-entry into electric manufacturing is related to the association of Richard (Dick) Boak with the C.F. Martin company. Dick Boak, with dreams of being a luthier and constantly working on guitar projects on his own, joined Martin in 1976 as a draftsman. In 1977 Boak was assigned to the project of designing an electric guitar for Martin. This resulted in the development of the E-18, EM-18 and EB-18 guitars and bass. The first prototypes of this new electric guitar series were produced in 1978, ten years after the demise of the GT-70/75, and production commenced in 1979 with guitar serial number 1000.
{"pageName":"[mf] pdp: gandl fullerton standard legacy electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"silver,36-month,60 month,24-month","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";L21430","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] product detail page"}
The Kay Musical Instrument Company grew from the Groeschel Mandolin Company (or Groeshl Instrument Company[8]) in Chicago, established in 1890.[9] In 1921, the company was renamed to Stromberg-Voisinet. In 1923, later president Henry Kay "Hank" Kuhrmeyer joined the company, and in 1928, with the help of an investor,[9] he bought the company and started producing electric guitars and amplifiers.[10]
The Fender Telecaster was developed by Leo Fender in Fullerton, California in 1950. In the period roughly between 1932 and 1949, several craftsmen and companies experimented with solid-body electric guitars, but none had made a significant impact on the market. Leo Fender’s Telecaster was the design that finally put the solid-body guitar on the map.
The new Martin electrics were offset double cutaway guitars which, in terms of shape, fall very loosely into a Stratocaster category. The cutaways are a bit wider and shallower than a Strat, both pointing away from the body. The horns are much more rounded than a Strat. Like a Strat, the waist is slightly offset, and the lower bout has a slightly asymmetrical slant to it. The bodies were initially built of hard maple and rosewood laminates that imitate the look of neck-through guitars popular at the time, but actually have neck pockets with glued-in mahogany necks. These had unbound 22-fret rosewood fingerboards, dot inlays and a distinctive three-and-three variation on the old Stauffer/Viennese headstock � which may have originally inspired Leo Fender’s Strat creation � with script CFM logo decal. (Prior to developing the Strat, Fender visited the Martin factory and was shown some of the old Stauffer/Martins with the round-hooked Eastern European headstock shape.) These all featured chrome Sperzel tuners, brass nuts, twin humbuckers, threeway selects, two volume and two tones with chrome dome knobs, and a Leo Quan Badass bridge.
For a very good price, you get a solid spruce top, mahogany back and sides, and a rosewood fingerboard with matching bridge - for elegant finger picking. The bracing on the inside of the body is scalloped for even better tone, which works very nicely indeed. There’s also a System 66 preamp system with 3-band EQ and a builtin tuner for precision. It’s all good quality, mid-range equipment making this a really great value proposition.
Still not ready to give up, in ’87 Ovation contracted with a Korean manufacturer to bring in a Celebrity line of solidbody electrics. These were Strat-style guitars again, with bolt-on necks, pointy/droopy six-in-line headstocks (with a bi-level carved relief along the bottom, per style), two-octave rosewood fingerboards, triangular flag inlays, and a double-locking vibrato system. We’re not sure what the pickup brand was, but there are models with two XK-110 single-coils and one XK-120 humbucker, plastic-covered with no exposed poles.

The world is full of guys who will zero in on all the details they find inferior about this guitar by noting the rather obvious fact that this is not a Gibson Les Paul Standard costing $3,000.00. There are some people who will complain that this guitar has a bolt on neck. True, the set necks of the more expensive Epiphones and Gibsons are nicer. But, considering the fact that every Fender Stratocaster ever made had a bolt on neck, is this really a big deal? Would Jimi Hendrix have played "Purple Haze" better if his Strat had a set in neck? Probably not.

Also shown in ’60s Bizarre Guitars, but not in the Teisco book photo, is a ca. 1954 Hawaiian Teisco EG-R which was sort of shaped like a Gibson and which had the same pickup as the J-1, with more elaborate symmetrical metal rocket shapes on the sides, housing the volume and tone controls. A chrome dome sat in front of the pickup between it and the dot-inlaid fingerboard. The head was stubby and rectangular. This was very “Moderne” looking, very Buck Rodgers.

In order to play your favorite song, you’ll need to learn guitar chords. Use the images and instructions below to learn how to play each chord. The ChordBuddy device can be used for assistance in knowing where to place your fingers In the images the circles represent where you will be placing your fingers (I=index, M=middle finger, R=ring finger, P=pinky). The X’s represent strings that you will not be strumming while the O represents strings that will be played without any frets.

