Neck Construction – The neck part of the guitar includes the fretboard and headstock. The tuners are mounted on this part of the guitar. The width and profile of the neck affects the playability of the guitar. Most necks are either “C” or “U” shaped. In most cases, the fretboard is made from a thin layer of rosewood or ebony, but some guitars have maple necks. Fretboard have position dots and other inlaid markers that assist the player. There are generally 3 types of necks – bolt on, set neck and neck through.
Taylor has swiftly made several electric guitars that made their way to the hands of professional guitarists onstage. Moreover, a few of their models are directed towards working players too. In fact, Taylor seems to be caring about the beginners and intermediate level players as well, since they produce several guitar models aimed at these customer groups. If you are ready to scour out your wallet to get your desired guitar, Taylor will be the perfect choice for you.
Giannini guitars were (and are) made by the Tranquilo Giannini S.A. factory, Carlos Weber 124, Sao Paolo, Brazil. They are generally known for being well-made instruments featuring very fancy Brazilian hardwood veneers, as well as for the strange-shaped asymmetrical CraViola models. Probably the most famous, indeed, perhaps only famous, endorser of Giannini guitars was José Feliciano. No reference materials were available on the early Giannini guitars. A catalog from 1971 is available, with a snapshot of the line that probably goes back at least a decade, and certainly forward.
The Effect: Even though acoustic electric guitars are generally not associated with various guitar effects, using some can be very beneficial to your tone. Naturally, the types of effects you are going to use will differ from those used with electric guitars quite a bit. The most common accessory in an average acoustic electric signal chain is a preamp pedal. Something like LR Baggs Venue DI is a perfect example. This preamp allows you to boost the signal being fed into the amp or PA, but more importantly, shape it in a way that enhances your tone. Aside from preamps, many guitar players like to use various modulation effects, delays, reverbs and similar. General consensus is that overdrives and distortions are not something you would want to hook up to your signal chain. If you are frequently performing on stage, having even a simple effects chain can be a real game changer.
The Korg Kaoss Pad is a small touchpad MIDI controller, sampler, and effects processor for audio and musical instruments, made by Korg. The Kaoss Pad's touchpad can be used to control its internal effects engine, which can be applied to a line-in signal or to samples recorded from the line-in. Effects types include pitch shifting, distortion, filtering, wah-wah, tremolo, flanging, delay, reverberation, auto-panning, gating, phasing, and ring modulation. The Kaoss Pad can also be used as a MIDI controller.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: left handed electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
Scratch and Dent - Demo Model full size electric guitar from Davison is the perfect way to start playing at an affordable price with features you'd normally expect on a much more expensive instrument. With a built-in humbucker pickup for that "rock" sound, you can plug this guitar into any amplifier or software system. It has a high gloss finished body and a contoured body for ultimate play-ability. Perfect for the aspiring guitar player of any age, this Davison is also Teacher Approved.
Now that we mentioned some of the exotics, it’s time to go back to the roots. Epiphone Les Paul Standard is as old school as it gets. Legendary LP body style that brings a no-nonsense combo of hardware has always been the way to go. I actually have one of these, and after years of playing it keeps surprising me. I’d say it easily punches way above its price range.
Later makes of fuzzes—and later generations of those above—moved on to silicon transistors. Many players found the silicon-based models a little harsher sounding, however, and the legend of the magical germanium transistors began to grow. Even so, plenty of guitarists get along just fine with the silicon variety. Eric Johnson, often credited with ears of canine keenness, has used a silicon-transistor Dallas-Arbiter Fuzz Face to drive the dirty rhythm of his famous multi-amped, multi-routed set-up. He also holds the unit together with a rubber band because he says the bottom plate’s central mounting screw affects its tone. Make of this what you will.
Here are our choices for the five best YouTube channels. We made sure they all have plenty of content for novice players, but you’ll find lots of videos for advanced musicians, too. Some of them are hosted by people who are simply passionate about playing guitar and want to share that passion without trying to make a million bucks out of you. Don’t forget to show them support.
The Ibanez Artcore AF75, PRS SE Standard 24 and Schecter PT, for example, are priced below $600 and have been highly rated. They’re not exactly cheap money-wise, but they’re definitely worth a lot more. Getting one of those from the get-go will make playing guitar a lifetime passion. “Cheap” guitars may seem more affordable at first, but many of these are poorly made and can be more costly in the long run because of constant repairs and replacements.
If your interests are on the jazz side of things, the Ibanez Artcore series is worth a close look. These economical hollow-body guitars are perfect for players at any level who want a well-crafted instrument that won't break the bank. They come with a well-deserved reputation for solid stone and sustain and they hold tuning reliably, making the Artcore guitars a good choice to get the most bang for your buck.
In addition to the alignment problem, there are other problems with using a simple text editor. For example, you'll have to align all the notes of a chord yourself... it's not easy to insert a new passage... if you make a mistake you can't just move the note... and to your system, it's just another text file. If you want to programmatic help to simplify your work, or if you want extra power (such as song playback, chord charts, and scale generation): use a TAB program.
Here we have a great mid - late 1970’s Alvarez 5047 model its kind of rare and seldom seen and she is a wonderful example of Japan’s answer to the Martin 00028 with the Herringbone rosette and rosewood body and in this case they used a wonderfully high grade beautifully grained rosewood for its body back and sides and fingerboard and bridge at that it looks to be a rich looking Jacaranda Brazilian rosewood type you can be the judge of that just have a good look at our pictures, at any rate its workmanship is excellent as is its fit and finish work is all of a high grade. Well balanced sound board with good volume and a sweet tone with its gorgeously straight grained solid spruce top is beautiful and easy on the eyes as well and up close you can tell its genuine vintage with its thin skin finish its grain highs and lows are visible the Japanese truly were masters - experts at thin poly finish and this one has it. This is the famous S.L.M. model it was imported by Saint Lewis Music back in the Lawsuit era days the 1970's these were made especially nice for SLM as seen here. Bindings all round are excellent overall condition is JVGuitars rated at very good its not new of course its over 40 years old it has only minimal insignificant scratches or doinks true vintage in its own right yet - excellent used vintage and is considered above average for a played 40+ year old instrument. No cracks no buldges or warpage anywhere this guitar is straight no repairs and all original and was excellent when we took this in on trade.We simply cleaned - oiled and polished the entire guitar and it has a good set of Martin 80/20 phosphorous bronze strings set of 12’s… this guitar plays very well now with excellent string action, its neck is a really great one RARE for the Japanese with its more meaty V profile much like the old Martin. Condition, condition, condition, Easy on the eyes and that vintage tone and fun to play are 6 darn good reasons to own this ALVAREZ 5047 Japanese Vintage 0029 with that gorgeous rosewood… Any questions ask Joe at:
Volume pots don’t attenuate all frequencies consistently. Treble gets attenuated faster which results in treble loss when volume is rolled down. Treble bleed circuits (or bright caps) are there to compensate for treble loss and make guitar sound at lower volume as close as possible to sound with volume maxed. There are several different treble bleed circuits used or recommended by guitar/pickup manufacturers. What’s common between them is that they are installed across guitar volume pot (input and output lug).

To finish, here's one damn good last trick: doubling an electric guitar with... anything else. I know that's pretty vague but I must say that I had a hard time putting it any other way. The goal is to listen to your guitar sound and analyze it to find out what it lacks. Then you "only" need to find a sound that can fill this "hole." For instance, a friend of mine once told me he doubled a crunchy guitar sound with a sample of a lightbulb being rubbed on his boot with the goal of emphasizing the strumming sensation. Much less arcane, there's the famous example of the particularly "fat" riff on Radiohead's Airbag. If you listen to the intro, you can hear that the riff is being doubled with a cello, which obviously adds a lot of the breadth to the sound, as I'm sure you'll agree. I would love to keep on giving you more ideas in this regard, but the scope of this method is so wide and open that the only thing I can tell you is to let your imagination fly, experiment and have fun!

Before you start thinking your pickups can kill you, bear in mind this is a very small signal (2 volts) that requires amplification (this is where your aptly named guitar ‘amplifier’ comes into play). To put things in perspective, the little rectangle shaped batteries (D) found in distortion pedals are 9 volts…as mentioned it’s a very small signal.
Del Rey, of course, is Spanish for “of the king,” which explains the crown. This was no doubt added to the Teisco name, in part, to suggest quality. However, it was also a way to add the de rigeur Spanish cachet necessary for “Spanish” guitars of the time. It was convention that “Spanish” guitars carried Spanish names, except for the well-known brand names – Gibson, Fender, Martin or Kay; thus the plethora of imported guitars named Greco, Ibanez, Goya and Espa�a. Of course, none of these were made in Spain, but rather in Japan, Japan, Sweden and Finland, respectively!

Taylors have a "happier" sound and I like the feel of them. I am a novice but from what I have seen for a beginner with an acoustic guitar, they felt and sounded warmer and less tinny than the laminated wood ones. A good rosewood taylor isn't on the cheap side of things but it feels like you can play better than you can. And the model I looked at had strings that were nice and close to the frets so you didn't feel like you were pushing in deep like the keys of an old typerwriter. Go into a Guitar Center or somewhere you can actually feel what you are getting before you buy anything. I got a cheap Gibson online less than a month ago and got what I paid for when it came with the bridge completely missing and a brassy sound when it was played. Buy your stuff in person. I think that Gibson is probably still a good brand, but the quality control of the cheaper models they put their name on is something I might question from my first experience with them...

