Artwork: Improved Fender pickups from 1944. 1) A general view of a guitar with the pickup shown in blue and the strings colored orange. 2) An end-on view (looking down from the head toward the bridge) shows one version with a single pickup coil (green) spanning all six strings. 3) Looking from the side, you can see how the strings thread through the pickup coil. 4) In an alternative design, there are six separate pickup coils, one for each string. From US Patent 2,455,575: Pickup Design for Instruments by Clarence Leo Fender and Clayton Orr Kauffman (filed September 26, 1944, issued December 7, 1948). Artwork courtesy of US Patent and Trademark Office.
The Blues Harp has been around since the early 1970s. Until the 1990s, it was functionally identical to the Marine Band, the only differences being the cover plates and the varnish on the front of the wood comb, and the Blues Harp's profile was thinner as well. At one point, Johnny Cash promoted the Blues Harp.[20] In the 1990s, Hohner made the Blues Harp part of its Modular System (MS) line. This new Blues Harp lost its uniqueness, and is interchangeable with the other models in the MS line, but it currently remains the standby of many players who use MS harps.
I own some 13 or so, high end American, Canadian and/or Japanese 6 strings 7 basses and a full studip of gear and if my opinion means FA then I can't help but not mention my Washburn Custom Shop WV548! It has Parker guitars (famous for the FLY) patented composite glass carbon fiber fretboard, EMG active PU's (81, 85) and a real Floyd with the Buzz Feiten system and it is bar none, the fastest, smoothest, and by far the nicest playing (and sounding for that matter) guitar I own or have played in my some 30 odd years plus, playing electrics.
While it might look identical to the RevStar RS420, Yamaha Revstar RS320 is very different. The shape is the same, along with the most of the hardware. However, the tone is a whole different story. While RS420 comes with vintage humbuckers, the RS320 packs a set of extremely hot pups which are more modern. I personally liked this configuration more than the vintage one, simply because it offers extended versatility.
I’ve written in previous issues of Premier Guitar about how the size and shape of a guitar’s headstock affect its sustain and tone. Clearly, the mass of the tuning machines is a factor in this, as well. Having overseen the building of tens of thousands of custom guitars over the course of my career has given me cause to consider machine-head weight as a fine-tuning tool in and of itself. This kind of mod is more complex than the others I’ve presented here because it is harder to predict, and obviously more costly to dabble in because it involves replacing the existing tuners. Nevertheless, I put it out there for those of you who are willing to go to the limit of sanity in the search for a responsive instrument.

There are so many great things about the small guitar amps that we miss out on. While it is no shame to admit that some issues persist in the sound and ability of smaller amps, it is also worth saying that they have a whole lot of benefits that might be the reason some people decide to pick them up. I have had many amps over the years and my small amp is possibly my favorite piece of equipment (other than all the guitars on their own). I have taken it on many a trip when I had to stay somewhere that was not my home, and it has helped me keep my workout hours up to the standard that I had gotten used to. One of the very first amps I ever had was actually a small amp, nestled in my tiny little room in between my bed and my wardrobe inside which my guitar stood. My point is, whether you are just starting out or you have been playing for a while, you will find a use for your small guitar amp, especially if it is one of the best available on the market.
You can get an entirely new perspective of the fretboard by starting from the C-A-G-E and D chords. This book can help create a roadmap for the guitar, where you'll be able to know each fret's note name - one of the most important things to learn when playing. If you're unsure about learning this system, do a search for the CAGED system on YouTube and see if it's something you'd be interested in.
Although Yamaha are a better known Japanese musical instrument company, Ibanez stands out from the crowd in rock guitars, not just in Japan - but the world over - with a number of big name guitarists such as Joe Satriani, Steve Vai, and Paul Gilbert having signature models. They originally built their American presence in the 1960s on the back of Gibson and Fender copies, however the RG series introduced in the 1980s was a more original design, based on Steve Vai's JEM Universal, and became one of the biggest selling metal guitars of that period and beyond.
The solid state amp isn’t really new either, but it only came into its own following William Shockley’s world-changing invention, the transistor. Its use for the audio circuitry allows the amp to be more adaptable and easier to tune, but despite innovations in recent years, the overdrive of solid state amps isn’t yet on par with what a tube can offer, and only a few manufacturers can boast of products that come close to sounding as clean as a tube amp.
When used with the human voice, it is important that the pitch correction doesn't happen too quickly, otherwise all the natural slurs and vibrato will be stripped out leaving you with a very unnatural and robotic vocal sound. If only a few notes need fixing, consider automating the pitch-corrector's correction speed parameter so that it is normally too slow to have any significant effect, then increase the speed just for the problem sections. This prevents perfectly good audio from being processed unnecessarily.
Effects units are available in a variety of formats or form factors. Stompboxes are primarily used units in live performance and (in some cases) studio recordings. Rackmount devices saw a heavy usage during the later 20th century, due to their advanced processing power and desirable tones. However, by the 21st century, with the advant of digital Plug-Ins and more powerful Stompboxes for live usage, the need and practicality of rackmounted effects units went down, and as such, prices of rack effects have diminished due to lower usage.[5] An effects unit can consist of analog or digital circuitry or a combination of the two. During a live performance, the effect is plugged into the electrical "signal" path of the instrument. In the studio, the instrument or other sound-source's auxiliary output is patched into the effect.[6][7] Form factors are part of a studio or musician's outboard gear.[8]
The acoustic solos Reinhardt recorded with the Quintet of the Hot Club of France between 1936 and 1940 are simply astounding displays of virtuosity, melodic taste and speed that left indelible impressions on players throughout several generations, including Les Paul, Jimmy Page and Michael Angelo Batio. Django didn’t even need all four fretting fingers either, using only two left hand fingers to play complicated chords and hyperspeed solos (his third and fourth fingers were badly burned in a fire).
One day I want to own a Martin IN ADDITION to my Gibson.. but having tried both a lot.. the D-18, the D-28... I went with the J-45. The J-45 is special in that it has slim shoulders - you won't get an enormous boom out of it when un-amplified. But the sustain is super fine, and as accompaniment to the singer and as a tool for the songwriter, it is rock solid and it gives, gives, gives, then gives some more. Plus, it's sexy as hell - every boy might think he longs for a Martin, but every girl goes home with the guy with the Gibson.

While it can be a troubling task to find the perfect electric guitar to bring out your inner rock star, we hope that our electric guitar reviews & our comprehensive guide has helped you narrow down your choices. Our best piece of advice is to determine the type of genre you’re interested in playing. That will be a good basepoint for you to work from in order to determine the best electric guitar that fits your needs. Afterward, it is important to select the guitar that has the best components to give you the highest quality of sound. The color does not matter too much but the next most important factor to think about is certainly the wood type used to build the electric guitar. Picking the right type of wood is going to more or less, create better or worse sound.
{"eVar4":"shop: bass","pageName":"[gc] shop: bass","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: bass","prop1":"[gc] shop: bass","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"bass","prop5":"[gc] shop: bass","prop6":"[gc] shop: bass","prop3":"[gc] shop: bass","prop4":"[gc] shop: bass","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
More often than not a customer chooses bone as a replacement for cheap plastic nuts supplied on new guitars. It's such a good material for instruments because it's really dense – meaning vibrations travel through it faster meaning that more vibration is transferred to the rest of your instrument - essential! It's also great because it contains natural lubricants which are essential for tuning stability.
Bruce Springsteen has always had a not-so-secret weapon: "I got signed in the pack of new Dylans," he told Rolling Stone, "but I could turn around, kick-start my Telecaster and burn the house down." Springsteen didn't make any technical breakthroughs on guitar, but few players are better at coaxing emotion from steel and wood: witness the surf-rock recklessness of the "Born to Run" solo, the junkyard-dog bite of "Adam Raised a Cain" and the melancholy twang of "Tougher Than the Rest."
We guitarists can be slow to come around to new ways of doing things, heck we still prize the 1904 technology of the vacuum tube in guitar amplifiers, so it's a huge testament to Ovation's success that they've managed to be so successful while breaking the most sacred rules of guitar material and construction. Great examples of this are their Celebrity Elite CE44 and their entry-level Applause Balladeer AB24.

Created four identical test rigs out of scrap wood from my workshop. They are all 725 x 35 x 47 mm in size, and weigh 651 grams (Alder), 618 g (Koa), 537 g (Swamp Ash), and 818 g (Zebrano). They obviously don’t exactly mimic a guitar, but should for the sake of the test resemble the type of tensions and forces that a guitar body with a neck is subjected to.
A little lighter than the On-stage but equally sturdy is the Gator GFW, at only 8 lb of weight. This doesn’t mean it won’t be able to offer proper support to the heftiest amplifiers, however, since it is rated to hold as much as 176 lb before showing any signs of stress. At this capacity, most people would be able to use it as a chair without any worries.
On Martin guitars, this is a really big deal. Martins all seem to have a problem with the "neck set" on many of their guitars before 1970. High string action is the result, making the guitar very difficult to play. This can only be fixed correctly by a "neck set" (removing the neck on the guitar, and refitting the neck at a slightly increased angle, which lowers the string action). If done correctly, this does not affect the value of the guitar (and in fact can make it more valuable, as the guitar is much more playable). Generally speaking, most players would agree if the "string action" is more than 3/16 inch (5 mm) at the 12th fret, the guitar needs a neck set. This measurement is taken from the bottom of the low-E string, to the top of the 12th fret.
WARTUNG Herzlichen Glückwunsch und vielen Dank dafür, dass Sie sich für ein Produkt von Ibanez entschieden haben. Ibanez legt bei seinen Produkten die höchsten Standards an. Alle Ibanez- Instrumente werden vor der Auslieferung unserer strengen Qualitätskontrolle unterzogen. In dieser Anleitung wollen wir beschreiben, wie Sie das Äußere Ihres Instruments pflegen und Ihre Gitarre in dem Zustand halten, wie sie bei Auslieferung ab Werk war.

At its core is a combination of solid spruce and maple, which gives it a subtly brighter tone when compared to conventional spruce and mahogany body acoustics. To retain as much of the guitar's acoustic body as possible, Epiphone equipped the Dove Pro with discrete Fishman electronics, with controls that are mounted on the underside of the sound hole.
I took the Gearank scores we have calculated for individual guitars for each brand and combined them using a weighted average to produce a rating for each brand. I can best explain this by saying if a hypothetical brand had 2 models and one of them had 99 rating sources and the other one only had a single rating source then the first model's ratings would contribute 99% of the final rating for the brand. An interesting statistic; we processed more than 17,000 sources for these calculations.
I have an old 1964 60watt Australian Goldentone which I love and will keep. Had a Marshall 800 Lead at one time (head and quad box) when I was in a band but let that go when I stopped gigging. I tried a 50W ENGL combo as I was looking for an amp that was easier to cart around than my old Goldentone and I was blown away with the sound and the build quality. The ENGL should be in the top ten.
I doubt I can bring anything relevant to this discussion that hasn't been said already but since I liked the article so much and the subject has puzzled me since I got my first guitar, I jsut have to pitch in. My first guitar was a cheap Jackson-esque strat the brand was Cyclone. It was significantly lighter in weight than my friends Fender stratocaster and I liked it for that reason from the beginning. It was just much easier and more comfortable to play, esepecially while standing. Maybe because of this I've been biased to doubt the whole tonewood thing. My experience is that most 'guitar people' (at least here in Finland) seem to think that lighter wood is simply a sign of a bad quality electric guitar. I talked about this quite recently with a local luthier, who is very sience oriented and uses rosewood as the body. Guitars he makes are so light that when you pick them up at first, it is hard to believe they aren't hollow. So I asked him about his thoughts on the density and / or other qualities of the wood affecting the tone and his responce was pretty much consistent with the article. Anyhow he did mention the _theoretial_ possibility of the waves to traveling to the wood and reflecting back to the strings _possibly_ affecting the sustain. As someone stated, in real life physics there are never completely isolated phenomena but you can draw a line whether a factor is significant or not. John's comment above would support the more dense wood to be better but my guess is that when it comes to the sound that is audible to human ear, the material does not count. How a guitar feels is a totally different matter and shapes the way the player hears the sound drastically. My intuition says that lighter wood might convey the vibration to the players body which would partly exlpain Butch's experience with guitars with different materials. I've never thought about that before but do find anything else than the strings resonating (springs, screws..) uncomfprtable.
I keep coming back to this point because it’s absolutely essential: learn how to solo over chords. I don’t mean simple chord arpeggiating, even though that has its place, too. If you can follow the chord changes with smooth, soulful playing, you will never be fenced in. You can drop into any style, any band, and any situation. Most of us get stuck playing a given scale pattern for years before something shakes us up. Make this the foundation of your learning with this book.
In this guitar lesson you’re going to learn 7 of the most basic guitar chords for beginners. These beginning guitar chords are the first ones every guitar player should learn. They are sometimes referred to as open position chords, because they are played in the first few frets of the guitar and all contain at least one open string. If you are looking for easy guitar chords for beginners, these are the ones to start with.

