You can tell these lists only consist of people who don't dig deep on info of great guitars. Breedlove's USA lines are top shelf. They quality and tone is outstanding and they are a top 5 or 6 company. I have an Oregon Parlor that is quite possibly the best sounding Parlor size guitar I've ever played or heard. And that's a plain Jane American made acoustic. They offer higher end American made stuff. I've played their other body styles and they aren't copying anyone's sound or style. They sound like Breedlove and that's something special. Much like Taylor's have their own sound so do Breedlove.
The strings movement moves the magnetic field creating current in the coil of the pickup. The string does not create the current the movement does. If you placed a solenoid beneath the pickup and moved the pickup you would also create a current in the coil. If you took the strings off the guitar, and held a hammer head over the pickup and activated the solenoid you would get a current in the coil.
The stompswitches take a couple stomps to cut on. There also some tape residue around the led lights where someone covered them. But its not a huge issue for reverb considering that the way I play, I always have a little reverb on to add texture and presence to my tone. Also, if you have a pedal switch looper that you can run all your pedals through it can stay always on that way too. But I'm going set the bidding price lower just because they don't work 100% properly and the tape residue. Other than the issue with the stompswitches the effect works great. Just clarify, you have to stomp on the switch 2 or 3 times and it cuts on.
The Effect: Metal has become the prevalent genre when it comes to music that involves guitars. Dialing in a proper distortion can make or break the sound of your guitar as well as your entire band. Coincidentally, it’s so easy to go overboard with distortion, all while being certain you are on the right track. The very first step is to get a dist box that is suitable for metal. Something like Electro­Harmonix Metal Muff carries just enough punch to get the job done, but not enough to drown your tone completely with gain. You’ll find this to be a reoccurring theme with a number of great metal dist boxes. At the end of the day, it all comes down to your prowess and skill. Every good metal guitarist know that it’s all about the unity of equipment and knowledge. With that said, these pedals will get you started.
To tell you the truth, in the first few years i started playing, after i learned the use of the switch, I was approach by a man that also a guitarist and asked, "YOur guitar sounds good, I believe it so expensive". Well, I bought the guitar only for $150 dollars, But, I toggled the switch to the right pickup on the right time, makes my guitar sounds like an expensive guitar.
Before I start, I want to mention a few things about this particular guitar. It looks and (potentially) sounds great. The neck plays well too, but it has some tuning problems and buzzes a bit more than I’d like. The tuning problems are coming from two areas. Firstly the nut slots are too tight, made evident by the strings making a pinging noise when they are tuned up or down. This means that it is difficult to fine tune, as the string’s pitch tends to “jump” up or down. The second reason for the tuning issues is that the intonation is way out. By that I mean that the saddles’ forwards/backwards positions are not set up well, and so when the open strings are correctly tuned, and we then play up the neck, it suddenly seems out of tune again.

My fave...In love...I vowed not to purchase this game as I was done with Call of Duty but after I watched some YouTube videos and Best Buy was running a good deal on the game I decided to pick it up and give it a try....Number 1 game I really like cod games this is best one you have exo pack can run on walls co op campaign best mutiplayer u got xombies best graphics should be game of the year I price matched it got it at great price and im Gamers Unlocked Member every gamer should get the card for $30 dollars you cant beat that for 2 years
Woodwinds, brass, and similar instruments can only play one note at a time. To make a chord, they have to have a minimum of 3 players playing a single note in the chord at the same time. As you can imagine, this requires excellent timing and coordination between the players to make a clean chord. This is why orchestras have to have a Conductor to direct the music. With a guitar, you are the Conductor, and can make any kind of music you want, all by yourself.

Breedlove Guitars was established in 1990 by luthiers Larry Breedlove and Steve Henderson, while working at Taylor Guitars. After moving to Oregon, Breedlove and Henderson began specializing in custom, fingerstyle six and twelve string guitars. In 1991 the first Breedlove guitar model appeared, after experiments with the JLD bridge truss system and various bracing techniques. Around 1994, Larry’s brother, Kim Breedlove, joined Larry and Steve as a master craftsman. Breedlove strives to be environmentally conscious, and is “dedicated to selecting alternatives to endangered rainforest woods.”[1] Breedlove has since expanded to include mandolins and ukuleles.

Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  250K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.  Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars: supro","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,","prop7":"[gc] used"}
Smaller-scale instruments are produced to assist children in learning the instrument as the smaller scale leads to the frets being closer together, making it easier for smaller hands. The scale-size for the smaller guitars is usually in the range 484–578 mm (19.1–22.8 in), with an instrument length of 785–915 mm (30.9–36.0 in). Full-size instruments are sometimes referred to as 4/4, while the smaller sizes are 3/4, 1/2 or 1/4.
As an active musician in Los Angeles, I often hear guitarists marvel at how good the latest Squier by Fender guitars are for the price. The Squier by Fender HSS Bullet Strat is no exception. A few minor complaints aside, it’s simply a well-made version of a decades-proven design at a very affordable price. All of our panelists felt that it played well, sounded good, and in general felt like a more expensive guitar.
The effect of amplifier coloration can be emulated using a parametric EQ, where you'll probably find you need to add some upper mid-range boost to get the same brightness as from an amp. Note that, if you're using a software amp modelling plug-in, you'll still get the best results if you feed your guitar via a high-impedance DI box — plugging it straight into a soundcard's line input is likely to result in a drop in level and may even affect the sustain and high end of the guitar sound due to the pickups being loaded by the impedance of the input circuitry. This does not apply to active pickup systems which, in effect, function as a combination of pickup and DI box.
Market sentiment is overwhelmingly positive, with many reviewers describing how the Seagull S6 Classic M-450T exceeds their expectations. Build quality and playability gets the bulk of commendations, along with its clear sound and good acoustic projection. Some even dare to compare the Seagull S6 Classic with super expensive guitars from major brands.

The core of this guitar is its twin horn double cutaway mahogany body, which follows after the original SG. But as expected in this entry-level price range, they exchanged what's supposed to be a mahogany neck for maple with 12" radius rosewood fingerboard. Specifications remain faithful to the original, with a scale length of 24.75" and 1.68" nut width. The generic pickups installed sound surprisingly good for the price, but like many have done, the pickups can be easily swapped out for more hard hitting humbuckers to get more out of the guitar.

Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  1 Meg Ohm, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.

