Although there have been several copies of Gibson guitars in Epiphone, yet their quality, tone, and artisanship suffice to attract and retain more customers. During the past few years, Gibson has adapted some modifications in their lineup. This includes restoring their classic Les Paul Studio design as Studio T, and the Les Paul Studio Faded, which is an affordable variant.
Despite racial laws still in place at the time, the youngsters knew that they were buying African American music and it didn’t stop them. The shallow radio pop music no longer appealed to them and they found blues music expressed many of the emotions and views. The kids felt a connection to the music, they felt frustrated and wanted a voice and culture of their own.
Now that you know the general protocol to a pedal chain, remember there are no strict rules in music. Introducing alternative ways of setting up your effect signals is what starts new trends and even leads to the development of new genres. There are also indisputably more choices in pedals then ever before. Vintage classics have been reissued in mass, are sounding better then ever, and have become affordable (but I doubt you’ll see that DeArmond toaster pedal version any time soon).

While there’s still 9 more guitars to talk about on this list, you really can’t go wrong with stopping here, at the Les Paul Standard. This guitar is one of the most sought-after electrics in its price range. If you’ve ever played a Les Paul Epiphone before, you know what we’re talking about. Besides being a legendary guitar invented by the artist, inventor, and guitarist, Les Paul, this guitar also has what it takes to be legit, such as ProBucker-2™ and ProBucker-3™ pickups with coil-tapping. You can find this guitar for literally one dollar under $500 at most stores. 

Octave/Pitch Shift – A frequency-based effect that takes the input of your guitar tone and shifts it in pitch anywhere up to an octave above or below. This is useful to simulate a bass guitar line or the higher pitched strings of a twelve-string guitar. Some octave or pitch shift pedals double your guitar tone before shifting making them more akin to Harmoniser pedals.
I remember choosing a floating tremolo equipped electric guitar as my first ever purchase, and I ended up being so frustrated at how hard it is to keep the guitar in tune and how complex string replacements were. To make the long story short, I felt relief when I traded it up for a simpler Fender Strat. These days, floating tremolos have gotten better and easier to setup, but I'd still recommend a guitar with basic stop tail piece or tremolo bridge for beginners - just so you can focus on learning the instrument and worrying about string setup when you have more experience.
The SD is a classic. This had a more exaggerated Jazzmaster shape than the T-60. It had a dramatically swept back lower horn, and an offset pair of waists, looking as though it’s been slightly melted. These had bolt-on necks with the elongated Strat-style head, with round logo stickers. A rectangular plastic control panel was mounted above the strings, with large thumbwheel controls and on/off rocker switches, while a large-ish pickguard was mounted under the strings. The controls on the SD-4L were especially interesting, taking their cue from the Italians, no doubt. The thumbwheels were for volume and tone, while there were a total of six rocker switches. Four of these were on/off for each of the four pickups, but in between were two more. Their function is unknown, but a good guess would be phase reversal between the front and back pairs of pickups. Both models had the rectangular fingerboard edge inlays. With “L” designations, both had vibratos. These consisted of a fairly simple bar for string attachment with a series of springs behind it, all covered with a hinged metal cover. The handle was extremely long. Pickups were the beefy tall rectangular type with metal cases and black plastic center tops with exposed pole pieces (these could be screws or squares). The SD-4L had four pickups, in two pairs, while the SD-2L had two. If I couldn’t have a Spectrum 5, I’d be looking for one of these (I am!).
“The tremolo tail assembly was engineered specifically for the Spectrum ‘5.’ The bridge is an integral part of the whole assembly and is, of course, universally adjustable. The marvel of it all, however, is that the tremolo does not exert any friction (hence no wear and tear) on the strings. The tremolo action causes the whole bridge assembly to move smoothly back and forth.
The best ones are the ones that sound good to YOU and inspire YOU to play better, no matter how old they are, what’s in them or how many features they do or don't have. It follows that there are thousands of possible “best” amps from any number of brands, from old to brand new, that can fit this description. You just have to find the right one that fits your particular needs. Brand names don't matter so much as features here, so that’s why I'm not going to mention them specifically.

Some bass amplifiers have an "overdrive" or distortion effect built into the unit. The Peavey Century 200 has an onboard "distortion" effect on the second channel. The Peavey VB-2 also has built-in overdrive. Aguilar Amplification's AG 500 bass head is a two-channel amplifier, one of which offers a "saturation" control for overdrive. A variety of BOSS combo amplifiers have a built-in "drive" effect. Gallien-Krueger's bass amp heads have a "boost" control which provides a simulated tube overdrive effect. The Behringer Ultrabass BVT5500H Bass Amplifier Head has a built-in limiter and overdrive. The LowDown LD 150 bass amp has a range of overdrive sounds, from a slight hint to heavy distortion. The CUBE-20XL BASS amp includes built-in overdrive.