I have 2 Kent guitars. One like a Strat and one 12 string hollow body. I know they were made in the 60s and were distributed by Kent Musical Products. Address:5 Union Square, New York. 10003. And they were a subsidiary of Buegeleisen & Jacobson, Inc. Any further info on these would be appreciated. Most sold in the price range of 100 dollars and up.
This site is for information only - we don't sell vintage guitars - but do check out our Vintage guitar collectors pick list: a regularly updated selection of rare guitars, vintage catalogs, or unusual items currently that we've found for sale on the web. We especially like to feature Vintage guitars with a story! If you're selling something interesting yourself, get in contact and we can help promote your item.
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use a worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.[18]

We will use the remaining pole to switch tone pots. Typical strat wiring has two tone controls – one for middle and one for neck pickup. We want to switch neck/middle tone control on when neck/middle pickup is on. To do this, common terminal of the second pole is connected to the common terminal on the first pole (pickup output) and neck and middle terminals of the second pole are connected to their respective pots. When neck pickup is on, the second pole will switch the output to the neck tone control as intended. What happens in position 4 (both neck and middle pickups on)? Both pots will be switched on and will be in parallel. Moving any tone pot would change the overall resistance to the tone cap and change the tone. The result is below:

The Effect: Even though acoustic electric guitars are generally not associated with various guitar effects, using some can be very beneficial to your tone. Naturally, the types of effects you are going to use will differ from those used with electric guitars quite a bit. The most common accessory in an average acoustic electric signal chain is a preamp pedal. Something like LR Baggs Venue DI is a perfect example. This preamp allows you to boost the signal being fed into the amp or PA, but more importantly, shape it in a way that enhances your tone. Aside from preamps, many guitar players like to use various modulation effects, delays, reverbs and similar. General consensus is that overdrives and distortions are not something you would want to hook up to your signal chain. If you are frequently performing on stage, having even a simple effects chain can be a real game changer.

For someone who’s been playing for a while, your options are a little different. Perhaps they’ve got a certain guitar in mind. If so, get them what they want! Chances are they’ve already done their homework and have their eye on their next guitar. If they’re not sure, you can still make an educated purchase. There are many popular options that should satisfy most experienced players. And there are many lesser-known models that can be the right fit for someone with more specific tastes.
Despite the fact that there are many great beginner guitars out there, Ibanez holds the title of owning starters designed specifically for metal. The way they have achieved this reputation is quite ingenious. They have delivered the same body style shared with their higher-end models. Ibanez GRX20ZBKN is a good example. It is a basicguitar that packs a mean punch.
While it definitely looks unique with its four sharp edges and sculpted cutaways, this guitar follows conventional super strat design, starting with a basswood body that is joined to a maple neck. For its price, its quite surprising to find that this guitar features a neck through design, which is normally only found on more expensive electric guitars. The 25.5" scale neck is topped by a 24-fret rosewood fingerboard with a nut width of 1.65", providing a familiar shred friendly feel. Giving this guitar its metal friendly voice are two LH-150 Humbuckers that are hot enough for mean high gain metal tones.
Every beginner guitarist deserves to learn on an instrument that's built by experienced craftsman who use only the finest materials. However, for many novice players, it's difficult to know for sure what's considered a high quality instrument. To make things easier, many popular guitar brands offer guitar value packages. These packages consist of all the essential pieces of equipment that a learning guitarist would use in the developmental stages of their playing. Within this section, you'll find more than enough guitar value package options to choose from.
If you’ve read our full reviewof the 50s Stratocaster, you’ll know that this Classic Vibe Stratocaster is an excellent prospect for any beginner who loves the good old days of rock n’ roll! Made by Squier, this 50s-inspired electric has huge vintage appeal, with a modern feel thanks to a trio of Alnico III single-coil pickups and a smooth, modern C-shaped maple neck (with 21 medium jumbo frets).
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.

The size of your strings affects your playability, depending on the genre you're working within.  If you are a Blues player who is going to bend strings constantly, you may prefer a lighter gauge of string to offset your workload.  If you are a Jazz player who will never bend more than a quarter step, you can afford to play thick, flat, wound strings.

By the fall of 1956, Daniel started making the Silvertone and Danelectro lines using the standard Dano materials: a Poplar wood frame (that comprised the sides, neck and bridge block of the guitar), stapled together and covered with 3/8" thick masonite. The top and back was painted, but the sides were covered in a vinyl material to hide the unpainted poplar wood frame. Also the now infamous "Lipstick tube" pickups were used. These pickups had an alnico bar magnet and coil measuring 4.75k ohms wrapped in brown vinyl tape. The pickup guts were placed inside surplus, chrome plated, lipstick tubes. These pickups were actually the same as previously used and hidden beneath the pickguard. Just now they were adorned in lipstick tubes and mounted in cutouts in the masonite body. Construction methods stayed this way for most models throughout Danelectro's history.
Some Craigslist and EBay sellers have been claiming the 500 and 600-series Kents are made by Teisco. I think we’ve shown that that’s not the case. Some sellers also describe those early Kents as having “Ry Cooder” pickups. As most of you know, Ry Cooder is an incredibly talented multi-stringed-instrument musician. David Lindley, another great talent, gave him a pickup from an old Teisco guitar. The photo at left is exactly like it. Cooder put the pickup into one of his Stratocasters and liked the sound so much that he got another one and put it into another Strat. These pickups are also described as “gold foil” pickups. There are variations in the pattern of cut-outs on the chrome covers of different pickups. I don’t know if the others sound any different, but if I were looking for a “Ry Cooder Pickup”, something like the one pictured here is what I would be looking for. The pickups have become worth more than the guitars they are on, consequently, as the guitars are bought up and trashed for their pickups, their prices are going to rise.
This website is not affiliated with the Samick Musical Instrument Mfg. Company in any way. We do not deal in the buying or selling of instruments of any kind, nor do we offer evaluation services for your instruments. Most prices listed are MSRP, taken from catalogs and price lists, and have not been adjusted for inflation (unless specified) and do not reflect the actual street value a model may have sold at. More on prices here: MSRP.
I have owned a Mesa Boogie Dual Rectifier for 5 years now and couldn't be happier! Granted, the amp took a long time to dial in my perfect tone, but it was a good way to familiarize yourself with the amp. If you want cleans, crunch, distortion, and a wall of gain that is big enough to destory small islands than this is the perfect amp. Not to mention, the customer service is out of this world! About a month after purchasing the amp Mesa Boogie called to make sure everything was okay and I was enjoying the amp. They also ask you to take a questionnaire on how the sales person performed. Great company, Best amps.
Hmm… you still want to buy an electric guitar first up? Okay, but again spend extra money on a guitar that plays well, will keep its value and feels perfect in your hands. In other words, don’t focus too much on paying for extras like custom pick-ups, locking nuts and electronics you don’t need just yet. At the moment it’s all about fingers and hands, not foot-pedals.
No-load pots – also used by Fender, these pots have the clockwise lug disconnected from the resistive strip within, resulting in infinite resistance between the wiper and the other outer lug when turned fully clockwise. These are sometimes used as tone controls, to remove the load on the pickup(s) presented by the pot and the tone capacitor when turned to 10.[10]
{ "thumbImageID": "A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000", "defaultDisplayName": "Hohner A+ AS355CE Solid Top Cutaway Dreadnought Acoustic-Electric Guitar With Gig Bag", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000205693", "price": "339.99", "regularPrice": "339.99", "msrpPrice": "339.99", "priceVisibility": "1", "skuUrl": "/Hohner/A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst-1500000205693.gc", "skuImageId": "A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000", "brandName": "Hohner", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
One of the most impressive guitars on this list when it comes to style is this C-1 SGR from Schecter – a respected brand in the world of rock and metal. With a design that’s heavily influenced by their premium C1 models, this affordable alternative features a solid basswood body that’s arched and contoured for great comfort, allowing unhindered access to the 24-fret maple neck.

Its the type of clipping you would expect to hear from a tube amp that been naturally gained up by cranking the volume levels really high.  Some players refer to this sound as Crunch.  These Overdrive pedals, such as the famous Ibanez Tube Screamer, can also be doubled up to give two gain stages:  Slight Crunch and Creamy Velvet Lead.  They sound as good as they might taste, if they were flavors of cereal or ice cream.  Many players found their tone by using two overdrive pedals back to back.

The controls are fairly conventional – one tone and one volume control, each located at the end of a neck, plus a neck selector switch. The switch is mounted on a plastic “bridge” that spans both necks. Each neck features Valco’s usual plastic nut and combination bridge/tailpiece, and the fretboards are similar to ones found on a variety of Valco steels.

He assumed the stage name Muddy Waters and released a series of historic recordings on the legendary Chess Records label. These discs established the quintessential Muddy Waters persona—the jive-talkin’, sharp-dressed, tough-as-nails, mojo-workin’ Hoochie Coochie Man. Waters’ confident, cocky vocal delivery was augmented by the knife-edge drama of his bottleneck guitar leads. This steely, highly electrified sound galvanized a new rising generation of British rock musicians when Muddy first visited those shores in 1958.

This particular Duo-Jet belonged to a right-handed gentleman who had owned and played it upside down from 1971 to 2008. The Duo-Jet was Gretsch’s answer to the Gibson Les Paul Custom, and the overwhelming majority of these were black, with a sprinkling of Cadillac Green from 1956-1958. In addition, the single-cut Silver Jet 6129 was offered with some custom sparkle colors from 1954-1960. This guitar was refinished in Orange a long time ago, before the second to most previous owner acquired it in 1971.
* The guitar has a mahogany neck, but a basswood body. Do not let anyone tell you this is a bad thing. Basswood is a completely acceptable wood for musical instruments. It is not worse or better than mahogany or maple. It is just different. Once again, the differences involved will probably be irrelevant when added into all the other things that players do with amps, strings and pedals to create tone and sound from an electric guitar.
We recommend you choose the headstock shape that appeals to you most. The shape of the headstock does not significantly affect the sound or performance of the instrument. Some of our headstock shapes are pointier, which means they can get damaged more easily when dropped or bumped. Choose from our existing shapes, or, send us a drawing of your original design - we can build that, too!
ESP calls the body shape "Eclipse", which in the case of this guitar, is crafted from mahogany and paired with an arched flame maple top. The body is then wrapped in amber sunburst finish that complements the beautiful grains of the top. The guitar has a maple neck with a thin U profile and a 24-fret rosewood fingerboard. It is meant to play fast and smooth, with its 24.75" scale length and narrow 1.65" nut width. ESP opted for two Seymour Duncan pickups for this guitar, the '59 Humbucker for the neck and the hotter JB Humbucker on the bridge - both of which can handle both clean and high gain tones.

I don't have enough good things to say about this shop.  Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings?  Well, this ain't that shop.  James, the owner,  is super helpful and knowledgeable, and stocks his shop with really top quality gear.  I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection).  That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well.  
Delay is a commonly-used effect where the pedal repeats your sound at pre-determined intervals after you’ve played it. It’s used almost exclusively with a clean guitar sound, although can be employed as a kind of quasi-reverb sound to flesh out a guitar solo using a driven sound. Predominantly though, musicians love delay because it’s a brilliantly creative tool where ideas can start coming out of nowhere just through experimentation. By setting the repeated sound to play back at longer intervals via your delay pedal, e.g. around a second or longer, you can play a note and then embellish it with other patterns before the original note has even played back. This type of effect lends itself well to solo playing, as evidenced by its more advanced sibling; loopers.
It’s yet another Hal Leonard book (that guy really wanted you to learn to play), with the same audio perks as the guide above. This guide is perhaps a little over the head of most beginners, but if you grapple with it early, the rewards could be considerable. Fourteen scales across 96 pages means this isn’t an enormous volume of information to digest, so give it a whirl.
When guitarists sit around and debate tone, they pontificate on the properties of this instrument or that amp. But frequently there’s a factor in the equation that is forgotten. Our templates of what we consider to be great tone are not simply a formula of instrument + amps + musician. Recording studios also play a vital role in the creation of those sounds.
Some people just need to play loud. It’s all they know and it’s all they want to know. If that’s the case, you might want to invest in some acoustic foam, and begin to soundproof your practice space. This will not only keep the sound level to a minimum for people in the other rooms, it will also represent the first step in transforming your space into a legitimate in-home studio.
The same no-compromise attitude that gives the Newporter Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech - NuBone nut and saddle for greater sustain and a Fishman preamp system that makes it easy to plug in without sacrificing the guitar's natural sound. Its lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style, and its walnut fingerboard and bridge further augment this instrument's vibrant tone.
SOLD OUT! Takamine EF406 RARE Here we have a RARE and GORGEOUS 1999 limited Edition Takamine acoustic-electric guitar, model EF-406. This instrument is a PREMIUM example of a New York or also called a Parlor guitar and is a Hand Crafted in Japan model an amazing example of Japans high Quality workmanship & fit & finish and is truly just as good as it gets. As you can see from the pictures, it is simply gorgeous to look at. It has a classic slotted headstock with Top Quality gold open gears and gold tuners with Pearl buttons. The Top- Back & sides are all a High grade choice AAAA FLAMED KOA with natural Koa color (there is no stain)and none was needed to bring out the AWESOME grain patterns of this Rare Native Hawaiian Wood. The top sound hole apears to be bound or painted and inside looks same as out /all Takamine internet information leeds to say the tops on this model is solid however we can not guarantee this as fact. The electronics are a GRAPH-EX pre-amp system: peizo transducer, with "exciter," volume, bass, treble, and mid controls. It comes with a deluxe, plush hardh shell case, note: In he picture close up of the ack of the headstock you may notice a dull spot running threw the center over the made in Japan tag area this is just a spot of waxed area that was inadvertently missed and not rubbed out... it is fine this guitar is in Excellent used condition. .

