This style of volume effect rhythmically reduces and swells the volume of the signal in a regular cyclic fashion.  Often heard in Country and Western type guitar tracks, tremolo was commonly built into older amplifiers and is one of the earliest recorded effects.  The speed and depth of the effect is controlled on the pedal by way of one or two potentiometers.  When set to the tempo of a song, the player can produce an extra layer of rhythm on top of what is being played.

In fact, these units were specifically designed to be used by the novices that want to learn the particularities of playing the guitar.Nevertheless, they are also purchased by veteran players because of their quality and maneuverability. As cost-efficient units, these guitars are a great investment, and you should consider them before placing any orders.
I've spent a few weeks on this kit - I will update with progress. Cutting out the headstock and finishing the guitar was fun and not too difficult. I chose to use TruOil and a natural finish, which takes a few weeks to finish. The body I got was made from 4 pieces of joined wood, and I wasn't careful about checking for glue spots, so there are a couple in the finish, but it still looks great. The neck fits nicely and feels good. It is straight and correctly set up for string tension (a little bit of bow before the strings are on).
I am struggling with the same issues trying to wrap my head around the benifits of constructing my neck through in this fashion . It would appear most of the big dog builders subscribe to this theory though I don't really know why. I read in a post in this forum that it started with a mistake by luthier Carl Thompson when he cut the channel too deep for the neck and was later copied by Ken Smith ,and then Fodera.
Plug an electric guitar into the input. Adjust the input drive level as high as it will go without causing the input clipping light to activate. Adjust the drive level control to a level below where the drive clipping light activates. Different reverb sounds can be achieved by lowering and raising the reverb drive level. Adjust the reverb level for a nice sounding balance between the dry and reverb sounds. Adjust the output level for the optimum volume level. Now go play some surf music.
These are the most-used "building block" effects, and in combination, there are an infinite number of sounds you can make. The best thing to do is spend some time and analyze the sounds of your favorite songs and players. Once you have figured out that sound, head to your local store and give them a try. Then come back to Reverb to find a great deal! What were some first pedals that you found yourself loving when you got them?

The Tone knobs on electric guitars are really just potentiometers. It’s important to know that they do not ADD treble or bass to your sound, they only remove higher frequencies as you turn them down and restore those frequencies to the sound as you turn them up. When they are set at 10, you are getting all the frequencies that your guitar and pickups can produce. In some cases, this may sound too shrill or harsh so if you turn the tone knob down, you are removing some of the higher frequencies or “rolling off “ the treble. Turning the knob back up towards 10 restores those frequencies, but isn’t actively “adding” treble frequencies to what your pickups are capable of producing.
Amps and effects don't have to be just for guitars and basses, either - nor do they have to play out loud. While the vast majority of amplifiers fit into the categories we've just been through, some exceptions would be amps made for keyboards and electronic drums, which can generally be used to amplify just about any instrument as long as you can attach a pickup or microphone. And if you want to practice the guitar or bass without waking up the neighbors, be sure to look into headphone amps as well: they'll push all the sound you love, but to your ears instead of a loudspeaker, so you can keep the sweetness to yourself... until you're ready to share, that is!
If you're anything like me, you started out with a basic beginner's guitar, and over time you realized that you were ready for something better. I had a Squier Telecaster(standard series) and I was ready for a change. I was set on a Les Paul of some sort, possibly a used LP Standard. I read tons of reviews, then I started reading some of the Epi Les Pauls(the nicer ones, $400-500).
You can hear one all over Led Zeppelin’s debut record and all over Jeff Beck’s trademark “Heart Full of Soul” intro riff from the Yardbirds. He also used it extensively on the Jeff Beck Group sessions. Of course the most famous fuzz pedal is the Dallas Arbiter Fuzz Face. This pedal was favored by Jimi Hendrix and set the benchmark for fuzz tones that we are still chasing to this day.
The slide part on that track was quite difficult to simulate, but again, the guy I have playing in my band, that I've been playing with for a while, can do it, and he and my son are the only two guys I know that play it right. Recently, I had Ronnie Wood playing with me, and he did a good job with it. I think if you have your head on it, it can be done.
Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.
Pickup(s) 3 or 2 single-coils, with the latter having a hot humbucker in the bridge position,[1] with the exception of the Acoustasonic Strat and Stratacoustic models, the only acoustic Stratocasters.[1]Most Stratocasters generally came with a pickguard; on certain high-end versions, the pickguard is absent. There are also select models that come with active electronics and HSH, HHH, HH or Hpickup configurations.Humbucker-equipped Strats are often referred to as “Fat Strats”, in reference to the fact that humbucking pickups usually tend to have more bass in the output signal than single coils, thus making the sound “fatter”.
Before recording, make sure that the guitar is in tune, with a fresh set of strings, and that you check the tuning regularly. New strings always produce a brighter sound and better sustain. If the instrument has been properly set up, string and fret buzz should be minimal; while this type of noise is much less obvious when playing through heavily- distorted or overdriven amplifier settings, it can be very distracting when using clean settings or recording directly.
Yea um John Mayers way misunderunstood and under rated, watch the 'where the light is live in LA' DVD(and actually watch it before you think of posting a reply) and tell me he aint an amazing guitarist, im not saying hes a god but hes definetly an amzing guitarist n i rekon he deserves a spot just for the fact that hes one of the few guitarists of this generation with some talent.
When considering the guitar from a historical perspective, the musical instrument used is as important as the musical language and style of the particular period. As an example: It is impossible to play a historically informed de Visee or Corbetta (baroque guitarist-composers) on a modern classical guitar. The reason is that the baroque guitar used courses, which are two strings close together (in unison), that are plucked together. This gives baroque guitars an unmistakable sound characteristic and tonal texture that is an integral part of an interpretation. Additionally the sound aesthetic of the baroque guitar (with its strong overtone presence) is very different from modern classical type guitars, as is shown below.
If you’re using temporal effects such as delay and reverb, these generally work best at the end of the chain. Putting a delay at the end allows the effect to give a more natural echo to everything that comes before it; the echo itself will not be altered by other effects. The same applies for reverb. Most guitarists leave reverb as the very last effect, occasionally using the amp’s in-built reverb over a pedal. Amps that have onboard reverb usually use a spring unit which produces a shimmery twang that works well for many types of music. However, if you’re looking for a roomier type of reverb that emulates a giant concert hall, a pedal based reverb is probably what you’re looking for. Either way, putting reverb at the end of the chain provides a spacious, natural tone that simulates a cavernous echo.