There’s 2 very small and cheap amps that are widely used by guitarists and by guitar technicians across the globe and the Marshall MS-2 Micro Amp is one of them. The other is number 2 in our list, before you ask… This tiny 1-watt Marshall amplifier may fit in the palm of your hand, but it sure packs a punch and is a LOT louder than you’d expect. Styled just like the classic Marshall amplifier stacks now synonymous with rock n roll, this is one of the best cheap amps thanks to its convenient size, 9V battery powered operation for ultimate portability and the fact you can plug your guitar into it and rock out anywhere you like.
got my dad's guitar after he passed away. its electric solid wood has a tone knob and volume knob next to the cord plug in and two little black slider buttons. I don't know anything about guitars but it only has one marker on the back its on the silver plate and it just says Japan in all caps. there is no brand name on the headstock or anywhere else on the guitar that I can find and I've looked at over many times.

A thermally engineered centre block and bracing make this 335 acoustically louder, open and with more clarity. The 'burst top and back also look more modern than vintage, while the translucent dark brown/ almost-black sides and neck-back finish add contrast that creates a classy appearance, along with the nickel hardware. We also get a lightweight aluminium stop tailpiece with locking studs, but this is all-very-classic ES-335 fare, such as the small block inlays and the small fleur head logo. Again, Gibson's build specs tell us we have MHS 'buckers and here the 'Memphis Tone Circuit' includes matched pots with a tight five per cent tolerance, with the same 'orange drop' tone caps as the ES-275.  Plugged in, it's like all our Christmases have come at once. There's a more solidbody response here, as you'd expect, and it really pushes out the sound. It's expensive, but as an investment, this is one of the best electric guitars on the market.
Hi Torch, appreciate the work gone into this , fantastically informative piece. Good to see such a following as well , too many Gibson / Fender fanatics out there that dismiss Jap / Asian guitars as inferior. Having played god knows how many guitars over 50 years I've had good and bad in both top and lesser known brands. Started off at 15 years old with a Tiesco ( cost me £15 S/H at the time. lol ). Admittedly it was a piece of junk, but hey it got me started. Just picked up a Strat copy made in China for £10 ( as new condition) Branded Excell , out plays my Aria by a country mile. I have an old acoustic here about 40 years old, cost £62.50 at the time. No place of origin , serial No or anything. Imported by Rose Morris with the brand Avon on the head stock. This baby out plays any acoustic I've ever played, including a couple of Martins, As any guitarist should know a guitar is how it feels and plays not it's name. Nothing wrong with Jap / Asian guitars , could be made in Iceland for all I care it's the guitar that counts. Keep up the good work. Regards and thanks.
Terada was one of the smaller Japanese manufacturers of acoustic guitars during the period of 1960 to 1980, producing products for Epiphone, Fender Japan, Grapham, Gretch and Vesta. Terada produced some Kingston badges until 1975. Other badged guitars produced by Terada include some Burny badges and interesting Thumb guitars. Terada has been in continuous operation since 1912.
I've been asked why it took so long to make this record. Well, it didn't really take too long to make this record. It took six months to make it. What I'd been doing before that was hopefully a journey I can continue. I guess what we play is still indie or alternative, I don't know all the different terms these days -- I've kind of lost track about what label I'm supposed to be these days. But it's still the kind of music I started playing when I was a kid, really. I'm fronting a band I could have fronted at fifteen or sixteen, so that's quite cool.
We've already shown you one of Epiphone's Les Pauls. However, that guitar and this model we're looking at here are simply not comparable. Les Paul Standard features a much better set of pickups as well as hardware. Each of the four available finishes on this thing is superb and includes a number of subtle details which really add to the beauty. Most importantly, Epiphone's Les Paul Standard will give you a true taste of what a legit Gibson Les Paul tastes like without breaking the bank.

Peerless hollowbody guitars are excellent at this price range. Both of these brands manufacture from factories in South Korea. PRS SE is made by World Instruments Co. and they have consistently high standards - all brands made in this factory will be exceptional. Peerless is a company which used to manufacture high end guitars for other brands such as Gretsch and Gibson, and then launched their own brand. They are exceptionally good guitars.

Guitar pedal multi-effects units comprise several effects in just one package. Multi-effects units utilize digital processing to bring out different sound effects when playing guitar. These digital multi-effects pedals come with internal memory in order to save your individual settings. Among the top-rated multi-effects brands you might want to check out are the DigiTech RP and GNX series, the Boss ME-20 and ME-50 models, the Boss GT-6 and GT-8, the Zoom G2, G3, and G5, various Behringer models, and the Line 6 POD.
The music industry is one that has really felt the effects of the digitalization of the world over the last few decades. In the 1970s and '80s, recording, composing and production work would have been done manually with a complicated series of hardware mixers, synths, sequencers and other devices. Today, all you have to do is plug into a computer running the music software that's relevant to the task. These programs and tools don't only make it possible for you to work faster; you can also get started sooner, since a large selection of software packages are available to download directly. You won't need to wait for shipping: just download and start working.