Others, however, will look to Jimmy Page, Pete Townshend, or the Beatles, or credit the first recorded use of a fuzz box in Britain to Big Jim Sullivan’s performance with a custom-built Roger Mayer fuzz on P.J. Probey’s 1964 No. 1 hit single ‘Hold Me’ (according to Mayer himself)—or, supposedly, Bernie Watson’s solo on Screaming Lord Sutch’s ‘Jack The Ripper’ in 1960. Or, a little later, the one more of us remember, Keith Richard’s worldwide smash-hit fuzz riff for the Stones’s ‘(I Can’t Get No) Satisfaction,’ courtesy of a Maestro Fuzz-Tone.
I played power cords and picked blues sounds 15- 18 years ago and started back playing but decided to learn actual cords I never actually learned anything about strings back then my girlfriend at the time had three awesome guitars so I was able to read tabs and just play so what's a good set of strings for someone who can pick the blues but is a beginner in ways at learning actual cords I was told the guitar I have is four years old and never been restung
Perhaps the most dramatic of ambient mic techniques, though, comes courtesy of Chris Tsangarides. His 'Vortex' involves using studio screens to build 30-foot-long walls along each side of the guitar cabinet, creating a flare shape (apparently inspired by the shape of a bass bin). Within this flare, he places a close condenser mic and typically another couple of condenser mics with different distant positionings, perhaps at 15 and 30 feet away. "I walk around while the guy's playing and find a sweet spot and put the mic there", says Chris.
{ "thumbImageID": "Pro-Mod-So-Cal-Style-1-HH-with-Floyd-Rose-Left-Handed-Electric-Guitar-Black/J48559000001000", "defaultDisplayName": "Charvel Pro-Mod So-Cal Style 1 HH with Floyd Rose Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000035005", "price": "929.99", "regularPrice": "929.99", "msrpPrice": "1,282.74", "priceVisibility": "1", "skuUrl": "/Charvel/Pro-Mod-So-Cal-Style-1-HH-with-Floyd-Rose-Left-Handed-Electric-Guitar-Black-1500000035005.gc", "skuImageId": "Pro-Mod-So-Cal-Style-1-HH-with-Floyd-Rose-Left-Handed-Electric-Guitar-Black/J48559000001000", "brandName": "Charvel", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The AC15C1X is a modern take on the venerable AC15, with improved reliability and built-in effects. Vox's familiar clean and overdriven tone is ever present, courtesy of its three 12AX7 preamp tubes and two EL84 power tubes that drive a 12" Celestion Alnico Blue speaker - a speaker that many Rock and Blues players prefer. The amp has a dedicated Top Boost input for those who want Vox' distinct jangly tone. Finally, it comes with tremolo and reverb effect to add space and texture to your guitar tone.
[author image=”” ]Alan Steward is a Producer, Engineer and Musician with over 30 years experience in the music business. He worked with Grammy winning artists from the Temptations to the Baha Men. His music has been used in TV shows and feature films. He is also well-known as a producer of loops for music production and owns a recording studio in Germany.[/author]

In the ideal scenario, once set, your saddles should neither be flush down on the bridge assembly of the guitar, nor extended so high they could go no further. This saddle height relative to the bridge assembly is a reflection of the neck angle. If the saddles sit flush, the neck angle is not set back very far and vice-versa. This is where you should decide if your neck angle is in need of adjustment ( if you have a bolt-on neck). Check the measurement at the 12th fret then progress up the neck, measuring every couple of frets. The string height should continue to gradually rise, if it doesn't the neck is set back too far and has to be tilted up just a little. This is a very sensitive adjustment and the thickness of a couple sheets of paper can make a big difference. Some Fenders have a neck tilt adjustment screw that is accessed with an Allen wrench through a hole in the neck screw plate. The strings must be loosened, then the neck screws, then the tilt adjustment screw is tightened or loosened. Never do this when the neck screws are tight! If you don't have a tilt adjustment, thin shims of wood veneer are fitted in the neck pocket to adjust neck angle. Uneven frets are also a possibility. If , after having followed all the above steps, you are still getting fret buzz, you must establish that the frets are all even. But this leads us to fret dressing, which is another story altogether.
Guitar Neck wood Fingerboard Blanks Electric guitar wood Burl Poplar 1pc Walnut Spalted Apple Burl poplar Spalted Maple Olive Spalted Walnut Burl Elm African Mahogany body wood Red Willow 1pc body blanks Plum Red Willow 2pc body blanks Spalted Birch Pear Mulberry Maple Acoustic / Classic guitar wood Flute and Oud blanks Pool Cue wood blanks & Wood Turning Gallery Sold examples Custom Wood Products Binding wood NEW! Gun Stock Blanks
: I have a similar guitar to the one you bought. It was my grandmothers and I'm estimating it at over 30 years old. Very folk style. She told me she actually had the original strings from when she bought it! I believed her when i tuned the thing and the day after found that the 4th and 6th had snapped. From what i know, Decca just made guitars around that time, 60's to 70's. Mine says it has a steel reinforced neck and it is really heavy compared to others. its still in really good shape and I actually play it. I'm not planning on selling it but I know its well worth its age. It has a hand chissled Ser. # on the bridge.
Two new models that would eventually become mainstays joined the Teisco line in ’65. Theye were two double cuts with slightly more flared horns, in a sort of tulip shape. Both had a single, wide, chrome-covered pickup with poles exposed along one edge. This was similar to the old MJ-1 but by ’65 would become the new SM series. Both had bolt-on necks with bound rosewood fretboards and the top-edge rectangular inlays. The E-100 had a bridge/tailpiece assembly, volume and tone on a small pickguard, and one of the elongated Strat-style heads. The ET-100 had a platform vibrato. As a sign of things to come, the Teisco Del Rey ET-100 had a regular Strat-style headstock, the first to appear on Teiscos, as far as I’m aware.

{"eVar4":"shop: guitars","eVar5":"shop: guitars: guitar value packages","pageName":"[mf] shop: guitars: guitar value packages","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: guitar value packages","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"guitar value packages","prop5":"[mf] shop: guitars: guitar value packages","prop6":"[mf] shop: guitars: guitar value packages","prop3":"[mf] shop: guitars: guitar value packages","prop4":"[mf] shop: guitars: guitar value packages","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}

In general, using an acoustic electric guitar expands your possibilities. You are no longer limited to the volume the guitar itself is capable of producing, which can come in pretty handy at times, nor having to mic an amplifier either. With an acoustic electric, you can perform in just about any venue that's worth its salt, without dealing with close miking and a lot of post-processing like equalizing out the boomy low-end.
Starting in January 1999, Taylor guitars are made with a patented bolt-on neck; the NT neck (new technology). It differs from other necks by using a continuous piece of wood all the way to the 19th fret to support the fretboard.[7] The standard practice is to support the fretboard up to the fourteenth fret with the unsupported portion being glued to the constantly moving soundboard. The NT neck fits into a pocket on the top of the guitar body with the desired angle being achieved by small, accurately milled neck spacers (shims). Over time, some guitars require the neck angle to be realigned (referred to as a neck reset). This process is greatly simplified by allowing the replacement of different sized neck spacers to return the neck to the required angle. Prior to 1999, Taylor Guitars had a simpler bolt-on neck. These guitar necks allow for simple adjustment later if needed. Traditional (Non-Taylor) guitars with a glued neck with a dovetail would need to be disassembled to be adjusted.[8][9]
The Effect: By all standards, tremolo is one of the oldest, as well one of the simplest effects you can get these days. The whole idea behind a tremolo pedal is to give you that wave type effect by reducing and increasing the volume of your guitar’s original signal. You can adjust the speed of the effect and how deep those dips in volume are going to go.

The display borrows a lot of its design cues from Guitar Hero—which is probably a good thing, since so many players are already familiar with that system. Like GH, Rocksmith has vertical columns to show you which frets to hold, and the notes move toward you until they reach a line that represents the moment you're supposed to play them. However, GH's display didn't need to move since there were only five buttons. Because it has to span the entirety of an actual guitar neck, Rocksmith's display floats up and down. If you're playing primarily notes between the fourth and seventh frets, for example, it will show you just those frets on the screen, then slide up to the 10th or 11th when it's time for you to play those.

The body was perfectly flat and the sanding sealer that was on it was great. I however in wanting a finish that was like a mirror used a enamel filler primer. The body was then shot with 6 coats of enamel black, wet sanded, and hung up to cure for 2 weeks. After curing the body was then shot over a matter of another couple of weeks with 10 coats of clear (remember that temperature and humidity have an effect ... full review
The Schecter Hellraiser C-1 Electric Guitar features a solid mahogany body that guarantees durability, along with a set-neck having ultra access. There is hardly a guitar which sounds great in regular, single-coil configuration, also in humbucker mode, but that’s what the Schecter does; having excellent sustain. The set of this guitar was great out of the box, while the fingerboard is good, smooth and quick.
Depending on the type of music you're playing, you may actually want your compressor pedal at the end of your chain. For example, if you're playing country music, a compressor pedal at the end of the chain squashes everything, regardless of the effects you're using. With rock music, on the other hand, it typically works better right after the filter pedals.
Founded by a father and son, Ryohei Tahara and the unknown Tahara. I do not know which was the father and which was the son. The company existed until the late 1979 when it was bought up by Saga Musical Instruments. In all, the company existed less than a decade as Tahara. Both the Maya and El Maya badges are attributed to Tahara. Saga Musical Instruments exists to this day.

{ "thumbImageID": "Casino-Electric-Guitar-Turquoise/518295000002000", "defaultDisplayName": "Epiphone Casino Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Turquoise", "sku": "sku:site51500000240455", "price": "649.00", "regularPrice": "649.00", "msrpPrice": "1,082.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Casino-Electric-Guitar-Turquoise-1500000240455.gc", "skuImageId": "Casino-Electric-Guitar-Turquoise/518295000002000", "brandName": "Epiphone", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cherry", "sku": "sku:site51275860129473", "price": "649.00", "regularPrice": "649.00", "msrpPrice": "999.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Casino-Electric-Guitar-Cherry-1275860129473.gc", "skuImageId": "Casino-Electric-Guitar-Cherry/518295000019000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51275761455180", "price": "649.00", "regularPrice": "649.00", "msrpPrice": "1,082.00", "priceVisibility": "1", "skuUrl": "/Clearance/Epiphone/Casino-Electric-Guitar-Vintage-Sunburst-1275761455180.gc", "skuImageId": "Casino-Electric-Guitar-Vintage-Sunburst/518295000015000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51275761455075", "price": "649.00", "regularPrice": "649.00", "msrpPrice": "1,082.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Casino-Electric-Guitar-Natural-1275761455075.gc", "skuImageId": "Casino-Electric-Guitar-Natural/518295000010000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

This guitar continues to rake in good reviews and recommendations, even from experienced players who are looking for a compact couch guitar. This says much about its build-quality, tone and production consistency. If you are just starting out and you are not sure what to get, or you're simply looking for an affordable grab-and-go guitar, then checkout the Yamaha JR1.
Small-diaphragm condenser mics, on the other hand, tend to have flatter frequency plots and a better-behaved off-axis response, giving a sound sometimes described as more focused, but they seem to be less commonly chosen by the interviewees than large-diaphragm ones. Neumann's KM84 seems to be the most regular choice of small-diaphragm condenser, and numbers John Fry and Bill Price amongst its high-profile users, while Sennheiser's MKH40 warrants a particular mention from Mike Hedges: "I started using [these mics] when I was working with the Beautiful South. I started off with two and now have more than 20. I think they were originally designed for classical recording, because they have very high gain and very low noise. This means that you can get a very clean sound. They also accept massive amounts of volume, so you can put one against a guitar amp on full and it will take it." Hedge's concern about the ability of the microphone to handle the sheer volume of some guitar amps is echoed by several of the other producers, who make a point of mentioning that they switch in a condenser's 10dB pad when recording electric guitars.

Scale Length – Scale length of a guitar refers to the length of the strings and it is measured from the nut to the bridge. Guitars with longer scale length have tighter string tension with a brighter tone and well-defined low end. Guitars with shorter scale length have less string tension which allows easier bending of the strings and it offers warmer tones.

While I have been able to find ways to get it to work for me most of the time, I have found that the controls for the video looping feature are not as precise as I would like them to be. There is definitely room for improvement. Another thing that I am missing is the option to control the speed of the video playback. Some competitors allow for the video playback to be slowed down or sped up while retaining the correct pitch. Guitar Tricks have been listening – Improvement have been made!This is a great help if you want to practice to play along at a slightly slower speed or if you want to review something in more detail. Luckily I have found a little helper too that allows me to control the speed of the video until Guitar Tricks are including this feature into their video player. I am using the MySpeed tool from Enounce. They advertise it to speed up videos to save time watching them. It also works a treat slowing videos down.

Welcome to  We're a the online Kay Vintage Reissue web site of Rock N Roll Vintage Inc., a Chicago based internationally known vintage guitar dealer.  Kay currently offers the "Street Series" and a "USA Recording Studio" lines.  Kay plans to offer reissues of 12 popular models including the Barney Kessel and the Jazz guitar and bass lines.   The Street Series are authentic reproductions of Classic Kay guitars and basses.   The Recording studio series will offer models with exceptional hand built custom shop quality.  We offer the complete line of Kay Vintage Reissue Basses and Guitars.   These Kay reissue guitars and basses look amazing and play even better.  Currently the Kay K161V Thin Twin and K775V Jazz II guitars and K162V Pro and K5970V Jazz Special basses are available.
Rickenbacker continued to specialize in steel guitars well into the 1950s, but with the rock and roll boom they shifted towards producing standard guitars, both acoustic and electric. In 1956, Rickenbacker introduced two instruments with the “neck through body” construction that was to become a standard feature of many of the company’s products, including the Combo 400 guitar, the model 4000 bass, and, later, the 600 series.
Our guide to guitar strings, the hope and savior of beginners across the world. We're going to cover the types of guitar strings, how they're made, the best brands, the standard gauges, how to pick the right ones for your instrument and style, what to expect in terms of cost, and much more. Take a ride with me through Ledger Note's guitar string guide...
You might have read our review about the C40 GigMaker kit from Yamaha earlier on. This is a similar guitar, but it’s the C40II, and the black color makes it a limited edition instrument. The inlay is less “traditional” looking. Instead of an ornate “rosette” style, the inlay is a stripe pattern all the way around the sound hole, making the guitar look somewhat “jazzy,” to use a more descriptive term. So if this is the look you prefer, read on for more details.
Use of a slide or bottleneck. The term slide refers to the motion of the slide against the strings, while bottleneck refers to the material originally used for such slides: the necks of glass bottles. Instead of altering the pitch of a string in the normal manner (by pressing the string against a fret), a slide is placed upon the string to vary its vibrating length and thus its pitch. The slide can be moved along the string without lifting, creating continuous transitions in pitch.
Tube or solid-state? One has the nice warm vintage tone, but the other is just so much simpler and free of hassle. Vox make one of the best hybrid amps, which heats up your guitar signal with a proper 12AX7 tube in the preamp before it becomes amplified by conventional transistors to deliver up to 30 Watts. A warm tone with smooth overdrive, but without the aggravation.
If you want to splurge just a bit more and opt for an instrument with a little more stylistic range, the Ibanez Talman guitar vault accessory kit might be right up your alley. It includes a lovely seafoam green Ibanez TM302SFG, 12 high-quality Dunlop Tortex picks, a strap, a gig bag, a Kyser capo, a polishing cloth, and a tuner. This is off the beaten path a bit, but for some players, that’s going to be absolutely perfect.
On electric guitars, you do a lot of plugging and unplugging of your cable, and these actions can eventually loosen the output jack, causing a crackling sound through the speaker. This crackling indicates a disconnected ground wire. To fix this problem, you first need to take off the jack plate or pick guard and locate the detached wire causing the problem.

