Paul Kossoff, of Free and Back Street Crawler, favoured a 1959 Les Paul Standard. In 2011-12, Gibson’s Custom Shop made a reproduction of Kossoff’s Standard, featuring a so-called “green-lemon” flametop, two-piece carved maple top, mahogany body and neck, Custom Bucker humbucking pickups and kidney-bean shaped Grover tuners similar to those Kossoff had installed on the instrument. 100 Kossoff models were made to resemble the guitar at the time of Kossoff’s death in 1976, with another 250 in a VOS finish.
Some versions of the TG-64 had the same floating-table vibrato system as on the SD-4L; my guess would be that these were earlier versions, although one can’t place too much faith in dating Japanese guitars by hardware appointments. Others had the more typical Japanese version of the Bigsby vibrato. This guitar was sold in the United States in ’65 as the Teisco Del Rey Model ET-320, but by ’66 had been dropped from the line.
Here, the brighter/lower-value cap is engaged when the pot’s all the way up. As you roll it back, the larger cap is introduced, producing greater capacitance and a deeper treble cut. When you arrange caps in parallel, their total capacitance is the sum of their values. For example, I tried a .0047µF cap and a .047µF, so the minimum value is .0047µF (a very modest cut) and the maximum is approximately .052µF (a very dark tone).

One important thing about caring for a guitar is keeping the wood supple and moist, and quite often, you have to purchase a separate humidifier block with any guitar. Not this guitar, though. The Cordoba C12 comes with its own humidifier block right in the case. You just have to make sure you keep it moist every week. It is now ranked first on the best classical guitar list.
Yamaha is famous around the world for its incredible, quality, instruments. Its electric guitars are no exception. The Yamaha Pacifica Series PAC112V Electric Guitar, Old Violin Sunburst is another example of Yamaha's on point production. This guitar has a solid alder body, a maple bolt neck, rosewood fingerboard, and a five-position switch with coil tap. Plus there's the tremolo - a vintage tremolo with block saddles.

UPDATE 10/21: The good news first - I'm still absolutely loving the game and steadily improving. I'm only able to play about one to two hours a day, but even though that's all the time I'm able to put in, I'm already to the point of being able to play along with a song. But (here comes the downside), with my improvement audio lag has become a real issue. Before I was so horrible that I couldn't hit the right notes at all, let alone on time, so it didn't make much difference. But now that I've improved, it's a problem. To be fair, they warn you about this in the form of a pamphlet inside the game box, so it wasn't out of nowhere. I was just hoping that since I wasn't using HDMI, the lag wouldn't be too horrible. Wrong.

Here we have a well preserved vintage Hohner HW600n HW for Hohner Western Acoustic Dreadnought Martin D35 Style acoustic guitar. with a gorgeously grained THREE Piece Mahogany back and sides WoW its really a beauty. Workmanship Fit and finish quality is excellent this guitar is stunning, previously set up and is Great sounding in near mint like condition its from the late 80’s early 90’s D35 Look alike, Spruce top with Mahogany Neck and some of the absolutely highest grade Mahogany your going to see its flamed and figured and has fire and looks as if it could be Koa but listed as Mahogany at any rate this is one of the nicest models Hohner in this era truly a stunner,,, its in top structural shape as well its neck angle is excellent at 1-11/16ths at the nut its medium profile neck is very easily played and is a convertible c shape… We were impressed with her sound to with nice volume and a mature sounding tone. We think you’ll like this beautiful Vintage Hohner as well we believe this to be late 1980’s to early 90’s made in Korea and would fool any made in Japan fan for its fit and finish workmanship this is a good vintage guitar in its own right… no cracks no repairs no issues no excuses someone is going to have a smile on their face. any questions or to buy this guitar contact Joe at: .
We started finding that this type of construction leads to the neck bending (or bowing) after about 6 months. Unfortunately with the traditional method there is not an easy way to adjust it back to normal - once it is bent it's time to get a new guitar! This lead us to re design our classical guitars to use a truss rod. A truss rod is a much stronger example of the bar used in traditional manufacturing, but its main advantage is that it is adjustable. So if in the future you neck begins to bend it can easily be adjusted back into correct shape.

Another well established brand FMIC i.e. fender musical instrument company is widely recognized for manufacturing eminent guitars of superlative quality and texture. In India, the customers are satisfied form its products and won over millions of heart by providing brilliant guitar brands like FA – 100.So why waiting more? Quick make your purchase and enjoy the lovely music tone.

eyelet boards. Today BYOC leads the way in DIY FX kits for guitarists. With distribution in Canada, Europe, Australia, Great Britain, and Asia, and over 25 thousand kits sold worldwide, BYOC is a leader in DIY effects. And our goal has not changed – to bring guitar players a product that is more than just some DIY effects project that merely “works”, but a complete stompbox that will rival or surpass any of the big name boutique pedals on the market today.
The original switch configuration used from 1950 to 1952 allowed selection of neck pickup with treble tone cut in the first position (for a bassier sound), the neck pickup with its natural tone in the second position with no tone, and in the third switch position both pickups together with the neck pickup blended into the bridge, depending on the position of the second “tone” knob. The first knob functioned normally as a master volume control. This configuration did not have a true tone control knob.[2]

This question is one of those legendary analog vs. digital type debates. Many a forum war has been started around this topic. It’s typically a question asked by beginner and intermediate guitarists looking to get into effects. Given a budget, is it better to start a collection and buy a couple of individual effects, or get a single multi-fx unit? There’s not really one correct answer to this question one way or the other, since it largely matters on what your goals are.
Acoustic has never had much of a following amongst guitar players, but they made (original company out of business) some of the best bass amps that were ever made. Advanced solid state construction and creative speaker design finally gave bass players something besides Fenders lame sound and Ampegs wall of mud. To top it all, they are durable, ask my 30+ year old 360. Mosrite and Gibson basses and Acoustic amplifiers, life just doesn't get better.

The main difference between analog and digital delays is delay time and note clarity. Digital delays can produce multi second delay times whereas the Deluxe Memory Man offered a delay time of 550ms. Digital delay units also introduced the tap tempo function which is extremely useful when using delay as a rhythmic tool. There are many excellent companies producing excellent delay units, certainly a ground breaker was the Line 6 DL4 which is still popular today. Although I love the sound of a true analog delay, the latest offerings from companies like TC Electronics and Strymon offer so many options and analog emulation options it makes it a tough sell to stick with analog delays.
How does it sound, you ask? Guitarists generally agree that Line 6 tones are as good, if not better, than any digital sound out there from the likes of Boss and DigiTech. One really cool and intuitive thing is that the small display screen has a color-coded background depending on what type of effect you’re on. It’s a little thing, but such smart thinking from Line 6. Delays are green, Modulations are blue, Distortions are yellow, Filters are purple, and Reverbs are orange. Modulations and delays sound fantastic, and will stack up against a Line 6 DL4 or Boss DD-X box any day. Compressors, overdrives, fuzz, and distortions are usable but less than stellar, which unfortunately is the norm for digital effects. We actually tried using the Line 6 M5 with a solid-state amp, and the dirt effects sound much better going into that than they do into a tube amp (your milage may vary). Remember, this is not meant to replace your entire board. Over time, if distortion is your thing, you can get a dedicated analog distortion stompbox and keep the M5 for the other dozens of effects it does really well. For effects like volume and wah, you’ll be glad to know the M5 has an input for an expression pedal, which you’ll want to invest in if you care to use those types of effects (check out the EX-1 here if you care to stick with Line 6). If you don’t feel like editing patches and want to jump right in, you get plenty of presets to scroll through (the two footswitches let you scroll up and down between patches). Some presets are a little outrageous, but with a little editing you can reel them in and make them more usable. And speaking of scrolling up and down through presets, at first we were disappointed that we had to scroll through all 100+ patches to find the ones we like. Turns out you can make a favorites list of up to 12, and scroll only through those. Again, we’re continually impressed by the little things on the M5.
Being in the entry level section of the market, the Blackstar ID:Core Stereo 20 V2 is meant to be an all-in-one practice rig complete with amp modeling and effects. But what makes it stand out is the use of two 5" speakers for a fuller stereo sound, which complements the amp's versatile voicing features. Speaking of voicing, this amp is loaded with 6 essential tones to play with, two variations of clean (warm and bright), crunch (normal and super) and overdrive (OD1 and OD2), which by themselves are enough to play most musical styles. But being from Blackstar, this amp is equipped with their ISF (Infinite Shape Feature) knob that lets you fine tune the voicing of the amp to your preference. In addition, the ID:Core Stereo 20 V2 comes with 12 built-in effects, covering essential modulation types, delays and reverbs, all of which add up to a portable amp that gives you a lot of tone options.
The guitarist and composer Francisco Tárrega (b. Vilareal, Spain in November 29, 1852-d. December 15, 1909) was one of the great guitar virtuosos and teachers and is considered the father of modern classical guitar playing. As professor of guitar at the conservatories of Madrid and Barcelona, he defined many elements of the modern classical technique and elevated the importance of the guitar in the classical music tradition.
Ibanez started off as a Japanese music company particularly focused towards producing copies of favorite guitars in America. Today, they have surpassed most firms by offering best quality products on their own. Being specifically directed towards the hard rock and metal players, Ibanez ensures to have something for players belonging to every genre.
The specs for this stripped-back Singlecut are identical to PRS's gloss Standards; the difference is in the paint - or, rather, the lack of it. Instead of that faster S2 gloss, here we have a nitrocellulose satin finish that doesn't bother with grain filler - you can easily see the body wood's grain and feel it on the neck - for a thinner finish, which will wear and age the harder you play it. Plus, thin finishes don't choke any vibrations or resonance. Along with the dot-only fingerboard inlays, this Satin Singlecut looks very workmanlike, but the build and parts still deliver the goods. The body is one-piece mahogany, the neck three-piece. The bridge is the USA Stoptail, the locking tuners, like the pickups, made in Korea to PRS specs. The pattern regular neck is a nice mainstream handful, and setup and intonation are, as ever, top-drawer. Mahogany guitars can be dark-sounding and here, yes, there's a throaty midrange focus, but a clean-edged ring and resonance that provides clarity and punch, much like the pickups that nail an almost P-90-ish sizzle and classic-rock poke. The four-control layout means there's plenty of adjustment, and the coil-splits on the tone controls add authentic single-coil cut. Clean, low, medium or high-gain, this one's a banker: the most rock-out, resonant blue-collar PRS we've ever played, and that's why it's one of the best electric guitars, especially at this price point.
i just started using this book never having played before and am finding it totally easy to follow. the friendly narrative guides the reader through every step, explaining the most simple of terms and concepts clearly and concisely. and yes, the CD is funky and you can play along with it more or less straight away AND sound good, which keeps you motivated.

Maple » Maple is usually used for sides and backs, because its low response rate and internal damping doesn't add coloration to the natural tone of the top wood. It produces a “dry” sound that emphasizes high-end tones. Its lower resonance makes it great for live settings, especially with a band, because it can still be heard through a mix of instruments with less feedback.

The device can be mounted on and removed quickly from almost any flat-backed acoustic guitar, using a system of magnetic rails. The ToneWood-Amp is designed for guitars with either a magnetic or piezo pickup (bridge or soundhole), but the team behind the device say they're also putting together a “Technician-Free” pickup bundle for those guitars without a pickup.