I’m getting a bad hum that almost goes away when I turn the volume up completely….gets loud as I turn it down. Someone rewired the guitar with 2 pair wire…..they attached a ground to the vol and tone pots everywhere the wires went….and also the body of the switch. I think it’s a bad ground loop problem….I’m going to change everything to single strand wire. I’m guessing there’s a voltage difference somewhere and it gets close to normal when I turn it all the way up on the volume pot.
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
Read Full Review Here is another superstrat design electric guitar on the list that is well recommended for a budding guitarist. While for veteran player’s out there who is on a hunt of buying an all around electric guitar on a minimum prescribe budget. The ESP LTD M-10 could be that affordable gem of a guitar you’ve been looking for and always wanted.
Kadence is an Indian manufacturer of musical instruments. They provide high-quality guitars at affordable prices. The wide range of guitars offered by Kadence starts from low-budget Frontier series of Acoustic guitars. The Slowhand series of premium Acoustic guitars having superior sound high quality finish. Kadence has become a favourite and one of the best guitar brands in the Indian market with its good quality products. The great look and feel and available at affordable prices make these guitars invaluable.
{"product":{"id":"H91419","stock":"","price":"999.99","name":"Artstar AS153 Semi-Hollow Electric Guitar","download":false,"sku_id":"","checksum":"637145126000","rep_id":"site51352403996001740095","displayId":"1352403996001740095","sku_rep_id":"","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Semi-Hollow and Hollow Body Electric Guitars","dept":"Guitars"}

One important thing to keep in mind about effects pedals is that the signal is doing a lot of work going through the complex electronics in them, and some effects play better as inputs for others. This all means that the order of your pedals does matter to some degree, depending on which effects are in the lineup. You can, of course, experiment to see how different orders affect the sound and that can be part of creating your own signature effects profile. But as a rule of thumb, here’s the basic order you should follow for your first foray into effects chaining:
It all began in California in 1946, when inventor Leo Fender decided he could improve on the hollow-bodied guitars that were popular at the time by introducing the world’s first production solid-bodied electric guitar. Arriving in 1951, the Telecaster soon became a commercial success, shortly followed by the release of the sleek Stratocaster in 1954.
Another important point I want to add here is - if you are on a budget, do take a look at models in higher price brackets. Why? The simple reason is, it will make you aware what a good guitar looks like. The expensive ones usually have better sound quality, better looks and it is more comfortable. It will help you grow along with the guitar. Always buy the higher priced guitar in the range that you can afford.
Even though Ibanez is thought of as a modern guitar brand, we have decades of accumulated knowledge and a history of pushing the boundaries. The AZ series carries with it all of the hallmarks of these tried and tested Ibanez qualities: the smooth oval neck grip, the well balanced asymmetrical body shape, and the neck heel allowing unrivaled playability.
The Fender Hot Rod Deluxe or its big brother the Deville come to mind. I have a hot Rod Deluxe tube mode 40 watts and it really pumps out the volume. The simple foot switch allows four settings from clean, mean, beyond mean and in your face. It really makes slide guitar sound like a male cat calling to a female in heat. Also, it can be mellow. I have seen many youtube videos with Eric Clapton playing a Tweed Model. I also own a Line 6 Duo Verb, Line 6 DT50, and of course and old US Made Peavey 5150 Eddie Van Halen Signature Model. The Peavey really pumps up the heat and the sustain is as wide as the Grand Canyon.
That’s not an overstatement, as traces of T-Bone’s influence can be heard in the early recordings of Albert, B.B. and Freddie King, Muddy Waters, and especially Chuck Berry, who adopted many of Walker’s signature licks as his own. A sharp-dressed, flamboyant performer who played the guitar behind his head and did the splits without missing a note, Walker helped reposition the guitar player from the sidelines to center stage, inspiring Buddy Guy, Jimi Hendrix and Stevie Ray Vaughan to copy his impossible-to-ignore moves.