An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.
Just plug your guitar into the sound card input, start Guitar FX BOX and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice and other inputs. This sound processing program is acting just like a good collection of guitar effects pedals. You can use several of them at the same time, even all if you need so.
As similar as the two instruments are, bass guitars have enough differences from electric guitars that bassists should definitely look for effects designed specifically for their instrument. By doing that, you’re getting a pedal balanced for the low-frequency dynamics of the bass, and built to help it blend better with the other instruments in the band. Many bass effects have the same purposes as guitar effects described above, including chorus, reverb, delay, phaser and tremolo.
The inlays are the little shapes that are installed in the instruments neck/fretboard. Inlays do not make a significant difference in the sound of the instrument. They come in various shapes and materials. Inlays allow a player to quickly see where certain positions are located on the fretboard. They are also a great way to decorate, or personalize an instrument. Choose among our existing inlays designs, or send us a drawing of your own designs. Some popular inlay designs are band logos, initials, corporate brand logos, or tribal designs.
This was my first attempt on building pedal. Now I'm hooked. It was such a joy putting it all together and quite a learning experience. I cannot emphasize on reading/studying the instructions thoroughly. I would rate the included instructions a 10, a 5 STAR. Very clear and easy for a novice pedal builder to understand and walk through. Very well illustrated as well. Take your time as you can easily overlook soldering connections. The main problem I encountered was a shorting problem. The two soldering terminals along each side of the tube socket were located very close to the tube base socket and volume/gain pots. Follow the instructions by running a wire between the volume and gain pots, as well as the tube socket. Once, I've addressed this problem, it was clear sailing from there.
Guitars with better-quality electronics can avoid these traits to an extent, but as you can see when you turn the tone pot all the way to zero, the dynamics of the RLC circuit that the pickup and tone circuit create result in a “hump” in the upper bass/low-midrange frequencies, roughly centered (in this example) around 300 Hz. This happens because the low resistance, coupled with the high “capacitive reactance” of the capacitor and the “inductive reactance” of the pickup’s inductor, creates what’s known as a “band-pass filter”, where a specific frequency range in between very low and very high frequencies has the lowest total impedance and thus becomes the most present in the tone.

Guitar models currently include the Master Class, American Series, Oregon Series, Cascade series, Atlas series, Passport Plus, and Passport, as well as 12-string models and Bass models. The Voice series, reviewed by Guitar Player in 2012, was praised for the quality of construction and various innovative elements, including a “Tru-Voice Electronics System” which, according to Dave Hunter, “for live performance … comes closer to a seamless acoustic-to-amplified transition than virtually any other flat-top I’ve played.”[2]

* 3 most basic reverb modes: Room: Simulates the spaciousness of a room; Hall: Simulates the spatial dimension of a music hall; Plate: Simulates the unique reverberation character only coming from a plate reverberator. * One reverb control balances the dry/wet signal, simple enough to dial in the perfect amount of reverb for your tonal needs. * True bypass for zero tonal coloration. * Extreme mini size for great compactness. * Heavy-duty metal casing for great stability and durability; Connectors include input, output, and power supply; Powered by 9v DC. W/ a 6 inch patch cable included. SONICAKE Digital Reverb is reverb pedal designed to add dimension and spaciousness to your tone. It is extremely straight-forward to use with only one “Reverb” knob to adjust the balance between the raw d.

Smaller players, musicians who travel frequently, and parents shopping for children, may also want to consider travel and mini-acoustic guitars. These guitars were designed for the comfort of smaller players, and for convenience when traveling, but many guitar manufacturers have invested significant time and resources into creating smaller-scale acoustic guitars that don't compromise quality or sound.

Carvin is a guitar company with a different business model than the rest. You won’t find them at your local music store because Carvin only makes custom guitars. Their instruments are based around a handful of templates and each feature components that are individually chosen by the buyer. For this reason, it’s very rare to find two Carvins that are completely identical.

i have an original 12string vox mark XII and i would like some parts (original or replicas) to repair it. For example the neck(is the right word?)has a surious damage and i want to replace it, also i miss the tremolo stick and the circle black plastic stuff fit the back side. i need some connections all around the world but it could be better if i ll find something in europe. please help-mail me and sorry for my english syntax. dimitris from athens greece.
Randall deserves to be up here in this list. Don't get me wrong, they've got a lot to contend with, in Orange and Mesa Boogie in particular, but Randall have always crafted excellent amps. Rugged build and vast tonal opportunities make this brand a mighty force, I mean they were good enough for Dimebag Darrell and countless others, enough said really...
I was just old enough to catch the tail end, but many folks remember the days of the record store.  Large vinyl albums, huge artwork, leafing through the stacks….it was a cool time that lasted longer than the days of cassettes, 8-tracks, and CDs.  Nowadays, most music buying is relegated to the online variety.  But there was a time during the 1960s where record stores were THE place to get your music, and musical instruments!That’s right, in window displays or hanging above the stacks of vinyl, guitars like these were waiting for teenagers.  Again, just a cool time!  This Decca guitar was sold through Decca Record stores.  In early 1966, Decca Records jumped into the electric guitar frenzy.  This was around the same time when CBS has bought Fender and only a few years away from MCA buying Danelectro. Curiously enough, Decca Records was a subsidiary of MCA.Anyway, Decca and many other companies saw the potential profits of electric guitar sales and quickly tried to capitalize.  There was a whole line of guitars, amps, and accessories, all imported from Japan.  The entire instrument line was handled through Decca’s 21 branches and distributors throughout the USA, but the company seemed to concentrate on the east and west coasts.  There was also a Decca subsidiary in Canada as well.This particular guitar was made by Kawai, and featured a design that was semi-exclusive to Decca.  Kawai was producing and exporting thousands of guitar to the USA at this time, and Kawai’s prices were very competitive, but Decca decided to go with an (as of this writing) smaller, unknown Japanese company to produce the guitars.  Many of the Decca electrics featured non-adjustable truss rods and just seemed to always be on the “cheap” end.  But some of the them did sound very good.  Sometimes you’ll see some really odd Decca electrics that literally copied the Teisco look from the same time period.  There were also some cool hollow bodies with set neck designs as well as the late 60s  line of guitars, like the DMI 231 pictured below.
The Vox brand was also applied to Jennings's electronic organs, most notably the Vox Continental of 1962, whose distinctive trademark "wheedling" tone was immortalised by Alan Price on the Animals' track "House of the Rising Sun". In 1962 the Vox Continental was given to The Echoes to trial on stage and use on records they cut with Bert Weedon and Dusty Springfield as well being featured on their version of "Sticks & Stones" 1963 as well many other records, and later used by Paul Revere of Paul Revere & the Raiders, as well as Ray Manzarek on most songs recorded by The Doors and by John Lennon on The Beatles' track "I'm Down", both in the studio and live at their 1965 Shea Stadium concert. Doug Ingle of Iron Butterfly used it on "In-A-Gadda-Da-Vida" and other songs of the group. Mike Smith of The Dave Clark Five and Rod Argent of The Zombies also made frequent use of the instrument. Peter Tork of the Monkees can be seen playing the unusual looking Vox organs several times during the Monkees TV series (1966–1968). In newer popular music, the organist Spider Webb of the UK garage band The Horrors can be seen using a Vox Continental. A famous Vox organ riff can be heard on "96 Tears" by Question Mark & the Mysterians. Benmont Tench of Tom Petty and the Heartbreakers has frequently used his vintage 1965 single Continental in the studio with the band since 1976 and still uses the instrument today. Another famous signature Vox organ sound was created by Augie Meyers when playing with the Sir Douglas Quintet, as heard in the songs "Mendocino" and "She's About a Mover."
Unlike most new wave guitarists at the dawn of the Eighties, Honeyman-Scott had impeccable fashion sense. He always maintained a timeless detached rocker look, and his aviator shades, medium-length shag haircut, suit jacket and jeans attire never really went out of style, unlike the geometric haircuts and DayGlo suits that many of his contemporaries wore. He always played the coolest guitars onstage as well, from classic Gibson Les Pauls and Firebirds to custom-made Hamers and Zemaitis metal-front guitars.
Late 1934: "T" frets (aka tang frets) replace Bar frets on flat tops. (Most other guitar makers had stopped using bar frets much earlier.) Martins Hawaiian style guitars retain bar frets until at least 1938. The first Martin model to use T frets was the 00-17, introduced on a lot of 00-17 guitars #57305-57329 in 1934. Initially the first T-frets were special ordered by Martin to contain 30% nickel ("normal" fret wire is 18% nickel, 65% copper and 17% zinc). The higher percent of nickel, the harder the fret wire. This special 30% nickel fret wire was ordered from the Horton-Angell Company (the inventor and patent holder for barbed alternating "fish hook" T frets) on 8-31-1934 in an 100 pound lot, along with 100 pounds of "normal" 18% nickel fret wire. It's unclear if Martin ever used 30% nickel fret wire after this, because it was more expensive and not the norm. The same instruments also introduced the "T" neck reinforcement bar. Shortly thereafter T frets were standard. (Like with steel strings in 1922, Martin tried these innovations first on inexpensive low-end models to minimize financial damage in case the experiment was a failure.)
Whether you’re looking for the best acoustic electric guitar for beginners or a more advanced model, there are so many options that it might be tough to make the right call. If you want to learn more about some of the most popular guitars but don’t have the time to do your own research, then you can count on us to help you out. We’ve scoured the market and compared countless acoustic-electric guitars so we can recommend the best. Our top choice is the Epiphone Hummingbird Pro.
Epiphone are a well respected subsidiary of Gibson, and have been making musical instruments since their founding in what is now Turkey, Europe, in 1873. After being acquired by Gibson in 1957, Epiphone are now best known for manufacturing affordable versions of some of the most iconic guitar models around, including the Les Paul and SG. However they do make a couple of original models, such as the Casino, which was famously used by the Beatles.
{ "thumbImageID": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "defaultDisplayName": "Epiphone Tom Delonge Signature ES-333 Semi-Hollow Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Stripe", "sku": "sku:site51273888006950", "price": "599.00", "regularPrice": "599.00", "msrpPrice": "999.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe-1273888006950.gc", "skuImageId": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Let's look at how the professionals go about combining the close and ambient techniques we've looked at so far, in order to create specific custom setups for different recordings. Joe Barresi, for example, relies heavily on the trusty SM57 and MD421 combination, but he'll choose from a variety of other mics to give character to particular sounds. "The two microphones I use most for recording electric guitars are the Shure SM57 and the Sennheiser MD421, often both, close up, placed at the edge of the speaker, where the speaker centre meets the cone, or, if I'm looking for a more bright sound, dead centre. When I want more low end, I may have an AKG C414 on there, and when I'm after a little more personality, a Neumann U87, backed up a foot, or a ribbon mic, like the Royer 122, or an RCA BK5 or 77."
The L-00 carries over the airy nasal tone and midrange emphasis of the original, making it great for tasty slide and classic rock riffs. Your favorite blues licks will also have more oomph when played through this blues box. For something so small, this parlor guitar can compete with standard size acoustics in terms of volume. Its solid sitka spruce top and solid mahogany back and sides work together well to give this seemingly diminutive instrument great clarity and good low end.

{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: agile","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"martin","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Fawned over by hard rock-loving guitarists the world over, Marshall is one of the few amplification brands that really needs no introduction. And if you’re looking for aggressive, overdriven rock – this amp is one of the best beginner’s options. What makes this one really special, however, is the sheer number of sound-shaping options it gives you – thanks to its ability to model a whopping 14 MST preamps, 4 MST power amps, and 8 MST speaker cabinets. That’s 448 possible combinations, if you’re keeping score. You can even connect it to your computer via USB or use it as a Bluetooth speaker. If versatility is your top concern (it probably should be), look no further.
The Kay Musical Instrument Company grew from the Groeschel Mandolin Company (or Groeshl Instrument Company[8]) in Chicago, established in 1890.[9] In 1921, the company was renamed to Stromberg-Voisinet. In 1923, later president Henry Kay "Hank" Kuhrmeyer joined the company, and in 1928, with the help of an investor,[9] he bought the company and started producing electric guitars and amplifiers.[10]

Our original hand made guitar we’ve been building for 32 years that competes with guitars 3 times its price, the 50 Series has all the prerequisites of the traditional American guitar. Compared regularly to Martin D18 and Taylor 5 Series, but with easier playability and a lower price since you’re buying direct from our workshop in Lincoln, Nebraska. For 2018 Denny added a more detailed ivory zipper stripe binding and installed the new 2018 Fishman Isys Plus electronics system to make this guitar truly special. Shipped direct from Denny’s hands to yours. 100% money back guarantee, lifetime warranty.

If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.

