Whether you are a beginner or the pro guitarist, choosing the right guitar brand is always essential. We are sure you will find your desired electric guitar from the range of best electric guitar brands we review above. If you want something different or best acoustic guitar brands, do share with us your thoughts in the comments below. Maybe we missed out something that you would remind us.

Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All of our kits have a build difficulty rating to help you determine which kit is right for you.
A DPDT (2PDT or 2P2T) on/on switch has two channels (poles), each having three lugs. This is like having two SPDT switches in one. It’s the standard configuration for most push/ pull or push/push pots, and you can use it for almost all mods, including the seven-sound mod (if you leave one pole unconnected), coil-splitting a humbucker, out-of-phase mods (by adding some jumper wires from pole 1 to pole 2), a direct-through mod, and countless others. Let’s see what’s going on here.
This fully analog simple plug and play guitar amplifier is enjoyable to play with. It has a switchable clean and dirty channel with separate volume knobs that shares a 3-band EQ treble-mid-bass and gain control to add more grit so players can arrive on a crunch and lead sounds. Other useful attributes on the amp are set of input jacks for a headphone and audio source to play along with a backing track.
Probably also new in ’39, though it could have been available as early as ’38, was the Supro No. 50 amplifier. This was a typical Supro rectangular cabinet, now with a round grillcloth broken by two horizontal strips of wood. A Supro logo plate sat on the upper left corner. It had a flat leather handle and five tubes putting out 12 watts through a 10″ speaker. There were two inputs, an on/off switch and volume control. Cost was $50.
In fact, guitarists are on a whole different planet when it comes to defining cool. When you play guitar, you can get away with all kinds of acts normal people could never attempt. Face it: An ordinary dude could not walk down the street wearing a leopard-skin jacket, high-heel cowboy boots, flowing silk scarves and dozens of silver bangles without getting beaten up within minutes.
3) Sound when not plugged in is surprisingly good for a little guitar. Of course, if you're expecting acoustic sound like a jumbo or parlor you will be disappointed because that's impossible for a 3/4 size guitar to match the acoustic sound of larger guitars. However, for a 3/4 size guitar in this price range, it's as good as it gets and I will put this little guitar up against any 3/4 for acoustic sound in this price range.

Electric basses tend to use a medium jumbo fret as most Fenders have thru the years.  There are some folks who like the medium or even the very narrow/small mandolin fretwire for basses – this is more of a vintage feel, like the earliest Fender basses (Fender created the Precision Bass in 1951).  Since string height for bass strings is higher due to gauge and tuning, they are easy to grip and many bassists do not seem as concerned about fret height as guitarists.

The Ibanez Artcore AF75, PRS SE Standard 24 and Schecter PT, for example, are priced below $600 and have been highly rated. They’re not exactly cheap money-wise, but they’re definitely worth a lot more. Getting one of those from the get-go will make playing guitar a lifetime passion. “Cheap” guitars may seem more affordable at first, but many of these are poorly made and can be more costly in the long run because of constant repairs and replacements.

With this new edition, they scrapped the DVD from the previous version, and introduced online video and audio clips, as a supplement to the book's teachings. They didn't take it overboard though, with just 85 videos and 95 audio tracks, but at least it's a step in the right direction. You can't learn music by just reading about it, you need audible tools.
Fender Pro Series Stratocaster and Telecaster Case   New from$119.99In Stockor 4 payments of $30 FREE 2-DAY SHIPPING Epiphone E519 Hardshell Case for 335-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Epiphone Hardshell Case for Les Paul-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Fender Deluxe Molded Case for Stratocaster or Telecaster   New from$149.99In Stockor 4 payments of $37.50 FREE 2-DAY SHIPPING See All Electric Guitar Cases
Here’s an interesting (they’re all interesting to me!!!) guitar that shows the evolution of Matsumoku made guitars.  Even the earliest solid body electrics that came out of the Matsumoku plant were made of solid wood and displayed really good wood craftsmanship!  Lots of start up companies went to Matsumoku in the early days because the plant had proper wood drying facilities (if the wood wasn’t dried properly, the guitars often became seriously messed up during the import trip across the ocean).
Hum cancelling: hum cancellation is caused by reverse polarity, reverse winding keeps a revrse polarity pickup in phase with a non reverse polarity pickup. To reverse the direction of the winding, simply swap wires, using hot as the ground and ground as the hot. Polarity can be changed on many pickups. If the pickup has bar magnets, simply flip them over. If the pickup uses alnico polepiece AND has the new plastic bobbins such as is common on Fenders, the polepieces can be pushed out with a screwdriver and reinserted "upside down". If the bobbin is fiber DO NOT attempt to flip the polepieces; the wire is wrapped directly around the polepieces and will almost certainly be damaged.
We have covered pickups here before so rather than running over old ground I suggest you read that article to get an understanding of the different types of pickups an electric guitar uses and how they work in greater detail. For the purpose of this article, however, all sound starts with your pickups. Pickups are essentially magnets, generally 6 small magnets wrapped in a very fine copper wire (over 7000 times), and can be better described as magnetic wire coils.
The FX8 lets you configure up to eight effects per preset, from a list of impressive effects that are modeled from classic to modern stompboxes. It also offers a more traditional work flow via Fractal Audio's "Scenes" mode, which lets you assign effects to footswitches, turning the unit into a virtual stompbox pedalboard. And since it utilizes the same algorithm as their premium processors, you can be sure that each effect model has the same sound quality. Fractal Audio is also known for their boutique like attention to detail and build quality, which is prevalent in the FX8's design. Most notably its footswitches which are designed to have no-mechanical contacts, meaning no noise and improved reliability.

Kay was best known for its mid-priced guitars, (i.e., quality guitars priced below top-of-the-line instruments like Gibson and Gretsch models) as well as its budget instruments. Kay made guitar models for its own brand name and guitars branded as Silvertone for Sears, Sherwood and Airline for Montgomery Wards, Old Kraftsman for Spiegel, Custom Kraft for St. Louis Music,[2] Truetone for Western Auto,[3] 'Penncrest' for JC Penney, etc.[16] Also, Kay produced a line of archtop acoustics called Kamico.

