The Zoom G3X features a built-in wah-wah expression pedal that controls the sound parameters in real time. It has over 100 effects and 22-amp models that bring out the amazing sounds of your guitar. This distortion pedal also features a stompbox with over 100 stage-ready effects. For computer recording, this pedal has a USB audio interface for Mac and PC. In addition, it has a balanced line-level output, an onboard chromatic tuner, and an integrated drum machine. Its 40-second looper gives it overdubbing capabilities.
There is a beauty to the guitar-cable-amp approach. It doesn’t get any easier, unless you take up playing the flute. And the lack of toys to mess with will certainly make you focus on playing more. By changing your pick attack, vibrato, or the volume and tone controls on your guitar—you’ll rely on your hands instead of stepping on a box to change tones. I believe it’s beneficial for all of us to just plug straight in at least once in awhile and rock out with unadulterated tone.
A simple, inexpensive amplifier may have only two tone controls, a passive bass and treble control. In some better quality amps, one or more midrange controls are provided. On the most expensive amps, there may be shelving equalizers for bass and treble, a number of mid-range controls (e.g., low mid, mid and high mid), and a graphic equalizer or parametric equalizer. The amplifier's master volume control restricts the amount of signal permitted through to the driver stage and the power amplifier. When using a power attenuator with a tube amplifier, the master volume no longer acts as the master volume control. Instead, the power attenuator's attenuation control controls the power delivered to the speaker, and the amplifier's master volume control determines the amount of power-tube distortion. Power-supply based power reduction is controlled by a knob on the tube power amp, variously labeled "wattage", "power", "scale", "power scale", or "power dampening".
The Tone knob is basically a filter to cut highs. And, once again, the pickup will sound best when turning it all the way up. With the ever-growing amount of effects amps have to offer and those available in pedal format, we often forget that this setting even exists. This basic control allows you to, for example, smoothen a jazzy sound or choke a way-too-shrilling fuzz, or anything else in that line that comes to your mind. Only your ears can tell if the sound is convincing or not!
I know a lot of you out there fancy yourself as “tinkerers”, and many of you may actually be quite good at handling repair work to your own instruments, but I’ve always been more of the kind who loves to find a good repair person. Number one, if the repairer doesn’t do the right job, or there are problems with the work they did, they have to own up to it, and make sure it’s done right until you are fully satisfied. Then of course, if they are actually a selected and accredited repair person for a given guitar company, it’s even better to bring them the guitar, rather than trying to take matters into your own hands.
The Ibanez Artwood AW54 is easily the best bang-per-buck all-mahogany-body dreadnought in the market, for the price you are getting an acoustic with solid mahogany top, back and sides. I am definitely envious of students who have this as their first guitar, with its impressive specs and genuine vintage appeal. And it's not just for newbies, because experienced players appreciate the articulation and warm tones of this all-solid mahogany body guitar.
{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Once you've mastered a few songs on the guitar, you may want to record what you can do so others can hear you shred a wicked solo. Or you may want to use your recording to help improve your skills. In either case, recording your electric guitar outside of a studio can result in poor sound quality that is less than desirable or noise complaints. Depending on your situation and equipment, there are many factors you'll likely have to tweak on your way to getting the best recording, but with a little effort, you'll soon be able to listen to an awesome recording of your musical ability.