Keep It Reel: Perhaps because a humble tape echo was the first effect I ever owned, delay has always been my primary effect. Whether to liven up repetitive loops or add apparent complexity to simple solos, it's worth getting to grips with delay the old-fashioned way. This means daring to switch off MIDI sync and manually setting delay time, driving feedback to the brink of madness, or routing the pure delay output through equalisers, filters and so on. Many of today's digital delays allow you to darken the delay iterations, but there's no reason not to find your own method to achieve this: adding alternative colours and discovering your own favourite processes. I find precise, perfect digital delays can be rather generic and characterless — so the more I delve into additional treatments, the more interesting and organic the results are. Paul Nagle

From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.
Description: Body: Mahogany - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 1 Piece - Nut Width: 47.6mm - Fingerboard: Maple - Frets: 24, Jumbo - Inlay: Piranha Tooth - # of Strings: 7 - Scale Length: 26.5" (67cm) - Headstock: 7 In-Line - Bridge: Floyd Rose Special Tremolo - Cutaway: Double - Hardware: Jackson Tuners, Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Seymour Duncan Nazgul/Sentient - Pickup Configuration: H-H - String Instrument Finish: Bright Blue - Made In: America
Modeling pedals use a host of methods to make your guitar sound like it’s coming from a specific sound source. For example, there are many pedals out there that are designed to model the sound of classic amps. This allows you to plug your amp and pedal straight into a PA system or even a pair of headphones, while maintaining the characteristics of the amp the pedal is modeled after. This also helps you avoid having to carry your amp with you everywhere you go.
For many guitarists, the only thing better than a Gibson Les Paul is a vintage Gibson Les Paul. From stunning museum-quality pieces from the '50s to road warrior axes from the Norlin era of Gibson production in the '70s, there are fresh Les Pauls added to this page every day including Les Paul Standards, Customs, Juniors, and more. Whether you're a veteran Gibson collector or a new inductee to the ranks of Les Paul fandom, you can find your next vintage LP here.
I bought mine used in 1989 in a mom and pop music store in the North GA mountains in Cumming GA and have loved it everysence I Know very little about it except that I would not trade it for a new one. The sustain in the body of the overtone note is fantastic and rare to find.I use d'Addario phosphorus bronze strings 11 - 52 and would not change anything about this guitar,fantastic!!! Thanks Victor

CALIFORNIA SPECIAL models mix no-compromise attitude with top-notch build quality and sound. Optimized bracing reduces mass for superior resonance, while the upgraded bone nut and saddle grant them exceptional sustain. Featuring all-solid construction, the fully-painted solid Sitka spruce top and matching 6-in-line headstock give the models a shot of electrifying attitude and unconventional Fender style that loves to be both seen and heard.

In addition to the 1/4" input for your guitar, you may want to consider amps with better connectivity features like those with built-in USB output for direct recording, footswitch input, aux input for jamming with tracks, and headphone output. Speaking of headphone out, there are some amps that come with built-in speaker cabinet simulated outputs, this subtly changes the resulting sound much like the amp cabinet would without having to actually use the speaker. There are also a number of newer guitar amplifiers that come with Bluetooth connectivity for streaming audio and for software control.
Jackson is yet another brand among the best electric guitar brands satisfying the needs of metal players. In fact, around three decades ago, back in the ’80s, Jackson guitars were the favorite ones for all metal and hard rock players in the world. Even today, the legacy continues as we see these guitars trending among the fans. Notably, the models like Kelly, King V, Soloist, Dinky, and Rhoads still rule the realm of guitars for their outstanding performance and tone.
Dave Friedman (Rack System, Ltd.): “Pedal order is a very subjective thing, and I’ve had people do it all backwards because that’s the way they like it. Generally speaking, compressors come before overdrives, modulation things are kind of in the middle, and delays are at the end. The wah is kind of a personal preference. Sometimes it’s in front early in the chain, and sometimes it’s after overdrives.
The ’37 Hawaiian Guitar in both the Sorkin and Grossman books was basically the same squarish, pear-shaped guitar as in ’36, sans pickguard. It had a polished Ebonoid fingerboard with new parallelogram position markers replacing the old dots. Also, the large, two-part rectangular pickup cover/tail assembly was replaced with a more conventional, modern design. The pickup cover was the new rectangular type with the two pole extensions exposed. Off to the side of its surround was a little square plate on the treble side containing the volume control. The strings attached to a small piece of slotted metal hidden under a rectangular cover or “handrest.” Gone were the control wings. The microphone attachment stuck out the bass side of the guitar. The cost was $35, plus $6 for a case.
{ "name": "Antique Yellow Sunburst", "skuUrl": "/Ibanez/Artstar-AS153-Semi-Hollow-Electric-Guitar-Antique-Yellow-Sunburst-1352132365026.gc", "status": "backorderable", "statusText": "Back Order", "skuItemType": "New", "inventoryText": "Available 11-21-2018", "inventoryKey": "available_date", "availableDate": "11-21-2018", "price": 999.99, "isOnSale": false, "msrp": 1377.76, "salePrice": 999.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $49 back in rewards Valid through,999.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "999", "decimalValue": "99", "listPrice": 999.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 377.77, "discountPercentage": 27, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51352132365026", "shipToStore": false, "displaySku": "H91419000001000", "displayId": "1352132365026   POS #: 108591264", "serialized": false, "stickerDesc":"Top Rated", "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/H91419000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-28-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Artstar AS153 Semi-Hollow Electric Guitar Antique Yellow Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"637145126000", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }

Death By Audio Reverberation Machine Spring type Reverb/synthetic atmosphere creator with Altitude control that allows the reverb to distort. Also has a light/dark switch to control color of the reverb. Pedal was used in a smoke free studio, never gigged and has no velco on bottom. Pedal has small speckled blemishes in paint next to volume knob. This has no effect on function. Pedal is in perfect working order. This is a great pedal for people who want to add more texture to their sound. Ive used it on synths, drum machines and samples- handles any source without discretion. The only reason for letting it go is that i have too many spring type reverbs. Thanks for looking .
They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton

The materials and the methods of classical guitar construction may vary, but the typical shape is either modern classical guitar or that historic classical guitar similar to the early romantic guitars of France and Italy. Classical guitar strings once made of gut are now made of such polymers as nylon, with fine wire wound about the acoustically lower (bass side) strings.

I disagree about Martin being THE BEST ACOUSTIC GUITAR. While Martin is an excellent guitar that is definitely ONE of the best! Taylor is THE BEST FOR THE HIGHER END TO MID PRICE RANGE! A decent TAYLOR will bea Taylor will beat the brakes off a brakes off the same Martin, because they SOUND BETTER and they can be used for more than one or two styles. If you are playing county music the Martin is better, but Taylor will play a lot better sound way better on every other kind of music styl! Buy a TAYLOR
Guitar has a vicious tone, nice wood, great p[ickups. However the guitar I received has a problem with the volume control acting as a tone knob and also cuts out sometimes. The guitar chord had to be replaced because it was cheap and cut out like a bad phone chord. I have to take it in to a local guitar shop and have the volume control fixed. Not too expensive but some additional cost. I didn't want to send it back as I otherwise love the guitar and didn't want them to send me a different one rather than just repairing it. Plus I don't want to wait that long. But certainly a great guitar for the money. No question.
I think the best is at DiGiSTORMERS :: Online Music Studio - Home digistormers website and there is an acoustic guitar vsti which sounds like the real one in the products plugins section. I never use anything else. I used to record live guitars, but using this it is not needed anymore. Also mistakes are recorded!!! It is not perfect then, so it sounds more realistic.

One of the best defining features of Schecter guitars is their build quality. It seems that they always go an extra mile. Schecter’s bodies are solid, made of great tonewood depending on the application, and the array of finishes they offer are just impressive. In simple terms, build quality is not something you need to worry about with this brand.

I've been playing guitar for several years now so I have played a wide variety of instruments. Of course bigger companies such as Martin or Taylor are going to be higher up in the ratings because they produce very expensive guitars and their name has been widely spread. My first ever Yamaha six string, which after three years is still my favorite guitar, is amazing. Its deep and rich tones makes it a blast to play. I can find myself playing any genre for hours because of how reliable and durable it is. They are very well priced for there quality and I would label Yamaha as being the working mans guitar.
In the ever-changing world of jazz music, you shouldn’t be surprised to hear of some big changes to the jazz guitar market either! To reflect this we’ve tweaked our chart, removing a couple of models such as the Ibanez AF95FB and the D’Angelico EXL101, and adding five new six-strings. These comprise the faithfully reproduced Epiphone Masterbilt Zenith Classic and the thinbody LH-302T from The Loar. In the semi-hollow section, we added the Ibanez AM93AYS Artcore Expressionist and the beautiful Hagstrom Tremar Viking Deluxe, while the solid-body section saw the arrival of Fender’s Classic Player Jazzmaster Special.
FINISH DRILLING THE HOLES After you have shaped and carved the body and the neck holes are drilled and the cavities routed out, you can preposition all of you parts and drill the last of the holes. Start with the pickup rings. It is good to assemble them first and then drop them into the cavity so you can line them up and mark where you will need to drill. Make sure they aren't crooked when you line them up. I like to have the neck bolted on so I can line them up with it. I do the same thing with the bridge. Be sure to check that the scale length is correct and that it is lined up with the neck as well. Drill the holes for the mounting screws and then the string through holes. Try to keep the drill as straight as possible when you do this because you will be going all the way through the body and if they aren't straight you will see it on the other side. This is the time that I wish I had a drill press.
The world is full of amps. It is so full of them in fact that it is somehow hard to choose not because there is not enough good ones, but too many of them. Which is very unfortunate, as it raises the entry level requirement for understanding what you are buying. This means that a whole lot of people get intimidated when trying to pick an amp. Like if they want a mini amp that they would want to carry with them when they go somewhere. Which is why I sat myself down the other day, bargaining all the while, and compiled a list of the best small guitar amps, for the sake of all the big musicians trying to play them. Hopefully at least some of you will find it more or less useful, since I had to categorize these according to price, sound quality, tone quality, comfort of use and even the general usefulness. What I am trying to say is, it was a lot of work.
Don’t feel like you have to spend a fortune either. While there are some very pricey boutique pedals on the market that get outstanding reviews, there are also affordable pedals that will do the job just fine. Consider brands like Boss, DOD and MXR for some great pedals at affordable prices. If you end up with a pedal you don’t like as much as you thought you would, you can always trade it in and get something different.

As both the British invasion and the 1960s came to an end, Rickenbacker guitars fell somewhat out of fashion; however Rickenbacker basses remained highly in favor through the 1970s and on. Perhaps as an echo of the past, during the late 1970s and early 1980s, Rickenbacker guitars experienced a renaissance as manyNew Wave and jangle pop groups began to use them.
It can get a bit difficult trying to properly depict certain aspects of effects pedals to our newer musicians out there since much of music tends to be described in an intangible sort of manner which relies heavily the assumption of prior knowledge and personal tastes which is why we try our best to not get the pros out there the meat of the information they are looking for, but describe it in a way that players of even entry levels can comprehend. So with that in mind, one of the more complex aspects of effects pedals for newer musicians is their implementation of a signal chain.
There are no frills: a single channel controlled with a Volume, Tone and Gain knob. You can switch between 15 and 7 watts, and don’t forget that for an all-tube amp, that is a lot of volume! While not having effects may sound like a bummer, the stripped-down circuitry helps your guitar signal to maintain its purest tone. Simple, raw and with attitude, cool looks and a mere 5.5kg; be prepared to rattle your brain with an authentic “British” sound.
The Chapman ML2's classic, single-cut body, two chrome-plated humbuckers and a black pennant headstock that’s not a million miles away from Gibson’s Les Paul. But appearances can be deceptive: this instrument is a very different beast. Chapman pegs its weight at a relatively svelte 3.5kg, so it’s unlikely to see you turning over your salary to the chiropractor. It’s also heavily contoured with its cutaway and heel carved for easy access to the upper frets. It has a modern, satin-smooth C-profile neck, hewn from maple (another deviation from the LP blueprint) and glued neatly to the body. The 25" scale lends it a unique feel - and with 24 jumbo nickel frets, the ML2 Modern is hugely shreddable. Both pickups feature an Alnico V magnet at the heart (think tight low-end, brightness, a little less on the mids), but with a coil-split, accessed by pulling up on the master tone pot, you can split the signal of these humbuckers for some single-coil snap and sizzle. The ML2 Modern makes a good claim on being all things to all guitarists. With coils split or not, we love its tone. That bridge ’bucker really sings with some gain. While the neck pickup is a great ‘rhythm’ humbucker - articulate and dynamic. Whether you find the modernity in its versatility, or in a feel that’s more Jackson than Gibson, the ML2 Modern sure lives up to its name.