In a way, the Ovation story (to use Robert Frost’s famous metaphor) is one of roads not taken. Of course, as the philosopher, Hegel, so neatly noted long ago, the paths tend to join up again, and the resulting synthesis works out fine in the end. It certainly worked that way for Charlie Kaman, whose choice of paths ultimately led to the synthesis (in more ways than one!) of Ovation guitars.

With a body shape that looks like it could have been cut out by hand using a saw in your garden shed, this Kay Old Kraftsman Sizzler guitar manages to be crude and quite fantastic at the same time. "Old Kraftsman" was actually a brandname used on Kay guitars sold by Spiegel stores. The maple neck gives it a rather Fender-like appearance, but this is in fact a set neck and not a bolt-on.
I love reading interviews with engineers and producers, but the more of them I read, the more I come up against the basic problem that my brain is like a sieve. I'm forever thinking to myself "I really must remember that technique", but unless I dash off and use it right away the knowledge just skips out of my ear and heads for the hills, probably glad to be free. And even if I vaguely remember reading a fascinating passage about de-essing nose-flutes, I'm damned if I can recall where I read it or who recommended it.
Delay – a time-based effect that sounds like an echoing of your guitar tone. A delay pedal creates a copy of your guitar tone that repeats like a fading echo. Delay pedals usually have a time knob that allows you to choose the time of the delay intervals, an effect level knob that controls the volume of the delayed sound and a feedback knob that controls how many repeats are sounded before the effect fades. See different types of Delay below:
Kasuga produced their own house brand in Kasuga guitars. For a brief period of time the company produced Yamaha acoustic guitars. Kasuga guitars were first sold in America in 1972. Unlike many Japanese manufacturers who outsourced their guitar production in other factories outside the main maker, Kasuga produced all their products in-house. Badged guitars known to have been made by Kasuga include Conrad, Emperador, ES-S, Ganson, Heerby, Hondo, Mei Mei and Roland. Kasuga went out of business in 1996.
Neck Construction – The neck part of the guitar includes the fretboard and headstock. The tuners are mounted on this part of the guitar. The width and profile of the neck affects the playability of the guitar. Most necks are either “C” or “U” shaped. In most cases, the fretboard is made from a thin layer of rosewood or ebony, but some guitars have maple necks. Fretboard have position dots and other inlaid markers that assist the player. There are generally 3 types of necks – bolt on, set neck and neck through.
Mr. Bojangles,Nitty Gritty Dirt Band, Leaving on a Jet Plane, John Denver, City of New Orleans,Steve Goodman, Alice’s Restaurant & Motorcycle song, Arlo Guthrie, Bobby McGee, Janis Joplin, Taxi, Harry Chapin, Please Come To Boston, Dave Loggins, Lady, Little River Band, Sailing, Christopher Cross, Lookin’ Out My Back Door, Credence Clear Water Revival.
If you plan to be the more lead-orientated guitarist, good for you. You’ll get more chicks and a higher place in the band pecking order. You shouldn’t however, neglect your chordal playing. A song can exist without lead lines, but not without rhythm. Don’t be fooled, every one of your guitar heroes is invariably a demon on rhythm guitar too. It’s a prerequisite: you have to understand the chords, rhythm, and harmony of a song before you can play any meaningful melody on top of it.
The Telecaster has also been a long-time favorite guitar for hot-rod customizing. Several variants of the guitar appeared throughout the years with a wide assortment of pickup configurations, such as a humbucker in the neck position, three single-coil pickups and even dual humbuckers with special wiring schemes. Fender offered hot-rodded Teles with such pickup configurations, the US Fat and Nashville B-Bender Telecasters around 1998. The Deluxe Blackout Tele was also equipped with 3 single-coil pickups, a “Strat-o-Tele” selector switch and a smaller headstock than a standard Telecaster. The most common variants of the standard two-pickup solid body Telecaster are the semi-hollow Thinline, the twin-humbuckerDeluxe—and the Custom, which replaced the neck single coil-pickup with a humbucking pickup. The Custom and Deluxe were introduced during the CBS period and reissues of both designs are currently offered.
This is a Japanese Fender Jaguar recorded on the both pickups setting direct in and also through a valve driven Fender reverb unit. This can be used with software amplifiers such as the free fender and marshall vst plugins on this forum (there are lots of software guitar amplifier and pedal related things worth downloading on the Guitar Amp Modelling forum) or amplifier impulse response files with your convolution reverbs like Jconv on Linux or Freeverb on Windows. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them.
Size & Weight: If the multi-effects pedal will stay in one place at all times, then perhaps size and weight is not a big deal. However, one of the biggest selling points of a unit like this is its portability. If you need to gig with it or simply take it to a friend’s house, make sure you’re fine with its dimensions. The good thing is that a manufacturer like Line 6 makes several versions of the same basic pedal. The Line 6 M13 is a great unit, but if you need it to be more compact you can opt for the M9, or smaller yet the M5.