Built-in mics aren’t necessarily the budget option as they can be seen on some high-end guitars. They’re extremely helpful when you need volume but not so much where the acoustics of your setting, say in a concert hall, carries sound projection for you. However, the internal mic can raise problems for the performer as they’re prone to producing unwanted feedback. Multi-blend pickup and preamp systems allow you the flexibility to switching out from the mic when it proves to be problematic. However, if you’re going to install one yourself, look for one with a high feedback resistance of exceptional quality.
Maton was founded in 1946 as the Maton Musical Instruments Company by Bill May and his brother Reg. Reg was a wood machinist, and Bill a jazz musician, woodwork teacher andluthier who had for some years operated a custom guitar building and repair business under the name Maton Stringed Instruments and Repairs. The name “Maton” came from the words “May Tone” and is pronounced May Tonne.
In 1933, Dobro released an electric guitar and amp package. The combo amp had "two 8″ Lansing speakers and a five-tube chassis. Dobro made a two speaker combo amp that was on the market over 12 years before Fender launched its two-speaker "Dual Professional/Super" combo amp. In 1933, Audio-Vox was founded by Paul Tutmarc, the inventor of the first electric bass (Tutmarc's instrument did not achieve market success until Leo Fender's launched the Precision Bass). In 1933, Vega sold a pickup and amplifier set for musicians to use with existing guitars.
{"pageName":"[gc] pdp: old kraftsman 196s k3 solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113469598;;;;evar65=Vintage-Guitars-Old Kraftsman","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
the product took a while to arrive which i was ok with they let u know ahead of time….however the only instructions is a poorly photocopied over view of the board and a few details of other items…nowhere is the wiring schematic… they give you a foot long one color wire not the 3 color connected wire they show here on amazon… kinda bummed on unfinished instructions…. disappointed with the single color wire i mean the foot switch has 9 openings where are the instructions for that? actually while writing this review i down graded it to a 1 star… i was getting more upset with the lack of instructions….
Ken Rosser picked the Spider Classic 15 as his favorite of the amps we tested, saying, “I think the effects on the Line 6 sounded the best. It gives you a nice range of tone options. The clean tones stay clean even at loud volume, which a lot of these can’t do. One caveat is that, when you switch the amp sound, it changes the way all the knobs work, so the sounds can really jump out at you.” Fred Sokolow liked the Line 6 in general, saying, “I could pretty much figure out what to do with it, but I could figure out the Fender more easily.”
Another famous guitar shape, although we’d wager on account of it being many players’ ‘first’ guitar. We’ve all seen them. The nylon-strung small scale acoustics which many of us gain access to at an early age. The, as you progress, you learn that these particular guitars aren’t sent to test our commitment to the cause, but that in the right hands these can be amazingly intricate, highly technical instruments which have a wonderful sound and genre all of their own.
Anyone who has a Tempest XII probably needs a pick guard. I have a 1966 which was in the case for much of the past forty years. The plastic apparently dried out and "shrunk," causing the two corners to pop off at the screws near the neck. Some guitar repair technicians are good at fabricating pick guards, but most are either woodcrafters or electronics geeks. Please advise how your search has gone. Maybe I'll replace mine, too. RED

Here you will find a list of beginner guitar chords. These chords are very commonly used through many popular songs and so learning them is a great foundation for your guitar future. With the chords below you will be able to play thousands of songs, including most of your favourites. And once you have learnt these chords and the changes between them you will find it very easy to learn new chords and add them to your repertoire.
ATTACHING AND DRILLING THE NECK For this you will want to use a clamp to hold the neck firmly in place while you dril the holes. Attach the neck to the body and clamp it lightly so you can set it in the right possition before drilling. Make sure you have some protection between the clamp and the body so you don't leave any indentions in the wood. A soft piece of plastic or a soft rag will work nicely. Use a long ruler to allign the neck to the position of the bridge. Do this on both sides of the neck to see that you get it centered. Tighten down the clamp a bit more until the neck doesn't move. Drill the holes as straight as possible with a smaller bit that you used on the body. If you can't reach all of the spots that you need to drill at because the clamp is in the way, take a couple of the furreles and neck screws and screw them into the neck. Once you have done this you can finish drilling the other holes with out the clamp.
Introduced in the late '90s, the PRS SE line was the company's entry into the already tough entry level market competition. With it, one can own a PRS guitar at a much lower price point, with the main difference being the country of origin, which for the case of the SE is Korea. The SE Standard line takes affordability a step further by having the production done in Indonesia, while still maintaining high quality standards.

Electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. Every electric guitar player needs an amplifier because most electric guitars are barely audible without one. You’ll need one to play with other musicians, which is one of the most important ways to develop your musical skills. Because the amp is as important to a guitarist’s sound as the guitar, most teachers consider it essential to use an amp at least part of the time when you’re practicing. You can’t develop your own sound without spending some time experimenting with the controls on your amp and guitar.
Loop-based guitar plugins are slowly moving to the point of obscurity as virtual instrument technology is getting to the point where even string instruments can sound out-of-this-world good and blossom with character. But there still exists some gems out there such as Acoustic Revolutions, which updated to volume two as recently as 2015, doubling the number of loops.
First of all, let’s clear up some minor confusion over the name. It has been variously reported, including by me, that the name “Teisco” stands for the name of a company in Tokyo; however this is not the case. Teisco was simply the name chosen by one of the company’s founders, Mr. Atswo Kaneko. There was another prominent company called the Tokyo Sound Co., Ltd. which was responsible for making Guyatone guitars, another major early Japanese brand, some of which came to the United States as Kent guitars imported by New York’s Bugeleisen & Jacobson and others. However, neither of these companies or their guitars had anything to do with the Teisco brand.
CALIFORNIA PLAYER models express unique personal style with bold looks and inspiring sound. The satin finish mahogany neck features an easy-to-play, slim-taper “C”-shaped profile suitable for any playing style. When it’s time to plug in, solid-top California Player models also feature a Fishman pickup/preamp system for incredible amplified performance with pure, rich and resonant tone.
There are also companies like Eastwood Guitars that are releasing their own versions of the Hi-Flier. Available for a pretty low sum, you can get Eastwood’s recreation of a Phase 4 Hi-Flier in both right-handed and lefty configurations. If you don’t find the world of vintage guitars too appealing, but you dig the look and feel of the Hi-Flier, this might be a prime option for you.
So the actual vibrating length of the string should be the same in all cases, and if that's all that affects the magnetic field then none of the other things mentioned above should affect that signal. Do a simple test protocol such as plucking each string with the identical pick, record the waveform, overlay them and look for differences in the waveform.
The previous drawing illustrates the electrical and magnetic function of a single-coil pickup. Some pickups might use six permanent magnets in place of the six pole pieces to create the magnetic field, but the idea is the same: create a steady magnetic field around a coil in proximity to the guitar string. The name "single-coil" pickup becomes more significant when compared to the humbucker or "dual-coil" pickup.
There is a beauty to the guitar-cable-amp approach. It doesn’t get any easier, unless you take up playing the flute. And the lack of toys to mess with will certainly make you focus on playing more. By changing your pick attack, vibrato, or the volume and tone controls on your guitar—you’ll rely on your hands instead of stepping on a box to change tones. I believe it’s beneficial for all of us to just plug straight in at least once in awhile and rock out with unadulterated tone.
The guitar is built of full, all-solid maple that gives a nice clean tone and helps to avert some of the feedback prone to other fully hollow guitars. There’s a mahogany set neck to both help with longer sustain and to give you the premium fit and finish usually reserved for more expensive hollow-body instruments. The two ACH-ST humbuckers aren’t ultra-heavy metal pickups, so you won’t get a ton of snarling distortion out of the AF55, but you can push an overdrive sound to the next level if you want to. It all adds up to a sound that’s perfect for a player who’s looking to go for the jazz/blues vibe, or someone who’s looking to go for a singer/songwriter roots project. The trapezoid tailpiece also gives you a nice nod to vintage axes, too.
{"id": "361091", "categoryId":"site5LRABAA", "name":"Vintage Leather Guitar Strap", "pageUrl":"/El-Dorado/Vintage-Leather-Guitar-Strap.gc", "thumbnailUrl":"", "hasFeatures":"1", "isAccessory":"1", "message":"", "value":"85.00", "priceMin":"85.00", "priceMax":"85.00", "msrp":"85.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"11", "brand":"El Dorado", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMI,site5LP", "stickerText": "", "isVintage": "0", "outletonly": "0", "checksum":"41079093650", "priceVisibility": "1", "itemType": "New"}
I started using cobalt .010 and I've found they have plenty of clarity and bite. Please keep in mind there are many factors going into your sound. Amp, guitar pickups, strings, pick type, etc. Don't be disappointed if you get some premium strings that don't change your sound if your pickups can't pick up the movement very well. Start at a regular light. .010 is plenty flexible, and they won't break as often as a 8 or 9. Don't get caught up in the rookie mentality of "THIS is what kind of guitarist I will be, so I need everything to fit that." Experiment with different sizes and types.
The same bracing system and pickups in chrome covers are also included within the Vintage Reissue Series, with individual volume and tone controls, and a 3-way bat-style selector switch. Hardware includes individual chromed saddle-style mounted bridge with height adjustments, and a chrome trapeze tailpiece. The one-piece, Canadian maple set neck features a 20 fret, bound rosewood fingerboard, with pearloid block position markers.
The GT-70 was a re-styled two-pickup, single-cutaway recalling the F-55s. The cutaway retained the wide horizontal angle of before, however the upper bass bout received a more graceful treatment, with a slight inward curve as it met the neck at the 16th fret. The controls were the same as before; the elevated pickguard had become a large white affair, the tailpiece was the V-notched Bigsby. Pickups remained our familiar DeArmond humbuckers. Gone were the plastic bridges in favor of metal adjustable finetune variety. Finishes were either burgundy or black. The first prototype serial number was 203803. Around 1,450 of these were made between January of 1966 and October of 1968.
Straight out of the box you have over 68 on-board digital effects, 75 custom designed factory patches for iconic sounds, 5 amp emulations and 5 cabinet emulators, so you’re not going to run out of choices on stage or in the studio. In addition, you have access to the Guitar Lab software app that allows you to download new stomp boxes and patches regularly.
But we can't forget that Rocksmith 2014 is designed like any other game, and as satisfying as it is to be able to pick up a guitar and play, all I wanted to do was try and level up on some of my favorite songs. I quickly found that Foo Fighters' "Everlong" was beyond my grasp, and Oasis's "Don't Look Back in Anger" would never become my jam, but I quickly got my fix trying to nail down The Ramones' "Blitzkrieg Bop."
Why We Liked It - Whether you want to find an electric guitar to play sweet country tunes or something completely different, this is a great guitar! It’s extremely versatile and is therefore one of the best ones we’ve tried for beginners so far. That doesn’t mean it can suit more advanced musicians and many other skill levels as well, but especially for beginners, versatility is key.
The first impressive thing about the Zoom G3X is its build quality. This unit is solid, which puts our fears to rest that Zoom may have sacrificed build quality since the G3X is more on the budget side of the price spectrum. In the reviews and recommendations we read, several owners make it a point to comment that it feels like a serious piece of equipment that could withstand some abuse because of its sturdy metal construction. The G3X can be powered with a 9V adapter (which is conveniently included), or four AA batteries. Zoom claims about 6 hours of battery life, but in our experience manufacturers tend to exaggerate battery life a bit. Still, battery power is very convenient if you’re traveling with the G3X and want to do some on-the-go playing, or just taking it from room to room in your house (to save some money in the long run we recommend rechargeable batteries).
The Vox T-60/AC-100 bass amplifier uses two 15-inch cabinets and thirty-to-forty watts of solid-state power using "germanium transistors".[5] The Sunn Model T was used by The Moody Blues, Kiss, Queen, The Who's John Entwistle and Rush's Geddy Lee.[5] The Sunn used a 150-watt amp with "four 12AX7WA tubes, followed by two 12AX7A tubes, and powered by four 6L6GC tubes".[6]
Buying an electric guitar is a very personal process, with many things to consider before you make your final choice. It’s not just a case of picking something with a nice color – you are usually parting with a substantial chunk of hard-earned cash, ranging anywhere from $100 to $2000 – or more – for some guitars, and therefore patience is required to find something that really suits you.
The noise out of my chain drives me nuts. I want it when I want it, not when all is shut off. I am running a Clapton Signature Strat with humless pickups into my Blues Deluxe. No effects and it is quiet as the dead of night. Plug in the effects (All Boss BTW) and it just starts humming. I have been playing with it and cant seem to isolate the culprit (s)… Frustrating.
Jump up ^ The little finger whose use is not completely standardized in classical guitar technique can also be found designated by e or x. There are several words in Spanish for the little finger: dedo meñique, dedo auricular, dedo pequeño, but their initials conflict with the initials of the other fingers; c is said to be the initial of the dedo chiquito which is not the most common name for the little finger; e and x are not initials but letters that were picked, either with its own rationale, by people who didn't know what else to pick
Visit “mom and pop shops,” big-name musical instrument retailers, Craigslist, eBay & Amazon to compare the reviews and prices of various models. The ability to make an educated decision based on the feel, sound quality and playability is important. Consider renting a guitar for the first month of lessons. A good teacher will serve as a guide throughout the buying process and will teach you to play well enough to “test drive” your options.
Randall is a guitar amp manufacturer that specializes in high-gain sounds, and they are revered in the metal community. A Randall tube amp is a force to be reckoned with, but thanks to the late Darrell Abbott of Pantera and Damageplan their solid-state sounds are just as legendary. Dime loved the harsh, scooped sound of Randall amps, and it became his signature sound throughout his early career.