One of the most appreciated brands on the market at the current time, the Epiphone by Gibson surely won’t let you down. The company was founded 144 years ago by Anastasios Stathopoulos and is still running today. This brand is known for producing top-notch guitars that many players love and recommend, the reason why its popularity increased over the years.

It should be noted that some bridge assemblies have pre-set, non-adjustable saddle pieces. The Gibson "tune-o-matic" bridge is just one example. On these bridges you will have an overall height adjustment post on either side of the bridge. For these bridges, measure the height at the 12th fret for the low and high "E" strings and make your height adjustment for each side at the respective post. The other string heights will be defined by the bridge assembly.

Fender’s legendary tone is enough to win just about anyone over, and they cater to a wide range of customers by offering the more cost friendly Squier series. While their classic electric guitars are favored by plenty of players, their acoustic selection and Jazzmaster offerings have their fair share of supporters as well. No matter what you’re looking for in a guitar or what price range you’re shopping in, you’re likely to find a good fit with Fender.
As of 2012 Taylor Guitars has more than 700 employees. The company maintains two factories: One in El Cajon, California and the other, 40 miles away in Tecate, Mexico where the entry-level guitars of the Taylor line (the Baby, Big Baby, GS mini, and 100-200 series) are made along with the Taylor guitar cases. In early 2011, the company opened a distribution warehouse in the Netherlands. Also that same year, the company, along with Madinter Trade, S.L., partnered to purchase the Crelicam ebony mill in Cameroon. [6]

Hopefully, this guide has given you all the info you need in order to go out there and find the perfect guitar for yourself. We went into some aspects of electric guitars that will shape your decision the most. Beyond the ultimate considerations discussed between "this or that," the rest is a matter of preference that only develops after you've had time to gain that much experience. Until then, we hope you score the best electric guitar you can from above, as they'll carry you the distance until you've traversed the path long enough to start getting peculiar and picky.  Happy shredding!

For the acoustic guitar player, plugging in to an external amp and effects processor can be quite fun, and can add a lot of 'spice' to your playing, just by virtue of having access to a wider range of sounds. But whereas hauling an acoustic guitar with you isn't a big deal, hauling an amp and accessories with you (and finding a place to plug in) can be challenging.

