Harmony almost wrote the book on guitars and responsible for so many rock stars. Youngsters all over the world ordered guitars from Sears, Montgomery Ward, and later by JC Penny. These affordable guitars are now very sort after and have become very expensive. Many of these models have been copied and reissued over the years. In their heyday, Harmony was the largest manufacture of guitars in the USA. In 1964-65 they sold over 350,000 instruments. The pickup used during and around those years were made by DeArmond Company. Today Vintage DeArmond Pups are still valued and sold. Look into years of bands, and you will find VIP's of the Rock World, with a Harmony in their hands.
Proceed to the next two chords. The next chord you would play would be a power chord on the fifth fret of A three times. So you would play with your index finger on the fifth fret of A, your middle finger on the seventh fret of D, and your ring finger on the seventh fret of G. Then, simply shift this finger shape down one string so that your index finger is on the fifth fret of the E string with your other fingers on the seventh frets of the A and D strings. Play the chords in the sequence that they're highlighted with parentheses below:
Get ready to rock with the First Act Electric Guitar with Amp. It's scaled down for smaller players, yet it's designed with the same materials, electronics and appointments as First Act's full-size guitars for full rock sound. Kids will feel encouraged and excited about an authentic music-making experience while playing an instrument designed especially for them.
A Power attenuator enables a player to obtain power-tube distortion independently of listening volume. A power attenuator is a dummy load placed between the guitar amplifier's power tubes and the guitar speaker, or a power-supply based circuit to reduce the plate voltage on the power tubes. Examples of power attenuators are the Marshall PowerBrake and THD HotPlate.
You might have read our review about the C40 GigMaker kit from Yamaha earlier on. This is a similar guitar, but it’s the C40II, and the black color makes it a limited edition instrument. The inlay is less “traditional” looking. Instead of an ornate “rosette” style, the inlay is a stripe pattern all the way around the sound hole, making the guitar look somewhat “jazzy,” to use a more descriptive term. So if this is the look you prefer, read on for more details.
Like the Strat above, the Fender Telecaster shares the title of being one of the most legendary electric guitars ever produced, and owes a lot of its authentic vintage sound to its unique pickups – which are both fantastic and frustrating at times. A Tele will usually feature two single-coils: a smaller one at the neck and a larger, slanted pickup at the bridge. They both deliver a twangy sound, with the bridge offering great treble tone and the neck a little more balanced. The neck pickup’s main complaint is that it is often muffled in output – unless you find a good set such as the Fender Vintage Noiseless Tele Pickup Set, which keeps things crisp and clear.
Being by nature rather sceptical, I have to admit to initially dismissing many of the recording methods in this article as 'studio snake oil', and because there was usually too little time during my own sessions to experiment with new ideas, I'd usually end up with an SM57 glued to the speaker grille by default. Taking the time out to trial the above techniques in the studio showed me quite how much I had been missing — not only much better raw recordings, but also tremendous extra flexibility at mixdown. But don't take it from me — listen to the audio examples for yourself and make up your own mind. If they don't expand your recording horizons, I'll eat my SM57...
The pickup itself consists of a long magnet, or a number of cylindrical magnets in a row, around which is a wire coil. The vibrations of the electric guitar’s strings cause changes in the magnetic field of these magnets, which in turn is able to induce a current in the coiled wire. This current is then passed on to the amplifier, which produces the sound. The stronger the magnets used in the pickups, the more sensitive they are to the string’s vibrations.
Pristine and hi-fidelity are two words that many use to describe the Fractal Audio FX8's sound. Even experts are amazed, like how Guitar Interactive Magazine praised the unit by saying: "it’s easy to say that the FX8 is the most fully featured and best sounding multi effects unit on the market right now". The quality of its reverb and delay got a lot of thumbs up, while other users found its drive and modulation effects to be inspiring.
went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back. when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier. i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.
I wanted the action lowered on two acoustics and a strap button put on. I called 6 different places around town, each one quoting me prices ranging from $50-$60 for the setup (action adjustment) and another $10 for the strap button. I called Franklin Guitar and Repair and was quoted at $25-$30 for the setup and $5 for the strap button. What a steal! So I took both guitars. He looked at one and said all it needed was minor adjustments, which he did right then and there for free. The other, he kept overnight to adjust and add the button. I picked it up today. $15 TOTAL.
{ "thumbImageID": "S.U.B.-StingRay-Maple-Fingerboard-Electric-Bass-Satin-Vintage-Sunburst-Black-Pickguard/L01028000003002", "defaultDisplayName": "Sterling by Music Man S.U.B. StingRay Maple Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Black Pickguard", "sku": "sku:site51500000209679", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "429.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-StingRay-Maple-Fingerboard-Electric-Bass-Black-Black-Pickguard-1500000209679.gc", "skuImageId": "S.U.B.-StingRay-Maple-Fingerboard-Electric-Bass-Black-Black-Pickguard/L01028000002002", "brandName": "Sterling by Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-StingRay-Maple-Fingerboard-Electric-Bass-Black-Black-Pickguard/L01028000002002-00-60x60.jpg", "imgAlt": "" } , { "name": "Satin Vintage Sunburst Black Pickguard", "sku": "sku:site51500000209681", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "429.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-StingRay-Maple-Fingerboard-Electric-Bass-Satin-Vintage-Sunburst-Black-Pickguard-1500000209681.gc", "skuImageId": "S.U.B.-StingRay-Maple-Fingerboard-Electric-Bass-Satin-Vintage-Sunburst-Black-Pickguard/L01028000003002", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-StingRay-Maple-Fingerboard-Electric-Bass-Satin-Vintage-Sunburst-Black-Pickguard/L01028000003002-00-60x60.jpg", "imgAlt": "" } , { "name": "Mint Green White Pickguard", "sku": "sku:site51500000207686", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "429.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-StingRay-Maple-Fingerboard-Electric-Bass-Mint-Green-White-Pickguard-1500000207686.gc", "skuImageId": "S.U.B.-StingRay-Maple-Fingerboard-Electric-Bass-Mint-Green-White-Pickguard/L01028000001001", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-StingRay-Maple-Fingerboard-Electric-Bass-Mint-Green-White-Pickguard/L01028000001001-00-60x60.jpg", "imgAlt": "" } ] }

Here’s the thing about acoustic guitars: those that use solid wood command a higher price than those that use laminates for their soundboard. Acoustic guitars that have a solid top are more sturdy and sound better as the wood matures. This is why solid wood models are usually more expensive, and also why they come highly recommended if you want to make a really good investment.