Placing a texture-based effect such as chorus before distortion basically means that the chorus effect will be distorted rather than the distorted tone getting some chorus. That may sound kind or original and appealing to some but trust me – you do not want to waste your distortion pedal effect by distorting an already subtle effect. This very concept is extremely important in determining the correct placement of your effects.
Yamaha F-310 Acoustic Dreadnought guitar in very good-excellent used condition no cracks or issues it looks great and the neck angle is excellent as well so as a result this guitar plays well with good fingerboard action with plenty of room on the saddle to lower action even more in future years if ever needed. Frets look good at 90-% with no ruts on fingerboard noted, truss rod is working fine, nut is 1-11/16ths. Yamaha specs (all of the F310 are made like this). It has 20 frets and a slim taper neck,The top is spruce, laminated, with natural finish. The sides and back are made of Meranti Indonesian Mahogany type wood , fingerboard and bridge are made Indian Rosewood, and the neck is of Nato. It's a full dreadnought guitar style, and just looks great.this one is in exceptional used condition better than average. Sound is good with nice volume and its tone is getting mature,,nice tone. No Cracks no issues no repairs and looks to have a bone nut and saddle this helps it have such a mature natural tone, Its sounds better than other F310’s Ive played I like this guitar and its price is right. any questions or to buy this guitar contact Joe at: .
Because of the high quality, Gibsons are among the more expensive models of guitars. However, Epiphone, of whom they are the parent organization, produces high quality guitars at much more affordable prices. These guitars are usually slightly inferior to their Gibson counterparts, but the playability and style are similar, and they are still a definitely among the good guitar brands.
Rocksmith displays six horizontal lines at the bottom of the screen that represent the guitar's six strings—E, A, D, G, B, and E—and show you which ones to play. The game color-codes them to try and make it a little easier to comprehend all this visual information at once, but there's no way around it—it takes quite a bit of practice and memorization to get used to this. You really need to practice to the point that you know intuitively which color belongs to which string. Otherwise you'll always be looking down to pick out which string you should be playing, and will never be able to keep up with the song.
I'm sorry to disagree Merlin, but the woods used really do make a big difference to the sound of a solid body guitar. Both the neck and body are resonators, the string energy drives the woods which damp some frequencies and use that energy to emphasise the resonant frequencies. That drives the string's vibration through the bridge/nut/fretboard. It's a feedback loop.

{ "thumbImageID": "GigMaker-EG-Electric-Guitar-Pack-Black/516049000001000", "defaultDisplayName": "Yamaha GigMaker EG Electric Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274115033940", "price": "259.99", "regularPrice": "259.99", "msrpPrice": "429.99", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-EG-Electric-Guitar-Pack-Black-1274115033940.gc", "skuImageId": "GigMaker-EG-Electric-Guitar-Pack-Black/516049000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Metallic Red", "sku": "sku:site51274115034206", "price": "259.99", "regularPrice": "259.99", "msrpPrice": "429.99", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-EG-Electric-Guitar-Pack-Metallic-Red-1274115034206.gc", "skuImageId": "GigMaker-EG-Electric-Guitar-Pack-Metallic-Red/516049000047000", "brandName": "Yamaha", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Metallic Dark Blue", "sku": "sku:site51274115034124", "price": "259.99", "regularPrice": "259.99", "msrpPrice": "429.99", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-EG-Electric-Guitar-Pack-Metallic-Dark-Blue-1274115034124.gc", "skuImageId": "GigMaker-EG-Electric-Guitar-Pack-Metallic-Dark-Blue/516049000087000", "brandName": "Yamaha", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Some bridges allow players to introduce vibrato into their performance by means of moving a vibrato arm (aka a whammy bar) that moves the bridge up or down. Bridges with this function are often called tremolos. (Note that this is musically incorrect since tremolo means a repeating variation in volume, not pitch, but has been used so long it is accepted terminology.) A tremolo system allows the player to rock the bridge back and forth to adjust the pitch of the notes being played. This is called a floating bridge, and is popular on many guitars. For beginners, it may be better to avoid a locking tuning system for their first guitar. They can be tricky to adjust properly, and can make even a simple string change frustrating for the inexperienced. However, if your budding Steve Vai has his heart set, don’t let that stand in the way.
Check the action and clearance of the guitar strings by playing it before you begin setup. There should be 3/64-inch between the fret and the string on the treble side, and 5/64-inch on the bass side. Check that there is no buzzing when you play high up on the neck, and that the strings are not too difficult to push. If you hear buzzing, the neck must be corrected for underbow; if the strings are too far from the frets, the neck must be corrected for overbow.
Seagull guitars were first manufactured in Quebec in 1982. Their goal was to introduce a high-quality guitar with all the essentials for a reasonable price. It goes without saying that they completed that goal, as Seagull guitars are still here today.Seagulls are great for both beginners and pros. They are durable and high-quality. They have incredible sound-quality and they have something for everyone. They make both acoustic and electric guitars at reasonable prices. Seagulls are easy to play even for beginners. Additionally, they strive to reduce the impact guitar manufacturers have on the environment. They use sustainable wood sourcing so that they can avoid deforestation. Reclaimed wood is often used in the production of Seagull guitars. 
The obvious first step is too loosen the truss rod, however, after inspection I learn the truss rod is already completely loose. In order to straighten the neck we opt for a heavier gauge string which places more tension on the neck, pulling it straight. The heavier gauge is necessary to render the neck flat, without it string buzz is overwhelming.
When you think about playing lead guitar, you think a lot about learning scales, learning guitar techniques like bending, sliding, vibrato, double stops, and other playing techniques that help give your guitar solos personality. One thing a lot of guitar players overlook, particularly in the beginning, is tone. A guitarist’s tone can be everything. Tone can act as a signature for guitar players. In this really neat Guitar Control video lesson, Robert shows you three electric guitar tone tips that can bring your guitar sound to life and make it instantly recognizable.
View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.
One of the very first things you will play is either an open C or and open G in standard tuning. These are chords and serve as the very fundamental unit of song construction. Getting a new player up and running with a few chords they can strum is one of the first sign posts on the way to playing. It’s pretty rewarding to get that G to ring out clearly. That said, the greatest guitar masters use moveable chord forms to construct thoughtful lead work and intricate guitar lines.
Mikko, spot on. Even light wood has density, and there comes a point in solid body electric guitars where how dense any piece of wood is only makes a difference acoustically. The point you made about how a guitar feels when you're playing it is sound, though. Its weight and acoustic resonance will affect how you respond to it and how you attack it (same for neck thickness and profile), and that will account for the preference we have for one guitar over another of the same model.

An alternative solution to raising the tailpiece is to pass the strings through from the FRONT of the tailpiece (heading towards the back of the guitar) and then passing them over the top of the tailpiece before they go over the bridge. Here you can see evidence of someone having set up the guitar in this way in the past (scuff marks from the strings passing over the top). Personally, this is not something I’ve ever needed to do, but the option is there should you choose to take it.
Whether your style is searing rock or acoustic folk, the right guitar will help you sound and feel like a superstar. From acoustic guitars to electric hybrids to bass guitars, there’s a guitar designed exactly for the way you play. You’ll be rocking out in no time when you choose a guitar from Best Buy’s selection of top brands like Fender, Yamaha, Squier, Schecter, Mahalo, Dean Guitars and more.

If the wood is the foundation of the structure, of course it will contribute to how the guitar sounds. Most people who argue that wood doesn’t affect the tone say that the string cant be affected by the wood because it is suspended between the metal parts of the guitar. If this were entirely true, you wouldn’t feel vibration in the guitar body. If the body of the guitar is vibrating, then it is going to affect the vibration of the string. The foundation of a structure will affect how it reacts to vibration.

Amp: Gain- increases and decreases how much gain your sound has. Treble- increases and decreases high frequencies in your sound, AKA the brightness of your tone. Mids- increases and decreases the middle frequencies in your sound, AKA the 'punchiness' of your tone, if that makes any sense. Bass- increases and decreases the low frequencies in your sound, AKA how much 'thump' it has.