Finding spare parts for vintage guitars is not always easy. Manufacturers come and go, very often changing specifications throughout the course of a guitar's production; identifying exactly the right specification part can be very difficult indeed - but we aim to help you find the correct part for your instrument. We have many years experience in restoring vintage musical instruments: if you need help, please do get in contact.

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Blue

The Japanese guitar industry in the '60s and '70s followed an interesting trajectory. At first, Japanese factories were tasked with building cheap emulations of American designs. As time went on, their output grew more unique and bizarre due to a particular Japanese artistic flair combined with an impulse to out-do mainstream American guitars they were emulating. This resulted in wild models from the likes of Teisco which featured exaggerated body angles and totally unique finishes and pickup configurations. Moving into the mid-'70s, the craftsmanship found at Japanese factories like the Fujigen plant rivaled that found in the US. This ushered in the controversial "lawsuit era" where Japanese brands like Ibanez built extremely close replicas of Fender, Gibson and other guitar brands.
Lotus started with the elite league of Japanese craftsmen and initially made excellent Morris-branded guitars, but trying to keep up with the heavyweights such as Matsumoku Aria Pro II and Fuji-Gen Gakki Ibanez was difficult. Mismanagement and, especially, the inability to market their initial superb-quality guitars soon had Lotus' owners scrambling for cheaper labor, ending in India with poor quality and eventually no takers for their product, as Chinese and Indonesian guitar producers stepped up with instruments of comparable quality at similar prices.
Having said this, if it’s for a child under 12 we normally do recommend a nylon string as it’s easier for them to press the strings down. Some children can have tougher hands than others, so if you have a rough and tumble child, they mght be able to handle steel strings earlier than usual. Check out our buying guide for Choosing a Guitar for a Child for more information.
Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Here we have a real vintage Rare IBANEZ CONCORD beauty from the Golden Era of the Best Japanese Martin D41 style guitars period... This example is Ibanez Model #679 and is the Top of the Line and is an exact Martin copy and is a great " Law Suit " model from the era where Ibanez set out to make the best guitars worldwide period...Fit and finish even after 30 years it is simply superior it appears to be thin old school Nitrocellulose Lacquer finish, this guitar was constructed using the best woods very ornate intricate triple bindings with lots of beautiful inlaid abalone on the Brazilian Rosewood fretboard and the spruce top body WoW...please do have a very good look ...This example has employed the best exotic woods in its construction, The top looks to be solid no seam edge showing at sound hole some pick wear and looks solid, the sides & back also look the same on the inside and outside grain matches so again it looks to be solid?.... A high grade mahogany neck, Sitka spruce top, Choice Indian Rosewood sides & back, and what seems to be a beautiful Rich Chocolate brown Brazilian Jacaranda Rosewood fretboard with gorgeous abalone, frets show some wear lower several yet plays excellently all the way up with very good action and fast & plays easily...Neck width is a nice slim-med super comfortable 1-3/4" at the nut with no buzzing all the way up action is good set at 5/32nds @ 12th fret. This guitar has been well played and well taken care of and is a good professional grade instrument ready to record tonight. Cosmetically this is a 8.5 out of 10, A real vintage player that has not been abused at all yet has been lovingly well played its tone has richly mellowed with the years and only improved with its age and now after 30 years it shows this wonderful patina that can not be replicated that only comes with age, vintage is not for everyone some like it new we understand that this vintage Martin Copy Japanese Guitar however is not new or is it in mint condition yet it is very beautiful in vintage terms of mellowing with age and patina Wow this is for the TRUE VINTAGE LOVER... also you Ibanez Collectors of Japanese vintage. Its Sound is second to none it has nicely articulate lows with nicely contrasting bright highs and the mid-range has a good punch and ring when finger picked, full on sweet big tone when strumming open cords. This one is a real pleasure to play and is EZ on the eyes too. These are really great old classic guitars and are getting very difficult to find now in anywhere near this kind of vintage condition...its all original and the original tuners work very well with no need to change them out they are keeping the guitar tuned cracks or repairs non needed , excellent original neck set and angle, intonation is good. This Rare beauty is conservatively JVG condition rated at very good - excellent in a 30 year old Vintage guitar...amazing looks and tone & playability in a real vintage collectible that your not going to want to put down.. Every bit as good as the much more expensive Martin for a fraction of that. Any questions ask? .
Compressors also have the ability to increase the sustain of notes beyond sounds that are normally usable on the instrument; yet another reason the effect is a popular tool in the soloist’s arsenal. The tiniest signal can be normalized to the same amplitude of a fierce pick attack, and a trailing note will resonate at the exact same volume until the string stops inducing a signal on the pickup.
If you are interested in a more a price friendly model, it is recommendable that you give this model produced by Davison Guitars a good look. According to its manufacturer, the unit comes shipped with a handful of useful accessories such as a practice amp, a case, a strap cord and a very practical DVD that is said to help beginners play the instrument in no time.
Some solid-bodied guitars, such as the Gibson Les Paul Supreme, the PRS Singlecut, and the Fender Telecaster Thinline, among others, are built with hollows in the body. These hollows are designed specifically not to interfere with the critical bridge and string anchor point on the solid body. In the case of Gibson and PRS, these are called chambered bodies. The motivation for this may be to reduce weight, to achieve a semi-acoustic tone (see below) or both.[34][35][36]

Fender has a long history of building amplifiers, so much so that many of the amps we see today still mimic the look and aesthetics of the amps that they built many decades ago. You could also say that many of the amps we have today can trace their roots to the classic Fender amp design. Also impressive is the long list of Fender amplifier users which include Eric Clapton, Jerry Garcia, Brian Setzer, Neil Young, Stevie Ray Vaughn, Eddie Van Halen and many more. For a company with a long legacy and a massive line up of amplifiers, maintaining high rating across the board is quite the feat, but then again, this is to be expected from the company that helped shape the electric guitar sound that we know today. These days, Fender is well represented in the entire amplifier market, from entry level models with amp modeling, to premium modern reproductions of their iconic tube amps.
At first it sounds kind of like a buzzsaw, but after listening to the song, people usually have a hard time getting the catchy riff out of their heads. The best part? It's one of the most fun beginner guitar songs and anyone can play it! The riff is played entirely on one string, the A string and consists of only three notes. Fun fact, the riff was supposed to be a placeholder for a horns section, but they loved the fuzzy guitar tone so much they never got around to the horns.
Variable 2: Speaker configuration. In Clip 2 you hear cabinets with varying numbers of speakers. First comes the 1x12 sound of a midsized Fender combo amp. Next is a 2x12 Fender-style cabinet. After that is the distinctive sparkle of a tweed-era 4x10 Fender Bassman. The last phrase is a classic 4x12 Marshall stack with 25-watt Celestion Greenbacks. These sounds represent a single mic on a single speaker, yet you can differentiate single- and multi-speaker cabinets due to leakage from adjacent speakers.
This should give you an idea of when the majority of the production for any one model occured (majority meaning more than 5 instruments per year). Note this does not mean a model can not exist outside of these years - it certainly can. Just these are the years recorded by Martin in their ledgers. Note this list (for the most part) does not go past 1969.
In the early 1960s the Brothers Grim became the first American group use Vox Amplifiers. Joe Benaron, CEO of Warwick Electronics Inc. / Thomas Organ Company, the United States distributor of Vox, along with Bernard Stockly (London), importer of Challenge pianos to the United States, arranged for the boys to have full use of the tall Super AC 100 Vox amps (4×12" speakers). The solid-state version of this amp (known in the USA as the "Super Beatle") was produced to cash in on the Beatles-Vox affiliation, but was not nearly as successful as the valve AC30 and AC15 models.

The guitar sports an AAA flame maple top on a three-piece mahogany body, whose Translucent Black finish was picked by the man in the top hat himself. The iconic Firebird pickguard sits prominently on the axe, but this one features Slash’s “Skull & Top Hat” logo. The mahogany neck comes in a custom profile, too, which is rounded but slim enough for searing fretwork. A pau ferro fingerboard with trapezoid pearl inlays completes the cosmetic concerns on the axe.
Introducing the next stage in the evolution of the music game. Rocksmith, the first and only game where you can plug into any real guitar. Featuring gameplay that automatically adjusts to your personal ability and innovative game design that makes playing music visually intuitive, Rocksmith will engage experienced musicians as well as those who have never picked up a guitar in their life. You'll unlock mini games to hone specific skills. You'll be able to choose from a large catalog of songs in different styles including:Every copy of Rocksmith will include a revolutionary 1/4 inch USB cable that turns the guitar's signal from analog to digital, allowing it to be played through video game consoles. By plugging into your console, you'll develop real skills and real styles while playing absolutely real music.
But there are more questions – are you a beginner, or do you have 20 years playing experience under your belt? Are you on a tight budget, or is money no object? Do you prefer funk, or are you a full-on metalhead? Somewhere the perfect guitar is waiting for you, and – with hundreds of reviews on this site – chances are we have featured it on these pages!
So the most likely answer here is to increase the height of that side of the bridge a little. This may mean the 5th and 4th strings are a little higher than absolutely necessary, but it's always about compromise with these things (unless you want to individually file down the heights of each of the saddles, but I'd advise against doing that until you really know what you're doing).
The very first production electric guitar was the Stromberg Electro, developed by Hank Kuhrmeyer and introduced in 1928. It was pretty much a kludge. It was an acoustic guitar with a magnetic pickup fitted to the soundboard... Stromberg/Kay Instruments made a resonator version of this, too. The weight of the pickup, though, destroyed the guitar's soundboard over time.

A significant cosmetic change occurred in Japan in ’65, which can help determine dates. Previously, almost all models had plastic pickguards. In ’65, most models switched to striped metal guards, with the alternating matte stripes etched into the metal. Thus, if you find a guitar Teisco with a plastic guard, it’s probably from ’64 or early ’65. If it has a striped metal guard, it’s probably from ’65 or later.
Last fall, Ubisoft released a new version. But Rocksmith 2014 is considered a replacement rather than an update: The company is trying to rebrand the franchise not as a game but as a teaching tool. The box bears a fat label proclaiming "The fastest way to learn guitar," and Ubisoft launched an ad campaign promising that Rocksmith 2014 could teach prospective shredders to play guitar or bass in just 60 days.
My sound is pretty clean with no overdrives or distortion. Besides a tuner and a volume pedal, I use a delay and a reverb pedal (TC Electronics) and I have a freeze pedal as well (EH Superego). I’m never sure if the freeze pedal should come before or after the delay and reverb. By trying both options I can’t really hear a difference in the overall sound which I guess is fine. Any thoughts or recommendations are welcome.