The written history of the classical guitar can be traced back to the early 16th century with the development of the vihuela in Spain. While the lute was then becoming popular in other parts of Europe, the Spaniards did not take to it well because of its association with the Moors.[citation needed] Instead, the lute-like vihuela appeared with two more strings that gave it more range and complexity. In its most developed form, the vihuela was a guitar-like instrument with six double strings made of gut, tuned like a modern classical guitar with the exception of the third string, which was tuned half a step lower. It has a high sound and is rather large to hold. Few have survived and most of what is known today comes from diagrams and paintings.

Similar to five-string bass guitar tuning, seven-string tuning allows for the extra string a fourth lower than the original sixth string. This allows for the note range of B standard tuning without transposing E standard guitar chords down two and a half steps down. Baritone 7-string guitars are available which features a longer scale-length allowing it to be tuned to a lower range.
Description: Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: Humbucker - Pickup Configuration: H-S-H - String Instrument Finish: White, Black, Red, Sunburst
Compared to, say, an Epiphone Dot, the Coupe offers a ‘woodier,’ more acoustic timbre. “Sparkly,” “bell-like” and “jangly” are descriptors often associated with the guitar and its stock pair of P-90s, and cranking the gain up elicits more a sizzle than roar. Be careful with the distortion, though—without a center block like those you’ll find on semi-hollows, the Coupe is still fairly susceptible to feedback.
If you use amplifier overdrive, want to use delay and reverb but still crave simplicity—I’d suggest designing a “hybrid” pedalboard. Just run your gain and filter effects in front of the amp, and use a pedal like the TC Electronic Nova System in your amp effects loop for time-based effects. This will require more cabling between your pedalboard and amp, but will sound much better than running your delay and reverb effects into a distorted amp. Pedals like the Nova System or the Eventide units boast specs rivaling studio quality rack gear.
Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.

Just wanted to get back with a thank you note. I received the kit last week and installed it in my Stratocaster with Texas Special p'ups. It's absolutely brilliant. Not only is the Blend control a superb new addition to the tonal options, but the pots also feel so sturdy and smooth. Feels like I have some custom build now. Just amazing, thank you! In addition, the treble bleed mod is the icing on the cake. I’m no longer afraid to roll down the volume knob." - Andrei Custom Blender Mod for Strat®  