We're not suggesting you become your own handyman 24/7. If your house roof tiles are falling to bits, you'd call a pro, right? But basic setup can be done, and if you eventually need help from a guitar pro, it's good to be able to explain what your bugbear is. Guitar players and guitars are all different, and it's simply good practice to think about what you do and don't like about your treasured instrument.
MUSICAL INSTRUMENT Piano Acoustic Pianos Digital Pianos Piano Accessories Guitars & Bass Guitar Accessories Guitar Amps Guitar Cables Guitar Pick-ups Guitar Stands Pedals & Processors Banjos & Ukeleles Basses Classical Guitars Electric Guitars Keyborad & Dmi Keyboard Accessories Keyboard Amps Keyboard Modules Synths, Etc Organs Drums & Percussion Cymbals Digital Drums Drums Accessories Drums Hardware Drum Heads Drum Sets Drum Sticks Percussion Marching Percussion Tuned Percussion Education Education Accessories Education Instrument Metronomes Notation Stands Pitch Pipes & Tuners Bowed Strings Cello & Bass Accessories Cellos & Double Bass Viola Accessories Viola Violin Accessories Violins Wind Instruments Brass Brass Accessories Woodwind Woodwind Accessories Harmonics & Accordions Accordions Harmonicas Indian Instrument Electronics Indian Instrument Harmoniums Indian Instrument Accessories Indian Percussion Indian String Instruments Indian Wind Instruments Tablas Computer Music Instrument Bundles Audio CDs Musician Essentials Other Fretted Instruments Mandolins & Accessories
I've been a guitar player for decades but only recently became serious about working on my instruments. In my research, I’ve found hundreds of articles about instrument repair, and while many are fantastic and chock full of information that’s invaluable to musicians, a lot is impractical or requires more space or specialized tools than most of us have. Plus, some repairs, such as fretwork, nut replacement, under-saddle pickup installation and finish repairs are best left to professionals.
Tonewood (basswood, mahogany, alder...) doesn't matter in an electric guitar unless you're getting ancient pickups for it. Older pickups used to act more like microphones and picked up sound resonating from the guitar body as well as from the strings. Modern technology has fixed that so the sound comes purely from the strings. Most guitar companies that market their guitars for tonewood are guitar brands that have been around since the times of these ancient pickups and based their marketing off of it. Most of them still haven't changed it. I recently read a scientific breakdown (experiment, analysis and all) that thoroughly proved the tonewood debate pointless once and for all. Every variable was accounted for-only tonewood was changed. So, don't worry about the basswood; it could be made from the least acoustic material on earth, and the pickups would give you the same sound as they would have on a different guitar material. I've spent months researching this in depth. (I play, too.)
Fender once again has proved itself to be a great name in the guitar industry by introducing this super acoustic model. It’s a full-size guitar and is IDEAL FOR BEGINNERS to start their musical journey as guitarists with it. It’s designed for learners so you must not expect too much from it, but yet, it is capable of producing great sounds in the hands of an advanced player that’s why claimed to be best suited for all styles of music.

Designed to restore Fender’s reputation after a group of employees led by William C. Schultz took over ownership from CBS in the early 1980s. The pickups used in early models were dual humbucking Red Lace Sensors in the bridge position and a single Blue Lace Sensor in the neck position. Later models (post 1995 or so) used three Gold Lace Sensors or a Red/Silver/Blue set in a Strat-like configuration, as well as low-friction roller nuts, locking synchronized vibrato bridge and tuners, and a bound contoured alder body with ash veneers. These instruments were discontinued in 1998 with the advent of the American Deluxe series. In 2011 Fender released the Modern Player Telecaster Plus as a part of the Modern Player series. The guitar has a humbucker in the bridge, a Strat pickup in the middle, and a Tele pickup in the neck positions.

Everything about the shape and feel of the S6 Original is meant to be as close to familiar acoustic guitars as possible, including its playability, which is brought about by its 25.5" scale length, 1.8" nut width and 16" fingerboard radius. Tone wise, you're getting a crisp yet warm tone thanks to its pressure-tested solid cedar top, which also adds to the overall earthy appeal of the instrument.
Pictures, description and soundclips from a 1973 Fender Musicmaster bass. The Musicmaster bass changed very little between it's introduction in 1970, and it's deletion in the early 1980s. Although often regarded as a student bass, the Musicmaster was of high enough quality, both in terms of components and build, to sell to student guitarists and more advanced players looking for an affordable shortscale bass.

Music Theory for Guitarists by Tom Kolb is one of the most comprehensive ways to learn music theory from a book that we can recommend. This book, and the combination of online audio that accompanies it, has helped many aspiring guitarists learn theory after being frustrated with trying to learn how to play the guitar. One reason that might be is because Tom uses very plain language to explain theoretical concepts that are often confusing and can come off as complex. Further, the book includes diagrams frequently, which really helps visual learners.

As we’ve shown here, a lot of relatively small—and inexpensive (many are practically free)—tweaks can hot-rod your tone and maneuver it to an array of differing ports of call. In some ways, it’s like tossing a handful of dice instead of just two—because the way small tweaks interact can lead to exponential changes in sound. For that reason, my advice is to take it slow and only make a single change at a time to understand what it delivers. Besides, it’s more fun (and less stressful) that way, anyway!
BC Rich is a fashionable brand of guitar that has been available since the year 1969. This is an American brand of acoustic & electric guitars & bass guitars. The brand produces 6-string electric guitars mahogany or basswood bodies. This brand is not as popular as other brands of electric guitars as it specializes in guitars for heavy metal & hard rock crowd. It is the choice of only those guitarists who are looking for an instrument that looks sound as edgy as possible. It offers trendy appearance and classic style of playing an electric guitar. The starting price of this brand of guitars is 29,000 INR approximately.
Before World War II, Epiphone was one of Gibson's fiercest competitors in the guitar market—especially when it came to archtops. With legendary models like the Broadway, Deluxe, Emperor and Triumph, they were a force to be reckoned with on the hollow-body electric guitar scene. In the 1940s, Epiphone went from one of Gibson's competitors to one of its subsidiaries, paving the way for Epiphone Electric Guitars to become synonymous with many Gibson models.  Despite this drastic shift, Epiphone continues to be renowned for their archtop electric guitars even today. Models like the Wildkat Royale and the limited edition ES-335 Pro are worthy throwbacks to that golden era of electric guitars, giving you authentic vintage sound that's perfect if you're into classic rock. Another Epiphone original that's still available today is the solid-body Wilshire. The impact that the Wilshire had on guitar design is so strong that it's still one of the first mental images that comes to mind when we think ""electric guitar.""
The Les Paul guitar line was originally conceived to include two models: the regular model (nicknamed the Goldtop), and the Custom model, which offered upgraded hardware and a more formal black finish. However, advancements in pickup, body, and hardware designs allowed the Les Paul to become a long-term series of electric solid-body guitars that targeted every price-point and market level except for the complete novice guitarist. This beginner guitar market was filled by the Melody Maker model, and although the inexpensive Melody Maker did not bear the Les Paul name, its body consistently followed the design of true Les Pauls throughout each era.

The tone from a Bourgeois produced with master grade Cocobolo wood using hot hide glue is superior to any guitar I have played, I can get an incredible reverb sound by applying a light percussion on the body with my forearm, this guitar is expensive but worth it. I believe Bourgeois builds 400 guitars per year, the other major producers production is 400 guitars per week.
Having said this, if it’s for a child under 12 we normally do recommend a nylon string as it’s easier for them to press the strings down. Some children can have tougher hands than others, so if you have a rough and tumble child, they mght be able to handle steel strings earlier than usual. Check out our buying guide for Choosing a Guitar for a Child for more information.

Swan7 offers the best quality guitars for most musicians. Based in Brooklyn, New York, Swan7 provides superior quality musical instruments for the music lovers. They are specially recognized due to their durability, reliability, and affordability. Hence, no matter if you are looking for a budget-friendly choice, or are yearning to buy an expensive model, Swan7 will satisfy your thirst for the best guitar.
Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.
000-15: Base model of the upper end Martin Guitar line. All mahogany orsapele construction. ‘A Frame’ “X” top bracing, 14 frets clear, Optional model 000-15S 12 frets clear. All -16 and -16 series 000 instruments have long scales (25.4″) and 1-11/16″ nut widths, in contrast to the -18, -28, and -45 series, which have the ‘traditional’ 24.9″ 000 scale, retaining the 1-11/16″ nut width.
Here is a list of the schematics that are exclusive to this site. We created several and we have redrawn some schematics that were already available on the internet  for readability or ease of use (these needed an easier-to-read format, corrections or part identifiers).  Many of these schematics include “modernization” that are included and explained in the “Project” for the given schematic.  You may freely post links to any of the pages or files on this site, but please do not put copies of these files on your site. We frequently update our files.  If you want to see photos of the original units of any of these guitar effects see our  “Originals” board on Pintrest  Note: All Trademarks mentioned here belong to their owners and not to General Guitar Gadgets
{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop18":"skucondition|0||creationdate|1","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","prop17":"sort by","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,","prop7":"[gc] used"}
The original flanger effect was produced back in the 1960’s by recording to two tape deck simultaneously and mixing the result. As they were recording, an audio engineer would lightly touching the flange of one the reels of tape. When it played back, it created a swooshing effect similar to what you hear when a jet airplane takes off. Stomp boxes use a delay effect to create a similar sound.
Martin factory action was traditionally higher than that used by makers like Taylor. Bob Taylor made his bones by offering acoustic guitars that felt and played like electric guitars. Martins had thicker necks, and higher action often called “Bluegrass action.” If you pick very hard, or do a lot of heavy hammer ons, lower action can be more of a problem if you want clean or pure notes.

First, let’s start with the switch. Like the Gibson-style switch, the Stratocaster’s is used to select between different pickups and combinations thereof. In this picture of Jimi Hendrix and his Stratocaster, the switch is just above the knobs. It’s a little hard to see because of the white pickguard, but if you have this type of guitar, you’ll have no trouble finding it on your own instrument.
Description: Body: Maple - Body Construction: Solid - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Natural
Why We Liked It - Guitarists often have a love hate relationship with signature models, but we really think that the SE Angelus is a worthy addition to our rundown of the ten best electric acoustics you can buy right now. It’s a good price, offers some great design and hardware, and of course comes with the seal of approval from one of rock’s most accomplished guitarists.