Pedals of this template offer a sound that’s considered “natural,” “warm” and “tubey” partly by achieving smooth, symmetrical clipping, and partly by reining in harsher high harmonics that can result in sounds that are heard as jagged and spikey in other pedals. The truth is, opamps really don’t clip in the same way that tubes do, but they are manipulated in these designs to simulate a generally “tube-like” sound. Other early overdrive pedals were designed around discrete transistorized clipping and boosting circuits, though many leaned toward distortion units as properly defined, and added more artificiality to the sound—hence the Tube Screamers’ near-instant popularity when it was introduced.
That really depends on what you are going for. There are good arguments for before everything and right after the tuner, but also for after the distortion and before your modulation pedals. If you put yours right after the tuner in the front of your chain, you can equalize your guitar tone before it hits anything and adjust your pedals accordingly.
The custom pickup for the AZ was developed in collaboration with Seymour Duncan. The pickups feature a moderate output through Alnico-5 magnets to keep the clarity of the fundamental tone when using a distortion sound, and to deliver a clear pick attack. From treble to bass, and from high-E string to low-E string, the overall tonal balance is evenly adjusted, and works well with various effect pedals.
Tube amp distortion is created when tubes are overdriven by receiving more juice than they can handle, thus causing the signal break up. Tube-driven amplifiers are still in demand by seasoned players because of the warm, musical tones they create, and some distortion-type effects use actual tubes to replicate that sound. But most distortion effects are produced either through analog solid-state circuitry or digitally.
After shaping your sound, is important to add some depth to it, and here’s where the ‘ambiance’ pedals find their way into your rig. The chorus effect should be used properly, without overdoing it, but can give great results: the depth and the ‘3 guitarists playing your part’ effect can work amazingly well for your music. Delay and Reverb can be used lightly, in order to enhance your sound and fill up your guitar solos with a little space (by setting up a nice spring or hall reverb settings and a dotted delay) or heavily, to achieve creative sounds where the sky is the only limit.

The top of the guitar has the greatest impact on the tone quality of the instrument. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. As discussed below under Tonewoods, the wood used for the top strongly influences the tonal characteristics of the guitar. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. That is why, as mentioned above, the larger the soundboard, the larger the sound.
{"product":{"id":"113884849","stock":"instock","price":"219.99","name":"Thunderbird IV Electric Bass Guitar","download":false,"sku_id":"113884849","checksum":"117352072023","rep_id":"site5113884849","displayId":"113884849","sku_display_id":"113884849","sku_rep_id":"site5113884849","gc_pro":false},"category":"Electric Bass","pageName":"product_detail","subcategory":"4 String Electric Bass","dept":"Bass"}

New to the music scene, and never one to stand on formality, I had a chance (multiple chances) to visit Grumpy's Guitars and Stuff, and was never anything but treated with respect, courtesy, and professionalism. My purpose for the visits were neither to buy, nor to have repaired, an instrument. It was to have the proprietor take a look at the bass that I had build. To give me his opinion and estimation on how I did. He walked through the process I'd used, for defretting, paint stripping, and then staining and poly sealing. Demonstrated how to adjust the truss rod, and complimented me on the work I'd done. All while setting aside his own work (A gorgeous early era hollow body electric Gibson.) I was charged a grand total of a great conversation for the tutoring and advice... Above and beyond! The selection of instruments was impressive -- and Grumpy's is the ONLY music/stringed instrument store I've entered in Albuquerque with not one, but 3 double basses, including an electric, and 2 classic uprights. Thanks for the great service, and awesome selection! I'll be by to have my '62 Fender Re-Issue pickups ordered through you, and to see about switching to a new brand of flatwound, when I break my next GHS.
Replacing pickup rings and restoring covers. These rings are usually plastic and cannot be restored but covers are normally metal on Les Paul styles. You may not want to rub steel wool across your covers so follow the method of cleaning painted bridges to avoid unwanted scratches. Also, replace your pickup rings properly with rings that are the same length and/or color and make sure the screw holes do not need to be resized.
TASTING NOTES: When you add a second speaker, tones acquire texture and detail due to the phase cancellations between speakers. Tones also get more diffuse, with rounder highs and softer focus. Note how the 4x12 Marshall configuration has a muscular low-mid thump that the Fender configurations lack. That’s due in part to the closed back of the Marshall cab.
A soldering iron is basically a tool that allows you to transfer heat that in turn melts the solder which is used to join two pieces of metal. The heat is supplied electrically (this wasn’t always the case) and the soldering iron itself will have an insulated handle protecting you from the heat generated. For some useful tips on best practice for soldering click here:
Here we are proud to have in stock today is a Cool one she's pretty rare too its a real vintage guitar its actually 42year old in fact. This is a great old Vintage Goya Acoustic Dreadnought Guitar by CF Martin & company. This guitar was built in the early 1970s in Japan when Martin had thought that it was a good way to address the Japanese high quality lower priced Japanese guitars cutting into their bottom line so Martin commissioned Goya of Japan to build their competitive to the US line "import" line ( Japan because no other country at that time was building anything close to the high quality guitars like Japan was making " China , India, Twain was not even a consideration Japan was in another league obviously to those countries... so Goya was commissioned back in the day this pre dates Sigma Japan... This was built durring the time frame when the Japanes builders had some of the best quality woods available to them and were setting out to show the world what they could really do. This is a great example with both fine quality qoods used from the high grade mahogany to the solid spruce top to the rich dark Brazilian rosewood looking fingerboards they selected wow impressive work...Kept in great shape all these years 42 years see the pics it looks more like its 3 years old then 42... here today for a song we believe this example was built in Nagoya by the great Terada, that is pretty much the Custom shop builders in Japan they are responsible for the GB10 George Benson Ibanez line, They made the high end Ibanez Artists, The Gretch reissues, some other fine models as well as their own Tereda guitars. On to this baby The top is book matched SOLID AAA Spruce and the sides and back are mahogany, probably laminated but they seam to match?. either way *AWESOME* The SB model has a beautiful transparent cherry sunburst finish that is still so glossy looking it can pass for much newer but its 36 years old!. The Neck is also solid AAA mahogany with a beautiful rich looking rosewood fingerboard may be Brazilian Rosewood . The neck is RARE with a nicely v shaped which feels really good to me I think you'll be please with the feel as well. Setup done by our in house luthier & plays like butta now with a new set of acoustic Martin 11's, a $150 value. Now how ya gonna beat that! .
If you're new to distortion and overdrive pedals, you might be wondering what the difference is between them. For the most part, they do the same thing and are both often referred to as gain pedals. How they differ is that distortion pedals usually provide a harsher, grittier tone with increased sustain. When it comes to distortion, think of genres like grunge and death metal. On the other hand, overdrive pedals are designed to emulate the sound of a tube amp when you increase their volume. The result is a warm yet crunchy sound that's ideal for playing blues and classic rock. Of course, one is not better than the other, and the right distortion or overdrive pedal for you will be a matter of personal preference.
Re-amping is another increasingly common production technique, often used at the mixdown stage. This process involves a dedicated re-amping device, which takes a line-level feed from a mixing console or DAW interface and converts that signal's level and impedance to one that a guitar amplifier is able to accept. That signal is usually a separate "dry" (unamplified and unprocessed) guitar track recorded using an active 500kOhm direct box placed between the guitar and the amp.
I had an Epi G400, MIK, I found for $175 used, in a pawn. It was decent enough enough but I found the pickups (humbuckers) a bit muddy. I subsequently picked up a Valkyrie II on closeout when they changed over to the current Valkyrie shape, for $99 + shipping. It played just as good but I was able to get one with P-90's, not available on the Epi. I preferred the P-90's and sold the Epi G400. I still have the Valkyrie:
Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.
The Effect:These pedals keep the original clarity of your sound intact, depending on how you tune it, you can use a little bit of overdrive, that adds some grit to the signal, with higher tuning you can get relatively more aggressive overdrive sound that’s still tame and if you push your overdrive pedal to the limits you might get a similar sound to that of a distortion pedal’s lower settings. A good overdrive (like the Ibanez TS9 Tube Screamer) is an essential solution for those of you wanting sound enhancement with lower interference, while having the option to add some aggression in your sound, but without taking it to extreme degrees.
Pickup adjustments are also very important, and I set the height of my pickups by ear. I typically like the bass side of each pickup to be a bit lower than the treble side, so the wound strings don’t overpower the treble strings. Also, strings generate more energy and volume in the area closer to the neck, so I typically set neck pickups lower than bridge pickups.
"That great Gretsch sound!" is the slogan of the company founded by Friedrich Gretsch in 1883. The company belongs to the oldest electric guitar manufacturers in the world. They created legendary archtop guitars, with or without Bigsby tremolo, like the White Falcon, the Country Club or the 6120 Chet Atkins. The rock 'n' roll boom in the 1950's allowed the brand to become a reference thanks to artists like Eddie Cochran or Bo Diddley. George Harrison ─ who bought a Duo Jet, a Tennessean and a Country Gentleman ─ became the brand's most famous endorser in the 1960's and put the brand under the spotlights once again. In 1967, Fred Gretsch Jr. sold the company to the Baldwin Piano Company and Gretsch started its twilight until it halted all production in 1981. Another Fred Gretsch (the nephew), bought the company back in 1989 and decided to open facilities in Japan and the USA to manufacture expensive products. Brian Setzer and his neo-rockabilly allowed the brand to rise again in popularity in the 1990's until Fender bought the company in 2002. Ever since, the manufacturing quality of the guitars has increased considerably and Gretsch is now back again as a major player in the guitar market.
To answer your question directly, yes, but only from a strictly physical point of view. According to guitar enthusiasts, electric units are easier to handle than their counterparts. The main motif for this has to do with the fact that the acoustic models come equipped with what many describe as heavier gauge strings. Because of this feature, their strings are more difficult to pick and press down.
The transformer matches the impedance of the driver amplifer to the reverb driver coil and allows a dual phase driving signal to power a reverb coil with one grounded side. The transformer is a standard "70 volt" audio line transformer that is often found on PA systems. One reader reported having good results using a Mouser 42TU013 (1K to 8 ohm) transformer. If you can find a reverb tank with a high impedance driver coil, the transformer may be eliminated, the driver coil will require isolation from ground.
For someone who’s been playing for a while, your options are a little different. Perhaps they’ve got a certain guitar in mind. If so, get them what they want! Chances are they’ve already done their homework and have their eye on their next guitar. If they’re not sure, you can still make an educated purchase. There are many popular options that should satisfy most experienced players. And there are many lesser-known models that can be the right fit for someone with more specific tastes.
Although electric guitar sounds vary dramatically, they are all essentially midrange instruments with little or no extreme high- and low-end information. With the tone controls on the amp and the guitar itself, recorded electric guitar sounds often need little in the way of EQ if the desired tone was produced at the recording stage. However, if the sound needs a bit more bite, try boosting the upper mids somewhere between 2.5 and 5kHz. For added warmth, a little boost around the 250Hz range should thicken the sound, while muddiness is often dealt with by cutting a few dBs at around the 200Hz mark.
Frank Bowers Interestingly enough, they have completely different approaches to the job. Bo cranks his Gibson Firebird straight through a Peavey 6505 half stack with nothing in line but a tuner, while Frank rocks out on his Gibson Les Paul Customs through a Digitech GSP-2101 preamp, a Mesa/Boogie TriAxis preamp, a TC Electronics G-Major processor, a Mesa/Boogie 2:90 power amp, and a Marshall 4x12 cabinet. During their show, they each take jaw-dropping solos, and they share the spotlight on some of the best-executed twin leads since Thin Lizzy’s “The Boys Are Back in Town.” 