Shimming a neck: The best shims are one piece and the full size of the neck pocket. For this veneer from the hardware store works well. However, it is very hard to get an even taper on these. The next best option is to use masking tape. Masking tape is paper which is wood fiber so it's almost as good as a solid shim, and much better than the smaller shims which leave large gaps which impedes the transfer of vibration, and could cause problems later on. To make a tape shim, lay strips of tape side by side perpendicular to neck, and add layers to provide the taper. i.e. stripe 1- 1 layer, stripe 2- 2 layers, stripe 3- 3 layers. Place the neck in the pocket, mark outline of pocket, and trim just inside outline.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 48mm - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Dot - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 7 In-Line - Bridge: Edge Zero II - Cutaway: Double - Hardware: Chrome - Pickups: DiMarzio - Pickup Configuration: H-H - String Instrument Finish: Black - Made In: Japan
In choosing an amp you have to first consider how much you have to spend, the style of music you like to play, and what kind of tone you like best. It is perhaps best to start with something small. You might feel that a Marshall stack is the way to go, especially if you have the money, but for home use, big amps are hard to work with because to drive them into distortion, you have to get really loud. They also take up a lot of space.
{"pageName":"[gc] vintage: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
The Line 6 Spider Classic 15 is similar in many ways to the Fender Champion 20. It offers digital simulations of various amplifiers and built-in special effects. The two amps are usually priced identically. The reasons we didn’t make the Spider Classic 15 our top pick is that it’s much larger and heavier than the Fender (about 40 percent overall, at 14.7 by 15.7 by 8.3 inches and 18.4 pounds), and its controls work in an unusual fashion that sometimes frustrated our panelists.
Made famous by Dream Theater guitarist and loyal Mesa Boogie endorsee John Petrucci, the Tri-Axis presents the absolute best of modern rock and metal tone with a touch of that signature Mesa Boogie character. If you scoured the Petrucci forums in the 90’s and early 2000’s, you’d be the first to know John had quite a few of these, both live and in the studio. It was the Tri-Axis that contributed to the now legendary sweet singing tone he achieved on countless DT albums. The first thing you’ll probably notice about the Tri-Axis is it’s unusual interface, which features digital numbers and arrow buttons instead of knobs.  The Tri-Axis also boasts five 12AX7’s into one rack space. Furthermore, you can achieve tones from Mesa amps like the Mark I, Mark IIC+, Mark IV™ and much more.
Are you in earnest need of a guitar and do you want to buy that right now. Well, if the answer to this question is yes, then you will have to stop and think for a while before you actually make the investment. This is because of the fact that buying a guitar is an expensive investment, so you must to be quick to arrive at a decision. Now you should be asking yourself some pretty interesting questions before you buy a guitar so that you do not have to regret later on in any way.
Rule 3 - Experimentation occurs within these groups of effects. While these three major groupings need to follow a strict order, the effects within those groups can be toyed with to invent new sounds. For instance, you can apply a reverb to your echo delay or apply an echo to your reverb. But that general group of time-based effects needs to come at the end of your effects chain, regardless.
Funny, the Dorado was manufactured in Japan during the 70's and the Japanese factory worker must have arbitrarily placed a model number when he or she felt like it. However, it seems that Serial Numbers (presumably in proper sequence) were always assigned and hand written with a black ink pen. My example, while space is present, is void of any model number.
A noise gate allows a signal to pass through only when the signal's intensity is above a set threshold, which opens the gate. If the signal falls below the threshold, the gate closes, and no signal is allowed to pass. A noise gate can be used to control noise. When the level of the 'signal' is above the level of the 'noise', the threshold is set above the level of the 'noise' so that the gate is closed when there is no 'signal'. A noise gate does not remove noise from the signal: when the gate is open, both the signal and the noise will pass through.

With expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with "locking" nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use.

First of all build quality. CTS's sturdy casings, brass shafts and contact patch, solid connections are second to none, and importantly are precision made by a company who have been doing so for a long long time. Fitting a well made pot will mean you'll likely only need to do it once in that guitar, that's important I feel! There are however a lot of different variations of CTS pot, and that is why I now only swear by the 450 Series, and 'TVT' Series, both are constructed with the same components, I like consistency here! Which is why you'll only find these models of pot in my harnesses. I've seen some lower quality series' of CTS pots that have been wildly inconsistent, which I'll get to next..

One half step down from standard Drop A. Used by bands such as Trivium on some songs from Silence in the Snow and The Sin and the Sentence, Destrophy, TesseracT, Brian "Head" Welch, After The Burial on some songs from their Rareform, In Dreams and Dig Deep albums, Within the Ruins, In Hearts Wake and Periphery. Jim Johnston used this tuning for the song "I Bring the Darkness (End of Days)".
Some solid-bodied guitars, such as the Gibson Les Paul Supreme, the PRS Singlecut or the Fender Telecaster Thinline, among others, are built with hollows in the body. These hollows are designed specifically not to interfere with the critical bridge and string anchor point on the solid body. The motivation for this can be to reduce weight, to achieve a semi-hollow tone, or both.
{ "thumbImageID": "Vintage-Modified-Jazz-Bass-70s-Natural/H99641000002000", "defaultDisplayName": "Squier Vintage Modified Jazz Bass '70s", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51373037988286", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Natural-1373037988286.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Natural/H99641000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51373037988376", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Olympic-White-1373037988376.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Olympic-White/H99641000003000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Candy Apple Red", "sku": "sku:site51373037988268", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Candy-Apple-Red-1373037988268.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Candy-Apple-Red/H99641000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.

If they're properly stretched it's usually not a big problem. Usually you can just push down on the new strings around the bridge and the nut and retune a few times to get the slack out, or do the push down/pull up technique to stretch them. I find that most players have more tuning issues from holding down the strings too hard or inadvertently slightly bending them with their fretting hand.
This is an absolutely stunning OM acoustic in MINT/As New Condition. This has been in my personal collection for a few years. In the words of Bill Kraus, the builder: An OM model in my favorite combination of woods: Red spruce top, Honduran rosewood back and sides, curly Koa bindings. I first heard about Bill Kraus from my good friend, Scott Freilich of Top Shelf Music in Buffalo, NY. Scott has been a factory authorized Martin repair center since 1979 and has seen the finest 6 figure pre-war Martins. Scott was raving about Bill Kraus, his knowledge of tonewoods, and the insane quality of his guitars. I also learned that Stan Jay of Mandolin Bros. was equally impressed with Kraus Guitars and had started carrying Bill’s guitars in his store. Every Kraus guitar at Mandolin Bros. has sold!
Edit: After reading everyone's comments I've decided to let the technician give my strat a first time setup and I'll try to absorb any information I can in order to be able to do it myself one day. I realize many of you have some pretty cool guitar shops that'll do a free setup so I'll try to negotiate something. I'll be sure to record the condition of the guitar itself before the setup in case the technician chips it or scratches it. I'll also check out Dan Erlewine's books like the guitarist below suggested. Thank you all for your advice, I really do appreciate it and I hope to be as wise as you all are when it comes to guitars someday.
Everyone from Jazz guitarists to lovers of Queens of the Stone Age style heavy rock have fallen in love with the Artcore series since it was first introduced in 2002. Fusing expert workmanship with affordability, the Ibanez 2017 Artcore AS53 Semi-Acoustic Guitar, Transparent Black Flat is one of the best cheap electric guitars you’ll find on the market today. It’s budget friendly price tag makes it a fantastic choice for beginners whilst the high-quality pickups and superb tonewoods are the reason why so many pro level players will choose it for the stage and studio.
Even though recorded sound traces back to late 1877, the widespread access to this technology has only become available some 60 years later. As we go back in time, reaching 1940s, we run into the first ever instance of reverberation being used in music recording. It didn’t really take long for this trend to become popular, spreading throughout the world. However, back then there were no effects pedals or anything similar. Devices we have today were science fiction at best. Old school producers had to resort to various other means to achieve the reverb effect.
Acoustic guitars are generally larger than electric guitars. They also tend to use heavier-gauge strings. Heavier-gauge strings will require a bit more finger strength than the lighter-gauge strings found on electric guitars. Getting comfortable holding the guitar and fretting notes is important on both acoustics and electrics, but may be slightly more physically challenging with acoustics versus electrics.
Taylor does produce a more budget friendly line of instruments with the 200 series, which is ideal for beginners looking to capture their famous sound at a fraction of the price. Taylor also produces small bodied guitars such as the Baby, Big Baby and GS Mini, which rival their full bodied instruments at a lessened price and are perfect for kids and beginners to learn on (6).