ESP Guitars are among the very best guitar brands on the planet. The firm was set up by Hisatake Shibuya in the year 1975 in Tokyo, Japan. They developed lots of reputation as providers of the most effective quality replacement parts for musicals. After 1976, Shibuya began developing his own guitars and since then the ESP guitars are known for great service and its quality. The ESP LTD EC Series EC-10 is a popular Electric Guitar of the company.
Not a bad article, but I’d go even cheaper. As a long time guitar and bass player (no longer gigging) and father, with guitars high and low cost in the house, I would advise parents to get a new Yamaha, Epi, or Squier (or a good used one of those) for a couple hundred $ or less and a decent Fender or Vox,, Spider, etc modeler amp for the same and see what happens. It has been hard to keep my kids interested, hurts the fingers, and my guitars have low action and play like butter. It isn’t like Rock Star! Reportedly 90% drop out in the first year, and by the time you are my age maybe 99% have quit! Lot of used stuff in the closets out there! So go to a decent store or a friend who plays and seek their help and advice. And get it set up by someone who knows what they are doing. My current favorite setting out and being played a lot is a 1996 Korean Squier Strat Deluxe, used for $99. So if they say spend over $400 total amp and guitar, ask someone else! They lose value real fast!
The Ford Model T was revolutionary. The only horses involved were under the hood, which was a big enough deal at the time, but we now know that the assembly line process behind it would go on to revolutionize the way we manufacture tools, vehicles, and the rest of our modern appurtenances. In all honesty, the Model T had a long way to go. Consider how that horseless carriage would hold up today. When we put nostalgia and historic significance aside, it’s the last car you’d want take a long trip in or depend on for daily commutes. From a modern day performance perspective, the Ford Model T was garbage.
For solidbodies there is usually a one- or two-letter prefix indicating the body style or general model. This is followed by a dash and a number which usually indicates the number of pickups (e.g., J-1), although on occasion the number indicates the year of introduction (e.g., TG-54). Guitars bearing a vibrato usually appended an “L” after the pickup number (e.g., MJ-2L).
The great Mark Knopfler has arguably the cleanest, smoothest electric guitar tone of all-time. Playing without a pick, his fingers blaze from note to note without any hint of misplacement. Even when he’s playing with blatant distortion, his notes ring out smooth and completely decipherable. While he has quite a few great guitar songs, a great sample of his playing can be found in the Dire Straits song, “Sultans of Swing.”
It's Mal - i posted the comment ref the muted G string on my Epi Les Paul 1960 Tribute - thanks for your response it was very good of you. I'm going to be playing (when i say playing i really mean faffing with) my guitar later so i'll have a look at the saddle, though i have rubbed my finger over it to see if there were any obvious issues which there wasn't. I have also rubbed the graphite from my clutch pencil over it when changing strings - no improvement; i'll get magnifier out and take a closer look and let you know, i may take you up on your kind offer if i'm still stumped.
The Effect:Chorus is one of the most recognized pedal effects, dating back from the beginning of the 70’s, and later on popularized in the 80’s, it was the most used effect on guitar pedals back then, and no guitarists dared to step foot on stage without the classic Boss CH-1 Stereo Super Chorus Pedal or MXR Micro-Chorus, to name a few. Originally, Chorus pedals came in Analog form, however today the market is mixed with both Analog and Digital pedals, with the difference between the two being that Analog modifies the signal directly, while Digital takes the original analog sound coming from your guitar, converts and modifies it into digital form, before finally converting it back to analog form prior to its release.
“The acoustic guitar is something you can travel with easier and make money with easier,” Salas said. “When I used to tour with Rod Stewart, we had jets and gigantic trucks but now there’s no record-company support so no there’s tour support. Record companies aren’t offsetting the tour expenses because they can’t make their money back in record sales.”
And on that (low) note, I’ll wrap up. While many bass parts nowadays are probably laid down with samples and synths, by keyboard players and guitarists, what you’ll get from a real bassist is more than just his sound, it’s the magic in his fingers, and his bass-players’ sense of just what to play to perfectly complement the song—it’s certainly worth a little extra effect to take advantage of what the true masters of the low-end have to offer.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Natural
A humbucker pickup is electrically equivalent to two single-coil pickups wired together in series. Coil splitting involves shorting one of the coils to ground, essentially turning the humbucker into a single-coil pickup (not a perfect replica, though, as the magnetic circuits of the two pickup types are different). This is usually done with a DPDT switch, but can also be done with a push-pull pot. Some manufacturers have used a pot to vary the amount of signal shorted to ground from one coil, thus producing a range of tones between a humbucker and a single-coil. Coil splitting results in a sound that's brighter and has less output than a full humbucker. It also eliminates the humbucker's noise-cancelling properties. This modification requires the start and end of both coils to be exposed, which is more commonly available on aftermarket than stock pickups.[17][18]