It's a basic rule of physics (called Faraday's law) that a changing magnetic field produces electricity. So a guitar string will produce electricity only for as long as the magnetic field is changing—in other words, for only as long as the metal string is moving. Once the string stops vibrating, the sound stops. In that respect, an electric guitar is just like an acoustic one.
G&L is the evolution of Fender guitars, no doubt, is Leo Fender expressed by itself, amazing axe, nice sound, in tune, good wood, my ASAT SPECIAL have bird's eye wood on fretboard that looks and feels amazing, the MFD's pickups rocks! nice playability, nice sound, I'll keep mine a lot of a time, it must be on top 10, underrated guitar in my opinion
Most guitars will benefit from an annual setup, and instruments that are kept in less than ideal climate conditions (or that are on the road a lot) may need two per year. I’ll evaluate your guitar and make a recommendation. Setups may include truss rod lubrication and adjustment, saddle lowering to adjust action, nut slot adjustments, cleaning of grimy frets and fretboard, lubricating and tightening of tuners, and checking electronics and batteries. Price is based on what your guitar needs. The price range is for labor and does not include parts costs such as strings and bone nut and saddle blanks.
A guitarist’s or bassist’s effects chain can largely determine the uniqueness of that player’s tone. Perhaps the most common effects pedal is a distortion or overdrive pedal, which either provides a distorting effect or overdrives the guitar’s signal into the amplifier—a tone that is highly popular in many genres of music. Other popular effects pedals include a wah-wah pedal (designed for sweeping a guitar’s tone control), fuzz, delay, flanger, phaser, reverb, chorus, compression, looping and boost. Many guitarists also use an EQ pedal to further shape and customize their sound. With all the brands and effects available at Guitar Center, your effects pedal options are virtually endless.
The stars of the show are inarguably the pickups: the EMG Retro Active Hot 70 set, which goes for $200 alone. This combines a ceramic humbucker at the bridge and Alnico V humbucker at the neck—both open-coil—to produce the hot tones of Van Halen and other ’70s hard rock acts. They’re active pickups, too, wired to a FET preamp that minimizes noise and levels outputs.
© Frank Meyers and Drowning in Guitars, 2012-2017. Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Frank Meyers and Drowning in Guitars with appropriate and specific direction to the original content.
This is a great DVD, and Keith's style is very laid back, and easy to listen to. You can't help but like the guy, and once you start watching the DVD, you don't want to stop. He is extremely knowledgable, and it is like having an instructor right there with you. The DVD begins with the very basics, and works up to some quite complicated playing, so there would be something in this for everyone, from complete beginners (like me) to those looking for more challenges with their playing. For the price, I don't think you can go wrong.

The two piggyback guitar amps included the 1010 Guitar Amplification System ($605), which offered 10 tubes, 105 watts, two channels, four inputs, volume, bass, middle and treble controls for each channel, presence, reverb, tremolo, variable impedance, and a cabinet with eight 10″ Univox Special Design speakers with 10-ounce ceramic magnets and epoxy voice coils. The cabinet grille had eight round cutouts. The 1225 Guitar Amplifier System ($435) had eight tubes, 60 watts, two channels with the same controls as the 1010, and a cab with two 12″ Univox speakers with 20-ounce ALNICO magnets and 2″ voice coil. The grille had two large round cutouts with two small round cutouts on the sides. The amps had handles on the top, the cabs handles on the sides, to make life easier for your roadies.
Hey this really helped thanks but I've got a real problem with the high E string. Its still flat and I've turned the little piece around and its as far back as it can go and its still flat on the twelfth fret. I heard that new strings might solve the problem but I'm worried that it might not and that I'll have a real problem trying to get it to intonate correctly. Hope you can help thanks a lot for this post! :)
The company’s craftsmanship and innovation remain unmatched. Aside from their traditional ranges, Gibson also offers seriously high-tech instruments. This Mashable review of one of the brand's most revered models lauded not only its full-bodied tone but also Gibson’s penchant for taking risks. Its modern-take-on-an-old-icon kind of thinking allows it to constantly raise the bar—and the prices too, unfortunately.
{ "thumbImageID": "Les-Paul-SL-Electric-Guitar-Turquoise/K35586000004000", "defaultDisplayName": "Epiphone Les Paul SL Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage Sunburst", "sku": "sku:site51500000137033", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Vintage-Sunburst-1500000137033.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Vintage-Sunburst/K35586000005000", "brandName": "Epiphone", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Turquoise", "sku": "sku:site51500000137036", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Turquoise-1500000137036.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Turquoise/K35586000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000137035", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Ebony-1500000137035.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Ebony/K35586000006000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pacific Blue", "sku": "sku:site51500000137037", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Pacific-Blue-1500000137037.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Pacific-Blue/K35586000002000", "brandName": "Epiphone", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Heritage Cherry Sunburst", "sku": "sku:site51500000137034", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Heritage-Cherry-Sunburst-1500000137034.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Heritage-Cherry-Sunburst/K35586000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural Yellow Sun", "sku": "sku:site51500000137032", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Natural-Yellow-Sun-1500000137032.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Natural-Yellow-Sun/K35586000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

My services include re-frets, fret dressing, fret end dressing, action adjustment, truss rod adjustment, intonation setting, nut replacement, bridge saddle replacement, acoustic pickup installation, electric pickup fitting/replacement, output jack replacement, pot replacement, re-wiring, sound post setting, tuner installation, brace re-gluing, broken headstock repairs, strap pin installation, re-strings, bridge setting, tremolo setting, Floyd Rose setting, custom scratch plate cutting, tuning problems, restoration, polishing, cleaning, wiring modifications...Get in touch I'm sure I can help!
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
After the success of the DD-500, RV-500 and MD-500 units, Boss's GT-1000 is a floorboard combining all three. Sleek and modern, it's a formidably robust beast. To the rear, there’s the usual array of inputs and outputs, including USB recording out and an input for an additional expression pedal plus jacks to insert two mono pedals, or one stereo external pedal and a nifty send for amp channel-switching. In terms of editing, it’s not the most intuitive. For example, when you switch between patches in a bank, you’re not just turning off, say, a ‘Tube Screamer’, but switching to a different chain that doesn’t have a gain block - standard in rack-style processing, but tough for beginners. Sounds-wise, the 32-bit, 96khz sampling finds the GT-1000 punching above its weight, and on the effects side, there’s a wealth of modulations, delays, reverbs and drives. If you run a larger, more traditional pedalboard, perhaps the so-called ‘Bossfecta’ of the MD, RV and DD 500-series units would provide more flexibility, but for most players, the GT-1000 is a highly practical solution. 

The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").

Paul Reed Smith’s offering to pro musicians with exacting standards, the PRS McCarty 594 takes its name from two things. The first is its scale length of 24.594 inches and the second is that it’s a 1959-spec guitar with four knobs. According to Paul Reed Smith, this vintage-inspired instrument aims to recreate the most desired classic Gibson tone, that of a ‘59 Sunburst.
This guitar is one of the more affordable left-handed variants that you will find on the market. With a 41-inch body and a full-scale, you won’t find any limitations to the music you wish to play. The body is 3 inches thick which not only makes it comfortable to hold but also play. The cutaway gives you good access to higher frets while also increasing the appeal of the guitar.
Polytone Mega Brute, Jazz guitar amplifier fully functional. Has loads of clean head room but also has 3 settings: Warm, Edge and drive.  I think they’re rated and 65watts, into 8ohm 8” speaker. Super light and portable, approx. 22lbs. Probably from the mid ‘80s production. Hi and low gain inputs, bright switch, effects loop. Spring reverb. Mint condition and everything works like brand new. Shipped to the lower 48 for $50.00. Local pick up would be great. Return if unhappy but ship in same packing and also pay return shipping. Thanks  
The pedal rocks forward and backward like a see-saw as you rest your foot on it. Move the pedal to get the wah effect. On some pedals, there is a switch under the toe end to switch ceon straight-through (no effect) to using the wah effect. This means that when you switch it on, it's always in the "aaaa" position. You can hear this in some of Hendrix's work.
{ "thumbImageID": "MM100-Mini-Double-Cutaway-Electric-Guitar-Blood-Red/J37216000003000", "defaultDisplayName": "Mitchell MM100 Mini Double Cutaway Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blood Red", "sku": "sku:site51500000010548", "price": "79.99", "regularPrice": "99.99", "msrpPrice": "149.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MM100-Mini-Double-Cutaway-Electric-Guitar-Blood-Red-1500000010548.gc", "skuImageId": "MM100-Mini-Double-Cutaway-Electric-Guitar-Blood-Red/J37216000003000", "brandName": "Mitchell", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000010547", "price": "99.99", "regularPrice": "99.99", "msrpPrice": "149.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MM100-Mini-Double-Cutaway-Electric-Guitar-Black-1500000010547.gc", "skuImageId": "MM100-Mini-Double-Cutaway-Electric-Guitar-Black/J37216000002000", "brandName": "Mitchell", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut Stain", "sku": "sku:site51500000010546", "price": "99.99", "regularPrice": "99.99", "msrpPrice": "149.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MM100-Mini-Double-Cutaway-Electric-Guitar-Walnut-Stain-1500000010546.gc", "skuImageId": "MM100-Mini-Double-Cutaway-Electric-Guitar-Walnut-Stain/J37216000001000", "brandName": "Mitchell", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

But Zoom also served as the perfect foil for X’s principal songwriters, singer Exene Cervenka and bassist John Doe, who were arty, bohemian denizens of hip L.A. environs like Silverlake and Venice. Zoom was a politically conservative Christian greaser from the notoriously uncool southern L.A. suburbs of Orange County. In the now-classic L.A. punk documentary The Decline of Western Civilization, he is famously shown refusing to get a tattoo.
 Everybody needs to start somewhere. However, where you start often decides where you end up. For example, if you buy a bad guitar when you start playing, you are a lot more likely to stop playing, and if it happens, you wouldn't be buying any more guitars. We believe guitar manufacturers have a sort of duty to make and supply reliable guitars for beginners. Guitars at beginners' level are as important as high-end guitars for pro. This is where Smash comes in.
THE NECK POCKET The next step is to rout the neck pocket and body cavities. For the neck pocket I like to use a 1/4" bit and leave the scrap wood edge around the body to give the router the extra support it needs when routing the neck area. To find out how deep you will have to rout the pocket measure the total thickness of the heal of the neck. Then measure the hieght of the bridge from the bottom to the top of the groove the string will sit in on the saddle and add about 1/8" to it. That allows for the string clearence over the frets. The subtract that from the overall thickness that you came up with when you measured the heal of the neck. That will give you a pretty accurate depth that you will need to carve the pocket down to. Be very careful when you rout the neck pocket! You don't want to make it too big otherwise you end up with gaps between the neck and the body and you don't want to go too deep because it can be impossible to fix. Rout a little bit at a time, and set the neck in each time to make sure you get the proper fit. It shouldn't fit to tight and the pocket should be slightly lager than the heal of the neck because you will have paint accumulation in it which will shrink it a little.
Our first recommendation in this list is the epic Les Paul model by Epiphone. The Special II model of Epiphone is specially made for beginners. If you are just starting to play the guitar and looking for a good quality one from the trusted band, you can buy this one. This one is very low cost and offers a lot more features than other Gibson guitars.
Guitars by José Romanillos, Robert Bouchet, Daniel Friederich, Hermann Hauser I, Hermann Hauser II, David José Rubio, Dominique Field, Francisco Simplicio, Enrique Garcia, Pascual Viudes, Enrique Coll, Santos Hernandez, Domingo Esteso, Ignacio Fleta, Marcelo Barbero, Arcangel Fernandez, Hernandez y Aguado, Manuel Reyes, Enrico Bottelli and 1950's Ramirez.