Well that and the effects, but Ample Sound even admits that the effects aren’t the greatest and recommends using another plugin for effects. Them admitting that might put a sour note on your tongue, but when you’re buying a VI in this price range, often it’s better to go for a plugin that is a master of a few components instead of one that attempts it all.
After shaping your sound, is important to add some depth to it, and here’s where the ‘ambiance’ pedals find their way into your rig. The chorus effect should be used properly, without overdoing it, but can give great results: the depth and the ‘3 guitarists playing your part’ effect can work amazingly well for your music. Delay and Reverb can be used lightly, in order to enhance your sound and fill up your guitar solos with a little space (by setting up a nice spring or hall reverb settings and a dotted delay) or heavily, to achieve creative sounds where the sky is the only limit.
With a growing popularity of the Les Paul guitars, hundreds of unendorsed imitations and copycat versions had appeared on the markets. However, due to the lack of U.S. legislation to address patent infringements and restrict the import sales, oversea imitations caused legal and financial problems to the Gibson Guitar Corporation. An also troublesome thing was the existence of high quality imitations of vintage Les Paul (and vintage Stratocaster) produced by oversea manufacturers.
2.  Cracked peg head.  Customer “fixed” with mystery glue and a wood screw.  Result:  Peg head and neck shaft not aligned. Fix: If the peg head can be re-broken you may be able to re-align the neck and re-glue (if it was glued with aliphatic glue you won’t be able to as the glue will not stick to itself).  The joint may have to be resurfaced and new wood may have to be inserted, possibly a spline as well.
So, learn chords, along with their related chords, and many, many songs will be at your fingertips, even songs you don't know or haven't played yet. As a teacher, I've shied away from teaching songs for learning the particular song's sake. There are many guitarists out there who 'haven't learned the chords to that song,so I can't play it'. Usually they actually have, but don't understand how to put them together to make that song. Also, learning a song generally means putting the particular set of chords in one order. Change key, and the fumbling starts.

The reverb driver amp consists of a phase inverting push-pull circuit made from dual sections of a 5532 high quality audio op-amp. This provides a voltage swing of approximate twice the supply voltage to the reverb impedance matching transformer, allowing higher power transfer. The 100 ohm resistor is critical for insuring a clean drive signal, without it, the op-amps can saturate when driving the transformer, producing unwanted distortion.
Most Gibson guitars feature two humbucking pickups, giving them a very full, clean sound. They are very simple in design, and easy to use with a focus on quality. Maintenance is also easy with Gibsons. Their bridge style places the strings closer together than the likes of Fender or Ibanez guitars, making them slightly different to play. While there is slightly less room for error in finger placement, the strings’ proximity makes them a better fit for small hands and for instrumentalists who need to rapidly navigate the fretboard.

After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars: supro","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,","prop7":"[gc] used"}
Amongst the best guitar brands in India for acoustic guitars, Martin is one that stands out. Martin is one of the best known brands for its steel-string guitars. It is a leading manufacturer of flat top guitars which produce top notch sound quality. However, the company is best known for their signature dreadnought acoustic guitar with X-bracing. It is truly one of the best guitar brands for some of the best quality guitars in the market.
Unfortunately, National’s line of instruments was not well diversified and, as demand for the expensive and hard-to-manufacture tri-cone guitars began to slip, the company realized that it would need to produce instruments with a lower production cost if it was going to succeed against rival manufacturers. Dissatisfaction with what John Dopyera felt was mismanagement led him to resign from National in January 1929, and he subsequently formed the Dobro Manufacturing Corporation, later called Dobro Corporation, Ltd, and began to manufacture his own line of resonator-equipped instruments (dobros). Patent infringement disagreements between National and Dobro led to a lawsuit in 1929 with Dobro suing National for $2,000,000 in damages. Problems within National’s management as well as pressure from the deepening Great Depression led to a production slowdown at National, and this ultimately resulted in part of the company’s fractured management structure organizing support for George Beauchamp’s newest project: the development of a fully electric guitar.[5]
In the late 1950s, various guitars in the Kay line were assigned new model numbers; according to the 1959 catalog, the Thin Twin became K5910 and the Electronic Bass became K5965.[18] Both instruments remained in Kay's catalog offerings with only minor cosmetic variations until 1966, when Kay revamped its entire guitar line to only feature budget instruments. Kay also manufactured versions of the Thin Twin guitar under the Silvertone (Sears) and Old Kraftsman (Spiegel) brands.
Strumming Patterns: Rhythmic strumming patterns are rarely coupled with delay.Chords: In some cases, swelling chords that are strummed once can work well with a delay effect, but generally this is avoided in favor of a less-saturating effect, perhaps a kind of light modulation.Short Arpeggios: A five to 10 note arpeggio is the perfect spot to dial in a smooth delay to help fill in the sound.Quick Solos: Speedier solos can work with delay and make sense, but the faster you’re playing, the harder it is to get delay to sound clean and not muddy.
For the last tip/technique, I’m going to shift gears and talk about recording acoustic—upright—bass. This may seem more daunting, but many of the same techniques apply—I’ll mention a few quick items that would be specific to the big box. While the dynamic mics I mentioned above might work fine (especially on stage), a good large-diaphragm condenser would be appropriate in the studio, to capture the high end and air of the acoustic instrument as well as the lows. On stage, the relatively low acoustic volume of the instrument may preclude more distant mic positioning, but you can wedge a small (pencil-type) mic into the bridge, with appropriate foam padding, and this, surprisingly, can often provide excellent sound and much better isolation. 
"Like any music technology, it's just a tool to help someone express their creativity. The gear never makes the player, but there's a purpose to it in certain playing situations and that's all good. As long as some guys are not hiding the truth of their playing behind it. A good player's a good player, and they usually sound good on an acoustic guitar simply because because they can actually play the damn thing.

Some of the earliest electric guitars adapted hollow bodied acoustic instruments and used tungsten pickups. This type of guitar was manufactured beginning in 1931 by Electro String Instrument Corporation under the direction of Adolph Rickenbacher and George Beauchamp. Their first design was built by Harry Watson, a craftsman who worked for Electro String. This new guitar which the company called "Rickenbackers" was the first of its kind.
Since National had applied for a patent on the single cone (US patent #1,808,756), Dopyera had to develop an alternative design. He did this by inverting the cone so that, rather than having the strings rest on the apex of the cone as the National method did, they rested on a cast aluminum spider that had eight legs sitting on the perimeter of the downward-pointing cone (US patent #1,896,484).
The author is an excellent writer and explains everything slowly but doesn't treat you like an idiot. He starts from the very beginning with teaching string names, notation etc but you can start anywhere in the book according to your knowledge and experience. Each exercise/song teaches a new concept and there is a very good sound quality CD that is enjoyable to play along with and hear what the proper timing should be.
In this section we look at the overall performance of the guitar. How does it feel to play and what does it sound like? The ultimate sound you achieve will largely depend on the amp you play through, but the guitar itself will play a huge part in sounding good. Do the pickups give enough clarity? How comfortable is the neck to get up and down? Is it built for speed? The more expensive a guitar, the better the performance should be, and this is taken into consideration when rating it.
How a guitar feels is highly subjective – after all, even guitarists come in all shapes and sizes. While the acoustics in our list are all made in such a way that most guitarists will find them comfortable and easy to play, there’s still no beating being able to try several models out so you can choose which one feels like it’s a part of your body.

In low-end instruments laminated or plywood soundboards are often used. Although these materials often impart great strength and stability to the instrument, via layers of perpendicular grains, they do not vibrate the same way that natural wood does, generally producing an inferior tone with less amplification. Instruments with laminated or plywood soundboards should be avoided if possible.

Whoever first got the sound down on tape, vinyl, acetate or whatever, it’s hard to imagine that adventurous, pioneering electric guitarists like Charlie Christian, Lonnie Johnson, T-Bone Walker and others didn’t crank up that brown electric suitcase to see just what it could do. Even if they were banned from such sonic mayhem on the bandstand or in the recording studio, you can bet a few juke joints and basement jams rang with the sound of distorted guitar right back into the 1940s and even the ’30s. Do you doubt it? Plug a fat-sounding Gibson ES-150—with its beefy ‘blade’ pickup—into an EH-150 or BR-1 amp wound up to max. Dirty? Damn straight. As for distortion, there are no more ‘firsts’ to be claimed. For sheer variety of sounds, however, the modern guitarist has it all over his predecessors.
Yes, split sound probably won’t be as loud as the other singles. The Cool Rails is really like a single coil sized version of our Jazz humbucker, so if you are after a more single coil sound, you can try the Vintage Rails, which is more of a single coil sound in a humcancelling format. You can always move the Cool Rails to the bridge position as well.
Echo – There is some crossover between delay pedals and echo pedals, but as a general rule, you can think of echo effects as extended delay effects. It’s a brother of reverb pedals, producing the canyon-like echoing you would naturally hear in a wide-open space. With long enough settings, an echo pedal can even let you harmonize against your own notes as they repeat.
The best electric guitar isn’t one that just sounds good (however you may define good as) — it’s how it feels in your hands. We remember when we could barely start forming memories, going to our dad’s shows and him using his telecaster on stage. He had been playing since he was 5 years old (which we actually used his opinion for in this guide as well) and continues to play today 50 years later. As we grew up and learned guitar ourselves, it was more about what was comfortable and felt as natural as possible. Paired up with the sound and feel, there are a few more factors to take into consideration when you’re looking for the best electric guitar.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(863) 688-4590, visibilitySalePrice=239.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114572014, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Fri Oct 12 04:15:17 PDT 2018, invMsgAvailability=, serialized=false, listPrice=239.99, isShipsInternational=false, name=dark red, storeCity=Lakeland, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Lakeland, newPrice=239.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=239.99, warranty=true, storeId=774, displayId=114572014, stickerDesc=, isOnSale=false} 239.99 USD
Volume pots are wired as simple voltage dividers. Higher settings have higher resistance to ground and lower series resistance, so more signal passes through. When maxed, volume pot has zero series resistance and full pot resistance to ground. Signal takes the path of least resistance and most of it will go though. However, some signal, mostly treble will be lost. With low pot values (250K) it will be more noticeable than with higher (500K and 1M) pots. That’s why typical pot values for brighter single coil pickups is 250K and for warmer humbuckers 500K or sometimes even 1M.

In 1957, president Sydney Katz introduced the Gold “K” line of archtop and solid body electric guitars[14] to compete with major manufacturers like Fender, Gibson, and Gretsch. The gold “K” Line featured the Jazz Special, Artist, Pro, Upbeat,[18] Jazz II, and Jazz Special Bass. Gold “K” guitars used the same hardware as top manufacturers. However, there were truss rod and neck issues.[citation needed]

Martin is an American guitar company specializing in acoustic guitars. Most of their instruments are still built at their facility in Nazareth, Pennsylvania, and their legacy dates back all the way to 1833. Martin, in many ways, has helped to shape the look and sound of the American acoustic guitar. In fact, they invented the now-classic dreadnought shape in an effort to help American country musicians who wanted more projection out of their guitars onstage.
Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.