1966 Yamaha FG180 Nippon Gakki Japan crafted over 50 years ago early RARE light GREEN LABEL in top vintage condition WoW Now at JVGuitars we are very proud to present such a SWEET and RARE FIND folks... This is an excellent example of the Japanese Vintage Yamaha FG180 is from 1966 Folks that right an oldie but a real goodie for for sure she is about 51 years old and as you can clearly see from our high resolution pictures it has been very nicely taken care of for over 5 decades just for you today thats AMAZING!!! WoW She's one of the very first of the highly sought after original first FG180 run with its light green label FG180 prototype to the later 1970's FG180 Red Label, She's HERE NOW at JVGuitars its been Pro set up and polishing and is all round vintage excellent condition no cracks no issues no warps no pulling no funny business from what I see and thats a lot of guitars this guitar is far above average for such a vintage piece. she's in top playing condition and the cosmetics are very good as well with natural play wear and patina of such a well loved guitar. Here are the General Specifications Scale Length 650mm (25 9/16") Body Length 505mm (19 7/8") Total Length 1038mm (40 7/8") Body Width 412mm (16 3/16") Body Depth 100 - 118mm (3 15/16" - 4 5/8") Nut Width 44mm (1 3/4") Top Material Sitka Spruce Back Material Mahogany Side Material Mahogany Neck Material Mahogany Fingerboard Material Rosewood Fingerboard Radius R400mm (15 3/4") Bridge Material Rosewood Nut Material Urea Saddle Material Urea Bridge Pins Black ABS Tuners Open Gear (Chrome) Body Binding Rosewood + Cream + Black Soundhole Inlay White + Cream + Black Pickguard Black Body Finish Gloss Neck Finish Gloss Color Natural Case FREE Original Marigold lined Semi hard Chipboard case. This Rare FG180 has been treated with care and respect and love for 5 decades and someone is going to be very pleased in deed. To purchase this rare beauty. contact Joe at: jvguitars@gmail.com quality .
It has been stated repeatedly that the CEO is a challenge, toxic whatever and yes, all of it is true. Many if not most people who take a management position here don't last a year. This is especially true at Corporate where at any given time half of the positions are open because employee turnover is off the charts and they are horrible at recruiting talent to get replacements hired. That's a really bad combination to have in a company. So the first question you have to ask yourself is: do you want to show a job that only lasted six to twelve months on your resume with a company that has a positive, almost cult like global brand image? Or another way, how will you explain your short tenure to the next company you interview with and make them believe you weren't the problem? When I was outside Nashville and told people I worked for Gibson 100% of them said "that's a great company" even though they had no clue. It's highly likely your next potential employer will think that way as well.
The electric guitar was essentially born in 1929—long before the advent of rock and roll music. The first commercially advertised electric guitar was offered that year by the Stromberg-Voisinet company of Chicago, though it was not a smash hit. The first commercially successful electric, Rickenbacker’s “Frying Pan” guitar, didn’t kick off rock ’n’ roll yet either, but it did inspire competitors to jump into the electric guitar market. Invented in 1931, the Frying Pan had an electromagnetic pickup made out of a pair of horseshoe magnets placed end-to-end to create an oval around the guitar’s strings, with a coil placed underneath the strings. The pickup, a device that converts the strings’ vibrations into electrical signals that can be amplified, was bulky and unattractive, but it worked. The commercial version of the Frying Pan was a hollow cast-aluminum lap-steel guitar, and wasn’t an immediate hit beyond some Hawaiian, country, and blues musicians. It differs from the traditional Spanish-style guitar in that it is played horizontally, on a stand or in the player’s lap, and has a sliding steel bar that can be moved along the frets for a gliding effect.
Surprisingly, perhaps, given their reputation for fragility, ribbon mics also seem to be widely used for electric guitar, with models from Beyerdynamic, Coles, RCA and Royer all putting in appearances. Producers using ribbons include Thom Panunzio, Joe Barresi, Steve Albini, Ed Cherney, Bill Bottrell and Butch Vig — Eddie Kramer even goes as far as to say that "to me, the best guitar mic is the Beyer M160, which I've used for 30 years on Hendrix, on Zeppelin, on everybody."
By 1941, much of the pre-war Supro line had disappeared, to be replaced with what would eventually turn out to be a good portion – and look – of the post-war Supro line. Gone were the Supro Avalon Spanish, the acoustic resonators and the nifty amp-in-cases. The Supro Avalon Hawaiian was gone, in name, though its spirit was directly inherited by another lap, the Clipper. Also gone were the mated pickups in favor of a more traditional design with exposed polepieces. These with some variations, would prevail for the next decade or more.
Most modern effects use solid-state electronics or computer chips. Some effects, particularly older ones such as Leslie speakers and spring reverbs, use mechanical components or vacuum tubes. Effects are often used as stompboxes, which are typically placed on the floor and controlled with footswitches. They are also built into amplifiers, tabletop units designed for DJs and record producers, and rackmounts, and are widely used as software VSTs.
{ "thumbImageID": "4003-Bass-Midnight-Blue/513600000089000", "defaultDisplayName": "Rickenbacker 4003 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Blue", "sku": "sku:site51274034491813", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Midnight-Blue-1274034491813.gc", "skuImageId": "4003-Bass-Midnight-Blue/513600000089000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Midnight-Blue/513600000089000-00-60x60.jpg", "imgAlt": "" } , { "name": "Jetglo", "sku": "sku:site51274034491793", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Jetglo-1274034491793.gc", "skuImageId": "4003-Bass-Jetglo/000000107918146", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Jetglo/000000107918146-00-60x60.jpg", "imgAlt": "" } , { "name": "Mapleglo", "sku": "sku:site51274034491783", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Mapleglo-1274034491783.gc", "skuImageId": "4003-Bass-Mapleglo/000000107918138", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Mapleglo/000000107918138-00-60x60.jpg", "imgAlt": "" } , { "name": "Fireglo", "sku": "sku:site51274034491780", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Fireglo-1274034491780.gc", "skuImageId": "4003-Bass-Fireglo/000000107918062", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Fireglo/000000107918062-00-60x60.jpg", "imgAlt": "" } ] }
He embodies the stylish sideman identity forged by guitar greats like George Harrison and Keith Richards: a neatly trimmed pudding-basin haircut, and a stage presence that never upstages the frontman. Yet, he is intriguing in his own right. Marr’s post-Smiths career has been stellar. He’s worked with everyone from New Order’s Bernard Sumner (in Electronic) to Oasis to John Frusciante, and has been quite active recently with both Modest Mouse and the Cribs. He has an uncanny knack for being around whenever cool music is happening.
Hi! In this instructable I will be showing you how to fix and/or upgrade guitar electronics. This is applicable to most electric guitars, but I will be using a Fender Stratocaster. It is easier than most people think, especially if you know how to solder. Before you start, find a wiring diagram for your guitar and purchase the parts that are needed.