We are going to start with a Fender amplifier. This Mustang I V2 is a 20-watt combo amp that has won over hearts of a lot of players because of its ease of use and versatility. With one channel that has 24 presets and eighteen amp models you won’t be scrambling for diversity. Apart from that, of course, you get some of the major controls like Gain, Volume, Treble, Bass, Master, Preset Select, Modulation Select, Delay/Reverb Select, Save, Exit and Tap Tempo. The size and price of this model really do not do it justice (I mean, don’t make it more pricey but still). You also will find that this amp features USB connectivity, chromatic tuner and black textured vinyl covering with silver grille cloth that accentuates the simple and elegant look of this model. While 20-watt, as you might know, is not much (unless it’s a tube amplifier) this baby is pretty great if you want it for practice.

Launched in the late 1990s the SE models are manufactured in South Korea by a third-party company (World Musical Instruments) then shipped to re-sellers and dealers in the United States. This is a major part of the cost-cutting technique, in addition to a more flat (as opposed to carved) body shape and cheaper pickups/electronics. So be advised, I’m not telling you that you’re getting a $2000 guitar for $600.
On guitars with bound fingerboards, shrinking of the binding can produce a gap large enough to catch the treble E string when pulling it over the edge. If only a few our present I will fill the gap to eliminate the problem. If the binding shrinkage has introduced gaps at every fret, the board should be re-radiused to eliminate all gaps and re-fretted.
{ "thumbImageID": "Elitist-1965-Casino-Vintage-Sunburst/518413000015000", "defaultDisplayName": "Epiphone Elitist 1965 Casino", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage Sunburst", "sku": "sku:site51275761455092", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "3,665.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Elitist-1965-Casino-Vintage-Sunburst-1275761455092.gc", "skuImageId": "Elitist-1965-Casino-Vintage-Sunburst/518413000015000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51275761455102", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "3,665.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Elitist-1965-Casino-Natural-1275761455102.gc", "skuImageId": "Elitist-1965-Casino-Natural/518413000010000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Fishing some thin wires through the jack holes from outside can work. I use stranded wire and strip the insulation from the end. I’ll divide the strands and wrap them around the pot shaft. It’s a delicate balance — you want enough ‘wrapping’ to grip the pot for pulling, but not enough to get in the way of getting the pot shaft through the mounting hole.

There are two types of acoustic guitar namely the steel-string acoustic guitar and the classical guitar. Steel-string acoustic guitars produce a metallic sound that is a distinctive component of a wide range of popular genres. Steel-string acoustic guitars are sometimes referred to as flat tops. The word top refers to the face or front of the guitar which is called the table. Classical guitars have a wider neck than steel-string guitars and are strung with nylon strings. They are primarily associated with the playing of the solo classical guitar repertoire. Classical guitars are sometimes referred to as Spanish guitars in recognition of their country of origin.
Guitar pedals are perfect for this. Firstly, and perhaps most importantly, because you should never try to circuit bend anything mains-powered, they can run off 9V batteries. Secondly, their internal circuitry is usually very simple, and they already have audio I/O. Thirdly, you can get them for almost no money from eBay, and the other tools required — soldering iron, wire, switches, and so on — are also very cheap. There's an almost infinite number of sonic possibilities to be explored here, from finding new ways to process a signal (of course you don't just have to use them with guitars) to creating a machine that goes 'Eeeeeeooooowsquelch blipipipip' in a different way every time you turn it on — and who would say no to that for less than a tenner?

Gibson’s electric guitars generally sport humbucker pickups, known for their thicker, rounder tone. You also get less feedback, which limits the types of delay and overdrive tones you can experiment with, but ensures a cleaner and more consistent sound. Gibson mainly uses mahogany for their guitar bodies, which is what gives it that slightly darker sound.
Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.
The reason being that guitar manufacturers will usually look to keep costs down in the pickup department. This is particularly true for budget models, which will usually be fitted with stock pickups that do the job, but fall short of truly impressing. So guitarists with an affordable, but playable guitar may wish to upgrade their pickups, to make their favorite axe gig-worthy.
If a bold vintage look and a big vintage sound gets you excited, the beautiful Art Deco-inspired BG-2500 from Blueridge will be right up your street. Taking inspiration from the historic Gibson J200, this high-end model sports a jumbo 21” body made from quality woods, with a fit and finish that ensures the BG-2500 feels worth the hefty sum of cash.
{"id": "H91419", "skuOrProductId": "H91419000001000", "categoryId":"site1AAH", "name":"Artstar AS153 Semi-Hollow Electric Guitar", "pageUrl":"/guitars/ibanez-artstar-as153-semi-hollow-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/ibanez-artstar-as153-semi-hollow-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place between "jazz-clean" all the way to "blues dirty." If you're aiming high, Ibanez has an ARTSTAR for you.", "value":"799.99", "priceMin":"799.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"27", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"22", "usedOrNew":"used", "discontinued":"0", "onOrder":"1", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1HBA,site1LFMIC,site1LAAA", "stickerText": "Top Rated", "checksum":"637145126000", "priceVisibility": "1"}
Every guitar player needs a great acoustic guitar – or several – in their collection. Finding the right acoustic guitar for you can be a daunting process even for the most seasoned player. If you are new to shopping for guitars, then it is even more critical that you learn all you can before you make your first purchase. If your first acoustic guitar is not the appropriate choice for you, then it can dramatically reduce the enjoyment you will get out of your instrument. If you are a new guitar player, the wrong guitar can be downright discouraging. You want a guitar that fits you, is effortless to play, and has the rich, beautiful tone you love to make it the instrument you dream of playing hour after hour.
Deco Tape Saturation & Doubletracker is a unique effects pedal that allows for a wide variety of tonal possibilities.  You can place Deco near the beginning of your signal chain and use the Tape Saturation as a light overdrive.  Or, you can place Deco at the end of your chain, use lower Tape Saturation settings, and provide your entire signal with the tape-like warmth, compression, and added low end harmonics.
The Epiphone Les Paul-100 Electric Guitar is another renowned guitar by the Epiphone Company. This guitar comes with 700T Humbucker pickups and the fretboard of the guitar is made out of rosewood. It has separate tone and volume controls to make it more user-friendly. The body of the Epiphone Les Paul-100 Electric Guitar is made from mahogany but has a maple top. It's thanks to the mahogany body that this guitar produces such a great sound. For a beginner, this instrument is a must-have.
Martin's OM, or "Orchestra Model", available from 1929 to 1933, has a rare combination of features. The joining of a long-scale (25.4") neck with a small body makes it an extremely responsive and playable guitar. In many ways the OM models were the first truly modern flattop guitars. They were the first Martins to have necks with 14 frets clear of the body. The OM has a wide neck (1 3/4" as opposed to the dreadnought's 1 11/16") which appeals to fingerstyle players. The string spacing is slightly greater at the bridge than on other models too, although not as wide as a classical guitars. The neck shape of old OMs is a bit unique too, although this is variable since each neck was handmade. OMs have a wide but thin backshaped V-shape which is very comfortable. Finally, the OM's smaller body size makes the guitar easy to hold, especially in the seated position. Compared this to the D dreadnought which is larger both in body depth and width (dreadnought players seem to use straps and stand up so the guitar's size is less of a factor).
The Japanese copy juggernaut got off to a fast start, and the second major Univox guitar was the Lucy, a lucite copy of the Ampeg Dan Armstrong, again produced by Arai, introduced in 1970. This guitar had a surprisingly thin bolt-on neck (especially compared to the Ampeg original) and a slightly smaller body. The fingerboard was rosewood with 24 frets and dot inlays. This had a fake rosewood masonite pickguard with volume, tone and three-way select. Like the Ampeg, the Lucy had a Danelectro-style bridge/tailpiece with little rosewood saddle. Unlike the Ampeg – which had Armstrong’s groovy slide-in epoxy-potted pickups – this version had a pair of the chrome/black insert pickups jammed together at the bridge. Other Japanese manufacturers also made copies of the Ampeg lucite guitar, notably carrying the Electra (St. Louis Music) and Ibanez (Elger/Hoshino) brand names, with versions of the slide-in pickups. In ’71, the Univox Lucy (UHS-1) was $275 including case. Just how long the Lucy remained available is unknown, but it probably did not outlive the original and was gone by ’73 or ’74.

All tube class A single end design Factory modded with premium components selected for optimum tone. This is Vox taking on the boutique guys and beating them at their own game. Lush rich 3D tone and with a classic Vox chime. Paired with an Alnico 2x12 and a reverb pedal you’ve got beautiful shimmering natural tone to die for. Boxed in excellent condition.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Molla principale Vite di arresto Blocco tremolo Barra di arresto Con la chitarra accordata con precisione, regolare la molla principale assicurandosi che la barra di arresto tocchi il blocco tremolo e la vite di arresto. Se la barra di arresto non tocca il blocco tremolo e la vite di arresto, ruotare la vite di regolazione della molla principale finché...
Every guitarist who bends or vibratoes a string to make it sing owes a debt to B.B. King. With influences as diverse as T-Bone Walker, Charlie Christian and Django Reinhardt, the late guitarist turned the blues world upside down in 1952 with “3 O’Clock Blues.” Almost overnight, the harmonica was supplanted as the primary solo instrument in blues, as guitarists scrambled to imitate B.B.’s soloing style, especially in Chicago.
There’s been a steady evolution in effects signal processing since the 1940s. Guitarist-innovator Les Paul was among the first and most avid effects developers, experimenting with echo and multi-track recording to add sonic excitement to his music. The first foot-switched effect showed up in the late ‘40s with Harry DeArmond’s Trem Tol tremolo processor that was later used by Bo Diddley. In the 1950s and early 1960s other effects were developed, but they tended to be expensive and some had operational issues. Meanwhile amplifier makers such as Fender and Gibson were building reverb and tremolo effects into their amps. These tube amps also produced tasty distortion and overdrive effects when gain and volume were cranked up to maximum settings. Today, many effects are designed to reproduce those sounds.
Large speaker cabinets such as 8x10" enclosures may have wheels and a "towel bar" and dolly wheels to facilitate transportation. Speaker cabinets with 1/4 input jacks typically have two parallel jacks, so that the amp head may be plugged into one cabinet, and then a second cabinet can be "daisy chained" by connecting it to the first cabinet. Cabinets with horn-loaded tweeters often have an attenuator knob for controlling the tweeter. Some 2000s-era speaker cabinets may have Speakon jacks; these jacks are often used with high-wattage amps, because they are safer, as the cable connections are hidden inside the connector and thus it is impossible for the user to touch the metal contacts when plugging in the amp cable.
JAZZ :Al Di Meola , John McLaughlin ,Wes Montgomery ,Pat Metheny ,John Scofield,Django Reinhardt ,Larry carlton ,Joe Pass,Herb Ellis ,Eddie Lang , and again I still have in mind at least 10 more jazz guitar players that jazz is the hardest and more complex guitar composition and it is an awesome style or kind of music to play just because not everybody play can play jazz.
Which got me to thinking about the history of American guitar companies. Many famous brands of guitars which started production here in the USA now exist as a name being used by an unrelated company for importing guitars into this country. Other brands are still being made but ownership has passed to one of a few big guitar companies. It’s difficult to trace this history without a “score card”.
YouTube has become well known for its tutorial videos and how-to clips on every subject on the planet and guitar lessons are no exception. Videos don’t provide the same kind of interactivity as our Uberchord app, which can listen through your device’s microphone and give you instant feedback on your playing. But we agree that YouTube clips can let you actually see and hear what’s going on—it can make a difference when things get confusing.
4) SPAM AND SELF-ADVERTISING ARE NOT ALLOWED. NO ADVERTISING YOUR NEW SUB. NO LINKS TO SOCIAL MEDIA, BLOGS, OR OTHER PERSONAL SITES. This includes the comment area of youtube videos as well as anything that's embedded into the video itself. Your content will be removed!!! NO ADVERTISING EVEN BY PROXY Ask yourself if you're here to post a video of yourself playing guitar or to gain subscribers/fans. If it's the later, you are in the wrong place. We are not here to make you more popular. This means no linking to anything that is commerce related, your blog, web site, bandcamp, facebook, instagram, snapchat, twitter, etc. You can link to your youtube channel, but do NOT have channel plugs/ads in your video, subscription requests, or links to any of the aforementioned, unless you are on our whitelist. If you would like to be considered for our whitelist, message the mods!
Augustino Lo Prinzi Guitars - Augustine Lo Prinzi has made more than 10,000 guitars and just started his 49th year as a guitar maker! Renowned throughout the instrument making field, Augustino LoPrinzi's first instruments were classic guitars. As his career progressed he constructed many types of string instruments, numbering in the thousands : mandolins, lutes, violins, and steel string guitars, to list but a few. Now he is applying these years of wisdom to his first love, the classic guitar, which began his journey into instrument making.
The easiest way to record bass is to just plug it straight into the console/interface—of course, using the correct instrument-level input or dedicated DI box, and not a standard line input. This will provide a nice, clean, deep tone, but it will likely lack the growl and grit that’s often desired—for that, you’ll want the sound of an amp. While you can always use a bass amp sim plug-in later, in the mix (see below), there’s nothing like the pants-flapping wall of low-end sound coming out of a real bass amp, if one is available. But most engineers will record both—a DI’d signal, and a miked-up amp. They can be combined later on, for the best of both worlds—the clean, round, depth from the DI, with the edge and midrange punch of the amp (but see below, for a caveat).