By ’71, the Univox had expanded considerably with new copy guitars. Still around from earlier were the Hi Flyer Mosrite copy, the ‘Lectra violin bass, and the Mother or Rhythm and Blues Les Paul copy. Joining them were the Badazz guitar and bass, the Effie thinline, another Coily thinline guitar and bass, and the Naked and Precisely basses. Univox acoustics are also first sighted (as far as we know) in ’71.
The fretted instrument market is in many ways an excellent leading edge indicator of world economic conditions as a whole. China is not only rapidly advancing in the fretted instrument market but in all areas of manufacturing. Furniture factories in North Carolina are closing due to competition with imported Chinese products of equal quality for far less money. Numerous other industries are moving offshore. As you have all noticed the price of gasoline has risen dramatically in recent months. It should be noted that China now consumes approximately an equal amount of petroleum to Japan. This was certainly not the case five years ago. If OPEC and other producers pump the same amount of oil as they used to, but China emerges as a new player consuming this much fuel, it should come as no surprise that prices will go up. China now is a major importer of fuel, wood and agricultural products. Commodity prices in general are rapidly rising. China is not only becoming a world leader in manufacturing but it is becoming one of the world's leading consumers of all sorts of raw materials and commodities. While the per capita income in China and the per capita consumption of fuel is much lower than in the USA, their population is well over a billion people. At the rate they are going it will not be long before they consume fully as much fuel and other raw material as we do and have an economy which could rival the annual GNP of the USA. Not only are they an economic and manufacturing powerhouse, but they have a huge army. As their manufacturing capability increases not only quantitatively but qualitatively they become more and more of a super power. While the USA may have won the cold war with Russia, at the rate things are going as much as American consumers may benefit from inexpensive but high quality-guitars, furniture and other products from China, we may find ourselves in the uncomfortable position of no longer being the only world super power.
That is why pick-up manufacturers are always careful to explain that their pick-ups will sound different depending on the woods and construction of a guitar. Seymour Duncan (among many others) has written about this a lot, a you can read more on the Seymour Duncan website. You can also study more at the FRETS website, GAL (The Guild of American Luthiers), StewMac, and LMI (Luthier's Mercantile International).