“I was getting really bored with this guitar sound—or lack of an interesting sound,” Davies remembers. “There was this little radio spares shop up the road, and they had a little green amplifier in there next to the radios. An Elpico. I twiddled around with it and didn’t know what to do. I tried taking the wires going to the speaker and putting a jack plug on there and plugging it straight into my AC30. It kind of made a weird noise, but it wasn’t what I was looking for.
Fender’s open-back combo tube amps have been used on countless hit records in practically every genre of music in the past half-century. They can deliver both warm bell-like clean tones and gritty overdriven snarls. The Blue Junior III is a relatively inexpensive way to get into Fender tube amps, and it’s the perfect size for studio and small venues.
The initial single-pickup production model appeared in 1950, and was called the Esquire. Fewer than fifty guitars were originally produced under that name, and most were replaced under warranty because of early manufacturing problems. In particular, the Esquire necks had notruss rod and many were replaced due to bent necks. Later in 1950, this single-pickup model was discontinued, and a two-pickup model was renamed the Broadcaster. From this point onwards all Fender necks incorporated truss rods. The Gretsch company, itself a manufacturer of hollowbody electric guitars (and now owned by Fender), claimed that “Broadcaster” violated the trademark for its Broadkaster line of drums, and as a newcomer to the industry, Fender decided to bend and changed the name to Telecaster, after the newly popular medium of television. (The guitars manufactured in the interim bore no name, and are now popularly called ‘Nocasters.’) The Esquire was reintroduced as a one-pickup Telecaster, at a lower price.

Delay pedals are among the most popular effects around, and the reason is simple: A delay pedal not only gives your sound a professional sheen and adds a three-dimensional quality—even when set for a discreet, atmospheric effect—but it can also produce a wide variety of not-so-subtle sounds and textures, ranging from ear-twisting rhythmic repeats (à la Eddie Van Halen’s “Cathedral”) to faux twin-guitar harmonies and live looping.
Barney Kessel, American jazz/blues guitarist/session musician prominent in the 1950s and 1960s. Kessel endorsed the Kay "Jazz Special", "Artist" and "Pro" guitars. As of 2016 the Barney Kessel name has been assigned exclusive manufacturing rights with the Kay Guitar Company. Kay is now reissuing the 1960s signature models (Barney Kessel Pro, Barney Kessel Artist, Barney Kessel Jazz Special). Contrary to some misleading stories, Barney Kessel often played Kay Guitars and can seen on video playing a Kay Jazz Special Guitar on the T.V. series Johnny Staccato, "Television’s Jazz Detective"
Great Condition, "335-style" hollow body / Thin-Line, Japanese Electric Guitar by Diasonic. 2-single coil Pick-ups. Great black to red see through Sunburst finish. Bound, Rosewood fingerboard  w/ dot inlays and solid mahogany neck. Four bolt neck joint, double bound body and laminated top, back and sides for excellent long-term durability and great feedback control. "Trapeze" tailpiece w/ rosewood bridge, featuring adjustable string spacing. Separate on/off's for each pickup, Volume and Tone and adjustable truss rod. Very shiny. Finish and wood in great shape. Virtually no wear to finish. All chrome perfect and rust-free. Original pick guard perfect and intact.  Pickup bezels have minor issues, see above photos for details. Plays and sounds great. Whammy bar included! Frets in great shape with minor, virtually no wear. Nice flat frets for speedier action. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .010 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!),  and cleaning and polishing. Plays and sounds great. We also installed a new set of .010 "Round-wound" strings.

The Model EP-17-T was a regular-sized thinline with a single round cutaway, bolt-on neck, non-dipped three-and-three head, dots, three pickups, adjustable bridge, plain trapeze tail, elevated guard, three rocker switches plate-mounted on the upper shoulder, and controls on a rectangular strip on the lower bout. All three were offered in shaded mahogany finish.
{"eVar4":"shop: guitars","pageName":"[mf] shop: guitars: ibanez","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"ibanez","prop5":"[mf] shop: guitars","prop6":"[mf] shop: guitars","prop3":"[mf] shop: guitars","prop4":"[mf] shop: guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] category"}
Another tone option for a guitarist is to put a pickup out of phase with another pickup, producing a thin "inside-out" squawky kind of sound. When 2 pickups are in phase, they work together and reinforce each other. When they are out of phase the 2 pickups are working against one another and the resulting sound is the "leftovers" from these cancelations. The closer the 2 pickups are, the greater the cancelations, the thinner the sound and the lesser the volume. Therefore, the neck and bridge pickups out of phase is the best choice for this type of sound.
Guitar tabs (which is short for tablature) is a type of musical notation for stringed instruments that show you which fret to play on each string, as opposed to standard staff notation, which shows you the pitch of a note. Beginner guitarists have a much easier time learning from tablature, but in the long run, it’s a good idea to learn the standard musical notation as well.
© 2013 Ubisoft Entertainment. All Rights Reserved. Rocksmith logo,, Ubisoft, and the Ubisoft logo are trademarks of Ubisoft Entertainment in the US and/or other countries. The “PS” Family logo and “PS3” are registered trademarks and the PlayStation Network logo is a trademark of Sony Computer Entertainment Inc. Software platform logo (TM and ©) EMA 2006.
The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place...  Click To Read More About This Product
Great Martin Copy from the later 60's This example is a Well Crafted in Japan model with the "orange lable" Nippon Gakki highly collectable now as a great player Martin like player. Great wood...just see the pics WoW! Sitka Soruce Top, Premium AAA Grade Mahogany neck - sides & back...Made by serious craftsmen high degree of skill and well balanced. Nice big Tone as a Martin same type X bracing and is a proven performer. Nicely aged wood and is a wonderful playing 7 sounding vintage guitar equal to many more expensive builders like Martin. This one has a slight stable old top crack as glued and is not an issue anymore...Plays like butta...You will love the sound! .
By moving up or down one level, in terms of magnetic strength, you can usually add or subtract a little edge from a pickup. If your guitar is too tangy, moving down one pickup level (e.g., from alnico 4 to alnico 2) may smooth it out. If you want to add bite, go with a slightly stronger magnet—like, alnico 5 to a ceramic magnet. The good part is that magnets are both easy to find and inexpensive in comparison to buying a whole new pickup.

You'll then learn G major and the variation you can play of this chord, where you hold the B string at the third fret, or just leave it open. The final chord you'll learn is F major. This one is tricky because its a barre chord, but there is a way of making these types of chords a little easier to learn, as shown in the video. You will also be shown the partial barre chord shape of F major, and will see how moving this shape around gives you any major chord you want to play.
Today's use of Torres and post-Torres type guitars for repertoire of all periods is sometimes critically viewed: Torres and post-Torres style modern guitars (with their fan-bracing and design) have a thick and strong tone, very suitable for modern-era repertoire. However, they are considered to emphasize the fundamental too heavily (at the expense of overtone partials) for earlier repertoire (Classical/Romantic: Carulli, Sor, Giuliani, Mertz, ...; Baroque: de Visee, ...; etc.). "Andrés Segovia presented the Spanish guitar as a versatile model for all playing styles"[5] to the extent, that still today, "many guitarists have tunnel-vision of the world of the guitar, coming from the modern Segovia tradition".[6]
At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.
4) Aside from enough publishing errors that, to my sensibilities, mean that the book is not ready to be published, instructions are shown on how to add a Varistor switch to a guitar, and a Les Paul is used for the example. The drilled hole given as the example is nothing less than a hack job, I hate to say it, but it is. I would faint if I saw a tech do that to my guitar. Besides its being really bad advice in the first place, if you are going to do it, DONT follow this example!
Choose from electric guitars with hardwood, polyester, or leather bodies, and carbon, maple, or rosewood fretboards. We offer right-handed and left-handed configurations, along with electric guitars that feature options like Tune-O-Matic, tremolo, and adjustable bridges. If you're brand-new to playing, you can even find a student kit including lesson books and helpful accessories to keep you on beat and in tune as you teach yourself to strum.
Chicago’s vintage guitar shop is located in Ravenswood just west of Lincoln Square. Rock N Roll Vintage is your one stop shop in Chicago for new guitars, vintage guitars, Chicago guitar lessons, guitar pedals, and we are currently the largest synth dealer in the Midwest. Looking for a specific guitar? Rock N Roll Vintage Guitar Shop carries Fender, Gibson, Martin, Gretsch, Rickenbacker and other popular guitars and basses including boutique amps. We have one of the largest selections of effects pedals in Chicago with many hard to find boutique pedal brands.
Let’s face it, without people listening and responding to your music, there’s not much point in you throwing all you have into that hobby or business. Furthermore, it is relatively hard to be a passionate musician and to work in a more reliably financial-rewarding job alongside it, so one of your primary goals as a musician is bound to be to crack the music business and start making millions.
Effects and effects units—stompboxes in particular—have been celebrated by pop and rock musicians in album titles, songs and band names. The Big Muff, a fuzzbox manufactured by Electro-Harmonix,[49] is commemorated by the Depeche Mode song "Big Muff" and the Mudhoney EP Superfuzz Bigmuff. Nine Inch Nails, Pink Floyd, George Harrison, They Might Be Giants and Joy Division are among the many musicians who have referenced effects units in their music.[50]
A towering figure in the Japanese underground beginning in the early ’70s, Keiji Haino plays guitar — often distorted to the point of pure sound — with such a wild diversity that it’s misleading to call him merely a “noise guitarist.” But he is very, very, very noisy. With personas that include blues-sludge hero, noise-blast deployer, and big-eared post-psychedelic improviser, Haino’s renown (and collaborations) spread far beyond Japan, most notably with albums recorded by Fushitusha, his all-improv/nominally rock outfit.
A well-reviewed electric guitar with a high-quality design, the ESP LTD EC-1000 is the best electric guitar for the musician looking to upgrade their sound and achieve an exaggerated tone associated with the world of rock-and-roll. Both the body and neck of the guitar are made from mahogany with a rosewood fretboard, making this guitar lightweight in feel and balanced in design. The 24 frets come in an extra-large size for ease and comfort in chord changes, while the tailpiece and locking bridge make tuning  both easy to achieve and maintain. Output of the sound is well controlled with the toggle switch, and the model comes with two volume controls for different modes of play. Designed for the musicians with years of experience and a desire to play with a harder edge to their sound, the ESP LTD EC-1000 offers high-end features for a reasonable price. We’re huge fans of their entire EC series.
For many years, Martin has used a model-labeling system featuring an initial letter, number, or series of zeros specifying the body size and type; traditionally 5- is the smallest (and technically a terz, tuned a minor third higher than a guitar, at GCFA#DG), advancing in size through 4-, 3-, 2-, 1-, 0-, 00- and 000- (though these are commonly referred to as “Oh”, “triple-oh”, etc. they are, in fact, denoted by zeros, keeping the numerical-size theme constant. These instruments originally had in common a neck that joined the body at the 12th fret. In 1916 Martin contracted with Ditson’s music store to produce a much larger store-badged guitar to compete sonically in ensembles; this boxy thunderer was named the Dreadnought in honor of the most horrific weapons system of the day, a British Navy battleship so large it could fear nothing, or “dread nought”. Indeed, HMS Dreadnought was its name, and it proved an apt product tie-in between the huge ship and the huge guitar. In 1931, Martin introduced D-bodied guitars under their own name, and a new standard was set. Around the same time, to meet the needs of banjo players wanting to cash in the guitar’s new popularity, Martin unveiled a second line of letter-named guitars, the OMs. Taking the body of the 000-, squaring its shoulder to meet the body at the 14th fret, and lengthening the scale, they created a truly legendary line of instruments (OM- wood-and-trim packages ranged from the plain -18 (mahagony back and sides) and -21 (with rosewood) to the full-on pimpmobile OM-45. The 14-fret body of the OMs proved so popular that it quickly became the standard for 00-, 000-, and D- models as well. There things stayed for about 45 years; then, in 1976, Martin debuted the M-36 and M-38. Keeping the narrow-waisted shape and moderate depth of the 000-, and combining it with a width slightly more than even that of a D-, the M-s (sometimes called 0000-) were phenomononally well-balanced in their tone. These have lately been joined by the Gibson-Jumboesque J, and the even larger SJ. The numbers/letters denoting body size and shape are generally followed by a number that designates the guitar’s ornamentation and style, including the species of wood from which the guitar is constructed. Generally, the higher the number, the higher the level of ornamentation. Additional letters or numbers added to this basic system are used to designate special features (such as a built-in pickup or a cutaway).
Semi-Hollow: As the name suggests, you’re getting a smaller type of sound box while some support of amplification at the same time. This allows us to use an amp (with proper adjustments — there will definitely be some feedback worries of course), but they’re a lot lighter in weight than solid bodies and people tend to say they’re more versatile than our previously explained type. The superlatives used when it comes to hollow-body sound usually include “warm”, “bright”, and nice overtones. Preferred guitarists? Jazz, rockabilly, vintage country, etc.