STORCH is a virtual instrument, designed with the participation of ambitious music producers and beat-makers. This dynamic software is influenced by the legendary brand sounds of Scott Storch and includes 300 presets, divided into 18 categories of instruments. Categories include: Stringed, Drums, Dirty Pianos, Reversed EPs, 808, Arps and more. Moreover, users can create their own original sound...
Yeah. He may have to sit down when he plays, but he’ll have you on your feet when he does. BB’s creamy yet piercing tone, his unique vibrato and his absolute flawless ability to express his emotions through the guitar earn him a spot in the top ten. King’s years of fame haven’t gone to his head. He is still as humble as ever giving front row seat tickets to fans waiting in a cold parking lot just to have a glimpse of him. BB King can’t play chords. Nor does he sing and play at the same time. But he has worldwide recognition of his accomplishments as an artist. That’s a mark of a truly great guitarist.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Sunburst, Amber
The people at VOX know a thing or two about creating great sounding amps, after all the AC30 is probably one of the most famous amps of all time. The VOX Valvetronix VT40X modelling guitar amp actually recreates the sound of these great amplifiers and so many more. In fact, you have 11 famous amps to choose from which can expand to 20 when using the included Tone Room Editor as well as 13 effects built in. The hybrid digital/analog power amp provides you with all the warmth of a tube amp but with digital stability! If you want more power, you have the VOX VT100x or the smaller version – the VOX VT20X. – offers PCB projects to build guitar and bass effects, and synth modules. All PCBs are professionally manufactured, and include soldermask, a silkscreened component legend, and plated through holes and pads. They are designed to be easy to build, provide simple and clean wiring, to work well with your other pedals, modules, and instruments, and most of all to sound great and provide sounds and features not available in commercial designs. Each PCB comes with a PDF document with wiring diagram, schematic, build notes, and large modding sections with details on how to perform a variety of mods to tailor the design to your needs/taste.
Well that and the effects, but Ample Sound even admits that the effects aren’t the greatest and recommends using another plugin for effects. Them admitting that might put a sour note on your tongue, but when you’re buying a VI in this price range, often it’s better to go for a plugin that is a master of a few components instead of one that attempts it all.
Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.
Not the first commercially available flanger pedal, but probably the first that really worked properly with the full sonic depth of the effect, the A/DA Flanger was made possible by the advent of the SAD1024 chip (others were used through its lifetime, depending upon availability). It hit the shelves in 1977, and was shortly followed by Electro-Harmonix’s equally beloved Electric Mistress, and MXR’s big, gray Flanger. Nearly every big maker slapped its own flanger on the butt and sent it toddling down the pike within the next few years. These were serious pedals in their day, the big boys requiring their own regulated onboard AC power stage to run all that thirsty silicon. Most required a serious investment on behalf of the impoverished guitarist, too. A/DA’s unit retailed at $199.95 when introduced, and others went for even more. Not a steal, when you consider that minimum wage was $2.30 an hour in 1977.
This is one of the most popular and oldest brands of acoustic guitars available in India. There are various brands and models of guitar available under the umbrella of Gibson Guitar Corporation. ES-335, SG, Flying V, and Firebird are one of the most iconic models of guitars produced by this brand and their classic acoustics include the hummingbird. These are ideal guitars that can be used by beginners made in – the USA. The price of Gibson 6-string guitars starts from 4,000 INR approximately.
It is traditional to think that learning guitar initially involves learning lots of chord shapes. I agree that this can be a distraction, and for me, it made the guitar seem more complicated than it is. As well as (or instead of) learning lots of chords 'by rote', an alternative would be to learn a few scales, and learn how to construct chords from those scale shapes.
The RockJam RJEG02 is coming from the hills of RockJam’s successful 15 years of producing some of the best and highly selling brands in the market. This full size, quality guitar contains a whammy bar, a guitar strap, a 10-watt amp, spare strings, electric guitar picks and a gig bag—making it a complete package suitable for the beginner and professional electric guitar player.

Yes, try learning licks before school in a crowded home. Or late at night. Do you want to play or not? Is the simple question. I think I learnt guitar because I could do that all day without bothering anyone. I don't like headphones. Very small amps are OK. But no amp? Yeah. I still do practice scales and stuff unplugged. As a kid I figured out I could brace my guitar against the wardrobe door and it would resonate, great!
The traditional Firebird style pickguard is layered white and black and has Slash's "Skull & Top Hat" log in red. The Mahogany neck is glued to the body with a deep-set neck tenon and has a standard 24.75" scale and a rounded custom "Slash" profile. The Pau Ferro fingerboard has single-ply cream binding with Pearl trapezoid inlays, a nylon nut, and 22 medium jumbo frets along with a 2-way adjustable truss rod. The back of the Firebird's traditional reverse headstock has Slash's Snakepit logo in gold.
Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (Some sources, or maybe just one source quoted all over the net, states that they may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. There are several photos on the net showing David Bowie in his Ziggy Stardust days playing a red Hagstrom with Kent branding on the headstock.
On my bench today, a partscaster with a Hamer Slammer neck, Carvin Rail in the bridge, Ry Cooder Dearmond middle, and PRS P90 in the neck. Wasn’t quite right (throbby) with the usual 3 250K pots and an 022 orange drop (i know, i know, but they aren’t that expensive). So, i went with 500K master vol, 500K master tone (found an old ceramic PRS 022 cap too), and an acme blender pot (neck and bridge) in the last position. Now it’s fun. Lots of variety in positions 1, 2, 4, & 5. 3 knobs and a whammy and she’s done.
At the other end of the size extreme sits a shape called the parlour. Parlour acoustics are among the smallest in body size you can buy – not counting the modern ‘baby’ guitars – and are typically favoured by players of more low-key, less brash musical styles like folk and indie. Once again, the guitar’s distinctive shrunken body shape is another invention from the CF Martin guitar house, with the guitar’s neck typically joining the body around the 12th fret.
Re-amping a DI'd keyboard or bass can really liven up a sound, but if you don't have access to a nice amp or amp modeller, you can simulate the effect by sending the audio to a bus with a delay plug-in set to a short delay time and with the wet signal set to 100 percent and dry to 0 percent. Then send the bus's output to another bus with a distortion (or better still, a guitar amplifier emulator) plug-in inserted. This simulates the delay you get from miking up a speaker, and if you blend this in with the DI'd sound, it can give the recording a live feel — especially if you use a convolution reverb to add some 'room' ambience. You may also want to roll off the very low and high frequencies to help get rid of that DI'd vibe. Nicholas Rowland
Fender, or the Fender Electric Instrument Manufacturing Company, as it was properly known, was started in 1946, in Fullerton, California, by Leo Fender. The early designs effectively wrote the book on the solid body guitar manufacture; his approach of simple guitars using quality parts, easily assembled (most specifically the replaceable neck) proved an immediate sucess. Guitars like the Fender Stratocaster, Telecaster, Jaguar and Precision bass have barely changed since their very first inception; Fender simply got it right first time round.
Guitar effects pedals offer a huge range of possibilities for guitar-sound manipulation―there are literally hundreds of pedals from scores of manufacturers. If you or someone you know is not completely satisfied with the clean, unprocessed sound coming from their guitar and they want to experiment with and modify or color that sound, a great way to tweak it is with effects pedals, also called “stompboxes.” An effects pedal, depending upon its configuration, modifies the sound of a guitar through electrical circuitry or digital modeling via computer chips, either giving it subtle color or dramatic shift. All pedals include knobs on the enclosures that allow the player to adjust the intensity, speed, depth, and shape of the effect in increments, from nuanced color to ear-splitting crunch.
The vast majority of bass amps in the 2010s can be powered solely by AC mains power, obtained by plugging the amp into a wall socket. Inexpensive practice amps may have the AC mains plug hardwired into the unit. Middle-priced to high-priced amplifiers typically have a removable cable and plug, as used with PC computer towers. The benefits of having a removable cable and plug is that if the cable becomes worn or damaged, a new cable can easily be replaced by a layperson. If a hardwired AC mains cable and plug becomes worn or damaged, a qualified technician or electrician will typically be required to replace the cable and plug. Most amps are designed to work for a single voltage. A small number of expensive bass amps designed for touring professionals have user-selectable voltage, which enables a bassist to play with same amp in North America and Europe. A small number of small combo amps can run on both AC mains power and battery power. This enables bassists to play outside where there is no access to power (e.g., for busking on the street). Amps that are battery powered may have a 12 volt input, enabling the unit to be connected to a car battery with alligator clips.