Jeff Beck: select alder body with a thinner C-shaped maple neck, contoured neck heel, rosewood fretboard with 22 medium-jumbo frets, three dual-coil Ceramic Vintage Noiseless pickups with 5-way switching, LSR Roller Nut, Schaller locking tuners and an American 2-point synchronized tremolo with stainless steel saddles. Available in Olympic White and Surf Green finishes (Artist Series, Custom Artist), as well as a “Custom Thinskin Nitro” version with a “Thinskin” nitrocellulose lacquer finish.

SOLD OUT Here we have a great 45 Year old Japanese Vintage 1971 Yamaha FG180 Red Label Nippon Gakki Martin like vintage tone for a fraction shes a Boomer low action plays easily WoW! ... Just in and AVAILABLE JVG- Fresh Release: I can tell you this is a real good one folks! No structural cracks or checking in finish, its a beautiful Solid Spruce Top and it is pretty flat with no noticeable bellying and its bridge is tight, action is excellent within Martin specs... This guitar received the JVGuitars SET -UP upgrade to bone nut and compensated martin saddle as well as the brifg pins upgraded to very nice Rosewood with abalone dot detail as well as a new set of Martin Marquis strings ( 12’s ) 80/20 Phosphorus bronze . The neck has a classic feel to it with an excellent vintage finish still shines like glass …excellent with a classic Martin like feel in a soft V Medium Profile and has the correct relief set to within M spec frets are still good - we leveled and dress them. We first took off the old strings and fully clean the fingerboard and re-hydrate the woods before polishing all surfaces and lubricating the excellent upgraded Ping Deluxe tuners, Not to be confused with the similar model made in Taiwan this the famous Nippon Gakki made in Japan one and this is a really good one at that folks. Never abused, well cared for, no cracks, great neck alignment to this day, action excellent, plastic tone robbing parts - GONE! Bone & Rosewood sustains better than ever…. these are know for great “ M” Like vintage tone and is in great vintage condition,
Someone is going to be very pleased. For a Song Any questions or to contact Joe to buy this contact Joe at: Thank you for your interest Joe ..
Different types of equipment are used to amplify the electric bass and other bass instruments, depending on the performance setting, style of music, the sound desired by the bassist, the size of the venue and other factors, such as whether a bassist is an amateur or professional musician. Professional bassists are more likely to have expensive "boutique" amps and cabinets. All types of bass amps and cabinets are designed to be transportable to shows and recording studios, and as such, most have various features to protect the cabinet (e.g., metal or plastic corner protectors) and speakers (a plastic screen or metal grille) during transportation and move the equipment (a single carry handle is standard for practice amps and combo amps and two handles are sometimes provided for two-handed carrying of large cabinets, and wheels are mounted on some large combo amps and cabinets). Amplifier "heads" may be sold mounted in a wooden cabinet with a carrying handle, or they may be sold as rackmount-able components, which can be screw-mounted in a 19" road case for protection. The speaker enclosures for combo amps and speaker cabinets are typically covered in stiff vinyl, carpet, felt or other sturdy fabric, or painted.
The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.