{"product":{"id":"K47863","stock":"","price":"399.99","name":"California Redondo Player Acoustic-Electric Guitar","download":false,"sku_id":"","checksum":"368856727023","rep_id":"site51500000000140752","displayId":"1500000000140752","sku_rep_id":"","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
A bass amplifier or "bass amp" is a musical instrument electronic device that uses electrical power to make lower-pitched instruments such as the bass guitar or double bass loud enough to be heard by the performers and audience. Bass amps typically consist of a preamplifier, tone controls, a power amplifier and one or more loudspeakers ("drivers") in a cabinet. While bass amps share many features with the guitar amplifiers used for electric guitar, such as providing an amplifier with tone and volume controls and a carrying handle, they are distinct from other types of amplification systems, due to the particular challenges associated with low-frequency sound reproduction. This distinction affects the design of the loudspeakers, the size and design of the speaker cabinet and the design of the preamplifier and amplifier. Speaker cabinets for bass amps usually incorporate larger loudspeakers (e.g., 15" speakers are more common for bass than for electric guitar amps) or more speakers and larger cabinet sizes than those used for the amplification of other instruments. The loudspeakers themselves must also be sturdier to handle the higher power levels and they must be capable of reproducing very low pitches at high sound pressure levels.
These two are definitely the most similar sounding of the bunch and this poses a slight problem. While Steel String has more resonance in the low-end and covers fingerpicking, Songwriter is a little warmer/duller sounding but has twice the samples and round robins.  For me, this makes it hard to pick between the two, and while the tones are different, perhaps not quite enough.
The GrandMeister Deluxe refines the German firm's best-selling compact head, with four flexible channels and a host of built-in effects. Just about everything is MIDI-powered, so you can edit and store presets to your heart's content. The rear panel includes the latest Red Box recording output, and there's also a new improved iPad app that you can use to edit and store presets, either at the end of a lead or using a wireless MIDI adaptor. The GrandMeister Deluxe 40's four channels sound quite different from those of its predecessor: they're more balanced, with slightly less treble emphasis and a smoother but no less powerful bass response. There's plenty of headroom on the clean channel, which dovetails seamlessly with the higher-gain crunch channel. Both clean and crunch are very tweed-influenced, dominated by a warm midrange that's equally flattering to humbuckers and single coils, especially when boosted and laced with a little of the GrandMeister's digital reverb, which can be combined to taste with delay, chorus, flanger, phaser or tremolo. The two American-voiced lead channels have all the gain you could possibly need for almost any musical genre, from classic rock to modern drop-tuned metal, with a nicely sculpted top-end that squeals and snarls on demand. As a do-it-all tool the GrandMeister 40 takes some beating. All of its many features work efficiently and it's hard to point the finger at shortcomings, because there really aren't any.
Originally the Stratocaster was offered in a 2-color sunburst finish on a solid, deeply contoured ash body, a 21-fret one-piece maple neck with black dot inlays and Kluson tuning heads. In 1956 Fender began issuing solid Stratocasters with alder bodies.[4] In 1960 the available custom colors were standardized, many of which were automobile lacquer colors from DuPont available at an additional 5% cost. The unique single-ply, 8-screw hole white pickguard held all electronic components except the recessed jack plate—facilitating easy assembly. Despite many subsequent Stratocaster models (including copies and the Superstrat), vintage Fender models are highly valued by collectors for their investment potential and players who prefer the timbre of older models.
This site is for information only - we don't sell vintage guitars - but do check out our Vintage guitar collectors pick list: a regularly updated selection of rare guitars, vintage catalogs, or unusual items currently that we've found for sale on the web. We especially like to feature Vintage guitars with a story! If you're selling something interesting yourself, get in contact and we can help promote your item.
Though, it is important to know that diving into the world of building your own guitar pedals requires a vast amount of knowledge. A person who builds DIY guitar pedals should have a rather keen understanding to circuit board electronics, because this will allow them to understand how exactly to put a guitar pedal together, as well as troubleshooting.
CAUTION: If you find that the truss rod is very difficult to turn, then stop now and take your guitar to the guitar shop. It may be that there is a problem with the neck or the truss rod and you may damage the guitar by forcing it. Believe me, you do not want to damage the truss rod. If, instead of tightening the truss rod, you need to loosen it, do so by turning it anti-clockwise (counter-clockwise). Again, a quarter turn at a time. Once you have got the gap to 0.012” (or whatever gap you prefer), you will have finished this step. Feel free to remove the capo at this stage if it is attached.  
{ "thumbImageID": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst/J32680000003000", "defaultDisplayName": "Fender American Elite Jazz Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000005995", "price": "2,149.99", "regularPrice": "2,149.99", "msrpPrice": "2,150.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst-1500000005995.gc", "skuImageId": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst/J32680000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000005994", "price": "2,149.99", "regularPrice": "2,149.99", "msrpPrice": "2,150.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Natural-1500000005994.gc", "skuImageId": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Natural/J32680000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Stewart MacDonnald has a great finishing schedule that I would recomend reading before you start the painting process. You shouldn't need to fill any pores on the neck because necks are usualy made from maple which is a tight grain wood. All that's need for it is a sanding with 220 grit paper unless you want to leave the neck natural and unfinished. I recomend using at least a few coats of sanding sealer of clear gloss laquer to protect the wood fromdirt and grime that comes from playing.
GuitarFella reviewed the Bullet Strat, and despite a few minor complaints concluded, “It was supposed to be the ultimate beginner guitar. Seeing what kind of impact it has now, it’s fair to say that Squier succeeded.” AudioRumble said it “pretty much sets the standard for all other budget guitars.” The last time we checked, its Amazon average rating was only 4.0 out of 5 stars in 14 reviews, but the only specific complaints were about apparent damage in shipping.
The output transformer sits between the power valves and the speaker, serving to match impedance. When a transformer's ferromagnetic core becomes electromagnetically saturated a loss of inductance takes place, since the back E.M.F. is reliant on a change in flux in the core. As the core reaches saturation,the flux levels off and cannot increase any further. With no change in flux there is no back E.M.F. and hence no reflected impedance. The transformer and valve combination then generate large 3rd order harmonics. So long as the core does not go into saturation, the valves will clip naturally as they drop the available voltage across them. In single ended systems the output harmonics will be largely even ordered due to the valve's relatively non linear characteristics at large signal swings. This is only true however if the magnetic core does NOT saturate.[45]
I love them both, have a Strat and Les Paul. they are such different animals. Each has it’s place in my music, each has a special sound. Used to own a Tele which I just didn’t enjoy playing so much, so traded in for the Les Paul. I later bought a modified Tele with humbuckers (I know it’s a sin) but damn it sounds so good, for heavy power chords, more like a PRS sound. I’ve been playing 27 years now and am a composer / songwriter. Played in lots of bands, and during my live work I have to say I prefer my Strat. It’s lighter than the Gibson, and contours nicely to my body. With a good valve amp and the right strings I can get some lovely fat sounds out of it. I use the Gibson mostly in the studio. When I moved countries, I needed a cheap electric to tide me over until my stuff got sent over. I picked up a $100 Mitchel (Made in China). The setup was awful, totally unplayable, so set it up properly, and to be honest it plays like a dream. The neck is amazing for a $100 guitar, and with some new pickups the sound is great too. The upshot here is that it doesn’t really matter what guitar you use to make music on, as long as you enjoy the instrument, a cheap guitar can go a long way. I find the discussions about which is better kind of like guys comparing their crown jewels, it’s purely academic and what matters is how you use the thing 😉
The early Silvertone electric guitars were made by Harmony and Danelectro, with a few exceptions. Danelectro had been making amplifiers since the 1940's for Sears, Epiphone and it's own brand. Their manufacturing facility was in Neptune New Jersey. The Dano's started mainly with the infamous "U" series which had the Lipstick pickups and "Coke-bottle" headstocks. Jimmy Page, Jimi Hendrix and many other rock stars got started and continue to play the Dano's. Aside from the very first Danelectros for Sears they all had the Lipstick pickups. That's how you can tell a Dano from the other manufacturers. Danelectro also manufactured the infamous "amp-in-case" models of which I have two examples: a 1964 and a 1968. If you want more info on Dano's go here.
The Kay Gold Line professional series became synonymous with that rich gutsy Blues/Jazz sound that eventually became rock. This unique blues sound was not available from any other guitar of that time. For the past decade vintage Kay instruments have been fetching high prices and have had increasing interest from collectors and players because of the cool, campy look and that unique Blues/Jazz sound.