The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 

The PAL Promise is about giving you an unparalleled shopping experience. We want you to be 100% satisfied with every purchase you make from us. We're committed to not only meeting, but exceeding your expectations. We strive to create a lifelong relationship with you and your music, by delivering the best gear in the business at unbeatable prices, top notch tech support, outstanding customer service and a secure safe checkout process. Click Here To Learn More...
This guitar has an interesting makeup of tone wood. First, the body is Mahogany just like the Iron Label model. The top of the guitar is Poplar Burl, where a burl is actually a type of growth on a tree in which the grain has become somewhat deformed. It sounds bizarre but, Burl is highly prized for its rarity and beauty and is often sought after by wood sculptors and luthiers alike.
Smaller combo amps may be easier to transport and set up than using separate amplifier and speaker units, and as such, they are a popular choice for many bass players. Bass players in quieter, more acoustic genres (e.g., jazz quartets which play in a wine bar or a folk music group which plays in a coffeehouse) may be able to use smaller, more modestly powered combo amps. Bassists who play in genres more associated with a high stage volume (e.g., hard rock or electric blues) may tend to use, larger, more powerful (in wattage) combo amps. While a gigging musician will typically only bring one combo amp to a show or recording session, some bassists in major touring bands have two or more combo amps on stage, with an "A/B" switching pedal used to select different amplifiers. In this way, a bassist could have a vintage tube combo amp and a modern solid state amp, and then switch between them to select a different tone for different songs.
PPS: Made from Polyphenlene Sulfide a material commonly used in automobile and computer parts the PPS picks are lightweight but hard enough to ensure picking is strong and precise, so the pick provides accurate attack with a full-bodied tone as it strikes thestring. Silicon rubber based surfacing on each side, makes this pick ideal for fast picking styles. Available in Teardrop and Jazz shapes, and 0.8mm-1.0mm-1.2mm gauges.

Starting in January 1999, Taylor guitars are made with a patented bolt-on neck; the NT neck (new technology). It differs from other necks by using a continuous piece of wood all the way to the 19th fret to support the fretboard.[7] The standard practice is to support the fretboard up to the fourteenth fret with the unsupported portion being glued to the constantly moving soundboard. The NT neck fits into a pocket on the top of the guitar body with the desired angle being achieved by small, accurately milled neck spacers (shims). Over time, some guitars require the neck angle to be realigned (referred to as a neck reset). This process is greatly simplified by allowing the replacement of different sized neck spacers to return the neck to the required angle. Prior to 1999, Taylor Guitars had a simpler bolt-on neck. These guitar necks allow for simple adjustment later if needed. Traditional (Non-Taylor) guitars with a glued neck with a dovetail would need to be disassembled to be adjusted.[8][9]
Extremely long delay times form a looping pedal, which allows performers to record a phrase or passage and play along with it. This allows a solo performer to record an accompaniment or ostinato passage and then, with the looping pedal playing back this passage, perform solo improvisations over the accompaniment. The guitarist creates the loop either on the spot or it is held in storage for later use (as in playback) when needed. Some examples of loops effects are:
These samples are released under the GNU GPL license. The source code being the sf2 files (of which contain the audio samples and settings). The samples and settings can be accessed within Viena and Translator Free on windows or Swami on linux. This license means that you can do what you like with them but if you create any samples from them or improve on them then you have to use the same license in your projects. This way it keeps it open source (and therefore free). This license is only concerned with the source code. Any music you create with them is nothing to do with me (i.e. you take all the royalties and use whatever license you like).
I love this little guitar. it's perfect for my smaller hands to move around on the fretboard. I've been taking guitar lessons for a year and own a full size acoustic and a electric but I love that this one is both. For the price I wish it came with a stand and cable for an amp though but it's a great starter guitar for kids or a person with smaller hands. I would recommend it. it's acoustic and electric. You will need to buy an amp with a cable to use it as an electric but no cable is needed for acoustic. It even has a built in tuner, they supply the batteries.
Here we have another great Yamaha Its Sound is truly WELL beyond its price point someone will be very pleased. aprox..1972-74 YAMAHA FG160 WOW! . ...This is a Gorgeous MARTIN style REPLICA and for the money compares very well to the original in quality materials used..sweet vintage SPRUCE TOP now wonderfully ambered in color from age just too cool, The Back - Sides & Neck are all made from choice AAA Mahogany just what you would expect from an expensive Martin or Gibson...only you would expect to pay much more for one of those , but this is a rare early non "Nippon Gakki" model with the Red Label from Korea.. These early issue Red Label Guitars from Korea utilize the very same materials that were made in Japan. These components were used under strict quality control and 100% assembled in Korea from the very same vintage wood - components & parts as the Japan made Yamaha's. We have had many of these Red Labeled Yamaha's in the 180's & 160's currently and over the years I see up close and in person the very high grade AA mahogany neck s sides & back & the same nice nickel tuners & hardware the very same one piece solid neck no scarf joint at the back of the headstock area like the later Korean & Chinese examples ... This era exhibits just the same just as nice woods as those Japanese big dollar players but " SOME" not all are hidden treasures and are still a real bargain today when compared to the Japanese Red Label versions or a Martin or even Japan made models of this & finish & the materials on this guitar are very nice! This guitar does not take the back seat to the Red Label Nippon Gakki version at all. The action is very EZ to play and the TONE is simply wonderful..The Condition is very good++ to excellent vintage it is not mint,and it is not has natural minor play wear and dings associated with a well loved and played quality guitar it has all the rich patina now of a true vintage acoustic and is quite beautiful in its own right. This guitar has a good history of care its a California guitar where the climate is stable and quite favorable to guitars and was adult owned & loved. This guitar has the preferable a nice MEATY U Shaped Premium Mahogany one piece solid NECK, the frets are still good, The Rosewood is gorgeous too it looks to be Premium grade as well..You will not be disappointed with this guitar at this price the sound is rich like a an expensive $1,000+ guitar, big tone repairs, structural damage..It comes with a new set of Martin strings installed ready to play out of the box. TRULY STUNNING, SEE MORE ... This baby is nice and sweet in person...very nice, , with a classic MARTIN LIKE feel & Sweet-Tone that simply is very hard to beat. The neck is STRAIGHT and the frets are fine w/plenty of life left,this baby plays real nice she stays in tune very well.. .nice workmanship & choice select materials used....You will not be disappointed with this FINE YAMAHA FG160 guitar with NICE TONE & SOUND...its a real Great Player ....This guitars condition is rated at a 8+ Very good+ or better and is very good to excellent condition only a few very minor dings can be seen. this is a real Vintage guitar" and as you can see its in Gorgeous shape!. no known problems cracks-breaks-repairs with no other known issues at all. This one is is 100% READY TO GO!!! its in very good to excellent condition a solid 8+ OR BETTER. This .
Practice amps often have an auxiliary line-in jack, so that the bassist can plug in a recorded music signal (often via an 1/8" jack), to practice along with a recording. The line-in jack can also be used to plug a drum machine into the amp, also for practice purposes. Some practice amps have a level control knob for the line-in input. Practice amps often have a headphone jack, with a feature that turns off the power amplifier when headphones are connected. This feature enables bassists to practice silently at night, to avoid disturbing others in adjoining rooms or apartments. Higher-priced practice amps aimed at pro bassists may have a DI out jack, so that the amp's preamplifier signal can be connected directly to a mixing board for a live show's sound reinforcement system or for a sound recording session. DI out-equipped units effectively turn the practice amp into a preamplifier unit.

Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.

I don't remember if it was actually an LP special II, but the first guitar I bought with my my own money at about the age of 15 was an absolutely beautiful Epi Les Paul. Black, with a really nice quilt maple top. I fell in love with the way it looked. Well, it turned out that guitar sucked. I mean it really sucked. Bad intonation, bad tuners, bad pickups, bad bridge, everything.I saved up my money sacking groceries for like 6 months and I ended up spending that hard-earned money on a crap guitar. I put it on layaway and my dad would drive me up to the store once a month and every time he would try to talk my into other guitars, Fenders mostly (he is a musician also). Nope. I really liked the way the guitar looked. I was young and stupid.

Anyways, it sucks to not have a camera to show stuff or even a way to measure stuff I'm describing. I'll have to obtain a few small things to set it up. like a saddle and an allen wrench that doesn't suck. Probably whatever caliper or shim they use to do real setups as well. Maybe latter frames just have tilted bridges after a while. I don't really know. The bridge is rather thick. If you lower the bridge, do you just sand it?
Gibson and Fender have been ripping the public off for years, they're not even close to being worth what they charge especially Fender with such a mass produced bolt on neck and lame finishes design. Carvin is a superior guitar in every way and what people fail to mention is that you can choose what wood and finish you would like as well as bolt on neck, set neck or neck through designs and their pick up's are impeccable. A truly great guitar co. With excellent customer relations and real musicians will all show respect for Carvin when mentioned if not already owning one.
I just read all of the comments and couldn't believe how long it too for someone (John Corcoran) to mention Les Paul. As for the 'tard who "knows" better players than Robert Johnson, just remember that Johnson INVENTED the sound and everyone else is just copying him or building upon his foundation. This list might work better split up by genre. Segovia may be one of the best guitarists ever, but he doesn't work with the others on the list. Stanley Jordan is incredible, but he'd be out of place on this list. What about Charo – yes, the Coochie Coochie girl from Hollywood Squares plays a mean classical and flamenco guitar! TopTenzMaster – let's see a bunch of subcategory lists…
As a side note, many guitarists refer to the vibrato as “tremolo” or, worse yet, “whammy bar”. (I sometimes do, too, when my mouth is moving unaccompanied by my brain) Vibrato refers to varying the pitch while tremolo is varying the volume. Leo Fender himself is largely responsible for the misuse of the words. He called the bar on his guitars the “tremolo” and even had the tremolo effect on his amplifiers labeled as “Vibrato”.

Jump up ^ This sequence of fifths features the diminished fifth (b,f), which replaces the perfect fifth (b,f♯) containing the chromatic note f♯, which is not a member of the C-major key. The note f (of the C-major scale) is replaced by the note f♯ in the Lydian chromatic scale (Russell, "The fundamental harmonic structure of the Lydian scale", Example 1:7, "The C Lydian scale", p. 5).
I didn’t use any guitar effects. I just used a straight into the amp, and I put the amp up pretty hot, though. The tweeds go up to 12 usually, and this one I had on 10 on the bridge pickup on the Strat. I was using a glass slide. Here’s the slide I was using. It’s like an old medicine bottle. I put some felt in there to make it a little bit of a tighter grip on my finger, but it’s the same slide that Dwayne Allman used.

Guitar effects pedals alter the pitch, tone, and sound of your electric guitar or bass guitar, and as such, it is important to ensure you are armed with as much knowledge about them as possible before making a selection. The alterations made by these effects pedals include acoustic effects, compression, delay, reverb, distortion, overdrive, equalization, loopers, samplers, noise gates, pitch, octave, modulation effects, wah, multi effectors, volume, expression, and filters. They are available from brands such as Boss, MXR, TC Electronic, Electro-Harmonix, Catalinbread, and Fulltone.
Fender Hot Rod Series Pro Junior III 15W 1x10 Combo - This tube-driven guitar combo with a 10” Eminence vintage-cone speaker reproduces the harmonically complex output and sensitivity to playing synamics that vintage Fender tone hounds love. Dual 12AX7 preamp and EL84 power amp tubes crank out the same celebrated midrange as vintage combos. Fender has updated the Pro Junior III with an external speaker jack, a more legible control panel, and internal tweaks.
The Mahogany body and neck with rosewood fretboard makes it a highly resonant and great sounding guitar whilst the dual Alnico Classic pickups with push pull coil tapping provide a world of tonality. A SlimTaper D Shape neck profile makes it comfortable for beginners to learn on, whilst pro players will enjoy the ergonomic design 2 hours into their set or rehearsal! Available in more finishes here.

The Mustang bass debuted in 1966 as (along with the Coronado) Fender's first shortscale bass, however the Competition finishes were not seen until 1969. It was effectively the same instrument, with sports stripes, and initially a matching coloured headstock. The competition colours were Red, Orange and Blue (although blue was officially called Burgundy). Have a closer look at this 1969 Fender and check out the soundclips through various vintage amplifiers.

Guitar distortion is obtained and shaped at various points in the signal processing chain, including multiple stages of preamp distortion, power valve distortion, output and power transformer distortion, and guitar speaker distortion. Much of the distortion character or voicing is controlled by the frequency response before and after each distortion stage. This dependency of distortion voicing on frequency response can be heard in the effect that a wah pedal has on the subsequent distortion stage, or by using tone controls built into the guitar, the preamp or an EQ pedal to favor the bass or treble components of the guitar pickup signal prior to the first distortion stage. Some guitarists place an equalizer pedal after the distortion effect, to emphasize or de-emphasize different frequencies in the distorted signal.
We received a quote so promptly and after already seeing so many other rates in the DFW area, I knew instantly that this was the best value. My 8 year old son is shy and even though he was super interested in learning how to play the guitar, I worried that he’d have a hard time connecting with whoever we chose. After about 5 minutes into the lesson, that fear was long gone. Jack was awesome with him and very patient. He showed up right on time which was great because any parent knows that adding one more thing to an already busy schedule isn’t always the easiest thing to do. Great experience so far!
It was late 1969 early 1970. I was 13 years old and had been learning guitar for about a year when I was given what I considered to be the key to a world of freedom. Mum & Dad said it was ok for me to setup my room in a shed inside Dad’s garage. The shed was the size of a small bedroom, about eight by ten in the old measurements. It was originally built from scraps of recycled building material from a 100 year old house and was initially used as a tool shed.

Custom 24 series have been the bread and butter of PRS for a long time. This guitar has proven to be a really capable axe that can keep up with you no matter where you go in terms of music. A good friend of mine used to own one for a long time, which allowed me to play it numerous times. It’s one of the smoothest and best sounding guitars I’ve ever had a chance to play.