So here we are at the end of our journey (well, probably not yours). Maybe you have found the best guitar practice amplifier from this list and cannot wait to buy it or maybe you still want to have your options. BUT my point is that starting with an amplifier for practice is a great idea. Not only will the amp serve a very particular purpose it was made for but you will also save quite a lot of money. For instance, most amplifiers under $100 are great for practice so you can check out our list of the best cheap amplifiers for beginners. And while I know a lot of people don’t like the idea of “cheap” being in the same sentence as their instrument or equipment, the thing is cheaper does not necessarily means bad. Is a $100 amp going to win over an amplifier in the best amplifiers $1000 list? Probably not, but as I already mention the best “objective” amplifier (or what brands and people deem to be the best at the moment) is not always a good option for everyone. That is especially a case with someone who is just starting off their journey into the world of music, amps, guitars and everything of that sort.

The 2008 Les Paul Standard is one of the first models from Gibson USA to utilize the revolutionary Plek machine in setting up the guitar. The Plek is a German-made, computer controlled machine that carefully measures each fret, along with the fingerboard height under each string, and then automatically dresses each fret, virtually eliminating string buzz and greatly improving the overall playability of the guitar. This pioneering process does in minutes what it takes a luthier several hours—sometimes even days—to accomplish. Every fret is accurately aligned, and the guitar is properly intonated, leaving the instrument “Plek’d” and amazingly playable.
Solid body guitars were the next step in guitar development, with Leo Fender creating a modest instrument called the Broadcaster, which was then rebranded as the Telecaster. The Stratocaster came later and, in addition to the changes in the pickups, included contours in the body that made the guitar more streamlined and easier to play while standing up. Today, the Stratocaster is still the most iconic electric guitar shape; it’s associated with guitar wizard Jimi Hendrix, and many beginners end up with a Stratocaster-style guitar. Gibson introduced their own line of solid body guitars, the considerably swankier Les Paul.
I have been playing for two years. I use to play (and still have) a fender squier. Today I bought a Lyle on impuls. I wasn't planning on buying one, i just walked in and it looked so beautiful. I have a feeling it is about 10 years old or so, but the sales man didn't know much other than it was a Lyle and it had new tunning pegs on it. I got it for 150$ and i would REALLY love to know more about it. Thanks.
A distortion box produces what we call hard clipping, as opposed to an overdrive pedal that produces soft clipping. What does that mean? If we were to look at a note on an oscilloscope we would see a wave (hence the term sound wave) with a nice rounded top and bottom. When we overdrive or distort a note the top and bottom of the sound wave flattens out, or clips. The more clipping of the wave the more distorted the note. A fuzz pedal produces so much clipping it is seen as a square wave, completely flat on the top and bottom of the wave. There are many excellent distortion boxes on the market but some classic industry standards are the Rat distortion box, the Boss Super Overdrive (a bit more of a distortion box really), MXR Distortion +, Boss Distortion, and the Boss Heavy Metal Pedal.
Over the years, authentic 1950s Les Pauls have become some of the most desirable and expensive electric guitars in the world. Only 1700 were made between 1958 and 1960[citation needed]. Today, a 1959 Les Paul Standard in good condition can be easily priced between $US200,000 and $US750,000, making it the most valuable production model electric guitar ever built (however, Gibson Custom Shop reissue versions of the 1950s and 1960 Les Paul can be purchased for less, between $US3,000-$US6,000 – certain artist signature model versions of the guitars are considerably more expensive). Jimmy Page has been offered 1 million pounds (1.6 million USD) for his “number 1” 1959 Les Paul should he ever decide to sell it.[22]
Amp modeling is a polarizing topic for some guitarists, but it shouldn't be because the alternative is still widely available. If f you feel that amp modeling will just be a distraction then go for a straightforward amplifier. For those who do appreciate the versatility that they offer, there are now many options on the market, from the usual digital recreations of popular amps, to those with analog based amp voicing approximations.
I like some of the less known models and smaller brands. Deans are very nice, Cort has some very nice models (and cheap crap too..), Fenix LP copies (depending on the model/age) are great and I've got a Morgan strat that seems to just get better every year. Korean Yamahas are pretty nice and so are the ones from Taiwan. Korean/Chinese Epiphones vary quite a bit so try before you buy. Don't care for most Korean Ibanez and ESP/LTD models.
Octave/Pitch Shift – A frequency-based effect that takes the input of your guitar tone and shifts it in pitch anywhere up to an octave above or below. This is useful to simulate a bass guitar line or the higher pitched strings of a twelve-string guitar. Some octave or pitch shift pedals double your guitar tone before shifting making them more akin to Harmoniser pedals.
Others, however, will look to Jimmy Page, Pete Townshend, or the Beatles, or credit the first recorded use of a fuzz box in Britain to Big Jim Sullivan’s performance with a custom-built Roger Mayer fuzz on P.J. Probey’s 1964 No. 1 hit single ‘Hold Me’ (according to Mayer himself)—or, supposedly, Bernie Watson’s solo on Screaming Lord Sutch’s ‘Jack The Ripper’ in 1960. Or, a little later, the one more of us remember, Keith Richard’s worldwide smash-hit fuzz riff for the Stones’s ‘(I Can’t Get No) Satisfaction,’ courtesy of a Maestro Fuzz-Tone.
I am a guitar player, teacher and composer. I started playing piano at the age of seven. Five years later I had my first guitar performance with a local band. My style was inspired by guitarists like Nuno Bettencourt, Joe Satriani, Jerry Cantrell, Marty Friedman, Zakk Wylde, Steve Vai and Dimebag Darrell. During my career I had many bands and music project, going through different styles of original music and sometimes cover bands. In 2012 co-founded the band Vulgar Bulgar (Pantera tribute band). In 2013 started teaching guitar at Rockschool.bg. Currently freelance guitar teacher, session musician and solo performing artist.
Jump up ^ DeCurtis, Anthony (1992). Present Tense: Rock & Roll and Culture (4. print. ed.). Durham, N.C.: Duke University Press. ISBN 0822312654. His first venture, the Phillips label, issued only one known release, and it was one of the loudest, most overdriven, and distorted guitar stomps ever recorded, "Boogie in the Park" by Memphis one-man-band Joe Hill Louis, who cranked his guitar while sitting and banging at a rudimentary drum kit.
Ibanez Artcore AF75 Electric Guitar Another hollow body guitar to whet your appetite! The Ibanez Artcore AF75 isn’t as “old” as the other models here but it has earned a huge following because of its affordability, quality workmanship and versatile sound. Suitable for a variety of music styles, the Ibanez AF75 Artcore is also perfect for beginners eager to get started on a moderate budget.
Frets & Necks did an AMAZING job on my RG7421. They installed my BKP Black Hawk p/u's and new tone/volume pots. Frets & Necks service was above and beyond, fast and super knowledgeable. I am very pick...y about who works on my guitars, I am beyond pleased that I chose Frets& Necks to work on my RG. I will be bringing my RG7421 back to Frets & Necks for future upgrades very soon. Be good to yourself and treat your guitar, give Frets & Necks a try. You won't be disappointed. Thank you F&N. See More
Les Paul developed one of the first practical solid-bodied electrics made of wood, which he dubbed "The Log". He built the prototype himself -- possible the first practical solid-bodied electric -- in the late 1930s. In 1941, he approached Gibson about making it, Gibson, but they weren't initially interested. Meanwhile, Leo Fender had been independently been developing his own solid bodied guitar, which was released commercially as the Esquire in 1950. By then, lots of people were recording electric guitar.
Two new 325s were created for Lennon and were shipped to him while The Beatles were in Miami Beach, Florida, on the same 1964 visit to the US: a one-off custom 12-string 325 model and an updated six-string model with modified electronics and vibrato. He used this newer 6-string model on The Beatles’ sequentially “second” appearance on The Ed Sullivan Show.[7]