It's interesting how one of the biggest brands in guitar amplification was built by a drummer! The story goes that professional drummer Jim Marshall was inspired by Pete Townshend, Ritchie Blackmore, and Big Jim Sullivan to develop a louder and better sounding amp. And he went about it by looking at a popular American amp design (i.e. Fender Bassman) and finding ways of how to improve it. After many prototypes, Jim and his team eventually came up with an amp that had their own "Marshall sound", this amp inherited the JTM label, an abbreviation of Jim's and his son Terry's names. The rest as they say is history, with Marshall being one of the most familiar amplifier brands, even to none musicians. Their brand is still the amp of choice for a long list of virtuoso guitarists, including Jimi Hendrix, Jeff Beck, Eric Clapton, Jimmy Page, Slash just to name a few. While their vintage and professional level amplifiers are still very much in demand, the company is not doing as great in the entry level to mid-tier market - which really is the bulk of where sales and reviews of come from. Still, their fans gave them enough good feedback to make it to this list, thanks to the improvements they are making to their entry level line of amps.
Another way of creating a huge sound is to split the signal from the guitar – most easily achieved via a stompbox with stereo outputs – and send it to two or more amps. All sorts of combinations of sound can be achieved, especially when panning techniques are employed. Of course, each amp can also be multi-mic’d if desired, and some truly three-dimensional results can be obtained. Different effects can be applied to the various amps, while using combinations of clean and dirty amp sounds can be really effective for delivering overdrive with definition, or grit and
Sorry Joe but I don’t really any value of this arrangement. It could work only in super bright guitars that would always need some treble bleed. It’s much better to change pot values for guitars like that, go from 500K to 250K etc. When changing pots doesn’t cut it it’s better to get rid of the pickups/guitar than to have a bleed circuit on all the time, some of the magic is always lost.
Ampeg was swallowed up by Japanese electrical giant Magnavox in 1971, when they wanted to get in on the electric guitar copy craze of the 1970s. Magnavox produced electric and bass guitars under the Stud badge as well as the successful Ampeg brand. It's been suggested that Magnavox was also responsible for producing Selmer acoustic guitar badges during this time, but that has not been verified. Selmer was sold to Magnavox around the same time they bought Ampeg, so it certainly seems plausible they could have made Selmer acoustic badged guitars as an offering for that market. Stud badged guitars were made until '75, with Ampeg guitar production continuing until 1980. Opus was another badge made by the company. Magnavox lost their interest in Ampeg shortly thereafter and the brand languished until it was resurrected over a decade later by another American company.
The cool thing about this setup is the EQ bypass feature. In other words, you can completely nullify any effects of the EQ and tap into the raw tone of the guitar. That works great for those who want that authentic tone or to let the mix engineer handle the rest. Overall, this Takamine is rock solid in all aspects. It is a great alternative for anyone who's looking to extract the most out of their money who wants to try something other than a Martin.
Before Gruhn Guitars puts out any of our fine instruments for sale, they go through our repair shop to get them ready to play. Some older instruments require extensive repairs and restoration, while others just need new strings and basic setup. But every guitar, mandolin and banjo has to meet the high standards of the repair crew before it's released for sale. Our repair staff has over 75 years combined experience repairing, restoring, building and designing guitars.
• What they’re made of: Frets are typically made of nickel-silver or nickel-steel alloys, or – less often – brass, copper alloy or stainless steel. The harder and more dense the material, with stainless at the top of the scale and soft nickel at the bottom, the brighter and more cutting the notes played on a guitar should sound. Most manufacturers use nickel alloys because the metal is soft and easy to work with. At this point, most guitarists’ ears have been developed to the sound of nickel as well, and most guitar buyers have a tendency to balk at the unfamiliar when shopping for instruments.
Just wanted to get back with a thank you note. I received the kit last week and installed it in my Stratocaster with Texas Special p'ups. It's absolutely brilliant. Not only is the Blend control a superb new addition to the tonal options, but the pots also feel so sturdy and smooth. Feels like I have some custom build now. Just amazing, thank you! In addition, the treble bleed mod is the icing on the cake. I’m no longer afraid to roll down the volume knob." - Andrei Custom Blender Mod for Strat®  
The Gallien-Krueger 800RB was a solid state bass amplifier head introduced in 1983 that was liked by bassists for its loud, clean sound and durable construction. It introduced the concept of bi-amplification, as it sent 300 watts of low register sound to the bass speakers and 100 watts to the tweeter.[6] The GK used a tube preamp simulator circuit called "boost". GK 800RB users include Red Hot Chili Peppers bassist Flea and Guns and Roses' Duff McKagan.[6]
The movie is very hauntingly beautiful, and it's especially highlighted by an awesomely haunting score, and some breathtaking visuals. The story is interesting, but it's definitely slow-paced, and the climax is much more of an intellectual payoff than a spectacular action scene (which many viewers might be hoping for). So I can definitely see why some people would hate this film, but I loved it. It's one I definitely won't forget anytime soon too, and it's great to see Natalie Portman (my old favorite actress) back in top form! watch movies online pro
The next step is to figure out what gauge, or thickness of string is best suited to your playing ability and style. Thinner gauges are easier to fret and bend, and may be better suited for beginners, until callouses build up on the fingertips. Heavier strings tend to produce greater volume and fuller tone. Nylon strings are typically categorized as light, medium or heavy tension. Steel strings for both electric and acoustic guitars are categorized by the gauge, or thickness of the lightest string, the high E string, measured in thousandths of an inch, with .09 being a common size for an electric set. A set of electric strings may be labeled .09-.042 - this is the gauge of the lightest and heaviest string in the set. Acoustic sets are a little thicker, so a typical medium-gauge set might be .012-.054.
Very cheap acoustics are usually not such a great idea. Often their sound quality is poor and they are hard to play. I often see students selling them after a six-month struggle (if they managed to stick with it that long!). So if your budget is very tight, I would not get an acoustic. You may think you save a little money because you don't need to buy an amplifier as well, but as I said before you don't have to use an amplifier to practice anyway.
Low frets aren't a bad idea, and Carvin is a very good brand for guitar, amp, etc. To me, it seems that the neck shape is going to be very important for you. Double-check what Carvin's return policy is, and if you think it will work for you (whatever it is) then I would totally say go for it! The caveat is that I would bring it to your local music store for them to do the setup, setups and intonations usually need to be done after shipping, and you'd need to have it done if you were changing string gauges anyways, so.... 

For practice, tone, playback and recording the Cube series is hard to beat. Integrates with iDevices for playing along with music and gives you all the effects and amp sounds you need in one place. The Roland CUBE-10GX Guitar Amplifier Combo is super lightweight and compact making it a great practice amp for home or studio use. If you're in need of a bass amp, the Roland Cube 20XL Bass Guitar Amplifier is a great solution too.
Pete Townshend turned his guitar into a machine gun. That was the actual sound he went after, slamming his guitars into speaker cabinets and toggling the pickup-selector switch violently. “To me the guitar was a symbol,” explained the Who’s lead guitarist. “It was a metaphor for a machine gun. And the only thing you could do with a machine gun in the 60s was break it across your legs. That’s what I did.” You can hear these specific sonic strategies on songs like My Generation and Anyway, Anyhow, Anywhere.

The simplest guitar amplifiers, such as some vintage amps and modern practice amps, have only a single volume control. Most have two volume controls: a first volume control called "preamplifier" or "gain" and a master volume control. The preamp or gain control works differently on different guitar amp designs. On an amp designed for acoustic guitar, turning up the preamp knob pre-amplifies the signal—but even at its maximum setting, the preamp control is unlikely to produce much overdrive. However, with amps designed for electric guitarists playing blues, hard rock and heavy metal music, turning up the preamp or gain knob usually produces overdrive distortion. Some electric guitar amps have three controls in the volume section: pre-amplifier, distortion and master control. Turning up the preamp and distortion knobs in varying combinations can create a range of overdrive tones, from a gentle, warm growling overdrive suitable for a traditional blues show or a rockabilly band to the extreme distortion used in hardcore punk and death metal. On some electric guitar amps, the "gain" knob is equivalent to the distortion control on a distortion pedal, and similarly may have a side-effect of changing the proportion of bass and treble sent to the next stage.
The Strat didn’t just sound different, its aesthetics and ergonomics were totally unique and innovative for its time. Instead of a standard slab body, the Stratocaster had double cutaways and was contoured in a way that had never been seen on a solid-body guitar. Originally built for legendary western-swing musician Bill Carson, it was quickly adopted by rock ’n’ roll pioneers like Buddy Holly and Hank Marvin, and has been the tone behind countless Top 40 hits.