Impossible to avoid this legendary American brand founded in 1946 by Leo Fender. Even if Leo Fender was not the first man to build an electric guitar — only hollow-body and Hawaiian solid-body guitars were available back in those days ─, his first model, the Esquire that became later the Broadcaster and then the famous Telecaster, quickly became a huge success for its versatility. The Telecaster and the Stratocaster, the other famous Fender model, would become standards that have been copied many times. You can hear them in some of the most famous classic rock recordings by the likes of Keith Richard (The Rolling Stones) and Bruce Springsteen (Telecaster), or Eric Clapton and Jimi Hendrix (Stratocaster).
You think those guys are good? They are, but you should hear my uncle- Chris Lambert- and my cousin -Brent Lambert-. My uncle works at the Shadow Box in Columbus (or is it Cincinnati?) Ohio. He plays in a whole bunch of the music shows as a guitarist, and he rocks. Sometimes my cousin works there, too. Brent is just as good as my uncle, and they're both as good as the people you put on here.
• How frets influence action: This is generally a matter of taste, technique and wear. Some players who find they are encountering resistance when they bend strings may need larger frets. If notes sound buzzy or imprecise, the culprit may be too-low frets. On the other hand, frets that are too high can prevent proper intonation. But raising a guitar’s action may be a cheaper solution to correcting the latter problem than a fret replacement.
Last fall, Ubisoft released a new version. But Rocksmith 2014 is considered a replacement rather than an update: The company is trying to rebrand the franchise not as a game but as a teaching tool. The box bears a fat label proclaiming "The fastest way to learn guitar," and Ubisoft launched an ad campaign promising that Rocksmith 2014 could teach prospective shredders to play guitar or bass in just 60 days.
Solid-state amplifiers incorporating transistors and/or op amps can be made to produce hard clipping. When symmetrical, this adds additional high-amplitude odd harmonics, creating a "dirty" or "gritty" tone.[37] When asymmetrical, it produces both even and odd harmonics. Electronically, this is usually achieved by either amplifying the signal to a point where it is clipped by the DC voltage limitation of the power supply rail, or by clipping the signal with diodes.[citation needed] Many solid-state distortion devices attempt to emulate the sound of overdriven vacuum valves using additional solid-state circuitry. Some amplifiers (notably the Marshall JCM 900) utilize hybrid designs that employ both valve and solid-state components.[citation needed]
To build an electric guitar, start by cutting out the guitar body from a piece of wood like maple or swamp ash. Then, bolt a pre-made neck onto the body and attach the bridge. Next, install the pick-ups, volume control, and guitar cord. Finish by putting your strings on the guitar and testing out your instrument. If you want to make the process easier, you could try purchasing an electric guitar kit.
With Dave Matthews playing an electric guitar in place of his usual acoustic, the band delivered a performance of “Samurai Cop (Oh Joy Begin)”, the lead single from Come Tomorrow, their record-breaking seventh-straight album to debut at #1 on the Billboard charts dating back to 1998’s Before These Crowded Streets. You can watch Dave Matthews Band’s performance on Ellen below:
{"eVar4":"shop: guitars","eVar5":"shop: guitars: guitar value packages","pageName":"[mf] shop: guitars: guitar value packages: electric guitar value packages: epiphone","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: guitar value packages","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"epiphone","prop5":"[mf] shop: guitars: guitar value packages: electric guitar value packages","prop6":"[mf] shop: guitars: guitar value packages: electric guitar value packages","prop3":"[mf] shop: guitars: guitar value packages: electric guitar value packages","prop4":"[mf] shop: guitars: guitar value packages: electric guitar value packages","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category2"}
Today's modern rock guitar sounds tend to be "drier" (less room ambiance and reverb), and most often use the close mic technique. There's really nothing to it. Simply use the close mic, run it through the compressor, set the compressor at a 3:1 ratio and adjust the threshold so that the compressor is usually working, but not squashing the signal too much. You will be able to make most of the tone adjustments you need at the amp or guitar, and chances are you won't need to tweak the console' s equalizer at all.
The pitch shifter effect can also be used to detune or “capo” a guitar without the need to actually retune the instrument.  These detuning type pedals have become prominent in the age of dropped tunings and seven string guitars.  The Digitech Whammy Pedal is the most widely known pitch shifter for guitarists and has been used by players like Jonny Greenwood of Radiohead and Tom Morello of Rage Against the Machine fame.
From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.
Bassists can put an incorrect (that is too low) impedance load on their amplifiers even if they connect multiple speakers that are at the correct impedance rating. For example, if a bassist has a combo amp in which the power amp is rated at 4 ohms, and she/he plugs in a second 4 ohm speaker cabinet in parallel, this will drop the impedance ("load") on the amplifier down to 2 ohms, which is too low for the amplifier. When speakers of different impedance are wired up together (e.g., an 8 ohm speaker cabinet and a 4 ohm speaker cab, the impedance is calculated differently). In most applications, when bass speakers are plugged into an amplifier, they are wired in parallel. The parallel "input/output" speaker jacks on the rear of most bass cabinets, when plugged into additional speakers in a "daisy chain" approach, will cause the speakers to be connected in parallel. More rarely, bass speaker cabs may be wired up in series, which means that the impedance is calculated differently. Series wiring is much more complicated and in cases where a bassist is using series wiring, a custom-made cabling system is typically used. Some bass manufacturers that build large speaker cabinets with multiple speakers may wire some of the speakers in series and some in parallel to achieve a certain impedance rating for the entire speaker cabinet (e.g., in 8x10" speaker cabinets, the speakers inside the cabinet may be all wired up in series, but the overall cabinet's "input/output" jacks are in parallel). Professional bass technicians and speaker designers setting up custom-made bass speaker systems for bass players from major bands may use an electronic meter to test the impedance of the speaker cabinets they design.
Cool guitar! You really don’t see many of these anymore. You are correct that it’s similar to the Washburn Wing series, specifically the Washburn Eagle from the late ’70s and early ’80s. In fact, aside from different fretboard inlays and brand names on the headstocks, when you compare the two they’re nearly identical. If this connection seems odd, the occurrence of very similar guitars with different brand names is more common that many of us would think.

In reality, arenas and festival grounds are the only places where anything bigger than a half stack would make sense. In smaller venues, the problem is always the same: amps can't be louder then the drums or the vocals. Listen to any good recording of your favorite bands and you'll notice that the kick drum, snare drum, and vocals are the highest in the mix. If you don't replicate this live the songs sound lost and washed out.
This legendary thinline electric guitar has been in continuous production since 1958 and has been updated for 2019. The new Gibson ES-335 Figured has the classic semi-hollow body construction with a chambered maple center block with a three-ply AAA-grade figured maple/poplar/maple top and back. Its bracing is made of quarter-sawn Adirondack spruce. The center block and bracing are both thermally engineered.
Some guitars have what is called a push-pull knob where pulling the knob will change a setting, or access a different setting. For example, some guitars have one knob when pulled will turn the bridge humbucker pickup as if into a single-coil pickup, which is known as a coil-split. Some guitars like ones from Fender have what is called the Fender S1 switching system where pushing a knob will alter the behavior of the pickup selector.
Consider so-called “vintage” or “’50s-style” wiring, in which the tone pot and cap are connected to the middle lug of the volume pot rather than the usual third lug. Given the sheer number of posts the topic has amassed on guitar-geek sites, you’d think it was an earth-shaking option. Yeah, it’s a cool mod that I happen to dig, but really, the sonic benefit is modest: just a bit less loss of brightness when you dial down the volume.
The device can be mounted on and removed quickly from almost any flat-backed acoustic guitar, using a system of magnetic rails. The ToneWood-Amp is designed for guitars with either a magnetic or piezo pickup (bridge or soundhole), but the team behind the device say they're also putting together a “Technician-Free” pickup bundle for those guitars without a pickup.
“Stoner rock” has to be the most useless classification in the long history of futile attempts to describe what music sounds like. (What rock isn’t stoner rock, amirite?) Despite the misleadingly mellow connotation, the term is really just shorthand for Josh Homme’s thick-necked guitar playing, first in Kyuss, but more famously in Queens of the Stone Age, blending ’70s-vintage proto-metal sludge with high-desert lawlessness, Black Sabbath playing Jesse Pinkman’s house party. Tall, ginger, and wielding a sense of humor as dry as his Mojave stomping grounds, Homme doesn’t exactly look the part of an alt-metal godhead, which only makes the poison easier to swallow.