The Ibanez GRX20ZBKN is part of the GIO series developed for players who want Ibanez quality in a more affordable package. The guitar is suitable for all types of music, but often a favorite of rock, metal and shred lovers. It features an alder body and a maple neck which feels sleek and fast. Great for moving quickly up and down the neck for those fast riffs and licks. A solid good looking low budget guitar for the beginner and intermediate.
Loop pedals — or loop stations as they're often called — have exploded in popularity in recent years as more and more players have embraced the ability to build multiple parts and loops during gigs and practice sessions. With popular options like the TC Electronic Ditto Looper, guitarists can lay down a basic chord progression while soloing on top. Loop stations are also a popular option for vocalists who can use these devices to build harmonies or deploy creative vocal effects. Whether you're in need of a basic option like the Electro-Harmonix 360 Looper or a more elaborate solution like the Boss RC-505, there's never been a better time to get into the world of looping.
Chorus pedals really made their mark in the 80’s with the likes of the Boss CE-1 and CE-2, the Electro Harmonix Small Clone and the TC Electronics Stereo Chorus. I found a nice definition of chorusing on Wikipedia: “Chorus pedals mimic the effect choirs and string orchestras produce naturally by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or “vibrato” to part of the signal while leaving the rest unaltered.” A chorus is a modulation effect but the modulation we hear is produced by delaying the wet signal a very short duration causing the doubling effect we hear. So it is actually a time based effect.
These guitars also appeal to adults who played in their youth and would like to pick up the instrument again. Fortunately, they’ll find that high-efficiency, low-cost overseas manufacturing has created a new generation of inexpensive guitars that play and sound very much like more expensive models—something that wasn’t true 20 years ago, when few cheap guitars were worth playing. We also discovered in our Best Electric Guitar Amp for Beginners article that there are several very nice amps available for less than $100, so an adult can get back into the game for well under $300.
{"product":{"id":"114488369","stock":"instock","price":"799.99","name":"Legacy Solid Body Electric Guitar","download":false,"sku_id":"114488369","checksum":"402390681023","rep_id":"site5114488369","displayId":"114488369","sku_display_id":"114488369","sku_rep_id":"site5114488369","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
When recording an electric guitar, the amp is the instrument as far as the mic is concerned, and mic position is important. While a lot of sound comes direct from the speakers as you'd expect, a significant level is also emitted from the back and sides of the box via panel vibrations. Also, an open-backed cabinet throws about as much sound out of the back of the box as it does out of the front. Choosing a mic for recording electric guitar isn't difficult, as virtually any decent mic of any type can be made to produce usable results. If I were to generalise, I'd say that British recording engineers tend to use cardioid, dynamic models while American engineers seem to prefer capacitor microphones. The dynamic mic produces a solid sound with a smooth high end, while the capacitor mic's increased definition produces a brighter, more open sound when used in the same way. However, the mic position has just as much bearing on the tone as the mic itself.
Hendrix, Van Halen and, uh, Mozart are the musicians to thank for most heavily influencing death-metal shredder Azagthoth, not that they really come through in the jagged riffs and cheetah-fast solos of Morbid Angel classics like “World of S—t” and “Where the Slime Live.” But that’s because he has blazed a tension-filled style all his own (when he solos, he enters a mystical mind state he calls the “Temple of Ostx”) that is finally getting more praise than early antics like cutting himself with a razor before hitting the stage and extolling Satanism.
FRET LEVELING ("Filing", "Dressing"...) $150.00 Worn or uneven frets can he filed level in many cases, if there will remain enough height on the fret to suit the customer (and practical playability). Frets must be lowered to the height of the lowest pit that can be found. Sometimes, replacing the most worn frets is appropriate. Includes "set up" adjustments.
switches between each pickup, weather its 2 or more you've got one to switch between each of them. pointed up = neck pickup (suggested for solos and high pitched stuff) middle = both pointed down = bridge (suggested for metal or lead guitar) the fenders with a 5 way blade switch its all the way up = same way , solos up a bit = neck and middle pickup middle = all the pickups (this can vary between guitars) down a bit = middle and bridge down = the bridge by itself some guitars with two pickups have a 5 way blade which you hear 5 clicks , this isn't a broken guitar if its the case you got an awesome slightly new thing called a coiltap which makes say a les pauls neck pickup split the sound inside the pickup and giving you a more fender sounding pickup sound... very cool.
A common misconception of the Lyle brand, among others, was that Norlin sued Matsumoku for copying their designs and shut them down. The actual lawsuit was indeed filed by Norlin, only not against Matsumoku but Elger/Hoshino--the American division of Ibanez--over elements of the Les Paul and SG guitar designs that Norlin/Gibson had since claimed as a trademark. The case was eventually settled out of court. Japanese companies preemptively altered the designs of their guitars in such a way that they would not be "exact" copies of Gibson guitars. The true story of the demise of the Lyle brand is largely unknown to this day.
Not all stompboxes and rackmounted electronic devices designed for musicians are effects. Strobe tuner and regular electronic tuner pedals indicate whether a guitar string is too sharp or flat.[105] Stompbox-format tuner pedals route the electric signal for the instrument through the unit via a 1/4" patch cable. These pedal-style tuners usually have an output so that the signal can be plugged into a guitar amp to produce sound. Rackmount power conditioner devices deliver a voltage of the proper level and characteristics to enable equipment to function properly (e.g., by providing transient impulse protection). A rackmounted wireless receiver unit is used to enable a guitarist or bassist to move around on stage without being connected to a cable. A footswitch pedal such as the "A/B" pedal routes a guitar signal to an amplifier or enables a performer to switch between two guitars, or between two amplifiers.
GUITAR RIG 5 PLAYER is based on the powerful GUITAR RIG 5 PRO, providing you a straightforward and easy user interface with professional components. The advanced tag-based preset browser makes it easy to find and organize your effect settings. Drag and drop components to the rack to create custom effect chains, and adjust all settings to your needs in no time.
Package arrived in a timely manner and in good shape. Guitar is alright, built to look like a high-end model but closer inspection proves otherwise. I was fine with that but then had to remove the rear cover of the amp to reconnect a power wire that had become disconnected during shipping just to get power to the amp. After that I still had no sound through the amplifier. I checked the amp and cable with another guitar and all worked fine. That lead me to replace the guitar battery that came with the unit with a brand new one and the problem still persisted. After destringing the instrument and checking the interior connections I am convinced that the issue is in the pickup under the bridge or in the onboard electronics. Hopefully the replacement will work better but buyers should be cautious when ordering this product. The guitar really is beautiful for the price but certain quality control issues leave me wondering, especially once the Amazon product support expires on it.
Engineers invented the first loud, powerful amplifier and speaker systems for public address systems and movie theaters. These large PA systems and movie theatre sound systems were very large and very expensive, and so they could not be used by most touring musicians. After 1927, smaller, portable AC mains-powered PA systems that could be plugged into a regular wall socket "quickly became popular with musicians"; indeed, "...Leon McAuliffe (with Bob Wills) still used a carbon mic and a portable PA as late as 1935." During the late 1920s to mid-1930s, small portable PA systems and guitar combo amplifiers were fairly similar. These early amps had a "single volume control and one or two input jacks, field coil speakers" and thin wooden cabinets; remarkably, these early amps did not have tone controls or even an on-off switch.[1]
Several years later, Gibson issued its third Jimmy Page Signature guitar, this one based closely on Jimmy Page’s #2. Issued in a production run of 325 guitars, the guitar more accurately reproduced Page’s heavily modified No. 2 than the original Signature model of the 1990s, and featured the 4 push-pull pots, the two mini-switches under the pick guard, accurate tuners and sound-accurate pickups (the same pickups that were used in the 2005 Jimmy Page No. 1 Signature), as well as an accurate neck profile. As in the original Signature model of the 1990s, pulling up the neck or bridge volume pots switched the respective pickups’ coils from series to parallel, and pulling up the tone pots switched the respective pickups from humbucking to single coil. The two push-button DPDT switches mounted beneath the pickguard provide universal switching functions, regardless of the positions of the push-pull pots. With the switch mounted toward the bridge-end of the pickguard in the out position, the bridge pickup’s phase is reversed. With the switch mounted toward the neck-end of the pickguard in the out position, both pickups are wired in series and out of phase. With both switches out, both pickups are in series and in phase. The Jimmy Page “Number Two” Les Paul is finished with a sunburst finish to replicate the appearance of the original guitar. 325 of these guitars were made, with the initial 25 being autographed by Jimmy Page and priced at US$25,000 when new.