SCALE LENGTH What is a "Scale Lenght?" The scale lenght is the lenght the string travels between the nut at the top of the fretboard and the bridge at the mid section of the base of the guitar. To determine the scale length of your guitar you would measure from the front part of the nut where it meets the fretboard to the center of the 12th fret on the neck and multiplying that by 2. Add about 3/16" to that on the low e string and taper that to about 1/16" added to the high e string. This is called compensation and that is why you see that tapered line on a bridge. Go to Stewart MacDonnaldfor more info. They also have a Fret Calculator that helps you determine your particular scale length in addition to a page dedicated to helping you out with tons of free info for your guitar building projects.The fret is the metal of nickle wire that is raised up off the fretboard. I would suggest buying a neck that has been pre made from a manufacturer that fits the design concept that you want to go with. I bought mine from Guitar Parts USA for about $70. You can pay anywhere from $50 to $300 for a neck at online retailers, but surf around and make sure you are satisfied with what you get. Guitarpartsusa will tell you to buy an expensive neck if you are building an expensive guitar, not a $70 neck. But for mine the $70 neck works just fine. Once you get the neck in and you determine what the scale length is you can lay it all out on paper. I recomend buying all your hardware, pickups and knobs before you draw your final template. This will allow to place everything where you want it and know what size holes to drill for the electronics and how big the cavites will need to be for them and the pickups.

The Salamander Grand made by Alexander Holm (details above) who sampled his Yamaha C5 Grand and is quite well known for having a great sound. Most sf2/sfz versions seem to be lacking the proper dynamics, have latency problems or have been oversimplified. This sf2 version has addressed these issues yet retains its essential character including optional resonance but removes other non-essential sounds such as pedal noises.
I have never reviewed anything, however felt that I had to share that this is a complete disappointment. I bought it two weeks ago for my daughters birthday and it is already broken. The mechanism to plug the amp line/chord into the guitar broke, rendering it useless. The amp itself is very cheap and the sound quality was a disappointment, crackling when in use. The strap has holes that connect the strap to the guitar, were too big and would not stay fastened so I had to tie the strap with rope to see that it stayed on while she played.
Pitchshifters change the pitch of the note played via a user-specified amount. The range of pitch deviation depends on the equipment used, but many pedals are capable of raising and lowering the pitch two octaves above and below the fundamental pitch. The amount of pitch deviation can be set or controlled via a foot pedal (which typically offers smooth, continuous pitch control). Typically, such function will be used with the original signal, resulting in a Harmonizer: the pitch is altered and combined with the original pitch to create two or more note harmonies. These harmonies are typically programmed in discrete integer multiples of the fundamental tone. When used with an expression pedal, it provides a smooth, abeit slightly digital, bend-like effect. Pitch shifters can also be used to electronically "detune" the instrument. Some examples are:
I have had very little time to play with the settings and effects, but so far it's pretty awesome! The only downsides I can find are that there is about 5ms of scilence when changing effects, but you might be able to play around that. Also, I haven't found a way to make the expression pedal affect only one effect in the chain instead of changing the overall volume, but this might just be me not understanding simple instructions.
The only guitar instrument I can think of that is NOT sampler-based and that actually sounds decent would be RealGuitar. It's not the most realistic (IMO) and it's $160+. But if you ask most people for recommendations on realistic guitar instruments, you will hear stuff like Shreddage, Electri6ity, ProminyLPC, Lyrical Distortion, Strawberry Electric Guitar from Orange Tree... all Kontakt libraries, and all undoubtedly better than the 3 products you listed in your initial post, two of which are simply synths and not at all meant for realistic playing!
The E-18 and EM-18 were basically the same guitar differing only in electronics. The E-18 featured two DiMarzio humbucking pickups, a DiMarzio PAF at the neck and a DiMarzio Super Distortion at the bridge. In addition to the regular controls, the E-18 had mini-toggle phase switch. Production of the E-18 began in April of ’79 and about 5,307 (about 1,320 a year) were made until the guitar ended in early 1982.

The aim of Audio Issues is to help interested newcomers get started in the world of audio production with easy to use practical audio production tips for beginners and advanced. If you are just starting out doing some home recording or have been engineering for a while, these quick and easy audio tips are guaranteed to be of interest and use to you.
For acoustic guitar players (and electric players) there is simply nothing to dislike about the Hall of Fame reverb pedal, unless you just dislike ambient effects in general. The HOF is one of the most well-put together ambient stompboxes we've ever used, and it's perfect for acoustic guitar tones. When you're adding effects to your acoustic guitar, reverb is one of the best suitors for several reasons.
Pitch Bend/Shifting: From a simple octave above the note you’re playing or at intervals in between, a pitch shifter effects pedal will change the pitch of your note or chord. More sophisticated pitch shifters create two or more harmony notes so you can accompany your root note for a fuller sound. Some simulate a chorus effect by providing minute shifts in pitch.
You've come to the right place.  We offer a wide range of vintage and used guitars and basses including a great selection of Fender instruments.   We're guitar players who recognize and appreciate how important Fender has been to the evolution of Rock and Roll.  Please browse our web site, give us a call or visit our Chicago show room.  We're constantly searching for Fender guitars, new gear is arriving daily and they often sells before we have a chance to list them on our web site.  

“It was just a different world,” Ford says. “There was ‘Don Kirshner’s Rock Concert,’ Ed Sullivan, Dick Clark, and they would have one band on and you would wait all week to see who that band was going to be. And you could talk about it all week long with your friends — ‘Saturday night, Deep Purple’s going to be on, what are they going to play?’ — and then everybody’s around the TV like you’re watching a football game.”
Guitar from Spain is the best online store to buy the best spanish guitars online: Classical guitars, Flamenco Guitars, Acoustic Guitars and electro acoustic guitars made in Spain from the best spanish guitar makers at spanish local prices. These unique guitars will be delivered from our warehouse or from the manufacturer's bench to your door, avoiding extra costs or double margins. Because we only sell guitars from the most reputable Spanish manufacturers, you will be assured to buy only the best spanish guitars available with 2 years warranty and certified from origin. Spanish guitar brands like Alhambra Guitars, Raimundo Guitars, Ramirez Guitars, Admira Guitars, Camps Guitars, Rodriguez Guitars or Prudencio Saez Guitars are among the most reputable and best sounding guitars in the world. These guitars are manufactured in Spain, the land of the flamenco guitar and the classical guitar. At Guitar From Spain you can also buy steel stringed acoustic guitars, western guitars and electro acoustic guitars made with the same traditional craftsmanship and know how acquired through centuries of guitar making. We also have special guitars as Bandurria (Spanish mandolin), Laud (Spanish lute), Cuban tres, timple canario and special sized guitars as Cadete (guitar 3/4) Requinto (Guitar 1/2) and Senorita (Guitar 7/8). Compare our Spanish Guitars with any other "asian made guitars" at the same price and you will be amazed with the diference in quality and sound that you can get. Do not settle for imitations, buy the original, buy Guitars from Spain.
"Like any music technology, it's just a tool to help someone express their creativity. The gear never makes the player, but there's a purpose to it in certain playing situations and that's all good. As long as some guys are not hiding the truth of their playing behind it. A good player's a good player, and they usually sound good on an acoustic guitar simply because because they can actually play the damn thing.
If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.
With the die-cast chrome tuners, you get to ensure that your guitar never gets out of tune. The natural finish and large pickguard make this instrument a true classic. You can play this acoustic instrument as it is, or plug it into a PA and let the System 53 piezo pickup amplify its sound. You also get a preamp with 2-band EQ for more control over the tone and volume.

Featuring classic Fender design, smooth playability, and simple controls, the Squier Classic Vibe Telecaster '50s is a great first electric guitar. The fixed bridge and quality tuning machines ensure simple and reliable tuning stability—a potential frustration for new players trying to learn on poor quality guitars. Single volume and tone controls along with two bright-sounding single-coil pickups give the beginning player a wide range of tones that are easy to control. The Telecaster has been a mainstay in music for decades and is especially associated with great country, pop, surf and rock sounds.

A fantastic sounding unit and U2’s The Edge original delay sounds were a Deluxe Memory Man used on “I Will Follow” and “Sunday Bloody Sunday”. Some cool added features to the Memory Man is the added chorus effect you can put on the delays. This is one of the coolest delay pedals ever. Many pedals now digitally model the sound of an analog delay pedal and come very close with the added flexibility a digital delay pedal provides like extended delay times and tap tempo.

Make sure to sit down and strum the notes when trying out a guitar. It should not be hard to push down the strings with your fretting hand, even if you are just starting out. The action should be as low as possible to make learning easy. Make sure to check for loose parts; there should be no rattling noises coming from the inside of the guide or inside of the neck. Also take a business card and run it along the bottom of the bridge to make sure that the bridge isn't coming off. An electronic system is not a big deal when buying an acoustic because it's relatively easy to add an electronic pickup component later on should you decide you need one.

The 2555X Silver Jubilee reissue has the same silver vinyl covering used on the originals, and looks just as handsome. The controls are pleasingly familiar, with a simple front panel layout featuring controls for bass, mid, treble, presence, together with a preamp gain and two master volume controls - one for lead and one for rhythm. A push/pull switch on the output master volume changes channels, while another on the gain knob flips the 2555X into rhythm clip mode, changing the clean channel into something a lot more aggressive. The third rocker switch changes the output stage mode from pentode to triode, dropping the power from 100 down to around 50 watts, and softening the attack a little. The sparse rear panel also features a series effects loop, a fixed-level frequency-compensated DI output, and a jack socket for a single-button footswitch, used to change channels. Overall, the 2555X is built to last and look good for a long time, with Marshall's typically high build quality and attention to detail. Apart from its association with Slash, Joe Bonamassa, and various other high-profile users, the main reason why 2555s are so sought after is their sound. We're pleased to report that the reissue amp is tonally as accurate as it possibly could be, with perhaps a touch more gain and low-end punch than the original. The 2555X accurately reproduces the original tone - and with a few minor exceptions, the look - of the original, at a price that's very reasonable compared with the competition, especially for a UK-made product.

This guide is as marvelously written as it is exceedingly informative. It takes a long look at each of the major and minor American guitar companies — Gibson chief among them — and recounts the story of every guitar to come off their workbenches. Buoyed by scads of historical photos and thoroughly researched copy, this book earns its place at the top of this list.
I have a Dover, it was my great uncle’s guitar. It has seen better days but considering its age its in pretty good shape. Some one did some custom wiring inside so I had to replace the pots. One of the pickups was glued back together but it wasn’t done properly so now it doesn’t quite sit right. The plastic cracked at most of the corners where the screws hold the pick ups down.

Finally, you’ll want to make sure you have the accessories you need to get up and playing fast. A strap, spare strings (they do break from time to time), and some plectrums are all essentials – and don’t forget an amplifier! You’ll also want a case (preferably hardshell, but soft and padded will do) to store and transport your guitar, and an electric tuner to keep it sounding good. These can all be picked up from your local guitar store, although if you are starting from scratch, you may want to consider a combo kit, which usually offer good value and convenience.
Capacitors are typically used as filters to control tone. In most cases, they are used to filter out very high frequencies before being sent to ground (the output jack) which controls the warmth of your guitar’s tone. Capacitors vary greatly and come in a range of materials from ceramic, film, paper and electrolytic (mainly used with active pickups).
Rather than superfluous power, I suspect the copywriter really meant something like superior!! However, then again, maybe they did get it right, because they featured a 6A6 preamp tube that was exceptionally weak and microphonic. These amps also had a chassis built in Chicago, by Chicago Electric, with a cabinet made in Chicago, by Geib. These had performance problems and in 1937, National Dobro went back to using Webster chassis with Geib cabinets.

For his work on Supernatural, Glenn Kolotkin turned to elaborate multi-miking as a way of managing Carlos Santana's complicated setup. "I used multiple microphones on Carlos' guitars: Electrovoice RE20s close, Neumann U47s further away, an SM56, U87s. He was playing through an assortment of amplifiers at the same time, and by using multiple microphones I was able to get just the right blend."
In Hamburg in 1960, Beatles guitarist John Lennon bought a Rickenbacker 325 Capri, which he used throughout the early days of The Beatles. He eventually had the guitar’s natural alder body refinished in black, and made other modifications including the fitting of a Bigsby vibrato tailpiece and regularly changing the control knobs.[7] Lennon played this guitar for The Beatles’ famous 1964 debut on The Ed Sullivan Show (as well as for their third Sullivan appearance, pre-taped the same day but broadcast two weeks later). During Lennon’s post-Beatles years in New York, this guitar was restored to its original natural wood finish and the cracked gold pickguard replaced with a white one.[7]
The DD-5 offers four switchable delay ranges and 11 modes that give access to delays from 1ms all the way up to a walloping 2000ms. Delay time can also be set in real time using the Tap Tempo function and an optional FS-5U footswitch. With the Hold mode you can sample a passage simply by pressing and releasing the pedal. This item has normal signs of use/wear. Has been kept in clean, dry and smoke free environment.
A diagram showing a wiring modification for a Les Paul or a similar electric guitar with two humbuckers. Wiring schemes using four push-pull pots for additional pickup combinations were made popular by Led Zeppelin guitarist Jimmy Page and later produced as a signature model by Gibson. The modification shown in this diagram is an evolution of the original concept combining coil splitting, phase cancellation and parallel/series switching for a total of 22 different pickup combinations.