An excerpt: “The Dobro brand name has been identified with resonator guitars since 1929 and is currently owned by Gibson Guitar Corporation. Despite its registered trademark status, the Dobro name has at times been used generically to refer to woodbodied instruments with 1) an aluminum cone or “resonator” mounted so that the cone opens toward the top of the instrument and 2) an 8-armed spider assembly supporting the bridge.”
The Jeff Beck Oxblood is available in limited numbers. The first 50 of these historic guitars were aged at Gibson Custom to look like Beck’s original, then signed, numbered and played by Beck himself. The next 100 guitars were prepared with Gibson Custom’s V.O.S. finish, bringing the total run to 150 instruments. Each one also comes with a standard Gibson Custom case.
Another acoustic guitar. This one sounds nice for fingerpicking arrangements and in general has a steadier sound than the Ibanez. If I had to choose just one of the guitars it would be this one. This one has a much rounder and fuller sound than the Ibanez. Both guitars go well together as they have different sounds to each other. This sound font also has the same presets as the one above.
thanks for your note. We are not drawing any conclusions whether one is better than the other, just that they are different, which I think is apparent from the samples. Also, we did use only one pickup that we moved between the samples, and mounted it in the exact same location in relationship to the bridge. I would claim that the only variable that could have been controlled to a greater extent is the picking attack.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Frets: 24, Jumbo - # of Strings: 6 - Headstock: 3+3 - Bridge: Floyd Rose Special Tremolo - Cutaway: Single - Hardware: Satin Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickup Configuration: H-H - String Instrument Finish: Transparent Amber Sunburst, Transparent Black, Transparent Red

I want to talk about a session that I got hired for this week. On this particular session, I was asked to recreate a very early-to-mid 70’s guitar tone. Something in the vein of George Harrison. Maybe “All Things Must Pass” era.

So I want to talk about my method, and the process to get this sound. The first key element is guitar and amp. I always start here. I feel like this is the most important relationship in getting any era of sound.
That is why pick-up manufacturers are always careful to explain that their pick-ups will sound different depending on the woods and construction of a guitar. Seymour Duncan (among many others) has written about this a lot, a you can read more on the Seymour Duncan website. You can also study more at the FRETS website, GAL (The Guild of American Luthiers), StewMac, and LMI (Luthier's Mercantile International).
The 85/15 “S” humbuckers here—again, they’re affordable versions of the Custom’s 85/15—are transparent, ‘hi-fi,’ articulate and high-output. Lush while clean and thick when clipped, the pickups have also been coil-split to take you into glassier, single-coil territory. However, you can’t coil-split them individually to form HS or SH combinations, for instance.
{ "thumbImageID": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "defaultDisplayName": "Epiphone Limited Edition SG Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51500000013041", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry-1500000013041.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51500000013040", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue-1500000013040.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Compressor effects help you control the volume variations of your guitar. The compressor basically makes the loud parts softer and the quiet parts louder. This can help you fatten up the sound of your guitar as the overall sound will have much more sustain and often the low-end becomes more pronounced. Some compressor pedals are also sold as sustain pedals, which certainly does give a clearer idea of one of the ways the effect can be used.  
Guitar effects pedals offer a huge range of possibilities for guitar-sound manipulation―there are literally hundreds of pedals from scores of manufacturers. If you or someone you know is not completely satisfied with the clean, unprocessed sound coming from their guitar and they want to experiment with and modify or color that sound, a great way to tweak it is with effects pedals, also called “stompboxes.” An effects pedal, depending upon its configuration, modifies the sound of a guitar through electrical circuitry or digital modeling via computer chips, either giving it subtle color or dramatic shift. All pedals include knobs on the enclosures that allow the player to adjust the intensity, speed, depth, and shape of the effect in increments, from nuanced color to ear-splitting crunch.
10% of our readers voted for brands that were not listed in the survey. So, besides G&L, Jackson, Yamaha, Danelectro, Charvel, Cort, Washburn, Framus, Parker, Dean, B.C Rich, and Aria, you might also want to check Duesenberg, Wild Customs, Mayones, Caparison, Reverend, Blackat, Hagstrom, Peerless, Carvin, Guild, Cole Clark, Seagull, Meloduende, Suhr, Nik Huber, Feline, Ozark, Burns, Ruokangas, and Eko.
As well, even though some bass guitar players in metal and punk bands intentionally use fuzz bass to distort their bass sound, in other genres of music, such as pop, big band jazz and traditional country music, bass players typically seek an undistorted bass sound. To obtain a clear, undistorted bass sound, professional bass players in these genres use high-powered amplifiers with a lot of "headroom" and they may also use audio compressors to prevent sudden volume peaks from causing distortion. In many cases, musicians playing stage pianos or synthesizers use keyboard amplifiers that are designed to reproduce the audio signal with as little distortion as possible. The exceptions with keyboards are the Hammond organ as used in blues and the Fender Rhodes as used in rock music; with these instruments and genres, keyboardists often purposely overdrive a tube amplifier to get a natural overdrive sound. Another example of instrument amplification where as little distortion as possible is sought is with acoustic instrument amplifiers, designed for musicians playing instruments such as the mandolin or fiddle in a folk or bluegrass style.

Arai, Aria, Aria Pro II, Aria Diamond, Apollo, Arita, Barclay, Burny, Capri, Cimar, Cortez (electrics only), Columbus, Conrad, Cutler, Dia, Domino, Electra, Epiphone, Granada, Hi Lo, Howard, Ibanez, Lindberg, Lyle, Luxor, Maxitone (this guitar differs from Tama's Maxitone badge), Mayfair, Memphis, Montclair, Pan, Pearl (electrics only), Raven, Stewart, Tempo, Univox ,Vantage,V entura, Vision, Volhox, Washburn, Westbury, Westminster, Westone