Squier is another brand that makes excellent starter instruments. Just as Epiphone is authorized to make budget versions of Gibson guitars, Squier is a guitar company that brings us quality, affordable versions of classic Fender guitars. A new guitarist can start out on a Stratocaster or Telecaster that looks and sounds almost (but not quite) as good as the Fender version. In fact, based on looks alone, Squier guitars are pretty close to Fender instruments.

But who are we to judge a guitar master? We're just writers just trying to make a living. What we needed was to consult working musicians, the guys touring the country like pariahs of the Muse, the guys of metal from Drowning Pool to Warbeast, the guys of blues from Hash Brown to Smokin' Joe Kubrick. I needed to ask the guitarslingers who make their guitars bleed on stage night after night.
Gut strings were the original strings for the classical stylist.  They were literally made from the guts of farm animals, mostly sheep.  The intestines and the process used to make these strings became more expensive than nylon and thus have fallen out of favor.  Even though you may hear the term “cat gut” strings, this style of string was never made from the innards of our cute, cuddly, feline friends… just the beasts we like tend to use as a food source.
{ "thumbImageID": "4003-Bass-Midnight-Blue/513600000089000", "defaultDisplayName": "Rickenbacker 4003 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Blue", "sku": "sku:site51274034491813", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Midnight-Blue-1274034491813.gc", "skuImageId": "4003-Bass-Midnight-Blue/513600000089000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jetglo", "sku": "sku:site51274034491793", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Jetglo-1274034491793.gc", "skuImageId": "4003-Bass-Jetglo/000000107918146", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mapleglo", "sku": "sku:site51274034491783", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Mapleglo-1274034491783.gc", "skuImageId": "4003-Bass-Mapleglo/000000107918138", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Fireglo", "sku": "sku:site51274034491780", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Fireglo-1274034491780.gc", "skuImageId": "4003-Bass-Fireglo/000000107918062", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Guitar amplifiers vary widely in price and quality. Many music equipment companies import small, low-powered practice amplifiers for students and beginners that sell for less than $50 USD. Other companies produce expensive custom-made amplifiers for professional musicians, which can cost hundreds or even thousands of dollars (USD). Most combo amplifiers have a carrying handle, and many combo amplifiers and cabinets have metal or plastic-reinforced corners to protect the amp during transportation.
I like most of the the 814's I've played though they seem just a bit brighter than some other guitars along that range. I prefer Collins guitars they're kind of in between the Martin sound, and the Taylor's brighter sound. After recording with several different ones. My favorites productions are Collin's OM1A , and more affordable Blueridge, and Recording king. I prefer Rosewood back and sides, Adirondack top, mahogany neck, with ebony fingerboard. Although mahogany back and sides with Sitka/ Engelmann tops sound nice too. When recording I think (might just be me) that I get better note separation from the Collins
The Venue DI is essentially an amplifier without a speaker cab. If you go straight into a mixer or PA system this unit lets you customize your acoustic's tone in every way imaginable. While it's particularly ideal for someone who doesn't have an existing preamp in their acoustic rig, it outperforms most preamps that come standard in an acoustic guitar or even in an acoustic amp.
Lastly, if what you're really asking is "Can I play my electric guitar without making any noise that would bother my neighbors/housemates?" Many amps and all direct in setups will allow you play with headphones. I plug headphones in a small tube amp. The sound is quite nice. I find this setup allows me to experiment even more than usual since I am not self conscious about anyone hearing what I am playing. I've seen little tube amps for as little as about $125 that have headphone jacks. At that price don't expect Fender, Dr Z, Vox, Marshall or Mesa Boogie quality sound, but they get the job done of basic tube drive and bypass the loudspeaker by driving the headphones.