Unlike many of the other pedals, which are designed to create dramatic or exciting effects, these units take care of the less glamorous (but still very important) jobs in creating your tone. Sound-conditioning effects are the ones that will give the finishing touches to your sound, making the difference between “amateur garage band” and “international touring guitarist.”
That’s not to say Gibson always met expectations during its storied past. “I dreamed of having a Gibson guitar and I achieved that dream,” Hook said. “It was a hollow-bodied EB-1 [a bass guitar] but it was medium scale so it was a s--t guitar and it sounded like s--t and I had to put new strings and a new bridge on it. It still sounded duff so I copied the shape and amalgamated it with a Yamaha.”
By 1970, regular distribution of Japanese-made guitars, including Lyle brand guitars, began in America. In the early 1970s, Arai joined with instrument manufacturing company Matsumoku to produce guitars. It is inconclusive if they continued producing Lyle guitars at this time, but they did launch the Aria Pro II line in 1975, which included set-neck copies of the Gibson Les Paul and SG, and Fender Stratocaster and Telecaster guitars.
The semi hollow construction with sapele top and mahogany back body provide a warm tone that resonates nicely, especially when coupled with the Infinity R Humbuckers. The comfortable medium sized frets make the Ibanez 2017 Artcore AS53 Semi-Acoustic Guitar a great option for the jazz and blues players out there and the high-quality hardware such as ART-ST bridge and tailpiece are reliable and hard wearing.

Welcome to Part 1 of a new Gibson series that will dissect a different breed of effect each week, to tell you—the player—what each does, and how it does it. Effects pedals can be divided into a range of categories of types, but there are undeniably some gray areas between these, since different designs will achieve their sonic ends via different means. The distinctions get blurrier when we throw digital technology into the brew. An analog and a digital chorus, for example, are very different circuits, approached—from the design perspective—from very different standpoints, although the sonic results may sound roughly similar (in the good ones, though, the subtleties are usually quite distinctive).

John Fahey, who died in 2001 at age 61, was American folk guitar's master eccentric, a dazzling fingerpicker who transformed traditional blues forms with the advanced harmonies of modern classical music, then mined that beauty with a prankster's wit. "His music speaks of a boundless freedom," says ex-Captain Beefheart guitarist Gary Lucas. In the Nineties, Fahey switched to a spiky minimalism on electric guitar that made him a post-punk icon. "To be validated by John Fahey," says Thurston Moore, "was really special for our scene."
Silvertone was the “musical” brand for the Sears, Roebuck & Company, beginning nearly a century ago. The big boom was ukuleles in the ’teens and twenties. The first Silvertone product was a hand-cranked phonograph introduced in 1915. Silvertone radios were introduced in the early 1920s. Silvertone guitars appeared in the 1930s, with electric 6-strings appearing in the early ’40s
It looks like a Gibson. but it’s another Epiphone — the Epiphone Les Paul Special II. This is the other iconic shape in electric guitars, the Gibson Les Paul, and Epiphone make the budget-priced version with this one listed at $170. In another blog we’ll explain the primary differences between Gibson and Fender guitars. For now, just know it’s like an Apple versus Windows kind of debate. Really.
These are the settings I use as my basic rack for adding rock guitar sounds in Cubase, and you might also find it handy as a point of departure, so it's worth saving as a track preset. To do this, right‑click in the audio track containing the 'rack', and choose 'Create Track Preset' from the context menu. When the Save Track Preset dialogue box appears, simply name it and save it: now you can call up your rack for any audio track in any Cubase project!
While Line 6 is probably the best known high-volume preset modeling amp brand, Peavey isn’t far behind – and truly rivals the offerings of Line 6, both in quality and quantity. What’s especially intriguing about this particular amp is that it allows you to choose not just the amp models and a wealth of applicable effects, but that it gives you the power to choose the type of instrument you’re plugging into it – thusly shaping the rest of the options accordingly. Whether you play guitar, acoustic guitar, or bass, this amp can change it sound to suit the instrument. And that’s a lot more than other competitors’ amps have to offer. It also features a tap tempo, USB connectivity, a headphone jack, and more.
The guitar output jack typically provides a monaural signal. Many guitars with active electronics use a jack with an extra contact normally used for stereo. These guitars use the extra contact to break the ground connection to the on-board battery to preserve battery life when the guitar is unplugged. These guitars require a mono plug to close the internal switch and connect the battery to ground. Standard guitar cables use a high-impedance 1⁄4 inch (6.35 mm) mono plug. These have a tip and sleeve configuration referred to as a TS phone connector. The voltage is usually around 1 to 9 millivolts.