The C7’s back, fretboard and bridge are all rosewood, which makes for a stunning color contrast with the spruce. The strings are Savarez Cristal Corum, in high tension (500CJ), but according to one professional guitarist, the action is very easy no matter the tension, so a beginner should have no problems starting out on this model. Even someone who’s played a good while but simply wants something they can “jam” on whilst out on a recreational road trip, or play on a small-gig basis, will love the Cordoba C7 spruce-top.

As the ’60s dawned, electric guitars began to increase in popularity again, and many distributors turned to Europe for suppliers. The Italian makers were the most successful, with EKO, imported by LoDuca Brothers, in Milwaukee, leading the pack. German makers were paced by Framus, which was imported by Philadelphia Music Company, located in suburban Limerick, Pennsylvania. The Scandinavian contingent was represented by Levin, Landola and Hagstrom, the latter picked up by Merson.

The problem of the recent Gibson bashing is well-founded. There were quality issues over the last maybe 15 years. The thing is that a Gibson is still a dream for a lot of people. They get better and giving themselves a present after putting money away. Then, after several years, maybe decades of anticipation they get crappy quality for several thousand dollars. The brand is alive, they can bounce back, but the managment...instead of the elevator, they should take the japanese business shortcut. As soon as the quality and passion is back, people will love to buy one. Hope they'll get back on track before 2020. - MountainGoat

He or she might even graduate to an acoustic guitar with steel strings long before ever obtaining an amplifier for the acoustics in question, let alone an electric guitar to plug into it. And who are the heroes of the guitar? For the last 50 years it's been Jimi Hendrix, Eric Clapton, Jimmy Page, and Tom Morello, to name just a few innovative names. All of these players made their reputations on electric guitars pumping through amplifiers, and at least one of them–or one like them–is likely the reason you picked up a guitar in the first place.

Tremolo can be a subtle effect, as heard in “Born on the Bayou”by Creedence Clearwater Revival and Gimme Shelter by The Rolling Stones, or more distinct as heard in “Crimson and Clover” by Tommy James and the Shondells and “Bones”by Radiohead. Tremolo has been around since the earliest days of the rock era, and was popular with rockabilly and surf guitarists.
The sounds of the electric guitar made it to outer space. In 1977, both Voyager 1 and Voyager 2 were launched into space with remnants of international life and culture onboard. On each vessel was a gold-plated phonograph record with 115 sounds and images curated by a team led by astronomer Carl Sagan. Along with selections that included the likes of Bach and Beethoven, Sagan decided to throw in – however controversial it was at the time – Johnny B Goode by Chuck Berry, an American rock’n’roll anthem defined by its rollicking electric guitar lick.
The fretboard wood is used for the part where the frets are installed (front of the neck, where you press on the strings). All our fretboards are built from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
Not to mention the difference tones created when two pure tones (sine waves) are produced at the same time (which, important to mention - pure tones only exist in theory, every sound we hear is comprised of overtones...) - then the additional difference tones created by the interaction BETWEEN difference tones - it's basically a fractal relationship. Anybody who has spent a significant amount of time studying the physics of sound knows that the interactions that occur between sounds are so complex and immense that it's almost silly to assume that just because "wood isn't magnetic" that the natural resonance of the wood wouldn't in turn accentuate certain overtones over the fundamental tone coming off the string. You can't say that the note "has already left the string," when the note takes place over time - even a staccato note has an attack, sustain, decay, and release envelope much in the way that a synthesizer does (this is where the idea for artificial dynamics envelopes came from anyway).
Jazz guitarists use their knowledge of harmony and jazz theory to create jazz chord "voicings," which emphasize the 3rd and 7th notes of the chord. Some more sophisticated chord voicings also include the 9th, 11th, and 13th notes of the chord. In some modern jazz styles, dominant 7th chords in a tune may contain altered 9ths (either flattened by a semitone, which is called a "flat 9th", or sharpened by a semitone, which is called a "sharp 9th"); 11ths (sharpened by a semitone, which is called a "sharp 11th"); 13ths (typically flattened by a semitone, which is called a "flat 13th").
In 1941, CMI became the national distributor for National Dobro products. In ’42, Victor Smith, Al Frost and Louis Dopyera purchased controlling interest in the company. By this time, however, the world was at war and almost all instrument manufacturing ground to a halt as all segments of industry converted to production of materials to support the war effort. In October of 1943, with builders in wartime hiatus, the new owners changed the company name to Valco Manufacturing, incorporating the first initial of each partner’s given name (V-A-L-Co).
There are only two Amazon reviews for this instrument, as it is at a higher price point than other guitars, but the reviews are very positive. The rich tone of the cedar as well as the ability to take this classical guitar into the world of electrical pickups makes this a fabulous option for the musician looking to upgrade to a more professional-sounding instrument.
Some of the best pedals in this segment, like the TC Electronic Sentry, will allow you to set both the volume threshold where the noise gate kicks in, and the type of interference you want to filter out. The important thing to remember about noise gate pedals is that they only eliminate hissing when you don’t play. As soon as you do, the pedal disengages and the noise comes back. With that said, noise gate pedals are essential for a good tone.
We are your Vintage Pickup specialists.   We have cornered the market of manufacturing the most accurate vintage pickup reproductions to which can not be equaled.  Our process is to chemically analyze an original pickup magnets and wire, then we reproduce them with the exact same magnets and wire.  We don't use stock magnets or wire.   We don't degauss magnets and say they are vintage.  Our magnets are only as strong as the elemental composition will hold.  Our wire is specially manufactured for us, we have many batches of wire with all different types of resistances and O.D.'s.  Our wire also is processed differently than modern conventional wire, these little details are what makes the Klein Pickups Reproductions the most accurate in the world.   We have a full array of models that we reproduce.  Check out our site for the full list of all of our offerings.   As a small business we always appreciate your business & support.  -Thanks