The SD is a classic. This had a more exaggerated Jazzmaster shape than the T-60. It had a dramatically swept back lower horn, and an offset pair of waists, looking as though it’s been slightly melted. These had bolt-on necks with the elongated Strat-style head, with round logo stickers. A rectangular plastic control panel was mounted above the strings, with large thumbwheel controls and on/off rocker switches, while a large-ish pickguard was mounted under the strings. The controls on the SD-4L were especially interesting, taking their cue from the Italians, no doubt. The thumbwheels were for volume and tone, while there were a total of six rocker switches. Four of these were on/off for each of the four pickups, but in between were two more. Their function is unknown, but a good guess would be phase reversal between the front and back pairs of pickups. Both models had the rectangular fingerboard edge inlays. With “L” designations, both had vibratos. These consisted of a fairly simple bar for string attachment with a series of springs behind it, all covered with a hinged metal cover. The handle was extremely long. Pickups were the beefy tall rectangular type with metal cases and black plastic center tops with exposed pole pieces (these could be screws or squares). The SD-4L had four pickups, in two pairs, while the SD-2L had two. If I couldn’t have a Spectrum 5, I’d be looking for one of these (I am!).
Silvertone starter pack is incredibly hard to beat. The candy blue finish gives the guitar a gorgeous aesthetic that looks fully professional. The pickup selector has 5 positions, and there are two tone knobs to give even more control over the sound. Stratocaster fans will love this guitar! Also included in the set is a gig bag, small Silvertone amp, strap, 5 picks, Allan wrenches, strings, a clip-on tuner, and a tremolo bar.
A friend lent me this banjo and I got it working and sampled it. Its a 5 string closed back banjo. The fifth string being tuned to a high "g" note (half the length of the neck). Its this string and the closed back that helps give you the bluegrass sound (the high string ringing the "g" note throughout each of the chords with syncopated fingerpicking patterns). This has a standard mapping with variations of long release (to hear the whole sample) and reverb.
{ "thumbImageID": "Sheraton-II-PRO-Electric-Guitar-Midnight-Sapphire/J25053000005000", "defaultDisplayName": "Epiphone Sheraton-II PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Sapphire", "sku": "sku:site51500000240440", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Midnight-Sapphire-1500000240440.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Midnight-Sapphire/J25053000005000", "brandName": "Epiphone", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51435592256803", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Natural-1435592256803.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Natural/J25053000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51435592256787", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Vintage-Sunburst-1435592256787.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Vintage-Sunburst/J25053000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51435592256739", "price": "549.99", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Ebony-1435592256739.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Ebony/J25053000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Red", "sku": "sku:site51435592256723", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Wine-Red-1435592256723.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Wine-Red/J25053000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
THIS IS THE ONLY WIRING GUIDE YOU WILL EVER NEED TO BUY. Learn step by step how to completely wire Telecaster, Stratocaster, Esquire, and Les Paul guitars and all of the potentiometers, capacitors, switches, ground wires, hot wires, pickups, output jack, and bridge ground. Even if you dont have a Fender or Gibson, this guide will teach you how to wire a guitar with 1, 2, or 3 pickups. Also learn where you can get the complete wiring kits for dirt cheap, and learn essential soldering tips. Why not learn how to change your pickups, tone or volume controls, switches, and capacitors yourself? There are a ton of modifications you can do to your guitar for dirt cheap. This book will also show you some secret "hot rod" techniques that the pros use. This book will teach you how to do coil tapping, coil cutting, phase switching, series wiring, parallel wiring, bridge-on switching, mini toggle switching, varitone switching, mega switching, yamaha switching, blend pots, and much more !!!
Naturally, you must also consider the Gibson Les Paul starter pack as well. Available from the consumer friendly Epiphone range, this player package is a great introduction to one of the most popular electric guitar models in the entire world. With 22 frets, dual humbuckers, and a gorgeous aesthetic with ebony finish and silver hardware, this is a knockout in every regard. The set is rounded out with the standard fare such as an amp, picks, a cable, a strap, and a tuner.
Generally, a band sounds the best to the audience when you have an attentive, knowledgeable sound person who is paid well by the band or venue. He also needs the right tools to balance the sound for the room. If all of the instruments onstage are blasting at full volume, the poor PA can’t keep up- and the people in the first few rows have their heads torn off by whatever instrument amplifier they are unlucky enough to be standing in front of. This results in an unbalanced mix that the sound person can’t fix. It might sound awesome onstage, but you want the audience to have a great experience too, right? With monitors, side fills, several amps/cabs, and a fort full of cymbals onstage, things get loud quickly, and everything competes for the same sonic space. It is easy for band members to get into ‘volume wars’ while the sound dude/dudette takes everyone out of the mix but the vocals right before they throw up their hands and shake their heads. The audience might not know what sonic problems are occurring, but they definitely will hear it. An audience member describing a gig like this to a friend might say, “I saw this band, but they sounded terrible.” No one wants that kind of review. We spend a lot of money on guitars, pedals, amps, and microphones. But many  musicians at the gig just set everything up and hope for the best. 
Mundt Music of Longview, LLC is your one stop guitar shop. Located at 2312 Judson Road, we have everything that you need whether you’re buying your first guitar or adding to your growing collection. Make sure to join us in store on October 10, 2016 at 6:30pm, for our “Taylor Road Show” event. Guests will enjoy an evening of guitar talk and demos with Taylor factory staff and guitar makers from El Cajon, CA. It’s an event that any guitar enthusiast won’t want to miss.
The only guitars that I have been able to find pictures of that have the little curly thingie on the headstocks have been Kents, Kawais and some kind of no-name guitar that looks like the factory took a red Kent 820 and sprayed black around the edges to create a “redburst” finish. The example above appears to has started as a regular sunburst finish with more red and black added. The neck, headstock, pickups, and body are identical to the Kent 820 except the name ‘Kent’ doesn’t appear on the guitar anywhere. Note that the hardware on it is the same as on the 820 shown. That bridge and tailpiece configuration is a little unusual for Kent 820s. (the 820 there is mine) The bridge and tailpiece on the Kent 823 is the more common configuration.
It is entirely possible with most guitars. Very rarely will there be a time you will be unable to achieve that same sound with a decent amp. So make sure you do get a quality amp─it doesn't have to be extremely pricey, just good enough. Always make sure your guitar has multiple pickups if you are planning to play different styles of music; it allows for more perfect fine-tuning.
The Yamaha APXT2 is a 3/4 size version of the world's best-selling acoustic-electric guitar, the APX500III. This well-constructed, compact guitar makes a great companion when you're on the road. The APXT2 features an ART-based pickup system and Yamaha's proprietary tuner, offering great sensitivity and accuracy for quick tuning. The APX T2 also includes a gig bag.
When making solder joints to switches and pots, the lug and wire should be heated by the tip of the iron and the solder pressed (or flowed) onto the joint. In this manner you can avoid cold solder joints as both components are properly heated prior to the application of solder. Melting solder on the tip of the iron does not insure the actual components are being heated properly.
Neither should you confuse acoustic-electric guitars with semi-acoustic hollow or semi-hollow instruments. Acoustic-electrics are acoustic guitars with onboard electronics that allows them to be amplified. They can be played just as well without plugging in. Semi-acoustics are electric guitars with some acoustic properties that are meant to be amplified when played.
As has already become apparent, the resonator instruments which made both the National and Dobro names in the late ’20s and ’30s were not the only effort underway to increase the volume of the guitar. The ampliphonics found immediate acceptance among Hawaiian players, notably Sol Hoopii, the very first to record with them when he used a prototype in his first session for Columbia on October 18, 1926. This was used on “Farewell Blues.” But they still didn’t satisfy the desire of orchestra guitarists to get out of the rhythm section. In addition to metal resonator cones, electricity was waiting in the wings, and National, Dobro and National Dobro would play a significant role, both directly and indirectly, in that ultimately triumphant development.
This processor is pretty good quality, unfortunately not too many parameters on the effects and you can only use one effect at a time, and some prefixed combo of 2 effects (if i remember correctly 10 different options). If you need it for reverb, or slight delay, tremolo or acoustic simulator its pretty cool, not able to add exact tempo on delay or tremolo though. Sound quality is very good, 24 bit A/D and D/A so no loss there either, and you also have stereo (same effect options on both though) and balanced and unbalanced outputs (if you use unbalanced the signal goes to both outputs so you also have the balanced output if needed). For the money is definitely the best option, imagine that a reverb pedal cost the same money (just reverb) if you have a controller it will fit on your gear. I am using it with ... full review
Throughout the 40’s, racial segregation was still in force across America, however within the music community, (both listeners and musicians) race boundaries were beginning to disappear. African American music (a.k.a ‘Race Music’) was popular with white communities too and with the vast melting pot of musical styles by that point including Folk, Country, Jazz and Delta blues, something exciting started to take shape.

These handpicked guitars represent the very highest-end when it comes to collector-grade, vintage instruments. Take a look at these stunning, investment-level guitars and basses from the golden eras of Fender, Gibson, Gretsch, Martin, Rickenbacker and more. These stunning specimens are the things of gearhead dreams, and even if you can't afford one today, there's still plenty of fun to be had perusing and exploring these iconic guitars.
This is the point where the neck meets the body. In the traditional Spanish neck joint the neck and block are one piece with the sides inserted into slots cut in the block. Other necks are built separately and joined to the body either with a dovetail joint, mortise or flush joint. These joints are usually glued and can be reinforced with mechanical fasteners. Recently many manufacturers use bolt on fasteners. Bolt on neck joints were once associated only with less expensive instruments but now some top manufacturers and hand builders are using variations of this method. Some people believed that the Spanish style one piece neck/block and glued dovetail necks have better sustain, but testing has failed to confirm this. While most traditional Spanish style builders use the one piece neck/heel block, Fleta, a prominent Spanish builder, used a dovetail joint due to the influence of his early training in violin making. One reason for the introduction of the mechanical joints was to make it easier to repair necks. This is more of a problem with steel string guitars than with nylon strings, which have about half the string tension. This is why nylon string guitars often don't include a truss rod either.
Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: Some great info on that site, you should have a browse around!