{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"delay & reverb effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category3"}

Comes with hard case.This is the iconic Yamaha apx-6a. Made in the 1990s it has the iconic Yamaha AMF preamp/Eq system. This specimen is in overall faircondition for a guitar that is over 20 years old. It has normal scratches and other sings of wear. Shipping is free. Estimated arrival is 4-8 business days. A signature is usually required at the time of delivery.
On the back of soundboards is a pattern of struts and braces that provide stability to the soundboard, while allowing it to vibrate as uniformly as possible. The choice of wood used for these struts and braces is much less critical than it is for the soundboard. However, the bracing pattern can have a significant impact on the sound of the instrument. Guitar makers have tried many different bracing patterns in attempts to add distinctive tonal qualities to their instruments. In addition to bracing patterns, hardwood plates designed to add support to the bridge and soundhole areas are also commonly attached to the underside of soundboards. Though the acoustic impact of these plates are minor compared to the bracing patterns, their size, shape and wood type can also affect the tone of the guitar.
Boost pedals increase the strength of your signal going in to your amplifier. This means you don’t have to use distortion to get that volume jump when you want to make the chorus or lead line jump out. A boost pedal increases the signal without adding distortion, and can be used to fatten up your sound, ‘pushing’ your amplifier harder and louder, just without the grit that a distortion pedal will add.
I just purchased a Lyle acoustic guitar in excellent condition. It's Serial # 204 and Model # 712. The top of the guitar says Lyle with a gold cross-like design up by the tuning keys. It looks like it was painted on the wood by the manufacture. The top tuning key head and neck are the color of milk chocolate with pearl-type fret inlays. The body of the guitar is a light tangerine color showing the natural wood grain under the clear lacquer finish. It has a dark chocolate bridge, and a black pick guard with a white pearl engraved inlay of a floral sprig or vine-type design. There is a set of three circles around the center opening (1 thin black line, a wide band of black and white lines and another thin black line. It has light tangerine and milk to dark chocolate stripped sides and back which is the natural wood grain showing through the clear lacquer finish. JAPAN is engraved on the back of the tuning key head in back.
The simplest close-miking technique using a single mic is one that’s familiar to anyone who has gigged in a venue large enough to have a full sound-support system. Stick a Shure SM57 or similar dynamic mic within an inch of the grille, and away you go. This technique frequently delivers a direct, punchy, in-your-face guitar tone that feels muscular in rock-oriented tracks. If you have a Royer R-121 ribbon mic or some other good ribbon or condenser option that can handle the sound-pressure levels involved in close-miking a guitar cab, these will offer variations on the traditional mids-forward SM57 flavor. In many circumstances this simple technique proves entirely adequate, or at least makes a good foundation to build upon, but you still need to consider exactly where to position that mic, and subtle variations of approach will reveal nuanced differences in the tones you can achieve. Also, if you’re playing a combo or extension cab with more than one speaker, listen carefully to determine which is the best-sounding speaker – or the one that’s right for the track – and mic that one (if you’re not sure, and have two appropriate mics, record two speakers to separate tracks to select from later, more of which below).
The pickup itself consists of a long magnet, or a number of cylindrical magnets in a row, around which is a wire coil. The vibrations of the electric guitar’s strings cause changes in the magnetic field of these magnets, which in turn is able to induce a current in the coiled wire. This current is then passed on to the amplifier, which produces the sound. The stronger the magnets used in the pickups, the more sensitive they are to the string’s vibrations.
Firstly these are both 'mic-level' or 'instrument-level' inputs (they carry very quiet signals) but hi-Z signals are more prone to interference. The lo-Z signal consists of the instrument's mono signal (hot) and it's inverted waveform (cold), the cables are twisted around one another such that any interfering signal generated in one is negated by the other (much the same as the way a humbucking pickup works).
Bonnie Raitt: features an alder body, a narrow C-shape maple neck with a late 1960s large headstock, rosewood fretboard, 9.5″ radius and 22 medium jumbo frets. Other refinements included a 3-ply white shell pickguard, three Texas Special single-coils with 5-way switching and American Vintage hardware. Available in 3-color sunburst and desert sunset. Discontinued in 2000.