PRS is an American guitar company founded by luthier Paul Reed Smith in 1985. It makes some of the finest high-end electric guitars and custom shop instruments. It was extremely popular in the '90s and eventually spread to Asia, where they started the SE lineup that was more affordable and budget-friendly. However, they are not meant for beginners even though they cost less. They are used by musicians and players of all kinds of genres. The high-end models are classy and can be somewhat expensive.
If you want free and private, other than the basic version of Eagle, there is KiCad, which is an open source tool developed by GIPSA Lab, which is a research institute out of Grenoble in France. Like Eagle, there are Windows, Mac, and Linux versions, whereas Circuit Maker is Windows only. There are also tools now being offered for free by some of the big component dealers such as Mouser.
Fujigen went on to achieve lasting fame as the manufacturer of Greco guitars in the ‘70s and Fender Japan in the ‘80s and early ‘90s. But Fujigen’s work in the ‘60s is our focus. The Fujigen hardware is the easiest way to tell these guitars apart from Teiscos. For example, Fujigen embossed "mic 1" and "mic 2" into their metal control plates, while Teisco did not. This is just one example, but it requires a bit of reading and studying about the nuances of that hardware to positively identify the Fujigens for what they are.
In August ’68, Ovation added three more models – the Hurricane 12-string and the Typhoon I and II basses, all with chrome hardware. The K-1120 Hurricane was a Tornado with the extra strings, advertised as offering a “harpsichordian” effect. This lasted only a year and was gone by ’69. The initial Typhoon basses had slightly smaller bodies than the guitars, with stubbier, more flared horns. These lasted only a year until ’69, when the body styling changed to that of the Gibson-style guitars. The K-1140 Typhoon I bass had one Schaller pickup and a covered bridge/tailpiece assembly. The K-1240 Typhoon II was a two-pickup model with a three-way select. This was also called the Williwaw (“mountain wind”) in some Ovation literature, but it was never really called that. The Typhoon I was only available in the stubby body and was discontinued in ’69. The Typhoon II changed model number in March ’70, becoming the K-1222. This model made it until June ’72.

For guitarists who must have original-era Strat® sound, look and feel, the Classic Series '60s Stratocaster Lacquer epitomizes the instrument during its second decade, when musicians used it to conjure and create electrifying sounds never before imagined or experienced. With authentic features including a nitrocellulose lacquer finish in classic Fiesta Red, everything about it takes you back to a wildly creative time when rock music came into its own—from surf to psychedelia and more—and players started to discover in earnest just what a phenomenal instrument the Stratocaster really was.
In this era, as well, Gibson began experimenting with new models such as the Les Paul Recording. This model is generally unpopular with guitarists due to its complex electronics. The Recording featured low-impedance pickups, many switches and buttons, and a highly specialized cable for impedance-matching to the amplifier. Less noticeable changes included, but were not limited to, maple fingerboards (1976), pickup cavity shielding, and the crossover of the ABR1 Tune-o-matic bridge into the modern day Nashville Tune-o-matic bridge. During the 1970s, the Les Paul body shape was incorporated into other Gibson models, including the S-1, the Sonex, the L6-S, and other models that did not follow the classic Les Paul layout.

The first thing that you’ll notice is that the PR5-E is a florentine style guitar, which means that it has that fantastic looking cutaway with a really dramatic horn. This gives you nice access to the upper frets while retaining some resonance. The result is some really nice tone for such an affordable guitar. What’s more is that it’s a slimline design. It is an incredible sounding instrument.
The Alvarez AG75CE is on the upper range of $500 acoustic guitars. This particular model is a cedar top with rosewood back and sides. It also features scalloped and forward shifted bracing which makes for a bigger sound. Owners of this guitar are posting rave reviews citing it’s quality of build and great tone. The cutaway is a nice feature for those that want to reach the upper register of the guitar, and it looks cool too! It is a grand auditorium body, which does not quite have the bass of a dreadnought but offers a more balanced sound. Great for singing along. This guitar is a great choice for intermediate players looking to not break the bank.Check it out here.
Sennheiser's cardioid MD421 crops up almost as frequently in interviews, and has a wider frequency response, none of the low mid-range suckout, and an even heftier sensitivity boost upwards of 1kHz. This microphone also has a larger diaphragm than the SM57, and the off-axis response anomalies of the larger diaphragm, in particular, give a different character to the sound. Although obviously very popular, this mic seems more often to be used in combination with other mics than on its own.
There’s no disguising what the Jackson Pro Series DK2 Okoume is meant for: shredding. From the tonewoods to the construction to the feature set, everything on this guitar is designed to bring the best out of lightning-speed solos and other fretboard pyrotechnics. That it clocks in at under $900 off the rack makes the Pro Series DK2 a great value buy.
The best ones are the ones that sound good to YOU and inspire YOU to play better, no matter how old they are, what’s in them or how many features they do or don't have. It follows that there are thousands of possible “best” amps from any number of brands, from old to brand new, that can fit this description. You just have to find the right one that fits your particular needs. Brand names don't matter so much as features here, so that’s why I'm not going to mention them specifically.
Conceived in the early 1930s, the electric guitar became a necessity as jazz musicians sought to amplify their sound to be heard over loud big bands. When guitarists in big bands only had acoustic guitars, all they could do was play chords; they could not play solos because the acoustic guitar is not a loud instrument. Once guitarists switched from acoustic guitar to semi-acoustic guitar and began using guitar amplifiers, it made the guitar much easier to hear, which enabled guitarists to play guitar solos. Jazz guitar had an important influence on jazz in the beginning of the twentieth century. Although the earliest guitars used in jazz were acoustic and acoustic guitars are still sometimes used in jazz, most jazz guitarists since the 1940s have performed on an electrically amplified guitar or electric guitar.