Recently I was in the market for a low watt 1x12 amp. My local music store had a good selection. I grouped an old Vox AC15, Fender Deluxe, Orange, and a PV around me. I used a PRS Custom 22 to try them out. After about an hour I decided on the Fender. The sales guy suggested I try one more amp. It was an Egater Rebel 20 head with an Egnater 1x12 cab. My reaction was instant! If you have not played one of these you owe it to yourself to check them out! I bought it and also a Rebel 30 1x12 Combo a few weeks later! They SING!
Most guitars and basses have one or more tone knobs, which offer a simple form of EQ control. Using these tone knobs adds or cuts the treble frequencies of the instrument’s signal. Most guitar and bass amps also have some tone control available, usually in the form of a 3-band EQ section, allowing you to control bass, mid, and treble frequencies with independent knobs. These knobs boost or cut frequencies when you turn them up or down. Some amps and effects offer more precise control of equalization as we’ll see next.
Now that you have made it through, if you chose to build a guitar, you are probably going to want to make more. Hopefully some of the info as well as links I have provided has helped to get you started in the right direction. Guitar building is fun and chalenging at the same time, and if your like me you will always want to improve your skills and find something else to try out on your next project. I have added some pictures of some of the guitars that I have made down at the bottom so you can see my progression. So here's to having fun and building a piece of art that you don't just have to look at. Though they do look good hung on a wall!
This is one of the most popular and oldest brands of acoustic guitars available in India. There are various brands and models of guitar available under the umbrella of Gibson Guitar Corporation. ES-335, SG, Flying V, and Firebird are one of the most iconic models of guitars produced by this brand and their classic acoustics include the hummingbird. These are ideal guitars that can be used by beginners made in – the USA. The price of Gibson 6-string guitars starts from 4,000 INR approximately.
At this time (and for a while now) the best guitars are made in Japan and Korea. However Japanese guitars carry a premium which you don’t find to the same degree on Korean guitars. So Korean guitars will offer the best value and quality for price. There is a Cort factory in Korea, however 1) The Korean Cort factory also makes entry level guitars and 2) Cort also have other factories in other countries which have much lower standards. There are some good/excellent Cort guitars but there are also many bad ones with shoddy workmanship. So Cort as a brand name isn’t enough to guarantee a well made instrument - you also need to check it’s made in Korea, and also that it’s one of the better models (price will probably be a guide). All the brands made at the largest factory, the World Instrument Co. one (which makes PRS SE and Chapman guitars among others) are built to a very high standard.

The steel-string beauty is crafted from solid Sitka spruce on the top, which features solid Indian rosewood back and sides, and a slim mahogany neck and rosewood fretboard. You’ll notice some impressive decoration on the BR-160 (as we mention in our full review), including an exclusive Dalmatian-style tortoiseshell pickguard, accurate 14:1 butterbean-style tuners, and an elaborately decorated motherof-pearl headstock.
Some Korean Ibanez serial numbers are purely numeric with no alphabetic characters. According to Jim Donahue these guitars were manufactured in the Cort factory, in which he had the supervision. Because they had no date stamps available when they started, the serials numbers of Artstar models in this factory were written by hand. These handwritten serial numbers are hard to decipher. The production of these Artstar models at the Cort factory was discontinued in 2003.
Here just in is a well crafted Japanese made Orville by Gibson J200 this is not a Gibson but is a copy of the Gibby by Orville Japan... So this would have been a sanctioned build and not the Lawsuit setting them apart from other makers like Alvarez and Ibanez and Aria and a few others in fact Orville is Mr. Gibson's first name Orville Gibson so This is NOT a Gibson but a very professionally built version of the J200 its an excellent high quality copy Beautifully crafted workmanship and amazing woods... must see... previous owner love this one so much they also had it professionally customized with its Grovers and logo in MOP... plays absolutely excellent with its low easy to play string action, and notice its old Gibson correct bridge with the ABR-1 type adjustable bridge for precise intonation adjustments over the 60's Gibson correct nylon saddles... nice touch... Its spruce top is really nicely grained and figured with beautiful Patina of the real vintage gibby.
If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
The specifications of the neck and string setup dictate the guitar's overall playability. As such, it is important to get a handle of important specs which include scale length (the length by which the string is stretched from the bridge saddle to the nut), nut width, fingerboard radius, and neck profile (shape of the back of the neck). Beginners normally want guitars to play easier, and will prefer those with shorter scale length, thin nut width and neck profile, and flatter fingerboard radius. On the other hand, experienced players will have grown accustomed to a specific neck configuration, if this is your case, you will want your new guitar to have similar specs to what you already like. 

As a rule, you don't add much, if any, reverb to low-frequency sounds, such as bass guitar or kick drums. Where you need to add reverb to these sources, short ambient space emulations usually work better than big washy reverbs, which tend to make things sound muddy. Taking this a step further, you can also make a mix sound less congested by EQ'ing some low end out of your reverbs.
I got this lyle acoustic (w-400) for $40 at a yard sale - it is THE MOST INCREDIBLE GUITAR you could ever ask for - looks just like a martin d-18 - solid spruce top - sweet figured mahog b&s's - back of headstock even has the valute like a martin - just kicks my buddies real d-18 to pieces - he's so jealous - if you get the chance to own one don't pass it up - it will probably be too cheap to pass up and you WILL regret it later (like I have been kicking my own ass for decades for passing up a 60's Gibson byrdland for $400)
Yamaha is likely a good place for acoustic players as well, as the company offers a number of solid entries in this category. Despite the friendly price, Yamaha consistently puts out quality instruments that feature not only sturdy construction, but sound quality good enough to give the big guys a run for their money. The FG800 is one of the best rated acoustic guitars out there, with a price tag that’s viable for just about any budget. Their acoustic guitar starter packs are great for beginners as well (5).
For a relatively new band, Dream State have - in industry parlance - gained some serious frigging traction, playing Reading/Leeds last year, gobbling up streams in the millions and signing to hardcore label par excellence UNFD. Lead guitarist Aled does a deft line in a tapped arpeggio, while breakthrough single White Lies covers a hell of a lot of ground in its four minute runtime - combining Marmozets’ urgency in its opening and Deftones’ dynamics at the close. 
Engl is not particularly famous among US guitarists, and even veterans in the field might be unfamiliar with this hard-to-pronounce name. A good shorthand to give you an idea of what they’re about is to make a mental list of the features most readily associated with German products: good manufacturing quality, reliability, an adequate level of innovation (but only when needed) and higher than average performance.
I wanna weigh in, I’m just an average player but having one of the best luthiers around and talking to them really gives you an idea of what quality your getting from a guitar. I play a martin DC 16gte, my singer plays a Chinese knock off Taylor. No one can tell the difference when he switched to the real genuine 314 CE Taylor (basically made the same way as the Chinese one), and we get no complaints about either guitar. Save your money, (buy quality) or buy the Chinese knock off and find it’s made the same and it will make you the same money playing and feel just as good in your hand as the 1000 dollar plus Taylor. Conclusions for Taylor or martin fans is don’t go name brand cause they (known or unknown) swear by them, is all personal preference, try everything in every price range find what’s right for you. My $750 DC 16gte Martin was right for me. My singer the 914ce Taylor Chinese knock off (327 bucks new) suits him better than his 1200 dollar original Taylor 314ce.
The playing of conventional chords is simplified by open tunings, which are especially popular in folk, blues guitar and non-Spanish classical guitar (such as English and Russian guitar). For example, the typical twelve-bar blues uses only three chords, each of which can be played (in every open tuning) by fretting six-strings with one finger. Open tunings are used especially for steel guitar and slide guitar. Open tunings allow one-finger chords to be played with greater consonance than do other tunings, which use equal temperament, at the cost of increasing the dissonance in other chords.
From 1986-1989, “Made in China” Squier Stratocasters carry the “Affinity” decal on the smaller ball of the headstock and have serial numbers as NCXXXX with the first number the year of manufacture, e.g. NC6XXX (Made in China 1986). NCXXXX is also used for Squier Strat Bullets of the same vintage. The Affinities are practically the same as the Japanese-made Squier Bullets of the mid-’80s; the same alder bodies, same rosewood-type fretboard and maple necks. Tuners and electronics are also very similar – not the best but distinctive in sound. Common modifications are more stable tuners, larger potentiometers, better capacitors, and pickups. They had single-ply 8-hole pick guards like the ’50s Fender Strats giving them a classic look. Colors were typically black, white and red.
Description: Black Finish Model. Body: Alder - Body Construction: Solid - Top Wood: Alder - Neck Attachment: Bolt - Neck Wood: Maple - Neck Construction: C-Shape - Nut Width: 42mm - Fingerboard: Maple - Frets: 21, Jumbo, Medium - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - Guitar Features: Pickguard - String Instrument Finish: Black - Made In: Mexico
pay is about HALF of what it should be for this expensive of a product, when a factory is turning out nearly $1 million a week in profits from one factory with less than 50 employees, they should make more than the salary cap of $12-$15 per hr, the only reason you make a decent living wage is because you work so much you don't have any time to live. You may have time to go home and sleep (and eat something, if you're VERY lucky, most days i don't even have the energy to wake up and eat once i get home.
@Timothy Chew – This really depends on the specs of your effect and volume pedals. A buffer should be placed 1) before long cable runs, 2) in front of low input impedance pedals, or 3) in front of many true bypass effects. If your volume pedal has a high input impedance, I would recommend placing it near the front of your signal chain. If the Volume pedal has a low input impedance, I would recommend placing it after the buffer. Again, this really depends on how you plan on using the volume pedal and whether the one you have has the right spec for that usage.
The looper is a little more limited and offers shorter loop time than its competitors (20-seconds), but hey, at least it has a looper. The inclusion of a USB means you can hook the DigiTech RP500 straight to your computer and start recording riffs and ideas. If you like, you can use the included Cubase LE software for all your recording needs. Furthermore, just like with the other pedals on our list, you can manage and adjust your presets from the provided X-Edit Editor/Librarian software, which is quicker and easier than scrolling through the menus on the unit itself. The DigiTech website has a pretty extensive Tone Library, where you can download and use a bunch of patches.
Fuzz was originally intended to recreate the classic 1960's tone of an overdriven tube amp combined with torn speaker cones. Oldschool guitar players (like Link Wray) (citation needed) would use a screwdriver to poke several holes through the paperboard part of the guitar amp speaker to achieve a similar sound. Since the original designs, more extreme fuzz pedals have been designed and produced, incorporating octave-up effects, oscillation, gating, and greater amounts of distortion.

Electric guitars were originally designed by acoustic guitar makers and instrument manufacturers. Some of the earliest electric guitars adapted hollow-bodied acoustic instruments and used tungsten pickups. The first electrically amplified guitar was designed in 1931 by George Beauchamp, the general manager of the National Guitar Corporation, with Paul Barth, who was vice president.[3] The maple body prototype for the one-piece cast aluminium "frying pan" was built by Harry Watson, factory superintendent of the National Guitar Corporation.[3] Commercial production began in late summer of 1932 by the Ro-Pat-In Corporation (Electro-Patent-Instrument Company), in Los Angeles,[4][5] a partnership of Beauchamp, Adolph Rickenbacker (originally Rickenbacher), and Paul Barth.[6] In 1934, the company was renamed the Rickenbacker Electro Stringed Instrument Company. In that year Beauchamp applied for a United States patent for an Electrical Stringed Musical Instrument and the patent was later issued in 1937.[7][8][9][10]