The most important thing to a 5string is the tone ring with a resonator, I've been plays 36yrs. I have an Alvarez Denver belle flat top tone ring, a White Eagle archtop tone ring and my favorite is a Hohner artist flat top tone ring. Regarding a guitar my choice is a Martin D-35 ease of play & tone that is awesome! a 5 string take Many hours & months of practice on your rolls, forward, backward alternating thumb pattern, keeping your timing in check so you do not hit the string with your middle finger out of synch. Good luck have fun, no time better to learn than now!

that is not quite the reality since most are made in mexico or japan as they are of lower quality. You only meet those type of criterion when you buy a high handmade guitar which will be at least 1200 us or 1600 canadian. As you meet the entry level of solid wood prices better overall quality. It doesn't matter who makes the guitar : martin taylor, gibson, maton, collings, santa cruz, or even a high end a high high luthier like Olson, traugott or Ryan. The sound of the instrument and the perception that we have while we stroke a chord will define if we like the sound. We see how it feels, we look at a price that we feel comfortable with. Otherwise anyone would land a lowden, huss and dalton, bourgeois and the marquis version of Martin hd-28vs for instance. The personality of your style will infuence a lot of more then who makes it, because you buy the final product not the people who makes it.
The Dobro All-Electric featured a pickup purchased from the fellow who’d invented it in ’32, Arthur J. Stimson of Seattle, Washington (it was not invented by Dobro’s Vic Smith, as has been reported elsewhere). This was, as far as we know, the first modern electric guitar pickup, with the magnet under the pickup, rather than over the strings, as on Electro/Rickenbacker instruments (or the presumed “transducer” on the ’28 Stromberg-Voisinet). Stimson’s pickup had a large horseshoe pickup in the body with two coils, one for bass and one for treble strings, each with its own bar polepiece. A 1/4″ jack outlet sat on the top down near the standard stamped National trapeze tailpiece, next to a single volume control.
Get ready to rock with the First Act Electric Guitar with Amp. It's scaled down for smaller players, yet it's designed with the same materials, electronics and appointments as First Act's full-size guitars for full rock sound. One high-output humbucking pickup delivers big rock distortion and classic clean tones. The maple neck and rosewood fingerboard offer a solid feel and warm tone. Classic hard tail bridge pumps up the sustain. Independent volume control means the ultimate in sound tweaks.

The Ovation Guitar Company founded by Charles Kaman based in the USA. The company primarily manufactures nylon-string acoustic guitars & steel-string acoustic guitars.These are the kind of electric guitars that are ideal for a recording in a studio and also great for stage performance. Their design incorporates, a wood top with a rounded, synthetic bowl shape instead of the traditional back and sides. CE44-RR is one of the most popular series of acoustic guitars produced by this brand. This is an expensive brand of guitars whose starting price is 31,555 INR approximately.

Vacuum tubes were the dominant active electronic components in bass amplifiers manufactured from the 1950s until the early 1970s, and tubes continue to be used in the 2010s for expensive bass combo amplifiers, amp heads, and preamplifiers (as well, tube amps continue to be used by audiophiles for some expensive home hifi stereo systems). Tube amplifiers for bass almost always use class AB1 topology for efficiency reasons.
Legend has it that funkadelic's "Maggot Brain," the 10-minute solo that turned the late Eddie Hazel into an instant guitar icon, was born when George Clinton told him to imagine hearing his mother just died – and then learning that she was, in fact, alive. Hazel, who died of liver failure in 1992 at age 42, brought a thrilling mix of lysergic vision and groove power to all of his work, inspiring followers like J Mascis, Mike McCready and Lenny Kravitz. "That solo – Lord have mercy!" says Kravitz of "Maggot Brain." "He was absolutely stunning."

@Dax – Sorry to hear that you are having trouble with the pedals in your setup. If the pedals work on their own in front of the amplifier isolated one at a time, this is likely related to a setting or connection with the pedals. Please shoot us an email to support@strymon.net with full details on the amp make and model, the inputs and outputs used on both the amp and each of the pedals, and the setting of the switch on the back of the pedals. Also, include whether this happens on every preset or only certain presets with each pedal.