This is where you want to go. I brought Steve an old Telecaster with a faulty input jack. He not only had the parts needed to fix it, but came up with a better, more stable solution that would avoid the same problem later, all in a few minutes while I waited, and for the walking-around money I had in my pocket. He is professional, expert, friendly, and reasonable. I couldn't ask for more.

From a perfectionist/engineering standpoint, there is a lot wrong with this circuit. The controls are complexly interactive. There is no really flat setting, as there is a residual midrange scoop unless the Treble and Bass controls are fully down. The action of the Bass control is very uneven for normal taper controls. While the Mid control appears to affect only the mids, it is actually a form of volume control that affects all frequencies, but is the only control that also affects mids. Although it has several imperfections, this tone stack actually helps some of the quirks of guitar, so it works well.
A better way to get distortion, of course, is to use guitar effect pedals. Got your hands on some pedals and starting to play around with the sounds you can make? Well, you can still use these tips to further enhance your distorted tone, since the same theory applies. Most distortion pedals have a volume, gain, and distortion knob in addition to whatever additional controls they give you. If you're simply not satisfied with your pedal's guitar distortion, you can turn the gain up and adjust the other settings, just like you'd do on your amp.
Clean or replace switches. To clean switches use solvent such as contact cleaner in a spray into the toggle itself, you may also use other solvents such as WD-40, always work the solvent around by using the switch as indented. To replace switches first obtain a proper switch that applies with your guitar, then soldering in accordingly. Work in a well-ventilated space to avoid harmful fumes from solder or solvents.
So what is the point of getting a small guitar amp? I mean you can get a whole lot of sound out of a medium sized amp without all of the sound issues that the small amps have. And yeah they are more ungainly and harder to lug around, but at least they have the sound and power required to handle a live performance and even band practice. Plus you can turn down the sound and practice at home just as well, right?’

  Technology is not based on good materials and dexterity alone. It's how you finish your work that counts. It's the little details that you labour over until it's just right. It's an arduous process of creating and destroying and rebuilding until its perfect; until there's nothing left to add, and nothing left to take away. Then it's ready. Swing is well known for its attention to detail in our incredible Custom Shop models, but what you may not know, is that we make no distinction between them and our retail guitars. They all receive the same exacting standard we demand of any product that carries the name "Swing". Our attention to quality and detail costs us more than what other manufacturers consider as an adequate alternative. We do not take shortcuts with every detail because we have found that the careful, educated player can hear those shortcuts. Again, it shouldn't come as surprise though, it's really the only explanation why after only 2 years in business we rose to become #1, and have stayed there for three years and counting.

Many of the best guitars I saw in my trip to Japan were models made for their own domestic consumption. After World War II, U.S. Armed Forces Radio blanketed Japan with American music. As a direct result, rock and roll, country, bluegrass and American popular music all took strong root in Japan creating a vibrant market for good guitars. Although Japanese players would have preferred to be able to buy genuine American Martins, Fenders and Gibsons, the supply of such instruments in Japan was extremely limited and prices were simply beyond the budget of most of the Japanese population. Japanese manufacturers produced a very wide range of instruments from low-priced student models on up to remarkably sophisticated professional-grade instruments, some of which were better reproductions of vintage American instruments than any of the American manufacturers were doing at the time. These high-end instruments are seldom encountered in the USA because they were priced high enough that wholesalers in the USA did not find them economical to import. Regardless of how good a Japanese guitar of that time might have been, if it cost anywhere near the amount of a new Martin, Fender or Gibson in the USA, there would have been no point in bringing it into this country. For example Tak Inoue, the export director of the Morris Company of Matsumoto, Japan, told me at that time that he had approached Fender to offer them Japanese-made versions of the Telecaster and Stratocaster which he proposed they could import and sell at a lower price that the standard American-made models. He told me that he gave them what he considered to be a very competitive price only to be told that Fender would not be interested since their cost at that time to make a genuine American made Telecaster or Stratocaster in their Fullerton, California, factory was actually lower than the amount quoted by Mr. Inoue. Needless to say, it would appear that CBS, the owner of Fender, had a very good profit margin at the time.
Well, to be more specific, we're talking about Twin Reverbs made between 1965 and 1967. Throughout the decades, these sought-after tone machines have turned up in the rigs of countless guitarists, including Stevie Ray Vaughan—who used a mid-Sixties 85-watt blackface model during his 1985 tour of Japan—Steve Howe, Johnny Marr, Jack White and Dweezil Zappa. The Fender Twin Reverb is considered a standard model for players seeking a clean sound, and it is especially known for the quality of its built-in spring reverb.
• Why size matters: Fret width and height affect playability considerably. Fret wire measures at .078 to .110 at the crown, or top, and runs between .035 and .055 high. Taller frets, at .45 and up, tend to make for easier string bending and produce clear notes without much pressure. The latter makes them ideal for high speed playing. The furthest point of that concept is the scalloped fretboard, employed most notably by Yngwie Malmsteen and John McLaughlin, who played a specially designed Gibson J-200 with scalloped frets and drone strings with the group Shakti.
The Effect: Wah pedals are primarily based on inductors, and later on Fasel inductors – serving as integral parts which play a big role in the outcome of the sound itself. They work on a basic principle, by adjusting a wah pedal’s footswitch your sound frequency’s behavior is modified, resulting in a “wah wah” tone – for further clarification take a listen to “Voodoo Child” by Jimi Hendrix. Naturally, effects may vary slightly or greatly depending on the model in question. Some of the most popular modern wah pedals are Dunlop’s numerous Cry Baby iterations and Vox’ marvelous classic enhanced remakes. The thing that sets wah pedals apart from other types in a unique way, is the fact that they rarely feature any controls, it’s just the footswitch and a dynamic range of impressive funky tones at your disposal.

Clipping is a non-linear process that produces frequencies not originally present in the audio signal. These frequencies can be harmonic overtones, meaning they are whole number multiples of one of the signal's original frequencies, or "inharmonic", resulting from general intermodulation distortion.[34][35][36] The same nonlinear device will produce both types of distortion, depending on the input signal. Intermodulation occurs whenever the input frequencies are not already harmonically related. For instance, playing a power chord through distortion results in intermodulation that produces new subharmonics.
Choosing the right strings for your instrument and your style of playing might not seem like the biggest deal. After all, the Delta bluesmen of the ’20s, ’30s and ’40s often bought used strings at dry good stores for a few pennies, or boiled old strings to brighten them up. And the proliferation of brands on the market can be overwhelming to the point of leading a player to assume strings are as generic as picks – which aren’t really generic at all, but that’s another story.
My question for this forum is this: I currently have a 2011 Fender Blacktop HH Stratocaster. It has the stock five position switch. All of the electronics are imports i.e.Korea, China etc.. I recently purchased a complete loaded pickguard from a Fender American Standard HH Strat. due to the poor overall performance of the Blacktop electronics-pickups included. Since the Amer. Stan. HH has only a 3 pos. switch, can I rewire it for a five pos. switch ( i.e. coil tapping the humbuckers as the Blacktop is configured)? If this is possible, where would I find a wiring diagram for these particular Fender Twin Head Vintage pickups showing them in use with a 5 pos. switch? Thank you for your time and cooperation.
Washburn is an EXCELLENT brand. I have owned an N4, 2 N2's, and their latest, cheapest Nuno model for my daughter. My daughter's guitar is amazing for the price I wish I had such quality for my starter guitar. I would put my N4 up against ANY guitar- period. Plus, whenever I have contacted the company, they have top notch customer service. I know this isn't about amps, but I wrote them about an issue I had with my Randall amp ( a division of Washburn). Without me asking, they mailed me an amp part with an apology. Top notch.
The EB-18 was the first electric bass the Martin company produced in 1979. The single-pickup EB-18 was a partner to Martin’s E-series electric guitars. Its scroll-shaped headstock was reminiscent of the Stauffer-style pegheads of early Martins. The EB-28 was added to the line a year later. It had a mahogany body and PJ pickups. Both models were discontinued in 1983.

It usually has 8 terminals – two poles with 4 terminals each. Each pole has one common terminal and 3 switched. The first thing you want to figure out is which terminal is common. Note that terminal on the left is connected to the lever all the time – that’s our common terminal. The other three terminals are connected to the lever only in certain switch positions. Represented as a schematic, each pole would look like this.