Now, let’s consider the tone knobs. Eric Clapton was one of the first guitarists to realize the power within those unassuming plastic spinners. His famed “woman tone” sound during Cream relied on rolling the pots on his Gibson Les Paul Standard, SG or ES-335 all the way off and turning the treble and midrange of his superbly overdriven Marshall amps high. Similarly, jazz guitar players who are looking for a classic tone roll their pots back until they get in the Wes-Benson-Burrell-Pass-etc. zone.
The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
Next to the great sounds and looks, the most noticeable thing about Seagull guitars is the incredibly reasonable prices. With Seagull, you get a quality guitar made from superior woods and materials for a lot less than it seems like it ought to cost. The Performer CW Flame Maple is definitely one of the best acoustic-electric guitars under $1000 out there.
Our fretwork is one of the things we are most proud of. We go to the extreme to make sure that your guitar is going to play the best it can. The fingerboard is planed under tension. The fretting process is done with epoxy fretting. We use a special blend of epoxy that makes re-fretting very easy without messing up your fingerboard. This process is used for multiple reasons. One of the advantages to this type of fretting is that you lose the hollow gaps under the fret that you find with the traditional way of fretting. In traditional fretting, with each fret you put on, it is like driving a wedge into the fingerboard, which causes back tension on the neck. With epoxy fretting, all of these issues are eliminated. The epoxy under the frets helps to transfer string vibration throughout the neck to the body, and relieves all stress and tension on the neck that occurs with traditional fretting. This results in a stress-free neck, which allows the truss rod to work properly and to adjust the neck accurately.
Let’s start off with a guitar’s signal. As the driving force behind the entire effects chain, a guitar’s signal (more importantly, it’s voltage) must travel through the input cables and all of your effects pedals before it can reach the amp. As you can imagine, by the time a guitar’s signal finishes making its way all the way to the amp, the signal will undoubtedly suffer from a bit of degradation, losing its tone and body in the process. It's not your guitar's fault, it's simply the nature of electricity.
From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.
Referring to this setup, Leckie also explains more about what makes double-miking so powerful: "If you brighten up the U67, it's totally different to brightening up the SM58, so sometimes I'll add a little brightness to the 67 and a little compression. But between that combination, I find I can get pretty much everything I need. They're rarely used at equal level; sometimes I'll favour the SM58 with the U67 at 10-15dB down. Even 20-30dB down, just bringing it in, it's amazing the different colour you get — how much the tone of the guitar changes."
A direct line can be drawn from “Rumble” to “My Generation,” “Anarchy in the U.K.” and “Smells Like Teen Spirit.” The song is often credited as the origin of the power chord, but it also heralded the transformation of rock from the music of youth to the soundtrack of juvenile delinquency. Several radio stations banned “Rumble” because they thought it was too sexy, raunchy and violent. Wray even dressed like a juvenile delinquent, embellishing his greasy black pompadour with a leather jacket, jeans and shades at a time when most white rock and rollers still took fashion cues from Perry Como and Bing Crosby.
The first subject I concentrated on is (you guessed it) recording electric guitars. What became immediately apparent was that there was a huge range of different techniques being used, and also that there were strong differences of opinion between different professionals, which left the question 'who do I believe?' The only way I could answer that question was to put the different techniques into practice in the studio, and then A/B them to sort the sheep from the goats.
To create a thicker rhythm guitar sound, overdub the same part one or more times. Depending on the desired effect, the overdub can be treated as one mono signal and mixed to the same stereo position, or panned left and right for a stereo double-tracked sound. Alternatively, treat the original track with an ADT (Artificial Double Tracking) effect. This can be done with a digital delay set to around 40 milliseconds. Again, the delayed signal can be panned or mixed as one with the original guitar track.
too many to the point their incredibly over rated for me personally, there's a world outside of Gibson that cost a fracton as much and will blow peoples heads off. I have a custom 7 string I bought off craigslist someone made that's worth about 500 dollars because I didnt pay for some name on the headstock and so on. All my friends from blues and jazz lovers to metal would rather play my guitar. more frets for soloing than their les pauls active pickups a Floyd rose locking tuners 4 big reasons right there
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.