I am struggling with the same issues trying to wrap my head around the benifits of constructing my neck through in this fashion . It would appear most of the big dog builders subscribe to this theory though I don't really know why. I read in a post in this forum that it started with a mistake by luthier Carl Thompson when he cut the channel too deep for the neck and was later copied by Ken Smith ,and then Fodera.

During the first three decades of the 20th century, with the rising popularity of Hawaiian and big band music in America, guitar makers built larger-bodied instruments, using steel instead of gut strings, and metal instead of wood for the guitar body. Around 1925, John Dopyera designed a guitar with metal resonating cones built into the top that amplified the instrument’s sound. That suited twangy Hawaiian and blues music but not other genres. Then, in the 1920s, innovations in microphones and speakers, radio broadcasting, and the infant recording industry made electronic amplification for guitars possible. The volume was suddenly able to go up: way up.
The first Touch Guitar Invention started in 1959 with the filing of patent #2,989,884 issued in 1961 as the first touch tapping instrument which could be played on two separated necks Simultaneously by muting the strings at the distal end of the neck along with numerous other claims. Until 1974 it was known as the DuoLectar and with a new patent "the "Electronic Mute" has been known as the "Touch Guitar. It is held in the normal way over the shoulder and design with the left hand playing the lower bass neck in a traditional way and the right hand playing over the top on a neck which has a wider string spacing allowing the hand to be used in both vertical and horizontal angels to the strings. It is absolutely off at all times, until Touched or picked.

No doubt many of you thought that the very first electric guitar was Les Paul’s legendary “Log.” Well, regardless of who was responsible for its invention and evolution, electric guitarists throughout the world are truly grateful for the ability to amplify their instruments, as are their audiences. This capability to connect to dedicated guitar amps along with the use of distortion and guitar effects has spawned entirely new genres of music. Pickup types and configurations, as well as specialized switching options and tone controls also help generate different sounds. But when you break it down to the basics, there are really only three types of electric guitars in existence to this day, excluding acoustic-electrics - the aforementioned Hollow Body, Semi-Hollow Body, and Solid Body varieties.
ESP is a Japanese company, which focused on the production of electric guitars and basses. This brand was established in 1975 in Tokyo. They produce instruments under the label of “ESP Custom Shop”, “Navigator”, “Grassroots”, “ESP Standard”, “LTD Guitars and Basses”, “Edwards Guitar and Basses” etc. Available price is Rs. 9,270/- onwards (approx). For more information, visit (Global) or (Japan).