In the world of amplifiers, there are amp stacks and combo amps. For beginners, a combo amp is usually the way to go, since they combine the amp circuitry and the speaker together into one unit. Check out models like the Marshall MG Series MG30CFX 30W 1x10 Guitar Combo Amp and the Fender RUMBLE 25 1x8 25 W Bass Combo Amp for a few examples of this type. For the biggest professional setups, on the other hand, a combo amp may not be quite beefy enough. That's where stacks come in, based on a head (such as the Peavey 6505+ 120W Guitar Amp Head) paired up with a speaker cabinet. You can even find some pre-made amp stacks here, like the Line 6 Spider IV HD150 150W and 4x12 Guitar Half Stack, to save you the legwork of shopping for both parts separately.
I started playing harmonica when I was a little boy. I used to get pushed out to entertain adults at two o'clock in the morning. I also had a kind of obsession about the guitar. The first actual toy that I had that I loved was a little wooden guitar that my folks brought me from a shop that sold brooms and buckets and stuff like that. I used to carry that guitar around like my friends would carry a football. I took this thing with me everywhere.
I am new to guitar but had played Baritone in grades school thru high school in a small school with a band teacher who went on to Iowa State. So I wasn’t finding where notes were and started watching guitar/music theory and found several who headed me to learn my Pentatonic E minor scale before I have finished with chords. I wanted to know where notes are on fretboard.
I think it's fair to say that we all have a pretty good idea of what reverb is, though there are several ways of emulating it in the studio. Early reverb chambers, plates and springs have now given way to digital solutions, which fall into two main camps: synthetic and convolution. Synthetic reverbs take an algorithmic approach, setting up multiple delays, filters and feedback paths to create a dense reverberation effect similar to what you might hear in a large room. Though these often sound a bit 'larger than life', they've been used on so many hit records that we now tend to accept their sound as being the 'correct' one for pop music production. Most can approximate the sound of rooms, halls, plates and chambers, but in comparison with a real reverberant environment, the early reflections often seem to be too pronounced. The advantage of a synthetic reverb is that the designer can give the user plenty of controls for altering the apparent room size, brightness, decay time and so on.
Clipping is a non-linear process that produces frequencies not originally present in the audio signal. These frequencies can be harmonic overtones, meaning they are whole number multiples of one of the signal's original frequencies, or "inharmonic", resulting from general intermodulation distortion.[34][35][36] The same nonlinear device will produce both types of distortion, depending on the input signal. Intermodulation occurs whenever the input frequencies are not already harmonically related. For instance, playing a power chord through distortion results in intermodulation that produces new subharmonics.
The question is, does koa do anything for the sound, or is it just for the esthetics? The material in instruments always affects the tone, and koa makes the tone brighter while still being deep and satisfying. Sound is always hard to describe in words, because we experience sound differently, but if you’re curious about what it sounds like, just check it out on YouTube.