BAJAAO bring to you the best and extensive range Electro Acoustic Guitars also known as the Acoustic Electric Guitar or Semi Electric guitar in layman terms from all over the world. Versatile in design, the electro acoustic guitar is known for its smooth sound and powerful projection. At its core, an acoustic-electric guitar is acoustic in style fitted with a pickup device allowing it to be plugged into an amplifier, a number of effect pedals or played on its own for a more intimate sound. Heard in basically every genre of music, these guitars are indispensable in almost any modern band setting. In acoustic-electric nylon string guitars, piezoelectric pickups and microphones are used because magnetic pickups are not capable of picking up vibrations of non-magnetic materials. The design is distinct from a semi-acoustic guitar, which is an electric guitar but with the addition of sound chambers within the guitar body. Buy the best Electro Acoustic Guitars online with with the best and affordable price in India. Make your shopping experience a wonderful one with us.
Harry Rosenbloom, founder of the (now-bankrupt) Medley Music of Bryn Mawr, Pennsylvania, was manufacturing handmade guitars under the name "Elger." By 1965 Rosenbloom had decided to stop manufacturing guitars and chose to become the exclusive North American distributor for Ibanez guitars. In September of 1972 Hoshino began a partnership with Elger Guitars to import guitars from Japan. In September of 1981, Elger was renamed "Hoshino U.S.A.", retaining the company headquarters in Bensalem, Pennsylvania as a distribution and quality-control center.
A very good option in the budget pedal market. Comes with a great number of effects to combine for solid sounds. Virtually all the factory pre-sets are worthless and are sort of demonstrations of what the pedal can do. But you have plenty of user saves and setting up good tones is straight forward and simple. The tuner in this and my handheld one never agree. Someone is lying!
Tremolo is the gentle art of making your signal subtly cut in and out of volume. Think of all those old surf records. Phase and flange are quite similar in essence; phase emulates the sweeping of the frequency band, alternating between cutting the bass and treble frequencies, while flange does a similar thing but with a slightly more extreme sound. Wah is perhaps more well known; the Jim Dunlop Cry Baby wah pedal has been used for decades by players of all genres. Adding a highly distinctive wah-wah sound can elevate a solo into something infinitely more interesting. Or it can add a bit of that classic wakka-wakka sound you hear on classic funk records.

A notable line produced by Ibanez is the Artwood series, which has combined old world craftsmanship with modern manufacturing to create some pretty solid entry-level guitars; a great example of which is the AW54CEOPN. While the Ibanez AW54CEOPN is an acoustic-electric guitar, the main focus of its design was its acoustic tone. The guitar utilizes an open pore finish, which is intended to allow the guitar to resonate more freely by minimizing the amount of finish applied to it. It’s hard to say how effective this is in practice due to the guitar’s laminated back in sides, though there doesn’t seem to be any widespread complaints about the guitar’s tone.

While there’s still 9 more guitars to talk about on this list, you really can’t go wrong with stopping here, at the Les Paul Standard. This guitar is one of the most sought-after electrics in its price range. If you’ve ever played a Les Paul Epiphone before, you know what we’re talking about. Besides being a legendary guitar invented by the artist, inventor, and guitarist, Les Paul, this guitar also has what it takes to be legit, such as ProBucker-2™ and ProBucker-3™ pickups with coil-tapping. You can find this guitar for literally one dollar under $500 at most stores. 

CostHelper Electric Guitar Guide - [New Window] - Find out how much an electric guitar should cost. Get price guidelines and shopping tips for an electric guitar. A basic electric guitar with amplifier and cord starts around $200 to $400 for a beginner's outfit; a better quality kit can run $500 to $2,000, and high-end electric guitars are $2,000 to $5,000 or more for the instrument alone.

Pickups convert the mechanical energy of a vibrating string to an electrical signal, allowing it to be amplified, processed and reproduced.[1] Pickups vary greatly in construction, size, types of materials used, as well as various electrical properties, but are generally divided into two categories – single-coil and double-coil (also known as humbucker).[2]

Well, to be more specific, we're talking about Twin Reverbs made between 1965 and 1967. Throughout the decades, these sought-after tone machines have turned up in the rigs of countless guitarists, including Stevie Ray Vaughan—who used a mid-Sixties 85-watt blackface model during his 1985 tour of Japan—Steve Howe, Johnny Marr, Jack White and Dweezil Zappa. The Fender Twin Reverb is considered a standard model for players seeking a clean sound, and it is especially known for the quality of its built-in spring reverb.
The Dolce is a cedar-top, with mahogany back and sides, and the usual set of Savarez Cristal Corum high-tension strings. At 9 lbs and 38” this is a slightly shorter and lighter-weight guitar, which will be more appropriate for a smaller person. This guitar does not come with a gig bag or other accessories, so if you choose this guitar, prepare to make a list of what your instructor of choice says you need.
The Rolls-Royce of multi-effects pedals is the Line 6 POD HD500X. As far as the top 5 pedals in this guide, the HD500X is the most full-featured, most complex, and also the priciest. Despite carrying a higher price tag than the others, it comes very highly recommended and landed a solid second place on our list, and this is mostly due to two things:
Some guitarists and guitar makers avoid this by including an additional resistor, around 4.7kOhms, in series with the capacitor. This provides a minimum level of resistance, so the tone circuit is never at “zero” even when the knob indicates it. You can see in the chart that around 4kOhms (about “1” on the tone pot knob), there’s no hump in the midrange, just a very rapid falloff in the upper mids and treble frequencies.
For every guitarist who’s dreamt of combining the biting twang of a Telecaster® with the sleek, ergonomic contours of a Strat, we created this limited-edition guitar: The Whiteguard Strat. Tele hardware, electronics and playing feel? Check. Ash Strat body with lacquer finish and custom-shaped white pickguard? Check. The unique style and sound you can only get from Fender? You better believe that’s a check.

I'd never heard of this brand but was recently in a store in North Carolina looking for a nylon string guitar. The salesman asked me if I was "open minded" and if I'd be receptive to trying a brand that I probably had never heard of. He handed me a really pretty instrument with a very different looking headstock. I immediately figured he was showing me a very expensive instrument. I asked how much it cost, but he didn't answer. He simply replied "Try it, then let me know what you think." I had no idea how much this guitar would cost, and honestly I hate guessing games, but the guitar was really beautiful. I played several classical guitars there that day. A Yamaha, a Cordoba and an Alvarez, but the Merida was unquestionably the best sounding (and looking).
View a complete range of budget friendly electric guitars over at PMT Online today or call in to your local PMT store to see a full range. We have many electric guitars spanning all budgets, styles and genres including a complete range of guitar starter packs. Alternatively, call 0151 448 2089 to speak to one of our guitar experts to discuss your needs.
Guitar speakers typically exhibit a peak frequency response of between 5 and 6kHz, and sound brightest at the center. Because the top end of the speaker's reproduction is limited, the harsh upper harmonics of amplifier distortion are essentially removed, and what's left sounds pleasing and musical. Open-backed cabinets offer both front and rear miking opportunities for a nice blend, with increased low-end "thump" and "chug" emanating from damped low-string rhythm parts.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1499.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodL20582, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, priceVisibility=1, listPrice=899.0, salePrice=899.0, isOnSale=false, showMSRP=true}

In late 1966, Peter Green had the job of replacing Eric Clapton in John Mayall's Bluesbreakers. Mayall told his producer, "He might not be better [than Clapton] now. But you wait… he's going to be the best." Soon, with the original Fleetwood Mac, he was Britain's most progressive blues guitarist, with a Chicago-informed aggression heightened by the melodic adventure on albums like 1969's Then Play On. Green soon entered a dark age of mental and health problems, returning in the Nineties with more subdued but recognizable gifts.

These guys are the best in town! I had my Gretsch 6120 Upgraded with a new Pickup. They were quick and at a reasonable price. They do amazing work. They also have a great selection of guitars and Amps for sale. I highly recommend stopping by. If your looking for a new guitar for yourself or your kids they will help you find the perfect guitar for your price range. I highly recommend stopping by. They also do amp repair! Stop by and see for yourself.
Search through such iconic pieces of gear as pre-war Martin acoustics, ’50s-era Gibson electrics and ’60s Fender® Super Reverb amps—or perhaps you've always wanted to play an amplifier that your favorite British Invasion or psychedelic garage band used, in which case, you'll have the pleasure of browsing countless vintage amplifiers from Vox, Danelectro, Silvertone and more. Our Vintage Collection also consists of a wide range of MIDI and pro audio equipment, with everything from dynamic and condenser microphones to signal processors and stunning keyboards made by Moog, Univox and Hohner.
My first guitar was an acoustic guitar made by Ibanez. At the time I got it, I was very into the acoustic-oriented bands that were dominating adult rock radio at the time, the mid-90s. You know, bands like Hootie & The Blowfish, Blues Traveler, the Goo Goo Dolls and Barenaked Ladies, for example. So this was perfect for me. I could imitate some of my current favorite acoustic guitarists and learn to play the basic chord structures of their songs. But the itch to do more grew, and I was ready to branch out into the foreign, exotic, sexy world of electric guitars. I bought one of those starter pack guitars that come with an amp, some power cords, a strap, picks, a guitar case, some kind of instructional materials, and everything you needed to transform yourself into Jimi Hendrix in a matter of days or even moments. I was all set.
With its playful old school appeal, many consider the Gretsch G5024E as a fun instrument to practice and perform with. Build quality and aesthetics are often cited in reviews, with many reports of the guitar eliciting positive response from friends and audiences. There are also reports from users who are very happy with both its amplified and acoustic sound.
However, when I’m building a guitar, there’s a myriad of small adjustments I can make to steer the instrument on a desired trajectory. These micro mods are interactive with each other and, depending upon the combination, offer a wide variety of sonic outcomes. But these little mods can also be applied to existing guitars—your guitars—in any number of permutations and to great affect. Let’s take a look at five mods that are easy enough for most players to try.
As a rule, acoustic guitars with laminated spruce tops do not have the same resonance as those made from unlaminated tonewoods, but the Fender FA-100’s fuller dreadnought design provides a richer tone than some customers may expect. If price is a consideration, the Fender has been described as a “cheaply made guitar with a fantastic sound.” What’s more, When you buy a Fender product, you're investing in quality. The Fender Musical Instruments Corporation has been manufacturing instruments and equipment since the 1940s.
Anyone who’s shopped for any kind of guitar recently knows that not only has the number of brands increased, the number of models offered by most major manufacturers has increased. Between Squier (Fender) and Epiphone alone, you’ll find about 20 different models under $200, and that’s not even counting the different color options. When you add newer brands (some of which seem to exist only on Amazon), you could easily end up with more than 50 different models—far too many to run past a testing panel because, as we learned from our ukulele tests, when you have more than about 10 instruments to test, it gets tough to sort them all out.
Most pedalheads consider the Ibanez TS-808 Tube Screamer and, to a slightly lesser extent, the TS9 which followed, to be the grandaddies of overdrive pedals—and, yes, they certainly generate an element of distortion, too. Indeed, more boutique overdrives are based on the late-1970s and early-’80s Tube Screamer template than on any other, but despite the claimed improvements and undeniable quality of many of these, original units still usually fetch far higher prices on the vintage market (ain’t it always the way?) than new units do in the stores. With all of these—and other vaguely similar units—the guts of the sound comes from a clipping amp based around the first section of a dual opamp (purists swear by the JRC4558 chip in the early Ibanez units) and a pair of clipping diodes, with transistorized buffer stages at both the input and output, and a section for tone-shaping and output level control which uses the second part of the dual opamp in conjunction with a network of capacitors and resistors.
Any experienced professional guitarist will tell you there’s usually a big difference between what works on the live stage and what works in the studio. Most discovered early on that the carefully honed live tone they were so proud of just didn’t work on the recorded track, for any of several reasons, or not without a lot of tweaking and readjustment, at least. The first thing you’re likely to discover is that it’s a lot harder to record satisfactory overdriven and distorted guitar sounds than it is to record clean or mildly crunchy sounds, a revelation that often goes hand-in-hand with the fact that big amps tend to be more difficult to record satisfactorily in general.

This is such a trite discussion. There are many more choices than Fender and Gibson, and to boil it down to those two players is detrimental to the industry and by extension musicians of all skill levels. Those companies made great innovations and came out with classic models, and the industry owes them a whole lot. But to me, you get more points for continued innovation, not making a few great models then resting on laurels for the next 100 years.
I kind of think what I do is like producing with my feet because I do a lot of that in my own shows. Particularly when I'm playing guitar with other bands, I'm always changing reverb [settings] and modulation types and the very sorts of things that [maybe no one else realizes what's going on], but it keeps me interested. I think because I come from a time before that was possible, it's a magical thing for me.
Now if this house is rocking, don’t bother knockin. Famous words by Stevie. Many people perhaps know him for Hendrix covers, but where Jimi left off Stevie continued, and continued he did. The elements of Hendrix were alive and plain to see in SRV, but with it, he also mixed in his own influences such as Albert King and his own soul to make it his sound a trademark spot on his songs. I vaguely remember a car commercial where I spotted Stevie’s playing (Pride and Joy) in a Nissan ad. That was much before I really got into Vaughan’s work. SRV was an artist who could play while absolutely stoned face. And when he did sober up, he actually played better. His newfound health and love for life and music are showcased on In Step his last album before his death a year later. Stevie’s footprints will always be in the air and in our hearts.
Fished around here on Amazon and ordered two of these Sky guitars instead. With the shipping and import taxes they still came out costing less than the plastic toy junk. The girls were predictably overwhelmed. What's a 5- or 7-yo going to do with something like this? These are in fact real electric guitars. They are substantially constructed and while they may not have the level fittings you'd see on a professional's expensive Fender or Gibson, they work well. The little amplifier is not strong and distorts at high volume but it too works well at modest volume levels. Although it is not included, there is provision for connecting a 9v AC adapter which you'll want to get as even this somewhat weak amp will go through a 9v battery pretty quickly.
Vox's history goes back to the late '40s, where they originally built electronic keyboards. Their presence in the guitar market started in the late '50s when they launched the 15-Watt AC15 amplifier which ultimately caught the attention of many iconic artists - including The Beatles, Queen, Dire Straits, The Yardbirds, The Rolling Stones, The Kinks and many more. These artists helped spread the brand's popularity around the world, but ironically, they were not enough to make the company profitable. This resulted in the Vox brand being owned by many different companies, thankfully Korg took over in 1990 and continues to take good care of the brand up to this day. These days, Vox is still the go-to amp for chimey and jangly clean tones with an extensive line up of amplifiers, interestingly, their line up still includes modern reproductions of their popular AC15 and AC30 combos.

Thanks for this explanation. I have built a few electric guitars, but they have been in the Gibson style with two humbuckers. I am now working on a guitar with an HSH configuration, so for starters, I needed to understand the basic 5 way switch, which if you just looked at it, it makes no sense. Now I see that the wipers of each pole are on the opposite end of each side.