Why do these genres not require the use of a tone knob, or sometimes, require a tone knob to be fully open? Well, for metal and hard rock, first of all, most of the tone shaping happens on the amp and/or on the pedals, especially for those who use high gain distortion pedals. The pickups on typical hard rock and metal guitars are humbuckers, which are warmer and have less treble. Couple that with high gain and high output pickups which compress the signal and also take some of the treble away, and keeping the tone knob open becomes that much important so that the tone will not be muddy and keep its cut and punch. For country, well, I guess that’s just *the* sound of the genre, and wide open Telecasters and Stratocasters are the weapons of choice.
Yamaha F-310 Acoustic Dreadnought guitar in very good-excellent used condition no cracks or issues it looks great and the neck angle is excellent as well so as a result this guitar plays well with good fingerboard action with plenty of room on the saddle to lower action even more in future years if ever needed. Frets look good at 90-% with no ruts on fingerboard noted, truss rod is working fine, nut is 1-11/16ths. Yamaha specs (all of the F310 are made like this). It has 20 frets and a slim taper neck,The top is spruce, laminated, with natural finish. The sides and back are made of Meranti Indonesian Mahogany type wood , fingerboard and bridge are made Indian Rosewood, and the neck is of Nato. It's a full dreadnought guitar style, and just looks great.this one is in exceptional used condition better than average. Sound is good with nice volume and its tone is getting mature,,nice tone. No Cracks no issues no repairs and looks to have a bone nut and saddle this helps it have such a mature natural tone, Its sounds better than other F310’s Ive played I like this guitar and its price is right. any questions or to buy this guitar contact Joe at: .
Ibanez is the pioneer to launch the first 7-stringed guitar. They are the creators of the 7-stringed instrument in 1990 with the collaboration universe. Most Ibanez guitars come with a full-size frigate shape having a top of laminated select dapper. Ibanez guitars have mahogany neck, back, and sides, along with 20 frets on a rosewood fretboard. The Ibanez-branded headstock came with attractive quality and closed chrome die-cast tuners. These all features make the Ibanez guitars suitable for every kind of style and genre of music. However, heavy music is mainly the field where metal crowd flock and let the Ibanez guitars unbeatable.
Yes...I've seen a VST guitar plugin (can't remember the name) where you play chords on the keyboard with the left hand and the software converts them into guitar chord voicings, then you "strum" with the right hand by hitting different keys....and each key does something different...up-strum, down-strum, rake, mute, etc. I actually thought it sounded pretty damn good considering. Definitely close enough for background rhythm guitar work.
Tone shaping possibilities of overtone and spacious ambiance of Tera Echo is now versatile, thanks to the Boss’ flagship multi dimensional processing technology. Apart from those vintage options, the updated COSM preamps in this pedalboard include new additions like crunch and metal (for Metal Style players - see our review on the best Noise Gate pedals).
The first design was an Early Telecaster model, called Squier, with a single mic. The main contribution Leo Fender did, was the bode and neck removal separetly. In previous models, when the guitar need repairs, the complete instrument needed to be sent, while, after Leo fender design, the plate could be unscrew and sent to the shop only the damaged part.

Chushin is still in operation today in Nagano, Japan and does business with guitar giant Fender. I believe that Chushin may have been a member of the Matsumoto Musical Instruments Association listed further down because both companies produced Fresher guitars during different periods....with Matsumoto beginning production and Chushin ending it (perhaps because the Association was disbanded?). During the 1960-1980 period they were responsible for badges Bambu, Cobran, El Maya and Hisonus as well as some Charvel, Fresher and Jackson badges. The company may have possibly made some guitars with the Aztec, Maya and Robin badges, but that is not verified. Guitars made by Chushin from this period are well-made and appreciated by guitar enthusiasts worldwide.

AmpliTube Free is a cool entry level program for those that want to experience software based guitar effects and amp modeling without spending money. It only comes with 9 stompbox and 2 rack type effects, but it covers essential effect types which are good enough for various musical genre applications. Should you need more, AmpliTube offers an upgrade system in which you can shop for additional amps, cabinets, mics and effects. Each model can even be tried out for free for two days prior to purchase, quite impressive for a free software!
Gibson guitars are usually equipped with dual-coil pickups. They have a higher output level than single-coil pickups and produce a fatter sound, which is usually an advantage for distortion, but not only! Gibson has many other successful models, like the Explorer (The Edge), the Flying V (Jimi Hendrix) or the ES-335 (B.B. King). Epiphone, founded in 1915, was bought by Gibson in 1957 and became Gibson's sub-brand, even if a few custom designs of the 1960's are still mythical (Casino).
Some effects, such as flanger, wah-wah, and delay, are obvious to the ear. But others, such as compression, reverb, and even distortion, are core elements of your tone, so you might not always notice these as “effects.” But used artfully, or sometimes even just correctly, they can take you to tonal utopia. Even if your personal style doesn’t call for mind-altering sound, you can still improve your sound by using effects.
Paint chips and cracked binding: Common on older instruments. Over time these openings will collect sweat, polish, and dirt, causing discoloration, lifting of the edges, and further deterioration. It is best to clean these spots w/ naptha (lighter fluid)or alchohol, remove any loose edges around the chips before cleaning (they will be holding polish and grime preventing the glue from working), then seal the chips and cracks with thin superglue. Super glue can be heated in the microwave for a few seconds (plastic bottles) to make it flow better. Drop Filling is a technique for filling chips with paint. This is covered at the ReRanch site.

Judging by many of my last few years guitar purchases (on Ebay and elsewhere), I’m the kind of a person who seems to think he’s the kind of a person who likes guitars with a lot of knobs and switches. I’ve bought several multi-pickup guitars. Old ones, new ones, new ones made to look like old ones (not those stupid “relic-ed” ones, though…I’m an idiot, but I’m not stupid). Yet, as I look at the keepers in my collection, I’ve only kept one guitar with more than four knobs, and none with more than two pickups. Odd.
Modern electric guitars most commonly have two or three magnetic pickups. Identical pickups produce different tones depending on location between the neck and bridge. Bridge pickups produce a bright or trebly timbre, and neck pickups are warmer[when defined as?] or more bassy. The type of pickup also affects tone. Dual-coil pickups sound warm, thick, perhaps even muddy[citation needed]; single-coil pickups sound clear, bright, perhaps even biting[citation needed].