Thank you for supporting Ibanez Collectors Forum. Please help your favorite Ibanez guitar site as we endeavor to bring you the latest information about Ibanez custom vintage electric and acoustic guitars. Here you can discuss ibanez, guitars, ibanez guitars, basses, acoustics, acoustic, mandolins, electric guitar, electric bass, amplifiers, effect pedals, tuners, picks, pickups.
Almost every guitar you see on our website is available in our Chicago guitar showroom. While we carry hard-to-find, top of the line vintage guitars, Rock N Roll Vintage Guitar Shop also carries new guitars and basses from Fender (Squire), Martin, Seagull, Lakland, Hofner, Kay, Hanson, EGC, and other top brands. You can also find top of the line amps including Ampeg, Analog Outfitters, Divided By 13, Fender, Hi-Tone, Laney, Magnatone and Orange to name a few.
Residing between your guitar and your amp, your effects pedals make it possible to change up your sound between songs or even verses. A pedalboard makes it easier to manage and transport all those stompboxes. The longer your effects chain, the more helpful a pedalboard becomes. Keeping all your pedals in one place, a pedalboard helps you stay organized and keeps your effects layout consistent.
At this point you should have the pots, switch, and jack out of the guitar with the pickup wires still connected. You can either de-solder the pickup wires or use wire cutters to clip them off. If you’re replacing the pickups as part of your re-wiring, you can do this now (I did not in the example photographed here). Just feed the leads of the new pickups back through the holes in the pickup cavities.
Some distortion effects provide an "overdrive" effect. Either by using a vacuum tube, or by using simulated tube modeling techniques, the top of the wave form is compressed, thus giving a smoother distorted signal than regular distortion effects. When an overdrive effect is used at a high setting, the sound's waveform can become clipped, which imparts a gritty or "dirty" tone, which sounds like a tube amplifier "driven" to its limit. Used in conjunction with an amplifier, especially a tube amplifier, driven to the point of mild tonal breakup, short of what would be generally considered distortion or overdrive, these pedals can produce extremely thick distortion sounds much like those used by Carlos Santana or Eddie Van Halen. Today there is a huge variety of overdrive pedals, and some of them are:
Your own write-up suggests that the RP500 is "best of the best" for nailing classic amps/effects, and for being affordable; additionally your own write-up suggests Zoom should not be "best of the best" since it's tonally inferior to both the Digitech and the HD500X. Finally, the M5 isn't even a multi-effects pedal. It can model any single effect, that is all: it shouldn't even be mentioned here. Otherwise I like the actual write-ups: they're informative.

hi-can you put two caps on your two tone pots or will just the one do as is mormal-aslo on a push pull pot do you need two tone caps one for the bottom half as regular-if putting on the square part  of the push pull pot -can you put on any of the six lugs ie the ones not used -i have instaleed a push pull swich but when down the tone on the neck pickup does not seem to have any effect -when i pull it when usingn the pull pull it does have a effect is this normal-i have now neck-bridge-and all three in a row-when not pulled which would be normal five wat switch sound i seem to get a telecasster sound ,i thought this was the case when i pull it up=i have now a nice selection of sounds—thankls sean
Rolling Stones best electric guitarist list should've been nicknamed the best average guitarist list. I didn't give this guy the time of day because I thought the bucket thing was to cover up how badly he sucks. Turns out it's the opposite. He's just weird. It's too bad the average person doesn't have the capacity to enjoy this type of advanced music.
: Just in a vintage excellent beauty with a fresh JVGuitars set up is ,New Martin strings bone nut & saddle and solid ebony with brass ring and Abalone inlay bridge pins, all old plastic cheap tone robing parts are tossed out for the JVGuitars TONAL UPGRADE to 2017 specifications otherwise she's ALL ORIGINAL see for yourself She's pretty darn clean and in better than 40 years old average vintage condition For a song. The Takamine F360 was DISCONTINUED decades ago This is the Lawsuit version Specifications Top Sitka Spruce Back Rosewood Sides Rosewood Finger Board Rosewood Electronics None Finish Natural Gloss Faithful D-28 style Dreadnought The most popular body shape of the past half century, the Dreadnought delivers a strong low end with plenty of volume. Structural integrity is excellent as is neck applignment its action is very good low and it plays with ease, new strings and sounds great this fine vintage Japanese instrument is ready for another 40 years of enjoyment. She is not new its actually 40+ years old and has been played, frets are still excellent and have been JVG dressed and she has a few minor and insignificant doinks or scratches and nothing to detour from its vintage patina beauty she's a true vintage quality instrument and is faithfully based on the great D-28 a playable work of art you can hear and enjoy for decades to come. Well taken care of California one adult owner that took really good care over 40 years just for you! Get her before she's gone. any questions or to purchase now contact Joe at .
Jazz guitarist George Barnes is known to have played one of these prototypes in public in 1931, though far as I know, there's no recording of it.  Jack Miller played a "frying pan" in Orville Knapp's orchestra at Grauman's Chinese Theater in early 1932. Another musician, Gauge Brewer, bought two of the first available Beauchamp/Rickenbacher guitars, the other was a more conventional electrified Spanish guitar, and played them in a press event in Kansas, and a series of concerts around Halloween that year. Brewer also recorded both of these sometime in the mid-1930s, but it was one of the old direct-to-record recordings, a one-off, never released to the public (my Mom recorded a bunch of those 78s back in the 1940s and 1950s... tape wasn't quite there yet for regular folks).  Andy Iona was probably the first professional Hawaiian player to go electric.

I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.

Stompboxes are small plastic or metal chassis which usually lie on the floor or in a pedalboard to be operated by the user's feet. Pedals are often rectangle-shaped, but there are a range of other shapes (e.g., the circle-shaped Fuzz Face). Typical simple stompboxes have a single footswitch, one to three potentiometers ("pots" or "knobs") for controlling the effect, and a single LED that indicates if the effect is on. A typical distortion or overdrive pedal's three potentiometers, for example, control the level or intensity of the distortion effect, the tone of the effected signal and the volume (level) of the effected signal. Depending on the type of pedal, the potentiometers may control different parameters of the effect. For a chorus effect, for example, the knobs may control the depth and speed of the effect. Complex stompboxes may have multiple footswitches, many knobs, additional switches or buttons that are operated with the fingers, and an alphanumeric LED display that indicates the status of the effect with short acronyms (e.g., DIST for "distortion").[5][9] Some pedals have two knobs stacked on top of each other, enabling the unit to provide two knobs per single knob space.
This acoustic guitar model has been over the time well renowned as the best selling in the UK. This is owed to its high value and sound quality, accompanied by its trendy design and ease of use. It has a shortened scale length that makes it easy to play, even for beginner guitarists. It mostly comes in a warm natural color and is for the right handed guitarists. It is quite affordable, with prices ranging from around INR 8900. You can click below to find more product details on the official link.

Then, as the most popular version goes, a young, jack of all trades guitarist named Les Paul got tired of all that. So, he set out to create a guitar that could be heard just as much as the louder instruments. He fiddled with a lot of electronic means to boost his sound. Some worked better than others. His piece de resistance at the time would come to be known as "The Log". It looked like what you see up there on the left:

If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.
Gibson sells guitars under a variety of brand names[5] and builds one of the world's most iconic guitars, the Gibson Les Paul. Many Gibson instruments are highly collectible. Gibson was at the forefront of innovation in acoustic guitars, especially in the big band era of the 1930s; the Gibson Super 400 was widely imitated. In 1952, Gibson introduced its first solid-body electric guitar, the Les Paul, which became its most popular guitar to date— designed by Ted McCarty and Les Paul.
It is entirely possible with most guitars. Very rarely will there be a time you will be unable to achieve that same sound with a decent amp. So make sure you do get a quality amp─it doesn't have to be extremely pricey, just good enough. Always make sure your guitar has multiple pickups if you are planning to play different styles of music; it allows for more perfect fine-tuning.