Nice-Keys-CompletePlus-JNv2.0  A large set with three different piano types plus all the nice instruments.  All in a package of 943mb.  Pianos have different brightness and resonance settings available and all the nice instruments from EPs, Pads, Organs, Strings, Orchestra and Synths are included.  A printable link to the list of available instruments is here  Nice-Keys-CompletePlus-Instrument List

Oh but this guitar is beautiful. The PRS SE A50E Angelus is something you would really want to play in front of an audience because of its stunningly good looks and the quality sound it produces. This guitar has a solid Sitka spruce top, figured maple back and sides, mahogany neck, bone nut and saddle as well as ebony fretboard and bridge. It has a distinct and highly playable Angelus Cutaway body shape. The PRS abalone bird inlays on the fretboard are a really nice touch. Yes, it’s a gorgeous, well-built guitar, but that’s not all.

You'd mentioned that the bridge pickup is substantially louder on Telecasters than the neck. I have an American Standard so the relationship between the two might not be identical but I was able to make the volume levels comparable by raising my neck pickup substantially so that only about a half inch of space remained between the string and the pickup. They're now about equal volume and if anything the front pickup sounds better and more defined as a result.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
Because IRs can be recorded in virtually any space, convolution reverbs generally come with a library of IRs ranging from small live rooms to famous venues, top studio rooms, forests, canyons, railway stations and just about anything else you can think of. They sound very convincing, and there's plenty of variety to be had, but once the IR is loaded, there's only a limited amount of editing you can do without spoiling the natural sound. Usually you can apply EQ and also change the envelope of the reverb decay to make it shorter, and adding pre-delay is not a problem, but after that you pretty much have to take what you get. Some companies, such as Waves, have managed to create additional controls but, as a rule, the further you move from the original IR, the less natural the end result.
I'm going to break the electric guitar setup guide into five parts, which are all in the links below. It's important to note that the five parts be done in the order in which they're presented. If you have a truss rod that's out of whack, it makes no sense to move on and adjust the bridge. I realize this may be painfully obvious, but for the one person who may not get it, I'm talking to you. Good luck
A noise gate is a very handy device that gets rid of hums and hisses that may become apparent when you're plugged in but not playing your instrument. Basically a limiter in reverse, the noise gate simply cuts out sounds below a preset level. As long as you're making music your sound is full on; but as soon as you stop playing, all the noise generated by your effects chain, vintage amp, and/or house wiring is silenced.
This is easily the most popular category of effect, and sonically is the natural first-step away from the thin sound of a straight, clean amplified guitar. If a player only owns one pedal, chances are it’s a distortion, fuzz, or booster box, and plenty of players have collections of several or even dozens of units from this genre, and use two or three at a time on their pedalboards for different colors and textures and levels of sonic sizzle. Yep, of the players who want to change their guitar’s pure sound in the first place, more probably want to filth it up than all of the other options combined.

Full hollow-body guitars have large, deep bodies made of glued-together sheets, or "plates", of wood. They can often be played at the same volume as an acoustic guitar and therefore can be used unplugged at intimate gigs. They qualify as electric guitars inasmuch as they have fitted pickups. Historically, archtop guitars with retrofitted pickups were among the very earliest electric guitars. The instrument originated during the Jazz Age, in the 1920s and 1930s, and are still considered the classic jazz guitar (nicknamed "jazzbox"). Like semi-acoustic guitars, they often have f-shaped sound holes.
As well, even though some bass guitar players in metal and punk bands intentionally use fuzz bass to distort their bass sound, in other genres of music, such as pop, big band jazz and traditional country music, bass players typically seek an undistorted bass sound. To obtain a clear, undistorted bass sound, professional bass players in these genres use high-powered amplifiers with a lot of "headroom" and they may also use audio compressors to prevent sudden volume peaks from causing distortion. In many cases, musicians playing stage pianos or synthesizers use keyboard amplifiers that are designed to reproduce the audio signal with as little distortion as possible. The exceptions with keyboards are the Hammond organ as used in blues and the Fender Rhodes as used in rock music; with these instruments and genres, keyboardists often purposely overdrive a tube amplifier to get a natural overdrive sound. Another example of instrument amplification where as little distortion as possible is sought is with acoustic instrument amplifiers, designed for musicians playing instruments such as the mandolin or fiddle in a folk or bluegrass style.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[mf] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[mf] shop: guitars: electric guitars","prop6":"[mf] shop: guitars: electric guitars","prop3":"[mf] shop: guitars: electric guitars","prop4":"[mf] shop: guitars: electric guitars","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}