The “best” here is subjective. Again, what is best for me may not be best for me might not be best for you and vice versa. In general here are my recommendations for buying a guitar from the best brand of electric guitars for beginners at every level. There are several brands available in the market that claim to offer the best quality electric guitars for the beginners and for the seasoned guitarists as well. But some of them are really up to the mark if you are looking for the best guitar, you can go with them certainly. 
Cool guitar! You really don’t see many of these anymore. You are correct that it’s similar to the Washburn Wing series, specifically the Washburn Eagle from the late ’70s and early ’80s. In fact, aside from different fretboard inlays and brand names on the headstocks, when you compare the two they’re nearly identical. If this connection seems odd, the occurrence of very similar guitars with different brand names is more common that many of us would think.
Bought a Tubemeister 18 Twelve about three years ago. Love the size, and options of this amp. Primarily use it at home. Replaced a Fender and a Marshall combo amps with this one. Really like the sound, but recently blew a power tube as well as a fuse, and capacitor as a result. Replaced the Chinese power tubes with JJ's, when professionally repaired. All seems well, but wonder about the reliability of this amp in the long run. My tech recommended changing the tubes every year or two, especially if using the power soak feature. Running it really hard by doing so. Also, read that it generates more heat inside the cab (no vents. closed back). Overall still like the amp, but after dropping $200 to repair, after spending $800 on the amp.. having second thoughts of long term reliability. Not using the power soak very much any longer, and keeping a better eye on the TSC (tube safety control)... not sure if it actually did what it is suppose to. To me... less features and simplicity could be ...more
Little-known manufacturer from Osaka, Japan, this company is responsible for the oddly named John Bennet badge. Nakai has been mentioned as a possible Matusmoto Musical Instruments Association member in the past. The company still exists and is producing musical instruments, quite a feat in light of so many manufacturers who faded after the golden electric guitar age.
American guitar manufacture was at its peak in the 1960s, with numerous highly-respected guitar companies making instruments at all levels; from the likes of Kay, Gretsch, Epiphone, Guild, Fender and Gibson. But Harmony was one of the very biggest producers, at one point the biggest, selling guitars branded both as Harmony, and rebadged for numerous other distributors. In fact, in the mid/late 1960s, Harmony was said to produce more guitars than all other American guitar manufacturers combined. Most were entry or intermediate level instruments though, and although examples of most models are easy to find, examples in really good condition are rare.
Yamaha is well known for the quality of their mass produced and affordable guitars, and they continue to be the brand of choice for students and even for teachers. The Yamaha FGX800C is tasked to represent brand in the sub $300 price range, and judging from reviews, it is doing very well in the market. Everything about this guitar is conventional, from its familiar dreadnought cut-away shape to its comfortable neck and string action. It also comes with built-in electronics that give you 3-band EQ control and a tuner. But what makes this guitar a bit more special is the use of solid spruce with scalloped bracing for the top, which ups the value of the instrument.
Even though pickups are the main component tasked with interpreting string vibrations and indirectly turning them into sound, your choice of wood still matters. Although the effect is subtle, certain woods will give you better sustain, more definition, and so on.  And in the end it's the accumulation of all of these choices that determine your ultimate sound.

Russell is not only one of the hardest working technicians in Dallas but also a classically trained guitarist with a degree in classical guitar performance from SMU. To supplement his income playing classical guitar, he joined the Brook Mays team before finding a home at Charley's Guitar Shop. "Having a background as a player helps with cutting through the issue," he says. "I think the real part of guitar repair is being able to observe what's going on with the guitar but also understanding what the player is going through."
Stripped holes: small holes without much tension on them (i.e. pickguard screws) can be repaired with super glue (gel stuff). Put some glue in the hole and screw the screw in about 1/2 way. The glue will not stick to the plated screw, and will form threads. More severely stripped holes or holes w/ more tension on them (i.e. strap button screws) require pieces of toothpick be glued in w/ wood glue. Larger holes w/ alot of tension (i.e. neck mounting screws) require the hole be drilled out and a hardwood dowel glued in place.
I haven't had the pleasure of owning an Andrew White yet, but I plan to. I've followed the company and Andrew for some time after noticing repeated YouTube videos featuring unique guitars with lush, exotic tones. Since then, every time I've had a question or comment it is Andrew himself that responds quickly with pleasant and enthusiastic answers. Andrew White guitars have something different to offer and Andrew himself seems to be a down to earth guy with the passion of guitar building in his heart.
This is an absolutely stunning OM acoustic in MINT/As New Condition. This has been in my personal collection for a few years. In the words of Bill Kraus, the builder: An OM model in my favorite combination of woods: Red spruce top, Honduran rosewood back and sides, curly Koa bindings. I first heard about Bill Kraus from my good friend, Scott Freilich of Top Shelf Music in Buffalo, NY. Scott has been a factory authorized Martin repair center since 1979 and has seen the finest 6 figure pre-war Martins. Scott was raving about Bill Kraus, his knowledge of tonewoods, and the insane quality of his guitars. I also learned that Stan Jay of Mandolin Bros. was equally impressed with Kraus Guitars and had started carrying Bill’s guitars in his store. Every Kraus guitar at Mandolin Bros. has sold!
Much like any other job or hobby, building guitar pedals requires specific tools in order to get the job done. Furthermore, before you start putting together your first build, it is vital that you have a significant understanding of how to solder circuit board electronics – otherwise you may find yourself at a loss due to faulty soldering (believe me, this is not a fun issue to troubleshoot).  If you need to practice soldering, here is a helpful video.
The HX removes the amp modelling and condenses the rock-solid build, intuitive user interface and neat form-factor of the Helix series into a svelte multi-effects box that will fit on a Pedaltrain JR with room to spare. As on the larger units, editing is highly intuitive. Lightly touching a footswitch opens the edit menu for that patch, with the large rotary and left-right buttons used to switch patch and parameters. More complex functionality like editing signal flow isn’t far away from the user - a couple of clicks through the menu gets you there, and makes creating banks of your own a breeze. In terms of sounds, the same high-quality effects from the flagship units are present and correct, with a number of additional effects that have been developed in the meantime. The drives on offer are excellent, and into a small tube amp we also found the boosts allowed us to drive the amp into saturation, or up the ante for soloing. With a real drive in front, the unit was able to keep up, and the interaction between external drive, HX and amp was close to indistinguishable from stacking two real drive pedals.
My 10 year old was getting bored with his previous instructor's teaching methods and had been begging us to drop guitar lessons. We thought we would try a different instructor. We've had only one meeting, but I saw a light reappear in my son's eyes and he is excited to start lessons with Jon. The video lessons and use of newer computer technology and has my son excited and motivated to keep learning to play.
Whether you have your sights set on a dreadnought acoustic or a classic Squire Strat, the guitar value packages found here consist of everything a player needs to make their guitar learning experience an exciting and enjoyable one. From Fender, Dean and Alfred to Jasmine, Ibanez and Martin, all the big names are here. You'll have no problem finding the perfect guitar value package that pertains to your specific music tastes.
Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.
American guitar manufacture was at its peak in the 1960s, with numerous highly-respected guitar companies making instruments at all levels; from the likes of Kay, Gretsch, Epiphone, Guild, Fender and Gibson. But Harmony was one of the very biggest producers, at one point the biggest, selling guitars branded both as Harmony, and rebadged for numerous other distributors. In fact, in the mid/late 1960s, Harmony was said to produce more guitars than all other American guitar manufacturers combined. Most were entry or intermediate level instruments though, and although examples of most models are easy to find, examples in really good condition are rare.
Launch price: $499 / £445 | Body: Chambered basswood body with arched-maple top | Neck: Maple | Scale: 24.6" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Black Top humbuckers | Controls: Neck volume, bridge volume, tone, master volume, 3-way pickup selector | Hardware: Anchored Adjusto-Matic bridge | Left-handed: No | Finish: Gold, Silver Sparkle, Black
POLISHING Once you have completed the wet sanding you wil have a pretty smooth surface that is almost a dull shine. You can either hand polish the finish or use a polising attachment to buff it out. Stew Mac has a polishing pad that attaches to you drill. Or you can get 6" foam bonnets from an auto parts store that will fit over the sanding disk attachment you may already have. It is best not to use any thing made from cotton because it will cut through the finish. Stew Mac also has polishing compounds that you will use in order working you way down to the swirl remover. It's on the expensive side so I use McGuires polish that you can get from the auto shop. If you use a buffing attachment make sure that you uae a different attachment for each grade of polish. Don't use the same pad for each one. Also remember to wait 10 minutes after buffing before you wipe off the surface. The lacquer gets hot and soft after buffing so give it time to cool. You will have to hand polish the cutaways, don't attempt to use the buffer on the edges of the guitar or cutaways because you will burn though the finish.
Correct bridge placement determines a guitar's intonation when playing fretted notes. The distance between the guitar nut and bridge is the scale length. Placing the bridge too close to the neck shortens scale length and makes fretted notes sharp. Moving the bridge too far from the neck increases scale length and creates flat fretted notes. No amount of tuning helps a guitar with a poorly positioned bridge. Any fretted note falls high or low of the desired pitch.
11. Yamaha THR10 ($299): Another compact yet mighty combo amp, the THR10 boasts a mid-century-modern design with a variety of onboard effects and amp emulation options. This amp uses Virtual Circuitry Modeling (TCM) technology, which creates realistic and pristine tone. When plugging in your bass or acoustic guitars, you can even bypass the modeling section. One of the most convenient functions is the ability for the amp to run on a supplied AC adaptor or battery power for ultimate portability in your individual practice scenario. And it even includes Steinberg’s Cubase AI recording software so it’s plug-and-play right out the box!

Dude everything your saying about Martin is basically true of Taylor. They are the two big brand names. Taylor is to acoustic guitars what Tagheur is to Swiss watches. The low end of an expensive world where thhe best stuff comes from tiny companies who don't advertise much or pay for all he shelf space at a place like guitar center. I'm not saying Taylor's aren't good-that would be ridiculous. I'm just saying your distinction between Taylor and Martin is laughable. They are both well known companies that can charge way more because of their names just like fender and Gibson can with electrics. For the same money think you get better sounding and lasting guitars from Takamine and Breedlove than Taylor and Martin just to name a few. But there are so many smaller luthiers that will make incredible stuff.
Let's now look at two real-life examples of what this would look like with a realistic setup. Our first example will be a linear sequence without an effects loop, while the second will use an amplifier effects loop. It should be noted that many pedals themselves can host their own effects loop, so how you set it up is up to you. It functions the same either way.

ok thank you so much! Unfortunately, it’s not as loud as the other single coils of my strat. I tried splitting to the other coil but doesn’t split. I followed the wiring diagram bit by bit. =( Thank you so much for responding right away. I’m a session musician here in our country and this is actually my first time to mod my guitar. Thank you so much!
I have been playing guitar, banjo, bass and harmonica for 46 years - and I don't find a $4,300 Martin D 41 to be affordable (Guitar Center price). I play a Taylor 402ce and a dozen other instruments. I believe Taylor is the best instrument for the price..Alvarez Yairi guitars are very good too. Martin and Gibson make fine guitars but they are overpriced. I have a Chinese Maple Guild that sounds fine but the fretwork is amateurish. A Chinese Takamine New Yorker is very well constructed and sounds great.
Many pedalboards on the market are powered. They feed DC power directly from the board to your pedals, eliminating the need for battery changes or external power adapters. This simplifies your setup and minimizes your need for power outlets. Some pedalboards even have a small built-in combo amplifier, making them a great practice and jamming solution.
Other than the old cranked amp or faulty preamp channel, these are the grandaddies of distortion devices. Fuzzes were also among the first of the transistorized guitar effects being built back in the early 1960s—which is no surprise when you discover the simplicity of most of them. It’s almost pointless to describe the sound of a vintage-style fuzz tone more than the name already does. They slather a slightly wooly, rounded, warm but sparkly distortion all over the guitar signal (see, you could just say “fuzzy”) to give more meat, girth, and sustain to the sound. More imposing units can be guilty of taking charge of the entire signal and bending it to their own synthetic demands—“brick-wall processing,” as Hendrix-approved effects builder Roger Mayer puts it himself (meaning your signal hits that wall and cannot pass through without a total transformation of its nature and character)—while those which many consider to be the more playable devices retain elements of your dynamics, touch, feel, and core tonality. In the case of “brick wall” type fuzzes, the resultant sound is still, usually, more processed and artificial than any of the preceding types of pedals in this category. The more dynamic fuzz pedals, however, are great for working with you and preserving the critical elements of your touch and tone. Turn a tube amp up to where it’s starting to break up and you’ve got gentle overdrive; crank it to the max and you’ve got heavy distortion. Pull out one of the pair of output tubes, use the wrong-value bias resistor on a preamp tube, or beat it senseless with a crowbar and you might just get it to sound like fuzz. It’s not a natural sound, but it can be a great one, and it’s a major part of many players’ signature tones.
Maple is the most common wood used to make guitar necks. It is very hard and dense, and often has attractively detailed grain patterns referred to as figuring. Maple also has a very bright overall tone. Due to it’s figuring and its tonal characteristics maple is often used for a veneer or top laminate on more expensive solid body guitars. It is also used as a top wood in some archtop guitars, where it is usually laminated. Its hardness brings out the trebles in a guitar's sound. It is also often used for the fretboard where it adds definition to the sound. 
This is our new cross-reference between classic pedals (e.g. a Fuzz Face) and who makes kits or boards to build it yourself. In some cases the kit or board is for an exact clone. In others, it is for a circuit based on the original but with improvements or combinations with other pedal designs. Read the description specifics by clicking the link and visiting the maker’s site.
Also apparently still in the line in early ’64 was the SD-4L, which had adopted four of the two-tone, metal-covered pickups found on the SS-4L guitar. This still had the old, elongated Strat head. It also had the platform vibrato system found on the previous SS guitars. The SD-4L probably didn’t make it into ’65, but the shape was taken over by the more conventional TG-64.
This specific review is for the full-size guitar, which is 40”, so if you read all the reviews on Amazon, many of them are for the ½ and ¾ size. If you’re an adult with smaller hands, purchasing the smaller sizes may be a better bet than trying to wrestle with a full-size instrument. Size doesn’t necessarily have to do with this guitar model’s tone, which many reviewers say is quite good for the price.
Paint chips and cracked binding: Common on older instruments. Over time these openings will collect sweat, polish, and dirt, causing discoloration, lifting of the edges, and further deterioration. It is best to clean these spots w/ naptha (lighter fluid)or alchohol, remove any loose edges around the chips before cleaning (they will be holding polish and grime preventing the glue from working), then seal the chips and cracks with thin superglue. Super glue can be heated in the microwave for a few seconds (plastic bottles) to make it flow better. Drop Filling is a technique for filling chips with paint. This is covered at the ReRanch site.
Gibson guitars do tend to run on the high end of the price spectrum, but for an experienced player it’s not hard to understand why. Their guitars offer top notch craftsmanship and tone that is favored by a large segment of players. However, this does make their line of guitars less practical for beginners, who will likely want to improve in skill before making that level of investment.
What can we learn from these restaurant guests? The lesson is that we are very easily tricked into liking things we pay more for, even though they might not be that good after all. We get a particular feeling from thinking that we’re treating ourselves to something luxurious. If we, on the other hand, haven’t spent very much, we usually assume that it can’t be a good product.
Ovation guitars are produced in the U.S. as well as in Korea and China. Those models in general have a wooden top. Recently Ovation significantly reduced the production of U.S. made Ovation models. From 2010 on better models (e.g., Legend, Elite, Custom Legend, Custom Elite) used to be available, both, made in the U.S. and made in Korea. Before that, the mentioned models were U.S. made. In recent years many U.S. made guitars could be identified by the LX in the product name (e.g., Legend 2077LX), whereas the Korean-made version of the same guitar had AX in its model name (e.g., Legend 2077AX). Again, this name-system has not been used throughout the whole guitar model range (e.g., Ovation 1617ALE). Nowadays only a few U.S. made models are being produced, mostly signature and limited edition models (e.g., Custom Legend 1769-ADII Al DiMeola). Production of the standard model range of Ovation guitars in the U.S. has been seized.[24]
Simon Stockhausen began his stellar musical career at the age of five. His multi-faceted and wide-ranging oeuvre has since embraced all manner of projects and styles, including jazz and improvisational collaborations, countless compositions for ensembles and chamber groups as well as work for major European theatre companies and orchestras including the Hamburg and Berlin Philharmonic Orchestras. In 2009 he further extended the range of his musical endeavors with the creation of a sound design company through which he produces sounds, patches and libraries for software synths and plug-ins, serving sound designers, musicians and post production professionals.