Making their second appearance on our list, Mesa Boogie delivers with the Dual Rectifier Rackmount (appropriately nicknamed the “Racktifier”). This 3-U behemoth is simply a Dual Rectifier Head, and is one of the very few rackmounts to contain a pre-amp and power-amp all-in-one.  The Racktifier is made for those who simply want the dual rectifier sound, but have the “rack-gear bug”.
In the most commercially available and consumed pop and rock genres, electric guitars tend to dominate their acoustic cousins in both the recording studio and live venues, especially in the "harder" genres such as heavy metal and hard rock. However the acoustic guitar remains a popular choice in country, western and especially bluegrass music, and it is widely used in folk music. Even metal and hard rock guitarists play acoustic guitars for some ballads and for MTV unplugged acoustic performances.
The Kent 800-series hollow bodied guitars all had asymmetrical bodies and the pickup closest to the neck was tilted. There are several Kents that had symmetrical hollow bodies and no tilted pickups. The pickups are either humbuckers or wide single coils with covers. They resemble Gibson ES-style guitars. The necks and headstocks are very similar to the Kent 800s. They're probably newer than the 700s and 800s. I won’t be covering those here.
Williamson injected new life into the group, bringing an ideal balance of discipline and frenzy, best heard on the group’s 1973 disc Raw Power, the album that launched thousands of punk and post punk bands. “I’m his biggest fan,” the legendary Smiths guitarist Johnny Marr once said of Williamson. “He has the technical ability of Jimmy Page without being as studious and the swagger of Keith Richards without being sloppy. He’s both demonic and intellectual, almost how you would imagine Darth Vader to sound if he was in a band.”
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(574) 247-0131, visibilitySalePrice=299.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, invMsgBackOrdered=false, displaySku=113206695, stickerUrlLink=null, skuPriceVisibility=1, kitCarouselSkuIds=null, invMsgAvailability=, availableDate=Thu Oct 25 07:28:45 PDT 2018, stickerURL=null, serialized=false, listPrice=399.99, name=Sunburst, isShipsInternational=false, storeCity=Mishawaka, partNumber=null, invMsgBuyToDemand=false, inventoryStatus=1000, storeName=Guitar Center South Bend, newPrice=299.99, status=instock, priceDropPrice=100.00, condition=null, stickerText=Price Drop, stickerClass=stickerEmphasis, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, prop65=null, usedGrade=Good, salePrice=299.99, warranty=false, wasPrice=399.99, isOnSale=false, stickerDesc=Price Drop, displayId=113206695, storeId=620} 299.99 USD

Use of audio feedback to enhance sustain and change timbre. Feedback has become a striking characteristic of rock music, as electric guitar players such as Jeff Beck, Pete Townshend and Jimi Hendrix deliberately induced feedback by holding their guitars close to the amplifier. Lou Reed created his 1975 album Metal Machine Music entirely from loops of feedback played at various speeds. A good example of feedback can be heard on Jimi Hendrix's performance of "Can You See Me?" at the Monterey Pop Festival. The entire guitar solo was created using amplifier feedback.[26]

{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: sx","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"sx","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
The Effect: Pedalboards are not guitar effects, but are an essential piece of equipment for every musician utilizing more than 2 or three pedals. Essentially, a pedalboard is a casing for guitar pedals, specially crafted to house a number of effects – typically ranging from 4 to 12. In some cases, boards come as just casings and it’s up to the player to sort out the electronic department and powers supply; in other cases, all the electronics are included in the mix and even cables are included. So in a nutshell, boards make your pedal use far more convenient and practical. In our opinion, they are an absolute must-have for any player who has more than two effects in use. For a first pedalboard I would recommend the Donner DB-2 as a great option.

Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Bubinga - Neck Construction: 3 Piece - Nut Width: 48mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 7 In-Line - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG 707 - String Instrument Finish: Black
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.
Popularity also was a critical factor in our choices, although we generally passed over a few best-selling reissues or boutique clones in favor of the real deal. So even though the Bubba Bob Buttcrack Tube Overdrive may sound more soulful than an original Tube Screamer, if it’s little more than a copy with slightly upgraded components, it didn’t make the cut.
I use the boss me-8 for 15 years, now with the boss me-25 i have the same kick ass sound plus some more effects and customisations, also it comes with a beutifull surprise that i don't even expect, this guiar pedal is also an audio interfase that suport digital audio via USB, is really amazing you will not regret, it doesn't come whit a power supply only batteries, buy one separatly.
And that’s about that. After ’93 Martin Stingers, like their previous Martin-brand cousins, started drifting off into solidbody byways of guitar history. The Stinger ST-2, basic fulcrum-vibrato Strats with pickguards and three single-coils, in black, red, and white, and the now ubiquitous droopy pointy headstock, was still listed in the 1996 Martin catalog, but these were pale reflections of the peak years.
However, John Leckie states an interesting preference for an SM58 and U67 rig instead: "SM57s tend to be that little bit brighter than the SM58, which really isn't what you want when you're miking up an electric guitar amp. You really want to pick up a flat signal, an 'unstimulated' signal I suppose is the word... The U67 gives you the warmth and a broader sound."

The Limited Edition Slash Firebird Premium Outfit also features Epiphone's rock solid nickel hardware including a classic Epiphone LockTone ABR Tune-o-matic bridge and Stopbar tailpiece, Kluson Reissue Firebird Banjo-style machine heads with a 12:1 ratio, a Switchcraft 1/4" output jack, and Epiphone Straplocks. A standard Epiphone hard case is also available.
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
For this particular setup, I used a Fender Stratocaster. George used those quite frequently. They used a Tweed Champ. Now, these were being used quite a bit around that time. Eric Clapton was using them on Layla, and word is that when Clapton was playing on All Things Must Pass, he had his Champ there, and I know for a fact that George had a collection of tweed amps.
Collings Guitars is an Austin, Texas based stringed instrument manufacturer. The company was founded in 1973 by Bill Collings who is “one of the most recognized and respected names amongst aficionados of modern acoustic instruments.”[ Their acoustic guitars have been highly regarded for decades.[2]In addition to acoustic guitars they also make electric guitars, archtop guitars,mandolins, and ukuleles.
The Meisterklasse is a high-end harmonica on the modular system, made in Germany, featuring chrome-plated cover plates, an anodised aluminium comb, and extra thick 1.05mm nickel-plated reeds. One other feature that sets the Meisterklasse apart from most other Hohner harmonicas are its full-length cover plates, which extend all the way to the ends of the harmonica's comb rather than sharply angling down before the ends to form an adjoining surface parallel to the reedplates and comb. The only other Hohner harmonica possessing this quality is the curve-framed Golden Melody.[25]
Here's another guitar many people feel is a great value. This Pacifica features an agathis body, maple neck, and rosewood fretboard, with two single coil pickups, and one humbucker. The consensus is the guitar is reasonably well made, and the quality of the wood tends to be high. Those who go on to become serious guitarists might want to consider upgrading the electronics of the Pacifica HSS.
I have played all sorts of guitars, Guild, Gibson, Epi, Lowden, Fender etc etc. Walden for a beginner/intermediate are far beyond anything you can get for the same money. Exceptional sounding and great build quality, and because no-one has heard of them you can pick them up for half the price or any of the "named" brands if you get a good used one. I have had my hands on 3 in recent years, I got them for less than £100 each - one for £50 and it held its own with anything else I had that cost nearly £1k new. I would recommend them absolutely.