We think the reason this book is so good is because of its readability. That is, it starts very slowly in theory, and Tom does an excellent job of explaining the constructs of music theory in simple and understandable terms. From there, the concepts are set up in such a way that is easy to follow and very thorough. Mr. Kolb did a great job of laying out the sequence of the topics to make them understandable to someone picking up a guide to music theory for the first time.

We consider the finest tonewoods to be those with superior projection and sustain, and without weak or bright spots within the tonal range. Many of the wood species from the US Pacific NW meet this criteria, and more. Some were well known by luthiers, but others, like Myrtlewood, Claro, Franquette & Bastogne Walnut, Port Orford Cedar, Redwood, Pistachio, Olive, Osage Orange and Douglas Fir are just now gaining notoriety.
The construction allows the soundwaves to resonate freely within the body’s hollow airspace as well as around the violin-style F-holes and throughout the solid glue joints. Everything – from the body wood and construction to the neck wood and pitch – contributes to the tone of the 2019 Gibson ES-335 Figured guitar. This model boasts impressive depth and sustain in addition to an exceptional resonance that you can feel through the guitar’s body.
In May 1965 Keith Richards used a Gibson Maestro FZ-1 Fuzz-Tone to record "(I Can't Get No) Satisfaction".[24] The song's success greatly boosted sales of the device, and all available stock sold out by the end of 1965.[25] Other early fuzzboxes include the Mosrite FuzzRITE and Arbiter Group Fuzz Face used by Jimi Hendrix,[26] the Electro-Harmonix Big Muff Pi used by Hendrix and Carlos Santana,[27] and the Vox Tone Bender used by Paul McCartney to play fuzz bass on "Think for Yourself" and other Beatles recordings.[28]

This is the Autumn Brown El Dorado. The finish is outstanding, and it’s also very easy to handle at only 7 lbs. We used 24 extra fat frets. Dual humbuckers provide the sound, and it comes with a whammy bar. We used gold hardware to complement the nice finish. Like other Big Lou guitars, this one features our 1 7/8″ nut width and 8mm string spacing. The construction involves a “set” neck, so it can’t be swapped out, but the factory is ISO9001 certified, so this guitar is a very high quality instrument. Considering the price at $379, it’s a great value. I really tried to keep the cost down, but that arched top costs a small fortune to build. If you can make a statement by playing, that’s the best. But if your still in training, this guitar will make a statement just sitting there. I took the first one off the assembly line for myself. I had to have it.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: agile","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"martin","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
As you saw in the video, I’ve gone through the Learn and Master Guitar Setup course, and all in all, I think there is a lot of great content in there. Greg Voros teaches you the basics of guitar setup and maintenance, and he does it in a slow and detailed fashion so that even if you’re following along at home you should have no problem learning his guitar setup techniques. Keep reading for more information on the course.
I recently bought my first tube amp, the Marshall DSL40C, which has amazing sound for the money, but the reverb that came on it is virtually non-existent. So I started looking at reverb pedals.....who in their right mind would pay over $100 for an effects pedal that does one thing like a (Fender reverb or Hall of Fame or Holy Grail)? Then I cam across the Zoom Chorus/Delay/Reverb and almost bought it for $119 but then this popped up. With the nearly 5 star average review, I thought I would spend the extra $80 and try it out. WOW am I glad I did. Not only do I now have a great sounding reverb, but I have every other effect you can ever imagine (phaser, tremolo, chorus, delay, overdrive, distortion, filters, etc....the list goes on and on and on.

not even close. No offense but John Mayer is trash absolute trash. Jack White is decent but not a guitar god at all. This is my list, and I'm going to leave out every guitar player that came before the Beatles, not saying Chuck Berry or B.B. King couldn't shred, but I'm trying to relate to the modern idea of Rock and Roll. I'm also judging on a lot more than just ability to "shred". And to the one goon…Jimmy Page SHINED live, that was Led Zeppelins appeal, you felt like you were at the biggest show on Earth…you probably just watched a few videos on youtube from the end of the band's career when he was a herion addict.