Specs for combos were as follows: Checkmate 10 (6 watts, 6″ speaker, two inputs, striped grillcloth); Checkmate 12 (9 watts, 8″ speaker, three inputs); Checkmate 14 (14 watts, 8″ speaker, three inputs, tremolo); Checkmate 17 (20 watts, 10″ speaker, tremolo, reverb); Checkmate 16 bass amp (20 watts, 10″ speaker, volume, tone); Checkmate 17 (20 watts, 10″ speaker, reverb, tremolo); Checkmate 18 (30 watts, two 10″ speakers, reverb, tremolo); and Checkmate 20 (40 watts, 12″ speaker, reverb, tremolo). Piggyback amps included the Checkmate 25 (50 watts, 15″ speaker, reverb, tremolo); Checkmate 50 (two-channels, 100 watts, two 15″ speakers, reverb, tremolo, “E tuner”); Checkmate 100C (two channels, voice input, 200 watts, two 15″ speakers, reverb, tremolo); and the big hugger-mugger Checkmate Infinite (200 watts, two 15″ speakers, stereo/mono preamp section, reverb, tremolo and a bunch of other switches). The one shown in the catalog actually has a block Teisco logo and carried the Japanese-marketed name – King – in the lower corner.
Believe it or not, Eddie Van Halen hadn’t even heard rock music until he and his family moved from the Netherlands to Pasadena California in 1967. After hearing Cream, he quickly abandoned piano and drums for the guitar, learning the instrument by picking licks off records by Eric Clapton, Led Zeppelin, Jimi Hendrix and Jeff Beck. These influences were merely a springboard, though. Eddie was quickly able to put his own mark on everything he played.
The strings on your electric guitar have a major impact on its sound and playability. If you’ve taken a look at the huge Musician’s Friend guitar string assortment, you’ve likely realized that there’s a lot to consider in figuring out which strings are right for you and your instrument. Keep reading to find the strings that best match your electric guitar, music, and playing style.
There are of course, other buttons and positions featured on guitars. BB king’s Lucille had a switch to toggle different values for R11 (thus going from moody chords to punchy ‘Lead’ with a finger and no need for extra gear). Advanced guitars may have phase and antiphase switches for humbuckers or dual pickups. The jackson 5 Telecaster I think is an example as it has both a phase and anti-phase wiring on their pickup selector.
As mentioned above, the Martin DSR2 comes with an all-solid wood body, with traditional solid spruce as its top. In conjunction with the solid sapele back and sides, this configuration produces premium level Martin dreadnought tones, albeit with stripped down aesthetics. The neck is as familiar as it gets, with its 1.75" nut width and 25.4" scale length.
I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.
{savingPercent=0.00, isPreOrder=false, pimStatus=R1, visibilitySalePrice=9.99, typeCondition=New, statusText=In stock, isPriceDrop=false, displaySku=451058000001000, invMsgBackOrdered=false, skuPriceVisibility=1, stickerUrlLink=null, kitCarouselSkuIds=1500000222576,1363016749098,1368456537505,1300744185161,1377190992159,1500000250930,1368456537510,1363811587202,1500000222578,1500000154196, stickerURL=null, availableDate=Wed Feb 27 04:20:22 PST 2019, invMsgAvailability=, serialized=false, listPrice=9.99, isShipsInternational=true, name=Black, invMsgBuyToDemand=false, partNumber=SSG-303 BK-MG, MSRP=24.99, inventoryStatus=1000, newPrice=9.99, condition=New, status=instock, stickerClass=null, stickerText=Top Seller, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, MSRPRange=false, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, prop65=WARNING: This product can expose you to chemicals including Vinyl chloride, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to cause birth defects or other reproductive harm. For more information go to, salePrice=9.99, warranty=false, displayId=1274228076940, stickerDesc=Top Seller, isOnSale=false} 9.99 USD
According to Harmony’s 1963 price list, the H1213 Archtone sold for $37.75. If we take inflation into account, this same guitar would actually sell for around $270 today. This is roughly the same price for most entry-level acoustic guitars these days, but the two main differences are that the H1213 is an archtop and it was made in the US (most modern entry-level acoustics are flattops produced in Asia).
If you decide to choose a guitar, amplifier and accessories separately, consider spending more on the guitar than the amplifier. A better guitar will often suit a player’s needs longer, and a less expensive amp will be fine for early practicing sessions. If the player decides to upgrade down the road, often they may only need to upgrade the amplifier and not their entire setup.

In 2010, Gibson USA released the Slash “Appetite” Les Paul Standard as a tribute to Guns N’ Roses‘ debut album, Appetite for Destruction. It resembles the original Les Paul Standards of the late 1950s, including the 1959 Les Paul replica Slash used for the recording of the album. It has a maple top with a nitrocellulose Sunburst finish, rosewood fingerboard with acrylic inlay, and a Slash headstock graphic. It also features Slash’s signature Seymour Duncan pickups.[40] The Gibson Custom Shop introduced the Slash “Appetite” Les Paul Standard. Production was limited to 400, with 100 guitars hand-aged and signed by Slash himself, and another 300 finished with the Custom Shop’s VOS process.[41] Epiphone issued a more affordable version of the “Appetite” Les Paul, production of which was limited to 3,000.[42][43]
The model designations of the archtops are unknown. Later these guitars would have either a PE or EP model designation, so presumably the ones in the photo did, too. One appears to be a full-sized, thick-bodied archtop with a rounded cutaway. Not much is visible in the photo, but it apparently had a single, white-covered pickup at the neck, block inlays and a white pickguard. The other guitar had a single pointed Florentine cutaway and was slightly smaller than, say, a Gibson ES-335. It’s impossible to tell the depth from the photo, but it looks as though it’s a thinline. This, too, had a single white pickup at the neck, moveable adjustable bridge, trapeze tail, large white pickguard (not modelled on a typical Gibson shape, by the way), a little plastic plate on the lower bout with volume and tone, with white knobs. The fingerboard has large white dots, with double small dots at the octave. The f-holes are three-part; the headstock Teisco three-and-three.
Frets & Necks did an AMAZING job on my RG7421. They installed my BKP Black Hawk p/u's and new tone/volume pots. Frets & Necks service was above and beyond, fast and super knowledgeable. I am very pick...y about who works on my guitars, I am beyond pleased that I chose Frets& Necks to work on my RG. I will be bringing my RG7421 back to Frets & Necks for future upgrades very soon. Be good to yourself and treat your guitar, give Frets & Necks a try. You won't be disappointed. Thank you F&N. See More
The D-18E was a mahogany dreadnought with the neck pickup and a second bridge pickup. The typical Martin pickguard had the front point cut off and a notch in back to make room for the pickups rings. A three-way toggle was mounted on the upper treble bout. Controls included one volume and two tones, with the big plastic knobs. D-18Es are the rarest of these early Martin electrics, lasting only from the ’58 prototypes through 1959. These began with prototype #163746. Around 858 of these were produced.

Tablature, or Tab, is a very important tool that allows guitar players to easily learn how to play chords, melodies, and songs. Learning how to read guitar Tab can be a mystery for some newer guitar players. In this guitar lesson, we are going to learn how to read guitar Tabs and go over some of the more common elements you will see when you pull up a Tab for a song you want to learn. Try this lesson if you want to learn how to read guitar sheet music.
In terms of the Teisco brand, the moving force was Jack Westheimer and his W.M.I. company in Chicago. According to published accounts, Westheimer began importing Teisco-made Kingstons in around 1961, although these were not promoted in the trade press until the beginning of ’64. It was this connection that would make Teisco the dominant powerhouse it was to become.
Based on SGM-v2.01 ( with improved quality aoustic guitars (21mb) and basses (50mb) and also designed to run on apps such as Sweet Midi Player. This is a great GM SoundFont and the one I use on iPad/iPhone and PC.  You can comfortably run this GM Soundfont in Sweet Midi Player app on most iOS devices. For Windows PC you can install a new GM soundfont using the free program Coolsoft VirtualMIDISynth.
List of electric guitar brands that include the most reliable models available. Electric guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best electric guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

Getting your guitar action set up by a good luthier can make a huge difference to any guitar's playability (you'll usually find someone at your local store who can do it). I have a number of private students that found an AMAZING difference when they had set their guitar up properly, and of course, get all mine done too. If you are struggling to play barre chords (particularly the dreaded F chord) on an acoustic guitar, then a too-high action could certainly be a part of the problem.
Myths and Legends: Valve technology is intrinsically the most elegant means by which a speaker is able to reproduce music. This is not because valves have magical qualities but because the technology by which they function is not achievable by other means. In ten thousand years from now Valve amplifiers will possible be the only remaining technology from the 20th century that will be still be being used and loved with as much passion as when first invented. As much as there is no proof that Valve amplifiers can sound superior to solid state I for one if given the choice will only listen to music through Valve amplification.
Our flagship guitar. Customers have been asking Denny to build this instrument for such a long time that he finally gave in and designed what many are calling the best acoustic on the market today.  We’ve had players put this guitar up against the best from Taylor, Martin, Gibson, Fender, Santa Cruz, Bourgeois, and we never get them back, even with our 100% money back guarantee. If you’re looking for your last guitar you can pass onto your children this is our #1 guitar. We’re sold out and back ordered on them most of the year so when you see one grab it as Denny builds only a few annually.
Chorus pedals actually make your guitar sound like there are a variety of different guitarists playing the same thing that you are playing, but with a different guitar and slightly out of time with you. This effect makes everything you play sound a little bit ‘warbly’ and thickens up your guitar or bass lines. We recommend experimenting with these as you can use them subtly to add weight to your sound or as a full-blown effect that completely takes over your signal.
Buddy Holly was one of the pioneers of the Stratocaster and used the instrument on virtually all of his songs with the Crickets. During the recording of “Peggy Sue”, rhythm guitarist Niki Sullivan was not needed for the song, and instead stood next to Holly, and flipped the selector switch of Holly’s guitar from the neck pickup to the bridge pickup for the guitar solo.
Vintage Guitars has been around since 1985. We know what professional guitar players want. Our authentic guitars combine the classic design of vintage guitars with the modern playability of newer ones. The retro look is combined with patented new hardware that gives you the best of both new and old worlds. Whether your preferred genre is rock, country or jazz, we have vintage guitars for every working professional musician. If you’re looking for great features and old-school style, you’ve come to the right place. Check out all of our electric, acoustic and bass guitars!
The Fender CC-60SCE acoustic-electric guitar combines the powerful onboard electronics with classic Fender tone and the comfort of their longstanding craftsmanship. The smaller concert body features a solid spruce top, mahogany back and sides, and "Easy-To-Play" neck, making it a perfect choice for beginning to intermediate level players looking to take the next step in their music. 
The first guitarist to chain effect pedals together, Hendrix combined their tones and textures with whammy bar squeals and growls and unorthodox playing techniques to make the guitar sound like a symphony, animals, armies or the far reaches of outer space. While most Sixties psychedelic music was banal bubblegum pop with fuzz-tone guitar hooks, Hendrix made music that actually sounded like a trip after ingesting a cocktail of LSD, mushrooms and THC.