Most delay pedals have controls for the number of repeats (called “feedback”), the volume of the repeats and the time between each repeat. Some pedals have what’s called “tap tempo”, where you can tap your foot on the pedal and the delay unit will match the speed of the effect to your foot, allowing you to match the delay time to the tempo of a song. Delay pedals are often used to thicken up heavy lead guitar sounds, or to subtly add more to a simple rhythm guitar part.
Their LP models have a "mahogany" body, and the binding is very thin so I think the maple top is just vaneer. I also noticed the headstocks were not the usual LP angle. In my opinion, Epiphone wins hand down. The Strat types don't look much better in my opinion, again, sharp fret ends and awful looking headstock and logo. If you see any of their relic jobs, you'll notice that they range from passable from a distance to hideous from any range.
I bought a Yamaha EC-10 classical at a garage sale for $5.00. It was still in the cardboard box and never played according to the seller. The guitar is full size and looks cool and has real good volume and good bass, but I'd still like to get more bass out of it. I'm thinking of making some modifications to my guitar so that I can fit it with actual bass guitar strings, nylon ones. A friend of mine said I'd wreck up my guitar if I did this. Would I wreck the guitar putting bass strings on it or could I make a bass out of it?
Fender released the first successful solidbody electric guitar, the Broadcaster, in 1950. (Remember, the original Esquires were problematic.) Gibson produced the first Les Paul 24 months later. And a mere six years after that, a small run of sunburst Les Pauls flowed out of Gibson’s Kalamazoo, Michigan factory. Originally just another instrument, those Les Pauls now occupy a mythic status in the minds of guitarists and collectors everywhere. The instruments, along with a small handful of Fender Stratocasters and examples from one or two other manufacturers from roughly the same era, represent the Holy Grail in guitar tones.

As has already become apparent, the resonator instruments which made both the National and Dobro names in the late ’20s and ’30s were not the only effort underway to increase the volume of the guitar. The ampliphonics found immediate acceptance among Hawaiian players, notably Sol Hoopii, the very first to record with them when he used a prototype in his first session for Columbia on October 18, 1926. This was used on “Farewell Blues.” But they still didn’t satisfy the desire of orchestra guitarists to get out of the rhythm section. In addition to metal resonator cones, electricity was waiting in the wings, and National, Dobro and National Dobro would play a significant role, both directly and indirectly, in that ultimately triumphant development.

It's a basic rule of physics (called Faraday's law) that a changing magnetic field produces electricity. So a guitar string will produce electricity only for as long as the magnetic field is changing—in other words, for only as long as the metal string is moving. Once the string stops vibrating, the sound stops. In that respect, an electric guitar is just like an acoustic one.
{"id": "114488369", "categoryId":"site5AAG", "name":"Used Legacy Solid Body Electric Guitar", "pageUrl":"/Used/GL/Legacy-Solid-Body-Electric-Guitar-114488369.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"799.99", "priceMin":"799.99", "priceMax":"799.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"G&L", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"402390681023", "priceVisibility": "", "itemType": "Used"}
Located on the corner of Menaul Boulevard and San Pedro Drive NE, Guitar Center Albuquerque is just a short drive from the Lousiana Blvd. exit off the I-40. Since opening our doors in March of 2004, we've been making the dreams of musicians become realities. We take pride in our dedication to customer service and our in-depth knowledge of the latest and greatest musical trends. We invite you to come check out all we have to offer at Guitar Center Albuquerque. First and foremost in Guitar Center Albuquerque, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales to repairs, our staff in each department is well-trained to cater to music-lovers from all over Albuquerque. Our store is open every day of the week, so there's always a right time to visit even if you're on a busy schedule.
Above all, enjoy playing guitar and enjoy the journey! Look forward to 3, 4, 5 years down the line when, if you've been persistent with your practice time (and allowed plenty of time for noodling), you'll have accomplished so much. This is all about freeing up your creativity, bit by bit, so you can express yourself on guitar as naturally as you can with speech. Doors will open all throughout your progress. Each new door that opens is like a new outlet for your creativity.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: teisco","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"teisco","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
The Rolls-Royce of multi-effects pedals is the Line 6 POD HD500X. As far as the top 5 pedals in this guide, the HD500X is the most full-featured, most complex, and also the priciest. Despite carrying a higher price tag than the others, it comes very highly recommended and landed a solid second place on our list, and this is mostly due to two things:
Looping – These pedals are miniature recorders that capture a passage, which you can then play back as much as you like. Many looper pedals also allow you to layer multiple recordings, and advanced models support extra features like built-in rhythms, mic and other instrument inputs, MIDI, USB and more. It’s worth noting that all the power of a looper pedal does come with a steep learning curve, so be sure that you’re experienced enough to handle one of these bad boys before you bring home one of your own.