Created four identical test rigs out of scrap wood from my workshop. They are all 725 x 35 x 47 mm in size, and weigh 651 grams (Alder), 618 g (Koa), 537 g (Swamp Ash), and 818 g (Zebrano). They obviously don’t exactly mimic a guitar, but should for the sake of the test resemble the type of tensions and forces that a guitar body with a neck is subjected to.
Lastly, we have the M-100FM. This guitar features a body that is similar that Super Strat style Ibanez is known for, packed with a great set of pickups. This is a mid range guitar, but one that is very capable compared to its immediate competition. If you need an axe that looks good and plays good as well, ESP LTD M Series M-100FM is the ESP for you.
I have a Lyle Acoustic Guitar Model 690 purchased about 1966 or 67. It appears to be in near brand new condition as I've rarely played it and it has been stored in a felt lined case its entire life. All the keys still turn, it has steel strings. I'm ready to part with it and want to ask a fair price and not get soaked. Does anyone have any idea what this beautiful instrument is worth?

Modelling effect – Many BOSS modelling effects use COSM or Composite Object Sound Modelling, which uses computer-processing power to digitally precisely model the electronic, mechanical, and magnetic characteristics inherent to an instrument, amplifier, or speaker, and also to create completely new sounds. Modelling effects can be dynamic or time-based – it can even make your guitar or amp sound like a completely different type of guitar or amp.
That said, information regarding Asian-guitar production from the 1970s and early 1980s is cloudy at best. Most lower-end Lotus-branded guitars were produced by either Samick or other factories in Korea or Indonesia. However, some of the higher-end Lotus instruments were built by the Cort factory in Korea or by one of three factories in Japan: Yamaki, Matsumoku, and Moridaira.

Pickup selectors can wear out over time. The lugs and the rotating switch can loose their tight connect with years of use. Also, many inexpensive guitars made today use cheap electronic parts. You may just want to upgrade your switch for more control and better selections. It is fairly easy to install a new pickup selector. Here are a few simple steps to replacing your pickup selector.
Simple mistake that the beginners do is not selecting the right pickup on the right time. For example Normally they put the switch for the bridge pickup for soloing or do the powerchords. But then, to do some plucking, clean strumming or ryhthm, they still using the bridge pickup. So the sound is so dry, They should change it to toggle number 2(or for 5 way switch, toggle number 2 or 4)
He was no virtuoso, and that's the whole point: By snatching electric guitar from note-shredding technicians and giving it back to artists, freaks and poets, Kurt Cobain became one of the most important players ever. Cobain didn't invent alt-rock. But with his love of Cheap Trick, the Melvins and Kiss, he gave it the metallic power necessary to conquer the world. His playing wasn't all untutored squall, either: See the unconventional chord progression and mastery of quiet-loud-quiet dynamics on "Lithium" – and pretty much every other Nirvana song.

Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
It features a solid mahogany top with laminated sapele back and sides, leading to a warm tone that’s a joy to listen too. Despite the small body size, the BT2 has a robust projection, thanks to the arched back. The neck is joined to the body via screws, which tarnish the look a little, but leave no impact on the slick playability or the tone, so aren’t a big deal.
Rounding out our list of the best acoustic-electric guitars, the Yamaha L-Series LL6 is a functional, reliable and great-sounding guitar. The LL6 features a solid Engelmann spruce top that’s treated with Yamaha’s ARE (Acoustic Resonance Enhancement) technology. This gives the guitar the rich tone that you’ll only find on guitars that have aged for many years.

During the NSF grant cycles, the STEM Guitar Project has exceeded initial estimates of faculty impacted by recruiting over 450 STEM educators, with an additional 500 faculty exposed via national education conferences. Thus far, this effort is impacting over 20,000 students nationally over the 8 years because of faculty members adopting or adapting the curriculum developed through the project.
Ukuleles were in highest production from 1916 to the 1930's, though still manufactured in quantity until 1965. Production quantities during some periods were as great as Martin guitars. Martin ukes are considered to be the best for craftsmenship and sound. The Koa wood models are more collectible than mahagony models. The fancier style 5 models are worth more than plainer styles 0 to 3. All sizes are collectible.
It’s apparent right away that Acousticsamples knows how to sample a guitar, regardless if it’s acoustic or electric. All frets on all the string have, of course, been meticulously sampled and taken through a round of guitar techniques: slides, mutes, hammer-ons, pull-offs, staccatos, fret noises, and a plethora of other articulations — 53 different samples per fret/string.

One look around our shop and you'll see that we're serious about offering our customers a large selection of instruments, equipment and gear. You'll find both new and used instruments, and our top-notch staff are here to help you choose exactly what fits your needs, preferences and budget. If you're interested in learning new skills and techniques, check out the group workshops we host on a regular basis. We cover a wide range of music topics, so stop by and see what class we're holding next. Can't make it in? Give us a call at 505-889-6300, and we'll be happy to answer all your questions.

When two sine waves with frequencies A and B are ring-modulated, the output will also contain the frequencies A+B and B-A. If frequency B is not a multiple of A, these additional frequencies are inharmonic; e.g. ring-modulating sine waves at 1000Hz and 1250Hz will add the frequency 2250Hz, which is neither a multiple of 1000Hz, nor of 1250Hz. When more complex sounds are ring-modulated, sums and differences of all the harmonic frequencies are added.