Three acoustic guitars were offered in 1971. These were glued-neck models with roughly Martin-shaped heads and pickguards slightly larger and squarer than a Martin. All had spruce tops (presumably plywood), mahogany bodies and necks, rosewood fingerboards and dot inlays. These appear to be Japanese, not Brazilian Gianninis. The bridges are glued on, with screw-adjustable saddles and pins. The U3012 Auditorium was a Spanish-shaped steel-string and cost $89.50 plus the cost of a case. The U3013 Grand Auditorium was a dreadnought costing $105. The U3014 Twelve String cost $120.
For most players, the ideal location to place modulation effects—which include phase shifters, flangers, chorus, rotary, tremolo, vibrato and so on—is directly after a compressor and/or overdrive/distortion pedal. When these effects are distorted after the fact, the sound tends to smear and lose definition (particularly with chorus), although there are a few exceptions where distorting a flanger or phase shifter can sound really cool. The best example is Eddie Van Halen, who doesn’t use distortion pedals and instead generates all of his distortion from the amp. When a flanger or phase shifter is placed in front of a distorted amp or overdrive pedal, it can create dramatic thick, jet-like phasing and flanging effects (See Example 2, below).

Fender California Coast Series acoustic guitars are already being used across multiple musical genres by top alternative, indie, punk and grunge artists/bands, such as: Culture Abuse, The Regrettes and Dear Boy, as well as singer-songwriter Aaron Lee Tasjan and guitarist Angela Petrilli – accompanying each on their musical journey toward exceptional artistry.

My guitar is in excellent condition and is all mostly original. The tuners are replicas of the original Klusons, and it came with non-original wooden legs. The legs were originally `sold separately, so it’s possible that the original owner opted for cheaper off-brand legs instead. I prefer to use a table-type keyboard stand anyway, mainly because it frees up more space for my feet underneath. This is my primary gigging steel; it’s reliable and versatile, and it usually turns a few heads as well due to its unique appearance. Aside from a broken name badge, it’s in excellent condition; it came with the cleanest original Valco case I’ve ever seen. There is some slight deterioration of the chrome plating, but otherwise there is little wear to be found. I previously owned a Supro Console Eight, and liked it so much that I traded it for the double-neck version. The Console Sixteen is a rare bird because it was produced only briefly; it first appeared in the 1958 Supro catalog and last appeared in 1959.

I found a Decca guitar lying in my woodworks shop at school, and my teacher let me take it home. My friend and I have been restoring it, and we nearly have it finished, the only thing missing is the tremolo spring. However the model of the guitar is kind of odd as we have not found any record of what type of guitar we own. Its a double cut-away archtop, with a tobacco sunburst and 3 single coil pick ups. We have looked everywhere and haven't been able to find any record of a 3 pick up Decca guitar. We're still looking...

I have made over a hundred solid body electric guitars by hand. I can use the same pickup in a plexiglas, or a wood body, utilizing a wood neck, plugged directly into a tube amp, and they do sound different. There is no way anyone can deny me my personal experience on this. I think whats going on here is the new 3D printer body's that are being pushed for their capability of unusual designs. Nothing wrong there, as i have some of my own designs i am going to try as well. I have a contact that makes aluminum guitars, and they also produce a different sound.
The neck is also made of mahogany and is hand set into the body. Looking at the fretboard, we see a standard rosewood design with white binding and classic trapezoid inlays. Epiphone went with a set of Alnico Classic humbucker pickups. These are very close to what the original Gibson solution had to offer. Classic rock and blues just flow out of these, although you are more than free to crank up the gain and blast some heavy riffs.
If you really want your guitar strings to stand out as well as your playing does, then these colourful options from DR are a novel eye-catcher. For even more fun, stick them under a UV light and they’ll glow, too! They might also serve a practical purpose for beginners, too, as new guitarists can quickly identify specific strings based on their colour.

A diagram showing a wiring modification for a Les Paul or a similar electric guitar with two humbuckers. Wiring schemes using four push-pull pots for additional pickup combinations were made popular by Led Zeppelin guitarist Jimmy Page and later produced as a signature model by Gibson. The modification shown in this diagram is an evolution of the original concept combining coil splitting, phase cancellation and parallel/series switching for a total of 22 different pickup combinations.

Launch price: $1,949 / £1,639 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 21 | Pickups: 3x Pure Vintage '65 Gray-Bottom Single-Coil Strat | Controls: Volume, neck tone, bridge/middle tone | Hardware: Pure Vintage 6-saddle Synchronized vibrato, Pure Vintage Single Line 'Fender Deluxe' tuners | Left-handed: Yes | Finish: Olympic White, 3-Color Sunburst, Candy Apple Red