You may love only one style of music. And that’s fine. But try playing some other styles. Funk maestro Carlos Alomar went through hell on David Bowie’s Scary Monsters (and Super Creeps) album, being asked to play more “grinding” guitar alongside Robert Fripp. “It was very interesting,” says Alomar. “I learned a lot and when I came back to my more natural style, I felt really fresh about it.”
A bit underrated and under the radar, Blackstar makes some superb amplifiers at a fraction of the cost you’ll find from bigger name brands. And while it’s a shame they don’t get more recognition, it’s good news for you, the user. This particular amp might just be the best option for apartment living – due to its small stature and low-level volume paired with the fact that it is still a tube amp. But don’t let the fact that it’s only 1-watt fool you – thanks to the simple truth that it uses tube amplification, it can still get plenty loud. Of course, if you’re overly concerned about noise, this option also comes with a headphone jack, and it’s one of the few tube amps to even offer that convenience.
Different types of equipment are used to amplify the electric bass and other bass instruments, depending on the performance setting, style of music, the sound desired by the bassist, the size of the venue and other factors, such as whether a bassist is an amateur or professional musician. Professional bassists are more likely to have expensive "boutique" amps and cabinets. All types of bass amps and cabinets are designed to be transportable to shows and recording studios, and as such, most have various features to protect the cabinet (e.g., metal or plastic corner protectors) and speakers (a plastic screen or metal grille) during transportation and move the equipment (a single carry handle is standard for practice amps and combo amps and two handles are sometimes provided for two-handed carrying of large cabinets, and wheels are mounted on some large combo amps and cabinets). Amplifier "heads" may be sold mounted in a wooden cabinet with a carrying handle, or they may be sold as rackmount-able components, which can be screw-mounted in a 19" road case for protection. The speaker enclosures for combo amps and speaker cabinets are typically covered in stiff vinyl, carpet, felt or other sturdy fabric, or painted.

When in doubt, reach for the Dummies guide. These standardized, annotated guides have taught countless people to do countless things that were once over their respective heads. Like the Hal Leonard complete guide above, this massive, 648 page door stop includes six different sub-books, including three basics volumes and three genre-specific guides. It’s the everything-to-everyone approach. It might be overwhelming, but at least you’ll have everything you need in one place.
The Afterneath gets a place on our favorites list, largely because of the "Drag" feature that allows you to sort of delay the decay of your reverb effect, giving off an ambiance that trails off behind each original note as it bleeds into new notes. It's a very unique reverb effect, which blends particularly nicely with a fretless bass in the example video below. 
10. Behringer Ultracoustic ACX450 45-watt ($229.99): Not to leave our acoustic-centric players out of the list entirely, the Behringer Ultracoustic not only looks amazing, but it has a ton of features to keep you inspired and sounding great. Two channels are utilized so while you plug your acoustic into channel one, channel two allows you to input a microphone or another source. The FBQ Feedback Indicators allow you to control the feedback coming out of your amp by monitoring the LEDs on the graphic EQ. Need your own guitar effects? The ACX450 allows for 16 different presets on each channel, including delay and reverb. A great bargain for those looking to take their acoustic playing to the next level!

Guitar from Spain is the best online store to buy the best spanish guitars online: Classical guitars, Flamenco Guitars, Acoustic Guitars and electro acoustic guitars made in Spain from the best spanish guitar makers at spanish local prices. These unique guitars will be delivered from our warehouse or from the manufacturer's bench to your door, avoiding extra costs or double margins. Because we only sell guitars from the most reputable Spanish manufacturers, you will be assured to buy only the best spanish guitars available with 2 years warranty and certified from origin. Spanish guitar brands like Alhambra Guitars, Raimundo Guitars, Ramirez Guitars, Admira Guitars, Camps Guitars, Rodriguez Guitars or Prudencio Saez Guitars are among the most reputable and best sounding guitars in the world. These guitars are manufactured in Spain, the land of the flamenco guitar and the classical guitar. At Guitar From Spain you can also buy steel stringed acoustic guitars, western guitars and electro acoustic guitars made with the same traditional craftsmanship and know how acquired through centuries of guitar making. We also have special guitars as Bandurria (Spanish mandolin), Laud (Spanish lute), Cuban tres, timple canario and special sized guitars as Cadete (guitar 3/4) Requinto (Guitar 1/2) and Senorita (Guitar 7/8). Compare our Spanish Guitars with any other "asian made guitars" at the same price and you will be amazed with the diference in quality and sound that you can get. Do not settle for imitations, buy the original, buy Guitars from Spain.

The twelve-string guitar is a simple variation of the normal six string design. Twelve-string guitars have six regular strings and a second set of thinner strings. Each string of the second set corresponds to the note of its regular string counterpart. The strings form pairs and therefore you play a twelve-string guitar in the same manner as you would a standard six-string.
The strings fitted to the guitar also have an influence on tone. Rock musicians often[when?] prefer the lightest gauge of roundwound string, which is easier to bend, while jazz musicians go for heavier, flatwound strings, which have a rich, dark sound. Steel, nickel, and cobalt are common string materials, and each gives a slightly different tone color.