THe 3 way switches is normally placed on the guitar with 2 pick up. For easy reference the Gibson Lespaul, that has 2 humbucker or soapbar type pickups. 1 near the bridge and one near to the neck. As it has 3 way switches it has 3 types of selection. 1st toggle normally for the bridge pickup, 2nd toggle is for the neck and bridge pickup. the 3rd toggle is for the neck pickup
A lot of users described the Line 6 Helix Floor as something amazing and too good to be true. Commendations for it's incredible versatility and sound quality are common place, with many describing it as the best guitar multi-effects processor in the market today. There's simply no denying its continued success in the market, along with the high review scores that it continuous to attain. Premiere Guitar properly summed up what most people feel about the Line 6 Helix Floor: "Great sounds. Cool design. Solid construction. Extraordinary connectivity. Good price."
If you prefer the Linux platform, then Guitarix is your best free guitar effects solution. It is a free, full featured guitar amp and effects software. Aside from its impressive amp modeling capabilities, Guitarix has 25 equally impressive effects modules. Effects include a noise gate, modulation effects like flanger and phaser and it even has weird stuff like auto-wah. Guitarix's low latency audio engine ensures respectable audio, which is said to give you not more than 10 milli seconds of delay. This is a simple yet effective guitar effects software, unfortunately it is only available for Linux users.
Regarding truss rods, all vintage Martin instruments post-1934 have *non-adustable* truss rods (T rod). This means the neck better be straight, otherwise an expensive repair will be in order. To check neck straightness on a guitar, first tune the guitar to pitch. Then hold the low-E string down at the 1st and 14th frets. Note the distance between the bottom of the low-E string, and the 7th fret. You should be able to put a medium guitar pick in this space. Any more, and the neck is "bowed". Any less, and the neck is "back bowed". Repeat this with the high-E string (the same results should be seen; if not, the neck has a "twist" to it).

{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: signal processors","pageName":"[gc] shop: pro audio: signal processors: multi effects processors","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: signal processors","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"multi effects processors","prop5":"[gc] shop: pro audio: signal processors: multi effects processors","prop6":"[gc] shop: pro audio: signal processors: multi effects processors","prop3":"[gc] shop: pro audio: signal processors: multi effects processors","prop4":"[gc] shop: pro audio: signal processors: multi effects processors","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
Consider the use of a power soak. A power soak is a supplemental piece of equipment used in-line to reduce the volume output of an amp while maintaining tone and sustain. The signal moves through the line to the power soak, which absorbs part of the full power of the amp. This adjusted signal is transmitted to the amp, resulting in quieter volumes.[26]
A great app for playing and basic editing of general midi files is Sweet Midi Player which includes a lyric viewer for midis with lyrics/chords. You can load one of the General Midi SoundFonts above to greatly improve the sound quality. For Windows PC use the free program Coolsoft VirtualMIDISynth to install a new GM SoundFont (Get the latest version 2.1.0 for Windows 10).
Conversely, buyers can use these websites to find out what the real value of a guitar is. This can be useful whether you're buying from a private seller or the guitar store down the street. Don't be afraid to haggle if the seller wants more than the guitar is actually worth according to book value. While the seller may eventually find another buyer, there's no reason for you to over pay.
In the 1950s, several guitarists experimented with producing distortion by deliberately overdriving amplifiers. These included Goree Carter,[3] Joe Hill Louis,[4][5] Elmore James,[6] Ike Turner,[7] Willie Johnson,[8] Pat Hare,[9] Guitar Slim,[10] Chuck Berry,[11] Johnny Burnette,[8] and Link Wray.[12] In the early 1960s, surf rock guitarist Dick Dale worked closely with Fender to produce custom made amplifiers,[13] including the first 100-watt guitar amplifier.[14] He pushed the limits of electric amplification technology, helping to develop new equipment that was capable of producing "thick, clearly defined tones" at "previously undreamed-of volumes."[13]

The solid state amp isn’t really new either, but it only came into its own following William Shockley’s world-changing invention, the transistor. Its use for the audio circuitry allows the amp to be more adaptable and easier to tune, but despite innovations in recent years, the overdrive of solid state amps isn’t yet on par with what a tube can offer, and only a few manufacturers can boast of products that come close to sounding as clean as a tube amp.
Directional mics, such as cardioids and figure-of-eights, exhibit different frequency responses off axis — broadly speaking, off-axis sounds tend to be duller, although it's a complex effect which is different for each model. Professional producers are well aware of this, and employ the effect to refine their sounds. For instance, Chuck Ainlay comments "I'll usually start with a [Shure SM57] on the amp; but not straight on axis with the middle of the speaker; it's usually off-centre, angled towards the middle of the speaker and generally just off the grille." Jay Graydon refers to a fairly similar setup: "I position the mic about one inch left of the edge of the speaker-cone centre, using a 22-degree angle, and about one inch back from the grille cloth." Andy Johns, on the other hand, has said that "the miking technique I used on electric guitars for years was two [Shure SM57s], one straight on, and one at 45 degrees. Put 'em together, and it always works."
The material in the neck and fretboard also matters. Some guitars have both neck and fretboard in maple, and they will typically have a bright and open sound. Rosewood has traditionally been used for fretboards, usually combined with a maple neck, because it is a hardy and oily wood that can stand up to extensive human contact. Rosewood will give a darker tone than maple alone.
Playability and tone are two of its most commended traits. Many describe its neck as very easy on the hands, while others describe the overall playing experience to be better than their other acoustic guitars. The TK-40D preamp gets a lot of nod from users who want to fine tune their amplified sound, while there are also many who are satisfied with its acoustic sound.

The desire for innovative sounds has intrigued musicians in every culture since the dawn of time. Oscillating the volume of a note is an ancient technique — we’ve been able to do it with our voices as long as we’ve been capable of singing. Any musician playing a stringed instrument can create tremolo effect — they simply move the bow or finger back and forth while sustaining a note, as violinists and cellists do. But what about other sounds? How has the addition of mechanical and digital devices changed our music?
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
{"id": "H98107", "skuOrProductId": "H98107", "categoryId":"site1AAG", "name":"DT1GFM Destroyer Electric Guitar", "pageUrl":"/guitars/ibanez-dt1gfm-destroyer-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/ibanez-dt1gfm-destroyer-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"Made of mahogany, the Destroyer's iconic body style has been attracting artists for years. It features a mahogany slim neck grip and set-in neck that offers ultra-smooth playablity. Electronics include DiMarzio Air Norton and The Tone Zone pickups for a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters.

Air Norton
The Air Norton started out simply to be the Airbucker version of the Norton. DiMarzio thought it would make a distinctive-sounding bridge pickup with high-gain amps, but they soon discovered that it's a radically neat neck pickup, too. The tone is deep and warm, but not muddy. It's hot, but not distorted. It's even got cool harmonics, which are really unusual for a neck humbucker. The patented Air Norton magnetic structure reduces string-pull, so sustain is improved; and pick attack and dynamics are tremendously controllable and expressive. Combine the Air Norton with The Tone Zone in the bridge position for a perfect blend of power and tone.

The Tone Zone
Have you ever heard a bridge pickup that made a guitar sound like a giant mosquito attack? If you've run into this problem, The Tone Zone is the solution. The Tone Zone is hot enough to qualify as a high-output pickup, but it has a wider dynamic range - hard picking will produce a lot of power, and softer picking will be much cleaner and quieter. It's got tremendous bass and low-mid response to reinforce the bottom end and make the overall sound bigger. The highest single notes have depth, and chords sound huge. Patented dual-resonance coils reproduce more overtones than you'd expect from such a fat-sounding pickup. It makes a great match with an Air Norton.

Case sold separately.
", "value":"319.36", "priceMin":"319.36", "priceMax":"799.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}

SJ Series: The SJ is Collings’ version of what is commonly called a small Jumbo. Although the 16 inch lower bout is slightly wider than a dreadnought, and the sides almost as deep, the tight curve at the waist creates in a very different sound chamber. SJs, especially examples in maple, typically have a more pronounced midrange response when compared to a dreadnought.

In late 1966, Peter Green had the job of replacing Eric Clapton in John Mayall's Bluesbreakers. Mayall told his producer, "He might not be better [than Clapton] now. But you wait… he's going to be the best." Soon, with the original Fleetwood Mac, he was Britain's most progressive blues guitarist, with a Chicago-informed aggression heightened by the melodic adventure on albums like 1969's Then Play On. Green soon entered a dark age of mental and health problems, returning in the Nineties with more subdued but recognizable gifts.
Gibson: These guys have been making musical instruments for well over 100 years. Founded by Orville Gibson back in 1890 and not producing guitars at the time (and certainly not electrics because those hadn’t even been invented yet), Gibson has had plenty of time to cement itself as one of the leading guitar companies. They are one of the few to keep their main brand name as a prestige-only brand and applying a different brand name (Epiphone) to their imported, lesser-priced instruments. They invented the arch-top guitar and created some of the most iconic instruments in guitar-history. These includes their by far most famous model, the Les Paul. Other iconic models are the SG, Explorer, Flying V, ES-175 and the Firebird. The ES-175 was to become the first really popular electric guitar. This happened before solid body guitars had even been invented. To this day, the Gibson Les Paul remains one of the most desirable and expensive guitars in the world. In order to tap into various price-points, Gibson creates less expensive Les Paul models around the $1,000 range, like the very popular Les Paul Studio. The more expensive models such as the Les Paul Standard are up in the $2,500+ range. Finally, there are even more expensive models such as the Les Paul Custom in the vicinity of $3,000+. Off course, they also create some very special limited run guitars than can easily fetch close to the $10,000 mark. In line with the car analogy earlier: While not Italian, I’d be happy to call the $2,500+ Gibsons the Ferraris of the guitar industry.
While the Boss MS-3 is a fairly recent release, it does have quite the number of reviews, most of them coming from users who have nothing but good things to say about their experience with the unit. One user summarized what most reviewers felt by saying that the MS-3 is a "game changer". But it's not just about its amp and effects switching, because many were just as impressed with the sound quality of many of its built-in effects, including its overdrive and modulation sections. It's compact and portable design is also very much appreciated, making it an easy addition to any setups.

Early proponents of the electric guitar on record include Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Eddie Durham, Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra), Tampa Red, Memphis Minnie, and Arthur Crudup. According to jazz historian James Lincoln Collier, Floyd Smith can be credited as the first person to rig up an amplified guitar. According to Collier, "Floyd's Guitar Blues" may be the first important use of the electric guitar on record.[17]