The focus of my career has been audio journalism, but I’ve been active as a musician since taking up guitar seriously in the 1970s. I’ve played various stringed instruments with jazz, rock, and folk groups in New York and Los Angeles, and I currently play double bass in three jazz groups in Los Angeles. (I sub regularly in a couple more groups.) Having conducted innumerable multi-listener comparisons of audio products over some 25 years, I have a good idea of how to conduct fair product tests. I own two guitar amps, which I loan to visiting guitarists and use with my electric ukuleles, and I’ve even built a couple of guitar amps, so I understand how they work.
A more affordable but still high-quality pair from Audio-Technica would be the M20x, which still shares some features with the premium products offered by this manufacturer. The drivers — in this case at 40 mm in size — feature the same rare earth magnets, and the voice coils are made of copper clad aluminum wire to provide for the clearest possible tones.
If this doesn’t work, or you’re just a little paranoid about hooking the guitar directly into the PC, you can get one of these. This is the Line 6 Pod Studio GX, and it’s a great value and pretty much a one-stop shopping starter kit. The box you see there is a guitar USB interface, with an input designed for guitar. It’s also got a headphone output, so you can listen through the interface. I had an older version of this ages ago, which I used for basic guitar input until I got some more advanced recording gear that worked well with guitars.
The Fretted Synth website has mysteriously disappeared (the likes of Native Instruments not happy that they’re giving away so much goodness for free??), so we’re linking to the Rekkerd page that still seems to host the plugins. FreeAmp3 really shouldn’t be free: it features masses of sound-shaping potential and the user interface looks great. If you just want one (free) VST guitar plugin, get this.
This funky looking piece is a vintage Japanese-built Bruno MaxiTone semi-hollow guitar with a sunburst finish and two single-coil pickups with a 3-way blade pickup switch. We love the old Japanese electric guitars of the '60s where they had great looking retro cosmetics, such as this one with pearloid pickguard as well as pearloid base plates underneath the pickups. The guitar is in good playing condition, the vibrato tailpiece has been anchored with a screw in lieu of the spring, and there is a chip in the plastic mounting piece of the neck pickup. The guitar plays great and has a cool vintage Garage Rock tone to it!

Prior to being acquired by Gibson back in 1957, Epiphone once competed with the most popular guitar brands in the market - including Gibson. These days, Epiphone is known for being the affordable sub-brand of Gibson, producing cost-effective alternatives to many of their premium guitars. Many experienced players today credit this brand for manufacturing their first ever instrument, and their popularity in the entry level market continue to soar high.
Description: Body: Honduras Mahogany - Body Construction: Solid - Top Wood: Maple - Neck Attachment: Set - Neck Wood: Honduras Mahogany (Bigleaf Mahogany, Brazilian Mahogany, Tropical American Mahogany) - Fingerboard: Ebony - Frets: 22, Jumbo, Medium - Inlay: Abalone Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Floyd Rose Style Locking Tremolo - Bridge Construction: Ebony - Cutaway: Single - Hardware: 1x Volume Control, 1x Tone Control, 3-Way Switch, Sperzel Tuners - Pickups: Humbucker - Pickup Configuration: H-H
• Wrap around: On wrap around tailpieces, what’s wrapping around is the string. Strings are slid into the tailpiece from the front and then pass over the back and top of the bridge before making their journey up the neck. This system creates less string tension. Some players report tuning and intonation issues with these tailpieces. Others swear by them.
Guitar strap: If you intend to stand up while playing on guitar during live shows (and most people do), then you need to practice in the same position like when you’re playing live. Your muscles and hands are in a completely different position when you’re sitting down and when you’re standing, and that’s why you MUST get a strap right from the start and practice standing up, as well as sitting down. Price: $10 – $15 should do the trick.
Slash is a longtime fan of legend Seymour Duncan's hand-wound pickups, and for his new Epiphone Firebird, Slash choose custom Seymour Duncan "Slash" open coil-humbuckers for the rhythm (APH-1) and the lead positions (APH-2). These were Slash's first custom pickups made with Seymour Duncan and feature Alnico II magnets and are slightly overwound for a boosted output. Each pickup has a single conductor cable, a long-legged bottom plate, and a wooden spacer. Controls include individual Volume and Tone pots with traditional Black Top Hat knobs with metal inserts and pointers along with a Switchcraft 3-way Toggle switch. Tone controls for both pickups also feature Sprague "Orange Drop" capacitors (0.022uF, 600V, 5%), the same capacitors Slash uses on his custom designed Les Pauls.
There's no denying the popularity of the Stratocaster, thanks to it being the weapon of choice for a long list of iconic players that include Jimi Hendrix, Eric Clapton and Jeff Beck to name a few. The American Professional Stratocaster is the latest iteration of this classic, carrying over much of the look and feel of the original, but more reliable and road worthy.
When speaking of electric guitars and pickups we are usually talking about magnetic pickups, as they use magnets to convert the vibration of the string into an electric signal, and these can be divided into 2 main types: The Humbucker (Double-coil) and the single coil pickup. Double-coil pickups are basically single coil pickups mounted side by side and the sound they pick up is "integrated" through to the output.
Do you have a short budget? Then we have included the Dean Vendetta XMT model in my top 10 electric guitars review list. This is very little known guitar and you’d be forgiven if you have never heard of it before. But we can tell you with confidence that once you buy this guitar it will exceed your expectations and this is very much pocket-friendly.

Seller: bennick2013 (4) 100%, Location: Marietta, Georgia, Ships to: US, Item: 302905274242 Beautiful red body and maple neck looks great despite minor dings and scratches. Neck is straight and intonates well, action just fine with no divots or dead spots. Get it now before they become scarce and PLAY Condition: Used, Condition: Very Good, Brand: Lotus, MPN: Does Not Apply, String Configuration: 6 String, Body Type: Solid, Body Color: Red, Model: Strat, Model Year: ? See More
Pickup(s) 3 or 2 single-coils, with the latter having a hot humbucker in the bridge position,[1] with the exception of the Acoustasonic Strat and Stratacoustic models, the only acoustic Stratocasters.[1]Most Stratocasters generally came with a pickguard; on certain high-end versions, the pickguard is absent. There are also select models that come with active electronics and HSH, HHH, HH or Hpickup configurations.Humbucker-equipped Strats are often referred to as “Fat Strats”, in reference to the fact that humbucking pickups usually tend to have more bass in the output signal than single coils, thus making the sound “fatter”.
Double-coil or "humbucker" pickups were invented as a way to reduce or counter the unwanted ambient hum sounds (known as 60-cycle hum). Humbuckers have two coils of opposite magnetic and electric polarity to produce a differential signal. Electromagnetic noise that hits both coils equally tries to drive the pickup signal toward positive on one coil and toward negative on the other, which cancels out the noise. The two coils are wired in phase, so their signal adds together. This high combined inductance of the two coils leads to the richer, "fatter" tone associated with humbucking pickups.