Play a classic 6120 or Duo Jet and it can seem a bit, well, old-fashioned. A growing number of players desire the brand’s looks, sound and unmatched vibe, but also want something a tad more versatile and user-friendly. Enter this latest Players Edition model with its neck set lower into the body for improved access, higher-output Filter’Tron-style humbucking pickup (Full’Trons) and a modernised Bigsby vibrato where through-stringing replaces the notorious ‘hooking the ball-end over a peg’ system that scuppered any chance of a quick change. Mate these modern tweaks with another recent innovation (for Gretsch, at any rate), the Centre Block range, and you have a guitar ready to compete with anything out there - in virtually any style.
It should also be mentioned, that LX does not just stand for U.S. made. Originally LX was an indicator for an Ovation guitar that included several new features that were not available on previous guitar models. Back in 2007 Ovation explained on its website, that the new features included the new OP-Preamp, an advanced neck system (lightweight dual-action truss rod, carbon fibre stabilizers), a patented pick-up (made of 6 elements), inlaid epaulets, scalloped bracing as well as a new hard composite Lyrachord GS body.[25] Back then, no such thing as an AX model line existed (the first AX models appeared on the Ovation-website in 2010). Based on the website’s history the LX features must have been introduced in 2004.
Of all the guitars in the world, this ends up as number 42!?! OK, amateurs, time to tell the truth, these guitars are the best, simply flawless and amazing. Don't talk about your Yamahas or your Ibanez or even Fender for that case! Those are just decent guitars. You will fall in love with the John Petrucci models; they have clobbered, I mean nearly humiliated Gibson. Try these, then think again.
High frequency tweeters, typically horn-loaded, are included in some bass instrument speaker cabinets. Vox's 1960s-era "Super Beatle" amplifier was an early enclosure that used horn tweeters. During the late 1960s Acoustic's 260 Series guitar amp used a treble horn in the dual 15" loudspeaker 261 guitar enclosure, and Kustom's nearly 5-foot-tall (1.5 m) 2J + 1H guitar enclosure used two 15" speakers and a 15" diameter treble horn. Horn-equipped cabinets were not available for bass players until much later.
John and I weeded out a couple of guitars that arrived in far-from-playable condition because we think every guitar should be at least reasonably playable when you buy it. Avi Shabat agreed, saying, “The more messed up a guitar is when I get it, the more I have to charge for setup.” We also didn’t have the short-scale guitars set up, for two reasons: First, we think a guitar for kids—one that’s likely to be purchased at a low price and given as a present—should play acceptably right out of the box with no setup; second, all of the short-scale models we received did play very well out of the box, and all were equipped with strings of the same approximate gauges.
While often overlooked, the speakers are an amp’s most crucial component—they’re the last thing standing between all that electronic gobbledygook and the sound that reaches your ears (except for yo’ mama’s fist, but that’s another story). Different sized speakers have different tonal characteristics, and you should consider speaker sizes the same way you’d consider an amp’s wattage rating. Speakers are like booty—small ones are tighter and big ones have more bottom end. But like a pair of pants, cabinet design can shape bottom end as well. Which is why a closed-back 4x10 cabinet may put out more bass than a 15-inch speaker in an open-back cabinet.

Stephen Ray Vaughan, known as Stevie Ray Vaughan, was an American musician, singer, songwriter, and record producer. In spite of a short-lived mainstream career spanning seven years, he is widely considered one of the most influential electric guitarists in the history of blues music, and one of the most important figures in the revival of blues in the 1980s. AllMusic describes him as "a rocking powerhouse of a guitarist who gave blues a burst of momentum in the '80s, with influence still felt long after his tragic death." Born and raised in Dallas, Texas, Vaughan began playing guitar at the age of seven, inspired by his older brother Jimmie. In 1971 he dropped out of high school, and moved ...more on Wikipedia

I ordered this for my 6 year old nephew for Christmas. He wanted one because I had just recently bought my 3rd. I thought a smaller one would be nice for him to start learning. Just opened the box and the amp doesn’t work! At all! Light turns on but nothing else happens! Hooked guitar up to my own amp and it sounds nice so it’d definitely not the guitar or cords fault. Trying to get a replacement but no luck.
A 100-watt stack is overkill if you live in an apartment and need an amp only for home recording. Conversely, a 10-watt combo is woefully inadequate if you play in a band with a drummer named Thunder Fist. Choose an amp that’s right for your primary application. You’ll need at least 30 watts for playing live with a rock band, but smaller amps often provide surprisingly huge sounds in the studio—just ask Jimmy Page. Also, as a rule of thumb, if you're playing out often, you might want to shoot for at least 15 watts of tube tone.
Chorus and flanging are created in fairly similar ways, the main difference being that chorus doesn't use feedback from the input to the output and generally employs slightly longer delay times. Phasing is similar to both chorus and flanging, but uses much shorter delay times. Feedback may be added to strengthen the swept filter effect it creates. Phasing is far more subtle than flanging and is often used on guitar parts. With chorus, phasing and flanging, the delay time, modulation speed and modulation depth affect the character of the effect very significantly. A generic modulated delay plug-in allows you to create all these effects by simply altering the delay time, feedback, modulation rate and modulation depth parameters. Most of the time, low modulation depths tend to work well for faster LFO speeds (often also referred to as the rate), while deeper modulation works better at slower modulation rates.

You aren’t likely to really know what works best until you get the song a little further along in the mix, when you can hear how the guitar sound sits with the vocals and other instrument tracks. Sometimes, what sounds like the best guitar tone in the room isn’t always the most effective guitar tone in the track, but as ever, at this point you can only take a stab at what you think will work. Through experience, you’ll build a tool kit of go-to mic positions that achieve what you are seeking.
It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.

ACT TRMOLO REPLACING THE STRINGS ACT tremolo allow two styles of string installation. 1) The strings are installed by putting the ball end into the string slot and hooking the ball end below the string catch at the rear of the tremolo unit. 2) The strings are installed by putting the ball end into the string slot and hooking the ball end in the string catch at the bottom of the tremolo unit.

Electronics kit building kind of fell out of favor during the computer age as the home based technology enthusiasts moved to assembling PC’s, and software development. But home brew electronics has enjoyed a resurgence in recent years in what is now called the maker community. Internet electronics stores such as Adafruit and Element 14 are enabling 21st century geeks to build anything from simple circuits to complex embedded computing projects. These sites provide documentation, tutorials, video channels, and of course, a store, where you can purchase the tools and components required to internet enable your toaster, or feed your cat from the couch.

The new Martin electrics were offset double cutaway guitars which, in terms of shape, fall very loosely into a Stratocaster category. The cutaways are a bit wider and shallower than a Strat, both pointing away from the body. The horns are much more rounded than a Strat. Like a Strat, the waist is slightly offset, and the lower bout has a slightly asymmetrical slant to it. The bodies were initially built of hard maple and rosewood laminates that imitate the look of neck-through guitars popular at the time, but actually have neck pockets with glued-in mahogany necks. These had unbound 22-fret rosewood fingerboards, dot inlays and a distinctive three-and-three variation on the old Stauffer/Viennese headstock � which may have originally inspired Leo Fender’s Strat creation � with script CFM logo decal. (Prior to developing the Strat, Fender visited the Martin factory and was shown some of the old Stauffer/Martins with the round-hooked Eastern European headstock shape.) These all featured chrome Sperzel tuners, brass nuts, twin humbuckers, threeway selects, two volume and two tones with chrome dome knobs, and a Leo Quan Badass bridge.
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
An electric guitar is a guitar that uses one or more pickups to convert the vibration of its strings into electrical signals. The vibration occurs when a guitar player strums, plucks, fingerpicks, or taps the strings. The pickup used to sense the vibration generally uses electromagnetic induction to do so, though other technologies exist. In any case, the signal generated by an electric guitar is too weak to drive a loudspeaker, so it is fed to a guitar amplifier before being sent to the speaker(s), which converts it into audible sound.