What about Derek Trucks? Mark Knopfler? Trey Anastacio? Chuck Berry? Even Eddie Van Halen deserves some credit–more than John Mayer does for guitar playing. John Mayer's fame as a guitarist piggybacks on his commercial success, which is a result of targeting a demographic of 13 year old girls. He's no doubt a skilled guitar player, but over-rated as a guitarist relative to guys like Van Halen, Knopfler, etc.
The first trick I will show you is very simple: you only need to add a bit of distortion to the signal so that the bass line stands out from the mix without making it too heavy. To achieve that, and as awkward as it seems, guitar pedals seem to be more fitting than bass pedals, at least for recording and with this particular technique. Indeed, "crunchy" guitar distortion pedals are usually pretty "poor" in the low end of the frequency spectrum, which makes it easier to mix the distorted signal with the original one. In the following example I used the famous Ibanez Tube Screamer:

Ovation Guitars proudly welcomes home legendary artist Richie Sambora with the launch of two new signature guitars benefitting youth music programs. The famed Bon Jovi songwriter/guitarist and 2018 Rock n’ Roll Hall of Fame inductee will donate royalties from the sales of the all-new Richie Sambora Signature Series Elite Double Neck guitar to the non-profit organization Notes for Notes which builds, equips, and staffs after-school recording studios in Boys & Girls Clubs after school facilities across the United States for youth to explore, create and record music for free.
Fantastic article. I pretty much do all of my recording nowadays through my AxeFX II. Paired with a good set of studio monitors, it’s perfect for the at-home musician who does not want to sacrifice quality. I have a nice Tone King amp and pedalboard with nice boutique pedals like the Strymon Timeline, but when recording it’s so much easier to plug the AxeFX into my laptop. I don’t have to fuss about with mics or room treatment. Also, having three big dogs, it’s great to not worry that they’ll start barking in unison at the mailman when I’m almost finished with a “perfect” take.

An open tuning allows a chord to be played by strumming the strings when "open", or while fretting no strings. The base chord consists of at least three notes and may include all the strings or a subset. The tuning is named for the base chord when played open, typically a major triad, and each major-triad can be played by barring exactly one fret.[60] Open tunings are common in blues and folk music,[59] and they are used in the playing of slide and lap-slide ("Hawaiian") guitars.[60][61] Ry Cooder uses open tunings when he plays slide guitar.[59]
An electric guitar is a guitar that uses one or more pickups to convert the vibration of its strings into electrical signals. The vibration occurs when a guitar player strums, plucks, fingerpicks, or taps the strings. The pickup used to sense the vibration generally uses electromagnetic induction to do so, though other technologies exist. In any case, the signal generated by an electric guitar is too weak to drive a loudspeaker, so it is fed to a guitar amplifier before being sent to the speaker(s), which converts it into audible sound.