Looper pedal: A looper pedal or "phrase looper" allows a performer to record and later replay a phrase, riff or passage from a song. Loops can be created on the spot during a performance (live looping) or they can be pre-recorded. By using a looper pedal, a singer-guitarist in a one person band can play the backing chords (or riffs) to a song, loop them with the pedal, and then sing and do a guitar solo over the chords. Some units allow a performer to layer multiple loops, enabling the performer to create the effect of a full band.[87] The first loop effects were created with reel-to-reel tape using a tape loop. High-end boutique tape loop effects are still used by some studio producers who want a vintage sound. Digital loop effects recreate this effect using an electronic memory.[88]
The Jeff Beck Oxblood is available in limited numbers. The first 50 of these historic guitars were aged at Gibson Custom to look like Beck’s original, then signed, numbered and played by Beck himself. The next 100 guitars were prepared with Gibson Custom’s V.O.S. finish, bringing the total run to 150 instruments. Each one also comes with a standard Gibson Custom case.
Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too. 
Why We Liked It - Whether you want to find an electric guitar to play sweet country tunes or something completely different, this is a great guitar! It’s extremely versatile and is therefore one of the best ones we’ve tried for beginners so far. That doesn’t mean it can suit more advanced musicians and many other skill levels as well, but especially for beginners, versatility is key.

I was lucky. Went into to a small local music store and they had it for a long time and were trying to get rid of it quick. Got it for about $800. The previous Rick 12 I had (with narrow neck) I bought for $400, fixed broken nut, then sold to West LA Music for $750 cash so I could get the Petty model. Transactions that were definitely worth it at the time.
It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.
Distortion is an important part of an electric guitar's sound in many genres, particularly for rock, hard rock, and metal. A distortion pedal takes a normal electric guitar signal and combine harmonic multiplication and clipping through the use of analog circuitry to create any number of sounds ranging from a fuzz sound to the sound of an overdriven tube amp and beyond! Distortion is essential to Heavy Metal Music.
During World War II, instrument manufacturing at Gibson slowed due to shortages of wood and metal, and Gibson began manufacturing wood and metal parts for the military. Between 1942-1945, Gibson employed women to manufacture guitars. "Women produced nearly 25,000 guitars during World War II yet Gibson denied ever building instruments over this period," according to a 2013 history of the company. Gibson folklore has also claimed its guitars were made by "seasoned craftsmen" who were "too old for war."[13][14]
Firstly, we advise sticking with a brand name you can trust. We’ve established that there’s nothing particularly premium about the guitars on offer at $200, but by sticking with Fender, Ibanez, Yamaha, Epiphone, Oscar Schmidt and the others on this list, you at least guarantee a guitar from a renown guitar manufacturer with some history, instead of something thrown together by a company who don’t specialise in instruments.
Electri6ity has been around for a while now, but I think it's still the cat's meow of sampled guitar libraries because of how deeply sampled and deeply controllable it is. Its wealth of articulations will allow you to create stunningly realistic guitar tracks, but the trade-off is that there are a lot of keyswitches and keyswitch combos to learn at both ends of the keyboard, and it's a big library that costs $400. For that reason, it may be a little overwhelming to be a "go to" library, but if you have the ambition to learn and use it, your guitar tracks will have no competition.
If you’re making the crossover from electric to acoustic, then Takamine won’t be a particularly well known brand to you, but rest assured that they’re a top make when it comes to acoustics, and of course electric acoustics. The GN93CE-NAT is a mid-range electric acoustic that features some really nice touches, such as the rosewood fretboard, and is an interesting choice.
{"product":{"id":"114572014","stock":"instock","price":"239.99","name":"S421 S Series Solid Body Electric Guitar","download":false,"sku_id":"114572014","checksum":"159269514523","rep_id":"site5114572014","displayId":"114572014","sku_display_id":"114572014","sku_rep_id":"site5114572014","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
{ "thumbImageID": "Les-Paul-Standard-HP-2018-Electric-Guitar-Blood-Orange-Fade/K35709000001000", "defaultDisplayName": "Gibson Les Paul Standard HP 2018 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blood Orange Fade", "sku": "sku:site51500000137377", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Blood-Orange-Fade-1500000137377.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Blood-Orange-Fade/K35709000001000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-HP-2018-Electric-Guitar-Blood-Orange-Fade/K35709000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Cobalt Fade", "sku": "sku:site51500000137376", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Cobalt-Fade-1500000137376.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Cobalt-Fade/K35709000002000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-HP-2018-Electric-Guitar-Cobalt-Fade/K35709000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Hot Pink Fade", "sku": "sku:site51500000137375", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Hot-Pink-Fade-1500000137375.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Hot-Pink-Fade/K35709000004000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-HP-2018-Electric-Guitar-Hot-Pink-Fade/K35709000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Heritage Cherry Fade", "sku": "sku:site51500000137379", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Heritage-Cherry-Fade-1500000137379.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Heritage-Cherry-Fade/K35709000003000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-HP-2018-Electric-Guitar-Heritage-Cherry-Fade/K35709000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Mojave Fade", "sku": "sku:site51500000137378", "price": "2,429.99", "regularPrice": "3,629.00", "msrpPrice": "6,049.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Standard-HP-2018-Electric-Guitar-Mojave-Fade-1500000137378.gc", "skuImageId": "Les-Paul-Standard-HP-2018-Electric-Guitar-Mojave-Fade/K35709000005000", "brandName": "Gibson", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-HP-2018-Electric-Guitar-Mojave-Fade/K35709000005000-00-60x60.jpg", "imgAlt": "" } ] }